summaryrefslogtreecommitdiffstats
path: root/doc/radiobutton.n
diff options
context:
space:
mode:
authorrjohnson <rjohnson>1998-04-01 09:37:39 (GMT)
committerrjohnson <rjohnson>1998-04-01 09:37:39 (GMT)
commit13242623d2ff3ea02ab6a62bfb48a7dbb5c27e22 (patch)
tree3100714738a7941b590efee466a774862f9671c3 /doc/radiobutton.n
parente4ab1102029f9ac557ff190bfb9d34408340f345 (diff)
downloadtk-13242623d2ff3ea02ab6a62bfb48a7dbb5c27e22.zip
tk-13242623d2ff3ea02ab6a62bfb48a7dbb5c27e22.tar.gz
tk-13242623d2ff3ea02ab6a62bfb48a7dbb5c27e22.tar.bz2
Initial revision
Diffstat (limited to 'doc/radiobutton.n')
-rw-r--r--doc/radiobutton.n233
1 files changed, 233 insertions, 0 deletions
diff --git a/doc/radiobutton.n b/doc/radiobutton.n
new file mode 100644
index 0000000..58e4d22
--- /dev/null
+++ b/doc/radiobutton.n
@@ -0,0 +1,233 @@
+'\"
+'\" Copyright (c) 1990-1994 The Regents of the University of California.
+'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
+'\"
+'\" See the file "license.terms" for information on usage and redistribution
+'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+'\"
+'\" SCCS: @(#) radiobutton.n 1.41 97/10/31 12:58:51
+'\"
+.so man.macros
+.TH radiobutton n 4.4 Tk "Tk Built-In Commands"
+.BS
+'\" Note: do not modify the .SH NAME line immediately below!
+.SH NAME
+radiobutton \- Create and manipulate radiobutton widgets
+.SH SYNOPSIS
+\fBradiobutton\fR \fIpathName \fR?\fIoptions\fR?
+.SO
+\-activebackground \-cursor \-highlightthickness \-takefocus
+\-activeforeground \-disabledforeground \-image \-text
+\-anchor \-font \-justify \-textvariable
+\-background \-foreground \-padx \-underline
+\-bitmap \-highlightbackground \-pady \-wraplength
+\-borderwidth \-highlightcolor \-relief
+.SE
+.SH "WIDGET-SPECIFIC OPTIONS"
+.OP \-command command Command
+Specifies a Tcl command to associate with the button. This command
+is typically invoked when mouse button 1 is released over the button
+window. The button's global variable (\fB\-variable\fR option) will
+be updated before the command is invoked.
+.OP \-height height Height
+Specifies a desired height for the button.
+If an image or bitmap is being displayed in the button then the value is in
+screen units (i.e. any of the forms acceptable to \fBTk_GetPixels\fR);
+for text it is in lines of text.
+If this option isn't specified, the button's desired height is computed
+from the size of the image or bitmap or text being displayed in it.
+.OP \-indicatoron indicatorOn IndicatorOn
+Specifies whether or not the indicator should be drawn. Must be a
+proper boolean value. If false, the \fBrelief\fR option is
+ignored and the widget's relief is always sunken if the widget is
+selected and raised otherwise.
+.OP \-selectcolor selectColor Background
+Specifies a background color to use when the button is selected.
+If \fBindicatorOn\fR is true then the color applies to the indicator.
+Under Windows, this color is used as the background for the indicator
+regardless of the select state.
+If \fBindicatorOn\fR is false, this color is used as the background
+for the entire widget, in place of \fBbackground\fR or \fBactiveBackground\fR,
+whenever the widget is selected.
+If specified as an empty string then no special color is used for
+displaying when the widget is selected.
+.OP \-selectimage selectImage SelectImage
+Specifies an image to display (in place of the \fBimage\fR option)
+when the radiobutton is selected.
+This option is ignored unless the \fBimage\fR option has been
+specified.
+.OP \-state state State
+Specifies one of three states for the radiobutton: \fBnormal\fR, \fBactive\fR,
+or \fBdisabled\fR. In normal state the radiobutton is displayed using the
+\fBforeground\fR and \fBbackground\fR options. The active state is
+typically used when the pointer is over the radiobutton. In active state
+the radiobutton is displayed using the \fBactiveForeground\fR and
+\fBactiveBackground\fR options. Disabled state means that the radiobutton
+should be insensitive: the default bindings will refuse to activate
+the widget and will ignore mouse button presses.
+In this state the \fBdisabledForeground\fR and
+\fBbackground\fR options determine how the radiobutton is displayed.
+.OP \-value value Value
+Specifies value to store in the button's associated variable whenever
+this button is selected.
+.OP \-variable variable Variable
+Specifies name of global variable to set whenever this button is
+selected. Changes in this variable also cause the button to select
+or deselect itself.
+Defaults to the value \fBselectedButton\fR.
+.OP \-width width Width
+Specifies a desired width for the button.
+If an image or bitmap is being displayed in the button, the value is in
+screen units (i.e. any of the forms acceptable to \fBTk_GetPixels\fR);
+for text it is in characters.
+If this option isn't specified, the button's desired width is computed
+from the size of the image or bitmap or text being displayed in it.
+.BE
+
+.SH DESCRIPTION
+.PP
+The \fBradiobutton\fR command creates a new window (given by the
+\fIpathName\fR argument) and makes it into a radiobutton widget.
+Additional
+options, described above, may be specified on the command line
+or in the option database
+to configure aspects of the radiobutton such as its colors, font,
+text, and initial relief. The \fBradiobutton\fR command returns its
+\fIpathName\fR argument. At the time this command is invoked,
+there must not exist a window named \fIpathName\fR, but
+\fIpathName\fR's parent must exist.
+.PP
+.VS
+A radiobutton is a widget that displays a textual string, bitmap or image
+and a diamond or circle called an \fIindicator\fR.
+.VE
+If text is displayed, it must all be in a single font, but it
+can occupy multiple lines on the screen (if it contains newlines
+or if wrapping occurs because of the \fBwrapLength\fR option) and
+one of the characters may optionally be underlined using the
+\fBunderline\fR option. A radiobutton has
+all of the behavior of a simple button: it can display itself in either
+of three different ways, according to the \fBstate\fR option;
+it can be made to appear
+raised, sunken, or flat; it can be made to flash; and it invokes
+a Tcl command whenever mouse button 1 is clicked over the
+check button.
+.PP
+In addition, radiobuttons can be \fIselected\fR.
+If a radiobutton is selected, the indicator is normally
+.VS
+drawn with a selected appearance, and
+a Tcl variable associated with the radiobutton is set to a particular
+value (normally 1).
+Under Unix, the indicator is drawn with a sunken relief and a special
+color. Under Windows, the indicator is drawn with a round mark inside.
+If the radiobutton is not selected, then the indicator is drawn with a
+deselected appearance, and the associated variable is
+set to a different value (typically 0).
+Under Unix, the indicator is drawn with a raised relief and no special
+color. Under Windows, the indicator is drawn without a round mark inside.
+.VE
+Typically, several radiobuttons share a single variable and the
+value of the variable indicates which radiobutton is to be selected.
+When a radiobutton is selected it sets the value of the variable to
+indicate that fact; each radiobutton also monitors the value of
+the variable and automatically selects and deselects itself when the
+variable's value changes.
+By default the variable \fBselectedButton\fR
+is used; its contents give the name of the button that is
+selected, or the empty string if no button associated with that
+variable is selected.
+The name of the variable for a radiobutton,
+plus the variable to be stored into it, may be modified with options
+on the command line or in the option database.
+Configuration options may also be used to modify the way the
+indicator is displayed (or whether it is displayed at all).
+By default a radiobutton is configured to select itself on button clicks.
+
+.SH "WIDGET COMMAND"
+.PP
+The \fBradiobutton\fR command creates a new Tcl command whose
+name is \fIpathName\fR. This
+command may be used to invoke various
+operations on the widget. It has the following general form:
+.CS
+\fIpathName option \fR?\fIarg arg ...\fR?
+.CE
+\fIOption\fR and the \fIarg\fRs
+determine the exact behavior of the command. The following
+commands are possible for radiobutton widgets:
+.TP
+\fIpathName \fBcget\fR \fIoption\fR
+Returns the current value of the configuration option given
+by \fIoption\fR.
+\fIOption\fR may have any of the values accepted by the \fBradiobutton\fR
+command.
+.TP
+\fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
+Query or modify the configuration options of the widget.
+If no \fIoption\fR is specified, returns a list describing all of
+the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
+information on the format of this list). If \fIoption\fR is specified
+with no \fIvalue\fR, the command returns a list describing the
+one named option (this list will be identical to the corresponding
+sublist of the value returned if no \fIoption\fR is specified). If
+one or more \fIoption\-value\fR pairs are specified, the command
+modifies the given widget option(s) to have the given value(s); in
+this case the command returns an empty string.
+\fIOption\fR may have any of the values accepted by the \fBradiobutton\fR
+command.
+.TP
+\fIpathName \fBdeselect\fR
+Deselects the radiobutton and sets the associated variable to an
+empty string.
+If this radiobutton was not currently selected, the command has
+no effect.
+.TP
+\fIpathName \fBflash\fR
+Flashes the radiobutton. This is accomplished by redisplaying the radiobutton
+several times, alternating between active and normal colors. At
+the end of the flash the radiobutton is left in the same normal/active
+state as when the command was invoked.
+This command is ignored if the radiobutton's state is \fBdisabled\fR.
+.TP
+\fIpathName \fBinvoke\fR
+Does just what would have happened if the user invoked the radiobutton
+with the mouse: selects the button and invokes
+its associated Tcl command, if there is one.
+The return value is the return value from the Tcl command, or an
+empty string if there is no command associated with the radiobutton.
+This command is ignored if the radiobutton's state is \fBdisabled\fR.
+.TP
+\fIpathName \fBselect\fR
+Selects the radiobutton and sets the associated variable to the
+value corresponding to this widget.
+
+.SH BINDINGS
+.PP
+Tk automatically creates class bindings for radiobuttons that give them
+the following default behavior:
+.VS
+.IP [1]
+On Unix systems, a radiobutton activates whenever the mouse passes
+over it and deactivates whenever the mouse leaves the radiobutton. On
+Mac and Windows systems, when mouse button 1 is pressed over a
+radiobutton, the button activates whenever the mouse pointer is inside
+the button, and deactivates whenever the mouse pointer leaves the
+button.
+.VE
+.IP [2]
+When mouse button 1 is pressed over a radiobutton it is invoked (it
+becomes selected and the command associated with the button is
+invoked, if there is one).
+.IP [3]
+When a radiobutton has the input focus, the space key causes the radiobutton
+to be invoked.
+.PP
+If the radiobutton's state is \fBdisabled\fR then none of the above
+actions occur: the radiobutton is completely non-responsive.
+.PP
+The behavior of radiobuttons can be changed by defining new bindings for
+individual widgets or by redefining the class bindings.
+
+.SH KEYWORDS
+radiobutton, widget