summaryrefslogtreecommitdiffstats
path: root/doc/entry.n
diff options
context:
space:
mode:
authorrjohnson <rjohnson>1998-04-01 09:37:39 (GMT)
committerrjohnson <rjohnson>1998-04-01 09:37:39 (GMT)
commit13242623d2ff3ea02ab6a62bfb48a7dbb5c27e22 (patch)
tree3100714738a7941b590efee466a774862f9671c3 /doc/entry.n
parente4ab1102029f9ac557ff190bfb9d34408340f345 (diff)
downloadtk-13242623d2ff3ea02ab6a62bfb48a7dbb5c27e22.zip
tk-13242623d2ff3ea02ab6a62bfb48a7dbb5c27e22.tar.gz
tk-13242623d2ff3ea02ab6a62bfb48a7dbb5c27e22.tar.bz2
Initial revision
Diffstat (limited to 'doc/entry.n')
-rw-r--r--doc/entry.n417
1 files changed, 417 insertions, 0 deletions
diff --git a/doc/entry.n b/doc/entry.n
new file mode 100644
index 0000000..7a8e718
--- /dev/null
+++ b/doc/entry.n
@@ -0,0 +1,417 @@
+'\"
+'\" Copyright (c) 1990-1994 The Regents of the University of California.
+'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
+'\"
+'\" See the file "license.terms" for information on usage and redistribution
+'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+'\"
+'\" SCCS: @(#) entry.n 1.41 97/10/31 12:58:44
+'\"
+.so man.macros
+.TH entry n 4.1 Tk "Tk Built-In Commands"
+.BS
+'\" Note: do not modify the .SH NAME line immediately below!
+.SH NAME
+entry \- Create and manipulate entry widgets
+.SH SYNOPSIS
+\fBentry\fR \fIpathName \fR?\fIoptions\fR?
+.SO
+\-background \-highlightbackground \-insertontime \-selectforeground
+\-borderwidth \-highlightcolor \-insertwidth \-takefocus
+\-cursor \-highlightthickness \-justify \-textvariable
+\-exportselection \-insertbackground \-relief \-xscrollcommand
+\-font \-insertborderwidth \-selectbackground
+\-foreground \-insertofftime \-selectborderwidth
+.SE
+.SH "WIDGET-SPECIFIC OPTIONS"
+.OP \-show show Show
+If this option is specified, then the true contents of the entry
+are not displayed in the window.
+Instead, each character in the entry's value will be displayed as
+the first character in the value of this option, such as ``*''.
+This is useful, for example, if the entry is to be used to enter
+a password.
+If characters in the entry are selected and copied elsewhere, the
+information copied will be what is displayed, not the true contents
+of the entry.
+.OP \-state state State
+Specifies one of two states for the entry: \fBnormal\fR or \fBdisabled\fR.
+If the entry is disabled then the value may not be changed using widget
+commands and no insertion cursor will be displayed, even if the input focus is
+in the widget.
+.OP \-width width Width
+Specifies an integer value indicating the desired width of the entry window,
+in average-size characters of the widget's font.
+If the value is less than or equal to zero, the widget picks a
+size just large enough to hold its current text.
+.BE
+
+.SH DESCRIPTION
+.PP
+The \fBentry\fR command creates a new window (given by the
+\fIpathName\fR argument) and makes it into an entry widget.
+Additional options, described above, may be specified on the
+command line or in the option database
+to configure aspects of the entry such as its colors, font,
+and relief. The \fBentry\fR command returns its
+\fIpathName\fR argument. At the time this command is invoked,
+there must not exist a window named \fIpathName\fR, but
+\fIpathName\fR's parent must exist.
+.PP
+An entry is a widget that displays a one-line text string and
+allows that string to be edited using widget commands described below, which
+are typically bound to keystrokes and mouse actions.
+When first created, an entry's string is empty.
+A portion of the entry may be selected as described below.
+If an entry is exporting its selection (see the \fBexportSelection\fR
+option), then it will observe the standard X11 protocols for handling the
+selection; entry selections are available as type \fBSTRING\fR.
+Entries also observe the standard Tk rules for dealing with the
+input focus. When an entry has the input focus it displays an
+\fIinsertion cursor\fR to indicate where new characters will be
+inserted.
+.PP
+Entries are capable of displaying strings that are too long to
+fit entirely within the widget's window. In this case, only a
+portion of the string will be displayed; commands described below
+may be used to change the view in the window. Entries use
+the standard \fBxScrollCommand\fR mechanism for interacting with
+scrollbars (see the description of the \fBxScrollCommand\fR option
+for details). They also support scanning, as described below.
+
+.SH "WIDGET COMMAND"
+.PP
+The \fBentry\fR command creates a new Tcl command whose
+name is \fIpathName\fR. This
+command may be used to invoke various
+operations on the widget. It has the following general form:
+.CS
+\fIpathName option \fR?\fIarg arg ...\fR?
+.CE
+\fIOption\fR and the \fIarg\fRs
+determine the exact behavior of the command.
+.PP
+Many of the widget commands for entries take one or more indices as
+arguments. An index specifies a particular character in the entry's
+string, in any of the following ways:
+.TP 12
+\fInumber\fR
+Specifies the character as a numerical index, where 0 corresponds
+to the first character in the string.
+.TP 12
+\fBanchor\fR
+Indicates the anchor point for the selection, which is set with the
+\fBselect from\fR and \fBselect adjust\fR widget commands.
+.TP 12
+\fBend\fR
+Indicates the character just after the last one in the entry's string.
+This is equivalent to specifying a numerical index equal to the length
+of the entry's string.
+.TP 12
+\fBinsert\fR
+Indicates the character adjacent to and immediately following the
+insertion cursor.
+.TP 12
+\fBsel.first\fR
+Indicates the first character in the selection. It is an error to
+use this form if the selection isn't in the entry window.
+.TP 12
+\fBsel.last\fR
+Indicates the character just after the last one in the selection.
+It is an error to use this form if the selection isn't in the
+entry window.
+.TP 12
+\fB@\fInumber\fR
+In this form, \fInumber\fR is treated as an x-coordinate in the
+entry's window; the character spanning that x-coordinate is used.
+For example, ``\fB@0\fR'' indicates the left-most character in the
+window.
+.LP
+Abbreviations may be used for any of the forms above, e.g. ``\fBe\fR''
+or ``\fBsel.f\fR''. In general, out-of-range indices are automatically
+rounded to the nearest legal value.
+.PP
+The following commands are possible for entry widgets:
+.TP
+\fIpathName \fBbbox \fIindex\fR
+Returns a list of four numbers describing the bounding box of the
+character given by \fIindex\fR.
+The first two elements of the list give the x and y coordinates of
+the upper-left corner of the screen area covered by the character
+(in pixels relative to the widget) and the last two elements give
+the width and height of the character, in pixels.
+The bounding box may refer to a region outside the visible area
+of the window.
+.TP
+\fIpathName \fBcget\fR \fIoption\fR
+Returns the current value of the configuration option given
+by \fIoption\fR.
+\fIOption\fR may have any of the values accepted by the \fBentry\fR
+command.
+.TP
+\fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
+Query or modify the configuration options of the widget.
+If no \fIoption\fR is specified, returns a list describing all of
+the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
+information on the format of this list). If \fIoption\fR is specified
+with no \fIvalue\fR, then the command returns a list describing the
+one named option (this list will be identical to the corresponding
+sublist of the value returned if no \fIoption\fR is specified). If
+one or more \fIoption\-value\fR pairs are specified, then the command
+modifies the given widget option(s) to have the given value(s); in
+this case the command returns an empty string.
+\fIOption\fR may have any of the values accepted by the \fBentry\fR
+command.
+.TP
+\fIpathName \fBdelete \fIfirst \fR?\fIlast\fR?
+Delete one or more elements of the entry.
+\fIFirst\fR is the index of the first character to delete, and
+\fIlast\fR is the index of the character just after the last
+one to delete.
+If \fIlast\fR isn't specified it defaults to \fIfirst\fR+1,
+i.e. a single character is deleted.
+This command returns an empty string.
+.TP
+\fIpathName \fBget\fR
+Returns the entry's string.
+.TP
+\fIpathName \fBicursor \fIindex\fR
+Arrange for the insertion cursor to be displayed just before the character
+given by \fIindex\fR. Returns an empty string.
+.TP
+\fIpathName \fBindex\fI index\fR
+Returns the numerical index corresponding to \fIindex\fR.
+.TP
+\fIpathName \fBinsert \fIindex string\fR
+Insert the characters of \fIstring\fR just before the character
+indicated by \fIindex\fR. Returns an empty string.
+.TP
+\fIpathName \fBscan\fR \fIoption args\fR
+This command is used to implement scanning on entries. It has
+two forms, depending on \fIoption\fR:
+.RS
+.TP
+\fIpathName \fBscan mark \fIx\fR
+Records \fIx\fR and the current view in the entry window; used in
+conjunction with later \fBscan dragto\fR commands. Typically this
+command is associated with a mouse button press in the widget. It
+returns an empty string.
+.TP
+\fIpathName \fBscan dragto \fIx\fR
+This command computes the difference between its \fIx\fR argument
+and the \fIx\fR argument to the last \fBscan mark\fR command for
+the widget. It then adjusts the view left or right by 10 times the
+difference in x-coordinates. This command is typically associated
+with mouse motion events in the widget, to produce the effect of
+dragging the entry at high speed through the window. The return
+value is an empty string.
+.RE
+.TP
+\fIpathName \fBselection \fIoption arg\fR
+This command is used to adjust the selection within an entry. It
+has several forms, depending on \fIoption\fR:
+.RS
+.TP
+\fIpathName \fBselection adjust \fIindex\fR
+Locate the end of the selection nearest to the character given by
+\fIindex\fR, and adjust that end of the selection to be at \fIindex\fR
+(i.e including but not going beyond \fIindex\fR). The other
+end of the selection is made the anchor point for future
+\fBselect to\fR commands. If the selection
+isn't currently in the entry, then a new selection is created to
+include the characters between \fIindex\fR and the most recent
+selection anchor point, inclusive.
+Returns an empty string.
+.TP
+\fIpathName \fBselection clear\fR
+Clear the selection if it is currently in this widget. If the
+selection isn't in this widget then the command has no effect.
+Returns an empty string.
+.TP
+\fIpathName \fBselection from \fIindex\fR
+Set the selection anchor point to just before the character
+given by \fIindex\fR. Doesn't change the selection.
+Returns an empty string.
+.TP
+\fIpathName \fBselection present\fR
+Returns 1 if there is are characters selected in the entry,
+0 if nothing is selected.
+.TP
+\fIpathName \fBselection range \fIstart\fR \fIend\fR
+Sets the selection to include the characters starting with
+the one indexed by \fIstart\fR and ending with the one just
+before \fIend\fR.
+If \fIend\fR refers to the same character as \fIstart\fR or an
+earlier one, then the entry's selection is cleared.
+.TP
+\fIpathName \fBselection to \fIindex\fR
+If \fIindex\fR is before the anchor point, set the selection
+to the characters from \fIindex\fR up to but not including
+the anchor point.
+If \fIindex\fR is the same as the anchor point, do nothing.
+If \fIindex\fR is after the anchor point, set the selection
+to the characters from the anchor point up to but not including
+\fIindex\fR.
+The anchor point is determined by the most recent \fBselect from\fR
+or \fBselect adjust\fR command in this widget.
+If the selection isn't in this widget then a new selection is
+created using the most recent anchor point specified for the widget.
+Returns an empty string.
+.RE
+.TP
+\fIpathName \fBxview \fIargs\fR
+This command is used to query and change the horizontal position of the
+text in the widget's window. It can take any of the following
+forms:
+.RS
+.TP
+\fIpathName \fBxview\fR
+Returns a list containing two elements.
+Each element is a real fraction between 0 and 1; together they describe
+the horizontal span that is visible in the window.
+For example, if the first element is .2 and the second element is .6,
+20% of the entry's text is off-screen to the left, the middle 40% is visible
+in the window, and 40% of the text is off-screen to the right.
+These are the same values passed to scrollbars via the \fB\-xscrollcommand\fR
+option.
+.TP
+\fIpathName \fBxview\fR \fIindex\fR
+Adjusts the view in the window so that the character given by \fIindex\fR
+is displayed at the left edge of the window.
+.TP
+\fIpathName \fBxview moveto\fI fraction\fR
+Adjusts the view in the window so that the character \fIfraction\fR of the
+way through the text appears at the left edge of the window.
+\fIFraction\fR must be a fraction between 0 and 1.
+.TP
+\fIpathName \fBxview scroll \fInumber what\fR
+This command shifts the view in the window left or right according to
+\fInumber\fR and \fIwhat\fR.
+\fINumber\fR must be an integer.
+\fIWhat\fR must be either \fBunits\fR or \fBpages\fR or an abbreviation
+of one of these.
+If \fIwhat\fR is \fBunits\fR, the view adjusts left or right by
+\fInumber\fR average-width characters on the display; if it is
+\fBpages\fR then the view adjusts by \fInumber\fR screenfuls.
+If \fInumber\fR is negative then characters farther to the left
+become visible; if it is positive then characters farther to the right
+become visible.
+.RE
+
+.SH "DEFAULT BINDINGS"
+.PP
+Tk automatically creates class bindings for entries that give them
+the following default behavior.
+In the descriptions below, ``word'' refers to a contiguous group
+of letters, digits, or ``_'' characters, or any single character
+other than these.
+.IP [1]
+Clicking mouse button 1 positions the insertion cursor
+just before the character underneath the mouse cursor, sets the
+input focus to this widget, and clears any selection in the widget.
+Dragging with mouse button 1 strokes out a selection between
+the insertion cursor and the character under the mouse.
+.IP [2]
+Double-clicking with mouse button 1 selects the word under the mouse
+and positions the insertion cursor at the beginning of the word.
+Dragging after a double click will stroke out a selection consisting
+of whole words.
+.IP [3]
+Triple-clicking with mouse button 1 selects all of the text in the
+entry and positions the insertion cursor before the first character.
+.IP [4]
+The ends of the selection can be adjusted by dragging with mouse
+button 1 while the Shift key is down; this will adjust the end
+of the selection that was nearest to the mouse cursor when button
+1 was pressed.
+If the button is double-clicked before dragging then the selection
+will be adjusted in units of whole words.
+.IP [5]
+Clicking mouse button 1 with the Control key down will position the
+insertion cursor in the entry without affecting the selection.
+.IP [6]
+If any normal printing characters are typed in an entry, they are
+inserted at the point of the insertion cursor.
+.IP [7]
+The view in the entry can be adjusted by dragging with mouse button 2.
+If mouse button 2 is clicked without moving the mouse, the selection
+is copied into the entry at the position of the mouse cursor.
+.IP [8]
+If the mouse is dragged out of the entry on the left or right sides
+while button 1 is pressed, the entry will automatically scroll to
+make more text visible (if there is more text off-screen on the side
+where the mouse left the window).
+.IP [9]
+The Left and Right keys move the insertion cursor one character to the
+left or right; they also clear any selection in the entry and set
+the selection anchor.
+If Left or Right is typed with the Shift key down, then the insertion
+cursor moves and the selection is extended to include the new character.
+Control-Left and Control-Right move the insertion cursor by words, and
+Control-Shift-Left and Control-Shift-Right move the insertion cursor
+by words and also extend the selection.
+Control-b and Control-f behave the same as Left and Right, respectively.
+Meta-b and Meta-f behave the same as Control-Left and Control-Right,
+respectively.
+.IP [10]
+The Home key, or Control-a, will move the insertion cursor to the
+beginning of the entry and clear any selection in the entry.
+Shift-Home moves the insertion cursor to the beginning of the entry
+and also extends the selection to that point.
+.IP [11]
+The End key, or Control-e, will move the insertion cursor to the
+end of the entry and clear any selection in the entry.
+Shift-End moves the cursor to the end and extends the selection
+to that point.
+.IP [12]
+The Select key and Control-Space set the selection anchor to the position
+of the insertion cursor. They don't affect the current selection.
+Shift-Select and Control-Shift-Space adjust the selection to the
+current position of the insertion cursor, selecting from the anchor
+to the insertion cursor if there was not any selection previously.
+.IP [13]
+Control-/ selects all the text in the entry.
+.IP [14]
+Control-\e clears any selection in the entry.
+.IP [15]
+The F16 key (labelled Copy on many Sun workstations) or Meta-w
+copies the selection in the widget to the clipboard, if there is a selection.
+.IP [16]
+The F20 key (labelled Cut on many Sun workstations) or Control-w
+copies the selection in the widget to the clipboard and deletes
+the selection.
+If there is no selection in the widget then these keys have no effect.
+.IP [17]
+The F18 key (labelled Paste on many Sun workstations) or Control-y
+inserts the contents of the clipboard at the position of the
+insertion cursor.
+.IP [18]
+The Delete key deletes the selection, if there is one in the entry.
+If there is no selection, it deletes the character to the right of
+the insertion cursor.
+.IP [19]
+The BackSpace key and Control-h delete the selection, if there is one
+in the entry.
+If there is no selection, it deletes the character to the left of
+the insertion cursor.
+.IP [20]
+Control-d deletes the character to the right of the insertion cursor.
+.IP [21]
+Meta-d deletes the word to the right of the insertion cursor.
+.IP [22]
+Control-k deletes all the characters to the right of the insertion
+cursor.
+.IP [23]
+Control-t reverses the order of the two characters to the right of
+the insertion cursor.
+.PP
+If the entry is disabled using the \fB\-state\fR option, then the entry's
+view can still be adjusted and text in the entry can still be selected,
+but no insertion cursor will be displayed and no text modifications will
+take place.
+.PP
+The behavior of entries can be changed by defining new bindings for
+individual widgets or by redefining the class bindings.
+
+.SH KEYWORDS
+entry, widget