diff options
Diffstat (limited to 'unix/README')
| -rw-r--r-- | unix/README | 258 |
1 files changed, 139 insertions, 119 deletions
diff --git a/unix/README b/unix/README index cf6d96f..23f4ba5 100644 --- a/unix/README +++ b/unix/README @@ -1,155 +1,175 @@ Tk UNIX README -------------- -This is the directory where you configure, compile, test, and install -UNIX versions of Tk. This directory also contains source files for Tk -that are specific to UNIX. +This is the directory where you configure, compile, test, and install UNIX +versions of Tk. This directory also contains source files for Tk that are +specific to UNIX. The information in this file is maintained at: http://www.tcl.tk/doc/howto/compile.html -For information on platforms where Tcl/Tk is known to compile, along -with any porting notes for getting it to work on those platforms, see: +For information on platforms where Tcl/Tk is known to compile, along with any +porting notes for getting it to work on those platforms, see: http://www.tcl.tk/software/tcltk/platforms.html -The rest of this file contains instructions on how to do this. The -release should compile and run either "out of the box" or with trivial -changes on any UNIX-like system that approximates POSIX, BSD, or System -V. We know that it runs on workstations from Sun, H-P, DEC, IBM, and -SGI, as well as PCs running Linux, BSDI, and SCO UNIX. To compile for -a PC running Windows, see the README file in the directory ../win. To -compile for Mac OS X, see the README file in the directory ../macosx. To -compile for a classic Macintosh, see the README file in the directory ../mac. +The rest of this file contains instructions on how to do this. The release +should compile and run either "out of the box" or with trivial changes on any +UNIX-like system that approximates POSIX, BSD, or System V. We know that it +runs on workstations from Sun, H-P, DEC, IBM, and SGI, as well as PCs running +Linux, BSDI, and SCO UNIX. To compile for a PC running Windows, see the README +file in the directory ../win. To compile for MacOSX, see the README file in +the directory ../macosx. -RCS: @(#) $Id: README,v 1.19.2.3 2007/05/25 16:03:37 dgp Exp $ +RCS: @(#) $Id: README,v 1.27 2008/02/14 15:45:43 dkf Exp $ How To Compile And Install Tk: ------------------------------ (a) Make sure that the Tcl release is present in the directory - ../../tcl<version> (or else use the "--with-tcl" switch described - below). This release of Tk will only work with the equivalently - version Tcl release. Also, be sure that you have configured Tcl before - you configure Tk. + ../../tcl<version> (or else use the "--with-tcl" switch described below). + This release of Tk will only work with the equivalently versioned Tcl + release. Also, be sure that you have configured Tcl before you configure + Tk. -(b) If you have already compiled Tk once in this directory and are now +(b) Check for patches as described in ../README. + +(c) If you have already compiled Tk once in this directory and are now preparing to compile again in the same directory but for a different - platform, type "make distclean" to discard all the configuration - information computed previously. - -(d) Type "./configure". This runs a configuration script created by GNU - autoconf, which configures Tk for your system and creates a - Makefile. The configure script allows you to customize the Tk - configuration for your site; for details on how you can do this, - type "./configure -help" or refer to the autoconf documentation (not - included here). Tk's "configure" script supports the following - special switches in addition to the standard ones: + platform, or if you have applied patches, type "make distclean" to discard + all the configuration information computed previously. + +(d) Type "./configure". This runs a configuration script created by GNU + autoconf, which configures Tk for your system and creates a Makefile. The + configure script allows you to customize the Tk configuration for your + site; for details on how you can do this, type "./configure -help" or + refer to the autoconf documentation (not included here). Tk's "configure" + script supports the following special switches in addition to the standard + ones: + --with-tcl=DIR Specifies the directory containing the Tcl binaries and Tcl's platform-dependent - configuration information. By default - the Tcl directory is assumed to be in the - location given by (a) above. - --enable-threads If this switch is set, Tk will compile - itself with multithreading support. + configuration information. By default the Tcl + directory is assumed to be in the location + given by (a) above. + --with-x=DIR Tells configure where to find an installation + of the X Window System. Not normally needed. + --enable-threads If this switch is set, Tk will compile itself + with multithreading support. --enable-shared If this switch is specified, Tk will compile itself as a shared library if it can figure - out how to do that on this platform. This - is the default on platforms where we know - how to build shared libraries. + out how to do that on this platform. This is + the default on platforms where we know how to + build shared libraries. --disable-shared If this switch is specified, Tk will compile itself as a static library. - --enable-symbols build with debugging symbols By default - standard debugging symbols are used. You - can specify the value "mem" to include + --disable-rpath Turns off use of the rpath link option on + platforms that would otherwise use it. + --enable-symbols Build with debugging symbols. By default + standard debugging symbols are used. You can + specify the value "mem" to include TCL_MEM_DEBUG memory debugging. - --disable-symbols build without debugging symbols - --enable-64bit enable 64bit support (where applicable) - --disable-64bit disable 64bit support (where applicable) - --enable-64bit-vis enable 64bit Sparc VIS support - --disable-64bit-vis disable 64bit Sparc VIS support + --disable-symbols Build without debugging symbols + --enable-64bit Enable 64bit support (where applicable) + --disable-64bit Disable 64bit support (where applicable) + --enable-64bit-vis Enable 64bit Sparc VIS support + --disable-64bit-vis Disable 64bit Sparc VIS support + --disable-xft Disable support for antialiased fonts via the + Freetype/xft library. By default, this is + switched on whenever the configure script can + detect the required libraries. --enable-man-symlinks Use symlinks for linking the manpages that should be reachable under several names. --enable-man-compression=PROG Compress the manpages using PROG. - Mac OS X only: - --enable-framework package Tk as a framework. - --disable-corefoundation disable use of CoreFoundation API. - --enable-aqua use Aqua windowingsystem rather than X11, - requires --enable-corefoundation with tcl & tk. - - Note: by default gcc will be used if it can be located on the PATH. - if you want to use cc instead of gcc, set the CC environment variable - to "cc" before running configure. It is not safe to change the Makefile - to use gcc after configure is run. - - Note: be sure to use only absolute path names (those starting with "/") - in the --prefix and --exec-prefix options. - -(e) Type "make". This will create a library archive called - "libtk<version>.a" or "libtk<version>.so" and an interpreter - application called "wish" that allows you to type Tcl commands - interactively or execute script files. - -(f) If the make fails then you'll have to personalize the Makefile - for your site or possibly modify the distribution in other ways. - First check the porting Web page above to see if there are hints - for compiling on your system. If you need to modify Makefile, - there are comments at the beginning of it that describe the things - you might want to change and how to change them. - -(g) Type "make install" to install Tk's binaries and script files in - standard places. You'll need write permission on the installation - directories to do this. The installation directories are - determined by the "configure" script and may be specified with - the --prefix and --exec-prefix options to "configure". See the - Makefile for information on what directories were chosen; you - can override these choices by modifying the "prefix" and - "exec_prefix" variables in the Makefile. - -(h) At this point you can play with Tk by invoking the "wish" - program and typing Tcl commands. However, if you haven't installed - Tk then you'll first need to set your TK_LIBRARY environment - variable to hold the full path name of the "library" subdirectory. - If you haven't installed Tcl either then you'll need to set your - TCL_LIBRARY environment variable as well (see the Tcl README file - for information on this). Note that installed versions of wish, - libtk.a, libtk.so, and the Tk library have a version number in their - names, such as "wish8.4" or "libtk8.4.so"; to use the installed - versions, either specify the version number or create a symbolic - link (e.g. from "wish" to "wish8.4"). + --enable-man-suffix=STRING + Add STRING to the name of each of the manual + pages. If specified without giving STRING, the + suffix will be "tk". + + Mac OS X only: + + --enable-framework Package Tk as a framework. + --disable-corefoundation Disable use of CoreFoundation API. + --enable-aqua Use Aqua windowingsystem rather than X11, + requires --enable-corefoundation with Tcl and + Tk. + + Note: by default gcc will be used if it can be located on the PATH. If you + want to use cc instead of gcc, set the CC environment variable to "cc" + before running configure. It is not safe to change the Makefile to use gcc + after configure is run. + + Note: be sure to use only absolute path names (those starting with "/") in + the --prefix and --exec-prefix options. + +(e) Type "make". This will create a library archive called "libtk<version>.a" + or "libtk<version>.so" and an interpreter application called "wish" that + allows you to type Tcl/Tk commands interactively or execute script files. + It will also create a stub library archive "libtkstub<version>.a" that + developers may link against other C code to produce loadable extensions + that call into Tk's public interface routines. + +(f) If the make fails then you'll have to personalize the Makefile for your + site or possibly modify the distribution in other ways. First check the + porting Web page above to see if there are hints for compiling on your + system. If you need to modify Makefile, there are comments at the + beginning of it that describe the things you might want to change and how + to change them. + +(g) Type "make install" to install Tk's binaries and script files in standard + places. You'll need write permission on the installation directories to do + this. The installation directories are determined by the "configure" + script and may be specified with the --prefix and --exec-prefix options to + "configure". See the Makefile for information on what directories were + chosen. You should not override these choices by modifying the Makefile, + or by copying files post-install. The installed binaries have embedded + within them path values relative to the install directory. If you change + your mind about where Tk should be installed, start this procedure over + again from step (a) so that the path embedded in the binaries agrees with + the install location. + +(h) At this point you can play with Tk by running the installed "wish" + executable, or via the "make shell" target, and typing Tcl/Tk commands at + the interactive prompt. If you have trouble compiling Tk, see the URL noted above about working -platforms. It contains information that people have provided about changes -they had to make to compile Tk in various environments. We're also -interested in hearing how to change the configuration setup so that Tk -compiles on additional platforms "out of the box". +platforms. It contains information that people have provided about changes +they had to make to compile Tk in various environments. We're also interested +in hearing how to change the configuration setup so that Tk compiles on +additional platforms "out of the box". + +Note: Do not specify either of the TCL_LIBRARY and TK_LIBRARY environment +variables in a production installation, as this can cause conflicts between +different versions of the libraries. Instead, the libraries should have the +correct locations of their associated script directories built into them. Test suite ---------- -Tk has a substantial self-test suite, consisting of a set of scripts in -the subdirectory "tests". To run the test suite just type "make test" -in this directory. You should then see a printout of the test files -processed. If any errors occur, you'll see a much more substantial -printout for each error. In order to avoid false error reports, be sure -to run the tests with an empty resource database (e.g., remove your -.Xdefaults file or delete any entries starting with *). Also, don't -try to do anything else with your display or keyboard while the tests -are running, or you may get false violations. See the README file in -the "tests" directory for more information on the test suite. - -If the test suite generates errors, most likely they are due to non- -portable tests that are interacting badly with your system configuration. -We are gradually eliminating the non-portable tests, but this release -includes many new tests so there will probably be some portability -problems. As long as the test suite doesn't core dump, it's probably -safe to conclude that any errors represent portability problems in the -test suite and not fundamental flaws with Tk. +Tk has a substantial self-test suite, consisting of a set of scripts in the +subdirectory "tests". To run the test suite just type "make test" in this +directory. You should then see a printout of the test files processed. If any +errors occur, you'll see a much more substantial printout for each error. In +order to avoid false error reports, be sure to run the tests with an empty +resource database (e.g., remove your .Xdefaults file or delete any entries +starting with *). Also, don't try to do anything else with your display or +keyboard while the tests are running, or you may get false violations. See the +README file in the "tests" directory for more information on the test suite. + +If the test suite generates errors, most likely they are due to non-portable +tests that are interacting badly with your system configuration. We are +gradually eliminating the non-portable tests, but this release includes many +new tests so there will probably be some portability problems. As long as the +test suite doesn't core dump, it's probably safe to conclude that any errors +represent portability problems in the test suite and not fundamental flaws +with Tk. There are also a number of visual tests for things such as screen layout, -Postscript generation, etc. These tests all have to be run by manually -enabling the "userInteraction" constraint when testing, and the results -have to be verified visually.. This can be done with - make test TESTFLAGS="-constraints userInteraction" -Some tests will present a main window with a bunch of menus, which you can -use to select various tests. +Postscript generation, etc. These tests all have to be run by manually +enabling the "userInteraction" constraint when testing, and the results have +to be verified visually. This can be done with: + + make test TESTFLAGS="-constraints userInteraction" + +Some tests will present a main window with a bunch of menus, which you can use +to select various tests. |