/* * tclWinSerial.c -- * * This file implements the Windows-specific serial port functions, and * the "serial" channel driver. * * Copyright (c) 1999 by Scriptics Corp. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. * * Serial functionality implemented by Rolf.Schroedter@dlr.de */ #include "tclWinInt.h" /* * The following variable is used to tell whether this module has been * initialized. */ static int initialized = 0; /* * The serialMutex locks around access to the initialized variable, and it is * used to protect background threads from being terminated while they are * using APIs that hold locks. */ TCL_DECLARE_MUTEX(serialMutex) /* * Bit masks used in the flags field of the SerialInfo structure below. */ #define SERIAL_PENDING (1<<0) /* Message is pending in the queue. */ #define SERIAL_ASYNC (1<<1) /* Channel is non-blocking. */ /* * Bit masks used in the sharedFlags field of the SerialInfo structure below. */ #define SERIAL_EOF (1<<2) /* Serial has reached EOF. */ #define SERIAL_ERROR (1<<4) /* * Default time to block between checking status on the serial port. */ #define SERIAL_DEFAULT_BLOCKTIME 10 /* 10 msec */ /* * Define Win32 read/write error masks returned by ClearCommError() */ #define SERIAL_READ_ERRORS \ (CE_RXOVER | CE_OVERRUN | CE_RXPARITY | CE_FRAME | CE_BREAK) #define SERIAL_WRITE_ERRORS \ (CE_TXFULL | CE_PTO) /* * This structure describes per-instance data for a serial based channel. */ typedef struct SerialInfo { HANDLE handle; struct SerialInfo *nextPtr; /* Pointer to next registered serial. */ Tcl_Channel channel; /* Pointer to channel structure. */ int validMask; /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, or TCL_EXCEPTION: indicates * which operations are valid on the file. */ int watchMask; /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, or TCL_EXCEPTION: indicates * which events should be reported. */ int flags; /* State flags, see above for a list. */ int readable; /* Flag that the channel is readable. */ int writable; /* Flag that the channel is writable. */ int blockTime; /* Maximum blocktime in msec. */ unsigned int lastEventTime; /* Time in milliseconds since last readable * event. */ /* Next readable event only after blockTime */ DWORD error; /* pending error code returned by * ClearCommError() */ DWORD lastError; /* last error code, can be fetched with * fconfigure chan -lasterror */ DWORD sysBufRead; /* Win32 system buffer size for read ops, * default=4096 */ DWORD sysBufWrite; /* Win32 system buffer size for write ops, * default=4096 */ Tcl_ThreadId threadId; /* Thread to which events should be reported. * This value is used by the reader/writer * threads. */ OVERLAPPED osRead; /* OVERLAPPED structure for read operations. */ OVERLAPPED osWrite; /* OVERLAPPED structure for write operations */ TclPipeThreadInfo *writeTI; /* Thread info structure of writer worker. */ HANDLE writeThread; /* Handle to writer thread. */ CRITICAL_SECTION csWrite; /* Writer thread synchronisation. */ HANDLE evWritable; /* Manual-reset event to signal when the * writer thread has finished waiting for the * current buffer to be written. */ DWORD writeError; /* An error caused by the last background * write. Set to 0 if no error has been * detected. This word is shared with the * writer thread so access must be * synchronized with the evWritable object. */ char *writeBuf; /* Current background output buffer. Access is * synchronized with the evWritable object. */ int writeBufLen; /* Size of write buffer. Access is * synchronized with the evWritable object. */ int toWrite; /* Current amount to be written. Access is * synchronized with the evWritable object. */ int writeQueue; /* Number of bytes pending in output queue. * Offset to DCB.cbInQue. Used to query * [fconfigure -queue] */ } SerialInfo; typedef struct { /* * The following pointer refers to the head of the list of serials that * are being watched for file events. */ SerialInfo *firstSerialPtr; } ThreadSpecificData; static Tcl_ThreadDataKey dataKey; /* * The following structure is what is added to the Tcl event queue when serial * events are generated. */ typedef struct { Tcl_Event header; /* Information that is standard for all * events. */ SerialInfo *infoPtr; /* Pointer to serial info structure. Note that * we still have to verify that the serial * exists before dereferencing this * pointer. */ } SerialEvent; /* * We don't use timeouts. */ static COMMTIMEOUTS no_timeout = { 0, /* ReadIntervalTimeout */ 0, /* ReadTotalTimeoutMultiplier */ 0, /* ReadTotalTimeoutConstant */ 0, /* WriteTotalTimeoutMultiplier */ 0, /* WriteTotalTimeoutConstant */ }; /* * Declarations for functions used only in this file. */ static int SerialBlockProc(ClientData instanceData, int mode); static void SerialCheckProc(ClientData clientData, int flags); static int SerialCloseProc(ClientData instanceData, Tcl_Interp *interp); static int SerialEventProc(Tcl_Event *evPtr, int flags); static void SerialExitHandler(ClientData clientData); static int SerialGetHandleProc(ClientData instanceData, int direction, ClientData *handlePtr); static ThreadSpecificData *SerialInit(void); static int SerialInputProc(ClientData instanceData, char *buf, int toRead, int *errorCode); static int SerialOutputProc(ClientData instanceData, const char *buf, int toWrite, int *errorCode); static void SerialSetupProc(ClientData clientData, int flags); static void SerialWatchProc(ClientData instanceData, int mask); static void ProcExitHandler(ClientData clientData); static int SerialGetOptionProc(ClientData instanceData, Tcl_Interp *interp, const char *optionName, Tcl_DString *dsPtr); static int SerialSetOptionProc(ClientData instanceData, Tcl_Interp *interp, const char *optionName, const char *value); static DWORD WINAPI SerialWriterThread(LPVOID arg); static void SerialThreadActionProc(ClientData instanceData, int action); static int SerialBlockingRead(SerialInfo *infoPtr, LPVOID buf, DWORD bufSize, LPDWORD lpRead, LPOVERLAPPED osPtr); static int SerialBlockingWrite(SerialInfo *infoPtr, LPVOID buf, DWORD bufSize, LPDWORD lpWritten, LPOVERLAPPED osPtr); /* * This structure describes the channel type structure for command serial * based IO. */ static const Tcl_ChannelType serialChannelType = { "serial", /* Type name. */ TCL_CHANNEL_VERSION_5, /* v5 channel */ SerialCloseProc, /* Close proc. */ SerialInputProc, /* Input proc. */ SerialOutputProc, /* Output proc. */ NULL, /* Seek proc. */ SerialSetOptionProc, /* Set option proc. */ SerialGetOptionProc, /* Get option proc. */ SerialWatchProc, /* Set up notifier to watch the channel. */ SerialGetHandleProc, /* Get an OS handle from channel. */ NULL, /* close2proc. */ SerialBlockProc, /* Set blocking or non-blocking mode.*/ NULL, /* flush proc. */ NULL, /* handler proc. */ NULL, /* wide seek proc */ SerialThreadActionProc, /* thread action proc */ NULL /* truncate */ }; /* *---------------------------------------------------------------------- * * SerialInit -- * * This function initializes the static variables for this file. * * Results: * None. * * Side effects: * Creates a new event source. * *---------------------------------------------------------------------- */ static ThreadSpecificData * SerialInit(void) { ThreadSpecificData *tsdPtr; /* * Check the initialized flag first, then check it again in the mutex. * This is a speed enhancement. */ if (!initialized) { Tcl_MutexLock(&serialMutex); if (!initialized) { initialized = 1; Tcl_CreateExitHandler(ProcExitHandler, NULL); } Tcl_MutexUnlock(&serialMutex); } tsdPtr = (ThreadSpecificData *) TclThreadDataKeyGet(&dataKey); if (tsdPtr == NULL) { tsdPtr = TCL_TSD_INIT(&dataKey); tsdPtr->firstSerialPtr = NULL; Tcl_CreateEventSource(SerialSetupProc, SerialCheckProc, NULL); Tcl_CreateThreadExitHandler(SerialExitHandler, NULL); } return tsdPtr; } /* *---------------------------------------------------------------------- * * SerialExitHandler -- * * This function is called to cleanup the serial module before Tcl is * unloaded. * * Results: * None. * * Side effects: * Removes the serial event source. * *---------------------------------------------------------------------- */ static void SerialExitHandler( ClientData clientData) /* Old window proc */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); SerialInfo *infoPtr; /* * Clear all eventually pending output. Otherwise Tcl's exit could totally * block, because it performs a blocking flush on all open channels. Note * that serial write operations may be blocked due to handshake. */ for (infoPtr = tsdPtr->firstSerialPtr; infoPtr != NULL; infoPtr = infoPtr->nextPtr) { PurgeComm(infoPtr->handle, PURGE_TXABORT | PURGE_RXABORT | PURGE_TXCLEAR | PURGE_RXCLEAR); } Tcl_DeleteEventSource(SerialSetupProc, SerialCheckProc, NULL); } /* *---------------------------------------------------------------------- * * ProcExitHandler -- * * This function is called to cleanup the process list before Tcl is * unloaded. * * Results: * None. * * Side effects: * Resets the process list. * *---------------------------------------------------------------------- */ static void ProcExitHandler( ClientData clientData) /* Old window proc */ { Tcl_MutexLock(&serialMutex); initialized = 0; Tcl_MutexUnlock(&serialMutex); } /* *---------------------------------------------------------------------- * * SerialBlockTime -- * * Wrapper to set Tcl's block time in msec * * Results: * None. * * Side effects: * Updates the maximum blocking time. * *---------------------------------------------------------------------- */ static void SerialBlockTime( int msec) /* milli-seconds */ { Tcl_Time blockTime; blockTime.sec = msec / 1000; blockTime.usec = (msec % 1000) * 1000; Tcl_SetMaxBlockTime(&blockTime); } /* *---------------------------------------------------------------------- * * SerialGetMilliseconds -- * * Get current time in milliseconds,ignoring integer overruns. * * Results: * The current time. * * Side effects: * None. * *---------------------------------------------------------------------- */ static unsigned int SerialGetMilliseconds(void) { Tcl_Time time; Tcl_GetTime(&time); return (time.sec * 1000 + time.usec / 1000); } /* *---------------------------------------------------------------------- * * SerialSetupProc -- * * This procedure is invoked before Tcl_DoOneEvent blocks waiting for an * event. * * Results: * None. * * Side effects: * Adjusts the block time if needed. * *---------------------------------------------------------------------- */ void SerialSetupProc( ClientData data, /* Not used. */ int flags) /* Event flags as passed to Tcl_DoOneEvent. */ { SerialInfo *infoPtr; int block = 1; int msec = INT_MAX; /* min. found block time */ ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if (!(flags & TCL_FILE_EVENTS)) { return; } /* * Look to see if any events handlers installed. If they are, do not * block. */ for (infoPtr=tsdPtr->firstSerialPtr ; infoPtr!=NULL ; infoPtr=infoPtr->nextPtr) { if (infoPtr->watchMask & TCL_WRITABLE) { if (WaitForSingleObject(infoPtr->evWritable, 0) != WAIT_TIMEOUT) { block = 0; msec = min(msec, infoPtr->blockTime); } } if (infoPtr->watchMask & TCL_READABLE) { block = 0; msec = min(msec, infoPtr->blockTime); } } if (!block) { SerialBlockTime(msec); } } /* *---------------------------------------------------------------------- * * SerialCheckProc -- * * This procedure is called by Tcl_DoOneEvent to check the serial event * source for events. * * Results: * None. * * Side effects: * May queue an event. * *---------------------------------------------------------------------- */ static void SerialCheckProc( ClientData data, /* Not used. */ int flags) /* Event flags as passed to Tcl_DoOneEvent. */ { SerialInfo *infoPtr; SerialEvent *evPtr; int needEvent; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); COMSTAT cStat; unsigned int time; if (!(flags & TCL_FILE_EVENTS)) { return; } /* * Queue events for any ready serials that don't already have events * queued. */ for (infoPtr=tsdPtr->firstSerialPtr ; infoPtr!=NULL ; infoPtr=infoPtr->nextPtr) { if (infoPtr->flags & SERIAL_PENDING) { continue; } needEvent = 0; /* * If WRITABLE watch mask is set look for infoPtr->evWritable object. */ if (infoPtr->watchMask & TCL_WRITABLE && WaitForSingleObject(infoPtr->evWritable, 0) != WAIT_TIMEOUT) { infoPtr->writable = 1; needEvent = 1; } /* * If READABLE watch mask is set call ClearCommError to poll cbInQue. * Window errors are ignored here. */ if (infoPtr->watchMask & TCL_READABLE) { if (ClearCommError(infoPtr->handle, &infoPtr->error, &cStat)) { /* * Look for characters already pending in windows queue. If * they are, poll. */ if (infoPtr->watchMask & TCL_READABLE) { /* * Force fileevent after serial read error. */ if ((cStat.cbInQue > 0) || (infoPtr->error & SERIAL_READ_ERRORS)) { infoPtr->readable = 1; time = SerialGetMilliseconds(); if ((unsigned int) (time - infoPtr->lastEventTime) >= (unsigned int) infoPtr->blockTime) { needEvent = 1; infoPtr->lastEventTime = time; } } } } } /* * Queue an event if the serial is signaled for reading or writing. */ if (needEvent) { infoPtr->flags |= SERIAL_PENDING; evPtr = ckalloc(sizeof(SerialEvent)); evPtr->header.proc = SerialEventProc; evPtr->infoPtr = infoPtr; Tcl_QueueEvent((Tcl_Event *) evPtr, TCL_QUEUE_TAIL); } } } /* *---------------------------------------------------------------------- * * SerialBlockProc -- * * Set blocking or non-blocking mode on channel. * * Results: * 0 if successful, errno when failed. * * Side effects: * Sets the device into blocking or non-blocking mode. * *---------------------------------------------------------------------- */ static int SerialBlockProc( ClientData instanceData, /* Instance data for channel. */ int mode) /* TCL_MODE_BLOCKING or * TCL_MODE_NONBLOCKING. */ { int errorCode = 0; SerialInfo *infoPtr = (SerialInfo *) instanceData; /* * Only serial READ can be switched between blocking & nonblocking using * COMMTIMEOUTS. Serial write emulates blocking & nonblocking by the * SerialWriterThread. */ if (mode == TCL_MODE_NONBLOCKING) { infoPtr->flags |= SERIAL_ASYNC; } else { infoPtr->flags &= ~(SERIAL_ASYNC); } return errorCode; } /* *---------------------------------------------------------------------- * * SerialCloseProc -- * * Closes a serial based IO channel. * * Results: * 0 on success, errno otherwise. * * Side effects: * Closes the physical channel. * *---------------------------------------------------------------------- */ static int SerialCloseProc( ClientData instanceData, /* Pointer to SerialInfo structure. */ Tcl_Interp *interp) /* For error reporting. */ { SerialInfo *serialPtr = (SerialInfo *) instanceData; int errorCode, result = 0; SerialInfo *infoPtr, **nextPtrPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); errorCode = 0; if (serialPtr->validMask & TCL_READABLE) { PurgeComm(serialPtr->handle, PURGE_RXABORT | PURGE_RXCLEAR); CloseHandle(serialPtr->osRead.hEvent); } serialPtr->validMask &= ~TCL_READABLE; if (serialPtr->writeThread) { TclPipeThreadStop(&serialPtr->writeTI, serialPtr->writeThread); CloseHandle(serialPtr->osWrite.hEvent); CloseHandle(serialPtr->evWritable); CloseHandle(serialPtr->writeThread); serialPtr->writeThread = NULL; PurgeComm(serialPtr->handle, PURGE_TXABORT | PURGE_TXCLEAR); } serialPtr->validMask &= ~TCL_WRITABLE; DeleteCriticalSection(&serialPtr->csWrite); /* * Don't close the Win32 handle if the handle is a standard channel during * the thread exit process. Otherwise, one thread may kill the stdio of * another. */ if (!TclInThreadExit() || ((GetStdHandle(STD_INPUT_HANDLE) != serialPtr->handle) && (GetStdHandle(STD_OUTPUT_HANDLE) != serialPtr->handle) && (GetStdHandle(STD_ERROR_HANDLE) != serialPtr->handle))) { if (CloseHandle(serialPtr->handle) == FALSE) { TclWinConvertError(GetLastError()); errorCode = errno; } } serialPtr->watchMask &= serialPtr->validMask; /* * Remove the file from the list of watched files. */ for (nextPtrPtr=&(tsdPtr->firstSerialPtr), infoPtr=*nextPtrPtr; infoPtr!=NULL; nextPtrPtr=&infoPtr->nextPtr, infoPtr=*nextPtrPtr) { if (infoPtr == (SerialInfo *)serialPtr) { *nextPtrPtr = infoPtr->nextPtr; break; } } /* * Wrap the error file into a channel and give it to the cleanup routine. */ if (serialPtr->writeBuf != NULL) { ckfree(serialPtr->writeBuf); serialPtr->writeBuf = NULL; } ckfree(serialPtr); if (errorCode == 0) { return result; } return errorCode; } /* *---------------------------------------------------------------------- * * SerialBlockingRead -- * * Perform a blocking read into the buffer given. Returns count of how * many bytes were actually read, and an error indication. * * Results: * A count of how many bytes were read is returned and an error * indication is returned. * * Side effects: * Reads input from the actual channel. * *---------------------------------------------------------------------- */ static int SerialBlockingRead( SerialInfo *infoPtr, /* Serial info structure */ LPVOID buf, /* The input buffer pointer */ DWORD bufSize, /* The number of bytes to read */ LPDWORD lpRead, /* Returns number of bytes read */ LPOVERLAPPED osPtr) /* OVERLAPPED structure */ { /* * Perform overlapped blocking read. * 1. Reset the overlapped event * 2. Start overlapped read operation * 3. Wait for completion */ /* * Set Offset to ZERO, otherwise NT4.0 may report an error. */ osPtr->Offset = osPtr->OffsetHigh = 0; ResetEvent(osPtr->hEvent); if (!ReadFile(infoPtr->handle, buf, bufSize, lpRead, osPtr)) { if (GetLastError() != ERROR_IO_PENDING) { /* * ReadFile failed, but it isn't delayed. Report error. */ return FALSE; } else { /* * Read is pending, wait for completion, timeout? */ if (!GetOverlappedResult(infoPtr->handle, osPtr, lpRead, TRUE)) { return FALSE; } } } else { /* * ReadFile completed immediately. */ } return TRUE; } /* *---------------------------------------------------------------------- * * SerialBlockingWrite -- * * Perform a blocking write from the buffer given. Returns count of how * many bytes were actually written, and an error indication. * * Results: * A count of how many bytes were written is returned and an error * indication is returned. * * Side effects: * Writes output to the actual channel. * *---------------------------------------------------------------------- */ static int SerialBlockingWrite( SerialInfo *infoPtr, /* Serial info structure */ LPVOID buf, /* The output buffer pointer */ DWORD bufSize, /* The number of bytes to write */ LPDWORD lpWritten, /* Returns number of bytes written */ LPOVERLAPPED osPtr) /* OVERLAPPED structure */ { int result; /* * Perform overlapped blocking write. * 1. Reset the overlapped event * 2. Remove these bytes from the output queue counter * 3. Start overlapped write operation * 3. Remove these bytes from the output queue counter * 4. Wait for completion * 5. Adjust the output queue counter */ ResetEvent(osPtr->hEvent); EnterCriticalSection(&infoPtr->csWrite); infoPtr->writeQueue -= bufSize; /* * Set Offset to ZERO, otherwise NT4.0 may report an error */ osPtr->Offset = osPtr->OffsetHigh = 0; result = WriteFile(infoPtr->handle, buf, bufSize, lpWritten, osPtr); LeaveCriticalSection(&infoPtr->csWrite); if (result == FALSE) { int err = GetLastError(); switch (err) { case ERROR_IO_PENDING: /* * Write is pending, wait for completion. */ if (!GetOverlappedResult(infoPtr->handle, osPtr, lpWritten, TRUE)) { return FALSE; } break; case ERROR_COUNTER_TIMEOUT: /* * Write timeout handled in SerialOutputProc. */ break; default: /* * WriteFile failed, but it isn't delayed. Report error. */ return FALSE; } } else { /* * WriteFile completed immediately. */ } EnterCriticalSection(&infoPtr->csWrite); infoPtr->writeQueue += (*lpWritten - bufSize); LeaveCriticalSection(&infoPtr->csWrite); return TRUE; } /* *---------------------------------------------------------------------- * * SerialInputProc -- * * Reads input from the IO channel into the buffer given. Returns count * of how many bytes were actually read, and an error indication. * * Results: * A count of how many bytes were read is returned and an error * indication is returned in an output argument. * * Side effects: * Reads input from the actual channel. * *---------------------------------------------------------------------- */ static int SerialInputProc( ClientData instanceData, /* Serial state. */ char *buf, /* Where to store data read. */ int bufSize, /* How much space is available in the * buffer? */ int *errorCode) /* Where to store error code. */ { SerialInfo *infoPtr = (SerialInfo *) instanceData; DWORD bytesRead = 0; COMSTAT cStat; *errorCode = 0; /* * Check if there is a CommError pending from SerialCheckProc */ if (infoPtr->error & SERIAL_READ_ERRORS) { goto commError; } /* * Look for characters already pending in windows queue. This is the * mainly restored good old code from Tcl8.0 */ if (ClearCommError(infoPtr->handle, &infoPtr->error, &cStat)) { /* * Check for errors here, but not in the evSetup/Check procedures. */ if (infoPtr->error & SERIAL_READ_ERRORS) { goto commError; } if (infoPtr->flags & SERIAL_ASYNC) { /* * NON_BLOCKING mode: Avoid blocking by reading more bytes than * available in input buffer. */ if (cStat.cbInQue > 0) { if ((DWORD) bufSize > cStat.cbInQue) { bufSize = cStat.cbInQue; } } else { errno = *errorCode = EWOULDBLOCK; return -1; } } else { /* * BLOCKING mode: Tcl trys to read a full buffer of 4 kBytes here. */ if (cStat.cbInQue > 0) { if ((DWORD) bufSize > cStat.cbInQue) { bufSize = cStat.cbInQue; } } else { bufSize = 1; } } } if (bufSize == 0) { return bytesRead = 0; } /* * Perform blocking read. Doesn't block in non-blocking mode, because we * checked the number of available bytes. */ if (SerialBlockingRead(infoPtr, (LPVOID) buf, (DWORD) bufSize, &bytesRead, &infoPtr->osRead) == FALSE) { TclWinConvertError(GetLastError()); *errorCode = errno; return -1; } return bytesRead; commError: infoPtr->lastError = infoPtr->error; /* save last error code */ infoPtr->error = 0; /* reset error code */ *errorCode = EIO; /* to return read-error only once */ return -1; } /* *---------------------------------------------------------------------- * * SerialOutputProc -- * * Writes the given output on the IO channel. Returns count of how many * characters were actually written, and an error indication. * * Results: * A count of how many characters were written is returned and an error * indication is returned in an output argument. * * Side effects: * Writes output on the actual channel. * *---------------------------------------------------------------------- */ static int SerialOutputProc( ClientData instanceData, /* Serial state. */ const char *buf, /* The data buffer. */ int toWrite, /* How many bytes to write? */ int *errorCode) /* Where to store error code. */ { SerialInfo *infoPtr = (SerialInfo *) instanceData; DWORD bytesWritten, timeout; *errorCode = 0; /* * At EXIT Tcl trys to flush all open channels in blocking mode. We avoid * blocking output after ExitProc or CloseHandler(chan) has been called by * checking the corrresponding variables. */ if (!initialized || TclInExit()) { return toWrite; } /* * Check if there is a CommError pending from SerialCheckProc */ if (infoPtr->error & SERIAL_WRITE_ERRORS) { infoPtr->lastError = infoPtr->error; /* save last error code */ infoPtr->error = 0; /* reset error code */ errno = EIO; goto error; } timeout = (infoPtr->flags & SERIAL_ASYNC) ? 0 : INFINITE; if (WaitForSingleObject(infoPtr->evWritable, timeout) == WAIT_TIMEOUT) { /* * The writer thread is blocked waiting for a write to complete and * the channel is in non-blocking mode. */ errno = EWOULDBLOCK; goto error1; } /* * Check for a background error on the last write. */ if (infoPtr->writeError) { TclWinConvertError(infoPtr->writeError); infoPtr->writeError = 0; goto error1; } /* * Remember the number of bytes in output queue */ EnterCriticalSection(&infoPtr->csWrite); infoPtr->writeQueue += toWrite; LeaveCriticalSection(&infoPtr->csWrite); if (infoPtr->flags & SERIAL_ASYNC) { /* * The serial is non-blocking, so copy the data into the output buffer * and restart the writer thread. */ if (toWrite > infoPtr->writeBufLen) { /* * Reallocate the buffer to be large enough to hold the data. */ if (infoPtr->writeBuf) { ckfree(infoPtr->writeBuf); } infoPtr->writeBufLen = toWrite; infoPtr->writeBuf = ckalloc(toWrite); } memcpy(infoPtr->writeBuf, buf, toWrite); infoPtr->toWrite = toWrite; ResetEvent(infoPtr->evWritable); TclPipeThreadSignal(&infoPtr->writeTI); bytesWritten = (DWORD) toWrite; } else { /* * In the blocking case, just try to write the buffer directly. This * avoids an unnecessary copy. */ if (!SerialBlockingWrite(infoPtr, (LPVOID) buf, (DWORD) toWrite, &bytesWritten, &infoPtr->osWrite)) { goto writeError; } if (bytesWritten != (DWORD) toWrite) { /* * Write timeout. */ infoPtr->lastError |= CE_PTO; errno = EIO; goto error; } } return (int) bytesWritten; writeError: TclWinConvertError(GetLastError()); error: /* * Reset the output queue counter on error during blocking output */ /* * EnterCriticalSection(&infoPtr->csWrite); * infoPtr->writeQueue = 0; * LeaveCriticalSection(&infoPtr->csWrite); */ error1: *errorCode = errno; return -1; } /* *---------------------------------------------------------------------- * * SerialEventProc -- * * This function is invoked by Tcl_ServiceEvent when a file event reaches * the front of the event queue. This procedure invokes Tcl_NotifyChannel * on the serial. * * Results: * Returns 1 if the event was handled, meaning it should be removed from * the queue. Returns 0 if the event was not handled, meaning it should * stay on the queue. The only time the event isn't handled is if the * TCL_FILE_EVENTS flag bit isn't set. * * Side effects: * Whatever the notifier callback does. * *---------------------------------------------------------------------- */ static int SerialEventProc( Tcl_Event *evPtr, /* Event to service. */ int flags) /* Flags that indicate what events to handle, * such as TCL_FILE_EVENTS. */ { SerialEvent *serialEvPtr = (SerialEvent *)evPtr; SerialInfo *infoPtr; int mask; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if (!(flags & TCL_FILE_EVENTS)) { return 0; } /* * Search through the list of watched serials for the one whose handle * matches the event. We do this rather than simply dereferencing the * handle in the event so that serials can be deleted while the event is * in the queue. */ for (infoPtr = tsdPtr->firstSerialPtr; infoPtr != NULL; infoPtr = infoPtr->nextPtr) { if (serialEvPtr->infoPtr == infoPtr) { infoPtr->flags &= ~(SERIAL_PENDING); break; } } /* * Remove stale events. */ if (!infoPtr) { return 1; } /* * Check to see if the serial is readable. Note that we can't tell if a * serial is writable, so we always report it as being writable unless we * have detected EOF. */ mask = 0; if (infoPtr->watchMask & TCL_WRITABLE) { if (infoPtr->writable) { mask |= TCL_WRITABLE; infoPtr->writable = 0; } } if (infoPtr->watchMask & TCL_READABLE) { if (infoPtr->readable) { mask |= TCL_READABLE; infoPtr->readable = 0; } } /* * Inform the channel of the events. */ Tcl_NotifyChannel(infoPtr->channel, infoPtr->watchMask & mask); return 1; } /* *---------------------------------------------------------------------- * * SerialWatchProc -- * * Called by the notifier to set up to watch for events on this channel. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ static void SerialWatchProc( ClientData instanceData, /* Serial state. */ int mask) /* What events to watch for, OR-ed combination * of TCL_READABLE, TCL_WRITABLE and * TCL_EXCEPTION. */ { SerialInfo **nextPtrPtr, *ptr; SerialInfo *infoPtr = (SerialInfo *) instanceData; int oldMask = infoPtr->watchMask; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); /* * Since the file is always ready for events, we set the block time so we * will poll. */ infoPtr->watchMask = mask & infoPtr->validMask; if (infoPtr->watchMask) { if (!oldMask) { infoPtr->nextPtr = tsdPtr->firstSerialPtr; tsdPtr->firstSerialPtr = infoPtr; } SerialBlockTime(infoPtr->blockTime); } else if (oldMask) { /* * Remove the serial port from the list of watched serial ports. */ for (nextPtrPtr=&(tsdPtr->firstSerialPtr), ptr=*nextPtrPtr; ptr!=NULL; nextPtrPtr=&ptr->nextPtr, ptr=*nextPtrPtr) { if (infoPtr == ptr) { *nextPtrPtr = ptr->nextPtr; break; } } } } /* *---------------------------------------------------------------------- * * SerialGetHandleProc -- * * Called from Tcl_GetChannelHandle to retrieve OS handles from inside a * command serial port based channel. * * Results: * Returns TCL_OK with the fd in handlePtr, or TCL_ERROR if there is no * handle for the specified direction. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int SerialGetHandleProc( ClientData instanceData, /* The serial state. */ int direction, /* TCL_READABLE or TCL_WRITABLE */ ClientData *handlePtr) /* Where to store the handle. */ { SerialInfo *infoPtr = (SerialInfo *) instanceData; *handlePtr = (ClientData) infoPtr->handle; return TCL_OK; } /* *---------------------------------------------------------------------- * * SerialWriterThread -- * * This function runs in a separate thread and writes data onto a serial. * * Results: * Always returns 0. * * Side effects: * Signals the main thread when an output operation is completed. May * cause the main thread to wake up by posting a message. * *---------------------------------------------------------------------- */ static DWORD WINAPI SerialWriterThread( LPVOID arg) { TclPipeThreadInfo *pipeTI = (TclPipeThreadInfo *)arg; SerialInfo *infoPtr = NULL; /* access info only after success init/wait */ DWORD bytesWritten, toWrite; char *buf; OVERLAPPED myWrite; /* Have an own OVERLAPPED in this thread. */ for (;;) { /* * Wait for the main thread to signal before attempting to write. */ if (!TclPipeThreadWaitForSignal(&pipeTI)) { /* exit */ break; } infoPtr = (SerialInfo *)pipeTI->clientData; buf = infoPtr->writeBuf; toWrite = infoPtr->toWrite; myWrite.hEvent = CreateEvent(NULL, TRUE, FALSE, NULL); /* * Loop until all of the bytes are written or an error occurs. */ while (toWrite > 0) { /* * Check for pending writeError. Ignore all write operations until * the user has been notified. */ if (infoPtr->writeError) { break; } if (SerialBlockingWrite(infoPtr, (LPVOID) buf, (DWORD) toWrite, &bytesWritten, &myWrite) == FALSE) { infoPtr->writeError = GetLastError(); break; } if (bytesWritten != toWrite) { /* * Write timeout. */ infoPtr->writeError = ERROR_WRITE_FAULT; break; } toWrite -= bytesWritten; buf += bytesWritten; } CloseHandle(myWrite.hEvent); /* * Signal the main thread by signalling the evWritable event and then * waking up the notifier thread. */ SetEvent(infoPtr->evWritable); /* * Alert the foreground thread. Note that we need to treat this like a * critical section so the foreground thread does not terminate this * thread while we are holding a mutex in the notifier code. */ Tcl_MutexLock(&serialMutex); if (infoPtr->threadId != NULL) { /* * TIP #218: When in flight ignore the event, no one will receive * it anyway. */ Tcl_ThreadAlert(infoPtr->threadId); } Tcl_MutexUnlock(&serialMutex); } /* Worker exit, so inform the main thread or free TI-structure (if owned) */ TclPipeThreadExit(&pipeTI); return 0; } /* *---------------------------------------------------------------------- * * TclWinSerialOpen -- * * Opens or Reopens the serial port with the OVERLAPPED FLAG set * * Results: * Returns the new handle, or INVALID_HANDLE_VALUE. * If an existing channel is specified it is closed and reopened. * * Side effects: * May close/reopen the original handle * *---------------------------------------------------------------------- */ HANDLE TclWinSerialOpen( HANDLE handle, const TCHAR *name, DWORD access) { SerialInit(); /* * If an open channel is specified, close it */ if ( handle != INVALID_HANDLE_VALUE && CloseHandle(handle) == FALSE) { return INVALID_HANDLE_VALUE; } /* * Multithreaded I/O needs the overlapped flag set otherwise * ClearCommError blocks under Windows NT/2000 until serial output is * finished */ handle = CreateFile(name, access, 0, 0, OPEN_EXISTING, FILE_FLAG_OVERLAPPED, 0); return handle; } /* *---------------------------------------------------------------------- * * TclWinOpenSerialChannel -- * * Constructs a Serial port channel for the specified standard OS handle. * This is a helper function to break up the construction of channels * into File, Console, or Serial. * * Results: * Returns the new channel, or NULL. * * Side effects: * May open the channel * *---------------------------------------------------------------------- */ Tcl_Channel TclWinOpenSerialChannel( HANDLE handle, char *channelName, int permissions) { SerialInfo *infoPtr; SerialInit(); infoPtr = ckalloc(sizeof(SerialInfo)); memset(infoPtr, 0, sizeof(SerialInfo)); infoPtr->validMask = permissions; infoPtr->handle = handle; infoPtr->channel = (Tcl_Channel) NULL; infoPtr->readable = 0; infoPtr->writable = 1; infoPtr->toWrite = infoPtr->writeQueue = 0; infoPtr->blockTime = SERIAL_DEFAULT_BLOCKTIME; infoPtr->lastEventTime = 0; infoPtr->lastError = infoPtr->error = 0; infoPtr->threadId = Tcl_GetCurrentThread(); infoPtr->sysBufRead = 4096; infoPtr->sysBufWrite = 4096; /* * Use the pointer to keep the channel names unique, in case the handles * are shared between multiple channels (stdin/stdout). */ sprintf(channelName, "file%" TCL_Z_MODIFIER "x", (size_t) infoPtr); infoPtr->channel = Tcl_CreateChannel(&serialChannelType, channelName, infoPtr, permissions); SetupComm(handle, infoPtr->sysBufRead, infoPtr->sysBufWrite); PurgeComm(handle, PURGE_TXABORT | PURGE_RXABORT | PURGE_TXCLEAR | PURGE_RXCLEAR); /* * Default is blocking. */ SetCommTimeouts(handle, &no_timeout); InitializeCriticalSection(&infoPtr->csWrite); if (permissions & TCL_READABLE) { infoPtr->osRead.hEvent = CreateEvent(NULL, TRUE, FALSE, NULL); } if (permissions & TCL_WRITABLE) { /* * Initially the channel is writable and the writeThread is idle. */ infoPtr->osWrite.hEvent = CreateEvent(NULL, TRUE, FALSE, NULL); infoPtr->evWritable = CreateEvent(NULL, TRUE, TRUE, NULL); infoPtr->writeThread = CreateThread(NULL, 256, SerialWriterThread, TclPipeThreadCreateTI(&infoPtr->writeTI, infoPtr, infoPtr->evWritable), 0, NULL); } /* * Files have default translation of AUTO and ^Z eof char, which means * that a ^Z will be accepted as EOF when reading. */ Tcl_SetChannelOption(NULL, infoPtr->channel, "-translation", "auto"); Tcl_SetChannelOption(NULL, infoPtr->channel, "-eofchar", "\032 {}"); return infoPtr->channel; } /* *---------------------------------------------------------------------- * * SerialErrorStr -- * * Converts a Win32 serial error code to a list of readable errors. * * Results: * None. * * Side effects: * Generates readable errors in the supplied DString. * *---------------------------------------------------------------------- */ static void SerialErrorStr( DWORD error, /* Win32 serial error code. */ Tcl_DString *dsPtr) /* Where to store string. */ { if (error & CE_RXOVER) { Tcl_DStringAppendElement(dsPtr, "RXOVER"); } if (error & CE_OVERRUN) { Tcl_DStringAppendElement(dsPtr, "OVERRUN"); } if (error & CE_RXPARITY) { Tcl_DStringAppendElement(dsPtr, "RXPARITY"); } if (error & CE_FRAME) { Tcl_DStringAppendElement(dsPtr, "FRAME"); } if (error & CE_BREAK) { Tcl_DStringAppendElement(dsPtr, "BREAK"); } if (error & CE_TXFULL) { Tcl_DStringAppendElement(dsPtr, "TXFULL"); } if (error & CE_PTO) { /* PTO used to signal WRITE-TIMEOUT */ Tcl_DStringAppendElement(dsPtr, "TIMEOUT"); } if (error & ~((DWORD) (SERIAL_READ_ERRORS | SERIAL_WRITE_ERRORS))) { char buf[TCL_INTEGER_SPACE + 1]; wsprintfA(buf, "%d", error); Tcl_DStringAppendElement(dsPtr, buf); } } /* *---------------------------------------------------------------------- * * SerialModemStatusStr -- * * Converts a Win32 modem status list of readable flags * * Result: * None. * * Side effects: * Appends modem status flag strings to the given DString. * *---------------------------------------------------------------------- */ static void SerialModemStatusStr( DWORD status, /* Win32 modem status. */ Tcl_DString *dsPtr) /* Where to store string. */ { Tcl_DStringAppendElement(dsPtr, "CTS"); Tcl_DStringAppendElement(dsPtr, (status & MS_CTS_ON) ? "1" : "0"); Tcl_DStringAppendElement(dsPtr, "DSR"); Tcl_DStringAppendElement(dsPtr, (status & MS_DSR_ON) ? "1" : "0"); Tcl_DStringAppendElement(dsPtr, "RING"); Tcl_DStringAppendElement(dsPtr, (status & MS_RING_ON) ? "1" : "0"); Tcl_DStringAppendElement(dsPtr, "DCD"); Tcl_DStringAppendElement(dsPtr, (status & MS_RLSD_ON) ? "1" : "0"); } /* *---------------------------------------------------------------------- * * SerialSetOptionProc -- * * Sets an option on a channel. * * Results: * A standard Tcl result. Also sets the interp's result on error if * interp is not NULL. * * Side effects: * May modify an option on a device. * *---------------------------------------------------------------------- */ static int SerialSetOptionProc( ClientData instanceData, /* File state. */ Tcl_Interp *interp, /* For error reporting - can be NULL. */ const char *optionName, /* Which option to set? */ const char *value) /* New value for option. */ { SerialInfo *infoPtr; DCB dcb; BOOL result, flag; size_t len, vlen; Tcl_DString ds; const TCHAR *native; int argc; const char **argv; infoPtr = (SerialInfo *) instanceData; /* * Parse options. This would be far easier if we had Tcl_Objs to work with * as that would let us use Tcl_GetIndexFromObj()... */ len = strlen(optionName); vlen = strlen(value); /* * Option -mode baud,parity,databits,stopbits */ if ((len > 2) && (strncmp(optionName, "-mode", len) == 0)) { if (!GetCommState(infoPtr->handle, &dcb)) { goto getStateFailed; } native = Tcl_WinUtfToTChar(value, -1, &ds); result = BuildCommDCB(native, &dcb); Tcl_DStringFree(&ds); if (result == FALSE) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad value \"%s\" for -mode: should be baud,parity,data,stop", value)); Tcl_SetErrorCode(interp, "TCL", "VALUE", "SERIALMODE", NULL); } return TCL_ERROR; } /* * Default settings for serial communications. */ dcb.fBinary = TRUE; dcb.fErrorChar = FALSE; dcb.fNull = FALSE; dcb.fAbortOnError = FALSE; if (!SetCommState(infoPtr->handle, &dcb)) { goto setStateFailed; } return TCL_OK; } /* * Option -handshake none|xonxoff|rtscts|dtrdsr */ if ((len > 1) && (strncmp(optionName, "-handshake", len) == 0)) { if (!GetCommState(infoPtr->handle, &dcb)) { goto getStateFailed; } /* * Reset all handshake options. DTR and RTS are ON by default. */ dcb.fOutX = dcb.fInX = FALSE; dcb.fOutxCtsFlow = dcb.fOutxDsrFlow = dcb.fDsrSensitivity = FALSE; dcb.fDtrControl = DTR_CONTROL_ENABLE; dcb.fRtsControl = RTS_CONTROL_ENABLE; dcb.fTXContinueOnXoff = FALSE; /* * Adjust the handshake limits. Yes, the XonXoff limits seem to * influence even hardware handshake. */ dcb.XonLim = (WORD) (infoPtr->sysBufRead*1/2); dcb.XoffLim = (WORD) (infoPtr->sysBufRead*1/4); if (strncasecmp(value, "NONE", vlen) == 0) { /* * Leave all handshake options disabled. */ } else if (strncasecmp(value, "XONXOFF", vlen) == 0) { dcb.fOutX = dcb.fInX = TRUE; } else if (strncasecmp(value, "RTSCTS", vlen) == 0) { dcb.fOutxCtsFlow = TRUE; dcb.fRtsControl = RTS_CONTROL_HANDSHAKE; } else if (strncasecmp(value, "DTRDSR", vlen) == 0) { dcb.fOutxDsrFlow = TRUE; dcb.fDtrControl = DTR_CONTROL_HANDSHAKE; } else { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad value \"%s\" for -handshake: must be one of" " xonxoff, rtscts, dtrdsr or none", value)); Tcl_SetErrorCode(interp, "TCL", "VALUE", "HANDSHAKE", NULL); } return TCL_ERROR; } if (!SetCommState(infoPtr->handle, &dcb)) { goto setStateFailed; } return TCL_OK; } /* * Option -xchar {\x11 \x13} */ if ((len > 1) && (strncmp(optionName, "-xchar", len) == 0)) { if (!GetCommState(infoPtr->handle, &dcb)) { goto getStateFailed; } if (Tcl_SplitList(interp, value, &argc, &argv) == TCL_ERROR) { return TCL_ERROR; } if (argc != 2) { badXchar: if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "bad value for -xchar: should be a list of" " two elements with each a single character", -1)); Tcl_SetErrorCode(interp, "TCL", "VALUE", "XCHAR", NULL); } ckfree(argv); return TCL_ERROR; } /* * These dereferences are safe, even in the zero-length string cases, * because that just makes the xon/xoff character into NUL. When the * character looks like it is UTF-8 encoded, decode it before casting * into the format required for the Win guts. Note that this does not * convert character sets; it is expected that when people set the * control characters to something large and custom, they'll know the * hex/octal value rather than the printable form. */ dcb.XonChar = argv[0][0]; dcb.XoffChar = argv[1][0]; if (argv[0][0] & 0x80 || argv[1][0] & 0x80) { Tcl_UniChar character = 0; int charLen; charLen = Tcl_UtfToUniChar(argv[0], &character); if (argv[0][charLen]) { goto badXchar; } dcb.XonChar = (char) character; charLen = Tcl_UtfToUniChar(argv[1], &character); if (argv[1][charLen]) { goto badXchar; } dcb.XoffChar = (char) character; } ckfree(argv); if (!SetCommState(infoPtr->handle, &dcb)) { goto setStateFailed; } return TCL_OK; } /* * Option -ttycontrol {DTR 1 RTS 0 BREAK 0} */ if ((len > 4) && (strncmp(optionName, "-ttycontrol", len) == 0)) { int i, result = TCL_OK; if (Tcl_SplitList(interp, value, &argc, &argv) == TCL_ERROR) { return TCL_ERROR; } if ((argc % 2) == 1) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad value \"%s\" for -ttycontrol: should be " "a list of signal,value pairs", value)); Tcl_SetErrorCode(interp, "TCL", "VALUE", "TTYCONTROL", NULL); } ckfree(argv); return TCL_ERROR; } for (i = 0; i < argc - 1; i += 2) { if (Tcl_GetBoolean(interp, argv[i+1], &flag) == TCL_ERROR) { result = TCL_ERROR; break; } if (strncasecmp(argv[i], "DTR", strlen(argv[i])) == 0) { if (!EscapeCommFunction(infoPtr->handle, (DWORD) (flag ? SETDTR : CLRDTR))) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "can't set DTR signal", -1)); Tcl_SetErrorCode(interp, "TCL", "OPERATION", "FCONFIGURE", "TTY_SIGNAL", NULL); } result = TCL_ERROR; break; } } else if (strncasecmp(argv[i], "RTS", strlen(argv[i])) == 0) { if (!EscapeCommFunction(infoPtr->handle, (DWORD) (flag ? SETRTS : CLRRTS))) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "can't set RTS signal", -1)); Tcl_SetErrorCode(interp, "TCL", "OPERATION", "FCONFIGURE", "TTY_SIGNAL", NULL); } result = TCL_ERROR; break; } } else if (strncasecmp(argv[i], "BREAK", strlen(argv[i])) == 0) { if (!EscapeCommFunction(infoPtr->handle, (DWORD) (flag ? SETBREAK : CLRBREAK))) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "can't set BREAK signal", -1)); Tcl_SetErrorCode(interp, "TCL", "OPERATION", "FCONFIGURE", "TTY_SIGNAL", NULL); } result = TCL_ERROR; break; } } else { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad signal name \"%s\" for -ttycontrol: must be" " DTR, RTS or BREAK", argv[i])); Tcl_SetErrorCode(interp, "TCL", "VALUE", "TTY_SIGNAL", NULL); } result = TCL_ERROR; break; } } ckfree(argv); return result; } /* * Option -sysbuffer {read_size write_size} * Option -sysbuffer read_size */ if ((len > 1) && (strncmp(optionName, "-sysbuffer", len) == 0)) { /* * -sysbuffer 4096 or -sysbuffer {64536 4096} */ int inSize = -1, outSize = -1; if (Tcl_SplitList(interp, value, &argc, &argv) == TCL_ERROR) { return TCL_ERROR; } if (argc == 1) { inSize = atoi(argv[0]); outSize = infoPtr->sysBufWrite; } else if (argc == 2) { inSize = atoi(argv[0]); outSize = atoi(argv[1]); } ckfree(argv); if ((argc < 1) || (argc > 2) || (inSize <= 0) || (outSize <= 0)) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad value \"%s\" for -sysbuffer: should be " "a list of one or two integers > 0", value)); Tcl_SetErrorCode(interp, "TCL", "VALUE", "SYS_BUFFER", NULL); } return TCL_ERROR; } if (!SetupComm(infoPtr->handle, inSize, outSize)) { if (interp != NULL) { TclWinConvertError(GetLastError()); Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't setup comm buffers: %s", Tcl_PosixError(interp))); } return TCL_ERROR; } infoPtr->sysBufRead = inSize; infoPtr->sysBufWrite = outSize; /* * Adjust the handshake limits. Yes, the XonXoff limits seem to * influence even hardware handshake. */ if (!GetCommState(infoPtr->handle, &dcb)) { goto getStateFailed; } dcb.XonLim = (WORD) (infoPtr->sysBufRead*1/2); dcb.XoffLim = (WORD) (infoPtr->sysBufRead*1/4); if (!SetCommState(infoPtr->handle, &dcb)) { goto setStateFailed; } return TCL_OK; } /* * Option -pollinterval msec */ if ((len > 1) && (strncmp(optionName, "-pollinterval", len) == 0)) { if (Tcl_GetInt(interp, value, &(infoPtr->blockTime)) != TCL_OK) { return TCL_ERROR; } return TCL_OK; } /* * Option -timeout msec */ if ((len > 2) && (strncmp(optionName, "-timeout", len) == 0)) { int msec; COMMTIMEOUTS tout = {0,0,0,0,0}; if (Tcl_GetInt(interp, value, &msec) != TCL_OK) { return TCL_ERROR; } tout.ReadTotalTimeoutConstant = msec; if (!SetCommTimeouts(infoPtr->handle, &tout)) { if (interp != NULL) { TclWinConvertError(GetLastError()); Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't set comm timeouts: %s", Tcl_PosixError(interp))); } return TCL_ERROR; } return TCL_OK; } return Tcl_BadChannelOption(interp, optionName, "mode handshake pollinterval sysbuffer timeout ttycontrol xchar"); getStateFailed: if (interp != NULL) { TclWinConvertError(GetLastError()); Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't get comm state: %s", Tcl_PosixError(interp))); } return TCL_ERROR; setStateFailed: if (interp != NULL) { TclWinConvertError(GetLastError()); Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't set comm state: %s", Tcl_PosixError(interp))); } return TCL_ERROR; } /* *---------------------------------------------------------------------- * * SerialGetOptionProc -- * * Gets a mode associated with an IO channel. If the optionName arg is * non NULL, retrieves the value of that option. If the optionName arg is * NULL, retrieves a list of alternating option names and values for the * given channel. * * Results: * A standard Tcl result. Also sets the supplied DString to the string * value of the option(s) returned. * * Side effects: * The string returned by this function is in static storage and may be * reused at any time subsequent to the call. * *---------------------------------------------------------------------- */ static int SerialGetOptionProc( ClientData instanceData, /* File state. */ Tcl_Interp *interp, /* For error reporting - can be NULL. */ const char *optionName, /* Option to get. */ Tcl_DString *dsPtr) /* Where to store value(s). */ { SerialInfo *infoPtr; DCB dcb; size_t len; int valid = 0; /* Flag if valid option parsed. */ infoPtr = (SerialInfo *) instanceData; if (optionName == NULL) { len = 0; } else { len = strlen(optionName); } /* * Get option -mode */ if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-mode"); } if (len==0 || (len>2 && (strncmp(optionName, "-mode", len) == 0))) { char parity; const char *stop; char buf[2 * TCL_INTEGER_SPACE + 16]; if (!GetCommState(infoPtr->handle, &dcb)) { if (interp != NULL) { TclWinConvertError(GetLastError()); Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't get comm state: %s", Tcl_PosixError(interp))); } return TCL_ERROR; } valid = 1; parity = 'n'; if (dcb.Parity <= 4) { parity = "noems"[dcb.Parity]; } stop = (dcb.StopBits == ONESTOPBIT) ? "1" : (dcb.StopBits == ONE5STOPBITS) ? "1.5" : "2"; wsprintfA(buf, "%d,%c,%d,%s", dcb.BaudRate, parity, dcb.ByteSize, stop); Tcl_DStringAppendElement(dsPtr, buf); } /* * Get option -pollinterval */ if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-pollinterval"); } if (len==0 || (len>1 && strncmp(optionName, "-pollinterval", len)==0)) { char buf[TCL_INTEGER_SPACE + 1]; valid = 1; wsprintfA(buf, "%d", infoPtr->blockTime); Tcl_DStringAppendElement(dsPtr, buf); } /* * Get option -sysbuffer */ if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-sysbuffer"); Tcl_DStringStartSublist(dsPtr); } if (len==0 || (len>1 && strncmp(optionName, "-sysbuffer", len) == 0)) { char buf[TCL_INTEGER_SPACE + 1]; valid = 1; wsprintfA(buf, "%d", infoPtr->sysBufRead); Tcl_DStringAppendElement(dsPtr, buf); wsprintfA(buf, "%d", infoPtr->sysBufWrite); Tcl_DStringAppendElement(dsPtr, buf); } if (len == 0) { Tcl_DStringEndSublist(dsPtr); } /* * Get option -xchar */ if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-xchar"); Tcl_DStringStartSublist(dsPtr); } if (len==0 || (len>1 && strncmp(optionName, "-xchar", len) == 0)) { char buf[4]; valid = 1; if (!GetCommState(infoPtr->handle, &dcb)) { if (interp != NULL) { TclWinConvertError(GetLastError()); Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't get comm state: %s", Tcl_PosixError(interp))); } return TCL_ERROR; } sprintf(buf, "%c", dcb.XonChar); Tcl_DStringAppendElement(dsPtr, buf); sprintf(buf, "%c", dcb.XoffChar); Tcl_DStringAppendElement(dsPtr, buf); } if (len == 0) { Tcl_DStringEndSublist(dsPtr); } /* * Get option -lasterror * * Option is readonly and returned by [fconfigure chan -lasterror] but not * returned by unnamed [fconfigure chan]. */ if (len>1 && strncmp(optionName, "-lasterror", len)==0) { valid = 1; SerialErrorStr(infoPtr->lastError, dsPtr); } /* * get option -queue * * Option is readonly and returned by [fconfigure chan -queue]. */ if (len>1 && strncmp(optionName, "-queue", len)==0) { char buf[TCL_INTEGER_SPACE + 1]; COMSTAT cStat; DWORD error; int inBuffered, outBuffered, count; valid = 1; /* * Query the pending data in Tcl's internal queues. */ inBuffered = Tcl_InputBuffered(infoPtr->channel); outBuffered = Tcl_OutputBuffered(infoPtr->channel); /* * Query the number of bytes in our output queue: * 1. The bytes pending in the output thread * 2. The bytes in the system drivers buffer * The writer thread should not interfere this action. */ EnterCriticalSection(&infoPtr->csWrite); ClearCommError(infoPtr->handle, &error, &cStat); count = (int) cStat.cbOutQue + infoPtr->writeQueue; LeaveCriticalSection(&infoPtr->csWrite); wsprintfA(buf, "%d", inBuffered + cStat.cbInQue); Tcl_DStringAppendElement(dsPtr, buf); wsprintfA(buf, "%d", outBuffered + count); Tcl_DStringAppendElement(dsPtr, buf); } /* * get option -ttystatus * * Option is readonly and returned by [fconfigure chan -ttystatus] but not * returned by unnamed [fconfigure chan]. */ if (len>4 && strncmp(optionName, "-ttystatus", len)==0) { DWORD status; if (!GetCommModemStatus(infoPtr->handle, &status)) { if (interp != NULL) { TclWinConvertError(GetLastError()); Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't get tty status: %s", Tcl_PosixError(interp))); } return TCL_ERROR; } valid = 1; SerialModemStatusStr(status, dsPtr); } if (valid) { return TCL_OK; } return Tcl_BadChannelOption(interp, optionName, "mode pollinterval lasterror queue sysbuffer ttystatus xchar"); } /* *---------------------------------------------------------------------- * * SerialThreadActionProc -- * * Insert or remove any thread local refs to this channel. * * Results: * None. * * Side effects: * Changes thread local list of valid channels. * *---------------------------------------------------------------------- */ static void SerialThreadActionProc( ClientData instanceData, int action) { SerialInfo *infoPtr = (SerialInfo *) instanceData; /* * We do not access firstSerialPtr in the thread structures. This is not * for all serials managed by the thread, but only those we are watching. * Removal of the filevent handlers before transfer thus takes care of * this structure. */ Tcl_MutexLock(&serialMutex); if (action == TCL_CHANNEL_THREAD_INSERT) { /* * We can't copy the thread information from the channel when the * channel is created. At this time the channel back pointer has not * been set yet. However in that case the threadId has already been * set by TclpCreateCommandChannel itself, so the structure is still * good. */ SerialInit(); if (infoPtr->channel != NULL) { infoPtr->threadId = Tcl_GetChannelThread(infoPtr->channel); } } else { infoPtr->threadId = NULL; } Tcl_MutexUnlock(&serialMutex); } /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */