* generic/tkStubInit.c:

	* generic/tkDecls.h:
	* generic/tkIntXlibDecls.h:
	* generic/tkInt.decls: added XSetDashes and XWarpPointer
	* generic/tk.decls: added Tk_CreateSmoothMethod, and reserved
	two spots
	* generic/tk.h: added Tk_SmoothMethod struct,
	state item to canvas record, #defines for item state,
	support for using old char*-based canvas item C creation
	procedures with -DUSE_OLD_CANVAS,
	Tk_Dash, Tk_TSOffset (-offsets) & Tk_Outline structs and #defs,
	decls for dash, outline and postscript routines
	* generic/tkBind.c: added support for Quadruple clicks, and added
	the -warp option to 'event' with pointer warping routines
	* xlib/xgc.c:
	* generic/tkRectOval.c:
	* generic/tkCanvArc.c:
	* generic/tkCanvBmap.c:
	* generic/tkCanvImg.c:
	* generic/tkCanvLine.c:
	* generic/tkCanvPoly.c:
	* generic/tkCanvPs.c:
	* generic/tkCanvText.c:
	* generic/tkCanvUtil.c:
	* generic/tkCanvWind.c:
	* generic/tkCanvas.c:
	* generic/tkCanvas.h: Canvas and items received overhaul to with
	the addition of the dash patch (Nijtmans, et al)  This includes
	objectification of the 'canvas' command, as well as support for
	(where appropriate) dashes in items, extended stipple support,
	state for all items, and postscript generation of images and
	windows.  See the new canvas man page for related docs.
	* generic/tkEntry.c: added entry widget validation, see entry.n
	* generic/tkEvent.c: on simulated events, ButtonPress should
	be matched with ButtonRelease to be correct
	* generic/tkFont.c: corrected possible null reference
	* generic/tkFrame.c: made frame a Tcl_Obj based command
	* generic/tkGet.c: added TkGetDoublePixels
	* generic/tkImage.c: bug fixes from Img patch and new
	Tk_PostscriptImage and Tk_SetTSOrigin functions
	* generic/tkImgBmap.c: new ImgBmapPostscript function
	* generic/tkImgPhoto.c: new Tk_CreatePhotoOption, Tk_DitherPhoto
	* generic/tkInt.h: declarations for some new functions
	* generic/tkMessage.c: reworked relief drawing
	* generic/tkOldConfig.c: added TK_CONFIG_OBJS so old style
	ConfigureWidget calls can pass in Tcl_Obj arrays
	* generic/tkScrollbar.c:
	* generic/tkScrollbar.h: made -orient use an option table
	* generic/tkText.c:
	* generic/tkText.h: made -wrap and -state use option tables
	* generic/tkTextBTree.c:
	* generic/tkTextDisp.c:
	* generic/tkTextImage.c:
	* generic/tkTextMark.c:
	* generic/tkTextTag.c:
	* generic/tkTextWind.c: added support for -elide and -state hidden
	* generic/tkTrig.c: changed TkMakeBezierCurve to support returning
	the upper limit of points needed for spline
	* generic/tkUtil.c: new option table parsing routines
	* generic/tkWindow.c: init'ing of warp stuff, mouseButtonState

1 files changed, 1111 insertions, 177 deletions

diff --git a/generic/tkCanvPoly.c b/generic/tkCanvPoly.c
index ad5eb80..f64ccd6 100644
--- a/generic/tkCanvPoly.c
+++ b/generic/tkCanvPoly.c
@@ -9,12 +9,13 @@
  * See the file "license.terms" for information on usage and redistribution
  * of this file, and for a DISCLAIMER OF ALL WARRANTIES.
  *
- * RCS: @(#) $Id: tkCanvPoly.c,v 1.3 1999/04/16 01:51:11 stanton Exp $
+ * RCS: @(#) $Id: tkCanvPoly.c,v 1.4 1999/12/14 06:52:26 hobbs Exp $
  */
 
 #include <stdio.h>
 #include "tkInt.h"
 #include "tkPort.h"
+#include "tkCanvas.h"
 
 /*
  * The structure below defines the record for each polygon item.
@@ -23,7 +24,8 @@
 typedef struct PolygonItem  {
     Tk_Item header;		/* Generic stuff that's the same for all
 				 * types.  MUST BE FIRST IN STRUCTURE. */
-    int numPoints;		/* Number of points in polygon (always >= 3).
+    Tk_Outline outline;		/* Outline structure */
+    int numPoints;		/* Number of points in polygon.
 				 * Polygon is always closed. */
     int pointsAllocated;	/* Number of points for which space is
 				 * allocated at *coordPtr. */
@@ -31,13 +33,16 @@ typedef struct PolygonItem  {
 				 * x- and y-coords of all points in polygon.
 				 * X-coords are even-valued indices, y-coords
 				 * are corresponding odd-valued indices. */
-    int width;			/* Width of outline. */
-    XColor *outlineColor;	/* Color for outline. */
-    GC outlineGC;		/* Graphics context for drawing outline. */
+    int joinStyle;		/* Join style for outline */
+    Tk_TSOffset tsoffset;
     XColor *fillColor;		/* Foreground color for polygon. */
+    XColor *activeFillColor;	/* Foreground color for polygon if state is active. */
+    XColor *disabledFillColor;	/* Foreground color for polygon if state is disabled. */
     Pixmap fillStipple;		/* Stipple bitmap for filling polygon. */
+    Pixmap activeFillStipple;	/* Stipple bitmap for filling polygon if state is active. */
+    Pixmap disabledFillStipple;	/* Stipple bitmap for filling polygon if state is disabled. */
     GC fillGC;			/* Graphics context for filling polygon. */
-    int smooth;			/* Non-zero means draw shape smoothed (i.e.
+    Tk_SmoothMethod *smooth;	/* Non-zero means draw shape smoothed (i.e.
 				 * with Bezier splines). */
     int splineSteps;		/* Number of steps in each spline segment. */
     int autoClosed;		/* Zero means the given polygon was closed,
@@ -48,25 +53,106 @@ typedef struct PolygonItem  {
  * Information used for parsing configuration specs:
  */
 
-static Tk_CustomOption tagsOption = {Tk_CanvasTagsParseProc,
+static Tk_CustomOption smoothOption = {
+    (Tk_OptionParseProc *) TkSmoothParseProc,
+    TkSmoothPrintProc, (ClientData) NULL
+};
+static Tk_CustomOption stateOption = {
+    (Tk_OptionParseProc *) TkStateParseProc,
+    TkStatePrintProc, (ClientData) 2
+};
+static Tk_CustomOption tagsOption = {
+    (Tk_OptionParseProc *) Tk_CanvasTagsParseProc,
     Tk_CanvasTagsPrintProc, (ClientData) NULL
 };
+static Tk_CustomOption dashOption = {
+    (Tk_OptionParseProc *) TkCanvasDashParseProc,
+    TkCanvasDashPrintProc, (ClientData) NULL
+};
+static Tk_CustomOption offsetOption = {
+    (Tk_OptionParseProc *) TkOffsetParseProc,
+    TkOffsetPrintProc,
+    (ClientData) (TK_OFFSET_RELATIVE|TK_OFFSET_INDEX)
+};
+static Tk_CustomOption pixelOption = {
+    (Tk_OptionParseProc *) TkPixelParseProc,
+    TkPixelPrintProc, (ClientData) NULL
+};
 
 static Tk_ConfigSpec configSpecs[] = {
+    {TK_CONFIG_CUSTOM, "-activedash", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(PolygonItem, outline.activeDash),
+	TK_CONFIG_NULL_OK, &dashOption},
+    {TK_CONFIG_COLOR, "-activefill", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(PolygonItem, activeFillColor),
+	TK_CONFIG_NULL_OK},
+    {TK_CONFIG_COLOR, "-activeoutline", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(PolygonItem, outline.activeColor),
+	TK_CONFIG_NULL_OK},
+    {TK_CONFIG_BITMAP, "-activeoutlinestipple", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(PolygonItem, outline.activeStipple),
+	TK_CONFIG_NULL_OK},
+    {TK_CONFIG_BITMAP, "-activestipple", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(PolygonItem, activeFillStipple),
+	TK_CONFIG_NULL_OK},
+    {TK_CONFIG_CUSTOM, "-activewidth", (char *) NULL, (char *) NULL,
+	"0.0", Tk_Offset(PolygonItem, outline.activeWidth),
+	TK_CONFIG_DONT_SET_DEFAULT, &pixelOption},
+    {TK_CONFIG_CUSTOM, "-dash", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(PolygonItem, outline.dash),
+	TK_CONFIG_NULL_OK, &dashOption},
+    {TK_CONFIG_PIXELS, "-dashoffset", (char *) NULL, (char *) NULL,
+	"0", Tk_Offset(PolygonItem, outline.offset),
+	TK_CONFIG_DONT_SET_DEFAULT},
+    {TK_CONFIG_CUSTOM, "-disableddash", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(PolygonItem, outline.disabledDash),
+	TK_CONFIG_NULL_OK, &dashOption},
+    {TK_CONFIG_COLOR, "-disabledfill", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(PolygonItem, disabledFillColor),
+	TK_CONFIG_NULL_OK},
+    {TK_CONFIG_COLOR, "-disabledoutline", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(PolygonItem, outline.disabledColor),
+	TK_CONFIG_NULL_OK},
+    {TK_CONFIG_BITMAP, "-disabledoutlinestipple", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(PolygonItem, outline.disabledStipple),
+	TK_CONFIG_NULL_OK},
+    {TK_CONFIG_BITMAP, "-disabledstipple", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(PolygonItem, disabledFillStipple),
+	TK_CONFIG_NULL_OK},
+    {TK_CONFIG_CUSTOM, "-disabledwidth", (char *) NULL, (char *) NULL,
+	"0.0", Tk_Offset(PolygonItem, outline.disabledWidth),
+	TK_CONFIG_DONT_SET_DEFAULT, &pixelOption},
     {TK_CONFIG_COLOR, "-fill", (char *) NULL, (char *) NULL,
 	"black", Tk_Offset(PolygonItem, fillColor), TK_CONFIG_NULL_OK},
+    {TK_CONFIG_JOIN_STYLE, "-joinstyle", (char *) NULL, (char *) NULL,
+	"round", Tk_Offset(PolygonItem, joinStyle), TK_CONFIG_DONT_SET_DEFAULT},
+    {TK_CONFIG_CUSTOM, "-offset", (char *) NULL, (char *) NULL,
+	"0,0", Tk_Offset(PolygonItem, tsoffset),
+	TK_CONFIG_NULL_OK, &offsetOption},
     {TK_CONFIG_COLOR, "-outline", (char *) NULL, (char *) NULL,
-	(char *) NULL, Tk_Offset(PolygonItem, outlineColor), TK_CONFIG_NULL_OK},
-    {TK_CONFIG_BOOLEAN, "-smooth", (char *) NULL, (char *) NULL,
-	"0", Tk_Offset(PolygonItem, smooth), TK_CONFIG_DONT_SET_DEFAULT},
+	(char *) NULL, Tk_Offset(PolygonItem, outline.color),
+	TK_CONFIG_NULL_OK},
+    {TK_CONFIG_CUSTOM, "-outlineoffset", (char *) NULL, (char *) NULL,
+	"0,0", Tk_Offset(PolygonItem, outline.tsoffset),
+	TK_CONFIG_NULL_OK, &offsetOption},
+    {TK_CONFIG_BITMAP, "-outlinestipple", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(PolygonItem, outline.stipple),
+	TK_CONFIG_NULL_OK},
+    {TK_CONFIG_CUSTOM, "-smooth", (char *) NULL, (char *) NULL,
+	"0", Tk_Offset(PolygonItem, smooth),
+	TK_CONFIG_DONT_SET_DEFAULT, &smoothOption},
     {TK_CONFIG_INT, "-splinesteps", (char *) NULL, (char *) NULL,
 	"12", Tk_Offset(PolygonItem, splineSteps), TK_CONFIG_DONT_SET_DEFAULT},
+    {TK_CONFIG_CUSTOM, "-state", (char *) NULL, (char *) NULL,
+	(char *) NULL, Tk_Offset(Tk_Item, state), TK_CONFIG_NULL_OK,
+	&stateOption},
     {TK_CONFIG_BITMAP, "-stipple", (char *) NULL, (char *) NULL,
 	(char *) NULL, Tk_Offset(PolygonItem, fillStipple), TK_CONFIG_NULL_OK},
     {TK_CONFIG_CUSTOM, "-tags", (char *) NULL, (char *) NULL,
 	(char *) NULL, 0, TK_CONFIG_NULL_OK, &tagsOption},
-    {TK_CONFIG_PIXELS, "-width", (char *) NULL, (char *) NULL,
-	"1", Tk_Offset(PolygonItem, width), TK_CONFIG_DONT_SET_DEFAULT},
+    {TK_CONFIG_CUSTOM, "-width", (char *) NULL, (char *) NULL,
+	"1.0", Tk_Offset(PolygonItem, outline.width),
+	TK_CONFIG_DONT_SET_DEFAULT, &pixelOption},
     {TK_CONFIG_END, (char *) NULL, (char *) NULL, (char *) NULL,
 	(char *) NULL, 0, 0}
 };
@@ -79,18 +165,25 @@ static void		ComputePolygonBbox _ANSI_ARGS_((Tk_Canvas canvas,
 			    PolygonItem *polyPtr));
 static int		ConfigurePolygon _ANSI_ARGS_((Tcl_Interp *interp,
 			    Tk_Canvas canvas, Tk_Item *itemPtr, int argc,
-			    char **argv, int flags));
+			    Tcl_Obj *CONST argv[], int flags));
 static int		CreatePolygon _ANSI_ARGS_((Tcl_Interp *interp,
 			    Tk_Canvas canvas, struct Tk_Item *itemPtr,
-			    int argc, char **argv));
+			    int argc, Tcl_Obj *CONST argv[]));
 static void		DeletePolygon _ANSI_ARGS_((Tk_Canvas canvas,
 			    Tk_Item *itemPtr,  Display *display));
 static void		DisplayPolygon _ANSI_ARGS_((Tk_Canvas canvas,
 			    Tk_Item *itemPtr, Display *display, Drawable dst,
 			    int x, int y, int width, int height));
+static int		GetPolygonIndex _ANSI_ARGS_((Tcl_Interp *interp,
+			    Tk_Canvas canvas, Tk_Item *itemPtr,
+			    Tcl_Obj *obj, int *indexPtr));
 static int		PolygonCoords _ANSI_ARGS_((Tcl_Interp *interp,
 			    Tk_Canvas canvas, Tk_Item *itemPtr,
-			    int argc, char **argv));
+			    int argc, Tcl_Obj *CONST argv[]));
+static void		PolygonDeleteCoords _ANSI_ARGS_((Tk_Canvas canvas,
+			    Tk_Item *itemPtr, int first, int last));
+static void		PolygonInsert _ANSI_ARGS_((Tk_Canvas canvas,
+			    Tk_Item *itemPtr, int beforeThis, Tcl_Obj *obj));
 static int		PolygonToArea _ANSI_ARGS_((Tk_Canvas canvas,
 			    Tk_Item *itemPtr, double *rectPtr));
 static double		PolygonToPoint _ANSI_ARGS_((Tk_Canvas canvas,
@@ -117,18 +210,18 @@ Tk_ItemType tkPolygonType = {
     PolygonCoords,			/* coordProc */
     DeletePolygon,			/* deleteProc */
     DisplayPolygon,			/* displayProc */
-    0,					/* alwaysRedraw */
+    TK_CONFIG_OBJS,			/* flags */
     PolygonToPoint,			/* pointProc */
     PolygonToArea,			/* areaProc */
     PolygonToPostscript,		/* postscriptProc */
     ScalePolygon,			/* scaleProc */
     TranslatePolygon,			/* translateProc */
-    (Tk_ItemIndexProc *) NULL,		/* indexProc */
+    (Tk_ItemIndexProc *) GetPolygonIndex,/* indexProc */
     (Tk_ItemCursorProc *) NULL,		/* icursorProc */
     (Tk_ItemSelectionProc *) NULL,	/* selectionProc */
-    (Tk_ItemInsertProc *) NULL,		/* insertProc */
-    (Tk_ItemDCharsProc *) NULL,		/* dTextProc */
-    (Tk_ItemType *) NULL		/* nextPtr */
+    (Tk_ItemInsertProc *) PolygonInsert,/* insertProc */
+    PolygonDeleteCoords,		/* dTextProc */
+    (Tk_ItemType *) NULL,		/* nextPtr */
 };
 
 /*
@@ -167,34 +260,32 @@ CreatePolygon(interp, canvas, itemPtr, argc, argv)
     Tk_Item *itemPtr;			/* Record to hold new item;  header
 					 * has been initialized by caller. */
     int argc;				/* Number of arguments in argv. */
-    char **argv;			/* Arguments describing polygon. */
+    Tcl_Obj *CONST argv[];		/* Arguments describing polygon. */
 {
     PolygonItem *polyPtr = (PolygonItem *) itemPtr;
     int i;
 
-    if (argc < 6) {
-	Tcl_AppendResult(interp, "wrong # args: should be \"",
-		Tk_PathName(Tk_CanvasTkwin(canvas)), " create ",
-		itemPtr->typePtr->name,
-		" x1 y1 x2 y2 x3 y3 ?x4 y4 ...? ?options?\"", (char *) NULL);
-	return TCL_ERROR;
-    }
-
     /*
      * Carry out initialization that is needed in order to clean
      * up after errors during the the remainder of this procedure.
      */
 
+    Tk_CreateOutline(&(polyPtr->outline));
     polyPtr->numPoints = 0;
     polyPtr->pointsAllocated = 0;
     polyPtr->coordPtr = NULL;
-    polyPtr->width = 1;
-    polyPtr->outlineColor = NULL;
-    polyPtr->outlineGC = None;
+    polyPtr->joinStyle = JoinRound;
+    polyPtr->tsoffset.flags = 0;
+    polyPtr->tsoffset.xoffset = 0;
+    polyPtr->tsoffset.yoffset = 0;
     polyPtr->fillColor = NULL;
+    polyPtr->activeFillColor = NULL;
+    polyPtr->disabledFillColor = NULL;
     polyPtr->fillStipple = None;
+    polyPtr->activeFillStipple = None;
+    polyPtr->disabledFillStipple = None;
     polyPtr->fillGC = None;
-    polyPtr->smooth = 0;
+    polyPtr->smooth = (Tk_SmoothMethod *) NULL;
     polyPtr->splineSteps = 12;
     polyPtr->autoClosed = 0;
 
@@ -204,13 +295,14 @@ CreatePolygon(interp, canvas, itemPtr, argc, argv)
      * start with a digit or a minus sign followed by a digit.
      */
 
-    for (i = 4; i < (argc-1); i+=2) {
-	if ((!isdigit(UCHAR(argv[i][0]))) &&
-		((argv[i][0] != '-') || (!isdigit(UCHAR(argv[i][1]))))) {
+    for (i = 0; i < argc; i++) {
+	char *arg = Tcl_GetStringFromObj((Tcl_Obj *) argv[i], NULL);
+	if ((arg[0] == '-') && (arg[1] >= 'a')
+		&& (arg[1] <= 'z')) {
 	    break;
 	}
     }
-    if (PolygonCoords(interp, canvas, itemPtr, i, argv) != TCL_OK) {
+    if (i && PolygonCoords(interp, canvas, itemPtr, i, argv) != TCL_OK) {
 	goto error;
     }
 
@@ -250,11 +342,10 @@ PolygonCoords(interp, canvas, itemPtr, argc, argv)
 					 * read or modified. */
     int argc;				/* Number of coordinates supplied in
 					 * argv. */
-    char **argv;			/* Array of coordinates: x1, y1,
+    Tcl_Obj *CONST argv[];		/* Array of coordinates: x1, y1,
 					 * x2, y2, ... */
 {
     PolygonItem *polyPtr = (PolygonItem *) itemPtr;
-    char buffer[TCL_DOUBLE_SPACE];
     int i, numPoints;
 
     if (argc == 0) {
@@ -262,16 +353,21 @@ PolygonCoords(interp, canvas, itemPtr, argc, argv)
 	 * Print the coords used to create the polygon.  If we auto
 	 * closed the polygon then we don't report the last point.
 	 */
+	Tcl_Obj *subobj, *obj = Tcl_NewObj();
 	for (i = 0; i < 2*(polyPtr->numPoints - polyPtr->autoClosed); i++) {
-	    Tcl_PrintDouble(interp, polyPtr->coordPtr[i], buffer);
-	    Tcl_AppendElement(interp, buffer);
+	    subobj = Tcl_NewDoubleObj(polyPtr->coordPtr[i]);
+	    Tcl_ListObjAppendElement(interp, obj, subobj);
 	}
-    } else if (argc < 6) {
-	Tcl_AppendResult(interp,
-		"too few coordinates for polygon: must have at least 6",
-		(char *) NULL);
-	return TCL_ERROR;
-    } else if (argc & 1) {
+	Tcl_SetObjResult(interp, obj);
+	return TCL_OK;
+    }
+    if (argc == 1) {
+	if (Tcl_ListObjGetElements(interp, argv[0], &argc,
+		(Tcl_Obj ***) &argv) != TCL_OK) {
+	    return TCL_ERROR;
+	}
+    }
+    if (argc & 1) {
 	Tcl_AppendResult(interp,
 		"odd number of coordinates specified for polygon",
 		(char *) NULL);
@@ -284,8 +380,8 @@ PolygonCoords(interp, canvas, itemPtr, argc, argv)
 	    }
 
 	    /*
-	     * One extra point gets allocated here, just in case we have
-	     * to add another point to close the polygon.
+	     * One extra point gets allocated here, because we always
+	     * add another point to close the polygon.
 	     */
 
 	    polyPtr->coordPtr = (double *) ckalloc((unsigned)
@@ -293,20 +389,20 @@ PolygonCoords(interp, canvas, itemPtr, argc, argv)
 	    polyPtr->pointsAllocated = numPoints+1;
 	}
 	for (i = argc-1; i >= 0; i--) {
-	    if (Tk_CanvasGetCoord(interp, canvas, argv[i],
+	    if (Tk_CanvasGetCoordFromObj(interp, canvas, argv[i],
 		    &polyPtr->coordPtr[i]) != TCL_OK) {
 		return TCL_ERROR;
 	    }
 	}
 	polyPtr->numPoints = numPoints;
 	polyPtr->autoClosed = 0;
-    
+
 	/*
 	 * Close the polygon if it isn't already closed.
 	 */
     
-	if ((polyPtr->coordPtr[argc-2] != polyPtr->coordPtr[0])
-		|| (polyPtr->coordPtr[argc-1] != polyPtr->coordPtr[1])) {
+	if (argc>2 && ((polyPtr->coordPtr[argc-2] != polyPtr->coordPtr[0])
+		|| (polyPtr->coordPtr[argc-1] != polyPtr->coordPtr[1]))) {
 	    polyPtr->autoClosed = 1;
 	    polyPtr->numPoints++;
 	    polyPtr->coordPtr[argc] = polyPtr->coordPtr[0];
@@ -342,7 +438,7 @@ ConfigurePolygon(interp, canvas, itemPtr, argc, argv, flags)
     Tk_Canvas canvas;		/* Canvas containing itemPtr. */
     Tk_Item *itemPtr;		/* Polygon item to reconfigure. */
     int argc;			/* Number of elements in argv.  */
-    char **argv;		/* Arguments describing things to configure. */
+    Tcl_Obj *CONST argv[];	/* Arguments describing things to configure. */
     int flags;			/* Flags to pass to Tk_ConfigureWidget. */
 {
     PolygonItem *polyPtr = (PolygonItem *) itemPtr;
@@ -350,10 +446,13 @@ ConfigurePolygon(interp, canvas, itemPtr, argc, argv, flags)
     GC newGC;
     unsigned long mask;
     Tk_Window tkwin;
+    XColor *color;
+    Pixmap stipple;
+    Tk_State state;
 
     tkwin = Tk_CanvasTkwin(canvas);
-    if (Tk_ConfigureWidget(interp, tkwin, configSpecs, argc, argv,
-	    (char *) polyPtr, flags) != TCL_OK) {
+    if (Tk_ConfigureWidget(interp, tkwin, configSpecs, argc, (char **) argv,
+	    (char *) polyPtr, flags|TK_CONFIG_OBJS) != TCL_OK) {
 	return TCL_ERROR;
     }
 
@@ -362,31 +461,66 @@ ConfigurePolygon(interp, canvas, itemPtr, argc, argv, flags)
      * graphics contexts.
      */
 
-    if (polyPtr->width < 1) {
-	polyPtr->width = 1;
-    }
-    if (polyPtr->outlineColor == NULL) {
-	newGC = None;
+    state = itemPtr->state;
+
+    if (polyPtr->outline.activeWidth > polyPtr->outline.width ||
+	    polyPtr->outline.activeDash.number > 0 ||
+	    polyPtr->outline.activeColor != NULL ||
+	    polyPtr->outline.activeStipple != None ||
+	    polyPtr->activeFillColor != NULL ||
+	    polyPtr->activeFillStipple != None) {
+	itemPtr->redraw_flags |= TK_ITEM_STATE_DEPENDANT;
     } else {
-	gcValues.foreground = polyPtr->outlineColor->pixel;
-	gcValues.line_width = polyPtr->width;
+	itemPtr->redraw_flags &= ~TK_ITEM_STATE_DEPENDANT;
+    }
+
+    if(state == TK_STATE_NULL) {
+	state = ((TkCanvas *)canvas)->canvas_state;
+    }
+    if (state==TK_STATE_HIDDEN) {
+	ComputePolygonBbox(canvas, polyPtr);
+	return TCL_OK;
+    }
+
+    mask = Tk_ConfigOutlineGC(&gcValues, canvas, itemPtr, &(polyPtr->outline));
+    if (mask) {
 	gcValues.cap_style = CapRound;
-	gcValues.join_style = JoinRound;
-	mask = GCForeground|GCLineWidth|GCCapStyle|GCJoinStyle;
+	gcValues.join_style = polyPtr->joinStyle;
+	mask |= GCCapStyle|GCJoinStyle;
 	newGC = Tk_GetGC(tkwin, mask, &gcValues);
+    } else {
+	newGC = None;
+    }
+    if (polyPtr->outline.gc != None) {
+	Tk_FreeGC(Tk_Display(tkwin), polyPtr->outline.gc);
     }
-    if (polyPtr->outlineGC != None) {
-	Tk_FreeGC(Tk_Display(tkwin), polyPtr->outlineGC);
+    polyPtr->outline.gc = newGC;
+
+    color = polyPtr->fillColor;
+    stipple = polyPtr->fillStipple;
+    if (((TkCanvas *)canvas)->currentItemPtr == itemPtr) {
+	if (polyPtr->activeFillColor!=NULL) {
+	    color = polyPtr->activeFillColor;
+	}
+	if (polyPtr->activeFillStipple!=None) {
+	    stipple = polyPtr->activeFillStipple;
+	}
+    } else if (state==TK_STATE_DISABLED) {
+	if (polyPtr->disabledFillColor!=NULL) {
+	    color = polyPtr->disabledFillColor;
+	}
+	if (polyPtr->disabledFillStipple!=None) {
+	    stipple = polyPtr->disabledFillStipple;
+	}
     }
-    polyPtr->outlineGC = newGC;
 
-    if (polyPtr->fillColor == NULL) {
+    if (color == NULL) {
 	newGC = None;
     } else {
-	gcValues.foreground = polyPtr->fillColor->pixel;
+	gcValues.foreground = color->pixel;
 	mask = GCForeground;
-	if (polyPtr->fillStipple != None) {
-	    gcValues.stipple = polyPtr->fillStipple;
+	if (stipple != None) {
+	    gcValues.stipple = stipple;
 	    gcValues.fill_style = FillStippled;
 	    mask |= GCStipple|GCFillStyle;
 	}
@@ -437,20 +571,27 @@ DeletePolygon(canvas, itemPtr, display)
 {
     PolygonItem *polyPtr = (PolygonItem *) itemPtr;
 
+    Tk_DeleteOutline(display,&(polyPtr->outline));
     if (polyPtr->coordPtr != NULL) {
 	ckfree((char *) polyPtr->coordPtr);
     }
     if (polyPtr->fillColor != NULL) {
 	Tk_FreeColor(polyPtr->fillColor);
     }
+    if (polyPtr->activeFillColor != NULL) {
+	Tk_FreeColor(polyPtr->activeFillColor);
+    }
+    if (polyPtr->disabledFillColor != NULL) {
+	Tk_FreeColor(polyPtr->disabledFillColor);
+    }
     if (polyPtr->fillStipple != None) {
 	Tk_FreeBitmap(display, polyPtr->fillStipple);
     }
-    if (polyPtr->outlineColor != NULL) {
-	Tk_FreeColor(polyPtr->outlineColor);
+    if (polyPtr->activeFillStipple != None) {
+	Tk_FreeBitmap(display, polyPtr->activeFillStipple);
     }
-    if (polyPtr->outlineGC != None) {
-	Tk_FreeGC(display, polyPtr->outlineGC);
+    if (polyPtr->disabledFillStipple != None) {
+	Tk_FreeBitmap(display, polyPtr->disabledFillStipple);
     }
     if (polyPtr->fillGC != None) {
 	Tk_FreeGC(display, polyPtr->fillGC);
@@ -483,27 +624,159 @@ ComputePolygonBbox(canvas, polyPtr)
 {
     double *coordPtr;
     int i;
+    double width;
+    Tk_State state = polyPtr->header.state;
+    Tk_TSOffset *tsoffset;
+
+    if(state == TK_STATE_NULL) {
+	state = ((TkCanvas *)canvas)->canvas_state;
+    }
+    width = polyPtr->outline.width;
+    if (polyPtr->coordPtr == NULL || (polyPtr->numPoints < 1) || (state==TK_STATE_HIDDEN)) {
+	polyPtr->header.x1 = polyPtr->header.x2 =
+	polyPtr->header.y1 = polyPtr->header.y2 = -1;
+	return;
+    }
+    if (((TkCanvas *)canvas)->currentItemPtr == (Tk_Item *)polyPtr) {
+	if (polyPtr->outline.activeWidth>width) {
+	    width = polyPtr->outline.activeWidth;
+	}
+    } else if (state==TK_STATE_DISABLED) {
+	if (polyPtr->outline.disabledWidth>0.0) {
+	    width = polyPtr->outline.disabledWidth;
+	}
+    }
 
     coordPtr = polyPtr->coordPtr;
     polyPtr->header.x1 = polyPtr->header.x2 = (int) *coordPtr;
     polyPtr->header.y1 = polyPtr->header.y2 = (int) coordPtr[1];
 
-    for (i = 1, coordPtr = polyPtr->coordPtr+2; i < polyPtr->numPoints;
+    /*
+     * Compute the bounding box of all the points in the polygon,
+     * then expand in all directions by the outline's width to take
+     * care of butting or rounded corners and projecting or
+     * rounded caps.  This expansion is an overestimate (worst-case
+     * is square root of two over two) but it's simple.  Don't do
+     * anything special for curves.  This causes an additional
+     * overestimate in the bounding box, but is faster.
+     */
+
+    for (i = 1, coordPtr = polyPtr->coordPtr+2; i < polyPtr->numPoints-1;
 	    i++, coordPtr += 2) {
 	TkIncludePoint((Tk_Item *) polyPtr, coordPtr);
     }
 
+    tsoffset = &polyPtr->tsoffset;
+    if (tsoffset->flags & TK_OFFSET_INDEX) {
+	int index = tsoffset->flags & ~TK_OFFSET_INDEX;
+	if (tsoffset->flags == INT_MAX) {
+	    index = (polyPtr->numPoints - polyPtr->autoClosed) * 2;
+	    if (index < 0) {
+		index = 0;
+	    }
+	}
+	index %= (polyPtr->numPoints - polyPtr->autoClosed) * 2;
+	if (index <0) {
+	    index += (polyPtr->numPoints - polyPtr->autoClosed) * 2;
+	}
+ 	tsoffset->xoffset = (int) (polyPtr->coordPtr[index] + 0.5);
+	tsoffset->yoffset = (int) (polyPtr->coordPtr[index+1] + 0.5);
+    } else {
+	if (tsoffset->flags & TK_OFFSET_LEFT) {
+	    tsoffset->xoffset = polyPtr->header.x1;
+	} else if (tsoffset->flags & TK_OFFSET_CENTER) {
+	    tsoffset->xoffset = (polyPtr->header.x1 + polyPtr->header.x2)/2;
+	} else if (tsoffset->flags & TK_OFFSET_RIGHT) {
+	    tsoffset->xoffset = polyPtr->header.x2;
+	}
+	if (tsoffset->flags & TK_OFFSET_TOP) {
+	    tsoffset->yoffset = polyPtr->header.y1;
+	} else if (tsoffset->flags & TK_OFFSET_MIDDLE) {
+	    tsoffset->yoffset = (polyPtr->header.y1 + polyPtr->header.y2)/2;
+	} else if (tsoffset->flags & TK_OFFSET_BOTTOM) {
+	    tsoffset->yoffset = polyPtr->header.y2;
+	}
+    }
+
+    if (polyPtr->outline.gc != None) {
+	tsoffset = &polyPtr->outline.tsoffset;
+	if (tsoffset) {
+	    if (tsoffset->flags & TK_OFFSET_INDEX) {
+		int index = tsoffset->flags & ~TK_OFFSET_INDEX;
+		if (tsoffset->flags == INT_MAX) {
+		    index = (polyPtr->numPoints - 1) * 2;
+		}
+		index %= (polyPtr->numPoints - 1) * 2;
+		if (index <0) {
+		    index += (polyPtr->numPoints - 1) * 2;
+		}
+		tsoffset->xoffset = (int) (polyPtr->coordPtr[index] + 0.5);
+		tsoffset->yoffset = (int) (polyPtr->coordPtr[index+1] + 0.5);
+	    } else {
+		if (tsoffset->flags & TK_OFFSET_LEFT) {
+		    tsoffset->xoffset = polyPtr->header.x1;
+		} else if (tsoffset->flags & TK_OFFSET_CENTER) {
+		    tsoffset->xoffset = (polyPtr->header.x1 + polyPtr->header.x2)/2;
+		} else if (tsoffset->flags & TK_OFFSET_RIGHT) {
+		    tsoffset->xoffset = polyPtr->header.x2;
+		}
+		if (tsoffset->flags & TK_OFFSET_TOP) {
+		    tsoffset->yoffset = polyPtr->header.y1;
+		} else if (tsoffset->flags & TK_OFFSET_MIDDLE) {
+		    tsoffset->yoffset = (polyPtr->header.y1 + polyPtr->header.y2)/2;
+		} else if (tsoffset->flags & TK_OFFSET_BOTTOM) {
+		    tsoffset->yoffset = polyPtr->header.y2;
+		}
+	    }
+	}
+
+	i = (int) ((width+1.5)/2.0);
+	polyPtr->header.x1 -= i;
+	polyPtr->header.x2 += i;
+	polyPtr->header.y1 -= i;
+	polyPtr->header.y2 += i;
+
+	/*
+	 * For mitered lines, make a second pass through all the points.
+	 * Compute the locations of the two miter vertex points and add
+	 * those into the bounding box.
+	 */
+
+	if (polyPtr->joinStyle == JoinMiter) {
+	    double miter[4];
+	    int j;
+	    coordPtr = polyPtr->coordPtr;
+	    if (polyPtr->numPoints>3) {
+		if (TkGetMiterPoints(coordPtr+2*(polyPtr->numPoints-2),
+			coordPtr, coordPtr+2, width,
+			miter, miter+2)) {
+		    for (j = 0; j < 4; j += 2) {
+			TkIncludePoint((Tk_Item *) polyPtr, miter+j);
+		    }
+		}
+	     }
+	    for (i = polyPtr->numPoints ; i >= 3;
+		    i--, coordPtr += 2) {
+    
+		if (TkGetMiterPoints(coordPtr, coordPtr+2, coordPtr+4,
+			width, miter, miter+2)) {
+		    for (j = 0; j < 4; j += 2) {
+			TkIncludePoint((Tk_Item *) polyPtr, miter+j);
+		    }
+		}
+	    }
+	}
+    }
+
     /*
-     * Expand bounding box in all directions to account for the outline,
-     * which can stick out beyond the polygon.  Add one extra pixel of
-     * fudge, just in case X rounds differently than we do.
+     * Add one more pixel of fudge factor just to be safe (e.g.
+     * X may round differently than we do).
      */
 
-    i = (polyPtr->width+1)/2 + 1;
-    polyPtr->header.x1 -= i;
-    polyPtr->header.x2 += i;
-    polyPtr->header.y1 -= i;
-    polyPtr->header.y2 += i;
+    polyPtr->header.x1 -= 1;
+    polyPtr->header.x2 += 1;
+    polyPtr->header.y1 -= 1;
+    polyPtr->header.y2 += 1;
 }
 
 /*
@@ -567,7 +840,7 @@ TkFillPolygon(canvas, coordPtr, numPoints, display, drawable, gc, outlineGC)
      * allocated.
      */
 
-    if (gc != None) {
+    if (gc != None && numPoints>3) {
 	XFillPolygon(display, drawable, gc, pointPtr, numPoints, Complex,
 		CoordModeOrigin);
     }
@@ -609,24 +882,80 @@ DisplayPolygon(canvas, itemPtr, display, drawable, x, y, width, height)
 					 * must be redisplayed (not used). */
 {
     PolygonItem *polyPtr = (PolygonItem *) itemPtr;
+    Tk_State state = itemPtr->state;
+    Pixmap stipple = polyPtr->fillStipple;
+    double linewidth = polyPtr->outline.width;
 
-    if ((polyPtr->fillGC == None) && (polyPtr->outlineGC == None)) {
+    if (((polyPtr->fillGC == None) && (polyPtr->outline.gc == None)) ||
+	    (polyPtr->numPoints < 1) ||
+	    (polyPtr->numPoints < 3 && polyPtr->outline.gc == None)) {
 	return;
     }
 
+    if(state == TK_STATE_NULL) {
+	state = ((TkCanvas *)canvas)->canvas_state;
+    }
+    if (((TkCanvas *)canvas)->currentItemPtr == itemPtr) {
+	if (polyPtr->outline.activeWidth>linewidth) {
+	    linewidth = polyPtr->outline.activeWidth;
+	}
+	if (polyPtr->activeFillStipple != None) {
+	    stipple = polyPtr->activeFillStipple;
+	}
+    } else if (state==TK_STATE_DISABLED) {
+	if (polyPtr->outline.disabledWidth>0.0) {
+	    linewidth = polyPtr->outline.disabledWidth;
+	}
+	if (polyPtr->disabledFillStipple != None) {
+	    stipple = polyPtr->disabledFillStipple;
+	}
+    }
     /*
      * If we're stippling then modify the stipple offset in the GC.  Be
      * sure to reset the offset when done, since the GC is supposed to be
      * read-only.
      */
 
-    if ((polyPtr->fillStipple != None) && (polyPtr->fillGC != None)) {
-	Tk_CanvasSetStippleOrigin(canvas, polyPtr->fillGC);
+    if (stipple != None) {
+	Tk_TSOffset *tsoffset = &polyPtr->tsoffset;
+	int w=0; int h=0;
+	int flags = tsoffset->flags;
+	if (!(flags & TK_OFFSET_INDEX) && (flags & (TK_OFFSET_CENTER|TK_OFFSET_MIDDLE))) {
+	    Tk_SizeOfBitmap(display, stipple, &w, &h);
+	    if (flags & TK_OFFSET_CENTER) {
+		w /= 2;
+	    } else {
+		w = 0;
+	    }
+	    if (flags & TK_OFFSET_MIDDLE) {
+		h /= 2;
+	    } else {
+		h = 0;
+	    }
+	}
+	tsoffset->xoffset -= w;
+	tsoffset->yoffset -= h;
+	Tk_CanvasSetOffset(canvas, polyPtr->fillGC, tsoffset);
+	tsoffset->xoffset += w;
+	tsoffset->yoffset += h;
     }
+    Tk_ChangeOutlineGC(canvas, itemPtr, &(polyPtr->outline));
 
-    if (!polyPtr->smooth) {
+    if(polyPtr->numPoints < 3) {
+	short x,y;
+	int intLineWidth = (int) (linewidth + 0.5);
+	if (intLineWidth < 1) {
+	    intLineWidth = 1;
+	}
+	Tk_CanvasDrawableCoords(canvas, polyPtr->coordPtr[0],
+		    polyPtr->coordPtr[1], &x,&y);
+	XFillArc(display, drawable, polyPtr->outline.gc,
+		x - intLineWidth/2, y - intLineWidth/2,
+		(unsigned int)intLineWidth+1, (unsigned int)intLineWidth+1,
+		0, 64*360);
+    } else if (!polyPtr->smooth || polyPtr->numPoints < 4) {
 	TkFillPolygon(canvas, polyPtr->coordPtr, polyPtr->numPoints,
-		display, drawable, polyPtr->fillGC, polyPtr->outlineGC);
+		    display, drawable, polyPtr->fillGC, polyPtr->outline.gc);
     } else {
 	int numPoints;
 	XPoint staticPoints[MAX_STATIC_POINTS];
@@ -637,29 +966,32 @@ DisplayPolygon(canvas, itemPtr, display, drawable, x, y, width, height)
 	 * spline points rather than the original points.
 	 */
 
-	numPoints = 1 + polyPtr->numPoints*polyPtr->splineSteps;
+	numPoints = polyPtr->smooth->coordProc(canvas, (double *) NULL,
+		polyPtr->numPoints, polyPtr->splineSteps, (XPoint *) NULL,
+		(double *) NULL);
 	if (numPoints <= MAX_STATIC_POINTS) {
 	    pointPtr = staticPoints;
 	} else {
 	    pointPtr = (XPoint *) ckalloc((unsigned)
 		    (numPoints * sizeof(XPoint)));
 	}
-	numPoints = TkMakeBezierCurve(canvas, polyPtr->coordPtr,
+	numPoints = polyPtr->smooth->coordProc(canvas, polyPtr->coordPtr,
 		polyPtr->numPoints, polyPtr->splineSteps, pointPtr,
 		(double *) NULL);
 	if (polyPtr->fillGC != None) {
 	    XFillPolygon(display, drawable, polyPtr->fillGC, pointPtr,
 		    numPoints, Complex, CoordModeOrigin);
 	}
-	if (polyPtr->outlineGC != None) {
-	    XDrawLines(display, drawable, polyPtr->outlineGC, pointPtr,
+	if (polyPtr->outline.gc != None) {
+	    XDrawLines(display, drawable, polyPtr->outline.gc, pointPtr,
 		    numPoints, CoordModeOrigin);
 	}
 	if (pointPtr != staticPoints) {
 	    ckfree((char *) pointPtr);
 	}
     }
-    if ((polyPtr->fillStipple != None) && (polyPtr->fillGC != None)) {
+    Tk_ResetOutlineGC(canvas, itemPtr, &(polyPtr->outline));
+    if (stipple != None) {
 	XSetTSOrigin(display, polyPtr->fillGC, 0, 0);
     }
 }
@@ -667,6 +999,203 @@ DisplayPolygon(canvas, itemPtr, display, drawable, x, y, width, height)
 /*
  *--------------------------------------------------------------
  *
+ * PolygonInsert --
+ *
+ *	Insert coords into a polugon item at a given index.
+ *
+ * Results:
+ *	None.
+ *
+ * Side effects:
+ *	The coords in the given item is modified.
+ *
+ *--------------------------------------------------------------
+ */
+
+static void
+PolygonInsert(canvas, itemPtr, beforeThis, obj)
+    Tk_Canvas canvas;		/* Canvas containing text item. */
+    Tk_Item *itemPtr;		/* Line item to be modified. */
+    int beforeThis;		/* Index before which new coordinates
+				 * are to be inserted. */
+    Tcl_Obj *obj;		/* New coordinates to be inserted. */
+{
+    PolygonItem *polyPtr = (PolygonItem *) itemPtr;
+    int length, argc, i;
+    Tcl_Obj **objv;
+    double *new;
+    Tk_State state = itemPtr->state;
+
+    if (state == TK_STATE_NULL) {
+	state = ((TkCanvas *)canvas)->canvas_state;
+    }
+
+    if (!obj || (Tcl_ListObjGetElements((Tcl_Interp *) NULL, obj, &argc, &objv) != TCL_OK)
+	    || !argc || argc&1) {
+	return;
+    }
+    length = 2*(polyPtr->numPoints - polyPtr->autoClosed);
+    while(beforeThis>length) beforeThis-=length;
+    while(beforeThis<0) beforeThis+=length;
+    new = (double *) ckalloc((unsigned)(sizeof(double) * (length + 2 + argc)));
+    for (i=0; i<beforeThis; i++) {
+	new[i] = polyPtr->coordPtr[i];
+    }
+    for (i=0; i<argc; i++) {
+	if (Tcl_GetDoubleFromObj((Tcl_Interp *) NULL,objv[i],
+		new+(i+beforeThis))!=TCL_OK) {
+	    ckfree((char *) new);
+	    return;
+	}
+    }
+
+    for(i=beforeThis; i<length; i++) {
+	new[i+argc] = polyPtr->coordPtr[i];
+    }
+    if(polyPtr->coordPtr) ckfree((char *) polyPtr->coordPtr);
+    length+=argc;
+    polyPtr->coordPtr = new;
+    polyPtr->numPoints = (length/2) + polyPtr->autoClosed;
+
+    /*
+     * Close the polygon if it isn't already closed, or remove autoclosing
+     * if the user's coordinates are now closed.
+     */
+
+    if (polyPtr->autoClosed) {
+	if ((new[length-2] == new[0]) && (new[length-1] == new[1])) {
+	    polyPtr->autoClosed = 0;
+	    polyPtr->numPoints--;
+	}
+    }
+    else {
+	if ((new[length-2] != new[0]) || (new[length-1] != new[1])) {
+	    polyPtr->autoClosed = 1;
+	    polyPtr->numPoints++;
+	}
+    }
+
+    new[length] = new[0];
+    new[length+1] = new[1];
+    if (((length-argc)>3) && (state != TK_STATE_HIDDEN)) {
+	/*
+	 * This is some optimizing code that will result that only the part
+	 * of the polygon that changed (and the objects that are overlapping
+	 * with that part) need to be redrawn. A special flag is set that
+	 * instructs the general canvas code not to redraw the whole
+	 * object. If this flag is not set, the canvas will do the redrawing,
+	 * otherwise I have to do it here.
+	 */
+    	double width;
+	int j;
+	itemPtr->redraw_flags |= TK_ITEM_DONT_REDRAW;
+
+	/*
+	 * The header elements that normally are used for the
+	 * bounding box, are now used to calculate the bounding
+	 * box for only the part that has to be redrawn. That
+	 * doesn't matter, because afterwards the bounding
+	 * box has to be re-calculated anyway.
+	 */
+
+	itemPtr->x1 = itemPtr->x2 = (int) polyPtr->coordPtr[beforeThis];
+	itemPtr->y1 = itemPtr->y2 = (int) polyPtr->coordPtr[beforeThis+1];
+	beforeThis-=2; argc+=4;
+	if(polyPtr->smooth) {
+	    beforeThis-=2; argc+=4;
+	} /* be carefull; beforeThis could now be negative */
+	for(i=beforeThis; i<beforeThis+argc; i+=2) {
+		j=i;
+		if(j<0) j+=length;
+		if(j>=length) j-=length;
+		TkIncludePoint(itemPtr, polyPtr->coordPtr+j);
+	}
+	width = polyPtr->outline.width;
+	if (((TkCanvas *)canvas)->currentItemPtr == itemPtr) {
+		if (polyPtr->outline.activeWidth>width) {
+		    width = polyPtr->outline.activeWidth;
+		}
+	} else if (state==TK_STATE_DISABLED) {
+		if (polyPtr->outline.disabledWidth>0.0) {
+		    width = polyPtr->outline.disabledWidth;
+		}
+	}
+	itemPtr->x1 -= (int) width; itemPtr->y1 -= (int) width;
+	itemPtr->x2 += (int) width; itemPtr->y2 += (int) width;
+	Tk_CanvasEventuallyRedraw(canvas,
+		itemPtr->x1, itemPtr->y1,
+		itemPtr->x2, itemPtr->y2);
+    }
+
+    ComputePolygonBbox(canvas, polyPtr);
+}
+
+/*
+ *--------------------------------------------------------------
+ *
+ * PolygonDeleteCoords --
+ *
+ *	Delete one or more coordinates from a polygon item.
+ *
+ * Results:
+ *	None.
+ *
+ * Side effects:
+ *	Characters between "first" and "last", inclusive, get
+ *	deleted from itemPtr.
+ *
+ *--------------------------------------------------------------
+ */
+
+static void
+PolygonDeleteCoords(canvas, itemPtr, first, last)
+    Tk_Canvas canvas;		/* Canvas containing itemPtr. */
+    Tk_Item *itemPtr;		/* Item in which to delete characters. */
+    int first;			/* Index of first character to delete. */
+    int last;			/* Index of last character to delete. */
+{
+    PolygonItem *polyPtr = (PolygonItem *) itemPtr;
+    int count, i;
+    int length = 2*(polyPtr->numPoints - polyPtr->autoClosed);
+
+    while(first>=length) first-=length;
+    while(first<0)	 first+=length;
+    while(last>=length)	 last-=length;
+    while(last<0)	 last+=length;
+
+    first &= -2;
+    last &= -2;
+
+    count = last + 2 - first;
+    if(count<=0) count +=length;
+
+    if(count >= length) {
+	polyPtr->numPoints = 0;
+	if(polyPtr->coordPtr != NULL) {
+	    ckfree((char *) polyPtr->coordPtr);
+	}
+	ComputePolygonBbox(canvas, polyPtr);
+	return;
+    }
+
+    if(last>=first) {
+	for(i=last+2; i<length; i++) {
+	    polyPtr->coordPtr[i-count] = polyPtr->coordPtr[i];
+	}
+    } else {
+	for(i=last; i<=first; i++) {
+	    polyPtr->coordPtr[i-last] = polyPtr->coordPtr[i];
+	}
+    }
+    polyPtr->coordPtr[length-count] = polyPtr->coordPtr[0];
+    polyPtr->coordPtr[length-count+1] = polyPtr->coordPtr[1];
+    polyPtr->numPoints -= count/2;
+    ComputePolygonBbox(canvas, polyPtr);
+}
+
+/*
+ *--------------------------------------------------------------
+ *
  * PolygonToPoint --
  *
  *	Computes the distance from a given point to a given
@@ -692,41 +1221,169 @@ PolygonToPoint(canvas, itemPtr, pointPtr)
     double *pointPtr;		/* Pointer to x and y coordinates. */
 {
     PolygonItem *polyPtr = (PolygonItem *) itemPtr;
-    double *coordPtr, distance;
+    double *coordPtr, *polyPoints;
     double staticSpace[2*MAX_STATIC_POINTS];
-    int numPoints;
+    double poly[10];
+    double radius;
+    double bestDist, dist;
+    int numPoints, count;
+    int changedMiterToBevel;	/* Non-zero means that a mitered corner
+				 * had to be treated as beveled after all
+				 * because the angle was < 11 degrees. */
+    double width;
+    Tk_State state = itemPtr->state;
+
+    bestDist = 1.0e36;
+
+    if(state == TK_STATE_NULL) {
+	state = ((TkCanvas *)canvas)->canvas_state;
+    }
+    width = polyPtr->outline.width;
+    if (((TkCanvas *)canvas)->currentItemPtr == itemPtr) {
+	if (polyPtr->outline.activeWidth>width) {
+	    width = polyPtr->outline.activeWidth;
+	}
+    } else if (state==TK_STATE_DISABLED) {
+	if (polyPtr->outline.disabledWidth>0.0) {
+	    width = polyPtr->outline.disabledWidth;
+	}
+    }
+    radius = width/2.0;
 
-    if (!polyPtr->smooth) {
-	distance = TkPolygonToPoint(polyPtr->coordPtr, polyPtr->numPoints,
-		pointPtr);
-    } else {
-	/*
-	 * Smoothed polygon.  Generate a new set of points and use them
-	 * for comparison.
-	 */
-    
-	numPoints = 1 + polyPtr->numPoints*polyPtr->splineSteps;
+    /*
+     * Handle smoothed polygons by generating an expanded set of points
+     * against which to do the check.
+     */
+
+    if ((polyPtr->smooth) && (polyPtr->numPoints>2)) {
+	numPoints = polyPtr->smooth->coordProc(canvas, (double *) NULL,
+		polyPtr->numPoints, polyPtr->splineSteps, (XPoint *) NULL,
+		(double *) NULL);
 	if (numPoints <= MAX_STATIC_POINTS) {
-	    coordPtr = staticSpace;
+	    polyPoints = staticSpace;
 	} else {
-	    coordPtr = (double *) ckalloc((unsigned)
+	    polyPoints = (double *) ckalloc((unsigned)
 		    (2*numPoints*sizeof(double)));
 	}
-	numPoints = TkMakeBezierCurve(canvas, polyPtr->coordPtr,
+	numPoints = polyPtr->smooth->coordProc(canvas, polyPtr->coordPtr,
 		polyPtr->numPoints, polyPtr->splineSteps, (XPoint *) NULL,
-		coordPtr);
-	distance = TkPolygonToPoint(coordPtr, numPoints, pointPtr);
-	if (coordPtr != staticSpace) {
-	    ckfree((char *) coordPtr);
+		polyPoints);
+    } else {
+	numPoints = polyPtr->numPoints;
+	polyPoints = polyPtr->coordPtr;
+    }
+
+    bestDist = TkPolygonToPoint(polyPoints, numPoints, pointPtr);
+    if (bestDist<=0.0) {
+	goto donepoint;
+    }
+    if ((polyPtr->outline.gc != None) && (polyPtr->joinStyle == JoinRound)) {
+	dist = bestDist - radius;
+	if (dist <= 0.0) {
+	    bestDist = 0.0;
+	    goto donepoint;
+	} else {
+	    bestDist = dist;
 	}
     }
-    if (polyPtr->outlineColor != NULL) {
-	distance -= polyPtr->width/2.0;
-	if (distance < 0) {
-	    distance = 0;
+
+    if ((polyPtr->outline.gc == None) || (width <= 1)) goto donepoint;
+
+    /*
+     * The overall idea is to iterate through all of the edges of
+     * the line, computing a polygon for each edge and testing the
+     * point against that polygon.  In addition, there are additional
+     * tests to deal with rounded joints and caps.
+     */
+
+    changedMiterToBevel = 0;
+    for (count = numPoints, coordPtr = polyPoints; count >= 2;
+	    count--, coordPtr += 2) {
+
+	/*
+	 * If rounding is done around the first point then compute
+	 * the distance between the point and the point.
+	 */
+
+	if (polyPtr->joinStyle == JoinRound) {
+	    dist = hypot(coordPtr[0] - pointPtr[0], coordPtr[1] - pointPtr[1])
+		    - radius;
+	    if (dist <= 0.0) {
+		bestDist = 0.0;
+		goto donepoint;
+	    } else if (dist < bestDist) {
+		bestDist = dist;
+	    }
 	}
+
+	/*
+	 * Compute the polygonal shape corresponding to this edge,
+	 * consisting of two points for the first point of the edge
+	 * and two points for the last point of the edge.
+	 */
+
+	if (count == numPoints) {
+	    TkGetButtPoints(coordPtr+2, coordPtr, (double) width,
+		    0, poly, poly+2);
+	} else if ((polyPtr->joinStyle == JoinMiter) && !changedMiterToBevel) {
+	    poly[0] = poly[6];
+	    poly[1] = poly[7];
+	    poly[2] = poly[4];
+	    poly[3] = poly[5];
+	} else {
+	    TkGetButtPoints(coordPtr+2, coordPtr, (double) width, 0,
+		    poly, poly+2);
+
+	    /*
+	     * If this line uses beveled joints, then check the distance
+	     * to a polygon comprising the last two points of the previous
+	     * polygon and the first two from this polygon;  this checks
+	     * the wedges that fill the mitered joint.
+	     */
+
+	    if ((polyPtr->joinStyle == JoinBevel) || changedMiterToBevel) {
+		poly[8] = poly[0];
+		poly[9] = poly[1];
+		dist = TkPolygonToPoint(poly, 5, pointPtr);
+		if (dist <= 0.0) {
+		    bestDist = 0.0;
+		    goto donepoint;
+		} else if (dist < bestDist) {
+		    bestDist = dist;
+		}
+		changedMiterToBevel = 0;
+	    }
+	}
+	if (count == 2) {
+	    TkGetButtPoints(coordPtr, coordPtr+2, (double) width,
+		    0, poly+4, poly+6);
+	} else if (polyPtr->joinStyle == JoinMiter) {
+	    if (TkGetMiterPoints(coordPtr, coordPtr+2, coordPtr+4,
+		    (double) width, poly+4, poly+6) == 0) {
+		changedMiterToBevel = 1;
+		TkGetButtPoints(coordPtr, coordPtr+2, (double) width,
+			0, poly+4, poly+6);
+	    }
+	} else {
+	    TkGetButtPoints(coordPtr, coordPtr+2, (double) width, 0,
+		    poly+4, poly+6);
+	}
+	poly[8] = poly[0];
+	poly[9] = poly[1];
+	dist = TkPolygonToPoint(poly, 5, pointPtr);
+	if (dist <= 0.0) {
+	    bestDist = 0.0;
+	    goto donepoint;
+	} else if (dist < bestDist) {
+	    bestDist = dist;
+	}
+    }
+
+    donepoint:
+    if ((polyPoints != staticSpace) && polyPoints != polyPtr->coordPtr) {
+	ckfree((char *) polyPoints);
     }
-    return distance;
+    return bestDist;
 }
 
 /*
@@ -759,75 +1416,179 @@ PolygonToArea(canvas, itemPtr, rectPtr)
 				 * area.  */
 {
     PolygonItem *polyPtr = (PolygonItem *) itemPtr;
-    double *coordPtr, rect2[4], halfWidth;
+    double *coordPtr;
     double staticSpace[2*MAX_STATIC_POINTS];
-    int numPoints, result;
+    double *polyPoints, poly[10];
+    double radius;
+    int numPoints, count;
+    int changedMiterToBevel;	/* Non-zero means that a mitered corner
+				 * had to be treated as beveled after all
+				 * because the angle was < 11 degrees. */
+    int inside;			/* Tentative guess about what to return,
+				 * based on all points seen so far:  one
+				 * means everything seen so far was
+				 * inside the area;  -1 means everything
+				 * was outside the area.  0 means overlap
+				 * has been found. */ 
+    double width;
+    Tk_State state = itemPtr->state;
+
+    if(state == TK_STATE_NULL) {
+	state = ((TkCanvas *)canvas)->canvas_state;
+    }
 
+    width = polyPtr->outline.width;
+    if (((TkCanvas *)canvas)->currentItemPtr == itemPtr) {
+	if (polyPtr->outline.activeWidth>width) {
+	    width = polyPtr->outline.activeWidth;
+	}
+    } else if (state==TK_STATE_DISABLED) {
+	if (polyPtr->outline.disabledWidth>0.0) {
+	    width = polyPtr->outline.disabledWidth;
+	}
+    }
+
+    radius = width/2.0;
+    inside = -1;
+
+    if ((state==TK_STATE_HIDDEN) || polyPtr->numPoints<2) {
+	return -1;
+    } else if (polyPtr->numPoints <3) {
+	double oval[4];
+	oval[0] = polyPtr->coordPtr[0]-radius;
+	oval[1] = polyPtr->coordPtr[1]-radius;
+	oval[2] = polyPtr->coordPtr[0]+radius;
+	oval[3] = polyPtr->coordPtr[1]+radius;
+	return TkOvalToArea(oval, rectPtr);
+    }
     /*
      * Handle smoothed polygons by generating an expanded set of points
      * against which to do the check.
      */
 
     if (polyPtr->smooth) {
-	numPoints = 1 + polyPtr->numPoints*polyPtr->splineSteps;
+	numPoints = polyPtr->smooth->coordProc(canvas, (double *) NULL,
+		polyPtr->numPoints, polyPtr->splineSteps, (XPoint *) NULL,
+		(double *) NULL);
 	if (numPoints <= MAX_STATIC_POINTS) {
-	    coordPtr = staticSpace;
+	    polyPoints = staticSpace;
 	} else {
-	    coordPtr = (double *) ckalloc((unsigned)
+	    polyPoints = (double *) ckalloc((unsigned)
 		    (2*numPoints*sizeof(double)));
 	}
-	numPoints = TkMakeBezierCurve(canvas, polyPtr->coordPtr,
+	numPoints = polyPtr->smooth->coordProc(canvas, polyPtr->coordPtr,
 		polyPtr->numPoints, polyPtr->splineSteps, (XPoint *) NULL,
-		coordPtr);
+		polyPoints);
     } else {
 	numPoints = polyPtr->numPoints;
-	coordPtr = polyPtr->coordPtr;
+	polyPoints = polyPtr->coordPtr;
     }
 
-    if (polyPtr->width <= 1) {
-	/*
-	 * The outline of the polygon doesn't stick out, so we can
-	 * do a simple check.
-	 */
-
-	result = TkPolygonToArea(coordPtr, numPoints, rectPtr);
+    if (polyPtr->fillGC != None) {
+	inside = TkPolygonToArea(polyPoints, numPoints, rectPtr);
+	if (inside==0) goto donearea;
     } else {
+	if ((polyPoints[0] >= rectPtr[0])
+		&& (polyPoints[0] <= rectPtr[2])
+		&& (polyPoints[1] >= rectPtr[1])
+		&& (polyPoints[1] <= rectPtr[3])) {
+	    inside = 1;
+	}
+    }
+
+    if (polyPtr->outline.gc == None) goto donearea ;
+
+
+    /*
+     * Iterate through all of the edges of the line, computing a polygon
+     * for each edge and testing the area against that polygon.  In
+     * addition, there are additional tests to deal with rounded joints
+     * and caps.
+     */
+
+    changedMiterToBevel = 0;
+    for (count = numPoints, coordPtr = polyPoints; count >= 2;
+	    count--, coordPtr += 2) {
+ 
 	/*
-	 * The polygon has a wide outline, so the check is more complicated.
-	 * First, check the line segments to see if they overlap the area.
+	 * If rounding is done around the first point of the edge
+	 * then test a circular region around the point with the
+	 * area.
 	 */
 
-	result = TkThickPolyLineToArea(coordPtr, numPoints, 
-	    (double) polyPtr->width, CapRound, JoinRound, rectPtr);
-	if (result >= 0) {
-	    goto done;
+	if (polyPtr->joinStyle == JoinRound) {
+	    poly[0] = coordPtr[0] - radius;
+	    poly[1] = coordPtr[1] - radius;
+	    poly[2] = coordPtr[0] + radius;
+	    poly[3] = coordPtr[1] + radius;
+	    if (TkOvalToArea(poly, rectPtr) != inside) {
+		inside = 0;
+		goto donearea;
+	    }
 	}
 
 	/*
-	 * There is no overlap between the polygon's outline and the
-	 * rectangle.  This means either the rectangle is entirely outside
-	 * the polygon or entirely inside.  To tell the difference,
-	 * see whether the polygon (with 0 outline width) overlaps the
-	 * rectangle bloated by half the outline width.
+	 * Compute the polygonal shape corresponding to this edge,
+	 * consisting of two points for the first point of the edge
+	 * and two points for the last point of the edge.
 	 */
 
-	halfWidth = polyPtr->width/2.0;
-	rect2[0] = rectPtr[0] - halfWidth;
-	rect2[1] = rectPtr[1] - halfWidth;
-	rect2[2] = rectPtr[2] + halfWidth;
-	rect2[3] = rectPtr[3] + halfWidth;
-	if (TkPolygonToArea(coordPtr, numPoints, rect2) == -1) {
-	    result = -1;
+	if (count == numPoints) {
+	    TkGetButtPoints(coordPtr+2, coordPtr, width,
+		    0, poly, poly+2);
+	} else if ((polyPtr->joinStyle == JoinMiter) && !changedMiterToBevel) {
+	    poly[0] = poly[6];
+	    poly[1] = poly[7];
+	    poly[2] = poly[4];
+	    poly[3] = poly[5];
 	} else {
-	    result = 0;
+	    TkGetButtPoints(coordPtr+2, coordPtr, width, 0,
+		    poly, poly+2);
+
+	    /*
+	     * If the last joint was beveled, then also check a
+	     * polygon comprising the last two points of the previous
+	     * polygon and the first two from this polygon;  this checks
+	     * the wedges that fill the beveled joint.
+	     */
+
+	    if ((polyPtr->joinStyle == JoinBevel) || changedMiterToBevel) {
+		poly[8] = poly[0];
+		poly[9] = poly[1];
+		if (TkPolygonToArea(poly, 5, rectPtr) != inside) {
+		    inside = 0;
+		    goto donearea;
+		}
+		changedMiterToBevel = 0;
+	    }
+	}
+	if (count == 2) {
+	    TkGetButtPoints(coordPtr, coordPtr+2, width,
+		    0, poly+4, poly+6);
+	} else if (polyPtr->joinStyle == JoinMiter) {
+	    if (TkGetMiterPoints(coordPtr, coordPtr+2, coordPtr+4,
+		    width, poly+4, poly+6) == 0) {
+		changedMiterToBevel = 1;
+		TkGetButtPoints(coordPtr, coordPtr+2, width,
+			0, poly+4, poly+6);
+	    }
+	} else {
+	    TkGetButtPoints(coordPtr, coordPtr+2, width, 0,
+		    poly+4, poly+6);
+	}
+	poly[8] = poly[0];
+	poly[9] = poly[1];
+	if (TkPolygonToArea(poly, 5, rectPtr) != inside) {
+	    inside = 0;
+	    goto donearea;
 	}
     }
 
-    done:
-    if ((coordPtr != staticSpace) && (coordPtr != polyPtr->coordPtr)) {
-	ckfree((char *) coordPtr);
+    donearea:
+    if ((polyPoints != staticSpace) && (polyPoints != polyPtr->coordPtr)) {
+	ckfree((char *) polyPoints);
     }
-    return result;
+    return inside;
 }
 
 /*
@@ -873,6 +1634,101 @@ ScalePolygon(canvas, itemPtr, originX, originY, scaleX, scaleY)
 /*
  *--------------------------------------------------------------
  *
+ * GetPolygonIndex --
+ *
+ *	Parse an index into a polygon item and return either its value
+ *	or an error.
+ *
+ * Results:
+ *	A standard Tcl result.  If all went well, then *indexPtr is
+ *	filled in with the index (into itemPtr) corresponding to
+ *	string.  Otherwise an error message is left in
+ *	interp->result.
+ *
+ * Side effects:
+ *	None.
+ *
+ *--------------------------------------------------------------
+ */
+
+static int
+GetPolygonIndex(interp, canvas, itemPtr, obj, indexPtr)
+    Tcl_Interp *interp;		/* Used for error reporting. */
+    Tk_Canvas canvas;		/* Canvas containing item. */
+    Tk_Item *itemPtr;		/* Item for which the index is being
+				 * specified. */
+    Tcl_Obj *obj;		/* Specification of a particular coord
+				 * in itemPtr's line. */
+    int *indexPtr;		/* Where to store converted index. */
+{
+    PolygonItem *polyPtr = (PolygonItem *) itemPtr;
+    size_t length;
+    char *string = Tcl_GetStringFromObj(obj, (int *) &length);
+
+    if (string[0] == 'e') {
+	if (strncmp(string, "end", length) == 0) {
+	    *indexPtr = 2*(polyPtr->numPoints - polyPtr->autoClosed);
+	} else {
+	    badIndex:
+
+	    /*
+	     * Some of the paths here leave messages in interp->result,
+	     * so we have to clear it out before storing our own message.
+	     */
+
+	    Tcl_SetResult(interp, (char *) NULL, TCL_STATIC);
+	    Tcl_AppendResult(interp, "bad index \"", string, "\"",
+		    (char *) NULL);
+	    return TCL_ERROR;
+	}
+    } else if (string[0] == '@') {
+	int i;
+	double x ,y, bestDist, dist, *coordPtr;
+	char *end, *p;
+
+	p = string+1;
+	x = strtod(p, &end);
+	if ((end == p) || (*end != ',')) {
+	    goto badIndex;
+	}
+	p = end+1;
+	y = strtod(p, &end);
+	if ((end == p) || (*end != 0)) {
+	    goto badIndex;
+	}
+	bestDist = 1.0e36;
+	coordPtr = polyPtr->coordPtr;
+	*indexPtr = 0;
+	for(i=0; i<(polyPtr->numPoints-1); i++) {
+	    dist = hypot(coordPtr[0] - x, coordPtr[1] - y);
+	    if (dist<bestDist) {
+		bestDist = dist;
+		*indexPtr = 2*i;
+	    }
+	    coordPtr += 2;
+	}
+    } else {
+	int count = 2*(polyPtr->numPoints - polyPtr->autoClosed);
+	if (Tcl_GetIntFromObj(interp, obj, indexPtr) != TCL_OK) {
+	    goto badIndex;
+	}
+	*indexPtr &= -2; /* if odd, make it even */
+	if (count) {
+	    if (*indexPtr > 0) {
+		*indexPtr = ((*indexPtr - 2) % count) + 2;
+	    } else {
+		*indexPtr = -((-(*indexPtr)) % count);
+	    }
+	} else {
+	    *indexPtr = 0;
+	}
+    }
+    return TCL_OK;
+}
+
+/*
+ *--------------------------------------------------------------
+ *
  * TranslatePolygon --
  *
  *	This procedure is called to move a polygon by a given
@@ -941,29 +1797,103 @@ PolygonToPostscript(interp, canvas, itemPtr, prepass)
 					 * final Postscript is being created. */
 {
     PolygonItem *polyPtr = (PolygonItem *) itemPtr;
+    char *style;
+    XColor *color;
+    XColor *fillColor;
+    Pixmap stipple;
+    Pixmap fillStipple;
+    Tk_State state = itemPtr->state;
+    double width;
+
+    if (polyPtr->numPoints<2 || polyPtr->coordPtr==NULL) {
+	return TCL_OK;
+    }
+
+    if(state == TK_STATE_NULL) {
+	state = ((TkCanvas *)canvas)->canvas_state;
+    }
+    width = polyPtr->outline.width;
+    color = polyPtr->outline.color;
+    stipple = polyPtr->fillStipple;
+    fillColor = polyPtr->fillColor;
+    fillStipple = polyPtr->fillStipple;
+    if (((TkCanvas *)canvas)->currentItemPtr == itemPtr) {
+	if (polyPtr->outline.activeWidth>width) {
+	    width = polyPtr->outline.activeWidth;
+	}
+	if (polyPtr->outline.activeColor!=NULL) {
+	    color = polyPtr->outline.activeColor;
+	}
+	if (polyPtr->outline.activeStipple!=None) {
+	    stipple = polyPtr->outline.activeStipple;
+	}
+	if (polyPtr->activeFillColor!=NULL) {
+	    fillColor = polyPtr->activeFillColor;
+	}
+	if (polyPtr->activeFillStipple!=None) {
+	    fillStipple = polyPtr->activeFillStipple;
+	}
+    } else if (state==TK_STATE_DISABLED) {
+	if (polyPtr->outline.disabledWidth>0.0) {
+	    width = polyPtr->outline.disabledWidth;
+	}
+	if (polyPtr->outline.disabledColor!=NULL) {
+	    color = polyPtr->outline.disabledColor;
+	}
+	if (polyPtr->outline.disabledStipple!=None) {
+	    stipple = polyPtr->outline.disabledStipple;
+	}
+	if (polyPtr->disabledFillColor!=NULL) {
+	    fillColor = polyPtr->disabledFillColor;
+	}
+	if (polyPtr->disabledFillStipple!=None) {
+	    fillStipple = polyPtr->disabledFillStipple;
+	}
+    }
+    if (polyPtr->numPoints==2) {
+	char string[128];
+	sprintf(string, "%.15g %.15g translate %.15g %.15g",
+		polyPtr->coordPtr[0], Tk_CanvasPsY(canvas, polyPtr->coordPtr[1]),
+		width/2.0, width/2.0);
+	Tcl_AppendResult(interp, "matrix currentmatrix\n",string,
+		" scale 1 0 moveto 0 0 1 0 360 arc\nsetmatrix\n", (char *) NULL);
+	if (Tk_CanvasPsColor(interp, canvas, color)
+		!= TCL_OK) {
+	    return TCL_ERROR;
+	}
+	if (stipple != None) {
+	    Tcl_AppendResult(interp, "clip ", (char *) NULL);
+	    if (Tk_CanvasPsStipple(interp, canvas, stipple) != TCL_OK) {
+		return TCL_ERROR;
+	    }
+	} else {
+	    Tcl_AppendResult(interp, "fill\n", (char *) NULL);
+	}
+	return TCL_OK;
+    }
 
     /*
      * Fill the area of the polygon.
      */
 
-    if (polyPtr->fillColor != NULL) {
-	if (!polyPtr->smooth) {
+    if (fillColor != NULL && polyPtr->numPoints>3) {
+	if (!polyPtr->smooth || !polyPtr->smooth->postscriptProc) {
 	    Tk_CanvasPsPath(interp, canvas, polyPtr->coordPtr,
 		    polyPtr->numPoints);
 	} else {
-	    TkMakeBezierPostscript(interp, canvas, polyPtr->coordPtr,
-		    polyPtr->numPoints);
+	    polyPtr->smooth->postscriptProc(interp, canvas, polyPtr->coordPtr,
+		    polyPtr->numPoints, polyPtr->splineSteps);
 	}
-	if (Tk_CanvasPsColor(interp, canvas, polyPtr->fillColor) != TCL_OK) {
+	if (Tk_CanvasPsColor(interp, canvas, fillColor) != TCL_OK) {
 	    return TCL_ERROR;
 	}
-	if (polyPtr->fillStipple != None) {
+	if (fillStipple != None) {
 	    Tcl_AppendResult(interp, "eoclip ", (char *) NULL);
-	    if (Tk_CanvasPsStipple(interp, canvas, polyPtr->fillStipple)
+	    if (Tk_CanvasPsStipple(interp, canvas, fillStipple)
 		    != TCL_OK) {
 		return TCL_ERROR;
 	    }
-	    if (polyPtr->outlineColor != NULL) {
+	    if (color != NULL) {
 		Tcl_AppendResult(interp, "grestore gsave\n", (char *) NULL);
 	    }
 	} else {
@@ -975,25 +1905,29 @@ PolygonToPostscript(interp, canvas, itemPtr, prepass)
      * Now draw the outline, if there is one.
      */
 
-    if (polyPtr->outlineColor != NULL) {
-	char string[32 + TCL_INTEGER_SPACE];
+    if (color != NULL) {
 
-	if (!polyPtr->smooth) {
+	if (!polyPtr->smooth || !polyPtr->smooth->postscriptProc) {
 	    Tk_CanvasPsPath(interp, canvas, polyPtr->coordPtr,
 		polyPtr->numPoints);
 	} else {
-	    TkMakeBezierPostscript(interp, canvas, polyPtr->coordPtr,
-		polyPtr->numPoints);
+	    polyPtr->smooth->postscriptProc(interp, canvas, polyPtr->coordPtr,
+		polyPtr->numPoints, polyPtr->splineSteps);
 	}
 
-	sprintf(string, "%d setlinewidth\n", polyPtr->width);
-	Tcl_AppendResult(interp, string,
-		"1 setlinecap\n1 setlinejoin\n", (char *) NULL);
-	if (Tk_CanvasPsColor(interp, canvas, polyPtr->outlineColor)
-		!= TCL_OK) {
+	if (polyPtr->joinStyle == JoinRound) {
+	    style = "1";
+	} else if (polyPtr->joinStyle == JoinBevel) {
+	    style = "2";
+	} else {
+	    style = "0";
+	}
+	Tcl_AppendResult(interp, style," setlinejoin 1 setlinecap\n",
+		(char *) NULL);
+	if (Tk_CanvasPsOutline(canvas, itemPtr,
+		&(polyPtr->outline)) != TCL_OK) {
 	    return TCL_ERROR;
 	}
-	Tcl_AppendResult(interp, "stroke\n", (char *) NULL);
     }
     return TCL_OK;
 }