summaryrefslogtreecommitdiffstats
path: root/doc/text.n
diff options
context:
space:
mode:
Diffstat (limited to 'doc/text.n')
-rw-r--r--doc/text.n115
1 files changed, 107 insertions, 8 deletions
diff --git a/doc/text.n b/doc/text.n
index 976503b..ac7803c 100644
--- a/doc/text.n
+++ b/doc/text.n
@@ -917,6 +917,83 @@ affected.
.PP
See below for the \fIpathName \fBpeer\fR widget command that controls the
creation of peer widgets.
+.SH "ASYNCHRONOUS UPDATE OF LINE HEIGHTS"
+.PP
+In order to maintain a responsive user-experience, the text widget calculates
+lines metrics (line heights in pixels) asynchronously. Because of this, some
+commands of the text widget may return wrong results if the asynchronous
+calculations are not finished at the time of calling. This applies to
+\fIpathName \fBcount -ypixels\fR and \fIpathName \fByview\fR.
+.PP
+Again for performance reasons, it would not be appropriate to let these
+commands always wait for the end of the update calculation each time they are
+called. In most use cases of these commands a more or less inaccurate result
+does not really matter compared to execution speed.
+.PP
+In case accurate result is needed (and if the text widget is managed by a
+geometry manager), one can resort to \fIpathName \fBsync\fR and \fIpathName
+\fBpendingsync\fR to control the synchronization of the view of text widgets.
+.PP
+The \fB<<WidgetViewSync>>\fR virtual event fires when the line heights of the
+text widget becomes obsolete (due to some editing command or configuration
+change), and again when the internal data of the text widget are back in sync
+with the widget view. The detail field (%d substitution) is either true (when
+the widget is in sync) or false (when it is not).
+.PP
+\fIpathName \fBsync\fR, \fIpathName \fBpendingsync\fR and
+\fB<<WidgetViewSync>>\fR apply to each text widget independently of its peers.
+.PP
+Examples of use:
+.CS
+## Example 1:
+# immediately complete line metrics at any cost (GUI unresponsive)
+$w sync
+$w yview moveto $fraction
+
+## Example 2:
+# synchronously wait for up-to-date line metrics (GUI responsive)
+# before executing the scheduled command, but don't block execution flow
+$w sync -command [list $w yview moveto $fraction]
+
+## Example 3:
+# init
+set yud($w) 0
+proc updateaction w {
+\&set ::yud($w) 1
+\&# any other update action here...
+}
+# runtime, synchronously wait for up-to-date line metrics (GUI responsive)
+$w sync -command [list updateaction $w]
+vwait yud($w)
+$w yview moveto $fraction
+
+## Example 4:
+# init
+set todo($w) {}
+proc updateaction w {
+\&foreach cmd $::todo($w) {uplevel #0 $cmd}
+\&set todo($w) {}
+}
+# runtime
+lappend todo($w) [list $w yview moveto $fraction]
+$w sync -command [list updateaction $w]
+
+## Example 5:
+# init
+set todo($w) {}
+bind $w <<WidgetViewSync>> {
+\&if {%d} {
+\&\&foreach cmd $todo(%W) {eval $cmd}
+\&\&set todo(%W) {}
+\&}
+}
+# runtime
+if {![$w pendingsync]} {
+\&$w yview moveto $fraction
+} else {
+\&lappend todo($w) [list $w yview moveto $fraction]
+}
+.CE
.SH "WIDGET COMMAND"
.PP
The \fBtext\fR command creates a new Tcl command whose name is the same as the
@@ -981,7 +1058,9 @@ if the text widget is managed by a geometry manager), then all subsequent
options ensure that any possible out of date information is recalculated.
This currently only has any effect for the \fB\-ypixels\fR count (which, if
\fB\-update\fR is not given, will use the text widget's current cached value
-for each line). The count options are interpreted as follows:
+for each line). This \fB\-update\fR option is obsoleted by \fIpathName
+\fBsync\fR, \fIpathName \fBpendingsync\fR and \fB<<WidgetViewSync>>\fR. The
+count options are interpreted as follows:
.RS
.IP \fB\-chars\fR
count all characters, whether elided or not. Do not count embedded windows or
@@ -1344,13 +1423,16 @@ Returns a list of peers of this widget (this does not include the widget
itself). The order within this list is undefined.
.RE
.TP
-\fIpathName \fBreplace \fIindex1 index2 chars\fR ?\fItagList chars tagList ...\fR?
-.
-Replaces the range of characters between \fIindex1\fR and \fIindex2\fR with
-the given characters and tags. See the section on \fIpathName \fBinsert\fR for
-an explanation of the handling of the \fItagList...\fR arguments, and the
-section on \fIpathName \fBdelete\fR for an explanation of the handling of the
-indices. If \fIindex2\fR corresponds to an index earlier in the text than
+\fIpathName \fBpendingsync\fR
+Returns 1 if the line heights calculations are not up-to-date, 0 otherwise.
+.TP
+\fIpathName \fBreplace\fR \fIindex1 index2 chars\fR ?\fItagList chars tagList ...\fR?
+Replaces the range of characters between \fIindex1\fR and \fIindex2\fR
+with the given characters and tags. See the section on \fIpathName
+\fBinsert\fR for an explanation of the handling of the \fItagList...\fR
+arguments, and the section on \fIpathName
+\fBdelete\fR for an explanation of the handling of the indices. If
+\fIindex2\fR corresponds to an index earlier in the text than
\fIindex1\fR, an error will be generated.
.RS
.PP
@@ -1523,6 +1605,23 @@ the view just enough to make \fIindex\fR visible at the edge of the window.
If \fIindex\fR is far out of view, then the command centers \fIindex\fR in the
window.
.TP
+\fIpathName \fBsync\fR ?\fB-command \fIcommand\fR?
+Controls the synchronization of the view of the text widget.
+.RS
+.TP
+\fIpathName \fBsync\fR
+Immediately brings the line metrics up-to-date by forcing computation of any
+outdated line heights. The command returns immediately if there is no such
+outdated line heights, otherwise it returns only at the end of the computation.
+The command returns an empty string.
+.TP
+\fIpathName \fBsync -command \fIcommand\fR
+Schedules \fIcommand\fR to be executed (by the event loop) exactly once as soon
+as all line heights are up-to-date. If there are no pending line metrics
+calculations, the scheduling is immediate. The command returns the empty
+string. \fBbgerror\fR is called on \fIcommand\fR failure.
+.RE
+.TP
\fIpathName \fBtag \fIoption \fR?\fIarg arg ...\fR?
.
This command is used to manipulate tags. The exact behavior of the command