diff options
Diffstat (limited to 'unix')
| -rw-r--r-- | unix/tcl.m4 | 1753 |
1 files changed, 1753 insertions, 0 deletions
diff --git a/unix/tcl.m4 b/unix/tcl.m4 new file mode 100644 index 0000000..d00d058 --- /dev/null +++ b/unix/tcl.m4 @@ -0,0 +1,1753 @@ +#------------------------------------------------------------------------ +# SC_PATH_TCLCONFIG -- +# +# Locate the tclConfig.sh file and perform a sanity check on +# the Tcl compile flags +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tcl=... +# +# Defines the following vars: +# TCL_BIN_DIR Full path to the directory containing +# the tclConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN(SC_PATH_TCLCONFIG, [ + # + # Ok, lets find the tcl configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tcl + # + + if test x"${no_tcl}" = x ; then + # we reset no_tcl in case something fails here + no_tcl=true + AC_ARG_WITH(tcl, [ --with-tcl directory containing tcl configuration (tclConfig.sh)], with_tclconfig=${withval}) + AC_MSG_CHECKING([for Tcl configuration]) + AC_CACHE_VAL(ac_cv_c_tclconfig,[ + + # First check to see if --with-tclconfig was specified. + if test x"${with_tclconfig}" != x ; then + if test -f "${with_tclconfig}/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)` + else + AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) + fi + fi + + # then check for a private Tcl installation + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ../tcl \ + `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tcl \ + `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tcl \ + `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i; pwd)` + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tcliconfig}" = x ; then + for i in \ + ${srcdir}/../tcl \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tclconfig}" = x ; then + TCL_BIN_DIR="# no Tcl configs found" + AC_MSG_WARN(Can't find Tcl configuration definitions) + exit 0 + else + no_tcl= + TCL_BIN_DIR=${ac_cv_c_tclconfig} + AC_MSG_RESULT(found $TCL_BIN_DIR/tclConfig.sh) + fi + fi +]) + +#------------------------------------------------------------------------ +# SC_PATH_TKCONFIG -- +# +# Locate the tkConfig.sh file +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tk=... +# +# Defines the following vars: +# TK_BIN_DIR Full path to the directory containing +# the tkConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN(SC_PATH_TKCONFIG, [ + # + # Ok, lets find the tk configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tk + # + + if test x"${no_tk}" = x ; then + # we reset no_tk in case something fails here + no_tk=true + AC_ARG_WITH(tk, [ --with-tk directory containing tk configuration (tkConfig.sh)], with_tkconfig=${withval}) + AC_MSG_CHECKING([for Tk configuration]) + AC_CACHE_VAL(ac_cv_c_tkconfig,[ + + # First check to see if --with-tkconfig was specified. + if test x"${with_tkconfig}" != x ; then + if test -f "${with_tkconfig}/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)` + else + AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) + fi + fi + + # then check for a private Tk library + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ../tk \ + `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tk \ + `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tk \ + `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + # check in a few common install locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i; pwd)` + break + fi + done + fi + # check in a few other private locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ${srcdir}/../tk \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + ]) + if test x"${ac_cv_c_tkconfig}" = x ; then + TK_BIN_DIR="# no Tk configs found" + AC_MSG_WARN(Can't find Tk configuration definitions) + exit 0 + else + no_tk= + TK_BIN_DIR=${ac_cv_c_tkconfig} + AC_MSG_RESULT(found $TK_BIN_DIR/tkConfig.sh) + fi + fi + +]) + +#------------------------------------------------------------------------ +# SC_LOAD_TCLCONFIG -- +# +# Load the tclConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TCL_BIN_DIR +# +# Results: +# +# Subst the following vars: +# TCL_BIN_DIR +# TCL_SRC_DIR +# TCL_LIB_FILE +# +#------------------------------------------------------------------------ + +AC_DEFUN(SC_LOAD_TCLCONFIG, [ + AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh]) + + if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then + AC_MSG_RESULT([loading]) + . $TCL_BIN_DIR/tclConfig.sh + else + AC_MSG_RESULT([file not found]) + fi + + # + # The eval is required to do the TCL_DBGX substitution in the + # TCL_LIB_FILE variable + # + + eval TCL_LIB_FILE=${TCL_LIB_FILE} + eval TCL_LIB_FLAG=${TCL_LIB_FLAG} + + AC_SUBST(TCL_BIN_DIR) + AC_SUBST(TCL_SRC_DIR) + AC_SUBST(TCL_LIB_FILE) +]) + +#------------------------------------------------------------------------ +# SC_LOAD_TKCONFIG -- +# +# Load the tkConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TK_BIN_DIR +# +# Results: +# +# Sets the following vars that should be in tkConfig.sh: +# TK_BIN_DIR +#------------------------------------------------------------------------ + +AC_DEFUN(SC_LOAD_TKCONFIG, [ + AC_MSG_CHECKING([for existence of $TCLCONFIG]) + + if test -f "$TK_BIN_DIR/tkConfig.sh" ; then + AC_MSG_CHECKING([loading $TK_BIN_DIR/tkConfig.sh]) + . $TK_BIN_DIR/tkConfig.sh + else + AC_MSG_RESULT([could not find $TK_BIN_DIR/tkConfig.sh]) + fi + + AC_SUBST(TK_BIN_DIR) + AC_SUBST(TK_SRC_DIR) + AC_SUBST(TK_LIB_FILE) +]) + +#------------------------------------------------------------------------ +# SC_ENABLE_GCC -- +# +# Allows the use of GCC if available +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-gcc +# +# Sets the following vars: +# CC Command to use for the compiler +#------------------------------------------------------------------------ + +AC_DEFUN(SC_ENABLE_GCC, [ + AC_ARG_ENABLE(gcc, [ --enable-gcc allow use of gcc if available [--disable-gcc]], + [ok=$enableval], [ok=no]) + if test "$ok" = "yes"; then + if test -z "$CC"; then + CC=gcc + fi + AC_PROG_CC + else + CC=${CC-cc} + fi +]) + +#------------------------------------------------------------------------ +# SC_ENABLE_SHARED -- +# +# Allows the building of shared libraries +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-shared=yes|no +# +# Defines the following vars: +# STATIC_BUILD Used for building import/export libraries +# on Windows. +# +# Sets the following vars: +# SHARED_BUILD Value of 1 or 0 +#------------------------------------------------------------------------ + +AC_DEFUN(SC_ENABLE_SHARED, [ + AC_MSG_CHECKING([how to build libraries]) + AC_ARG_ENABLE(shared, + [ --enable-shared build and link with shared libraries [--enable-shared]], + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" ; then + AC_MSG_RESULT([shared]) + SHARED_BUILD=1 + else + AC_MSG_RESULT([static]) + SHARED_BUILD=0 + AC_DEFINE(STATIC_BUILD) + fi +]) + +#------------------------------------------------------------------------ +# SC_ENABLE_THREADS -- +# +# Specify if thread support should be enabled +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-threads +# +# Sets the following vars: +# THREADS_LIBS Thread library(s) +# +# Defines the following vars: +# TCL_THREADS +# _REENTRANT +# _THREAD_SAFE +# +#------------------------------------------------------------------------ + +AC_DEFUN(SC_ENABLE_THREADS, [ + AC_MSG_CHECKING(for building with threads) + AC_ARG_ENABLE(threads, [ --enable-threads build with threads], + [tcl_ok=$enableval], [tcl_ok=no]) + + if test "$tcl_ok" = "yes"; then + AC_MSG_RESULT(yes) + TCL_THREADS=1 + AC_DEFINE(TCL_THREADS) + AC_DEFINE(_REENTRANT) + AC_DEFINE(_THREAD_SAFE) + AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) + if test "$tcl_ok" = "no"; then + # Check a little harder for __pthread_mutex_init in the same + # library, as some systems hide it there until pthread.h is + # defined. We could alternatively do an AC_TRY_COMPILE with + # pthread.h, but that will work with libpthread really doesn't + # exist, like AIX 4.2. [Bug: 4359] + AC_CHECK_LIB(pthread,__pthread_mutex_init,tcl_ok=yes,tcl_ok=no) + fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthread" + else + AC_CHECK_LIB(pthreads,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthreads" + else + AC_CHECK_LIB(c,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) + if test "$tcl_ok" = "no"; then + TCL_THREADS=0 + AC_MSG_WARN("Don t know how to find pthread lib on your system - you must disable thread support or edit the LIBS in the Makefile...") + fi + fi + fi + + # Does the pthread-implementation provide + # 'pthread_attr_setstacksize' ? + + AC_CHECK_FUNCS(pthread_attr_setstacksize) + else + TCL_THREADS=0 + AC_MSG_RESULT([no (default)]) + fi +]) + +#------------------------------------------------------------------------ +# SC_ENABLE_SYMBOLS -- +# +# Specify if debugging symbols should be used +# +# Arguments: +# none +# +# Requires the following vars to be set: +# CFLAGS_DEBUG +# CFLAGS_OPTIMIZE +# LDFLAGS_DEBUG +# LDFLAGS_OPTIMIZE +# +# Results: +# +# Adds the following arguments to configure: +# --enable-symbols +# +# Defines the following vars: +# CFLAGS_DEFAULT Sets to CFLAGS_DEBUG if true +# Sets to CFLAGS_OPTIMIZE if false +# LDFLAGS_DEFAULT Sets to LDFLAGS_DEBUG if true +# Sets to LDFLAGS_OPTIMIZE if false +# DBGX Debug library extension +# +#------------------------------------------------------------------------ + +AC_DEFUN(SC_ENABLE_SYMBOLS, [ + AC_MSG_CHECKING([for build with symbols]) + AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols [--disable-symbols]], [tcl_ok=$enableval], [tcl_ok=no]) + if test "$tcl_ok" = "yes"; then + CFLAGS_DEFAULT="${CFLAGS_DEBUG}" + LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" + DBGX=g + AC_MSG_RESULT([yes]) + else + CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}" + LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" + DBGX="" + AC_MSG_RESULT([no]) + fi +]) + +#-------------------------------------------------------------------- +# SC_CONFIG_CFLAGS +# +# Try to determine the proper flags to pass to the compiler +# for building shared libraries and other such nonsense. +# +# Arguments: +# none +# +# Results: +# +# Defines the following vars: +# +# DL_OBJS - Name of the object file that implements dynamic +# loading for Tcl on this system. +# DL_LIBS - Library file(s) to include in tclsh and other base +# applications in order for the "load" command to work. +# LDFLAGS - Flags to pass to the compiler when linking object +# files into an executable application binary such +# as tclsh. +# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. +# MAKE_LIB - Command to execute to build the Tcl library; +# differs depending on whether or not Tcl is being +# compiled as a shared library. +# SHLIB_CFLAGS - Flags to pass to cc when compiling the components +# of a shared library (may request position-independent +# code, among other things). +# SHLIB_LD - Base command to use for combining object files +# into a shared library. +# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when +# creating shared libraries. This symbol typically +# goes at the end of the "ld" commands that build +# shared libraries. The value of the symbol is +# "${LIBS}" if all of the dependent libraries should +# be specified when creating a shared library. If +# dependent libraries should not be specified (as on +# SunOS 4.x, where they cause the link to fail, or in +# general if Tcl and Tk aren't themselves shared +# libraries), then this symbol has an empty string +# as its value. +# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable +# extensions. An empty string means we don't know how +# to use shared libraries on this platform. +# TCL_LIB_FILE - Name of the file that contains the Tcl library, such +# as libtcl7.8.so or libtcl7.8.a. +# TCL_LIB_SUFFIX -Specifies everything that comes after the "libtcl" +# in the shared library name, using the $VERSION variable +# to put the version in the right place. This is used +# by platforms that need non-standard library names. +# Examples: ${VERSION}.so.1.1 on NetBSD, since it needs +# to have a version after the .so, and ${VERSION}.a +# on AIX, since the Tcl shared library needs to have +# a .a extension whereas shared objects for loadable +# extensions have a .so extension. Defaults to +# ${VERSION}${SHLIB_SUFFIX}. +# TCL_NEEDS_EXP_FILE - +# 1 means that an export file is needed to link to a +# shared library. +# TCL_EXP_FILE - The name of the installed export / import file which +# should be used to link to the Tcl shared library. +# Empty if Tcl is unshared. +# TCL_BUILD_EXP_FILE - +# The name of the built export / import file which +# should be used to link to the Tcl shared library. +# Empty if Tcl is unshared. +# CFLAGS_DEBUG - +# Flags used when running the compiler in debug mode +# CFLAGS_OPTIMIZE - +# Flags used when running the compiler in optimize mode +# +# EXTRA_CFLAGS +# +# Subst's the following vars: +# DL_LIBS +# CFLAGS_DEBUG +# CFLAGS_OPTIMIZE +#-------------------------------------------------------------------- + +AC_DEFUN(SC_CONFIG_CFLAGS, [ + + # Step 0.a: Enable 64 bit support? + + AC_MSG_CHECKING([if 64bit support is requested]) + AC_ARG_ENABLE(64bit,[ --enable-64bit enable 64bit support (where applicable)],,enableval="no") + + if test "$enableval" = "yes"; then + do64bit=yes + else + do64bit=no + fi + AC_MSG_RESULT($do64bit) + + # Step 0.b: Enable Solaris 64 bit VIS support? + + AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) + AC_ARG_ENABLE(64bit-vis,[ --enable-64bit-vis enable 64bit Sparc VIS support],,enableval="no") + + if test "$enableval" = "yes"; then + # Force 64bit on with VIS + do64bit=yes + do64bitVIS=yes + else + do64bitVIS=no + fi + AC_MSG_RESULT($do64bitVIS) + + # Step 1: set the variable "system" to hold the name and version number + # for the system. This can usually be done via the "uname" command, but + # there are a few systems, like Next, where this doesn't work. + + AC_MSG_CHECKING([system version (for dynamic loading)]) + if test -f /usr/lib/NextStep/software_version; then + system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` + else + system=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + AC_MSG_RESULT([unknown (can't find uname command)]) + system=unknown + else + # Special check for weird MP-RAS system (uname returns weird + # results, and the version is kept in special file). + + if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then + system=MP-RAS-`awk '{print $3}' /etc/.relid'` + fi + if test "`uname -s`" = "AIX" ; then + system=AIX-`uname -v`.`uname -r` + fi + AC_MSG_RESULT($system) + fi + fi + + AC_MSG_CHECKING([if gcc is being used]) + if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then + using_gcc="yes" + else + using_gcc="no" + fi + + AC_MSG_RESULT([$using_gcc ($CC)]) + + # Step 2: check for existence of -ldl library. This is needed because + # Linux can use either -ldl or -ldld for dynamic loading. + + AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) + + # Step 3: set configuration options based on system name and version. + + do64bit_ok=no + fullSrcDir=`cd $srcdir; pwd` + EXTRA_CFLAGS="" + TCL_EXPORT_FILE_SUFFIX="" + UNSHARED_LIB_SUFFIX="" + TCL_TRIM_DOTS='`echo ${VERSION} | tr -d .`' + ECHO_VERSION='`echo ${VERSION}`' + TCL_LIB_VERSIONS_OK=ok + CFLAGS_DEBUG=-g + CFLAGS_OPTIMIZE=-O + if test "$using_gcc" = "yes" ; then + CFLAGS_WARNING="-Wall -Wconversion -Wno-implicit-int" + else + CFLAGS_WARNING="" + fi + TCL_NEEDS_EXP_FILE=0 + TCL_BUILD_EXP_FILE="" + TCL_EXP_FILE="" + STLIB_LD="ar cr" + case $system in + AIX-4.[[2-9]]) + if test "${TCL_THREADS}" = "1" -a "$using_gcc" = "no" ; then + # AIX requires the _r compiler when gcc isn't being used + if test "${CC}" != "cc_r" ; then + CC=${CC}_r + fi + AC_MSG_RESULT(Using $CC for compiling with threads) + fi + SHLIB_CFLAGS="" + SHLIB_LD="$fullSrcDir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + TCL_NEEDS_EXP_FILE=1 + TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.exp' + ;; + AIX-*) + if test "${TCL_THREADS}" = "1" -a "$using_gcc" = "no" ; then + # AIX requires the _r compiler when gcc isn't being used + if test "${CC}" != "cc_r" ; then + CC=${CC}_r + fi + AC_MSG_RESULT(Using $CC for compiling with threads) + fi + SHLIB_CFLAGS="" + SHLIB_LD="$fullSrcDir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + LIBOBJS="$LIBOBJS tclLoadAix.o" + DL_LIBS="-lld" + LDFLAGS="" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + TCL_NEEDS_EXP_FILE=1 + TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.exp' + ;; + BSD/OS-2.1*|BSD/OS-3*) + SHLIB_CFLAGS="" + SHLIB_LD="shlicc -r" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + BSD/OS-4.*) + SHLIB_CFLAGS="-export-dynamic -fPIC" + SHLIB_LD="cc -shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="-export-dynamic" + LD_SEARCH_FLAGS="" + ;; + dgux*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*|HP-UX-*.11.*) + SHLIB_SUFFIX=".sl" + AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = yes; then + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + SHLIB_LD_LIBS="" + DL_OBJS="tclLoadShl.o" + DL_LIBS="-ldld" + LDFLAGS="-Wl,-E" + LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + fi + ;; + IRIX-4.*) + SHLIB_CFLAGS="-G 0" + SHLIB_SUFFIX=".a" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="-Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a' + ;; + IRIX-5.*|IRIX-6.*|IRIX64-6.5*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + if test "$using_gcc" = "yes" ; then + EXTRA_CFLAGS="-mabi=n32" + LDFLAGS="-mabi=n32" + else + case $system in + IRIX-6.3) + # Use to build 6.2 compatible binaries on 6.3. + EXTRA_CFLAGS="-n32 -D_OLD_TERMIOS" + ;; + *) + EXTRA_CFLAGS="-n32" + ;; + esac + LDFLAGS="-n32" + fi + ;; + IRIX64-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -32 -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + ;; + Linux*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + + # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings + # when you inline the string and math operations. Turn this off to + # get rid of the warnings. + + CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" + + if test "$have_dl" = yes; then + SHLIB_LD="${CC} -shared" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="-rdynamic" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + else + AC_CHECK_HEADER(dld.h, [ + SHLIB_LD="ld -shared" + DL_OBJS="tclLoadDld.o" + DL_LIBS="-ldld" + LDFLAGS="" + LD_SEARCH_FLAGS=""]) + fi + if test "`uname -m`" = "alpha" ; then + EXTRA_CFLAGS="-mieee" + fi + ;; + MP-RAS-02*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + MP-RAS-*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="-Wl,-Bexport" + LD_SEARCH_FLAGS="" + ;; + NetBSD-*|FreeBSD-[[1-2]].*|OpenBSD-*) + # Not available on all versions: check for include file. + AC_CHECK_HEADER(dlfcn.h, [ + # NetBSD/SPARC needs -fPIC, -fpic will not do. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + AC_MSG_CHECKING(for ELF) + AC_EGREP_CPP(yes, [ +#ifdef __ELF__ + yes +#endif + ], + AC_MSG_RESULT(yes) + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so', + AC_MSG_RESULT(no) + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' + ) + ], [ + SHLIB_CFLAGS="" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".a" + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + ]) + + # FreeBSD doesn't handle version numbers with dots. + + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + FreeBSD-*) + # FreeBSD 3.* and greater have ELF. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="-export-dynamic" + LD_SEARCH_FLAGS="" + ;; + NEXTSTEP-*) + SHLIB_CFLAGS="" + SHLIB_LD="cc -nostdlib -r" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadNext.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + OS/390-*) + CFLAGS_OPTIMIZE="" # Optimizer is buggy + AC_DEFINE(_OE_SOCKETS) # needed in sys/socket.h + ;; + OSF1-1.0|OSF1-1.1|OSF1-1.2) + # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1 + SHLIB_CFLAGS="" + # Hack: make package name same as library name + SHLIB_LD='ld -R -export $@:' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadOSF.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + OSF1-1.*) + # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -shared" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + OSF1-V*) + # Digital OSF/1 + SHLIB_CFLAGS="" + SHLIB_LD='ld -shared -expect_unresolved "*"' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + if test "$using_gcc" = "no" ; then + EXTRA_CFLAGS="-DHAVE_TZSET -std1" + fi + # see pthread_intro(3) for pthread support on osf1, k.furukawa + if test "${TCL_THREADS}" = "1" ; then + EXTRA_CFLAGS="${EXTRA_CFLAGS} -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" + if test "$using_gcc" = "no" ; then + EXTRA_CFLAGS="${EXTRA_CFLAGS} -pthread" + LDFLAGS="-pthread" + else + LIBS=`echo $LIBS | sed s/-lpthreads//` + LIBS="$LIBS -lpthread -lmach -lexc" + fi + fi + + ;; + RISCos-*) + SHLIB_CFLAGS="-G 0" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".a" + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="-Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + ;; + SCO_SV-3.2*) + # Note, dlopen is available only on SCO 3.2.5 and greater. However, + # this test works, since "uname -s" was non-standard in 3.2.4 and + # below. + if test "$using_gcc" = "yes" ; then + SHLIB_CFLAGS="-fPIC -melf" + LDFLAGS="-melf -Wl,-Bexport" + else + SHLIB_CFLAGS="-Kpic -belf" + LDFLAGS="-belf -Wl,-Bexport" + fi + SHLIB_LD="ld -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + SINIX*5.4*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + SunOS-4*) + SHLIB_CFLAGS="-PIC" + SHLIB_LD="ld" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + + # SunOS can't handle version numbers with dots in them in library + # specs, like -ltcl7.5, so use -ltcl75 instead. Also, it + # requires an extra version number at the end of .so file names. + # So, the library has to have a name like libtcl75.so.1.0 + + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + SunOS-5.[[0-6]]*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + + # Note: need the LIBS below, otherwise Tk won't find Tcl's + # symbols when dynamically loaded into tclsh. + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + ;; + SunOS-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + LDFLAGS="" + + do64bit_ok=no + if test "$do64bit" = "yes" ; then + arch=`isainfo` + if test "$arch" = "sparcv9 sparc" ; then + if test "$using_gcc" = "no" ; then + do64bit_ok=yes + if test "$do64bitVIS" = "yes" ; then + EXTRA_CFLAGS="-xarch=v9a" + LDFLAGS="-xarch=v9a" + else + EXTRA_CFLAGS="-xarch=v9" + LDFLAGS="-xarch=v9" + fi + else + AC_MSG_WARN("64bit mode not supported with GCC on $system") + fi + else + AC_MSG_WARN("64bit mode only supported sparcv9 system") + fi + fi + + # Note: need the LIBS below, otherwise Tk won't find Tcl's + # symbols when dynamically loaded into tclsh. + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + if test "$using_gcc" = "yes" ; then + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + else + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + fi + ;; + ULTRIX-4.*) + SHLIB_CFLAGS="-G 0" + SHLIB_SUFFIX=".a" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="-Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + if test "$using_gcc" = "no" ; then + EXTRA_CFLAGS="-DHAVE_TZSET -std1" + fi + ;; + UNIX_SV* | UnixWare-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers + # that don't grok the -Bexport option. Test that it does. + hold_ldflags=$LDFLAGS + AC_MSG_CHECKING(for ld accepts -Bexport flag) + LDFLAGS="${LDFLAGS} -Wl,-Bexport" + AC_TRY_LINK(, [int i;], found=yes, found=no) + LDFLAGS=$hold_ldflags + AC_MSG_RESULT($found) + if test $found = yes; then + LDFLAGS="-Wl,-Bexport" + else + LDFLAGS="" + fi + LD_SEARCH_FLAGS="" + ;; + esac + + if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then + AC_MSG_WARN("64bit support being disabled -- don\'t know magic for this platform") + fi + + # Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic + # Loading for Tcl -- What Became of It?". Proc. 2nd Tcl/Tk Workshop, + # New Orleans, LA, Computerized Processes Unlimited, 1994), then we need + # to determine which of several header files defines the a.out file + # format (a.out.h, sys/exec.h, or sys/exec_aout.h). At present, we + # support only a file format that is more or less version-7-compatible. + # In particular, + # - a.out files must begin with `struct exec'. + # - the N_TXTOFF on the `struct exec' must compute the seek address + # of the text segment + # - The `struct exec' must contain a_magic, a_text, a_data, a_bss + # and a_entry fields. + # The following compilation should succeed if and only if either sys/exec.h + # or a.out.h is usable for the purpose. + # + # Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the + # `struct exec' includes a second header that contains information that + # duplicates the v7 fields that are needed. + + if test "x$DL_OBJS" = "xtclLoadAout.o" ; then + AC_MSG_CHECKING(sys/exec.h) + AC_TRY_COMPILE([#include <sys/exec.h>],[ + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_magic == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + ], tcl_ok=usable, tcl_ok=unusable) + AC_MSG_RESULT($tcl_ok) + if test $tcl_ok = usable; then + AC_DEFINE(USE_SYS_EXEC_H) + else + AC_MSG_CHECKING(a.out.h) + AC_TRY_COMPILE([#include <a.out.h>],[ + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_magic == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + ], tcl_ok=usable, tcl_ok=unusable) + AC_MSG_RESULT($tcl_ok) + if test $tcl_ok = usable; then + AC_DEFINE(USE_A_OUT_H) + else + AC_MSG_CHECKING(sys/exec_aout.h) + AC_TRY_COMPILE([#include <sys/exec_aout.h>],[ + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_midmag == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + ], tcl_ok=usable, tcl_ok=unusable) + AC_MSG_RESULT($tcl_ok) + if test $tcl_ok = usable; then + AC_DEFINE(USE_SYS_EXEC_AOUT_H) + else + DL_OBJS="" + fi + fi + fi + fi + + # Step 5: disable dynamic loading if requested via a command-line switch. + + AC_ARG_ENABLE(load, [ --disable-load disallow dynamic loading and "load" command], + [tcl_ok=$enableval], [tcl_ok=yes]) + if test "$tcl_ok" = "no"; then + DL_OBJS="" + fi + + if test "x$DL_OBJS" != "x" ; then + BUILD_DLTEST="\$(DLTEST_TARGETS)" + else + echo "Can't figure out how to do dynamic loading or shared libraries" + echo "on this system." + SHLIB_CFLAGS="" + SHLIB_LD="" + SHLIB_SUFFIX="" + DL_OBJS="tclLoadNone.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + BUILD_DLTEST="" + fi + + # If we're running gcc, then change the C flags for compiling shared + # libraries to the right flags for gcc, instead of those for the + # standard manufacturer compiler. + + if test "$DL_OBJS" != "tclLoadNone.o" ; then + if test "$using_gcc" = "yes" ; then + case $system in + AIX-*) + ;; + BSD/OS*) + ;; + IRIX*) + ;; + NetBSD-*|FreeBSD-*|OpenBSD-*) + ;; + RISCos-*) + ;; + SCO_SV-3.2*) + ;; + ULTRIX-4.*) + ;; + *) + SHLIB_CFLAGS="-fPIC" + ;; + esac + fi + fi + + if test "$SHARED_LIB_SUFFIX" = "" ; then + SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}${SHLIB_SUFFIX}' + fi + if test "$UNSHARED_LIB_SUFFIX" = "" ; then + UNSHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a' + fi + + AC_SUBST(DL_LIBS) + AC_SUBST(CFLAGS_DEBUG) + AC_SUBST(CFLAGS_OPTIMIZE) + AC_SUBST(CFLAGS_WARNING) +]) + +#-------------------------------------------------------------------- +# SC_SERIAL_PORT +# +# Determine which interface to use to talk to the serial port. +# Note that #include lines must begin in leftmost column for +# some compilers to recognize them as preprocessor directives. +# +# Arguments: +# none +# +# Results: +# +# Defines only one of the following vars: +# USE_TERMIOS +# USE_TERMIO +# USE_SGTTY +# +#-------------------------------------------------------------------- + +AC_DEFUN(SC_SERIAL_PORT, [ + AC_MSG_CHECKING([termios vs. termio vs. sgtty]) + + AC_TRY_RUN([ +#include <termios.h> + +main() +{ + struct termios t; + if (tcgetattr(0, &t) == 0) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tk_ok=termios, tk_ok=no, tk_ok=no) + + if test $tk_ok = termios; then + AC_DEFINE(USE_TERMIOS) + else + AC_TRY_RUN([ +#include <termio.h> + +main() +{ + struct termio t; + if (ioctl(0, TCGETA, &t) == 0) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; + }], tk_ok=termio, tk_ok=no, tk_ok=no) + + if test $tk_ok = termio; then + AC_DEFINE(USE_TERMIO) + else + AC_TRY_RUN([ +#include <sgtty.h> + +main() +{ + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tk_ok=sgtty, tk_ok=none, tk_ok=none) + if test $tk_ok = sgtty; then + AC_DEFINE(USE_SGTTY) + fi + fi + fi + AC_MSG_RESULT($tk_ok) +]) + +#-------------------------------------------------------------------- +# SC_MISSING_POSIX_HEADERS +# +# Supply substitutes for missing POSIX header files. Special +# notes: +# - stdlib.h doesn't define strtol, strtoul, or +# strtod insome versions of SunOS +# - some versions of string.h don't declare procedures such +# as strstr +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# NO_DIRENT_H +# NO_ERRNO_H +# NO_VALUES_H +# NO_LIMITS_H +# NO_STDLIB_H +# NO_STRING_H +# NO_SYS_WAIT_H +# NO_DLFCN_H +# HAVE_UNISTD_H +# HAVE_SYS_PARAM_H +# +# HAVE_STRING_H ? +# +#-------------------------------------------------------------------- + +AC_DEFUN(SC_MISSING_POSIX_HEADERS, [ + + AC_MSG_CHECKING(dirent.h) + AC_TRY_LINK([#include <sys/types.h> +#include <dirent.h>], [ +#ifndef _POSIX_SOURCE +# ifdef __Lynx__ + /* + * Generate compilation error to make the test fail: Lynx headers + * are only valid if really in the POSIX environment. + */ + + missing_procedure(); +# endif +#endif +DIR *d; +struct dirent *entryPtr; +char *p; +d = opendir("foobar"); +entryPtr = readdir(d); +p = entryPtr->d_name; +closedir(d); +], tcl_ok=yes, tcl_ok=no) + + if test $tcl_ok = no; then + AC_DEFINE(NO_DIRENT_H) + fi + + AC_MSG_RESULT($tcl_ok) + AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H)]) + AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H)]) + AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H)]) + AC_CHECK_HEADER(limits.h, , [AC_DEFINE(NO_LIMITS_H)]) + AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) + if test $tcl_ok = 0; then + AC_DEFINE(NO_STDLIB_H) + fi + AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) + AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) + + # See also memmove check below for a place where NO_STRING_H can be + # set and why. + + if test $tcl_ok = 0; then + AC_DEFINE(NO_STRING_H) + fi + + AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H)]) + AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H)]) + + # OS/390 lacks sys/param.h (and doesn't need it, by chance). + + AC_HAVE_HEADERS(unistd.h sys/param.h) + +]) + +#-------------------------------------------------------------------- +# SC_PATH_X +# +# Locate the X11 header files and the X11 library archive. Try +# the ac_path_x macro first, but if it doesn't find the X stuff +# (e.g. because there's no xmkmf program) then check through +# a list of possible directories. Under some conditions the +# autoconf macro will return an include directory that contains +# no include files, so double-check its result just to be safe. +# +# Arguments: +# none +# +# Results: +# +# Sets the the following vars: +# XINCLUDES +# XLIBSW +# +#-------------------------------------------------------------------- + +AC_DEFUN(SC_PATH_X, [ + AC_PATH_X + not_really_there="" + if test "$no_x" = ""; then + if test "$x_includes" = ""; then + AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes") + else + if test ! -r $x_includes/X11/Intrinsic.h; then + not_really_there="yes" + fi + fi + fi + if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then + AC_MSG_CHECKING(for X11 header files) + XINCLUDES="# no special path needed" + AC_TRY_CPP([#include <X11/Intrinsic.h>], , XINCLUDES="nope") + if test "$XINCLUDES" = nope; then + dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" + for i in $dirs ; do + if test -r $i/X11/Intrinsic.h; then + AC_MSG_RESULT($i) + XINCLUDES=" -I$i" + break + fi + done + fi + else + if test "$x_includes" != ""; then + XINCLUDES=-I$x_includes + else + XINCLUDES="# no special path needed" + fi + fi + if test "$XINCLUDES" = nope; then + AC_MSG_RESULT(couldn't find any!) + XINCLUDES="# no include files found" + fi + + if test "$no_x" = yes; then + AC_MSG_CHECKING(for X11 libraries) + XLIBSW=nope + dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" + for i in $dirs ; do + if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then + AC_MSG_RESULT($i) + XLIBSW="-L$i -lX11" + x_libraries="$i" + break + fi + done + else + if test "$x_libraries" = ""; then + XLIBSW=-lX11 + else + XLIBSW="-L$x_libraries -lX11" + fi + fi + if test "$XLIBSW" = nope ; then + AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) + fi + if test "$XLIBSW" = nope ; then + AC_MSG_RESULT(couldn't find any! Using -lX11.) + XLIBSW=-lX11 + fi +]) +#-------------------------------------------------------------------- +# SC_BLOCKING_STYLE +# +# The statements below check for systems where POSIX-style +# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. +# On these systems (mostly older ones), use the old BSD-style +# FIONBIO approach instead. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# HAVE_SYS_IOCTL_H +# HAVE_SYS_FILIO_H +# USE_FIONBIO +# O_NONBLOCK +# +#-------------------------------------------------------------------- + +AC_DEFUN(SC_BLOCKING_STYLE, [ + AC_CHECK_HEADERS(sys/ioctl.h) + AC_CHECK_HEADERS(sys/filio.h) + AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) + if test -f /usr/lib/NextStep/software_version; then + system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` + else + system=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + system=unknown + else + # Special check for weird MP-RAS system (uname returns weird + # results, and the version is kept in special file). + + if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then + system=MP-RAS-`awk '{print $3}' /etc/.relid'` + fi + if test "`uname -s`" = "AIX" ; then + system=AIX-`uname -v`.`uname -r` + fi + fi + fi + case $system in + # There used to be code here to use FIONBIO under AIX. However, it + # was reported that FIONBIO doesn't work under AIX 3.2.5. Since + # using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO + # code (JO, 5/31/97). + + OSF*) + AC_DEFINE(USE_FIONBIO) + AC_MSG_RESULT(FIONBIO) + ;; + SunOS-4*) + AC_DEFINE(USE_FIONBIO) + AC_MSG_RESULT(FIONBIO) + ;; + ULTRIX-4.*) + AC_DEFINE(USE_FIONBIO) + AC_MSG_RESULT(FIONBIO) + ;; + *) + AC_MSG_RESULT(O_NONBLOCK) + ;; + esac +]) + +#-------------------------------------------------------------------- +# SC_TIME_HANLDER +# +# Checks how the system deals with time.h, what time structures +# are used on the system, and what fields the structures have. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# USE_DELTA_FOR_TZ +# HAVE_TM_GMTOFF +# HAVE_TM_TZADJ +# HAVE_TIMEZONE_VAR +# +#-------------------------------------------------------------------- + +AC_DEFUN(SC_TIME_HANDLER, [ + AC_CHECK_HEADERS(sys/time.h) + AC_HEADER_TIME + AC_STRUCT_TIMEZONE + + AC_MSG_CHECKING([tm_tzadj in struct tm]) + AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_tzadj;], + [AC_DEFINE(HAVE_TM_TZADJ) + AC_MSG_RESULT(yes)], + AC_MSG_RESULT(no)) + + AC_MSG_CHECKING([tm_gmtoff in struct tm]) + AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_gmtoff;], + [AC_DEFINE(HAVE_TM_GMTOFF) + AC_MSG_RESULT(yes)], + AC_MSG_RESULT(no)) + + # + # Its important to include time.h in this check, as some systems + # (like convex) have timezone functions, etc. + # + have_timezone=no + AC_MSG_CHECKING([long timezone variable]) + AC_TRY_COMPILE([#include <time.h>], + [extern long timezone; + timezone += 1; + exit (0);], + [have_timezone=yes + AC_DEFINE(HAVE_TIMEZONE_VAR) + AC_MSG_RESULT(yes)], + AC_MSG_RESULT(no)) + + # + # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. + # + if test "$have_timezone" = no; then + AC_MSG_CHECKING([time_t timezone variable]) + AC_TRY_COMPILE([#include <time.h>], + [extern time_t timezone; + timezone += 1; + exit (0);], + [AC_DEFINE(HAVE_TIMEZONE_VAR) + AC_MSG_RESULT(yes)], + AC_MSG_RESULT(no)) + fi + + # + # AIX does not have a timezone field in struct tm. When the AIX bsd + # library is used, the timezone global and the gettimeofday methods are + # to be avoided for timezone deduction instead, we deduce the timezone + # by comparing the localtime result on a known GMT value. + # + + if test "`uname -s`" = "AIX" ; then + AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes) + if test $libbsd = yes; then + AC_DEFINE(USE_DELTA_FOR_TZ) + fi + fi +]) + +#-------------------------------------------------------------------- +# SC_BUGGY_STRTOD +# +# Under Solaris 2.4, strtod returns the wrong value for the +# terminating character under some conditions. Check for this +# and if the problem exists use a substitute procedure +# "fixstrtod" (provided by Tcl) that corrects the error. +# Also, on Compaq's Tru64 Unix 5.0, +# strtod(" ") returns 0.0 instead of a failure to convert. +# +# Arguments: +# none +# +# Results: +# +# Might defines some of the following vars: +# strtod (=fixstrtod) +# +#-------------------------------------------------------------------- + +AC_DEFUN(SC_BUGGY_STRTOD, [ + AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) + if test "$tcl_strtod" = 1; then + AC_MSG_CHECKING([for Solaris2.4/Tru64 strtod bugs]) + AC_TRY_RUN([ + extern double strtod(); + int main() + { + char *string = "NaN", *spaceString = " "; + char *term; + double value; + value = strtod(string, &term); + if ((term != string) && (term[-1] == 0)) { + exit(1); + } + value = strtod(spaceString, &term); + if (term == (spaceString+1)) { + exit(1); + } + exit(0); + }], tcl_ok=1, tcl_ok=0, tcl_ok=0) + if test "$tcl_ok" = 1; then + AC_MSG_RESULT(ok) + else + AC_MSG_RESULT(buggy) + LIBOBJS="$LIBOBJS fixstrtod.o" + AC_DEFINE(strtod, fixstrtod) + fi + fi +]) + +#-------------------------------------------------------------------- +# SC_TCL_LINK_LIBS +# +# Search for the libraries needed to link the Tcl shell. +# Things like the math library (-lm) and socket stuff (-lsocket vs. +# -lnsl) are dealt with here. +# +# Arguments: +# Requires the following vars to be set in the Makefile: +# DL_LIBS +# LIBS +# MATH_LIBS +# +# Results: +# +# Subst's the following var: +# TCL_LIBS +# MATH_LIBS +# +# Might append to the following vars: +# LIBS +# +# Might define the following vars: +# HAVE_NET_ERRNO_H +# +#-------------------------------------------------------------------- + +AC_DEFUN(SC_TCL_LINK_LIBS, [ + #-------------------------------------------------------------------- + # On a few very rare systems, all of the libm.a stuff is + # already in libc.a. Set compiler flags accordingly. + # Also, Linux requires the "ieee" library for math to work + # right (and it must appear before "-lm"). + #-------------------------------------------------------------------- + + AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") + AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) + + #-------------------------------------------------------------------- + # On AIX systems, libbsd.a has to be linked in to support + # non-blocking file IO. This library has to be linked in after + # the MATH_LIBS or it breaks the pow() function. The way to + # insure proper sequencing, is to add it to the tail of MATH_LIBS. + # This library also supplies gettimeofday. + #-------------------------------------------------------------------- + + libbsd=no + if test "`uname -s`" = "AIX" ; then + AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes) + if test $libbsd = yes; then + MATH_LIBS="$MATH_LIBS -lbsd" + fi + fi + + + #-------------------------------------------------------------------- + # Interactive UNIX requires -linet instead of -lsocket, plus it + # needs net/errno.h to define the socket-related error codes. + #-------------------------------------------------------------------- + + AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) + AC_CHECK_HEADER(net/errno.h, [AC_DEFINE(HAVE_NET_ERRNO_H)]) + + #-------------------------------------------------------------------- + # Check for the existence of the -lsocket and -lnsl libraries. + # The order here is important, so that they end up in the right + # order in the command line generated by make. Here are some + # special considerations: + # 1. Use "connect" and "accept" to check for -lsocket, and + # "gethostbyname" to check for -lnsl. + # 2. Use each function name only once: can't redo a check because + # autoconf caches the results of the last check and won't redo it. + # 3. Use -lnsl and -lsocket only if they supply procedures that + # aren't already present in the normal libraries. This is because + # IRIX 5.2 has libraries, but they aren't needed and they're + # bogus: they goof up name resolution if used. + # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. + # To get around this problem, check for both libraries together + # if -lsocket doesn't work by itself. + #-------------------------------------------------------------------- + + tcl_checkBoth=0 + AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) + if test "$tcl_checkSocket" = 1; then + AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, + LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) + fi + if test "$tcl_checkBoth" = 1; then + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) + fi + AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, + [LIBS="$LIBS -lnsl"])]) + + # Don't perform the eval of the libraries here because DL_LIBS + # won't be set until we call SC_CONFIG_CFLAGS + + TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' + AC_SUBST(TCL_LIBS) + AC_SUBST(MATH_LIBS) +]) |