path: root/generic/tclCompile.h

/*
 * tclCompile.h --
 *
 * Copyright (c) 1996-1998 Sun Microsystems, Inc.
 * Copyright (c) 1998-2000 by Scriptics Corporation.
 * Copyright (c) 2001 by Kevin B. Kenny. All rights reserved.
 * Copyright (c) 2007 Daniel A. Steffen <das@users.sourceforge.net>
 *
 * See the file "license.terms" for information on usage and redistribution of
 * this file, and for a DISCLAIMER OF ALL WARRANTIES.
 */

#ifndef _TCLCOMPILATION
#define _TCLCOMPILATION 1

#include "tclInt.h"

struct ByteCode;		/* Forward declaration. */

/*
 *------------------------------------------------------------------------
 * Variables related to compilation. These are used in tclCompile.c,
 * tclExecute.c, tclBasic.c, and their clients.
 *------------------------------------------------------------------------
 */

#ifdef TCL_COMPILE_DEBUG
/*
 * Variable that controls whether compilation tracing is enabled and, if so,
 * what level of tracing is desired:
 *    0: no compilation tracing
 *    1: summarize compilation of top level cmds and proc bodies
 *    2: display all instructions of each ByteCode compiled
 * This variable is linked to the Tcl variable "tcl_traceCompile".
 */

MODULE_SCOPE int 	tclTraceCompile;

/*
 * Variable that controls whether execution tracing is enabled and, if so,
 * what level of tracing is desired:
 *    0: no execution tracing
 *    1: trace invocations of Tcl procs only
 *    2: trace invocations of all (not compiled away) commands
 *    3: display each instruction executed
 * This variable is linked to the Tcl variable "tcl_traceExec".
 */

MODULE_SCOPE int 	tclTraceExec;
#endif

/*
 * The type of lambda expressions. Note that every lambda will *always* have a
 * string representation.
 */

MODULE_SCOPE const Tcl_ObjType tclLambdaType;

/*
 *------------------------------------------------------------------------
 * Data structures related to compilation.
 *------------------------------------------------------------------------
 */

/*
 * The structure used to implement Tcl "exceptions" (exceptional returns): for
 * example, those generated in loops by the break and continue commands, and
 * those generated by scripts and caught by the catch command. This
 * ExceptionRange structure describes a range of code (e.g., a loop body), the
 * kind of exceptions (e.g., a break or continue) that might occur, and the PC
 * offsets to jump to if a matching exception does occur. Exception ranges can
 * nest so this structure includes a nesting level that is used at runtime to
 * find the closest exception range surrounding a PC. For example, when a
 * break command is executed, the ExceptionRange structure for the most deeply
 * nested loop, if any, is found and used. These structures are also generated
 * for the "next" subcommands of for loops since a break there terminates the
 * for command. This means a for command actually generates two LoopInfo
 * structures.
 */

typedef enum {
    LOOP_EXCEPTION_RANGE,	/* Exception's range is part of a loop. Break
				 * and continue "exceptions" cause jumps to
				 * appropriate PC offsets. */
    CATCH_EXCEPTION_RANGE	/* Exception's range is controlled by a catch
				 * command. Errors in the range cause a jump
				 * to a catch PC offset. */
} ExceptionRangeType;

typedef struct {
    ExceptionRangeType type;	/* The kind of ExceptionRange. */
    Tcl_Size nestingLevel;		/* Static depth of the exception range. Used
				 * to find the most deeply-nested range
				 * surrounding a PC at runtime. */
    Tcl_Size codeOffset;		/* Offset of the first instruction byte of the
				 * code range. */
    Tcl_Size numCodeBytes;		/* Number of bytes in the code range. */
    Tcl_Size breakOffset;		/* If LOOP_EXCEPTION_RANGE, the target PC
				 * offset for a break command in the range. */
    Tcl_Size continueOffset;		/* If LOOP_EXCEPTION_RANGE and not TCL_INDEX_NONE, the
				 * target PC offset for a continue command in
				 * the code range. Otherwise, ignore this
				 * range when processing a continue
				 * command. */
    Tcl_Size catchOffset;		/* If a CATCH_EXCEPTION_RANGE, the target PC
				 * offset for any "exception" in range. */
} ExceptionRange;

/*
 * Auxiliary data used when issuing (currently just loop) exception ranges,
 * but which is not required during execution.
 */

typedef struct ExceptionAux {
    int supportsContinue;	/* Whether this exception range will have a
				 * continueOffset created for it; if it is a
				 * loop exception range that *doesn't* have
				 * one (see [for] next-clause) then we must
				 * not pick up the range when scanning for a
				 * target to continue to. */
    Tcl_Size stackDepth;		/* The stack depth at the point where the
				 * exception range was created. This is used
				 * to calculate the number of POPs required to
				 * restore the stack to its prior state. */
    Tcl_Size expandTarget;		/* The number of expansions expected on the
				 * auxData stack at the time the loop starts;
				 * we can't currently discard them except by
				 * doing INST_INVOKE_EXPANDED; this is a known
				 * problem. */
    Tcl_Size expandTargetDepth;	/* The stack depth expected at the outermost
				 * expansion within the loop. Not meaningful
				 * if there are no open expansions between the
				 * looping level and the point of jump
				 * issue. */
    Tcl_Size numBreakTargets;	/* The number of [break]s that want to be
				 * targeted to the place where this loop
				 * exception will be bound to. */
    TCL_HASH_TYPE *breakTargets;	/* The offsets of the INST_JUMP4 instructions
				 * issued by the [break]s that we must
				 * update. Note that resizing a jump (via
				 * TclFixupForwardJump) can cause the contents
				 * of this array to be updated. When
				 * numBreakTargets==0, this is NULL. */
    Tcl_Size allocBreakTargets;	/* The size of the breakTargets array. */
    Tcl_Size numContinueTargets;	/* The number of [continue]s that want to be
				 * targeted to the place where this loop
				 * exception will be bound to. */
    TCL_HASH_TYPE *continueTargets; /* The offsets of the INST_JUMP4 instructions
				 * issued by the [continue]s that we must
				 * update. Note that resizing a jump (via
				 * TclFixupForwardJump) can cause the contents
				 * of this array to be updated. When
				 * numContinueTargets==0, this is NULL. */
    Tcl_Size allocContinueTargets;	/* The size of the continueTargets array. */
} ExceptionAux;

/*
 * Structure used to map between instruction pc and source locations. It
 * defines for each compiled Tcl command its code's starting offset and its
 * source's starting offset and length. Note that the code offset increases
 * monotonically: that is, the table is sorted in code offset order. The
 * source offset is not monotonic.
 */

typedef struct {
    Tcl_Size codeOffset;		/* Offset of first byte of command code. */
    Tcl_Size numCodeBytes;		/* Number of bytes for command's code. */
    Tcl_Size srcOffset;		/* Offset of first char of the command. */
    Tcl_Size numSrcBytes;		/* Number of command source chars. */
} CmdLocation;

/*
 * TIP #280
 * Structure to record additional location information for byte code. This
 * information is internal and not saved. i.e. tbcload'ed code will not have
 * this information. It records the lines for all words of all commands found
 * in the byte code. The association with a ByteCode structure BC is done
 * through the 'lineBCPtr' HashTable in Interp, keyed by the address of BC.
 * Also recorded is information coming from the context, i.e. type of the
 * frame and associated information, like the path of a sourced file.
 */

typedef struct {
    Tcl_Size srcOffset;		/* Command location to find the entry. */
    Tcl_Size nline;			/* Number of words in the command */
    int *line;			/* Line information for all words in the
				 * command. */
    int **next;			/* Transient information used by the compiler
				 * for tracking of hidden continuation
				 * lines. */
} ECL;

typedef struct {
    int type;			/* Context type. */
    int start;			/* Starting line for compiled script. Needed
				 * for the extended recompile check in
				 * tclCompileObj. */
    Tcl_Obj *path;		/* Path of the sourced file the command is
				 * in. */
    ECL *loc;			/* Command word locations (lines). */
    Tcl_Size nloc;			/* Number of allocated entries in 'loc'. */
    Tcl_Size nuloc;			/* Number of used entries in 'loc'. */
} ExtCmdLoc;

/*
 * CompileProcs need the ability to record information during compilation that
 * can be used by bytecode instructions during execution. The AuxData
 * structure provides this "auxiliary data" mechanism. An arbitrary number of
 * these structures can be stored in the ByteCode record (during compilation
 * they are stored in a CompileEnv structure). Each AuxData record holds one
 * word of client-specified data (often a pointer) and is given an index that
 * instructions can later use to look up the structure and its data.
 *
 * The following definitions declare the types of procedures that are called
 * to duplicate or free this auxiliary data when the containing ByteCode
 * objects are duplicated and freed. Pointers to these procedures are kept in
 * the AuxData structure.
 */

typedef void *(AuxDataDupProc)  (void *clientData);
typedef void	   (AuxDataFreeProc) (void *clientData);
typedef void	   (AuxDataPrintProc)(void *clientData,
			    Tcl_Obj *appendObj, struct ByteCode *codePtr,
			    TCL_HASH_TYPE pcOffset);

/*
 * We define a separate AuxDataType struct to hold type-related information
 * for the AuxData structure. This separation makes it possible for clients
 * outside of the TCL core to manipulate (in a limited fashion!) AuxData; for
 * example, it makes it possible to pickle and unpickle AuxData structs.
 */

typedef struct AuxDataType {
    const char *name;		/* The name of the type. Types can be
				 * registered and found by name */
    AuxDataDupProc *dupProc;	/* Callback procedure to invoke when the aux
				 * data is duplicated (e.g., when the ByteCode
				 * structure containing the aux data is
				 * duplicated). NULL means just copy the
				 * source clientData bits; no proc need be
				 * called. */
    AuxDataFreeProc *freeProc;	/* Callback procedure to invoke when the aux
				 * data is freed. NULL means no proc need be
				 * called. */
    AuxDataPrintProc *printProc;/* Callback function to invoke when printing
				 * the aux data as part of debugging. NULL
				 * means that the data can't be printed. */
    AuxDataPrintProc *disassembleProc;
				/* Callback function to invoke when doing a
				 * disassembly of the aux data (like the
				 * printProc, except that the output is
				 * intended to be script-readable). The
				 * appendObj argument should be filled in with
				 * a descriptive dictionary; it will start out
				 * with "name" mapped to the content of the
				 * name field. NULL means that the printProc
				 * should be used instead. */
} AuxDataType;

/*
 * The definition of the AuxData structure that holds information created
 * during compilation by CompileProcs and used by instructions during
 * execution.
 */

typedef struct AuxData {
    const AuxDataType *type;	/* Pointer to the AuxData type associated with
				 * this ClientData. */
    void *clientData;	/* The compilation data itself. */
} AuxData;

/*
 * Structure defining the compilation environment. After compilation, fields
 * describing bytecode instructions are copied out into the more compact
 * ByteCode structure defined below.
 */

#define COMPILEENV_INIT_CODE_BYTES    250
#define COMPILEENV_INIT_NUM_OBJECTS    60
#define COMPILEENV_INIT_EXCEPT_RANGES   5
#define COMPILEENV_INIT_CMD_MAP_SIZE   40
#define COMPILEENV_INIT_AUX_DATA_SIZE   5

typedef struct CompileEnv {
    Interp *iPtr;		/* Interpreter containing the code being
				 * compiled. Commands and their compile procs
				 * are specific to an interpreter so the code
				 * emitted will depend on the interpreter. */
    const char *source;		/* The source string being compiled by
				 * SetByteCodeFromAny. This pointer is not
				 * owned by the CompileEnv and must not be
				 * freed or changed by it. */
    Tcl_Size numSrcBytes;		/* Number of bytes in source. */
    Proc *procPtr;		/* If a procedure is being compiled, a pointer
				 * to its Proc structure; otherwise NULL. Used
				 * to compile local variables. Set from
				 * information provided by ObjInterpProc in
				 * tclProc.c. */
    Tcl_Size numCommands;		/* Number of commands compiled. */
    Tcl_Size exceptDepth;		/* Current exception range nesting level; TCL_INDEX_NONE
				 * if not in any range currently. */
    Tcl_Size maxExceptDepth;		/* Max nesting level of exception ranges; TCL_INDEX_NONE
				 * if no ranges have been compiled. */
    Tcl_Size maxStackDepth;		/* Maximum number of stack elements needed to
				 * execute the code. Set by compilation
				 * procedures before returning. */
    Tcl_Size currStackDepth;		/* Current stack depth. */
    LiteralTable localLitTable;	/* Contains LiteralEntry's describing all Tcl
				 * objects referenced by this compiled code.
				 * Indexed by the string representations of
				 * the literals. Used to avoid creating
				 * duplicate objects. */
    unsigned char *codeStart;	/* Points to the first byte of the code. */
    unsigned char *codeNext;	/* Points to next code array byte to use. */
    unsigned char *codeEnd;	/* Points just after the last allocated code
				 * array byte. */
    int mallocedCodeArray;	/* Set 1 if code array was expanded and
				 * codeStart points into the heap.*/
#if TCL_MAJOR_VERSION > 8
    int mallocedExceptArray;	/* 1 if ExceptionRange array was expanded and
				 * exceptArrayPtr points in heap, else 0. */
#endif
    LiteralEntry *literalArrayPtr;
    				/* Points to start of LiteralEntry array. */
    Tcl_Size literalArrayNext;	/* Index of next free object array entry. */
    Tcl_Size literalArrayEnd;	/* Index just after last obj array entry. */
    int mallocedLiteralArray;	/* 1 if object array was expanded and objArray
				 * points into the heap, else 0. */
    ExceptionRange *exceptArrayPtr;
    				/* Points to start of the ExceptionRange
				 * array. */
    Tcl_Size exceptArrayNext;	/* Next free ExceptionRange array index.
				 * exceptArrayNext is the number of ranges and
				 * (exceptArrayNext-1) is the index of the
				 * current range's array entry. */
    Tcl_Size exceptArrayEnd;		/* Index after the last ExceptionRange array
				 * entry. */
#if TCL_MAJOR_VERSION < 9
    int mallocedExceptArray;
#endif
    ExceptionAux *exceptAuxArrayPtr;
				/* Array of information used to restore the
				 * state when processing BREAK/CONTINUE
				 * exceptions. Must be the same size as the
				 * exceptArrayPtr. */
    CmdLocation *cmdMapPtr;	/* Points to start of CmdLocation array.
				 * numCommands is the index of the next entry
				 * to use; (numCommands-1) is the entry index
				 * for the last command. */
    Tcl_Size cmdMapEnd;		/* Index after last CmdLocation entry. */
    int mallocedCmdMap;		/* 1 if command map array was expanded and
				 * cmdMapPtr points in the heap, else 0. */
#if TCL_MAJOR_VERSION > 8
    int mallocedAuxDataArray;	/* 1 if aux data array was expanded and
				 * auxDataArrayPtr points in heap else 0. */
#endif
    AuxData *auxDataArrayPtr;	/* Points to auxiliary data array start. */
    Tcl_Size auxDataArrayNext;	/* Next free compile aux data array index.
				 * auxDataArrayNext is the number of aux data
				 * items and (auxDataArrayNext-1) is index of
				 * current aux data array entry. */
    Tcl_Size auxDataArrayEnd;	/* Index after last aux data array entry. */
#if TCL_MAJOR_VERSION < 9
    int mallocedAuxDataArray;
#endif
    unsigned char staticCodeSpace[COMPILEENV_INIT_CODE_BYTES];
				/* Initial storage for code. */
    LiteralEntry staticLiteralSpace[COMPILEENV_INIT_NUM_OBJECTS];
				/* Initial storage of LiteralEntry array. */
    ExceptionRange staticExceptArraySpace[COMPILEENV_INIT_EXCEPT_RANGES];
				/* Initial ExceptionRange array storage. */
    ExceptionAux staticExAuxArraySpace[COMPILEENV_INIT_EXCEPT_RANGES];
				/* Initial static except auxiliary info array
				 * storage. */
    CmdLocation staticCmdMapSpace[COMPILEENV_INIT_CMD_MAP_SIZE];
				/* Initial storage for cmd location map. */
    AuxData staticAuxDataArraySpace[COMPILEENV_INIT_AUX_DATA_SIZE];
				/* Initial storage for aux data array. */
    /* TIP #280 */
    ExtCmdLoc *extCmdMapPtr;	/* Extended command location information for
				 * 'info frame'. */
    Tcl_Size line;			/* First line of the script, based on the
				 * invoking context, then the line of the
				 * command currently compiled. */
    int atCmdStart;		/* Flag to say whether an INST_START_CMD
				 * should be issued; they should never be
				 * issued repeatedly, as that is significantly
				 * inefficient. If set to 2, that instruction
				 * should not be issued at all (by the generic
				 * part of the command compiler). */
    Tcl_Size expandCount;		/* Number of INST_EXPAND_START instructions
				 * encountered that have not yet been paired
				 * with a corresponding
				 * INST_INVOKE_EXPANDED. */
    int *clNext;		/* If not NULL, it refers to the next slot in
				 * clLoc to check for an invisible
				 * continuation line. */
} CompileEnv;

/*
 * The structure defining the bytecode instructions resulting from compiling a
 * Tcl script. Note that this structure is variable length: a single heap
 * object is allocated to hold the ByteCode structure immediately followed by
 * the code bytes, the literal object array, the ExceptionRange array, the
 * CmdLocation map, and the compilation AuxData array.
 */

/*
 * A PRECOMPILED bytecode struct is one that was generated from a compiled
 * image rather than implicitly compiled from source
 */

#define TCL_BYTECODE_PRECOMPILED		0x0001

/*
 * When a bytecode is compiled, interp or namespace resolvers have not been
 * applied yet: this is indicated by the TCL_BYTECODE_RESOLVE_VARS flag.
 */

#define TCL_BYTECODE_RESOLVE_VARS		0x0002

#define TCL_BYTECODE_RECOMPILE			0x0004

typedef struct ByteCode {
    TclHandle interpHandle;	/* Handle for interpreter containing the
				 * compiled code. Commands and their compile
				 * procs are specific to an interpreter so the
				 * code emitted will depend on the
				 * interpreter. */
    Tcl_Size compileEpoch;		/* Value of iPtr->compileEpoch when this
				 * ByteCode was compiled. Used to invalidate
				 * code when, e.g., commands with compile
				 * procs are redefined. */
    Namespace *nsPtr;		/* Namespace context in which this code was
				 * compiled. If the code is executed if a
				 * different namespace, it must be
				 * recompiled. */
    Tcl_Size nsEpoch;		/* Value of nsPtr->resolverEpoch when this
				 * ByteCode was compiled. Used to invalidate
				 * code when new namespace resolution rules
				 * are put into effect. */
    Tcl_Size refCount;		/* Reference count: set 1 when created plus 1
				 * for each execution of the code currently
				 * active. This structure can be freed when
				 * refCount becomes zero. */
    unsigned int flags;		/* flags describing state for the codebyte.
				 * this variable holds ORed values from the
				 * TCL_BYTECODE_ masks defined above */
    const char *source;		/* The source string from which this ByteCode
				 * was compiled. Note that this pointer is not
				 * owned by the ByteCode and must not be freed
				 * or modified by it. */
    Proc *procPtr;		/* If the ByteCode was compiled from a
				 * procedure body, this is a pointer to its
				 * Proc structure; otherwise NULL. This
				 * pointer is also not owned by the ByteCode
				 * and must not be freed by it. */
    size_t structureSize;	/* Number of bytes in the ByteCode structure
				 * itself. Does not include heap space for
				 * literal Tcl objects or storage referenced
				 * by AuxData entries. */
    Tcl_Size numCommands;		/* Number of commands compiled. */
    Tcl_Size numSrcBytes;		/* Number of source bytes compiled. */
    Tcl_Size numCodeBytes;		/* Number of code bytes. */
    Tcl_Size numLitObjects;		/* Number of objects in literal array. */
    Tcl_Size numExceptRanges;	/* Number of ExceptionRange array elems. */
    Tcl_Size numAuxDataItems;	/* Number of AuxData items. */
    Tcl_Size numCmdLocBytes;		/* Number of bytes needed for encoded command
				 * location information. */
    Tcl_Size maxExceptDepth;		/* Maximum nesting level of ExceptionRanges;
				 * TCL_INDEX_NONE if no ranges were compiled. */
    Tcl_Size maxStackDepth;		/* Maximum number of stack elements needed to
				 * execute the code. */
    unsigned char *codeStart;	/* Points to the first byte of the code. This
				 * is just after the final ByteCode member
				 * cmdMapPtr. */
    Tcl_Obj **objArrayPtr;	/* Points to the start of the literal object
				 * array. This is just after the last code
				 * byte. */
    ExceptionRange *exceptArrayPtr;
    				/* Points to the start of the ExceptionRange
				 * array. This is just after the last object
				 * in the object array. */
    AuxData *auxDataArrayPtr;	/* Points to the start of the auxiliary data
				 * array. This is just after the last entry in
				 * the ExceptionRange array. */
    unsigned char *codeDeltaStart;
				/* Points to the first of a sequence of bytes
				 * that encode the change in the starting
				 * offset of each command's code. If -127 <=
				 * delta <= 127, it is encoded as 1 byte,
				 * otherwise 0xFF (128) appears and the delta
				 * is encoded by the next 4 bytes. Code deltas
				 * are always positive. This sequence is just
				 * after the last entry in the AuxData
				 * array. */
    unsigned char *codeLengthStart;
				/* Points to the first of a sequence of bytes
				 * that encode the length of each command's
				 * code. The encoding is the same as for code
				 * deltas. Code lengths are always positive.
				 * This sequence is just after the last entry
				 * in the code delta sequence. */
    unsigned char *srcDeltaStart;
				/* Points to the first of a sequence of bytes
				 * that encode the change in the starting
				 * offset of each command's source. The
				 * encoding is the same as for code deltas.
				 * Source deltas can be negative. This
				 * sequence is just after the last byte in the
				 * code length sequence. */
    unsigned char *srcLengthStart;
				/* Points to the first of a sequence of bytes
				 * that encode the length of each command's
				 * source. The encoding is the same as for
				 * code deltas. Source lengths are always
				 * positive. This sequence is just after the
				 * last byte in the source delta sequence. */
    LocalCache *localCachePtr;	/* Pointer to the start of the cached variable
				 * names and initialisation data for local
				 * variables. */
#ifdef TCL_COMPILE_STATS
    Tcl_Time createTime;	/* Absolute time when the ByteCode was
				 * created. */
#endif /* TCL_COMPILE_STATS */
} ByteCode;

#define ByteCodeSetInternalRep(objPtr, typePtr, codePtr)			\
    do {								\
	Tcl_ObjInternalRep ir;						\
	ir.twoPtrValue.ptr1 = (codePtr);				\
	ir.twoPtrValue.ptr2 = NULL;					\
	Tcl_StoreInternalRep((objPtr), (typePtr), &ir);			\
    } while (0)



#define ByteCodeGetInternalRep(objPtr, typePtr, codePtr)			\
    do {								\
	const Tcl_ObjInternalRep *irPtr;					\
	irPtr = TclFetchInternalRep((objPtr), (typePtr));			\
	(codePtr) = irPtr ? (ByteCode*)irPtr->twoPtrValue.ptr1 : NULL;		\
    } while (0)

/*
 * Opcodes for the Tcl bytecode instructions. These must correspond to the
 * entries in the table of instruction descriptions, tclInstructionTable, in
 * tclCompile.c. Also, the order and number of the expression opcodes (e.g.,
 * INST_BITOR) must match the entries in the array operatorStrings in
 * tclExecute.c.
 */

enum TclInstruction {
    /* Opcodes 0 to 9 */
    INST_DONE = 0,
    INST_PUSH1,
    INST_PUSH4,
    INST_POP,
    INST_DUP,
    INST_STR_CONCAT1,
    INST_INVOKE_STK1,
    INST_INVOKE_STK4,
    INST_EVAL_STK,
    INST_EXPR_STK,

    /* Opcodes 10 to 23 */
    INST_LOAD_SCALAR1,
    INST_LOAD_SCALAR4,
    INST_LOAD_SCALAR_STK,
    INST_LOAD_ARRAY1,
    INST_LOAD_ARRAY4,
    INST_LOAD_ARRAY_STK,
    INST_LOAD_STK,
    INST_STORE_SCALAR1,
    INST_STORE_SCALAR4,
    INST_STORE_SCALAR_STK,
    INST_STORE_ARRAY1,
    INST_STORE_ARRAY4,
    INST_STORE_ARRAY_STK,
    INST_STORE_STK,

    /* Opcodes 24 to 33 */
    INST_INCR_SCALAR1,
    INST_INCR_SCALAR_STK,
    INST_INCR_ARRAY1,
    INST_INCR_ARRAY_STK,
    INST_INCR_STK,
    INST_INCR_SCALAR1_IMM,
    INST_INCR_SCALAR_STK_IMM,
    INST_INCR_ARRAY1_IMM,
    INST_INCR_ARRAY_STK_IMM,
    INST_INCR_STK_IMM,

    /* Opcodes 34 to 39 */
    INST_JUMP1,
    INST_JUMP4,
    INST_JUMP_TRUE1,
    INST_JUMP_TRUE4,
    INST_JUMP_FALSE1,
    INST_JUMP_FALSE4,

    /* Opcodes 42 to 64 */
    INST_BITOR,
    INST_BITXOR,
    INST_BITAND,
    INST_EQ,
    INST_NEQ,
    INST_LT,
    INST_GT,
    INST_LE,
    INST_GE,
    INST_LSHIFT,
    INST_RSHIFT,
    INST_ADD,
    INST_SUB,
    INST_MULT,
    INST_DIV,
    INST_MOD,
    INST_UPLUS,
    INST_UMINUS,
    INST_BITNOT,
    INST_LNOT,
    INST_TRY_CVT_TO_NUMERIC,

    /* Opcodes 65 to 66 */
    INST_BREAK,
    INST_CONTINUE,

    /* Opcodes 69 to 72 */
    INST_BEGIN_CATCH4,
    INST_END_CATCH,
    INST_PUSH_RESULT,
    INST_PUSH_RETURN_CODE,

    /* Opcodes 73 to 78 */
    INST_STR_EQ,
    INST_STR_NEQ,
    INST_STR_CMP,
    INST_STR_LEN,
    INST_STR_INDEX,
    INST_STR_MATCH,

    /* Opcodes 79 to 81 */
    INST_LIST,
    INST_LIST_INDEX,
    INST_LIST_LENGTH,

    /* Opcodes 82 to 87 */
    INST_APPEND_SCALAR1,
    INST_APPEND_SCALAR4,
    INST_APPEND_ARRAY1,
    INST_APPEND_ARRAY4,
    INST_APPEND_ARRAY_STK,
    INST_APPEND_STK,

    /* Opcodes 88 to 93 */
    INST_LAPPEND_SCALAR1,
    INST_LAPPEND_SCALAR4,
    INST_LAPPEND_ARRAY1,
    INST_LAPPEND_ARRAY4,
    INST_LAPPEND_ARRAY_STK,
    INST_LAPPEND_STK,

    /* TIP #22 - LINDEX operator with flat arg list */
    INST_LIST_INDEX_MULTI,

    /*
     * TIP #33 - 'lset' command. Code gen also required a Forth-like
     *	     OVER operation.
     */
    INST_OVER,
    INST_LSET_LIST,
    INST_LSET_FLAT,

    /* TIP#90 - 'return' command. */
    INST_RETURN_IMM,

    /* TIP#123 - exponentiation operator. */
    INST_EXPON,

    /* TIP #157 - {*}... (word expansion) language syntax support. */
    INST_EXPAND_START,
    INST_EXPAND_STKTOP,
    INST_INVOKE_EXPANDED,

    /*
     * TIP #57 - 'lassign' command. Code generation requires immediate
     *	     LINDEX and LRANGE operators.
     */
    INST_LIST_INDEX_IMM,
    INST_LIST_RANGE_IMM,
    INST_START_CMD,
    INST_LIST_IN,
    INST_LIST_NOT_IN,
    INST_PUSH_RETURN_OPTIONS,
    INST_RETURN_STK,

    /*
     * Dictionary (TIP#111) related commands.
     */
    INST_DICT_GET,
    INST_DICT_SET,
    INST_DICT_UNSET,
    INST_DICT_INCR_IMM,
    INST_DICT_APPEND,
    INST_DICT_LAPPEND,
    INST_DICT_FIRST,
    INST_DICT_NEXT,
    INST_DICT_UPDATE_START,
    INST_DICT_UPDATE_END,

    /*
     * Instruction to support jumps defined by tables (instead of the classic
     * [switch] technique of chained comparisons).
     */
    INST_JUMP_TABLE,

    /*
     * Instructions to support compilation of global, variable, upvar and
     * [namespace upvar].
     */
    INST_UPVAR,
    INST_NSUPVAR,
    INST_VARIABLE,

    /* Instruction to support compiling syntax error to bytecode */
    INST_SYNTAX,

    /* Instruction to reverse N items on top of stack */
    INST_REVERSE,

    /* regexp instruction */
    INST_REGEXP,

    /* For [info exists] compilation */
    INST_EXIST_SCALAR,
    INST_EXIST_ARRAY,
    INST_EXIST_ARRAY_STK,
    INST_EXIST_STK,

    /* For [subst] compilation */
    INST_NOP,
    INST_RETURN_CODE_BRANCH,

    /* For [unset] compilation */
    INST_UNSET_SCALAR,
    INST_UNSET_ARRAY,
    INST_UNSET_ARRAY_STK,
    INST_UNSET_STK,

    /* For [dict with], [dict exists], [dict create] and [dict merge] */
    INST_DICT_EXPAND,
    INST_DICT_RECOMBINE_STK,
    INST_DICT_RECOMBINE_IMM,
    INST_DICT_EXISTS,
    INST_DICT_VERIFY,

    /* For [string map] and [regsub] compilation */
    INST_STR_MAP,
    INST_STR_FIND,
    INST_STR_FIND_LAST,
    INST_STR_RANGE_IMM,
    INST_STR_RANGE,

    /* For operations to do with coroutines and other NRE-manipulators */
    INST_YIELD,
    INST_COROUTINE_NAME,
    INST_TAILCALL,

    /* For compilation of basic information operations */
    INST_NS_CURRENT,
    INST_INFO_LEVEL_NUM,
    INST_INFO_LEVEL_ARGS,
    INST_RESOLVE_COMMAND,

    /* For compilation relating to TclOO */
    INST_TCLOO_SELF,
    INST_TCLOO_CLASS,
    INST_TCLOO_NS,
    INST_TCLOO_IS_OBJECT,

    /* For compilation of [array] subcommands */
    INST_ARRAY_EXISTS_STK,
    INST_ARRAY_EXISTS_IMM,
    INST_ARRAY_MAKE_STK,
    INST_ARRAY_MAKE_IMM,

    INST_INVOKE_REPLACE,

    INST_LIST_CONCAT,

    INST_EXPAND_DROP,

    /* New foreach implementation */
    INST_FOREACH_START,
    INST_FOREACH_STEP,
    INST_FOREACH_END,
    INST_LMAP_COLLECT,

    /* For compilation of [string trim] and related */
    INST_STR_TRIM,
    INST_STR_TRIM_LEFT,
    INST_STR_TRIM_RIGHT,

    INST_CONCAT_STK,

    INST_STR_UPPER,
    INST_STR_LOWER,
    INST_STR_TITLE,
    INST_STR_REPLACE,

    INST_ORIGIN_COMMAND,

    INST_TCLOO_NEXT,
    INST_TCLOO_NEXT_CLASS,

    INST_YIELD_TO_INVOKE,

    INST_NUM_TYPE,
    INST_TRY_CVT_TO_BOOLEAN,
    INST_STR_CLASS,

    INST_LAPPEND_LIST,
    INST_LAPPEND_LIST_ARRAY,
    INST_LAPPEND_LIST_ARRAY_STK,
    INST_LAPPEND_LIST_STK,

    INST_CLOCK_READ,

    INST_DICT_GET_DEF,

	/* TIP 461 */
	INST_STR_LT,
	INST_STR_GT,
	INST_STR_LE,
	INST_STR_GE,

    INST_LREPLACE4,

    /* The last opcode */
    LAST_INST_OPCODE
};

/*
 * Table describing the Tcl bytecode instructions: their name (for displaying
 * code), total number of code bytes required (including operand bytes), and a
 * description of the type of each operand. These operand types include signed
 * and unsigned integers of length one and four bytes. The unsigned integers
 * are used for indexes or for, e.g., the count of objects to push in a "push"
 * instruction.
 */

#define MAX_INSTRUCTION_OPERANDS 2

typedef enum InstOperandType {
    OPERAND_NONE,
    OPERAND_INT1,		/* One byte signed integer. */
    OPERAND_INT4,		/* Four byte signed integer. */
    OPERAND_UINT1,		/* One byte unsigned integer. */
    OPERAND_UINT4,		/* Four byte unsigned integer. */
    OPERAND_IDX4,		/* Four byte signed index (actually an
				 * integer, but displayed differently.) */
    OPERAND_LVT1,		/* One byte unsigned index into the local
				 * variable table. */
    OPERAND_LVT4,		/* Four byte unsigned index into the local
				 * variable table. */
    OPERAND_AUX4,		/* Four byte unsigned index into the aux data
				 * table. */
    OPERAND_OFFSET1,		/* One byte signed jump offset. */
    OPERAND_OFFSET4,		/* Four byte signed jump offset. */
    OPERAND_LIT1,		/* One byte unsigned index into table of
				 * literals. */
    OPERAND_LIT4,		/* Four byte unsigned index into table of
				 * literals. */
    OPERAND_SCLS1		/* Index into tclStringClassTable. */
} InstOperandType;

typedef struct InstructionDesc {
    const char *name;		/* Name of instruction. */
    Tcl_Size numBytes;		/* Total number of bytes for instruction. */
    int stackEffect;		/* The worst-case balance stack effect of the
				 * instruction, used for stack requirements
				 * computations. The value INT_MIN signals
				 * that the instruction's worst case effect is
				 * (1-opnd1). */
    int numOperands;		/* Number of operands. */
    InstOperandType opTypes[MAX_INSTRUCTION_OPERANDS];
				/* The type of each operand. */
} InstructionDesc;

MODULE_SCOPE InstructionDesc const tclInstructionTable[];

/*
 * Constants used by INST_STRING_CLASS to indicate character classes. These
 * correspond closely by name with what [string is] can support, but there is
 * no requirement to keep the values the same.
 */

typedef enum InstStringClassType {
    STR_CLASS_ALNUM,		/* Unicode alphabet or digit characters. */
    STR_CLASS_ALPHA,		/* Unicode alphabet characters. */
    STR_CLASS_ASCII,		/* Characters in range U+000000..U+00007F. */
    STR_CLASS_CONTROL,		/* Unicode control characters. */
    STR_CLASS_DIGIT,		/* Unicode digit characters. */
    STR_CLASS_GRAPH,		/* Unicode printing characters, excluding
				 * space. */
    STR_CLASS_LOWER,		/* Unicode lower-case alphabet characters. */
    STR_CLASS_PRINT,		/* Unicode printing characters, including
				 * spaces. */
    STR_CLASS_PUNCT,		/* Unicode punctuation characters. */
    STR_CLASS_SPACE,		/* Unicode space characters. */
    STR_CLASS_UPPER,		/* Unicode upper-case alphabet characters. */
    STR_CLASS_WORD,		/* Unicode word (alphabetic, digit, connector
				 * punctuation) characters. */
    STR_CLASS_XDIGIT,		/* Characters that can be used as digits in
				 * hexadecimal numbers ([0-9A-Fa-f]). */
    STR_CLASS_UNICODE		/* Unicode characters. */
} InstStringClassType;

typedef struct StringClassDesc {
    char name[8];		/* Name of the class. */
    int (*comparator)(int);	/* Function to test if a single unicode
				 * character is a member of the class. */
} StringClassDesc;

MODULE_SCOPE StringClassDesc const tclStringClassTable[];

/*
 * Compilation of some Tcl constructs such as if commands and the logical or
 * (||) and logical and (&&) operators in expressions requires the generation
 * of forward jumps. Since the PC target of these jumps isn't known when the
 * jumps are emitted, we record the offset of each jump in an array of
 * JumpFixup structures. There is one array for each sequence of jumps to one
 * target PC. When we learn the target PC, we update the jumps with the
 * correct distance. Also, if the distance is too great (> 127 bytes), we
 * replace the single-byte jump with a four byte jump instruction, move the
 * instructions after the jump down, and update the code offsets for any
 * commands between the jump and the target.
 */

typedef enum {
    TCL_UNCONDITIONAL_JUMP,
    TCL_TRUE_JUMP,
    TCL_FALSE_JUMP
} TclJumpType;

typedef struct JumpFixup {
    TclJumpType jumpType;	/* Indicates the kind of jump. */
    unsigned int codeOffset;	/* Offset of the first byte of the one-byte
				 * forward jump's code. */
    int cmdIndex;		/* Index of the first command after the one
				 * for which the jump was emitted. Used to
				 * update the code offsets for subsequent
				 * commands if the two-byte jump at jumpPc
				 * must be replaced with a five-byte one. */
    int exceptIndex;		/* Index of the first range entry in the
				 * ExceptionRange array after the current one.
				 * This field is used to adjust the code
				 * offsets in subsequent ExceptionRange
				 * records when a jump is grown from 2 bytes
				 * to 5 bytes. */
} JumpFixup;

#define JUMPFIXUP_INIT_ENTRIES	10

typedef struct JumpFixupArray {
    JumpFixup *fixup;		/* Points to start of jump fixup array. */
    Tcl_Size next;			/* Index of next free array entry. */
    Tcl_Size end;			/* Index of last usable entry in array. */
    int mallocedArray;		/* 1 if array was expanded and fixups points
				 * into the heap, else 0. */
    JumpFixup staticFixupSpace[JUMPFIXUP_INIT_ENTRIES];
				/* Initial storage for jump fixup array. */
} JumpFixupArray;

/*
 * The structure describing one variable list of a foreach command. Note that
 * only foreach commands inside procedure bodies are compiled inline so a
 * ForeachVarList structure always describes local variables. Furthermore,
 * only scalar variables are supported for inline-compiled foreach loops.
 */

typedef struct ForeachVarList {
    Tcl_Size numVars;		/* The number of variables in the list. */
    Tcl_Size varIndexes[TCLFLEXARRAY];/* An array of the indexes ("slot numbers")
				 * for each variable in the procedure's array
				 * of local variables. Only scalar variables
				 * are supported. The actual size of this
				 * field will be large enough to numVars
				 * indexes. THIS MUST BE THE LAST FIELD IN THE
				 * STRUCTURE! */
} ForeachVarList;

/*
 * Structure used to hold information about a foreach command that is needed
 * during program execution. These structures are stored in CompileEnv and
 * ByteCode structures as auxiliary data.
 */

typedef struct ForeachInfo {
    Tcl_Size numLists;		/* The number of both the variable and value
				 * lists of the foreach command. */
    Tcl_Size firstValueTemp;		/* Index of the first temp var in a proc frame
				 * used to point to a value list. */
    Tcl_Size loopCtTemp;		/* Index of temp var in a proc frame holding
				 * the loop's iteration count. Used to
				 * determine next value list element to assign
				 * each loop var. */
    ForeachVarList *varLists[TCLFLEXARRAY];/* An array of pointers to ForeachVarList
				 * structures describing each var list. The
				 * actual size of this field will be large
				 * enough to numVars indexes. THIS MUST BE THE
				 * LAST FIELD IN THE STRUCTURE! */
} ForeachInfo;

/*
 * Structure used to hold information about a switch command that is needed
 * during program execution. These structures are stored in CompileEnv and
 * ByteCode structures as auxiliary data.
 */

typedef struct JumptableInfo {
    Tcl_HashTable hashTable;	/* Hash that maps strings to signed ints (PC
				 * offsets). */
} JumptableInfo;

MODULE_SCOPE const AuxDataType tclJumptableInfoType;

#define JUMPTABLEINFO(envPtr, index) \
    ((JumptableInfo*)((envPtr)->auxDataArrayPtr[TclGetUInt4AtPtr(index)].clientData))

/*
 * Structure used to hold information about a [dict update] command that is
 * needed during program execution. These structures are stored in CompileEnv
 * and ByteCode structures as auxiliary data.
 */

typedef struct {
    Tcl_Size length;		/* Size of array */
    Tcl_Size varIndices[TCLFLEXARRAY];		/* Array of variable indices to manage when
				 * processing the start and end of a [dict
				 * update]. There is really more than one
				 * entry, and the structure is allocated to
				 * take account of this. MUST BE LAST FIELD IN
				 * STRUCTURE. */
} DictUpdateInfo;

/*
 * ClientData type used by the math operator commands.
 */

typedef struct {
    const char *op;		/* Do not call it 'operator': C++ reserved */
    const char *expected;
    union {
	int numArgs;
	int identity;
    } i;
} TclOpCmdClientData;

/*
 *----------------------------------------------------------------
 * Procedures exported by tclBasic.c to be used within the engine.
 *----------------------------------------------------------------
 */

#if TCL_MAJOR_VERSION > 8
MODULE_SCOPE Tcl_ObjCmdProc	TclNRInterpCoroutine;

/*
 *----------------------------------------------------------------
 * Procedures exported by the engine to be used by tclBasic.c
 *----------------------------------------------------------------
 */

MODULE_SCOPE ByteCode *	TclCompileObj(Tcl_Interp *interp, Tcl_Obj *objPtr,
			    const CmdFrame *invoker, int word);

/*
 *----------------------------------------------------------------
 * Procedures shared among Tcl bytecode compilation and execution modules but
 * not used outside:
 *----------------------------------------------------------------
 */

MODULE_SCOPE int	TclAttemptCompileProc(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, size_t depth, Command *cmdPtr,
			    CompileEnv *envPtr);
MODULE_SCOPE void	TclCleanupStackForBreakContinue(CompileEnv *envPtr,
			    ExceptionAux *auxPtr);
MODULE_SCOPE void	TclCompileCmdWord(Tcl_Interp *interp,
			    Tcl_Token *tokenPtr, size_t count,
			    CompileEnv *envPtr);
MODULE_SCOPE void	TclCompileExpr(Tcl_Interp *interp, const char *script,
			    size_t numBytes, CompileEnv *envPtr, int optimize);
MODULE_SCOPE void	TclCompileExprWords(Tcl_Interp *interp,
			    Tcl_Token *tokenPtr, size_t numWords,
			    CompileEnv *envPtr);
MODULE_SCOPE void	TclCompileInvocation(Tcl_Interp *interp,
			    Tcl_Token *tokenPtr, Tcl_Obj *cmdObj, size_t numWords,
			    CompileEnv *envPtr);
MODULE_SCOPE void	TclCompileScript(Tcl_Interp *interp,
			    const char *script, size_t numBytes,
			    CompileEnv *envPtr);
MODULE_SCOPE void	TclCompileSyntaxError(Tcl_Interp *interp,
			    CompileEnv *envPtr);
MODULE_SCOPE void	TclCompileTokens(Tcl_Interp *interp,
			    Tcl_Token *tokenPtr, size_t count,
			    CompileEnv *envPtr);
MODULE_SCOPE void	TclCompileVarSubst(Tcl_Interp *interp,
			    Tcl_Token *tokenPtr, CompileEnv *envPtr);
MODULE_SCOPE size_t	TclCreateAuxData(void *clientData,
			    const AuxDataType *typePtr, CompileEnv *envPtr);
MODULE_SCOPE size_t	TclCreateExceptRange(ExceptionRangeType type,
			    CompileEnv *envPtr);
MODULE_SCOPE ExecEnv *	TclCreateExecEnv(Tcl_Interp *interp, size_t size);
MODULE_SCOPE Tcl_Obj *	TclCreateLiteral(Interp *iPtr, const char *bytes,
			    size_t length, TCL_HASH_TYPE hash, int *newPtr,
			    Namespace *nsPtr, int flags,
			    LiteralEntry **globalPtrPtr);
MODULE_SCOPE void	TclDeleteExecEnv(ExecEnv *eePtr);
MODULE_SCOPE void	TclDeleteLiteralTable(Tcl_Interp *interp,
			    LiteralTable *tablePtr);
MODULE_SCOPE void	TclEmitForwardJump(CompileEnv *envPtr,
			    TclJumpType jumpType, JumpFixup *jumpFixupPtr);
MODULE_SCOPE void	TclEmitInvoke(CompileEnv *envPtr, int opcode, ...);
MODULE_SCOPE ExceptionRange * TclGetExceptionRangeForPc(unsigned char *pc,
			    int catchOnly, ByteCode *codePtr);
MODULE_SCOPE void	TclExpandJumpFixupArray(JumpFixupArray *fixupArrayPtr);
MODULE_SCOPE int	TclNRExecuteByteCode(Tcl_Interp *interp,
			    ByteCode *codePtr);
MODULE_SCOPE Tcl_Obj *	TclFetchLiteral(CompileEnv *envPtr, TCL_HASH_TYPE index);
MODULE_SCOPE size_t	TclFindCompiledLocal(const char *name, size_t nameChars,
			    int create, CompileEnv *envPtr);
MODULE_SCOPE int	TclFixupForwardJump(CompileEnv *envPtr,
			    JumpFixup *jumpFixupPtr, int jumpDist,
			    int distThreshold);
MODULE_SCOPE void	TclFreeCompileEnv(CompileEnv *envPtr);
MODULE_SCOPE void	TclFreeJumpFixupArray(JumpFixupArray *fixupArrayPtr);
MODULE_SCOPE int	TclGetIndexFromToken(Tcl_Token *tokenPtr,
			    size_t before, size_t after, int *indexPtr);
MODULE_SCOPE ByteCode *	TclInitByteCode(CompileEnv *envPtr);
MODULE_SCOPE ByteCode *	TclInitByteCodeObj(Tcl_Obj *objPtr,
			    const Tcl_ObjType *typePtr, CompileEnv *envPtr);
MODULE_SCOPE void	TclInitCompileEnv(Tcl_Interp *interp,
			    CompileEnv *envPtr, const char *string,
			    size_t numBytes, const CmdFrame *invoker, int word);
MODULE_SCOPE void	TclInitJumpFixupArray(JumpFixupArray *fixupArrayPtr);
MODULE_SCOPE void	TclInitLiteralTable(LiteralTable *tablePtr);
MODULE_SCOPE ExceptionRange *TclGetInnermostExceptionRange(CompileEnv *envPtr,
			    int returnCode, ExceptionAux **auxPtrPtr);
MODULE_SCOPE void	TclAddLoopBreakFixup(CompileEnv *envPtr,
			    ExceptionAux *auxPtr);
MODULE_SCOPE void	TclAddLoopContinueFixup(CompileEnv *envPtr,
			    ExceptionAux *auxPtr);
MODULE_SCOPE void	TclFinalizeLoopExceptionRange(CompileEnv *envPtr,
			    int range);
#ifdef TCL_COMPILE_STATS
MODULE_SCOPE char *	TclLiteralStats(LiteralTable *tablePtr);
MODULE_SCOPE int	TclLog2(int value);
#endif
MODULE_SCOPE size_t	TclLocalScalar(const char *bytes, size_t numBytes,
			    CompileEnv *envPtr);
MODULE_SCOPE size_t	TclLocalScalarFromToken(Tcl_Token *tokenPtr,
			    CompileEnv *envPtr);
MODULE_SCOPE void	TclOptimizeBytecode(void *envPtr);
#ifdef TCL_COMPILE_DEBUG
MODULE_SCOPE void	TclPrintByteCodeObj(Tcl_Interp *interp,
			    Tcl_Obj *objPtr);
#endif
MODULE_SCOPE int	TclPrintInstruction(ByteCode *codePtr,
			    const unsigned char *pc);
MODULE_SCOPE void	TclPrintObject(FILE *outFile,
			    Tcl_Obj *objPtr, size_t maxChars);
MODULE_SCOPE void	TclPrintSource(FILE *outFile,
			    const char *string, size_t maxChars);
MODULE_SCOPE void	TclPushVarName(Tcl_Interp *interp,
			    Tcl_Token *varTokenPtr, CompileEnv *envPtr,
			    int flags, int *localIndexPtr,
			    int *isScalarPtr);
MODULE_SCOPE void	TclPreserveByteCode(ByteCode *codePtr);
MODULE_SCOPE void	TclReleaseByteCode(ByteCode *codePtr);
MODULE_SCOPE void	TclReleaseLiteral(Tcl_Interp *interp, Tcl_Obj *objPtr);
MODULE_SCOPE void	TclInvalidateCmdLiteral(Tcl_Interp *interp,
			    const char *name, Namespace *nsPtr);
MODULE_SCOPE Tcl_ObjCmdProc	TclSingleOpCmd;
MODULE_SCOPE Tcl_ObjCmdProc	TclSortingOpCmd;
MODULE_SCOPE Tcl_ObjCmdProc	TclVariadicOpCmd;
MODULE_SCOPE Tcl_ObjCmdProc	TclNoIdentOpCmd;
#ifdef TCL_COMPILE_DEBUG
MODULE_SCOPE void	TclVerifyGlobalLiteralTable(Interp *iPtr);
MODULE_SCOPE void	TclVerifyLocalLiteralTable(CompileEnv *envPtr);
#endif
MODULE_SCOPE int	TclWordKnownAtCompileTime(Tcl_Token *tokenPtr,
			    Tcl_Obj *valuePtr);
MODULE_SCOPE void	TclLogCommandInfo(Tcl_Interp *interp,
			    const char *script, const char *command,
			    size_t length, const unsigned char *pc,
			    Tcl_Obj **tosPtr);
MODULE_SCOPE Tcl_Obj	*TclGetInnerContext(Tcl_Interp *interp,
			    const unsigned char *pc, Tcl_Obj **tosPtr);
MODULE_SCOPE Tcl_Obj	*TclNewInstNameObj(unsigned char inst);
MODULE_SCOPE int	TclPushProcCallFrame(void *clientData,
			    Tcl_Interp *interp, size_t objc,
			    Tcl_Obj *const objv[], int isLambda);
#endif /* TCL_MAJOR_VERSION > 8 */


/*
 *----------------------------------------------------------------
 * Macros and flag values used by Tcl bytecode compilation and execution
 * modules inside the Tcl core but not used outside.
 *----------------------------------------------------------------
 */

/*
 * Simplified form to access AuxData.
 *
 * void *TclFetchAuxData(CompileEng *envPtr, int index);
 */

#define TclFetchAuxData(envPtr, index) \
    (envPtr)->auxDataArrayPtr[(index)].clientData

#define LITERAL_ON_HEAP		0x01
#define LITERAL_CMD_NAME	0x02
#define LITERAL_UNSHARED	0x04

/*
 * Macro used to manually adjust the stack requirements; used in cases where
 * the stack effect cannot be computed from the opcode and its operands, but
 * is still known at compile time.
 *
 * void TclAdjustStackDepth(int delta, CompileEnv *envPtr);
 */

#define TclAdjustStackDepth(delta, envPtr) \
    do {								\
	if ((delta) < 0) {						\
	    if ((int)(envPtr)->maxStackDepth < (int)(envPtr)->currStackDepth) {	\
		(envPtr)->maxStackDepth = (envPtr)->currStackDepth;	\
	    }								\
	}								\
	(envPtr)->currStackDepth += (delta);				\
    } while (0)

#define TclGetStackDepth(envPtr)		\
    ((envPtr)->currStackDepth)

#define TclSetStackDepth(depth, envPtr)		\
    (envPtr)->currStackDepth = (depth)

#define TclCheckStackDepth(depth, envPtr)				\
    do {								\
	size_t _dd = (depth);						\
	if (_dd != (size_t)(envPtr)->currStackDepth) {				\
	    Tcl_Panic("bad stack depth computations: is %" TCL_Z_MODIFIER "u, should be %" TCL_Z_MODIFIER "u", \
		    (size_t)(envPtr)->currStackDepth, _dd);		\
	}								\
    } while (0)

/*
 * Macro used to update the stack requirements. It is called by the macros
 * TclEmitOpCode, TclEmitInst1 and TclEmitInst4.
 * Remark that the very last instruction of a bytecode always reduces the
 * stack level: INST_DONE or INST_POP, so that the maxStackdepth is always
 * updated.
 *
 * void TclUpdateStackReqs(unsigned char op, int i, CompileEnv *envPtr);
 */

#define TclUpdateStackReqs(op, i, envPtr) \
    do {							\
	int _delta = tclInstructionTable[(op)].stackEffect;	\
	if (_delta) {						\
	    if (_delta == INT_MIN) {				\
		_delta = 1 - (i);				\
	    }							\
	    TclAdjustStackDepth(_delta, envPtr);			\
	}							\
    } while (0)

/*
 * Macros used to update the flag that indicates if we are at the start of a
 * command, based on whether the opcode is INST_START_COMMAND.
 *
 * void TclUpdateAtCmdStart(unsigned char op, CompileEnv *envPtr);
 */

#define TclUpdateAtCmdStart(op, envPtr) \
    if ((envPtr)->atCmdStart < 2) {				     \
	(envPtr)->atCmdStart = ((op) == INST_START_CMD ? 1 : 0);     \
    }

/*
 * Macro to emit an opcode byte into a CompileEnv's code array. The ANSI C
 * "prototype" for this macro is:
 *
 * void TclEmitOpcode(unsigned char op, CompileEnv *envPtr);
 */

#define TclEmitOpcode(op, envPtr) \
    do {							\
	if ((envPtr)->codeNext == (envPtr)->codeEnd) {		\
	    TclExpandCodeArray(envPtr);				\
	}							\
	*(envPtr)->codeNext++ = (unsigned char) (op);		\
	TclUpdateAtCmdStart(op, envPtr);			\
	TclUpdateStackReqs(op, 0, envPtr);			\
    } while (0)

/*
 * Macros to emit an integer operand. The ANSI C "prototype" for these macros
 * are:
 *
 * void TclEmitInt1(int i, CompileEnv *envPtr);
 * void TclEmitInt4(int i, CompileEnv *envPtr);
 */

#define TclEmitInt1(i, envPtr) \
    do {								\
	if ((envPtr)->codeNext == (envPtr)->codeEnd) {			\
	    TclExpandCodeArray(envPtr);					\
	}								\
	*(envPtr)->codeNext++ = (unsigned char) ((unsigned int) (i));	\
    } while (0)

#define TclEmitInt4(i, envPtr) \
    do {								\
	if (((envPtr)->codeNext + 4) > (envPtr)->codeEnd) {		\
	    TclExpandCodeArray(envPtr);					\
	}								\
	*(envPtr)->codeNext++ =						\
		(unsigned char) ((unsigned int) (i) >> 24);		\
	*(envPtr)->codeNext++ =						\
		(unsigned char) ((unsigned int) (i) >> 16);		\
	*(envPtr)->codeNext++ =						\
		(unsigned char) ((unsigned int) (i) >>  8);		\
	*(envPtr)->codeNext++ =						\
		(unsigned char) ((unsigned int) (i)      );		\
    } while (0)

/*
 * Macros to emit an instruction with signed or unsigned integer operands.
 * Four byte integers are stored in "big-endian" order with the high order
 * byte stored at the lowest address. The ANSI C "prototypes" for these macros
 * are:
 *
 * void TclEmitInstInt1(unsigned char op, int i, CompileEnv *envPtr);
 * void TclEmitInstInt4(unsigned char op, int i, CompileEnv *envPtr);
 */

#define TclEmitInstInt1(op, i, envPtr) \
    do {								\
	if (((envPtr)->codeNext + 2) > (envPtr)->codeEnd) {		\
	    TclExpandCodeArray(envPtr);					\
	}								\
	*(envPtr)->codeNext++ = (unsigned char) (op);			\
	*(envPtr)->codeNext++ = (unsigned char) ((unsigned int) (i));	\
	TclUpdateAtCmdStart(op, envPtr);				\
	TclUpdateStackReqs(op, i, envPtr);				\
    } while (0)

#define TclEmitInstInt4(op, i, envPtr) \
    do {							\
	if (((envPtr)->codeNext + 5) > (envPtr)->codeEnd) {	\
	    TclExpandCodeArray(envPtr);				\
	}							\
	*(envPtr)->codeNext++ = (unsigned char) (op);		\
	*(envPtr)->codeNext++ =					\
		(unsigned char) ((unsigned int) (i) >> 24);	\
	*(envPtr)->codeNext++ =					\
		(unsigned char) ((unsigned int) (i) >> 16);	\
	*(envPtr)->codeNext++ =					\
		(unsigned char) ((unsigned int) (i) >>  8);	\
	*(envPtr)->codeNext++ =					\
		(unsigned char) ((unsigned int) (i)      );	\
	TclUpdateAtCmdStart(op, envPtr);			\
	TclUpdateStackReqs(op, i, envPtr);			\
    } while (0)

/*
 * Macro to push a Tcl object onto the Tcl evaluation stack. It emits the
 * object's one or four byte array index into the CompileEnv's code array.
 * These support, respectively, a maximum of 256 (2**8) and 2**32 objects in a
 * CompileEnv. The ANSI C "prototype" for this macro is:
 *
 * void	TclEmitPush(int objIndex, CompileEnv *envPtr);
 */

#define TclEmitPush(objIndex, envPtr) \
    do {							 \
	int _objIndexCopy = (objIndex);			 \
	if (_objIndexCopy <= 255) {				 \
	    TclEmitInstInt1(INST_PUSH1, _objIndexCopy, (envPtr)); \
	} else {						 \
	    TclEmitInstInt4(INST_PUSH4, _objIndexCopy, (envPtr)); \
	}							 \
    } while (0)

/*
 * Macros to update a (signed or unsigned) integer starting at a pointer. The
 * two variants depend on the number of bytes. The ANSI C "prototypes" for
 * these macros are:
 *
 * void TclStoreInt1AtPtr(int i, unsigned char *p);
 * void TclStoreInt4AtPtr(int i, unsigned char *p);
 */

#define TclStoreInt1AtPtr(i, p) \
    *(p)   = (unsigned char) ((unsigned int) (i))

#define TclStoreInt4AtPtr(i, p) \
    do {							\
	*(p)   = (unsigned char) ((unsigned int) (i) >> 24);	\
	*(p+1) = (unsigned char) ((unsigned int) (i) >> 16);	\
	*(p+2) = (unsigned char) ((unsigned int) (i) >>  8);	\
	*(p+3) = (unsigned char) ((unsigned int) (i)      );	\
    } while (0)

/*
 * Macros to update instructions at a particular pc with a new op code and a
 * (signed or unsigned) int operand. The ANSI C "prototypes" for these macros
 * are:
 *
 * void TclUpdateInstInt1AtPc(unsigned char op, int i, unsigned char *pc);
 * void TclUpdateInstInt4AtPc(unsigned char op, int i, unsigned char *pc);
 */

#define TclUpdateInstInt1AtPc(op, i, pc) \
    do {					\
	*(pc) = (unsigned char) (op);		\
	TclStoreInt1AtPtr((i), ((pc)+1));	\
    } while (0)

#define TclUpdateInstInt4AtPc(op, i, pc) \
    do {					\
	*(pc) = (unsigned char) (op);		\
	TclStoreInt4AtPtr((i), ((pc)+1));	\
    } while (0)

/*
 * Macro to fix up a forward jump to point to the current code-generation
 * position in the bytecode being created (the most common case). The ANSI C
 * "prototypes" for this macro is:
 *
 * int TclFixupForwardJumpToHere(CompileEnv *envPtr, JumpFixup *fixupPtr,
 *				 int threshold);
 */

#define TclFixupForwardJumpToHere(envPtr, fixupPtr, threshold) \
    TclFixupForwardJump((envPtr), (fixupPtr),				\
	    (envPtr)->codeNext-(envPtr)->codeStart-(int)(fixupPtr)->codeOffset, \
	    (threshold))

/*
 * Macros to get a signed integer (GET_INT{1,2}) or an unsigned int
 * (GET_UINT{1,2}) from a pointer. There are two variants for each return type
 * that depend on the number of bytes fetched. The ANSI C "prototypes" for
 * these macros are:
 *
 * int TclGetInt1AtPtr(unsigned char *p);
 * int TclGetInt4AtPtr(unsigned char *p);
 * unsigned int TclGetUInt1AtPtr(unsigned char *p);
 * unsigned int TclGetUInt4AtPtr(unsigned char *p);
 */

/*
 * The TclGetInt1AtPtr macro is tricky because we want to do sign extension on
 * the 1-byte value. Unfortunately the "char" type isn't signed on all
 * platforms so sign-extension doesn't always happen automatically. Sometimes
 * we can explicitly declare the pointer to be signed, but other times we have
 * to explicitly sign-extend the value in software.
 */

#ifndef __CHAR_UNSIGNED__
#   define TclGetInt1AtPtr(p) ((int) *((char *) p))
#elif defined(HAVE_SIGNED_CHAR)
#   define TclGetInt1AtPtr(p) ((int) *((signed char *) p))
#else
#   define TclGetInt1AtPtr(p) \
    ((int) ((*((char *) p)) | ((*(p) & 0200) ? (-256) : 0)))
#endif

#define TclGetInt4AtPtr(p) \
    ((int) ((TclGetUInt1AtPtr(p) << 24) |			\
		       (*((p)+1) << 16) |			\
		       (*((p)+2) <<  8) |			\
		       (*((p)+3))))

#define TclGetUInt1AtPtr(p) \
    ((unsigned int) *(p))
#define TclGetUInt4AtPtr(p) \
    ((unsigned int) ((*(p)     << 24) |				\
		     (*((p)+1) << 16) |				\
		     (*((p)+2) <<  8) |				\
		     (*((p)+3))))

/*
 * Macros used to compute the minimum and maximum of two values. The ANSI C
 * "prototypes" for these macros are:
 *
 * size_t TclMin(size_t i, size_t j);
 * size_t TclMax(size_t i, size_t j);
 */

#define TclMin(i, j)	((((size_t) i) + 1 < ((size_t) j) + 1 )? (i) : (j))
#define TclMax(i, j)	((((size_t) i) + 1 > ((size_t) j) + 1 )? (i) : (j))

/*
 * Convenience macros for use when compiling bodies of commands. The ANSI C
 * "prototype" for these macros are:
 *
 * static void		BODY(Tcl_Token *tokenPtr, int word);
 */

#define BODY(tokenPtr, word)						\
    SetLineInformation((word));						\
    TclCompileCmdWord(interp, (tokenPtr)+1, (tokenPtr)->numComponents,	\
	    envPtr)

/*
 * Convenience macro for use when compiling tokens to be pushed. The ANSI C
 * "prototype" for this macro is:
 *
 * static void		CompileTokens(CompileEnv *envPtr, Tcl_Token *tokenPtr,
 *			    Tcl_Interp *interp);
 */

#define CompileTokens(envPtr, tokenPtr, interp) \
    TclCompileTokens((interp), (tokenPtr)+1, (tokenPtr)->numComponents, \
	    (envPtr));
/*
 * Convenience macros for use when pushing literals. The ANSI C "prototype" for
 * these macros are:
 *
 * static void		PushLiteral(CompileEnv *envPtr,
 *			    const char *string, Tcl_Size length);
 * static void		PushStringLiteral(CompileEnv *envPtr,
 *			    const char *string);
 */

#define PushLiteral(envPtr, string, length) \
    TclEmitPush(TclRegisterLiteral((envPtr), (string), (length), 0), (envPtr))
#define PushStringLiteral(envPtr, string) \
    PushLiteral((envPtr), (string), sizeof(string "") - 1)

/*
 * Macro to advance to the next token; it is more mnemonic than the address
 * arithmetic that it replaces. The ANSI C "prototype" for this macro is:
 *
 * static Tcl_Token *	TokenAfter(Tcl_Token *tokenPtr);
 */

#define TokenAfter(tokenPtr) \
    ((tokenPtr) + ((tokenPtr)->numComponents + 1))

/*
 * Macro to get the offset to the next instruction to be issued. The ANSI C
 * "prototype" for this macro is:
 *
 * static ptrdiff_t	CurrentOffset(CompileEnv *envPtr);
 */

#define CurrentOffset(envPtr) \
    ((envPtr)->codeNext - (envPtr)->codeStart)

/*
 * Note: the exceptDepth is a bit of a misnomer: TEBC only needs the
 * maximal depth of nested CATCH ranges in order to alloc runtime
 * memory. These macros should compute precisely that? OTOH, the nesting depth
 * of LOOP ranges is an interesting datum for debugging purposes, and that is
 * what we compute now.
 *
 * static int	ExceptionRangeStarts(CompileEnv *envPtr, Tcl_Size index);
 * static void	ExceptionRangeEnds(CompileEnv *envPtr, Tcl_Size index);
 * static void	ExceptionRangeTarget(CompileEnv *envPtr, Tcl_Size index, LABEL);
 */

#define ExceptionRangeStarts(envPtr, index) \
    (((envPtr)->exceptDepth++),						\
    ((envPtr)->maxExceptDepth =						\
	    TclMax((envPtr)->exceptDepth, (envPtr)->maxExceptDepth)),	\
    ((envPtr)->exceptArrayPtr[(index)].codeOffset = CurrentOffset(envPtr)))
#define ExceptionRangeEnds(envPtr, index) \
    (((envPtr)->exceptDepth--),						\
    ((envPtr)->exceptArrayPtr[(index)].numCodeBytes =			\
	CurrentOffset(envPtr) - (int)(envPtr)->exceptArrayPtr[(index)].codeOffset))
#define ExceptionRangeTarget(envPtr, index, targetType) \
    ((envPtr)->exceptArrayPtr[(index)].targetType = CurrentOffset(envPtr))

/*
 * Check if there is an LVT for compiled locals
 */

#define EnvHasLVT(envPtr) \
    (envPtr->procPtr || envPtr->iPtr->varFramePtr->localCachePtr)

/*
 * Macros for making it easier to deal with tokens and DStrings.
 */

#define TclDStringAppendToken(dsPtr, tokenPtr) \
    Tcl_DStringAppend((dsPtr), (tokenPtr)->start, (tokenPtr)->size)
#define TclRegisterDStringLiteral(envPtr, dsPtr) \
    TclRegisterLiteral(envPtr, Tcl_DStringValue(dsPtr), \
	    Tcl_DStringLength(dsPtr), /*flags*/ 0)

/*
 * Macro that encapsulates an efficiency trick that avoids a function call for
 * the simplest of compiles. The ANSI C "prototype" for this macro is:
 *
 * static void		CompileWord(CompileEnv *envPtr, Tcl_Token *tokenPtr,
 *			    Tcl_Interp *interp, int word);
 */

#define CompileWord(envPtr, tokenPtr, interp, word) \
    if ((tokenPtr)->type == TCL_TOKEN_SIMPLE_WORD) {			\
	PushLiteral((envPtr), (tokenPtr)[1].start, (tokenPtr)[1].size);	\
    } else {								\
	SetLineInformation((word));					\
	CompileTokens((envPtr), (tokenPtr), (interp));			\
    }

/*
 * TIP #280: Remember the per-word line information of the current command. An
 * index is used instead of a pointer as recursive compilation may reallocate,
 * i.e. move, the array. This is also the reason to save the nuloc now, it may
 * change during the course of the function.
 *
 * Macro to encapsulate the variable definition and setup.
 */

#define DefineLineInformation \
    ExtCmdLoc *mapPtr = envPtr->extCmdMapPtr;				\
    Tcl_Size eclIndex = mapPtr->nuloc - 1

#define SetLineInformation(word) \
    envPtr->line = mapPtr->loc[eclIndex].line[(word)];			\
    envPtr->clNext = mapPtr->loc[eclIndex].next[(word)]

#define PushVarNameWord(i,v,e,f,l,sc,word) \
    SetLineInformation(word);						\
    TclPushVarName(i,v,e,f,l,sc)

/*
 * Often want to issue one of two versions of an instruction based on whether
 * the argument will fit in a single byte or not. This makes it much clearer.
 */

#define Emit14Inst(nm,idx,envPtr) \
    if (idx <= 255) {							\
	TclEmitInstInt1(nm##1,idx,envPtr);				\
    } else {								\
	TclEmitInstInt4(nm##4,idx,envPtr);				\
    }

/*
 * How to get an anonymous local variable (used for holding temporary values
 * off the stack) or a local simple scalar.
 */

#define AnonymousLocal(envPtr) \
    (TclFindCompiledLocal(NULL, /*nameChars*/ 0, /*create*/ 1, (envPtr)))
#define LocalScalar(chars,len,envPtr) \
    TclLocalScalar(chars, len, envPtr)
#define LocalScalarFromToken(tokenPtr,envPtr) \
    TclLocalScalarFromToken(tokenPtr, envPtr)

/*
 * Flags bits used by TclPushVarName.
 */

#define TCL_NO_LARGE_INDEX 1	/* Do not return localIndex value > 255 */
#define TCL_NO_ELEMENT 2	/* Do not push the array element. */

/*
 * Flags bits used by lreplace4 instruction
 */
#define TCL_LREPLACE4_END_IS_LAST  1 /* "end" refers to last element */
#define TCL_LREPLACE4_SINGLE_INDEX 2 /* Second index absent (pure insert) */

/*
 * DTrace probe macros (NOPs if DTrace support is not enabled).
 */

/*
 * Define the following macros to enable debug logging of the DTrace proc,
 * cmd, and inst probes. Note that this does _not_ require a platform with
 * DTrace, it simply logs all probe output to /tmp/tclDTraceDebug-[pid].log.
 *
 * If the second macro is defined, logging to file starts immediately,
 * otherwise only after the first call to [tcl::dtrace]. Note that the debug
 * probe data is always computed, even when it is not logged to file.
 *
 * Defining the third macro enables debug logging of inst probes (disabled
 * by default due to the significant performance impact).
 */

/*
#define TCL_DTRACE_DEBUG 1
#define TCL_DTRACE_DEBUG_LOG_ENABLED 1
#define TCL_DTRACE_DEBUG_INST_PROBES 1
*/

#if !(defined(TCL_DTRACE_DEBUG) && defined(__GNUC__))

#ifdef USE_DTRACE

#if defined(__GNUC__) && __GNUC__ > 2
/*
 * Use gcc branch prediction hint to minimize cost of DTrace ENABLED checks.
 */
#define unlikely(x) (__builtin_expect((x), 0))
#else
#define unlikely(x) (x)
#endif

#define TCL_DTRACE_PROC_ENTRY_ENABLED()	    unlikely(TCL_PROC_ENTRY_ENABLED())
#define TCL_DTRACE_PROC_RETURN_ENABLED()    unlikely(TCL_PROC_RETURN_ENABLED())
#define TCL_DTRACE_PROC_RESULT_ENABLED()    unlikely(TCL_PROC_RESULT_ENABLED())
#define TCL_DTRACE_PROC_ARGS_ENABLED()	    unlikely(TCL_PROC_ARGS_ENABLED())
#define TCL_DTRACE_PROC_INFO_ENABLED()	    unlikely(TCL_PROC_INFO_ENABLED())
#define TCL_DTRACE_PROC_ENTRY(a0, a1, a2)   TCL_PROC_ENTRY(a0, a1, a2)
#define TCL_DTRACE_PROC_RETURN(a0, a1)	    TCL_PROC_RETURN(a0, a1)
#define TCL_DTRACE_PROC_RESULT(a0, a1, a2, a3) TCL_PROC_RESULT(a0, a1, a2, a3)
#define TCL_DTRACE_PROC_ARGS(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9) \
	TCL_PROC_ARGS(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9)
#define TCL_DTRACE_PROC_INFO(a0, a1, a2, a3, a4, a5, a6, a7) \
	TCL_PROC_INFO(a0, a1, a2, a3, a4, a5, a6, a7)

#define TCL_DTRACE_CMD_ENTRY_ENABLED()	    unlikely(TCL_CMD_ENTRY_ENABLED())
#define TCL_DTRACE_CMD_RETURN_ENABLED()	    unlikely(TCL_CMD_RETURN_ENABLED())
#define TCL_DTRACE_CMD_RESULT_ENABLED()	    unlikely(TCL_CMD_RESULT_ENABLED())
#define TCL_DTRACE_CMD_ARGS_ENABLED()	    unlikely(TCL_CMD_ARGS_ENABLED())
#define TCL_DTRACE_CMD_INFO_ENABLED()	    unlikely(TCL_CMD_INFO_ENABLED())
#define TCL_DTRACE_CMD_ENTRY(a0, a1, a2)    TCL_CMD_ENTRY(a0, a1, a2)
#define TCL_DTRACE_CMD_RETURN(a0, a1)	    TCL_CMD_RETURN(a0, a1)
#define TCL_DTRACE_CMD_RESULT(a0, a1, a2, a3) TCL_CMD_RESULT(a0, a1, a2, a3)
#define TCL_DTRACE_CMD_ARGS(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9) \
	TCL_CMD_ARGS(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9)
#define TCL_DTRACE_CMD_INFO(a0, a1, a2, a3, a4, a5, a6, a7) \
	TCL_CMD_INFO(a0, a1, a2, a3, a4, a5, a6, a7)

#define TCL_DTRACE_INST_START_ENABLED()	    unlikely(TCL_INST_START_ENABLED())
#define TCL_DTRACE_INST_DONE_ENABLED()	    unlikely(TCL_INST_DONE_ENABLED())
#define TCL_DTRACE_INST_START(a0, a1, a2)   TCL_INST_START(a0, a1, a2)
#define TCL_DTRACE_INST_DONE(a0, a1, a2)    TCL_INST_DONE(a0, a1, a2)

#define TCL_DTRACE_TCL_PROBE_ENABLED()	    unlikely(TCL_TCL_PROBE_ENABLED())
#define TCL_DTRACE_TCL_PROBE(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9) \
	TCL_TCL_PROBE(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9)

#define TCL_DTRACE_DEBUG_LOG()

MODULE_SCOPE void	TclDTraceInfo(Tcl_Obj *info, const char **args,
			    int *argsi);

#else /* USE_DTRACE */

#define TCL_DTRACE_PROC_ENTRY_ENABLED()	    0
#define TCL_DTRACE_PROC_RETURN_ENABLED()    0
#define TCL_DTRACE_PROC_RESULT_ENABLED()    0
#define TCL_DTRACE_PROC_ARGS_ENABLED()	    0
#define TCL_DTRACE_PROC_INFO_ENABLED()	    0
#define TCL_DTRACE_PROC_ENTRY(a0, a1, a2)   {if (a0) {}}
#define TCL_DTRACE_PROC_RETURN(a0, a1)	    {if (a0) {}}
#define TCL_DTRACE_PROC_RESULT(a0, a1, a2, a3) {if (a0) {}; if (a3) {}}
#define TCL_DTRACE_PROC_ARGS(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9) {}
#define TCL_DTRACE_PROC_INFO(a0, a1, a2, a3, a4, a5, a6, a7) {}

#define TCL_DTRACE_CMD_ENTRY_ENABLED()	    0
#define TCL_DTRACE_CMD_RETURN_ENABLED()	    0
#define TCL_DTRACE_CMD_RESULT_ENABLED()	    0
#define TCL_DTRACE_CMD_ARGS_ENABLED()	    0
#define TCL_DTRACE_CMD_INFO_ENABLED()	    0
#define TCL_DTRACE_CMD_ENTRY(a0, a1, a2)    {}
#define TCL_DTRACE_CMD_RETURN(a0, a1)	    {}
#define TCL_DTRACE_CMD_RESULT(a0, a1, a2, a3) {}
#define TCL_DTRACE_CMD_ARGS(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9) {}
#define TCL_DTRACE_CMD_INFO(a0, a1, a2, a3, a4, a5, a6, a7) {}

#define TCL_DTRACE_INST_START_ENABLED()	    0
#define TCL_DTRACE_INST_DONE_ENABLED()	    0
#define TCL_DTRACE_INST_START(a0, a1, a2)   {}
#define TCL_DTRACE_INST_DONE(a0, a1, a2)    {}

#define TCL_DTRACE_TCL_PROBE_ENABLED()	    0
#define TCL_DTRACE_TCL_PROBE(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9) {}

#define TclDTraceInfo(info, args, argsi)    {*args = ""; *argsi = 0;}

#endif /* USE_DTRACE */

#else /* TCL_DTRACE_DEBUG */

#define USE_DTRACE 1

#if !defined(TCL_DTRACE_DEBUG_LOG_ENABLED) || !(TCL_DTRACE_DEBUG_LOG_ENABLED)
#undef TCL_DTRACE_DEBUG_LOG_ENABLED
#define TCL_DTRACE_DEBUG_LOG_ENABLED 0
#endif

#if !defined(TCL_DTRACE_DEBUG_INST_PROBES) || !(TCL_DTRACE_DEBUG_INST_PROBES)
#undef TCL_DTRACE_DEBUG_INST_PROBES
#define TCL_DTRACE_DEBUG_INST_PROBES 0
#endif

MODULE_SCOPE int tclDTraceDebugEnabled, tclDTraceDebugIndent;
MODULE_SCOPE FILE *tclDTraceDebugLog;
MODULE_SCOPE void TclDTraceOpenDebugLog(void);
MODULE_SCOPE void TclDTraceInfo(Tcl_Obj *info, const char **args, int *argsi);

#define TCL_DTRACE_DEBUG_LOG() \
    int tclDTraceDebugEnabled = TCL_DTRACE_DEBUG_LOG_ENABLED;	\
    int tclDTraceDebugIndent = 0;				\
    FILE *tclDTraceDebugLog = NULL;				\
    void TclDTraceOpenDebugLog(void) {				\
	char n[35];						\
	sprintf(n, "/tmp/tclDTraceDebug-%" TCL_Z_MODIFIER "u.log", \
		(size_t) getpid());			\
	tclDTraceDebugLog = fopen(n, "a");			\
    }

#define TclDTraceDbgMsg(p, m, ...) \
    do {								\
	if (tclDTraceDebugEnabled) {					\
	    int _l, _t = 0;						\
	    if (!tclDTraceDebugLog) { TclDTraceOpenDebugLog(); }	\
	    fprintf(tclDTraceDebugLog, "%.12s:%.4d:%n",			\
		    strrchr(__FILE__, '/')+1, __LINE__, &_l); _t += _l; \
	    fprintf(tclDTraceDebugLog, " %.*s():%n",			\
		    (_t < 18 ? 18 - _t : 0) + 18, __func__, &_l); _t += _l; \
	    fprintf(tclDTraceDebugLog, "%*s" p "%n",			\
		    (_t < 40 ? 40 - _t : 0) + 2 * tclDTraceDebugIndent, \
		    "", &_l); _t += _l;					\
	    fprintf(tclDTraceDebugLog, "%*s" m "\n",			\
		    (_t < 64 ? 64 - _t : 1), "", ##__VA_ARGS__);	\
	    fflush(tclDTraceDebugLog);					\
	}								\
    } while (0)

#define TCL_DTRACE_PROC_ENTRY_ENABLED()	    1
#define TCL_DTRACE_PROC_RETURN_ENABLED()    1
#define TCL_DTRACE_PROC_RESULT_ENABLED()    1
#define TCL_DTRACE_PROC_ARGS_ENABLED()	    1
#define TCL_DTRACE_PROC_INFO_ENABLED()	    1
#define TCL_DTRACE_PROC_ENTRY(a0, a1, a2) \
	tclDTraceDebugIndent++; \
	TclDTraceDbgMsg("-> proc-entry", "%s %d %p", a0, a1, a2)
#define TCL_DTRACE_PROC_RETURN(a0, a1) \
	TclDTraceDbgMsg("<- proc-return", "%s %d", a0, a1); \
	tclDTraceDebugIndent--
#define TCL_DTRACE_PROC_RESULT(a0, a1, a2, a3) \
	TclDTraceDbgMsg(" | proc-result", "%s %d %s %p", a0, a1, a2, a3)
#define TCL_DTRACE_PROC_ARGS(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9) \
	TclDTraceDbgMsg(" | proc-args", "%s %s %s %s %s %s %s %s %s %s", a0, \
		a1, a2, a3, a4, a5, a6, a7, a8, a9)
#define TCL_DTRACE_PROC_INFO(a0, a1, a2, a3, a4, a5, a6, a7) \
	TclDTraceDbgMsg(" | proc-info", "%s %s %s %s %d %d %s %s", a0, a1, \
		a2, a3, a4, a5, a6, a7)

#define TCL_DTRACE_CMD_ENTRY_ENABLED()	    1
#define TCL_DTRACE_CMD_RETURN_ENABLED()	    1
#define TCL_DTRACE_CMD_RESULT_ENABLED()	    1
#define TCL_DTRACE_CMD_ARGS_ENABLED()	    1
#define TCL_DTRACE_CMD_INFO_ENABLED()	    1
#define TCL_DTRACE_CMD_ENTRY(a0, a1, a2) \
	tclDTraceDebugIndent++; \
	TclDTraceDbgMsg("-> cmd-entry", "%s %d %p", a0, a1, a2)
#define TCL_DTRACE_CMD_RETURN(a0, a1) \
	TclDTraceDbgMsg("<- cmd-return", "%s %d", a0, a1); \
	tclDTraceDebugIndent--
#define TCL_DTRACE_CMD_RESULT(a0, a1, a2, a3) \
	TclDTraceDbgMsg(" | cmd-result", "%s %d %s %p", a0, a1, a2, a3)
#define TCL_DTRACE_CMD_ARGS(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9) \
	TclDTraceDbgMsg(" | cmd-args", "%s %s %s %s %s %s %s %s %s %s", a0, \
		a1, a2, a3, a4, a5, a6, a7, a8, a9)
#define TCL_DTRACE_CMD_INFO(a0, a1, a2, a3, a4, a5, a6, a7) \
	TclDTraceDbgMsg(" | cmd-info", "%s %s %s %s %d %d %s %s", a0, a1, \
		a2, a3, a4, a5, a6, a7)

#define TCL_DTRACE_INST_START_ENABLED()	    TCL_DTRACE_DEBUG_INST_PROBES
#define TCL_DTRACE_INST_DONE_ENABLED()	    TCL_DTRACE_DEBUG_INST_PROBES
#define TCL_DTRACE_INST_START(a0, a1, a2) \
	TclDTraceDbgMsg(" | inst-start", "%s %d %p", a0, a1, a2)
#define TCL_DTRACE_INST_DONE(a0, a1, a2) \
	TclDTraceDbgMsg(" | inst-end", "%s %d %p", a0, a1, a2)

#define TCL_DTRACE_TCL_PROBE_ENABLED()	    1
#define TCL_DTRACE_TCL_PROBE(a0, a1, a2, a3, a4, a5, a6, a7, a8, a9) \
    do {								\
	tclDTraceDebugEnabled = 1;					\
	TclDTraceDbgMsg(" | tcl-probe", "%s %s %s %s %s %s %s %s %s %s", a0, \
		a1, a2, a3, a4, a5, a6, a7, a8, a9);			\
    } while (0)

#endif /* TCL_DTRACE_DEBUG */

#endif /* _TCLCOMPILATION */

/*
 * Local Variables:
 * mode: c
 * c-basic-offset: 4
 * fill-column: 78
 * End:
 */