diff options
Diffstat (limited to 'win/configure.in')
| -rw-r--r-- | win/configure.in | 257 |
1 files changed, 104 insertions, 153 deletions
diff --git a/win/configure.in b/win/configure.in index 648c8da..8e49ac6 100644 --- a/win/configure.in +++ b/win/configure.in @@ -1,186 +1,137 @@ -dnl This file is an input file used by the GNU "autoconf" program to -dnl generate the file "configure", which is run during Tcl installation -dnl to configure the system for the local environment. +# This file is an input file used by the GNU "autoconf" program to +# generate the file "configure", which is run during Tk installation +# to configure the system for the local environment. +# +# RCS: @(#) $Id: configure.in,v 1.2 1999/06/16 20:11:30 surles Exp $ + AC_INIT(../generic/tk.h) -# RCS: @(#) $Id: configure.in,v 1.1 1999/06/02 19:30:23 surles Exp $ TK_VERSION=8.1 TK_MAJOR_VERSION=8 TK_MINOR_VERSION=1 TK_PATCH_LEVEL=.2 -VERSION=${TK_VERSION} +VER=$TK_MAJOR_VERSION$TK_MINOR_VERSION -# Check whether --enable-gcc or --disable-gcc was given. Do this before -# AC_PROG_CC and AC_CYGWIN are called so the compiler can be fully tested -# by built-in autoconf tools. +#-------------------------------------------------------------------- +# Check whether --enable-gcc or --disable-gcc was given. Do this +# before AC_PROG_CC and AC_CYGWIN are called so the compiler can +# be fully tested by built-in autoconf tools. +#-------------------------------------------------------------------- -AC_ARG_ENABLE(gcc, [ --enable-gcc build with gcc], - [tcl_ok=$enableval], [tcl_ok=test_all]) -if test "$tcl_ok" = "yes"; then - CC=gcc -fi -if test "$tcl_ok" = "no"; then - CC=cl -fi +SC_ENABLE_GCC + +#-------------------------------------------------------------------- +# Checks to see if the make progeam sets the $MAKE variable. +#-------------------------------------------------------------------- AC_PROG_MAKE_SET + +#-------------------------------------------------------------------- +# These two macros perform additinal compiler test. +#-------------------------------------------------------------------- + AC_PROG_CC AC_CYGWIN + +#-------------------------------------------------------------------- +# Determines the correct binary file extension (.o, .obj, .exe etc.) +#-------------------------------------------------------------------- + AC_OBJEXT AC_EXEEXT #-------------------------------------------------------------------- -# See if there was a command-line option for where Tcl is; if -# not, assume that its top-level directory is a sibling of ours. -# Try the patch-level-specific directory first, then the general one. -#-------------------------------------------------------------------- - -if test -d ../../tcl8.1$TK_PATCH_LEVEL/unix; then - TCL_BIN_DEFAULT=../../tcl8.1$TK_PATCH_LEVEL/unix -else - TCL_BIN_DEFAULT=../../tcl8.1/unix -fi - -AC_ARG_WITH(tcl, [ --with-tcl=DIR use Tcl 8.1 binaries from DIR], - TCL_BIN_DIR=$withval, TCL_BIN_DIR=`cd $TCL_BIN_DEFAULT; pwd`) -if test ! -d $TCL_BIN_DIR; then - AC_MSG_ERROR(Tcl directory $TCL_BIN_DIR does not exist) -fi -if test ! -f $TCL_BIN_DIR/Makefile; then - AC_MSG_ERROR(There is no Makefile in $TCL_BIN_DIR: perhaps you did not specify the Tcl *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?) -else - echo "building against Tcl binaries in: $TCL_BIN_DIR" -fi - -# Set the default compiler switches based on the --enable-symbols option - -AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols], - [tcl_ok=$enableval], [tcl_ok=no]) -if test "$tcl_ok" = "yes"; then - CFLAGS='${CFLAGS_DEBUG}' - LD_FLAGS='${LDFLAGS_DEBUG}' - TCL_DBGX=d - echo "building with debug symbols" -else - CFLAGS='${CFLAGS_OPTIMIZE}' - LD_FLAGS='${LDFLAGS_OPTIMIZE}' - TCL_DBGX="" - echo "building without debug symbols" -fi - -# Trick to replace DBGX with TCL_DBGX -DBGX='${TCL_DBGX}' -eval "TCL_LIB_FILE=${TCL_LIB_FILE}" - # Check whether --enable-threads or --disable-threads was given. +#-------------------------------------------------------------------- + +SC_ENABLE_THREADS + +#-------------------------------------------------------------------- +# The statements below define a collection of symbols related to +# building libtk as a shared library instead of a static library. +#-------------------------------------------------------------------- + +SC_ENABLE_SHARED + +#-------------------------------------------------------------------- +# The statements below define a collection of compile flags. This +# macro depends on the value of SHARED_BUILD, and should be called +# after SC_ENABLE_SHARED checks the configure switches. +#-------------------------------------------------------------------- + +SC_CONFIG_CFLAGS + +#-------------------------------------------------------------------- +# Set the default compiler switches based on the --enable-symbols +# option. This macro depends on C flags, and should be called +# after SC_CONFIG_CFLAGS macro is called. +#-------------------------------------------------------------------- + +SC_ENABLE_SYMBOLS + +TK_DBGX=${DBGX} +CFLAGS=${CFLAGS_DEFAULT} +LDFLAGS=${LDFLAGS_DEFAULT} + +#-------------------------------------------------------------------- +# Locate and source the tclConfig.sh file. +#-------------------------------------------------------------------- + +SC_PATH_TCLCONFIG($TK_PATCH_LEVEL) +SC_LOAD_TCLCONFIG + +#-------------------------------------------------------------------- +# Perform final evaluations of variables with possible substitutions. +#-------------------------------------------------------------------- + +eval "TK_SRC_DIR=`cd $srcdir; pwd`" +eval "TK_DLL_FILE=tk$VER${DLLSUFFIX}" +eval "TK_LIB_FILE=tk$VER${LIBSUFFIX}" +eval "TK_STUB_LIB_FILE=tkstub$VER${LIBSUFFIX}" +eval "TCL_DLL_FILE=tcl$VER${DLLSUFFIX}" +eval "TCL_LIB_FILE=tcl$VER${LIBSUFFIX}" +eval "TCL_STUB_LIB_FILE=tclstub$VER${LIBSUFFIX}" + +AC_SUBST(TK_VERSION) +AC_SUBST(TK_MAJOR_VERSION) +AC_SUBST(TK_MINOR_VERSION) +AC_SUBST(TK_PATCH_LEVEL) +AC_SUBST(TK_DBGX) +AC_SUBST(TK_LIB_FILE) +AC_SUBST(TK_DLL_FILE) +AC_SUBST(TK_STUB_LIB_FILE) +AC_SUBST(TK_SRC_DIR) +AC_SUBST(TK_BIN_DIR) +AC_SUBST(TCL_VERSION) +AC_SUBST(TCL_MAJOR_VERSION) +AC_SUBST(TCL_MINOR_VERSION) +AC_SUBST(TCL_PATCH_LEVEL) +AC_SUBST(TCL_LIB_FILE) +AC_SUBST(TCL_DLL_FILE) +AC_SUBST(TCL_STUB_LIB_FILE) +AC_SUBST(TCL_SRC_DIR) +AC_SUBST(TCL_BIN_DIR) +AC_SUBST(TCL_DBGX) -AC_ARG_ENABLE(threads, [ --enable-threads build with threads], - [tcl_ok=$enableval], [tcl_ok=no]) -if test "$tcl_ok" = "yes"; then - AC_DEFINE(TCL_THREADS) - echo "building with threads enabled" -else - echo "building with threads disabled (default)" -fi - -#-------------------------------------------------------------------- -# The statements below define a collection of symbols related to -# building libtcl as a shared library instead of a static library. -#-------------------------------------------------------------------- - -AC_ARG_ENABLE(shared, - [ --enable-shared build libtcl as a shared library (on by default)], - [tcl_ok=$enableval], [tcl_ok=yes]) - -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - tcl_ok=$enableval -else - tcl_ok=yes -fi - -if test "$tcl_ok" = "yes" ; then - TCL_SHARED_BUILD=1 -else - TCL_SHARED_BUILD=0 - AC_DEFINE(STATIC_BUILD) -fi - -EXTRA_CFLAGS="" -# set various compiler flags depending on whether we are using gcc or cl -if test "${GCC}" = "yes" ; then - CFLAGS_DEBUG=-g - CFLAGS_OPTIMIZE=-O - CFLAGS_WARNING="-Wall -Wconversion" - LDFLAGS_DEBUG=-g - LDFLAGS_OPTIMIZE=-O - PATHTYPE=-u - - # Specify the CC output file names based on the target name - CC_OBJNAME="-o \$@" - CC_EXENAME="-o \$@" -else - SHLIB_LD="link -dll -nologo" - SHLIB_LD_LIBS="user32.lib advapi32.lib" - LIBS="user32.lib advapi32.lib" - AR="lib -nologo" - MAKE_LIB="\${AR} -out:\$@" - MAKE_EXE="\${CC} -Fe\$@" - - if test "${TCL_SHARED_BUILD}" = "0" ; then - # static - echo "building static version" - runtime=-MT - MAKE_DLL="echo " - LIBSUFFIX="s\${TCL_DBGX}.lib" - LIBRARIES="\${STATIC_LIBRARIES}" - EXESUFFIX="s\${TCL_DBGX}.exe" - DLLSUFFIX="" - else - # dynamic - echo "building dynamic version" - runtime=-MD - MAKE_DLL="\${SHLIB_LD} \${SHLIB_LD_LIBS} -out:\$@" - LIBSUFFIX="\${TCL_DBGX}.lib" - DLLSUFFIX="\${TCL_DBGX}.dll" - EXESUFFIX="\${TCL_DBGX}.exe" - LIBRARIES="\${SHARED_LIBRARIES}" - fi - - EXTRA_CFLAGS="-YX -nologo" - CFLAGS_DEBUG="-Z7 -Od -WX ${runtime}d" - CFLAGS_OPTIMIZE="-O2 -Gs -GD ${runtime}" - CFLAGS_WARNING="-W3" - LDFLAGS_DEBUG="-debug" - LDFLAGS_OPTIMIZE="-release" - PATHTYPE=-w - - # Specify the CC output file names based on the target name - CC_OBJNAME="-Fo\$@" - CC_EXENAME="-Fe\$@" -fi - -eval "LD_FLAGS=${LD_FLAGS}" AC_SUBST(PATHTYPE) AC_SUBST(CFLAGS_DEBUG) AC_SUBST(CFLAGS_OPTIMIZE) AC_SUBST(CFLAGS_WARNING) AC_SUBST(EXTRA_CFLAGS) -AC_SUBST(TCL_DBGX) -AC_SUBST(TCL_LIB_FILE) -AC_SUBST(TCL_MAJOR_VERSION) -AC_SUBST(TCL_MINOR_VERSION) -AC_SUBST(TCL_PATCH_LEVEL) -AC_SUBST(TCL_VERSION) AC_SUBST(SHLIB_LD) AC_SUBST(SHLIB_LD_LIBS) AC_SUBST(SHLIB_CFLAGS) AC_SUBST(SHLIB_SUFFIX) AC_SUBST(CC_OBJNAME) AC_SUBST(CC_EXENAME) +AC_SUBST(LDFLAGS) +AC_SUBST(LDFLAGS_DEBUG) +AC_SUBST(LDFLAGS_OPTIMIZE) +AC_SUBST(LDFLAGS_CONSOLE) +AC_SUBST(LDFLAGS_WINDOW) AC_SUBST(AR) +AC_SUBST(RC) AC_SUBST(DLLSUFFIX) AC_SUBST(LIBSUFFIX) AC_SUBST(EXESUFFIX) @@ -188,4 +139,4 @@ AC_SUBST(LIBRARIES) AC_SUBST(MAKE_LIB) AC_SUBST(MAKE_DLL) -AC_OUTPUT(Makefile) +AC_OUTPUT(Makefile tkConfig.sh) |