path: root/tests/socket.test

# Commands tested in this file: socket.
#
# This file contains a collection of tests for one or more of the Tcl built-in
# commands. Sourcing this file into Tcl runs the tests and generates output
# for errors. No output means no errors were found.
#
# Copyright (c) 1994-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-2000 Ajuba Solutions.
#
# See the file "license.terms" for information on usage and redistribution of
# this file, and for a DISCLAIMER OF ALL WARRANTIES.

# Running socket tests with a remote server:
# ------------------------------------------
#
# Some tests in socket.test depend on the existence of a remote server to
# which they connect. The remote server must be an instance of tcltest and it
# must run the script found in the file "remote.tcl" in this directory. You
# can start the remote server on any machine reachable from the machine on
# which you want to run the socket tests, by issuing:
#
#     tcltest remote.tcl -port 2048	# Or choose another port number.
#
# If the machine you are running the remote server on has several IP
# interfaces, you can choose which interface the server listens on for
# connections by specifying the -address command line flag, so:
#
#     tcltest remote.tcl -address your.machine.com
#
# These options can also be set by environment variables. On Unix, you can
# type these commands to the shell from which the remote server is started:
#
#     shell% setenv serverPort 2048
#     shell% setenv serverAddress your.machine.com
#
# and subsequently you can start the remote server with:
#
#     tcltest remote.tcl
#
# to have it listen on port 2048 on the interface your.machine.com.
#
# When the server starts, it prints out a detailed message containing its
# configuration information, and it will block until killed with a Ctrl-C.
# Once the remote server exists, you can run the tests in socket.test with the
# server by setting two Tcl variables:
#
#     % set remoteServerIP <name or address of machine on which server runs>
#     % set remoteServerPort 2048
#
# These variables are also settable from the environment. On Unix, you can:
#
#     shell% setenv remoteServerIP machine.where.server.runs
#     shell% senetv remoteServerPort 2048
#
# The preamble of the socket.test file checks to see if the variables are set
# either in Tcl or in the environment; if they are, it attempts to connect to
# the server. If the connection is successful, the tests using the remote
# server will be performed; otherwise, it will attempt to start the remote
# server (via exec) on platforms that support this, on the local host,
# listening at port 2048. If all fails, a message is printed and the tests
# using the remote server are not performed.

package require tcltest 2
namespace import -force ::tcltest::*

# Some tests require the testthread and exec commands
testConstraint testthread [llength [info commands testthread]]
testConstraint exec [llength [info commands exec]]

# Produce a random port number in the Dynamic/Private range
# from 49152 through 65535.
proc randport {} { expr {int(rand()*16383+49152)} }

# If remoteServerIP or remoteServerPort are not set, check in the environment
# variables for externally set values.
#

if {![info exists remoteServerIP]} {
    if {[info exists env(remoteServerIP)]} {
	set remoteServerIP $env(remoteServerIP)
    }
}
if {![info exists remoteServerPort]} {
    if {[info exists env(remoteServerPort)]} {
	set remoteServerPort $env(remoteServerPort)
    } else {
        if {[info exists remoteServerIP]} {
	    set remoteServerPort 2048
        }
    }
}

if 0 {
    # activate this to time the tests
    proc test {args} {
        set name [lindex $args 0]
        puts "[lindex [time {uplevel [linsert $args 0 tcltest::test]}] 0] @@@ $name"
    }
}

foreach {af localhost} {
    any 127.0.0.1
    inet 127.0.0.1
    inet6 ::1
} {
    set ::tcl::unsupported::socketAF $af
    # Check if the family is supported and set the constraint accordingly
    testConstraint supported_$af [expr {![catch {socket -server foo 0} sock]}]
    catch {close $sock}
    
#
# Check if we're supposed to do tests against the remote server
#

set doTestsWithRemoteServer 1
if {![info exists remoteServerIP]} {
    set remoteServerIP $localhost
}
if {($doTestsWithRemoteServer == 1) && (![info exists remoteServerPort])} {
    set remoteServerPort [randport]
}

# Attempt to connect to a remote server if one is already running. If it is
# not running or for some other reason the connect fails, attempt to start the
# remote server on the local host listening on port 2048. This is only done on
# platforms that support exec (i.e. not on the Mac). On platforms that do not
# support exec, the remote server must be started by the user before running
# the tests.

set remoteProcChan ""
set commandSocket ""
if {$doTestsWithRemoteServer} {
    catch {close $commandSocket}
    if {![catch {
	set commandSocket [socket $remoteServerIP $remoteServerPort]
    }]} then {
	fconfigure $commandSocket -translation crlf -buffering line
    } elseif {![testConstraint exec]} {
	set noRemoteTestReason "can't exec"
	set doTestsWithRemoteServer 0
    } else {
	set remoteServerIP $localhost
	# Be *extra* careful in case this file is sourced from
	# a directory other than the current one...
	set remoteFile [file join [pwd] [file dirname [info script]] \
		remote.tcl]
	if {![catch {
	    set remoteProcChan [open "|[list \
		    [interpreter] $remoteFile -serverIsSilent \
		    -port $remoteServerPort -address $remoteServerIP]" w+]
	} msg]} then {
	    gets $remoteProcChan
	    if {[catch {
		set commandSocket [socket $remoteServerIP $remoteServerPort]
	    } msg] == 0} then {
		fconfigure $commandSocket -translation crlf -buffering line
	    } else {
		set noRemoteTestReason $msg
		set doTestsWithRemoteServer 0
	    }
	} else {
	    set noRemoteTestReason "$msg [interpreter]"
	    set doTestsWithRemoteServer 0
	}
    }
}

# Some tests are run only if we are doing testing against a remote server.
testConstraint doTestsWithRemoteServer $doTestsWithRemoteServer
if {!$doTestsWithRemoteServer} {
    if {[string first s $::tcltest::verbose] != -1} {
    	puts "Skipping tests with remote server. See tests/socket.test for"
	puts "information on how to run remote server."
	puts "Reason for not doing remote tests: $noRemoteTestReason"
    }
}

#
# If we do the tests, define a command to send a command to the remote server.
#

if {[testConstraint doTestsWithRemoteServer]} {
    proc sendCommand {c} {
	global commandSocket

	if {[eof $commandSocket]} {
	    error "remote server disappeared"
	}
	if {[catch {puts $commandSocket $c} msg]} {
	    error "remote server disappaered: $msg"
	}
	if {[catch {puts $commandSocket "--Marker--Marker--Marker--"} msg]} {
	    error "remote server disappeared: $msg"
	}

	while {1} {
	    set line [gets $commandSocket]
	    if {[eof $commandSocket]} {
		error "remote server disappaered"
	    }
	    if {$line eq "--Marker--Marker--Marker--"} {
		lassign $result code info value
                return -code $code -errorinfo $info $value
	    }
            append result $line "\n"
	}
    }
}

proc getPort sock {
    lindex [fconfigure $sock -sockname] 2
}


# ----------------------------------------------------------------------

test socket_$af-1.1 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket -server
} -returnCodes error -result {no argument given for -server option}
test socket_$af-1.2 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket -server foo
} -returnCodes error -result {wrong # args: should be "socket ?-myaddr addr? ?-myport myport? ?-async? host port" or "socket -server command ?-myaddr addr? port"}
test socket_$af-1.3 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket -myaddr
} -returnCodes error -result {no argument given for -myaddr option}
test socket_$af-1.4 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket -myaddr $localhost
} -returnCodes error -result {wrong # args: should be "socket ?-myaddr addr? ?-myport myport? ?-async? host port" or "socket -server command ?-myaddr addr? port"}
test socket_$af-1.5 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket -myport
} -returnCodes error -result {no argument given for -myport option}
test socket_$af-1.6 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket -myport xxxx
} -returnCodes error -result {expected integer but got "xxxx"}
test socket_$af-1.7 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket -myport 2522
} -returnCodes error -result {wrong # args: should be "socket ?-myaddr addr? ?-myport myport? ?-async? host port" or "socket -server command ?-myaddr addr? port"}
test socket_$af-1.8 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket -froboz
} -returnCodes error -result {bad option "-froboz": must be -async, -myaddr, -myport, or -server}
test socket_$af-1.9 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket -server foo -myport 2521 3333
} -returnCodes error -result {option -myport is not valid for servers}
test socket_$af-1.10 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket host 2528 -junk
} -returnCodes error -result {wrong # args: should be "socket ?-myaddr addr? ?-myport myport? ?-async? host port" or "socket -server command ?-myaddr addr? port"}
test socket_$af-1.11 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket -server callback 2520 --
} -returnCodes error -result {wrong # args: should be "socket ?-myaddr addr? ?-myport myport? ?-async? host port" or "socket -server command ?-myaddr addr? port"}
test socket_$af-1.12 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket foo badport
} -returnCodes error -result {expected integer but got "badport"}
test socket_$af-1.13 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket -async -server
} -returnCodes error -result {cannot set -async option for server sockets}
test socket_$af-1.14 {arg parsing for socket command} -constraints [list socket supported_$af] -body {
    socket -server foo -async
} -returnCodes error -result {cannot set -async option for server sockets}

set path(script) [makeFile {} script]

test socket_$af-2.1 {tcp connection} -constraints [list socket supported_$af stdio] -setup {
    file delete $path(script)
    set f [open $path(script) w]
    puts $f {
	set timer [after 10000 "set x timed_out"]
	set f [socket -server accept 0]
	proc accept {file addr port} {
	    global x
	    set x done
            close $file
	}
	puts ready
	puts [lindex [fconfigure $f -sockname] 2]
	vwait x
	after cancel $timer
	close $f
	puts $x
    }
    close $f
    set f [open "|[list [interpreter] $path(script)]" r]
    gets $f x
    gets $f listen
} -body {
    # $x == "ready" at this point
    set sock [socket $localhost $listen]
    lappend x [gets $f]
    close $sock
    lappend x [gets $f]
} -cleanup {
    close $f
} -result {ready done {}}
test socket_$af-2.2 {tcp connection with client port specified} -setup {
    set port [randport]
    file delete $path(script)
    set f [open $path(script) w]
    puts $f {
	set timer [after 10000 "set x timeout"]
        set f [socket -server accept 0]
	proc accept {file addr port} {
            global x
            puts "[gets $file] $port"
            close $file
            set x done
	}
	puts ready
	puts [lindex [fconfigure $f -sockname] 2]
	vwait x
	after cancel $timer
	close $f
    }
    close $f
    set f [open "|[list [interpreter] $path(script)]" r]
    gets $f x
    gets $f listen
} -constraints [list socket supported_$af stdio] -body {
    # $x == "ready" at this point
    set sock [socket -myport $port $localhost $listen]
    puts $sock hello
    flush $sock
    lappend x [expr {[gets $f] eq "hello $port"}]
    close $sock
    return $x
} -cleanup {
    catch {close [socket $localhost $listen]}
    close $f
} -result {ready 1}
test socket_$af-2.3 {tcp connection with client interface specified} -setup {
    file delete $path(script)
    set f [open $path(script) w]
    puts $f {
	set timer [after 2000 "set x done"]
        set f [socket  -server accept 0]
	proc accept {file addr port} {
            global x
            puts "[gets $file] $addr"
            close $file
            set x done
	}
	puts [lindex [fconfigure $f -sockname] 2]
	puts ready
	vwait x
	after cancel $timer
	close $f
    }
    close $f
    set f [open "|[list [interpreter] $path(script)]" r]
    gets $f listen
    gets $f x
} -constraints [list socket supported_$af stdio] -body {
    # $x == "ready" at this point
    set sock [socket -myaddr $localhost $localhost $listen]
    puts $sock hello
    flush $sock
    lappend x [gets $f]
    close $sock
    return $x
} -cleanup {
    close $f
} -result [list ready [list hello $localhost]]
test socket_$af-2.4 {tcp connection with server interface specified} -setup {
    file delete $path(script)
    set f [open $path(script) w]
    puts $f [list set localhost $localhost]
    puts $f {
	set timer [after 2000 "set x done"]
        set f [socket -server accept -myaddr $localhost 0]
	proc accept {file addr port} {
            global x
            puts "[gets $file]"
            close $file
            set x done
	}
	puts ready
	puts [lindex [fconfigure $f -sockname] 2]
	vwait x
	after cancel $timer
	close $f
    }
    close $f
    set f [open "|[list [interpreter] $path(script)]" r]
    gets $f x
    gets $f listen
} -constraints [list socket supported_$af stdio] -body {
    # $x == "ready" at this point
    set sock [socket $localhost $listen]
    puts $sock hello
    flush $sock
    lappend x [gets $f]
    close $sock
    return $x
} -cleanup {
    close $f
} -result {ready hello}
test socket_$af-2.5 {tcp connection with redundant server port} -setup {
    file delete $path(script)
    set f [open $path(script) w]
    puts $f {
	set timer [after 10000 "set x timeout"]
        set f [socket -server accept 0]
	proc accept {file addr port} {
            global x
            puts "[gets $file]"
            close $file
            set x done
	}
	puts ready
	puts [lindex [fconfigure $f -sockname] 2]
	vwait x
	after cancel $timer
	close $f
    }
    close $f
    set f [open "|[list [interpreter] $path(script)]" r]
    gets $f x
    gets $f listen
} -constraints [list socket supported_$af stdio] -body {
    # $x == "ready" at this point
    set sock [socket $localhost $listen]
    puts $sock hello
    flush $sock
    lappend x [gets $f]
    close $sock
    return $x
} -cleanup {
    close $f
} -result {ready hello}
test socket_$af-2.6 {tcp connection} -constraints [list socket supported_$af] -body {
    set status ok
    if {![catch {set sock [socket $localhost [randport]]}]} {
	if {![catch {gets $sock}]} {
	    set status broken
	}
	close $sock
    }
    set status
} -result ok
test socket_$af-2.7 {echo server, one line} -constraints [list socket supported_$af stdio] -setup {
    file delete $path(script)
    set f [open $path(script) w]
    puts $f {
	set timer [after 10000 "set x timeout"]
	set f [socket -server accept 0]
	proc accept {s a p} {
            fileevent $s readable [list echo $s]
	    fconfigure $s -translation lf -buffering line
        }
	proc echo {s} {
	     set l [gets $s]
             if {[eof $s]} {
                 global x
                 close $s
                 set x done
             } else {
                 puts $s $l
             }
	}
	puts ready
	puts [lindex [fconfigure $f -sockname] 2]
	vwait x
	after cancel $timer
	close $f
	puts $x
    }
    close $f
    set f [open "|[list [interpreter] $path(script)]" r]
    gets $f
    gets $f listen
} -body {
    set s [socket $localhost $listen]
    fconfigure $s -buffering line -translation lf
    puts $s "hello abcdefghijklmnop"
    set x [gets $s]
    close $s
    list $x [gets $f]
} -cleanup {
    close $f
} -result {{hello abcdefghijklmnop} done}
removeFile script
test socket_$af-2.8 {echo server, loop 50 times, single connection} -setup {
    set path(script) [makeFile {
	set f [socket -server accept 0]
	proc accept {s a p} {
            fileevent $s readable [list echo $s]
            fconfigure $s -buffering line
        }
	proc echo {s} {
	     global i
             set l [gets $s]
             if {[eof $s]} {
                 global x
                 close $s
                 set x done
             } else {
	         incr i
                 puts $s $l
             }
	}
	set i 0
	puts ready
	puts [lindex [fconfigure $f -sockname] 2]
	set timer [after 20000 "set x done"]
	vwait x
	after cancel $timer
	close $f
	puts "done $i"
    } script]
    set f [open "|[list [interpreter] $path(script)]" r]
    gets $f
    gets $f listen
} -constraints [list socket supported_$af stdio] -body {
    set s [socket $localhost $listen]
    fconfigure $s -buffering line
    catch {
	for {set x 0} {$x < 50} {incr x} {
	    puts $s "hello abcdefghijklmnop"
	    gets $s
	}
    }
    close $s
    catch {set x [gets $f]}
    return $x
} -cleanup {
    close $f
    removeFile script
} -result {done 50}
set path(script) [makeFile {} script]
test socket_$af-2.9 {socket conflict} -constraints [list socket supported_$af stdio] -body {
    set s [socket -server accept 0]
    file delete $path(script)
    set f [open $path(script) w]
    puts $f [list set ::tcl::unsupported::socketAF $::tcl::unsupported::socketAF]
    puts $f "socket -server accept [lindex [fconfigure $s -sockname] 2]"
    close $f
    set f [open "|[list [interpreter] $path(script)]" r]
    gets $f
    after 100
    close $f
} -returnCodes error -cleanup {
    close $s
} -match glob -result {couldn't open socket: address already in use*}
test socket_$af-2.10 {close on accept, accepted socket lives} -setup {
    set done 0
    set timer [after 20000 "set done timed_out"]
} -constraints [list socket supported_$af] -body {
    set ss [socket -server accept 0]
    proc accept {s a p} {
	global ss
	close $ss
	fileevent $s readable "readit $s"
	fconfigure $s -trans lf
    }
    proc readit {s} {
	global done
	gets $s
	close $s
	set done 1
    }
    set cs [socket $localhost [lindex [fconfigure $ss -sockname] 2]]
    puts $cs hello
    close $cs
    vwait done
    return $done
} -cleanup {
    after cancel $timer
} -result 1
test socket_$af-2.11 {detecting new data} -constraints [list socket supported_$af] -setup {
    proc accept {s a p} {
	global sock
	set sock $s
    }
    set s [socket -server accept 0]
    set sock ""
} -body {
    set s2 [socket $localhost [lindex [fconfigure $s -sockname] 2]]
    vwait sock
    puts $s2 one
    flush $s2
    after idle {set x 1}
    vwait x
    fconfigure $sock -blocking 0
    set result a:[gets $sock]
    lappend result b:[gets $sock]
    fconfigure $sock -blocking 1
    puts $s2 two
    flush $s2
    after idle {set x 1}
    vwait x
    fconfigure $sock -blocking 0
    lappend result c:[gets $sock]
} -cleanup {
    fconfigure $sock -blocking 1
    close $s2
    close $s
    close $sock
} -result {a:one b: c:two}

test socket_$af-3.1 {socket conflict} -constraints [list socket supported_$af stdio] -setup {
    file delete $path(script)
    set f [open $path(script) w]
    puts $f [list set localhost $localhost]
    puts $f {
	set f [socket -server accept -myaddr $localhost 0]
	puts ready
	puts [lindex [fconfigure $f -sockname] 2]
	gets stdin
	close $f
    }
    close $f
    set f [open "|[list [interpreter] $path(script)]" r+]
    gets $f
    gets $f listen
} -body {
    socket -server accept -myaddr $localhost $listen
} -cleanup {
    puts $f bye
    close $f
} -returnCodes error -result {couldn't open socket: address already in use}
test socket_$af-3.2 {server with several clients} -setup {
    file delete $path(script)
    set f [open $path(script) w]
    puts $f [list set localhost $localhost]
    puts $f {
	set t1 [after 30000 "set x timed_out"]
	set t2 [after 31000 "set x timed_out"]
	set t3 [after 32000 "set x timed_out"]
	set counter 0
	set s [socket -server accept -myaddr $localhost 0]
	proc accept {s a p} {
	    fileevent $s readable [list echo $s]
	    fconfigure $s -buffering line
	}
	proc echo {s} {
	     global x
             set l [gets $s]
             if {[eof $s]} {
                 close $s
                 set x done
             } else {
                 puts $s $l
             }
	}
	puts ready
	puts [lindex [fconfigure $s -sockname] 2]
	vwait x
	after cancel $t1
	vwait x
	after cancel $t2
	vwait x
	after cancel $t3
	close $s
	puts $x
    }
    close $f
    set f [open "|[list [interpreter] $path(script)]" r+]
    set x [gets $f]
    gets $f listen
} -constraints [list socket supported_$af stdio] -body {
    # $x == "ready" here
    set s1 [socket $localhost $listen]
    fconfigure $s1 -buffering line
    set s2 [socket $localhost $listen]
    fconfigure $s2 -buffering line
    set s3 [socket $localhost $listen]
    fconfigure $s3 -buffering line
    for {set i 0} {$i < 100} {incr i} {
	puts $s1 hello,s1
	gets $s1
	puts $s2 hello,s2
	gets $s2
	puts $s3 hello,s3
	gets $s3
    }
    close $s1
    close $s2
    close $s3
    lappend x [gets $f]
} -cleanup {
    close $f
} -result {ready done}

test socket_$af-4.1 {server with several clients} -setup {
    file delete $path(script)
    set f [open $path(script) w]
    puts $f [list set localhost $localhost]
    puts $f {
	set port [gets stdin]
	set s [socket $localhost $port]
	fconfigure $s -buffering line
	for {set i 0} {$i < 100} {incr i} {
	    puts $s hello
	    gets $s
	}
	close $s
	puts bye
	gets stdin
    }
    close $f
    set p1 [open "|[list [interpreter] $path(script)]" r+]
    fconfigure $p1 -buffering line
    set p2 [open "|[list [interpreter] $path(script)]" r+]
    fconfigure $p2 -buffering line
    set p3 [open "|[list [interpreter] $path(script)]" r+]
    fconfigure $p3 -buffering line
} -constraints [list socket supported_$af stdio] -body {
    proc accept {s a p} {
	fconfigure $s -buffering line
	fileevent $s readable [list echo $s]
    }
    proc echo {s} {
	global x
        set l [gets $s]
        if {[eof $s]} {
            close $s
            set x done
        } else {
            puts $s $l
        }
    }
    set t1 [after 30000 "set x timed_out"]
    set t2 [after 31000 "set x timed_out"]
    set t3 [after 32000 "set x timed_out"]
    set s [socket -server accept -myaddr $localhost 0]
    set listen [lindex [fconfigure $s -sockname] 2]
    puts $p1 $listen
    puts $p2 $listen
    puts $p3 $listen
    vwait x
    vwait x
    vwait x
    after cancel $t1
    after cancel $t2
    after cancel $t3
    close $s
    set l ""
    lappend l [list p1 [gets $p1] $x]
    lappend l [list p2 [gets $p2] $x]
    lappend l [list p3 [gets $p3] $x]
} -cleanup {
    puts $p1 bye
    puts $p2 bye
    puts $p3 bye
    close $p1
    close $p2
    close $p3
} -result {{p1 bye done} {p2 bye done} {p3 bye done}}
test socket_$af-4.2 {byte order problems, socket numbers, htons} -body {
    close [socket -server dodo -myaddr $localhost 0x3000]
    return ok
} -constraints [list socket supported_$af] -result ok

test socket_$af-5.1 {byte order problems, socket numbers, htons} -body {
    if {![catch {socket -server dodo 0x1} msg]} {
	close $msg
        return {htons problem, should be disallowed, are you running as SU?}
    }
    return {couldn't open socket: not owner}
} -constraints [list socket supported_$af unix notRoot] -result {couldn't open socket: not owner}
test socket_$af-5.2 {byte order problems, socket numbers, htons} -body {
    if {![catch {socket -server dodo 0x10000} msg]} {
	close $msg
	return {port resolution problem, should be disallowed}
    }
    return {couldn't open socket: port number too high}
} -constraints [list socket supported_$af] -result {couldn't open socket: port number too high}
test socket_$af-5.3 {byte order problems, socket numbers, htons} -body {
    if {![catch {socket -server dodo 21} msg]} {
	close $msg
	return {htons problem, should be disallowed, are you running as SU?}
    }
    return {couldn't open socket: not owner}
} -constraints [list socket supported_$af unix notRoot] -result {couldn't open socket: not owner}

test socket_$af-6.1 {accept callback error} -constraints [list socket supported_$af stdio] -setup {
    proc myHandler {msg options} {
	variable x $msg
    }
    set handler [interp bgerror {}]
    interp bgerror {} [namespace which myHandler]
    file delete $path(script)
} -body {
    set f [open $path(script) w]
    puts $f [list set localhost $localhost]
    puts $f {
	gets stdin port
	socket $localhost $port
    }
    close $f
    set f [open "|[list [interpreter] $path(script)]" r+]
    proc accept {s a p} {expr 10 / 0}
    set s [socket -server accept -myaddr $localhost 0]
    puts $f [lindex [fconfigure $s -sockname] 2]
    close $f
    set timer [after 10000 "set x timed_out"]
    vwait x
    after cancel $timer
    close $s
    return $x
} -cleanup {
    interp bgerror {} $handler
} -result {divide by zero}

test socket_$af-6.2 {
    readable fileevent on server socket
} -setup {
    set sock [socket -server dummy 0]
} -body {
    fileevent $sock readable dummy
} -cleanup {
    close $sock
} -returnCodes 1 -result "channel is not readable"

test socket_$af-6.3 {writable fileevent on server socket} -setup {
    set sock [socket -server dummy 0]
} -body {
    fileevent $sock writable dummy
} -cleanup {
    close $sock
} -returnCodes 1 -result "channel is not writable"

test socket_$af-7.1 {testing socket specific options} -setup {
    file delete $path(script)
    set f [open $path(script) w]
    puts $f {
	set ss [socket -server accept 0]
	proc accept args {
	    global x
	    set x done
	}
	puts ready
	puts [lindex [fconfigure $ss -sockname] 2]
	set timer [after 10000 "set x timed_out"]
	vwait x
	after cancel $timer
    }
    close $f
    set f [open "|[list [interpreter] $path(script)]" r]
    gets $f
    gets $f listen
    set l ""
} -constraints [list socket supported_$af stdio] -body {
    set s [socket $localhost $listen]
    set p [fconfigure $s -peername]
    close $s
    lappend l [string compare [lindex $p 0] $localhost]
    lappend l [string compare [lindex $p 2] $listen]
    lappend l [llength $p]
} -cleanup {
    close $f
} -result {0 0 3}
test socket_$af-7.2 {testing socket specific options} -setup {
    file delete $path(script)
    set f [open $path(script) w]
    puts $f [list set ::tcl::unsupported::socketAF $::tcl::unsupported::socketAF]
    puts $f {
	set ss [socket -server accept 0]
	proc accept args {
	    global x
	    set x done
	}
	puts ready
	puts [lindex [fconfigure $ss -sockname] 2]
	set timer [after 10000 "set x timed_out"]
	vwait x
	after cancel $timer
    }
    close $f
    set f [open "|[list [interpreter] $path(script)]" r]
    gets $f
    gets $f listen
} -constraints [list socket supported_$af stdio] -body {
    set s [socket $localhost $listen]
    set p [fconfigure $s -sockname]
    close $s
    list [llength $p] \
	    [regexp {^(127\.0\.0\.1|0\.0\.0\.0|::1)$} [lindex $p 0]] \
	    [expr {[lindex $p 2] == $listen}]
} -cleanup {
    close $f
} -result {3 1 0}
test socket_$af-7.3 {testing socket specific options} -constraints [list socket supported_$af] -body {
    set s [socket -server accept -myaddr $localhost 0]
    set l [fconfigure $s]
    close $s
    update
    llength $l
} -result 14
test socket_$af-7.4 {testing socket specific options} -constraints [list socket supported_$af] -setup {
    set timer [after 10000 "set x timed_out"]
    set l ""
} -body {
    set s [socket -server accept -myaddr $localhost 0]
    proc accept {s a p} {
	global x
	set x [fconfigure $s -sockname]
	close $s
    }
    set listen [lindex [fconfigure $s -sockname] 2]
    set s1 [socket $localhost $listen]
    vwait x
    lappend l [expr {[lindex $x 2] == $listen}] [llength $x]
} -cleanup {
    after cancel $timer
    close $s
    close $s1
} -result {1 3}
test socket_$af-7.5 {testing socket specific options} -setup {
    set timer [after 10000 "set x timed_out"]
    set l ""
} -constraints [list socket supported_$af unixOrPc] -body {
    set s [socket -server accept 0]
    proc accept {s a p} {
	global x
	set x [fconfigure $s -sockname]
	close $s
    }
    set listen [lindex [fconfigure $s -sockname] 2]
    set s1 [socket $localhost $listen]
    vwait x
    lappend l [lindex $x 0] [expr {[lindex $x 2] == $listen}] [llength $x]
} -cleanup {
    after cancel $timer
    close $s
    close $s1
} -result [list $localhost 1 3]

test socket_$af-8.1 {testing -async flag on sockets} -constraints [list socket supported_$af] -body {
    # NOTE: This test may fail on some Solaris 2.4 systems. If it does, check
    # that you have these patches installed (using showrev -p):
    #
    # 101907-05, 101925-02, 101945-14, 101959-03, 101969-05, 101973-03,
    # 101977-03, 101981-02, 101985-01, 102001-03, 102003-01, 102007-01,
    # 102011-02, 102024-01, 102039-01, 102044-01, 102048-01, 102062-03,
    # 102066-04, 102070-01, 102105-01, 102153-03, 102216-01, 102232-01,
    # 101878-03, 101879-01, 101880-03, 101933-01, 101950-01, 102030-01,
    # 102057-08, 102140-01, 101920-02, 101921-09, 101922-07, 101923-03
    #
    # If after installing these patches you are still experiencing a problem,
    # please email jyl@eng.sun.com. We have not observed this failure on
    # Solaris 2.5, so another option (instead of installing these patches) is
    # to upgrade to Solaris 2.5.
    set s [socket -server accept -myaddr $localhost 0]
    proc accept {s a p} {
	global x
	puts $s bye
	close $s
	set x done
    }
    set s1 [socket -async $localhost [lindex [fconfigure $s -sockname] 2]]
    vwait x
    gets $s1
} -cleanup {
    close $s
    close $s1
} -result bye

test socket_$af-9.1 {testing spurious events} -constraints [list socket supported_$af] -setup {
    set len 0
    set spurious 0
    set done 0
    set timer [after 10000 "set done timed_out"]
} -body {
    proc readlittle {s} {
	global spurious done len
	set l [read $s 1]
	if {[string length $l] == 0} {
	    if {![eof $s]} {
		incr spurious
	    } else {
		close $s
		set done 1
	    }
	} else {
	    incr len [string length $l]
	}
    }
    proc accept {s a p} {
	fconfigure $s -buffering none -blocking off
	fileevent $s readable [list readlittle $s]
    }
    set s [socket -server accept -myaddr $localhost 0]
    set c [socket $localhost [lindex [fconfigure $s -sockname] 2]]
    puts -nonewline $c 01234567890123456789012345678901234567890123456789
    close $c
    vwait done
    close $s
    list $spurious $len
} -cleanup {
    after cancel $timer
} -result {0 50}
test socket_$af-9.2 {testing async write, fileevents, flush on close} -constraints [list socket supported_$af] -setup {
    set firstblock ""
    for {set i 0} {$i < 5} {incr i} {set firstblock "a$firstblock$firstblock"}
    set secondblock ""
    for {set i 0} {$i < 16} {incr i} {
	set secondblock "b$secondblock$secondblock"
    }
    set timer [after 10000 "set done timed_out"]
    set l [socket -server accept -myaddr $localhost 0]
    proc accept {s a p} {
	fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
		-buffering line
	fileevent $s readable "readable $s"
    }
    proc readable {s} {
	set l [gets $s]
	fileevent $s readable {}
	after idle respond $s
    }
    proc respond {s} {
	global firstblock
	puts -nonewline $s $firstblock
	after idle writedata $s
    }
    proc writedata {s} {
	global secondblock
	puts -nonewline $s $secondblock
	close $s
    }
} -body {
    set s [socket $localhost [lindex [fconfigure $l -sockname] 2]]
    fconfigure $s -blocking 0 -trans lf -buffering line
    set count 0
    puts $s hello
    proc readit {s} {
	global count done
	set l [read $s]
	incr count [string length $l]
	if {[eof $s]} {
	    close $s
	    set done 1
	}
    }
    fileevent $s readable "readit $s"
    vwait done
    return $count
} -cleanup {
    close $l
    after cancel $timer
} -result 65566
test socket_$af-9.3 {testing EOF stickyness} -constraints [list socket supported_$af] -setup {
    set count 0
    set done false
    proc write_then_close {s} {
	puts $s bye
	close $s
    }
    proc accept {s a p} {
	fconfigure $s -buffering line -translation lf
	fileevent $s writable "write_then_close $s"
    }
    set s [socket -server accept -myaddr $localhost 0]
} -body {
    proc count_to_eof {s} {
	global count done
	set l [gets $s]
	if {[eof $s]} {
	    incr count
	    if {$count > 9} {
		close $s
		set done true
		set count {eof is sticky}
	    }
	}
    }
    proc timerproc {s} {
	global done count
	set done true
	set count {timer went off, eof is not sticky}
	close $s
    }
    set c [socket $localhost [lindex [fconfigure $s -sockname] 2]]
    fconfigure $c -blocking off -buffering line -translation lf
    fileevent $c readable "count_to_eof $c"
    set timer [after 1000 timerproc $c]
    vwait done
    return $count
} -cleanup {
    close $s
    after cancel $timer
} -result {eof is sticky}

removeFile script

test socket_$af-10.1 {testing socket accept callback error handling} \
    -constraints [list socket supported_$af] -setup {
    variable goterror 0
    proc myHandler {msg options} {
	variable goterror 1
    }
    set handler [interp bgerror {}]
    interp bgerror {} [namespace which myHandler]
} -body {
    set s [socket -server accept -myaddr $localhost 0]
    proc accept {s a p} {close $s; error}
    set c [socket $localhost [lindex [fconfigure $s -sockname] 2]]
    vwait goterror
    close $s
    close $c
    return $goterror
} -cleanup {
    interp bgerror {} $handler
} -result 1

test socket_$af-11.1 {tcp connection} -setup {
    set port [sendCommand {
	set server [socket -server accept 0]
	proc accept {s a p} {
	    puts $s done
	    close $s
	}
	getPort $server
    }]
} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
    set s [socket $remoteServerIP $port]
    gets $s
} -cleanup {
    close $s
    sendCommand {close $server}
} -result done
test socket_$af-11.2 {client specifies its port} -setup {
    set lport [randport]
    set rport [sendCommand {
	set server [socket -server accept 0]
	proc accept {s a p} {
	    puts $s $p
	    close $s
	}
	getPort $server
    }]
} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
    set s [socket -myport $lport $remoteServerIP $rport]
    set r [gets $s]
    expr {$r==$lport ? "ok" : "broken: $r != $port"}
} -cleanup {
    close $s
    sendCommand {close $server}
} -result ok
test socket_$af-11.3 {trying to connect, no server} -body {
    set status ok
    if {![catch {set s [socket $remoteServerIp [randport]]}]} {
	if {![catch {gets $s}]} {
	    set status broken
	}
	close $s
    }
    return $status
} -constraints [list socket supported_$af doTestsWithRemoteServer] -result ok
test socket_$af-11.4 {remote echo, one line} -setup {
    set port [sendCommand {
	set server [socket -server accept 0]
	proc accept {s a p} {
	    fileevent $s readable [list echo $s]
	    fconfigure $s -buffering line -translation crlf
	}
	proc echo {s} {
	    set l [gets $s]
	    if {[eof $s]} {
		close $s
	    } else {
		puts $s $l
	    }
	}
	getPort $server
    }]
} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
    set f [socket $remoteServerIP $port]
    fconfigure $f -translation crlf -buffering line
    puts $f hello
    gets $f
} -cleanup {
    catch {close $f}
    sendCommand {close $server}
} -result hello
test socket_$af-11.5 {remote echo, 50 lines} -setup {
    set port [sendCommand {
	set server [socket -server accept 0]
	proc accept {s a p} {
	    fileevent $s readable [list echo $s]
	    fconfigure $s -buffering line -translation crlf
	}
	proc echo {s} {
	    set l [gets $s]
	    if {[eof $s]} {
		close $s
	    } else {
		puts $s $l
	    }
	}
	getPort $server
    }]
} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
    set f [socket $remoteServerIP $port]
    fconfigure $f -translation crlf -buffering line
    for {set cnt 0} {$cnt < 50} {incr cnt} {
	puts $f "hello, $cnt"
	if {[gets $f] != "hello, $cnt"} {
	    break
	}
    }
    return $cnt
} -cleanup {
    close $f
    sendCommand {close $server}
} -result 50
test socket_$af-11.6 {socket conflict} -setup {
    set s1 [socket -server accept -myaddr $localhost 0]
} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
    set s2 [socket -server accept -myaddr $localhost [getPort $s1]]
    list [getPort $s2] [close $s2]
} -cleanup {
    close $s1
} -returnCodes error -result {couldn't open socket: address already in use}
test socket_$af-11.7 {server with several clients} -setup {
    set port [sendCommand {
	set server [socket -server accept 0]
	proc accept {s a p} {
	    fconfigure $s -buffering line
	    fileevent $s readable [list echo $s]
	}
	proc echo {s} {
	    set l [gets $s]
	    if {[eof $s]} {
		close $s
	    } else {
		puts $s $l
	    }
	}
	getPort $server
    }]
} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
    set s1 [socket $remoteServerIP $port]
    fconfigure $s1 -buffering line
    set s2 [socket $remoteServerIP $port]
    fconfigure $s2 -buffering line
    set s3 [socket $remoteServerIP $port]
    fconfigure $s3 -buffering line
    for {set i 0} {$i < 100} {incr i} {
	puts $s1 hello,s1
	gets $s1
	puts $s2 hello,s2
	gets $s2
	puts $s3 hello,s3
	gets $s3
    }
    return $i
} -cleanup {
    close $s1
    close $s2
    close $s3
    sendCommand {close $server}
} -result 100
test socket_$af-11.8 {client with several servers} -setup {
    lassign [sendCommand {
	set s1 [socket -server "accept server1" 0]
	set s2 [socket -server "accept server2" 0]
	set s3 [socket -server "accept server3" 0]
	proc accept {mp s a p} {
	    puts $s $mp
	    close $s
	}
	list [getPort $s1] [getPort $s2] [getPort $s3]
    }] p1 p2 p3
} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
    set s1 [socket $remoteServerIP $p1]
    set s2 [socket $remoteServerIP $p2]
    set s3 [socket $remoteServerIP $p3]
    list [gets $s1] [gets $s1] [eof $s1] [gets $s2] [gets $s2] [eof $s2] \
	[gets $s3] [gets $s3] [eof $s3]
} -cleanup {
    close $s1
    close $s2
    close $s3
    sendCommand {
	close $s1
	close $s2
	close $s3
    }
} -result {server1 {} 1 server2 {} 1 server3 {} 1}
test socket_$af-11.9 {accept callback error} -constraints [list socket supported_$af doTestsWithRemoteServer] -setup {
    proc myHandler {msg options} {
	variable x $msg
    }
    set handler [interp bgerror {}]
    interp bgerror {} [namespace which myHandler]
    set timer [after 10000 "set x timed_out"]
} -body {
    set s [socket -server accept 0]
    proc accept {s a p} {expr {10 / 0}}
    sendCommand "set port [getPort $s]"
    if {[catch {
	sendCommand {
	    set peername [fconfigure $callerSocket -peername]
	    set s [socket [lindex $peername 0] $port]
	    close $s
    	 }
    } msg]} then {
	close $s
	error $msg
    }
    vwait x
    return $x
} -cleanup {
    close $s
    after cancel $timer
    interp bgerror {} $handler
} -result {divide by zero}
test socket_$af-11.10 {testing socket specific options} -setup {
    set port [sendCommand {
	set server [socket -server accept 0]
	proc accept {s a p} {close $s}
	getPort $server
    }]
} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
    set s [socket $remoteServerIP $port]
    set p [fconfigure $s -peername]
    set n [fconfigure $s -sockname]
    list [expr {[lindex $p 2] == $port}] [llength $p] [llength $n]
} -cleanup {
    close $s
    sendCommand {close $server}
} -result {1 3 3}
test socket_$af-11.11 {testing spurious events} -setup {
    set port [sendCommand {
	set server [socket -server accept 0]
	proc accept {s a p} {
	    fconfigure $s -translation "auto lf"
	    after idle writesome $s
	}
	proc writesome {s} {
	    for {set i 0} {$i < 100} {incr i} {
		puts $s "line $i from remote server"
	    }
	    close $s
	}
	getPort $server
    }]
    set len 0
    set spurious 0
    set done 0
    set timer [after 40000 "set done timed_out"]
} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
    proc readlittle {s} {
	global spurious done len
	set l [read $s 1]
	if {[string length $l] == 0} {
	    if {![eof $s]} {
		incr spurious
	    } else {
		close $s
		set done 1
	    }
	} else {
	    incr len [string length $l]
	}
    }
    set c [socket $remoteServerIP $port]
    fileevent $c readable "readlittle $c"
    vwait done
    list $spurious $len $done
} -cleanup {
    after cancel $timer
    sendCommand {close $server}
} -result {0 2690 1}
test socket_$af-11.12 {testing EOF stickyness} -constraints [list socket supported_$af doTestsWithRemoteServer] -setup {
    set counter 0
    set done 0
    set port [sendCommand {
	set server [socket -server accept 0]
	proc accept {s a p} {
	    after idle close $s
	}
	getPort $server
    }]
    proc timed_out {} {
	global c done
	set done {timed_out, EOF is not sticky}
	close $c
    }
    set after_id [after 1000 timed_out]
} -body {
    proc count_up {s} {
	global counter done
	set l [gets $s]
	if {[eof $s]} {
	    incr counter
	    if {$counter > 9} {
		set done {EOF is sticky}
		close $s
	    }
	}
    }
    set c [socket $remoteServerIP $port]
    fileevent $c readable [list count_up $c]
    vwait done
    return $done
} -cleanup {
    after cancel $after_id
    sendCommand {close $server}
} -result {EOF is sticky}
test socket_$af-11.13 {testing async write, async flush, async close} -setup {
    set port [sendCommand {
	set firstblock ""
	for {set i 0} {$i < 5} {incr i} {
		set firstblock "a$firstblock$firstblock"
	}
	set secondblock ""
	for {set i 0} {$i < 16} {incr i} {
	    set secondblock "b$secondblock$secondblock"
	}
	set l [socket -server accept 0]
	proc accept {s a p} {
	    fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
		-buffering line
	    fileevent $s readable "readable $s"
	}
	proc readable {s} {
	    set l [gets $s]
	    fileevent $s readable {}
	    after idle respond $s
	}
	proc respond {s} {
	    global firstblock
	    puts -nonewline $s $firstblock
	    after idle writedata $s
	}
	proc writedata {s} {
	    global secondblock
	    puts -nonewline $s $secondblock
	    close $s
	}
	getPort $l
    }]
    set timer [after 10000 "set done timed_out"]
} -constraints [list socket supported_$af doTestsWithRemoteServer] -body {
    proc readit {s} {
	global count done
	set l [read $s]
	incr count [string length $l]
	if {[eof $s]} {
	    close $s
	    set done 1
	}
    }
    set s [socket $remoteServerIP $port]
    fconfigure $s -blocking 0 -trans lf -buffering line
    set count 0
    puts $s hello
    fileevent $s readable "readit $s"
    vwait done
    return $count
} -cleanup {
    after cancel $timer
    sendCommand {close $l}
} -result 65566

set path(script1) [makeFile {} script1]
set path(script2) [makeFile {} script2]

test socket_$af-12.1 {testing inheritance of server sockets} -setup {
    file delete $path(script1)
    file delete $path(script2)
    # Script1 is just a 10 second delay. If the server socket is inherited, it
    # will be held open for 10 seconds
    set f [open $path(script1) w]
    puts $f {
	fileevent stdin readable exit
	after 10000 exit
	vwait forever
    }
    close $f
    # Script2 creates the server socket, launches script1, and exits.
    # The server socket will now be closed unless script1 inherited it.
    set f [open $path(script2) w]
    puts $f [list set tcltest [interpreter]]
    puts $f [list set delay $path(script1)]
    puts $f [list set localhost $localhost]
    puts $f {
	set f [socket -server accept -myaddr $localhost 0]
	proc accept { file addr port } {
	    close $file
	}
	exec $tcltest $delay &
	puts [lindex [fconfigure $f -sockname] 2]
	close $f
        exit
    }
    close $f
} -constraints [list socket supported_$af stdio exec] -body {
    # Launch script2 and wait 5 seconds
    ### exec [interpreter] script2 &
    set p [open "|[list [interpreter] $path(script2)]" r]
    # If we can still connect to the server, the socket got inherited.
    if {[catch {close [socket $localhost $listen]}]} {
	return {server socket was not inherited}
    } else {
	return {server socket was inherited}
    }
} -cleanup {
    catch {close $p}
} -result {server socket was not inherited}
test socket_$af-12.2 {testing inheritance of client sockets} -setup {
    file delete $path(script1)
    file delete $path(script2)
    # Script1 is just a 20 second delay. If the server socket is inherited, it
    # will be held open for 20 seconds
    set f [open $path(script1) w]
    puts $f {
	fileevent stdin readable exit
	after 20000 exit
	vwait forever
    }
    close $f
    # Script2 opens the client socket and writes to it. It then launches
    # script1 and exits. If the child process inherited the client socket, the
    # socket will still be open.
    set f [open $path(script2) w]
    puts $f [list set tcltest [interpreter]]
    puts $f [list set delay $path(script1)]
    puts $f [list set localhost $localhost]
    puts $f {
        gets stdin port
	set f [socket $localhost $port]
        exec $tcltest $delay &
	puts $f testing
	flush $f
        exit
    }
    close $f
    # If the socket doesn't hit end-of-file in 10 seconds, the script1 process
    # must have inherited the client.
    set failed 0
    set after [after 10000 [list set failed 1]]
} -constraints [list socket supported_$af stdio exec] -body {
    # Create the server socket
    set server [socket -server accept -myaddr $localhost 0]
    proc accept { file host port } {
	# When the client connects, establish the read handler
	global server
	close $server
	fileevent $file readable [list getdata $file]
	fconfigure $file -buffering line -blocking 0
    }
    proc getdata { file } {
	# Read handler on the accepted socket.
	global x failed
	set status [catch {read $file} data]
	if {$status != 0} {
	    set x {read failed, error was $data}
	    catch { close $file }
	} elseif {$data ne ""} {
	} elseif {[fblocked $file]} {
	} elseif {[eof $file]} {
	    if {$failed} {
		set x {client socket was inherited}
	    } else {
		set x {client socket was not inherited}
	    }
	    catch { close $file }
	} else {
	    set x {impossible case}
	    catch { close $file }
	}
    }
    # Launch the script2 process
    ### exec [interpreter] script2 &
    set p [open "|[list [interpreter] $path(script2)]" w]
    puts $p [lindex [fconfigure $server -sockname] 2] ; flush $p
    vwait x
    return $x
} -cleanup {
    after cancel $after
    close $p
} -result {client socket was not inherited}
test socket_$af-12.3 {testing inheritance of accepted sockets} -setup {
    file delete $path(script1)
    file delete $path(script2)
    set f [open $path(script1) w]
    puts $f {
	fileevent stdin readable exit
	after 10000 exit
	vwait forever
    }
    close $f
    set f [open $path(script2) w]
    puts $f [list set tcltest [interpreter]]
    puts $f [list set delay $path(script1)]
    puts $f [list set localhost $localhost]
    puts $f {
	set server [socket -server accept -myaddr $localhost 0]
	proc accept { file host port } {
	    global tcltest delay
	    puts $file {test data on socket}
	    exec $tcltest $delay &
            after idle exit
	}
	puts stdout [lindex [fconfigure $server -sockname] 2]
	vwait forever
    }
    close $f
} -constraints [list socket supported_$af stdio exec] -body {
    # Launch the script2 process and connect to it. See how long the socket
    # stays open
    ## exec [interpreter] script2 &
    set p [open "|[list [interpreter] $path(script2)]" r]
    gets $p listen
    set f [socket $localhost $listen]
    fconfigure $f -buffering full -blocking 0
    fileevent $f readable [list getdata $f]
    # If the socket is still open after 5 seconds, the script1 process must
    # have inherited the accepted socket.
    set failed 0
    set after [after 5000 [list set failed 1]]
    proc getdata { file } {
	# Read handler on the client socket.
	global x
	global failed
	set status [catch {read $file} data]
	if {$status != 0} {
	    set x {read failed, error was $data}
	    catch { close $file }
	} elseif {[string compare {} $data]} {
	} elseif {[fblocked $file]} {
	} elseif {[eof $file]} {
	    if {$failed} {
		set x {accepted socket was inherited}
	    } else {
		set x {accepted socket was not inherited}
	    }
	    catch { close $file }
	} else {
	    set x {impossible case}
	    catch { close $file }
	}
	return
    }
    vwait x
    return $x
} -cleanup {
    after cancel $after
    catch {close $p}
} -result {accepted socket was not inherited}

test socket_$af-13.1 {Testing use of shared socket between two threads} -setup {
    threadReap
    set path(script) [makeFile [string map [list @localhost@ $localhost] {
        set f [socket -server accept -myaddr @localhost@ 0]
        set listen [lindex [fconfigure $f -sockname] 2]
        proc accept {s a p} {
            fileevent $s readable [list echo $s]
            fconfigure $s -buffering line
        }
        proc echo {s} {
             global i
             set l [gets $s]
             if {[eof $s]} {
                 global x
                 close $s
                 set x done
             } else {
                 incr i
                 puts $s $l
             }
        }
        set i 0
        vwait x
        close $f
        # thread cleans itself up.
        testthread exit
    }] script]
} -constraints [list socket supported_$af testthread] -body {
    # create a thread
    set serverthread [testthread create [list source $path(script) ] ]
    update
    set port [testthread send $serverthread {set listen}]
    update
    set s [socket $localhost $port]
    fconfigure $s -buffering line
    catch {
        puts $s "hello"
        gets $s result
    }
    close $s
    update
    append result " " [threadReap]
} -cleanup {
    removeFile script
} -result {hello 1}

# ----------------------------------------------------------------------

removeFile script1
removeFile script2

# cleanup
if {$remoteProcChan ne ""} {
    catch {sendCommand exit}
}
catch {close $commandSocket}
catch {close $remoteProcChan}
}
unset ::tcl::unsupported::socketAF
test socket-14.0 {[socket -async] when server only listens on one address family} \
    -constraints [list socket supported_any] \
    -setup {
        proc accept {s a p} {
            global x
            puts $s bye
            close $s
            set x ok
        }
        set server [socket -server accept -myaddr 127.0.0.1 0]
        set port [lindex [fconfigure $server -sockname] 2]
    } -body {
        set client [socket -async localhost $port]
        after 1000 {set x [fconfigure $client -error]}
        vwait x
        set x
    } -cleanup {
        close $server
        close $client
    } -result ok
test socket-14.1 {[socket -async] fileevent while still connecting} \
    -constraints [list socket supported_any] \
    -setup {
        proc accept {s a p} {
            global x
            puts $s bye
            close $s
            set x ok
        }
        set server [socket -server accept -myaddr 127.0.0.1 2222]
        set port [lindex [fconfigure $server -sockname] 2]
    } -body {
        set client [socket -async localhost $port]
        fileevent $client readable {lappend x [fconfigure $client -error]}
        set after [after 1000 {set x timeout}]
        vwait x
        vwait x
        set x
    } -cleanup {
        after cancel $after
        close $server
        close $client
    } -result {ok {}}
test socket-14.2 {[socket -async] fileevent connection refused} \
    -constraints [list socket supported_any] \
    -body {
        set client [socket -async localhost 0]
        fileevent $client readable {set x [fconfigure $client -error]}
        set after [after 1000 {set x timeout}]
        vwait x
        set x
    } -cleanup {
        after cancel $after
        close $client
    } -result "connection refused"

::tcltest::cleanupTests
flush stdout
return

# Local Variables:
# mode: tcl
# fill-column: 78
# End: