summaryrefslogtreecommitdiffstats
path: root/doc/text.n
diff options
context:
space:
mode:
authordkf <donal.k.fellows@manchester.ac.uk>2008-06-30 22:57:00 (GMT)
committerdkf <donal.k.fellows@manchester.ac.uk>2008-06-30 22:57:00 (GMT)
commitd6e7f6b3743e98803d7e8c7debc709c072c6e6a5 (patch)
treed6714c53bb2368a4c8befd4c7dc0085d88b31a15 /doc/text.n
parent8ab3b0fffbe37701d924b4da873e6f231a843e5f (diff)
downloadtk-d6e7f6b3743e98803d7e8c7debc709c072c6e6a5.zip
tk-d6e7f6b3743e98803d7e8c7debc709c072c6e6a5.tar.gz
tk-d6e7f6b3743e98803d7e8c7debc709c072c6e6a5.tar.bz2
Minor doc updates (removing out of date changebars, improving typedef formatting,
etc.)
Diffstat (limited to 'doc/text.n')
-rw-r--r--doc/text.n3081
1 files changed, 1420 insertions, 1661 deletions
diff --git a/doc/text.n b/doc/text.n
index 1a776e1..c1b0da6 100644
--- a/doc/text.n
+++ b/doc/text.n
@@ -1,3 +1,4 @@
+'\" -*- nroff -*-
'\"
'\" Copyright (c) 1992 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
@@ -5,12 +6,12 @@
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
-'\" RCS: @(#) $Id: text.n,v 1.55 2008/06/24 10:54:53 patthoyts Exp $
+'\" RCS: @(#) $Id: text.n,v 1.56 2008/06/30 22:57:03 dkf Exp $
'\"
.so man.macros
.TH text n 8.5 Tk "Tk Built-In Commands"
.BS
-'\" Note: do not modify the .SH NAME line immediately below!
+'\" Note: do not modify the .SH NAME line immediately below!
.SH NAME
text, tk_textCopy, tk_textCut, tk_textPaste \- Create and manipulate text widgets
.SH SYNOPSIS
@@ -31,1569 +32,1404 @@ text, tk_textCopy, tk_textCut, tk_textPaste \- Create and manipulate text widget
.SE
.SH "WIDGET-SPECIFIC OPTIONS"
.OP \-autoseparators autoSeparators AutoSeparators
-Specifies a boolean that says whether separators are automatically
-inserted in the undo stack. Only meaningful when the \fB\-undo\fR
-option is true.
+Specifies a boolean that says whether separators are automatically inserted in
+the undo stack. Only meaningful when the \fB\-undo\fR option is true.
.OP \-blockcursor blockCursor BlockCursor
-.VS 8.5
-Specifies a boolean that says whether the blinking insertion cursor
-should be drawn as a character-sized rectangular block. If false
-(the default) a thin vertical line is used for the insertion cursor.
-.VE 8.5
+Specifies a boolean that says whether the blinking insertion cursor should be
+drawn as a character-sized rectangular block. If false (the default) a thin
+vertical line is used for the insertion cursor.
.OP \-endline endLine EndLine
-.VS 8.5
-Specifies an integer line index representing the last line of the
-underlying textual data store that should be contained in the widget.
-This allows a text widget to reflect only a portion of a larger piece
-of text. Instead of an integer, the empty string can be provided to
-this configuration option, which will configure the widget to end
-at the very last line in the textual data store.
-.VE 8.5
+Specifies an integer line index representing the last line of the underlying
+textual data store that should be contained in the widget. This allows a text
+widget to reflect only a portion of a larger piece of text. Instead of an
+integer, the empty string can be provided to this configuration option, which
+will configure the widget to end at the very last line in the textual data
+store.
.OP \-height height Height
-Specifies the desired height for the window, in units of characters
-in the font given by the \fB\-font\fR option.
-Must be at least one.
+Specifies the desired height for the window, in units of characters in the
+font given by the \fB\-font\fR option. Must be at least one.
.OP \-inactiveselectbackground inactiveSelectBackground Foreground
-.VS 8.5
-Specifies the colour to use for the selection (the \fBsel\fR tag) when
-the window does not have the input focus. If empty, \fB{}\fR, then no
-selection is shown when the window does not have the focus.
-.VE 8.5
+Specifies the colour to use for the selection (the \fBsel\fR tag) when the
+window does not have the input focus. If empty, \fB{}\fR, then no selection is
+shown when the window does not have the focus.
.OP \-maxundo maxUndo MaxUndo
-Specifies the maximum number of compound undo actions on the undo
-stack. A zero or a negative value imply an unlimited undo stack.
+Specifies the maximum number of compound undo actions on the undo stack. A
+zero or a negative value imply an unlimited undo stack.
.OP \-spacing1 spacing1 Spacing1
-Requests additional space above each text line in the widget,
-using any of the standard forms for screen distances.
-If a line wraps, this option only applies to the first line
-on the display.
-This option may be overridden with \fB\-spacing1\fR options in
-tags.
+Requests additional space above each text line in the widget, using any of the
+standard forms for screen distances. If a line wraps, this option only applies
+to the first line on the display. This option may be overridden with
+\fB\-spacing1\fR options in tags.
.OP \-spacing2 spacing2 Spacing2
-For lines that wrap (so that they cover more than one line on the
-display) this option specifies additional space to provide between
-the display lines that represent a single line of text.
-The value may have any of the standard forms for screen distances.
-This option may be overridden with \fB\-spacing2\fR options in
-tags.
+For lines that wrap (so that they cover more than one line on the display)
+this option specifies additional space to provide between the display lines
+that represent a single line of text. The value may have any of the standard
+forms for screen distances. This option may be overridden with
+\fB\-spacing2\fR options in tags.
.OP \-spacing3 spacing3 Spacing3
-Requests additional space below each text line in the widget,
-using any of the standard forms for screen distances.
-If a line wraps, this option only applies to the last line
-on the display.
-This option may be overridden with \fB\-spacing3\fR options in
-tags.
+Requests additional space below each text line in the widget, using any of the
+standard forms for screen distances. If a line wraps, this option only applies
+to the last line on the display. This option may be overridden with
+\fB\-spacing3\fR options in tags.
.OP \-startline startLine StartLine
-.VS 8.5
-Specifies an integer line index representing the first line of the
-underlying textual data store that should be contained in the widget.
-This allows a text widget to reflect only a portion of a larger piece
-of text. Instead of an integer, the empty string can be provided to
-this configuration option, which will configure the widget to start
-at the very first line in the textual data store.
-.VE 8.5
+Specifies an integer line index representing the first line of the underlying
+textual data store that should be contained in the widget. This allows a text
+widget to reflect only a portion of a larger piece of text. Instead of an
+integer, the empty string can be provided to this configuration option, which
+will configure the widget to start at the very first line in the textual data
+store.
.OP \-state state State
-Specifies one of two states for the text: \fBnormal\fR or \fBdisabled\fR.
-If the text is disabled then characters may not be inserted or deleted
-and no insertion cursor will be displayed, even if the input focus is
-in the widget.
+Specifies one of two states for the text: \fBnormal\fR or \fBdisabled\fR. If
+the text is disabled then characters may not be inserted or deleted and no
+insertion cursor will be displayed, even if the input focus is in the widget.
.OP \-tabs tabs Tabs
-Specifies a set of tab stops for the window. The option's value consists
-of a list of screen distances giving the positions of the tab stops,
-each of which is a distance relative to the left edge of the widget
-(excluding borders, padding, etc). Each
-position may optionally be followed in the next list element
-by one of the keywords \fBleft\fR, \fBright\fR, \fBcenter\fR,
-or \fBnumeric\fR, which specifies how to justify
-text relative to the tab stop. \fBLeft\fR is the default; it causes
-the text following the tab character to be positioned with its left edge
-at the tab position. \fBRight\fR means that the right edge of the text
-following the tab character is positioned at the tab position, and
-\fBcenter\fR means that the text is centered at the tab position.
-\fBNumeric\fR means that the decimal point in the text is positioned
-at the tab position; if there is no decimal point then the least
-significant digit of the number is positioned just to the left of the
-tab position; if there is no number in the text then the text is
-right-justified at the tab position.
-For example,
+Specifies a set of tab stops for the window. The option's value consists of a
+list of screen distances giving the positions of the tab stops, each of which
+is a distance relative to the left edge of the widget (excluding borders,
+padding, etc). Each position may optionally be followed in the next list
+element by one of the keywords \fBleft\fR, \fBright\fR, \fBcenter\fR, or
+\fBnumeric\fR, which specifies how to justify text relative to the tab stop.
+\fBLeft\fR is the default; it causes the text following the tab character to
+be positioned with its left edge at the tab position. \fBRight\fR means that
+the right edge of the text following the tab character is positioned at the
+tab position, and \fBcenter\fR means that the text is centered at the tab
+position. \fBNumeric\fR means that the decimal point in the text is positioned
+at the tab position; if there is no decimal point then the least significant
+digit of the number is positioned just to the left of the tab position; if
+there is no number in the text then the text is right-justified at the tab
+position. For example,
.QW "\fB\-tabs {2c left 4c 6c center}\fR"
-creates three tab stops at two-centimeter intervals; the first two use left
+creates three tab stops at two-centimeter intervals; the first two use left
justification and the third uses center justification.
.RS
.PP
-If the list of tab stops does not have enough elements to cover all
-of the tabs in a text line, then Tk extrapolates new tab stops using
-the spacing and alignment from the last tab stop in the list. Tab
-distances must be strictly positive, and must always increase from one
-tab stop to the next (if not, an error is thrown).
-The value of the \fBtabs\fR option may be overridden by \fB\-tabs\fR
-options in tags.
+If the list of tab stops does not have enough elements to cover all of the
+tabs in a text line, then Tk extrapolates new tab stops using the spacing and
+alignment from the last tab stop in the list. Tab distances must be strictly
+positive, and must always increase from one tab stop to the next (if not, an
+error is thrown). The value of the \fBtabs\fR option may be overridden by
+\fB\-tabs\fR options in tags.
.PP
-If no \fB\-tabs\fR option is specified, or if it is specified as
-an empty list, then Tk uses default tabs spaced every eight
-(average size) characters. To achieve a different standard spacing,
-for example every 4 characters, simply configure the widget with
+If no \fB\-tabs\fR option is specified, or if it is specified as an empty
+list, then Tk uses default tabs spaced every eight (average size) characters.
+To achieve a different standard spacing, for example every 4 characters,
+simply configure the widget with
.QW "\fB\-tabs \N'34'[expr {4 * [font measure $font 0]}] left\N'34' \-tabstyle wordprocessor\fR" .
.RE
.OP \-tabstyle tabStyle TabStyle
-Specifies how to interpret the relationship between tab stops on a line
-and tabs in the text of that line. The value must be \fBtabular\fR (the
-default) or \fBwordprocessor\fR. Note that tabs are interpreted as they
-are encountered in the text. If the tab style is \fBtabular\fR then the
-\fIn\fR'th tab character in the line's text will be associated with
-the \fIn\fR'th
-tab stop defined for that line. If the tab character's x coordinate
-falls to the right of the \fIn\fR'th tab stop, then a gap of a single space
-will be inserted as a fallback. If the tab style is \fBwordprocessor\fR
-then any tab character being laid out will use (and be defined by) the
-first tab stop to the right of the preceding characters already laid out
-on that line. The value of the \fBtabstyle\fR option may be overridden
-by \fB\-tabstyle\fR options in tags.
+Specifies how to interpret the relationship between tab stops on a line and
+tabs in the text of that line. The value must be \fBtabular\fR (the default)
+or \fBwordprocessor\fR. Note that tabs are interpreted as they are encountered
+in the text. If the tab style is \fBtabular\fR then the \fIn\fR'th tab
+character in the line's text will be associated with the \fIn\fR'th tab stop
+defined for that line. If the tab character's x coordinate falls to the right
+of the \fIn\fR'th tab stop, then a gap of a single space will be inserted as a
+fallback. If the tab style is \fBwordprocessor\fR then any tab character being
+laid out will use (and be defined by) the first tab stop to the right of the
+preceding characters already laid out on that line. The value of the
+\fBtabstyle\fR option may be overridden by \fB\-tabstyle\fR options in tags.
.OP \-undo undo Undo
-Specifies a boolean that says whether the undo mechanism is active or
-not.
+Specifies a boolean that says whether the undo mechanism is active or not.
.OP \-width width Width
-Specifies the desired width for the window in units of characters
-in the font given by the \fB\-font\fR option.
-If the font does not have a uniform width then the width of the character
+Specifies the desired width for the window in units of characters in the font
+given by the \fB\-font\fR option. If the font does not have a uniform width
+then the width of the character
.QW 0
is used in translating from character units to screen units.
.OP \-wrap wrap Wrap
-Specifies how to handle lines in the text that are too long to be
-displayed in a single line of the text's window.
-The value must be \fBnone\fR or \fBchar\fR or \fBword\fR.
-A wrap mode of \fBnone\fR means that each line of text appears as
-exactly one line on the screen; extra characters that do not fit
-on the screen are not displayed.
-In the other modes each line of text will be broken up into several
-screen lines if necessary to keep all the characters visible.
-In \fBchar\fR mode a screen line break may occur after any character;
-in \fBword\fR mode a line break will only be made at word boundaries.
+Specifies how to handle lines in the text that are too long to be displayed in
+a single line of the text's window. The value must be \fBnone\fR or \fBchar\fR
+or \fBword\fR. A wrap mode of \fBnone\fR means that each line of text appears
+as exactly one line on the screen; extra characters that do not fit on the
+screen are not displayed. In the other modes each line of text will be broken
+up into several screen lines if necessary to keep all the characters visible.
+In \fBchar\fR mode a screen line break may occur after any character; in
+\fBword\fR mode a line break will only be made at word boundaries.
.BE
-
.SH DESCRIPTION
.PP
-The \fBtext\fR command creates a new window (given by the
-\fIpathName\fR argument) and makes it into a text widget.
-Additional
-options, described above, may be specified on the command line
-or in the option database
-to configure aspects of the text such as its default background color
-and relief. The \fBtext\fR command returns the
-path name of the new window.
+The \fBtext\fR command creates a new window (given by the \fIpathName\fR
+argument) and makes it into a text widget. Additional options, described
+above, may be specified on the command line or in the option database to
+configure aspects of the text such as its default background color and relief.
+The \fBtext\fR command returns the path name of the new window.
.PP
-A text widget displays one or more lines of text and allows that
-text to be edited.
-Text widgets support four different kinds of annotations on the
-text, called tags, marks, embedded windows or embedded images.
-Tags allow different portions of the text
-to be displayed with different fonts and colors.
-In addition, Tcl commands can be associated with tags so
-that scripts are invoked when particular actions such as keystrokes
-and mouse button presses occur in particular ranges of the text.
-See \fBTAGS\fR below for more details.
+A text widget displays one or more lines of text and allows that text to be
+edited. Text widgets support four different kinds of annotations on the text,
+called tags, marks, embedded windows or embedded images. Tags allow different
+portions of the text to be displayed with different fonts and colors. In
+addition, Tcl commands can be associated with tags so that scripts are invoked
+when particular actions such as keystrokes and mouse button presses occur in
+particular ranges of the text. See \fBTAGS\fR below for more details.
.PP
-The second form of annotation consists of floating markers in the text
-called
+The second form of annotation consists of floating markers in the text called
.QW marks .
-Marks are used to keep track of various interesting positions in the
-text as it is edited.
-See \fBMARKS\fR below for more details.
+Marks are used to keep track of various interesting positions in the text as
+it is edited. See \fBMARKS\fR below for more details.
.PP
-The third form of annotation allows arbitrary windows to be
-embedded in a text widget.
-See \fBEMBEDDED WINDOWS\fR below for more details.
+The third form of annotation allows arbitrary windows to be embedded in a text
+widget. See \fBEMBEDDED WINDOWS\fR below for more details.
.PP
The fourth form of annotation allows Tk images to be embedded in a text
-widget.
-See \fBEMBEDDED IMAGES\fR below for more details.
+widget. See \fBEMBEDDED IMAGES\fR below for more details.
.PP
-The text widget also has a built-in undo/redo mechanism.
-See \fBTHE UNDO MECHANISM\fR below for more details.
+The text widget also has a built-in undo/redo mechanism. See \fBTHE UNDO
+MECHANISM\fR below for more details.
.PP
-.VS 8.5
-The text widget allows for the creation of peer widgets. These are
-other text widgets which share the same underlying data (text, marks,
-tags, images, etc). See \fBPEER WIDGETS\fR below for more details.
-.VE 8.5
+The text widget allows for the creation of peer widgets. These are other text
+widgets which share the same underlying data (text, marks, tags, images, etc).
+See \fBPEER WIDGETS\fR below for more details.
.SH INDICES
.PP
-Many of the widget commands for texts take one or more indices
-as arguments.
-An index is a string used to indicate a particular place within
-a text, such as a place to insert characters or one endpoint of a
-range of characters to delete.
-Indices have the syntax
+Many of the widget commands for texts take one or more indices as arguments.
+An index is a string used to indicate a particular place within a text, such
+as a place to insert characters or one endpoint of a range of characters to
+delete. Indices have the syntax
.CS
\fIbase modifier modifier modifier ...\fR
.CE
-Where \fIbase\fR gives a starting point and the \fImodifier\fRs
-adjust the index from the starting point (e.g. move forward or
-backward one character). Every index must contain a \fIbase\fR,
-but the \fImodifier\fRs are optional.
-.VS 8.5
-Most modifiers (as documented below) allow
-an optional submodifier. Valid submodifiers are \fBany\fR
-and \fBdisplay\fR. If the submodifier is abbreviated, then it must be
-followed by whitespace, but otherwise there need be no space between the
-submodifier and the following \fImodifier\fR. Typically the \fBdisplay\fR
-submodifier adjusts the meaning of the following \fImodifier\fR to make
-it refer to visual or non-elided units rather than logical units, but
-this is explained for each relevant case below. Lastly, where \fIcount\fR
-is used as part of a modifier, it can be positive or negative, so
+Where \fIbase\fR gives a starting point and the \fImodifier\fRs adjust the
+index from the starting point (e.g. move forward or backward one character).
+Every index must contain a \fIbase\fR, but the \fImodifier\fRs are optional.
+Most modifiers (as documented below) allow an optional submodifier. Valid
+submodifiers are \fBany\fR and \fBdisplay\fR. If the submodifier is
+abbreviated, then it must be followed by whitespace, but otherwise there need
+be no space between the submodifier and the following \fImodifier\fR.
+Typically the \fBdisplay\fR submodifier adjusts the meaning of the following
+\fImodifier\fR to make it refer to visual or non-elided units rather than
+logical units, but this is explained for each relevant case below. Lastly,
+where \fIcount\fR is used as part of a modifier, it can be positive or
+negative, so
.QW "\fIbase\fR \- \-3 lines"
is perfectly valid (and equivalent to
.QW "\fIbase\fR +3lines" ).
-.VE 8.5
.PP
The \fIbase\fR for an index must have one of the following forms:
.TP 12
\fIline\fB.\fIchar\fR
-Indicates \fIchar\fR'th character on line \fIline\fR.
-Lines are numbered from 1 for consistency with other UNIX programs
-that use this numbering scheme.
-Within a line, characters are numbered from 0.
-If \fIchar\fR is \fBend\fR then it refers to the newline character
-that ends the line.
+.
+Indicates \fIchar\fR'th character on line \fIline\fR. Lines are numbered from
+1 for consistency with other UNIX programs that use this numbering scheme.
+Within a line, characters are numbered from 0. If \fIchar\fR is \fBend\fR then
+it refers to the newline character that ends the line.
.TP 12
\fB@\fIx\fB,\fIy\fR
-Indicates the character that covers the pixel whose x and y coordinates
-within the text's window are \fIx\fR and \fIy\fR.
+.
+Indicates the character that covers the pixel whose x and y coordinates within
+the text's window are \fIx\fR and \fIy\fR.
.TP 12
\fBend\fR
-Indicates the end of the text (the character just after the last
-newline).
+.
+Indicates the end of the text (the character just after the last newline).
.TP 12
\fImark\fR
+.
Indicates the character just after the mark whose name is \fImark\fR.
.TP 12
\fItag\fB.first\fR
-Indicates the first character in the text that has been tagged with
+.
+Indicates the first character in the text that has been tagged with \fItag\fR.
+This form generates an error if no characters are currently tagged with
\fItag\fR.
-This form generates an error if no characters are currently tagged
-with \fItag\fR.
.TP 12
\fItag\fB.last\fR
-Indicates the character just after the last one in the text that has
-been tagged with \fItag\fR.
-This form generates an error if no characters are currently tagged
-with \fItag\fR.
+.
+Indicates the character just after the last one in the text that has been
+tagged with \fItag\fR. This form generates an error if no characters are
+currently tagged with \fItag\fR.
.TP 12
\fIpathName\fR
-Indicates the position of the embedded window whose name is
-\fIpathName\fR.
-This form generates an error if there is no embedded window
-by the given name.
+.
+Indicates the position of the embedded window whose name is \fIpathName\fR.
+This form generates an error if there is no embedded window by the given name.
.TP 12
\fIimageName\fR
-Indicates the position of the embedded image whose name is
-\fIimageName\fR.
-This form generates an error if there is no embedded image
-by the given name.
+.
+Indicates the position of the embedded image whose name is \fIimageName\fR.
+This form generates an error if there is no embedded image by the given name.
.PP
-If the \fIbase\fR could match more than one of the above forms, such
-as a \fImark\fR and \fIimageName\fR both having the same value, then
-the form earlier in the above list takes precedence.
-If modifiers follow the base index, each one of them must have one
-of the forms listed below. Keywords such as \fBchars\fR and \fBwordend\fR
-may be abbreviated as long as the abbreviation is unambiguous.
+If the \fIbase\fR could match more than one of the above forms, such as a
+\fImark\fR and \fIimageName\fR both having the same value, then the form
+earlier in the above list takes precedence. If modifiers follow the base
+index, each one of them must have one of the forms listed below. Keywords such
+as \fBchars\fR and \fBwordend\fR may be abbreviated as long as the
+abbreviation is unambiguous.
.TP
\fB+ \fIcount\fR ?\fIsubmodifier\fR? \fBchars\fR
-.VS 8.5
-Adjust the index forward by \fIcount\fR characters, moving to later lines
-in the text if necessary. If there are fewer than \fIcount\fR characters
-in the text after the current index, then set the index to the last index
-in the text. Spaces on either side of \fIcount\fR are optional. If the
-\fBdisplay\fR submodifier is given, elided characters are skipped over
-without being counted. If \fBany\fR is given, then all characters are
-counted. For historical reasons, if neither modifier is given then the
-count actually takes place in units of index positions (see \fBindices\fR
-for details). This behaviour may be changed in a future major release,
-so if you need an index count, you are encouraged to use \fBindices\fR
-instead wherever possible.
-.VE 8.5
+.
+Adjust the index forward by \fIcount\fR characters, moving to later lines in
+the text if necessary. If there are fewer than \fIcount\fR characters in the
+text after the current index, then set the index to the last index in the
+text. Spaces on either side of \fIcount\fR are optional. If the \fBdisplay\fR
+submodifier is given, elided characters are skipped over without being
+counted. If \fBany\fR is given, then all characters are counted. For
+historical reasons, if neither modifier is given then the count actually takes
+place in units of index positions (see \fBindices\fR for details). This
+behaviour may be changed in a future major release, so if you need an index
+count, you are encouraged to use \fBindices\fR instead wherever possible.
.TP
\fB\- \fIcount\fR ?\fIsubmodifier\fR? \fBchars\fR
-Adjust the index backward by \fIcount\fR characters, moving to earlier
-lines in the text if necessary. If there are fewer than \fIcount\fR
-characters in the text before the current index, then set the index to
-.VS 8.5
-the first index in the text (1.0). Spaces on either side of \fIcount\fR
-are optional. If the \fBdisplay\fR submodifier is given, elided
-characters are skipped over without being counted. If \fBany\fR is
-given, then all characters are counted. For historical reasons, if
-neither modifier is given then the count actually takes place in units of
-index positions (see \fBindices\fR for details). This behaviour may be
-changed in a future major release, so if you need an index count, you are
-encouraged to use \fBindices\fR instead wherever possible.
-.VE 8.5
+.
+Adjust the index backward by \fIcount\fR characters, moving to earlier lines
+in the text if necessary. If there are fewer than \fIcount\fR characters in
+the text before the current index, then set the index to the first index in
+the text (1.0). Spaces on either side of \fIcount\fR are optional. If the
+\fBdisplay\fR submodifier is given, elided characters are skipped over without
+being counted. If \fBany\fR is given, then all characters are counted. For
+historical reasons, if neither modifier is given then the count actually takes
+place in units of index positions (see \fBindices\fR for details). This
+behavior may be changed in a future major release, so if you need an index
+count, you are encouraged to use \fBindices\fR instead wherever possible.
.TP
\fB+ \fIcount\fR ?\fIsubmodifier\fR? \fBindices\fR
-.VS 8.5
-Adjust the index forward by \fIcount\fR index positions, moving to later
-lines in the text if necessary. If there are fewer than \fIcount\fR
-index positions in the text after the current index, then set the index
-to the last index position in the text. Spaces on either side of
-\fIcount\fR are optional. Note that an index position is either a single
-character or a single embedded image or embedded window. If the
-\fBdisplay\fR submodifier is given, elided indices are skipped over
-without being counted. If \fBany\fR is given, then all indices are
-counted; this is also the default behaviour if no modifier is given.
-.VE 8.5
+.
+Adjust the index forward by \fIcount\fR index positions, moving to later lines
+in the text if necessary. If there are fewer than \fIcount\fR index positions
+in the text after the current index, then set the index to the last index
+position in the text. Spaces on either side of \fIcount\fR are optional. Note
+that an index position is either a single character or a single embedded image
+or embedded window. If the \fBdisplay\fR submodifier is given, elided indices
+are skipped over without being counted. If \fBany\fR is given, then all
+indices are counted; this is also the default behaviour if no modifier is
+given.
.TP
\fB\- \fIcount\fR ?\fIsubmodifier\fR? \fBindices\fR
-.VS 8.5
-Adjust the index backward by \fIcount\fR index positions, moving to
-earlier lines in the text if necessary. If there are fewer than
-\fIcount\fR index positions in the text before the current index, then
-set the index to the first index position (1.0) in the text. Spaces on
-either side of \fIcount\fR are optional. If the \fBdisplay\fR
-submodifier is given, elided indices are skipped over without being
-counted. If \fBany\fR is given, then all indices are counted; this is
-also the default behaviour if no modifier is given.
-.VE 8.5
+.
+Adjust the index backward by \fIcount\fR index positions, moving to earlier
+lines in the text if necessary. If there are fewer than \fIcount\fR index
+positions in the text before the current index, then set the index to the
+first index position (1.0) in the text. Spaces on either side of \fIcount\fR
+are optional. If the \fBdisplay\fR submodifier is given, elided indices are
+skipped over without being counted. If \fBany\fR is given, then all indices
+are counted; this is also the default behaviour if no modifier is given.
.TP
\fB+ \fIcount\fR ?\fIsubmodifier\fR? \fBlines\fR
-.VS 8.5
-Adjust the index forward by \fIcount\fR lines, retaining the same
-character position within the line. If there are fewer than \fIcount\fR
-lines after the line containing the current index, then set the index to
-refer to the same character position on the last line of the text. Then,
-if the line is not long enough to contain a character at the indicated
-character position, adjust the character position to refer to the last
-character of the line (the newline). Spaces on either side of
-\fIcount\fR are optional. If the \fBdisplay\fR submodifier is given,
-then each visual display line is counted separately. Otherwise, if
-\fBany\fR (or no modifier) is given, then each logical line (no matter
-how many times it is visually wrapped) counts just once. If the relevant
-lines are not wrapped, then these two methods of counting are equivalent.
-.VE 8.5
+.
+Adjust the index forward by \fIcount\fR lines, retaining the same character
+position within the line. If there are fewer than \fIcount\fR lines after the
+line containing the current index, then set the index to refer to the same
+character position on the last line of the text. Then, if the line is not long
+enough to contain a character at the indicated character position, adjust the
+character position to refer to the last character of the line (the newline).
+Spaces on either side of \fIcount\fR are optional. If the \fBdisplay\fR
+submodifier is given, then each visual display line is counted separately.
+Otherwise, if \fBany\fR (or no modifier) is given, then each logical line (no
+matter how many times it is visually wrapped) counts just once. If the
+relevant lines are not wrapped, then these two methods of counting are
+equivalent.
.TP
\fB\- \fIcount\fR ?\fIsubmodifier\fR? \fBlines\fR
-.VS 8.5
-Adjust the index backward by \fIcount\fR logical lines, retaining the
-same character position within the line. If there are fewer than
-\fIcount\fR lines before the line containing the current index, then set
-the index to refer to the same character position on the first line of
-the text. Then, if the line is not long enough to contain a character at
-the indicated character position, adjust the character position to refer
-to the last character of the line (the newline). Spaces on either side
-of \fIcount\fR are optional. If the \fBdisplay\fR submodifier is given,
-then each visual display line is counted separately. Otherwise, if
-\fBany\fR (or no modifier) is given, then each logical line (no matter
-how many times it is visually wrapped) counts just once. If the relevant
-lines are not wrapped, then these two methods of counting are equivalent.
-.VE 8.5
+.
+Adjust the index backward by \fIcount\fR logical lines, retaining the same
+character position within the line. If there are fewer than \fIcount\fR lines
+before the line containing the current index, then set the index to refer to
+the same character position on the first line of the text. Then, if the line
+is not long enough to contain a character at the indicated character position,
+adjust the character position to refer to the last character of the line (the
+newline). Spaces on either side of \fIcount\fR are optional. If the
+\fBdisplay\fR submodifier is given, then each visual display line is counted
+separately. Otherwise, if \fBany\fR (or no modifier) is given, then each
+logical line (no matter how many times it is visually wrapped) counts just
+once. If the relevant lines are not wrapped, then these two methods of
+counting are equivalent.
.TP
?\fIsubmodifier\fR? \fBlinestart\fR
-.VS 8.5
-Adjust the index to refer to the first index on the line. If the
-\fBdisplay\fR submodifier is given, this is the first index on the
-display line, otherwise on the logical line.
-.VE 8.5
+.
+Adjust the index to refer to the first index on the line. If the \fBdisplay\fR
+submodifier is given, this is the first index on the display line, otherwise
+on the logical line.
.TP
?\fIsubmodifier\fR? \fBlineend\fR
-.VS 8.5
-Adjust the index to refer to the last index on the line (the
-newline). If the \fBdisplay\fR submodifier is given, this is the last
-index on the display line, otherwise on the logical line.
-.VE 8.5
+.
+Adjust the index to refer to the last index on the line (the newline). If the
+\fBdisplay\fR submodifier is given, this is the last index on the display
+line, otherwise on the logical line.
.TP
?\fIsubmodifier\fR? \fBwordstart\fR
-.VS 8.5
-Adjust the index to refer to the first character of the word containing
-the current index. A word consists of any number of adjacent characters
-that are letters, digits, or underscores, or a single character that is
-not one of these. If the \fBdisplay\fR submodifier is given, this only
-examines non-elided characters, otherwise all characters (elided or not)
-are examined.
-.VE 8.5
+.
+Adjust the index to refer to the first character of the word containing the
+current index. A word consists of any number of adjacent characters that are
+letters, digits, or underscores, or a single character that is not one of
+these. If the \fBdisplay\fR submodifier is given, this only examines
+non-elided characters, otherwise all characters (elided or not) are examined.
.TP
?\fIsubmodifier\fR? \fBwordend\fR
-.VS 8.5
-Adjust the index to refer to the character just after the last one of the
-word containing the current index. If the current index refers to the
-last character of the text then it is not modified. If the \fBdisplay\fR
-submodifier is given, this only examines non-elided characters, otherwise
-all characters (elided or not) are examined.
+.
+Adjust the index to refer to the character just after the last one of the word
+containing the current index. If the current index refers to the last
+character of the text then it is not modified. If the \fBdisplay\fR
+submodifier is given, this only examines non-elided characters, otherwise all
+characters (elided or not) are examined.
.PP
-If more than one modifier is present then they are applied in
-left-to-right order. For example, the index
+If more than one modifier is present then they are applied in left-to-right
+order. For example, the index
.QW "\fBend \- 1 chars\fR"
refers to the next-to-last character in the text and
.QW "\fBinsert wordstart \- 1 c\fR"
-refers to the character just before
-the first one in the word containing the insertion cursor. Modifiers
-are applied one by one in this left to right order, and after each step
-the resulting index is constrained to be a valid index in the text
-widget. So, for example, the index
+refers to the character just before the first one in the word containing the
+insertion cursor. Modifiers are applied one by one in this left to right
+order, and after each step the resulting index is constrained to be a valid
+index in the text widget. So, for example, the index
.QW "\fB1.0 \-1c +1c\fR"
refers to the index
.QW \fB2.0\fR .
.PP
-Where modifiers result in index changes by display lines, display chars
-or display indices, and the \fIbase\fR refers to an index inside an
-elided tag,
+Where modifiers result in index changes by display lines, display chars or
+display indices, and the \fIbase\fR refers to an index inside an elided tag,
that base index is considered to be equivalent to the first following
non-elided index.
-.VE 8.5
.SH TAGS
.PP
-The first form of annotation in text widgets is a tag.
-A tag is a textual string that is associated with some of the characters
-in a text.
-Tags may contain arbitrary characters, but it is probably best to
-avoid using the characters
+The first form of annotation in text widgets is a tag. A tag is a textual
+string that is associated with some of the characters in a text. Tags may
+contain arbitrary characters, but it is probably best to avoid using the
+characters
.QW " "
-(space), \fB+\fR, or \fB\-\fR:
-these characters have special meaning in indices, so tags containing
-them cannot be used as indices.
-There may be any number of tags associated with characters in a
-text.
-Each tag may refer to a single character, a range of characters, or
-several ranges of characters.
-An individual character may have any number of tags associated with it.
+(space), \fB+\fR, or \fB\-\fR: these characters have special meaning in
+indices, so tags containing them cannot be used as indices. There may be any
+number of tags associated with characters in a text. Each tag may refer to a
+single character, a range of characters, or several ranges of characters. An
+individual character may have any number of tags associated with it.
.PP
-A priority order is defined among tags, and this order is used in
-implementing some of the tag-related functions described below.
-When a tag is defined (by associating it with characters or setting
-its display options or binding commands to it), it is given
-a priority higher than any existing tag.
-The priority order of tags may be redefined using the
+A priority order is defined among tags, and this order is used in implementing
+some of the tag-related functions described below. When a tag is defined (by
+associating it with characters or setting its display options or binding
+commands to it), it is given a priority higher than any existing tag. The
+priority order of tags may be redefined using the
.QW "\fIpathName \fBtag raise\fR"
and
.QW "\fIpathName \fBtag lower\fR"
widget commands.
.PP
-Tags serve three purposes in text widgets.
-First, they control the way information is displayed on the screen.
-By default, characters are displayed as determined by the
-\fB\-background\fR, \fB\-font\fR, and \fB\-foreground\fR options for the
-text widget.
-However, display options may be associated with individual tags
-using the
+Tags serve three purposes in text widgets. First, they control the way
+information is displayed on the screen. By default, characters are displayed
+as determined by the \fB\-background\fR, \fB\-font\fR, and \fB\-foreground\fR
+options for the text widget. However, display options may be associated with
+individual tags using the
.QW "\fIpathName \fBtag configure\fR"
-widget command.
-If a character has been tagged, then the display options associated
-with the tag override the default display style.
-The following options are currently supported for tags:
+widget command. If a character has been tagged, then the display options
+associated with the tag override the default display style. The following
+options are currently supported for tags:
.TP
\fB\-background \fIcolor\fR
-\fIColor\fR specifies the background color to use for characters
-associated with the tag.
-It may have any of the forms accepted by \fBTk_GetColor\fR.
+.
+\fIColor\fR specifies the background color to use for characters associated
+with the tag. It may have any of the forms accepted by \fBTk_GetColor\fR.
.TP
\fB\-bgstipple \fIbitmap\fR
-\fIBitmap\fR specifies a bitmap that is used as a stipple pattern
-for the background.
-It may have any of the forms accepted by \fBTk_GetBitmap\fR.
-If \fIbitmap\fR has not been specified, or if it is specified
-as an empty string, then a solid fill will be used for the
-background.
+.
+\fIBitmap\fR specifies a bitmap that is used as a stipple pattern for the
+background. It may have any of the forms accepted by \fBTk_GetBitmap\fR. If
+\fIbitmap\fR has not been specified, or if it is specified as an empty string,
+then a solid fill will be used for the background.
.TP
\fB\-borderwidth \fIpixels\fR
-\fIPixels\fR specifies the width of a border to draw around
-the tag using any of the forms accepted by \fBTk_GetPixels\fR.
-This option should be used in conjuction with the
-\fB\-relief\fR option to provide the desired border.
+.
+\fIPixels\fR specifies the width of a border to draw around the tag using any
+of the forms accepted by \fBTk_GetPixels\fR. This option should be used in
+conjuction with the \fB\-relief\fR option to provide the desired border.
.TP
\fB\-elide \fIboolean\fR
-\fIElide\fR specifies whether the data should
-be elided. Elided data (characters, images, embedded windows, etc) is
-not displayed and takes no space on screen, but further on behaves just
-as normal data.
+.
+\fIElide\fR specifies whether the data should be elided. Elided data
+(characters, images, embedded windows, etc.) is not displayed and takes no
+space on screen, but further on behaves just as normal data.
.TP
\fB\-fgstipple \fIbitmap\fR
-\fIBitmap\fR specifies a bitmap that is used as a stipple pattern
-when drawing text and other foreground information such as
-underlines.
-It may have any of the forms accepted by \fBTk_GetBitmap\fR.
-If \fIbitmap\fR has not been specified, or if it is specified
-as an empty string, then a solid fill will be used.
+.
+\fIBitmap\fR specifies a bitmap that is used as a stipple pattern when drawing
+text and other foreground information such as underlines. It may have any of
+the forms accepted by \fBTk_GetBitmap\fR. If \fIbitmap\fR has not been
+specified, or if it is specified as an empty string, then a solid fill will be
+used.
.TP
\fB\-font \fIfontName\fR
-\fIFontName\fR is the name of a font to use for drawing characters.
-It may have any of the forms accepted by \fBTk_GetFont\fR.
+.
+\fIFontName\fR is the name of a font to use for drawing characters. It may
+have any of the forms accepted by \fBTk_GetFont\fR.
.TP
\fB\-foreground \fIcolor\fR
-\fIColor\fR specifies the color to use when drawing text and other
-foreground information such as underlines.
-It may have any of the forms accepted by \fBTk_GetColor\fR.
+.
+\fIColor\fR specifies the color to use when drawing text and other foreground
+information such as underlines. It may have any of the forms accepted by
+\fBTk_GetColor\fR.
.TP
\fB\-justify \fIjustify\fR
+.
If the first non-elided character of a display line has a tag for which this
-option has been specified, then \fIjustify\fR determines how to
-justify the line.
-It must be one of \fBleft\fR, \fBright\fR, or \fBcenter\fR.
-If a line wraps, then the justification for each line on the
-display is determined by the first non-elided character of that display line.
+option has been specified, then \fIjustify\fR determines how to justify the
+line. It must be one of \fBleft\fR, \fBright\fR, or \fBcenter\fR. If a line
+wraps, then the justification for each line on the display is determined by
+the first non-elided character of that display line.
.TP
\fB\-lmargin1 \fIpixels\fR
+.
If the first non-elided character of a text line has a tag for which this
-option has been specified, then \fIpixels\fR specifies how
-much the line should be indented from the left edge of the
-window.
-\fIPixels\fR may have any of the standard forms for screen
-distances.
-If a line of text wraps, this option only applies to the
-first line on the display; the \fB\-lmargin2\fR option controls
-the indentation for subsequent lines.
+option has been specified, then \fIpixels\fR specifies how much the line
+should be indented from the left edge of the window. \fIPixels\fR may have any
+of the standard forms for screen distances. If a line of text wraps, this
+option only applies to the first line on the display; the \fB\-lmargin2\fR
+option controls the indentation for subsequent lines.
.TP
\fB\-lmargin2 \fIpixels\fR
+.
If the first non-elided character of a display line has a tag for which this
-option has been specified, and if the display line is not the
-first for its text line (i.e., the text line has wrapped), then
-\fIpixels\fR specifies how much the line should be indented from
-the left edge of the window.
-\fIPixels\fR may have any of the standard forms for screen
-distances.
-This option is only used when wrapping is enabled, and it only
-applies to the second and later display lines for a text line.
+option has been specified, and if the display line is not the first for its
+text line (i.e., the text line has wrapped), then \fIpixels\fR specifies how
+much the line should be indented from the left edge of the window.
+\fIPixels\fR may have any of the standard forms for screen distances. This
+option is only used when wrapping is enabled, and it only applies to the
+second and later display lines for a text line.
.TP
\fB\-offset \fIpixels\fR
-\fIPixels\fR specifies an amount by which the text's baseline
-should be offset vertically from the baseline of the overall
-line, in pixels.
-For example, a positive offset can be used for superscripts
-and a negative offset can be used for subscripts.
-\fIPixels\fR may have any of the standard forms for screen
+.
+\fIPixels\fR specifies an amount by which the text's baseline should be offset
+vertically from the baseline of the overall line, in pixels. For example, a
+positive offset can be used for superscripts and a negative offset can be used
+for subscripts. \fIPixels\fR may have any of the standard forms for screen
distances.
.TP
\fB\-overstrike \fIboolean\fR
-Specifies whether or not to draw a horizontal rule through
-the middle of characters.
-\fIBoolean\fR may have any of the forms accepted by \fBTcl_GetBoolean\fR.
+.
+Specifies whether or not to draw a horizontal rule through the middle of
+characters. \fIBoolean\fR may have any of the forms accepted by
+\fBTcl_GetBoolean\fR.
.TP
\fB\-relief \fIrelief\fR
-\fIRelief\fR specifies the relief style to use for drawing the border,
-in any of the forms accepted by \fBTk_GetRelief\fR.
-This option is used in conjunction with the \fB\-borderwidth\fR
-option to enable to the desired border appearance.
+.
+\fIRelief\fR specifies the relief style to use for drawing the border, in any
+of the forms accepted by \fBTk_GetRelief\fR. This option is used in
+conjunction with the \fB\-borderwidth\fR option to enable to the desired
+border appearance.
.TP
\fB\-rmargin \fIpixels\fR
+.
If the first non-elided character of a display line has a tag for which this
-option has been specified, then \fIpixels\fR specifies how wide
-a margin to leave between the end of the line and the right
-edge of the window.
-\fIPixels\fR may have any of the standard forms for screen
-distances.
-This option is only used when wrapping is enabled.
-If a text line wraps, the right margin for each line on the
-display is determined by the first non-elided character of that display
-line.
+option has been specified, then \fIpixels\fR specifies how wide a margin to
+leave between the end of the line and the right edge of the window.
+\fIPixels\fR may have any of the standard forms for screen distances. This
+option is only used when wrapping is enabled. If a text line wraps, the right
+margin for each line on the display is determined by the first non-elided
+character of that display line.
.TP
\fB\-spacing1 \fIpixels\fR
-\fIPixels\fR specifies how much additional space should be
-left above each text line, using any of the standard forms for
-screen distances.
-If a line wraps, this option only applies to the first
-line on the display.
+.
+\fIPixels\fR specifies how much additional space should be left above each
+text line, using any of the standard forms for screen distances. If a line
+wraps, this option only applies to the first line on the display.
.TP
\fB\-spacing2 \fIpixels\fR
-For lines that wrap, this option specifies how much additional
-space to leave between the display lines for a single text line.
-\fIPixels\fR may have any of the standard forms for screen
-distances.
+.
+For lines that wrap, this option specifies how much additional space to leave
+between the display lines for a single text line. \fIPixels\fR may have any of
+the standard forms for screen distances.
.TP
\fB\-spacing3 \fIpixels\fR
-\fIPixels\fR specifies how much additional space should be
-left below each text line, using any of the standard forms for
-screen distances.
-If a line wraps, this option only applies to the last
-line on the display.
+.
+\fIPixels\fR specifies how much additional space should be left below each
+text line, using any of the standard forms for screen distances. If a line
+wraps, this option only applies to the last line on the display.
.TP
\fB\-tabs \fItabList\fR
-\fITabList\fR specifies a set of tab stops in the same form
-as for the \fB\-tabs\fR option for the text widget. This
-option only applies to a display line if it applies to the
-first non-elided character on that display line.
-If this option is specified as an empty string, it cancels
-the option, leaving it unspecified for the tag (the default).
-If the option is specified as a non-empty string that is
-an empty list, such as \fB\-tags\0{\0}\fR, then it requests
-default 8-character tabs as described for the \fB\-tags\fR
-widget option.
+.
+\fITabList\fR specifies a set of tab stops in the same form as for the
+\fB\-tabs\fR option for the text widget. This option only applies to a display
+line if it applies to the first non-elided character on that display line. If
+this option is specified as an empty string, it cancels the option, leaving it
+unspecified for the tag (the default). If the option is specified as a
+non-empty string that is an empty list, such as \fB\-tags\0{\0}\fR, then it
+requests default 8-character tabs as described for the \fB\-tags\fR widget
+option.
.TP
\fB\-tabstyle \fIstyle\fR
-\fIStyle\fR specifies either the \fItabular\fR or
-\fIwordprocessor\fR style of tabbing to use for the text widget.
-This option only applies to a display line if it applies to the
-first non-elided character on that display line.
-If this option is specified as an empty string, it cancels
-the option, leaving it unspecified for the tag (the default).
+.
+\fIStyle\fR specifies either the \fItabular\fR or \fIwordprocessor\fR style of
+tabbing to use for the text widget. This option only applies to a display line
+if it applies to the first non-elided character on that display line. If this
+option is specified as an empty string, it cancels the option, leaving it
+unspecified for the tag (the default).
.TP
\fB\-underline \fIboolean\fR
+.
\fIBoolean\fR specifies whether or not to draw an underline underneath
-characters.
-It may have any of the forms accepted by \fBTcl_GetBoolean\fR.
+characters. It may have any of the forms accepted by \fBTcl_GetBoolean\fR.
.TP
\fB\-wrap \fImode\fR
-\fIMode\fR specifies how to handle lines that are wider than the
-text's window.
-It has the same legal values as the \fB\-wrap\fR option
-for the text widget: \fBnone\fR, \fBchar\fR, or \fBword\fR.
-If this tag option is specified, it overrides the \fB\-wrap\fR option
-for the text widget.
+.
+\fIMode\fR specifies how to handle lines that are wider than the text's
+window. It has the same legal values as the \fB\-wrap\fR option for the text
+widget: \fBnone\fR, \fBchar\fR, or \fBword\fR. If this tag option is
+specified, it overrides the \fB\-wrap\fR option for the text widget.
.PP
-If a character has several tags associated with it, and if their
-display options conflict, then the options of the highest priority
-tag are used.
-If a particular display option has not been specified for a
-particular tag, or if it is specified as an empty string, then
-that option will never be used; the next-highest-priority
-tag's option will used instead.
-If no tag specifies a particular display option, then the default
-style for the widget will be used.
+If a character has several tags associated with it, and if their display
+options conflict, then the options of the highest priority tag are used. If a
+particular display option has not been specified for a particular tag, or if
+it is specified as an empty string, then that option will never be used; the
+next-highest-priority tag's option will used instead. If no tag specifies a
+particular display option, then the default style for the widget will be used.
.PP
-The second purpose for tags is event bindings.
-You can associate bindings with a tag in much the same way you can
-associate bindings with a widget class: whenever particular X
-events occur on characters with the given tag, a given
-Tcl command will be executed.
-Tag bindings can be used to give behaviors to ranges of characters;
-among other things, this allows hypertext-like
-features to be implemented.
-For details, see the description of the
+The second purpose for tags is event bindings. You can associate bindings with
+a tag in much the same way you can associate bindings with a widget class:
+whenever particular X events occur on characters with the given tag, a given
+Tcl command will be executed. Tag bindings can be used to give behaviors to
+ranges of characters; among other things, this allows hypertext-like features
+to be implemented. For details, see the description of the
.QW "\fIpathName \fBtag bind\fR"
-widget command below.
-.VS 8.5
-Tag bindings are shared between all peer widgets
+widget command below. Tag bindings are shared between all peer widgets
(including any bindings for the special \fBsel\fR tag).
-.VE 8.5
.PP
-The third use for tags is in managing the selection.
-See \fBTHE SELECTION\fR below.
-.VS 8.5
-With the exception of the special \fBsel\fR
-tag, all tags are shared between peer text widgets, and may be
-manipulated on an equal basis from any such widget. The \fBsel\fR
-tag exists separately and independently in each peer text widget (but
-any tag bindings to \fBsel\fR are shared).
-.VE 8.5
+The third use for tags is in managing the selection. See \fBTHE SELECTION\fR
+below. With the exception of the special \fBsel\fR tag, all tags are shared
+between peer text widgets, and may be manipulated on an equal basis from any
+such widget. The \fBsel\fR tag exists separately and independently in each
+peer text widget (but any tag bindings to \fBsel\fR are shared).
.SH MARKS
.PP
-The second form of annotation in text widgets is a mark.
-Marks are used for remembering particular places in a text.
-They are something like tags, in that they have names and
-they refer to places in the file, but a mark is not associated
-with particular characters.
-Instead, a mark is associated with the gap between two characters.
-Only a single position may be associated with a mark at any given
-time.
-If the characters around a mark are deleted the mark will still
-remain; it will just have new neighbor characters.
-In contrast, if the characters containing a tag are deleted then
-the tag will no longer have an association with characters in
-the file.
-Marks may be manipulated with the
+The second form of annotation in text widgets is a mark. Marks are used for
+remembering particular places in a text. They are something like tags, in that
+they have names and they refer to places in the file, but a mark is not
+associated with particular characters. Instead, a mark is associated with the
+gap between two characters. Only a single position may be associated with a
+mark at any given time. If the characters around a mark are deleted the mark
+will still remain; it will just have new neighbor characters. In contrast, if
+the characters containing a tag are deleted then the tag will no longer have
+an association with characters in the file. Marks may be manipulated with the
.QW "\fIpathName \fBmark\fR"
-widget
-command, and their current locations may be determined by using the
+widget command, and their current locations may be determined by using the
mark name as an index in widget commands.
.PP
Each mark also has a
.QW gravity ,
-which is either \fBleft\fR or \fBright\fR.
-The gravity for a mark specifies what happens to the mark when
-text is inserted at the point of the mark.
-If a mark has left gravity, then the mark is treated as if it
-were attached to the character on its left, so the mark will
-remain to the left of any text inserted at the mark position.
-If the mark has right gravity, new text inserted at the mark
-position will appear to the left of the mark (so that the mark
-remains rightmost). The gravity for a mark defaults to \fBright\fR.
+which is either \fBleft\fR or \fBright\fR. The gravity for a mark specifies
+what happens to the mark when text is inserted at the point of the mark. If a
+mark has left gravity, then the mark is treated as if it were attached to the
+character on its left, so the mark will remain to the left of any text
+inserted at the mark position. If the mark has right gravity, new text
+inserted at the mark position will appear to the left of the mark (so that the
+mark remains rightmost). The gravity for a mark defaults to \fBright\fR.
.PP
-The name space for marks is different from that for tags: the
-same name may be used for both a mark and a tag, but they will refer
-to different things.
+The name space for marks is different from that for tags: the same name may be
+used for both a mark and a tag, but they will refer to different things.
.PP
-Two marks have special significance.
-First, the mark \fBinsert\fR is associated with the insertion cursor,
-as described under \fBTHE INSERTION CURSOR\fR below.
-Second, the mark \fBcurrent\fR is associated with the character
-closest to the mouse and is adjusted automatically to track the
-mouse position and any changes to the text in the widget (one
-exception: \fBcurrent\fR is not updated in response to mouse
-motions if a mouse button is down; the update will be deferred
-until all mouse buttons have been released).
-Neither of these special marks may be deleted.
-.VS 8.5
-With the exception of
-these two special marks, all marks are shared between peer text
-widgets, and may be manipulated on an equal basis from any peer.
-.VE 8.5
+Two marks have special significance. First, the mark \fBinsert\fR is
+associated with the insertion cursor, as described under \fBTHE INSERTION
+CURSOR\fR below. Second, the mark \fBcurrent\fR is associated with the
+character closest to the mouse and is adjusted automatically to track the
+mouse position and any changes to the text in the widget (one exception:
+\fBcurrent\fR is not updated in response to mouse motions if a mouse button is
+down; the update will be deferred until all mouse buttons have been released).
+Neither of these special marks may be deleted. With the exception of these two
+special marks, all marks are shared between peer text widgets, and may be
+manipulated on an equal basis from any peer.
.SH "EMBEDDED WINDOWS"
.PP
-The third form of annotation in text widgets is an embedded window.
-Each embedded window annotation causes a window to be displayed
-at a particular point in the text.
-There may be any number of embedded windows in a text widget,
-and any widget may be used as an embedded window (subject to the
-usual rules for geometry management, which require the text window
-to be the parent of the embedded window or a descendant of its
-parent).
-The embedded window's position on the screen will be updated as the
-text is modified or scrolled, and it will be mapped and unmapped as
-it moves into and out of the visible area of the text widget.
-Each embedded window occupies one
-.VS 8.5
-unit's
-.VE 8.5
-worth of index space
-in the text widget, and it may be referred to either by the name
-of its embedded window or by its position in the widget's
-index space.
-If the range of text containing the embedded window is deleted then
-the window is destroyed.
-.VS 8.5
-Similarly if the text widget as a whole is deleted, then the window is
-destroyed.
-.VE 8.5
+The third form of annotation in text widgets is an embedded window. Each
+embedded window annotation causes a window to be displayed at a particular
+point in the text. There may be any number of embedded windows in a text
+widget, and any widget may be used as an embedded window (subject to the usual
+rules for geometry management, which require the text window to be the parent
+of the embedded window or a descendant of its parent). The embedded window's
+position on the screen will be updated as the text is modified or scrolled,
+and it will be mapped and unmapped as it moves into and out of the visible
+area of the text widget. Each embedded window occupies one unit's worth of
+index space in the text widget, and it may be referred to either by the name
+of its embedded window or by its position in the widget's index space. If the
+range of text containing the embedded window is deleted then the window is
+destroyed. Similarly if the text widget as a whole is deleted, then the window
+is destroyed.
.PP
-When an embedded window is added to a text widget with the
-\fIpathName \fBwindow create\fR widget command, several configuration
-options may be associated with it.
-These options may be modified later with the \fIpathName \fBwindow configure\fR
-widget command.
-The following options are currently supported:
+When an embedded window is added to a text widget with the \fIpathName
+\fBwindow create\fR widget command, several configuration options may be
+associated with it. These options may be modified later with the \fIpathName
+\fBwindow configure\fR widget command. The following options are currently
+supported:
.TP
\fB\-align \fIwhere\fR
-If the window is not as tall as the line in which it is displayed,
-this option determines where the window is displayed in the line.
-\fIWhere\fR must have one of the values \fBtop\fR (align the top of the window
-with the top of the line), \fBcenter\fR (center the window
-within the range of the line), \fBbottom\fR (align the bottom of the
-window with the bottom of the line's area),
-or \fBbaseline\fR (align the bottom of the window with the baseline
-of the line).
+.
+If the window is not as tall as the line in which it is displayed, this option
+determines where the window is displayed in the line. \fIWhere\fR must have
+one of the values \fBtop\fR (align the top of the window with the top of the
+line), \fBcenter\fR (center the window within the range of the line),
+\fBbottom\fR (align the bottom of the window with the bottom of the line's
+area), or \fBbaseline\fR (align the bottom of the window with the baseline of
+the line).
.TP
\fB\-create \fIscript\fR
-Specifies a Tcl script that may be evaluated to create the window
-for the annotation.
-If no \fB\-window\fR option has been specified for the annotation
-this script will be evaluated when the annotation is about to
-be displayed on the screen.
-\fIScript\fR must create a window for the annotation and return
-the name of that window as its result.
-.VS 8.5
-Two substitutions will be performed in \fIscript\fR before evaluation.
-\fI%W\fR will be substituted by the name of the parent text widget,
-and \fI%%\fR will be substituted by a single \fI%\fR.
-.VE 8.5
-If the annotation's window should ever be deleted, \fIscript\fR
-will be evaluated again the next time the annotation is displayed.
+.
+Specifies a Tcl script that may be evaluated to create the window for the
+annotation. If no \fB\-window\fR option has been specified for the annotation
+this script will be evaluated when the annotation is about to be displayed on
+the screen. \fIScript\fR must create a window for the annotation and return
+the name of that window as its result. Two substitutions will be performed in
+\fIscript\fR before evaluation. \fI%W\fR will be substituted by the name of
+the parent text widget, and \fI%%\fR will be substituted by a single \fI%\fR.
+If the annotation's window should ever be deleted, \fIscript\fR will be
+evaluated again the next time the annotation is displayed.
.TP
\fB\-padx \fIpixels\fR
-\fIPixels\fR specifies the amount of extra space to leave on
-each side of the embedded window.
-It may have any of the usual forms defined for a screen distance.
+.
+\fIPixels\fR specifies the amount of extra space to leave on each side of the
+embedded window. It may have any of the usual forms defined for a screen
+distance.
.TP
\fB\-pady \fIpixels\fR
-\fIPixels\fR specifies the amount of extra space to leave on
-the top and on the bottom of the embedded window.
-It may have any of the usual forms defined for a screen distance.
+.
+\fIPixels\fR specifies the amount of extra space to leave on the top and on
+the bottom of the embedded window. It may have any of the usual forms defined
+for a screen distance.
.TP
\fB\-stretch \fIboolean\fR
-If the requested height of the embedded window is less than the
-height of the line in which it is displayed, this option can be
-used to specify whether the window should be stretched vertically
-to fill its line.
-If the \fB\-pady\fR option has been specified as well, then the
-requested padding will be retained even if the window is
-stretched.
+.
+If the requested height of the embedded window is less than the height of the
+line in which it is displayed, this option can be used to specify whether the
+window should be stretched vertically to fill its line. If the \fB\-pady\fR
+option has been specified as well, then the requested padding will be retained
+even if the window is stretched.
.TP
\fB\-window \fIpathName\fR
-Specifies the name of a window to display in the annotation.
-.VS 8.5
-Note that if a \fIpathName\fR has been set, then later configuring a
-window to the empty string will not delete the widget corresponding to
-the old \fIpathName\fR. Rather it will remove the association between
-the old \fIpathName\fR and the text widget. If multiple peer widgets
-are in use, it is usually simpler to use the \fB\-create\fR option if
-embedded windows are desired in each peer.
-.VE 8.5
+.
+Specifies the name of a window to display in the annotation. Note that if a
+\fIpathName\fR has been set, then later configuring a window to the empty
+string will not delete the widget corresponding to the old \fIpathName\fR.
+Rather it will remove the association between the old \fIpathName\fR and the
+text widget. If multiple peer widgets are in use, it is usually simpler to use
+the \fB\-create\fR option if embedded windows are desired in each peer.
.SH "EMBEDDED IMAGES"
.PP
-The final form of annotation in text widgets is an embedded image.
-Each embedded image annotation causes an image to be displayed
-at a particular point in the text.
-There may be any number of embedded images in a text widget,
-and a particular image may be embedded in multiple places in the same
-text widget.
-The embedded image's position on the screen will be updated as the
-text is modified or scrolled.
-Each embedded image occupies one
-.VS 8.5
-unit's
-.VE 8.5
-worth of index space
-in the text widget, and it may be referred to either by
-its position in the widget's index space, or the name it is assigned
-when the image is inserted into the text widget with \fIpathName \fBimage create\fR.
-If the range of text containing the embedded image is deleted then
-that copy of the image is removed from the screen.
+The final form of annotation in text widgets is an embedded image. Each
+embedded image annotation causes an image to be displayed at a particular
+point in the text. There may be any number of embedded images in a text
+widget, and a particular image may be embedded in multiple places in the same
+text widget. The embedded image's position on the screen will be updated as
+the text is modified or scrolled. Each embedded image occupies one unit's
+worth of index space in the text widget, and it may be referred to either by
+its position in the widget's index space, or the name it is assigned when the
+image is inserted into the text widget with \fIpathName \fBimage create\fR. If
+the range of text containing the embedded image is deleted then that copy of
+the image is removed from the screen.
.PP
When an embedded image is added to a text widget with the \fIpathName \fBimage
-create\fR widget command, a name unique to this instance of the image
-is returned. This name may then be used to refer to this image
-instance. The name is taken to be the value of the \fB\-name\fR option
-(described below). If the \fB\-name\fR option is not provided, the
-\fB\-image\fR name is used instead. If the \fIimageName\fR is already
-in use in the text widget, then \fB#\fInn\fR is added to the end of the
-\fIimageName\fR, where \fInn\fR is an arbitrary integer. This insures
-the \fIimageName\fR is unique.
-Once this name is assigned to this instance of the image, it does not
-change, even though the \fB\-image\fR or \fB\-name\fR values can be changed
-with \fIpathName \fBimage configure\fR.
+create\fR widget command, a name unique to this instance of the image is
+returned. This name may then be used to refer to this image instance. The name
+is taken to be the value of the \fB\-name\fR option (described below). If the
+\fB\-name\fR option is not provided, the \fB\-image\fR name is used instead.
+If the \fIimageName\fR is already in use in the text widget, then \fB#\fInn\fR
+is added to the end of the \fIimageName\fR, where \fInn\fR is an arbitrary
+integer. This insures the \fIimageName\fR is unique. Once this name is
+assigned to this instance of the image, it does not change, even though the
+\fB\-image\fR or \fB\-name\fR values can be changed with \fIpathName \fBimage
+configure\fR.
.PP
-When an embedded image is added to a text widget with the
-\fIpathName \fBimage create\fR widget command, several configuration
-options may be associated with it.
-These options may be modified later with the \fIpathName \fBimage configure\fR
-widget command.
-The following options are currently supported:
+When an embedded image is added to a text widget with the \fIpathName \fBimage
+create\fR widget command, several configuration options may be associated with
+it. These options may be modified later with the \fIpathName \fBimage
+configure\fR widget command. The following options are currently supported:
.TP
\fB\-align \fIwhere\fR
-If the image is not as tall as the line in which it is displayed,
-this option determines where the image is displayed in the line.
-\fIWhere\fR must have one of the values \fBtop\fR (align the top of the image
-with the top of the line), \fBcenter\fR (center the image
-within the range of the line), \fBbottom\fR (align the bottom of the
-image with the bottom of the line's area),
-or \fBbaseline\fR (align the bottom of the image with the baseline
-of the line).
+.
+If the image is not as tall as the line in which it is displayed, this option
+determines where the image is displayed in the line. \fIWhere\fR must have one
+of the values \fBtop\fR (align the top of the image with the top of the line),
+\fBcenter\fR (center the image within the range of the line), \fBbottom\fR
+(align the bottom of the image with the bottom of the line's area), or
+\fBbaseline\fR (align the bottom of the image with the baseline of the line).
.TP
\fB\-image \fIimage\fR
-Specifies the name of the Tk image to display in the annotation.
-If \fIimage\fR is not a valid Tk image, then an error is returned.
+.
+Specifies the name of the Tk image to display in the annotation. If
+\fIimage\fR is not a valid Tk image, then an error is returned.
.TP
\fB\-name \fIImageName\fR
-Specifies the name by which this image instance may be referenced in
-the text widget. If \fIImageName\fR is not supplied, then the
-name of the Tk image is used instead.
-If the \fIimageName\fR is already in use, \fI#nn\fR is appended to
-the end of the name as described above.
+.
+Specifies the name by which this image instance may be referenced in the text
+widget. If \fIImageName\fR is not supplied, then the name of the Tk image is
+used instead. If the \fIimageName\fR is already in use, \fI#nn\fR is appended
+to the end of the name as described above.
.TP
\fB\-padx \fIpixels\fR
-\fIPixels\fR specifies the amount of extra space to leave on
-each side of the embedded image.
-It may have any of the usual forms defined for a screen distance.
+.
+\fIPixels\fR specifies the amount of extra space to leave on each side of the
+embedded image. It may have any of the usual forms defined for a screen
+distance.
.TP
\fB\-pady \fIpixels\fR
-\fIPixels\fR specifies the amount of extra space to leave on
-the top and on the bottom of the embedded image.
-It may have any of the usual forms defined for a screen distance.
+.
+\fIPixels\fR specifies the amount of extra space to leave on the top and on
+the bottom of the embedded image. It may have any of the usual forms defined
+for a screen distance.
.SH "THE SELECTION"
.PP
-Selection support is implemented via tags.
-If the \fBexportSelection\fR option for the text widget is true
-then the \fBsel\fR tag will be associated with the selection:
+Selection support is implemented via tags. If the \fBexportSelection\fR option
+for the text widget is true then the \fBsel\fR tag will be associated with the
+selection:
.IP [1]
-Whenever characters are tagged with \fBsel\fR the text widget
-will claim ownership of the selection.
+Whenever characters are tagged with \fBsel\fR the text widget will claim
+ownership of the selection.
.IP [2]
-Attempts to retrieve the
-selection will be serviced by the text widget, returning all the
-characters with the \fBsel\fR tag.
+Attempts to retrieve the selection will be serviced by the text widget,
+returning all the characters with the \fBsel\fR tag.
.IP [3]
-If the selection is claimed away by another application or by another
-window within this application, then the \fBsel\fR tag will be removed
-from all characters in the text.
+If the selection is claimed away by another application or by another window
+within this application, then the \fBsel\fR tag will be removed from all
+characters in the text.
.IP [4]
-Whenever the \fBsel\fR tag range changes a virtual event
-\fB<<Selection>>\fR is generated.
+Whenever the \fBsel\fR tag range changes a virtual event \fB<<Selection>>\fR
+is generated.
.PP
-The \fBsel\fR tag is automatically defined when a text widget is
-created, and it may not be deleted with the
+The \fBsel\fR tag is automatically defined when a text widget is created, and
+it may not be deleted with the
.QW "\fIpathName \fBtag delete\fR"
-widget command. Furthermore, the \fBselectBackground\fR,
-\fBselectBorderWidth\fR, and \fBselectForeground\fR options for
-the text widget are tied to the \fB\-background\fR,
-\fB\-borderwidth\fR, and \fB\-foreground\fR options for the \fBsel\fR
-tag: changes in either will automatically be reflected in the
-other.
-.VS 8.5
-Also the
-\fB\-inactiveselectbackground\fR option for the text widget is used
-instead of \fB\-selectbackground\fR when the text widget does not have
-the focus. This allows programmatic control over the visualization of
-the \fBsel\fR tag for foreground and background windows, or to have
-\fBsel\fR not shown at all (when \fB\-inactiveselectbackground\fR is
-empty) for background windows. Each peer text widget has its own
-\fBsel\fR tag which can be separately configured and set.
-.VE 8.5
+widget command. Furthermore, the \fBselectBackground\fR,
+\fBselectBorderWidth\fR, and \fBselectForeground\fR options for the text
+widget are tied to the \fB\-background\fR, \fB\-borderwidth\fR, and
+\fB\-foreground\fR options for the \fBsel\fR tag: changes in either will
+automatically be reflected in the other. Also the
+\fB\-inactiveselectbackground\fR option for the text widget is used instead of
+\fB\-selectbackground\fR when the text widget does not have the focus. This
+allows programmatic control over the visualization of the \fBsel\fR tag for
+foreground and background windows, or to have \fBsel\fR not shown at all (when
+\fB\-inactiveselectbackground\fR is empty) for background windows. Each peer
+text widget has its own \fBsel\fR tag which can be separately configured and
+set.
.SH "THE INSERTION CURSOR"
.PP
-The mark named \fBinsert\fR has special significance in text widgets.
-It is defined automatically when a text widget is created and it
-may not be unset with the
+The mark named \fBinsert\fR has special significance in text widgets. It is
+defined automatically when a text widget is created and it may not be unset
+with the
.QW "\fIpathName \fBmark unset\fR"
-widget command.
-The \fBinsert\fR mark represents the position of the insertion
-cursor, and the insertion cursor will automatically be drawn at
-this point whenever the text widget has the input focus.
+widget command. The \fBinsert\fR mark represents the position of the insertion
+cursor, and the insertion cursor will automatically be drawn at this point
+whenever the text widget has the input focus.
.SH "THE MODIFIED FLAG"
-The text widget can keep track of changes to the content of the widget
-by means of the modified flag. Inserting or deleting text will set
-this flag. The flag can be queried, set and cleared programmatically
-as well. Whenever the flag changes state a \fB<<Modified>>\fR virtual
-event is generated. See the \fIpathName \fBedit modified\fR widget command for
-more details.
+.PP
+The text widget can keep track of changes to the content of the widget by
+means of the modified flag. Inserting or deleting text will set this flag. The
+flag can be queried, set and cleared programmatically as well. Whenever the
+flag changes state a \fB<<Modified>>\fR virtual event is generated. See the
+\fIpathName \fBedit modified\fR widget command for more details.
.SH "THE UNDO MECHANISM"
.PP
The text widget has an unlimited undo and redo mechanism (when the
-\fB\-undo\fR widget option is true) which records every insert and
-delete action on a stack.
+\fB\-undo\fR widget option is true) which records every insert and delete
+action on a stack.
.PP
Boundaries (called
.QW separators )
-are inserted between edit actions. The
-purpose of these separators is to group inserts, deletes and replaces
-into one compound edit action. When undoing a change everything between
-two separators will be undone. The undone changes are then moved to the
-redo stack, so that an undone edit can be redone again. The redo stack
-is cleared whenever new edit actions are recorded on the undo stack. The
-undo and redo stacks can be cleared to keep their depth under control.
+are inserted between edit actions. The purpose of these separators is to group
+inserts, deletes and replaces into one compound edit action. When undoing a
+change everything between two separators will be undone. The undone changes
+are then moved to the redo stack, so that an undone edit can be redone again.
+The redo stack is cleared whenever new edit actions are recorded on the undo
+stack. The undo and redo stacks can be cleared to keep their depth under
+control.
.PP
-Separators are inserted automatically when the \fB\-autoseparators\fR
-widget option is true. You can insert separators programmatically as
-well. If a separator is already present at the top of the undo stack
-no other will be inserted. That means that two separators on the undo
-stack are always separated by at least one insert or delete action.
+Separators are inserted automatically when the \fB\-autoseparators\fR widget
+option is true. You can insert separators programmatically as well. If a
+separator is already present at the top of the undo stack no other will be
+inserted. That means that two separators on the undo stack are always
+separated by at least one insert or delete action.
.PP
-The undo mechanism is also linked to the modified flag. This means
-that undoing or redoing changes can take a modified text widget back
-to the unmodified state or vice versa. The modified flag will be set
-automatically to the appropriate state. This automatic coupling
-does not work when the modified flag has been set by the user, until
-the flag has been reset again.
+The undo mechanism is also linked to the modified flag. This means that
+undoing or redoing changes can take a modified text widget back to the
+unmodified state or vice versa. The modified flag will be set automatically to
+the appropriate state. This automatic coupling does not work when the modified
+flag has been set by the user, until the flag has been reset again.
.PP
See below for the \fIpathName \fBedit\fR widget command that controls the undo
mechanism.
.SH "PEER WIDGETS"
.PP
-.VS 8.5
-The text widget has a separate store of all its data concerning each
-line's textual contents, marks, tags, images and windows, and the undo
-stack.
+The text widget has a separate store of all its data concerning each line's
+textual contents, marks, tags, images and windows, and the undo stack.
.PP
-While this data store cannot be accessed directly (i.e. without a text
-widget as an intermediary), multiple text widgets can be created, each
-of which present different views on the same underlying data. Such
-text widgets are known as peer text widgets.
+While this data store cannot be accessed directly (i.e. without a text widget
+as an intermediary), multiple text widgets can be created, each of which
+present different views on the same underlying data. Such text widgets are
+known as peer text widgets.
.PP
As text is added, deleted, edited and coloured in any one widget, and as
-images, marks, tags are adjusted, all such changes will be reflected in
-all peers.
+images, marks, tags are adjusted, all such changes will be reflected in all
+peers.
.PP
-All data and markup is shared, except for a few small details. First,
-the \fBsel\fR tag may be set and configured (in its display style)
-differently for each peer. Second, each peer has its own \fBinsert\fR
-and \fBcurrent\fR mark positions (but all other marks are shared).
-Third, embedded windows, which are arbitrary other widgets, cannot be
-shared between peers. This means the \fB\-window\fR option of embedded
-windows is independently set for each peer (it is advisable to use
-the \fB\-create\fR script capabilities to allow each peer to create its
-own embedded windows as needed). Fourth, all of the configuration
-options of each peer (e.g. \fB\-font\fR, etc) can be set independently,
-with the exception of \fB\-undo\fR, \fB\-maxUndo\fR, \fB\-autoSeparators\fR
-(i.e. all undo, redo and modified state issues are shared).
+All data and markup is shared, except for a few small details. First, the
+\fBsel\fR tag may be set and configured (in its display style) differently for
+each peer. Second, each peer has its own \fBinsert\fR and \fBcurrent\fR mark
+positions (but all other marks are shared). Third, embedded windows, which are
+arbitrary other widgets, cannot be shared between peers. This means the
+\fB\-window\fR option of embedded windows is independently set for each peer
+(it is advisable to use the \fB\-create\fR script capabilities to allow each
+peer to create its own embedded windows as needed). Fourth, all of the
+configuration options of each peer (e.g. \fB\-font\fR, etc) can be set
+independently, with the exception of \fB\-undo\fR, \fB\-maxUndo\fR,
+\fB\-autoSeparators\fR (i.e. all undo, redo and modified state issues are
+shared).
.PP
-Finally any single peer need not contain all lines from the underlying
-data store. When creating a peer, a contiguous range of lines (e.g.
-only lines 52 through 125) may be specified. This allows a peer to
-contain just a small portion of the overall text. The range of lines
-will expand and contract as text is inserted or deleted. The peer will
-only ever display complete lines of text (one cannot share just part of
-a line). If the peer's contents contracts to nothing (i.e. all complete
-lines in the peer widget have been deleted from another widget), then it
-is impossible for new lines to be inserted. The peer will simply become
-an empty shell on which the background can be configured, but which will
-never show any content (without manual reconfiguration of the start and
-end lines). Note that a peer which does not contain all of the
+Finally any single peer need not contain all lines from the underlying data
+store. When creating a peer, a contiguous range of lines (e.g. only lines 52
+through 125) may be specified. This allows a peer to contain just a small
+portion of the overall text. The range of lines will expand and contract as
+text is inserted or deleted. The peer will only ever display complete lines of
+text (one cannot share just part of a line). If the peer's contents contracts
+to nothing (i.e. all complete lines in the peer widget have been deleted from
+another widget), then it is impossible for new lines to be inserted. The peer
+will simply become an empty shell on which the background can be configured,
+but which will never show any content (without manual reconfiguration of the
+start and end lines). Note that a peer which does not contain all of the
underlying data store still has indices numbered from
.QW 1.0
to
.QW end .
-It is simply that those indices reflect a subset of the total data, and
-data outside the contained range is not accessible to the peer. This
-means that the command \fIpeerName \fBindex end\fR may return quite different
-values in different peers. Similarly, commands like \fIpeerName \fBtag
-ranges\fR will not return index ranges outside that which is meaningful
-to the peer. The configuration options \fB\-startline\fR and
-\fB\-endline\fR may be used to control how much of the underlying data is
-contained in any given text widget.
+It is simply that those indices reflect a subset of the total data, and data
+outside the contained range is not accessible to the peer. This means that the
+command \fIpeerName \fBindex end\fR may return quite different values in
+different peers. Similarly, commands like \fIpeerName \fBtag ranges\fR will
+not return index ranges outside that which is meaningful to the peer. The
+configuration options \fB\-startline\fR and \fB\-endline\fR may be used to
+control how much of the underlying data is contained in any given text widget.
.PP
-Note that peers are really peers. Deleting the
+Note that peers are really peers. Deleting the
.QW original
text widget will not cause any other peers to be deleted, or otherwise
affected.
.PP
See below for the \fIpathName \fBpeer\fR widget command that controls the
creation of peer widgets.
-.VE 8.5
.SH "WIDGET COMMAND"
.PP
-The \fBtext\fR command creates a new Tcl command whose
-name is the same as the path name of the text's window. This
-command may be used to invoke various
-operations on the widget. It has the following general form:
+The \fBtext\fR command creates a new Tcl command whose name is the same as the
+path name of the text's window. This command may be used to invoke various
+operations on the widget. It has the following general form:
.CS
\fIpathName option \fR?\fIarg arg ...\fR?
.CE
-\fIPathName\fR is the name of the command, which is the same as
-the text widget's path name. \fIOption\fR and the \fIarg\fRs
-determine the exact behavior of the command. The following
-commands are possible for text widgets:
+\fIPathName\fR is the name of the command, which is the same as the text
+widget's path name. \fIOption\fR and the \fIarg\fRs determine the exact
+behavior of the command. The following commands are possible for text widgets:
.TP
\fIpathName \fBbbox \fIindex\fR
-Returns a list of four elements describing the screen area
-of the character given by \fIindex\fR.
-The first two elements of the list give the x and y coordinates
-of the upper-left corner of the area occupied by the
-character, and the last two elements give the width and height
-of the area.
-If the character is only partially visible on the screen, then
-the return value reflects just the visible part.
-If the character is not visible on the screen then the return
-value is an empty list.
+.
+Returns a list of four elements describing the screen area of the character
+given by \fIindex\fR. The first two elements of the list give the x and y
+coordinates of the upper-left corner of the area occupied by the character,
+and the last two elements give the width and height of the area. If the
+character is only partially visible on the screen, then the return value
+reflects just the visible part. If the character is not visible on the screen
+then the return value is an empty list.
.TP
\fIpathName \fBcget\fR \fIoption\fR
-Returns the current value of the configuration option given
-by \fIoption\fR.
-\fIOption\fR may have any of the values accepted by the \fBtext\fR
-command.
+.
+Returns the current value of the configuration option given by \fIoption\fR.
+\fIOption\fR may have any of the values accepted by the \fBtext\fR command.
.TP
\fIpathName \fBcompare\fR \fIindex1 op index2\fR
-Compares the indices given by \fIindex1\fR and \fIindex2\fR according
-to the relational operator given by \fIop\fR, and returns 1 if
-the relationship is satisfied and 0 if it is not.
-\fIOp\fR must be one of the operators <, <=, ==, >=, >, or !=.
-If \fIop\fR is == then 1 is returned if the two indices refer to
-the same character, if \fIop\fR is < then 1 is returned if \fIindex1\fR
-refers to an earlier character in the text than \fIindex2\fR, and
-so on.
+.
+Compares the indices given by \fIindex1\fR and \fIindex2\fR according to the
+relational operator given by \fIop\fR, and returns 1 if the relationship is
+satisfied and 0 if it is not. \fIOp\fR must be one of the operators <, <=, ==,
+>=, >, or !=. If \fIop\fR is == then 1 is returned if the two indices refer to
+the same character, if \fIop\fR is < then 1 is returned if \fIindex1\fR refers
+to an earlier character in the text than \fIindex2\fR, and so on.
.TP
\fIpathName \fBconfigure\fR ?\fIoption\fR? \fI?value option value ...\fR?
-Query or modify the configuration options of the widget.
-If no \fIoption\fR is specified, returns a list describing all of
-the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
-information on the format of this list). If \fIoption\fR is specified
-with no \fIvalue\fR, then the command returns a list describing the
-one named option (this list will be identical to the corresponding
-sublist of the value returned if no \fIoption\fR is specified). If
-one or more \fIoption\-value\fR pairs are specified, then the command
-modifies the given widget option(s) to have the given value(s); in
-this case the command returns an empty string.
-\fIOption\fR may have any of the values accepted by the \fBtext\fR
-command.
-.VS 8.5
+.
+Query or modify the configuration options of the widget. If no \fIoption\fR is
+specified, returns a list describing all of the available options for
+\fIpathName\fR (see \fBTk_ConfigureInfo\fR for information on the format of
+this list). If \fIoption\fR is specified with no \fIvalue\fR, then the command
+returns a list describing the one named option (this list will be identical to
+the corresponding sublist of the value returned if no \fIoption\fR is
+specified). If one or more \fIoption\-value\fR pairs are specified, then the
+command modifies the given widget option(s) to have the given value(s); in
+this case the command returns an empty string. \fIOption\fR may have any of
+the values accepted by the \fBtext\fR command.
.TP
\fIpathName \fBcount\fR \fI?options\fR? \fIindex1 index2\fR
-Counts the number of relevant things between the two indices.
-If \fIindex1\fR is after \fIindex2\fR, the result will be a negative number
-(and this holds for each of the possible options).
-The actual items which are counted depend on the
-options given. The result is a list of integers, one for the result of
-each counting option given. Valid counting options are \fB\-chars\fR,
+.
+Counts the number of relevant things between the two indices. If \fIindex1\fR
+is after \fIindex2\fR, the result will be a negative number (and this holds
+for each of the possible options). The actual items which are counted depend
+on the options given. The result is a list of integers, one for the result of
+each counting option given. Valid counting options are \fB\-chars\fR,
\fB\-displaychars\fR, \fB\-displayindices\fR, \fB\-displaylines\fR,
\fB\-indices\fR, \fB\-lines\fR, \fB\-xpixels\fR and \fB\-ypixels\fR. The
default value, if no option is specified, is \fB\-indices\fR. There is an
-additional possible option \fB\-update\fR which is a modifier. If given,
-then all subsequent options ensure that any possible out of date
-information is recalculated. This currently only has any effect for the
-\fI\-ypixels\fR count (which, if \fB\-update\fR is not given, will use the text
-widget's current cached value for each line). The count options are
-interpreted as follows:
+additional possible option \fB\-update\fR which is a modifier. If given, then
+all subsequent options ensure that any possible out of date information is
+recalculated. This currently only has any effect for the \fI\-ypixels\fR count
+(which, if \fB\-update\fR is not given, will use the text widget's current
+cached value for each line). The count options are interpreted as follows:
.RS
.IP \fB\-chars\fR
-count all characters, whether elided or not. Do not count
-embedded windows or images.
+count all characters, whether elided or not. Do not count embedded windows or
+images.
.IP \fB\-displaychars\fR
count all non-elided characters.
.IP \fB\-displayindices\fR
count all non-elided characters, windows and images.
.IP \fB\-displaylines\fR
-count all display lines (i.e. counting one for each
-time a line wraps) from the line of the first index up to, but not
-including the display line of the second index. Therefore if they are
-both on the same display line, zero will be returned. By definition
-displaylines are visible and therefore this only counts portions of
-actual visible lines.
+count all display lines (i.e. counting one for each time a line wraps) from
+the line of the first index up to, but not including the display line of the
+second index. Therefore if they are both on the same display line, zero will
+be returned. By definition displaylines are visible and therefore this only
+counts portions of actual visible lines.
.IP \fB\-indices\fR
-count all characters and embedded windows or images (i.e.
-everything which counts in text-widget index space), whether they are
-elided or not.
+count all characters and embedded windows or images (i.e. everything which
+counts in text-widget index space), whether they are elided or not.
.IP \fB\-lines\fR
-count all logical lines (irrespective of wrapping) from
-the line of the first index up to, but not including the line of the
-second index. Therefore if they are both on the same line, zero will be
-returned. Logical lines are counted whether they are currently visible
-(non-elided) or not.
+count all logical lines (irrespective of wrapping) from the line of the first
+index up to, but not including the line of the second index. Therefore if they
+are both on the same line, zero will be returned. Logical lines are counted
+whether they are currently visible (non-elided) or not.
.IP \fB\-xpixels\fR
-count the number of horizontal pixels from the first
-pixel of the first index to (but not including) the first pixel of the
-second index. To count the total desired width of the text widget
-(assuming wrapping is not enabled), first find the longest line and then
-use
+count the number of horizontal pixels from the first pixel of the first index
+to (but not including) the first pixel of the second index. To count the total
+desired width of the text widget (assuming wrapping is not enabled), first
+find the longest line and then use
.QW ".text count \-xpixels \N'34'${line}.0\N'34' \N'34'${line}.0 lineend\N'34'" .
.IP \fB\-ypixels\fR
-count the number of vertical pixels from the first pixel
-of the first index to (but not including) the first pixel of the second
-index. If both indices are on the same display line, zero will be
-returned. To count the total number of vertical pixels in the text
-widget, use
+count the number of vertical pixels from the first pixel of the first index to
+(but not including) the first pixel of the second index. If both indices are
+on the same display line, zero will be returned. To count the total number of
+vertical pixels in the text widget, use
.QW ".text count \-ypixels 1.0 end" ,
and to ensure this is up to date, use
.QW ".text count \-update \-ypixels 1.0 end" .
.PP
-The command returns a positive or negative integer corresponding to the
-number of items counted between the two indices. One such integer is
-returned for each counting option given, so a list is returned if more
-than one option was supplied. For example
+The command returns a positive or negative integer corresponding to the number
+of items counted between the two indices. One such integer is returned for
+each counting option given, so a list is returned if more than one option was
+supplied. For example
.QW ".text count \-xpixels \-ypixels 1.3 4.5"
is perfectly valid and will return a list of two elements.
.RE
-.VE 8.5
.TP
\fIpathName \fBdebug \fR?\fIboolean\fR?
-If \fIboolean\fR is specified, then it must have one of the true or
-false values accepted by Tcl_GetBoolean.
-If the value is a true one then internal consistency checks will be
-turned on in the B-tree code associated with text widgets.
-If \fIboolean\fR has a false value then the debugging checks will
-be turned off.
-In either case the command returns an empty string.
-If \fIboolean\fR is not specified then the command returns \fBon\fR
-or \fBoff\fR to indicate whether or not debugging is turned on.
-There is a single debugging switch shared by all text widgets: turning
-debugging on or off in any widget turns it on or off for all widgets.
-For widgets with large amounts of text, the consistency checks may
-cause a noticeable slow-down.
+.
+If \fIboolean\fR is specified, then it must have one of the true or false
+values accepted by Tcl_GetBoolean. If the value is a true one then internal
+consistency checks will be turned on in the B-tree code associated with text
+widgets. If \fIboolean\fR has a false value then the debugging checks will be
+turned off. In either case the command returns an empty string. If
+\fIboolean\fR is not specified then the command returns \fBon\fR or \fBoff\fR
+to indicate whether or not debugging is turned on. There is a single debugging
+switch shared by all text widgets: turning debugging on or off in any widget
+turns it on or off for all widgets. For widgets with large amounts of text,
+the consistency checks may cause a noticeable slow-down.
.RS
.PP
-When debugging is turned on, the drawing routines of the text widget
-set the global variables \fBtk_textRedraw\fR and \fBtk_textRelayout\fR
-to the lists of indices that are redrawn. The values of these variables
-are tested by Tk's test suite.
+When debugging is turned on, the drawing routines of the text widget set the
+global variables \fBtk_textRedraw\fR and \fBtk_textRelayout\fR to the lists of
+indices that are redrawn. The values of these variables are tested by Tk's
+test suite.
.RE
.TP
\fIpathName \fBdelete \fIindex1 \fR?\fIindex2 ...\fR?
-Delete a range of characters from the text.
-If both \fIindex1\fR and \fIindex2\fR are specified, then delete
-all the characters starting with the one given by \fIindex1\fR
-and stopping just before \fIindex2\fR (i.e. the character at
-\fIindex2\fR is not deleted).
-If \fIindex2\fR does not specify a position later in the text
-than \fIindex1\fR then no characters are deleted.
-If \fIindex2\fR is not specified then the single character at
-\fIindex1\fR is deleted.
-It is not allowable to delete characters in a way that would leave
-the text without a newline as the last character.
-The command returns an empty string.
-If more indices are given, multiple ranges of text will be deleted.
-All indices are first checked for validity before any deletions are made.
-They are sorted and the text is removed from the last range to the
-first range to deleted text does not cause an undesired index shifting
-side-effects. If multiple ranges with the same start index are given,
-then the longest range is used. If overlapping ranges are given, then
-they will be merged into spans that do not cause deletion of text
-outside the given ranges due to text shifted during deletion.
+.
+Delete a range of characters from the text. If both \fIindex1\fR and
+\fIindex2\fR are specified, then delete all the characters starting with the
+one given by \fIindex1\fR and stopping just before \fIindex2\fR (i.e. the
+character at \fIindex2\fR is not deleted). If \fIindex2\fR does not specify a
+position later in the text than \fIindex1\fR then no characters are deleted.
+If \fIindex2\fR is not specified then the single character at \fIindex1\fR is
+deleted. It is not allowable to delete characters in a way that would leave
+the text without a newline as the last character. The command returns an empty
+string. If more indices are given, multiple ranges of text will be deleted.
+All indices are first checked for validity before any deletions are made. They
+are sorted and the text is removed from the last range to the first range to
+deleted text does not cause an undesired index shifting side-effects. If
+multiple ranges with the same start index are given, then the longest range is
+used. If overlapping ranges are given, then they will be merged into spans
+that do not cause deletion of text outside the given ranges due to text
+shifted during deletion.
.TP
\fIpathName \fBdlineinfo \fIindex\fR
-Returns a list with five elements describing the area occupied
-by the display line containing \fIindex\fR.
-The first two elements of the list give the x and y coordinates
-of the upper-left corner of the area occupied by the
-line, the third and fourth elements give the width and height
-of the area, and the fifth element gives the position of the baseline
-for the line, measured down from the top of the area.
-All of this information is measured in pixels.
-If the current wrap mode is \fBnone\fR and the line extends beyond
-the boundaries of the window,
-the area returned reflects the entire area of the line, including the
-portions that are out of the window.
-If the line is shorter than the full width of the window then the
-area returned reflects just the portion of the line that is occupied
-by characters and embedded windows.
-If the display line containing \fIindex\fR is not visible on
-the screen then the return value is an empty list.
+.
+Returns a list with five elements describing the area occupied by the display
+line containing \fIindex\fR. The first two elements of the list give the x and
+y coordinates of the upper-left corner of the area occupied by the line, the
+third and fourth elements give the width and height of the area, and the fifth
+element gives the position of the baseline for the line, measured down from
+the top of the area. All of this information is measured in pixels. If the
+current wrap mode is \fBnone\fR and the line extends beyond the boundaries of
+the window, the area returned reflects the entire area of the line, including
+the portions that are out of the window. If the line is shorter than the full
+width of the window then the area returned reflects just the portion of the
+line that is occupied by characters and embedded windows. If the display line
+containing \fIindex\fR is not visible on the screen then the return value is
+an empty list.
.TP
\fIpathName \fBdump \fR?\fIswitches\fR? \fIindex1 \fR?\fIindex2\fR?
-Return the contents of the text widget from \fIindex1\fR up to,
-but not including \fIindex2\fR,
-including the text and
-information about marks, tags, and embedded windows.
-If \fIindex2\fR is not specified, then it defaults to
-one character past \fIindex1\fR. The information is returned
-in the following format:
+.
+Return the contents of the text widget from \fIindex1\fR up to, but not
+including \fIindex2\fR, including the text and information about marks, tags,
+and embedded windows. If \fIindex2\fR is not specified, then it defaults to
+one character past \fIindex1\fR. The information is returned in the following
+format:
.LP
.RS
\fIkey1 value1 index1 key2 value2 index2\fR ...
.LP
-The possible \fIkey\fR values are \fBtext\fR, \fBmark\fR,
-\fBtagon\fR, \fBtagoff\fR, \fBimage\fR, and \fBwindow\fR. The corresponding
-\fIvalue\fR is the text, mark name, tag name, image name, or window name.
-The \fIindex\fR information is the index of the
-start of the text, mark, tag transition, image or window.
-One or more of the following switches (or abbreviations thereof)
+The possible \fIkey\fR values are \fBtext\fR, \fBmark\fR, \fBtagon\fR,
+\fBtagoff\fR, \fBimage\fR, and \fBwindow\fR. The corresponding \fIvalue\fR is
+the text, mark name, tag name, image name, or window name. The \fIindex\fR
+information is the index of the start of the text, mark, tag transition, image
+or window. One or more of the following switches (or abbreviations thereof)
may be specified to control the dump:
.TP
\fB\-all\fR
+.
Return information about all elements: text, marks, tags, images and windows.
This is the default.
.TP
\fB\-command \fIcommand\fR
+.
Instead of returning the information as the result of the dump operation,
invoke the \fIcommand\fR on each element of the text widget within the range.
-The command has three arguments appended to it before it is evaluated:
-the \fIkey\fR, \fIvalue\fR, and \fIindex\fR.
+The command has three arguments appended to it before it is evaluated: the
+\fIkey\fR, \fIvalue\fR, and \fIindex\fR.
.TP
\fB\-image\fR
+.
Include information about images in the dump results.
.TP
\fB\-mark\fR
+.
Include information about marks in the dump results.
.TP
\fB\-tag\fR
-Include information about tag transitions in the dump results. Tag
-information is returned as \fBtagon\fR and \fBtagoff\fR elements that
-indicate the begin and end of each range of each tag, respectively.
+.
+Include information about tag transitions in the dump results. Tag information
+is returned as \fBtagon\fR and \fBtagoff\fR elements that indicate the begin
+and end of each range of each tag, respectively.
.TP
\fB\-text\fR
-Include information about text in the dump results. The value is the
-text up to the next element or the end of range indicated by \fIindex2\fR.
-A text element does not span newlines. A multi-line block of text that
-contains no marks or tag transitions will still be dumped as a set
-of text segments that each end with a newline. The newline is part
-of the value.
+.
+Include information about text in the dump results. The value is the text up
+to the next element or the end of range indicated by \fIindex2\fR. A text
+element does not span newlines. A multi-line block of text that contains no
+marks or tag transitions will still be dumped as a set of text segments that
+each end with a newline. The newline is part of the value.
.TP
\fB\-window\fR
-Include information about embedded windows in the dump results.
-The value of a window is its Tk pathname, unless the window
-has not been created yet. (It must have a create script.)
-In this case an empty string is returned, and you must query the
-window by its index position to get more information.
+.
+Include information about embedded windows in the dump results. The value of a
+window is its Tk pathname, unless the window has not been created yet. (It
+must have a create script.) In this case an empty string is returned, and you
+must query the window by its index position to get more information.
.RE
.TP
\fIpathName \fBedit \fIoption \fR?\fIarg arg ...\fR?
-This command controls the undo mechanism and the modified flag. The
-exact behavior of the command depends on the \fIoption\fR argument
-that follows the \fBedit\fR argument. The following forms of the
-command are currently supported:
+.
+This command controls the undo mechanism and the modified flag. The exact
+behavior of the command depends on the \fIoption\fR argument that follows the
+\fBedit\fR argument. The following forms of the command are currently
+supported:
.RS
.TP
\fIpathName \fBedit modified ?\fIboolean\fR?
-If \fIboolean\fR is not specified, returns the modified flag of the
-widget. The insert, delete, edit undo and edit redo commands or the
-user can set or clear the modified flag. If \fIboolean\fR is
-specified, sets the modified flag of the widget to \fIboolean\fR.
+.
+If \fIboolean\fR is not specified, returns the modified flag of the widget.
+The insert, delete, edit undo and edit redo commands or the user can set or
+clear the modified flag. If \fIboolean\fR is specified, sets the modified flag
+of the widget to \fIboolean\fR.
.TP
\fIpathName \fBedit redo\fR
-When the \fB\-undo\fR option is true, reapplies the last undone edits
-provided no other edits were done since then. Generates an error when
-the redo stack is empty. Does nothing when the \fB\-undo\fR option is
-false.
+.
+When the \fB\-undo\fR option is true, reapplies the last undone edits provided
+no other edits were done since then. Generates an error when the redo stack is
+empty. Does nothing when the \fB\-undo\fR option is false.
.TP
\fIpathName \fBedit reset\fR
+.
Clears the undo and redo stacks.
.TP
\fIpathName \fBedit separator\fR
-Inserts a separator (boundary) on the undo stack. Does nothing when
-the \fB\-undo\fR option is false.
+.
+Inserts a separator (boundary) on the undo stack. Does nothing when the
+\fB\-undo\fR option is false.
.TP
\fIpathName \fBedit undo\fR
-Undoes the last edit action when the \fB\-undo\fR option is true. An
-edit action is defined as all the insert and delete commands that are
-recorded on the undo stack in between two separators. Generates an
-error when the undo stack is empty. Does nothing when the \fB\-undo\fR
-option is false.
+.
+Undoes the last edit action when the \fB\-undo\fR option is true. An edit
+action is defined as all the insert and delete commands that are recorded on
+the undo stack in between two separators. Generates an error when the undo
+stack is empty. Does nothing when the \fB\-undo\fR option is false.
.RE
.TP
\fIpathName \fBget\fR \fI?\-displaychars?\fR \fI\-\- index1\fR ?\fIindex2 ...\fR?
-Return a range of characters from the text.
-The return value will be all the characters in the text starting
-with the one whose index is \fIindex1\fR and ending just before
-the one whose index is \fIindex2\fR (the character at \fIindex2\fR
-will not be returned).
-If \fIindex2\fR is omitted then the single character at \fIindex1\fR
-is returned.
-If there are no characters in the specified range (e.g. \fIindex1\fR
-is past the end of the file or \fIindex2\fR is less than or equal
-to \fIindex1\fR) then an empty string is returned.
-If the specified range contains embedded windows, no information
-about them is included in the returned string.
-If multiple index pairs are given, multiple ranges of text will be returned
-in a list. Invalid ranges will not be represented with empty strings in
-the list. The ranges are returned in the order passed to \fIpathName \fBget\fR.
-.VS 8.5
-If the \fB\-displaychars\fR option is given, then, within each range,
-only those characters which are not elided will be returned. This may
-have the effect that some of the returned ranges are empty strings.
-.VE 8.5
+.
+Return a range of characters from the text. The return value will be all the
+characters in the text starting with the one whose index is \fIindex1\fR and
+ending just before the one whose index is \fIindex2\fR (the character at
+\fIindex2\fR will not be returned). If \fIindex2\fR is omitted then the single
+character at \fIindex1\fR is returned. If there are no characters in the
+specified range (e.g. \fIindex1\fR is past the end of the file or \fIindex2\fR
+is less than or equal to \fIindex1\fR) then an empty string is returned. If
+the specified range contains embedded windows, no information about them is
+included in the returned string. If multiple index pairs are given, multiple
+ranges of text will be returned in a list. Invalid ranges will not be
+represented with empty strings in the list. The ranges are returned in the
+order passed to \fIpathName \fBget\fR. If the \fB\-displaychars\fR option is
+given, then, within each range, only those characters which are not elided
+will be returned. This may have the effect that some of the returned ranges
+are empty strings.
.TP
\fIpathName \fBimage \fIoption \fR?\fIarg arg ...\fR?
-This command is used to manipulate embedded images.
-The behavior of the command depends on the \fIoption\fR argument
-that follows the \fBtag\fR argument.
-The following forms of the command are currently supported:
+.
+This command is used to manipulate embedded images. The behavior of the
+command depends on the \fIoption\fR argument that follows the \fBtag\fR
+argument. The following forms of the command are currently supported:
.RS
.TP
\fIpathName \fBimage cget\fR \fIindex option\fR
-Returns the value of a configuration option for an embedded image.
-\fIIndex\fR identifies the embedded image, and \fIoption\fR
-specifies a particular configuration option, which must be one of
-the ones listed in the section \fBEMBEDDED IMAGES\fR.
+.
+Returns the value of a configuration option for an embedded image. \fIIndex\fR
+identifies the embedded image, and \fIoption\fR specifies a particular
+configuration option, which must be one of the ones listed in the section
+\fBEMBEDDED IMAGES\fR.
.TP
\fIpathName \fBimage configure \fIindex\fR ?\fIoption value ...\fR?
-Query or modify the configuration options for an embedded image.
-If no \fIoption\fR is specified, returns a list describing all of
-the available options for the embedded image at \fIindex\fR
-(see \fBTk_ConfigureInfo\fR for information on the format of this list).
-If \fIoption\fR is specified with no \fIvalue\fR, then the command
-returns a list describing the one named option (this list will be
-identical to the corresponding sublist of the value returned if no
-\fIoption\fR is specified).
-If one or more \fIoption\-value\fR pairs are specified, then the command
-modifies the given option(s) to have the given value(s); in
-this case the command returns an empty string.
-See \fBEMBEDDED IMAGES\fR for information on the options that
-are supported.
+.
+Query or modify the configuration options for an embedded image. If no
+\fIoption\fR is specified, returns a list describing all of the available
+options for the embedded image at \fIindex\fR (see \fBTk_ConfigureInfo\fR for
+information on the format of this list). If \fIoption\fR is specified with no
+\fIvalue\fR, then the command returns a list describing the one named option
+(this list will be identical to the corresponding sublist of the value
+returned if no \fIoption\fR is specified). If one or more \fIoption\-value\fR
+pairs are specified, then the command modifies the given option(s) to have the
+given value(s); in this case the command returns an empty string. See
+\fBEMBEDDED IMAGES\fR for information on the options that are supported.
.TP
\fIpathName \fBimage create \fIindex\fR ?\fIoption value ...\fR?
-This command creates a new image annotation, which will appear
-in the text at the position given by \fIindex\fR.
-Any number of \fIoption\-value\fR pairs may be specified to
-configure the annotation.
-Returns a unique identifier that may be used as an index to refer to
-this image.
-See \fBEMBEDDED IMAGES\fR for information on the options that
-are supported, and a description of the identifier returned.
+.
+This command creates a new image annotation, which will appear in the text at
+the position given by \fIindex\fR. Any number of \fIoption\-value\fR pairs may
+be specified to configure the annotation. Returns a unique identifier that may
+be used as an index to refer to this image. See \fBEMBEDDED IMAGES\fR for
+information on the options that are supported, and a description of the
+identifier returned.
.TP
\fIpathName \fBimage names\fR
+.
Returns a list whose elements are the names of all image instances currently
embedded in \fIwindow\fR.
.RE
.TP
\fIpathName \fBindex \fIindex\fR
-Returns the position corresponding to \fIindex\fR in the form
-\fIline.char\fR where \fIline\fR is the line number and \fIchar\fR
-is the character number.
+.
+Returns the position corresponding to \fIindex\fR in the form \fIline.char\fR
+where \fIline\fR is the line number and \fIchar\fR is the character number.
\fIIndex\fR may have any of the forms described under \fBINDICES\fR above.
.TP
\fIpathName \fBinsert \fIindex chars \fR?\fItagList chars tagList ...\fR?
+.
Inserts all of the \fIchars\fR arguments just before the character at
-\fIindex\fR.
-If \fIindex\fR refers to the end of the text (the character after
-the last newline) then the new text is inserted just before the
-last newline instead.
-If there is a single \fIchars\fR argument and no \fItagList\fR, then
-the new text will receive any tags that are present on both the
-character before and the character after the insertion point; if a tag
-is present on only one of these characters then it will not be
-applied to the new text.
-If \fItagList\fR is specified then it consists of a list of
-tag names; the new characters will receive all of the tags in
-this list and no others, regardless of the tags present around
-the insertion point.
-If multiple \fIchars\fR\-\fItagList\fR argument pairs are present,
-they produce the same effect as if a separate \fIpathName \fBinsert\fR widget
-command had been issued for each pair, in order.
-The last \fItagList\fR argument may be omitted.
+\fIindex\fR. If \fIindex\fR refers to the end of the text (the character after
+the last newline) then the new text is inserted just before the last newline
+instead. If there is a single \fIchars\fR argument and no \fItagList\fR, then
+the new text will receive any tags that are present on both the character
+before and the character after the insertion point; if a tag is present on
+only one of these characters then it will not be applied to the new text. If
+\fItagList\fR is specified then it consists of a list of tag names; the new
+characters will receive all of the tags in this list and no others, regardless
+of the tags present around the insertion point. If multiple
+\fIchars\fR\-\fItagList\fR argument pairs are present, they produce the same
+effect as if a separate \fIpathName \fBinsert\fR widget command had been
+issued for each pair, in order. The last \fItagList\fR argument may be
+omitted.
.TP
\fIpathName \fBmark \fIoption \fR?\fIarg arg ...\fR?
-This command is used to manipulate marks. The exact behavior of
-the command depends on the \fIoption\fR argument that follows
-the \fBmark\fR argument. The following forms of the command
-are currently supported:
+.
+This command is used to manipulate marks. The exact behavior of the command
+depends on the \fIoption\fR argument that follows the \fBmark\fR argument. The
+following forms of the command are currently supported:
.RS
.TP
\fIpathName \fBmark gravity \fImarkName\fR ?\fIdirection\fR?
-If \fIdirection\fR is not specified, returns \fBleft\fR or \fBright\fR
-to indicate which of its adjacent characters \fImarkName\fR is attached
-to.
-If \fIdirection\fR is specified, it must be \fBleft\fR or \fBright\fR;
-the gravity of \fImarkName\fR is set to the given value.
+.
+If \fIdirection\fR is not specified, returns \fBleft\fR or \fBright\fR to
+indicate which of its adjacent characters \fImarkName\fR is attached to. If
+\fIdirection\fR is specified, it must be \fBleft\fR or \fBright\fR; the
+gravity of \fImarkName\fR is set to the given value.
.TP
\fIpathName \fBmark names\fR
-Returns a list whose elements are the names of all the marks that
-are currently set.
+.
+Returns a list whose elements are the names of all the marks that are
+currently set.
.TP
\fIpathName \fBmark next \fIindex\fR
-Returns the name of the next mark at or after \fIindex\fR.
-If \fIindex\fR is specified in numerical form, then the search for
-the next mark begins at that index.
-If \fIindex\fR is the name of a mark, then the search for
-the next mark begins immediately after that mark.
-This can still return a mark at the same position if
-there are multiple marks at the same index.
-These semantics mean that the \fBmark next\fR operation can be used to
-step through all the marks in a text widget in the same order
-as the mark information returned by the \fIpathName \fBdump\fR operation.
-If a mark has been set to the special \fBend\fR index,
-then it appears to be \fIafter\fR \fBend\fR with respect to the \fIpathName \fBmark next\fR operation.
-An empty string is returned if there are no marks after \fIindex\fR.
+.
+Returns the name of the next mark at or after \fIindex\fR. If \fIindex\fR is
+specified in numerical form, then the search for the next mark begins at that
+index. If \fIindex\fR is the name of a mark, then the search for the next mark
+begins immediately after that mark. This can still return a mark at the same
+position if there are multiple marks at the same index. These semantics mean
+that the \fBmark next\fR operation can be used to step through all the marks
+in a text widget in the same order as the mark information returned by the
+\fIpathName \fBdump\fR operation. If a mark has been set to the special
+\fBend\fR index, then it appears to be \fIafter\fR \fBend\fR with respect to
+the \fIpathName \fBmark next\fR operation. An empty string is returned if
+there are no marks after \fIindex\fR.
.TP
\fIpathName \fBmark previous \fIindex\fR
-Returns the name of the mark at or before \fIindex\fR.
-If \fIindex\fR is specified in numerical form, then the search for
-the previous mark begins with the character just before that index.
-If \fIindex\fR is the name of a mark, then the search for
-the next mark begins immediately before that mark.
-This can still return a mark at the same position if
-there are multiple marks at the same index.
-These semantics mean that the \fIpathName \fBmark previous\fR operation can be used to
-step through all the marks in a text widget in the reverse order
-as the mark information returned by the \fIpathName \fBdump\fR operation.
-An empty string is returned if there are no marks before \fIindex\fR.
+.
+Returns the name of the mark at or before \fIindex\fR. If \fIindex\fR is
+specified in numerical form, then the search for the previous mark begins with
+the character just before that index. If \fIindex\fR is the name of a mark,
+then the search for the next mark begins immediately before that mark. This
+can still return a mark at the same position if there are multiple marks at
+the same index. These semantics mean that the \fIpathName \fBmark previous\fR
+operation can be used to step through all the marks in a text widget in the
+reverse order as the mark information returned by the \fIpathName \fBdump\fR
+operation. An empty string is returned if there are no marks before
+\fIindex\fR.
.TP
\fIpathName \fBmark set \fImarkName index\fR
-Sets the mark named \fImarkName\fR to a position just before the
-character at \fIindex\fR.
-If \fImarkName\fR already exists, it is moved from its old position;
-if it does not exist, a new mark is created.
-This command returns an empty string.
+.
+Sets the mark named \fImarkName\fR to a position just before the character at
+\fIindex\fR. If \fImarkName\fR already exists, it is moved from its old
+position; if it does not exist, a new mark is created. This command returns an
+empty string.
.TP
\fIpathName \fBmark unset \fImarkName \fR?\fImarkName markName ...\fR?
-Remove the mark corresponding to each of the \fImarkName\fR arguments.
-The removed marks will not be usable in indices and will not be
-returned by future calls to
+.
+Remove the mark corresponding to each of the \fImarkName\fR arguments. The
+removed marks will not be usable in indices and will not be returned by future
+calls to
.QW "\fIpathName \fBmark names\fR" .
This command returns an empty string.
.RE
.TP
\fIpathName \fBpeer\fR \fIoption args\fR
-.VS 8.5
-This command is used to create and query widget peers. It has
-two forms, depending on \fIoption\fR:
+.
+This command is used to create and query widget peers. It has two forms,
+depending on \fIoption\fR:
.RS
.TP
\fIpathName \fBpeer create \fInewPathName\fR ?\fIoptions\fR?
-Creates a peer text widget with the given \fInewPathName\fR, and any
-optional standard configuration options (as for the \fItext\fR command).
-By default the peer will have the same start and end line as the
-parent widget, but these can be overridden with the standard
-configuration options.
+.
+Creates a peer text widget with the given \fInewPathName\fR, and any optional
+standard configuration options (as for the \fItext\fR command). By default the
+peer will have the same start and end line as the parent widget, but these can
+be overridden with the standard configuration options.
.TP
\fIpathName \fBpeer names\fR
+.
Returns a list of peers of this widget (this does not include the widget
-itself). The order within this list is undefined.
+itself). The order within this list is undefined.
.RE
.TP
\fIpathName \fBreplace\fR \fIindex1 index2 chars\fR ?\fItagList chars tagList ...\fR?
-Replaces the range of characters between \fIindex1\fR and \fIindex2\fR
-with the given characters and tags. See the section on \fIpathName
-\fBinsert\fR for an explanation of the handling of the \fItagList...\fR
-arguments, and the section on \fIpathName
-\fBdelete\fR for an explanation of the handling of the indices. If
-\fIindex2\fR corresponds to an index earlier in the text than
+.
+Replaces the range of characters between \fIindex1\fR and \fIindex2\fR with
+the given characters and tags. See the section on \fIpathName \fBinsert\fR for
+an explanation of the handling of the \fItagList...\fR arguments, and the
+section on \fIpathName \fBdelete\fR for an explanation of the handling of the
+indices. If \fIindex2\fR corresponds to an index earlier in the text than
\fIindex1\fR, an error will be generated.
.RS
.PP
-The deletion and insertion are arranged so that no unnecessary
-scrolling of the window or movement of insertion cursor occurs. In
-addition the undo/redo stack are correctly modified, if undo operations
-are active in the text widget. The command returns an empty string.
+The deletion and insertion are arranged so that no unnecessary scrolling of
+the window or movement of insertion cursor occurs. In addition the undo/redo
+stack are correctly modified, if undo operations are active in the text
+widget. The command returns an empty string.
.RE
-.VE 8.5
.TP
\fIpathName \fBscan\fR \fIoption args\fR
-This command is used to implement scanning on texts. It has
-two forms, depending on \fIoption\fR:
+.
+This command is used to implement scanning on texts. It has two forms,
+depending on \fIoption\fR:
.RS
.TP
\fIpathName \fBscan mark \fIx y\fR
-Records \fIx\fR and \fIy\fR and the current view in the text window,
-for use in conjunction with later \fIpathName \fBscan dragto\fR commands.
-Typically this command is associated with a mouse button press in
-the widget. It returns an empty string.
+.
+Records \fIx\fR and \fIy\fR and the current view in the text window, for use
+in conjunction with later \fIpathName \fBscan dragto\fR commands. Typically
+this command is associated with a mouse button press in the widget. It returns
+an empty string.
.TP
\fIpathName \fBscan dragto \fIx y\fR
-This command computes the difference between its \fIx\fR and \fIy\fR
-arguments and the \fIx\fR and \fIy\fR arguments to the last
-\fIpathName \fBscan mark\fR command for the widget.
-It then adjusts the view by 10 times the difference in coordinates.
-This command is typically associated
-with mouse motion events in the widget, to produce the effect of
-dragging the text at high speed through the window. The return
-value is an empty string.
+.
+This command computes the difference between its \fIx\fR and \fIy\fR arguments
+and the \fIx\fR and \fIy\fR arguments to the last \fIpathName \fBscan mark\fR
+command for the widget. It then adjusts the view by 10 times the difference in
+coordinates. This command is typically associated with mouse motion events in
+the widget, to produce the effect of dragging the text at high speed through
+the window. The return value is an empty string.
.RE
.TP
\fIpathName \fBsearch \fR?\fIswitches\fR? \fIpattern index \fR?\fIstopIndex\fR?
-Searches the text in \fIpathName\fR starting at \fIindex\fR for a range
-of characters that matches \fIpattern\fR.
-If a match is found, the index of the first character in the match is
-returned as result; otherwise an empty string is returned.
-One or more of the following switches (or abbreviations thereof)
+.
+Searches the text in \fIpathName\fR starting at \fIindex\fR for a range of
+characters that matches \fIpattern\fR. If a match is found, the index of the
+first character in the match is returned as result; otherwise an empty string
+is returned. One or more of the following switches (or abbreviations thereof)
may be specified to control the search:
.RS
.TP
\fB\-forwards\fR
-The search will proceed forward through the text, finding the first
-matching range starting at or after the position given by \fIindex\fR.
-This is the default.
+.
+The search will proceed forward through the text, finding the first matching
+range starting at or after the position given by \fIindex\fR. This is the
+default.
.TP
\fB\-backwards\fR
-The search will proceed backward through the text, finding the
-matching range closest to \fIindex\fR whose first character
-is before \fIindex\fR
-.VS 8.5
-(it is not allowed to be at \fIindex\fR). Note that, for a variety of
-reasons, backwards searches can be substantially slower than forwards
-searches (particularly when using \fB\-regexp\fR), so it is recommended
-that performance-critical code use forward searches.
-.VE 8.5
+.
+The search will proceed backward through the text, finding the matching range
+closest to \fIindex\fR whose first character is before \fIindex\fR (it is not
+allowed to be at \fIindex\fR). Note that, for a variety of reasons, backwards
+searches can be substantially slower than forwards searches (particularly when
+using \fB\-regexp\fR), so it is recommended that performance-critical code use
+forward searches.
.TP
\fB\-exact\fR
-Use exact matching: the characters in the matching range must be
-identical to those in \fIpattern\fR.
-This is the default.
+.
+Use exact matching: the characters in the matching range must be identical to
+those in \fIpattern\fR. This is the default.
.TP
\fB\-regexp\fR
-Treat \fIpattern\fR as a regular expression and match it against
-the text using the rules for regular expressions (see the \fBregexp\fR
-command for details).
-.VS 8.5
-The default matching automatically passes
-both the \fB\-lineanchor\fR and \fB\-linestop\fR options
-to the regexp engine (unless \fB\-nolinestop\fR is used), so that
-\fI^$\fR match beginning and end of line, and \fI.\fR, \fI[^\fR
-sequences will never match the newline character \fI\en\fR.
-.VE 8.5
+.
+Treat \fIpattern\fR as a regular expression and match it against the text
+using the rules for regular expressions (see the \fBregexp\fR command for
+details). The default matching automatically passes both the
+\fB\-lineanchor\fR and \fB\-linestop\fR options to the regexp engine (unless
+\fB\-nolinestop\fR is used), so that \fI^$\fR match beginning and end of line,
+and \fI.\fR, \fI[^\fR sequences will never match the newline character
+\fI\en\fR.
.TP
\fB\-nolinestop\fR
-.VS 8.5
-This allows \fI.\fR and \fI[^\fR sequences to match the newline
-character \fI\en\fR, which they will otherwise not do (see the \fBregexp\fR
-command for details). This option is only meaningful if \fB\-regexp\fR
-is also given, and an error will be thrown otherwise. For example,
-to match the entire text, use
+.
+This allows \fI.\fR and \fI[^\fR sequences to match the newline character
+\fI\en\fR, which they will otherwise not do (see the \fBregexp\fR command for
+details). This option is only meaningful if \fB\-regexp\fR is also given, and
+an error will be thrown otherwise. For example, to match the entire text, use
.QW "\fIpathName \fBsearch \-nolinestop \-regexp\fR \N'34'.*\N'34' 1.0" .
-.VE 8.5
.TP
\fB\-nocase\fR
+.
Ignore case differences between the pattern and the text.
.TP
\fB\-count\fI varName\fR
-The argument following \fB\-count\fR gives the name of a variable;
-if a match is found, the number of index positions between beginning and
-end of the matching range will be stored in the variable. If there are no
-embedded images or windows in the matching range (and there are no
-elided characters if \fB\-elide\fR is not given), this is equivalent to the
-number of characters matched. In either case, the range \fImatchIdx\fR to
-\fImatchIdx + $count chars\fR will return the entire matched text.
+.
+The argument following \fB\-count\fR gives the name of a variable; if a match
+is found, the number of index positions between beginning and end of the
+matching range will be stored in the variable. If there are no embedded images
+or windows in the matching range (and there are no elided characters if
+\fB\-elide\fR is not given), this is equivalent to the number of characters
+matched. In either case, the range \fImatchIdx\fR to \fImatchIdx + $count
+chars\fR will return the entire matched text.
.TP
\fB\-all\fR
-.VS 8.5
-Find all matches in the given range and return a list of the indices of
-the first character of each match. If a \fB\-count\fI varName\fR switch is
-given, then \fIvarName\fR is also set to a list containing one element
-for each successful match. Note that, even for exact searches, the
-elements of this list may be different, if there are embedded images,
-windows or hidden text. Searches with \fB\-all\fR behave very
-similarly to the Tcl command \fBregexp \-all\fR, in that overlapping
-matches are not normally returned. For example, applying an
-\fB\-all\fR search of the pattern
+.
+Find all matches in the given range and return a list of the indices of the
+first character of each match. If a \fB\-count\fI varName\fR switch is given,
+then \fIvarName\fR is also set to a list containing one element for each
+successful match. Note that, even for exact searches, the elements of this
+list may be different, if there are embedded images, windows or hidden text.
+Searches with \fB\-all\fR behave very similarly to the Tcl command \fBregexp
+\-all\fR, in that overlapping matches are not normally returned. For example,
+applying an \fB\-all\fR search of the pattern
.QW \ew+
against
.QW "hello there"
@@ -1602,621 +1438,556 @@ will just match twice, once for each word, and matching
against
.QW ZooZooZoo
will just match once.
-.VE 8.5
.TP
\fB\-overlap\fR
-.VS 8.5
-When performing \fB\-all\fR searches, the normal behaviour is that
-matches which overlap an already-found match will not be returned. This
-switch changes that behaviour so that all matches which are not totally
-enclosed within another match are returned. For example, applying an
-\fB\-overlap\fR search of the pattern
+.
+When performing \fB\-all\fR searches, the normal behaviour is that matches
+which overlap an already-found match will not be returned. This switch changes
+that behaviour so that all matches which are not totally enclosed within
+another match are returned. For example, applying an \fB\-overlap\fR search of
+the pattern
.QW \ew+
against
.QW "hello there"
-will just match twice (i.e. no different to just \fB\-all\fR),
-but matching
+will just match twice (i.e. no different to just \fB\-all\fR), but matching
.QW Z[a\-z]+Z
against
.QW ZooZooZoo
-will now match twice.
-An error will be thrown if this switch is used without \fB\-all\fR.
-.VE 8.5
+will now match twice. An error will be thrown if this switch is used without
+\fB\-all\fR.
.TP
\fB\-strictlimits\fR
-.VS 8.5
-When performing any search, the normal behaviour is that
-the start and stop limits are checked with respect to the
-start of the matching text. With the \fB\-strictlimits\fR flag,
-the entire matching range must lie inside the start and stop
-limits specified for the match to be valid.
-.VE 8.5
+.
+When performing any search, the normal behaviour is that the start and stop
+limits are checked with respect to the start of the matching text. With the
+\fB\-strictlimits\fR flag, the entire matching range must lie inside the start
+and stop limits specified for the match to be valid.
.TP
\fB\-elide\fR
-Find elided (hidden) text as well. By default only displayed text is
-searched.
+.
+Find elided (hidden) text as well. By default only displayed text is searched.
.TP
\fB\-\|\-\fR
-This switch has no effect except to terminate the list of switches:
-the next argument will be treated as \fIpattern\fR even if it starts
-with \fB\-\fR.
+.
+This switch has no effect except to terminate the list of switches: the next
+argument will be treated as \fIpattern\fR even if it starts with \fB\-\fR.
.PP
-.VS 8.5
-The matching range may be within a single line of text, or run across
-multiple lines (if parts of the pattern can match a new-line). For
-regular expression matching one can use the various newline-matching
-features such as \fB$\fR to match the end of a line, \fB^\fR to match
-the beginning of a line, and to control
-whether \fB.\fR is allowed to match a new-line.
-.VE 8.5
-If \fIstopIndex\fR is specified, the search stops at that index:
-for forward searches, no match at or after \fIstopIndex\fR will
-be considered; for backward searches, no match earlier in the
-text than \fIstopIndex\fR will be considered.
-If \fIstopIndex\fR is omitted, the entire text will be searched:
-when the beginning or end of the text is reached, the search
-continues at the other end until the starting location is reached
-again; if \fIstopIndex\fR is specified, no wrap-around will occur.
-This means that, for example, if the search is \fB\-forwards\fR
-but \fIstopIndex\fR is earlier in the text than \fIstartIndex\fR,
-nothing will ever be found. See \fBKNOWN BUGS\fR below for a number of
-minor limitations of the \fIpathName \fBsearch\fR command.
+The matching range may be within a single line of text, or run across multiple
+lines (if parts of the pattern can match a new-line). For regular expression
+matching one can use the various newline-matching features such as \fB$\fR to
+match the end of a line, \fB^\fR to match the beginning of a line, and to
+control whether \fB.\fR is allowed to match a new-line. If \fIstopIndex\fR is
+specified, the search stops at that index: for forward searches, no match at
+or after \fIstopIndex\fR will be considered; for backward searches, no match
+earlier in the text than \fIstopIndex\fR will be considered. If
+\fIstopIndex\fR is omitted, the entire text will be searched: when the
+beginning or end of the text is reached, the search continues at the other end
+until the starting location is reached again; if \fIstopIndex\fR is specified,
+no wrap-around will occur. This means that, for example, if the search is
+\fB\-forwards\fR but \fIstopIndex\fR is earlier in the text than
+\fIstartIndex\fR, nothing will ever be found. See \fBKNOWN BUGS\fR below for a
+number of minor limitations of the \fIpathName \fBsearch\fR command.
.RE
.TP
\fIpathName \fBsee \fIindex\fR
-Adjusts the view in the window so that the character given by \fIindex\fR
-is completely visible.
-If \fIindex\fR is already visible then the command does nothing.
-If \fIindex\fR is a short distance out of view, the command
-adjusts the view just enough to make \fIindex\fR visible at the
-edge of the window.
-If \fIindex\fR is far out of view, then the command centers
-\fIindex\fR in the window.
+.
+Adjusts the view in the window so that the character given by \fIindex\fR is
+completely visible. If \fIindex\fR is already visible then the command does
+nothing. If \fIindex\fR is a short distance out of view, the command adjusts
+the view just enough to make \fIindex\fR visible at the edge of the window.
+If \fIindex\fR is far out of view, then the command centers \fIindex\fR in the
+window.
.TP
\fIpathName \fBtag \fIoption \fR?\fIarg arg ...\fR?
-This command is used to manipulate tags. The exact behavior of the
-command depends on the \fIoption\fR argument that follows the
-\fBtag\fR argument. The following forms of the command are currently
-supported:
+.
+This command is used to manipulate tags. The exact behavior of the command
+depends on the \fIoption\fR argument that follows the \fBtag\fR argument. The
+following forms of the command are currently supported:
.RS
.TP
\fIpathName \fBtag add \fItagName index1 \fR?\fIindex2 index1 index2 ...\fR?
-Associate the tag \fItagName\fR with all of the characters starting
-with \fIindex1\fR and ending just before
-\fIindex2\fR (the character at \fIindex2\fR is not tagged).
-A single command may contain any number of \fIindex1\fR\-\fIindex2\fR
-pairs.
-If the last \fIindex2\fR is omitted then the single character at
-\fIindex1\fR is tagged.
-If there are no characters in the specified range (e.g. \fIindex1\fR
-is past the end of the file or \fIindex2\fR is less than or equal
-to \fIindex1\fR) then the command has no effect.
+.
+Associate the tag \fItagName\fR with all of the characters starting with
+\fIindex1\fR and ending just before \fIindex2\fR (the character at
+\fIindex2\fR is not tagged). A single command may contain any number of
+\fIindex1\fR\-\fIindex2\fR pairs. If the last \fIindex2\fR is omitted then the
+single character at \fIindex1\fR is tagged. If there are no characters in the
+specified range (e.g. \fIindex1\fR is past the end of the file or \fIindex2\fR
+is less than or equal to \fIindex1\fR) then the command has no effect.
.TP
\fIpathName \fBtag bind \fItagName\fR ?\fIsequence\fR? ?\fIscript\fR?
-This command associates \fIscript\fR with the tag given by
-\fItagName\fR.
-Whenever the event sequence given by \fIsequence\fR occurs for a
-character that has been tagged with \fItagName\fR,
-the script will be invoked.
-This widget command is similar to the \fBbind\fR command except that
-it operates on characters in a text rather than entire widgets.
-See the \fBbind\fR manual entry for complete details
-on the syntax of \fIsequence\fR and the substitutions performed
-on \fIscript\fR before invoking it.
-If all arguments are specified then a new binding is created, replacing
-any existing binding for the same \fIsequence\fR and \fItagName\fR
-(if the first character of \fIscript\fR is
+.
+This command associates \fIscript\fR with the tag given by \fItagName\fR.
+Whenever the event sequence given by \fIsequence\fR occurs for a character
+that has been tagged with \fItagName\fR, the script will be invoked. This
+widget command is similar to the \fBbind\fR command except that it operates on
+characters in a text rather than entire widgets. See the \fBbind\fR manual
+entry for complete details on the syntax of \fIsequence\fR and the
+substitutions performed on \fIscript\fR before invoking it. If all arguments
+are specified then a new binding is created, replacing any existing binding
+for the same \fIsequence\fR and \fItagName\fR (if the first character of
+\fIscript\fR is
.QW +
-then \fIscript\fR augments an existing binding rather than replacing it).
-In this case the return value is an empty string.
-If \fIscript\fR is omitted then the command returns the \fIscript\fR
-associated with \fItagName\fR and \fIsequence\fR (an error occurs
-if there is no such binding).
-If both \fIscript\fR and \fIsequence\fR are omitted then the command
-returns a list of all the sequences for which bindings have been
-defined for \fItagName\fR.
+then \fIscript\fR augments an existing binding rather than replacing it). In
+this case the return value is an empty string. If \fIscript\fR is omitted then
+the command returns the \fIscript\fR associated with \fItagName\fR and
+\fIsequence\fR (an error occurs if there is no such binding). If both
+\fIscript\fR and \fIsequence\fR are omitted then the command returns a list of
+all the sequences for which bindings have been defined for \fItagName\fR.
.RS
.PP
-The only events for which bindings may be specified are those related
-to the mouse and keyboard (such as \fBEnter\fR, \fBLeave\fR,
-\fBButtonPress\fR, \fBMotion\fR, and \fBKeyPress\fR) or virtual events.
-Event bindings for a text widget use the \fBcurrent\fR mark described
-under \fBMARKS\fR above. An \fBEnter\fR event triggers for a tag when the tag
-first becomes present on the current character, and a \fBLeave\fR event
-triggers for a tag when it ceases to be present on the current character.
-\fBEnter\fR and \fBLeave\fR events can happen either because the
-\fBcurrent\fR mark moved or because the character at that position
-changed. Note that these events are different than \fBEnter\fR and
-\fBLeave\fR events for windows. Mouse and keyboard events are directed
-to the current character. If a virtual event is used in a binding, that
-binding can trigger only if the virtual event is defined by an underlying
+The only events for which bindings may be specified are those related to the
+mouse and keyboard (such as \fBEnter\fR, \fBLeave\fR, \fBButtonPress\fR,
+\fBMotion\fR, and \fBKeyPress\fR) or virtual events. Event bindings for a text
+widget use the \fBcurrent\fR mark described under \fBMARKS\fR above. An
+\fBEnter\fR event triggers for a tag when the tag first becomes present on the
+current character, and a \fBLeave\fR event triggers for a tag when it ceases
+to be present on the current character. \fBEnter\fR and \fBLeave\fR events can
+happen either because the \fBcurrent\fR mark moved or because the character at
+that position changed. Note that these events are different than \fBEnter\fR
+and \fBLeave\fR events for windows. Mouse and keyboard events are directed to
+the current character. If a virtual event is used in a binding, that binding
+can trigger only if the virtual event is defined by an underlying
mouse-related or keyboard-related event.
.PP
-It is possible for the current character to have multiple tags,
-and for each of them to have a binding for a particular event
-sequence.
-When this occurs, one binding is invoked for each tag, in order
-from lowest-priority to highest priority.
-If there are multiple matching bindings for a single tag, then
-the most specific binding is chosen (see the manual entry for
-the \fBbind\fR command for details).
-\fBcontinue\fR and \fBbreak\fR commands within binding scripts
-are processed in the same way as for bindings created with
-the \fBbind\fR command.
+It is possible for the current character to have multiple tags, and for each
+of them to have a binding for a particular event sequence. When this occurs,
+one binding is invoked for each tag, in order from lowest-priority to highest
+priority. If there are multiple matching bindings for a single tag, then the
+most specific binding is chosen (see the manual entry for the \fBbind\fR
+command for details). \fBcontinue\fR and \fBbreak\fR commands within binding
+scripts are processed in the same way as for bindings created with the
+\fBbind\fR command.
.PP
-If bindings are created for the widget as a whole using the
-\fBbind\fR command, then those bindings will supplement the
-tag bindings.
-The tag bindings will be invoked first, followed by bindings
-for the window as a whole.
+If bindings are created for the widget as a whole using the \fBbind\fR
+command, then those bindings will supplement the tag bindings. The tag
+bindings will be invoked first, followed by bindings for the window as a
+whole.
.RE
.TP
\fIpathName \fBtag cget\fR \fItagName option\fR
+.
This command returns the current value of the option named \fIoption\fR
-associated with the tag given by \fItagName\fR.
-\fIOption\fR may have any of the values accepted by the \fIpathName \fBtag
-configure\fR widget command.
+associated with the tag given by \fItagName\fR. \fIOption\fR may have any of
+the values accepted by the \fIpathName \fBtag configure\fR widget command.
.TP
\fIpathName \fBtag configure \fItagName\fR ?\fIoption\fR? ?\fIvalue\fR? ?\fIoption value ...\fR?
-This command is similar to the \fIpathName \fBconfigure\fR widget command except
-that it modifies options associated with the tag given by \fItagName\fR
-instead of modifying options for the overall text widget.
-If no \fIoption\fR is specified, the command returns a list describing
-all of the available options for \fItagName\fR (see \fBTk_ConfigureInfo\fR
-for information on the format of this list).
-If \fIoption\fR is specified with no \fIvalue\fR, then the command returns
-a list describing the one named option (this list will be identical to
-the corresponding sublist of the value returned if no \fIoption\fR
-is specified).
-If one or more \fIoption\-value\fR pairs are specified, then the command
-modifies the given option(s) to have the given value(s) in \fItagName\fR;
-in this case the command returns an empty string.
+.
+This command is similar to the \fIpathName \fBconfigure\fR widget command
+except that it modifies options associated with the tag given by \fItagName\fR
+instead of modifying options for the overall text widget. If no \fIoption\fR
+is specified, the command returns a list describing all of the available
+options for \fItagName\fR (see \fBTk_ConfigureInfo\fR for information on the
+format of this list). If \fIoption\fR is specified with no \fIvalue\fR, then
+the command returns a list describing the one named option (this list will be
+identical to the corresponding sublist of the value returned if no
+\fIoption\fR is specified). If one or more \fIoption\-value\fR pairs are
+specified, then the command modifies the given option(s) to have the given
+value(s) in \fItagName\fR; in this case the command returns an empty string.
See \fBTAGS\fR above for details on the options available for tags.
.TP
\fIpathName \fBtag delete \fItagName \fR?\fItagName ...\fR?
-Deletes all tag information for each of the \fItagName\fR
-arguments.
-The command removes the tags from all characters in the file
-and also deletes any other information associated with the tags,
-such as bindings and display information.
-The command returns an empty string.
+.
+Deletes all tag information for each of the \fItagName\fR arguments. The
+command removes the tags from all characters in the file and also deletes any
+other information associated with the tags, such as bindings and display
+information. The command returns an empty string.
.TP
\fIpathName\fB tag lower \fItagName \fR?\fIbelowThis\fR?
-Changes the priority of tag \fItagName\fR so that it is just lower
-in priority than the tag whose name is \fIbelowThis\fR.
-If \fIbelowThis\fR is omitted, then \fItagName\fR's priority
-is changed to make it lowest priority of all tags.
+.
+Changes the priority of tag \fItagName\fR so that it is just lower in priority
+than the tag whose name is \fIbelowThis\fR. If \fIbelowThis\fR is omitted,
+then \fItagName\fR's priority is changed to make it lowest priority of all
+tags.
.TP
\fIpathName \fBtag names \fR?\fIindex\fR?
-Returns a list whose elements are the names of all the tags that
-are active at the character position given by \fIindex\fR.
-If \fIindex\fR is omitted, then the return value will describe
-all of the tags that exist for the text (this includes all tags
-that have been named in a
+.
+Returns a list whose elements are the names of all the tags that are active at
+the character position given by \fIindex\fR. If \fIindex\fR is omitted, then
+the return value will describe all of the tags that exist for the text (this
+includes all tags that have been named in a
.QW "\fIpathName \fBtag\fR"
widget command but have not been deleted by a
.QW "\fIpathName \fBtag delete\fR"
-widget command, even if no characters are currently marked with the tag).
-The list will be sorted in order from lowest priority to highest
-priority.
+widget command, even if no characters are currently marked with the tag). The
+list will be sorted in order from lowest priority to highest priority.
.TP
\fIpathName \fBtag nextrange \fItagName index1 \fR?\fIindex2\fR?
-This command searches the text for a range of characters tagged
-with \fItagName\fR where the first character of the range is
-no earlier than the character at \fIindex1\fR and no later than
-the character just before \fIindex2\fR (a range starting at
-\fIindex2\fR will not be considered).
-If several matching ranges exist, the first one is chosen.
-The command's return value is a list containing
-two elements, which are the index of the first character of the
-range and the index of the character just after the last one in
-the range.
-If no matching range is found then the return value is an
-empty string.
-If \fIindex2\fR is not given then it defaults to the end of the text.
+.
+This command searches the text for a range of characters tagged with
+\fItagName\fR where the first character of the range is no earlier than the
+character at \fIindex1\fR and no later than the character just before
+\fIindex2\fR (a range starting at \fIindex2\fR will not be considered). If
+several matching ranges exist, the first one is chosen. The command's return
+value is a list containing two elements, which are the index of the first
+character of the range and the index of the character just after the last one
+in the range. If no matching range is found then the return value is an empty
+string. If \fIindex2\fR is not given then it defaults to the end of the text.
.TP
\fIpathName \fBtag prevrange \fItagName index1 \fR?\fIindex2\fR?
-This command searches the text for a range of characters tagged
-with \fItagName\fR where the first character of the range is
-before the character at \fIindex1\fR and no earlier than
-the character at \fIindex2\fR (a range starting at
-\fIindex2\fR will be considered).
-If several matching ranges exist, the one closest to \fIindex1\fR is chosen.
-The command's return value is a list containing
-two elements, which are the index of the first character of the
-range and the index of the character just after the last one in
-the range.
-If no matching range is found then the return value is an
-empty string.
+.
+This command searches the text for a range of characters tagged with
+\fItagName\fR where the first character of the range is before the character
+at \fIindex1\fR and no earlier than the character at \fIindex2\fR (a range
+starting at \fIindex2\fR will be considered). If several matching ranges
+exist, the one closest to \fIindex1\fR is chosen. The command's return value
+is a list containing two elements, which are the index of the first character
+of the range and the index of the character just after the last one in the
+range. If no matching range is found then the return value is an empty string.
If \fIindex2\fR is not given then it defaults to the beginning of the text.
.TP
\fIpathName\fB tag raise \fItagName \fR?\fIaboveThis\fR?
-Changes the priority of tag \fItagName\fR so that it is just higher
-in priority than the tag whose name is \fIaboveThis\fR.
-If \fIaboveThis\fR is omitted, then \fItagName\fR's priority
-is changed to make it highest priority of all tags.
+.
+Changes the priority of tag \fItagName\fR so that it is just higher in
+priority than the tag whose name is \fIaboveThis\fR. If \fIaboveThis\fR is
+omitted, then \fItagName\fR's priority is changed to make it highest priority
+of all tags.
.TP
\fIpathName \fBtag ranges \fItagName\fR
-Returns a list describing all of the ranges of text that have been
-tagged with \fItagName\fR.
-The first two elements of the list describe the first tagged range
-in the text, the next two elements describe the second range, and
-so on.
-The first element of each pair contains the index of the first
-character of the range, and the second element of the pair contains
-the index of the character just after the last one in the
-range.
-If there are no characters tagged with \fItag\fR then an
-empty string is returned.
+.
+Returns a list describing all of the ranges of text that have been tagged with
+\fItagName\fR. The first two elements of the list describe the first tagged
+range in the text, the next two elements describe the second range, and so on.
+The first element of each pair contains the index of the first character of
+the range, and the second element of the pair contains the index of the
+character just after the last one in the range. If there are no characters
+tagged with \fItag\fR then an empty string is returned.
.TP
\fIpathName \fBtag remove \fItagName index1 \fR?\fIindex2 index1 index2 ...\fR?
-Remove the tag \fItagName\fR from all of the characters starting
-at \fIindex1\fR and ending just before
-\fIindex2\fR (the character at \fIindex2\fR is not affected).
-A single command may contain any number of \fIindex1\fR\-\fIindex2\fR
-pairs.
-If the last \fIindex2\fR is omitted then the tag is removed from the
-single character at \fIindex1\fR.
-If there are no characters in the specified range (e.g. \fIindex1\fR
-is past the end of the file or \fIindex2\fR is less than or equal
-to \fIindex1\fR) then the command has no effect.
-This command returns an empty string.
+.
+Remove the tag \fItagName\fR from all of the characters starting at
+\fIindex1\fR and ending just before \fIindex2\fR (the character at
+\fIindex2\fR is not affected). A single command may contain any number of
+\fIindex1\fR\-\fIindex2\fR pairs. If the last \fIindex2\fR is omitted then the
+tag is removed from the single character at \fIindex1\fR. If there are no
+characters in the specified range (e.g. \fIindex1\fR is past the end of the
+file or \fIindex2\fR is less than or equal to \fIindex1\fR) then the command
+has no effect. This command returns an empty string.
.RE
.TP
\fIpathName \fBwindow \fIoption \fR?\fIarg arg ...\fR?
-This command is used to manipulate embedded windows.
-The behavior of the command depends on the \fIoption\fR argument
-that follows the \fBtag\fR argument.
-The following forms of the command are currently supported:
+.
+This command is used to manipulate embedded windows. The behavior of the
+command depends on the \fIoption\fR argument that follows the \fBtag\fR
+argument. The following forms of the command are currently supported:
.RS
.TP
\fIpathName \fBwindow cget\fR \fIindex option\fR
+.
Returns the value of a configuration option for an embedded window.
-\fIIndex\fR identifies the embedded window, and \fIoption\fR
-specifies a particular configuration option, which must be one of
-the ones listed in the section \fBEMBEDDED WINDOWS\fR.
+\fIIndex\fR identifies the embedded window, and \fIoption\fR specifies a
+particular configuration option, which must be one of the ones listed in the
+section \fBEMBEDDED WINDOWS\fR.
.TP
\fIpathName \fBwindow configure \fIindex\fR ?\fIoption value ...\fR?
-Query or modify the configuration options for an embedded window.
-If no \fIoption\fR is specified, returns a list describing all of
-the available options for the embedded window at \fIindex\fR
-(see \fBTk_ConfigureInfo\fR for information on the format of this list).
-If \fIoption\fR is specified with no \fIvalue\fR, then the command
-returns a list describing the one named option (this list will be
-identical to the corresponding sublist of the value returned if no
-\fIoption\fR is specified).
-If one or more \fIoption\-value\fR pairs are specified, then the command
-modifies the given option(s) to have the given value(s); in
-this case the command returns an empty string.
-See \fBEMBEDDED WINDOWS\fR for information on the options that
-are supported.
+.
+Query or modify the configuration options for an embedded window. If no
+\fIoption\fR is specified, returns a list describing all of the available
+options for the embedded window at \fIindex\fR (see \fBTk_ConfigureInfo\fR for
+information on the format of this list). If \fIoption\fR is specified with no
+\fIvalue\fR, then the command returns a list describing the one named option
+(this list will be identical to the corresponding sublist of the value
+returned if no \fIoption\fR is specified). If one or more \fIoption\-value\fR
+pairs are specified, then the command modifies the given option(s) to have the
+given value(s); in this case the command returns an empty string. See
+\fBEMBEDDED WINDOWS\fR for information on the options that are supported.
.TP
\fIpathName \fBwindow create \fIindex\fR ?\fIoption value ...\fR?
-This command creates a new window annotation, which will appear
-in the text at the position given by \fIindex\fR.
-Any number of \fIoption\-value\fR pairs may be specified to
-configure the annotation.
-See \fBEMBEDDED WINDOWS\fR for information on the options that
-are supported.
-Returns an empty string.
+.
+This command creates a new window annotation, which will appear in the text at
+the position given by \fIindex\fR. Any number of \fIoption\-value\fR pairs may
+be specified to configure the annotation. See \fBEMBEDDED WINDOWS\fR for
+information on the options that are supported. Returns an empty string.
.TP
\fIpathName \fBwindow names\fR
-Returns a list whose elements are the names of all windows currently
-embedded in \fIwindow\fR.
+.
+Returns a list whose elements are the names of all windows currently embedded
+in \fIwindow\fR.
.RE
.TP
\fIpathName \fBxview \fIoption args\fR
-This command is used to query and change the horizontal position of the
-text in the widget's window. It can take any of the following
-forms:
+.
+This command is used to query and change the horizontal position of the text
+in the widget's window. It can take any of the following forms:
.RS
.TP
\fIpathName \fBxview\fR
-Returns a list containing two elements.
-Each element is a real fraction between 0 and 1; together they describe
-the portion of the document's horizontal span that is visible in
-the window.
-For example, if the first element is .2 and the second element is .6,
-20% of the text is off-screen to the left, the middle 40% is visible
-in the window, and 40% of the text is off-screen to the right.
-The fractions refer only to the lines that are actually visible in the
-window: if the lines in the window are all very short, so that they
-are entirely visible, the returned fractions will be 0 and 1,
-even if there are other lines in the text that are
-much wider than the window.
+.
+Returns a list containing two elements. Each element is a real fraction
+between 0 and 1; together they describe the portion of the document's
+horizontal span that is visible in the window. For example, if the first
+element is .2 and the second element is .6, 20% of the text is off-screen to
+the left, the middle 40% is visible in the window, and 40% of the text is
+off-screen to the right. The fractions refer only to the lines that are
+actually visible in the window: if the lines in the window are all very short,
+so that they are entirely visible, the returned fractions will be 0 and 1,
+even if there are other lines in the text that are much wider than the window.
These are the same values passed to scrollbars via the \fB\-xscrollcommand\fR
option.
.TP
\fIpathName \fBxview moveto\fI fraction\fR
-Adjusts the view in the window so that \fIfraction\fR of the horizontal
-span of the text is off-screen to the left.
-\fIFraction\fR is a fraction between 0 and 1.
+.
+Adjusts the view in the window so that \fIfraction\fR of the horizontal span
+of the text is off-screen to the left. \fIFraction\fR is a fraction between 0
+and 1.
.TP
\fIpathName \fBxview scroll \fInumber what\fR
+.
This command shifts the view in the window left or right according to
-\fInumber\fR and \fIwhat\fR.
-\fIWhat\fR must be \fBunits\fR, \fBpages\fR or \fBpixels\fR.
-.VS 8.5
-If \fIwhat\fR is \fBunits\fR or \fBpages\fR then \fInumber\fR must be an
-integer, otherwise number may be specified in any of the forms acceptable
-to \fBTk_GetPixels\fR, such as
+\fInumber\fR and \fIwhat\fR. \fIWhat\fR must be \fBunits\fR, \fBpages\fR or
+\fBpixels\fR. If \fIwhat\fR is \fBunits\fR or \fBpages\fR then \fInumber\fR
+must be an integer, otherwise number may be specified in any of the forms
+acceptable to \fBTk_GetPixels\fR, such as
.QW 2.0c
or
.QW 1i
-(the result is rounded
-to the nearest integer value. If no units are given, pixels are
-assumed). If \fIwhat\fR is \fBunits\fR, the view adjusts left or right by
-\fInumber\fR average-width characters on the display; if it is
+(the result is rounded to the nearest integer value. If no units are given,
+pixels are assumed). If \fIwhat\fR is \fBunits\fR, the view adjusts left or
+right by \fInumber\fR average-width characters on the display; if it is
\fBpages\fR then the view adjusts by \fInumber\fR screenfuls; if it is
-\fBpixels\fR then the view adjusts by \fInumber\fR pixels. If
-.VE 8.5
-\fInumber\fR is negative then characters farther to the left become
-visible; if it is positive then characters farther to the right become
-visible.
+\fBpixels\fR then the view adjusts by \fInumber\fR pixels. If \fInumber\fR is
+negative then characters farther to the left become visible; if it is positive
+then characters farther to the right become visible.
.RE
.TP
\fIpathName \fByview \fI?args\fR?
-This command is used to query and change the vertical position of the
-text in the widget's window.
-It can take any of the following forms:
+.
+This command is used to query and change the vertical position of the text in
+the widget's window. It can take any of the following forms:
.RS
.TP
\fIpathName \fByview\fR
+.
Returns a list containing two elements, both of which are real fractions
-between 0 and 1.
-The first element gives the position of the first visible pixel of the
-first character (or image, etc) in the
-top line in the window, relative to the text as a whole (0.5 means
-it is halfway through the text, for example).
-The second element gives the position of the first pixel just after the
-last visible one in the bottom line of the window,
-relative to the text as a whole.
-These are the same values passed to scrollbars via the \fB\-yscrollcommand\fR
-option.
+between 0 and 1. The first element gives the position of the first visible
+pixel of the first character (or image, etc) in the top line in the window,
+relative to the text as a whole (0.5 means it is halfway through the text, for
+example). The second element gives the position of the first pixel just after
+the last visible one in the bottom line of the window, relative to the text as
+a whole. These are the same values passed to scrollbars via the
+\fB\-yscrollcommand\fR option.
.TP
\fIpathName \fByview moveto\fI fraction\fR
+.
Adjusts the view in the window so that the pixel given by \fIfraction\fR
-appears at the top of the top line of the window.
-\fIFraction\fR is a fraction between 0 and 1; 0 indicates the first
-pixel of the first character in the text, 0.33 indicates the pixel that is
-one-third the way through the text; and so on.
-.VS 8.5
-Values close to 1 will
-indicate values close to the last pixel in the text (1 actually refers
-to one pixel beyond the last pixel), but in such cases the widget will
-never scroll beyond the last pixel, and so a value of 1 will effectively
-be rounded back to whatever fraction ensures the last pixel is at the
-bottom of the window, and some other pixel is at the top.
-.VE 8.5
+appears at the top of the top line of the window. \fIFraction\fR is a fraction
+between 0 and 1; 0 indicates the first pixel of the first character in the
+text, 0.33 indicates the pixel that is one-third the way through the text; and
+so on. Values close to 1 will indicate values close to the last pixel in the
+text (1 actually refers to one pixel beyond the last pixel), but in such cases
+the widget will never scroll beyond the last pixel, and so a value of 1 will
+effectively be rounded back to whatever fraction ensures the last pixel is at
+the bottom of the window, and some other pixel is at the top.
.TP
\fIpathName \fByview scroll \fInumber what\fR
+.
This command adjust the view in the window up or down according to
-\fInumber\fR and \fIwhat\fR.
-\fIWhat\fR must be \fBunits\fR, \fBpages\fR or \fBpixels\fR.
-.VS 8.5
-If \fIwhat\fR is \fBunits\fR or \fBpages\fR then \fInumber\fR must be an
-integer, otherwise number may be specified in any of the forms acceptable
-to \fBTk_GetPixels\fR, such as
+\fInumber\fR and \fIwhat\fR. \fIWhat\fR must be \fBunits\fR, \fBpages\fR or
+\fBpixels\fR. If \fIwhat\fR is \fBunits\fR or \fBpages\fR then \fInumber\fR
+must be an integer, otherwise number may be specified in any of the forms
+acceptable to \fBTk_GetPixels\fR, such as
.QW 2.0c
or
.QW 1i
-(the result is rounded
-to the nearest integer value. If no units are given, pixels are
-assumed). If \fIwhat\fR is \fBunits\fR, the view adjusts up or down by
-\fInumber\fR lines on the display; if it is \fBpages\fR then the view
+(the result is rounded to the nearest integer value. If no units are given,
+pixels are assumed). If \fIwhat\fR is \fBunits\fR, the view adjusts up or down
+by \fInumber\fR lines on the display; if it is \fBpages\fR then the view
adjusts by \fInumber\fR screenfuls; if it is \fBpixels\fR then the view
-adjusts by \fInumber\fR pixels.
-.VE 8.5
-If \fInumber\fR is negative then earlier positions in the text
-become visible; if it is positive then later positions in the text
-become visible.
+adjusts by \fInumber\fR pixels. If \fInumber\fR is negative then earlier
+positions in the text become visible; if it is positive then later positions
+in the text become visible.
.TP
\fIpathName \fByview \fR?\fB\-pickplace\fR? \fIindex\fR
-Changes the view in the widget's window to make \fIindex\fR visible.
-If the \fB\-pickplace\fR option is not specified then \fIindex\fR will
-appear at the top of the window.
-If \fB\-pickplace\fR is specified then the widget chooses where
-\fIindex\fR appears in the window:
+.
+Changes the view in the widget's window to make \fIindex\fR visible. If the
+\fB\-pickplace\fR option is not specified then \fIindex\fR will appear at the
+top of the window. If \fB\-pickplace\fR is specified then the widget chooses
+where \fIindex\fR appears in the window:
.RS
.IP [1]
-If \fIindex\fR is already visible somewhere in the window then the
-command does nothing.
+If \fIindex\fR is already visible somewhere in the window then the command
+does nothing.
.IP [2]
-If \fIindex\fR is only a few lines off-screen above the window then
-it will be positioned at the top of the window.
+If \fIindex\fR is only a few lines off-screen above the window then it will be
+positioned at the top of the window.
.IP [3]
-If \fIindex\fR is only a few lines off-screen below the window then
-it will be positioned at the bottom of the window.
+If \fIindex\fR is only a few lines off-screen below the window then it will be
+positioned at the bottom of the window.
.IP [4]
Otherwise, \fIindex\fR will be centered in the window.
.LP
-The \fB\-pickplace\fR option has been obsoleted by the \fIpathName \fBsee\fR widget
-command (\fIpathName \fBsee\fR handles both x- and y-motion to make a location
-visible, whereas the \fB\-pickplace\fR mode only handles motion in y).
+The \fB\-pickplace\fR option has been obsoleted by the \fIpathName \fBsee\fR
+widget command (\fIpathName \fBsee\fR handles both x- and y-motion to make a
+location visible, whereas the \fB\-pickplace\fR mode only handles motion in
+y).
.RE
.TP
\fIpathName \fByview \fInumber\fR
-This command makes the first character on the line after
-the one given by \fInumber\fR visible at the top of the window.
-\fINumber\fR must be an integer.
-This command used to be used for scrolling, but now it is obsolete.
+.
+This command makes the first character on the line after the one given by
+\fInumber\fR visible at the top of the window. \fINumber\fR must be an
+integer. This command used to be used for scrolling, but now it is obsolete.
.RE
.SH BINDINGS
.PP
-Tk automatically creates class bindings for texts that give them
-the following default behavior.
-In the descriptions below,
+Tk automatically creates class bindings for texts that give them the following
+default behavior. In the descriptions below,
.QW word
-is dependent on the value of
-the \fBtcl_wordchars\fR variable. See \fBtclvars\fR(n).
+is dependent on the value of the \fBtcl_wordchars\fR variable. See
+\fBtclvars\fR(n).
.IP [1]
-Clicking mouse button 1 positions the insertion cursor
-just before the character underneath the mouse cursor, sets the
-input focus to this widget, and clears any selection in the widget.
-Dragging with mouse button 1 strokes out a selection between
-the insertion cursor and the character under the mouse.
+Clicking mouse button 1 positions the insertion cursor just before the
+character underneath the mouse cursor, sets the input focus to this widget,
+and clears any selection in the widget. Dragging with mouse button 1 strokes
+out a selection between the insertion cursor and the character under the
+mouse.
.IP [2]
-Double-clicking with mouse button 1 selects the word under the mouse
-and positions the insertion cursor at the start of the word.
-Dragging after a double click will stroke out a selection consisting
-of whole words.
+Double-clicking with mouse button 1 selects the word under the mouse and
+positions the insertion cursor at the start of the word. Dragging after a
+double click will stroke out a selection consisting of whole words.
.IP [3]
-Triple-clicking with mouse button 1 selects the line under the mouse
-and positions the insertion cursor at the start of the line.
-Dragging after a triple click will stroke out a selection consisting
-of whole lines.
+Triple-clicking with mouse button 1 selects the line under the mouse and
+positions the insertion cursor at the start of the line. Dragging after a
+triple click will stroke out a selection consisting of whole lines.
.IP [4]
-The ends of the selection can be adjusted by dragging with mouse
-button 1 while the Shift key is down; this will adjust the end
-of the selection that was nearest to the mouse cursor when button
-1 was pressed.
-If the button is double-clicked before dragging then the selection
-will be adjusted in units of whole words; if it is triple-clicked
-then the selection will be adjusted in units of whole lines.
+The ends of the selection can be adjusted by dragging with mouse button 1
+while the Shift key is down; this will adjust the end of the selection that
+was nearest to the mouse cursor when button 1 was pressed. If the button is
+double-clicked before dragging then the selection will be adjusted in units of
+whole words; if it is triple-clicked then the selection will be adjusted in
+units of whole lines.
.IP [5]
Clicking mouse button 1 with the Control key down will reposition the
insertion cursor without affecting the selection.
.IP [6]
-If any normal printing characters are typed, they are
-inserted at the point of the insertion cursor.
-.IP [7]
-The view in the widget can be adjusted by dragging with mouse button 2.
-If mouse button 2 is clicked without moving the mouse, the selection
-is copied into the text at the position of the mouse cursor.
-The Insert key also inserts the selection, but at the position of
+If any normal printing characters are typed, they are inserted at the point of
the insertion cursor.
+.IP [7]
+The view in the widget can be adjusted by dragging with mouse button 2. If
+mouse button 2 is clicked without moving the mouse, the selection is copied
+into the text at the position of the mouse cursor. The Insert key also inserts
+the selection, but at the position of the insertion cursor.
.IP [8]
-If the mouse is dragged out of the widget
-while button 1 is pressed, the entry will automatically scroll to
-make more text visible (if there is more text off-screen on the side
-where the mouse left the window).
+If the mouse is dragged out of the widget while button 1 is pressed, the entry
+will automatically scroll to make more text visible (if there is more text
+off-screen on the side where the mouse left the window).
.IP [9]
-The Left and Right keys move the insertion cursor one character to the
-left or right; they also clear any selection in the text.
-If Left or Right is typed with the Shift key down, then the insertion
-cursor moves and the selection is extended to include the new character.
-Control-Left and Control-Right move the insertion cursor by words, and
-Control-Shift-Left and Control-Shift-Right move the insertion cursor
-by words and also extend the selection.
-Control-b and Control-f behave the same as Left and Right, respectively.
-Meta-b and Meta-f behave the same as Control-Left and Control-Right,
-respectively.
+The Left and Right keys move the insertion cursor one character to the left or
+right; they also clear any selection in the text. If Left or Right is typed
+with the Shift key down, then the insertion cursor moves and the selection is
+extended to include the new character. Control-Left and Control-Right move the
+insertion cursor by words, and Control-Shift-Left and Control-Shift-Right move
+the insertion cursor by words and also extend the selection. Control-b and
+Control-f behave the same as Left and Right, respectively. Meta-b and Meta-f
+behave the same as Control-Left and Control-Right, respectively.
.IP [10]
-The Up and Down keys move the insertion cursor one line up or
-down and clear any selection in the text.
-If Up or Right is typed with the Shift key down, then the insertion
-cursor moves and the selection is extended to include the new character.
-Control-Up and Control-Down move the insertion cursor by paragraphs (groups
-of lines separated by blank lines), and
-Control-Shift-Up and Control-Shift-Down move the insertion cursor
-by paragraphs and also extend the selection.
-Control-p and Control-n behave the same as Up and Down, respectively.
+The Up and Down keys move the insertion cursor one line up or down and clear
+any selection in the text. If Up or Right is typed with the Shift key down,
+then the insertion cursor moves and the selection is extended to include the
+new character. Control-Up and Control-Down move the insertion cursor by
+paragraphs (groups of lines separated by blank lines), and Control-Shift-Up
+and Control-Shift-Down move the insertion cursor by paragraphs and also extend
+the selection. Control-p and Control-n behave the same as Up and Down,
+respectively.
.IP [11]
-The Next and Prior keys move the insertion cursor forward or backwards
-by one screenful and clear any selection in the text.
-If the Shift key is held down while Next or Prior is typed, then
-the selection is extended to include the new character.
+The Next and Prior keys move the insertion cursor forward or backwards by one
+screenful and clear any selection in the text. If the Shift key is held down
+while Next or Prior is typed, then the selection is extended to include the
+new character.
.IP [12]
Control-Next and Control-Prior scroll the view right or left by one page
without moving the insertion cursor or affecting the selection.
.IP [13]
-Home and Control-a move the insertion cursor to the
-beginning of its display line and clear any selection in the widget.
-Shift-Home moves the insertion cursor to the beginning of the display line
-and also extends the selection to that point.
+Home and Control-a move the insertion cursor to the beginning of its display
+line and clear any selection in the widget. Shift-Home moves the insertion
+cursor to the beginning of the display line and also extends the selection to
+that point.
.IP [14]
-End and Control-e move the insertion cursor to the
-end of the display line and clear any selection in the widget.
-Shift-End moves the cursor to the end of the display line and extends
-the selection to that point.
+End and Control-e move the insertion cursor to the end of the display line and
+clear any selection in the widget. Shift-End moves the cursor to the end of
+the display line and extends the selection to that point.
.IP [15]
-Control-Home and Meta-< move the insertion cursor to the beginning of
-the text and clear any selection in the widget.
-Control-Shift-Home moves the insertion cursor to the beginning of the text
-and also extends the selection to that point.
+Control-Home and Meta-< move the insertion cursor to the beginning of the text
+and clear any selection in the widget. Control-Shift-Home moves the insertion
+cursor to the beginning of the text and also extends the selection to that
+point.
.IP [16]
-Control-End and Meta-> move the insertion cursor to the end of the
-text and clear any selection in the widget.
-Control-Shift-End moves the cursor to the end of the text and extends
-the selection to that point.
+Control-End and Meta-> move the insertion cursor to the end of the text and
+clear any selection in the widget. Control-Shift-End moves the cursor to the
+end of the text and extends the selection to that point.
.IP [17]
-The Select key and Control-Space set the selection anchor to the position
-of the insertion cursor. They do not affect the current selection.
-Shift-Select and Control-Shift-Space adjust the selection to the
-current position of the insertion cursor, selecting from the anchor
-to the insertion cursor if there was not any selection previously.
+The Select key and Control-Space set the selection anchor to the position of
+the insertion cursor. They do not affect the current selection. Shift-Select
+and Control-Shift-Space adjust the selection to the current position of the
+insertion cursor, selecting from the anchor to the insertion cursor if there
+was not any selection previously.
.IP [18]
Control-/ selects the entire contents of the widget.
.IP [19]
Control-\e clears any selection in the widget.
.IP [20]
-The F16 key (labelled Copy on many Sun workstations) or Meta-w
-copies the selection in the widget to the clipboard, if there is a selection.
-This action is carried out by the command \fBtk_textCopy\fR.
+The F16 key (labelled Copy on many Sun workstations) or Meta-w copies the
+selection in the widget to the clipboard, if there is a selection. This
+action is carried out by the command \fBtk_textCopy\fR.
.IP [21]
-The F20 key (labelled Cut on many Sun workstations) or Control-w
-copies the selection in the widget to the clipboard and deletes
-the selection.
-This action is carried out by the command \fBtk_textCut\fR.
-If there is no selection in the widget then these keys have no effect.
+The F20 key (labelled Cut on many Sun workstations) or Control-w copies the
+selection in the widget to the clipboard and deletes the selection. This
+action is carried out by the command \fBtk_textCut\fR. If there is no
+selection in the widget then these keys have no effect.
.IP [22]
-The F18 key (labelled Paste on many Sun workstations) or Control-y
-inserts the contents of the clipboard at the position of the
-insertion cursor.
-This action is carried out by the command \fBtk_textPaste\fR.
+The F18 key (labelled Paste on many Sun workstations) or Control-y inserts the
+contents of the clipboard at the position of the insertion cursor. This action
+is carried out by the command \fBtk_textPaste\fR.
.IP [23]
-The Delete key deletes the selection, if there is one in the widget.
-If there is no selection, it deletes the character to the right of
-the insertion cursor.
+The Delete key deletes the selection, if there is one in the widget. If there
+is no selection, it deletes the character to the right of the insertion
+cursor.
.IP [24]
-Backspace and Control-h delete the selection, if there is one
-in the widget.
-If there is no selection, they delete the character to the left of
-the insertion cursor.
+Backspace and Control-h delete the selection, if there is one in the widget.
+If there is no selection, they delete the character to the left of the
+insertion cursor.
.IP [25]
Control-d deletes the character to the right of the insertion cursor.
.IP [26]
Meta-d deletes the word to the right of the insertion cursor.
.IP [27]
-Control-k deletes from the insertion cursor to the end of its line;
-if the insertion cursor is already at the end of a line, then
-Control-k deletes the newline character.
+Control-k deletes from the insertion cursor to the end of its line; if the
+insertion cursor is already at the end of a line, then Control-k deletes the
+newline character.
.IP [28]
-Control-o opens a new line by inserting a newline character in
-front of the insertion cursor without moving the insertion cursor.
+Control-o opens a new line by inserting a newline character in front of the
+insertion cursor without moving the insertion cursor.
.IP [29]
-Meta-backspace and Meta-Delete delete the word to the left of the
-insertion cursor.
+Meta-backspace and Meta-Delete delete the word to the left of the insertion
+cursor.
.IP [30]
-Control-x deletes whatever is selected in the text widget
-after copying it to the clipboard.
+Control-x deletes whatever is selected in the text widget after copying it to
+the clipboard.
.IP [31]
-Control-t reverses the order of the two characters to the right of
-the insertion cursor.
+Control-t reverses the order of the two characters to the right of the
+insertion cursor.
.IP [32]
-Control-z (and Control-underscore on UNIX when \fBtk_strictMotif\fR is
-true) undoes the last edit action if the \fB\-undo\fR option is true.
-Does nothing otherwise.
+Control-z (and Control-underscore on UNIX when \fBtk_strictMotif\fR is true)
+undoes the last edit action if the \fB\-undo\fR option is true. Does nothing
+otherwise.
.IP [33]
-Control-Z (or Control-y on Windows) reapplies the last undone edit
-action if the \fB\-undo\fR option is true. Does nothing otherwise.
+Control-Z (or Control-y on Windows) reapplies the last undone edit action if
+the \fB\-undo\fR option is true. Does nothing otherwise.
.PP
-If the widget is disabled using the \fB\-state\fR option, then its
-view can still be adjusted and text can still be selected,
-but no insertion cursor will be displayed and no text modifications will
-take place.
+If the widget is disabled using the \fB\-state\fR option, then its view can
+still be adjusted and text can still be selected, but no insertion cursor will
+be displayed and no text modifications will take place.
.PP
-The behavior of texts can be changed by defining new bindings for
-individual widgets or by redefining the class bindings.
+The behavior of texts can be changed by defining new bindings for individual
+widgets or by redefining the class bindings.
.SH "KNOWN ISSUES"
.SS "ISSUES CONCERNING CHARS AND INDICES"
-.VS 8.5
.PP
Before Tk 8.5, the widget used the string
.QW chars
-to refer to index positions (which included characters, embedded
-windows and embedded images). As of Tk 8.5 the text widget deals
-separately and correctly with
+to refer to index positions (which included characters, embedded windows and
+embedded images). As of Tk 8.5 the text widget deals separately and correctly
+with
.QW chars
and
.QW indices .
@@ -2224,87 +1995,76 @@ For backwards compatibility, however, the index modifiers
.QW "+N chars"
and
.QW "\-N chars"
-continue to refer to indices.
-One must use any of the full forms
+continue to refer to indices. One must use any of the full forms
.QW "+N any chars"
or
.QW "\-N any chars"
-etc. to refer to actual character indices. This confusion may be fixed in a
+etc. to refer to actual character indices. This confusion may be fixed in a
future release by making the widget correctly interpret
.QW "+N chars"
as a synonym for
.QW "+N any chars" .
-.VE 8.5
.SS "PERFORMANCE ISSUES"
.PP
-Text widgets should run efficiently under a variety
-of conditions. The text widget uses about 2-3 bytes of
-main memory for each byte of text, so texts containing a megabyte
-or more should be practical on most workstations.
-Text is represented internally with a modified B-tree structure
-that makes operations relatively efficient even with large texts.
-Tags are included in the B-tree structure in a way that allows
-tags to span large ranges or have many disjoint smaller ranges
-without loss of efficiency.
-Marks are also implemented in a way that allows large numbers of
-marks.
-In most cases it is fine to have large numbers of unique tags,
-or a tag that has many distinct ranges.
+Text widgets should run efficiently under a variety of conditions. The text
+widget uses about 2-3 bytes of main memory for each byte of text, so texts
+containing a megabyte or more should be practical on most workstations. Text
+is represented internally with a modified B-tree structure that makes
+operations relatively efficient even with large texts. Tags are included in
+the B-tree structure in a way that allows tags to span large ranges or have
+many disjoint smaller ranges without loss of efficiency. Marks are also
+implemented in a way that allows large numbers of marks. In most cases it is
+fine to have large numbers of unique tags, or a tag that has many distinct
+ranges.
.PP
-One performance problem can arise if you have hundreds or thousands
-of different tags that all have the following characteristics:
-the first and last ranges of each tag are near the beginning and
-end of the text, respectively,
-or a single tag range covers most of the text widget.
-The cost of adding and deleting tags like this is proportional
-to the number of other tags with the same properties.
-In contrast, there is no problem with having thousands of distinct
-tags if their overall ranges are localized and spread uniformly throughout
-the text.
+One performance problem can arise if you have hundreds or thousands of
+different tags that all have the following characteristics: the first and last
+ranges of each tag are near the beginning and end of the text, respectively,
+or a single tag range covers most of the text widget. The cost of adding and
+deleting tags like this is proportional to the number of other tags with the
+same properties. In contrast, there is no problem with having thousands of
+distinct tags if their overall ranges are localized and spread uniformly
+throughout the text.
.PP
-Very long text lines can be expensive,
-especially if they have many marks and tags within them.
+Very long text lines can be expensive, especially if they have many marks and
+tags within them.
.PP
-The display line with the insert cursor is redrawn each time the
-cursor blinks, which causes a steady stream of graphics traffic.
-Set the \fBinsertOffTime\fR attribute to 0 avoid this.
+The display line with the insert cursor is redrawn each time the cursor
+blinks, which causes a steady stream of graphics traffic. Set the
+\fBinsertOffTime\fR attribute to 0 avoid this.
.SS "KNOWN BUGS"
-.VS 8.5
.PP
-The \fIpathName \fBsearch \-regexp\fR sub-command attempts to perform sophisticated
-regexp matching across multiple lines in an efficient fashion (since Tk
-8.5), examining each line individually, and then in small groups of lines,
-whether searching forwards or backwards. Under certain conditions the
-search result might differ from that obtained by applying the same regexp
-to the entire text from the widget in one go. For example, when
-searching with a greedy regexp, the widget will continue to attempt to
-add extra lines to the match as long as one of two conditions are true:
-either Tcl's regexp library returns a code to indicate a longer match is
-possible (but there are known bugs in Tcl which mean this code is not
-always correctly returned); or if each extra line added results in at
-least a partial match with the pattern. This means in the case where the
-first extra line added results in no match and Tcl's regexp system
-returns the incorrect code and adding a second extra line would actually
-match, the text widget will return the wrong result. In practice this is
-a rare problem, but it can occur, for example:
+The \fIpathName \fBsearch \-regexp\fR sub-command attempts to perform
+sophisticated regexp matching across multiple lines in an efficient fashion
+(since Tk 8.5), examining each line individually, and then in small groups of
+lines, whether searching forwards or backwards. Under certain conditions the
+search result might differ from that obtained by applying the same regexp to
+the entire text from the widget in one go. For example, when searching with a
+greedy regexp, the widget will continue to attempt to add extra lines to the
+match as long as one of two conditions are true: either Tcl's regexp library
+returns a code to indicate a longer match is possible (but there are known
+bugs in Tcl which mean this code is not always correctly returned); or if each
+extra line added results in at least a partial match with the pattern. This
+means in the case where the first extra line added results in no match and
+Tcl's regexp system returns the incorrect code and adding a second extra line
+would actually match, the text widget will return the wrong result. In
+practice this is a rare problem, but it can occur, for example:
.CS
pack [text .t]
\.t insert 1.0 "aaaa\enbbbb\encccc\enbbbb\enaaaa\en"
\.t search \-regexp \-\- {(a+|b+\enc+\enb+)+\ena+} 1.0
.CE
-will not find a match when one exists of 19
-characters starting from the first
+will not find a match when one exists of 19 characters starting from the first
.QW b .
.PP
-Whenever one possible match is fully enclosed in another, the search
-command will attempt to ensure only the larger match is returned.
-When performing backwards regexp searches it is possible that Tcl
-will not always achieve this, in the case where a match is preceded by
-one or more short, non-overlapping matches, all of which are preceded
-by a large match which actually encompasses all of them. The search
-algorithm used by the widget does not look back arbitrarily far for a
-possible match which might cover large portions of the widget.
-For example:
+Whenever one possible match is fully enclosed in another, the search command
+will attempt to ensure only the larger match is returned. When performing
+backwards regexp searches it is possible that Tcl will not always achieve
+this, in the case where a match is preceded by one or more short,
+non-overlapping matches, all of which are preceded by a large match which
+actually encompasses all of them. The search algorithm used by the widget does
+not look back arbitrarily far for a possible match which might cover large
+portions of the widget. For example:
.CS
pack [text .t]
\.t insert 1.0 "aaaa\enbbbb\enbbbb\enbbbb\enbbbb\\n"
@@ -2323,7 +2083,6 @@ and
when really it should only match at
.QW 1.0
since that match encloses all the others.
-.VE 8.5
.SH "SEE ALSO"
entry(n), scrollbar(n)
.SH KEYWORDS