summaryrefslogtreecommitdiffstats
path: root/win/makefile.vc
diff options
context:
space:
mode:
Diffstat (limited to 'win/makefile.vc')
-rw-r--r--win/makefile.vc189
1 files changed, 127 insertions, 62 deletions
diff --git a/win/makefile.vc b/win/makefile.vc
index 2f60436..d84270d 100644
--- a/win/makefile.vc
+++ b/win/makefile.vc
@@ -1,15 +1,16 @@
-#------------------------------------------------------------------------------
+#------------------------------------------------------------- -*- makefile -*-
# makefile.vc --
#
# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
+#
# Copyright (c) 1995-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-2000 Ajuba Solutions.
# Copyright (c) 2001-2005 ActiveState Corporation.
# Copyright (c) 2001-2004 David Gravereaux.
+# Copyright (c) 2003-2008 Pat Thoyts.
#------------------------------------------------------------------------------
# Check to see we are configured to build with MSVC (MSDEVDIR, MSVCDIR or
@@ -41,23 +42,28 @@ the build instructions.
# turn on the 64-bit compiler, if your SDK has it.
#
# 3) Targets are:
-# release -- builds the core, the shell. (default)
-# core -- Only builds the core.
-# all -- builds everything.
-# test -- builds and runs the test suite.
-# tktest -- just builds the binaries for the test suite.
-# install -- installs the built binaries and libraries to $(INSTALLDIR)
+# release -- Builds the core, the shell. (default)
+# dlls -- Just builds the windows extensions.
+# shell -- Just builds the shell and the core.
+# core -- Only builds the core [tkXX.(dll|lib)].
+# all -- Builds everything.
+# test -- Builds and runs the test suite.
+# tktest -- Just builds the binaries for the test suite.
+# install -- Installs the built binaries and libraries to $(INSTALLDIR)
# as the root of the install tree.
-# cwish -- builds a console version of wish.
-# clean -- removes the contents of $(TMP_DIR)
-# hose -- removes the contents of $(TMP_DIR) and $(OUT_DIR)
-# genstubs -- rebuilds the Stubs table and support files (dev only).
+# cwish -- Builds a console version of wish.
+# tidy/clean/hose -- varying levels of cleaning.
+# genstubs -- Rebuilds the Stubs table and support files (dev only).
# depend -- Generates an accurate set of source dependancies for this
# makefile. Helpful to avoid problems when the sources are
# refreshed and you rebuild, but can "overbuild" when common
# headers like tkInt.h just get small changes.
-# winhelp -- builds the windows .hlp file for Tcl from the troff man
-# files.
+# htmlhelp -- Builds a Windows .chm help file for Tcl and Tk from the
+# troff manual pages found in $(ROOT)\doc. You need to
+# have installed the HTML Help Compiler package from Microsoft
+# to produce the .chm file.
+# winhelp -- Builds the windows .hlp file for Tcl from the troff man
+# files found in $(ROOT)\doc.
#
# 4) Macros usable on the commandline:
# TCLDIR=<path>
@@ -70,60 +76,65 @@ the build instructions.
# Sets where to install Tcl from the built binaries.
# C:\Progra~1\Tcl is assumed when not specified.
#
-# OPTS=static,msvcrt,linkexten,threads,symbols,profile,unchecked,none
+# OPTS=loimpact,msvcrt,nothreads,noxp,pdbs,profile,square,static,staticpkg,symbols,unchecked,none
# Sets special options for the core. The default is for none.
# Any combination of the above may be used (comma separated).
# 'none' will over-ride everything to nothing.
#
-# static = Builds a static library of the core instead of a
-# dll. The shell will be static (and large), as well.
-# msvcrt = Effects the static option only to switch it from
+# loimpact = Adds a flag for how NT treats the heap to keep memory
+# in use, low. This is said to impact alloc performance.
+# msvcrt = Affects the static option only to switch it from
# using libcmt(d) as the C runtime [by default] to
# msvcrt(d). This is useful for static embedding
# support.
+# nothreads= Turns off full multithreading support.
+# noxp = If you do not have the uxtheme.h header then you
+# cannot include support for XP themeing.
+# square = Include the demo square widget.
+# static = Builds a static library of the core instead of a
+# dll. The shell will be static (and large), as well.
# staticpkg= Affects the static option only to switch wishXX.exe
# to have the dde and reg extension linked inside it.
-# threads = Turns on full multithreading support.
-# thrdalloc= Use the thread allocator (shared global free pool).
-# symbols = Adds symbols for step debugging.
+# pdbs = Build detached symbols for release builds.
# profile = Adds profiling hooks. Map file is assumed.
-# loimpact = Adds a flag for how NT treats the heap to keep
-# memory in use, low. This is said to impact alloc
-# performance.
-# unchecked= Allows a symbols build to not use the debug
+# thrdalloc = Use the thread allocator (shared global free pool)
+# This is the default on threaded builds.
+# tclalloc = Use the old non-thread allocator
+# symbols = Debug build. Links to the debug C runtime, disables
+# optimizations and creates pdb symbols files.
+# unchecked = Allows a symbols build to not use the debug
# enabled runtime (msvcrt.dll not msvcrtd.dll
# or libcmt.lib not libcmtd.lib).
-# noxp = If you do not have the uxtheme.h header then you
-# cannot include support for XP themeing.
-# square = Include the demo square widget.
#
-# STATS=memdbg,compdbg,none
+# STATS=compdbg,memdbg,none
# Sets optional memory and bytecode compiler debugging code added
# to the core. The default is for none. Any combination of the
# above may be used (comma separated). 'none' will over-ride
# everything to nothing.
#
-# memdbg = Enables the debugging memory allocator.
# compdbg = Enables byte compilation logging.
+# memdbg = Enables the debugging memory allocator.
#
-# CHECKS=nodep,fullwarn,none
+# CHECKS=64bit,fullwarn,nodep,none
# Sets special macros for checking compatability.
#
-# nodep = Turns off compatability macros to ensure Tk isn't
-# being built with deprecated functions.
+# 64bit = Enable 64bit portability warnings (if available)
# fullwarn = Builds with full compiler and link warnings enabled.
# Very verbose.
+# nodep = Turns off compatability macros to ensure the core
+# isn't being built with deprecated functions.
#
-# MACHINE=(IX86|IA64|AMD64|ALPHA)
+# MACHINE=(ALPHA|AMD64|IA64|IX86)
# Set the machine type used for the compiler, linker, and
# resource compiler. This hook is needed to tell the tools
# when alternate platforms are requested. IX86 is the default
-# when not specified.
+# when not specified. If the CPU environment variable has been
+# set (ie: recent Platform SDK) then MACHINE is set from CPU.
#
# TMP_DIR=<path>
# OUT_DIR=<path>
# Hooks to allow the intermediate and output directories to be
-# changed. $(OUT_DIR) is assumed to be
+# changed. $(OUT_DIR) is assumed to be
# $(BINROOT)\(Release|Debug) based on if symbols are requested.
# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
#
@@ -171,7 +182,7 @@ Please `cd` to its location first.
!error $(MSG)
!endif
-PROJECT = tk
+PROJECT = tk
!include "rules.vc"
!if $(TCLINSTALL)
@@ -351,7 +362,7 @@ TKOBJS = \
$(TMP_DIR)\tkStubInit.obj \
$(TMP_DIR)\tkStubLib.obj \
$(TMP_DIR)\tkWindow.obj \
- $(TTK_OBJS) \
+ $(TTK_OBJS) \
!if !$(STATIC_BUILD)
$(TMP_DIR)\tk.res
!endif
@@ -392,7 +403,8 @@ TTK_OBJS = \
$(TMP_DIR)\ttkStubInit.obj
TKSTUBOBJS = \
- $(TMP_DIR)\tkStubLib.obj $(TMP_DIR)\ttkStubLib.obj
+ $(TMP_DIR)\tkStubLib.obj \
+ $(TMP_DIR)\ttkStubLib.obj
WINDIR = $(ROOT)\win
@@ -417,7 +429,7 @@ CONFIG_DEFS =-DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 \
-DTTK_SQUARE_WIDGET=1 \
!endif
-TK_DEFINES =-DBUILD_ttk $(OPTDEFINES) $(CONFIG_DEFS)
+TK_DEFINES =-DBUILD_ttk $(OPTDEFINES) $(CONFIG_DEFS) -Dinline=__inline
#---------------------------------------------------------------------
# Compile flags
@@ -465,7 +477,6 @@ CON_CFLAGS = $(cdebug) $(cflags) $(crt) -DCONSOLE
WISH_CFLAGS = $(BASE_CFLAGS) $(TK_DEFINES)
STUB_CFLAGS = $(cflags) $(cdebug) $(TK_DEFINES)
-
#---------------------------------------------------------------------
# Link flags
#---------------------------------------------------------------------
@@ -474,6 +485,9 @@ STUB_CFLAGS = $(cflags) $(cdebug) $(TK_DEFINES)
ldebug = -debug -debugtype:cv
!else
ldebug = -release -opt:ref -opt:icf,3
+!if $(SYMBOLS)
+ldebug = $(ldebug) -debug -debugtype:cv
+!endif
!endif
### Declarations common to all linker options
@@ -515,7 +529,7 @@ guilibs = $(baselibs) gdi32.lib
#---------------------------------------------------------------------
!if "$(TESTPAT)" != ""
-TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
+TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
!endif
@@ -543,9 +557,10 @@ test-classic: setup $(TKTEST) $(TKLIB) $(CAT32)
@set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
!endif
!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE"
- $(TKTEST) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) | $(CAT32)
+ $(DEBUGGER) $(TKTEST) "$(ROOT:\=/)/tests/all.tcl" $(TESTFLAGS) | $(CAT32)
!else
- $(TKTEST) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) | $(CAT32)
+ $(DEBUGGER) $(TKTEST) "$(ROOT:\=/)/tests/all.tcl" $(TESTFLAGS) > tests.log
+ type tests.log | more
!endif
test-ttk: setup $(TKTEST) $(TKLIB) $(CAT32)
@@ -558,9 +573,10 @@ test-ttk: setup $(TKTEST) $(TKLIB) $(CAT32)
@set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
!endif
!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE"
- $(TKTEST) "$(ROOT)/tests/ttk/all.tcl" $(TESTFLAGS) | $(CAT32)
+ $(DEBUGGER) $(TKTEST) "$(ROOT:\=/)/tests/ttk/all.tcl" $(TESTFLAGS) | $(CAT32)
!else
- $(TKTEST) "$(ROOT)/tests/ttk/all.tcl" $(TESTFLAGS) | $(CAT32)
+ $(DEBUGGER) $(TKTEST) "$(ROOT:\=/)/tests/ttk/all.tcl" $(TESTFLAGS) > tests.log
+ type tests.log | more
!endif
runtest: setup $(TKTEST) $(TKLIB) $(CAT32)
@@ -572,7 +588,7 @@ runtest: setup $(TKTEST) $(TKLIB) $(CAT32)
!else
@set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
!endif
- $(TKTEST)
+ $(DEBUGGER) $(TKTEST)
rundemo: setup $(TKTEST) $(TKLIB) $(CAT32)
@set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
@@ -583,7 +599,7 @@ rundemo: setup $(TKTEST) $(TKLIB) $(CAT32)
!else
@set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
!endif
- $(TKTEST) $(ROOT)\library\demos\widget
+ $(TKTEST) $(ROOT:\=/)\library\demos\widget
shell: setup $(WISH)
@set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
@@ -594,7 +610,7 @@ shell: setup $(WISH)
!else
@set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
!endif
- $(WISH) <<
+ $(DEBUGGER) $(WISH) <<
console show
<<
@@ -656,9 +672,8 @@ $(CAT32): $(_TCLDIR)\win\cat.c
$(link32) $(conlflags) -out:$@ -stack:16384 $(TMP_DIR)\cat.obj $(baselibs)
$(_VC_MANIFEST_EMBED_EXE)
-
#---------------------------------------------------------------------
-# Regenerate the stubs files.
+# Regenerate the stubs files. [Development use only]
#---------------------------------------------------------------------
genstubs:
@@ -672,9 +687,49 @@ genstubs:
#---------------------------------------------------------------------
-# Regenerate the windows help files.
+# Build the Windows HTML help file.
#---------------------------------------------------------------------
+# NOTE: you can define HHC on the command-line to override this
+!ifndef HHC
+HHC=""%ProgramFiles%\HTML Help Workshop\hhc.exe""
+!endif
+HTMLDIR=$(ROOT)\html
+HTMLBASE=TclTk$(VERSION)
+HHPFILE=$(HTMLDIR)\$(HTMLBASE).hhp
+CHMFILE=$(HTMLDIR)\$(HTMLBASE).chm
+
+htmlhelp: chmsetup $(CHMFILE)
+
+$(CHMFILE): $(DOCDIR)\*
+ @$(TCLSH) $(TOOLSDIR)\tcltk-man2html.tcl
+ @echo Compiling HTML help project
+ @$(HHC) <<$(HHPFILE) >NUL
+[OPTIONS]
+Compatibility=1.1 or later
+Compiled file=$(HTMLBASE).chm
+Display compile progress=no
+Error log file=$(HTMLBASE).log
+Language=0x409 English (United States)
+Title=Tcl/Tk $(DOT_VERSION) Help
+[FILES]
+contents.htm
+docs.css
+Keywords
+TclCmd
+TclLib
+TkCmd
+TkLib
+UserCmd
+<<
+
+chmsetup:
+ @if not exist $(HTMLDIR)\nul mkdir $(HTMLDIR)
+
+#-------------------------------------------------------------------------
+# Build the old-style Windows .hlp file
+#-------------------------------------------------------------------------
+
HLPBASE = $(PROJECT)$(TK_VERSION)
HELPFILE = $(OUT_DIR)\$(HLPBASE).hlp
HELPCNT = $(OUT_DIR)\$(HLPBASE).cnt
@@ -723,8 +778,8 @@ CreateButton(3, "Wiki", ExecFile("http://wiki.tcl.tk"))
CreateButton(4, "FAQ", ExecFile("http://www.purl.org/NET/Tcl-FAQ/"))
<<
cd $(MAKEDIR)
- $(CPY) "$(DOCTMP_DIR)\$(@B).hlp" "$(OUT_DIR)"
- $(CPY) "$(DOCTMP_DIR)\$(@B).cnt" "$(OUT_DIR)"
+ @$(CPY) "$(DOCTMP_DIR)\$(@B).hlp" "$(OUT_DIR)"
+ @$(CPY) "$(DOCTMP_DIR)\$(@B).cnt" "$(OUT_DIR)"
$(MAN2TCL): $(TCLTOOLSDIR)\$$(@B).c
$(cc32) $(TK_CFLAGS) -Fo$(@D)\ $(TCLTOOLSDIR)\$(@B).c
@@ -798,11 +853,15 @@ $(TMP_DIR)\tkStubLib.obj : $(GENERICDIR)\tkStubLib.c
$(TMP_DIR)\wish.exe.manifest: $(WINDIR)\wish.exe.manifest.in
@nmakehlp -s << $** >$@
@MACHINE@ $(MACHINE:IX86=X86)
-@TK_WIN_VERSION@ $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION).0.0
+@TK_WIN_VERSION@ $(TK_DOTVERSION).0.0
<<
#---------------------------------------------------------------------
-# Generate the makefile depedancies.
+# Generate the source dependencies. Having dependency rules will
+# improve incremental build accuracy without having to resort to a
+# full rebuild just because some non-global header file like
+# tclCompile.h was changed. These rules aren't needed when building
+# from scratch.
#---------------------------------------------------------------------
depend:
@@ -810,7 +869,7 @@ depend:
@echo Build tclsh first!
!else
set TCL_LIBRARY=$(TCL_LIBRARY)
- $(TCLSH) $(TCLTOOLSDIR)\mkdepend.tcl -vc32 -out:"$(OUT_DIR)\depend.mk" \
+ $(TCLSH) $(TCLTOOLSDIR:\=/)/mkdepend.tcl -vc32 -out:"$(OUT_DIR)\depend.mk" \
-passthru:"-DBUILD_tk $(TK_INCLUDES)" $(GENERICDIR),$$(GENERICDIR) \
$(WINDIR),$$(WINDIR) $(TTKDIR),$$(TTKDIR) $(XLIBDIR),$$(XLIBDIR) \
$(BITMAPDIR),$$(BITMAPDIR) @<<
@@ -818,9 +877,8 @@ $(TKOBJS)
<<
!endif
-
#---------------------------------------------------------------------
-# Dedependency rules
+# Dependency rules
#---------------------------------------------------------------------
$(TMP_DIR)\tk.res: \
@@ -830,7 +888,7 @@ $(TMP_DIR)\tk.res: \
!if exist("$(OUT_DIR)\depend.mk")
!include "$(OUT_DIR)\depend.mk"
-!message *** Dependency rules in effect.
+!message *** Dependency rules in use.
!else
!message *** Dependency rules are not being used.
!endif
@@ -896,8 +954,13 @@ install-binaries:
!if !$(STATIC_BUILD)
@echo creating package index
@type << > $(OUT_DIR)\pkgIndex.tcl
-if {[catch {package present Tcl 8.5.0}]} { return }
-package ifneeded Tk $(TK_PATCH_LEVEL) [list load [file join $$dir .. .. bin $(TKLIBNAME)] Tk]
+if {[catch {package present Tcl $(TK_DOTVERSION).0}]} { return }
+if {($$::tcl_platform(platform) eq "unix") && ([info exists ::env(DISPLAY)]
+ || ([info exists ::argv] && ("-display" in $$::argv)))} {
+ package ifneeded Tk $(TK_PATCH_LEVEL) [list load [file join $$dir .. .. bin libtk$(TK_DOTVERSION).dll] Tk]
+} else {
+ package ifneeded Tk $(TK_PATCH_LEVEL) [list load [file join $$dir .. .. bin $(TKLIBNAME)] Tk]
+}
<<
@$(CPY) $(OUT_DIR)\pkgIndex.tcl "$(SCRIPT_INSTALL_DIR)\"
!endif
@@ -959,6 +1022,8 @@ clean:
@echo Cleaning $(WINDIR)\versions.vc ...
@if exist $(WINDIR)\versions.vc del $(WINDIR)\versions.vc
+realclean: hose
+
hose:
@echo Hosing $(OUT_DIR)\* ...
@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)