/* * tclWinChan.c * * Channel drivers for Windows channels based on files, command pipes and * TCP sockets. * * Copyright (c) 1995-1997 Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tclWinInt.h" #include "tclIO.h" /* * State flags used in the info structures below. */ #define FILE_PENDING (1<<0) /* Message is pending in the queue. */ #define FILE_ASYNC (1<<1) /* Channel is non-blocking. */ #define FILE_APPEND (1<<2) /* File is in append mode. */ #define FILE_TYPE_SERIAL (FILE_TYPE_PIPE+1) #define FILE_TYPE_CONSOLE (FILE_TYPE_PIPE+2) /* * The following structure contains per-instance data for a file based * channel. */ typedef struct FileInfo { Tcl_Channel channel; /* Pointer to channel structure. */ int validMask; /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, or TCL_EXCEPTION: indicates * which operations are valid on the file. */ int watchMask; /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, or TCL_EXCEPTION: indicates * which events should be reported. */ int flags; /* State flags, see above for a list. */ HANDLE handle; /* Input/output file. */ struct FileInfo *nextPtr; /* Pointer to next registered file. */ int dirty; /* Boolean flag. Set if the OS may have data * pending on the channel. */ } FileInfo; typedef struct { /* * List of all file channels currently open. */ FileInfo *firstFilePtr; } ThreadSpecificData; static Tcl_ThreadDataKey dataKey; /* * The following structure is what is added to the Tcl event queue when file * events are generated. */ typedef struct { Tcl_Event header; /* Information that is standard for all * events. */ FileInfo *infoPtr; /* Pointer to file info structure. Note that * we still have to verify that the file * exists before dereferencing this * pointer. */ } FileEvent; /* * Static routines for this file: */ static int FileBlockProc(ClientData instanceData, int mode); static void FileChannelExitHandler(ClientData clientData); static void FileCheckProc(ClientData clientData, int flags); static int FileCloseProc(ClientData instanceData, Tcl_Interp *interp); static int FileEventProc(Tcl_Event *evPtr, int flags); static int FileGetHandleProc(ClientData instanceData, int direction, ClientData *handlePtr); static ThreadSpecificData *FileInit(void); static int FileInputProc(ClientData instanceData, char *buf, int toRead, int *errorCode); static int FileOutputProc(ClientData instanceData, const char *buf, int toWrite, int *errorCode); static int FileSeekProc(ClientData instanceData, long offset, int mode, int *errorCode); static Tcl_WideInt FileWideSeekProc(ClientData instanceData, Tcl_WideInt offset, int mode, int *errorCode); static void FileSetupProc(ClientData clientData, int flags); static void FileWatchProc(ClientData instanceData, int mask); static void FileThreadActionProc(ClientData instanceData, int action); static int FileTruncateProc(ClientData instanceData, Tcl_WideInt length); static DWORD FileGetType(HANDLE handle); static int NativeIsComPort(const WCHAR *nativeName); /* * This structure describes the channel type structure for file based IO. */ static const Tcl_ChannelType fileChannelType = { "file", /* Type name. */ TCL_CHANNEL_VERSION_5, /* v5 channel */ FileCloseProc, /* Close proc. */ FileInputProc, /* Input proc. */ FileOutputProc, /* Output proc. */ FileSeekProc, /* Seek proc. */ NULL, /* Set option proc. */ NULL, /* Get option proc. */ FileWatchProc, /* Set up the notifier to watch the channel. */ FileGetHandleProc, /* Get an OS handle from channel. */ NULL, /* close2proc. */ FileBlockProc, /* Set blocking or non-blocking mode.*/ NULL, /* flush proc. */ NULL, /* handler proc. */ FileWideSeekProc, /* Wide seek proc. */ FileThreadActionProc, /* Thread action proc. */ FileTruncateProc /* Truncate proc. */ }; /* * General useful clarification macros. */ #define SET_FLAG(var, flag) ((var) |= (flag)) #define CLEAR_FLAG(var, flag) ((var) &= ~(flag)) #define TEST_FLAG(value, flag) (((value) & (flag)) != 0) /* *---------------------------------------------------------------------- * * FileInit -- * * This function creates the window used to simulate file events. * * Results: * None. * * Side effects: * Creates a new window and creates an exit handler. * *---------------------------------------------------------------------- */ static ThreadSpecificData * FileInit(void) { ThreadSpecificData *tsdPtr = (ThreadSpecificData *) TclThreadDataKeyGet(&dataKey); if (tsdPtr == NULL) { tsdPtr = TCL_TSD_INIT(&dataKey); tsdPtr->firstFilePtr = NULL; Tcl_CreateEventSource(FileSetupProc, FileCheckProc, NULL); Tcl_CreateThreadExitHandler(FileChannelExitHandler, NULL); } return tsdPtr; } /* *---------------------------------------------------------------------- * * FileChannelExitHandler -- * * This function is called to cleanup the channel driver before Tcl is * unloaded. * * Results: * None. * * Side effects: * Destroys the communication window. * *---------------------------------------------------------------------- */ static void FileChannelExitHandler( ClientData clientData) /* Old window proc */ { Tcl_DeleteEventSource(FileSetupProc, FileCheckProc, NULL); } /* *---------------------------------------------------------------------- * * FileSetupProc -- * * This function is invoked before Tcl_DoOneEvent blocks waiting for an * event. * * Results: * None. * * Side effects: * Adjusts the block time if needed. * *---------------------------------------------------------------------- */ void FileSetupProc( ClientData data, /* Not used. */ int flags) /* Event flags as passed to Tcl_DoOneEvent. */ { FileInfo *infoPtr; Tcl_Time blockTime = { 0, 0 }; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if (!TEST_FLAG(flags, TCL_FILE_EVENTS)) { return; } /* * Check to see if there is a ready file. If so, poll. */ for (infoPtr = tsdPtr->firstFilePtr; infoPtr != NULL; infoPtr = infoPtr->nextPtr) { if (infoPtr->watchMask) { Tcl_SetMaxBlockTime(&blockTime); break; } } } /* *---------------------------------------------------------------------- * * FileCheckProc -- * * This function is called by Tcl_DoOneEvent to check the file event * source for events. * * Results: * None. * * Side effects: * May queue an event. * *---------------------------------------------------------------------- */ static void FileCheckProc( ClientData data, /* Not used. */ int flags) /* Event flags as passed to Tcl_DoOneEvent. */ { FileEvent *evPtr; FileInfo *infoPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if (!TEST_FLAG(flags, TCL_FILE_EVENTS)) { return; } /* * Queue events for any ready files that don't already have events queued * (caused by persistent states that won't generate WinSock events). */ for (infoPtr = tsdPtr->firstFilePtr; infoPtr != NULL; infoPtr = infoPtr->nextPtr) { if (infoPtr->watchMask && !TEST_FLAG(infoPtr->flags, FILE_PENDING)) { SET_FLAG(infoPtr->flags, FILE_PENDING); evPtr = ckalloc(sizeof(FileEvent)); evPtr->header.proc = FileEventProc; evPtr->infoPtr = infoPtr; Tcl_QueueEvent((Tcl_Event *) evPtr, TCL_QUEUE_TAIL); } } } /* *---------------------------------------------------------------------- * * FileEventProc -- * * This function is invoked by Tcl_ServiceEvent when a file event reaches * the front of the event queue. This function invokes Tcl_NotifyChannel * on the file. * * Results: * Returns 1 if the event was handled, meaning it should be removed from * the queue. Returns 0 if the event was not handled, meaning it should * stay on the queue. The only time the event isn't handled is if the * TCL_FILE_EVENTS flag bit isn't set. * * Side effects: * Whatever the notifier callback does. * *---------------------------------------------------------------------- */ static int FileEventProc( Tcl_Event *evPtr, /* Event to service. */ int flags) /* Flags that indicate what events to handle, * such as TCL_FILE_EVENTS. */ { FileEvent *fileEvPtr = (FileEvent *)evPtr; FileInfo *infoPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if (!TEST_FLAG(flags, TCL_FILE_EVENTS)) { return 0; } /* * Search through the list of watched files for the one whose handle * matches the event. We do this rather than simply dereferencing the * handle in the event so that files can be deleted while the event is in * the queue. */ for (infoPtr = tsdPtr->firstFilePtr; infoPtr != NULL; infoPtr = infoPtr->nextPtr) { if (fileEvPtr->infoPtr == infoPtr) { CLEAR_FLAG(infoPtr->flags, FILE_PENDING); Tcl_NotifyChannel(infoPtr->channel, infoPtr->watchMask); break; } } return 1; } /* *---------------------------------------------------------------------- * * FileBlockProc -- * * Set blocking or non-blocking mode on channel. * * Results: * 0 if successful, errno when failed. * * Side effects: * Sets the device into blocking or non-blocking mode. * *---------------------------------------------------------------------- */ static int FileBlockProc( ClientData instanceData, /* Instance data for channel. */ int mode) /* TCL_MODE_BLOCKING or * TCL_MODE_NONBLOCKING. */ { FileInfo *infoPtr = instanceData; /* * Files on Windows can not be switched between blocking and nonblocking, * hence we have to emulate the behavior. This is done in the input * function by checking against a bit in the state. We set or unset the * bit here to cause the input function to emulate the correct behavior. */ if (mode == TCL_MODE_NONBLOCKING) { SET_FLAG(infoPtr->flags, FILE_ASYNC); } else { CLEAR_FLAG(infoPtr->flags, FILE_ASYNC); } return 0; } /* *---------------------------------------------------------------------- * * FileCloseProc -- * * Closes the IO channel. * * Results: * 0 if successful, the value of errno if failed. * * Side effects: * Closes the physical channel * *---------------------------------------------------------------------- */ static int FileCloseProc( ClientData instanceData, /* Pointer to FileInfo structure. */ Tcl_Interp *interp) /* Not used. */ { FileInfo *fileInfoPtr = instanceData; FileInfo *infoPtr; ThreadSpecificData *tsdPtr; int errorCode = 0; /* * Remove the file from the watch list. */ FileWatchProc(instanceData, 0); /* * Don't close the Win32 handle if the handle is a standard channel during * the thread exit process. Otherwise, one thread may kill the stdio of * another. */ if (!TclInThreadExit() || ((GetStdHandle(STD_INPUT_HANDLE) != fileInfoPtr->handle) && (GetStdHandle(STD_OUTPUT_HANDLE) != fileInfoPtr->handle) && (GetStdHandle(STD_ERROR_HANDLE) != fileInfoPtr->handle))) { if (CloseHandle(fileInfoPtr->handle) == FALSE) { TclWinConvertError(GetLastError()); errorCode = errno; } } /* * See if this FileInfo* is still on the thread local list. */ tsdPtr = TCL_TSD_INIT(&dataKey); for (infoPtr = tsdPtr->firstFilePtr; infoPtr != NULL; infoPtr = infoPtr->nextPtr) { if (infoPtr == fileInfoPtr) { /* * This channel exists on the thread local list. It should have * been removed by an earlier Threadaction call, but do that now * since just deallocating fileInfoPtr would leave an deallocated * pointer on the thread local list. */ FileThreadActionProc(fileInfoPtr,TCL_CHANNEL_THREAD_REMOVE); break; } } ckfree(fileInfoPtr); return errorCode; } /* *---------------------------------------------------------------------- * * FileSeekProc -- * * Seeks on a file-based channel. Returns the new position. * * Results: * -1 if failed, the new position if successful. If failed, it also sets * *errorCodePtr to the error code. * * Side effects: * Moves the location at which the channel will be accessed in future * operations. * *---------------------------------------------------------------------- */ static int FileSeekProc( ClientData instanceData, /* File state. */ long offset, /* Offset to seek to. */ int mode, /* Relative to where should we seek? */ int *errorCodePtr) /* To store error code. */ { FileInfo *infoPtr = instanceData; LONG newPos, newPosHigh, oldPos, oldPosHigh; DWORD moveMethod; *errorCodePtr = 0; if (mode == SEEK_SET) { moveMethod = FILE_BEGIN; } else if (mode == SEEK_CUR) { moveMethod = FILE_CURRENT; } else { moveMethod = FILE_END; } /* * Save our current place in case we need to roll-back the seek. */ oldPosHigh = 0; oldPos = SetFilePointer(infoPtr->handle, 0, &oldPosHigh, FILE_CURRENT); if (oldPos == (LONG) INVALID_SET_FILE_POINTER) { DWORD winError = GetLastError(); if (winError != NO_ERROR) { TclWinConvertError(winError); *errorCodePtr = errno; return -1; } } newPosHigh = (offset < 0 ? -1 : 0); newPos = SetFilePointer(infoPtr->handle, offset, &newPosHigh, moveMethod); if (newPos == (LONG) INVALID_SET_FILE_POINTER) { DWORD winError = GetLastError(); if (winError != NO_ERROR) { TclWinConvertError(winError); *errorCodePtr = errno; return -1; } } /* * Check for expressability in our return type, and roll-back otherwise. */ if (newPosHigh != 0) { *errorCodePtr = EOVERFLOW; SetFilePointer(infoPtr->handle, oldPos, &oldPosHigh, FILE_BEGIN); return -1; } return (int) newPos; } /* *---------------------------------------------------------------------- * * FileWideSeekProc -- * * Seeks on a file-based channel. Returns the new position. * * Results: * -1 if failed, the new position if successful. If failed, it also sets * *errorCodePtr to the error code. * * Side effects: * Moves the location at which the channel will be accessed in future * operations. * *---------------------------------------------------------------------- */ static Tcl_WideInt FileWideSeekProc( ClientData instanceData, /* File state. */ Tcl_WideInt offset, /* Offset to seek to. */ int mode, /* Relative to where should we seek? */ int *errorCodePtr) /* To store error code. */ { FileInfo *infoPtr = instanceData; DWORD moveMethod; LONG newPos, newPosHigh; *errorCodePtr = 0; if (mode == SEEK_SET) { moveMethod = FILE_BEGIN; } else if (mode == SEEK_CUR) { moveMethod = FILE_CURRENT; } else { moveMethod = FILE_END; } newPosHigh = (LONG)(offset >> 32); newPos = SetFilePointer(infoPtr->handle, (LONG)offset, &newPosHigh, moveMethod); if (newPos == (LONG) INVALID_SET_FILE_POINTER) { DWORD winError = GetLastError(); if (winError != NO_ERROR) { TclWinConvertError(winError); *errorCodePtr = errno; return -1; } } return (((Tcl_WideInt)((unsigned)newPos)) | ((Tcl_WideInt)newPosHigh << 32)); } /* *---------------------------------------------------------------------- * * FileTruncateProc -- * * Truncates a file-based channel. Returns the error code. * * Results: * 0 if successful, POSIX-y error code if it failed. * * Side effects: * Truncates the file, may move file pointers too. * *---------------------------------------------------------------------- */ static int FileTruncateProc( ClientData instanceData, /* File state. */ Tcl_WideInt length) /* Length to truncate at. */ { FileInfo *infoPtr = instanceData; LONG newPos, newPosHigh, oldPos, oldPosHigh; /* * Save where we were... */ oldPosHigh = 0; oldPos = SetFilePointer(infoPtr->handle, 0, &oldPosHigh, FILE_CURRENT); if (oldPos == (LONG) INVALID_SET_FILE_POINTER) { DWORD winError = GetLastError(); if (winError != NO_ERROR) { TclWinConvertError(winError); return errno; } } /* * Move to where we want to truncate */ newPosHigh = (LONG)(length >> 32); newPos = SetFilePointer(infoPtr->handle, (LONG)length, &newPosHigh, FILE_BEGIN); if (newPos == (LONG) INVALID_SET_FILE_POINTER) { DWORD winError = GetLastError(); if (winError != NO_ERROR) { TclWinConvertError(winError); return errno; } } /* * Perform the truncation (unlike POSIX ftruncate(), we needed to move to * the location to truncate at first). */ if (!SetEndOfFile(infoPtr->handle)) { TclWinConvertError(GetLastError()); return errno; } /* * Move back. If this last step fails, we don't care; it's just a "best * effort" attempt to restore our file pointer to where it was. */ SetFilePointer(infoPtr->handle, oldPos, &oldPosHigh, FILE_BEGIN); return 0; } /* *---------------------------------------------------------------------- * * FileInputProc -- * * Reads input from the IO channel into the buffer given. Returns count * of how many bytes were actually read, and an error indication. * * Results: * A count of how many bytes were read is returned and an error * indication is returned in an output argument. * * Side effects: * Reads input from the actual channel. * *---------------------------------------------------------------------- */ static int FileInputProc( ClientData instanceData, /* File state. */ char *buf, /* Where to store data read. */ int bufSize, /* Num bytes available in buffer. */ int *errorCode) /* Where to store error code. */ { FileInfo *infoPtr = instanceData; DWORD bytesRead; *errorCode = 0; /* * TODO: This comment appears to be out of date. We *do* have a console * driver, over in tclWinConsole.c. After some Windows developer confirms, * this comment should be revised. * * Note that we will block on reads from a console buffer until a full * line has been entered. The only way I know of to get around this is to * write a console driver. We should probably do this at some point, but * for now, we just block. The same problem exists for files being read * over the network. */ if (ReadFile(infoPtr->handle, (LPVOID) buf, (DWORD) bufSize, &bytesRead, (LPOVERLAPPED) NULL) != FALSE) { return bytesRead; } TclWinConvertError(GetLastError()); *errorCode = errno; if (errno == EPIPE) { return 0; } return -1; } /* *---------------------------------------------------------------------- * * FileOutputProc -- * * Writes the given output on the IO channel. Returns count of how many * characters were actually written, and an error indication. * * Results: * A count of how many characters were written is returned and an error * indication is returned in an output argument. * * Side effects: * Writes output on the actual channel. * *---------------------------------------------------------------------- */ static int FileOutputProc( ClientData instanceData, /* File state. */ const char *buf, /* The data buffer. */ int toWrite, /* How many bytes to write? */ int *errorCode) /* Where to store error code. */ { FileInfo *infoPtr = instanceData; DWORD bytesWritten; *errorCode = 0; /* * If we are writing to a file that was opened with O_APPEND, we need to * seek to the end of the file before writing the current buffer. */ if (TEST_FLAG(infoPtr->flags, FILE_APPEND)) { SetFilePointer(infoPtr->handle, 0, NULL, FILE_END); } if (WriteFile(infoPtr->handle, (LPVOID) buf, (DWORD) toWrite, &bytesWritten, (LPOVERLAPPED) NULL) == FALSE) { TclWinConvertError(GetLastError()); *errorCode = errno; return -1; } infoPtr->dirty = 1; return bytesWritten; } /* *---------------------------------------------------------------------- * * FileWatchProc -- * * Called by the notifier to set up to watch for events on this channel. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ static void FileWatchProc( ClientData instanceData, /* File state. */ int mask) /* What events to watch for; OR-ed combination * of TCL_READABLE, TCL_WRITABLE and * TCL_EXCEPTION. */ { FileInfo *infoPtr = instanceData; Tcl_Time blockTime = { 0, 0 }; /* * Since the file is always ready for events, we set the block time to * zero so we will poll. */ infoPtr->watchMask = mask & infoPtr->validMask; if (infoPtr->watchMask) { Tcl_SetMaxBlockTime(&blockTime); } } /* *---------------------------------------------------------------------- * * FileGetHandleProc -- * * Called from Tcl_GetChannelHandle to retrieve OS handles from a file * based channel. * * Results: * Returns TCL_OK with the fd in handlePtr, or TCL_ERROR if there is no * handle for the specified direction. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int FileGetHandleProc( ClientData instanceData, /* The file state. */ int direction, /* TCL_READABLE or TCL_WRITABLE */ ClientData *handlePtr) /* Where to store the handle. */ { FileInfo *infoPtr = instanceData; if (!TEST_FLAG(direction, infoPtr->validMask)) { return TCL_ERROR; } *handlePtr = (ClientData) infoPtr->handle; return TCL_OK; } /* *---------------------------------------------------------------------- * * TclpOpenFileChannel -- * * Open an File based channel on Unix systems. * * Results: * The new channel or NULL. If NULL, the output argument errorCodePtr is * set to a POSIX error. * * Side effects: * May open the channel and may cause creation of a file on the file * system. * *---------------------------------------------------------------------- */ Tcl_Channel TclpOpenFileChannel( Tcl_Interp *interp, /* Interpreter for error reporting; can be * NULL. */ Tcl_Obj *pathPtr, /* Name of file to open. */ int mode, /* POSIX mode. */ int permissions) /* If the open involves creating a file, with * what modes to create it? */ { Tcl_Channel channel = 0; int channelPermissions = 0; DWORD accessMode = 0, createMode, shareMode, flags; const WCHAR *nativeName; HANDLE handle; char channelName[16 + TCL_INTEGER_SPACE]; TclFile readFile = NULL, writeFile = NULL; nativeName = Tcl_FSGetNativePath(pathPtr); if (nativeName == NULL) { if (interp) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "couldn't open \"%s\": filename is invalid on this platform", TclGetString(pathPtr))); } return NULL; } switch (mode & (O_RDONLY | O_WRONLY | O_RDWR)) { case O_RDONLY: accessMode = GENERIC_READ; channelPermissions = TCL_READABLE; break; case O_WRONLY: accessMode = GENERIC_WRITE; channelPermissions = TCL_WRITABLE; break; case O_RDWR: accessMode = (GENERIC_READ | GENERIC_WRITE); channelPermissions = (TCL_READABLE | TCL_WRITABLE); break; default: Tcl_Panic("TclpOpenFileChannel: invalid mode value"); break; } /* * Map the creation flags to the NT create mode. */ switch (mode & (O_CREAT | O_EXCL | O_TRUNC)) { case (O_CREAT | O_EXCL): case (O_CREAT | O_EXCL | O_TRUNC): createMode = CREATE_NEW; break; case (O_CREAT | O_TRUNC): createMode = CREATE_ALWAYS; break; case O_CREAT: createMode = OPEN_ALWAYS; break; case O_TRUNC: case (O_TRUNC | O_EXCL): createMode = TRUNCATE_EXISTING; break; default: createMode = OPEN_EXISTING; break; } /* * [2413550] Avoid double-open of serial ports on Windows. Special * handling for Windows serial ports by a "name-hint" to directly open it * with the OVERLAPPED flag set. */ if (NativeIsComPort(nativeName)) { handle = TclWinSerialOpen(INVALID_HANDLE_VALUE, nativeName, accessMode); if (handle == INVALID_HANDLE_VALUE) { TclWinConvertError(GetLastError()); if (interp) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "couldn't open serial \"%s\": %s", TclGetString(pathPtr), Tcl_PosixError(interp))); } return NULL; } /* * For natively named Windows serial ports we are done. */ channel = TclWinOpenSerialChannel(handle, channelName, channelPermissions); return channel; } /* * If the file is being created, get the file attributes from the * permissions argument, else use the existing file attributes. */ if (TEST_FLAG(mode, O_CREAT)) { if (TEST_FLAG(permissions, S_IWRITE)) { flags = FILE_ATTRIBUTE_NORMAL; } else { flags = FILE_ATTRIBUTE_READONLY; } } else { flags = GetFileAttributes(nativeName); if (flags == 0xFFFFFFFF) { flags = 0; } } /* * Set up the file sharing mode. We want to allow simultaneous access. */ shareMode = FILE_SHARE_READ | FILE_SHARE_WRITE; /* * Now we get to create the file. */ handle = CreateFile(nativeName, accessMode, shareMode, NULL, createMode, flags, (HANDLE) NULL); if (handle == INVALID_HANDLE_VALUE) { DWORD err = GetLastError(); if ((err & 0xffffL) == ERROR_OPEN_FAILED) { err = TEST_FLAG(mode, O_CREAT) ? ERROR_FILE_EXISTS : ERROR_FILE_NOT_FOUND; } TclWinConvertError(err); if (interp) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "couldn't open \"%s\": %s", TclGetString(pathPtr), Tcl_PosixError(interp))); } return NULL; } channel = NULL; switch (FileGetType(handle)) { case FILE_TYPE_SERIAL: /* * Natively named serial ports "com1-9", "\\\\.\\comXX" are already * done with the code above. Here we handle all other serial port * names. * * Reopen channel for OVERLAPPED operation. Normally this shouldn't * fail, because the channel exists. */ handle = TclWinSerialOpen(handle, nativeName, accessMode); if (handle == INVALID_HANDLE_VALUE) { TclWinConvertError(GetLastError()); if (interp) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "couldn't reopen serial \"%s\": %s", TclGetString(pathPtr), Tcl_PosixError(interp))); } return NULL; } channel = TclWinOpenSerialChannel(handle, channelName, channelPermissions); break; case FILE_TYPE_CONSOLE: channel = TclWinOpenConsoleChannel(handle, channelName, channelPermissions); break; case FILE_TYPE_PIPE: if (TEST_FLAG(channelPermissions, TCL_READABLE)) { readFile = TclWinMakeFile(handle); } if (TEST_FLAG(channelPermissions, TCL_WRITABLE)) { writeFile = TclWinMakeFile(handle); } channel = TclpCreateCommandChannel(readFile, writeFile, NULL, 0, NULL); break; case FILE_TYPE_CHAR: case FILE_TYPE_DISK: case FILE_TYPE_UNKNOWN: channel = TclWinOpenFileChannel(handle, channelName, channelPermissions, TEST_FLAG(mode, O_APPEND) ? FILE_APPEND : 0); break; default: /* * The handle is of an unknown type, probably /dev/nul equivalent or * possibly a closed handle. */ channel = NULL; Tcl_SetObjResult(interp, Tcl_ObjPrintf( "couldn't open \"%s\": bad file type", TclGetString(pathPtr))); Tcl_SetErrorCode(interp, "TCL", "VALUE", "CHANNEL", "BAD_TYPE", NULL); break; } return channel; } /* *---------------------------------------------------------------------- * * Tcl_MakeFileChannel -- * * Creates a Tcl_Channel from an existing platform specific file handle. * * Results: * The Tcl_Channel created around the preexisting file. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Channel Tcl_MakeFileChannel( ClientData rawHandle, /* OS level handle */ int mode) /* ORed combination of TCL_READABLE and * TCL_WRITABLE to indicate file mode. */ { #if defined(HAVE_NO_SEH) && !defined(_WIN64) TCLEXCEPTION_REGISTRATION registration; #endif char channelName[16 + TCL_INTEGER_SPACE]; Tcl_Channel channel = NULL; HANDLE handle = (HANDLE) rawHandle; HANDLE dupedHandle; TclFile readFile = NULL, writeFile = NULL; BOOL result; if (mode == 0) { return NULL; } switch (FileGetType(handle)) { case FILE_TYPE_SERIAL: channel = TclWinOpenSerialChannel(handle, channelName, mode); break; case FILE_TYPE_CONSOLE: channel = TclWinOpenConsoleChannel(handle, channelName, mode); break; case FILE_TYPE_PIPE: if (TEST_FLAG(mode, TCL_READABLE)) { readFile = TclWinMakeFile(handle); } if (TEST_FLAG(mode, TCL_WRITABLE)) { writeFile = TclWinMakeFile(handle); } channel = TclpCreateCommandChannel(readFile, writeFile, NULL, 0, NULL); break; case FILE_TYPE_DISK: case FILE_TYPE_CHAR: channel = TclWinOpenFileChannel(handle, channelName, mode, 0); break; case FILE_TYPE_UNKNOWN: default: /* * The handle is of an unknown type. Test the validity of this OS * handle by duplicating it, then closing the dupe. The Win32 API * doesn't provide an IsValidHandle() function, so we have to emulate * it here. This test will not work on a console handle reliably, * which is why we can't test every handle that comes into this * function in this way. */ result = DuplicateHandle(GetCurrentProcess(), handle, GetCurrentProcess(), &dupedHandle, 0, FALSE, DUPLICATE_SAME_ACCESS); if (result == 0) { /* * Unable to make a duplicate. It's definately invalid at this * point. */ return NULL; } /* * Use structured exception handling (Win32 SEH) to protect the close * of this duped handle which might throw EXCEPTION_INVALID_HANDLE. */ result = 0; #if defined(HAVE_NO_SEH) && !defined(_WIN64) /* * Don't have SEH available, do things the hard way. Note that this * needs to be one block of asm, to avoid stack imbalance; also, it is * illegal for one asm block to contain a jump to another. */ __asm__ __volatile__ ( /* * Pick up parameters before messing with the stack */ "movl %[dupedHandle], %%ebx" "\n\t" /* * Construct an TCLEXCEPTION_REGISTRATION to protect the call to * CloseHandle. */ "leal %[registration], %%edx" "\n\t" "movl %%fs:0, %%eax" "\n\t" "movl %%eax, 0x0(%%edx)" "\n\t" /* link */ "leal 1f, %%eax" "\n\t" "movl %%eax, 0x4(%%edx)" "\n\t" /* handler */ "movl %%ebp, 0x8(%%edx)" "\n\t" /* ebp */ "movl %%esp, 0xc(%%edx)" "\n\t" /* esp */ "movl $0, 0x10(%%edx)" "\n\t" /* status */ /* * Link the TCLEXCEPTION_REGISTRATION on the chain. */ "movl %%edx, %%fs:0" "\n\t" /* * Call CloseHandle(dupedHandle). */ "pushl %%ebx" "\n\t" "call _CloseHandle@4" "\n\t" /* * Come here on normal exit. Recover the TCLEXCEPTION_REGISTRATION * and put a TRUE status return into it. */ "movl %%fs:0, %%edx" "\n\t" "movl $1, %%eax" "\n\t" "movl %%eax, 0x10(%%edx)" "\n\t" "jmp 2f" "\n" /* * Come here on an exception. Recover the TCLEXCEPTION_REGISTRATION */ "1:" "\t" "movl %%fs:0, %%edx" "\n\t" "movl 0x8(%%edx), %%edx" "\n\t" /* * Come here however we exited. Restore context from the * TCLEXCEPTION_REGISTRATION in case the stack is unbalanced. */ "2:" "\t" "movl 0xc(%%edx), %%esp" "\n\t" "movl 0x8(%%edx), %%ebp" "\n\t" "movl 0x0(%%edx), %%eax" "\n\t" "movl %%eax, %%fs:0" "\n\t" : /* No outputs */ : [registration] "m" (registration), [dupedHandle] "m" (dupedHandle) : "%eax", "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory" ); result = registration.status; #else #ifndef HAVE_NO_SEH __try { #endif CloseHandle(dupedHandle); result = 1; #ifndef HAVE_NO_SEH } __except (EXCEPTION_EXECUTE_HANDLER) {} #endif #endif if (result == FALSE) { return NULL; } /* * Fall through, the handle is valid. * * Create the undefined channel, anyways, because we know the handle * is valid to something. */ channel = TclWinOpenFileChannel(handle, channelName, mode, 0); } return channel; } /* *---------------------------------------------------------------------- * * TclpGetDefaultStdChannel -- * * Constructs a channel for the specified standard OS handle. * * Results: * Returns the specified default standard channel, or NULL. * * Side effects: * May cause the creation of a standard channel and the underlying file. * *---------------------------------------------------------------------- */ Tcl_Channel TclpGetDefaultStdChannel( int type) /* One of TCL_STDIN, TCL_STDOUT, or * TCL_STDERR. */ { Tcl_Channel channel; HANDLE handle; int mode = -1; const char *bufMode = NULL; DWORD handleId = (DWORD) -1; /* Standard handle to retrieve. */ switch (type) { case TCL_STDIN: handleId = STD_INPUT_HANDLE; mode = TCL_READABLE; bufMode = "line"; break; case TCL_STDOUT: handleId = STD_OUTPUT_HANDLE; mode = TCL_WRITABLE; bufMode = "line"; break; case TCL_STDERR: handleId = STD_ERROR_HANDLE; mode = TCL_WRITABLE; bufMode = "none"; break; default: Tcl_Panic("TclGetDefaultStdChannel: Unexpected channel type"); break; } handle = GetStdHandle(handleId); /* * Note that we need to check for 0 because Windows may return 0 if this * is not a console mode application, even though this is not a valid * handle. */ if ((handle == INVALID_HANDLE_VALUE) || (handle == 0)) { return (Tcl_Channel) NULL; } channel = Tcl_MakeFileChannel(handle, mode); if (channel == NULL) { return (Tcl_Channel) NULL; } /* * Set up the normal channel options for stdio handles. */ if (Tcl_SetChannelOption(NULL,channel,"-translation","auto")!=TCL_OK || Tcl_SetChannelOption(NULL,channel,"-eofchar","\032 {}")!=TCL_OK || Tcl_SetChannelOption(NULL,channel,"-buffering",bufMode)!=TCL_OK) { Tcl_Close(NULL, channel); return (Tcl_Channel) NULL; } return channel; } /* *---------------------------------------------------------------------- * * TclWinOpenFileChannel -- * * Constructs a File channel for the specified standard OS handle. This * is a helper function to break up the construction of channels into * File, Console, or Serial. * * Results: * Returns the new channel, or NULL. * * Side effects: * May open the channel and may cause creation of a file on the file * system. * *---------------------------------------------------------------------- */ Tcl_Channel TclWinOpenFileChannel( HANDLE handle, /* Win32 HANDLE to swallow */ char *channelName, /* Buffer to receive channel name */ int permissions, /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, or TCL_EXCEPTION, indicating * which operations are valid on the file. */ int appendMode) /* OR'ed combination of bits indicating what * additional configuration of the channel is * present. */ { FileInfo *infoPtr; ThreadSpecificData *tsdPtr = FileInit(); /* * See if a channel with this handle already exists. */ for (infoPtr = tsdPtr->firstFilePtr; infoPtr != NULL; infoPtr = infoPtr->nextPtr) { if (infoPtr->handle == (HANDLE) handle) { return (permissions==infoPtr->validMask) ? infoPtr->channel : NULL; } } infoPtr = ckalloc(sizeof(FileInfo)); /* * TIP #218. Removed the code inserting the new structure into the global * list. This is now handled in the thread action callbacks, and only * there. */ infoPtr->nextPtr = NULL; infoPtr->validMask = permissions; infoPtr->watchMask = 0; infoPtr->flags = appendMode; infoPtr->handle = handle; infoPtr->dirty = 0; sprintf(channelName, "file%" TCL_Z_MODIFIER "x", (size_t) infoPtr); infoPtr->channel = Tcl_CreateChannel(&fileChannelType, channelName, infoPtr, permissions); /* * Files have default translation of AUTO and ^Z eof char, which means * that a ^Z will be accepted as EOF when reading. */ Tcl_SetChannelOption(NULL, infoPtr->channel, "-translation", "auto"); Tcl_SetChannelOption(NULL, infoPtr->channel, "-eofchar", "\032 {}"); return infoPtr->channel; } /* *---------------------------------------------------------------------- * * TclWinFlushDirtyChannels -- * * Flush all dirty channels to disk, so that requesting the size of any * file returns the correct value. * * Results: * None. * * Side effects: * Information is actually written to disk now, rather than later. Don't * call this too often, or there will be a performance hit (i.e. only * call when we need to ask for the size of a file). * *---------------------------------------------------------------------- */ void TclWinFlushDirtyChannels(void) { FileInfo *infoPtr; ThreadSpecificData *tsdPtr = FileInit(); /* * Flush all channels which are dirty, i.e. may have data pending in the * OS. */ for (infoPtr = tsdPtr->firstFilePtr; infoPtr != NULL; infoPtr = infoPtr->nextPtr) { if (infoPtr->dirty) { FlushFileBuffers(infoPtr->handle); infoPtr->dirty = 0; } } } /* *---------------------------------------------------------------------- * * FileThreadActionProc -- * * Insert or remove any thread local refs to this channel. * * Results: * None. * * Side effects: * Changes thread local list of valid channels. * *---------------------------------------------------------------------- */ static void FileThreadActionProc( ClientData instanceData, int action) { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); FileInfo *infoPtr = instanceData; if (action == TCL_CHANNEL_THREAD_INSERT) { infoPtr->nextPtr = tsdPtr->firstFilePtr; tsdPtr->firstFilePtr = infoPtr; } else { FileInfo **nextPtrPtr; int removed = 0; for (nextPtrPtr = &(tsdPtr->firstFilePtr); (*nextPtrPtr) != NULL; nextPtrPtr = &((*nextPtrPtr)->nextPtr)) { if ((*nextPtrPtr) == infoPtr) { (*nextPtrPtr) = infoPtr->nextPtr; removed = 1; break; } } /* * This could happen if the channel was created in one thread and then * moved to another without updating the thread local data in each * thread. */ if (!removed) { Tcl_Panic("file info ptr not on thread channel list"); } } } /* *---------------------------------------------------------------------- * * FileGetType -- * * Given a file handle, return its type * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ DWORD FileGetType( HANDLE handle) /* Opened file handle */ { DWORD type; type = GetFileType(handle); /* * If the file is a character device, we need to try to figure out whether * it is a serial port, a console, or something else. We test for the * console case first because this is more common. */ if ((type == FILE_TYPE_CHAR) || ((type == FILE_TYPE_UNKNOWN) && !GetLastError())) { DWORD consoleParams; if (GetConsoleMode(handle, &consoleParams)) { type = FILE_TYPE_CONSOLE; } else { DCB dcb; dcb.DCBlength = sizeof(DCB); if (GetCommState(handle, &dcb)) { type = FILE_TYPE_SERIAL; } } } return type; } /* *---------------------------------------------------------------------- * * NativeIsComPort -- * * Determines if a path refers to a Windows serial port. A simple and * efficient solution is to use a "name hint" to detect COM ports by * their filename instead of resorting to a syscall to detect serialness * after the fact. * * The following patterns cover common serial port names: * COM[1-9] * \\.\COM[0-9]+ * * Results: * 1 = serial port, 0 = not. * *---------------------------------------------------------------------- */ static int NativeIsComPort( const WCHAR *nativePath) /* Path of file to access, native encoding. */ { const WCHAR *p = (const WCHAR *) nativePath; int i, len = wcslen(p); /* * 1. Look for com[1-9]:? */ if ((len == 4) && (_wcsnicmp(p, L"com", 3) == 0)) { /* * The 4th character must be a digit 1..9 */ if ((p[3] < L'1') || (p[3] > L'9')) { return 0; } return 1; } /* * 2. Look for \\.\com[0-9]+ */ if ((len >= 8) && (_wcsnicmp(p, L"\\\\.\\com", 7) == 0)) { /* * Charaters 8..end must be a digits 0..9 */ for (i=7; i '9')) { return 0; } } return 1; } return 0; } /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */