path: root/generic/tclInt.h

/*
 * tclInt.h --
 *
 *	Declarations of things used internally by the Tcl interpreter.
 *
 * Copyright (c) 1987-1993 The Regents of the University of California.
 * Copyright (c) 1993-1997 Lucent Technologies.
 * Copyright (c) 1994-1998 Sun Microsystems, Inc.
 * Copyright (c) 1998-1999 by Scriptics Corporation.
 * Copyright (c) 2001, 2002 by Kevin B. Kenny.  All rights reserved.
 *
 * See the file "license.terms" for information on usage and redistribution of
 * this file, and for a DISCLAIMER OF ALL WARRANTIES.
 *
 * RCS: @(#) $Id: tclInt.h,v 1.312 2007/06/05 17:50:56 msofer Exp $
 */

#ifndef _TCLINT
#define _TCLINT

/*
 * Some numerics configuration options
 */

#undef NO_WIDE_TYPE
#undef ACCEPT_NAN

/*
 * Common include files needed by most of the Tcl source files are included
 * here, so that system-dependent personalizations for the include files only
 * have to be made in once place. This results in a few extra includes, but
 * greater modularity. The order of the three groups of #includes is
 * important. For example, stdio.h is needed by tcl.h, and the _ANSI_ARGS_
 * declaration in tcl.h is needed by stdlib.h in some configurations.
 */

#ifdef HAVE_TCL_CONFIG_H
#include "tclConfig.h"
#endif
#ifndef _TCL
#include "tcl.h"
#endif

#include <stdio.h>

#include <ctype.h>
#ifdef NO_LIMITS_H
#   include "../compat/limits.h"
#else
#   include <limits.h>
#endif
#ifdef NO_STDLIB_H
#   include "../compat/stdlib.h"
#else
#   include <stdlib.h>
#endif
#ifdef NO_STRING_H
#include "../compat/string.h"
#else
#include <string.h>
#endif
#ifdef STDC_HEADERS
#include <stddef.h>
#else
typedef int ptrdiff_t;
#endif

/*
 * Ensure WORDS_BIGENDIAN is defined correcly:
 * Needs to happen here in addition to configure to work with fat compiles on
 * Darwin (where configure runs only once for multiple architectures).
 */

#ifdef HAVE_SYS_TYPES_H
#    include <sys/types.h>
#endif
#ifdef HAVE_SYS_PARAM_H
#    include <sys/param.h>
#endif
#ifdef BYTE_ORDER
#    ifdef BIG_ENDIAN
#	 if BYTE_ORDER == BIG_ENDIAN
#	     undef WORDS_BIGENDIAN
#	     define WORDS_BIGENDIAN
#	 endif
#    endif
#    ifdef LITTLE_ENDIAN
#	 if BYTE_ORDER == LITTLE_ENDIAN
#	     undef WORDS_BIGENDIAN
#	 endif
#    endif
#endif

/*
 * Used to tag functions that are only to be visible within the module being
 * built and not outside it (where this is supported by the linker).
 */

#ifndef MODULE_SCOPE
#   ifdef __cplusplus
#	define MODULE_SCOPE extern "C"
#   else
#	define MODULE_SCOPE extern
#   endif
#endif

/*
 * When Tcl_WideInt and long are the same type, there's no value in
 * having a tclWideIntType separate from the tclIntType.
 */
#ifdef TCL_WIDE_INT_IS_LONG
#define NO_WIDE_TYPE
#endif

/*
 * Macros used to cast between pointers and integers (e.g. when storing an int
 * in ClientData), on 64-bit architectures they avoid gcc warning about "cast
 * to/from pointer from/to integer of different size".
 */

#if !defined(INT2PTR) && !defined(PTR2INT)
#   if defined(HAVE_INTPTR_T) || defined(intptr_t)	
#	define INT2PTR(p) ((void*)(intptr_t)(p))
#	define PTR2INT(p) ((int)(intptr_t)(p))
#   else
#	define INT2PTR(p) ((void*)(p))
#	define PTR2INT(p) ((int)(p))
#   endif
#endif
#if !defined(UINT2PTR) && !defined(PTR2UINT)
#   if defined(HAVE_UINTPTR_T) || defined(uintptr_t)
#	define UINT2PTR(p) ((void*)(uintptr_t)(p))
#	define PTR2UINT(p) ((unsigned int)(uintptr_t)(p))
#   else
#	define UINT2PTR(p) ((void*)(p))
#	define PTR2UINT(p) ((unsigned int)(p))
#   endif
#endif

/*
 * The following procedures allow namespaces to be customized to support
 * special name resolution rules for commands/variables.
 */

struct Tcl_ResolvedVarInfo;

typedef Tcl_Var (Tcl_ResolveRuntimeVarProc)(Tcl_Interp *interp,
	struct Tcl_ResolvedVarInfo *vinfoPtr);

typedef void (Tcl_ResolveVarDeleteProc)(struct Tcl_ResolvedVarInfo *vinfoPtr);

/*
 * The following structure encapsulates the routines needed to resolve a
 * variable reference at runtime. Any variable specific state will typically
 * be appended to this structure.
 */

typedef struct Tcl_ResolvedVarInfo {
    Tcl_ResolveRuntimeVarProc *fetchProc;
    Tcl_ResolveVarDeleteProc *deleteProc;
} Tcl_ResolvedVarInfo;

typedef int (Tcl_ResolveCompiledVarProc) (Tcl_Interp *interp,
	CONST84 char *name, int length, Tcl_Namespace *context,
	Tcl_ResolvedVarInfo **rPtr);

typedef int (Tcl_ResolveVarProc) (Tcl_Interp *interp, CONST84 char *name,
	Tcl_Namespace *context, int flags, Tcl_Var *rPtr);

typedef int (Tcl_ResolveCmdProc) (Tcl_Interp *interp, CONST84 char *name,
	Tcl_Namespace *context, int flags, Tcl_Command *rPtr);

typedef struct Tcl_ResolverInfo {
    Tcl_ResolveCmdProc *cmdResProc;	/* Procedure handling command name
					 * resolution. */
    Tcl_ResolveVarProc *varResProc;	/* Procedure handling variable name
					 * resolution for variables that
					 * can only be handled at runtime. */
    Tcl_ResolveCompiledVarProc *compiledVarResProc;
					/* Procedure handling variable name
					 * resolution at compile time. */
} Tcl_ResolverInfo;

/*
 *----------------------------------------------------------------
 * Data structures related to namespaces.
 *----------------------------------------------------------------
 */

typedef struct Tcl_Ensemble Tcl_Ensemble;
typedef struct NamespacePathEntry NamespacePathEntry;

/*
 * The structure below defines a namespace.
 * Note: the first five fields must match exactly the fields in a
 * Tcl_Namespace structure (see tcl.h). If you change one, be sure to change
 * the other.
 */

typedef struct Namespace {
    char *name;			/* The namespace's simple (unqualified) name.
				 * This contains no ::'s. The name of the
				 * global namespace is "" although "::" is an
				 * synonym. */
    char *fullName;		/* The namespace's fully qualified name. This
				 * starts with ::. */
    ClientData clientData;	/* An arbitrary value associated with this
				 * namespace. */
    Tcl_NamespaceDeleteProc *deleteProc;
				/* Procedure invoked when deleting the
				 * namespace to, e.g., free clientData. */
    struct Namespace *parentPtr;/* Points to the namespace that contains this
				 * one. NULL if this is the global
				 * namespace. */
    Tcl_HashTable childTable;	/* Contains any child namespaces. Indexed by
				 * strings; values have type (Namespace *). */
    long nsId;			/* Unique id for the namespace. */
    Tcl_Interp *interp;		/* The interpreter containing this
				 * namespace. */
    int flags;			/* OR-ed combination of the namespace status
				 * flags NS_DYING and NS_DEAD listed below. */
    int activationCount;	/* Number of "activations" or active call
				 * frames for this namespace that are on the
				 * Tcl call stack. The namespace won't be
				 * freed until activationCount becomes zero. */
    int refCount;		/* Count of references by namespaceName
				 * objects. The namespace can't be freed until
				 * refCount becomes zero. */
    Tcl_HashTable cmdTable;	/* Contains all the commands currently
				 * registered in the namespace. Indexed by
				 * strings; values have type (Command *).
				 * Commands imported by Tcl_Import have
				 * Command structures that point (via an
				 * ImportedCmdRef structure) to the Command
				 * structure in the source namespace's command
				 * table. */
    Tcl_HashTable varTable;	/* Contains all the (global) variables
				 * currently in this namespace. Indexed by
				 * strings; values have type (Var *). */
    char **exportArrayPtr;	/* Points to an array of string patterns
				 * specifying which commands are exported. A
				 * pattern may include "string match" style
				 * wildcard characters to specify multiple
				 * commands; however, no namespace qualifiers
				 * are allowed. NULL if no export patterns are
				 * registered. */
    int numExportPatterns;	/* Number of export patterns currently
				 * registered using "namespace export". */
    int maxExportPatterns;	/* Mumber of export patterns for which space
				 * is currently allocated. */
    int cmdRefEpoch;		/* Incremented if a newly added command
				 * shadows a command for which this namespace
				 * has already cached a Command * pointer;
				 * this causes all its cached Command*
				 * pointers to be invalidated. */
    int resolverEpoch;		/* Incremented whenever (a) the name
				 * resolution rules change for this namespace
				 * or (b) a newly added command shadows a
				 * command that is compiled to bytecodes. This
				 * invalidates all byte codes compiled in the
				 * namespace, causing the code to be
				 * recompiled under the new rules.*/
    Tcl_ResolveCmdProc *cmdResProc;
				/* If non-null, this procedure overrides the
				 * usual command resolution mechanism in Tcl.
				 * This procedure is invoked within
				 * Tcl_FindCommand to resolve all command
				 * references within the namespace. */
    Tcl_ResolveVarProc *varResProc;
				/* If non-null, this procedure overrides the
				 * usual variable resolution mechanism in Tcl.
				 * This procedure is invoked within
				 * Tcl_FindNamespaceVar to resolve all
				 * variable references within the namespace at
				 * runtime. */
    Tcl_ResolveCompiledVarProc *compiledVarResProc;
				/* If non-null, this procedure overrides the
				 * usual variable resolution mechanism in Tcl.
				 * This procedure is invoked within
				 * LookupCompiledLocal to resolve variable
				 * references within the namespace at compile
				 * time. */
    int exportLookupEpoch;	/* Incremented whenever a command is added to
				 * a namespace, removed from a namespace or
				 * the exports of a namespace are changed.
				 * Allows TIP#112-driven command lists to be
				 * validated efficiently. */
    Tcl_Ensemble *ensembles;	/* List of structures that contain the details
				 * of the ensembles that are implemented on
				 * top of this namespace. */
    Tcl_Obj *unknownHandlerPtr;	/* A script fragment to be used when command
				 * resolution in this namespace fails. TIP
				 * 181. */
    int commandPathLength;	/* The length of the explicit path. */
    NamespacePathEntry *commandPathArray;
				/* The explicit path of the namespace as an
				 * array. */
    NamespacePathEntry *commandPathSourceList;
				/* Linked list of path entries that point to
				 * this namespace. */
} Namespace;

/*
 * An entry on a namespace's command resolution path.
 */

struct NamespacePathEntry {
    Namespace *nsPtr;		/* What does this path entry point to? If it
				 * is NULL, this path entry points is
				 * redundant and should be skipped. */
    Namespace *creatorNsPtr;	/* Where does this path entry point from? This
				 * allows for efficient invalidation of
				 * references when the path entry's target
				 * updates its current list of defined
				 * commands. */
    NamespacePathEntry *prevPtr, *nextPtr;
				/* Linked list pointers or NULL at either end
				 * of the list that hangs off Namespace's
				 * commandPathSourceList field. */
};

/*
 * Flags used to represent the status of a namespace:
 *
 * NS_DYING -	1 means Tcl_DeleteNamespace has been called to delete the
 *		namespace but there are still active call frames on the Tcl
 *		stack that refer to the namespace. When the last call frame
 *		referring to it has been popped, it's variables and command
 *		will be destroyed and it will be marked "dead" (NS_DEAD). The
 *		namespace can no longer be looked up by name.
 * NS_DEAD -	1 means Tcl_DeleteNamespace has been called to delete the
 *		namespace and no call frames still refer to it. Its variables
 *		and command have already been destroyed. This bit allows the
 *		namespace resolution code to recognize that the namespace is
 *		"deleted". When the last namespaceName object in any byte code
 *		unit that refers to the namespace has been freed (i.e., when
 *		the namespace's refCount is 0), the namespace's storage will
 *		be freed.
 * NS_KILLED    1 means that TclTeardownNamespace has already been called on
 *              this namespace and it should not be called again [Bug 1355942]
 */

#define NS_DYING	0x01
#define NS_DEAD		0x02
#define NS_KILLED       0x04

/*
 * Flags passed to TclGetNamespaceForQualName:
 *
 * TCL_GLOBAL_ONLY		- (see tcl.h) Look only in the global ns. 
 * TCL_NAMESPACE_ONLY		- (see tcl.h) Look only in the context ns.
 * TCL_CREATE_NS_IF_UNKNOWN	- Create unknown namespaces.
 * TCL_FIND_ONLY_NS		- The name sought is a namespace name.
 */

#define TCL_CREATE_NS_IF_UNKNOWN	0x800
#define TCL_FIND_ONLY_NS		0x1000

/*
 *----------------------------------------------------------------
 * Data structures related to variables. These are used primarily in tclVar.c
 *----------------------------------------------------------------
 */

/*
 * The following structure defines a variable trace, which is used to invoke a
 * specific C procedure whenever certain operations are performed on a
 * variable.
 */

typedef struct VarTrace {
    Tcl_VarTraceProc *traceProc;/* Procedure to call when operations given by
				 * flags are performed on variable. */
    ClientData clientData;	/* Argument to pass to proc. */
    int flags;			/* What events the trace procedure is
				 * interested in: OR-ed combination of
				 * TCL_TRACE_READS, TCL_TRACE_WRITES,
				 * TCL_TRACE_UNSETS and TCL_TRACE_ARRAY. */
    struct VarTrace *nextPtr;	/* Next in list of traces associated with a
				 * particular variable. */
} VarTrace;

/*
 * The following structure defines a command trace, which is used to invoke a
 * specific C procedure whenever certain operations are performed on a
 * command.
 */

typedef struct CommandTrace {
    Tcl_CommandTraceProc *traceProc;
				/* Procedure to call when operations given by
				 * flags are performed on command. */
    ClientData clientData;	/* Argument to pass to proc. */
    int flags;			/* What events the trace procedure is
				 * interested in: OR-ed combination of
				 * TCL_TRACE_RENAME, TCL_TRACE_DELETE. */
    struct CommandTrace *nextPtr;
				/* Next in list of traces associated with a
				 * particular command. */
    int refCount;		/* Used to ensure this structure is not
				 * deleted too early. Keeps track of how many
				 * pieces of code have a pointer to this
				 * structure. */
} CommandTrace;

/*
 * When a command trace is active (i.e. its associated procedure is executing)
 * one of the following structures is linked into a list associated with the
 * command's interpreter. The information in the structure is needed in order
 * for Tcl to behave reasonably if traces are deleted while traces are active.
 */

typedef struct ActiveCommandTrace {
    struct Command *cmdPtr;	/* Command that's being traced. */
    struct ActiveCommandTrace *nextPtr;
				/* Next in list of all active command traces
				 * for the interpreter, or NULL if no more. */
    CommandTrace *nextTracePtr;	/* Next trace to check after current trace
				 * procedure returns; if this trace gets
				 * deleted, must update pointer to avoid using
				 * free'd memory. */
    int reverseScan;		/* Boolean set true when traces are scanning
				 * in reverse order. */
} ActiveCommandTrace;

/*
 * When a variable trace is active (i.e. its associated procedure is
 * executing) one of the following structures is linked into a list associated
 * with the variable's interpreter. The information in the structure is needed
 * in order for Tcl to behave reasonably if traces are deleted while traces
 * are active.
 */

typedef struct ActiveVarTrace {
    struct Var *varPtr;		/* Variable that's being traced. */
    struct ActiveVarTrace *nextPtr;
				/* Next in list of all active variable traces
				 * for the interpreter, or NULL if no more. */
    VarTrace *nextTracePtr;	/* Next trace to check after current trace
				 * procedure returns; if this trace gets
				 * deleted, must update pointer to avoid using
				 * free'd memory. */
} ActiveVarTrace;

/*
 * The following structure describes an enumerative search in progress on an
 * array variable; this are invoked with options to the "array" command.
 */

typedef struct ArraySearch {
    int id;			/* Integer id used to distinguish among
				 * multiple concurrent searches for the same
				 * array. */
    struct Var *varPtr;		/* Pointer to array variable that's being
				 * searched. */
    Tcl_HashSearch search;	/* Info kept by the hash module about progress
				 * through the array. */
    Tcl_HashEntry *nextEntry;	/* Non-null means this is the next element to
				 * be enumerated (it's leftover from the
				 * Tcl_FirstHashEntry call or from an "array
				 * anymore" command). NULL means must call
				 * Tcl_NextHashEntry to get value to
				 * return. */
    struct ArraySearch *nextPtr;/* Next in list of all active searches for
				 * this variable, or NULL if this is the last
				 * one. */
} ArraySearch;

/*
 * The structure below defines a variable, which associates a string name with
 * a Tcl_Obj value. These structures are kept in procedure call frames (for
 * local variables recognized by the compiler) or in the heap (for global
 * variables and any variable not known to the compiler). For each Var
 * structure in the heap, a hash table entry holds the variable name and a
 * pointer to the Var structure.
 */

typedef struct Var {
    union {
	Tcl_Obj *objPtr;	/* The variable's object value. Used for
				 * scalar variables and array elements. */
	Tcl_HashTable *tablePtr;/* For array variables, this points to
				 * information about the hash table used to
				 * implement the associative array. Points to
				 * ckalloc-ed data. */
	struct Var *linkPtr;	/* If this is a global variable being referred
				 * to in a procedure, or a variable created by
				 * "upvar", this field points to the
				 * referenced variable's Var struct. */
    } value;
    char *name;			/* NULL if the variable is in a hashtable,
				 * otherwise points to the variable's name. It
				 * is used, e.g., by TclLookupVar and "info
				 * locals". The storage for the characters of
				 * the name is not owned by the Var and must
				 * not be freed when freeing the Var. */
    Namespace *nsPtr;		/* Points to the namespace that contains this
				 * variable or NULL if the variable is a local
				 * variable in a Tcl procedure. */
    Tcl_HashEntry *hPtr;	/* If variable is in a hashtable, either the
				 * hash table entry that refers to this
				 * variable or NULL if the variable has been
				 * detached from its hash table (e.g. an array
				 * is deleted, but some of its elements are
				 * still referred to in upvars). NULL if the
				 * variable is not in a hashtable. This is
				 * used to delete an variable from its
				 * hashtable if it is no longer needed. */
    int refCount;		/* Counts number of active uses of this
				 * variable, not including its entry in the
				 * call frame or the hash table: 1 for each
				 * additional variable whose linkPtr points
				 * here, 1 for each nested trace active on
				 * variable, and 1 if the variable is a
				 * namespace variable. This record can't be
				 * deleted until refCount becomes 0. */
    VarTrace *tracePtr;		/* First in list of all traces set for this
				 * variable. */
    ArraySearch *searchPtr;	/* First in list of all searches active for
				 * this variable, or NULL if none. */
    int flags;			/* Miscellaneous bits of information about
				 * variable. See below for definitions. */
} Var;

/*
 * Flag bits for variables. The first three (VAR_SCALAR, VAR_ARRAY, and
 * VAR_LINK) are mutually exclusive and give the "type" of the variable.
 * VAR_UNDEFINED is independent of the variable's type.
 *
 * VAR_SCALAR -			1 means this is a scalar variable and not an
 *				array or link. The "objPtr" field points to
 *				the variable's value, a Tcl object.
 * VAR_ARRAY -			1 means this is an array variable rather than
 *				a scalar variable or link. The "tablePtr"
 *				field points to the array's hashtable for its
 *				elements.
 * VAR_LINK -			1 means this Var structure contains a pointer
 *				to another Var structure that either has the
 *				real value or is itself another VAR_LINK
 *				pointer. Variables like this come about
 *				through "upvar" and "global" commands, or
 *				through references to variables in enclosing
 *				namespaces.
 * VAR_UNDEFINED -		1 means that the variable is in the process of
 *				being deleted. An undefined variable logically
 *				does not exist and survives only while it has
 *				a trace, or if it is a global variable
 *				currently being used by some procedure.
 * VAR_IN_HASHTABLE -		1 means this variable is in a hashtable and
 *				the Var structure is malloced. 0 if it is a
 *				local variable that was assigned a slot in a
 *				procedure frame by the compiler so the Var
 *				storage is part of the call frame.
 * VAR_TRACE_ACTIVE -		1 means that trace processing is currently
 *				underway for a read or write access, so new
 *				read or write accesses should not cause trace
 *				procedures to be called and the variable can't
 *				be deleted.
 * VAR_ARRAY_ELEMENT -		1 means that this variable is an array
 *				element, so it is not legal for it to be an
 *				array itself (the VAR_ARRAY flag had better
 *				not be set).
 * VAR_NAMESPACE_VAR -		1 means that this variable was declared as a
 *				namespace variable. This flag ensures it
 *				persists until its namespace is destroyed or
 *				until the variable is unset; it will persist
 *				even if it has not been initialized and is
 *				marked undefined. The variable's refCount is
 *				incremented to reflect the "reference" from
 *				its namespace.
 *
 * The following additional flags are used with the CompiledLocal type defined
 * below:
 *
 * VAR_ARGUMENT -		1 means that this variable holds a procedure
 *				argument.
 * VAR_TEMPORARY -		1 if the local variable is an anonymous
 *				temporary variable. Temporaries have a NULL
 *				name.
 * VAR_RESOLVED -		1 if name resolution has been done for this
 *				variable.
 */

#define VAR_SCALAR		0x1
#define VAR_ARRAY		0x2
#define VAR_LINK		0x4
#define VAR_UNDEFINED		0x8
#define VAR_IN_HASHTABLE	0x10
#define VAR_TRACE_ACTIVE	0x20
#define VAR_ARRAY_ELEMENT	0x40
#define VAR_NAMESPACE_VAR	0x80

#define VAR_ARGUMENT		0x100
#define VAR_TEMPORARY		0x200
#define VAR_RESOLVED		0x400
#define VAR_IS_ARGS		0x800

/*
 * Macros to ensure that various flag bits are set properly for variables.
 * The ANSI C "prototypes" for these macros are:
 *
 * MODULE_SCOPE void	TclSetVarScalar(Var *varPtr);
 * MODULE_SCOPE void	TclSetVarArray(Var *varPtr);
 * MODULE_SCOPE void	TclSetVarLink(Var *varPtr);
 * MODULE_SCOPE void	TclSetVarArrayElement(Var *varPtr);
 * MODULE_SCOPE void	TclSetVarUndefined(Var *varPtr);
 * MODULE_SCOPE void	TclClearVarUndefined(Var *varPtr);
 */

#define TclSetVarScalar(varPtr) \
    (varPtr)->flags = ((varPtr)->flags & ~(VAR_ARRAY|VAR_LINK)) | VAR_SCALAR

#define TclSetVarArray(varPtr) \
    (varPtr)->flags = ((varPtr)->flags & ~(VAR_SCALAR|VAR_LINK)) | VAR_ARRAY

#define TclSetVarLink(varPtr) \
    (varPtr)->flags = ((varPtr)->flags & ~(VAR_SCALAR|VAR_ARRAY)) | VAR_LINK

#define TclSetVarArrayElement(varPtr) \
    (varPtr)->flags = ((varPtr)->flags & ~VAR_ARRAY) | VAR_ARRAY_ELEMENT

#define TclSetVarUndefined(varPtr) \
    (varPtr)->flags |= VAR_UNDEFINED

#define TclClearVarUndefined(varPtr) \
    (varPtr)->flags &= ~VAR_UNDEFINED

#define TclSetVarTraceActive(varPtr) \
    (varPtr)->flags |= VAR_TRACE_ACTIVE

#define TclClearVarTraceActive(varPtr) \
    (varPtr)->flags &= ~VAR_TRACE_ACTIVE

#define TclSetVarNamespaceVar(varPtr) \
    (varPtr)->flags |= VAR_NAMESPACE_VAR

#define TclClearVarNamespaceVar(varPtr) \
    (varPtr)->flags &= ~VAR_NAMESPACE_VAR

/*
 * Macros to read various flag bits of variables.
 * The ANSI C "prototypes" for these macros are:
 *
 * MODULE_SCOPE int	TclIsVarScalar(Var *varPtr);
 * MODULE_SCOPE int	TclIsVarLink(Var *varPtr);
 * MODULE_SCOPE int	TclIsVarArray(Var *varPtr);
 * MODULE_SCOPE int	TclIsVarUndefined(Var *varPtr);
 * MODULE_SCOPE int	TclIsVarArrayElement(Var *varPtr);
 * MODULE_SCOPE int	TclIsVarTemporary(Var *varPtr);
 * MODULE_SCOPE int	TclIsVarArgument(Var *varPtr);
 * MODULE_SCOPE int	TclIsVarResolved(Var *varPtr);
 */

#define TclIsVarScalar(varPtr) \
    ((varPtr)->flags & VAR_SCALAR)

#define TclIsVarLink(varPtr) \
    ((varPtr)->flags & VAR_LINK)

#define TclIsVarArray(varPtr) \
    ((varPtr)->flags & VAR_ARRAY)

#define TclIsVarUndefined(varPtr) \
    ((varPtr)->flags & VAR_UNDEFINED)

#define TclIsVarArrayElement(varPtr) \
    ((varPtr)->flags & VAR_ARRAY_ELEMENT)

#define TclIsVarNamespaceVar(varPtr) \
    ((varPtr)->flags & VAR_NAMESPACE_VAR)

#define TclIsVarTemporary(varPtr) \
    ((varPtr)->flags & VAR_TEMPORARY)

#define TclIsVarArgument(varPtr) \
    ((varPtr)->flags & VAR_ARGUMENT)

#define TclIsVarResolved(varPtr) \
    ((varPtr)->flags & VAR_RESOLVED)

#define TclIsVarTraceActive(varPtr) \
    ((varPtr)->flags & VAR_TRACE_ACTIVE)

#define TclIsVarUntraced(varPtr) \
    ((varPtr)->tracePtr == NULL)

/*
 * Macros for direct variable access by TEBC
 */

#define TclIsVarDirectReadable(varPtr) \
	(TclIsVarScalar(varPtr) \
    && !TclIsVarUndefined(varPtr) \
    && TclIsVarUntraced(varPtr))

#define TclIsVarDirectWritable(varPtr) \
    (   !(((varPtr)->flags & VAR_IN_HASHTABLE) \
		&& ((varPtr)->hPtr == NULL)) \
     && TclIsVarUntraced(varPtr) \
     && (TclIsVarScalar(varPtr) \
	     || TclIsVarUndefined(varPtr)))

/*
 *----------------------------------------------------------------
 * Data structures related to procedures. These are used primarily in
 * tclProc.c, tclCompile.c, and tclExecute.c.
 *----------------------------------------------------------------
 */

/*
 * Forward declaration to prevent an error when the forward reference to
 * Command is encountered in the Proc and ImportRef types declared below.
 */

struct Command;

/*
 * The variable-length structure below describes a local variable of a
 * procedure that was recognized by the compiler. These variables have a name,
 * an element in the array of compiler-assigned local variables in the
 * procedure's call frame, and various other items of information. If the
 * local variable is a formal argument, it may also have a default value. The
 * compiler can't recognize local variables whose names are expressions (these
 * names are only known at runtime when the expressions are evaluated) or
 * local variables that are created as a result of an "upvar" or "uplevel"
 * command. These other local variables are kept separately in a hash table in
 * the call frame.
 */

typedef struct CompiledLocal {
    struct CompiledLocal *nextPtr;
				/* Next compiler-recognized local variable for
				 * this procedure, or NULL if this is the last
				 * local. */
    int nameLength;		/* The number of characters in local
				 * variable's name. Used to speed up variable
				 * lookups. */
    int frameIndex;		/* Index in the array of compiler-assigned
				 * variables in the procedure call frame. */
    int flags;			/* Flag bits for the local variable. Same as
				 * the flags for the Var structure above,
				 * although only VAR_SCALAR, VAR_ARRAY,
				 * VAR_LINK, VAR_ARGUMENT, VAR_TEMPORARY, and
				 * VAR_RESOLVED make sense. */
    Tcl_Obj *defValuePtr;	/* Pointer to the default value of an
				 * argument, if any. NULL if not an argument
				 * or, if an argument, no default value. */
    Tcl_ResolvedVarInfo *resolveInfo;
				/* Customized variable resolution info
				 * supplied by the Tcl_ResolveCompiledVarProc
				 * associated with a namespace. Each variable
				 * is marked by a unique ClientData tag during
				 * compilation, and that same tag is used to
				 * find the variable at runtime. */
    char name[4];		/* Name of the local variable starts here. If
				 * the name is NULL, this will just be '\0'.
				 * The actual size of this field will be large
				 * enough to hold the name. MUST BE THE LAST
				 * FIELD IN THE STRUCTURE! */
} CompiledLocal;

/*
 * The structure below defines a command procedure, which consists of a
 * collection of Tcl commands plus information about arguments and other local
 * variables recognized at compile time.
 */

typedef struct Proc {
    struct Interp *iPtr;	/* Interpreter for which this command is
				 * defined. */
    int refCount;		/* Reference count: 1 if still present in
				 * command table plus 1 for each call to the
				 * procedure that is currently active. This
				 * structure can be freed when refCount
				 * becomes zero. */
    struct Command *cmdPtr;	/* Points to the Command structure for this
				 * procedure. This is used to get the
				 * namespace in which to execute the
				 * procedure. */
    Tcl_Obj *bodyPtr;		/* Points to the ByteCode object for
				 * procedure's body command. */
    int numArgs;		/* Number of formal parameters. */
    int numCompiledLocals;	/* Count of local variables recognized by the
				 * compiler including arguments and
				 * temporaries. */
    CompiledLocal *firstLocalPtr;
				/* Pointer to first of the procedure's
				 * compiler-allocated local variables, or NULL
				 * if none. The first numArgs entries in this
				 * list describe the procedure's formal
				 * arguments. */
    CompiledLocal *lastLocalPtr;/* Pointer to the last allocated local
				 * variable or NULL if none. This has frame
				 * index (numCompiledLocals-1). */
} Proc;

/*
 * The type of functions called to process errors found during the execution
 * of a procedure (or lambda term or ...).
 */

typedef void (*ProcErrorProc)(Tcl_Interp *interp, Tcl_Obj *procNameObj);

/*
 * The structure below defines a command trace. This is used to allow Tcl
 * clients to find out whenever a command is about to be executed.
 */

typedef struct Trace {
    int level;			/* Only trace commands at nesting level less
				 * than or equal to this. */
    Tcl_CmdObjTraceProc *proc;	/* Procedure to call to trace command. */
    ClientData clientData;	/* Arbitrary value to pass to proc. */
    struct Trace *nextPtr;	/* Next in list of traces for this interp. */
    int flags;			/* Flags governing the trace - see
				 * Tcl_CreateObjTrace for details */
    Tcl_CmdObjTraceDeleteProc* delProc;
				/* Procedure to call when trace is deleted */
} Trace;

/*
 * When an interpreter trace is active (i.e. its associated procedure is
 * executing), one of the following structures is linked into a list
 * associated with the interpreter. The information in the structure is needed
 * in order for Tcl to behave reasonably if traces are deleted while traces
 * are active.
 */

typedef struct ActiveInterpTrace {
    struct ActiveInterpTrace *nextPtr;
				/* Next in list of all active command traces
				 * for the interpreter, or NULL if no more. */
    Trace *nextTracePtr;	/* Next trace to check after current trace
				 * procedure returns; if this trace gets
				 * deleted, must update pointer to avoid using
				 * free'd memory. */
    int reverseScan;		/* Boolean set true when traces are scanning
				 * in reverse order. */
} ActiveInterpTrace;

/*
 * Flag values designating types of execution traces. See tclTrace.c for
 * related flag values.
 *
 * TCL_TRACE_ENTER_EXEC		- triggers enter/enterstep traces.
 * 				- passed to Tcl_CreateObjTrace to set up
 *				  "enterstep" traces.
 * TCL_TRACE_LEAVE_EXEC		- triggers leave/leavestep traces.
 * 				- passed to Tcl_CreateObjTrace to set up
 *				  "leavestep" traces.
 *
 */
#define TCL_TRACE_ENTER_EXEC	1
#define TCL_TRACE_LEAVE_EXEC	2

/*
 * The structure below defines an entry in the assocData hash table which is
 * associated with an interpreter. The entry contains a pointer to a function
 * to call when the interpreter is deleted, and a pointer to a user-defined
 * piece of data.
 */

typedef struct AssocData {
    Tcl_InterpDeleteProc *proc;	/* Proc to call when deleting. */
    ClientData clientData;	/* Value to pass to proc. */
} AssocData;

/*
 * The structure below defines a call frame. A call frame defines a naming
 * context for a procedure call: its local naming scope (for local variables)
 * and its global naming scope (a namespace, perhaps the global :: namespace).
 * A call frame can also define the naming context for a namespace eval or
 * namespace inscope command: the namespace in which the command's code should
 * execute. The Tcl_CallFrame structures exist only while procedures or
 * namespace eval/inscope's are being executed, and provide a kind of Tcl call
 * stack.
 *
 * WARNING!! The structure definition must be kept consistent with the
 * Tcl_CallFrame structure in tcl.h. If you change one, change the other.
 */

typedef struct CallFrame {
    Namespace *nsPtr;		/* Points to the namespace used to resolve
				 * commands and global variables. */
    int isProcCallFrame;	/* If 0, the frame was pushed to execute a
				 * namespace command and var references are
				 * treated as references to namespace vars;
				 * varTablePtr and compiledLocals are ignored.
				 * If FRAME_IS_PROC is set, the frame was
				 * pushed to execute a Tcl procedure and may
				 * have local vars. */
    int objc;			/* This and objv below describe the arguments
				 * for this procedure call. */
    Tcl_Obj *CONST *objv;	/* Array of argument objects. */
    struct CallFrame *callerPtr;
				/* Value of interp->framePtr when this
				 * procedure was invoked (i.e. next higher in
				 * stack of all active procedures). */
    struct CallFrame *callerVarPtr;
				/* Value of interp->varFramePtr when this
				 * procedure was invoked (i.e. determines
				 * variable scoping within caller). Same as
				 * callerPtr unless an "uplevel" command or
				 * something equivalent was active in the
				 * caller). */
    int level;			/* Level of this procedure, for "uplevel"
				 * purposes (i.e. corresponds to nesting of
				 * callerVarPtr's, not callerPtr's). 1 for
				 * outermost procedure, 0 for top-level. */
    Proc *procPtr;		/* Points to the structure defining the called
				 * procedure. Used to get information such as
				 * the number of compiled local variables
				 * (local variables assigned entries ["slots"]
				 * in the compiledLocals array below). */
    Tcl_HashTable *varTablePtr;	/* Hash table containing local variables not
				 * recognized by the compiler, or created at
				 * execution time through, e.g., upvar.
				 * Initially NULL and created if needed. */
    int numCompiledLocals;	/* Count of local variables recognized by the
				 * compiler including arguments. */
    Var *compiledLocals;	/* Points to the array of local variables
				 * recognized by the compiler. The compiler
				 * emits code that refers to these variables
				 * using an index into this array. */
    ClientData clientData;	/* Pointer to some context that is used by
				 * object systems. The meaning of the contents
				 * of this field is defined by the code that
				 * sets it, and it should only ever be set by
				 * the code that is pushing the frame. In that
				 * case, the code that sets it should also
				 * have some means of discovering what the
				 * meaning of the value is, which we do not
				 * specify. */
} CallFrame;

#define FRAME_IS_PROC 0x1

/*
 * TIP #280
 * The structure below defines a command frame. A command frame provides
 * location information for all commands executing a tcl script (source, eval,
 * uplevel, procedure bodies, ...). The runtime structure essentially contains
 * the stack trace as it would be if the currently executing command were to
 * throw an error.
 *
 * For commands where it makes sense it refers to the associated CallFrame as
 * well.
 *
 * The structures are chained in a single list, with the top of the stack
 * anchored in the Interp structure.
 *
 * Instances can be allocated on the C stack, or the heap, the former making
 * cleanup a bit simpler.
 */

typedef struct CmdFrame {
    /* General data. Always available. */

    int type;			/* Values see below. */
    int level;			/* #Frames in stack, prevent O(n) scan of
				 * list. */
    int *line;			/* Lines the words of the command start on. */
    int nline;

    CallFrame *framePtr;	/* Procedure activation record, may be
				 * NULL. */
    struct CmdFrame *nextPtr;	/* Link to calling frame */

    /*
     * Data needed for Eval vs TEBC
     *
     * EXECUTION CONTEXTS and usage of CmdFrame
     *
     * Field      TEBC            EvalEx          EvalObjEx
     * =======    ====            ======          =========
     * level      yes             yes             yes
     * type       BC/PREBC        SRC/EVAL        EVAL_LIST
     * line0      yes             yes             yes
     * framePtr   yes             yes             yes
     * =======    ====            ======          =========
     *
     * =======    ====            ======          ========= union data
     * line1      -               yes             -
     * line3      -               yes             -
     * path       -               yes             -
     * -------    ----            ------          ---------
     * codePtr    yes             -               -
     * pc         yes             -               -
     * =======    ====            ======          =========
     *
     * =======    ====            ======          ========= | union cmd
     * listPtr    -               -               yes       |
     * -------    ----            ------          --------- |
     * cmd        yes             yes             -         |
     * cmdlen     yes             yes             -         |
     * -------    ----            ------          --------- |
     */

    union {
	struct {
	    Tcl_Obj *path;	/* Path of the sourced file the command is
				 * in. */
	} eval;
	struct {
	    CONST void *codePtr;/* Byte code currently executed */
	    CONST char *pc;	/* and instruction pointer.     */
	} tebc;
    } data;
    union {
	struct {
	    CONST char *cmd;	/* The executed command, if possible */
	    int len;		/* And its length */
	} str;
	Tcl_Obj *listPtr;	/* Tcl_EvalObjEx, cmd list */
    } cmd;
} CmdFrame;

/*
 * The following macros define the allowed values for the type field of the
 * CmdFrame structure above. Some of the values occur only in the extended
 * location data referenced via the 'baseLocPtr'.
 *
 * TCL_LOCATION_EVAL      : Frame is for a script evaluated by EvalEx.
 * TCL_LOCATION_EVAL_LIST : Frame is for a script evaluated by the list
 *                          optimization path of EvalObjEx.
 * TCL_LOCATION_BC        : Frame is for bytecode.
 * TCL_LOCATION_PREBC     : Frame is for precompiled bytecode.
 * TCL_LOCATION_SOURCE    : Frame is for a script evaluated by EvalEx, from a
 *                          sourced file.
 * TCL_LOCATION_PROC      : Frame is for bytecode of a procedure.
 *
 * A TCL_LOCATION_BC type in a frame can be overridden by _SOURCE and _PROC
 * types, per the context of the byte code in execution.
 */

#define TCL_LOCATION_EVAL      (0) /* Location in a dynamic eval script */
#define TCL_LOCATION_EVAL_LIST (1) /* Location in a dynamic eval script, list-path */
#define TCL_LOCATION_BC        (2) /* Location in byte code */
#define TCL_LOCATION_PREBC     (3) /* Location in precompiled byte code, no location */
#define TCL_LOCATION_SOURCE    (4) /* Location in a file */
#define TCL_LOCATION_PROC      (5) /* Location in a dynamic proc */

#define TCL_LOCATION_LAST      (6) /* Number of values in the enum */

/*
 * Structure passed to describe procedure-like "procedures" that are not
 * procedures (e.g. a lambda) so that their details can be reported correctly
 * by [info frame]. Contains a sub-structure for each extra field.
 */

typedef Tcl_Obj *(*GetFrameInfoValueProc)(ClientData clientData);
typedef struct {
    const char *name;		/* Name of this field. */
    GetFrameInfoValueProc proc;	/* Function to generate a Tcl_Obj* from the
				 * clientData, or just use the clientData
				 * directly (after casting) if NULL. */
    ClientData clientData;	/* Context for above function, or Tcl_Obj* if
				 * proc field is NULL. */
} ExtraFrameInfoField;
typedef struct {
    int length;			/* Length of array. */
    ExtraFrameInfoField fields[2];
				/* Really as long as necessary, but this is
				 * long enough for nearly anything. */
} ExtraFrameInfo;

/*
 *----------------------------------------------------------------
 * Data structures and procedures related to TclHandles, which are a very
 * lightweight method of preserving enough information to determine if an
 * arbitrary malloc'd block has been deleted.
 *----------------------------------------------------------------
 */

typedef void **TclHandle;

/*
 *----------------------------------------------------------------
 * Experimental flag value passed to Tcl_GetRegExpFromObj.
 * Intended for use only by Expect.
 * It will probably go away in a later release.
 *----------------------------------------------------------------
 */

#define TCL_REG_BOSONLY         002000  /* prepend \A to pattern so it only
					 * matches at the beginning of the
					 * string. */

/*
 *----------------------------------------------------------------
 * Data structures related to expressions.
 *----------------------------------------------------------------
 */

/*
 * The data structure below defines a math function (e.g. sin or hypot) for
 * use in Tcl expressions.
 */

#define MAX_MATH_ARGS 5
typedef struct MathFunc {
    int builtinFuncIndex;	/* If this is a builtin math function, its
				 * index in the array of builtin functions.
				 * (tclCompilation.h lists these indices.)
				 * The value is -1 if this is a new function
				 * defined by Tcl_CreateMathFunc. The value is
				 * also -1 if a builtin function is replaced
				 * by a Tcl_CreateMathFunc call. */
    int numArgs;		/* Number of arguments for function. */
    Tcl_ValueType argTypes[MAX_MATH_ARGS];
				/* Acceptable types for each argument. */
    Tcl_MathProc *proc;		/* Procedure that implements this function.
				 * NULL if isBuiltinFunc is 1. */
    ClientData clientData;	/* Additional argument to pass to the function
				 * when invoking it. NULL if isBuiltinFunc is
				 * 1. */
} MathFunc;

/*
 * These are a thin layer over TclpThreadKeyDataGet and TclpThreadKeyDataSet
 * when threads are used, or an emulation if there are no threads. These are
 * really internal and Tcl clients should use Tcl_GetThreadData.
 */

MODULE_SCOPE void *	TclThreadDataKeyGet(Tcl_ThreadDataKey *keyPtr);
MODULE_SCOPE void	TclThreadDataKeySet(Tcl_ThreadDataKey *keyPtr,
			    void *data);

/*
 * This is a convenience macro used to initialize a thread local storage ptr.
 */

#define TCL_TSD_INIT(keyPtr) \
  (ThreadSpecificData *)Tcl_GetThreadData((keyPtr), sizeof(ThreadSpecificData))


/*
 *----------------------------------------------------------------
 * Data structures related to bytecode compilation and execution. These are
 * used primarily in tclCompile.c, tclExecute.c, and tclBasic.c.
 *----------------------------------------------------------------
 */

/*
 * Forward declaration to prevent errors when the forward references to
 * Tcl_Parse and CompileEnv are encountered in the procedure type CompileProc
 * declared below.
 */

struct CompileEnv;

/*
 * The type of procedures called by the Tcl bytecode compiler to compile
 * commands. Pointers to these procedures are kept in the Command structure
 * describing each command. The integer value returned by a CompileProc must
 * be one of the following:
 *
 * TCL_OK		Compilation completed normally.
 * TCL_ERROR 		Compilation could not be completed. This can be just a
 * 			judgment by the CompileProc that the command is too
 * 			complex to compile effectively, or it can indicate
 * 			that in the current state of the interp, the command
 * 			would raise an error. The bytecode compiler will not
 * 			do any error reporting at compiler time. Error
 * 			reporting is deferred until the actual runtime,
 * 			because by then changes in the interp state may allow
 * 			the command to be successfully evaluated.
 * TCL_OUT_LINE_COMPILE	A source-compatible alias for TCL_ERROR, kept for the
 * 			sake of old code only.
 */

#define TCL_OUT_LINE_COMPILE	TCL_ERROR

typedef int (CompileProc) (Tcl_Interp *interp, Tcl_Parse *parsePtr,
	struct CompileEnv *compEnvPtr);

/*
 * The type of procedure called from the compilation hook point in
 * SetByteCodeFromAny.
 */

typedef int (CompileHookProc) (Tcl_Interp *interp,
	struct CompileEnv *compEnvPtr, ClientData clientData);

/*
 * The data structure for a (linked list of) execution stacks.
 */

typedef struct ExecStack {
    struct ExecStack *prevPtr;
    struct ExecStack *nextPtr;
    Tcl_Obj **markerPtr;
    Tcl_Obj **endPtr;
    Tcl_Obj **tosPtr;
    Tcl_Obj *stackWords[1];
} ExecStack;


/*
 * The data structure defining the execution environment for ByteCode's.
 * There is one ExecEnv structure per Tcl interpreter. It holds the evaluation
 * stack that holds command operands and results. The stack grows towards
 * increasing addresses. The member stackPtr points to the stackItems of the
 * currently active execution stack.
 */

typedef struct ExecEnv {
    ExecStack *execStackPtr;	/* Points to the first item in the evaluation
				 * stack on the heap. */
    Tcl_Obj *constants[2];	/* Pointers to constant "0" and "1" objs. */
} ExecEnv;

/*
 * The definitions for the LiteralTable and LiteralEntry structures. Each
 * interpreter contains a LiteralTable. It is used to reduce the storage
 * needed for all the Tcl objects that hold the literals of scripts compiled
 * by the interpreter. A literal's object is shared by all the ByteCodes that
 * refer to the literal. Each distinct literal has one LiteralEntry entry in
 * the LiteralTable. A literal table is a specialized hash table that is
 * indexed by the literal's string representation, which may contain null
 * characters.
 *
 * Note that we reduce the space needed for literals by sharing literal
 * objects both within a ByteCode (each ByteCode contains a local
 * LiteralTable) and across all an interpreter's ByteCodes (with the
 * interpreter's global LiteralTable).
 */

typedef struct LiteralEntry {
    struct LiteralEntry *nextPtr;
				/* Points to next entry in this hash bucket or
				 * NULL if end of chain. */
    Tcl_Obj *objPtr;		/* Points to Tcl object that holds the
				 * literal's bytes and length. */
    int refCount;		/* If in an interpreter's global literal
				 * table, the number of ByteCode structures
				 * that share the literal object; the literal
				 * entry can be freed when refCount drops to
				 * 0. If in a local literal table, -1. */
    Namespace *nsPtr;		/* Namespace in which this literal is used. We
				 * try to avoid sharing literal non-FQ command
				 * names among different namespaces to reduce
				 * shimmering. */
} LiteralEntry;

typedef struct LiteralTable {
    LiteralEntry **buckets;	/* Pointer to bucket array. Each element
				 * points to first entry in bucket's hash
				 * chain, or NULL. */
    LiteralEntry *staticBuckets[TCL_SMALL_HASH_TABLE];
				/* Bucket array used for small tables to avoid
				 * mallocs and frees. */
    int numBuckets;		/* Total number of buckets allocated at
				 * **buckets. */
    int numEntries;		/* Total number of entries present in
				 * table. */
    int rebuildSize;		/* Enlarge table when numEntries gets to be
				 * this large. */
    int mask;			/* Mask value used in hashing function. */
} LiteralTable;

/*
 * The following structure defines for each Tcl interpreter various
 * statistics-related information about the bytecode compiler and
 * interpreter's operation in that interpreter.
 */

#ifdef TCL_COMPILE_STATS
typedef struct ByteCodeStats {
    long numExecutions;		/* Number of ByteCodes executed. */
    long numCompilations;	/* Number of ByteCodes created. */
    long numByteCodesFreed;	/* Number of ByteCodes destroyed. */
    long instructionCount[256];	/* Number of times each instruction was
				 * executed. */

    double totalSrcBytes;	/* Total source bytes ever compiled. */
    double totalByteCodeBytes;	/* Total bytes for all ByteCodes. */
    double currentSrcBytes;	/* Src bytes for all current ByteCodes. */
    double currentByteCodeBytes;/* Code bytes in all current ByteCodes. */

    long srcCount[32];		/* Source size distribution: # of srcs of
				 * size [2**(n-1)..2**n), n in [0..32). */
    long byteCodeCount[32];	/* ByteCode size distribution. */
    long lifetimeCount[32];	/* ByteCode lifetime distribution (ms). */

    double currentInstBytes;	/* Instruction bytes-current ByteCodes. */
    double currentLitBytes;	/* Current literal bytes. */
    double currentExceptBytes;	/* Current exception table bytes. */
    double currentAuxBytes;	/* Current auxiliary information bytes. */
    double currentCmdMapBytes;	/* Current src<->code map bytes. */

    long numLiteralsCreated;	/* Total literal objects ever compiled. */
    double totalLitStringBytes;	/* Total string bytes in all literals. */
    double currentLitStringBytes;
				/* String bytes in current literals. */
    long literalCount[32];	/* Distribution of literal string sizes. */
} ByteCodeStats;
#endif /* TCL_COMPILE_STATS */

/*
 *----------------------------------------------------------------
 * Data structures related to commands.
 *----------------------------------------------------------------
 */

/*
 * An imported command is created in an namespace when it imports a "real"
 * command from another namespace. An imported command has a Command structure
 * that points (via its ClientData value) to the "real" Command structure in
 * the source namespace's command table. The real command records all the
 * imported commands that refer to it in a list of ImportRef structures so
 * that they can be deleted when the real command is deleted.
 */

typedef struct ImportRef {
    struct Command *importedCmdPtr;
				/* Points to the imported command created in
				 * an importing namespace; this command
				 * redirects its invocations to the "real"
				 * command. */
    struct ImportRef *nextPtr;	/* Next element on the linked list of imported
				 * commands that refer to the "real" command.
				 * The real command deletes these imported
				 * commands on this list when it is
				 * deleted. */
} ImportRef;

/*
 * Data structure used as the ClientData of imported commands: commands
 * created in an namespace when it imports a "real" command from another
 * namespace.
 */

typedef struct ImportedCmdData {
    struct Command *realCmdPtr;	/* "Real" command that this imported command
				 * refers to. */
    struct Command *selfPtr;	/* Pointer to this imported command. Needed
				 * only when deleting it in order to remove it
				 * from the real command's linked list of
				 * imported commands that refer to it. */
} ImportedCmdData;

/*
 * A Command structure exists for each command in a namespace. The Tcl_Command
 * opaque type actually refers to these structures.
 */

typedef struct Command {
    Tcl_HashEntry *hPtr;	/* Pointer to the hash table entry that refers
				 * to this command. The hash table is either a
				 * namespace's command table or an
				 * interpreter's hidden command table. This
				 * pointer is used to get a command's name
				 * from its Tcl_Command handle. NULL means
				 * that the hash table entry has been removed
				 * already (this can happen if deleteProc
				 * causes the command to be deleted or
				 * recreated). */
    Namespace *nsPtr;		/* Points to the namespace containing this
				 * command. */
    int refCount;		/* 1 if in command hashtable plus 1 for each
				 * reference from a CmdName Tcl object
				 * representing a command's name in a ByteCode
				 * instruction sequence. This structure can be
				 * freed when refCount becomes zero. */
    int cmdEpoch;		/* Incremented to invalidate any references
				 * that point to this command when it is
				 * renamed, deleted, hidden, or exposed. */
    CompileProc *compileProc;	/* Procedure called to compile command. NULL
				 * if no compile proc exists for command. */
    Tcl_ObjCmdProc *objProc;	/* Object-based command procedure. */
    ClientData objClientData;	/* Arbitrary value passed to object proc. */
    Tcl_CmdProc *proc;		/* String-based command procedure. */
    ClientData clientData;	/* Arbitrary value passed to string proc. */
    Tcl_CmdDeleteProc *deleteProc;
				/* Procedure invoked when deleting command to,
				 * e.g., free all client data. */
    ClientData deleteData;	/* Arbitrary value passed to deleteProc. */
    int flags;			/* Miscellaneous bits of information about
				 * command. See below for definitions. */
    ImportRef *importRefPtr;	/* List of each imported Command created in
				 * another namespace when this command is
				 * imported. These imported commands redirect
				 * invocations back to this command. The list
				 * is used to remove all those imported
				 * commands when deleting this "real"
				 * command. */
    CommandTrace *tracePtr;	/* First in list of all traces set for this
				 * command. */
} Command;

/*
 * Flag bits for commands.
 *
 * CMD_IS_DELETED -		Means that the command is in the process of
 *				being deleted (its deleteProc is currently
 *				executing). Other attempts to delete the
 *				command should be ignored.
 * CMD_TRACE_ACTIVE -		1 means that trace processing is currently
 *				underway for a rename/delete change. See the
 *				two flags below for which is currently being
 *				processed.
 * CMD_HAS_EXEC_TRACES -	1 means that this command has at least one
 *				execution trace (as opposed to simple
 *				delete/rename traces) in its tracePtr list.
 * TCL_TRACE_RENAME -		A rename trace is in progress. Further
 *				recursive renames will not be traced.
 * TCL_TRACE_DELETE -		A delete trace is in progress. Further
 *				recursive deletes will not be traced.
 * (these last two flags are defined in tcl.h)
 */

#define CMD_IS_DELETED		0x1
#define CMD_TRACE_ACTIVE	0x2
#define CMD_HAS_EXEC_TRACES	0x4

/*
 *----------------------------------------------------------------
 * Data structures related to name resolution procedures.
 *----------------------------------------------------------------
 */

/*
 * The interpreter keeps a linked list of name resolution schemes. The scheme
 * for a namespace is consulted first, followed by the list of schemes in an
 * interpreter, followed by the default name resolution in Tcl. Schemes are
 * added/removed from the interpreter's list by calling Tcl_AddInterpResolver
 * and Tcl_RemoveInterpResolver.
 */

typedef struct ResolverScheme {
    char *name;			/* Name identifying this scheme. */
    Tcl_ResolveCmdProc *cmdResProc;
				/* Procedure handling command name
				 * resolution. */
    Tcl_ResolveVarProc *varResProc;
				/* Procedure handling variable name resolution
				 * for variables that can only be handled at
				 * runtime. */
    Tcl_ResolveCompiledVarProc *compiledVarResProc;
				/* Procedure handling variable name resolution
				 * at compile time. */

    struct ResolverScheme *nextPtr;
				/* Pointer to next record in linked list. */
} ResolverScheme;

/*
 * Forward declaration of the TIP#143 limit handler structure.
 */

typedef struct LimitHandler LimitHandler;

/*
 * TIP #268.
 * Values for the selection mode, i.e the package require preferences.
 */

enum PkgPreferOptions {
    PKG_PREFER_LATEST, PKG_PREFER_STABLE
};

/*
 *----------------------------------------------------------------
 * This structure defines an interpreter, which is a collection of commands
 * plus other state information related to interpreting commands, such as
 * variable storage. Primary responsibility for this data structure is in
 * tclBasic.c, but almost every Tcl source file uses something in here.
 *----------------------------------------------------------------
 */

typedef struct Interp {
    /*
     * Note: the first three fields must match exactly the fields in a
     * Tcl_Interp struct (see tcl.h). If you change one, be sure to change the
     * other.
     *
     * The interpreter's result is held in both the string and the
     * objResultPtr fields. These fields hold, respectively, the result's
     * string or object value. The interpreter's result is always in the
     * result field if that is non-empty, otherwise it is in objResultPtr.
     * The two fields are kept consistent unless some C code sets
     * interp->result directly. Programs should not access result and
     * objResultPtr directly; instead, they should always get and set the
     * result using procedures such as Tcl_SetObjResult, Tcl_GetObjResult, and
     * Tcl_GetStringResult. See the SetResult man page for details.
     */

    char *result;		/* If the last command returned a string
				 * result, this points to it. Should not be
				 * accessed directly; see comment above. */
    Tcl_FreeProc *freeProc;	/* Zero means a string result is statically
				 * allocated. TCL_DYNAMIC means string result
				 * was allocated with ckalloc and should be
				 * freed with ckfree. Other values give
				 * address of procedure to invoke to free the
				 * string result. Tcl_Eval must free it before
				 * executing next command. */
    int errorLine;		/* When TCL_ERROR is returned, this gives the
				 * line number in the command where the error
				 * occurred (1 means first line). */
    struct TclStubs *stubTable;	/* Pointer to the exported Tcl stub table. On
				 * previous versions of Tcl this is a pointer
				 * to the objResultPtr or a pointer to a
				 * buckets array in a hash table. We therefore
				 * have to do some careful checking before we
				 * can use this. */

    TclHandle handle;		/* Handle used to keep track of when this
				 * interp is deleted. */

    Namespace *globalNsPtr;	/* The interpreter's global namespace. */
    Tcl_HashTable *hiddenCmdTablePtr;
				/* Hash table used by tclBasic.c to keep track
				 * of hidden commands on a per-interp
				 * basis. */
    ClientData interpInfo;	/* Information used by tclInterp.c to keep
				 * track of master/slave interps on a
				 * per-interp basis. */
    Tcl_HashTable mathFuncTable;/* Contains all the math functions currently
				 * defined for the interpreter. Indexed by
				 * strings (function names); values have type
				 * (MathFunc *). */

    /*
     * Information related to procedures and variables. See tclProc.c and
     * tclVar.c for usage.
     */

    int numLevels;		/* Keeps track of how many nested calls to
				 * Tcl_Eval are in progress for this
				 * interpreter. It's used to delay deletion of
				 * the table until all Tcl_Eval invocations
				 * are completed. */
    int maxNestingDepth;	/* If numLevels exceeds this value then Tcl
				 * assumes that infinite recursion has
				 * occurred and it generates an error. */
    CallFrame *framePtr;	/* Points to top-most in stack of all nested
				 * procedure invocations. */
    CallFrame *varFramePtr;	/* Points to the call frame whose variables
				 * are currently in use (same as framePtr
				 * unless an "uplevel" command is
				 * executing). */ 
    ActiveVarTrace *activeVarTracePtr;
				/* First in list of active traces for interp,
				 * or NULL if no active traces. */
    int returnCode;		/* [return -code] parameter */
    CallFrame *rootFramePtr;    /* Global frame pointer for this interpreter */
    Namespace *lookupNsPtr;	/* Namespace to use ONLY on the next
				 * TCL_EVAL_INVOKE call to Tcl_EvalObjv */

    /*
     * Information used by Tcl_AppendResult to keep track of partial results.
     * See Tcl_AppendResult code for details.
     */

    char *appendResult;		/* Storage space for results generated by
				 * Tcl_AppendResult. Ckalloc-ed. NULL means
				 * not yet allocated. */
    int appendAvl;		/* Total amount of space available at
				 * partialResult. */
    int appendUsed;		/* Number of non-null bytes currently stored
				 * at partialResult. */

    /*
     * Information about packages. Used only in tclPkg.c.
     */

    Tcl_HashTable packageTable;	/* Describes all of the packages loaded in or
				 * available to this interpreter. Keys are
				 * package names, values are (Package *)
				 * pointers. */
    char *packageUnknown;	/* Command to invoke during "package require"
				 * commands for packages that aren't described
				 * in packageTable. Ckalloc'ed, may be
				 * NULL. */
    /*
     * Miscellaneous information:
     */

    int cmdCount;		/* Total number of times a command procedure
				 * has been called for this interpreter. */
    int evalFlags;		/* Flags to control next call to Tcl_Eval.
				 * Normally zero, but may be set before
				 * calling Tcl_Eval. See below for valid
				 * values. */
    int unused1;		/* No longer used (was termOffset) */
    LiteralTable literalTable;	/* Contains LiteralEntry's describing all Tcl
				 * objects holding literals of scripts
				 * compiled by the interpreter. Indexed by the
				 * string representations of literals. Used to
				 * avoid creating duplicate objects. */
    int compileEpoch;		/* Holds the current "compilation epoch" for
				 * this interpreter. This is incremented to
				 * invalidate existing ByteCodes when, e.g., a
				 * command with a compile procedure is
				 * redefined. */
    Proc *compiledProcPtr;	/* If a procedure is being compiled, a pointer
				 * to its Proc structure; otherwise, this is
				 * NULL. Set by ObjInterpProc in tclProc.c and
				 * used by tclCompile.c to process local
				 * variables appropriately. */
    ResolverScheme *resolverPtr;
				/* Linked list of name resolution schemes
				 * added to this interpreter. Schemes are
				 * added and removed by calling
				 * Tcl_AddInterpResolvers and
				 * Tcl_RemoveInterpResolver respectively. */
    Tcl_Obj *scriptFile;	/* NULL means there is no nested source
				 * command active; otherwise this points to
				 * pathPtr of the file being sourced. */
    int flags;			/* Various flag bits. See below. */
    long randSeed;		/* Seed used for rand() function. */
    Trace *tracePtr;		/* List of traces for this interpreter. */
    Tcl_HashTable *assocData;	/* Hash table for associating data with this
				 * interpreter. Cleaned up when this
				 * interpreter is deleted. */
    struct ExecEnv *execEnvPtr;	/* Execution environment for Tcl bytecode
				 * execution. Contains a pointer to the Tcl
				 * evaluation stack. */
    Tcl_Obj *emptyObjPtr;	/* Points to an object holding an empty
				 * string. Returned by Tcl_ObjSetVar2 when
				 * variable traces change a variable in a
				 * gross way. */
    char resultSpace[TCL_RESULT_SIZE+1];
				/* Static space holding small results. */
    Tcl_Obj *objResultPtr;	/* If the last command returned an object
				 * result, this points to it. Should not be
				 * accessed directly; see comment above. */
    Tcl_ThreadId threadId;	/* ID of thread that owns the interpreter */

    ActiveCommandTrace *activeCmdTracePtr;
				/* First in list of active command traces for
				 * interp, or NULL if no active traces. */
    ActiveInterpTrace *activeInterpTracePtr;
				/* First in list of active traces for interp,
				 * or NULL if no active traces. */

    int tracesForbiddingInline; /* Count of traces (in the list headed by
				 * tracePtr) that forbid inline bytecode
				 * compilation */

    /* Fields used to manage extensible return options (TIP 90) */
    Tcl_Obj *returnOpts;	/* A dictionary holding the options to the
				 * last [return] command */

    Tcl_Obj *errorInfo;		/* errorInfo value (now as a Tcl_Obj) */
    Tcl_Obj *eiVar;		/* cached ref to ::errorInfo variable */
    Tcl_Obj *errorCode;		/* errorCode value (now as a Tcl_Obj) */
    Tcl_Obj *ecVar;		/* cached ref to ::errorInfo variable */
    int returnLevel;		/* [return -level] parameter */

    /*
     * Resource limiting framework support (TIP#143).
     */

    struct {
	int active;		/* Flag values defining which limits have been
				 * set. */
	int granularityTicker;	/* Counter used to determine how often to
				 * check the limits. */
	int exceeded;		/* Which limits have been exceeded, described
				 * as flag values the same as the 'active'
				 * field. */

	int cmdCount;		/* Limit for how many commands to execute in
				 * the interpreter. */
	LimitHandler *cmdHandlers;
				/* Handlers to execute when the limit is
				 * reached. */
	int cmdGranularity;	/* Mod factor used to determine how often to
				 * evaluate the limit check. */

	Tcl_Time time;		/* Time limit for execution within the
				 * interpreter. */
	LimitHandler *timeHandlers;
				/* Handlers to execute when the limit is
				 * reached. */
	int timeGranularity;	/* Mod factor used to determine how often to
				 * evaluate the limit check. */
	Tcl_TimerToken timeEvent;
				/* Handle for a timer callback that will occur
				 * when the time-limit is exceeded. */

	Tcl_HashTable callbacks;/* Mapping from (interp,type) pair to data
				 * used to install a limit handler callback to
				 * run in _this_ interp when the limit is
				 * exceeded. */
    } limit;

    /*
     * Information for improved default error generation from ensembles
     * (TIP#112).
     */

    struct {
	Tcl_Obj *CONST *sourceObjs;
				/* What arguments were actually input into the
				 * *root* ensemble command? (Nested ensembles
				 * don't rewrite this.) NULL if we're not
				 * processing an ensemble. */
	int numRemovedObjs;	/* How many arguments have been stripped off
				 * because of ensemble processing. */
	int numInsertedObjs;	/* How many of the current arguments were
				 * inserted by an ensemble. */
    } ensembleRewrite;

    /*
     * TIP #219 ... Global info for the I/O system ...
     */

    Tcl_Obj *chanMsg;		/* Error message set by channel drivers, for
				 * the propagation of arbitrary Tcl errors.
				 * This information, if present (chanMsg not
				 * NULL), takes precedence over a POSIX error
				 * code returned by a channel operation. */

    /* TIP #280 */
    CmdFrame* cmdFramePtr;      /* Points to the command frame containing
				 * the location information for the current
				 * command. */
    CONST CmdFrame* invokeCmdFramePtr; /* Points to the command frame which is the
				  * invoking context of the bytecode compiler.
				  * NULL when the byte code compiler is not
				  * active */
    int invokeWord;             /* Index of the word in the command which
				 * is getting compiled. */
    Tcl_HashTable* linePBodyPtr;
                                /* This table remembers for each
				 * statically defined procedure the
				 * location information for its
				 * body. It is keyed by the address of
				 * the Proc structure for a procedure.
				 */
    Tcl_HashTable* lineBCPtr;
                                /* This table remembers for each
				 * ByteCode object the location
				 * information for its body. It is
				 * keyed by the address of the Proc
				 * structure for a procedure.
				 */
    /*
     * TIP #268. The currently active selection mode, i.e. the package require
     * preferences.
     */

    int packagePrefer;          /* Current package selection mode. */

    /*
     * Statistical information about the bytecode compiler and interpreter's
     * operation.
     */

#ifdef TCL_COMPILE_STATS
    ByteCodeStats stats;	/* Holds compilation and execution statistics
				 * for this interpreter. */
#endif /* TCL_COMPILE_STATS */
} Interp;

/*
 * General list of interpreters. Doubly linked for easier removal of items
 * deep in the list.
 */

typedef struct InterpList {
    Interp *interpPtr;
    struct InterpList *prevPtr;
    struct InterpList *nextPtr;
} InterpList;

/*
 * Macros for splicing into and out of doubly linked lists. They assume
 * existence of struct items 'prevPtr' and 'nextPtr'.
 *
 * a = element to add or remove.
 * b = list head.
 *
 * TclSpliceIn adds to the head of the list.
 */

#define TclSpliceIn(a,b)			\
    (a)->nextPtr = (b);				\
    if ((b) != NULL) {				\
	(b)->prevPtr = (a);			\
    }						\
    (a)->prevPtr = NULL, (b) = (a);

#define TclSpliceOut(a,b)			\
    if ((a)->prevPtr != NULL) {			\
	(a)->prevPtr->nextPtr = (a)->nextPtr;	\
    } else {					\
	(b) = (a)->nextPtr;			\
    }						\
    if ((a)->nextPtr != NULL) {			\
	(a)->nextPtr->prevPtr = (a)->prevPtr;	\
    }

/*
 * EvalFlag bits for Interp structures:
 *
 * TCL_ALLOW_EXCEPTIONS	1 means it's OK for the script to terminate with a
 *			code other than TCL_OK or TCL_ERROR; 0 means codes
 *			other than these should be turned into errors.
 */

#define TCL_ALLOW_EXCEPTIONS	4
#define TCL_EVAL_FILE             2
#define TCL_EVAL_CTX              8

/*
 * Flag bits for Interp structures:
 *
 * DELETED:		Non-zero means the interpreter has been deleted:
 *			don't process any more commands for it, and destroy
 *			the structure as soon as all nested invocations of
 *			Tcl_Eval are done.
 * ERR_ALREADY_LOGGED:	Non-zero means information has already been logged in
 *			iPtr->errorInfo for the current Tcl_Eval instance, so
 *			Tcl_Eval needn't log it (used to implement the "error
 *			message log" command).
 * DONT_COMPILE_CMDS_INLINE: Non-zero means that the bytecode compiler should
 *			not compile any commands into an inline sequence of
 *			instructions. This is set 1, for example, when command
 *			traces are requested.
 * RAND_SEED_INITIALIZED: Non-zero means that the randSeed value of the interp
 *			has not be initialized. This is set 1 when we first
 *			use the rand() or srand() functions.
 * SAFE_INTERP:		Non zero means that the current interp is a safe
 *			interp (i.e. it has only the safe commands installed,
 *			less priviledge than a regular interp).
 * INTERP_TRACE_IN_PROGRESS: Non-zero means that an interp trace is currently
 *			active; so no further trace callbacks should be
 *			invoked.
 * INTERP_ALTERNATE_WRONG_ARGS: Used for listing second and subsequent forms
 *			of the wrong-num-args string in Tcl_WrongNumArgs.
 *			Makes it append instead of replacing and uses
 *			different intermediate text.
 *
 * WARNING: For the sake of some extensions that have made use of former
 * internal values, do not re-use the flag values 2 (formerly ERR_IN_PROGRESS)
 * or 8 (formerly ERROR_CODE_SET).
 */

#define DELETED				    1
#define ERR_ALREADY_LOGGED		    4
#define DONT_COMPILE_CMDS_INLINE	 0x20
#define RAND_SEED_INITIALIZED		 0x40
#define SAFE_INTERP			 0x80
#define INTERP_TRACE_IN_PROGRESS	0x200
#define INTERP_ALTERNATE_WRONG_ARGS	0x400

/*
 * Maximum number of levels of nesting permitted in Tcl commands (used to
 * catch infinite recursion).
 */

#define MAX_NESTING_DEPTH	1000

/*
 * TIP#143 limit handler internal representation.
 */

struct LimitHandler {
    int flags;			/* The state of this particular handler. */
    Tcl_LimitHandlerProc *handlerProc;
				/* The handler callback. */
    ClientData clientData;	/* Opaque argument to the handler callback. */
    Tcl_LimitHandlerDeleteProc *deleteProc;
				/* How to delete the clientData */
    LimitHandler *prevPtr;	/* Previous item in linked list of handlers */
    LimitHandler *nextPtr;	/* Next item in linked list of handlers */
};

/*
 * Values for the LimitHandler flags field.
 *	LIMIT_HANDLER_ACTIVE - Whether the handler is currently being
 *		processed; handlers are never to be entered reentrantly.
 *	LIMIT_HANDLER_DELETED - Whether the handler has been deleted. This
 *		should not normally be observed because when a handler is
 *		deleted it is also spliced out of the list of handlers, but
 *		even so we will be careful.
 */

#define LIMIT_HANDLER_ACTIVE	0x01
#define LIMIT_HANDLER_DELETED	0x02

/*
 * The macro below is used to modify a "char" value (e.g. by casting it to an
 * unsigned character) so that it can be used safely with macros such as
 * isspace.
 */

#define UCHAR(c) ((unsigned char) (c))

/*
 * This macro is used to determine the offset needed to safely allocate any
 * data structure in memory. Given a starting offset or size, it "rounds up"
 * or "aligns" the offset to the next 8-byte boundary so that any data
 * structure can be placed at the resulting offset without fear of an
 * alignment error.
 *
 * WARNING!! DO NOT USE THIS MACRO TO ALIGN POINTERS: it will produce the
 * wrong result on platforms that allocate addresses that are divisible by 4
 * or 2. Only use it for offsets or sizes.
 *
 * This macro is only used by tclCompile.c in the core (Bug 926445). It
 * however not be made file static, as extensions that touch bytecodes
 * (notably tbcload) require it.
 */

#define TCL_ALIGN(x) (((int)(x) + 7) & ~7)


/*
 * The following enum values are used to specify the runtime platform setting
 * of the tclPlatform variable.
 */

typedef enum {
    TCL_PLATFORM_UNIX = 0,	/* Any Unix-like OS. */
    TCL_PLATFORM_WINDOWS = 2	/* Any Microsoft Windows OS. */
} TclPlatformType;

/*
 * The following enum values are used to indicate the translation of a Tcl
 * channel. Declared here so that each platform can define
 * TCL_PLATFORM_TRANSLATION to the native translation on that platform
 */

typedef enum TclEolTranslation {
    TCL_TRANSLATE_AUTO,		/* Eol == \r, \n and \r\n. */
    TCL_TRANSLATE_CR,		/* Eol == \r. */
    TCL_TRANSLATE_LF,		/* Eol == \n. */
    TCL_TRANSLATE_CRLF		/* Eol == \r\n. */
} TclEolTranslation;

/*
 * Flags for TclInvoke:
 *
 * TCL_INVOKE_HIDDEN		Invoke a hidden command; if not set, invokes
 *				an exposed command.
 * TCL_INVOKE_NO_UNKNOWN	If set, "unknown" is not invoked if the
 *				command to be invoked is not found. Only has
 *				an effect if invoking an exposed command,
 *				i.e. if TCL_INVOKE_HIDDEN is not also set.
 * TCL_INVOKE_NO_TRACEBACK	Does not record traceback information if the
 *				invoked command returns an error. Used if the
 *				caller plans on recording its own traceback
 *				information.
 */

#define	TCL_INVOKE_HIDDEN	(1<<0)
#define TCL_INVOKE_NO_UNKNOWN	(1<<1)
#define TCL_INVOKE_NO_TRACEBACK	(1<<2)

/*
 * The structure used as the internal representation of Tcl list objects. This
 * struct is grown (reallocated and copied) as necessary to hold all the
 * list's element pointers. The struct might contain more slots than currently
 * used to hold all element pointers. This is done to make append operations
 * faster.
 */

typedef struct List {
    int refCount;
    int maxElemCount;		/* Total number of element array slots. */
    int elemCount;		/* Current number of list elements. */
    int canonicalFlag;		/* Set if the string representation was
				 * derived from the list representation. May
				 * be ignored if there is no string rep at
				 * all.*/
    Tcl_Obj *elements;		/* First list element; the struct is grown to
				 * accomodate all elements. */
} List;

/*
 * Macro used to get the elements of a list object - do NOT forget to verify
 * that it is of list type before using!
 */

#define TclListObjGetElements(listPtr, objc, objv) \
    { \
	List *listRepPtr = \
		(List *) (listPtr)->internalRep.twoPtrValue.ptr1;\
	(objc) = listRepPtr->elemCount;\
	(objv) = &listRepPtr->elements;\
    }

/*
 * Flag values for TclTraceDictPath().
 *
 * DICT_PATH_READ indicates that all entries on the path must exist but no
 * updates will be needed.
 *
 * DICT_PATH_UPDATE indicates that we are going to be doing an update at the
 * tip of the path, so duplication of shared objects should be done along the
 * way.
 *
 * DICT_PATH_EXISTS indicates that we are performing an existance test and a
 * lookup failure should therefore not be an error. If (and only if) this flag
 * is set, TclTraceDictPath() will return the special value
 * DICT_PATH_NON_EXISTENT if the path is not traceable.
 *
 * DICT_PATH_CREATE (which also requires the DICT_PATH_UPDATE bit to be set)
 * indicates that we are to create non-existant dictionaries on the path.
 */

#define DICT_PATH_READ		0
#define DICT_PATH_UPDATE	1
#define DICT_PATH_EXISTS	2
#define DICT_PATH_CREATE	5

#define DICT_PATH_NON_EXISTENT	((Tcl_Obj *) (void *) 1)

/*
 *----------------------------------------------------------------
 * Data structures related to the filesystem internals
 *----------------------------------------------------------------
 */

/*
 * The version_2 filesystem is private to Tcl. As and when these changes have
 * been thoroughly tested and investigated a new public filesystem interface
 * will be released. The aim is more versatile virtual filesystem interfaces,
 * more efficiency in 'path' manipulation and usage, and cleaner filesystem
 * code internally.
 */

#define TCL_FILESYSTEM_VERSION_2	((Tcl_FSVersion) 0x2)
typedef ClientData (TclFSGetCwdProc2) (ClientData clientData);

/*
 * The following types are used for getting and storing platform-specific file
 * attributes in tclFCmd.c and the various platform-versions of that file.
 * This is done to have as much common code as possible in the file attributes
 * code. For more information about the callbacks, see TclFileAttrsCmd in
 * tclFCmd.c.
 */

typedef int (TclGetFileAttrProc) (Tcl_Interp *interp, int objIndex,
	Tcl_Obj *fileName, Tcl_Obj **attrObjPtrPtr);
typedef int (TclSetFileAttrProc) (Tcl_Interp *interp, int objIndex,
	Tcl_Obj *fileName, Tcl_Obj *attrObjPtr);

typedef struct TclFileAttrProcs {
    TclGetFileAttrProc *getProc;/* The procedure for getting attrs. */
    TclSetFileAttrProc *setProc;/* The procedure for setting attrs. */
} TclFileAttrProcs;

/*
 * Opaque handle used in pipeline routines to encapsulate platform-dependent
 * state.
 */

typedef struct TclFile_ *TclFile;

/*
 * The "globParameters" argument of the function TclGlob is an or'ed
 * combination of the following values:
 */

#define TCL_GLOBMODE_NO_COMPLAIN	1
#define TCL_GLOBMODE_JOIN		2
#define TCL_GLOBMODE_DIR		4
#define TCL_GLOBMODE_TAILS		8

typedef enum Tcl_PathPart {
    TCL_PATH_DIRNAME,
    TCL_PATH_TAIL,
    TCL_PATH_EXTENSION,
    TCL_PATH_ROOT
} Tcl_PathPart;

/*
 *----------------------------------------------------------------
 * Data structures related to obsolete filesystem hooks
 *----------------------------------------------------------------
 */

typedef int (TclStatProc_) (CONST char *path, struct stat *buf);
typedef int (TclAccessProc_) (CONST char *path, int mode);
typedef Tcl_Channel (TclOpenFileChannelProc_) (Tcl_Interp *interp,
	CONST char *fileName, CONST char *modeString, int permissions);

/*
 *----------------------------------------------------------------
 * Data structures related to procedures
 *----------------------------------------------------------------
 */

typedef Tcl_CmdProc *TclCmdProcType;
typedef Tcl_ObjCmdProc *TclObjCmdProcType;

/*
 *----------------------------------------------------------------
 * Data structures for process-global values.
 *----------------------------------------------------------------
 */

typedef void (TclInitProcessGlobalValueProc) (char **valuePtr, int *lengthPtr,
	Tcl_Encoding *encodingPtr);

/*
 * A ProcessGlobalValue struct exists for each internal value in Tcl that is
 * to be shared among several threads. Each thread sees a (Tcl_Obj) copy of
 * the value, and the master is kept as a counted string, with epoch and mutex
 * control. Each ProcessGlobalValue struct should be a static variable in some
 * file.
 */

typedef struct ProcessGlobalValue {
    int epoch;			/* Epoch counter to detect changes in the
				 * master value. */
    int numBytes;		/* Length of the master string. */
    char *value;		/* The master string value. */
    Tcl_Encoding encoding;	/* system encoding when master string was
				 * initialized. */
    TclInitProcessGlobalValueProc *proc;
    				/* A procedure to initialize the master string
				 * copy when a "get" request comes in before
				 * any "set" request has been received. */
    Tcl_Mutex mutex;		/* Enforce orderly access from multiple
				 * threads. */
    Tcl_ThreadDataKey key;	/* Key for per-thread data holding the
				 * (Tcl_Obj) copy for each thread. */
} ProcessGlobalValue;

/*
 *----------------------------------------------------------------------
 * Flags for TclParseNumber
 *----------------------------------------------------------------------
 */

#define TCL_PARSE_DECIMAL_ONLY		1
				/* Leading zero doesn't denote octal or hex */
#define TCL_PARSE_OCTAL_ONLY		2
				/* Parse octal even without prefix */
#define TCL_PARSE_HEXADECIMAL_ONLY	4
				/* Parse hexadecimal even without prefix */
#define TCL_PARSE_INTEGER_ONLY		8
				/* Disable floating point parsing */
#define TCL_PARSE_SCAN_PREFIXES		16
				/* Use [scan] rules dealing with 0? prefixes */
#define TCL_PARSE_NO_WHITESPACE		32
				/* Reject leading/trailing whitespace */

/*
 *----------------------------------------------------------------------
 * Type values TclGetNumberFromObj
 *----------------------------------------------------------------------
 */

#define TCL_NUMBER_LONG		1
#define TCL_NUMBER_WIDE		2
#define TCL_NUMBER_BIG		3
#define TCL_NUMBER_DOUBLE	4
#define TCL_NUMBER_NAN		5

/*
 *----------------------------------------------------------------
 * Variables shared among Tcl modules but not used by the outside world.
 *----------------------------------------------------------------
 */

MODULE_SCOPE char *	tclNativeExecutableName;
MODULE_SCOPE int	tclFindExecutableSearchDone;
MODULE_SCOPE char *	tclMemDumpFileName;
MODULE_SCOPE TclPlatformType tclPlatform;
MODULE_SCOPE Tcl_NotifierProcs tclOriginalNotifier;

/*
 * TIP #233 (Virtualized Time)
 * Data for the time hooks, if any.
 */

MODULE_SCOPE Tcl_GetTimeProc*   tclGetTimeProcPtr;
MODULE_SCOPE Tcl_ScaleTimeProc* tclScaleTimeProcPtr;
MODULE_SCOPE ClientData		tclTimeClientData;

/*
 * Variables denoting the Tcl object types defined in the core.
 */

MODULE_SCOPE Tcl_ObjType tclBignumType;
MODULE_SCOPE Tcl_ObjType tclBooleanType;
MODULE_SCOPE Tcl_ObjType tclByteArrayType;
MODULE_SCOPE Tcl_ObjType tclByteCodeType;
MODULE_SCOPE Tcl_ObjType tclDoubleType;
MODULE_SCOPE Tcl_ObjType tclEndOffsetType;
MODULE_SCOPE Tcl_ObjType tclIntType;
MODULE_SCOPE Tcl_ObjType tclListType;
MODULE_SCOPE Tcl_ObjType tclDictType;
MODULE_SCOPE Tcl_ObjType tclProcBodyType;
MODULE_SCOPE Tcl_ObjType tclStringType;
MODULE_SCOPE Tcl_ObjType tclArraySearchType;
MODULE_SCOPE Tcl_ObjType tclNsNameType;
#ifndef NO_WIDE_TYPE
MODULE_SCOPE Tcl_ObjType tclWideIntType;
#endif
MODULE_SCOPE Tcl_ObjType tclRegexpType;

/*
 * Variables denoting the hash key types defined in the core.
 */

MODULE_SCOPE Tcl_HashKeyType tclArrayHashKeyType;
MODULE_SCOPE Tcl_HashKeyType tclOneWordHashKeyType;
MODULE_SCOPE Tcl_HashKeyType tclStringHashKeyType;
MODULE_SCOPE Tcl_HashKeyType tclObjHashKeyType;

/*
 * The head of the list of free Tcl objects, and the total number of Tcl
 * objects ever allocated and freed.
 */

MODULE_SCOPE Tcl_Obj *	tclFreeObjList;

#ifdef TCL_COMPILE_STATS
MODULE_SCOPE long	tclObjsAlloced;
MODULE_SCOPE long	tclObjsFreed;
#define TCL_MAX_SHARED_OBJ_STATS 5
MODULE_SCOPE long	tclObjsShared[TCL_MAX_SHARED_OBJ_STATS];
#endif /* TCL_COMPILE_STATS */

/*
 * Pointer to a heap-allocated string of length zero that the Tcl core uses as
 * the value of an empty string representation for an object. This value is
 * shared by all new objects allocated by Tcl_NewObj.
 */

MODULE_SCOPE char *	tclEmptyStringRep;
MODULE_SCOPE char	tclEmptyString;

/*
 *----------------------------------------------------------------
 * Procedures shared among Tcl modules but not used by the outside world:
 *----------------------------------------------------------------
 */

MODULE_SCOPE void       TclAdvanceLines(int* line, CONST char* start,
					CONST char* end);
MODULE_SCOPE int	TclArraySet(Tcl_Interp *interp,
			    Tcl_Obj *arrayNameObj, Tcl_Obj *arrayElemObj);
MODULE_SCOPE double	TclBignumToDouble(mp_int *bignum);
MODULE_SCOPE double	TclCeil(mp_int *a);
MODULE_SCOPE int	TclCheckBadOctal(Tcl_Interp *interp,CONST char *value);
MODULE_SCOPE int	TclChanCreateObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclChanPostEventObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclChanCaughtErrorBypass(Tcl_Interp *interp,
			    Tcl_Channel chan);
MODULE_SCOPE void	TclCleanupLiteralTable(Tcl_Interp *interp,
			    LiteralTable *tablePtr);
MODULE_SCOPE int	TclDoubleDigits(char *buf, double value, int *signum);
MODULE_SCOPE void       TclDeleteNamespaceVars(Namespace *nsPtr);
/* TIP #280 - Modified token based evulation, with line information */
MODULE_SCOPE int        TclEvalEx (Tcl_Interp *interp, CONST char *script,
				   int numBytes, int flags, int line);
MODULE_SCOPE void	TclExpandTokenArray(Tcl_Parse *parsePtr);
MODULE_SCOPE int	TclFileAttrsCmd(Tcl_Interp *interp,
			    int objc, Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclFileCopyCmd(Tcl_Interp *interp,
			    int objc, Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclFileDeleteCmd(Tcl_Interp *interp,
			    int objc, Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclFileMakeDirsCmd(Tcl_Interp *interp,
			    int objc, Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclFileRenameCmd(Tcl_Interp *interp,
			    int objc, Tcl_Obj *CONST objv[]);
MODULE_SCOPE void	TclFinalizeAllocSubsystem(void);
MODULE_SCOPE void	TclFinalizeAsync(void);
MODULE_SCOPE void	TclFinalizeCompilation(void);
MODULE_SCOPE void	TclFinalizeDoubleConversion(void);
MODULE_SCOPE void	TclFinalizeEncodingSubsystem(void);
MODULE_SCOPE void	TclFinalizeEnvironment(void);
MODULE_SCOPE void	TclFinalizeExecution(void);
MODULE_SCOPE void	TclFinalizeIOSubsystem(void);
MODULE_SCOPE void	TclFinalizeFilesystem(void);
MODULE_SCOPE void	TclResetFilesystem(void);
MODULE_SCOPE void	TclFinalizeLoad(void);
MODULE_SCOPE void	TclFinalizeLock(void);
MODULE_SCOPE void	TclFinalizeMemorySubsystem(void);
MODULE_SCOPE void	TclFinalizeNotifier(void);
MODULE_SCOPE void	TclFinalizeObjects(void);
MODULE_SCOPE void	TclFinalizePreserve(void);
MODULE_SCOPE void	TclFinalizeSynchronization(void);
MODULE_SCOPE void	TclFinalizeThreadAlloc(void);
MODULE_SCOPE void	TclFinalizeThreadData(void);
MODULE_SCOPE double	TclFloor(mp_int *a);
MODULE_SCOPE void	TclFormatNaN(double value, char *buffer);
MODULE_SCOPE int	TclFSFileAttrIndex(Tcl_Obj *pathPtr,
			    CONST char *attributeName, int *indexPtr);
MODULE_SCOPE Tcl_Obj *	TclGetBgErrorHandler(Tcl_Interp *interp);
MODULE_SCOPE int	TclGetNumberFromObj(Tcl_Interp *interp,
			    Tcl_Obj *objPtr, ClientData *clientDataPtr,
			    int *typePtr);
MODULE_SCOPE int	TclGetOpenModeEx(Tcl_Interp *interp,
			    CONST char *modeString, int *seekFlagPtr,
			    int *binaryPtr);
MODULE_SCOPE Tcl_Obj *	TclGetProcessGlobalValue(ProcessGlobalValue *pgvPtr);
MODULE_SCOPE int	TclGlob(Tcl_Interp *interp, char *pattern,
			    Tcl_Obj *unquotedPrefix, int globFlags,
			    Tcl_GlobTypeData *types);
MODULE_SCOPE int	TclIncrObj(Tcl_Interp *interp, Tcl_Obj *valuePtr,
			    Tcl_Obj *incrPtr);
MODULE_SCOPE Tcl_Obj *	TclIncrObjVar2(Tcl_Interp *interp, Tcl_Obj *part1Ptr,
			    Tcl_Obj *part2Ptr, Tcl_Obj *incrPtr, int flags);
MODULE_SCOPE void	TclInitAlloc(void);
MODULE_SCOPE void	TclInitDbCkalloc(void);
MODULE_SCOPE void	TclInitDoubleConversion(void);
MODULE_SCOPE void	TclInitEmbeddedConfigurationInformation(
			    Tcl_Interp *interp);
MODULE_SCOPE void	TclInitEncodingSubsystem(void);
MODULE_SCOPE void	TclInitIOSubsystem(void);
MODULE_SCOPE void	TclInitLimitSupport(Tcl_Interp *interp);
MODULE_SCOPE void	TclInitNamespaceSubsystem(void);
MODULE_SCOPE void	TclInitNotifier(void);
MODULE_SCOPE void	TclInitObjSubsystem(void);
MODULE_SCOPE void	TclInitSubsystems(void);
MODULE_SCOPE int	TclInterpReady(Tcl_Interp *interp);
MODULE_SCOPE int	TclIsLocalScalar(CONST char *src, int len);
MODULE_SCOPE int	TclJoinThread(Tcl_ThreadId id, int *result);
MODULE_SCOPE void	TclLimitRemoveAllHandlers(Tcl_Interp *interp);
MODULE_SCOPE Tcl_Obj *	TclLindexList(Tcl_Interp *interp,
			    Tcl_Obj *listPtr, Tcl_Obj *argPtr);
MODULE_SCOPE Tcl_Obj *	TclLindexFlat(Tcl_Interp *interp, Tcl_Obj *listPtr,
			    int indexCount, Tcl_Obj *CONST indexArray[]);
/* TIP #280 */
MODULE_SCOPE void       TclListLines (CONST char* listStr, int line,
				      int n, int* lines);
MODULE_SCOPE Tcl_Obj *	TclListObjCopy(Tcl_Interp *interp, Tcl_Obj *listPtr);
MODULE_SCOPE int	TclLoadFile(Tcl_Interp *interp, Tcl_Obj *pathPtr,
			    int symc, CONST char *symbols[],
			    Tcl_PackageInitProc **procPtrs[],
			    Tcl_LoadHandle *handlePtr,
			    ClientData *clientDataPtr,
			    Tcl_FSUnloadFileProc **unloadProcPtr);
MODULE_SCOPE Tcl_Obj *	TclLsetList(Tcl_Interp *interp, Tcl_Obj *listPtr,
			    Tcl_Obj *indexPtr, Tcl_Obj *valuePtr);
MODULE_SCOPE Tcl_Obj *	TclLsetFlat(Tcl_Interp *interp, Tcl_Obj *listPtr,
			    int indexCount, Tcl_Obj *CONST indexArray[],
			    Tcl_Obj *valuePtr);
MODULE_SCOPE int        TclMarkList (Tcl_Interp *interp, CONST char *list,
				     CONST char* end, int *argcPtr,
				     CONST int** argszPtr, CONST char ***argvPtr);
MODULE_SCOPE int	TclMergeReturnOptions(Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[], Tcl_Obj **optionsPtrPtr,
			    int *codePtr, int *levelPtr);
MODULE_SCOPE int	TclNokia770Doubles();
MODULE_SCOPE int	TclObjInvokeNamespace(Tcl_Interp *interp,
			    int objc, Tcl_Obj *CONST objv[],
			    Tcl_Namespace *nsPtr, int flags);
MODULE_SCOPE int	TclParseBackslash(CONST char *src,
			    int numBytes, int *readPtr, char *dst);
MODULE_SCOPE int	TclParseHex(CONST char *src, int numBytes,
			    Tcl_UniChar *resultPtr);
MODULE_SCOPE int	TclParseNumber(Tcl_Interp *interp, Tcl_Obj *objPtr,
			    CONST char *expected, CONST char *bytes,
			    int numBytes, CONST char **endPtrPtr, int flags);
MODULE_SCOPE void	TclParseInit(Tcl_Interp *interp, CONST char *string,
			    int numBytes, Tcl_Parse *parsePtr);
#if 0
MODULE_SCOPE int	TclParseInteger(CONST char *string, int numBytes);
#endif
MODULE_SCOPE int	TclParseAllWhiteSpace(CONST char *src, int numBytes);
MODULE_SCOPE int	TclProcessReturn(Tcl_Interp *interp,
			    int code, int level, Tcl_Obj *returnOpts);
MODULE_SCOPE int	TclpObjLstat(Tcl_Obj *pathPtr, Tcl_StatBuf *buf);
MODULE_SCOPE int	TclpCheckStackSpace(void);
MODULE_SCOPE Tcl_Obj *	TclpTempFileName(void);
MODULE_SCOPE Tcl_Obj *	TclNewFSPathObj(Tcl_Obj *dirPtr, CONST char *addStrRep,
			    int len);
MODULE_SCOPE int	TclpDeleteFile(CONST char *path);
MODULE_SCOPE void	TclpFinalizeCondition(Tcl_Condition *condPtr);
MODULE_SCOPE void	TclpFinalizeMutex(Tcl_Mutex *mutexPtr);
MODULE_SCOPE void	TclpFinalizePipes(void);
MODULE_SCOPE void	TclpFinalizeSockets _ANSI_ARGS_((void));
MODULE_SCOPE int	TclpThreadCreate(Tcl_ThreadId *idPtr,
			    Tcl_ThreadCreateProc proc, ClientData clientData,
			    int stackSize, int flags);
MODULE_SCOPE int	TclpFindVariable(CONST char *name, int *lengthPtr);
MODULE_SCOPE void	TclpInitLibraryPath(char **valuePtr,
			    int *lengthPtr, Tcl_Encoding *encodingPtr);
MODULE_SCOPE void	TclpInitLock(void);
MODULE_SCOPE void	TclpInitPlatform(void);
MODULE_SCOPE void	TclpInitUnlock(void);
MODULE_SCOPE int	TclpLoadFile(Tcl_Interp *interp, Tcl_Obj *pathPtr,
			    CONST char *sym1, CONST char *sym2,
			    Tcl_PackageInitProc **proc1Ptr,
			    Tcl_PackageInitProc **proc2Ptr,
			    ClientData *clientDataPtr,
			    Tcl_FSUnloadFileProc **unloadProcPtr);
MODULE_SCOPE Tcl_Obj *	TclpObjListVolumes(void);
MODULE_SCOPE void	TclpMasterLock(void);
MODULE_SCOPE void	TclpMasterUnlock(void);
MODULE_SCOPE int	TclpMatchFiles(Tcl_Interp *interp, char *separators,
			    Tcl_DString *dirPtr, char *pattern, char *tail);
MODULE_SCOPE int	TclpObjNormalizePath(Tcl_Interp *interp,
			    Tcl_Obj *pathPtr, int nextCheckpoint);
MODULE_SCOPE void	TclpNativeJoinPath(Tcl_Obj *prefix, char *joining);
MODULE_SCOPE Tcl_Obj *	TclpNativeSplitPath(Tcl_Obj *pathPtr, int *lenPtr);
MODULE_SCOPE Tcl_PathType TclpGetNativePathType(Tcl_Obj *pathPtr,
			    int *driveNameLengthPtr, Tcl_Obj **driveNameRef);
MODULE_SCOPE int 	TclCrossFilesystemCopy(Tcl_Interp *interp,
			    Tcl_Obj *source, Tcl_Obj *target);
MODULE_SCOPE int	TclpMatchInDirectory(Tcl_Interp *interp,
			    Tcl_Obj *resultPtr, Tcl_Obj *pathPtr,
			    CONST char *pattern, Tcl_GlobTypeData *types);
MODULE_SCOPE ClientData	TclpGetNativeCwd(ClientData clientData);
MODULE_SCOPE Tcl_FSDupInternalRepProc TclNativeDupInternalRep;
MODULE_SCOPE Tcl_Obj*	TclpObjLink(Tcl_Obj *pathPtr, Tcl_Obj *toPtr,
			    int linkType);
MODULE_SCOPE int	TclpObjChdir(Tcl_Obj *pathPtr);
MODULE_SCOPE Tcl_Obj *	TclPathPart(Tcl_Interp *interp, Tcl_Obj *pathPtr,
			    Tcl_PathPart portion);
MODULE_SCOPE void	TclpPanic(CONST char *format, ...);
MODULE_SCOPE char *	TclpReadlink(CONST char *fileName,
			    Tcl_DString *linkPtr);
MODULE_SCOPE void	TclpReleaseFile(TclFile file);
MODULE_SCOPE void	TclpSetInterfaces(void);
MODULE_SCOPE void	TclpSetVariables(Tcl_Interp *interp);
MODULE_SCOPE void	TclpUnloadFile(Tcl_LoadHandle loadHandle);
MODULE_SCOPE void *	TclpThreadDataKeyGet(Tcl_ThreadDataKey *keyPtr);
MODULE_SCOPE void	TclpThreadDataKeySet(Tcl_ThreadDataKey *keyPtr,
			    void *data);
MODULE_SCOPE void	TclpThreadExit(int status);
MODULE_SCOPE int	TclpThreadGetStackSize(void);
MODULE_SCOPE void	TclRememberCondition(Tcl_Condition *mutex);
MODULE_SCOPE void	TclRememberJoinableThread(Tcl_ThreadId id);
MODULE_SCOPE void	TclRememberMutex(Tcl_Mutex *mutex);
MODULE_SCOPE void	TclRemoveScriptLimitCallbacks(Tcl_Interp *interp);
MODULE_SCOPE void	TclSetBgErrorHandler(Tcl_Interp *interp,
			    Tcl_Obj *cmdPrefix);
MODULE_SCOPE void	TclSetBignumIntRep (Tcl_Obj *objPtr,
			    mp_int *bignumValue);
MODULE_SCOPE void	TclSetProcessGlobalValue(ProcessGlobalValue *pgvPtr,
			    Tcl_Obj *newValue, Tcl_Encoding encoding);
MODULE_SCOPE void	TclSignalExitThread(Tcl_ThreadId id, int result);
MODULE_SCOPE Tcl_Obj *	TclStringObjReverse(Tcl_Obj *objPtr);
MODULE_SCOPE int	TclSubstTokens(Tcl_Interp *interp, Tcl_Token *tokenPtr,
			    int count, int *tokensLeftPtr, int line);
MODULE_SCOPE void	TclTransferResult(Tcl_Interp *sourceInterp, int result,
			    Tcl_Interp *targetInterp);
MODULE_SCOPE Tcl_Obj *	TclpNativeToNormalized(ClientData clientData);
MODULE_SCOPE Tcl_Obj *	TclpFilesystemPathType(Tcl_Obj *pathPtr);
MODULE_SCOPE Tcl_PackageInitProc *TclpFindSymbol(Tcl_Interp *interp,
			    Tcl_LoadHandle loadHandle, CONST char *symbol);
MODULE_SCOPE int	TclpDlopen(Tcl_Interp *interp, Tcl_Obj *pathPtr,
			    Tcl_LoadHandle *loadHandle,
			    Tcl_FSUnloadFileProc **unloadProcPtr);
MODULE_SCOPE int	TclpUtime(Tcl_Obj *pathPtr, struct utimbuf *tval);
#ifdef TCL_LOAD_FROM_MEMORY
MODULE_SCOPE void*	TclpLoadMemoryGetBuffer(Tcl_Interp *interp, int size);
MODULE_SCOPE int	TclpLoadMemory(Tcl_Interp *interp, void *buffer,
			    int size, int codeSize, Tcl_LoadHandle *loadHandle,
			    Tcl_FSUnloadFileProc **unloadProcPtr);
#endif
MODULE_SCOPE void	TclInitThreadStorage(void);
MODULE_SCOPE void	TclpFinalizeThreadDataThread(void);
MODULE_SCOPE void	TclFinalizeThreadStorage(void);
#ifdef TCL_WIDE_CLICKS
MODULE_SCOPE Tcl_WideInt TclpGetWideClicks(void);
MODULE_SCOPE Tcl_WideInt TclpWideClicksToNanoseconds(Tcl_WideInt clicks);
#endif

/*
 *----------------------------------------------------------------
 * Command procedures in the generic core:
 *----------------------------------------------------------------
 */

MODULE_SCOPE int	Tcl_AfterObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_AppendObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ApplyObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ArrayObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_BinaryObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_BreakObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_CaseObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_CatchObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_CdObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclChanPendingObjCmd(
			    ClientData clientData, Tcl_Interp *interp,
			    int objc, Tcl_Obj *CONST objv[]); /* TIP 287 */
MODULE_SCOPE int	TclChanTruncateObjCmd(
			    ClientData clientData, Tcl_Interp *interp,
			    int objc, Tcl_Obj *CONST objv[]);
MODULE_SCOPE void	TclClockInit(Tcl_Interp*);
MODULE_SCOPE int	TclClockOldscanObjCmd(
			    ClientData clientData, Tcl_Interp *interp,
			    int objc, Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_CloseObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ConcatObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ContinueObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE Tcl_TimerToken TclCreateAbsoluteTimerHandler(
			    Tcl_Time *timePtr, Tcl_TimerProc *proc,
			    ClientData clientData);
MODULE_SCOPE int	TclDefaultBgErrorHandlerObjCmd(
			    ClientData clientData, Tcl_Interp *interp,
			    int objc, Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_DictObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_EncodingObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_EofObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ErrorObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_EvalObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ExecObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ExitObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ExprObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_FblockedObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_FconfigureObjCmd(
			    ClientData clientData, Tcl_Interp *interp,
			    int objc, Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_FcopyObjCmd(ClientData dummy,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_FileObjCmd(ClientData dummy,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_FileEventObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_FlushObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ForObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ForeachObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_FormatObjCmd(ClientData dummy,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_GetsObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_GlobalObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_GlobObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_IfObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_IncrObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_InfoObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_InterpObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int argc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_JoinObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LappendObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LassignObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LindexObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LinsertObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LlengthObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ListObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LoadObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LrangeObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LrepeatObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LreplaceObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LreverseObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LsearchObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LsetObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_LsortObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_NamespaceObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_OpenObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_PackageObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_PidObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_PutsObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_PwdObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ReadObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_RegexpObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_RegsubObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_RenameObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ReturnObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_ScanObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_SeekObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_SetObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_SplitObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_SocketObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_SourceObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_StringObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_SubstObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_SwitchObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_TellObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_TimeObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_TraceObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_UnloadObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_UnsetObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_UpdateObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_UplevelObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_UpvarObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_VariableObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_VwaitObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	Tcl_WhileObjCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);

/*
 *----------------------------------------------------------------
 * Compilation procedures for commands in the generic core:
 *----------------------------------------------------------------
 */

MODULE_SCOPE int	TclCompileAppendCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileBreakCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileCatchCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileContinueCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileDictCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileExprCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileForCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileForeachCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileGlobalCmd(Tcl_Interp *interp, Tcl_Parse *parsePtr,
			    struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileIfCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileIncrCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileLappendCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileLassignCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileLindexCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileListCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileLlengthCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileLsetCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileNamespaceCmd(Tcl_Interp *interp,
	                    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileNoOp(Tcl_Interp *interp,
	                    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileRegexpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileReturnCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileSetCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileStringCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileSwitchCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileUpvarCmd(Tcl_Interp *interp,
	                    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileVariableCmd(Tcl_Interp *interp,
	                    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclCompileWhileCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);

MODULE_SCOPE int	TclInvertOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileInvertOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclNotOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileNotOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclAddOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileAddOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclMulOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileMulOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclAndOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileAndOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclOrOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileOrOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclXorOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileXorOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclPowOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompilePowOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclLshiftOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileLshiftOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclRshiftOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileRshiftOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclModOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileModOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclNeqOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileNeqOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclStrneqOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileStrneqOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclInOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileInOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclNiOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileNiOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclMinusOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileMinusOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclDivOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileDivOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclLessOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileLessOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclLeqOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileLeqOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclGreaterOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileGreaterOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclGeqOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileGeqOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclEqOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileEqOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);
MODULE_SCOPE int	TclStreqOpCmd(ClientData clientData,
			    Tcl_Interp *interp, int objc,
			    Tcl_Obj *CONST objv[]);
MODULE_SCOPE int	TclCompileStreqOpCmd(Tcl_Interp *interp,
			    Tcl_Parse *parsePtr, struct CompileEnv *envPtr);

/*
 * Functions defined in generic/tclVar.c and currenttly exported only for use
 * by the bytecode compiler and engine. Some of these could later be placed in
 * the public interface.
 */

MODULE_SCOPE Var *	TclLookupArrayElement(Tcl_Interp *interp,
			    CONST char *arrayName, CONST char *elName,
			    CONST int flags, CONST char *msg,
			    CONST int createPart1, CONST int createPart2,
			    Var *arrayPtr);
MODULE_SCOPE Tcl_Obj *	TclPtrGetVar(Tcl_Interp *interp,
			    Var *varPtr, Var *arrayPtr, CONST char *part1,
			    CONST char *part2, CONST int flags);
MODULE_SCOPE Tcl_Obj *	TclPtrSetVar(Tcl_Interp *interp,
			    Var *varPtr, Var *arrayPtr, CONST char *part1,
			    CONST char *part2, Tcl_Obj *newValuePtr,
			    CONST int flags);
MODULE_SCOPE Tcl_Obj *	TclPtrIncrObjVar (Tcl_Interp *interp,
			    Var *varPtr, Var *arrayPtr, CONST char *part1,
			    CONST char *part2, Tcl_Obj *incrPtr,
			    CONST int flags);
#if 0
MODULE_SCOPE Tcl_Obj *	TclPtrIncrVar(Tcl_Interp *interp,
			    Var *varPtr, Var *arrayPtr, CONST char *part1,
			    CONST char *part2, CONST long i, CONST int flags);
MODULE_SCOPE Tcl_Obj *	TclPtrIncrWideVar(Tcl_Interp *interp,
			    Var *varPtr, Var *arrayPtr, CONST char *part1,
			    CONST char *part2, CONST Tcl_WideInt i,
			    CONST int flags);
#endif
MODULE_SCOPE void	TclInvalidateNsPath(Namespace *nsPtr);

/*
 *----------------------------------------------------------------
 * Macros used by the Tcl core to create and release Tcl objects.
 * TclNewObj(objPtr) creates a new object denoting an empty string.
 * TclDecrRefCount(objPtr) decrements the object's reference count, and frees
 * the object if its reference count is zero. These macros are inline versions
 * of Tcl_NewObj() and Tcl_DecrRefCount(). Notice that the names differ in not
 * having a "_" after the "Tcl". Notice also that these macros reference their
 * argument more than once, so you should avoid calling them with an
 * expression that is expensive to compute or has side effects. The ANSI C
 * "prototypes" for these macros are:
 *
 * MODULE_SCOPE void	TclNewObj(Tcl_Obj *objPtr);
 * MODULE_SCOPE void	TclDecrRefCount(Tcl_Obj *objPtr);
 *
 * These macros are defined in terms of two macros that depend on memory
 * allocator in use: TclAllocObjStorage, TclFreeObjStorage. They are defined
 * below.
 *----------------------------------------------------------------
 */

#ifdef TCL_COMPILE_STATS
#  define TclIncrObjsAllocated() \
    tclObjsAlloced++
#  define TclIncrObjsFreed() \
    tclObjsFreed++
#else
#  define TclIncrObjsAllocated()
#  define TclIncrObjsFreed()
#endif /* TCL_COMPILE_STATS */

#ifndef TCL_MEM_DEBUG
# define TclNewObj(objPtr) \
    TclIncrObjsAllocated(); \
    TclAllocObjStorage(objPtr); \
    (objPtr)->refCount = 0; \
    (objPtr)->bytes    = tclEmptyStringRep; \
    (objPtr)->length   = 0; \
    (objPtr)->typePtr  = NULL

/*
 * Invalidate the string rep first so we can use the bytes value for our
 * pointer chain, and signal an obj deletion (as opposed to shimmering) with
 * 'length == -1'.
 * Use empty 'if ; else' to handle use in unbraced outer if/else conditions
 */

# define TclDecrRefCount(objPtr) \
    if (--(objPtr)->refCount > 0) ; else { \
	if (!(objPtr)->typePtr || !(objPtr)->typePtr->freeIntRepProc) { \
  	    if ((objPtr)->bytes \
	            && ((objPtr)->bytes != tclEmptyStringRep)) { \
	        ckfree((char *) (objPtr)->bytes); \
	    } \
            (objPtr)->length = -1; \
	    TclFreeObjStorage(objPtr); \
	    TclIncrObjsFreed(); \
	} else { \
	    TclFreeObj(objPtr); \
	} \
    }

#if defined(PURIFY)

/*
 * The PURIFY mode is like the regular mode, but instead of doing block
 * Tcl_Obj allocation and keeping a freed list for efficiency, it always
 * allocates and frees a single Tcl_Obj so that tools like Purify can better
 * track memory leaks
 */

#  define TclAllocObjStorage(objPtr) \
	(objPtr) = (Tcl_Obj *) Tcl_Alloc(sizeof(Tcl_Obj))

#  define TclFreeObjStorage(objPtr) \
	ckfree((char *) (objPtr))

#undef USE_THREAD_ALLOC
#elif defined(TCL_THREADS) && defined(USE_THREAD_ALLOC)

/*
 * The TCL_THREADS mode is like the regular mode but allocates Tcl_Obj's from
 * per-thread caches.
 */

MODULE_SCOPE Tcl_Obj *	TclThreadAllocObj(void);
MODULE_SCOPE void	TclThreadFreeObj(Tcl_Obj *);
MODULE_SCOPE Tcl_Mutex *TclpNewAllocMutex(void);
MODULE_SCOPE void	TclFreeAllocCache(void *);
MODULE_SCOPE void *	TclpGetAllocCache(void);
MODULE_SCOPE void	TclpSetAllocCache(void *);
MODULE_SCOPE void	TclpFreeAllocMutex(Tcl_Mutex *mutex);
MODULE_SCOPE void	TclpFreeAllocCache(void *);

#  define TclAllocObjStorage(objPtr) \
	(objPtr) = TclThreadAllocObj()

#  define TclFreeObjStorage(objPtr) \
	TclThreadFreeObj((objPtr))

#else /* not PURIFY or USE_THREAD_ALLOC */

#ifdef TCL_THREADS
/* declared in tclObj.c */
MODULE_SCOPE Tcl_Mutex	tclObjMutex;
#endif

#  define TclAllocObjStorage(objPtr) \
	Tcl_MutexLock(&tclObjMutex); \
	if (tclFreeObjList == NULL) { \
	    TclAllocateFreeObjects(); \
	} \
	(objPtr) = tclFreeObjList; \
	tclFreeObjList = (Tcl_Obj *) \
		tclFreeObjList->internalRep.otherValuePtr; \
	Tcl_MutexUnlock(&tclObjMutex)

#  define TclFreeObjStorage(objPtr) \
	Tcl_MutexLock(&tclObjMutex); \
	(objPtr)->internalRep.otherValuePtr = (void *) tclFreeObjList; \
	tclFreeObjList = (objPtr); \
	Tcl_MutexUnlock(&tclObjMutex)
#endif

#else /* TCL_MEM_DEBUG */
MODULE_SCOPE void	TclDbInitNewObj(Tcl_Obj *objPtr);

# define TclDbNewObj(objPtr, file, line) \
    TclIncrObjsAllocated(); \
    (objPtr) = (Tcl_Obj *) Tcl_DbCkalloc(sizeof(Tcl_Obj), (file), (line)); \
    TclDbInitNewObj(objPtr);

# define TclNewObj(objPtr) \
    TclDbNewObj(objPtr, __FILE__, __LINE__);

# define TclDecrRefCount(objPtr) \
    Tcl_DbDecrRefCount(objPtr, __FILE__, __LINE__)

# define TclNewListObjDirect(objc, objv) \
    TclDbNewListObjDirect(objc, objv, __FILE__, __LINE__)

#undef USE_THREAD_ALLOC
#endif /* TCL_MEM_DEBUG */

/*
 *----------------------------------------------------------------
 * Macro used by the Tcl core to set a Tcl_Obj's string representation to a
 * copy of the "len" bytes starting at "bytePtr". This code works even if the
 * byte array contains NULLs as long as the length is correct. Because "len"
 * is referenced multiple times, it should be as simple an expression as
 * possible. The ANSI C "prototype" for this macro is:
 *
 * MODULE_SCOPE void TclInitStringRep(Tcl_Obj *objPtr, char *bytePtr, int len);
 *
 * This macro should only be called on an unshared objPtr where
 *  objPtr->typePtr->freeIntRepProc == NULL
 *----------------------------------------------------------------
 */

#define TclInitStringRep(objPtr, bytePtr, len) \
    if ((len) == 0) { \
	(objPtr)->bytes	 = tclEmptyStringRep; \
	(objPtr)->length = 0; \
    } else { \
	(objPtr)->bytes = (char *) ckalloc((unsigned) ((len) + 1)); \
	memcpy((void *) (objPtr)->bytes, (void *) (bytePtr), \
		(unsigned) (len)); \
	(objPtr)->bytes[len] = '\0'; \
	(objPtr)->length = (len); \
    }

/*
 *----------------------------------------------------------------
 * Macro used by the Tcl core to get the string representation's byte array
 * pointer from a Tcl_Obj. This is an inline version of Tcl_GetString(). The
 * macro's expression result is the string rep's byte pointer which might be
 * NULL. The bytes referenced by this pointer must not be modified by the
 * caller. The ANSI C "prototype" for this macro is:
 *
 * MODULE_SCOPE char *	TclGetString(Tcl_Obj *objPtr);
 *----------------------------------------------------------------
 */

#define TclGetString(objPtr) \
    ((objPtr)->bytes? (objPtr)->bytes : Tcl_GetString((objPtr)))

/*
 *----------------------------------------------------------------
 * Macro used by the Tcl core to clean out an object's internal
 * representation. Does not actually reset the rep's bytes. The ANSI C
 * "prototype" for this macro is:
 *
 * MODULE_SCOPE void	TclFreeIntRep(Tcl_Obj *objPtr);
 *----------------------------------------------------------------
 */

#define TclFreeIntRep(objPtr) \
    if ((objPtr)->typePtr != NULL && \
	    (objPtr)->typePtr->freeIntRepProc != NULL) { \
	(objPtr)->typePtr->freeIntRepProc(objPtr); \
    }

/*
 *----------------------------------------------------------------
 * Macro used by the Tcl core to clean out an object's string representation.
 * The ANSI C "prototype" for this macro is:
 *
 * MODULE_SCOPE void	TclInvalidateStringRep(Tcl_Obj *objPtr);
 *----------------------------------------------------------------
 */

#define TclInvalidateStringRep(objPtr) \
    if (objPtr->bytes != NULL) { \
	if (objPtr->bytes != tclEmptyStringRep) {\
	    ckfree((char *) objPtr->bytes);\
	}\
	objPtr->bytes = NULL;\
    }\


#if 0
/*
 *----------------------------------------------------------------
 * Macro used by the Tcl core to get a Tcl_WideInt value out of a Tcl_Obj of
 * the "wideInt" type.  
 *----------------------------------------------------------------
 */

#ifndef NO_WIDE_TYPE
#    define TclGetWide(resultVar, objPtr) \
	(resultVar) = (objPtr)->internalRep.wideValue
#    define TclGetLongFromWide(resultVar, objPtr) \
	(resultVar) = Tcl_WideAsLong((objPtr)->internalRep.wideValue)
#endif
#endif

/*
 *----------------------------------------------------------------
 * Macro used by the Tcl core get a unicode char from a utf string. It checks
 * to see if we have a one-byte utf char before calling the real
 * Tcl_UtfToUniChar, as this will save a lot of time for primarily ascii
 * string handling. The macro's expression result is 1 for the 1-byte case or
 * the result of Tcl_UtfToUniChar. The ANSI C "prototype" for this macro is:
 *
 * MODULE_SCOPE int	TclUtfToUniChar(CONST char *string, Tcl_UniChar *ch);
 *----------------------------------------------------------------
 */

#define TclUtfToUniChar(str, chPtr) \
	((((unsigned char) *(str)) < 0xC0) ? \
	    ((*(chPtr) = (Tcl_UniChar) *(str)), 1) \
	    : Tcl_UtfToUniChar(str, chPtr))

/*
 *----------------------------------------------------------------
 * Macro used by the Tcl core to compare Unicode strings. On big-endian
 * systems we can use the more efficient memcmp, but this would not be
 * lexically correct on little-endian systems. The ANSI C "prototype" for
 * this macro is:
 *
 * MODULE_SCOPE int	TclUniCharNcmp(CONST Tcl_UniChar *cs,
 *			    CONST Tcl_UniChar *ct, unsigned long n);
 *----------------------------------------------------------------
 */

#ifdef WORDS_BIGENDIAN
#   define TclUniCharNcmp(cs,ct,n) memcmp((cs),(ct),(n)*sizeof(Tcl_UniChar))
#else /* !WORDS_BIGENDIAN */
#   define TclUniCharNcmp Tcl_UniCharNcmp
#endif /* WORDS_BIGENDIAN */

/*
 *----------------------------------------------------------------
 * Macro used by the Tcl core to increment a namespace's export export epoch
 * counter. The ANSI C "prototype" for this macro is:
 *
 * MODULE_SCOPE void	TclInvalidateNsCmdLookup(Namespace *nsPtr);
 *----------------------------------------------------------------
 */

#define TclInvalidateNsCmdLookup(nsPtr) \
    if ((nsPtr)->numExportPatterns) { \
	(nsPtr)->exportLookupEpoch++; \
    }

/*
 *----------------------------------------------------------------------
 *
 * Core procedures added to libtommath for bignum manipulation.
 *
 *----------------------------------------------------------------------
 */

MODULE_SCOPE int	TclTommath_Init(Tcl_Interp *interp);
MODULE_SCOPE void	TclBNInitBignumFromLong(mp_int *bignum, long initVal);
MODULE_SCOPE void	TclBNInitBignumFromWideInt(mp_int *bignum,
			    Tcl_WideInt initVal);
MODULE_SCOPE void	TclBNInitBignumFromWideUInt(mp_int *bignum,
			    Tcl_WideUInt initVal);

/*
 *----------------------------------------------------------------
 * Macro used by the Tcl core to check whether a pattern has any characters
 * special to [string match]. The ANSI C "prototype" for this macro is:
 *
 * MODULE_SCOPE int	TclMatchIsTrivial(CONST char *pattern);
 *----------------------------------------------------------------
 */

#define TclMatchIsTrivial(pattern)	strpbrk((pattern), "*[]]?\\") == NULL

/*
 *----------------------------------------------------------------
 * Macro used by the Tcl core to write the string rep of a long integer to a
 * character buffer. The ANSI C "prototype" for this macro is:
 *
 * MODULE_SCOPE int	TclFormatInt(char *buf, long n);
 *----------------------------------------------------------------
 */

#define TclFormatInt(buf, n)		sprintf((buf), "%ld", (long)(n))

/*
 *----------------------------------------------------------------
 * Macros used by the Tcl core to set a Tcl_Obj's numeric representation
 * avoiding the corresponding function calls in time critical parts of the
 * core. They should only be called on unshared objects. The ANSI C
 * "prototypes" for these macros are:
 *
 * MODULE_SCOPE void	TclSetIntObj(Tcl_Obj *objPtr, int intValue);
 * MODULE_SCOPE void	TclSetLongObj(Tcl_Obj *objPtr, long longValue);
 * MODULE_SCOPE void	TclSetBooleanObj(Tcl_Obj *objPtr, long boolValue);
 * MODULE_SCOPE void	TclSetWideIntObj(Tcl_Obj *objPtr, Tcl_WideInt w);
 * MODULE_SCOPE void	TclSetDoubleObj(Tcl_Obj *objPtr, double d);
 *----------------------------------------------------------------
 */

#define TclSetIntObj(objPtr, i) \
    TclInvalidateStringRep(objPtr);\
    TclFreeIntRep(objPtr); \
    (objPtr)->internalRep.longValue = (long)(i); \
    (objPtr)->typePtr = &tclIntType

#define TclSetLongObj(objPtr, l) \
    TclSetIntObj((objPtr), (l))

/*
 * NOTE: There is to be no such thing as a "pure" boolean. Boolean values set
 * programmatically go straight to being "int" Tcl_Obj's, with value 0 or 1.
 * The only "boolean" Tcl_Obj's shall be those holding the cached boolean
 * value of strings like: "yes", "no", "true", "false", "on", "off".
 */

#define TclSetBooleanObj(objPtr, b) \
    TclSetIntObj((objPtr), ((b)? 1 : 0));

#ifndef NO_WIDE_TYPE
#define TclSetWideIntObj(objPtr, w) \
    TclInvalidateStringRep(objPtr);\
    TclFreeIntRep(objPtr); \
    (objPtr)->internalRep.wideValue = (Tcl_WideInt)(w); \
    (objPtr)->typePtr = &tclWideIntType
#endif

#define TclSetDoubleObj(objPtr, d) \
    TclInvalidateStringRep(objPtr);\
    TclFreeIntRep(objPtr); \
    (objPtr)->internalRep.doubleValue = (double)(d); \
    (objPtr)->typePtr = &tclDoubleType

/*
 *----------------------------------------------------------------
 * Macros used by the Tcl core to create and initialise objects of standard
 * types, avoiding the corresponding function calls in time critical parts of
 * the core. The ANSI C "prototypes" for these macros are:
 *
 * MODULE_SCOPE void	TclNewIntObj(Tcl_Obj *objPtr, int i);
 * MODULE_SCOPE void	TclNewLongObj(Tcl_Obj *objPtr, long l);
 * MODULE_SCOPE void	TclNewBooleanObj(Tcl_Obj *objPtr, int b);
 * MODULE_SCOPE void	TclNewWideObj(Tcl_Obj *objPtr, Tcl_WideInt w);
 * MODULE_SCOPE void	TclNewDoubleObj(Tcl_Obj *objPtr, double d);
 * MODULE_SCOPE void	TclNewStringObj(Tcl_Obj *objPtr, char *s, int len);
 * MODULE_SCOPE void	TclNewLiteralStringObj(Tcl_Obj*objPtr, char*sLiteral);
 *
 *----------------------------------------------------------------
 */

#ifndef TCL_MEM_DEBUG
#define TclNewIntObj(objPtr, i) \
    TclIncrObjsAllocated(); \
    TclAllocObjStorage(objPtr); \
    (objPtr)->refCount = 0; \
    (objPtr)->bytes = NULL; \
    (objPtr)->internalRep.longValue = (long)(i); \
    (objPtr)->typePtr = &tclIntType

#define TclNewLongObj(objPtr, l) \
    TclNewIntObj((objPtr), (l))

/*
 * NOTE: There is to be no such thing as a "pure" boolean.
 * See comment above TclSetBooleanObj macro above.
 */
#define TclNewBooleanObj(objPtr, b) \
    TclNewIntObj((objPtr), ((b)? 1 : 0))

#define TclNewDoubleObj(objPtr, d) \
    TclIncrObjsAllocated(); \
    TclAllocObjStorage(objPtr); \
    (objPtr)->refCount = 0; \
    (objPtr)->bytes = NULL; \
    (objPtr)->internalRep.doubleValue = (double)(d); \
    (objPtr)->typePtr = &tclDoubleType

#define TclNewStringObj(objPtr, s, len) \
    TclNewObj(objPtr); \
    TclInitStringRep((objPtr), (s), (len))

#else /* TCL_MEM_DEBUG */
#define TclNewIntObj(objPtr, i)   \
    (objPtr) = Tcl_NewIntObj(i)

#define TclNewLongObj(objPtr, l) \
    (objPtr) = Tcl_NewLongObj(l)

#define TclNewBooleanObj(objPtr, b) \
    (objPtr) = Tcl_NewBooleanObj(b)

#define TclNewDoubleObj(objPtr, d) \
    (objPtr) = Tcl_NewDoubleObj(d)

#define TclNewStringObj(objPtr, s, len) \
    (objPtr) = Tcl_NewStringObj((s), (len))
#endif /* TCL_MEM_DEBUG */

/*
 * The sLiteral argument *must* be a string literal; the incantation with
 * sizeof(sLiteral "") will fail to compile otherwise.
 */
#define TclNewLiteralStringObj(objPtr, sLiteral) \
    TclNewStringObj((objPtr), (sLiteral), (int) (sizeof(sLiteral "") - 1))

/*
 *----------------------------------------------------------------
 * Macros used by the Tcl core to test for some special double values.
 * The ANSI C "prototypes" for these macros are:
 *
 * MODULE_SCOPE int	TclIsInfinite(double d);
 * MODULE_SCOPE int	TclIsNaN(double d);
 */

#ifdef _MSC_VER
#define TclIsInfinite(d)	( ! (_finite((d))) )
#define TclIsNaN(d)		(_isnan((d)))
#else
#define TclIsInfinite(d)	( (d) > DBL_MAX || (d) < -DBL_MAX )
#define TclIsNaN(d)		((d) != (d))
#endif

#include "tclPort.h"
#include "tclIntDecls.h"
#include "tclIntPlatDecls.h"
#include "tclTomMathDecls.h"

#endif /* _TCLINT */

/*
 * Local Variables:
 * mode: c
 * c-basic-offset: 4
 * fill-column: 78
 * End:
 */