diff options
Diffstat (limited to 'win/tcl.m4')
| -rwxr-xr-x | win/tcl.m4 | 258 |
1 files changed, 199 insertions, 59 deletions
@@ -3,50 +3,117 @@ # # Locate the tclConfig.sh file and perform a sanity check on # the Tcl compile flags -# Currently a no-op for Windows # # Arguments: -# PATCH_LEVEL The patch level for Tcl if any. +# none # # Results: # # Adds the following arguments to configure: # --with-tcl=... # -# Sets the following vars: -# TCL_BIN_DIR Full path to the tclConfig.sh file +# Defines the following vars: +# TCL_BIN_DIR Full path to the directory containing +# the tclConfig.sh file #------------------------------------------------------------------------ AC_DEFUN([SC_PATH_TCLCONFIG], [ - AC_MSG_CHECKING([the location of tclConfig.sh]) + # + # Ok, lets find the tcl configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tcl + # - if test -d ../../tcl8.4$1/win; then - TCL_BIN_DIR_DEFAULT=../../tcl8.4$1/win - elif test -d ../../tcl8.4/win; then - TCL_BIN_DIR_DEFAULT=../../tcl8.4/win - else - TCL_BIN_DIR_DEFAULT=../../tcl/win - fi + if test x"${no_tcl}" = x ; then + # we reset no_tcl in case something fails here + no_tcl=true + AC_ARG_WITH(tcl, [ --with-tcl directory containing tcl configuration (tclConfig.sh)], with_tclconfig=${withval}) + AC_MSG_CHECKING([for Tcl configuration]) + AC_CACHE_VAL(ac_cv_c_tclconfig,[ + + # First check to see if --with-tcl was specified. + if test x"${with_tclconfig}" != x ; then + case "${with_tclconfig}" in + */tclConfig.sh ) + if test -f "${with_tclconfig}"; then + AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) + with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tclconfig}/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" + else + AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) + fi + fi - AC_ARG_WITH(tcl, [ --with-tcl=DIR use Tcl 8.4 binaries from DIR], - TCL_BIN_DIR=$withval, TCL_BIN_DIR=`cd $TCL_BIN_DIR_DEFAULT; pwd`) - if test ! -d $TCL_BIN_DIR; then - AC_MSG_ERROR(Tcl directory $TCL_BIN_DIR does not exist) - fi - if test ! -f $TCL_BIN_DIR/tclConfig.sh; then - if test ! -f $TCL_BIN_DIR/../unix/tclConfig.sh; then - AC_MSG_ERROR(There is no tclConfig.sh in $TCL_BIN_DIR: perhaps you did not specify the Tcl *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?) + # then check for a private Tcl installation + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ../tcl \ + `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tcl \ + `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tcl \ + `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ${srcdir}/../tcl \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/win/tclConfig.sh" ; then + ac_cv_c_tclconfig="`(cd $i/win; pwd)`" + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tclconfig}" = x ; then + TCL_BIN_DIR="# no Tcl configs found" + AC_MSG_ERROR([Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh]) + else + no_tcl= + TCL_BIN_DIR="${ac_cv_c_tclconfig}" + AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh]) fi - TCL_BIN_DIR=`cd ${TCL_BIN_DIR}/../unix; pwd` fi - AC_MSG_RESULT($TCL_BIN_DIR/tclConfig.sh) ]) #------------------------------------------------------------------------ # SC_PATH_TKCONFIG -- # # Locate the tkConfig.sh file -# Currently a no-op for Windows # # Arguments: # none @@ -56,31 +123,102 @@ AC_DEFUN([SC_PATH_TCLCONFIG], [ # Adds the following arguments to configure: # --with-tk=... # -# Sets the following vars: -# TK_BIN_DIR Full path to the tkConfig.sh file +# Defines the following vars: +# TK_BIN_DIR Full path to the directory containing +# the tkConfig.sh file #------------------------------------------------------------------------ AC_DEFUN([SC_PATH_TKCONFIG], [ - AC_MSG_CHECKING([the location of tkConfig.sh]) + # + # Ok, lets find the tk configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tk + # - if test -d ../../tk8.4$1/win; then - TK_BIN_DIR_DEFAULT=../../tk8.4$1/win - elif test -d ../../tk8.4/win; then - TK_BIN_DIR_DEFAULT=../../tk8.4/win - else - TK_BIN_DIR_DEFAULT=../../tk/win - fi + if test x"${no_tk}" = x ; then + # we reset no_tk in case something fails here + no_tk=true + AC_ARG_WITH(tk, [ --with-tk directory containing tk configuration (tkConfig.sh)], with_tkconfig=${withval}) + AC_MSG_CHECKING([for Tk configuration]) + AC_CACHE_VAL(ac_cv_c_tkconfig,[ + + # First check to see if --with-tkconfig was specified. + if test x"${with_tkconfig}" != x ; then + case "${with_tkconfig}" in + */tkConfig.sh ) + if test -f "${with_tkconfig}"; then + AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) + with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`" + fi ;; + esac + if test -f "${with_tkconfig}/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`" + else + AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) + fi + fi - AC_ARG_WITH(tk, [ --with-tk=DIR use Tk 8.4 binaries from DIR], - TK_BIN_DIR=$withval, TK_BIN_DIR=`cd $TK_BIN_DIR_DEFAULT; pwd`) - if test ! -d $TK_BIN_DIR; then - AC_MSG_ERROR(Tk directory $TK_BIN_DIR does not exist) - fi - if test ! -f $TK_BIN_DIR/tkConfig.sh; then - AC_MSG_ERROR(There is no tkConfig.sh in $TK_BIN_DIR: perhaps you did not specify the Tk *build* directory (not the toplevel Tk directory) or you forgot to configure Tk?) - fi + # then check for a private Tk library + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ../tk \ + `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tk \ + `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tk \ + `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + done + fi - AC_MSG_RESULT([$TK_BIN_DIR/tkConfig.sh]) + # check in a few common install locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i; pwd)`" + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ${srcdir}/../tk \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/win/tkConfig.sh" ; then + ac_cv_c_tkconfig="`(cd $i/win; pwd)`" + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tkconfig}" = x ; then + TK_BIN_DIR="# no Tk configs found" + AC_MSG_ERROR([Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh]) + else + no_tk= + TK_BIN_DIR="${ac_cv_c_tkconfig}" + AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh]) + fi + fi ]) #------------------------------------------------------------------------ @@ -103,13 +241,13 @@ AC_DEFUN([SC_PATH_TKCONFIG], [ #------------------------------------------------------------------------ AC_DEFUN([SC_LOAD_TCLCONFIG], [ - AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh]) + AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh]) - if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then + if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then AC_MSG_RESULT([loading]) - . $TCL_BIN_DIR/tclConfig.sh + . "${TCL_BIN_DIR}/tclConfig.sh" else - AC_MSG_RESULT([file not found]) + AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh]) fi # @@ -158,7 +296,6 @@ AC_DEFUN([SC_LOAD_TCLCONFIG], [ # SC_LOAD_TKCONFIG -- # # Load the tkConfig.sh file -# Currently a no-op for Windows # # Arguments: # @@ -172,13 +309,13 @@ AC_DEFUN([SC_LOAD_TCLCONFIG], [ #------------------------------------------------------------------------ AC_DEFUN([SC_LOAD_TKCONFIG], [ - AC_MSG_CHECKING([for existence of $TK_BIN_DIR/tkConfig.sh]) + AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) - if test -f "$TK_BIN_DIR/tkConfig.sh" ; then + if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then AC_MSG_RESULT([loading]) - . $TK_BIN_DIR/tkConfig.sh + . "${TK_BIN_DIR}/tkConfig.sh" else - AC_MSG_RESULT([could not find $TK_BIN_DIR/tkConfig.sh]) + AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) fi @@ -211,8 +348,8 @@ AC_DEFUN([SC_LOAD_TKCONFIG], [ AC_DEFUN([SC_ENABLE_SHARED], [ AC_MSG_CHECKING([how to build libraries]) AC_ARG_ENABLE(shared, - [ --enable-shared build and link with shared libraries [--enable-shared]], - [tcl_ok=$enableval], [tcl_ok=yes]) + [ --enable-shared build and link with shared libraries (default: on)], + [tcl_ok=$enableval], [tcl_ok=yes]) if test "${enable_shared+set}" = set; then enableval="$enable_shared" @@ -227,7 +364,7 @@ AC_DEFUN([SC_ENABLE_SHARED], [ else AC_MSG_RESULT([static]) SHARED_BUILD=0 - AC_DEFINE(STATIC_BUILD) + AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?]) fi ]) @@ -250,7 +387,7 @@ AC_DEFUN([SC_ENABLE_SHARED], [ AC_DEFUN([SC_ENABLE_THREADS], [ AC_MSG_CHECKING(for building with threads) - AC_ARG_ENABLE(threads, [ --enable-threads build with threads], + AC_ARG_ENABLE(threads, [ --enable-threads build with threads (default: off)], [tcl_ok=$enableval], [tcl_ok=no]) if test "$tcl_ok" = "yes"; then @@ -270,7 +407,7 @@ AC_DEFUN([SC_ENABLE_THREADS], [ #------------------------------------------------------------------------ # SC_ENABLE_SYMBOLS -- # -# Specify if debugging symbols should be used +# Specify if debugging symbols should be used. # Memory (TCL_MEM_DEBUG) and compile (TCL_COMPILE_DEBUG) debugging # can also be enabled. # @@ -297,7 +434,7 @@ AC_DEFUN([SC_ENABLE_THREADS], [ AC_DEFUN([SC_ENABLE_SYMBOLS], [ AC_MSG_CHECKING([for build with symbols]) - AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols [--disable-symbols]], [tcl_ok=$enableval], [tcl_ok=no]) + AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols (default: off)], [tcl_ok=$enableval], [tcl_ok=no]) # FIXME: Currently, LDFLAGS_DEFAULT is not used, it should work like CFLAGS_DEFAULT. if test "$tcl_ok" = "no"; then CFLAGS_DEFAULT='$(CFLAGS_OPTIMIZE)' @@ -1065,8 +1202,11 @@ print("manifest needed") # Could do a CHECK_PROG for mt, but should always be with MSVC8+ # Could add 'if test -f' check, but manifest should be created # in this compiler case - VC_MANIFEST_EMBED_DLL="mt.exe -nologo -manifest \[$]@.manifest $1 -outputresource:\[$]@\;2" - VC_MANIFEST_EMBED_EXE="mt.exe -nologo -manifest \[$]@.manifest $1 -outputresource:\[$]@\;1" + # Add in a manifest argument that may be specified + # XXX Needs improvement so that the test for existence accounts + # XXX for a provided (known) manifest + VC_MANIFEST_EMBED_DLL="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest $1 -outputresource:\[$]@\;2 ; fi" + VC_MANIFEST_EMBED_EXE="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest $1 -outputresource:\[$]@\;1 ; fi" result=yes if test "x$1" != x ; then result="yes ($1)" |