diff options
Diffstat (limited to 'win/makefile.vc')
| -rw-r--r-- | win/makefile.vc | 189 |
1 files changed, 127 insertions, 62 deletions
diff --git a/win/makefile.vc b/win/makefile.vc index 2f60436..d84270d 100644 --- a/win/makefile.vc +++ b/win/makefile.vc @@ -1,15 +1,16 @@ -#------------------------------------------------------------------------------ +#------------------------------------------------------------- -*- makefile -*- # makefile.vc -- # # Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# +# # Copyright (c) 1995-1996 Sun Microsystems, Inc. # Copyright (c) 1998-2000 Ajuba Solutions. # Copyright (c) 2001-2005 ActiveState Corporation. # Copyright (c) 2001-2004 David Gravereaux. +# Copyright (c) 2003-2008 Pat Thoyts. #------------------------------------------------------------------------------ # Check to see we are configured to build with MSVC (MSDEVDIR, MSVCDIR or @@ -41,23 +42,28 @@ the build instructions. # turn on the 64-bit compiler, if your SDK has it. # # 3) Targets are: -# release -- builds the core, the shell. (default) -# core -- Only builds the core. -# all -- builds everything. -# test -- builds and runs the test suite. -# tktest -- just builds the binaries for the test suite. -# install -- installs the built binaries and libraries to $(INSTALLDIR) +# release -- Builds the core, the shell. (default) +# dlls -- Just builds the windows extensions. +# shell -- Just builds the shell and the core. +# core -- Only builds the core [tkXX.(dll|lib)]. +# all -- Builds everything. +# test -- Builds and runs the test suite. +# tktest -- Just builds the binaries for the test suite. +# install -- Installs the built binaries and libraries to $(INSTALLDIR) # as the root of the install tree. -# cwish -- builds a console version of wish. -# clean -- removes the contents of $(TMP_DIR) -# hose -- removes the contents of $(TMP_DIR) and $(OUT_DIR) -# genstubs -- rebuilds the Stubs table and support files (dev only). +# cwish -- Builds a console version of wish. +# tidy/clean/hose -- varying levels of cleaning. +# genstubs -- Rebuilds the Stubs table and support files (dev only). # depend -- Generates an accurate set of source dependancies for this # makefile. Helpful to avoid problems when the sources are # refreshed and you rebuild, but can "overbuild" when common # headers like tkInt.h just get small changes. -# winhelp -- builds the windows .hlp file for Tcl from the troff man -# files. +# htmlhelp -- Builds a Windows .chm help file for Tcl and Tk from the +# troff manual pages found in $(ROOT)\doc. You need to +# have installed the HTML Help Compiler package from Microsoft +# to produce the .chm file. +# winhelp -- Builds the windows .hlp file for Tcl from the troff man +# files found in $(ROOT)\doc. # # 4) Macros usable on the commandline: # TCLDIR=<path> @@ -70,60 +76,65 @@ the build instructions. # Sets where to install Tcl from the built binaries. # C:\Progra~1\Tcl is assumed when not specified. # -# OPTS=static,msvcrt,linkexten,threads,symbols,profile,unchecked,none +# OPTS=loimpact,msvcrt,nothreads,noxp,pdbs,profile,square,static,staticpkg,symbols,unchecked,none # Sets special options for the core. The default is for none. # Any combination of the above may be used (comma separated). # 'none' will over-ride everything to nothing. # -# static = Builds a static library of the core instead of a -# dll. The shell will be static (and large), as well. -# msvcrt = Effects the static option only to switch it from +# loimpact = Adds a flag for how NT treats the heap to keep memory +# in use, low. This is said to impact alloc performance. +# msvcrt = Affects the static option only to switch it from # using libcmt(d) as the C runtime [by default] to # msvcrt(d). This is useful for static embedding # support. +# nothreads= Turns off full multithreading support. +# noxp = If you do not have the uxtheme.h header then you +# cannot include support for XP themeing. +# square = Include the demo square widget. +# static = Builds a static library of the core instead of a +# dll. The shell will be static (and large), as well. # staticpkg= Affects the static option only to switch wishXX.exe # to have the dde and reg extension linked inside it. -# threads = Turns on full multithreading support. -# thrdalloc= Use the thread allocator (shared global free pool). -# symbols = Adds symbols for step debugging. +# pdbs = Build detached symbols for release builds. # profile = Adds profiling hooks. Map file is assumed. -# loimpact = Adds a flag for how NT treats the heap to keep -# memory in use, low. This is said to impact alloc -# performance. -# unchecked= Allows a symbols build to not use the debug +# thrdalloc = Use the thread allocator (shared global free pool) +# This is the default on threaded builds. +# tclalloc = Use the old non-thread allocator +# symbols = Debug build. Links to the debug C runtime, disables +# optimizations and creates pdb symbols files. +# unchecked = Allows a symbols build to not use the debug # enabled runtime (msvcrt.dll not msvcrtd.dll # or libcmt.lib not libcmtd.lib). -# noxp = If you do not have the uxtheme.h header then you -# cannot include support for XP themeing. -# square = Include the demo square widget. # -# STATS=memdbg,compdbg,none +# STATS=compdbg,memdbg,none # Sets optional memory and bytecode compiler debugging code added # to the core. The default is for none. Any combination of the # above may be used (comma separated). 'none' will over-ride # everything to nothing. # -# memdbg = Enables the debugging memory allocator. # compdbg = Enables byte compilation logging. +# memdbg = Enables the debugging memory allocator. # -# CHECKS=nodep,fullwarn,none +# CHECKS=64bit,fullwarn,nodep,none # Sets special macros for checking compatability. # -# nodep = Turns off compatability macros to ensure Tk isn't -# being built with deprecated functions. +# 64bit = Enable 64bit portability warnings (if available) # fullwarn = Builds with full compiler and link warnings enabled. # Very verbose. +# nodep = Turns off compatability macros to ensure the core +# isn't being built with deprecated functions. # -# MACHINE=(IX86|IA64|AMD64|ALPHA) +# MACHINE=(ALPHA|AMD64|IA64|IX86) # Set the machine type used for the compiler, linker, and # resource compiler. This hook is needed to tell the tools # when alternate platforms are requested. IX86 is the default -# when not specified. +# when not specified. If the CPU environment variable has been +# set (ie: recent Platform SDK) then MACHINE is set from CPU. # # TMP_DIR=<path> # OUT_DIR=<path> # Hooks to allow the intermediate and output directories to be -# changed. $(OUT_DIR) is assumed to be +# changed. $(OUT_DIR) is assumed to be # $(BINROOT)\(Release|Debug) based on if symbols are requested. # $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default. # @@ -171,7 +182,7 @@ Please `cd` to its location first. !error $(MSG) !endif -PROJECT = tk +PROJECT = tk !include "rules.vc" !if $(TCLINSTALL) @@ -351,7 +362,7 @@ TKOBJS = \ $(TMP_DIR)\tkStubInit.obj \ $(TMP_DIR)\tkStubLib.obj \ $(TMP_DIR)\tkWindow.obj \ - $(TTK_OBJS) \ + $(TTK_OBJS) \ !if !$(STATIC_BUILD) $(TMP_DIR)\tk.res !endif @@ -392,7 +403,8 @@ TTK_OBJS = \ $(TMP_DIR)\ttkStubInit.obj TKSTUBOBJS = \ - $(TMP_DIR)\tkStubLib.obj $(TMP_DIR)\ttkStubLib.obj + $(TMP_DIR)\tkStubLib.obj \ + $(TMP_DIR)\ttkStubLib.obj WINDIR = $(ROOT)\win @@ -417,7 +429,7 @@ CONFIG_DEFS =-DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 \ -DTTK_SQUARE_WIDGET=1 \ !endif -TK_DEFINES =-DBUILD_ttk $(OPTDEFINES) $(CONFIG_DEFS) +TK_DEFINES =-DBUILD_ttk $(OPTDEFINES) $(CONFIG_DEFS) -Dinline=__inline #--------------------------------------------------------------------- # Compile flags @@ -465,7 +477,6 @@ CON_CFLAGS = $(cdebug) $(cflags) $(crt) -DCONSOLE WISH_CFLAGS = $(BASE_CFLAGS) $(TK_DEFINES) STUB_CFLAGS = $(cflags) $(cdebug) $(TK_DEFINES) - #--------------------------------------------------------------------- # Link flags #--------------------------------------------------------------------- @@ -474,6 +485,9 @@ STUB_CFLAGS = $(cflags) $(cdebug) $(TK_DEFINES) ldebug = -debug -debugtype:cv !else ldebug = -release -opt:ref -opt:icf,3 +!if $(SYMBOLS) +ldebug = $(ldebug) -debug -debugtype:cv +!endif !endif ### Declarations common to all linker options @@ -515,7 +529,7 @@ guilibs = $(baselibs) gdi32.lib #--------------------------------------------------------------------- !if "$(TESTPAT)" != "" -TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) +TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) !endif @@ -543,9 +557,10 @@ test-classic: setup $(TKTEST) $(TKLIB) $(CAT32) @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif !if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" - $(TKTEST) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) | $(CAT32) + $(DEBUGGER) $(TKTEST) "$(ROOT:\=/)/tests/all.tcl" $(TESTFLAGS) | $(CAT32) !else - $(TKTEST) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) | $(CAT32) + $(DEBUGGER) $(TKTEST) "$(ROOT:\=/)/tests/all.tcl" $(TESTFLAGS) > tests.log + type tests.log | more !endif test-ttk: setup $(TKTEST) $(TKLIB) $(CAT32) @@ -558,9 +573,10 @@ test-ttk: setup $(TKTEST) $(TKLIB) $(CAT32) @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif !if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" - $(TKTEST) "$(ROOT)/tests/ttk/all.tcl" $(TESTFLAGS) | $(CAT32) + $(DEBUGGER) $(TKTEST) "$(ROOT:\=/)/tests/ttk/all.tcl" $(TESTFLAGS) | $(CAT32) !else - $(TKTEST) "$(ROOT)/tests/ttk/all.tcl" $(TESTFLAGS) | $(CAT32) + $(DEBUGGER) $(TKTEST) "$(ROOT:\=/)/tests/ttk/all.tcl" $(TESTFLAGS) > tests.log + type tests.log | more !endif runtest: setup $(TKTEST) $(TKLIB) $(CAT32) @@ -572,7 +588,7 @@ runtest: setup $(TKTEST) $(TKLIB) $(CAT32) !else @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif - $(TKTEST) + $(DEBUGGER) $(TKTEST) rundemo: setup $(TKTEST) $(TKLIB) $(CAT32) @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) @@ -583,7 +599,7 @@ rundemo: setup $(TKTEST) $(TKLIB) $(CAT32) !else @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif - $(TKTEST) $(ROOT)\library\demos\widget + $(TKTEST) $(ROOT:\=/)\library\demos\widget shell: setup $(WISH) @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) @@ -594,7 +610,7 @@ shell: setup $(WISH) !else @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif - $(WISH) << + $(DEBUGGER) $(WISH) << console show << @@ -656,9 +672,8 @@ $(CAT32): $(_TCLDIR)\win\cat.c $(link32) $(conlflags) -out:$@ -stack:16384 $(TMP_DIR)\cat.obj $(baselibs) $(_VC_MANIFEST_EMBED_EXE) - #--------------------------------------------------------------------- -# Regenerate the stubs files. +# Regenerate the stubs files. [Development use only] #--------------------------------------------------------------------- genstubs: @@ -672,9 +687,49 @@ genstubs: #--------------------------------------------------------------------- -# Regenerate the windows help files. +# Build the Windows HTML help file. #--------------------------------------------------------------------- +# NOTE: you can define HHC on the command-line to override this +!ifndef HHC +HHC=""%ProgramFiles%\HTML Help Workshop\hhc.exe"" +!endif +HTMLDIR=$(ROOT)\html +HTMLBASE=TclTk$(VERSION) +HHPFILE=$(HTMLDIR)\$(HTMLBASE).hhp +CHMFILE=$(HTMLDIR)\$(HTMLBASE).chm + +htmlhelp: chmsetup $(CHMFILE) + +$(CHMFILE): $(DOCDIR)\* + @$(TCLSH) $(TOOLSDIR)\tcltk-man2html.tcl + @echo Compiling HTML help project + @$(HHC) <<$(HHPFILE) >NUL +[OPTIONS] +Compatibility=1.1 or later +Compiled file=$(HTMLBASE).chm +Display compile progress=no +Error log file=$(HTMLBASE).log +Language=0x409 English (United States) +Title=Tcl/Tk $(DOT_VERSION) Help +[FILES] +contents.htm +docs.css +Keywords +TclCmd +TclLib +TkCmd +TkLib +UserCmd +<< + +chmsetup: + @if not exist $(HTMLDIR)\nul mkdir $(HTMLDIR) + +#------------------------------------------------------------------------- +# Build the old-style Windows .hlp file +#------------------------------------------------------------------------- + HLPBASE = $(PROJECT)$(TK_VERSION) HELPFILE = $(OUT_DIR)\$(HLPBASE).hlp HELPCNT = $(OUT_DIR)\$(HLPBASE).cnt @@ -723,8 +778,8 @@ CreateButton(3, "Wiki", ExecFile("http://wiki.tcl.tk")) CreateButton(4, "FAQ", ExecFile("http://www.purl.org/NET/Tcl-FAQ/")) << cd $(MAKEDIR) - $(CPY) "$(DOCTMP_DIR)\$(@B).hlp" "$(OUT_DIR)" - $(CPY) "$(DOCTMP_DIR)\$(@B).cnt" "$(OUT_DIR)" + @$(CPY) "$(DOCTMP_DIR)\$(@B).hlp" "$(OUT_DIR)" + @$(CPY) "$(DOCTMP_DIR)\$(@B).cnt" "$(OUT_DIR)" $(MAN2TCL): $(TCLTOOLSDIR)\$$(@B).c $(cc32) $(TK_CFLAGS) -Fo$(@D)\ $(TCLTOOLSDIR)\$(@B).c @@ -798,11 +853,15 @@ $(TMP_DIR)\tkStubLib.obj : $(GENERICDIR)\tkStubLib.c $(TMP_DIR)\wish.exe.manifest: $(WINDIR)\wish.exe.manifest.in @nmakehlp -s << $** >$@ @MACHINE@ $(MACHINE:IX86=X86) -@TK_WIN_VERSION@ $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION).0.0 +@TK_WIN_VERSION@ $(TK_DOTVERSION).0.0 << #--------------------------------------------------------------------- -# Generate the makefile depedancies. +# Generate the source dependencies. Having dependency rules will +# improve incremental build accuracy without having to resort to a +# full rebuild just because some non-global header file like +# tclCompile.h was changed. These rules aren't needed when building +# from scratch. #--------------------------------------------------------------------- depend: @@ -810,7 +869,7 @@ depend: @echo Build tclsh first! !else set TCL_LIBRARY=$(TCL_LIBRARY) - $(TCLSH) $(TCLTOOLSDIR)\mkdepend.tcl -vc32 -out:"$(OUT_DIR)\depend.mk" \ + $(TCLSH) $(TCLTOOLSDIR:\=/)/mkdepend.tcl -vc32 -out:"$(OUT_DIR)\depend.mk" \ -passthru:"-DBUILD_tk $(TK_INCLUDES)" $(GENERICDIR),$$(GENERICDIR) \ $(WINDIR),$$(WINDIR) $(TTKDIR),$$(TTKDIR) $(XLIBDIR),$$(XLIBDIR) \ $(BITMAPDIR),$$(BITMAPDIR) @<< @@ -818,9 +877,8 @@ $(TKOBJS) << !endif - #--------------------------------------------------------------------- -# Dedependency rules +# Dependency rules #--------------------------------------------------------------------- $(TMP_DIR)\tk.res: \ @@ -830,7 +888,7 @@ $(TMP_DIR)\tk.res: \ !if exist("$(OUT_DIR)\depend.mk") !include "$(OUT_DIR)\depend.mk" -!message *** Dependency rules in effect. +!message *** Dependency rules in use. !else !message *** Dependency rules are not being used. !endif @@ -896,8 +954,13 @@ install-binaries: !if !$(STATIC_BUILD) @echo creating package index @type << > $(OUT_DIR)\pkgIndex.tcl -if {[catch {package present Tcl 8.5.0}]} { return } -package ifneeded Tk $(TK_PATCH_LEVEL) [list load [file join $$dir .. .. bin $(TKLIBNAME)] Tk] +if {[catch {package present Tcl $(TK_DOTVERSION).0}]} { return } +if {($$::tcl_platform(platform) eq "unix") && ([info exists ::env(DISPLAY)] + || ([info exists ::argv] && ("-display" in $$::argv)))} { + package ifneeded Tk $(TK_PATCH_LEVEL) [list load [file join $$dir .. .. bin libtk$(TK_DOTVERSION).dll] Tk] +} else { + package ifneeded Tk $(TK_PATCH_LEVEL) [list load [file join $$dir .. .. bin $(TKLIBNAME)] Tk] +} << @$(CPY) $(OUT_DIR)\pkgIndex.tcl "$(SCRIPT_INSTALL_DIR)\" !endif @@ -959,6 +1022,8 @@ clean: @echo Cleaning $(WINDIR)\versions.vc ... @if exist $(WINDIR)\versions.vc del $(WINDIR)\versions.vc +realclean: hose + hose: @echo Hosing $(OUT_DIR)\* ... @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) |