From b953acd1adcee2fe7ed421057e3777dfc262d8a3 Mon Sep 17 00:00:00 2001 From: fvogel Date: Mon, 29 Jun 2015 21:57:04 +0000 Subject: Fixed bug [2886436fff] - [.txt delete] deletes before start index - This is option 2: don't change the behavior of the text widget, but document it better. --- doc/text.n | 7 +++++-- generic/tkText.c | 14 +++++++++----- 2 files changed, 14 insertions(+), 7 deletions(-) diff --git a/doc/text.n b/doc/text.n index b11363d..1ccadbb 100644 --- a/doc/text.n +++ b/doc/text.n @@ -1216,8 +1216,11 @@ If \fIindex2\fR does not specify a position later in the text than \fIindex1\fR then no characters are deleted. If \fIindex2\fR is not specified then the single character at \fIindex1\fR is deleted. -It is not allowable to delete characters in a way that would leave -the text without a newline as the last character. +Attempts to delete characters in a way that would leave +the text without a newline as the last character will be tweaked by the +text widget to avoid this. In particular, attempts to delete complete +lines of text up to the end of the text will result in +deletion of the newline character just preceding \fIindex1\fR. The command returns an empty string. If more indices are given, multiple ranges of text will be deleted. All indices are first checked for validity before any deletions are made. diff --git a/generic/tkText.c b/generic/tkText.c index 139e71d..5042582 100644 --- a/generic/tkText.c +++ b/generic/tkText.c @@ -3001,11 +3001,15 @@ DeleteIndexRange( * file (just before the dummy line) is being deleted, then back up index * to just before the newline. If there is a newline just before the first * character being deleted, then back up the first index too, so that an - * even number of lines gets deleted. Furthermore, remove any tags that - * are present on the newline that isn't going to be deleted after all - * (this simulates deleting the newline and then adding a "clean" one back - * again). Note that index1 and index2 might now be equal again which - * means that no text will be deleted but tags might be removed. + * even number of lines gets deleted. The idea is that a deletion + * involving a range starting at a line start and including the final \n + * (i.e. index2 is "end") is an attempt to delete complete lines, so the + * \n before the deleted block shall become the new final \n. Furthermore, + * remove any tags that are present on the newline that isn't going to be + * deleted after all (this simulates deleting the newline and then adding + * a "clean" one back again). Note that index1 and index2 might now be + * equal again which means that no text will be deleted but tags might be + * removed. */ line1 = TkBTreeLinesTo(textPtr, index1.linePtr); -- cgit v0.12 From 6b9f74b94131d093483c64f7ceabf120c0d7cafc Mon Sep 17 00:00:00 2001 From: fvogel Date: Tue, 14 Jul 2015 19:18:58 +0000 Subject: Tried to be even clearer. --- doc/text.n | 7 ++++--- generic/tkText.c | 19 +++++++++---------- 2 files changed, 13 insertions(+), 13 deletions(-) diff --git a/doc/text.n b/doc/text.n index 1ccadbb..5b7804a 100644 --- a/doc/text.n +++ b/doc/text.n @@ -1218,9 +1218,10 @@ If \fIindex2\fR is not specified then the single character at \fIindex1\fR is deleted. Attempts to delete characters in a way that would leave the text without a newline as the last character will be tweaked by the -text widget to avoid this. In particular, attempts to delete complete -lines of text up to the end of the text will result in -deletion of the newline character just preceding \fIindex1\fR. +text widget to avoid this. In particular, deletion of complete lines of +text up to the end of the text will also delete the newline character just +before the deleted block so that it is replaced by the new final newline +of the text widget. The command returns an empty string. If more indices are given, multiple ranges of text will be deleted. All indices are first checked for validity before any deletions are made. diff --git a/generic/tkText.c b/generic/tkText.c index 5042582..eb2d77a 100644 --- a/generic/tkText.c +++ b/generic/tkText.c @@ -3000,16 +3000,15 @@ DeleteIndexRange( * dummy empty line at the end of the text. If the final newline of the * file (just before the dummy line) is being deleted, then back up index * to just before the newline. If there is a newline just before the first - * character being deleted, then back up the first index too, so that an - * even number of lines gets deleted. The idea is that a deletion - * involving a range starting at a line start and including the final \n - * (i.e. index2 is "end") is an attempt to delete complete lines, so the - * \n before the deleted block shall become the new final \n. Furthermore, - * remove any tags that are present on the newline that isn't going to be - * deleted after all (this simulates deleting the newline and then adding - * a "clean" one back again). Note that index1 and index2 might now be - * equal again which means that no text will be deleted but tags might be - * removed. + * character being deleted, then back up the first index too. The idea is + * that a deletion involving a range starting at a line start and + * including the final \n (i.e. index2 is "end") is an attempt to delete + * complete lines, so the \n before the deleted block shall become the new + * final \n. Furthermore, remove any tags that are present on the newline + * that isn't going to be deleted after all (this simulates deleting the + * newline and then adding a "clean" one back again). Note that index1 and + * index2 might now be equal again which means that no text will be + * deleted but tags might be removed. */ line1 = TkBTreeLinesTo(textPtr, index1.linePtr); -- cgit v0.12 From d71ad7c875011c2a2316b2ddea67184dbc874e2b Mon Sep 17 00:00:00 2001 From: dgp Date: Fri, 23 Oct 2015 15:35:13 +0000 Subject: Bump to release number 8.5.19 --- README | 2 +- generic/tk.h | 4 ++-- library/tk.tcl | 2 +- unix/configure | 2 +- unix/configure.in | 2 +- unix/tk.spec | 2 +- win/configure | 2 +- win/configure.in | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-) diff --git a/README b/README index 6fad4bb..4d1dc24 100644 --- a/README +++ b/README @@ -1,5 +1,5 @@ README: Tk - This is the Tk 8.5.18 source distribution. + This is the Tk 8.5.19 source distribution. http://sourceforge.net/projects/tcl/files/Tcl/ You can get any source release of Tk from the URL above. diff --git a/generic/tk.h b/generic/tk.h index e356ce5..bf43b41 100644 --- a/generic/tk.h +++ b/generic/tk.h @@ -59,10 +59,10 @@ extern "C" { #define TK_MAJOR_VERSION 8 #define TK_MINOR_VERSION 5 #define TK_RELEASE_LEVEL TCL_FINAL_RELEASE -#define TK_RELEASE_SERIAL 18 +#define TK_RELEASE_SERIAL 19 #define TK_VERSION "8.5" -#define TK_PATCH_LEVEL "8.5.18" +#define TK_PATCH_LEVEL "8.5.19" /* * A special definition used to allow this header file to be included from diff --git a/library/tk.tcl b/library/tk.tcl index a9db8cb..64fb6f6 100644 --- a/library/tk.tcl +++ b/library/tk.tcl @@ -15,7 +15,7 @@ package require Tcl 8.5 ;# Guard against [source] in an 8.4- interp before # Insist on running with compatible version of Tcl package require Tcl 8.5.0 # Verify that we have Tk binary and script components from the same release -package require -exact Tk 8.5.18 +package require -exact Tk 8.5.19 # Create a ::tk namespace namespace eval ::tk { diff --git a/unix/configure b/unix/configure index 10e2b48..41380f8 100755 --- a/unix/configure +++ b/unix/configure @@ -1338,7 +1338,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu TK_VERSION=8.5 TK_MAJOR_VERSION=8 TK_MINOR_VERSION=5 -TK_PATCH_LEVEL=".18" +TK_PATCH_LEVEL=".19" VERSION=${TK_VERSION} LOCALES="cs da de el en en_gb eo es fr hu it nl pl pt ru sv" diff --git a/unix/configure.in b/unix/configure.in index bab5d8a..d4a8c28 100644 --- a/unix/configure.in +++ b/unix/configure.in @@ -25,7 +25,7 @@ m4_ifdef([SC_USE_CONFIG_HEADERS], [ TK_VERSION=8.5 TK_MAJOR_VERSION=8 TK_MINOR_VERSION=5 -TK_PATCH_LEVEL=".18" +TK_PATCH_LEVEL=".19" VERSION=${TK_VERSION} LOCALES="cs da de el en en_gb eo es fr hu it nl pl pt ru sv" diff --git a/unix/tk.spec b/unix/tk.spec index fd51c52..02bb625 100644 --- a/unix/tk.spec +++ b/unix/tk.spec @@ -4,7 +4,7 @@ Name: tk Summary: Tk graphical toolkit for the Tcl scripting language. -Version: 8.5.18 +Version: 8.5.19 Release: 2 License: BSD Group: Development/Languages diff --git a/win/configure b/win/configure index bd48382..5c16b5b 100755 --- a/win/configure +++ b/win/configure @@ -1312,7 +1312,7 @@ SHELL=/bin/sh TK_VERSION=8.5 TK_MAJOR_VERSION=8 TK_MINOR_VERSION=5 -TK_PATCH_LEVEL=".18" +TK_PATCH_LEVEL=".19" VER=$TK_MAJOR_VERSION$TK_MINOR_VERSION #------------------------------------------------------------------------ diff --git a/win/configure.in b/win/configure.in index 4634bb6..9dd7fb8 100644 --- a/win/configure.in +++ b/win/configure.in @@ -14,7 +14,7 @@ SHELL=/bin/sh TK_VERSION=8.5 TK_MAJOR_VERSION=8 TK_MINOR_VERSION=5 -TK_PATCH_LEVEL=".18" +TK_PATCH_LEVEL=".19" VER=$TK_MAJOR_VERSION$TK_MINOR_VERSION #------------------------------------------------------------------------ -- cgit v0.12 From 805fcdaf248860dc18393f6057e20658717c2456 Mon Sep 17 00:00:00 2001 From: dgp Date: Fri, 23 Oct 2015 18:49:37 +0000 Subject: update changes --- changes | 45 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/changes b/changes index d9d34a3..df3ab72 100644 --- a/changes +++ b/changes @@ -6987,3 +6987,48 @@ Tk Cocoa 2.0: App Store enabled (walzer,culler,desmera,owen,nyberg,reincke) *** POTENTIAL INCOMPATIBILITY *** --- Released 8.5.18, March 6, 2015 --- http://core.tcl.tk/tk/ for details + +2015-03-10 (bug) Cocoa: premature image free crash (walzer) + +2015-03-15 (bug) Cocoa: wish launches in front. [focus -force] works (culler) + +2015-04-09 (bug)[e4ed00] [$text index "1.0 display wordstart"] crash (vogel) + +2015-04-09 (bug)[562118] Unicode support of "wordstart" modifier (vogel) + +2015-05-05 (bug)[06c3fc] PNG alpha error corrupted output file (gauthier,porter) + +2015-05-24 (bug)[53f8fc] panedwindow geometry management (vogel) + +2015-05-26 (bug)[1641721] tk_getOpenFile symlink display doubled (nijtmans) + +2015-06-01 (bug)[d7bad5][2368195][3592454][1714535][1292219][3592454] + panedwindow fixes (vogel) + +2015-06-25 (bug)[805cff] Tk_ConfigureWidget() segfault (aspect,nijtmans) + +2015-07-13 (bug)[3f179a] Text widget crash with elided text (vogel) + +2015-07-16 (bug)[2886436] Stop [$text delete] acting before start index (vogel) + +2015-07-28 (bug)[1236306] TraverseToMenu error bound to toplevel destroy (vogel) + +2015-08-20 (bug)[00189c] MSVC 14: semi-static UCRT support (dower,nijtmans) + +2015-09-29 (bug)[1501749] Crash embedded window delete bound to (vogel) + +2015-10-08 (new feature)[TIP 437] New panedwindow options (vogel) + +2015-10-09 (bug)[1669632] [text] autoseparator placement (nash,vogel) + +2015-10-09 (bug)[2262711] [text] RE search Unicode+elided (kaitzschu,vogel) + +2015-10-09 (bug)[1815161] [$text count -ypixels] needs management (vogel) + +2015-10-22 (bug)[1520118] Document spinbox validate expectations (vogel) + +2015-10-22 (bug)[1414025] $entry insertion cursor visibility (vogel) + +Tk Cocoa 2.0: More drawing internals refinements (culler,walzer) + +--- Released 8.5.19, December 1, 2015 --- http://core.tcl.tk/tk/ for details -- cgit v0.12 From 5f7fc554638bca715178872239e12d3af70873e7 Mon Sep 17 00:00:00 2001 From: dgp Date: Thu, 21 Jan 2016 20:04:18 +0000 Subject: Update changes file. --- changes | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/changes b/changes index 37cf0bd..6a5d4d7 100644 --- a/changes +++ b/changes @@ -7055,6 +7055,20 @@ Tk Cocoa 2.0: App Store enabled (walzer,culler,desmera,owen,nyberg,reincke) 2015-12-19 (bug)[793909] -textvariable handle undefined namespace (vogel) +2015-12-26 (bug)[2f78c7] crash with [text] and [tablelist] (vogel) + +2016-01-06 (bug)[1288433,3102228] <> misfires (vogel) + +2016-01-08 (bug)[1510538] initial scrollbar width (vogel,nijtmans) + +2016-01-08 (bug)[1305128] event not received by scrollbar (vogel,nijtmans) + +2016-01-09 (bug)[1927212] Mousewheel/scrollbar bindings (vogel) + +2016-01-11 (bug)[63c354] Cocoa message boxes (culler) + +2016-01-12 (bug)[2049429] get more $text options from database (vogel) + Tk Cocoa 2.0: More drawing internals refinements (culler,walzer) --- Released 8.5.19, January 31, 2016 --- http://core.tcl.tk/tk/ for details -- cgit v0.12 From 6c9bfa9fd65f656771dfae771ae084c936bffcc7 Mon Sep 17 00:00:00 2001 From: "jan.nijtmans" Date: Mon, 8 Feb 2016 15:52:53 +0000 Subject: =?UTF-8?q?(cherry-pick):=20Fix=20[06c14339060ba9ae]:=20Text=20wid?= =?UTF-8?q?get=20crash=20during=20delete.=20Thanks=20to=20Fran=C3=A7ois=20?= =?UTF-8?q?Vogel=20for=20the=20implementation=20and=20Brian=20Griffin=20fo?= =?UTF-8?q?r=20all=20his=20help=20getting=20this=20figured=20out.?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- generic/tkTextDisp.c | 8 +++----- tests/textDisp.test | 3 +-- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/generic/tkTextDisp.c b/generic/tkTextDisp.c index 10f6414..91642f9 100644 --- a/generic/tkTextDisp.c +++ b/generic/tkTextDisp.c @@ -4683,6 +4683,9 @@ TextChanged( */ lastPtr = FindDLine(textPtr, dInfoPtr->dLinePtr, &rounded); + while ((lastPtr != NULL) && (TkTextIndexCmp(&lastPtr->index, &rounded) < 0)) { + lastPtr = lastPtr->nextPtr; + } /* * At least one display line is supposed to change. This makes the @@ -4699,11 +4702,6 @@ TextChanged( } } - while ((lastPtr != NULL) - && (lastPtr->index.linePtr == index2Ptr->linePtr)) { - lastPtr = lastPtr->nextPtr; - } - /* * Delete all the DLines from firstPtr up to but not including lastPtr. */ diff --git a/tests/textDisp.test b/tests/textDisp.test index 6f26457..532caf4 100644 --- a/tests/textDisp.test +++ b/tests/textDisp.test @@ -1191,8 +1191,7 @@ test textDisp-8.12 {TkTextChanged, moving the insert cursor redraws only past an # because during (b) findDLine cannot return the display line the # cursor is in since this display line was just unlinked in (a). } {{8.0 9.0} {8.0 12.0} {8.0 12.0} {3.0 8.0} {2.0 3.0}} - -test textDisp-8.13 {TkTextChanged, [06c1433906]} { +test textDisp-8.13 {TkTextChanged, used to crash, see [06c1433906]} { .t delete 1.0 end .t insert 1.0 \nLine1\nLine2\n update -- cgit v0.12 From e9eb040566b7acbcd65658273c897ca92f28e961 Mon Sep 17 00:00:00 2001 From: dgp Date: Mon, 8 Feb 2016 20:44:22 +0000 Subject: update release date --- changes | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/changes b/changes index 45d9411..a752d10 100644 --- a/changes +++ b/changes @@ -7029,8 +7029,6 @@ Tk Cocoa 2.0: App Store enabled (walzer,culler,desmera,owen,nyberg,reincke) 2015-10-22 (bug)[1414025] $entry insertion cursor visibility (vogel) -2015-10-25 (bug)[477949] Unicode-enable [option readfile] (androwish,nijtmans) - 2015-10-26 (bug) PNG rendering on El Capitan (meier,walzer) 2015-11-08 (bug)[2160206] menubutton panic (vogel) @@ -7073,4 +7071,4 @@ Tk Cocoa 2.0: App Store enabled (walzer,culler,desmera,owen,nyberg,reincke) Tk Cocoa 2.0: More drawing internals refinements (culler,walzer) ---- Released 8.5.19, January 31, 2016 --- http://core.tcl.tk/tk/ for details +--- Released 8.5.19, February 12, 2016 --- http://core.tcl.tk/tk/ for details -- cgit v0.12 From e07cc72f16cbe99171e74b22132575f9827d298e Mon Sep 17 00:00:00 2001 From: fvogel Date: Mon, 8 Feb 2016 21:47:37 +0000 Subject: Corrected indentation + added an explanatory comment (cherrypicked [1121252f]) --- generic/tkTextDisp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/generic/tkTextDisp.c b/generic/tkTextDisp.c index 91642f9..559fbf7 100644 --- a/generic/tkTextDisp.c +++ b/generic/tkTextDisp.c @@ -5176,7 +5176,10 @@ TkTextSetYView( dInfoPtr->newTopPixelOffset = 0; goto scheduleUpdate; - } + } + /* + * The line is already on screen, with no need to scroll. + */ return; } } -- cgit v0.12 From cfda4cad423c9d190e8ef313abb2fde96fac95ec Mon Sep 17 00:00:00 2001 From: fvogel Date: Mon, 8 Feb 2016 22:06:39 +0000 Subject: Fixed (with a real fix this time) bug [06c1433906] - Text widget crash during delete (cherrypicked [48cf3656d9]) --- generic/tkTextDisp.c | 57 +++++++++++++++++++++++++++++++++++++--------------- tests/textDisp.test | 13 ++---------- 2 files changed, 43 insertions(+), 27 deletions(-) diff --git a/generic/tkTextDisp.c b/generic/tkTextDisp.c index 559fbf7..68c09fc 100644 --- a/generic/tkTextDisp.c +++ b/generic/tkTextDisp.c @@ -4683,9 +4683,6 @@ TextChanged( */ lastPtr = FindDLine(textPtr, dInfoPtr->dLinePtr, &rounded); - while ((lastPtr != NULL) && (TkTextIndexCmp(&lastPtr->index, &rounded) < 0)) { - lastPtr = lastPtr->nextPtr; - } /* * At least one display line is supposed to change. This makes the @@ -4806,16 +4803,9 @@ TextRedrawTag( /* * Round up the starting position if it's before the first line visible on - * the screen (we only care about what's on the screen). Beware that the - * display info structure might need update, for instance if we arrived - * here from an 'after idle' script removing tags in a range whose - * display lines (and dInfo) were partially invalidated by a previous - * delete operation in the text widget. + * the screen (we only care about what's on the screen). */ - if (dInfoPtr->flags & DINFO_OUT_OF_DATE) { - UpdateDisplayInfo(textPtr); - } dlPtr = dInfoPtr->dLinePtr; if (dlPtr == NULL) { return; @@ -6600,6 +6590,7 @@ FindDLine( CONST TkTextIndex *indexPtr)/* Index of desired character. */ { DLine *dlPtrPrev; + TkTextIndex indexPtr2; if (dlPtr == NULL) { return NULL; @@ -6624,24 +6615,58 @@ FindDLine( dlPtrPrev = dlPtr; dlPtr = dlPtr->nextPtr; if (dlPtr == NULL) { - TkTextIndex indexPtr2; /* * We're past the last display line, either because the desired * index lies past the visible text, or because the desired index - * is on the last display line showing the last logical line. + * is on the last display line. */ indexPtr2 = dlPtrPrev->index; TkTextIndexForwBytes(textPtr, &indexPtr2, dlPtrPrev->byteCount, &indexPtr2); if (TkTextIndexCmp(&indexPtr2,indexPtr) > 0) { + /* + * The desired index is on the last display line. + * --> return this display line. + */ dlPtr = dlPtrPrev; - break; } else { - return NULL; + /* + * The desired index is past the visible text. There is no + * display line displaying something at the desired index. + * --> return NULL. + */ } + break; } if (TkTextIndexCmp(&dlPtr->index,indexPtr) > 0) { - dlPtr = dlPtrPrev; + /* + * If we're here then we would normally expect that: + * dlPtrPrev->index <= indexPtr < dlPtr->index + * i.e. we have found the searched display line being dlPtr. + * However it is possible that some DLines were unlinked + * previously, leading to a situation where going through + * the list of display lines skips display lines that did + * exist just a moment ago. + */ + indexPtr2 = dlPtrPrev->index; + TkTextIndexForwBytes(textPtr, &indexPtr2, dlPtrPrev->byteCount, + &indexPtr2); + if (TkTextIndexCmp(&indexPtr2,indexPtr) > 0) { + /* + * Confirmed: + * dlPtrPrev->index <= indexPtr < dlPtr->index + * --> return dlPtrPrev. + */ + dlPtr = dlPtrPrev; + } else { + /* + * The last (rightmost) index shown by dlPtrPrev is still + * before the desired index. This may be because there was + * previously a display line between dlPtrPrev and dlPtr + * and this display line has been unlinked. + * --> return dlPtr. + */ + } break; } } diff --git a/tests/textDisp.test b/tests/textDisp.test index 532caf4..885c940 100644 --- a/tests/textDisp.test +++ b/tests/textDisp.test @@ -1181,19 +1181,10 @@ test textDisp-8.12 {TkTextChanged, moving the insert cursor redraws only past an .t mark set insert 3.8 ; # within the same line update lappend res $tk_textRedraw - # This last one is tricky: correct result really is {2.0 3.0} when - # calling .t mark set insert, two calls to TkTextChanged are done: - # (a) to redraw the line of the past position of the cursor - # (b) to redraw the line of the new position of the cursor - # During (a) the display line showing the cursor gets unlinked, - # which leads TkTextChanged in (b) to schedule a redraw starting - # one line _before_ the line containing the insert cursor. This is - # because during (b) findDLine cannot return the display line the - # cursor is in since this display line was just unlinked in (a). -} {{8.0 9.0} {8.0 12.0} {8.0 12.0} {3.0 8.0} {2.0 3.0}} +} {{8.0 9.0} {8.0 12.0} {8.0 12.0} {3.0 8.0} {3.0 4.0}} test textDisp-8.13 {TkTextChanged, used to crash, see [06c1433906]} { .t delete 1.0 end - .t insert 1.0 \nLine1\nLine2\n + .t insert 1.0 \nLine2\nLine3\n update .t insert 3.0 "" .t delete 1.0 2.0 -- cgit v0.12 From 301474e0cb79bc9057a9bce0d96a595194eb3256 Mon Sep 17 00:00:00 2001 From: "jan.nijtmans" Date: Tue, 9 Feb 2016 09:24:31 +0000 Subject: (cherry-pick): Fix [62a5ba7474]: tk 'make install' fails on Mac OS 10.11 --- macosx/GNUmakefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/macosx/GNUmakefile b/macosx/GNUmakefile index f3299e2..a69e9d9 100644 --- a/macosx/GNUmakefile +++ b/macosx/GNUmakefile @@ -116,7 +116,7 @@ TCL_FRAMEWORK_DIR := ${TCL_BUILD_DIR}/.. MAKE_VARS := else TCL_DIR := ${TCL_FRAMEWORK_DIR}/Tcl.framework -TCL_EXE := ${TCLSH_DIR}/tclsh${TCL_VERSION} +TCL_EXE := ${TCLSH_DIR}/bin/tclsh${TCL_VERSION} MAKE_VARS := TCL_EXE export DYLD_FRAMEWORK_PATH := ${TCL_FRAMEWORK_DIR} endif -- cgit v0.12 From 199597ae00067ebb743923a3958f7543e64507fe Mon Sep 17 00:00:00 2001 From: "jan.nijtmans" Date: Tue, 9 Feb 2016 09:49:21 +0000 Subject: (cherry-pick): Slightly more logical fix for [62a5ba7474]: tk 'make install' fails on Mac OS 10.11, which doesn't change the meaning of TCLSH_DIR --- macosx/GNUmakefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/macosx/GNUmakefile b/macosx/GNUmakefile index a69e9d9..46f76d5 100644 --- a/macosx/GNUmakefile +++ b/macosx/GNUmakefile @@ -35,7 +35,7 @@ MANDIR ?= ${PREFIX}/man TCL_BUILD_DIR ?= ${BUILD_DIR}/tcl/${BUILD_STYLE} # location of installed tcl, only used if tcl in TCL_BUILD_DIR can't be found TCL_FRAMEWORK_DIR ?= /Library/Frameworks -TCLSH_DIR ?= ${PREFIX} +TCLSH_DIR ?= ${PREFIX}/bin # set to non-empty value to install manpages in addition to html help: INSTALL_MANPAGES ?= @@ -116,7 +116,7 @@ TCL_FRAMEWORK_DIR := ${TCL_BUILD_DIR}/.. MAKE_VARS := else TCL_DIR := ${TCL_FRAMEWORK_DIR}/Tcl.framework -TCL_EXE := ${TCLSH_DIR}/bin/tclsh${TCL_VERSION} +TCL_EXE := ${TCLSH_DIR}/tclsh${TCL_VERSION} MAKE_VARS := TCL_EXE export DYLD_FRAMEWORK_PATH := ${TCL_FRAMEWORK_DIR} endif -- cgit v0.12 From 65b38b266578bb228a5ee208e85882ab7c3ccaba Mon Sep 17 00:00:00 2001 From: "jan.nijtmans" Date: Thu, 11 Feb 2016 13:11:28 +0000 Subject: (cherry-pick): Fix crash in TkFinalize() if Tk_Init() is never called. Suggested by Brian Griffin. --- generic/tkEvent.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/generic/tkEvent.c b/generic/tkEvent.c index 03e7283..747555e 100644 --- a/generic/tkEvent.c +++ b/generic/tkEvent.c @@ -2047,6 +2047,12 @@ TkFinalize( { ExitHandler *exitPtr; +#if defined(_WIN32) && !defined(STATIC_BUILD) + if (!tclStubsPtr) { + return; + } +#endif + Tcl_DeleteExitHandler(TkFinalize, NULL); Tcl_MutexLock(&exitMutex); -- cgit v0.12 From 754a4bf8c1a1249177f99eb567c7744cd57415de Mon Sep 17 00:00:00 2001 From: fvogel Date: Thu, 11 Feb 2016 13:59:46 +0000 Subject: Repair visual test for bevels, inadvertently broken in [9046f1cb83] (cherrypicked [7ac2438944]) --- tests/bevel.tcl | 2 -- 1 file changed, 2 deletions(-) diff --git a/tests/bevel.tcl b/tests/bevel.tcl index 531def0..4af60f3 100644 --- a/tests/bevel.tcl +++ b/tests/bevel.tcl @@ -147,14 +147,12 @@ set ind [.t.t index end] xxxx} {} SSSSS sol100 {xxxx x} {} SSSSSSSSSSSSSSSSSS sol100 {x xxx} {} SSSSSSSSS sol100 xxxx {} -} .t.t insert end "\n\nA thinner border is continuous" .t.t insert end { xxxx} {} SSSSS sol12 {xxxx x} {} SSSSSSSSSSSSSSSSSS sol12 {x xxx} {} SSSSSSSSS sol12 xxxx {} -} .t.t tag add big $ind end -- cgit v0.12 From 55332a033ec9aaf19d4b328ba3c2ea03ada2b368 Mon Sep 17 00:00:00 2001 From: fvogel Date: Thu, 11 Feb 2016 20:11:59 +0000 Subject: Fixed error in comment (cherrypicked [a3d4e5de17] --- generic/tkTextDisp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/generic/tkTextDisp.c b/generic/tkTextDisp.c index 68c09fc..1f39112 100644 --- a/generic/tkTextDisp.c +++ b/generic/tkTextDisp.c @@ -1638,7 +1638,7 @@ LayoutDLine( * Make one more pass over the line to recompute various things like its * height, length, and total number of bytes. Also modify the x-locations * of chunks to reflect justification. If we're not wrapping, I'm not sure - * what is the best way to handle left and center justification: should + * what is the best way to handle right and center justification: should * the total length, for purposes of justification, be (a) the window * width, (b) the length of the longest line in the window, or (c) the * length of the longest line in the text? (c) isn't available, (b) seems -- cgit v0.12 From d3c0ef57ac4577623b69c1f9439b8ff505cf6469 Mon Sep 17 00:00:00 2001 From: fvogel Date: Mon, 22 Feb 2016 17:47:02 +0000 Subject: Fixed bug [2981253] - spinbox button frozen in case of repeated depressions --- library/spinbox.tcl | 46 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 14 deletions(-) diff --git a/library/spinbox.tcl b/library/spinbox.tcl index 02584f4..8c287bf 100644 --- a/library/spinbox.tcl +++ b/library/spinbox.tcl @@ -86,10 +86,12 @@ bind Spinbox { ::tk::spinbox::Motion %W %x %y } bind Spinbox { + ::tk::spinbox::ArrowPress %W %x %y set tk::Priv(selectMode) word ::tk::spinbox::MouseSelect %W %x sel.first } bind Spinbox { + ::tk::spinbox::ArrowPress %W %x %y set tk::Priv(selectMode) line ::tk::spinbox::MouseSelect %W %x 0 } @@ -328,6 +330,35 @@ proc ::tk::spinbox::ClosestGap {w x} { incr pos } +# ::tk::spinbox::ArrowPress -- +# This procedure is invoked to handle button-1 presses in buttonup +# or buttondown elements of spinbox widgets. +# +# Arguments: +# w - The spinbox window in which the button was pressed. +# x - The x-coordinate of the button press. +# y - The y-coordinate of the button press. + +proc ::tk::spinbox::ArrowPress {w x y} { + variable ::tk::Priv + + if {[$w cget -state] ne "disabled" && \ + [string match "button*" $Priv(element)]} { + $w selection element $Priv(element) + set Priv(repeated) 0 + set Priv(relief) [$w cget -$Priv(element)relief] + catch {after cancel $Priv(afterId)} + set delay [$w cget -repeatdelay] + if {$delay > 0} { + set Priv(afterId) [after $delay \ + [list ::tk::spinbox::Invoke $w $Priv(element)]] + } + if {[info exists Priv(outsideElement)]} { + unset Priv(outsideElement) + } + } +} + # ::tk::spinbox::ButtonDown -- # This procedure is invoked to handle button-1 presses in spinbox # widgets. It moves the insertion cursor, sets the selection anchor, @@ -351,20 +382,7 @@ proc ::tk::spinbox::ButtonDown {w x y} { switch -exact $Priv(element) { "buttonup" - "buttondown" { - if {"disabled" ne [$w cget -state]} { - $w selection element $Priv(element) - set Priv(repeated) 0 - set Priv(relief) [$w cget -$Priv(element)relief] - catch {after cancel $Priv(afterId)} - set delay [$w cget -repeatdelay] - if {$delay > 0} { - set Priv(afterId) [after $delay \ - [list ::tk::spinbox::Invoke $w $Priv(element)]] - } - if {[info exists Priv(outsideElement)]} { - unset Priv(outsideElement) - } - } + ::tk::spinbox::ArrowPress $w $x $y } "entry" { set Priv(selectMode) char -- cgit v0.12 From c1281276fbe90d460fcf036c178a97477fa9755d Mon Sep 17 00:00:00 2001 From: fvogel Date: Mon, 22 Feb 2016 21:46:32 +0000 Subject: Fixed bug [3137232] - spinbox error after destroying toplevel from widget --- library/spinbox.tcl | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/library/spinbox.tcl b/library/spinbox.tcl index 02584f4..fecf7d6 100644 --- a/library/spinbox.tcl +++ b/library/spinbox.tcl @@ -299,6 +299,10 @@ bind Spinbox { proc ::tk::spinbox::Invoke {w elem} { variable ::tk::Priv + if {![winfo exists $w]} { + return + } + if {![info exists Priv(outsideElement)]} { $w invoke $elem incr Priv(repeated) -- cgit v0.12 From 744598fba3b7953fb234493c32017ffde290adc4 Mon Sep 17 00:00:00 2001 From: fvogel Date: Wed, 24 Feb 2016 17:19:36 +0000 Subject: Added tests cases for bug [2262543] - Scale widget unexpectedly fires command callback --- tests/scale.test | 108 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) diff --git a/tests/scale.test b/tests/scale.test index a8d08a8..8c14ed4 100644 --- a/tests/scale.test +++ b/tests/scale.test @@ -1396,6 +1396,114 @@ test scale-19 {Bug [3529885fff] - Click in through goes in wrong direction} \ } \ -result {1.0 1.0 1.0 1.0} +test scale-20.1 {Bug [2262543fff] - Scale widget unexpectedly fires command callback, case 1} -setup { + catch {destroy .s} + set res {} + set commandedVar -1 +} -body { + scale .s -from 1 -to 50 -command {set commandedVar} + pack .s + update ; # -command callback shall NOT fire + set res [list [.s get] $commandedVar] +} -cleanup { + destroy .s +} -result {1 -1} +test scale-20.2 {Bug [2262543fff] - Scale widget unexpectedly fires command callback, case 2} -setup { + catch {destroy .s} + set res {} + set commandedVar -1 + set scaleVar 7 +} -body { + scale .s -from 1 -to 50 -variable scaleVar -command {set commandedVar} + pack .s + update ; # -command callback shall NOT fire + set res [list [.s get] $commandedVar] +} -cleanup { + destroy .s +} -result {7 -1} +test scale-20.3 {Bug [2262543fff] - Scale widget unexpectedly fires command callback, case 3} -setup { + catch {destroy .s} + set res {} + set commandedVar -1 +} -body { + scale .s -from 1 -to 50 + .s set 10 + .s configure -command {set commandedVar} + pack .s + update ; # -command callback shall NOT fire + set res [list [.s get] $commandedVar] +} -cleanup { + destroy .s +} -result {10 -1} +test scale-20.4 {Bug [2262543fff] - Scale widget unexpectedly fires command callback, case 4} -setup { + catch {destroy .s} + set res {} + set commandedVar -1 +} -body { + scale .s -from 1 -to 50 -command {set commandedVar} + .s set 10 + pack .s + update ; # -command callback shall fire + set res [list [.s get] $commandedVar] +} -cleanup { + destroy .s +} -result {10 10} +test scale-20.5 {Bug [2262543fff] - Scale widget unexpectedly fires command callback, case 5} -setup { + catch {destroy .s} + set res {} + set commandedVar -1 +} -body { + scale .s -from 1 -to 50 + pack .s + .s set 10 + .s configure -command {set commandedVar} + update ; # -command callback shall NOT fire + set res [list [.s get] $commandedVar] +} -cleanup { + destroy .s +} -result {10 -1} +test scale-20.6 {Bug [2262543fff] - Scale widget unexpectedly fires command callback, case 6} -setup { + catch {destroy .s} + set res {} + set commandedVar -1 +} -body { + scale .s -from 1 -to 50 + pack .s + .s configure -command {set commandedVar} + .s set 10 + update ; # -command callback shall fire + set res [list [.s get] $commandedVar] +} -cleanup { + destroy .s +} -result {10 10} +test scale-20.7 {Bug [2262543fff] - Scale widget unexpectedly fires command callback, case 7} -setup { + catch {destroy .s} + set res {} + set commandedVar -1 +} -body { + scale .s -from 1 -to 50 -command {set commandedVar} + pack .s + .s set 10 + update ; # -command callback shall fire + set res [list [.s get] $commandedVar] +} -cleanup { + destroy .s +} -result {10 10} +test scale-20.8 {Bug [2262543fff] - Scale widget unexpectedly fires command callback, case 8} -setup { + catch {destroy .s} + set res {} + set commandedVar -1 + set scaleVar 7 +} -body { + scale .s -from 1 -to 50 -variable scaleVar -command {set commandedVar} + pack .s + .s set 10 + update ; # -command callback shall fire + set res [list [.s get] $commandedVar] +} -cleanup { + destroy .s +} -result {10 10} + option clear # cleanup -- cgit v0.12 From 1430fe4d490088fc08be89dc636425fcbc0bfd55 Mon Sep 17 00:00:00 2001 From: fvogel Date: Wed, 24 Feb 2016 17:32:24 +0000 Subject: Fixed bug [2262543] - Scale widget unexpectedly fires command callback --- generic/tkScale.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/generic/tkScale.c b/generic/tkScale.c index cc7c294..cbc5202 100644 --- a/generic/tkScale.c +++ b/generic/tkScale.c @@ -303,6 +303,12 @@ Tk_ScaleObjCmd( return TCL_ERROR; } + /* + * The widget was just created, no command callback must be invoked. + */ + + scalePtr->flags &= ~INVOKE_COMMAND; + Tcl_SetObjResult(interp, TkNewWindowObj(scalePtr->tkwin)); return TCL_OK; } @@ -1268,7 +1274,14 @@ TkScaleSetValue( return; } scalePtr->value = value; - if (invokeCommand) { + + /* + * Schedule command callback invocation only if there is such a command + * already registered, otherwise the callback would trigger later when + * configuring the widget -command option even if the value did not change. + */ + + if ((invokeCommand) && (scalePtr->command != NULL)) { scalePtr->flags |= INVOKE_COMMAND; } TkEventuallyRedrawScale(scalePtr, REDRAW_SLIDER); -- cgit v0.12 From ea0fe3caf62ae850acf6465668874ee9227b870d Mon Sep 17 00:00:00 2001 From: fvogel Date: Wed, 24 Feb 2016 20:29:31 +0000 Subject: Added test case wm-forget-2 related to test the fix for bug [e9112ef96e] --- tests/wm.test | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/tests/wm.test b/tests/wm.test index 1aa0779..afcc2cd 100644 --- a/tests/wm.test +++ b/tests/wm.test @@ -2276,6 +2276,32 @@ test wm-forget-1.4 "pack into unmapped toplevel causes crash" -body { deleteWindows } -result {} +test wm-forget-2 {bug [e9112ef96e] - [wm forget] doesn't completely} -setup { + catch {destroy .l .f.b .f} + set res {} +} -body { + label .l -text "Top Dot" + frame .f + button .f.b -text Hello -command "puts Hello!" + pack .l -side top + pack .f.b + pack .f -side bottom + update + set res [winfo manager .f] + pack forget .f + update + lappend res [winfo manager .f] + wm manage .f + update + lappend res [winfo manager .f] + wm forget .f + update + lappend res [winfo manager .f] +} -cleanup { + destroy .l .f.b .f + unset res +} -result {pack {} wm {}} + # FIXME: # Test delivery of virtual events to the WM. We could check to see if the -- cgit v0.12 From 22a09fa099a33900fca7c81d9ac4880b3d861b80 Mon Sep 17 00:00:00 2001 From: fvogel Date: Thu, 25 Feb 2016 14:40:12 +0000 Subject: Fixed bug [841280] - spinbox -from and -to defaults and behaviour --- doc/spinbox.n | 6 ++++-- generic/tkEntry.c | 16 +++++++++------- tests/spinbox.test | 15 +++++++++++++++ 3 files changed, 28 insertions(+), 9 deletions(-) diff --git a/doc/spinbox.n b/doc/spinbox.n index 330bb17..e030aa3 100644 --- a/doc/spinbox.n +++ b/doc/spinbox.n @@ -54,7 +54,8 @@ as it will format a floating-point number. A floating-point value corresponding to the lowest value for a spinbox, to be used in conjunction with \fB\-to\fR and \fB\-increment\fR. When all are specified correctly, the spinbox will use these values to control its -contents. This value must be less than the \fB\-to\fR option. +contents. If this value is greater than the \fB\-to\fR option, then +\fB\-from\fR and \fB\-to\fR values are automatically swapped. If \fB\-values\fR is specified, it supersedes this option. .OP "\-invalidcommand or \-invcmd" invalidCommand InvalidCommand Specifies a script to eval when \fB\-validatecommand\fR returns 0. Setting @@ -83,7 +84,8 @@ be displayed in a different color, depending on the values of the A floating-point value corresponding to the highest value for the spinbox, to be used in conjunction with \fB\-from\fR and \fB\-increment\fR. When all are specified correctly, the spinbox will use these values to control -its contents. This value must be greater than the \fB\-from\fR option. +its contents. If this value is less than the \fB\-from\fR option, then +\fB\-from\fR and \fB\-to\fR values are automatically swapped. If \fB\-values\fR is specified, it supersedes this option. .OP \-validate validate Validate Specifies the mode in which validation should operate: \fBnone\fR, diff --git a/generic/tkEntry.c b/generic/tkEntry.c index ea8d7f1..5681e47 100644 --- a/generic/tkEntry.c +++ b/generic/tkEntry.c @@ -1176,13 +1176,15 @@ ConfigureEntry( if (entryPtr->type == TK_SPINBOX) { if (sbPtr->fromValue > sbPtr->toValue) { - Tcl_SetObjResult(interp, Tcl_NewStringObj( - "-to value must be greater than -from value", - -1)); - Tcl_SetErrorCode(interp, "TK", "SPINBOX", "RANGE_SANITY", - NULL); - continue; - } + /* + * Swap -from and -to values. + */ + + double tmpFromTo = sbPtr->fromValue; + + sbPtr->fromValue = sbPtr->toValue; + sbPtr->toValue = tmpFromTo; + } if (sbPtr->reqFormat && (oldFormat != sbPtr->reqFormat)) { /* diff --git a/tests/spinbox.test b/tests/spinbox.test index 594cc90..0264b77 100644 --- a/tests/spinbox.test +++ b/tests/spinbox.test @@ -2072,6 +2072,21 @@ test spinbox-5.11 {ConfigureSpinbox procedure} -setup { } -cleanup { destroy .e } -result {} +test spinbox-5.12 {ConfigureSpinbox procedure, -from and -to swapping} -setup { + spinbox .e +} -body { + # this statement used to trigger error "-to value must be greater than -from value" + # because default value for -to is zero (bug [841280ffff]) + set res [catch {.e configure -from 10}] + .e configure -from 1971 -to 2016 ; # standard case + lappend res [.e cget -from] [.e cget -to] + .e configure -from 2016 -to 1971 ; # auto-swapping happens + lappend res [.e cget -from] [.e cget -to] + .e configure -to 1971 -from 2016 ; # auto-swapping, order of options does not matter + lappend res [.e cget -from] [.e cget -to] +} -cleanup { + destroy .e +} -result {0 1971.0 2016.0 1971.0 2016.0 1971.0 2016.0} # No tests for DisplaySpinbox. -- cgit v0.12 From 570a35541383a4b00d666486a2b5782e1eee63a0 Mon Sep 17 00:00:00 2001 From: dgp Date: Wed, 2 Mar 2016 02:41:54 +0000 Subject: [450bb0ecad] Proposed fix for [tk busy] corruption in Aqua Tk. --- generic/tkBusy.c | 4 ++++ generic/tkWindow.c | 3 +++ 2 files changed, 7 insertions(+) diff --git a/generic/tkBusy.c b/generic/tkBusy.c index 65248a2..b36d453 100644 --- a/generic/tkBusy.c +++ b/generic/tkBusy.c @@ -433,6 +433,10 @@ MakeTransparentWindowExist( TkpMakeTransparentWindowExist(tkwin, parent); + if (winPtr->window == None) { + return; /* Platform didn't make Window. */ + } + dispPtr = winPtr->dispPtr; hPtr = Tcl_CreateHashEntry(&dispPtr->winTable, (char *) winPtr->window, ¬Used); diff --git a/generic/tkWindow.c b/generic/tkWindow.c index b5cbbab..1e88844 100644 --- a/generic/tkWindow.c +++ b/generic/tkWindow.c @@ -2391,6 +2391,9 @@ Tk_IdToWindow( break; } } + if (window == None) { + return NULL; + } hPtr = Tcl_FindHashEntry(&dispPtr->winTable, (char *) window); if (hPtr == NULL) { -- cgit v0.12 From 7c636a1bd0b1f330f80c50d80997123bf2f13a1d Mon Sep 17 00:00:00 2001 From: dgp Date: Thu, 3 Mar 2016 19:19:29 +0000 Subject: Bump trunk to 8.7a0 to accept new feature development. --- README | 6 +- generic/tk.h | 12 +- library/tk.tcl | 2 +- macosx/Tk-Common.xcconfig | 2 +- unix/configure | 11262 +++++++++++++++++--------------------------- unix/configure.in | 10 +- unix/tk.spec | 6 +- win/README | 2 +- win/configure | 6464 +++++++++++++------------ win/configure.in | 18 +- win/tcl.m4 | 8 +- 11 files changed, 7824 insertions(+), 9968 deletions(-) diff --git a/README b/README index aa5d0f6..cb3bdd5 100644 --- a/README +++ b/README @@ -1,5 +1,5 @@ README: Tk - This is the Tk 8.6.5 source distribution. + This is the Tk 8.7a0 source distribution. http://sourceforge.net/projects/tcl/files/Tcl/ You can get any source release of Tk from the URL above. @@ -10,9 +10,9 @@ This directory contains the sources and documentation for Tk, an X11 toolkit implemented with the Tcl scripting language. For details on features, incompatibilities, and potential problems with -this release, see the Tcl/Tk 8.6 Web page at +this release, see the Tcl/Tk 8.7 Web page at - http://www.tcl.tk/software/tcltk/8.6.html + http://www.tcl.tk/software/tcltk/8.7.html or refer to the "changes" file in this directory, which contains a historical record of all changes to Tk. diff --git a/generic/tk.h b/generic/tk.h index 75d82ba..6abb05e 100644 --- a/generic/tk.h +++ b/generic/tk.h @@ -18,7 +18,7 @@ #include #if (TCL_MAJOR_VERSION != 8) || (TCL_MINOR_VERSION < 6) -# error Tk 8.6 must be compiled with tcl.h from Tcl 8.6 or better +# error Tk 8.7 must be compiled with tcl.h from Tcl 8.6 or better #endif #ifndef CONST84 @@ -73,12 +73,12 @@ extern "C" { */ #define TK_MAJOR_VERSION 8 -#define TK_MINOR_VERSION 6 -#define TK_RELEASE_LEVEL TCL_FINAL_RELEASE -#define TK_RELEASE_SERIAL 5 +#define TK_MINOR_VERSION 7 +#define TK_RELEASE_LEVEL TCL_ALPHA_RELEASE +#define TK_RELEASE_SERIAL 0 -#define TK_VERSION "8.6" -#define TK_PATCH_LEVEL "8.6.5" +#define TK_VERSION "8.7" +#define TK_PATCH_LEVEL "8.7a0" /* * A special definition used to allow this header file to be included from diff --git a/library/tk.tcl b/library/tk.tcl index 38162d1..7419325 100644 --- a/library/tk.tcl +++ b/library/tk.tcl @@ -13,7 +13,7 @@ # Insist on running with compatible version of Tcl package require Tcl 8.6 # Verify that we have Tk binary and script components from the same release -package require -exact Tk 8.6.5 +package require -exact Tk 8.7a0 # Create a ::tk namespace namespace eval ::tk { diff --git a/macosx/Tk-Common.xcconfig b/macosx/Tk-Common.xcconfig index 0d6e474..d75674a 100644 --- a/macosx/Tk-Common.xcconfig +++ b/macosx/Tk-Common.xcconfig @@ -43,4 +43,4 @@ TCL_PACKAGE_PATH = "$(LIBDIR)" TCL_DEFS = HAVE_TCL_CONFIG_H TK_LIBRARY = $(LIBDIR)/tk$(VERSION) TK_DEFS = HAVE_TK_CONFIG_H TCL_NO_DEPRECATED -VERSION = 8.6 +VERSION = 8.7 diff --git a/unix/configure b/unix/configure index 5ffc3fa..040f4a1 100755 --- a/unix/configure +++ b/unix/configure @@ -1,81 +1,459 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59 for tk 8.6. +# Generated by GNU Autoconf 2.69 for tk 8.7. +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# # -# Copyright (C) 2003 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi -DUALCASE=1; export DUALCASE # for MKS sh -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' fi +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." else - $as_unset $as_var + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." fi -done + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -# Name of the executable. -as_me=`$as_basename "$0" || +as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` - -# PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' @@ -83,146 +461,91 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop - s,-$,, - s,^['$as_cr_digits']*\n,, + s/-\n.*// ' >$as_me.lineno && - chmod +x $as_me.lineno || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" # Exit status is that of the last command. exit } - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file else - as_expr=false + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi -as_executable_p="test -f" +as_test_x='test -x' +as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -231,89 +554,247 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - +test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -exec 6>&1 - # # Initializations. # ac_default_prefix=/usr/local +ac_clean_files= ac_config_libobj_dir=. +LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} # Identity of this package. PACKAGE_NAME='tk' PACKAGE_TARNAME='tk' -PACKAGE_VERSION='8.6' -PACKAGE_STRING='tk 8.6' +PACKAGE_VERSION='8.7' +PACKAGE_STRING='tk 8.7' PACKAGE_BUGREPORT='' +PACKAGE_URL='' # Factoring default headers for most tests. ac_includes_default="\ #include -#if HAVE_SYS_TYPES_H +#ifdef HAVE_SYS_TYPES_H # include #endif -#if HAVE_SYS_STAT_H +#ifdef HAVE_SYS_STAT_H # include #endif -#if STDC_HEADERS +#ifdef STDC_HEADERS # include # include #else -# if HAVE_STDLIB_H +# ifdef HAVE_STDLIB_H # include # endif #endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif -#if HAVE_STRINGS_H +#ifdef HAVE_STRINGS_H # include #endif -#if HAVE_INTTYPES_H +#ifdef HAVE_INTTYPES_H # include -#else -# if HAVE_STDINT_H -# include -# endif #endif -#if HAVE_UNISTD_H +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS TCL_VERSION TCL_PATCH_LEVEL TCL_BIN_DIR TCL_SRC_DIR TCL_LIB_FILE TCL_LIB_FLAG TCL_LIB_SPEC TCL_STUB_LIB_FILE TCL_STUB_LIB_FLAG TCL_STUB_LIB_SPEC TCLSH_PROG BUILD_TCLSH MAN_FLAGS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP EGREP TCL_THREADS RANLIB ac_ct_RANLIB AR ac_ct_AR LIBOBJS TCL_LIBS DL_LIBS DL_OBJS PLAT_OBJS PLAT_SRCS LDAIX_SRC CFLAGS_DEBUG CFLAGS_OPTIMIZE CFLAGS_WARNING LDFLAGS_DEBUG LDFLAGS_OPTIMIZE CC_SEARCH_FLAGS LD_SEARCH_FLAGS STLIB_LD SHLIB_LD TCL_SHLIB_LD_EXTRAS TK_SHLIB_LD_EXTRAS SHLIB_LD_LIBS SHLIB_CFLAGS SHLIB_SUFFIX MAKE_LIB MAKE_STUB_LIB INSTALL_LIB DLL_INSTALL_DIR INSTALL_STUB_LIB CFLAGS_DEFAULT LDFLAGS_DEFAULT XFT_CFLAGS XFT_LIBS UNIX_FONT_OBJS TK_VERSION TK_MAJOR_VERSION TK_MINOR_VERSION TK_PATCH_LEVEL TK_YEAR TK_LIB_FILE TK_LIB_FLAG TK_LIB_SPEC TK_STUB_LIB_FILE TK_STUB_LIB_FLAG TK_STUB_LIB_SPEC TK_STUB_LIB_PATH TK_INCLUDE_SPEC TK_BUILD_STUB_LIB_SPEC TK_BUILD_STUB_LIB_PATH TK_SRC_DIR TK_SHARED_BUILD LD_LIBRARY_PATH_VAR TK_BUILD_LIB_SPEC TCL_STUB_FLAGS XINCLUDES XLIBSW LOCALES TK_WINDOWINGSYSTEM TK_PKG_DIR TK_LIBRARY LIB_RUNTIME_DIR PRIVATE_INCLUDE_DIR HTML_DIR EXTRA_CC_SWITCHES EXTRA_APP_CC_SWITCHES EXTRA_INSTALL EXTRA_INSTALL_BINARIES EXTRA_BUILD_HTML EXTRA_WISH_LIBS CFBUNDLELOCALIZATIONS TK_RSRC_FILE WISH_RSRC_FILE LIB_RSRC_FILE APP_RSRC_FILE REZ REZ_FLAGS LTLIBOBJS' +ac_subst_vars='LTLIBOBJS +REZ_FLAGS +REZ +APP_RSRC_FILE +LIB_RSRC_FILE +WISH_RSRC_FILE +TK_RSRC_FILE +CFBUNDLELOCALIZATIONS +EXTRA_WISH_LIBS +EXTRA_BUILD_HTML +EXTRA_INSTALL_BINARIES +EXTRA_INSTALL +EXTRA_APP_CC_SWITCHES +EXTRA_CC_SWITCHES +HTML_DIR +PRIVATE_INCLUDE_DIR +LIB_RUNTIME_DIR +TK_LIBRARY +TK_PKG_DIR +TK_WINDOWINGSYSTEM +LOCALES +XLIBSW +XINCLUDES +TCL_STUB_FLAGS +TK_BUILD_LIB_SPEC +LD_LIBRARY_PATH_VAR +TK_SHARED_BUILD +TK_SRC_DIR +TK_BUILD_STUB_LIB_PATH +TK_BUILD_STUB_LIB_SPEC +TK_INCLUDE_SPEC +TK_STUB_LIB_PATH +TK_STUB_LIB_SPEC +TK_STUB_LIB_FLAG +TK_STUB_LIB_FILE +TK_LIB_SPEC +TK_LIB_FLAG +TK_LIB_FILE +TK_YEAR +TK_PATCH_LEVEL +TK_MINOR_VERSION +TK_MAJOR_VERSION +TK_VERSION +UNIX_FONT_OBJS +XFT_LIBS +XFT_CFLAGS +XMKMF +LDFLAGS_DEFAULT +CFLAGS_DEFAULT +INSTALL_STUB_LIB +DLL_INSTALL_DIR +INSTALL_LIB +MAKE_STUB_LIB +MAKE_LIB +SHLIB_SUFFIX +SHLIB_CFLAGS +SHLIB_LD_LIBS +TK_SHLIB_LD_EXTRAS +TCL_SHLIB_LD_EXTRAS +SHLIB_LD +STLIB_LD +LD_SEARCH_FLAGS +CC_SEARCH_FLAGS +LDFLAGS_OPTIMIZE +LDFLAGS_DEBUG +CFLAGS_WARNING +CFLAGS_OPTIMIZE +CFLAGS_DEBUG +LDAIX_SRC +PLAT_SRCS +PLAT_OBJS +DL_OBJS +DL_LIBS +TCL_LIBS +LIBOBJS +AR +RANLIB +TCL_THREADS +EGREP +GREP +CPP +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +MAN_FLAGS +BUILD_TCLSH +TCLSH_PROG +TCL_STUB_LIB_SPEC +TCL_STUB_LIB_FLAG +TCL_STUB_LIB_FILE +TCL_LIB_SPEC +TCL_LIB_FLAG +TCL_LIB_FILE +TCL_SRC_DIR +TCL_BIN_DIR +TCL_PATCH_LEVEL +TCL_VERSION +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' ac_subst_files='' +ac_user_opts=' +enable_option_checking +with_tcl +enable_man_symlinks +enable_man_compression +enable_man_suffix +enable_threads +enable_shared +enable_64bit +enable_64bit_vis +enable_rpath +enable_corefoundation +enable_load +enable_symbols +enable_aqua +with_x +enable_xft +enable_xss +enable_framework +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP +XMKMF' + # Initialize some variables set by options. ac_init_help= ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null @@ -336,34 +817,49 @@ x_libraries=NONE # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' +datarootdir='${prefix}/share' +datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' ac_prev= +ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" + eval $ac_prev=\$ac_option ac_prev= continue fi - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac # Accept the important Cygnus configure options, so we can diagnose typos. - case $ac_option in + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; @@ -385,33 +881,59 @@ do --config-cache | -C) cache_file=config.cache ;; - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) + -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; esac - eval "enable_$ac_feature='$ac_optarg'" ;; + eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -438,6 +960,12 @@ do -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; @@ -462,13 +990,16 @@ do | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) + | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) @@ -533,6 +1064,16 @@ do | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; @@ -583,26 +1124,36 @@ do ac_init_version=: ;; -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; esac - eval "with_$ac_package='$ac_optarg'" ;; + eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. @@ -622,27 +1173,26 @@ do | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac @@ -650,31 +1200,36 @@ done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "missing argument to $ac_option" fi -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac -done +fi -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir do - eval ac_val=$`echo $ac_var` + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' @@ -688,8 +1243,6 @@ target=$target_alias if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -701,74 +1254,72 @@ test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then + if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done # # Report the --help message. @@ -777,7 +1328,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures tk 8.6 to adapt to many kinds of systems. +\`configure' configures tk 8.7 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -791,20 +1342,17 @@ Configuration: --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages + -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] -_ACEOF - - cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] + [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] + [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify @@ -814,18 +1362,25 @@ for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/tk] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF @@ -838,11 +1393,12 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of tk 8.6:";; + short | recursive ) echo "Configuration of tk 8.7:";; esac cat <<\_ACEOF Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-man-symlinks use symlinks for the manpages (default: off) @@ -879,169 +1435,546 @@ Some influential environment variables: CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory CPP C preprocessor + XMKMF Path to xmkmf, Makefile generator for X Window System Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. +Report bugs to the package provider. _ACEOF +ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. - ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue ac_builddir=. -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } done fi -test -n "$ac_init_help" && exit 0 +test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -tk configure 8.6 -generated by GNU Autoconf 2.59 +tk configure 8.7 +generated by GNU Autoconf 2.69 -Copyright (C) 2003 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF - exit 0 + exit fi -exec 5>config.log -cat >&5 <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -It was created by tk $as_me 8.6, which was -generated by GNU Autoconf 2.59. Invocation command line was - - $ $0 $@ +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## -_ACEOF +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () { -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval -} >&5 +} # ac_fn_c_try_compile -cat >&5 <<_ACEOF +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval -## ----------- ## -## Core tests. ## -## ----------- ## +} # ac_fn_c_try_cpp + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_check_type LINENO TYPE VAR INCLUDES +# ------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_c_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_type +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by tk $as_me 8.7, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## _ACEOF @@ -1054,7 +1987,6 @@ _ACEOF ac_configure_args= ac_configure_args0= ac_configure_args1= -ac_sep= ac_must_keep_next=false for ac_pass in 1 2 do @@ -1065,13 +1997,13 @@ do -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" + as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else @@ -1087,104 +2019,115 @@ do -* ) ac_must_keep_next=true ;; esac fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " + as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo - cat <<\_ASBOX -## ---------------- ## + $as_echo "## ---------------- ## ## Cache variables. ## -## ---------------- ## -_ASBOX +## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, -{ +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} + esac | + sort +) echo - cat <<\_ASBOX -## ----------------- ## + $as_echo "## ----------------- ## ## Output variables. ## -## ----------------- ## -_ASBOX +## ----------------- ##" echo for ac_var in $ac_subst_vars do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## -_ASBOX + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" echo for ac_var in $ac_subst_files do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## + $as_echo "## ----------- ## ## confdefs.h. ## -## ----------- ## -_ASBOX +## ----------- ##" echo - sed "/^$/d" confdefs.h | sort + cat confdefs.h echo fi test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" } >&5 - rm -f core *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status - ' 0 +' 0 for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. @@ -1192,112 +2135,137 @@ cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + # Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; esac fi else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do +for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -1310,35 +2278,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - - - - - - - - - - - - - - -TK_VERSION=8.6 +TK_VERSION=8.7 TK_MAJOR_VERSION=8 -TK_MINOR_VERSION=6 -TK_PATCH_LEVEL=".5" +TK_MINOR_VERSION=7 +TK_PATCH_LEVEL="a0" VERSION=${TK_VERSION} LOCALES="cs da de el en en_gb eo es fr hu it nl pl pt ru sv" @@ -1357,15 +2300,15 @@ LOCALES="cs da de el en en_gb eo es fr hu it nl pl pt ru sv" # we reset no_tcl in case something fails here no_tcl=true -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" - with_tclconfig="${withval}" -fi; - echo "$as_me:$LINENO: checking for Tcl configuration" >&5 -echo $ECHO_N "checking for Tcl configuration... $ECHO_C" >&6 - if test "${ac_cv_c_tclconfig+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +# Check whether --with-tcl was given. +if test "${with_tcl+set}" = set; then : + withval=$with_tcl; with_tclconfig="${withval}" +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Tcl configuration" >&5 +$as_echo_n "checking for Tcl configuration... " >&6; } + if ${ac_cv_c_tclconfig+:} false; then : + $as_echo_n "(cached) " >&6 else @@ -1374,17 +2317,15 @@ else case "${with_tclconfig}" in */tclConfig.sh ) if test -f "${with_tclconfig}"; then - { echo "$as_me:$LINENO: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&5 -echo "$as_me: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&5 +$as_echo "$as_me: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&2;} with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" fi ;; esac if test -f "${with_tclconfig}/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" else - { { echo "$as_me:$LINENO: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&5 -echo "$as_me: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "${with_tclconfig} directory doesn't contain tclConfig.sh" "$LINENO" 5 fi fi @@ -1460,28 +2401,26 @@ fi if test x"${ac_cv_c_tclconfig}" = x ; then TCL_BIN_DIR="# no Tcl configs found" - { { echo "$as_me:$LINENO: error: Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh" >&5 -echo "$as_me: error: Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh" "$LINENO" 5 else no_tcl= TCL_BIN_DIR="${ac_cv_c_tclconfig}" - echo "$as_me:$LINENO: result: found ${TCL_BIN_DIR}/tclConfig.sh" >&5 -echo "${ECHO_T}found ${TCL_BIN_DIR}/tclConfig.sh" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: found ${TCL_BIN_DIR}/tclConfig.sh" >&5 +$as_echo "found ${TCL_BIN_DIR}/tclConfig.sh" >&6; } fi fi - echo "$as_me:$LINENO: checking for existence of ${TCL_BIN_DIR}/tclConfig.sh" >&5 -echo $ECHO_N "checking for existence of ${TCL_BIN_DIR}/tclConfig.sh... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for existence of ${TCL_BIN_DIR}/tclConfig.sh" >&5 +$as_echo_n "checking for existence of ${TCL_BIN_DIR}/tclConfig.sh... " >&6; } if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then - echo "$as_me:$LINENO: result: loading" >&5 -echo "${ECHO_T}loading" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: loading" >&5 +$as_echo "loading" >&6; } . "${TCL_BIN_DIR}/tclConfig.sh" else - echo "$as_me:$LINENO: result: could not find ${TCL_BIN_DIR}/tclConfig.sh" >&5 -echo "${ECHO_T}could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not find ${TCL_BIN_DIR}/tclConfig.sh" >&5 +$as_echo "could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6; } fi # eval is required to do the TCL_DBGX substitution @@ -1542,25 +2481,19 @@ echo "${ECHO_T}could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6 if test "${TCL_MAJOR_VERSION}" -ne 8 ; then - { { echo "$as_me:$LINENO: error: ${PACKAGE_NAME} ${PACKAGE_VERSION} requires Tcl 8.6+ -Found config for Tcl ${TCL_VERSION}" >&5 -echo "$as_me: error: ${PACKAGE_NAME} ${PACKAGE_VERSION} requires Tcl 8.6+ -Found config for Tcl ${TCL_VERSION}" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "${PACKAGE_NAME} ${PACKAGE_VERSION} requires Tcl 8.6+ +Found config for Tcl ${TCL_VERSION}" "$LINENO" 5 fi if test "${TCL_MINOR_VERSION}" -lt 6 ; then - { { echo "$as_me:$LINENO: error: ${PACKAGE_NAME} ${PACKAGE_VERSION} requires Tcl 8.6+ -Found config for Tcl ${TCL_VERSION}" >&5 -echo "$as_me: error: ${PACKAGE_NAME} ${PACKAGE_VERSION} requires Tcl 8.6+ -Found config for Tcl ${TCL_VERSION}" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "${PACKAGE_NAME} ${PACKAGE_VERSION} requires Tcl 8.6+ +Found config for Tcl ${TCL_VERSION}" "$LINENO" 5 fi - echo "$as_me:$LINENO: checking for tclsh" >&5 -echo $ECHO_N "checking for tclsh... $ECHO_C" >&6 - if test "${ac_cv_path_tclsh+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tclsh" >&5 +$as_echo_n "checking for tclsh... " >&6; } + if ${ac_cv_path_tclsh+:} false; then : + $as_echo_n "(cached) " >&6 else search_path=`echo ${PATH} | sed -e 's/:/ /g'` @@ -1581,22 +2514,22 @@ fi if test -f "$ac_cv_path_tclsh" ; then TCLSH_PROG="$ac_cv_path_tclsh" - echo "$as_me:$LINENO: result: $TCLSH_PROG" >&5 -echo "${ECHO_T}$TCLSH_PROG" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TCLSH_PROG" >&5 +$as_echo "$TCLSH_PROG" >&6; } else # It is not an error if an installed version of Tcl can't be located. TCLSH_PROG="" - echo "$as_me:$LINENO: result: No tclsh found on PATH" >&5 -echo "${ECHO_T}No tclsh found on PATH" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: No tclsh found on PATH" >&5 +$as_echo "No tclsh found on PATH" >&6; } fi - echo "$as_me:$LINENO: checking for tclsh in Tcl build directory" >&5 -echo $ECHO_N "checking for tclsh in Tcl build directory... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tclsh in Tcl build directory" >&5 +$as_echo_n "checking for tclsh in Tcl build directory... " >&6; } BUILD_TCLSH="${TCL_BIN_DIR}"/tclsh - echo "$as_me:$LINENO: result: $BUILD_TCLSH" >&5 -echo "${ECHO_T}$BUILD_TCLSH" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_TCLSH" >&5 +$as_echo "$BUILD_TCLSH" >&6; } @@ -1619,62 +2552,60 @@ TK_SRC_DIR="`cd "$srcdir"/..; pwd`" #------------------------------------------------------------------------ - echo "$as_me:$LINENO: checking whether to use symlinks for manpages" >&5 -echo $ECHO_N "checking whether to use symlinks for manpages... $ECHO_C" >&6 - # Check whether --enable-man-symlinks or --disable-man-symlinks was given. -if test "${enable_man_symlinks+set}" = set; then - enableval="$enable_man_symlinks" - test "$enableval" != "no" && MAN_FLAGS="$MAN_FLAGS --symlinks" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use symlinks for manpages" >&5 +$as_echo_n "checking whether to use symlinks for manpages... " >&6; } + # Check whether --enable-man-symlinks was given. +if test "${enable_man_symlinks+set}" = set; then : + enableval=$enable_man_symlinks; test "$enableval" != "no" && MAN_FLAGS="$MAN_FLAGS --symlinks" else enableval="no" -fi; - echo "$as_me:$LINENO: result: $enableval" >&5 -echo "${ECHO_T}$enableval" >&6 - - echo "$as_me:$LINENO: checking whether to compress the manpages" >&5 -echo $ECHO_N "checking whether to compress the manpages... $ECHO_C" >&6 - # Check whether --enable-man-compression or --disable-man-compression was given. -if test "${enable_man_compression+set}" = set; then - enableval="$enable_man_compression" - case $enableval in - yes) { { echo "$as_me:$LINENO: error: missing argument to --enable-man-compression" >&5 -echo "$as_me: error: missing argument to --enable-man-compression" >&2;} - { (exit 1); exit 1; }; };; +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enableval" >&5 +$as_echo "$enableval" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to compress the manpages" >&5 +$as_echo_n "checking whether to compress the manpages... " >&6; } + # Check whether --enable-man-compression was given. +if test "${enable_man_compression+set}" = set; then : + enableval=$enable_man_compression; case $enableval in + yes) as_fn_error $? "missing argument to --enable-man-compression" "$LINENO" 5;; no) ;; *) MAN_FLAGS="$MAN_FLAGS --compress $enableval";; esac else enableval="no" -fi; - echo "$as_me:$LINENO: result: $enableval" >&5 -echo "${ECHO_T}$enableval" >&6 +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enableval" >&5 +$as_echo "$enableval" >&6; } if test "$enableval" != "no"; then - echo "$as_me:$LINENO: checking for compressed file suffix" >&5 -echo $ECHO_N "checking for compressed file suffix... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for compressed file suffix" >&5 +$as_echo_n "checking for compressed file suffix... " >&6; } touch TeST $enableval TeST Z=`ls TeST* | sed 's/^....//'` rm -f TeST* MAN_FLAGS="$MAN_FLAGS --extension $Z" - echo "$as_me:$LINENO: result: $Z" >&5 -echo "${ECHO_T}$Z" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $Z" >&5 +$as_echo "$Z" >&6; } fi - echo "$as_me:$LINENO: checking whether to add a package name suffix for the manpages" >&5 -echo $ECHO_N "checking whether to add a package name suffix for the manpages... $ECHO_C" >&6 - # Check whether --enable-man-suffix or --disable-man-suffix was given. -if test "${enable_man_suffix+set}" = set; then - enableval="$enable_man_suffix" - case $enableval in + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to add a package name suffix for the manpages" >&5 +$as_echo_n "checking whether to add a package name suffix for the manpages... " >&6; } + # Check whether --enable-man-suffix was given. +if test "${enable_man_suffix+set}" = set; then : + enableval=$enable_man_suffix; case $enableval in yes) enableval="tk" MAN_FLAGS="$MAN_FLAGS --suffix $enableval";; no) ;; *) MAN_FLAGS="$MAN_FLAGS --suffix $enableval";; esac else enableval="no" -fi; - echo "$as_me:$LINENO: result: $enableval" >&5 -echo "${ECHO_T}$enableval" >&6 +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enableval" >&5 +$as_echo "$enableval" >&6; } @@ -1697,10 +2628,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -1710,35 +2641,37 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. @@ -1748,39 +2681,50 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -1790,99 +2734,60 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + + fi fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC +if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else + ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. @@ -1900,24 +2805,25 @@ fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -1927,39 +2833,41 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. @@ -1969,66 +2877,78 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + test -n "$ac_ct_CC" && break done - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi fi fi -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2040,112 +2960,108 @@ main () } _ACEOF ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. break;; * ) break;; esac done +test "$ac_cv_exeext" = no && ac_cv_exeext= + else - echo "$as_me: failed program was:" >&5 + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } fi - +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 - -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -rm -f a.out a.exe conftest$ac_cv_exeext b.out +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with @@ -2153,38 +3069,90 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext break;; * ) break;; esac done else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2196,45 +3164,46 @@ main () } _ACEOF rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else - echo "$as_me: failed program was:" >&5 + $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } fi - rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2248,55 +3217,34 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no + ac_compiler_gnu=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2307,39 +3255,49 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ -ac_cv_prog_cc_g=no + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then @@ -2355,23 +3313,18 @@ else CFLAGS= fi fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 else - ac_cv_prog_cc_stdc=no + ac_cv_prog_cc_c89=no ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include -#include -#include +struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); @@ -2394,12 +3347,17 @@ static char *f (char * (*g) (char **, int), char **p, ...) /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std1 is added to get + as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std1. */ + that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; @@ -2414,205 +3372,37 @@ return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; return 0; } _ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg fi -rm -f conftest.err conftest.$ac_objext +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break done -rm -f conftest.$ac_ext conftest.$ac_objext +rm -f conftest.$ac_ext CC=$ac_save_CC fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac +if test "x$ac_cv_prog_cc_c89" != xno; then : -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -2620,18 +3410,14 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking for inline" >&5 -echo $ECHO_N "checking for inline... $ECHO_C" >&6 -if test "${ac_cv_c_inline+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 +$as_echo_n "checking for inline... " >&6; } +if ${ac_cv_c_inline+:} false; then : + $as_echo_n "(cached) " >&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifndef __cplusplus typedef int foo_t; @@ -2640,41 +3426,16 @@ $ac_kw foo_t foo () {return 0; } #endif _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_c_inline=$ac_kw; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_inline=$ac_kw fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test "$ac_cv_c_inline" != no && break done fi -echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 -echo "${ECHO_T}$ac_cv_c_inline" >&6 - +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 +$as_echo "$ac_cv_c_inline" >&6; } case $ac_cv_c_inline in inline | yes) ;; @@ -2702,15 +3463,15 @@ ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" @@ -2724,11 +3485,7 @@ do # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include @@ -2737,78 +3494,34 @@ cat >>conftest.$ac_ext <<_ACEOF #endif Syntax error _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_cpp "$LINENO"; then : +else # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers + # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then +if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. ac_preproc_ok=: break fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : break fi @@ -2820,8 +3533,8 @@ fi else ac_cv_prog_CPP=$CPP fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do @@ -2831,11 +3544,7 @@ do # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include @@ -2844,85 +3553,40 @@ cat >>conftest.$ac_ext <<_ACEOF #endif Syntax error _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_cpp "$LINENO"; then : +else # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers + # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then +if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. ac_preproc_ok=: break fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c @@ -2932,31 +3596,142 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -2971,51 +3746,23 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_stdc=no + ac_cv_header_stdc=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : + $EGREP "memchr" >/dev/null 2>&1; then : + else ac_cv_header_stdc=no fi @@ -3025,18 +3772,14 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : + $EGREP "free" >/dev/null 2>&1; then : + else ac_cv_header_stdc=no fi @@ -3046,16 +3789,13 @@ fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : : else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include +#include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) @@ -3075,109 +3815,39 @@ main () for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); + return 2; + return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_run "$LINENO"; then : -( exit $ac_status ) -ac_cv_header_stdc=no +else + ac_cv_header_stdc=no fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi + fi fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF +$as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_Header=no" -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi @@ -3185,196 +3855,48 @@ fi done -if test "${ac_cv_header_stdlib_h+set}" = set; then - echo "$as_me:$LINENO: checking for stdlib.h" >&5 -echo $ECHO_N "checking for stdlib.h... $ECHO_C" >&6 -if test "${ac_cv_header_stdlib_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdlib_h" >&5 -echo "${ECHO_T}$ac_cv_header_stdlib_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking stdlib.h usability" >&5 -echo $ECHO_N "checking stdlib.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking stdlib.h presence" >&5 -echo $ECHO_N "checking stdlib.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: stdlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: stdlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: stdlib.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: stdlib.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: stdlib.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: stdlib.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: stdlib.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: stdlib.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: stdlib.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: stdlib.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: stdlib.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: stdlib.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: stdlib.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: stdlib.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: stdlib.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: stdlib.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ----------------------------- ## -## Report this to the tk lists. ## -## ----------------------------- ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for stdlib.h" >&5 -echo $ECHO_N "checking for stdlib.h... $ECHO_C" >&6 -if test "${ac_cv_header_stdlib_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_stdlib_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdlib_h" >&5 -echo "${ECHO_T}$ac_cv_header_stdlib_h" >&6 - -fi -if test $ac_cv_header_stdlib_h = yes; then +ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" +if test "x$ac_cv_header_stdlib_h" = xyes; then : tk_ok=1 else tk_ok=0 fi -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "strtol" >/dev/null 2>&1; then - : + $EGREP "strtol" >/dev/null 2>&1; then : + else tk_ok=0 fi rm -f conftest* -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "strtoul" >/dev/null 2>&1; then - : + $EGREP "strtoul" >/dev/null 2>&1; then : + else tk_ok=0 fi rm -f conftest* -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "strtod" >/dev/null 2>&1; then - : + $EGREP "strtod" >/dev/null 2>&1; then : + else tk_ok=0 fi @@ -3382,9 +3904,7 @@ rm -f conftest* if test $tk_ok = 0; then -cat >>confdefs.h <<\_ACEOF -#define NO_STDLIB_H 1 -_ACEOF +$as_echo "#define NO_STDLIB_H 1" >>confdefs.h fi @@ -3394,18 +3914,14 @@ fi #------------------------------------------------------------------------ if test -z "$no_pipe" && test -n "$GCC"; then - echo "$as_me:$LINENO: checking if the compiler understands -pipe" >&5 -echo $ECHO_N "checking if the compiler understands -pipe... $ECHO_C" >&6 -if test "${tcl_cv_cc_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the compiler understands -pipe" >&5 +$as_echo_n "checking if the compiler understands -pipe... " >&6; } +if ${tcl_cv_cc_pipe+:} false; then : + $as_echo_n "(cached) " >&6 else hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -3416,40 +3932,16 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_cc_pipe=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cc_pipe=no + tcl_cv_cc_pipe=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext CFLAGS=$hold_cflags fi -echo "$as_me:$LINENO: result: $tcl_cv_cc_pipe" >&5 -echo "${ECHO_T}$tcl_cv_cc_pipe" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cc_pipe" >&5 +$as_echo "$tcl_cv_cc_pipe" >&6; } if test $tcl_cv_cc_pipe = yes; then CFLAGS="$CFLAGS -pipe" fi @@ -3460,13 +3952,13 @@ fi #------------------------------------------------------------------------ - # Check whether --enable-threads or --disable-threads was given. -if test "${enable_threads+set}" = set; then - enableval="$enable_threads" - tcl_ok=$enableval + # Check whether --enable-threads was given. +if test "${enable_threads+set}" = set; then : + enableval=$enable_threads; tcl_ok=$enableval else tcl_ok=yes -fi; +fi + if test "${TCL_THREADS}" = 1; then tcl_threaded_core=1; @@ -3477,92 +3969,56 @@ fi; # USE_THREAD_ALLOC tells us to try the special thread-based # allocator that significantly reduces lock contention -cat >>confdefs.h <<\_ACEOF -#define USE_THREAD_ALLOC 1 -_ACEOF +$as_echo "#define USE_THREAD_ALLOC 1" >>confdefs.h -cat >>confdefs.h <<\_ACEOF -#define _REENTRANT 1 -_ACEOF +$as_echo "#define _REENTRANT 1" >>confdefs.h if test "`uname -s`" = "SunOS" ; then -cat >>confdefs.h <<\_ACEOF -#define _POSIX_PTHREAD_SEMANTICS 1 -_ACEOF +$as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h fi -cat >>confdefs.h <<\_ACEOF -#define _THREAD_SAFE 1 -_ACEOF +$as_echo "#define _THREAD_SAFE 1" >>confdefs.h - echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthread" >&5 -echo $ECHO_N "checking for pthread_mutex_init in -lpthread... $ECHO_C" >&6 -if test "${ac_cv_lib_pthread_pthread_mutex_init+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_mutex_init in -lpthread" >&5 +$as_echo_n "checking for pthread_mutex_init in -lpthread... " >&6; } +if ${ac_cv_lib_pthread_pthread_mutex_init+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lpthread $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char pthread_mutex_init (); int main () { -pthread_mutex_init (); +return pthread_mutex_init (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_pthread_pthread_mutex_init=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_pthread_pthread_mutex_init=no + ac_cv_lib_pthread_pthread_mutex_init=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_mutex_init" >&5 -echo "${ECHO_T}$ac_cv_lib_pthread_pthread_mutex_init" >&6 -if test $ac_cv_lib_pthread_pthread_mutex_init = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_mutex_init" >&5 +$as_echo "$ac_cv_lib_pthread_pthread_mutex_init" >&6; } +if test "x$ac_cv_lib_pthread_pthread_mutex_init" = xyes; then : tcl_ok=yes else tcl_ok=no @@ -3574,71 +4030,43 @@ fi # defined. We could alternatively do an AC_TRY_COMPILE with # pthread.h, but that will work with libpthread really doesn't # exist, like AIX 4.2. [Bug: 4359] - echo "$as_me:$LINENO: checking for __pthread_mutex_init in -lpthread" >&5 -echo $ECHO_N "checking for __pthread_mutex_init in -lpthread... $ECHO_C" >&6 -if test "${ac_cv_lib_pthread___pthread_mutex_init+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for __pthread_mutex_init in -lpthread" >&5 +$as_echo_n "checking for __pthread_mutex_init in -lpthread... " >&6; } +if ${ac_cv_lib_pthread___pthread_mutex_init+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lpthread $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char __pthread_mutex_init (); int main () { -__pthread_mutex_init (); +return __pthread_mutex_init (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_pthread___pthread_mutex_init=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_pthread___pthread_mutex_init=no + ac_cv_lib_pthread___pthread_mutex_init=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_pthread___pthread_mutex_init" >&5 -echo "${ECHO_T}$ac_cv_lib_pthread___pthread_mutex_init" >&6 -if test $ac_cv_lib_pthread___pthread_mutex_init = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread___pthread_mutex_init" >&5 +$as_echo "$ac_cv_lib_pthread___pthread_mutex_init" >&6; } +if test "x$ac_cv_lib_pthread___pthread_mutex_init" = xyes; then : tcl_ok=yes else tcl_ok=no @@ -3650,71 +4078,43 @@ fi # The space is needed THREADS_LIBS=" -lpthread" else - echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthreads" >&5 -echo $ECHO_N "checking for pthread_mutex_init in -lpthreads... $ECHO_C" >&6 -if test "${ac_cv_lib_pthreads_pthread_mutex_init+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_mutex_init in -lpthreads" >&5 +$as_echo_n "checking for pthread_mutex_init in -lpthreads... " >&6; } +if ${ac_cv_lib_pthreads_pthread_mutex_init+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lpthreads $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char pthread_mutex_init (); int main () { -pthread_mutex_init (); +return pthread_mutex_init (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_pthreads_pthread_mutex_init=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_pthreads_pthread_mutex_init=no + ac_cv_lib_pthreads_pthread_mutex_init=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_pthreads_pthread_mutex_init" >&5 -echo "${ECHO_T}$ac_cv_lib_pthreads_pthread_mutex_init" >&6 -if test $ac_cv_lib_pthreads_pthread_mutex_init = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthreads_pthread_mutex_init" >&5 +$as_echo "$ac_cv_lib_pthreads_pthread_mutex_init" >&6; } +if test "x$ac_cv_lib_pthreads_pthread_mutex_init" = xyes; then : tcl_ok=yes else tcl_ok=no @@ -3724,142 +4124,86 @@ fi # The space is needed THREADS_LIBS=" -lpthreads" else - echo "$as_me:$LINENO: checking for pthread_mutex_init in -lc" >&5 -echo $ECHO_N "checking for pthread_mutex_init in -lc... $ECHO_C" >&6 -if test "${ac_cv_lib_c_pthread_mutex_init+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_mutex_init in -lc" >&5 +$as_echo_n "checking for pthread_mutex_init in -lc... " >&6; } +if ${ac_cv_lib_c_pthread_mutex_init+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lc $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char pthread_mutex_init (); int main () { -pthread_mutex_init (); +return pthread_mutex_init (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_c_pthread_mutex_init=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_c_pthread_mutex_init=no + ac_cv_lib_c_pthread_mutex_init=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_c_pthread_mutex_init" >&5 -echo "${ECHO_T}$ac_cv_lib_c_pthread_mutex_init" >&6 -if test $ac_cv_lib_c_pthread_mutex_init = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_pthread_mutex_init" >&5 +$as_echo "$ac_cv_lib_c_pthread_mutex_init" >&6; } +if test "x$ac_cv_lib_c_pthread_mutex_init" = xyes; then : tcl_ok=yes else tcl_ok=no fi if test "$tcl_ok" = "no"; then - echo "$as_me:$LINENO: checking for pthread_mutex_init in -lc_r" >&5 -echo $ECHO_N "checking for pthread_mutex_init in -lc_r... $ECHO_C" >&6 -if test "${ac_cv_lib_c_r_pthread_mutex_init+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_mutex_init in -lc_r" >&5 +$as_echo_n "checking for pthread_mutex_init in -lc_r... " >&6; } +if ${ac_cv_lib_c_r_pthread_mutex_init+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lc_r $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char pthread_mutex_init (); int main () { -pthread_mutex_init (); +return pthread_mutex_init (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_c_r_pthread_mutex_init=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_c_r_pthread_mutex_init=no + ac_cv_lib_c_r_pthread_mutex_init=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_c_r_pthread_mutex_init" >&5 -echo "${ECHO_T}$ac_cv_lib_c_r_pthread_mutex_init" >&6 -if test $ac_cv_lib_c_r_pthread_mutex_init = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_r_pthread_mutex_init" >&5 +$as_echo "$ac_cv_lib_c_r_pthread_mutex_init" >&6; } +if test "x$ac_cv_lib_c_r_pthread_mutex_init" = xyes; then : tcl_ok=yes else tcl_ok=no @@ -3870,8 +4214,8 @@ fi THREADS_LIBS=" -pthread" else TCL_THREADS=0 - { echo "$as_me:$LINENO: WARNING: Don't know how to find pthread lib on your system - you must disable thread support or edit the LIBS in the Makefile..." >&5 -echo "$as_me: WARNING: Don't know how to find pthread lib on your system - you must disable thread support or edit the LIBS in the Makefile..." >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Don't know how to find pthread lib on your system - you must disable thread support or edit the LIBS in the Makefile..." >&5 +$as_echo "$as_me: WARNING: Don't know how to find pthread lib on your system - you must disable thread support or edit the LIBS in the Makefile..." >&2;} fi fi fi @@ -3882,104 +4226,13 @@ echo "$as_me: WARNING: Don't know how to find pthread lib on your system - you m ac_saved_libs=$LIBS LIBS="$LIBS $THREADS_LIBS" - - -for ac_func in pthread_attr_setstacksize pthread_atfork -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != $ac_func; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_var=no" -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then + for ac_func in pthread_attr_setstacksize pthread_atfork +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi @@ -3990,24 +4243,22 @@ done TCL_THREADS=0 fi # Do checking message here to not mess up interleaved configure output - echo "$as_me:$LINENO: checking for building with threads" >&5 -echo $ECHO_N "checking for building with threads... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for building with threads" >&5 +$as_echo_n "checking for building with threads... " >&6; } if test "${TCL_THREADS}" = 1; then -cat >>confdefs.h <<\_ACEOF -#define TCL_THREADS 1 -_ACEOF +$as_echo "#define TCL_THREADS 1" >>confdefs.h if test "${tcl_threaded_core}" = 1; then - echo "$as_me:$LINENO: result: yes (threaded core)" >&5 -echo "${ECHO_T}yes (threaded core)" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes (threaded core)" >&5 +$as_echo "yes (threaded core)" >&6; } else - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } fi else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -4017,15 +4268,15 @@ echo "${ECHO_T}no" >&6 LIBS="$LIBS$THREADS_LIBS" - echo "$as_me:$LINENO: checking how to build libraries" >&5 -echo $ECHO_N "checking how to build libraries... $ECHO_C" >&6 - # Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - tcl_ok=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to build libraries" >&5 +$as_echo_n "checking how to build libraries... " >&6; } + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; tcl_ok=$enableval else tcl_ok=yes -fi; +fi + if test "${enable_shared+set}" = set; then enableval="$enable_shared" @@ -4035,17 +4286,15 @@ fi; fi if test "$tcl_ok" = "yes" ; then - echo "$as_me:$LINENO: result: shared" >&5 -echo "${ECHO_T}shared" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: shared" >&5 +$as_echo "shared" >&6; } SHARED_BUILD=1 else - echo "$as_me:$LINENO: result: static" >&5 -echo "${ECHO_T}static" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: static" >&5 +$as_echo "static" >&6; } SHARED_BUILD=0 -cat >>confdefs.h <<\_ACEOF -#define STATIC_BUILD 1 -_ACEOF +$as_echo "#define STATIC_BUILD 1" >>confdefs.h fi @@ -4059,10 +4308,10 @@ _ACEOF if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. @@ -4072,35 +4321,37 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. @@ -4110,28 +4361,38 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - RANLIB=$ac_ct_RANLIB + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi else RANLIB="$ac_cv_prog_RANLIB" fi @@ -4140,52 +4401,47 @@ fi # Step 0.a: Enable 64 bit support? - echo "$as_me:$LINENO: checking if 64bit support is requested" >&5 -echo $ECHO_N "checking if 64bit support is requested... $ECHO_C" >&6 - # Check whether --enable-64bit or --disable-64bit was given. -if test "${enable_64bit+set}" = set; then - enableval="$enable_64bit" - do64bit=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if 64bit support is requested" >&5 +$as_echo_n "checking if 64bit support is requested... " >&6; } + # Check whether --enable-64bit was given. +if test "${enable_64bit+set}" = set; then : + enableval=$enable_64bit; do64bit=$enableval else do64bit=no -fi; - echo "$as_me:$LINENO: result: $do64bit" >&5 -echo "${ECHO_T}$do64bit" >&6 +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $do64bit" >&5 +$as_echo "$do64bit" >&6; } # Step 0.b: Enable Solaris 64 bit VIS support? - echo "$as_me:$LINENO: checking if 64bit Sparc VIS support is requested" >&5 -echo $ECHO_N "checking if 64bit Sparc VIS support is requested... $ECHO_C" >&6 - # Check whether --enable-64bit-vis or --disable-64bit-vis was given. -if test "${enable_64bit_vis+set}" = set; then - enableval="$enable_64bit_vis" - do64bitVIS=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if 64bit Sparc VIS support is requested" >&5 +$as_echo_n "checking if 64bit Sparc VIS support is requested... " >&6; } + # Check whether --enable-64bit-vis was given. +if test "${enable_64bit_vis+set}" = set; then : + enableval=$enable_64bit_vis; do64bitVIS=$enableval else do64bitVIS=no -fi; - echo "$as_me:$LINENO: result: $do64bitVIS" >&5 -echo "${ECHO_T}$do64bitVIS" >&6 +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $do64bitVIS" >&5 +$as_echo "$do64bitVIS" >&6; } # Force 64bit on with VIS - if test "$do64bitVIS" = "yes"; then + if test "$do64bitVIS" = "yes"; then : do64bit=yes fi - # Step 0.c: Check if visibility support is available. Do this here so # that platform specific alternatives can be used below if this fails. - echo "$as_me:$LINENO: checking if compiler supports visibility \"hidden\"" >&5 -echo $ECHO_N "checking if compiler supports visibility \"hidden\"... $ECHO_C" >&6 -if test "${tcl_cv_cc_visibility_hidden+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if compiler supports visibility \"hidden\"" >&5 +$as_echo_n "checking if compiler supports visibility \"hidden\"... " >&6; } +if ${tcl_cv_cc_visibility_hidden+:} false; then : + $as_echo_n "(cached) " >&6 else hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ extern __attribute__((__visibility__("hidden"))) void f(void); @@ -4198,79 +4454,50 @@ f(); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_cc_visibility_hidden=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cc_visibility_hidden=no + tcl_cv_cc_visibility_hidden=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext CFLAGS=$hold_cflags fi -echo "$as_me:$LINENO: result: $tcl_cv_cc_visibility_hidden" >&5 -echo "${ECHO_T}$tcl_cv_cc_visibility_hidden" >&6 - if test $tcl_cv_cc_visibility_hidden = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cc_visibility_hidden" >&5 +$as_echo "$tcl_cv_cc_visibility_hidden" >&6; } + if test $tcl_cv_cc_visibility_hidden = yes; then : -cat >>confdefs.h <<\_ACEOF -#define MODULE_SCOPE extern __attribute__((__visibility__("hidden"))) -_ACEOF +$as_echo "#define MODULE_SCOPE extern __attribute__((__visibility__(\"hidden\")))" >>confdefs.h -cat >>confdefs.h <<\_ACEOF -#define HAVE_HIDDEN 1 -_ACEOF +$as_echo "#define HAVE_HIDDEN 1" >>confdefs.h fi - # Step 0.d: Disable -rpath support? - echo "$as_me:$LINENO: checking if rpath support is requested" >&5 -echo $ECHO_N "checking if rpath support is requested... $ECHO_C" >&6 - # Check whether --enable-rpath or --disable-rpath was given. -if test "${enable_rpath+set}" = set; then - enableval="$enable_rpath" - doRpath=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if rpath support is requested" >&5 +$as_echo_n "checking if rpath support is requested... " >&6; } + # Check whether --enable-rpath was given. +if test "${enable_rpath+set}" = set; then : + enableval=$enable_rpath; doRpath=$enableval else doRpath=yes -fi; - echo "$as_me:$LINENO: result: $doRpath" >&5 -echo "${ECHO_T}$doRpath" >&6 +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $doRpath" >&5 +$as_echo "$doRpath" >&6; } # Step 1: set the variable "system" to hold the name and version number # for the system. - echo "$as_me:$LINENO: checking system version" >&5 -echo $ECHO_N "checking system version... $ECHO_C" >&6 -if test "${tcl_cv_sys_version+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking system version" >&5 +$as_echo_n "checking system version... " >&6; } +if ${tcl_cv_sys_version+:} false; then : + $as_echo_n "(cached) " >&6 else if test -f /usr/lib/NextStep/software_version; then @@ -4278,8 +4505,8 @@ else else tcl_cv_sys_version=`uname -s`-`uname -r` if test "$?" -ne 0 ; then - { echo "$as_me:$LINENO: WARNING: can't find uname command" >&5 -echo "$as_me: WARNING: can't find uname command" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: can't find uname command" >&5 +$as_echo "$as_me: WARNING: can't find uname command" >&2;} tcl_cv_sys_version=unknown else # Special check for weird MP-RAS system (uname returns weird @@ -4295,79 +4522,51 @@ echo "$as_me: WARNING: can't find uname command" >&2;} fi fi -echo "$as_me:$LINENO: result: $tcl_cv_sys_version" >&5 -echo "${ECHO_T}$tcl_cv_sys_version" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_sys_version" >&5 +$as_echo "$tcl_cv_sys_version" >&6; } system=$tcl_cv_sys_version # Step 2: check for existence of -ldl library. This is needed because # Linux can use either -ldl or -ldld for dynamic loading. - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char dlopen (); int main () { -dlopen (); +return dlopen (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no + ac_cv_lib_dl_dlopen=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : have_dl=yes else have_dl=no @@ -4393,7 +4592,7 @@ fi ECHO_VERSION='`echo ${VERSION}`' TCL_LIB_VERSIONS_OK=ok CFLAGS_DEBUG=-g - if test "$GCC" = yes; then + if test "$GCC" = yes; then : CFLAGS_OPTIMIZE=-O2 CFLAGS_WARNING="-Wall" @@ -4404,14 +4603,13 @@ else CFLAGS_WARNING="" fi - if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. @@ -4421,35 +4619,37 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AR="${ac_tool_prefix}ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then - echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi if test -z "$ac_cv_prog_AR"; then ac_ct_AR=$AR # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. @@ -4459,27 +4659,38 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_AR="ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then - echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -echo "${ECHO_T}$ac_ct_AR" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - AR=$ac_ct_AR + if test "x$ac_ct_AR" = x; then + AR="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi else AR="$ac_cv_prog_AR" fi @@ -4489,13 +4700,12 @@ fi PLAT_OBJS="" PLAT_SRCS="" LDAIX_SRC="" - if test x"${SHLIB_VERSION}" = x; then + if test x"${SHLIB_VERSION}" = x; then : SHLIB_VERSION="1.0" fi - case $system in AIX-*) - if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"; then + if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"; then : # AIX requires the _r compiler when gcc isn't being used case "${CC}" in @@ -4507,11 +4717,10 @@ fi CC=`echo "$CC" | sed -e 's/^\([^ ]*\)/\1_r/'` ;; esac - echo "$as_me:$LINENO: result: Using $CC for compiling with threads" >&5 -echo "${ECHO_T}Using $CC for compiling with threads" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using $CC for compiling with threads" >&5 +$as_echo "Using $CC for compiling with threads" >&6; } fi - LIBS="$LIBS -lc" SHLIB_CFLAGS="" SHLIB_SUFFIX=".so" @@ -4524,12 +4733,12 @@ fi LDAIX_SRC='$(UNIX_DIR)/ldAix' # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = yes; then + if test "$do64bit" = yes; then : - if test "$GCC" = yes; then + if test "$GCC" = yes; then : - { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC on $system" >&5 -echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit mode not supported with GCC on $system" >&5 +$as_echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;} else @@ -4542,17 +4751,15 @@ else fi - fi - - if test "`uname -m`" = ia64; then + if test "`uname -m`" = ia64; then : # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC SHLIB_LD="/usr/ccs/bin/ld -G -z text" # AIX-5 has dl* in libc.so DL_LIBS="" - if test "$GCC" = yes; then + if test "$GCC" = yes; then : CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' @@ -4561,12 +4768,11 @@ else CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' fi - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' else - if test "$GCC" = yes; then + if test "$GCC" = yes; then : SHLIB_LD='${CC} -shared -Wl,-bexpall' @@ -4576,14 +4782,12 @@ else LDFLAGS="$LDFLAGS -brtl" fi - SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" DL_LIBS="-ldl" CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} fi - ;; BeOS*) SHLIB_CFLAGS="-fPIC" @@ -4597,71 +4801,43 @@ fi # -lsocket, even if the network functions are in -lnet which # is always linked to, for compatibility. #----------------------------------------------------------- - echo "$as_me:$LINENO: checking for inet_ntoa in -lbind" >&5 -echo $ECHO_N "checking for inet_ntoa in -lbind... $ECHO_C" >&6 -if test "${ac_cv_lib_bind_inet_ntoa+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for inet_ntoa in -lbind" >&5 +$as_echo_n "checking for inet_ntoa in -lbind... " >&6; } +if ${ac_cv_lib_bind_inet_ntoa+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lbind $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char inet_ntoa (); int main () { -inet_ntoa (); +return inet_ntoa (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_bind_inet_ntoa=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_bind_inet_ntoa=no + ac_cv_lib_bind_inet_ntoa=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_bind_inet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_bind_inet_ntoa" >&6 -if test $ac_cv_lib_bind_inet_ntoa = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bind_inet_ntoa" >&5 +$as_echo "$ac_cv_lib_bind_inet_ntoa" >&6; } +if test "x$ac_cv_lib_bind_inet_ntoa" = xyes; then : LIBS="$LIBS -lbind -lsocket" fi @@ -4698,16 +4874,12 @@ fi TCL_NEEDS_EXP_FILE=1 TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.dll.a' SHLIB_LD_LIBS="${SHLIB_LD_LIBS} -Wl,--out-implib,\$@.a" - echo "$as_me:$LINENO: checking for Cygwin version of gcc" >&5 -echo $ECHO_N "checking for Cygwin version of gcc... $ECHO_C" >&6 -if test "${ac_cv_cygwin+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Cygwin version of gcc" >&5 +$as_echo_n "checking for Cygwin version of gcc... " >&6; } +if ${ac_cv_cygwin+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __CYGWIN__ @@ -4722,49 +4894,21 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_cygwin=no else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_cygwin=yes + ac_cv_cygwin=yes fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_cygwin" >&5 -echo "${ECHO_T}$ac_cv_cygwin" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cygwin" >&5 +$as_echo "$ac_cv_cygwin" >&6; } if test "$ac_cv_cygwin" = "no"; then - { { echo "$as_me:$LINENO: error: ${CC} is not a cygwin compiler." >&5 -echo "$as_me: error: ${CC} is not a cygwin compiler." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "${CC} is not a cygwin compiler." "$LINENO" 5 fi if test "x${TCL_THREADS}" = "x0"; then - { { echo "$as_me:$LINENO: error: CYGWIN compile is only supported with --enable-threads" >&5 -echo "$as_me: error: CYGWIN compile is only supported with --enable-threads" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "CYGWIN compile is only supported with --enable-threads" "$LINENO" 5 fi do64bit_ok=yes if test "x${SHARED_BUILD}" = "x1"; then @@ -4794,71 +4938,43 @@ echo "$as_me: error: CYGWIN compile is only supported with --enable-threads" >&2 SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}' DL_OBJS="tclLoadDl.o" DL_LIBS="-lroot" - echo "$as_me:$LINENO: checking for inet_ntoa in -lnetwork" >&5 -echo $ECHO_N "checking for inet_ntoa in -lnetwork... $ECHO_C" >&6 -if test "${ac_cv_lib_network_inet_ntoa+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for inet_ntoa in -lnetwork" >&5 +$as_echo_n "checking for inet_ntoa in -lnetwork... " >&6; } +if ${ac_cv_lib_network_inet_ntoa+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lnetwork $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char inet_ntoa (); int main () { -inet_ntoa (); +return inet_ntoa (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_network_inet_ntoa=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_network_inet_ntoa=no + ac_cv_lib_network_inet_ntoa=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_network_inet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_network_inet_ntoa" >&6 -if test $ac_cv_lib_network_inet_ntoa = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_network_inet_ntoa" >&5 +$as_echo "$ac_cv_lib_network_inet_ntoa" >&6; } +if test "x$ac_cv_lib_network_inet_ntoa" = xyes; then : LIBS="$LIBS -lnetwork" fi @@ -4866,18 +4982,14 @@ fi HP-UX-*.11.*) # Use updated header definitions where possible -cat >>confdefs.h <<\_ACEOF -#define _XOPEN_SOURCE_EXTENDED 1 -_ACEOF +$as_echo "#define _XOPEN_SOURCE_EXTENDED 1" >>confdefs.h -cat >>confdefs.h <<\_ACEOF -#define _XOPEN_SOURCE 1 -_ACEOF +$as_echo "#define _XOPEN_SOURCE 1" >>confdefs.h LIBS="$LIBS -lxnet" # Use the XOPEN network library - if test "`uname -m`" = ia64; then + if test "`uname -m`" = ia64; then : SHLIB_SUFFIX=".so" @@ -4886,78 +4998,49 @@ else SHLIB_SUFFIX=".sl" fi - - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char shl_load (); int main () { -shl_load (); +return shl_load (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_shl_load=no + ac_cv_lib_dld_shl_load=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : tcl_ok=yes else tcl_ok=no fi - if test "$tcl_ok" = yes; then + if test "$tcl_ok" = yes; then : SHLIB_CFLAGS="+z" SHLIB_LD="ld -b" @@ -4969,8 +5052,7 @@ fi LD_LIBRARY_PATH_VAR="SHLIB_PATH" fi - - if test "$GCC" = yes; then + if test "$GCC" = yes; then : SHLIB_LD='${CC} -shared' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} @@ -4981,30 +5063,28 @@ else fi - # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc #CFLAGS="$CFLAGS +DAportable" # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = "yes"; then + if test "$do64bit" = "yes"; then : - if test "$GCC" = yes; then + if test "$GCC" = yes; then : case `${CC} -dumpmachine` in hppa64*) # 64-bit gcc in use. Fix flags for GNU ld. do64bit_ok=yes SHLIB_LD='${CC} -shared' - if test $doRpath = yes; then + if test $doRpath = yes; then : CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' fi - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} ;; *) - { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC on $system" >&5 -echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit mode not supported with GCC on $system" >&5 +$as_echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;} ;; esac @@ -5016,82 +5096,52 @@ else fi - -fi - ;; +fi ;; HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) SHLIB_SUFFIX=".sl" - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char shl_load (); int main () { -shl_load (); +return shl_load (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_shl_load=no + ac_cv_lib_dld_shl_load=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : tcl_ok=yes else tcl_ok=no fi - if test "$tcl_ok" = yes; then + if test "$tcl_ok" = yes; then : SHLIB_CFLAGS="+z" SHLIB_LD="ld -b" @@ -5103,28 +5153,24 @@ fi LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' LD_LIBRARY_PATH_VAR="SHLIB_PATH" -fi - ;; +fi ;; IRIX-5.*) SHLIB_CFLAGS="" SHLIB_LD="ld -shared -rdata_shared" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" - case $LIBOBJS in - "mkstemp.$ac_objext" | \ - *" mkstemp.$ac_objext" | \ - "mkstemp.$ac_objext "* | \ + case " $LIBOBJS " in *" mkstemp.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS mkstemp.$ac_objext" ;; + *) LIBOBJS="$LIBOBJS mkstemp.$ac_objext" + ;; esac - if test $doRpath = yes; then + if test $doRpath = yes; then : CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' fi - ;; IRIX-6.*) SHLIB_CFLAGS="" @@ -5132,21 +5178,18 @@ fi SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" - case $LIBOBJS in - "mkstemp.$ac_objext" | \ - *" mkstemp.$ac_objext" | \ - "mkstemp.$ac_objext "* | \ + case " $LIBOBJS " in *" mkstemp.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS mkstemp.$ac_objext" ;; + *) LIBOBJS="$LIBOBJS mkstemp.$ac_objext" + ;; esac - if test $doRpath = yes; then + if test $doRpath = yes; then : CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' fi - - if test "$GCC" = yes; then + if test "$GCC" = yes; then : CFLAGS="$CFLAGS -mabi=n32" LDFLAGS="$LDFLAGS -mabi=n32" @@ -5165,7 +5208,6 @@ else LDFLAGS="$LDFLAGS -n32" fi - ;; IRIX64-6.*) SHLIB_CFLAGS="" @@ -5173,29 +5215,26 @@ fi SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" - case $LIBOBJS in - "mkstemp.$ac_objext" | \ - *" mkstemp.$ac_objext" | \ - "mkstemp.$ac_objext "* | \ + case " $LIBOBJS " in *" mkstemp.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS mkstemp.$ac_objext" ;; + *) LIBOBJS="$LIBOBJS mkstemp.$ac_objext" + ;; esac - if test $doRpath = yes; then + if test $doRpath = yes; then : CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' fi - # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = yes; then + if test "$do64bit" = yes; then : - if test "$GCC" = yes; then + if test "$GCC" = yes; then : - { echo "$as_me:$LINENO: WARNING: 64bit mode not supported by gcc" >&5 -echo "$as_me: WARNING: 64bit mode not supported by gcc" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit mode not supported by gcc" >&5 +$as_echo "$as_me: WARNING: 64bit mode not supported by gcc" >&2;} else @@ -5206,9 +5245,7 @@ else fi - fi - ;; Linux*|GNU*|NetBSD-Debian) SHLIB_CFLAGS="-fPIC" @@ -5224,31 +5261,25 @@ fi DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - if test $doRpath = yes; then + if test $doRpath = yes; then : CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' fi - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - if test "`uname -m`" = "alpha"; then + if test "`uname -m`" = "alpha"; then : CFLAGS="$CFLAGS -mieee" fi + if test $do64bit = yes; then : - if test $do64bit = yes; then - - echo "$as_me:$LINENO: checking if compiler accepts -m64 flag" >&5 -echo $ECHO_N "checking if compiler accepts -m64 flag... $ECHO_C" >&6 -if test "${tcl_cv_cc_m64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if compiler accepts -m64 flag" >&5 +$as_echo_n "checking if compiler accepts -m64 flag... " >&6; } +if ${tcl_cv_cc_m64+:} false; then : + $as_echo_n "(cached) " >&6 else hold_cflags=$CFLAGS CFLAGS="$CFLAGS -m64" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -5259,62 +5290,35 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_cc_m64=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cc_m64=no + tcl_cv_cc_m64=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext CFLAGS=$hold_cflags fi -echo "$as_me:$LINENO: result: $tcl_cv_cc_m64" >&5 -echo "${ECHO_T}$tcl_cv_cc_m64" >&6 - if test $tcl_cv_cc_m64 = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cc_m64" >&5 +$as_echo "$tcl_cv_cc_m64" >&6; } + if test $tcl_cv_cc_m64 = yes; then : CFLAGS="$CFLAGS -m64" do64bit_ok=yes fi - fi - # The combo of gcc + glibc has a bug related to inlining of # functions like strtod(). The -fno-builtin flag should address # this problem but it does not work. The -fno-inline flag is kind # of overkill but it works. Disable inlining only when one of the # files in compat/*.c is being linked in. - if test x"${USE_COMPAT}" != x; then + if test x"${USE_COMPAT}" != x; then : CFLAGS="$CFLAGS -fno-inline" fi - ;; Lynx*) SHLIB_CFLAGS="-fPIC" @@ -5324,12 +5328,11 @@ fi DL_OBJS="tclLoadDl.o" DL_LIBS="-mshared -ldl" LD_FLAGS="-Wl,--export-dynamic" - if test $doRpath = yes; then + if test $doRpath = yes; then : CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' fi - ;; MP-RAS-02*) SHLIB_CFLAGS="-K PIC" @@ -5375,11 +5378,10 @@ fi SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" - if test $doRpath = yes; then + if test $doRpath = yes; then : CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' fi - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.${SHLIB_VERSION}' LDFLAGS="-Wl,-export-dynamic" @@ -5396,7 +5398,7 @@ fi CFLAGS_OPTIMIZE="-O2" ;; esac - if test "${TCL_THREADS}" = "1"; then + if test "${TCL_THREADS}" = "1"; then : # On OpenBSD: Compile with -pthread # Don't link with -lpthread @@ -5404,7 +5406,6 @@ fi CFLAGS="$CFLAGS -pthread" fi - # OpenBSD doesn't do version numbers with dots. UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' TCL_LIB_VERSIONS_OK=nodots @@ -5417,13 +5418,12 @@ fi DL_OBJS="tclLoadDl.o" DL_LIBS="" LDFLAGS="$LDFLAGS -export-dynamic" - if test $doRpath = yes; then + if test $doRpath = yes; then : CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' fi - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - if test "${TCL_THREADS}" = "1"; then + if test "${TCL_THREADS}" = "1"; then : # The -pthread needs to go in the CFLAGS, not LIBS LIBS=`echo $LIBS | sed s/-pthread//` @@ -5431,7 +5431,6 @@ fi LDFLAGS="$LDFLAGS -pthread" fi - ;; FreeBSD-*) # This configuration from FreeBSD Ports. @@ -5442,20 +5441,18 @@ fi DL_OBJS="tclLoadDl.o" DL_LIBS="" LDFLAGS="" - if test $doRpath = yes; then + if test $doRpath = yes; then : CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' fi - - if test "${TCL_THREADS}" = "1"; then + if test "${TCL_THREADS}" = "1"; then : # The -pthread needs to go in the LDFLAGS, not LIBS LIBS=`echo $LIBS | sed s/-pthread//` CFLAGS="$CFLAGS $PTHREAD_CFLAGS" LDFLAGS="$LDFLAGS $PTHREAD_LIBS" fi - case $system in FreeBSD-3.*) # Version numbers are dot-stripped by system policy. @@ -5478,23 +5475,19 @@ fi CFLAGS="`echo " ${CFLAGS}" | \ awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ if (!($i~/^(isysroot|mmacosx-version-min)/)) print "-"$i}'`" - if test $do64bit = yes; then + if test $do64bit = yes; then : case `arch` in ppc) - echo "$as_me:$LINENO: checking if compiler accepts -arch ppc64 flag" >&5 -echo $ECHO_N "checking if compiler accepts -arch ppc64 flag... $ECHO_C" >&6 -if test "${tcl_cv_cc_arch_ppc64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if compiler accepts -arch ppc64 flag" >&5 +$as_echo_n "checking if compiler accepts -arch ppc64 flag... " >&6; } +if ${tcl_cv_cc_arch_ppc64+:} false; then : + $as_echo_n "(cached) " >&6 else hold_cflags=$CFLAGS CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -5505,62 +5498,33 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_cc_arch_ppc64=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cc_arch_ppc64=no + tcl_cv_cc_arch_ppc64=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext CFLAGS=$hold_cflags fi -echo "$as_me:$LINENO: result: $tcl_cv_cc_arch_ppc64" >&5 -echo "${ECHO_T}$tcl_cv_cc_arch_ppc64" >&6 - if test $tcl_cv_cc_arch_ppc64 = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cc_arch_ppc64" >&5 +$as_echo "$tcl_cv_cc_arch_ppc64" >&6; } + if test $tcl_cv_cc_arch_ppc64 = yes; then : CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" do64bit_ok=yes -fi -;; +fi;; i386) - echo "$as_me:$LINENO: checking if compiler accepts -arch x86_64 flag" >&5 -echo $ECHO_N "checking if compiler accepts -arch x86_64 flag... $ECHO_C" >&6 -if test "${tcl_cv_cc_arch_x86_64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if compiler accepts -arch x86_64 flag" >&5 +$as_echo_n "checking if compiler accepts -arch x86_64 flag... " >&6; } +if ${tcl_cv_cc_arch_x86_64+:} false; then : + $as_echo_n "(cached) " >&6 else hold_cflags=$CFLAGS CFLAGS="$CFLAGS -arch x86_64" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -5571,79 +5535,48 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_cc_arch_x86_64=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cc_arch_x86_64=no + tcl_cv_cc_arch_x86_64=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext CFLAGS=$hold_cflags fi -echo "$as_me:$LINENO: result: $tcl_cv_cc_arch_x86_64" >&5 -echo "${ECHO_T}$tcl_cv_cc_arch_x86_64" >&6 - if test $tcl_cv_cc_arch_x86_64 = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cc_arch_x86_64" >&5 +$as_echo "$tcl_cv_cc_arch_x86_64" >&6; } + if test $tcl_cv_cc_arch_x86_64 = yes; then : CFLAGS="$CFLAGS -arch x86_64" do64bit_ok=yes -fi -;; +fi;; *) - { echo "$as_me:$LINENO: WARNING: Don't know how enable 64-bit on architecture \`arch\`" >&5 -echo "$as_me: WARNING: Don't know how enable 64-bit on architecture \`arch\`" >&2;};; + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Don't know how enable 64-bit on architecture \`arch\`" >&5 +$as_echo "$as_me: WARNING: Don't know how enable 64-bit on architecture \`arch\`" >&2;};; esac else # Check for combined 32-bit and 64-bit fat build if echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ - && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '; then + && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '; then : fat_32_64=yes fi - fi - SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS}' - echo "$as_me:$LINENO: checking if ld accepts -single_module flag" >&5 -echo $ECHO_N "checking if ld accepts -single_module flag... $ECHO_C" >&6 -if test "${tcl_cv_ld_single_module+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if ld accepts -single_module flag" >&5 +$as_echo_n "checking if ld accepts -single_module flag... " >&6; } +if ${tcl_cv_ld_single_module+:} false; then : + $as_echo_n "(cached) " >&6 else hold_ldflags=$LDFLAGS LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -5654,71 +5587,41 @@ int i; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_ld_single_module=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_ld_single_module=no + tcl_cv_ld_single_module=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LDFLAGS=$hold_ldflags fi -echo "$as_me:$LINENO: result: $tcl_cv_ld_single_module" >&5 -echo "${ECHO_T}$tcl_cv_ld_single_module" >&6 - if test $tcl_cv_ld_single_module = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_ld_single_module" >&5 +$as_echo "$tcl_cv_ld_single_module" >&6; } + if test $tcl_cv_ld_single_module = yes; then : SHLIB_LD="${SHLIB_LD} -Wl,-single_module" fi - SHLIB_SUFFIX=".dylib" DL_OBJS="tclLoadDyld.o" DL_LIBS="" # Don't use -prebind when building for Mac OS X 10.4 or later only: if test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int($2)}'`" -lt 4 -a \ - "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int($2)}'`" -lt 4; then + "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int($2)}'`" -lt 4; then : LDFLAGS="$LDFLAGS -prebind" fi - LDFLAGS="$LDFLAGS -headerpad_max_install_names" - echo "$as_me:$LINENO: checking if ld accepts -search_paths_first flag" >&5 -echo $ECHO_N "checking if ld accepts -search_paths_first flag... $ECHO_C" >&6 -if test "${tcl_cv_ld_search_paths_first+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if ld accepts -search_paths_first flag" >&5 +$as_echo_n "checking if ld accepts -search_paths_first flag... " >&6; } +if ${tcl_cv_ld_search_paths_first+:} false; then : + $as_echo_n "(cached) " >&6 else hold_ldflags=$LDFLAGS LDFLAGS="$LDFLAGS -Wl,-search_paths_first" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -5729,88 +5632,58 @@ int i; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_ld_search_paths_first=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_ld_search_paths_first=no + tcl_cv_ld_search_paths_first=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LDFLAGS=$hold_ldflags fi -echo "$as_me:$LINENO: result: $tcl_cv_ld_search_paths_first" >&5 -echo "${ECHO_T}$tcl_cv_ld_search_paths_first" >&6 - if test $tcl_cv_ld_search_paths_first = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_ld_search_paths_first" >&5 +$as_echo "$tcl_cv_ld_search_paths_first" >&6; } + if test $tcl_cv_ld_search_paths_first = yes; then : LDFLAGS="$LDFLAGS -Wl,-search_paths_first" fi - - if test "$tcl_cv_cc_visibility_hidden" != yes; then + if test "$tcl_cv_cc_visibility_hidden" != yes; then : -cat >>confdefs.h <<\_ACEOF -#define MODULE_SCOPE __private_extern__ -_ACEOF +$as_echo "#define MODULE_SCOPE __private_extern__" >>confdefs.h fi - CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" -cat >>confdefs.h <<\_ACEOF -#define MAC_OSX_TCL 1 -_ACEOF +$as_echo "#define MAC_OSX_TCL 1" >>confdefs.h PLAT_OBJS='${MAC_OSX_OBJS}' PLAT_SRCS='${MAC_OSX_SRCS}' - echo "$as_me:$LINENO: checking whether to use CoreFoundation" >&5 -echo $ECHO_N "checking whether to use CoreFoundation... $ECHO_C" >&6 - # Check whether --enable-corefoundation or --disable-corefoundation was given. -if test "${enable_corefoundation+set}" = set; then - enableval="$enable_corefoundation" - tcl_corefoundation=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use CoreFoundation" >&5 +$as_echo_n "checking whether to use CoreFoundation... " >&6; } + # Check whether --enable-corefoundation was given. +if test "${enable_corefoundation+set}" = set; then : + enableval=$enable_corefoundation; tcl_corefoundation=$enableval else tcl_corefoundation=yes -fi; - echo "$as_me:$LINENO: result: $tcl_corefoundation" >&5 -echo "${ECHO_T}$tcl_corefoundation" >&6 - if test $tcl_corefoundation = yes; then +fi - echo "$as_me:$LINENO: checking for CoreFoundation.framework" >&5 -echo $ECHO_N "checking for CoreFoundation.framework... $ECHO_C" >&6 -if test "${tcl_cv_lib_corefoundation+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_corefoundation" >&5 +$as_echo "$tcl_corefoundation" >&6; } + if test $tcl_corefoundation = yes; then : + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CoreFoundation.framework" >&5 +$as_echo_n "checking for CoreFoundation.framework... " >&6; } +if ${tcl_cv_lib_corefoundation+:} false; then : + $as_echo_n "(cached) " >&6 else hold_libs=$LIBS - if test "$fat_32_64" = yes; then + if test "$fat_32_64" = yes; then : for v in CFLAGS CPPFLAGS LDFLAGS; do # On Tiger there is no 64-bit CF, so remove 64-bit @@ -5820,13 +5693,8 @@ else eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' done fi - LIBS="$LIBS -framework CoreFoundation" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -5837,77 +5705,45 @@ CFBundleRef b = CFBundleGetMainBundle(); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_lib_corefoundation=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_lib_corefoundation=no + tcl_cv_lib_corefoundation=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test "$fat_32_64" = yes; then +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test "$fat_32_64" = yes; then : for v in CFLAGS CPPFLAGS LDFLAGS; do eval $v'="$hold_'$v'"' done fi - LIBS=$hold_libs fi -echo "$as_me:$LINENO: result: $tcl_cv_lib_corefoundation" >&5 -echo "${ECHO_T}$tcl_cv_lib_corefoundation" >&6 - if test $tcl_cv_lib_corefoundation = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_lib_corefoundation" >&5 +$as_echo "$tcl_cv_lib_corefoundation" >&6; } + if test $tcl_cv_lib_corefoundation = yes; then : LIBS="$LIBS -framework CoreFoundation" -cat >>confdefs.h <<\_ACEOF -#define HAVE_COREFOUNDATION 1 -_ACEOF +$as_echo "#define HAVE_COREFOUNDATION 1" >>confdefs.h else tcl_corefoundation=no fi + if test "$fat_32_64" = yes -a $tcl_corefoundation = yes; then : - if test "$fat_32_64" = yes -a $tcl_corefoundation = yes; then - - echo "$as_me:$LINENO: checking for 64-bit CoreFoundation" >&5 -echo $ECHO_N "checking for 64-bit CoreFoundation... $ECHO_C" >&6 -if test "${tcl_cv_lib_corefoundation_64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit CoreFoundation" >&5 +$as_echo_n "checking for 64-bit CoreFoundation... " >&6; } +if ${tcl_cv_lib_corefoundation_64+:} false; then : + $as_echo_n "(cached) " >&6 else for v in CFLAGS CPPFLAGS LDFLAGS; do eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' done - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -5918,60 +5754,31 @@ CFBundleRef b = CFBundleGetMainBundle(); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_lib_corefoundation_64=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_lib_corefoundation_64=no + tcl_cv_lib_corefoundation_64=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext for v in CFLAGS CPPFLAGS LDFLAGS; do eval $v'="$hold_'$v'"' done fi -echo "$as_me:$LINENO: result: $tcl_cv_lib_corefoundation_64" >&5 -echo "${ECHO_T}$tcl_cv_lib_corefoundation_64" >&6 - if test $tcl_cv_lib_corefoundation_64 = no; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_lib_corefoundation_64" >&5 +$as_echo "$tcl_cv_lib_corefoundation_64" >&6; } + if test $tcl_cv_lib_corefoundation_64 = no; then : -cat >>confdefs.h <<\_ACEOF -#define NO_COREFOUNDATION_64 1 -_ACEOF +$as_echo "#define NO_COREFOUNDATION_64 1" >>confdefs.h LDFLAGS="$LDFLAGS -Wl,-no_arch_warnings" fi - fi - fi - ;; NEXTSTEP-*) SHLIB_CFLAGS="" @@ -5987,9 +5794,7 @@ fi SHLIB_LD_LIBS="" CFLAGS_OPTIMIZE="" # Optimizer is buggy -cat >>confdefs.h <<\_ACEOF -#define _OE_SOCKETS 1 -_ACEOF +$as_echo "#define _OE_SOCKETS 1" >>confdefs.h ;; OSF1-1.0|OSF1-1.1|OSF1-1.2) @@ -6007,14 +5812,13 @@ _ACEOF OSF1-1.*) # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 SHLIB_CFLAGS="-fPIC" - if test "$SHARED_BUILD" = 1; then + if test "$SHARED_BUILD" = 1; then : SHLIB_LD="ld -shared" else SHLIB_LD="ld -non_shared" fi - SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" @@ -6025,7 +5829,7 @@ fi OSF1-V*) # Digital OSF/1 SHLIB_CFLAGS="" - if test "$SHARED_BUILD" = 1; then + if test "$SHARED_BUILD" = 1; then : SHLIB_LD='ld -shared -expect_unresolved "*"' @@ -6034,30 +5838,27 @@ else SHLIB_LD='ld -non_shared -expect_unresolved "*"' fi - SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" - if test $doRpath = yes; then + if test $doRpath = yes; then : CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' fi - - if test "$GCC" = yes; then + if test "$GCC" = yes; then : CFLAGS="$CFLAGS -mieee" else CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee" fi - # see pthread_intro(3) for pthread support on osf1, k.furukawa - if test "${TCL_THREADS}" = 1; then + if test "${TCL_THREADS}" = 1; then : CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" LIBS=`echo $LIBS | sed s/-lpthreads//` - if test "$GCC" = yes; then + if test "$GCC" = yes; then : LIBS="$LIBS -lpthread -lmach -lexc" @@ -6068,9 +5869,7 @@ else fi - fi - ;; QNX-6*) # QNX RTP @@ -6089,7 +5888,7 @@ fi # Note, dlopen is available only on SCO 3.2.5 and greater. However, # this test works, since "uname -s" was non-standard in 3.2.4 and # below. - if test "$GCC" = yes; then + if test "$GCC" = yes; then : SHLIB_CFLAGS="-fPIC -melf" LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" @@ -6100,7 +5899,6 @@ else LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" fi - SHLIB_LD="ld -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" @@ -6145,21 +5943,17 @@ fi # won't define thread-safe library routines. -cat >>confdefs.h <<\_ACEOF -#define _REENTRANT 1 -_ACEOF +$as_echo "#define _REENTRANT 1" >>confdefs.h -cat >>confdefs.h <<\_ACEOF -#define _POSIX_PTHREAD_SEMANTICS 1 -_ACEOF +$as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h SHLIB_CFLAGS="-KPIC" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" - if test "$GCC" = yes; then + if test "$GCC" = yes; then : SHLIB_LD='${CC} -shared' CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' @@ -6172,37 +5966,32 @@ else LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} fi - ;; SunOS-5*) # Note: If _REENTRANT isn't defined, then Solaris # won't define thread-safe library routines. -cat >>confdefs.h <<\_ACEOF -#define _REENTRANT 1 -_ACEOF +$as_echo "#define _REENTRANT 1" >>confdefs.h -cat >>confdefs.h <<\_ACEOF -#define _POSIX_PTHREAD_SEMANTICS 1 -_ACEOF +$as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h SHLIB_CFLAGS="-KPIC" # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = yes; then + if test "$do64bit" = yes; then : arch=`isainfo` - if test "$arch" = "sparcv9 sparc"; then + if test "$arch" = "sparcv9 sparc"; then : - if test "$GCC" = yes; then + if test "$GCC" = yes; then : - if test "`${CC} -dumpversion | awk -F. '{print $1}'`" -lt 3; then + if test "`${CC} -dumpversion | awk -F. '{print $1}'`" -lt 3; then : - { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&5 -echo "$as_me: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&5 +$as_echo "$as_me: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&2;} else @@ -6213,11 +6002,10 @@ else fi - else do64bit_ok=yes - if test "$do64bitVIS" = yes; then + if test "$do64bitVIS" = yes; then : CFLAGS="$CFLAGS -xarch=v9a" LDFLAGS_ARCH="-xarch=v9a" @@ -6228,17 +6016,15 @@ else LDFLAGS_ARCH="-xarch=v9" fi - # Solaris 64 uses this as well #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" fi - else - if test "$arch" = "amd64 i386"; then + if test "$arch" = "amd64 i386"; then : - if test "$GCC" = yes; then + if test "$GCC" = yes; then : case $system in SunOS-5.1[1-9]*|SunOS-5.[2-9][0-9]*) @@ -6246,8 +6032,8 @@ else CFLAGS="$CFLAGS -m64" LDFLAGS="$LDFLAGS -m64";; *) - { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC on $system" >&5 -echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;};; + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit mode not supported with GCC on $system" >&5 +$as_echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;};; esac else @@ -6264,169 +6050,32 @@ else fi - else - { echo "$as_me:$LINENO: WARNING: 64bit mode not supported for $arch" >&5 -echo "$as_me: WARNING: 64bit mode not supported for $arch" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit mode not supported for $arch" >&5 +$as_echo "$as_me: WARNING: 64bit mode not supported for $arch" >&2;} fi - fi - fi - #-------------------------------------------------------------------- # On Solaris 5.x i386 with the sunpro compiler we need to link # with sunmath to get floating point rounding control #-------------------------------------------------------------------- - if test "$GCC" = yes; then + if test "$GCC" = yes; then : use_sunmath=no else arch=`isainfo` - echo "$as_me:$LINENO: checking whether to use -lsunmath for fp rounding control" >&5 -echo $ECHO_N "checking whether to use -lsunmath for fp rounding control... $ECHO_C" >&6 - if test "$arch" = "amd64 i386" -o "$arch" = "i386"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use -lsunmath for fp rounding control" >&5 +$as_echo_n "checking whether to use -lsunmath for fp rounding control... " >&6; } + if test "$arch" = "amd64 i386" -o "$arch" = "i386"; then : - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } MATH_LIBS="-lsunmath $MATH_LIBS" - if test "${ac_cv_header_sunmath_h+set}" = set; then - echo "$as_me:$LINENO: checking for sunmath.h" >&5 -echo $ECHO_N "checking for sunmath.h... $ECHO_C" >&6 -if test "${ac_cv_header_sunmath_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_sunmath_h" >&5 -echo "${ECHO_T}$ac_cv_header_sunmath_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking sunmath.h usability" >&5 -echo $ECHO_N "checking sunmath.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking sunmath.h presence" >&5 -echo $ECHO_N "checking sunmath.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: sunmath.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: sunmath.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: sunmath.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: sunmath.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: sunmath.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: sunmath.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: sunmath.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: sunmath.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: sunmath.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: sunmath.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: sunmath.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: sunmath.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: sunmath.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: sunmath.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: sunmath.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: sunmath.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ----------------------------- ## -## Report this to the tk lists. ## -## ----------------------------- ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for sunmath.h" >&5 -echo $ECHO_N "checking for sunmath.h... $ECHO_C" >&6 -if test "${ac_cv_header_sunmath_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_sunmath_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_sunmath_h" >&5 -echo "${ECHO_T}$ac_cv_header_sunmath_h" >&6 + ac_fn_c_check_header_mongrel "$LINENO" "sunmath.h" "ac_cv_header_sunmath_h" "$ac_includes_default" +if test "x$ac_cv_header_sunmath_h" = xyes; then : fi @@ -6435,26 +6084,24 @@ fi else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } use_sunmath=no fi - fi - SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" - if test "$GCC" = yes; then + if test "$GCC" = yes; then : SHLIB_LD='${CC} -shared' CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - if test "$do64bit_ok" = yes; then + if test "$do64bit_ok" = yes; then : - if test "$arch" = "sparcv9 sparc"; then + if test "$arch" = "sparcv9 sparc"; then : # We need to specify -static-libgcc or we need to # add the path to the sparv9 libgcc. @@ -6465,26 +6112,22 @@ fi #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" else - if test "$arch" = "amd64 i386"; then + if test "$arch" = "amd64 i386"; then : SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" fi - fi - fi - else - if test "$use_sunmath" = yes; then + if test "$use_sunmath" = yes; then : textmode=textoff else textmode=text fi - case $system in SunOS-5.[1-9][0-9]*|SunOS-5.[7-9]) SHLIB_LD="\${CC} -G -z $textmode \${LDFLAGS}";; @@ -6495,7 +6138,6 @@ fi LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' fi - ;; UNIX_SV* | UnixWare-5*) SHLIB_CFLAGS="-KPIC" @@ -6506,19 +6148,15 @@ fi DL_LIBS="-ldl" # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers # that don't grok the -Bexport option. Test that it does. - echo "$as_me:$LINENO: checking for ld accepts -Bexport flag" >&5 -echo $ECHO_N "checking for ld accepts -Bexport flag... $ECHO_C" >&6 -if test "${tcl_cv_ld_Bexport+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld accepts -Bexport flag" >&5 +$as_echo_n "checking for ld accepts -Bexport flag... " >&6; } +if ${tcl_cv_ld_Bexport+:} false; then : + $as_echo_n "(cached) " >&6 else hold_ldflags=$LDFLAGS LDFLAGS="$LDFLAGS -Wl,-Bexport" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -6529,93 +6167,63 @@ int i; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_ld_Bexport=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_ld_Bexport=no + tcl_cv_ld_Bexport=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LDFLAGS=$hold_ldflags fi -echo "$as_me:$LINENO: result: $tcl_cv_ld_Bexport" >&5 -echo "${ECHO_T}$tcl_cv_ld_Bexport" >&6 - if test $tcl_cv_ld_Bexport = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_ld_Bexport" >&5 +$as_echo "$tcl_cv_ld_Bexport" >&6; } + if test $tcl_cv_ld_Bexport = yes; then : LDFLAGS="$LDFLAGS -Wl,-Bexport" fi - CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; esac - if test "$do64bit" = yes -a "$do64bit_ok" = no; then + if test "$do64bit" = yes -a "$do64bit_ok" = no; then : - { echo "$as_me:$LINENO: WARNING: 64bit support being disabled -- don't know magic for this platform" >&5 -echo "$as_me: WARNING: 64bit support being disabled -- don't know magic for this platform" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 64bit support being disabled -- don't know magic for this platform" >&5 +$as_echo "$as_me: WARNING: 64bit support being disabled -- don't know magic for this platform" >&2;} fi - - if test "$do64bit" = yes -a "$do64bit_ok" = yes; then + if test "$do64bit" = yes -a "$do64bit_ok" = yes; then : -cat >>confdefs.h <<\_ACEOF -#define TCL_CFG_DO64BIT 1 -_ACEOF +$as_echo "#define TCL_CFG_DO64BIT 1" >>confdefs.h fi - # Step 4: disable dynamic loading if requested via a command-line switch. - # Check whether --enable-load or --disable-load was given. -if test "${enable_load+set}" = set; then - enableval="$enable_load" - tcl_ok=$enableval + # Check whether --enable-load was given. +if test "${enable_load+set}" = set; then : + enableval=$enable_load; tcl_ok=$enableval else tcl_ok=yes -fi; - if test "$tcl_ok" = no; then - DL_OBJS="" fi + if test "$tcl_ok" = no; then : + DL_OBJS="" +fi - if test "x$DL_OBJS" != x; then + if test "x$DL_OBJS" != x; then : BUILD_DLTEST="\$(DLTEST_TARGETS)" else - { echo "$as_me:$LINENO: WARNING: Can't figure out how to do dynamic loading or shared libraries on this system." >&5 -echo "$as_me: WARNING: Can't figure out how to do dynamic loading or shared libraries on this system." >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Can't figure out how to do dynamic loading or shared libraries on this system." >&5 +$as_echo "$as_me: WARNING: Can't figure out how to do dynamic loading or shared libraries on this system." >&2;} SHLIB_CFLAGS="" SHLIB_LD="" SHLIB_SUFFIX="" @@ -6627,14 +6235,13 @@ echo "$as_me: WARNING: Can't figure out how to do dynamic loading or shared libr BUILD_DLTEST="" fi - LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" # If we're running gcc, then change the C flags for compiling shared # libraries to the right flags for gcc, instead of those for the # standard manufacturer compiler. - if test "$DL_OBJS" != "tclLoadNone.o" -a "$GCC" = yes; then + if test "$DL_OBJS" != "tclLoadNone.o" -a "$GCC" = yes; then : case $system in AIX-*) ;; @@ -6648,35 +6255,29 @@ fi esac fi + if test "$tcl_cv_cc_visibility_hidden" != yes; then : - if test "$tcl_cv_cc_visibility_hidden" != yes; then - -cat >>confdefs.h <<\_ACEOF -#define MODULE_SCOPE extern -_ACEOF +$as_echo "#define MODULE_SCOPE extern" >>confdefs.h fi - - if test "$SHARED_LIB_SUFFIX" = ""; then + if test "$SHARED_LIB_SUFFIX" = ""; then : SHARED_LIB_SUFFIX='${VERSION}${SHLIB_SUFFIX}' fi - - if test "$UNSHARED_LIB_SUFFIX" = ""; then + if test "$UNSHARED_LIB_SUFFIX" = ""; then : UNSHARED_LIB_SUFFIX='${VERSION}.a' fi - DLL_INSTALL_DIR="\$(LIB_INSTALL_DIR)" - if test "${SHARED_BUILD}" = 1 -a "${SHLIB_SUFFIX}" != ""; then + if test "${SHARED_BUILD}" = 1 -a "${SHLIB_SUFFIX}" != ""; then : LIB_SUFFIX=${SHARED_LIB_SUFFIX} MAKE_LIB='${SHLIB_LD} -o $@ ${OBJS} ${SHLIB_LD_LIBS} ${TCL_SHLIB_LD_EXTRAS} ${TK_SHLIB_LD_EXTRAS} ${LD_SEARCH_FLAGS}' - if test "${SHLIB_SUFFIX}" = ".dll"; then + if test "${SHLIB_SUFFIX}" = ".dll"; then : INSTALL_LIB='$(INSTALL_LIBRARY) $(LIB_FILE) "$(BIN_INSTALL_DIR)/$(LIB_FILE)";if test -f $(LIB_FILE).a; then $(INSTALL_DATA) $(LIB_FILE).a "$(LIB_INSTALL_DIR)"; fi;' DLL_INSTALL_DIR="\$(BIN_INSTALL_DIR)" @@ -6687,12 +6288,11 @@ else fi - else LIB_SUFFIX=${UNSHARED_LIB_SUFFIX} - if test "$RANLIB" = ""; then + if test "$RANLIB" = ""; then : MAKE_LIB='$(STLIB_LD) $@ ${OBJS}' @@ -6701,14 +6301,12 @@ else MAKE_LIB='${STLIB_LD} $@ ${OBJS} ; ${RANLIB} $@' fi - INSTALL_LIB='$(INSTALL_LIBRARY) $(LIB_FILE) "$(LIB_INSTALL_DIR)/$(LIB_FILE)"' fi - # Stub lib does not depend on shared/static configuration - if test "$RANLIB" = ""; then + if test "$RANLIB" = ""; then : MAKE_STUB_LIB='${STLIB_LD} $@ ${STUB_LIB_OBJS}' @@ -6717,33 +6315,27 @@ else MAKE_STUB_LIB='${STLIB_LD} $@ ${STUB_LIB_OBJS} ; ${RANLIB} $@' fi - INSTALL_STUB_LIB='$(INSTALL_LIBRARY) $(STUB_LIB_FILE) "$(LIB_INSTALL_DIR)/$(STUB_LIB_FILE)"' # Define TCL_LIBS now that we know what DL_LIBS is. # The trick here is that we don't want to change the value of TCL_LIBS if # it is already set when tclConfig.sh had been loaded by Tk. - if test "x${TCL_LIBS}" = x; then + if test "x${TCL_LIBS}" = x; then : TCL_LIBS="${DL_LIBS} ${LIBS} ${MATH_LIBS}" fi - # See if the compiler supports casting to a union type. # This is used to stop gcc from printing a compiler # warning when initializing a union member. - echo "$as_me:$LINENO: checking for cast to union support" >&5 -echo $ECHO_N "checking for cast to union support... $ECHO_C" >&6 -if test "${tcl_cv_cast_to_union+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cast to union support" >&5 +$as_echo_n "checking for cast to union support... " >&6; } +if ${tcl_cv_cast_to_union+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -6757,45 +6349,19 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_cast_to_union=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cast_to_union=no + tcl_cv_cast_to_union=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $tcl_cv_cast_to_union" >&5 -echo "${ECHO_T}$tcl_cv_cast_to_union" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cast_to_union" >&5 +$as_echo "$tcl_cv_cast_to_union" >&6; } if test "$tcl_cv_cast_to_union" = "yes"; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_CAST_TO_UNION 1 -_ACEOF +$as_echo "#define HAVE_CAST_TO_UNION 1" >>confdefs.h fi @@ -6841,38 +6407,34 @@ _ACEOF - echo "$as_me:$LINENO: checking for build with symbols" >&5 -echo $ECHO_N "checking for build with symbols... $ECHO_C" >&6 - # Check whether --enable-symbols or --disable-symbols was given. -if test "${enable_symbols+set}" = set; then - enableval="$enable_symbols" - tcl_ok=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for build with symbols" >&5 +$as_echo_n "checking for build with symbols... " >&6; } + # Check whether --enable-symbols was given. +if test "${enable_symbols+set}" = set; then : + enableval=$enable_symbols; tcl_ok=$enableval else tcl_ok=no -fi; +fi + # FIXME: Currently, LDFLAGS_DEFAULT is not used, it should work like CFLAGS_DEFAULT. DBGX="" if test "$tcl_ok" = "no"; then CFLAGS_DEFAULT='$(CFLAGS_OPTIMIZE)' LDFLAGS_DEFAULT='$(LDFLAGS_OPTIMIZE)' -cat >>confdefs.h <<\_ACEOF -#define NDEBUG 1 -_ACEOF +$as_echo "#define NDEBUG 1" >>confdefs.h - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } -cat >>confdefs.h <<\_ACEOF -#define TCL_CFG_OPTIMIZED 1 -_ACEOF +$as_echo "#define TCL_CFG_OPTIMIZED 1" >>confdefs.h else CFLAGS_DEFAULT='$(CFLAGS_DEBUG)' LDFLAGS_DEFAULT='$(LDFLAGS_DEBUG)' if test "$tcl_ok" = "yes"; then - echo "$as_me:$LINENO: result: yes (standard debugging)" >&5 -echo "${ECHO_T}yes (standard debugging)" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes (standard debugging)" >&5 +$as_echo "yes (standard debugging)" >&6; } fi fi @@ -6880,9 +6442,7 @@ echo "${ECHO_T}yes (standard debugging)" >&6 if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then -cat >>confdefs.h <<\_ACEOF -#define TCL_MEM_DEBUG 1 -_ACEOF +$as_echo "#define TCL_MEM_DEBUG 1" >>confdefs.h fi @@ -6890,11 +6450,11 @@ _ACEOF if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then if test "$tcl_ok" = "all"; then - echo "$as_me:$LINENO: result: enabled symbols mem debugging" >&5 -echo "${ECHO_T}enabled symbols mem debugging" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: enabled symbols mem debugging" >&5 +$as_echo "enabled symbols mem debugging" >&6; } else - echo "$as_me:$LINENO: result: enabled $tcl_ok debugging" >&5 -echo "${ECHO_T}enabled $tcl_ok debugging" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: enabled $tcl_ok debugging" >&5 +$as_echo "enabled $tcl_ok debugging" >&6; } fi fi @@ -6904,18 +6464,14 @@ echo "${ECHO_T}enabled $tcl_ok debugging" >&6 #-------------------------------------------------------------------- - echo "$as_me:$LINENO: checking for required early compiler flags" >&5 -echo $ECHO_N "checking for required early compiler flags... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for required early compiler flags" >&5 +$as_echo_n "checking for required early compiler flags... " >&6; } tcl_flags="" - if test "${tcl_cv_flag__isoc99_source+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + if ${tcl_cv_flag__isoc99_source+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -6926,38 +6482,10 @@ char *p = (char *)strtoll; char *q = (char *)strtoull; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_flag__isoc99_source=no else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #define _ISOC99_SOURCE 1 #include @@ -6969,58 +6497,28 @@ char *p = (char *)strtoll; char *q = (char *)strtoull; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_flag__isoc99_source=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_flag__isoc99_source=no + tcl_cv_flag__isoc99_source=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi if test "x${tcl_cv_flag__isoc99_source}" = "xyes" ; then -cat >>confdefs.h <<\_ACEOF -#define _ISOC99_SOURCE 1 -_ACEOF +$as_echo "#define _ISOC99_SOURCE 1" >>confdefs.h tcl_flags="$tcl_flags _ISOC99_SOURCE" fi - if test "${tcl_cv_flag__largefile64_source+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + if ${tcl_cv_flag__largefile64_source+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -7031,38 +6529,10 @@ struct stat64 buf; int i = stat64("/", &buf); return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_flag__largefile64_source=no else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #define _LARGEFILE64_SOURCE 1 #include @@ -7074,58 +6544,28 @@ struct stat64 buf; int i = stat64("/", &buf); return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_flag__largefile64_source=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_flag__largefile64_source=no + tcl_cv_flag__largefile64_source=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi if test "x${tcl_cv_flag__largefile64_source}" = "xyes" ; then -cat >>confdefs.h <<\_ACEOF -#define _LARGEFILE64_SOURCE 1 -_ACEOF +$as_echo "#define _LARGEFILE64_SOURCE 1" >>confdefs.h tcl_flags="$tcl_flags _LARGEFILE64_SOURCE" fi - if test "${tcl_cv_flag__largefile_source64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + if ${tcl_cv_flag__largefile_source64+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -7136,38 +6576,10 @@ char *p = (char *)open64; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_flag__largefile_source64=no else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #define _LARGEFILE_SOURCE64 1 #include @@ -7179,72 +6591,42 @@ char *p = (char *)open64; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_flag__largefile_source64=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_flag__largefile_source64=no + tcl_cv_flag__largefile_source64=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi if test "x${tcl_cv_flag__largefile_source64}" = "xyes" ; then -cat >>confdefs.h <<\_ACEOF -#define _LARGEFILE_SOURCE64 1 -_ACEOF +$as_echo "#define _LARGEFILE_SOURCE64 1" >>confdefs.h tcl_flags="$tcl_flags _LARGEFILE_SOURCE64" fi if test "x${tcl_flags}" = "x" ; then - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } else - echo "$as_me:$LINENO: result: ${tcl_flags}" >&5 -echo "${ECHO_T}${tcl_flags}" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${tcl_flags}" >&5 +$as_echo "${tcl_flags}" >&6; } fi - echo "$as_me:$LINENO: checking for 64-bit integer type" >&5 -echo $ECHO_N "checking for 64-bit integer type... $ECHO_C" >&6 - if test "${tcl_cv_type_64bit+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit integer type" >&5 +$as_echo_n "checking for 64-bit integer type... " >&6; } + if ${tcl_cv_type_64bit+:} false; then : + $as_echo_n "(cached) " >&6 else tcl_cv_type_64bit=none # See if the compiler knows natively about __int64 - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -7255,44 +6637,16 @@ __int64 value = (__int64) 0; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_type_64bit=__int64 else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_type_64bit="long long" + tcl_type_64bit="long long" fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext # See if we should use long anyway Note that we substitute in the # type that is our current guess for a 64-bit type inside this check # program, so it should be modified only carefully... - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -7305,66 +6659,35 @@ switch (0) { return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_type_64bit=${tcl_type_64bit} -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi if test "${tcl_cv_type_64bit}" = none ; then -cat >>confdefs.h <<\_ACEOF -#define TCL_WIDE_INT_IS_LONG 1 -_ACEOF +$as_echo "#define TCL_WIDE_INT_IS_LONG 1" >>confdefs.h - echo "$as_me:$LINENO: result: using long" >&5 -echo "${ECHO_T}using long" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: using long" >&5 +$as_echo "using long" >&6; } else cat >>confdefs.h <<_ACEOF #define TCL_WIDE_INT_TYPE ${tcl_cv_type_64bit} _ACEOF - echo "$as_me:$LINENO: result: ${tcl_cv_type_64bit}" >&5 -echo "${ECHO_T}${tcl_cv_type_64bit}" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${tcl_cv_type_64bit}" >&5 +$as_echo "${tcl_cv_type_64bit}" >&6; } # Now check for auxiliary declarations - echo "$as_me:$LINENO: checking for struct dirent64" >&5 -echo $ECHO_N "checking for struct dirent64... $ECHO_C" >&6 -if test "${tcl_cv_struct_dirent64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct dirent64" >&5 +$as_echo_n "checking for struct dirent64... " >&6; } +if ${tcl_cv_struct_dirent64+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -7376,58 +6699,28 @@ struct dirent64 p; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_struct_dirent64=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_struct_dirent64=no + tcl_cv_struct_dirent64=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $tcl_cv_struct_dirent64" >&5 -echo "${ECHO_T}$tcl_cv_struct_dirent64" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_struct_dirent64" >&5 +$as_echo "$tcl_cv_struct_dirent64" >&6; } if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_STRUCT_DIRENT64 1 -_ACEOF +$as_echo "#define HAVE_STRUCT_DIRENT64 1" >>confdefs.h fi - echo "$as_me:$LINENO: checking for struct stat64" >&5 -echo $ECHO_N "checking for struct stat64... $ECHO_C" >&6 -if test "${tcl_cv_struct_stat64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct stat64" >&5 +$as_echo_n "checking for struct stat64... " >&6; } +if ${tcl_cv_struct_stat64+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -7439,161 +6732,40 @@ struct stat64 p; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_struct_stat64=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_struct_stat64=no + tcl_cv_struct_stat64=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $tcl_cv_struct_stat64" >&5 -echo "${ECHO_T}$tcl_cv_struct_stat64" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_struct_stat64" >&5 +$as_echo "$tcl_cv_struct_stat64" >&6; } if test "x${tcl_cv_struct_stat64}" = "xyes" ; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_STRUCT_STAT64 1 -_ACEOF +$as_echo "#define HAVE_STRUCT_STAT64 1" >>confdefs.h fi - - -for ac_func in open64 lseek64 -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != $ac_func; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_var=no" -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then + for ac_func in open64 lseek64 +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done - echo "$as_me:$LINENO: checking for off64_t" >&5 -echo $ECHO_N "checking for off64_t... $ECHO_C" >&6 - if test "${tcl_cv_type_off64_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for off64_t" >&5 +$as_echo_n "checking for off64_t... " >&6; } + if ${tcl_cv_type_off64_t+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -7605,51 +6777,25 @@ off64_t offset; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_type_off64_t=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_type_off64_t=no + tcl_cv_type_off64_t=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi if test "x${tcl_cv_type_off64_t}" = "xyes" && \ test "x${ac_cv_func_lseek64}" = "xyes" && \ test "x${ac_cv_func_open64}" = "xyes" ; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_TYPE_OFF64_T 1 -_ACEOF +$as_echo "#define HAVE_TYPE_OFF64_T 1" >>confdefs.h - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi fi @@ -7658,235 +6804,229 @@ echo "${ECHO_T}no" >&6 # Check endianness because we can optimize some operations #-------------------------------------------------------------------- -echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 -echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 -if test "${ac_cv_c_bigendian+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 +$as_echo_n "checking whether byte ordering is bigendian... " >&6; } +if ${ac_cv_c_bigendian+:} false; then : + $as_echo_n "(cached) " >&6 else - # See if sys/param.h defines the BYTE_ORDER macro. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + ac_cv_c_bigendian=unknown + # See if we're dealing with a universal compiler. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifndef __APPLE_CC__ + not a universal capable compiler + #endif + typedef int dummy; + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + + # Check for potential -arch flags. It is not universal unless + # there are at least two -arch flags with different values. + ac_arch= + ac_prev= + for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do + if test -n "$ac_prev"; then + case $ac_word in + i?86 | x86_64 | ppc | ppc64) + if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then + ac_arch=$ac_word + else + ac_cv_c_bigendian=universal + break + fi + ;; + esac + ac_prev= + elif test "x$ac_word" = "x-arch"; then + ac_prev=arch + fi + done +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if test $ac_cv_c_bigendian = unknown; then + # See if sys/param.h defines the BYTE_ORDER macro. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include -#include + #include int main () { -#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN - bogus endian macros -#endif +#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \ + && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \ + && LITTLE_ENDIAN) + bogus endian macros + #endif ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : # It does; now see whether it defined to BIG_ENDIAN or not. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include -#include + #include int main () { #if BYTE_ORDER != BIG_ENDIAN - not big endian -#endif + not big endian + #endif ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_bigendian=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_c_bigendian=no + ac_cv_c_bigendian=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + if test $ac_cv_c_bigendian = unknown; then + # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include -# It does not; compile a test program. -if test "$cross_compiling" = yes; then - # try to guess the endianness by grepping values into an object file - ac_cv_c_bigendian=unknown - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +int +main () +{ +#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) + bogus endian macros + #endif + + ; + return 0; +} _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + # It does; now see whether it defined to _BIG_ENDIAN or not. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; -short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; -void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } -short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; -short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; -void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } +#include + int main () { - _ascii (); _ebcdic (); +#ifndef _BIG_ENDIAN + not big endian + #endif + ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_bigendian=yes +else + ac_cv_c_bigendian=no fi -if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then - if test "$ac_cv_c_bigendian" = unknown; then - ac_cv_c_bigendian=no - else - # finding both strings is unlikely to happen, but who knows? - ac_cv_c_bigendian=unknown - fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + if test $ac_cv_c_bigendian = unknown; then + # Compile a test program. + if test "$cross_compiling" = yes; then : + # Try to guess by grepping values from an object file. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +short int ascii_mm[] = + { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; + short int ascii_ii[] = + { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; + int use_ascii (int i) { + return ascii_mm[i] + ascii_ii[i]; + } + short int ebcdic_ii[] = + { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; + short int ebcdic_mm[] = + { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; + int use_ebcdic (int i) { + return ebcdic_mm[i] + ebcdic_ii[i]; + } + extern int foo; +int +main () +{ +return use_ascii (foo) == use_ebcdic (foo); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then + ac_cv_c_bigendian=yes + fi + if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi + fi fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ +$ac_includes_default int main () { - /* Are we little or big endian? From Harbison&Steele. */ - union - { - long l; - char c[sizeof (long)]; - } u; - u.l = 1; - exit (u.c[sizeof (long) - 1] == 1); + + /* Are we little or big endian? From Harbison&Steele. */ + union + { + long int l; + char c[sizeof (long int)]; + } u; + u.l = 1; + return u.c[sizeof (long int) - 1] == 1; + + ; + return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : ac_cv_c_bigendian=no else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_c_bigendian=yes -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + ac_cv_c_bigendian=yes fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + + fi fi -echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 -echo "${ECHO_T}$ac_cv_c_bigendian" >&6 -case $ac_cv_c_bigendian in - yes) +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5 +$as_echo "$ac_cv_c_bigendian" >&6; } + case $ac_cv_c_bigendian in #( + yes) + $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h +;; #( + no) + ;; #( + universal) -cat >>confdefs.h <<\_ACEOF -#define WORDS_BIGENDIAN 1 -_ACEOF - ;; - no) - ;; - *) - { { echo "$as_me:$LINENO: error: unknown endianness -presetting ac_cv_c_bigendian=no (or yes) will help" >&5 -echo "$as_me: error: unknown endianness -presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} - { (exit 1); exit 1; }; } ;; -esac +$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h + + ;; #( + *) + as_fn_error $? "unknown endianness + presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;; + esac #------------------------------------------------------------------------ @@ -7901,10 +7041,10 @@ if test "$TCL_EXEC_PREFIX" != "$exec_prefix"; then fi if test "$TCL_PREFIX" != "$prefix"; then - { echo "$as_me:$LINENO: WARNING: + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Different --prefix selected for Tk and Tcl! [package require Tk] may not work correctly in tclsh." >&5 -echo "$as_me: WARNING: +$as_echo "$as_me: WARNING: Different --prefix selected for Tk and Tcl! [package require Tk] may not work correctly in tclsh." >&2;} fi @@ -7919,17 +7059,13 @@ fi # special flag. #-------------------------------------------------------------------- -echo "$as_me:$LINENO: checking for fd_set in sys/types" >&5 -echo $ECHO_N "checking for fd_set in sys/types... $ECHO_C" >&6 -if test "${tcl_cv_type_fd_set+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fd_set in sys/types" >&5 +$as_echo_n "checking for fd_set in sys/types... " >&6; } +if ${tcl_cv_type_fd_set+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -7940,58 +7076,30 @@ fd_set readMask, writeMask; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_type_fd_set=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_type_fd_set=no + tcl_cv_type_fd_set=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $tcl_cv_type_fd_set" >&5 -echo "${ECHO_T}$tcl_cv_type_fd_set" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_type_fd_set" >&5 +$as_echo "$tcl_cv_type_fd_set" >&6; } tk_ok=$tcl_cv_type_fd_set if test $tk_ok = no; then - echo "$as_me:$LINENO: checking for fd_mask in sys/select" >&5 -echo $ECHO_N "checking for fd_mask in sys/select... $ECHO_C" >&6 -if test "${tcl_cv_grep_fd_mask+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fd_mask in sys/select" >&5 +$as_echo_n "checking for fd_mask in sys/select... " >&6; } +if ${tcl_cv_grep_fd_mask+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "fd_mask" >/dev/null 2>&1; then + $EGREP "fd_mask" >/dev/null 2>&1; then : tcl_cv_grep_fd_mask=present else tcl_cv_grep_fd_mask=missing @@ -7999,22 +7107,18 @@ fi rm -f conftest* fi -echo "$as_me:$LINENO: result: $tcl_cv_grep_fd_mask" >&5 -echo "${ECHO_T}$tcl_cv_grep_fd_mask" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_grep_fd_mask" >&5 +$as_echo "$tcl_cv_grep_fd_mask" >&6; } if test $tcl_cv_grep_fd_mask = present; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_SYS_SELECT_H 1 -_ACEOF +$as_echo "#define HAVE_SYS_SELECT_H 1" >>confdefs.h tk_ok=yes fi fi if test $tk_ok = no; then -cat >>confdefs.h <<\_ACEOF -#define NO_FD_SET 1 -_ACEOF +$as_echo "#define NO_FD_SET 1" >>confdefs.h fi @@ -8022,166 +7126,24 @@ fi # Find out all about time handling differences. #------------------------------------------------------------------------------ - for ac_header in sys/time.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> +do : + ac_fn_c_check_header_mongrel "$LINENO" "sys/time.h" "ac_cv_header_sys_time_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_time_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_TIME_H 1 _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -ac_header_compiler=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ----------------------------- ## -## Report this to the tk lists. ## -## ----------------------------- ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - -echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 -echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6 -if test "${ac_cv_header_time+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 +$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } +if ${ac_cv_header_time+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -8196,44 +7158,18 @@ return 0; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_time=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_time=no + ac_cv_header_time=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 -echo "${ECHO_T}$ac_cv_header_time" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 +$as_echo "$ac_cv_header_time" >&6; } if test $ac_cv_header_time = yes; then -cat >>confdefs.h <<\_ACEOF -#define TIME_WITH_SYS_TIME 1 -_ACEOF +$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h fi @@ -8246,117 +7182,24 @@ fi #-------------------------------------------------------------------- - echo "$as_me:$LINENO: checking for strtod" >&5 -echo $ECHO_N "checking for strtod... $ECHO_C" >&6 -if test "${ac_cv_func_strtod+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define strtod to an innocuous variant, in case declares strtod. - For example, HP-UX 11i declares gettimeofday. */ -#define strtod innocuous_strtod - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char strtod (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef strtod - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char strtod (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_strtod) || defined (__stub___strtod) -choke me -#else -char (*f) () = strtod; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != strtod; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_strtod=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_strtod=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_strtod" >&5 -echo "${ECHO_T}$ac_cv_func_strtod" >&6 -if test $ac_cv_func_strtod = yes; then + ac_fn_c_check_func "$LINENO" "strtod" "ac_cv_func_strtod" +if test "x$ac_cv_func_strtod" = xyes; then : tcl_strtod=1 else tcl_strtod=0 fi if test "$tcl_strtod" = 1; then - echo "$as_me:$LINENO: checking for Solaris2.4/Tru64 strtod bugs" >&5 -echo $ECHO_N "checking for Solaris2.4/Tru64 strtod bugs... $ECHO_C" >&6 -if test "${tcl_cv_strtod_buggy+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Solaris2.4/Tru64 strtod bugs" >&5 +$as_echo_n "checking for Solaris2.4/Tru64 strtod bugs... " >&6; } +if ${tcl_cv_strtod_buggy+:} false; then : + $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : tcl_cv_strtod_buggy=buggy else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ extern double strtod(); @@ -8379,45 +7222,28 @@ cat >>conftest.$ac_ext <<_ACEOF exit(0); } _ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : tcl_cv_strtod_buggy=ok else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -tcl_cv_strtod_buggy=buggy + tcl_cv_strtod_buggy=buggy fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi + fi -echo "$as_me:$LINENO: result: $tcl_cv_strtod_buggy" >&5 -echo "${ECHO_T}$tcl_cv_strtod_buggy" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_strtod_buggy" >&5 +$as_echo "$tcl_cv_strtod_buggy" >&6; } if test "$tcl_cv_strtod_buggy" = buggy; then - case $LIBOBJS in - "fixstrtod.$ac_objext" | \ - *" fixstrtod.$ac_objext" | \ - "fixstrtod.$ac_objext "* | \ + case " $LIBOBJS " in *" fixstrtod.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS fixstrtod.$ac_objext" ;; + *) LIBOBJS="$LIBOBJS fixstrtod.$ac_objext" + ;; esac USE_COMPAT=1 -cat >>confdefs.h <<\_ACEOF -#define strtod fixstrtod -_ACEOF +$as_echo "#define strtod fixstrtod" >>confdefs.h fi fi @@ -8428,64 +7254,9 @@ _ACEOF # they don't exist. #-------------------------------------------------------------------- -echo "$as_me:$LINENO: checking for mode_t" >&5 -echo $ECHO_N "checking for mode_t... $ECHO_C" >&6 -if test "${ac_cv_type_mode_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((mode_t *) 0) - return 0; -if (sizeof (mode_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_mode_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +ac_fn_c_check_type "$LINENO" "mode_t" "ac_cv_type_mode_t" "$ac_includes_default" +if test "x$ac_cv_type_mode_t" = xyes; then : -ac_cv_type_mode_t=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_mode_t" >&5 -echo "${ECHO_T}$ac_cv_type_mode_t" >&6 -if test $ac_cv_type_mode_t = yes; then - : else cat >>confdefs.h <<_ACEOF @@ -8494,64 +7265,9 @@ _ACEOF fi -echo "$as_me:$LINENO: checking for pid_t" >&5 -echo $ECHO_N "checking for pid_t... $ECHO_C" >&6 -if test "${ac_cv_type_pid_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((pid_t *) 0) - return 0; -if (sizeof (pid_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_pid_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default" +if test "x$ac_cv_type_pid_t" = xyes; then : -ac_cv_type_pid_t=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 -echo "${ECHO_T}$ac_cv_type_pid_t" >&6 -if test $ac_cv_type_pid_t = yes; then - : else cat >>confdefs.h <<_ACEOF @@ -8560,88 +7276,29 @@ _ACEOF fi -echo "$as_me:$LINENO: checking for size_t" >&5 -echo $ECHO_N "checking for size_t... $ECHO_C" >&6 -if test "${ac_cv_type_size_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((size_t *) 0) - return 0; -if (sizeof (size_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_size_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" +if test "x$ac_cv_type_size_t" = xyes; then : -ac_cv_type_size_t=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 -echo "${ECHO_T}$ac_cv_type_size_t" >&6 -if test $ac_cv_type_size_t = yes; then - : else cat >>confdefs.h <<_ACEOF -#define size_t unsigned +#define size_t unsigned int _ACEOF fi -echo "$as_me:$LINENO: checking for uid_t in sys/types.h" >&5 -echo $ECHO_N "checking for uid_t in sys/types.h... $ECHO_C" >&6 -if test "${ac_cv_type_uid_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5 +$as_echo_n "checking for uid_t in sys/types.h... " >&6; } +if ${ac_cv_type_uid_t+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "uid_t" >/dev/null 2>&1; then + $EGREP "uid_t" >/dev/null 2>&1; then : ac_cv_type_uid_t=yes else ac_cv_type_uid_t=no @@ -8649,147 +7306,59 @@ fi rm -f conftest* fi -echo "$as_me:$LINENO: result: $ac_cv_type_uid_t" >&5 -echo "${ECHO_T}$ac_cv_type_uid_t" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5 +$as_echo "$ac_cv_type_uid_t" >&6; } if test $ac_cv_type_uid_t = no; then -cat >>confdefs.h <<\_ACEOF -#define uid_t int -_ACEOF +$as_echo "#define uid_t int" >>confdefs.h -cat >>confdefs.h <<\_ACEOF -#define gid_t int -_ACEOF +$as_echo "#define gid_t int" >>confdefs.h fi -echo "$as_me:$LINENO: checking for intptr_t" >&5 -echo $ECHO_N "checking for intptr_t... $ECHO_C" >&6 -if test "${ac_cv_type_intptr_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((intptr_t *) 0) - return 0; -if (sizeof (intptr_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_intptr_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_type_intptr_t=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_intptr_t" >&5 -echo "${ECHO_T}$ac_cv_type_intptr_t" >&6 -if test $ac_cv_type_intptr_t = yes; then +ac_fn_c_check_type "$LINENO" "intptr_t" "ac_cv_type_intptr_t" "$ac_includes_default" +if test "x$ac_cv_type_intptr_t" = xyes; then : -cat >>confdefs.h <<\_ACEOF -#define HAVE_INTPTR_T 1 -_ACEOF +$as_echo "#define HAVE_INTPTR_T 1" >>confdefs.h else - echo "$as_me:$LINENO: checking for pointer-size signed integer type" >&5 -echo $ECHO_N "checking for pointer-size signed integer type... $ECHO_C" >&6 -if test "${tcl_cv_intptr_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pointer-size signed integer type" >&5 +$as_echo_n "checking for pointer-size signed integer type... " >&6; } +if ${tcl_cv_intptr_t+:} false; then : + $as_echo_n "(cached) " >&6 else for tcl_cv_intptr_t in "int" "long" "long long" none; do if test "$tcl_cv_intptr_t" != none; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($tcl_cv_intptr_t))]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_ok=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_ok=no + tcl_ok=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test "$tcl_ok" = yes && break; fi done fi -echo "$as_me:$LINENO: result: $tcl_cv_intptr_t" >&5 -echo "${ECHO_T}$tcl_cv_intptr_t" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_intptr_t" >&5 +$as_echo "$tcl_cv_intptr_t" >&6; } if test "$tcl_cv_intptr_t" != none; then cat >>confdefs.h <<_ACEOF @@ -8800,132 +7369,48 @@ _ACEOF fi -echo "$as_me:$LINENO: checking for uintptr_t" >&5 -echo $ECHO_N "checking for uintptr_t... $ECHO_C" >&6 -if test "${ac_cv_type_uintptr_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((uintptr_t *) 0) - return 0; -if (sizeof (uintptr_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_uintptr_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_type_uintptr_t=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_uintptr_t" >&5 -echo "${ECHO_T}$ac_cv_type_uintptr_t" >&6 -if test $ac_cv_type_uintptr_t = yes; then +ac_fn_c_check_type "$LINENO" "uintptr_t" "ac_cv_type_uintptr_t" "$ac_includes_default" +if test "x$ac_cv_type_uintptr_t" = xyes; then : -cat >>confdefs.h <<\_ACEOF -#define HAVE_UINTPTR_T 1 -_ACEOF +$as_echo "#define HAVE_UINTPTR_T 1" >>confdefs.h else - echo "$as_me:$LINENO: checking for pointer-size unsigned integer type" >&5 -echo $ECHO_N "checking for pointer-size unsigned integer type... $ECHO_C" >&6 -if test "${tcl_cv_uintptr_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pointer-size unsigned integer type" >&5 +$as_echo_n "checking for pointer-size unsigned integer type... " >&6; } +if ${tcl_cv_uintptr_t+:} false; then : + $as_echo_n "(cached) " >&6 else for tcl_cv_uintptr_t in "unsigned int" "unsigned long" "unsigned long long" \ none; do if test "$tcl_cv_uintptr_t" != none; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($tcl_cv_uintptr_t))]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_ok=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_ok=no + tcl_ok=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext test "$tcl_ok" = yes && break; fi done fi -echo "$as_me:$LINENO: result: $tcl_cv_uintptr_t" >&5 -echo "${ECHO_T}$tcl_cv_uintptr_t" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_uintptr_t" >&5 +$as_echo "$tcl_cv_uintptr_t" >&6; } if test "$tcl_cv_uintptr_t" != none; then cat >>confdefs.h <<_ACEOF @@ -8941,17 +7426,13 @@ fi # In OS/390 struct pwd has no pw_gecos field #------------------------------------------- -echo "$as_me:$LINENO: checking pw_gecos in struct pwd" >&5 -echo $ECHO_N "checking pw_gecos in struct pwd... $ECHO_C" >&6 -if test "${tcl_cv_pwd_pw_gecos+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking pw_gecos in struct pwd" >&5 +$as_echo_n "checking pw_gecos in struct pwd... " >&6; } +if ${tcl_cv_pwd_pw_gecos+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -8962,44 +7443,18 @@ struct passwd pwd; pwd.pw_gecos; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_pwd_pw_gecos=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_pwd_pw_gecos=no + tcl_cv_pwd_pw_gecos=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $tcl_cv_pwd_pw_gecos" >&5 -echo "${ECHO_T}$tcl_cv_pwd_pw_gecos" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_pwd_pw_gecos" >&5 +$as_echo "$tcl_cv_pwd_pw_gecos" >&6; } if test $tcl_cv_pwd_pw_gecos = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_PW_GECOS 1 -_ACEOF +$as_echo "#define HAVE_PW_GECOS 1" >>confdefs.h fi @@ -9008,41 +7463,41 @@ fi #-------------------------------------------------------------------- if test "`uname -s`" = "Darwin" ; then - echo "$as_me:$LINENO: checking whether to use Aqua" >&5 -echo $ECHO_N "checking whether to use Aqua... $ECHO_C" >&6 - # Check whether --enable-aqua or --disable-aqua was given. -if test "${enable_aqua+set}" = set; then - enableval="$enable_aqua" - tk_aqua=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use Aqua" >&5 +$as_echo_n "checking whether to use Aqua... " >&6; } + # Check whether --enable-aqua was given. +if test "${enable_aqua+set}" = set; then : + enableval=$enable_aqua; tk_aqua=$enableval else tk_aqua=no -fi; +fi + if test $tk_aqua = yes -o $tk_aqua = cocoa; then tk_aqua=yes if test $tcl_corefoundation = no; then - { echo "$as_me:$LINENO: WARNING: Aqua can only be used when CoreFoundation is available" >&5 -echo "$as_me: WARNING: Aqua can only be used when CoreFoundation is available" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Aqua can only be used when CoreFoundation is available" >&5 +$as_echo "$as_me: WARNING: Aqua can only be used when CoreFoundation is available" >&2;} tk_aqua=no fi if test ! -d /System/Library/Frameworks/Cocoa.framework; then - { echo "$as_me:$LINENO: WARNING: Aqua can only be used when Cocoa is available" >&5 -echo "$as_me: WARNING: Aqua can only be used when Cocoa is available" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Aqua can only be used when Cocoa is available" >&5 +$as_echo "$as_me: WARNING: Aqua can only be used when Cocoa is available" >&2;} tk_aqua=no fi if test "`uname -r | awk -F. '{print $1}'`" -lt 9; then - { echo "$as_me:$LINENO: WARNING: Aqua requires Mac OS X 10.5 or later" >&5 -echo "$as_me: WARNING: Aqua requires Mac OS X 10.5 or later" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Aqua requires Mac OS X 10.5 or later" >&5 +$as_echo "$as_me: WARNING: Aqua requires Mac OS X 10.5 or later" >&2;} tk_aqua=no fi fi - echo "$as_me:$LINENO: result: $tk_aqua" >&5 -echo "${ECHO_T}$tk_aqua" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tk_aqua" >&5 +$as_echo "$tk_aqua" >&6; } if test "$fat_32_64" = yes; then if test $tk_aqua = no; then - echo "$as_me:$LINENO: checking for 64-bit X11" >&5 -echo $ECHO_N "checking for 64-bit X11... $ECHO_C" >&6 -if test "${tcl_cv_lib_x11_64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit X11" >&5 +$as_echo_n "checking for 64-bit X11... " >&6; } +if ${tcl_cv_lib_x11_64+:} false; then : + $as_echo_n "(cached) " >&6 else for v in CFLAGS CPPFLAGS LDFLAGS; do @@ -9050,11 +7505,7 @@ else done CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -9065,49 +7516,25 @@ XrmInitialize(); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_lib_x11_64=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_lib_x11_64=no + tcl_cv_lib_x11_64=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext for v in CFLAGS CPPFLAGS LDFLAGS; do eval $v'="$hold_'$v'"' done fi -echo "$as_me:$LINENO: result: $tcl_cv_lib_x11_64" >&5 -echo "${ECHO_T}$tcl_cv_lib_x11_64" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_lib_x11_64" >&5 +$as_echo "$tcl_cv_lib_x11_64" >&6; } fi # remove 64-bit arch flags from CFLAGS et al. for combined 32 & 64 bit # fat builds if configuration does not support 64-bit. if test "$tcl_cv_lib_x11_64" = no; then - { echo "$as_me:$LINENO: Removing 64-bit architectures from compiler & linker flags" >&5 -echo "$as_me: Removing 64-bit architectures from compiler & linker flags" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: Removing 64-bit architectures from compiler & linker flags" >&5 +$as_echo "$as_me: Removing 64-bit architectures from compiler & linker flags" >&6;} for v in CFLAGS CPPFLAGS LDFLAGS; do eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' done @@ -9115,19 +7542,15 @@ echo "$as_me: Removing 64-bit architectures from compiler & linker flags" >&6;} fi if test $tk_aqua = no; then # check if weak linking whole libraries is possible. - echo "$as_me:$LINENO: checking if ld accepts -weak-l flag" >&5 -echo $ECHO_N "checking if ld accepts -weak-l flag... $ECHO_C" >&6 -if test "${tcl_cv_ld_weak_l+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if ld accepts -weak-l flag" >&5 +$as_echo_n "checking if ld accepts -weak-l flag... " >&6; } +if ${tcl_cv_ld_weak_l+:} false; then : + $as_echo_n "(cached) " >&6 else hold_ldflags=$LDFLAGS LDFLAGS="$LDFLAGS -Wl,-weak-lm" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -9138,186 +7561,24 @@ double f = sin(1.0); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_ld_weak_l=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_ld_weak_l=no + tcl_cv_ld_weak_l=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LDFLAGS=$hold_ldflags fi -echo "$as_me:$LINENO: result: $tcl_cv_ld_weak_l" >&5 -echo "${ECHO_T}$tcl_cv_ld_weak_l" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_ld_weak_l" >&5 +$as_echo "$tcl_cv_ld_weak_l" >&6; } fi - -for ac_header in AvailabilityMacros.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ----------------------------- ## -## Report this to the tk lists. ## -## ----------------------------- ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 + for ac_header in AvailabilityMacros.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "AvailabilityMacros.h" "ac_cv_header_AvailabilityMacros_h" "$ac_includes_default" +if test "x$ac_cv_header_AvailabilityMacros_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_AVAILABILITYMACROS_H 1 _ACEOF fi @@ -9325,18 +7586,14 @@ fi done if test "$ac_cv_header_AvailabilityMacros_h" = yes; then - echo "$as_me:$LINENO: checking if weak import is available" >&5 -echo $ECHO_N "checking if weak import is available... $ECHO_C" >&6 -if test "${tcl_cv_cc_weak_import+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if weak import is available" >&5 +$as_echo_n "checking if weak import is available... " >&6; } +if ${tcl_cv_cc_weak_import+:} false; then : + $as_echo_n "(cached) " >&6 else hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ @@ -9356,60 +7613,30 @@ rand(); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_cc_weak_import=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cc_weak_import=no + tcl_cv_cc_weak_import=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext CFLAGS=$hold_cflags fi -echo "$as_me:$LINENO: result: $tcl_cv_cc_weak_import" >&5 -echo "${ECHO_T}$tcl_cv_cc_weak_import" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cc_weak_import" >&5 +$as_echo "$tcl_cv_cc_weak_import" >&6; } if test $tcl_cv_cc_weak_import = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_WEAK_IMPORT 1 -_ACEOF +$as_echo "#define HAVE_WEAK_IMPORT 1" >>confdefs.h fi - echo "$as_me:$LINENO: checking if Darwin SUSv3 extensions are available" >&5 -echo $ECHO_N "checking if Darwin SUSv3 extensions are available... $ECHO_C" >&6 -if test "${tcl_cv_cc_darwin_c_source+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Darwin SUSv3 extensions are available" >&5 +$as_echo_n "checking if Darwin SUSv3 extensions are available... " >&6; } +if ${tcl_cv_cc_darwin_c_source+:} false; then : + $as_echo_n "(cached) " >&6 else hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ @@ -9430,45 +7657,19 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_cc_darwin_c_source=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cc_darwin_c_source=no + tcl_cv_cc_darwin_c_source=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext CFLAGS=$hold_cflags fi -echo "$as_me:$LINENO: result: $tcl_cv_cc_darwin_c_source" >&5 -echo "${ECHO_T}$tcl_cv_cc_darwin_c_source" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cc_darwin_c_source" >&5 +$as_echo "$tcl_cv_cc_darwin_c_source" >&6; } if test $tcl_cv_cc_darwin_c_source = yes; then -cat >>confdefs.h <<\_ACEOF -#define _DARWIN_C_SOURCE 1 -_ACEOF +$as_echo "#define _DARWIN_C_SOURCE 1" >>confdefs.h fi fi @@ -9478,18 +7679,14 @@ fi if test $tk_aqua = yes; then -cat >>confdefs.h <<\_ACEOF -#define MAC_OSX_TK 1 -_ACEOF +$as_echo "#define MAC_OSX_TK 1" >>confdefs.h LIBS="$LIBS -framework Cocoa -framework Carbon -framework IOKit" EXTRA_CC_SWITCHES='-std=gnu99 -x objective-c' TK_WINDOWINGSYSTEM=AQUA if test -n "${enable_symbols}" -a "${enable_symbols}" != no; then -cat >>confdefs.h <<\_ACEOF -#define TK_MAC_DEBUG 1 -_ACEOF +$as_echo "#define TK_MAC_DEBUG 1" >>confdefs.h fi else @@ -9503,44 +7700,47 @@ else #-------------------------------------------------------------------- - echo "$as_me:$LINENO: checking for X" >&5 -echo $ECHO_N "checking for X... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5 +$as_echo_n "checking for X... " >&6; } -# Check whether --with-x or --without-x was given. -if test "${with_x+set}" = set; then - withval="$with_x" +# Check whether --with-x was given. +if test "${with_x+set}" = set; then : + withval=$with_x; +fi -fi; # $have_x is `yes', `no', `disabled', or empty when we do not yet know. if test "x$with_x" = xno; then # The user explicitly disabled X. have_x=disabled else - if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then - # Both variables are already set. - have_x=yes - else - if test "${ac_cv_have_x+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + case $x_includes,$x_libraries in #( + *\'*) as_fn_error $? "cannot use X directory names containing '" "$LINENO" 5;; #( + *,NONE | NONE,*) if ${ac_cv_have_x+:} false; then : + $as_echo_n "(cached) " >&6 else # One or both of the vars are not set, and there is no cached value. ac_x_includes=no ac_x_libraries=no -rm -fr conftest.dir +rm -f -r conftest.dir if mkdir conftest.dir; then cd conftest.dir - # Make sure to not put "make" in the Imakefile rules, since we grep it out. cat >Imakefile <<'_ACEOF' -acfindx: - @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' -_ACEOF - if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then - # GNU make sometimes prints "make[1]: Entering...", which would confuse us. - eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` +incroot: + @echo incroot='${INCROOT}' +usrlibdir: + @echo usrlibdir='${USRLIBDIR}' +libdir: + @echo libdir='${LIBDIR}' +_ACEOF + if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then + # GNU make sometimes prints "make[1]: Entering ...", which would confuse us. + for ac_var in incroot usrlibdir libdir; do + eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" + done # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. - for ac_extension in a so sl; do - if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && - test -f $ac_im_libdir/libX11.$ac_extension; then + for ac_extension in a so sl dylib la dll; do + if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && + test -f "$ac_im_libdir/libX11.$ac_extension"; then ac_im_usrlibdir=$ac_im_libdir; break fi done @@ -9548,37 +7748,41 @@ _ACEOF # bogus both because they are the default anyway, and because # using them would break gcc on systems where it needs fixed includes. case $ac_im_incroot in - /usr/include) ;; + /usr/include) ac_x_includes= ;; *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; esac case $ac_im_usrlibdir in - /usr/lib | /lib) ;; + /usr/lib | /usr/lib64 | /lib | /lib64) ;; *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; esac fi cd .. - rm -fr conftest.dir + rm -f -r conftest.dir fi # Standard set of common directories for X headers. # Check X11 before X11Rn because it is often a symlink to the current release. ac_x_header_dirs=' /usr/X11/include +/usr/X11R7/include /usr/X11R6/include /usr/X11R5/include /usr/X11R4/include /usr/include/X11 +/usr/include/X11R7 /usr/include/X11R6 /usr/include/X11R5 /usr/include/X11R4 /usr/local/X11/include +/usr/local/X11R7/include /usr/local/X11R6/include /usr/local/X11R5/include /usr/local/X11R4/include /usr/local/include/X11 +/usr/local/include/X11R7 /usr/local/include/X11R6 /usr/local/include/X11R5 /usr/local/include/X11R4 @@ -9600,38 +7804,14 @@ ac_x_header_dirs=' if test "$ac_x_includes" = no; then # Guess where to find include files, by looking for Xlib.h. # First, try using that file with no special directory specified. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then +if ac_fn_c_try_cpp "$LINENO"; then : # We can compile using X headers with no special include directory. ac_x_includes= else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - for ac_dir in $ac_x_header_dirs; do if test -r "$ac_dir/X11/Xlib.h"; then ac_x_includes=$ac_dir @@ -9639,7 +7819,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 fi done fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext fi # $ac_x_includes = no if test "$ac_x_libraries" = no; then @@ -9648,11 +7828,7 @@ if test "$ac_x_libraries" = no; then # Don't add to $LIBS permanently. ac_save_LIBS=$LIBS LIBS="-lX11 $LIBS" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -9663,117 +7839,73 @@ XrmInitialize () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : LIBS=$ac_save_LIBS # We can link X programs with no special library path. ac_x_libraries= else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -LIBS=$ac_save_LIBS -for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` + LIBS=$ac_save_LIBS +for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` do # Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do - if test -r $ac_dir/libXt.$ac_extension; then + for ac_extension in a so sl dylib la dll; do + if test -r "$ac_dir/libX11.$ac_extension"; then ac_x_libraries=$ac_dir break 2 fi done done fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi # $ac_x_libraries = no -if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then - # Didn't find X anywhere. Cache the known absence of X. - ac_cv_have_x="have_x=no" -else - # Record where we found X for the cache. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" -fi +case $ac_x_includes,$ac_x_libraries in #( + no,* | *,no | *\'*) + # Didn't find X, or a directory has "'" in its name. + ac_cv_have_x="have_x=no";; #( + *) + # Record where we found X for the cache. + ac_cv_have_x="have_x=yes\ + ac_x_includes='$ac_x_includes'\ + ac_x_libraries='$ac_x_libraries'" +esac fi - - fi +;; #( + *) have_x=yes;; + esac eval "$ac_cv_have_x" fi # $with_x != no if test "$have_x" != yes; then - echo "$as_me:$LINENO: result: $have_x" >&5 -echo "${ECHO_T}$have_x" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_x" >&5 +$as_echo "$have_x" >&6; } no_x=yes else # If each of the values was on the command line, it overrides each guess. test "x$x_includes" = xNONE && x_includes=$ac_x_includes test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries # Update the cache value to reflect the command line values. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$x_includes ac_x_libraries=$x_libraries" - echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 -echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6 + ac_cv_have_x="have_x=yes\ + ac_x_includes='$x_includes'\ + ac_x_libraries='$x_libraries'" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: libraries $x_libraries, headers $x_includes" >&5 +$as_echo "libraries $x_libraries, headers $x_includes" >&6; } fi not_really_there="" if test "$no_x" = ""; then if test "$x_includes" = ""; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_cpp "$LINENO"; then : +else not_really_there="yes" fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext else if test ! -r $x_includes/X11/Xlib.h; then not_really_there="yes" @@ -9781,49 +7913,25 @@ rm -f conftest.err conftest.$ac_ext fi fi if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then - echo "$as_me:$LINENO: checking for X11 header files" >&5 -echo $ECHO_N "checking for X11 header files... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for X11 header files" >&5 +$as_echo_n "checking for X11 header files... " >&6; } found_xincludes="no" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then +if ac_fn_c_try_cpp "$LINENO"; then : found_xincludes="yes" else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - found_xincludes="no" fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext if test "$found_xincludes" = "no"; then dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" for i in $dirs ; do if test -r $i/X11/Xlib.h; then - echo "$as_me:$LINENO: result: $i" >&5 -echo "${ECHO_T}$i" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $i" >&5 +$as_echo "$i" >&6; } XINCLUDES=" -I$i" found_xincludes="yes" break @@ -9837,19 +7945,19 @@ echo "${ECHO_T}$i" >&6 fi fi if test "$found_xincludes" = "no"; then - echo "$as_me:$LINENO: result: couldn't find any!" >&5 -echo "${ECHO_T}couldn't find any!" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: couldn't find any!" >&5 +$as_echo "couldn't find any!" >&6; } fi if test "$no_x" = yes; then - echo "$as_me:$LINENO: checking for X11 libraries" >&5 -echo $ECHO_N "checking for X11 libraries... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for X11 libraries" >&5 +$as_echo_n "checking for X11 libraries... " >&6; } XLIBSW=nope dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" for i in $dirs ; do if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then - echo "$as_me:$LINENO: result: $i" >&5 -echo "${ECHO_T}$i" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $i" >&5 +$as_echo "$i" >&6; } XLIBSW="-L$i -lX11" x_libraries="$i" break @@ -9863,78 +7971,50 @@ echo "${ECHO_T}$i" >&6 fi fi if test "$XLIBSW" = nope ; then - echo "$as_me:$LINENO: checking for XCreateWindow in -lXwindow" >&5 -echo $ECHO_N "checking for XCreateWindow in -lXwindow... $ECHO_C" >&6 -if test "${ac_cv_lib_Xwindow_XCreateWindow+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XCreateWindow in -lXwindow" >&5 +$as_echo_n "checking for XCreateWindow in -lXwindow... " >&6; } +if ${ac_cv_lib_Xwindow_XCreateWindow+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lXwindow $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char XCreateWindow (); int main () { -XCreateWindow (); +return XCreateWindow (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_Xwindow_XCreateWindow=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_Xwindow_XCreateWindow=no + ac_cv_lib_Xwindow_XCreateWindow=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_Xwindow_XCreateWindow" >&5 -echo "${ECHO_T}$ac_cv_lib_Xwindow_XCreateWindow" >&6 -if test $ac_cv_lib_Xwindow_XCreateWindow = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xwindow_XCreateWindow" >&5 +$as_echo "$ac_cv_lib_Xwindow_XCreateWindow" >&6; } +if test "x$ac_cv_lib_Xwindow_XCreateWindow" = xyes; then : XLIBSW=-lXwindow fi fi if test "$XLIBSW" = nope ; then - echo "$as_me:$LINENO: result: could not find any! Using -lX11." >&5 -echo "${ECHO_T}could not find any! Using -lX11." >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not find any! Using -lX11." >&5 +$as_echo "could not find any! Using -lX11." >&6; } XLIBSW=-lX11 fi @@ -9983,65 +8063,37 @@ fi #-------------------------------------------------------------------- if test $tk_aqua = no; then - echo "$as_me:$LINENO: checking for main in -lXbsd" >&5 -echo $ECHO_N "checking for main in -lXbsd... $ECHO_C" >&6 -if test "${ac_cv_lib_Xbsd_main+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lXbsd" >&5 +$as_echo_n "checking for main in -lXbsd... " >&6; } +if ${ac_cv_lib_Xbsd_main+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lXbsd $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { -main (); +return main (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_Xbsd_main=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_Xbsd_main=no + ac_cv_lib_Xbsd_main=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_Xbsd_main" >&5 -echo "${ECHO_T}$ac_cv_lib_Xbsd_main" >&6 -if test $ac_cv_lib_Xbsd_main = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xbsd_main" >&5 +$as_echo "$ac_cv_lib_Xbsd_main" >&6; } +if test "x$ac_cv_lib_Xbsd_main" = xyes; then : LIBS="$LIBS -lXbsd" fi @@ -10059,17 +8111,13 @@ fi #-------------------------------------------------------------------- if test -d /usr/include/mit -a $tk_aqua = no; then - echo "$as_me:$LINENO: checking MIT X libraries" >&5 -echo $ECHO_N "checking MIT X libraries... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking MIT X libraries" >&5 +$as_echo_n "checking MIT X libraries... " >&6; } tk_oldCFlags=$CFLAGS CFLAGS="$CFLAGS -I/usr/include/mit" tk_oldLibs=$LIBS LIBS="$LIBS -lX11-mit" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include @@ -10084,43 +8132,19 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } XLIBSW="-lX11-mit" XINCLUDES="-I/usr/include/mit" else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext CFLAGS=$tk_oldCFlags LIBS=$tk_oldLibs fi @@ -10130,20 +8154,20 @@ fi #-------------------------------------------------------------------- if test $tk_aqua = no; then - echo "$as_me:$LINENO: checking whether to use xft" >&5 -echo $ECHO_N "checking whether to use xft... $ECHO_C" >&6 - # Check whether --enable-xft or --disable-xft was given. -if test "${enable_xft+set}" = set; then - enableval="$enable_xft" - enable_xft=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use xft" >&5 +$as_echo_n "checking whether to use xft... " >&6; } + # Check whether --enable-xft was given. +if test "${enable_xft+set}" = set; then : + enableval=$enable_xft; enable_xft=$enableval else enable_xft="default" -fi; +fi + XFT_CFLAGS="" XFT_LIBS="" if test "$enable_xft" = "no" ; then - echo "$as_me:$LINENO: result: $enable_xft" >&5 -echo "${ECHO_T}$enable_xft" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_xft" >&5 +$as_echo "$enable_xft" >&6; } else found_xft="yes" XFT_CFLAGS=`xft-config --cflags 2>/dev/null` || found_xft="no" @@ -10153,63 +8177,17 @@ echo "${ECHO_T}$enable_xft" >&6 XFT_CFLAGS=`pkg-config --cflags xft 2>/dev/null` || found_xft="no" XFT_LIBS=`pkg-config --libs xft 2>/dev/null` || found_xft="no" fi - echo "$as_me:$LINENO: result: $found_xft" >&5 -echo "${ECHO_T}$found_xft" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_xft" >&5 +$as_echo "$found_xft" >&6; } if test "$found_xft" = "yes" ; then tk_oldCFlags=$CFLAGS CFLAGS="$CFLAGS $XINCLUDES $XFT_CFLAGS" tk_oldLibs=$LIBS LIBS="$tk_oldLIBS $XFT_LIBS $XLIBSW" - echo "$as_me:$LINENO: checking for X11/Xft/Xft.h" >&5 -echo $ECHO_N "checking for X11/Xft/Xft.h... $ECHO_C" >&6 -if test "${ac_cv_header_X11_Xft_Xft_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_X11_Xft_Xft_h=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ac_fn_c_check_header_compile "$LINENO" "X11/Xft/Xft.h" "ac_cv_header_X11_Xft_Xft_h" "#include +" +if test "x$ac_cv_header_X11_Xft_Xft_h" = xyes; then : -ac_cv_header_X11_Xft_Xft_h=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_header_X11_Xft_Xft_h" >&5 -echo "${ECHO_T}$ac_cv_header_X11_Xft_Xft_h" >&6 -if test $ac_cv_header_X11_Xft_Xft_h = yes; then - : else found_xft=no @@ -10225,72 +8203,43 @@ fi CFLAGS="$CFLAGS $XINCLUDES $XFT_CFLAGS" tk_oldLibs=$LIBS LIBS="$tk_oldLIBS $XFT_LIBS $XLIBSW" - -echo "$as_me:$LINENO: checking for XftFontOpen in -lXft" >&5 -echo $ECHO_N "checking for XftFontOpen in -lXft... $ECHO_C" >&6 -if test "${ac_cv_lib_Xft_XftFontOpen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XftFontOpen in -lXft" >&5 +$as_echo_n "checking for XftFontOpen in -lXft... " >&6; } +if ${ac_cv_lib_Xft_XftFontOpen+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lXft $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char XftFontOpen (); int main () { -XftFontOpen (); +return XftFontOpen (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_Xft_XftFontOpen=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_Xft_XftFontOpen=no + ac_cv_lib_Xft_XftFontOpen=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_Xft_XftFontOpen" >&5 -echo "${ECHO_T}$ac_cv_lib_Xft_XftFontOpen" >&6 -if test $ac_cv_lib_Xft_XftFontOpen = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xft_XftFontOpen" >&5 +$as_echo "$ac_cv_lib_Xft_XftFontOpen" >&6; } +if test "x$ac_cv_lib_Xft_XftFontOpen" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_LIBXFT 1 _ACEOF @@ -10311,71 +8260,43 @@ fi CFLAGS="$CFLAGS $XINCLUDES $XFT_CFLAGS" tk_oldLibs=$LIBS LIBS="$tk_oldLIBS $XFT_LIBS $XLIBSW -lfontconfig" - echo "$as_me:$LINENO: checking for FcFontSort in -lfontconfig" >&5 -echo $ECHO_N "checking for FcFontSort in -lfontconfig... $ECHO_C" >&6 -if test "${ac_cv_lib_fontconfig_FcFontSort+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for FcFontSort in -lfontconfig" >&5 +$as_echo_n "checking for FcFontSort in -lfontconfig... " >&6; } +if ${ac_cv_lib_fontconfig_FcFontSort+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lfontconfig $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char FcFontSort (); int main () { -FcFontSort (); +return FcFontSort (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_fontconfig_FcFontSort=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_fontconfig_FcFontSort=no + ac_cv_lib_fontconfig_FcFontSort=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_fontconfig_FcFontSort" >&5 -echo "${ECHO_T}$ac_cv_lib_fontconfig_FcFontSort" >&6 -if test $ac_cv_lib_fontconfig_FcFontSort = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_fontconfig_FcFontSort" >&5 +$as_echo "$ac_cv_lib_fontconfig_FcFontSort" >&6; } +if test "x$ac_cv_lib_fontconfig_FcFontSort" = xyes; then : XFT_LIBS="$XFT_LIBS -lfontconfig" @@ -10386,8 +8307,8 @@ fi fi if test "$found_xft" = "no" ; then if test "$enable_xft" = "yes" ; then - { echo "$as_me:$LINENO: WARNING: Can't find xft configuration, or xft is unusable" >&5 -echo "$as_me: WARNING: Can't find xft configuration, or xft is unusable" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Can't find xft configuration, or xft is unusable" >&5 +$as_echo "$as_me: WARNING: Can't find xft configuration, or xft is unusable" >&2;} fi enable_xft=no XFT_CFLAGS="" @@ -10399,9 +8320,7 @@ echo "$as_me: WARNING: Can't find xft configuration, or xft is unusable" >&2;} if test $enable_xft = "yes" ; then UNIX_FONT_OBJS=tkUnixRFont.o -cat >>confdefs.h <<\_ACEOF -#define HAVE_XFT 1 -_ACEOF +$as_echo "#define HAVE_XFT 1" >>confdefs.h else UNIX_FONT_OBJS=tkUnixFont.o @@ -10420,55 +8339,9 @@ if test $tk_aqua = no; then tk_oldLibs=$LIBS CFLAGS="$CFLAGS $XINCLUDES" LIBS="$LIBS $XLIBSW" - echo "$as_me:$LINENO: checking for X11/XKBlib.h" >&5 -echo $ECHO_N "checking for X11/XKBlib.h... $ECHO_C" >&6 -if test "${ac_cv_header_X11_XKBlib_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_X11_XKBlib_h=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_X11_XKBlib_h=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_header_X11_XKBlib_h" >&5 -echo "${ECHO_T}$ac_cv_header_X11_XKBlib_h" >&6 -if test $ac_cv_header_X11_XKBlib_h = yes; then + ac_fn_c_check_header_compile "$LINENO" "X11/XKBlib.h" "ac_cv_header_X11_XKBlib_h" "#include +" +if test "x$ac_cv_header_X11_XKBlib_h" = xyes; then : xkblib_header_found=yes @@ -10480,71 +8353,43 @@ fi if test $xkblib_header_found = "yes" ; then - echo "$as_me:$LINENO: checking for XkbKeycodeToKeysym in -lX11" >&5 -echo $ECHO_N "checking for XkbKeycodeToKeysym in -lX11... $ECHO_C" >&6 -if test "${ac_cv_lib_X11_XkbKeycodeToKeysym+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XkbKeycodeToKeysym in -lX11" >&5 +$as_echo_n "checking for XkbKeycodeToKeysym in -lX11... " >&6; } +if ${ac_cv_lib_X11_XkbKeycodeToKeysym+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lX11 $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char XkbKeycodeToKeysym (); int main () { -XkbKeycodeToKeysym (); +return XkbKeycodeToKeysym (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_X11_XkbKeycodeToKeysym=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_X11_XkbKeycodeToKeysym=no + ac_cv_lib_X11_XkbKeycodeToKeysym=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_X11_XkbKeycodeToKeysym" >&5 -echo "${ECHO_T}$ac_cv_lib_X11_XkbKeycodeToKeysym" >&6 -if test $ac_cv_lib_X11_XkbKeycodeToKeysym = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_X11_XkbKeycodeToKeysym" >&5 +$as_echo "$ac_cv_lib_X11_XkbKeycodeToKeysym" >&6; } +if test "x$ac_cv_lib_X11_XkbKeycodeToKeysym" = xyes; then : xkbkeycodetokeysym_found=yes @@ -10559,9 +8404,7 @@ fi fi if test $xkbkeycodetokeysym_found = "yes" ; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_XKBKEYCODETOKEYSYM 1 -_ACEOF +$as_echo "#define HAVE_XKBKEYCODETOKEYSYM 1" >>confdefs.h fi CFLAGS=$tk_oldCFlags @@ -10573,15 +8416,11 @@ fi #-------------------------------------------------------------------- if test $tk_aqua = no && test "$GCC" = yes; then - echo "$as_me:$LINENO: checking whether XKeycodeToKeysym is deprecated" >&5 -echo $ECHO_N "checking whether XKeycodeToKeysym is deprecated... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether XKeycodeToKeysym is deprecated" >&5 +$as_echo_n "checking whether XKeycodeToKeysym is deprecated... " >&6; } tk_oldCFlags=$CFLAGS CFLAGS="$CFLAGS -Werror" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include @@ -10596,48 +8435,22 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } -cat >>confdefs.h <<\_ACEOF -#define XKEYCODETOKEYSYM_IS_DEPRECATED 1 -_ACEOF +$as_echo "#define XKEYCODETOKEYSYM_IS_DEPRECATED 1" >>confdefs.h fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext CFLAGS=$tk_oldCFlags fi @@ -10657,306 +8470,115 @@ if test $tk_aqua = no; then LIBS="$tk_oldLibs $XLIBSW" xss_header_found=no xss_lib_found=no - echo "$as_me:$LINENO: checking whether to try to use XScreenSaver" >&5 -echo $ECHO_N "checking whether to try to use XScreenSaver... $ECHO_C" >&6 - # Check whether --enable-xss or --disable-xss was given. -if test "${enable_xss+set}" = set; then - enableval="$enable_xss" - enable_xss=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to try to use XScreenSaver" >&5 +$as_echo_n "checking whether to try to use XScreenSaver... " >&6; } + # Check whether --enable-xss was given. +if test "${enable_xss+set}" = set; then : + enableval=$enable_xss; enable_xss=$enableval else enable_xss=yes -fi; +fi + if test "$enable_xss" = "no" ; then - echo "$as_me:$LINENO: result: $enable_xss" >&5 -echo "${ECHO_T}$enable_xss" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_xss" >&5 +$as_echo "$enable_xss" >&6; } else - echo "$as_me:$LINENO: result: $enable_xss" >&5 -echo "${ECHO_T}$enable_xss" >&6 - echo "$as_me:$LINENO: checking for X11/extensions/scrnsaver.h" >&5 -echo $ECHO_N "checking for X11/extensions/scrnsaver.h... $ECHO_C" >&6 -if test "${ac_cv_header_X11_extensions_scrnsaver_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_X11_extensions_scrnsaver_h=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_X11_extensions_scrnsaver_h=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_scrnsaver_h" >&5 -echo "${ECHO_T}$ac_cv_header_X11_extensions_scrnsaver_h" >&6 -if test $ac_cv_header_X11_extensions_scrnsaver_h = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_xss" >&5 +$as_echo "$enable_xss" >&6; } + ac_fn_c_check_header_compile "$LINENO" "X11/extensions/scrnsaver.h" "ac_cv_header_X11_extensions_scrnsaver_h" "#include +" +if test "x$ac_cv_header_X11_extensions_scrnsaver_h" = xyes; then : xss_header_found=yes fi - echo "$as_me:$LINENO: checking for XScreenSaverQueryInfo" >&5 -echo $ECHO_N "checking for XScreenSaverQueryInfo... $ECHO_C" >&6 -if test "${ac_cv_func_XScreenSaverQueryInfo+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define XScreenSaverQueryInfo to an innocuous variant, in case declares XScreenSaverQueryInfo. - For example, HP-UX 11i declares gettimeofday. */ -#define XScreenSaverQueryInfo innocuous_XScreenSaverQueryInfo - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char XScreenSaverQueryInfo (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef XScreenSaverQueryInfo - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char XScreenSaverQueryInfo (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_XScreenSaverQueryInfo) || defined (__stub___XScreenSaverQueryInfo) -choke me -#else -char (*f) () = XScreenSaverQueryInfo; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != XScreenSaverQueryInfo; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_XScreenSaverQueryInfo=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ac_fn_c_check_func "$LINENO" "XScreenSaverQueryInfo" "ac_cv_func_XScreenSaverQueryInfo" +if test "x$ac_cv_func_XScreenSaverQueryInfo" = xyes; then : -ac_cv_func_XScreenSaverQueryInfo=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_XScreenSaverQueryInfo" >&5 -echo "${ECHO_T}$ac_cv_func_XScreenSaverQueryInfo" >&6 -if test $ac_cv_func_XScreenSaverQueryInfo = yes; then - : else - echo "$as_me:$LINENO: checking for XScreenSaverQueryInfo in -lXext" >&5 -echo $ECHO_N "checking for XScreenSaverQueryInfo in -lXext... $ECHO_C" >&6 -if test "${ac_cv_lib_Xext_XScreenSaverQueryInfo+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XScreenSaverQueryInfo in -lXext" >&5 +$as_echo_n "checking for XScreenSaverQueryInfo in -lXext... " >&6; } +if ${ac_cv_lib_Xext_XScreenSaverQueryInfo+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lXext $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char XScreenSaverQueryInfo (); int main () { -XScreenSaverQueryInfo (); +return XScreenSaverQueryInfo (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_Xext_XScreenSaverQueryInfo=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_Xext_XScreenSaverQueryInfo=no + ac_cv_lib_Xext_XScreenSaverQueryInfo=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_Xext_XScreenSaverQueryInfo" >&5 -echo "${ECHO_T}$ac_cv_lib_Xext_XScreenSaverQueryInfo" >&6 -if test $ac_cv_lib_Xext_XScreenSaverQueryInfo = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xext_XScreenSaverQueryInfo" >&5 +$as_echo "$ac_cv_lib_Xext_XScreenSaverQueryInfo" >&6; } +if test "x$ac_cv_lib_Xext_XScreenSaverQueryInfo" = xyes; then : XLIBSW="$XLIBSW -lXext" xss_lib_found=yes else - echo "$as_me:$LINENO: checking for XScreenSaverQueryInfo in -lXss" >&5 -echo $ECHO_N "checking for XScreenSaverQueryInfo in -lXss... $ECHO_C" >&6 -if test "${ac_cv_lib_Xss_XScreenSaverQueryInfo+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XScreenSaverQueryInfo in -lXss" >&5 +$as_echo_n "checking for XScreenSaverQueryInfo in -lXss... " >&6; } +if ${ac_cv_lib_Xss_XScreenSaverQueryInfo+:} false; then : + $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lXss -lXext $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ char XScreenSaverQueryInfo (); int main () { -XScreenSaverQueryInfo (); +return XScreenSaverQueryInfo (); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_Xss_XScreenSaverQueryInfo=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_Xss_XScreenSaverQueryInfo=no + ac_cv_lib_Xss_XScreenSaverQueryInfo=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -echo "$as_me:$LINENO: result: $ac_cv_lib_Xss_XScreenSaverQueryInfo" >&5 -echo "${ECHO_T}$ac_cv_lib_Xss_XScreenSaverQueryInfo" >&6 -if test $ac_cv_lib_Xss_XScreenSaverQueryInfo = yes; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_Xss_XScreenSaverQueryInfo" >&5 +$as_echo "$ac_cv_lib_Xss_XScreenSaverQueryInfo" >&6; } +if test "x$ac_cv_lib_Xss_XScreenSaverQueryInfo" = xyes; then : if test "$tcl_cv_ld_weak_l" = yes; then # On Darwin, weak link libXss if possible, @@ -10978,9 +8600,7 @@ fi fi if test $enable_xss = yes -a $xss_lib_found = yes -a $xss_header_found = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_XSS 1 -_ACEOF +$as_echo "#define HAVE_XSS 1" >>confdefs.h fi CFLAGS=$tk_oldCFlags @@ -10992,66 +8612,36 @@ fi # #define for __CHAR_UNSIGNED__. #-------------------------------------------------------------------- - -echo "$as_me:$LINENO: checking whether char is unsigned" >&5 -echo $ECHO_N "checking whether char is unsigned... $ECHO_C" >&6 -if test "${ac_cv_c_char_unsigned+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether char is unsigned" >&5 +$as_echo_n "checking whether char is unsigned... " >&6; } +if ${ac_cv_c_char_unsigned+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !(((char) -1) < 0)]; -test_array [0] = 0 +test_array [0] = 0; +return test_array [0]; ; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_char_unsigned=no else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_c_char_unsigned=yes + ac_cv_c_char_unsigned=yes fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_c_char_unsigned" >&5 -echo "${ECHO_T}$ac_cv_c_char_unsigned" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_char_unsigned" >&5 +$as_echo "$ac_cv_c_char_unsigned" >&6; } if test $ac_cv_c_char_unsigned = yes && test "$GCC" != yes; then - cat >>confdefs.h <<\_ACEOF -#define __CHAR_UNSIGNED__ 1 -_ACEOF + $as_echo "#define __CHAR_UNSIGNED__ 1" >>confdefs.h fi @@ -11090,38 +8680,38 @@ WISH_RSRC_FILE='wish$(VERSION).rsrc' if test "`uname -s`" = "Darwin" ; then if test "`uname -s`" = "Darwin" ; then - echo "$as_me:$LINENO: checking how to package libraries" >&5 -echo $ECHO_N "checking how to package libraries... $ECHO_C" >&6 - # Check whether --enable-framework or --disable-framework was given. -if test "${enable_framework+set}" = set; then - enableval="$enable_framework" - enable_framework=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to package libraries" >&5 +$as_echo_n "checking how to package libraries... " >&6; } + # Check whether --enable-framework was given. +if test "${enable_framework+set}" = set; then : + enableval=$enable_framework; enable_framework=$enableval else enable_framework=no -fi; +fi + if test $enable_framework = yes; then if test $SHARED_BUILD = 0; then - { echo "$as_me:$LINENO: WARNING: Frameworks can only be built if --enable-shared is yes" >&5 -echo "$as_me: WARNING: Frameworks can only be built if --enable-shared is yes" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Frameworks can only be built if --enable-shared is yes" >&5 +$as_echo "$as_me: WARNING: Frameworks can only be built if --enable-shared is yes" >&2;} enable_framework=no fi if test $tcl_corefoundation = no; then - { echo "$as_me:$LINENO: WARNING: Frameworks can only be used when CoreFoundation is available" >&5 -echo "$as_me: WARNING: Frameworks can only be used when CoreFoundation is available" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Frameworks can only be used when CoreFoundation is available" >&5 +$as_echo "$as_me: WARNING: Frameworks can only be used when CoreFoundation is available" >&2;} enable_framework=no fi fi if test $enable_framework = yes; then - echo "$as_me:$LINENO: result: framework" >&5 -echo "${ECHO_T}framework" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: framework" >&5 +$as_echo "framework" >&6; } FRAMEWORK_BUILD=1 else if test $SHARED_BUILD = 1; then - echo "$as_me:$LINENO: result: shared library" >&5 -echo "${ECHO_T}shared library" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: shared library" >&5 +$as_echo "shared library" >&6; } else - echo "$as_me:$LINENO: result: static library" >&5 -echo "${ECHO_T}static library" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: static library" >&5 +$as_echo "static library" >&6; } fi FRAMEWORK_BUILD=0 fi @@ -11133,7 +8723,7 @@ echo "${ECHO_T}static library" >&6 TK_SHLIB_LD_EXTRAS="${TK_SHLIB_LD_EXTRAS}"' -sectcreate __TEXT __info_plist Tk-Info.plist' EXTRA_WISH_LIBS='-sectcreate __TEXT __info_plist Wish-Info.plist' EXTRA_APP_CC_SWITCHES="${EXTRA_APP_CC_SWITCHES}"' -mdynamic-no-pic' - ac_config_files="$ac_config_files Tk-Info.plist:../macosx/Tk-Info.plist.in Wish-Info.plist:../macosx/Wish-Info.plist.in" + ac_config_files="$ac_config_files Tk-Info.plist:../macosx/Tk-Info.plist.in Wish-Info.plist:../macosx/Wish-Info.plist.in" for l in ${LOCALES}; do CFBUNDLELOCALIZATIONS="${CFBUNDLELOCALIZATIONS}$l"; done TK_YEAR="`date +%Y`" @@ -11141,13 +8731,11 @@ fi if test "$FRAMEWORK_BUILD" = "1" ; then -cat >>confdefs.h <<\_ACEOF -#define TK_FRAMEWORK 1 -_ACEOF +$as_echo "#define TK_FRAMEWORK 1" >>confdefs.h # Construct a fake local framework structure to make linking with # '-framework Tk' and running of tktest work - ac_config_commands="$ac_config_commands Tk.framework" + ac_config_commands="$ac_config_commands Tk.framework" LD_LIBRARY_PATH_VAR="DYLD_FRAMEWORK_PATH" if test "${libdir}" = '${exec_prefix}/lib'; then @@ -11285,7 +8873,7 @@ TK_SHARED_BUILD=${SHARED_BUILD} - ac_config_files="$ac_config_files Makefile:../unix/Makefile.in tkConfig.sh:../unix/tkConfig.sh.in tk.pc:../unix/tk.pc.in" +ac_config_files="$ac_config_files Makefile:../unix/Makefile.in tkConfig.sh:../unix/tkConfig.sh.in tk.pc:../unix/tk.pc.in" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -11305,39 +8893,70 @@ _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. +# So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. -{ +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; + ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} | + esac | + sort +) | sed ' + /^ac_cv_env_/b end t clear - : clear + :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi else - echo "not updating unwritable cache $cache_file" + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache @@ -11346,63 +8965,55 @@ test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. # # If the first sed substitution is executed (which looks for macros that -# take arguments), then we branch to the quote section. Otherwise, +# take arguments), then branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. -cat >confdef2opt.sed <<\_ACEOF +ac_script=' +:mline +/\\$/{ + N + s,\\\n,, + b mline +} t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g t quote -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g t quote -d -: quote -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g -s,\[,\\&,g -s,\],\\&,g -s,\$,$$,g -p -_ACEOF -# We use echo to avoid assuming a particular line-breaking character. -# The extra dot is to prevent the shell from consuming trailing -# line-breaks from the sub-command output. A line-break within -# single-quotes doesn't work because, if this script is created in a -# platform that uses two characters for line-breaks (e.g., DOS), tr -# would break. -ac_LF_and_DOT=`echo; echo .` -DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` -rm -f confdef2opt.sed +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` ac_libobjs= ac_ltlibobjs= +U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs @@ -11411,12 +9022,15 @@ LTLIBOBJS=$ac_ltlibobjs CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS="" -: ${CONFIG_STATUS=./config.status} + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. @@ -11426,81 +9040,253 @@ cat >$CONFIG_STATUS <<_ACEOF debug=false ac_cs_recheck=false ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi -DUALCASE=1; export DUALCASE # for MKS sh -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' fi +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi -done + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -# Name of the executable. -as_me=`$as_basename "$0" || +as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` - -# PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' @@ -11508,148 +9294,111 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file else - as_expr=false + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + +} # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi -as_executable_p="test -f" + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -11658,31 +9407,20 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - exec 6>&1 - -# Open the log real soon, to keep \$[0] and so on meaningful, and to +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - -This file was extended by tk $as_me 8.6, which was -generated by GNU Autoconf 2.59. Invocation command line was +# values after options handling. +ac_log=" +This file was extended by tk $as_me 8.7, which was +generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -11690,43 +9428,41 @@ generated by GNU Autoconf 2.59. Invocation command line was CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + _ACEOF -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_commands="$ac_config_commands" -cat >>$CONFIG_STATUS <<\_ACEOF +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. -Usage: $0 [OPTIONS] [FILE]... +Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE Configuration files: $config_files @@ -11734,83 +9470,78 @@ $config_files Configuration commands: $config_commands -Report bugs to ." -_ACEOF +Report bugs to the package provider." -cat >>$CONFIG_STATUS <<_ACEOF +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -tk config.status 8.6 -configured by $0, generated by GNU Autoconf 2.59, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" +tk config.status 8.7 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" -Copyright (C) 2003 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +test -n "\$AWK" || AWK=awk _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in - --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; - -*) + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; esac case $ac_option in # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; - *) ac_config_targets="$ac_config_targets $1" ;; + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; esac shift @@ -11824,42 +9555,54 @@ if $ac_cs_silent; then fi _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" fi _ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 -cat >>$CONFIG_STATUS <<_ACEOF +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # -# INIT-COMMANDS section. +# INIT-COMMANDS # - VERSION=${TK_VERSION} && tk_aqua=${tk_aqua} _ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF +# Handling of arguments. for ac_config_target in $ac_config_targets do - case "$ac_config_target" in - # Handling of arguments. - "Tk-Info.plist" ) CONFIG_FILES="$CONFIG_FILES Tk-Info.plist:../macosx/Tk-Info.plist.in" ;; - "Wish-Info.plist" ) CONFIG_FILES="$CONFIG_FILES Wish-Info.plist:../macosx/Wish-Info.plist.in" ;; - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile:../unix/Makefile.in" ;; - "tkConfig.sh" ) CONFIG_FILES="$CONFIG_FILES tkConfig.sh:../unix/tkConfig.sh.in" ;; - "tk.pc" ) CONFIG_FILES="$CONFIG_FILES tk.pc:../unix/tk.pc.in" ;; - "Tk.framework" ) CONFIG_COMMANDS="$CONFIG_COMMANDS Tk.framework" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; + case $ac_config_target in + "Tk-Info.plist") CONFIG_FILES="$CONFIG_FILES Tk-Info.plist:../macosx/Tk-Info.plist.in" ;; + "Wish-Info.plist") CONFIG_FILES="$CONFIG_FILES Wish-Info.plist:../macosx/Wish-Info.plist.in" ;; + "Tk.framework") CONFIG_COMMANDS="$CONFIG_COMMANDS Tk.framework" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile:../unix/Makefile.in" ;; + "tkConfig.sh") CONFIG_FILES="$CONFIG_FILES tkConfig.sh:../unix/tkConfig.sh.in" ;; + "tk.pc") CONFIG_FILES="$CONFIG_FILES tk.pc:../unix/tk.pc.in" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done + # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely @@ -11870,523 +9613,409 @@ if $ac_need_defaults; then fi # Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, +# simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. $debug || { - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 } - # Create a (secure) tmp directory for tmp files. { - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" } || { - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) -} || + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} { - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" -# -# CONFIG_FILES section. -# -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@TCL_VERSION@,$TCL_VERSION,;t t -s,@TCL_PATCH_LEVEL@,$TCL_PATCH_LEVEL,;t t -s,@TCL_BIN_DIR@,$TCL_BIN_DIR,;t t -s,@TCL_SRC_DIR@,$TCL_SRC_DIR,;t t -s,@TCL_LIB_FILE@,$TCL_LIB_FILE,;t t -s,@TCL_LIB_FLAG@,$TCL_LIB_FLAG,;t t -s,@TCL_LIB_SPEC@,$TCL_LIB_SPEC,;t t -s,@TCL_STUB_LIB_FILE@,$TCL_STUB_LIB_FILE,;t t -s,@TCL_STUB_LIB_FLAG@,$TCL_STUB_LIB_FLAG,;t t -s,@TCL_STUB_LIB_SPEC@,$TCL_STUB_LIB_SPEC,;t t -s,@TCLSH_PROG@,$TCLSH_PROG,;t t -s,@BUILD_TCLSH@,$BUILD_TCLSH,;t t -s,@MAN_FLAGS@,$MAN_FLAGS,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@CPP@,$CPP,;t t -s,@EGREP@,$EGREP,;t t -s,@TCL_THREADS@,$TCL_THREADS,;t t -s,@RANLIB@,$RANLIB,;t t -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@AR@,$AR,;t t -s,@ac_ct_AR@,$ac_ct_AR,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@TCL_LIBS@,$TCL_LIBS,;t t -s,@DL_LIBS@,$DL_LIBS,;t t -s,@DL_OBJS@,$DL_OBJS,;t t -s,@PLAT_OBJS@,$PLAT_OBJS,;t t -s,@PLAT_SRCS@,$PLAT_SRCS,;t t -s,@LDAIX_SRC@,$LDAIX_SRC,;t t -s,@CFLAGS_DEBUG@,$CFLAGS_DEBUG,;t t -s,@CFLAGS_OPTIMIZE@,$CFLAGS_OPTIMIZE,;t t -s,@CFLAGS_WARNING@,$CFLAGS_WARNING,;t t -s,@LDFLAGS_DEBUG@,$LDFLAGS_DEBUG,;t t -s,@LDFLAGS_OPTIMIZE@,$LDFLAGS_OPTIMIZE,;t t -s,@CC_SEARCH_FLAGS@,$CC_SEARCH_FLAGS,;t t -s,@LD_SEARCH_FLAGS@,$LD_SEARCH_FLAGS,;t t -s,@STLIB_LD@,$STLIB_LD,;t t -s,@SHLIB_LD@,$SHLIB_LD,;t t -s,@TCL_SHLIB_LD_EXTRAS@,$TCL_SHLIB_LD_EXTRAS,;t t -s,@TK_SHLIB_LD_EXTRAS@,$TK_SHLIB_LD_EXTRAS,;t t -s,@SHLIB_LD_LIBS@,$SHLIB_LD_LIBS,;t t -s,@SHLIB_CFLAGS@,$SHLIB_CFLAGS,;t t -s,@SHLIB_SUFFIX@,$SHLIB_SUFFIX,;t t -s,@MAKE_LIB@,$MAKE_LIB,;t t -s,@MAKE_STUB_LIB@,$MAKE_STUB_LIB,;t t -s,@INSTALL_LIB@,$INSTALL_LIB,;t t -s,@DLL_INSTALL_DIR@,$DLL_INSTALL_DIR,;t t -s,@INSTALL_STUB_LIB@,$INSTALL_STUB_LIB,;t t -s,@CFLAGS_DEFAULT@,$CFLAGS_DEFAULT,;t t -s,@LDFLAGS_DEFAULT@,$LDFLAGS_DEFAULT,;t t -s,@XFT_CFLAGS@,$XFT_CFLAGS,;t t -s,@XFT_LIBS@,$XFT_LIBS,;t t -s,@UNIX_FONT_OBJS@,$UNIX_FONT_OBJS,;t t -s,@TK_VERSION@,$TK_VERSION,;t t -s,@TK_MAJOR_VERSION@,$TK_MAJOR_VERSION,;t t -s,@TK_MINOR_VERSION@,$TK_MINOR_VERSION,;t t -s,@TK_PATCH_LEVEL@,$TK_PATCH_LEVEL,;t t -s,@TK_YEAR@,$TK_YEAR,;t t -s,@TK_LIB_FILE@,$TK_LIB_FILE,;t t -s,@TK_LIB_FLAG@,$TK_LIB_FLAG,;t t -s,@TK_LIB_SPEC@,$TK_LIB_SPEC,;t t -s,@TK_STUB_LIB_FILE@,$TK_STUB_LIB_FILE,;t t -s,@TK_STUB_LIB_FLAG@,$TK_STUB_LIB_FLAG,;t t -s,@TK_STUB_LIB_SPEC@,$TK_STUB_LIB_SPEC,;t t -s,@TK_STUB_LIB_PATH@,$TK_STUB_LIB_PATH,;t t -s,@TK_INCLUDE_SPEC@,$TK_INCLUDE_SPEC,;t t -s,@TK_BUILD_STUB_LIB_SPEC@,$TK_BUILD_STUB_LIB_SPEC,;t t -s,@TK_BUILD_STUB_LIB_PATH@,$TK_BUILD_STUB_LIB_PATH,;t t -s,@TK_SRC_DIR@,$TK_SRC_DIR,;t t -s,@TK_SHARED_BUILD@,$TK_SHARED_BUILD,;t t -s,@LD_LIBRARY_PATH_VAR@,$LD_LIBRARY_PATH_VAR,;t t -s,@TK_BUILD_LIB_SPEC@,$TK_BUILD_LIB_SPEC,;t t -s,@TCL_STUB_FLAGS@,$TCL_STUB_FLAGS,;t t -s,@XINCLUDES@,$XINCLUDES,;t t -s,@XLIBSW@,$XLIBSW,;t t -s,@LOCALES@,$LOCALES,;t t -s,@TK_WINDOWINGSYSTEM@,$TK_WINDOWINGSYSTEM,;t t -s,@TK_PKG_DIR@,$TK_PKG_DIR,;t t -s,@TK_LIBRARY@,$TK_LIBRARY,;t t -s,@LIB_RUNTIME_DIR@,$LIB_RUNTIME_DIR,;t t -s,@PRIVATE_INCLUDE_DIR@,$PRIVATE_INCLUDE_DIR,;t t -s,@HTML_DIR@,$HTML_DIR,;t t -s,@EXTRA_CC_SWITCHES@,$EXTRA_CC_SWITCHES,;t t -s,@EXTRA_APP_CC_SWITCHES@,$EXTRA_APP_CC_SWITCHES,;t t -s,@EXTRA_INSTALL@,$EXTRA_INSTALL,;t t -s,@EXTRA_INSTALL_BINARIES@,$EXTRA_INSTALL_BINARIES,;t t -s,@EXTRA_BUILD_HTML@,$EXTRA_BUILD_HTML,;t t -s,@EXTRA_WISH_LIBS@,$EXTRA_WISH_LIBS,;t t -s,@CFBUNDLELOCALIZATIONS@,$CFBUNDLELOCALIZATIONS,;t t -s,@TK_RSRC_FILE@,$TK_RSRC_FILE,;t t -s,@WISH_RSRC_FILE@,$WISH_RSRC_FILE,;t t -s,@LIB_RSRC_FILE@,$LIB_RSRC_FILE,;t t -s,@APP_RSRC_FILE@,$APP_RSRC_FILE,;t t -s,@REZ@,$REZ,;t t -s,@REZ_FLAGS@,$REZ_FLAGS,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` +eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat - fi -fi # test -n "$CONFIG_FILES" + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; esac - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || + ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac + case $ac_mode in + :F) + # + # CONFIG_FILE + # +_ACEOF - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub $extrasub _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_COMMANDS section. -# -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_dir=`(dirname "$ac_dest") 2>/dev/null || -$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_dest" : 'X\(//\)[^/]' \| \ - X"$ac_dest" : 'X\(//\)$' \| \ - X"$ac_dest" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_dest" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - ac_builddir=. +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac - { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 -echo "$as_me: executing $ac_dest commands" >&6;} - case $ac_dest in - Tk.framework ) n=Tk && + case $ac_file$ac_mode in + "Tk.framework":C) n=Tk && f=$n.framework && v=Versions/$VERSION && rm -rf $f && mkdir -p $f/$v/Resources && ln -s $v/$n $v/Resources $f && ln -s ../../../$n $f/$v && @@ -12394,17 +10023,18 @@ echo "$as_me: executing $ac_dest commands" >&6;} if test $tk_aqua = yes; then ln -s ../../../../$n.rsrc $f/$v/Resources; fi && unset n f v ;; + esac -done -_ACEOF +done # for ac_tag -cat >>$CONFIG_STATUS <<\_ACEOF -{ (exit 0); exit 0; } +as_fn_exit 0 _ACEOF -chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. @@ -12424,7 +10054,11 @@ if test "$no_create" != yes; then exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi diff --git a/unix/configure.in b/unix/configure.in index cb412af..a748246 100644 --- a/unix/configure.in +++ b/unix/configure.in @@ -3,8 +3,8 @@ dnl This file is an input file used by the GNU "autoconf" program to dnl generate the file "configure", which is run during Tk installation dnl to configure the system for the local environment. -AC_INIT([tk],[8.6]) -AC_PREREQ(2.59) +AC_INIT([tk],[8.7]) +AC_PREREQ(2.69) dnl This is only used when included from macosx/configure.ac m4_ifdef([SC_USE_CONFIG_HEADERS], [ @@ -22,10 +22,10 @@ m4_ifdef([SC_USE_CONFIG_HEADERS], [ #endif /* _TKCONFIG */]) ]) -TK_VERSION=8.6 +TK_VERSION=8.7 TK_MAJOR_VERSION=8 -TK_MINOR_VERSION=6 -TK_PATCH_LEVEL=".5" +TK_MINOR_VERSION=7 +TK_PATCH_LEVEL="a0" VERSION=${TK_VERSION} LOCALES="cs da de el en en_gb eo es fr hu it nl pl pt ru sv" diff --git a/unix/tk.spec b/unix/tk.spec index e43e28e..c4ec12b 100644 --- a/unix/tk.spec +++ b/unix/tk.spec @@ -4,15 +4,15 @@ Name: tk Summary: Tk graphical toolkit for the Tcl scripting language. -Version: 8.6.5 +Version: 8.7a0 Release: 2 License: BSD Group: Development/Languages Source: http://prdownloads.sourceforge.net/tcl/tk%{version}-src.tar.gz URL: http://www.tcl.tk/ Buildroot: /var/tmp/%{name}%{version} -Buildrequires: XFree86-devel tcl >= %version -Requires: tcl >= %version +Buildrequires: XFree86-devel tcl >= 8.6.0 +Requires: tcl >= 8.6.0 %description The Tcl (Tool Command Language) provides a powerful platform for diff --git a/win/README b/win/README index 8670446..7f1818e 100644 --- a/win/README +++ b/win/README @@ -1,4 +1,4 @@ -Tk 8.6 for Windows +Tk 8.7 for Windows Originally by Scott Stanton while at Sun Microsystems Labs diff --git a/win/configure b/win/configure index cbac248..494e71a 100755 --- a/win/configure +++ b/win/configure @@ -1,81 +1,459 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59. +# Generated by GNU Autoconf 2.69. +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# # -# Copyright (C) 2003 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi -DUALCASE=1; export DUALCASE # for MKS sh -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } fi -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." else - $as_unset $as_var + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." fi -done + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -# Name of the executable. -as_me=`$as_basename "$0" || +as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` - -# PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' @@ -83,146 +461,91 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop - s,-$,, - s,^['$as_cr_digits']*\n,, + s/-\n.*// ' >$as_me.lineno && - chmod +x $as_me.lineno || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" # Exit status is that of the last command. exit } - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file else - as_expr=false + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi -as_executable_p="test -f" +as_test_x='test -x' +as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -231,38 +554,25 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - +test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -exec 6>&1 - # # Initializations. # ac_default_prefix=/usr/local +ac_clean_files= ac_config_libobj_dir=. +LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} # Identity of this package. PACKAGE_NAME= @@ -270,51 +580,212 @@ PACKAGE_TARNAME= PACKAGE_VERSION= PACKAGE_STRING= PACKAGE_BUGREPORT= +PACKAGE_URL= ac_unique_file="../generic/tk.h" # Factoring default headers for most tests. ac_includes_default="\ #include -#if HAVE_SYS_TYPES_H +#ifdef HAVE_SYS_TYPES_H # include #endif -#if HAVE_SYS_STAT_H +#ifdef HAVE_SYS_STAT_H # include #endif -#if STDC_HEADERS +#ifdef STDC_HEADERS # include # include #else -# if HAVE_STDLIB_H +# ifdef HAVE_STDLIB_H # include # endif #endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif -#if HAVE_STRINGS_H +#ifdef HAVE_STRINGS_H # include #endif -#if HAVE_INTTYPES_H +#ifdef HAVE_INTTYPES_H # include -#else -# if HAVE_STDINT_H -# include -# endif #endif -#if HAVE_UNISTD_H +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP EGREP AR ac_ct_AR RANLIB ac_ct_RANLIB RC ac_ct_RC SET_MAKE TCL_THREADS TCL_VERSION TCL_BIN_DIR TCL_SRC_DIR TCL_LIB_FILE TCL_LIB_FLAG TCL_LIB_SPEC TCL_STUB_LIB_FILE TCL_STUB_LIB_FLAG TCL_STUB_LIB_SPEC TCL_DEFS CYGPATH CELIB_DIR DL_LIBS CFLAGS_DEBUG CFLAGS_OPTIMIZE CFLAGS_WARNING MAN2TCLFLAGS CFLAGS_DEFAULT LDFLAGS_DEFAULT VC_MANIFEST_EMBED_DLL VC_MANIFEST_EMBED_EXE BUILD_TCLSH TCLSH_PROG TK_WIN_VERSION MACHINE TK_VERSION TK_MAJOR_VERSION TK_MINOR_VERSION TK_PATCH_LEVEL TK_DBGX TK_LIB_FILE TK_DLL_FILE TK_STUB_LIB_FILE TK_STUB_LIB_FLAG TK_BUILD_STUB_LIB_SPEC TK_SRC_DIR TK_BIN_DIR TCL_MAJOR_VERSION TCL_MINOR_VERSION TCL_PATCH_LEVEL TCL_DBGX CFG_TK_SHARED_LIB_SUFFIX CFG_TK_UNSHARED_LIB_SUFFIX CFG_TK_EXPORT_FILE_SUFFIX EXTRA_CFLAGS DEPARG CC_OBJNAME CC_EXENAME LDFLAGS_DEBUG LDFLAGS_OPTIMIZE LDFLAGS_CONSOLE LDFLAGS_WINDOW TK_RES STLIB_LD SHLIB_LD SHLIB_LD_LIBS SHLIB_CFLAGS SHLIB_SUFFIX TK_SHARED_BUILD LIBS_GUI DLLSUFFIX LIBPREFIX LIBSUFFIX EXESUFFIX LIBRARIES MAKE_LIB MAKE_STUB_LIB POST_MAKE_LIB MAKE_DLL MAKE_EXE TK_LIB_FLAG TK_LIB_SPEC TK_BUILD_LIB_SPEC TK_STUB_LIB_SPEC TK_STUB_LIB_PATH TK_BUILD_STUB_LIB_PATH TK_CC_SEARCH_FLAGS TK_LD_SEARCH_FLAGS RC_OUT RC_TYPE RC_INCLUDE RC_DEFINE RC_DEFINES RES LIBOBJS LTLIBOBJS' +ac_subst_vars='LTLIBOBJS +LIBOBJS +RES +RC_DEFINES +RC_DEFINE +RC_INCLUDE +RC_TYPE +RC_OUT +TK_LD_SEARCH_FLAGS +TK_CC_SEARCH_FLAGS +TK_BUILD_STUB_LIB_PATH +TK_STUB_LIB_PATH +TK_STUB_LIB_SPEC +TK_BUILD_LIB_SPEC +TK_LIB_SPEC +TK_LIB_FLAG +MAKE_EXE +MAKE_DLL +POST_MAKE_LIB +MAKE_STUB_LIB +MAKE_LIB +LIBRARIES +EXESUFFIX +LIBSUFFIX +LIBPREFIX +DLLSUFFIX +LIBS_GUI +TK_SHARED_BUILD +SHLIB_SUFFIX +SHLIB_CFLAGS +SHLIB_LD_LIBS +SHLIB_LD +STLIB_LD +TK_RES +LDFLAGS_WINDOW +LDFLAGS_CONSOLE +LDFLAGS_OPTIMIZE +LDFLAGS_DEBUG +CC_EXENAME +CC_OBJNAME +DEPARG +EXTRA_CFLAGS +CFG_TK_EXPORT_FILE_SUFFIX +CFG_TK_UNSHARED_LIB_SUFFIX +CFG_TK_SHARED_LIB_SUFFIX +TCL_DBGX +TCL_PATCH_LEVEL +TCL_MINOR_VERSION +TCL_MAJOR_VERSION +TK_BIN_DIR +TK_SRC_DIR +TK_BUILD_STUB_LIB_SPEC +TK_STUB_LIB_FLAG +TK_STUB_LIB_FILE +TK_DLL_FILE +TK_LIB_FILE +TK_DBGX +TK_PATCH_LEVEL +TK_MINOR_VERSION +TK_MAJOR_VERSION +TK_VERSION +MACHINE +TK_WIN_VERSION +TCLSH_PROG +BUILD_TCLSH +VC_MANIFEST_EMBED_EXE +VC_MANIFEST_EMBED_DLL +LDFLAGS_DEFAULT +CFLAGS_DEFAULT +MAN2TCLFLAGS +CFLAGS_WARNING +CFLAGS_OPTIMIZE +CFLAGS_DEBUG +DL_LIBS +CELIB_DIR +CYGPATH +TCL_DEFS +TCL_STUB_LIB_SPEC +TCL_STUB_LIB_FLAG +TCL_STUB_LIB_FILE +TCL_LIB_SPEC +TCL_LIB_FLAG +TCL_LIB_FILE +TCL_SRC_DIR +TCL_BIN_DIR +TCL_VERSION +TCL_THREADS +SET_MAKE +RC +RANLIB +AR +EGREP +GREP +CPP +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_threads +enable_shared +with_tcl +enable_64bit +enable_wince +with_celib +enable_symbols +enable_embedded_manifest +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP' + # Initialize some variables set by options. ac_init_help= ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null @@ -337,34 +808,49 @@ x_libraries=NONE # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' +datarootdir='${prefix}/share' +datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' +docdir='${datarootdir}/doc/${PACKAGE}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' ac_prev= +ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" + eval $ac_prev=\$ac_option ac_prev= continue fi - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac # Accept the important Cygnus configure options, so we can diagnose typos. - case $ac_option in + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; @@ -386,33 +872,59 @@ do --config-cache | -C) cache_file=config.cache ;; - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) + -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; esac - eval "enable_$ac_feature='$ac_optarg'" ;; + eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -439,6 +951,12 @@ do -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; @@ -463,13 +981,16 @@ do | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) + | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) @@ -534,6 +1055,16 @@ do | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; @@ -584,26 +1115,36 @@ do ac_init_version=: ;; -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; esac - eval "with_$ac_package='$ac_optarg'" ;; + eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. @@ -623,27 +1164,26 @@ do | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac @@ -651,31 +1191,36 @@ done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "missing argument to $ac_option" fi -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac -done +fi -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir do - eval ac_val=$`echo $ac_var` + eval ac_val=\$$ac_var + # Remove trailing slashes. case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' @@ -689,8 +1234,6 @@ target=$target_alias if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -702,74 +1245,72 @@ test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then + if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done # # Report the --help message. @@ -792,20 +1333,17 @@ Configuration: --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages + -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] -_ACEOF - - cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] + [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] + [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify @@ -815,18 +1353,25 @@ for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF @@ -838,6 +1383,7 @@ if test -n "$ac_init_help"; then cat <<\_ACEOF Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-threads build with threads (default: on) @@ -860,167 +1406,424 @@ Some influential environment variables: CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. +Report bugs to the package provider. _ACEOF +ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. - ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue ac_builddir=. -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } done fi -test -n "$ac_init_help" && exit 0 +test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF +configure +generated by GNU Autoconf 2.69 -Copyright (C) 2003 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF - exit 0 + exit fi -exec 5>config.log -cat >&5 <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by $as_me, which was -generated by GNU Autoconf 2.59. Invocation command line was - $ $0 $@ +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## -_ACEOF +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () { -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` +} # ac_fn_c_try_compile -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -_ASUNAME + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done +} # ac_fn_c_try_cpp -} >&5 +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -cat >&5 <<_ACEOF + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval +} # ac_fn_c_try_run -## ----------- ## -## Core tests. ## -## ----------- ## +# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES +# --------------------------------------------- +# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR +# accordingly. +ac_fn_c_check_decl () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + as_decl_name=`echo $2|sed 's/ *(.*//'` + as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 +$as_echo_n "checking whether $as_decl_name is declared... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +#ifndef $as_decl_name +#ifdef __cplusplus + (void) $as_decl_use; +#else + (void) $as_decl_name; +#endif +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_decl + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by $as_me, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## _ACEOF @@ -1033,7 +1836,6 @@ _ACEOF ac_configure_args= ac_configure_args0= ac_configure_args1= -ac_sep= ac_must_keep_next=false for ac_pass in 1 2 do @@ -1044,13 +1846,13 @@ do -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" + as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else @@ -1066,104 +1868,115 @@ do -* ) ac_must_keep_next=true ;; esac fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " + as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo - cat <<\_ASBOX -## ---------------- ## + $as_echo "## ---------------- ## ## Cache variables. ## -## ---------------- ## -_ASBOX +## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, -{ +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} + esac | + sort +) echo - cat <<\_ASBOX -## ----------------- ## + $as_echo "## ----------------- ## ## Output variables. ## -## ----------------- ## -_ASBOX +## ----------------- ##" echo for ac_var in $ac_subst_vars do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## -_ASBOX + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" echo for ac_var in $ac_subst_files do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## + $as_echo "## ----------- ## ## confdefs.h. ## -## ----------- ## -_ASBOX +## ----------- ##" echo - sed "/^$/d" confdefs.h | sort + cat confdefs.h echo fi test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" } >&5 - rm -f core *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status - ' 0 +' 0 for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. @@ -1171,112 +1984,137 @@ cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + # Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; esac fi else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do +for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -1287,32 +2125,15 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - - - - - - # The following define is needed when building with Cygwin since newer # versions of autoconf incorrectly set SHELL to /bin/bash instead of # /bin/sh. The bash shell seems to suffer from some strange failures. SHELL=/bin/sh -TK_VERSION=8.6 +TK_VERSION=8.7 TK_MAJOR_VERSION=8 -TK_MINOR_VERSION=6 -TK_PATCH_LEVEL=".5" +TK_MINOR_VERSION=7 +TK_PATCH_LEVEL="a0" VER=$TK_MAJOR_VERSION$TK_MINOR_VERSION #------------------------------------------------------------------------ @@ -1346,10 +2167,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -1359,35 +2180,37 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. @@ -1397,39 +2220,50 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -1439,77 +2273,37 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi + fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -1520,18 +2314,19 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. @@ -1549,24 +2344,25 @@ fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. @@ -1576,39 +2372,41 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC - for ac_prog in cl + for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. @@ -1618,66 +2416,78 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + test -n "$ac_ct_CC" && break done - CC=$ac_ct_CC + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi fi fi -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -1689,112 +2499,108 @@ main () } _ACEOF ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. break;; * ) break;; esac done +test "$ac_cv_exeext" = no && ac_cv_exeext= + else - echo "$as_me: failed program was:" >&5 + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } fi - +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -rm -f a.out a.exe conftest$ac_cv_exeext b.out +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with @@ -1802,88 +2608,141 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext break;; * ) break;; esac done else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ - +#include int main () { +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF -rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } fi - rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -1897,55 +2756,34 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no + ac_compiler_gnu=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -1956,39 +2794,49 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -ac_cv_prog_cc_g=no +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then @@ -2004,23 +2852,18 @@ else CFLAGS= fi fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 else - ac_cv_prog_cc_stdc=no + ac_cv_prog_cc_c89=no ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include -#include -#include +struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); @@ -2043,12 +2886,17 @@ static char *f (char * (*g) (char **, int), char **p, ...) /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std1 is added to get + as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std1. */ + that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; @@ -2063,205 +2911,37 @@ return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; return 0; } _ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg fi -rm -f conftest.err conftest.$ac_objext +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break done -rm -f conftest.$ac_ext conftest.$ac_objext +rm -f conftest.$ac_ext CC=$ac_save_CC fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac +if test "x$ac_cv_prog_cc_c89" != xno; then : -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -2269,18 +2949,14 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking for inline" >&5 -echo $ECHO_N "checking for inline... $ECHO_C" >&6 -if test "${ac_cv_c_inline+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 +$as_echo_n "checking for inline... " >&6; } +if ${ac_cv_c_inline+:} false; then : + $as_echo_n "(cached) " >&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifndef __cplusplus typedef int foo_t; @@ -2289,41 +2965,16 @@ $ac_kw foo_t foo () {return 0; } #endif _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_c_inline=$ac_kw; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_inline=$ac_kw fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test "$ac_cv_c_inline" != no && break done fi -echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 -echo "${ECHO_T}$ac_cv_c_inline" >&6 - +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 +$as_echo "$ac_cv_c_inline" >&6; } case $ac_cv_c_inline in inline | yes) ;; @@ -2345,15 +2996,15 @@ ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" @@ -2367,11 +3018,7 @@ do # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include @@ -2380,78 +3027,34 @@ cat >>conftest.$ac_ext <<_ACEOF #endif Syntax error _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_cpp "$LINENO"; then : +else # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers + # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then +if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. ac_preproc_ok=: break fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : break fi @@ -2463,8 +3066,8 @@ fi else ac_cv_prog_CPP=$CPP fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do @@ -2474,11 +3077,7 @@ do # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include @@ -2487,85 +3086,40 @@ cat >>conftest.$ac_ext <<_ACEOF #endif Syntax error _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_cpp "$LINENO"; then : +else # Broken: fails on valid input. continue fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext - # OK, works on sane cases. Now check whether non-existent headers + # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then +if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. ac_preproc_ok=: break fi -rm -f conftest.err conftest.$ac_ext +rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c @@ -2575,31 +3129,142 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include @@ -2614,51 +3279,23 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_stdc=no + ac_cv_header_stdc=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : + $EGREP "memchr" >/dev/null 2>&1; then : + else ac_cv_header_stdc=no fi @@ -2668,18 +3305,14 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : + $EGREP "free" >/dev/null 2>&1; then : + else ac_cv_header_stdc=no fi @@ -2689,16 +3322,13 @@ fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : : else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include +#include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) @@ -2718,41 +3348,26 @@ main () for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); + return 2; + return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_run "$LINENO"; then : -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +else + ac_cv_header_stdc=no fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + fi fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF +$as_echo "#define STDC_HEADERS 1" >>confdefs.h fi @@ -2760,10 +3375,10 @@ fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. @@ -2773,35 +3388,37 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AR="${ac_tool_prefix}ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then - echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi if test -z "$ac_cv_prog_AR"; then ac_ct_AR=$AR # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. @@ -2811,27 +3428,38 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_AR="ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then - echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -echo "${ECHO_T}$ac_ct_AR" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - AR=$ac_ct_AR + if test "x$ac_ct_AR" = x; then + AR="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi else AR="$ac_cv_prog_AR" fi @@ -2839,10 +3467,10 @@ fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. @@ -2852,35 +3480,37 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. @@ -2890,27 +3520,38 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - RANLIB=$ac_ct_RANLIB + if test "x$ac_ct_RANLIB" = x; then + RANLIB="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi else RANLIB="$ac_cv_prog_RANLIB" fi @@ -2918,10 +3559,10 @@ fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args. set dummy ${ac_tool_prefix}windres; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$RC"; then ac_cv_prog_RC="$RC" # Let the user override the test. @@ -2931,35 +3572,37 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_RC="${ac_tool_prefix}windres" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi RC=$ac_cv_prog_RC if test -n "$RC"; then - echo "$as_me:$LINENO: result: $RC" >&5 -echo "${ECHO_T}$RC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RC" >&5 +$as_echo "$RC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + fi if test -z "$ac_cv_prog_RC"; then ac_ct_RC=$RC # Extract the first word of "windres", so it can be a program name with args. set dummy windres; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RC+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RC"; then ac_cv_prog_ac_ct_RC="$ac_ct_RC" # Let the user override the test. @@ -2969,27 +3612,38 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_RC="windres" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS fi fi ac_ct_RC=$ac_cv_prog_ac_ct_RC if test -n "$ac_ct_RC"; then - echo "$as_me:$LINENO: result: $ac_ct_RC" >&5 -echo "${ECHO_T}$ac_ct_RC" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RC" >&5 +$as_echo "$ac_ct_RC" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - RC=$ac_ct_RC + if test "x$ac_ct_RC" = x; then + RC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RC=$ac_ct_RC + fi else RC="$ac_cv_prog_RC" fi @@ -2999,32 +3653,34 @@ fi # Checks to see if the make program sets the $MAKE variable. #-------------------------------------------------------------------- -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF +SHELL = /bin/sh all: - @echo 'ac_maketemp="$(MAKE)"' + @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac rm -f conftest.make fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } SET_MAKE= else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi @@ -3041,34 +3697,30 @@ fi #-------------------------------------------------------------------- - echo "$as_me:$LINENO: checking for building with threads" >&5 -echo $ECHO_N "checking for building with threads... $ECHO_C" >&6 - # Check whether --enable-threads or --disable-threads was given. -if test "${enable_threads+set}" = set; then - enableval="$enable_threads" - tcl_ok=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for building with threads" >&5 +$as_echo_n "checking for building with threads... " >&6; } + # Check whether --enable-threads was given. +if test "${enable_threads+set}" = set; then : + enableval=$enable_threads; tcl_ok=$enableval else tcl_ok=yes -fi; +fi + if test "$tcl_ok" = "yes"; then - echo "$as_me:$LINENO: result: yes (default)" >&5 -echo "${ECHO_T}yes (default)" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes (default)" >&5 +$as_echo "yes (default)" >&6; } TCL_THREADS=1 - cat >>confdefs.h <<\_ACEOF -#define TCL_THREADS 1 -_ACEOF + $as_echo "#define TCL_THREADS 1" >>confdefs.h # USE_THREAD_ALLOC tells us to try the special thread-based # allocator that significantly reduces lock contention - cat >>confdefs.h <<\_ACEOF -#define USE_THREAD_ALLOC 1 -_ACEOF + $as_echo "#define USE_THREAD_ALLOC 1" >>confdefs.h else TCL_THREADS=0 - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi @@ -3079,15 +3731,15 @@ echo "${ECHO_T}no" >&6 #-------------------------------------------------------------------- - echo "$as_me:$LINENO: checking how to build libraries" >&5 -echo $ECHO_N "checking how to build libraries... $ECHO_C" >&6 - # Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - tcl_ok=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to build libraries" >&5 +$as_echo_n "checking how to build libraries... " >&6; } + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; tcl_ok=$enableval else tcl_ok=yes -fi; +fi + if test "${enable_shared+set}" = set; then enableval="$enable_shared" @@ -3097,17 +3749,15 @@ fi; fi if test "$tcl_ok" = "yes" ; then - echo "$as_me:$LINENO: result: shared" >&5 -echo "${ECHO_T}shared" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: shared" >&5 +$as_echo "shared" >&6; } SHARED_BUILD=1 else - echo "$as_me:$LINENO: result: static" >&5 -echo "${ECHO_T}static" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: static" >&5 +$as_echo "static" >&6; } SHARED_BUILD=0 -cat >>confdefs.h <<\_ACEOF -#define STATIC_BUILD 1 -_ACEOF +$as_echo "#define STATIC_BUILD 1" >>confdefs.h fi @@ -3127,15 +3777,15 @@ _ACEOF # we reset no_tcl in case something fails here no_tcl=true -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" - with_tclconfig="${withval}" -fi; - echo "$as_me:$LINENO: checking for Tcl configuration" >&5 -echo $ECHO_N "checking for Tcl configuration... $ECHO_C" >&6 - if test "${ac_cv_c_tclconfig+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +# Check whether --with-tcl was given. +if test "${with_tcl+set}" = set; then : + withval=$with_tcl; with_tclconfig="${withval}" +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Tcl configuration" >&5 +$as_echo_n "checking for Tcl configuration... " >&6; } + if ${ac_cv_c_tclconfig+:} false; then : + $as_echo_n "(cached) " >&6 else @@ -3144,17 +3794,15 @@ else case "${with_tclconfig}" in */tclConfig.sh ) if test -f "${with_tclconfig}"; then - { echo "$as_me:$LINENO: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&5 -echo "$as_me: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&5 +$as_echo "$as_me: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&2;} with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" fi ;; esac if test -f "${with_tclconfig}/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" else - { { echo "$as_me:$LINENO: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&5 -echo "$as_me: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "${with_tclconfig} directory doesn't contain tclConfig.sh" "$LINENO" 5 fi fi @@ -3218,28 +3866,26 @@ fi if test x"${ac_cv_c_tclconfig}" = x ; then TCL_BIN_DIR="# no Tcl configs found" - { { echo "$as_me:$LINENO: error: Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh" >&5 -echo "$as_me: error: Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh" "$LINENO" 5 else no_tcl= TCL_BIN_DIR="${ac_cv_c_tclconfig}" - echo "$as_me:$LINENO: result: found ${TCL_BIN_DIR}/tclConfig.sh" >&5 -echo "${ECHO_T}found ${TCL_BIN_DIR}/tclConfig.sh" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: found ${TCL_BIN_DIR}/tclConfig.sh" >&5 +$as_echo "found ${TCL_BIN_DIR}/tclConfig.sh" >&6; } fi fi - echo "$as_me:$LINENO: checking for existence of ${TCL_BIN_DIR}/tclConfig.sh" >&5 -echo $ECHO_N "checking for existence of ${TCL_BIN_DIR}/tclConfig.sh... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for existence of ${TCL_BIN_DIR}/tclConfig.sh" >&5 +$as_echo_n "checking for existence of ${TCL_BIN_DIR}/tclConfig.sh... " >&6; } if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then - echo "$as_me:$LINENO: result: loading" >&5 -echo "${ECHO_T}loading" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: loading" >&5 +$as_echo "loading" >&6; } . "${TCL_BIN_DIR}/tclConfig.sh" else - echo "$as_me:$LINENO: result: could not find ${TCL_BIN_DIR}/tclConfig.sh" >&5 -echo "${ECHO_T}could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not find ${TCL_BIN_DIR}/tclConfig.sh" >&5 +$as_echo "could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6; } fi # @@ -3285,22 +3931,14 @@ echo "${ECHO_T}could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6 if test "${TCL_MAJOR_VERSION}" != "${TK_MAJOR_VERSION}"; then - { { echo "$as_me:$LINENO: error: ${TCL_BIN_DIR}/tclConfig.sh is for Tcl ${TCL_VERSION}. -Tk ${TK_VERSION}${TK_PATCH_LEVEL} needs Tcl ${TK_VERSION}. -Use --with-tcl= option to indicate location of tclConfig.sh file for Tcl ${TK_VERSION}." >&5 -echo "$as_me: error: ${TCL_BIN_DIR}/tclConfig.sh is for Tcl ${TCL_VERSION}. -Tk ${TK_VERSION}${TK_PATCH_LEVEL} needs Tcl ${TK_VERSION}. -Use --with-tcl= option to indicate location of tclConfig.sh file for Tcl ${TK_VERSION}." >&2;} - { (exit 1); exit 1; }; } -fi -if test "${TCL_MINOR_VERSION}" -lt "${TK_MINOR_VERSION}"; then - { { echo "$as_me:$LINENO: error: ${TCL_BIN_DIR}/tclConfig.sh is for Tcl ${TCL_VERSION}. -Tk ${TK_VERSION}${TK_PATCH_LEVEL} needs Tcl ${TK_VERSION}. -Use --with-tcl= option to indicate location of tclConfig.sh file for Tcl ${TK_VERSION}." >&5 -echo "$as_me: error: ${TCL_BIN_DIR}/tclConfig.sh is for Tcl ${TCL_VERSION}. -Tk ${TK_VERSION}${TK_PATCH_LEVEL} needs Tcl ${TK_VERSION}. -Use --with-tcl= option to indicate location of tclConfig.sh file for Tcl ${TK_VERSION}." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "${TCL_BIN_DIR}/tclConfig.sh is for Tcl ${TCL_VERSION}. +Tk ${TK_VERSION}${TK_PATCH_LEVEL} needs Tcl 8.6+. +Use --with-tcl= option to indicate location of tclConfig.sh file for Tcl 8.6 or better." "$LINENO" 5 +fi +if test "${TCL_MINOR_VERSION}" -lt 6; then + as_fn_error $? "${TCL_BIN_DIR}/tclConfig.sh is for Tcl ${TCL_VERSION}. +Tk ${TK_VERSION}${TK_PATCH_LEVEL} needs Tcl 8.6+. +Use --with-tcl= option to indicate location of tclConfig.sh file for Tcl 8.6 or better." "$LINENO" 5 fi #-------------------------------------------------------------------- @@ -3310,70 +3948,15 @@ fi #-------------------------------------------------------------------- # On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_Header=no" -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi @@ -3385,59 +3968,57 @@ done # Step 0: Enable 64 bit support? - echo "$as_me:$LINENO: checking if 64bit support is requested" >&5 -echo $ECHO_N "checking if 64bit support is requested... $ECHO_C" >&6 - # Check whether --enable-64bit or --disable-64bit was given. -if test "${enable_64bit+set}" = set; then - enableval="$enable_64bit" - do64bit=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if 64bit support is requested" >&5 +$as_echo_n "checking if 64bit support is requested... " >&6; } + # Check whether --enable-64bit was given. +if test "${enable_64bit+set}" = set; then : + enableval=$enable_64bit; do64bit=$enableval else do64bit=no -fi; - echo "$as_me:$LINENO: result: $do64bit" >&5 -echo "${ECHO_T}$do64bit" >&6 +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $do64bit" >&5 +$as_echo "$do64bit" >&6; } # Cross-compiling options for Windows/CE builds - echo "$as_me:$LINENO: checking if Windows/CE build is requested" >&5 -echo $ECHO_N "checking if Windows/CE build is requested... $ECHO_C" >&6 - # Check whether --enable-wince or --disable-wince was given. -if test "${enable_wince+set}" = set; then - enableval="$enable_wince" - doWince=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if Windows/CE build is requested" >&5 +$as_echo_n "checking if Windows/CE build is requested... " >&6; } + # Check whether --enable-wince was given. +if test "${enable_wince+set}" = set; then : + enableval=$enable_wince; doWince=$enableval else doWince=no -fi; - echo "$as_me:$LINENO: result: $doWince" >&5 -echo "${ECHO_T}$doWince" >&6 +fi - echo "$as_me:$LINENO: checking for Windows/CE celib directory" >&5 -echo $ECHO_N "checking for Windows/CE celib directory... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $doWince" >&5 +$as_echo "$doWince" >&6; } -# Check whether --with-celib or --without-celib was given. -if test "${with_celib+set}" = set; then - withval="$with_celib" - CELIB_DIR=$withval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Windows/CE celib directory" >&5 +$as_echo_n "checking for Windows/CE celib directory... " >&6; } + +# Check whether --with-celib was given. +if test "${with_celib+set}" = set; then : + withval=$with_celib; CELIB_DIR=$withval else CELIB_DIR=NO_CELIB -fi; - echo "$as_me:$LINENO: result: $CELIB_DIR" >&5 -echo "${ECHO_T}$CELIB_DIR" >&6 +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CELIB_DIR" >&5 +$as_echo "$CELIB_DIR" >&6; } # Set some defaults (may get changed below) EXTRA_CFLAGS="" -cat >>confdefs.h <<\_ACEOF -#define MODULE_SCOPE extern -_ACEOF +$as_echo "#define MODULE_SCOPE extern" >>confdefs.h # Extract the first word of "cygpath", so it can be a program name with args. set dummy cygpath; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CYGPATH+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CYGPATH+:} false; then : + $as_echo_n "(cached) " >&6 else if test -n "$CYGPATH"; then ac_cv_prog_CYGPATH="$CYGPATH" # Let the user override the test. @@ -3447,28 +4028,30 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CYGPATH="cygpath -m" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done +IFS=$as_save_IFS test -z "$ac_cv_prog_CYGPATH" && ac_cv_prog_CYGPATH="echo" fi fi CYGPATH=$ac_cv_prog_CYGPATH if test -n "$CYGPATH"; then - echo "$as_me:$LINENO: result: $CYGPATH" >&5 -echo "${ECHO_T}$CYGPATH" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5 +$as_echo "$CYGPATH" >&6; } else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi + SHLIB_SUFFIX=".dll" # MACHINE is IX86 for LINK, but this is used by the manifest, @@ -3477,16 +4060,12 @@ fi if test "$GCC" = "yes"; then - echo "$as_me:$LINENO: checking for cross-compile version of gcc" >&5 -echo $ECHO_N "checking for cross-compile version of gcc... $ECHO_C" >&6 -if test "${ac_cv_cross+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cross-compile version of gcc" >&5 +$as_echo_n "checking for cross-compile version of gcc... " >&6; } +if ${ac_cv_cross+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifndef _WIN32 @@ -3501,40 +4080,16 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_cross=no else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_cross=yes + ac_cv_cross=yes fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_cross" >&5 -echo "${ECHO_T}$ac_cv_cross" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cross" >&5 +$as_echo "$ac_cv_cross" >&6; } if test "$ac_cv_cross" = "yes"; then case "$do64bit" in @@ -3569,20 +4124,20 @@ echo "${ECHO_T}$ac_cv_cross" >&6 echo "101 \"name\"" >> $conftest echo "END" >> $conftest - echo "$as_me:$LINENO: checking for Windows native path bug in windres" >&5 -echo $ECHO_N "checking for Windows native path bug in windres... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Windows native path bug in windres" >&5 +$as_echo_n "checking for Windows native path bug in windres... " >&6; } cyg_conftest=`$CYGPATH $conftest` if { ac_try='$RC -o conftest.res.o $cyg_conftest' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5 (eval $ac_try) 2>&5 ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } ; then - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; } ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } else - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } CYGPATH=echo fi conftest= @@ -3600,16 +4155,12 @@ echo "${ECHO_T}yes" >&6 if test "${GCC}" = "yes" ; then extra_cflags="-pipe" extra_ldflags="-pipe -static-libgcc" - echo "$as_me:$LINENO: checking for mingw32 version of gcc" >&5 -echo $ECHO_N "checking for mingw32 version of gcc... $ECHO_C" >&6 -if test "${ac_cv_win32+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for mingw32 version of gcc" >&5 +$as_echo_n "checking for mingw32 version of gcc... " >&6; } +if ${ac_cv_win32+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef _WIN32 @@ -3624,57 +4175,73 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_win32=no else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_win32=yes + ac_cv_win32=yes fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_win32" >&5 -echo "${ECHO_T}$ac_cv_win32" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_win32" >&5 +$as_echo "$ac_cv_win32" >&6; } if test "$ac_cv_win32" != "yes"; then - { { echo "$as_me:$LINENO: error: ${CC} cannot produce win32 executables." >&5 -echo "$as_me: error: ${CC} cannot produce win32 executables." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "${CC} cannot produce win32 executables." "$LINENO" 5 fi hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -mwindows -municode -Dmain=xxmain" - echo "$as_me:$LINENO: checking for working -municode linker flag" >&5 -echo $ECHO_N "checking for working -municode linker flag... $ECHO_C" >&6 -if test "${ac_cv_municode+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working -municode linker flag" >&5 +$as_echo_n "checking for working -municode linker flag... " >&6; } +if ${ac_cv_municode+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include @@ -3688,41 +4255,17 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_municode=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_municode=no + ac_cv_municode=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_municode" >&5 -echo "${ECHO_T}$ac_cv_municode" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_municode" >&5 +$as_echo "$ac_cv_municode" >&6; } CFLAGS=$hold_cflags if test "$ac_cv_municode" = "yes" ; then extra_ldflags="$extra_ldflags -municode" @@ -3731,8 +4274,8 @@ echo "${ECHO_T}$ac_cv_municode" >&6 fi fi - echo "$as_me:$LINENO: checking compiler flags" >&5 -echo $ECHO_N "checking compiler flags... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking compiler flags" >&5 +$as_echo_n "checking compiler flags... " >&6; } if test "${GCC}" = "yes" ; then SHLIB_LD="" SHLIB_LD_LIBS='${LIBS}' @@ -3753,23 +4296,20 @@ echo $ECHO_N "checking compiler flags... $ECHO_C" >&6 if test "${SHARED_BUILD}" = "0" ; then # static - echo "$as_me:$LINENO: result: using static flags" >&5 -echo "${ECHO_T}using static flags" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: using static flags" >&5 +$as_echo "using static flags" >&6; } runtime= LIBRARIES="\${STATIC_LIBRARIES}" EXESUFFIX="s\${DBGX}.exe" else # dynamic - echo "$as_me:$LINENO: result: using shared flags" >&5 -echo "${ECHO_T}using shared flags" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: using shared flags" >&5 +$as_echo "using shared flags" >&6; } # ad-hoc check to see if CC supports -shared. if "${CC}" -shared 2>&1 | egrep ': -shared not supported' >/dev/null; then - { { echo "$as_me:$LINENO: error: ${CC} does not support the -shared option. - You will need to upgrade to a newer version of the toolchain." >&5 -echo "$as_me: error: ${CC} does not support the -shared option. - You will need to upgrade to a newer version of the toolchain." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "${CC} does not support the -shared option. + You will need to upgrade to a newer version of the toolchain." "$LINENO" 5 fi runtime= @@ -3823,20 +4363,16 @@ echo "$as_me: error: ${CC} does not support the -shared option. case "$do64bit" in amd64|x64|yes) MACHINE="AMD64" ; # assume AMD64 as default 64-bit build - echo "$as_me:$LINENO: result: Using 64-bit $MACHINE mode" >&5 -echo "${ECHO_T} Using 64-bit $MACHINE mode" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using 64-bit $MACHINE mode" >&5 +$as_echo " Using 64-bit $MACHINE mode" >&6; } ;; ia64) MACHINE="IA64" - echo "$as_me:$LINENO: result: Using 64-bit $MACHINE mode" >&5 -echo "${ECHO_T} Using 64-bit $MACHINE mode" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using 64-bit $MACHINE mode" >&5 +$as_echo " Using 64-bit $MACHINE mode" >&6; } ;; *) - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifndef _WIN64 @@ -3851,57 +4387,33 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_win_64bit=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_win_64bit=no + tcl_win_64bit=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test "$tcl_win_64bit" = "yes" ; then do64bit=amd64 MACHINE="AMD64" - echo "$as_me:$LINENO: result: Using 64-bit $MACHINE mode" >&5 -echo "${ECHO_T} Using 64-bit $MACHINE mode" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using 64-bit $MACHINE mode" >&5 +$as_echo " Using 64-bit $MACHINE mode" >&6; } fi ;; esac else if test "${SHARED_BUILD}" = "0" ; then # static - echo "$as_me:$LINENO: result: using static flags" >&5 -echo "${ECHO_T}using static flags" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: using static flags" >&5 +$as_echo "using static flags" >&6; } runtime=-MT LIBRARIES="\${STATIC_LIBRARIES}" EXESUFFIX="s\${DBGX}.exe" else # dynamic - echo "$as_me:$LINENO: result: using shared flags" >&5 -echo "${ECHO_T}using shared flags" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: using shared flags" >&5 +$as_echo "using shared flags" >&6; } runtime=-MD # Add SHLIB_LD_LIBS to the Make rule, not here. LIBRARIES="\${SHARED_LIBRARIES}" @@ -3941,11 +4453,11 @@ echo "${ECHO_T}using shared flags" >&6 ;; esac if test ! -d "${PATH64}" ; then - { echo "$as_me:$LINENO: WARNING: Could not find 64-bit $MACHINE SDK" >&5 -echo "$as_me: WARNING: Could not find 64-bit $MACHINE SDK" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Could not find 64-bit $MACHINE SDK" >&5 +$as_echo "$as_me: WARNING: Could not find 64-bit $MACHINE SDK" >&2;} fi - echo "$as_me:$LINENO: result: Using 64-bit $MACHINE mode" >&5 -echo "${ECHO_T} Using 64-bit $MACHINE mode" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using 64-bit $MACHINE mode" >&5 +$as_echo " Using 64-bit $MACHINE mode" >&6; } fi LIBS="netapi32.lib kernel32.lib user32.lib advapi32.lib userenv.lib ws2_32.lib" @@ -3964,64 +4476,9 @@ echo "${ECHO_T} Using 64-bit $MACHINE mode" >&6 # TEA_PATH_NOSPACE to avoid this issue. # Check if _WIN64 is already recognized, and if so we don't # need to modify CC. - echo "$as_me:$LINENO: checking whether _WIN64 is declared" >&5 -echo $ECHO_N "checking whether _WIN64 is declared... $ECHO_C" >&6 -if test "${ac_cv_have_decl__WIN64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -#ifndef _WIN64 - char *p = (char *) _WIN64; -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_have_decl__WIN64=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + ac_fn_c_check_decl "$LINENO" "_WIN64" "ac_cv_have_decl__WIN64" "$ac_includes_default" +if test "x$ac_cv_have_decl__WIN64" = xyes; then : -ac_cv_have_decl__WIN64=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_have_decl__WIN64" >&5 -echo "${ECHO_T}$ac_cv_have_decl__WIN64" >&6 -if test $ac_cv_have_decl__WIN64 = yes; then - : else CC="\"${PATH64}/cl.exe\" -I\"${MSSDK}/Include\" \ -I\"${MSSDK}/Include/crt\" \ @@ -4089,15 +4546,11 @@ fi SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` if test ! -d "${CELIB_DIR}/inc"; then - { { echo "$as_me:$LINENO: error: Invalid celib directory \"${CELIB_DIR}\"" >&5 -echo "$as_me: error: Invalid celib directory \"${CELIB_DIR}\"" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "Invalid celib directory \"${CELIB_DIR}\"" "$LINENO" 5 fi if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}"\ -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then - { { echo "$as_me:$LINENO: error: could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" >&5 -echo "$as_me: error: could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" "$LINENO" 5 else CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" if test -d "${CEINCLUDE}/${TARGETCPU}" ; then @@ -4193,26 +4646,20 @@ _ACEOF fi if test "$do64bit" != "no" ; then - cat >>confdefs.h <<\_ACEOF -#define TCL_CFG_DO64BIT 1 -_ACEOF + $as_echo "#define TCL_CFG_DO64BIT 1" >>confdefs.h fi if test "${GCC}" = "yes" ; then - echo "$as_me:$LINENO: checking for SEH support in compiler" >&5 -echo $ECHO_N "checking for SEH support in compiler... $ECHO_C" >&6 -if test "${tcl_cv_seh+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for SEH support in compiler" >&5 +$as_echo_n "checking for SEH support in compiler... " >&6; } +if ${tcl_cv_seh+:} false; then : + $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : tcl_cv_seh=no else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #define WIN32_LEAN_AND_MEAN @@ -4231,37 +4678,22 @@ cat >>conftest.$ac_ext <<_ACEOF } _ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : tcl_cv_seh=yes else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -tcl_cv_seh=no + tcl_cv_seh=no fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi + fi -echo "$as_me:$LINENO: result: $tcl_cv_seh" >&5 -echo "${ECHO_T}$tcl_cv_seh" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_seh" >&5 +$as_echo "$tcl_cv_seh" >&6; } if test "$tcl_cv_seh" = "no" ; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_NO_SEH 1 -_ACEOF +$as_echo "#define HAVE_NO_SEH 1" >>confdefs.h fi @@ -4271,16 +4703,12 @@ _ACEOF # with Cygwin's version as of 2002-04-10, define it to be int, # sufficient for getting the current code to work. # - echo "$as_me:$LINENO: checking for EXCEPTION_DISPOSITION support in include files" >&5 -echo $ECHO_N "checking for EXCEPTION_DISPOSITION support in include files... $ECHO_C" >&6 -if test "${tcl_cv_eh_disposition+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for EXCEPTION_DISPOSITION support in include files" >&5 +$as_echo_n "checking for EXCEPTION_DISPOSITION support in include files... " >&6; } +if ${tcl_cv_eh_disposition+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ # define WIN32_LEAN_AND_MEAN @@ -4297,45 +4725,19 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_eh_disposition=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_eh_disposition=no + tcl_cv_eh_disposition=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $tcl_cv_eh_disposition" >&5 -echo "${ECHO_T}$tcl_cv_eh_disposition" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_eh_disposition" >&5 +$as_echo "$tcl_cv_eh_disposition" >&6; } if test "$tcl_cv_eh_disposition" = "no" ; then -cat >>confdefs.h <<\_ACEOF -#define EXCEPTION_DISPOSITION int -_ACEOF +$as_echo "#define EXCEPTION_DISPOSITION int" >>confdefs.h fi @@ -4343,16 +4745,12 @@ _ACEOF # even if VOID has already been #defined. The win32api # used by mingw and cygwin is known to do this. - echo "$as_me:$LINENO: checking for winnt.h that ignores VOID define" >&5 -echo $ECHO_N "checking for winnt.h that ignores VOID define... $ECHO_C" >&6 -if test "${tcl_cv_winnt_ignore_void+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for winnt.h that ignores VOID define" >&5 +$as_echo_n "checking for winnt.h that ignores VOID define... " >&6; } +if ${tcl_cv_winnt_ignore_void+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #define VOID void @@ -4372,45 +4770,19 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_winnt_ignore_void=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_winnt_ignore_void=no + tcl_cv_winnt_ignore_void=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $tcl_cv_winnt_ignore_void" >&5 -echo "${ECHO_T}$tcl_cv_winnt_ignore_void" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_winnt_ignore_void" >&5 +$as_echo "$tcl_cv_winnt_ignore_void" >&6; } if test "$tcl_cv_winnt_ignore_void" = "yes" ; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_WINNT_IGNORE_VOID 1 -_ACEOF +$as_echo "#define HAVE_WINNT_IGNORE_VOID 1" >>confdefs.h fi @@ -4418,16 +4790,12 @@ _ACEOF # This is used to stop gcc from printing a compiler # warning when initializing a union member. - echo "$as_me:$LINENO: checking for cast to union support" >&5 -echo $ECHO_N "checking for cast to union support... $ECHO_C" >&6 -if test "${tcl_cv_cast_to_union+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cast to union support" >&5 +$as_echo_n "checking for cast to union support... " >&6; } +if ${tcl_cv_cast_to_union+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -4441,45 +4809,19 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_compile "$LINENO"; then : tcl_cv_cast_to_union=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cast_to_union=no + tcl_cv_cast_to_union=no fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $tcl_cv_cast_to_union" >&5 -echo "${ECHO_T}$tcl_cv_cast_to_union" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_cast_to_union" >&5 +$as_echo "$tcl_cv_cast_to_union" >&6; } if test "$tcl_cv_cast_to_union" = "yes"; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_CAST_TO_UNION 1 -_ACEOF +$as_echo "#define HAVE_CAST_TO_UNION 1" >>confdefs.h fi fi @@ -4495,145 +4837,9 @@ _ACEOF # man2tcl needs this so that it can use errno.h #-------------------------------------------------------------------- -if test "${ac_cv_header_errno_h+set}" = set; then - echo "$as_me:$LINENO: checking for errno.h" >&5 -echo $ECHO_N "checking for errno.h... $ECHO_C" >&6 -if test "${ac_cv_header_errno_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_errno_h" >&5 -echo "${ECHO_T}$ac_cv_header_errno_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking errno.h usability" >&5 -echo $ECHO_N "checking errno.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking errno.h presence" >&5 -echo $ECHO_N "checking errno.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: errno.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: errno.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: errno.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: errno.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: errno.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: errno.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: errno.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: errno.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: errno.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: errno.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: errno.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: errno.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: errno.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: errno.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: errno.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for errno.h" >&5 -echo $ECHO_N "checking for errno.h... $ECHO_C" >&6 -if test "${ac_cv_header_errno_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_errno_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_errno_h" >&5 -echo "${ECHO_T}$ac_cv_header_errno_h" >&6 +ac_fn_c_check_header_mongrel "$LINENO" "errno.h" "ac_cv_header_errno_h" "$ac_includes_default" +if test "x$ac_cv_header_errno_h" = xyes; then : -fi -if test $ac_cv_header_errno_h = yes; then - : else MAN2TCLFLAGS="-DNO_ERRNO_H" fi @@ -4645,17 +4851,13 @@ fi # Check for _strtoi64 #------------------------------------------- -echo "$as_me:$LINENO: checking availability of _strtoi64" >&5 -echo $ECHO_N "checking availability of _strtoi64... $ECHO_C" >&6 -if test "${tcl_cv_strtoi64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking availability of _strtoi64" >&5 +$as_echo_n "checking availability of _strtoi64... " >&6; } +if ${tcl_cv_strtoi64+:} false; then : + $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int @@ -4666,45 +4868,19 @@ _strtoi64(0,0,0) return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_link "$LINENO"; then : tcl_cv_strtoi64=yes else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_strtoi64=no + tcl_cv_strtoi64=no fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $tcl_cv_strtoi64" >&5 -echo "${ECHO_T}$tcl_cv_strtoi64" >&6 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $tcl_cv_strtoi64" >&5 +$as_echo "$tcl_cv_strtoi64" >&6; } if test $tcl_cv_strtoi64 = no; then -cat >>confdefs.h <<\_ACEOF -#define NO_STRTOI64 1 -_ACEOF +$as_echo "#define NO_STRTOI64 1" >>confdefs.h fi @@ -4712,163 +4888,63 @@ fi # Windows XP theme engine header for Ttk #-------------------------------------------------------------------- -echo "$as_me:$LINENO: checking for uxtheme.h" >&5 -echo $ECHO_N "checking for uxtheme.h... $ECHO_C" >&6 -if test "${ac_cv_header_uxtheme_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +ac_fn_c_check_header_compile "$LINENO" "uxtheme.h" "ac_cv_header_uxtheme_h" "#include +" +if test "x$ac_cv_header_uxtheme_h" = xyes; then : + $as_echo "#define HAVE_UXTHEME_H 1" >>confdefs.h + else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include + { $as_echo "$as_me:${as_lineno-$LINENO}: xpnative theme will be unavailable" >&5 +$as_echo "$as_me: xpnative theme will be unavailable" >&6;} +fi + +ac_fn_c_check_header_compile "$LINENO" "vssym32.h" "ac_cv_header_vssym32_h" "#include #include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_uxtheme_h=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +" +if test "x$ac_cv_header_vssym32_h" = xyes; then : + $as_echo "#define HAVE_VSSYM32_H 1" >>confdefs.h -ac_cv_header_uxtheme_h=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$as_me:$LINENO: result: $ac_cv_header_uxtheme_h" >&5 -echo "${ECHO_T}$ac_cv_header_uxtheme_h" >&6 -if test $ac_cv_header_uxtheme_h = yes; then - cat >>confdefs.h <<\_ACEOF -#define HAVE_UXTHEME_H 1 -_ACEOF -else - { echo "$as_me:$LINENO: xpnative theme will be unavailable" >&5 -echo "$as_me: xpnative theme will be unavailable" >&6;} -fi -echo "$as_me:$LINENO: checking for vssym32.h" >&5 -echo $ECHO_N "checking for vssym32.h... $ECHO_C" >&6 -if test "${ac_cv_header_vssym32_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 +#-------------------------------------------------------------------- +# Set the default compiler switches based on the --enable-symbols +# option. This macro depends on C flags, and should be called +# after SC_CONFIG_CFLAGS macro is called. +#-------------------------------------------------------------------- + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for build with symbols" >&5 +$as_echo_n "checking for build with symbols... " >&6; } + # Check whether --enable-symbols was given. +if test "${enable_symbols+set}" = set; then : + enableval=$enable_symbols; tcl_ok=$enableval else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include - -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_vssym32_h=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_vssym32_h=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_header_vssym32_h" >&5 -echo "${ECHO_T}$ac_cv_header_vssym32_h" >&6 -if test $ac_cv_header_vssym32_h = yes; then - cat >>confdefs.h <<\_ACEOF -#define HAVE_VSSYM32_H 1 -_ACEOF - + tcl_ok=no fi - - -#-------------------------------------------------------------------- -# Set the default compiler switches based on the --enable-symbols -# option. This macro depends on C flags, and should be called -# after SC_CONFIG_CFLAGS macro is called. -#-------------------------------------------------------------------- - - - echo "$as_me:$LINENO: checking for build with symbols" >&5 -echo $ECHO_N "checking for build with symbols... $ECHO_C" >&6 - # Check whether --enable-symbols or --disable-symbols was given. -if test "${enable_symbols+set}" = set; then - enableval="$enable_symbols" - tcl_ok=$enableval -else - tcl_ok=no -fi; # FIXME: Currently, LDFLAGS_DEFAULT is not used, it should work like CFLAGS_DEFAULT. if test "$tcl_ok" = "no"; then CFLAGS_DEFAULT='$(CFLAGS_OPTIMIZE)' LDFLAGS_DEFAULT='$(LDFLAGS_OPTIMIZE)' DBGX="" -cat >>confdefs.h <<\_ACEOF -#define NDEBUG 1 -_ACEOF +$as_echo "#define NDEBUG 1" >>confdefs.h - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } - cat >>confdefs.h <<\_ACEOF -#define TCL_CFG_OPTIMIZED 1 -_ACEOF + $as_echo "#define TCL_CFG_OPTIMIZED 1" >>confdefs.h else CFLAGS_DEFAULT='$(CFLAGS_DEBUG)' LDFLAGS_DEFAULT='$(LDFLAGS_DEBUG)' DBGX=g if test "$tcl_ok" = "yes"; then - echo "$as_me:$LINENO: result: yes (standard debugging)" >&5 -echo "${ECHO_T}yes (standard debugging)" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes (standard debugging)" >&5 +$as_echo "yes (standard debugging)" >&6; } fi fi @@ -4876,32 +4952,26 @@ echo "${ECHO_T}yes (standard debugging)" >&6 if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then -cat >>confdefs.h <<\_ACEOF -#define TCL_MEM_DEBUG 1 -_ACEOF +$as_echo "#define TCL_MEM_DEBUG 1" >>confdefs.h fi if test "$tcl_ok" = "compile" -o "$tcl_ok" = "all"; then -cat >>confdefs.h <<\_ACEOF -#define TCL_COMPILE_DEBUG 1 -_ACEOF +$as_echo "#define TCL_COMPILE_DEBUG 1" >>confdefs.h -cat >>confdefs.h <<\_ACEOF -#define TCL_COMPILE_STATS 1 -_ACEOF +$as_echo "#define TCL_COMPILE_STATS 1" >>confdefs.h fi if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then if test "$tcl_ok" = "all"; then - echo "$as_me:$LINENO: result: enabled symbols mem compile debugging" >&5 -echo "${ECHO_T}enabled symbols mem compile debugging" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: enabled symbols mem compile debugging" >&5 +$as_echo "enabled symbols mem compile debugging" >&6; } else - echo "$as_me:$LINENO: result: enabled $tcl_ok debugging" >&5 -echo "${ECHO_T}enabled $tcl_ok debugging" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: enabled $tcl_ok debugging" >&5 +$as_echo "enabled $tcl_ok debugging" >&6; } fi fi @@ -4913,15 +4983,15 @@ TK_DBGX=${DBGX} #-------------------------------------------------------------------- - echo "$as_me:$LINENO: checking whether to embed manifest" >&5 -echo $ECHO_N "checking whether to embed manifest... $ECHO_C" >&6 - # Check whether --enable-embedded-manifest or --disable-embedded-manifest was given. -if test "${enable_embedded_manifest+set}" = set; then - enableval="$enable_embedded_manifest" - embed_ok=$enableval + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to embed manifest" >&5 +$as_echo_n "checking whether to embed manifest... " >&6; } + # Check whether --enable-embedded-manifest was given. +if test "${enable_embedded_manifest+set}" = set; then : + enableval=$enable_embedded_manifest; embed_ok=$enableval else embed_ok=yes -fi; +fi + VC_MANIFEST_EMBED_DLL= VC_MANIFEST_EMBED_EXE= @@ -4929,11 +4999,7 @@ fi; if test "$embed_ok" = "yes" -a "${SHARED_BUILD}" = "1" \ -a "$GCC" != "yes" ; then # Add the magic to embed the manifest into the dll/exe - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #if defined(_MSC_VER) && _MSC_VER >= 1400 @@ -4942,7 +5008,7 @@ print("manifest needed") _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "manifest needed" >/dev/null 2>&1; then + $EGREP "manifest needed" >/dev/null 2>&1; then : # Could do a CHECK_PROG for mt, but should always be with MSVC8+ # Could add 'if test -f' check, but manifest should be created @@ -4961,26 +5027,26 @@ fi rm -f conftest* fi - echo "$as_me:$LINENO: result: $result" >&5 -echo "${ECHO_T}$result" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $result" >&5 +$as_echo "$result" >&6; } - echo "$as_me:$LINENO: checking for tclsh in Tcl build directory" >&5 -echo $ECHO_N "checking for tclsh in Tcl build directory... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tclsh in Tcl build directory" >&5 +$as_echo_n "checking for tclsh in Tcl build directory... " >&6; } BUILD_TCLSH=${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT} - echo "$as_me:$LINENO: result: $BUILD_TCLSH" >&5 -echo "${ECHO_T}$BUILD_TCLSH" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_TCLSH" >&5 +$as_echo "$BUILD_TCLSH" >&6; } - echo "$as_me:$LINENO: checking for tclsh" >&5 -echo $ECHO_N "checking for tclsh... $ECHO_C" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tclsh" >&5 +$as_echo_n "checking for tclsh... " >&6; } - if test "${ac_cv_path_tclsh+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 + if ${ac_cv_path_tclsh+:} false; then : + $as_echo_n "(cached) " >&6 else search_path=`echo ${PATH} | sed -e 's/:/ /g'` @@ -5001,13 +5067,13 @@ fi if test -f "$ac_cv_path_tclsh" ; then TCLSH_PROG="$ac_cv_path_tclsh" - echo "$as_me:$LINENO: result: $TCLSH_PROG" >&5 -echo "${ECHO_T}$TCLSH_PROG" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TCLSH_PROG" >&5 +$as_echo "$TCLSH_PROG" >&6; } else # It is not an error if an installed version of Tcl can't be located. TCLSH_PROG="" - echo "$as_me:$LINENO: result: No tclsh found on PATH" >&5 -echo "${ECHO_T}No tclsh found on PATH" >&6 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: No tclsh found on PATH" >&5 +$as_echo "No tclsh found on PATH" >&6; } fi @@ -5170,7 +5236,8 @@ TK_WIN_VERSION="$TK_VERSION.$TK_RELEASE_LEVEL.`echo $TK_PATCH_LEVEL | tr -d ab.` - ac_config_files="$ac_config_files Makefile tkConfig.sh wish.exe.manifest" +ac_config_files="$ac_config_files Makefile tkConfig.sh wish.exe.manifest" + cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure @@ -5189,39 +5256,70 @@ _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. +# So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. -{ +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; + ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; - esac; -} | + esac | + sort +) | sed ' + /^ac_cv_env_/b end t clear - : clear + :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi else - echo "not updating unwritable cache $cache_file" + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache @@ -5230,63 +5328,55 @@ test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. # # If the first sed substitution is executed (which looks for macros that -# take arguments), then we branch to the quote section. Otherwise, +# take arguments), then branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. -cat >confdef2opt.sed <<\_ACEOF +ac_script=' +:mline +/\\$/{ + N + s,\\\n,, + b mline +} t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g t quote -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g t quote -d -: quote -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g -s,\[,\\&,g -s,\],\\&,g -s,\$,$$,g -p -_ACEOF -# We use echo to avoid assuming a particular line-breaking character. -# The extra dot is to prevent the shell from consuming trailing -# line-breaks from the sub-command output. A line-break within -# single-quotes doesn't work because, if this script is created in a -# platform that uses two characters for line-breaks (e.g., DOS), tr -# would break. -ac_LF_and_DOT=`echo; echo .` -DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` -rm -f confdef2opt.sed +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` ac_libobjs= ac_ltlibobjs= +U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs @@ -5294,12 +5384,14 @@ LTLIBOBJS=$ac_ltlibobjs -: ${CONFIG_STATUS=./config.status} +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. @@ -5309,81 +5401,253 @@ cat >$CONFIG_STATUS <<_ACEOF debug=false ac_cs_recheck=false ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi -DUALCASE=1; export DUALCASE # for MKS sh -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' fi +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi -done + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -# Name of the executable. -as_me=`$as_basename "$0" || +as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` -# PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' @@ -5391,148 +5655,111 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file else - as_expr=false + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi -rm -f conf$$ conf$$.exe conf$$.file +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi -as_executable_p="test -f" + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -5541,31 +5768,20 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - exec 6>&1 - -# Open the log real soon, to keep \$[0] and so on meaningful, and to +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - +# values after options handling. +ac_log=" This file was extended by $as_me, which was -generated by GNU Autoconf 2.59. Invocation command line was +generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -5573,124 +5789,116 @@ generated by GNU Autoconf 2.59. Invocation command line was CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + _ACEOF -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" -cat >>$CONFIG_STATUS <<\_ACEOF +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. -Usage: $0 [OPTIONS] [FILE]... +Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE Configuration files: $config_files -Report bugs to ." -_ACEOF +Report bugs to the package provider." -cat >>$CONFIG_STATUS <<_ACEOF +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ config.status -configured by $0, generated by GNU Autoconf 2.59, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" -Copyright (C) 2003 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +test -n "\$AWK" || AWK=awk _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in - --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= ac_shift=: ;; - -*) + *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; esac case $ac_option in # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; - *) ac_config_targets="$ac_config_targets $1" ;; + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; esac shift @@ -5704,32 +5912,46 @@ if $ac_cs_silent; then fi _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" fi _ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - - -cat >>$CONFIG_STATUS <<\_ACEOF +# Handling of arguments. for ac_config_target in $ac_config_targets do - case "$ac_config_target" in - # Handling of arguments. - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "tkConfig.sh" ) CONFIG_FILES="$CONFIG_FILES tkConfig.sh" ;; - "wish.exe.manifest" ) CONFIG_FILES="$CONFIG_FILES wish.exe.manifest" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; + case $ac_config_target in + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "tkConfig.sh") CONFIG_FILES="$CONFIG_FILES tkConfig.sh" ;; + "wish.exe.manifest") CONFIG_FILES="$CONFIG_FILES wish.exe.manifest" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done + # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely @@ -5739,418 +5961,414 @@ if $ac_need_defaults; then fi # Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, +# simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. $debug || { - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 } - # Create a (secure) tmp directory for tmp files. { - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" } || { - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) -} || + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} { - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi -# -# CONFIG_FILES section. -# +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@CPP@,$CPP,;t t -s,@EGREP@,$EGREP,;t t -s,@AR@,$AR,;t t -s,@ac_ct_AR@,$ac_ct_AR,;t t -s,@RANLIB@,$RANLIB,;t t -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@RC@,$RC,;t t -s,@ac_ct_RC@,$ac_ct_RC,;t t -s,@SET_MAKE@,$SET_MAKE,;t t -s,@TCL_THREADS@,$TCL_THREADS,;t t -s,@TCL_VERSION@,$TCL_VERSION,;t t -s,@TCL_BIN_DIR@,$TCL_BIN_DIR,;t t -s,@TCL_SRC_DIR@,$TCL_SRC_DIR,;t t -s,@TCL_LIB_FILE@,$TCL_LIB_FILE,;t t -s,@TCL_LIB_FLAG@,$TCL_LIB_FLAG,;t t -s,@TCL_LIB_SPEC@,$TCL_LIB_SPEC,;t t -s,@TCL_STUB_LIB_FILE@,$TCL_STUB_LIB_FILE,;t t -s,@TCL_STUB_LIB_FLAG@,$TCL_STUB_LIB_FLAG,;t t -s,@TCL_STUB_LIB_SPEC@,$TCL_STUB_LIB_SPEC,;t t -s,@TCL_DEFS@,$TCL_DEFS,;t t -s,@CYGPATH@,$CYGPATH,;t t -s,@CELIB_DIR@,$CELIB_DIR,;t t -s,@DL_LIBS@,$DL_LIBS,;t t -s,@CFLAGS_DEBUG@,$CFLAGS_DEBUG,;t t -s,@CFLAGS_OPTIMIZE@,$CFLAGS_OPTIMIZE,;t t -s,@CFLAGS_WARNING@,$CFLAGS_WARNING,;t t -s,@MAN2TCLFLAGS@,$MAN2TCLFLAGS,;t t -s,@CFLAGS_DEFAULT@,$CFLAGS_DEFAULT,;t t -s,@LDFLAGS_DEFAULT@,$LDFLAGS_DEFAULT,;t t -s,@VC_MANIFEST_EMBED_DLL@,$VC_MANIFEST_EMBED_DLL,;t t -s,@VC_MANIFEST_EMBED_EXE@,$VC_MANIFEST_EMBED_EXE,;t t -s,@BUILD_TCLSH@,$BUILD_TCLSH,;t t -s,@TCLSH_PROG@,$TCLSH_PROG,;t t -s,@TK_WIN_VERSION@,$TK_WIN_VERSION,;t t -s,@MACHINE@,$MACHINE,;t t -s,@TK_VERSION@,$TK_VERSION,;t t -s,@TK_MAJOR_VERSION@,$TK_MAJOR_VERSION,;t t -s,@TK_MINOR_VERSION@,$TK_MINOR_VERSION,;t t -s,@TK_PATCH_LEVEL@,$TK_PATCH_LEVEL,;t t -s,@TK_DBGX@,$TK_DBGX,;t t -s,@TK_LIB_FILE@,$TK_LIB_FILE,;t t -s,@TK_DLL_FILE@,$TK_DLL_FILE,;t t -s,@TK_STUB_LIB_FILE@,$TK_STUB_LIB_FILE,;t t -s,@TK_STUB_LIB_FLAG@,$TK_STUB_LIB_FLAG,;t t -s,@TK_BUILD_STUB_LIB_SPEC@,$TK_BUILD_STUB_LIB_SPEC,;t t -s,@TK_SRC_DIR@,$TK_SRC_DIR,;t t -s,@TK_BIN_DIR@,$TK_BIN_DIR,;t t -s,@TCL_MAJOR_VERSION@,$TCL_MAJOR_VERSION,;t t -s,@TCL_MINOR_VERSION@,$TCL_MINOR_VERSION,;t t -s,@TCL_PATCH_LEVEL@,$TCL_PATCH_LEVEL,;t t -s,@TCL_DBGX@,$TCL_DBGX,;t t -s,@CFG_TK_SHARED_LIB_SUFFIX@,$CFG_TK_SHARED_LIB_SUFFIX,;t t -s,@CFG_TK_UNSHARED_LIB_SUFFIX@,$CFG_TK_UNSHARED_LIB_SUFFIX,;t t -s,@CFG_TK_EXPORT_FILE_SUFFIX@,$CFG_TK_EXPORT_FILE_SUFFIX,;t t -s,@EXTRA_CFLAGS@,$EXTRA_CFLAGS,;t t -s,@DEPARG@,$DEPARG,;t t -s,@CC_OBJNAME@,$CC_OBJNAME,;t t -s,@CC_EXENAME@,$CC_EXENAME,;t t -s,@LDFLAGS_DEBUG@,$LDFLAGS_DEBUG,;t t -s,@LDFLAGS_OPTIMIZE@,$LDFLAGS_OPTIMIZE,;t t -s,@LDFLAGS_CONSOLE@,$LDFLAGS_CONSOLE,;t t -s,@LDFLAGS_WINDOW@,$LDFLAGS_WINDOW,;t t -s,@TK_RES@,$TK_RES,;t t -s,@STLIB_LD@,$STLIB_LD,;t t -s,@SHLIB_LD@,$SHLIB_LD,;t t -s,@SHLIB_LD_LIBS@,$SHLIB_LD_LIBS,;t t -s,@SHLIB_CFLAGS@,$SHLIB_CFLAGS,;t t -s,@SHLIB_SUFFIX@,$SHLIB_SUFFIX,;t t -s,@TK_SHARED_BUILD@,$TK_SHARED_BUILD,;t t -s,@LIBS_GUI@,$LIBS_GUI,;t t -s,@DLLSUFFIX@,$DLLSUFFIX,;t t -s,@LIBPREFIX@,$LIBPREFIX,;t t -s,@LIBSUFFIX@,$LIBSUFFIX,;t t -s,@EXESUFFIX@,$EXESUFFIX,;t t -s,@LIBRARIES@,$LIBRARIES,;t t -s,@MAKE_LIB@,$MAKE_LIB,;t t -s,@MAKE_STUB_LIB@,$MAKE_STUB_LIB,;t t -s,@POST_MAKE_LIB@,$POST_MAKE_LIB,;t t -s,@MAKE_DLL@,$MAKE_DLL,;t t -s,@MAKE_EXE@,$MAKE_EXE,;t t -s,@TK_LIB_FLAG@,$TK_LIB_FLAG,;t t -s,@TK_LIB_SPEC@,$TK_LIB_SPEC,;t t -s,@TK_BUILD_LIB_SPEC@,$TK_BUILD_LIB_SPEC,;t t -s,@TK_STUB_LIB_SPEC@,$TK_STUB_LIB_SPEC,;t t -s,@TK_STUB_LIB_PATH@,$TK_STUB_LIB_PATH,;t t -s,@TK_BUILD_STUB_LIB_PATH@,$TK_BUILD_STUB_LIB_PATH,;t t -s,@TK_CC_SEARCH_FLAGS@,$TK_CC_SEARCH_FLAGS,;t t -s,@TK_LD_SEARCH_FLAGS@,$TK_LD_SEARCH_FLAGS,;t t -s,@RC_OUT@,$RC_OUT,;t t -s,@RC_TYPE@,$RC_TYPE,;t t -s,@RC_INCLUDE@,$RC_INCLUDE,;t t -s,@RC_DEFINE@,$RC_DEFINE,;t t -s,@RC_DEFINES@,$RC_DEFINES,;t t -s,@RES@,$RES,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF -_ACEOF +eval set X " :F $CONFIG_FILES " +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat - fi -fi # test -n "$CONFIG_FILES" + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; esac - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || + ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix case $srcdir in - .) # No --srcdir option. We are building in place. + .) # We are building in place. ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac + case $ac_mode in + :F) + # + # CONFIG_FILE + # +_ACEOF - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac _ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub $extrasub _ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF + esac + +done # for ac_tag + -{ (exit 0); exit 0; } +as_fn_exit 0 _ACEOF -chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. @@ -6170,7 +6388,11 @@ if test "$no_create" != yes; then exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi diff --git a/win/configure.in b/win/configure.in index 0ff9304..cdef517 100644 --- a/win/configure.in +++ b/win/configure.in @@ -4,17 +4,17 @@ # to configure the system for the local environment. AC_INIT(../generic/tk.h) -AC_PREREQ(2.59) +AC_PREREQ(2.69) # The following define is needed when building with Cygwin since newer # versions of autoconf incorrectly set SHELL to /bin/bash instead of # /bin/sh. The bash shell seems to suffer from some strange failures. SHELL=/bin/sh -TK_VERSION=8.6 +TK_VERSION=8.7 TK_MAJOR_VERSION=8 -TK_MINOR_VERSION=6 -TK_PATCH_LEVEL=".5" +TK_MINOR_VERSION=7 +TK_PATCH_LEVEL="a0" VER=$TK_MAJOR_VERSION$TK_MINOR_VERSION #------------------------------------------------------------------------ @@ -83,13 +83,13 @@ SC_LOAD_TCLCONFIG if test "${TCL_MAJOR_VERSION}" != "${TK_MAJOR_VERSION}"; then AC_MSG_ERROR([${TCL_BIN_DIR}/tclConfig.sh is for Tcl ${TCL_VERSION}. -Tk ${TK_VERSION}${TK_PATCH_LEVEL} needs Tcl ${TK_VERSION}. -Use --with-tcl= option to indicate location of tclConfig.sh file for Tcl ${TK_VERSION}.]) +Tk ${TK_VERSION}${TK_PATCH_LEVEL} needs Tcl 8.6+. +Use --with-tcl= option to indicate location of tclConfig.sh file for Tcl 8.6 or better.]) fi -if test "${TCL_MINOR_VERSION}" -lt "${TK_MINOR_VERSION}"; then +if test "${TCL_MINOR_VERSION}" -lt 6; then AC_MSG_ERROR([${TCL_BIN_DIR}/tclConfig.sh is for Tcl ${TCL_VERSION}. -Tk ${TK_VERSION}${TK_PATCH_LEVEL} needs Tcl ${TK_VERSION}. -Use --with-tcl= option to indicate location of tclConfig.sh file for Tcl ${TK_VERSION}.]) +Tk ${TK_VERSION}${TK_PATCH_LEVEL} needs Tcl 8.6+. +Use --with-tcl= option to indicate location of tclConfig.sh file for Tcl 8.6 or better.]) fi #-------------------------------------------------------------------- diff --git a/win/tcl.m4 b/win/tcl.m4 index 84f0dff..c95d61f 100644 --- a/win/tcl.m4 +++ b/win/tcl.m4 @@ -1126,13 +1126,13 @@ AC_DEFUN([SC_CONFIG_CFLAGS], [ #------------------------------------------------------------------------ AC_DEFUN([SC_WITH_TCL], [ - if test -d ../../tcl8.6$1/win; then - TCL_BIN_DEFAULT=../../tcl8.6$1/win + if test -d ../../tcl8.7$1/win; then + TCL_BIN_DEFAULT=../../tcl8.7$1/win else - TCL_BIN_DEFAULT=../../tcl8.6/win + TCL_BIN_DEFAULT=../../tcl8.7/win fi - AC_ARG_WITH(tcl, [ --with-tcl=DIR use Tcl 8.6 binaries from DIR], + AC_ARG_WITH(tcl, [ --with-tcl=DIR use Tcl 8.6+ binaries from DIR], TCL_BIN_DIR=$withval, TCL_BIN_DIR=`cd $TCL_BIN_DEFAULT; pwd`) if test ! -d $TCL_BIN_DIR; then AC_MSG_ERROR(Tcl directory $TCL_BIN_DIR does not exist) -- cgit v0.12 From a3144fa34bae1c9c547f062981b181eb669f366e Mon Sep 17 00:00:00 2001 From: "jan.nijtmans" Date: Mon, 7 Mar 2016 08:45:47 +0000 Subject: Fix version number in .project file --- .project | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.project b/.project index 1a176fb..cc5f605 100644 --- a/.project +++ b/.project @@ -1,6 +1,6 @@ - tk8.6 + tk8.7 -- cgit v0.12 From 28e313537b9168d97ff8c7110d418caa64510588 Mon Sep 17 00:00:00 2001 From: dgp Date: Tue, 8 Mar 2016 15:59:26 +0000 Subject: Revise trunk to an explicit requirement on Tcl 8.6.0 so that Tcl 8.6 interps can make use of Tk 8.7 until such time as it stops supporting them. --- win/makefile.vc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/win/makefile.vc b/win/makefile.vc index ae43eb6..6f61327 100644 --- a/win/makefile.vc +++ b/win/makefile.vc @@ -961,7 +961,7 @@ install-binaries: !if !$(STATIC_BUILD) @echo creating package index @type << > $(OUT_DIR)\pkgIndex.tcl -if {[catch {package present Tcl $(TCL_PATCH_LEVEL)}]} { return } +if {[catch {package present Tcl 8.6.0}]} { return } if {($$::tcl_platform(platform) eq "unix") && ([info exists ::env(DISPLAY)] || ([info exists ::argv] && ("-display" in $$::argv)))} { package ifneeded Tk $(TK_PATCH_LEVEL) [list load [file join $$dir .. .. bin libtk$(TK_DOTVERSION).dll] Tk] -- cgit v0.12 From f2fb209ab9e06ac83800d3447a3bfb2c55dedfad Mon Sep 17 00:00:00 2001 From: fvogel Date: Thu, 10 Mar 2016 07:22:18 +0000 Subject: Fixed bug [d95e5d8f16] - Hidden panes in panedwindow incorrectly trigger events, patch from Brian Griffin --- generic/tkPanedWindow.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/generic/tkPanedWindow.c b/generic/tkPanedWindow.c index 2451647..f350d0a 100644 --- a/generic/tkPanedWindow.c +++ b/generic/tkPanedWindow.c @@ -1370,11 +1370,15 @@ PanedWindowEventProc( DestroyPanedWindow(pwPtr); } else if (eventPtr->type == UnmapNotify) { for (i = 0; i < pwPtr->numSlaves; i++) { - Tk_UnmapWindow(pwPtr->slaves[i]->tkwin); + if (!pwPtr->slaves[i]->hide) { + Tk_UnmapWindow(pwPtr->slaves[i]->tkwin); + } } } else if (eventPtr->type == MapNotify) { for (i = 0; i < pwPtr->numSlaves; i++) { - Tk_MapWindow(pwPtr->slaves[i]->tkwin); + if (!pwPtr->slaves[i]->hide) { + Tk_MapWindow(pwPtr->slaves[i]->tkwin); + } } } } -- cgit v0.12 From 8050dd21ddf8c44be1f77611525ccba21ba839b7 Mon Sep 17 00:00:00 2001 From: "jan.nijtmans" Date: Thu, 10 Mar 2016 14:20:42 +0000 Subject: Remove excess spacing in various library files. --- doc/tk4.0.ps | 550 ++++++++++++++++++++++---------------------- library/images/logo.eps | 10 +- library/images/pwrdLogo.eps | 10 +- library/ttk/button.tcl | 2 +- library/ttk/clamTheme.tcl | 2 +- library/ttk/defaults.tcl | 2 +- library/ttk/entry.tcl | 4 +- library/ttk/menubutton.tcl | 14 +- library/ttk/notebook.tcl | 10 +- library/ttk/scrollbar.tcl | 2 +- library/ttk/treeview.tcl | 2 +- library/ttk/ttk.tcl | 2 +- library/ttk/vistaTheme.tcl | 10 +- 13 files changed, 310 insertions(+), 310 deletions(-) diff --git a/doc/tk4.0.ps b/doc/tk4.0.ps index d79642d..5b71d92 100644 --- a/doc/tk4.0.ps +++ b/doc/tk4.0.ps @@ -16,7 +16,7 @@ % % Known Problems: % Due to bugs in Transcript, the 'PS-Adobe-' is omitted from line 1 -/FMversion (3.0) def +/FMversion (3.0) def % Set up Color vs. Black-and-White /FMPrintInColor { % once-thru loop gimmick @@ -38,34 +38,34 @@ exit } loop def % Uncomment the following line to force b&w on color printer % /FMPrintInColor false def -/FrameDict 195 dict def +/FrameDict 195 dict def systemdict /errordict known not {/errordict 10 dict def errordict /rangecheck {stop} put} if % The readline in 23.0 doesn't recognize cr's as nl's on AppleTalk -FrameDict /tmprangecheck errordict /rangecheck get put -errordict /rangecheck {FrameDict /bug true put} put -FrameDict /bug false put -mark +FrameDict /tmprangecheck errordict /rangecheck get put +errordict /rangecheck {FrameDict /bug true put} put +FrameDict /bug false put +mark % Some PS machines read past the CR, so keep the following 3 lines together! currentfile 5 string readline 00 0000000000 -cleartomark -errordict /rangecheck FrameDict /tmprangecheck get put -FrameDict /bug get { +cleartomark +errordict /rangecheck FrameDict /tmprangecheck get put +FrameDict /bug get { /readline { /gstring exch def /gfile exch def /gindex 0 def { - gfile read pop - dup 10 eq {exit} if - dup 13 eq {exit} if - gstring exch gindex exch put - /gindex gindex 1 add def + gfile read pop + dup 10 eq {exit} if + dup 13 eq {exit} if + gstring exch gindex exch put + /gindex gindex 1 add def } loop - pop - gstring 0 gindex getinterval true + pop + gstring 0 gindex getinterval true } def } if /FMVERSION { @@ -76,12 +76,12 @@ FrameDict /bug get { dup = show showpage } if - } def + } def /FMLOCAL { FrameDict begin - 0 def - end - } def + 0 def + end + } def /gstring FMLOCAL /gfile FMLOCAL /gindex FMLOCAL @@ -94,8 +94,8 @@ FrameDict /bug get { /manualfeed FMLOCAL /paperheight FMLOCAL /paperwidth FMLOCAL -/FMDOCUMENT { - array /FMfonts exch def +/FMDOCUMENT { + array /FMfonts exch def /#copies exch def FrameDict begin 0 ne dup {setmanualfeed} if @@ -107,62 +107,62 @@ FrameDict /bug get { currenttransfer cvlit /orgxfer exch def currentscreen cvlit /orgproc exch def /organgle exch def /orgfreq exch def - setpapername - manualfeed {true} {papersize} ifelse - {manualpapersize} {false} ifelse + setpapername + manualfeed {true} {papersize} ifelse + {manualpapersize} {false} ifelse {desperatepapersize} if - end - } def + end + } def /pagesave FMLOCAL /orgmatrix FMLOCAL /landscape FMLOCAL -/FMBEGINPAGE { - FrameDict begin +/FMBEGINPAGE { + FrameDict begin /pagesave save def 3.86 setmiterlimit /landscape exch 0 ne def - landscape { - 90 rotate 0 exch neg translate pop + landscape { + 90 rotate 0 exch neg translate pop } {pop pop} ifelse xscale yscale scale /orgmatrix matrix def - gsave - } def + gsave + } def /FMENDPAGE { - grestore + grestore pagesave restore - end + end showpage - } def -/FMFONTDEFINE { + } def +/FMFONTDEFINE { FrameDict begin - findfont - ReEncode - 1 index exch - definefont - FMfonts 3 1 roll + findfont + ReEncode + 1 index exch + definefont + FMfonts 3 1 roll put - end - } def + end + } def /FMFILLS { FrameDict begin array /fillvals exch def - end - } def + end + } def /FMFILL { FrameDict begin fillvals 3 1 roll put - end - } def -/FMNORMALIZEGRAPHICS { + end + } def +/FMNORMALIZEGRAPHICS { newpath 0.0 0.0 moveto 1 setlinewidth 0 setlinecap 0 0 0 sethsbcolor - 0 setgray + 0 setgray } bind def /fx FMLOCAL /fy FMLOCAL @@ -172,22 +172,22 @@ FrameDict /bug get { /lly FMLOCAL /urx FMLOCAL /ury FMLOCAL -/FMBEGINEPSF { - end - /FMEPSF save def - /showpage {} def - FMNORMALIZEGRAPHICS - [/fy /fx /fh /fw /ury /urx /lly /llx] {exch def} forall - fx fy translate +/FMBEGINEPSF { + end + /FMEPSF save def + /showpage {} def + FMNORMALIZEGRAPHICS + [/fy /fx /fh /fw /ury /urx /lly /llx] {exch def} forall + fx fy translate rotate - fw urx llx sub div fh ury lly sub div scale - llx neg lly neg translate + fw urx llx sub div fh ury lly sub div scale + llx neg lly neg translate } bind def /FMENDEPSF { FMEPSF restore - FrameDict begin + FrameDict begin } bind def -FrameDict begin +FrameDict begin /setmanualfeed { %%BeginFeature *ManualFeed True statusdict /manualfeed true put @@ -196,16 +196,16 @@ FrameDict begin /max {2 copy lt {exch} if pop} bind def /min {2 copy gt {exch} if pop} bind def /inch {72 mul} def -/pagedimen { - paperheight sub abs 16 lt exch +/pagedimen { + paperheight sub abs 16 lt exch paperwidth sub abs 16 lt and {/papername exch def} {pop} ifelse } def /papersizedict FMLOCAL -/setpapername { - /papersizedict 14 dict def +/setpapername { + /papersizedict 14 dict def papersizedict begin - /papername /unknown def + /papername /unknown def /Letter 8.5 inch 11.0 inch pagedimen /LetterSmall 7.68 inch 10.16 inch pagedimen /Tabloid 11.0 inch 17.0 inch pagedimen @@ -237,9 +237,9 @@ FrameDict begin /unknown {unknown} def papersizedict dup papername known {papername} {/unknown} ifelse get end - /FMdicttop countdictstack 1 add def - statusdict begin stopped end - countdictstack -1 FMdicttop {pop end} for + /FMdicttop countdictstack 1 add def + statusdict begin stopped end + countdictstack -1 FMdicttop {pop end} for } def /manualpapersize { papersizedict begin @@ -258,14 +258,14 @@ FrameDict begin /unknown {unknown} def papersizedict dup papername known {papername} {/unknown} ifelse get end - stopped + stopped } def /desperatepapersize { statusdict /setpageparams known { - paperwidth paperheight 0 1 + paperwidth paperheight 0 1 statusdict begin - {setpageparams} stopped pop + {setpageparams} stopped pop end } if } def @@ -314,18 +314,18 @@ FrameDict begin /Uacute /Ucircumflex /Ugrave /dotlessi /circumflex /tilde /macron /breve /dotaccent /ring /cedilla /hungarumlaut /ogonek /caron ] def -/ReEncode { - dup - length - dict begin +/ReEncode { + dup + length + dict begin { - 1 index /FID ne - {def} - {pop pop} ifelse - } forall - 0 eq {/Encoding DiacriticEncoding def} if - currentdict - end + 1 index /FID ne + {def} + {pop pop} ifelse + } forall + 0 eq {/Encoding DiacriticEncoding def} if + currentdict + end } bind def /graymode true def /bwidth FMLOCAL @@ -342,7 +342,7 @@ FrameDict begin /bpside exch def /bstring exch def /onbits 0 def /offbits 0 def - freq sangle landscape {90 add} if + freq sangle landscape {90 add} if {/y exch def /x exch def /xindex x 1 add 2 div bpside mul cvi def @@ -370,14 +370,14 @@ FrameDict begin /SAT FMLOCAL /BRIGHT FMLOCAL /Colors FMLOCAL -FMPrintInColor - +FMPrintInColor + { /HUE 0 def /SAT 0 def /BRIGHT 0 def % array of arrays Hue and Sat values for the separations [HUE BRIGHT] - /Colors + /Colors [[0 0 ] % black [0 0 ] % white [0.00 1.0] % red @@ -387,44 +387,44 @@ FMPrintInColor [0.83 1.0] % magenta [0.16 1.0] % comment / yellow ] def - - /BEGINBITMAPCOLOR { + + /BEGINBITMAPCOLOR { BITMAPCOLOR} def - /BEGINBITMAPCOLORc { + /BEGINBITMAPCOLORc { BITMAPCOLORc} def - /BEGINBITMAPTRUECOLOR { + /BEGINBITMAPTRUECOLOR { BITMAPTRUECOLOR } def - /BEGINBITMAPTRUECOLORc { + /BEGINBITMAPTRUECOLORc { BITMAPTRUECOLORc } def - /K { + /K { Colors exch get dup - 0 get /HUE exch store + 0 get /HUE exch store 1 get /BRIGHT exch store HUE 0 eq BRIGHT 0 eq and {1.0 SAT sub setgray} - {HUE SAT BRIGHT sethsbcolor} + {HUE SAT BRIGHT sethsbcolor} ifelse } def - /FMsetgray { - /SAT exch 1.0 exch sub store + /FMsetgray { + /SAT exch 1.0 exch sub store HUE 0 eq BRIGHT 0 eq and {1.0 SAT sub setgray} - {HUE SAT BRIGHT sethsbcolor} + {HUE SAT BRIGHT sethsbcolor} ifelse } bind def } - + { - /BEGINBITMAPCOLOR { + /BEGINBITMAPCOLOR { BITMAPGRAY} def - /BEGINBITMAPCOLORc { + /BEGINBITMAPCOLORc { BITMAPGRAYc} def - /BEGINBITMAPTRUECOLOR { + /BEGINBITMAPTRUECOLOR { BITMAPTRUEGRAY } def - /BEGINBITMAPTRUECOLORc { + /BEGINBITMAPTRUECOLORc { BITMAPTRUEGRAYc } def /FMsetgray {setgray} bind def - /K { + /K { pop } def } @@ -435,27 +435,27 @@ ifelse /dnormalize { dtransform round exch round exch idtransform } bind def -/lnormalize { +/lnormalize { 0 dtransform exch cvi 2 idiv 2 mul 1 add exch idtransform pop } bind def -/H { +/H { lnormalize setlinewidth } bind def /Z { setlinecap } bind def /fillvals FMLOCAL -/X { +/X { fillvals exch get dup type /stringtype eq - {8 1 setpattern} + {8 1 setpattern} {grayness} ifelse } bind def -/V { +/V { gsave eofill grestore } bind def -/N { +/N { stroke } bind def /M {newpath moveto} bind def @@ -463,15 +463,15 @@ ifelse /D {curveto} bind def /O {closepath} bind def /n FMLOCAL -/L { +/L { /n exch def newpath normalize - moveto + moveto 2 1 n {pop normalize lineto} for } bind def -/Y { - L +/Y { + L closepath } bind def /x1 FMLOCAL @@ -479,7 +479,7 @@ ifelse /y1 FMLOCAL /y2 FMLOCAL /rad FMLOCAL -/R { +/R { /y2 exch def /x2 exch def /y1 exch def @@ -488,9 +488,9 @@ ifelse x2 y1 x2 y2 x1 y2 - 4 Y + 4 Y } bind def -/RR { +/RR { /rad exch def normalize /y2 exch def @@ -507,87 +507,87 @@ ifelse closepath 16 {pop} repeat } bind def -/C { +/C { grestore gsave - R + R clip } bind def /FMpointsize FMLOCAL -/F { +/F { FMfonts exch get FMpointsize scalefont setfont } bind def -/Q { +/Q { /FMpointsize exch def - F + F } bind def -/T { +/T { moveto show } bind def -/RF { +/RF { rotate 0 ne {-1 1 scale} if } bind def -/TF { +/TF { gsave - moveto + moveto RF show grestore } bind def -/P { +/P { moveto 0 32 3 2 roll widthshow } bind def -/PF { +/PF { gsave - moveto + moveto RF 0 32 3 2 roll widthshow grestore } bind def -/S { +/S { moveto 0 exch ashow } bind def -/SF { +/SF { gsave moveto RF 0 exch ashow grestore } bind def -/B { +/B { moveto 0 32 4 2 roll 0 exch awidthshow } bind def -/BF { +/BF { gsave moveto RF 0 32 4 2 roll 0 exch awidthshow grestore } bind def -/G { +/G { gsave newpath - normalize translate 0.0 0.0 moveto - dnormalize scale - 0.0 0.0 1.0 5 3 roll arc + normalize translate 0.0 0.0 moveto + dnormalize scale + 0.0 0.0 1.0 5 3 roll arc closepath fill grestore } bind def -/A { +/A { gsave savematrix newpath - 2 index 2 div add exch 3 index 2 div sub exch - normalize 2 index 2 div sub exch 3 index 2 div add exch - translate - scale - 0.0 0.0 1.0 5 3 roll arc + 2 index 2 div add exch 3 index 2 div sub exch + normalize 2 index 2 div sub exch 3 index 2 div add exch + translate + scale + 0.0 0.0 1.0 5 3 roll arc restorematrix stroke grestore @@ -603,37 +603,37 @@ ifelse /FMsaveobject FMLOCAL /FMoptop FMLOCAL /FMdicttop FMLOCAL -/BEGINPRINTCODE { - /FMdicttop countdictstack 1 add def - /FMoptop count 4 sub def +/BEGINPRINTCODE { + /FMdicttop countdictstack 1 add def + /FMoptop count 4 sub def /FMsaveobject save def - userdict begin - /showpage {} def - FMNORMALIZEGRAPHICS + userdict begin + /showpage {} def + FMNORMALIZEGRAPHICS 3 index neg 3 index neg translate } bind def /ENDPRINTCODE { - count -1 FMoptop {pop pop} for - countdictstack -1 FMdicttop {pop end} for - FMsaveobject restore + count -1 FMoptop {pop pop} for + countdictstack -1 FMdicttop {pop end} for + FMsaveobject restore } bind def -/gn { - 0 - { 46 mul - cf read pop - 32 sub - dup 46 lt {exit} if - 46 sub add +/gn { + 0 + { 46 mul + cf read pop + 32 sub + dup 46 lt {exit} if + 46 sub add } loop - add + add } bind def /str FMLOCAL -/cfs { - /str sl string def - 0 1 sl 1 sub {str exch val put} for - str def +/cfs { + /str sl string def + 0 1 sl 1 sub {str exch val put} for + str def } bind def -/ic [ +/ic [ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0223 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0223 0 @@ -655,49 +655,49 @@ ifelse /cs FMLOCAL /len FMLOCAL /pos FMLOCAL -/ms { - /sl exch def - /val 255 def - /ws cfs - /im cfs - /val 0 def - /bs cfs - /cs cfs +/ms { + /sl exch def + /val 255 def + /ws cfs + /im cfs + /val 0 def + /bs cfs + /cs cfs } bind def -400 ms -/ip { - is - 0 - cf cs readline pop - { ic exch get exec - add - } forall - pop - +400 ms +/ip { + is + 0 + cf cs readline pop + { ic exch get exec + add + } forall + pop + } bind def -/wh { - /len exch def - /pos exch def +/wh { + /len exch def + /pos exch def ws 0 len getinterval im pos len getinterval copy pop - pos len + pos len } bind def -/bl { - /len exch def - /pos exch def +/bl { + /len exch def + /pos exch def bs 0 len getinterval im pos len getinterval copy pop - pos len + pos len } bind def /s1 1 string def -/fl { - /len exch def - /pos exch def +/fl { + /len exch def + /pos exch def /val cf s1 readhexstring pop 0 get def pos 1 pos len add 1 sub {im exch val put} for - pos len + pos len } bind def -/hx { - 3 copy getinterval - cf exch readhexstring pop pop +/hx { + 3 copy getinterval + cf exch readhexstring pop pop } bind def /h FMLOCAL /w FMLOCAL @@ -706,57 +706,57 @@ ifelse /bitmapsave FMLOCAL /is FMLOCAL /cf FMLOCAL -/wbytes { - dup +/wbytes { + dup 8 eq {pop} {1 eq {7 add 8 idiv} {3 add 4 idiv} ifelse} ifelse } bind def -/BEGINBITMAPBWc { +/BEGINBITMAPBWc { 1 {} COMMONBITMAPc } bind def -/BEGINBITMAPGRAYc { +/BEGINBITMAPGRAYc { 8 {} COMMONBITMAPc } bind def -/BEGINBITMAP2BITc { +/BEGINBITMAP2BITc { 2 {} COMMONBITMAPc } bind def -/COMMONBITMAPc { +/COMMONBITMAPc { /r exch def /d exch def gsave translate rotate scale /h exch def /w exch def - /lb w d wbytes def - sl lb lt {lb ms} if - /bitmapsave save def - r - /is im 0 lb getinterval def - ws 0 lb getinterval is copy pop - /cf currentfile def - w h d [w 0 0 h neg 0 h] - {ip} image - bitmapsave restore + /lb w d wbytes def + sl lb lt {lb ms} if + /bitmapsave save def + r + /is im 0 lb getinterval def + ws 0 lb getinterval is copy pop + /cf currentfile def + w h d [w 0 0 h neg 0 h] + {ip} image + bitmapsave restore grestore } bind def -/BEGINBITMAPBW { +/BEGINBITMAPBW { 1 {} COMMONBITMAP } bind def -/BEGINBITMAPGRAY { +/BEGINBITMAPGRAY { 8 {} COMMONBITMAP } bind def -/BEGINBITMAP2BIT { +/BEGINBITMAP2BIT { 2 {} COMMONBITMAP } bind def -/COMMONBITMAP { +/COMMONBITMAP { /r exch def /d exch def gsave translate rotate scale /h exch def /w exch def - /bitmapsave save def - r + /bitmapsave save def + r /is w d wbytes string def - /cf currentfile def - w h d [w 0 0 h neg 0 h] + /cf currentfile def + w h d [w 0 0 h neg 0 h] {cf is readhexstring pop} image - bitmapsave restore + bitmapsave restore grestore } bind def /proc1 FMLOCAL @@ -813,7 +813,7 @@ ifelse /tran FMLOCAL /fakecolorsetup { /tran 256 string def - 0 1 255 {/indx exch def + 0 1 255 {/indx exch def tran indx red indx get 77 mul green indx get 151 mul @@ -823,77 +823,77 @@ ifelse {255 mul cvi tran exch get 255.0 div} exch Fmcc settransfer } bind def -/BITMAPCOLOR { +/BITMAPCOLOR { /d 8 def gsave translate rotate scale /h exch def /w exch def - /bitmapsave save def + /bitmapsave save def colorsetup /is w d wbytes string def - /cf currentfile def - w h d [w 0 0 h neg 0 h] - {cf is readhexstring pop} {is} {is} true 3 colorimage - bitmapsave restore + /cf currentfile def + w h d [w 0 0 h neg 0 h] + {cf is readhexstring pop} {is} {is} true 3 colorimage + bitmapsave restore grestore } bind def -/BITMAPCOLORc { +/BITMAPCOLORc { /d 8 def gsave translate rotate scale /h exch def /w exch def - /lb w d wbytes def - sl lb lt {lb ms} if - /bitmapsave save def + /lb w d wbytes def + sl lb lt {lb ms} if + /bitmapsave save def colorsetup - /is im 0 lb getinterval def - ws 0 lb getinterval is copy pop - /cf currentfile def - w h d [w 0 0 h neg 0 h] + /is im 0 lb getinterval def + ws 0 lb getinterval is copy pop + /cf currentfile def + w h d [w 0 0 h neg 0 h] {ip} {is} {is} true 3 colorimage - bitmapsave restore + bitmapsave restore grestore } bind def -/BITMAPTRUECOLORc { +/BITMAPTRUECOLORc { gsave translate rotate scale /h exch def /w exch def - /bitmapsave save def - + /bitmapsave save def + /is w string def - - ws 0 w getinterval is copy pop - /cf currentfile def - w h 8 [w 0 0 h neg 0 h] + + ws 0 w getinterval is copy pop + /cf currentfile def + w h 8 [w 0 0 h neg 0 h] {ip} {gip} {bip} true 3 colorimage - bitmapsave restore + bitmapsave restore grestore } bind def -/BITMAPTRUECOLOR { +/BITMAPTRUECOLOR { gsave translate rotate scale /h exch def /w exch def - /bitmapsave save def + /bitmapsave save def /is w string def /gis w string def /bis w string def - /cf currentfile def - w h 8 [w 0 0 h neg 0 h] - { cf is readhexstring pop } - { cf gis readhexstring pop } - { cf bis readhexstring pop } - true 3 colorimage - bitmapsave restore + /cf currentfile def + w h 8 [w 0 0 h neg 0 h] + { cf is readhexstring pop } + { cf gis readhexstring pop } + { cf bis readhexstring pop } + true 3 colorimage + bitmapsave restore grestore } bind def -/BITMAPTRUEGRAYc { +/BITMAPTRUEGRAYc { gsave translate rotate scale /h exch def /w exch def - /bitmapsave save def - + /bitmapsave save def + /is w string def - - ws 0 w getinterval is copy pop - /cf currentfile def - w h 8 [w 0 0 h neg 0 h] + + ws 0 w getinterval is copy pop + /cf currentfile def + w h 8 [w 0 0 h neg 0 h] {ip gip bip w gray} image - bitmapsave restore + bitmapsave restore grestore } bind def /ww FMLOCAL @@ -901,7 +901,7 @@ ifelse /g FMLOCAL /b FMLOCAL /i FMLOCAL -/gray { +/gray { /ww exch def /b exch def /g exch def @@ -910,30 +910,30 @@ ifelse b i get .114 mul add add r i 3 -1 roll floor cvi put } for r } bind def -/BITMAPTRUEGRAY { +/BITMAPTRUEGRAY { gsave translate rotate scale /h exch def /w exch def - /bitmapsave save def + /bitmapsave save def /is w string def /gis w string def /bis w string def - /cf currentfile def - w h 8 [w 0 0 h neg 0 h] - { cf is readhexstring pop - cf gis readhexstring pop + /cf currentfile def + w h 8 [w 0 0 h neg 0 h] + { cf is readhexstring pop + cf gis readhexstring pop cf bis readhexstring pop w gray} image - bitmapsave restore + bitmapsave restore grestore } bind def -/BITMAPGRAY { +/BITMAPGRAY { 8 {fakecolorsetup} COMMONBITMAP } bind def -/BITMAPGRAYc { +/BITMAPGRAYc { 8 {fakecolorsetup} COMMONBITMAPc } bind def /ENDBITMAP { } bind def -end +end /ALDsave FMLOCAL /ALDmatrix matrix def ALDmatrix currentmatrix pop /StartALD { diff --git a/library/images/logo.eps b/library/images/logo.eps index 0d05d34..006e72a 100644 --- a/library/images/logo.eps +++ b/library/images/logo.eps @@ -28,7 +28,7 @@ %%BeginProlog %%BeginResource: procset Adobe_level2_AI5 1.0 0 %%Title: (Adobe Illustrator (R) Version 5.0 Level 2 Emulation) -%%Version: 1.0 +%%Version: 1.0 %%CreationDate: (04/10/93) () %%Copyright: ((C) 1987-1993 Adobe Systems Incorporated All Rights Reserved) userdict /Adobe_level2_AI5 21 dict dup begin @@ -77,7 +77,7 @@ userdict /Adobe_level2_AI5 21 dict dup begin } def } if - + /gt38? mark {version cvx exec} stopped {cleartomark true} {38 gt exch pop} ifelse def userdict /deviceDPI 72 0 matrix defaultmatrix dtransform dup mul exch dup mul add sqrt put userdict /level2? @@ -178,7 +178,7 @@ userdict /Adobe_level2_AI5 21 dict dup begin %%EndResource %%BeginResource: procset Adobe_IllustratorA_AI5 1.1 0 %%Title: (Adobe Illustrator (R) Version 5.0 Abbreviated Prolog) -%%Version: 1.1 +%%Version: 1.1 %%CreationDate: (3/7/1994) () %%Copyright: ((C) 1987-1994 Adobe Systems Incorporated All Rights Reserved) currentpacking true setpacking @@ -1062,7 +1062,7 @@ end } { /clipForward? true def - + /Tx /pop load def /Tj /pop load def currentdict end clipRenderOff begin begin @@ -1089,7 +1089,7 @@ end end end begin - + /clipForward? false ddef } if } ifelse diff --git a/library/images/pwrdLogo.eps b/library/images/pwrdLogo.eps index e11d9e9..674250f 100644 --- a/library/images/pwrdLogo.eps +++ b/library/images/pwrdLogo.eps @@ -28,7 +28,7 @@ %%BeginProlog %%BeginResource: procset Adobe_level2_AI5 1.0 0 %%Title: (Adobe Illustrator (R) Version 5.0 Level 2 Emulation) -%%Version: 1.0 +%%Version: 1.0 %%CreationDate: (04/10/93) () %%Copyright: ((C) 1987-1993 Adobe Systems Incorporated All Rights Reserved) userdict /Adobe_level2_AI5 21 dict dup begin @@ -77,7 +77,7 @@ userdict /Adobe_level2_AI5 21 dict dup begin } def } if - + /gt38? mark {version cvx exec} stopped {cleartomark true} {38 gt exch pop} ifelse def userdict /deviceDPI 72 0 matrix defaultmatrix dtransform dup mul exch dup mul add sqrt put userdict /level2? @@ -178,7 +178,7 @@ userdict /Adobe_level2_AI5 21 dict dup begin %%EndResource %%BeginResource: procset Adobe_IllustratorA_AI5 1.1 0 %%Title: (Adobe Illustrator (R) Version 5.0 Abbreviated Prolog) -%%Version: 1.1 +%%Version: 1.1 %%CreationDate: (3/7/1994) () %%Copyright: ((C) 1987-1994 Adobe Systems Incorporated All Rights Reserved) currentpacking true setpacking @@ -1062,7 +1062,7 @@ end } { /clipForward? true def - + /Tx /pop load def /Tj /pop load def currentdict end clipRenderOff begin begin @@ -1089,7 +1089,7 @@ end end end begin - + /clipForward? false ddef } if } ifelse diff --git a/library/ttk/button.tcl b/library/ttk/button.tcl index 9f2cec7..24065c2 100644 --- a/library/ttk/button.tcl +++ b/library/ttk/button.tcl @@ -8,7 +8,7 @@ # (If the button is released off the widget, the grab deactivates and # we get a event then, which turns off the "active" state) # -# Normally, and events are +# Normally, and events are # delivered to the widget which received the initial # event. However, Tk [grab]s (#1223103) and menu interactions # (#1222605) can interfere with this. To guard against spurious diff --git a/library/ttk/clamTheme.tcl b/library/ttk/clamTheme.tcl index f184ea0..1789b8a 100644 --- a/library/ttk/clamTheme.tcl +++ b/library/ttk/clamTheme.tcl @@ -5,7 +5,7 @@ # namespace eval ttk::theme::clam { - variable colors + variable colors array set colors { -disabledfg "#999999" -frame "#dcdad5" diff --git a/library/ttk/defaults.tcl b/library/ttk/defaults.tcl index 05a46bd..4551966 100644 --- a/library/ttk/defaults.tcl +++ b/library/ttk/defaults.tcl @@ -40,7 +40,7 @@ namespace eval ttk::theme::default { ttk::style configure TButton \ -anchor center -padding "3 3" -width -9 \ -relief raised -shiftrelief 1 - ttk::style map TButton -relief [list {!disabled pressed} sunken] + ttk::style map TButton -relief [list {!disabled pressed} sunken] ttk::style configure TCheckbutton \ -indicatorcolor "#ffffff" -indicatorrelief sunken -padding 1 diff --git a/library/ttk/entry.tcl b/library/ttk/entry.tcl index b3ebcbd..647d16e 100644 --- a/library/ttk/entry.tcl +++ b/library/ttk/entry.tcl @@ -418,7 +418,7 @@ proc ttk::entry::DragOut {w mode} { # Suspend autoscroll. # proc ttk::entry::DragIn {w} { - ttk::CancelRepeat + ttk::CancelRepeat } ## binding @@ -432,7 +432,7 @@ proc ttk::entry::Release {w} { ## AutoScroll # Called repeatedly when the mouse is outside an entry window # with Button 1 down. Scroll the window left or right, -# depending on where the mouse left the window, and extend +# depending on where the mouse left the window, and extend # the selection according to the current selection mode. # # TODO: AutoScroll should repeat faster (50ms) than normal autorepeat. diff --git a/library/ttk/menubutton.tcl b/library/ttk/menubutton.tcl index 093bb02..ad57020 100644 --- a/library/ttk/menubutton.tcl +++ b/library/ttk/menubutton.tcl @@ -10,7 +10,7 @@ # (In addition, when menu system is active, "dropdown" -- menu posts # on mouse-over. Ttk menubuttons don't implement this). # -# For keyboard and popdown mode, we hand off to tk_popup and let +# For keyboard and popdown mode, we hand off to tk_popup and let # the built-in Tk bindings handle the rest of the interaction. # # ON X11: @@ -22,13 +22,13 @@ # rely on the passive grab that occurs on events, # and transition to popdown mode when the mouse is released # or dragged outside the menubutton. -# +# # ON WINDOWS: # -# I'm not sure what the hell is going on here. [$menu post] apparently +# I'm not sure what the hell is going on here. [$menu post] apparently # sets up some kind of internal grab for native menus. # On this platform, just use [tk_popup] for all menu actions. -# +# # ON MACOS: # # Same probably applies here. @@ -61,7 +61,7 @@ if {[tk windowingsystem] eq "x11"} { } # PostPosition -- -# Returns the x and y coordinates where the menu +# Returns the x and y coordinates where the menu # should be posted, based on the menubutton and menu size # and -direction option. # @@ -85,7 +85,7 @@ proc ttk::menubutton::PostPosition {mb menu} { below { if {$y <= $sh} { incr y $bh } { incr y -$mh } } left { if {$x >= $mw} { incr x -$mw } { incr x $bw } } right { if {$x <= $sw} { incr x $bw } { incr x -$mw } } - flush { + flush { # post menu atop menubutton. # If there's a menu entry whose label matches the # menubutton -text, assume this is an optionmenu @@ -113,7 +113,7 @@ proc ttk::menubutton::Popdown {mb} { # Pulldown (X11 only) -- # Called when Button1 is pressed on a menubutton. -# Posts the menu; a subsequent ButtonRelease +# Posts the menu; a subsequent ButtonRelease # or Leave event will set a grab on the menu. # proc ttk::menubutton::Pulldown {mb} { diff --git a/library/ttk/notebook.tcl b/library/ttk/notebook.tcl index 72b85e6..92efe40 100644 --- a/library/ttk/notebook.tcl +++ b/library/ttk/notebook.tcl @@ -70,7 +70,7 @@ proc ttk::notebook::CycleTab {w dir} { } # MnemonicTab $nb $key -- -# Scan all tabs in the specified notebook for one with the +# Scan all tabs in the specified notebook for one with the # specified mnemonic. If found, returns path name of tab; # otherwise returns "" # @@ -94,8 +94,8 @@ proc ttk::notebook::MnemonicTab {nb key} { # Enable keyboard traversal for a notebook widget # by adding bindings to the containing toplevel window. # -# TLNotebooks($top) keeps track of the list of all traversal-enabled -# notebooks contained in the toplevel +# TLNotebooks($top) keeps track of the list of all traversal-enabled +# notebooks contained in the toplevel # proc ttk::notebook::enableTraversal {nb} { variable TLNotebooks @@ -145,7 +145,7 @@ proc ttk::notebook::Cleanup {nb} { } } -# EnclosingNotebook $w -- +# EnclosingNotebook $w -- # Return the nearest traversal-enabled notebook widget # that contains $w. # @@ -171,7 +171,7 @@ proc ttk::notebook::EnclosingNotebook {w} { # TLCycleTab -- # toplevel binding procedure for Control-Tab / Control-Shift-Tab -# Select the next/previous tab in the nearest ancestor notebook. +# Select the next/previous tab in the nearest ancestor notebook. # proc ttk::notebook::TLCycleTab {w dir} { set nb [EnclosingNotebook $w] diff --git a/library/ttk/scrollbar.tcl b/library/ttk/scrollbar.tcl index 4bd5107..17d729d 100644 --- a/library/ttk/scrollbar.tcl +++ b/library/ttk/scrollbar.tcl @@ -86,7 +86,7 @@ proc ttk::scrollbar::Press {w x y} { proc ttk::scrollbar::Drag {w x y} { variable State if {![info exists State(first)]} { - # Initial buttonpress was not on the thumb, + # Initial buttonpress was not on the thumb, # or something screwy has happened. In either case, ignore: return; } diff --git a/library/ttk/treeview.tcl b/library/ttk/treeview.tcl index 8772587..c38b5b6 100644 --- a/library/ttk/treeview.tcl +++ b/library/ttk/treeview.tcl @@ -46,7 +46,7 @@ bind Treeview \ bind Treeview <> \ { ttk::treeview::Select %W %x %y toggle } -ttk::copyBindings TtkScrollable Treeview +ttk::copyBindings TtkScrollable Treeview ### Binding procedures. # diff --git a/library/ttk/ttk.tcl b/library/ttk/ttk.tcl index 7bae211..665222d 100644 --- a/library/ttk/ttk.tcl +++ b/library/ttk/ttk.tcl @@ -122,7 +122,7 @@ proc ttk::LoadThemes {} { variable library # "default" always present: - uplevel #0 [list source [file join $library defaults.tcl]] + uplevel #0 [list source [file join $library defaults.tcl]] set builtinThemes [style theme names] foreach {theme scripts} { diff --git a/library/ttk/vistaTheme.tcl b/library/ttk/vistaTheme.tcl index 99410cb..1ec824a 100644 --- a/library/ttk/vistaTheme.tcl +++ b/library/ttk/vistaTheme.tcl @@ -3,7 +3,7 @@ # # The Vista theme can only be defined on Windows Vista and above. The theme -# is created in C due to the need to assign a theme-enabled function for +# is created in C due to the need to assign a theme-enabled function for # detecting when themeing is disabled. On systems that cannot support the # Vista theme, there will be no such theme created and we must not # evaluate this script. @@ -146,7 +146,7 @@ namespace eval ttk::theme::vista { -selectforeground [list !focus SystemWindowText] \ ; - + # SCROLLBAR elements (Vista includes a state for 'hover') ttk::style element create Vertical.Scrollbar.uparrow vsapi \ SCROLLBAR 1 {disabled 4 pressed 3 active 2 hover 17 {} 1} \ @@ -191,7 +191,7 @@ namespace eval ttk::theme::vista { Vertical.Progressbar.pbar -side bottom -sticky we } } - + # Scale ttk::style element create Horizontal.Scale.slider vsapi \ TRACKBAR 3 {disabled 5 focus 4 pressed 3 active 2 {} 1} \ @@ -215,10 +215,10 @@ namespace eval ttk::theme::vista { } } } - + # Treeview ttk::style configure Item -padding {4 0 0 0} - + package provide ttk::theme::vista 1.0 } } -- cgit v0.12 From a5789838618b2fa7bba1b3ed500823b119e2a017 Mon Sep 17 00:00:00 2001 From: fvogel Date: Thu, 10 Mar 2016 16:25:35 +0000 Subject: Added non regression test case for bug [d95e5d8f16] --- tests/panedwindow.test | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/tests/panedwindow.test b/tests/panedwindow.test index 666ed9c..ee184ce 100644 --- a/tests/panedwindow.test +++ b/tests/panedwindow.test @@ -4955,6 +4955,38 @@ test panedwindow-23.30 {ConfigurePanes, -hide works} -setup { } -cleanup { deleteWindows } -result {1 1 1 0 39 40 40 1 130 1 0 1 1 40 40 40 42 130} +test panedwindow-23.30a {ConfigurePanes, hidden panes are unmapped} -setup { + deleteWindows +} -body { + panedwindow .p1 -sashrelief raised + panedwindow .p2 -sashrelief raised + label .l1 -text Label1 + label .l2 -text Label2 + label .l3 -text Label3 + .p2 add .l2 -sticky nsew + .p2 add .l3 -sticky nsew + .p1 add .p2 -sticky nsew + .p1 add .l1 -sticky nsew + pack .p1 -side top -expand 1 -fill both + update + set result [list] + lappend result [list [winfo ismapped .p1] [winfo ismapped .p2] \ + [winfo ismapped .l1] [winfo ismapped .l2] [winfo ismapped .l3]] + .p2 paneconfigure .l1 -hide 1 + update + lappend result [list [winfo ismapped .p1] [winfo ismapped .p2] \ + [winfo ismapped .l1] [winfo ismapped .l2] [winfo ismapped .l3]] + .p1 paneconfigure .p2 -hide 1 + update + lappend result [list [winfo ismapped .p1] [winfo ismapped .p2] \ + [winfo ismapped .l1] [winfo ismapped .l2] [winfo ismapped .l3]] + .p1 paneconfigure .p2 -hide 0 + update + lappend result [list [winfo ismapped .p1] [winfo ismapped .p2] \ + [winfo ismapped .l1] [winfo ismapped .l2] [winfo ismapped .l3]] +} -cleanup { + deleteWindows +} -result {{1 1 1 1 1} {1 1 0 1 1} {1 0 0 0 0} {1 1 0 1 1}} test panedwindow-23.31 {ConfigurePanes, -hide works, last pane stretches} -setup { deleteWindows } -body { -- cgit v0.12 From 65f9c65e9b4a62c03e4952cad4070a8b0ee488ab Mon Sep 17 00:00:00 2001 From: "jan.nijtmans" Date: Fri, 11 Mar 2016 14:47:03 +0000 Subject: Excess spacing in documentation --- doc/3DBorder.3 | 2 +- doc/BindTable.3 | 2 +- doc/CanvPsY.3 | 2 +- doc/CanvTkwin.3 | 2 +- doc/CanvTxtInfo.3 | 2 +- doc/Clipboard.3 | 2 +- doc/ClrSelect.3 | 2 +- doc/ConfigWind.3 | 2 +- doc/CoordToWin.3 | 2 +- doc/CrtCmHdlr.3 | 2 +- doc/CrtConsoleChan.3 | 2 +- doc/CrtErrHdlr.3 | 2 +- doc/CrtGenHdlr.3 | 2 +- doc/CrtImgType.3 | 2 +- doc/CrtItemType.3 | 2 +- doc/CrtPhImgFmt.3 | 2 +- doc/DeleteImg.3 | 2 +- doc/DrawFocHlt.3 | 2 +- doc/EventHndlr.3 | 2 +- doc/FindPhoto.3 | 2 +- doc/FreeXId.3 | 2 +- doc/GeomReq.3 | 2 +- doc/GetAnchor.3 | 2 +- doc/GetBitmap.3 | 2 +- doc/GetCapStyl.3 | 2 +- doc/GetClrmap.3 | 2 +- doc/GetDash.3 | 2 +- doc/GetGC.3 | 2 +- doc/GetHINSTANCE.3 | 2 +- doc/GetHWND.3 | 2 +- doc/GetImage.3 | 2 +- doc/GetJoinStl.3 | 2 +- doc/GetJustify.3 | 2 +- doc/GetOption.3 | 2 +- doc/GetPixels.3 | 2 +- doc/GetPixmap.3 | 2 +- doc/GetRelief.3 | 2 +- doc/GetRootCrd.3 | 2 +- doc/GetScroll.3 | 2 +- doc/GetSelect.3 | 2 +- doc/GetUid.3 | 2 +- doc/GetVRoot.3 | 2 +- doc/GetVisual.3 | 2 +- doc/Grab.3 | 2 +- doc/HWNDToWindow.3 | 2 +- doc/HandleEvent.3 | 2 +- doc/IdToWindow.3 | 2 +- doc/ImgChanged.3 | 2 +- doc/Inactive.3 | 2 +- doc/InternAtom.3 | 2 +- doc/MainLoop.3 | 2 +- doc/MainWin.3 | 2 +- doc/MaintGeom.3 | 2 +- doc/ManageGeom.3 | 2 +- doc/MoveToplev.3 | 2 +- doc/Name.3 | 2 +- doc/NameOfImg.3 | 2 +- doc/OwnSelect.3 | 2 +- doc/ParseArgv.3 | 2 +- doc/QWinEvent.3 | 2 +- doc/Restack.3 | 2 +- doc/RestrictEv.3 | 2 +- doc/SetAppName.3 | 2 +- doc/SetCaret.3 | 2 +- doc/SetClass.3 | 2 +- doc/SetClassProcs.3 | 2 +- doc/SetGrid.3 | 2 +- doc/SetOptions.3 | 2 +- doc/SetVisual.3 | 2 +- doc/StrictMotif.3 | 2 +- doc/TkInitStubs.3 | 2 +- doc/Tk_Init.3 | 2 +- doc/bell.n | 2 +- doc/bind.n | 2 +- doc/bindtags.n | 2 +- doc/bitmap.n | 2 +- doc/chooseColor.n | 2 +- doc/console.n | 2 +- doc/cursors.n | 4 ++-- doc/destroy.n | 2 +- doc/dialog.n | 2 +- doc/entry.n | 2 +- doc/focus.n | 2 +- doc/focusNext.n | 2 +- doc/fontchooser.n | 2 +- doc/frame.n | 2 +- doc/grab.n | 2 +- doc/grid.n | 2 +- doc/image.n | 2 +- doc/label.n | 2 +- doc/lower.n | 2 +- doc/menubar.n | 2 +- doc/menubutton.n | 2 +- doc/message.n | 2 +- doc/option.n | 2 +- doc/optionMenu.n | 2 +- doc/pack-old.n | 2 +- doc/pack.n | 2 +- doc/palette.n | 2 +- doc/photo.n | 2 +- doc/place.n | 2 +- doc/popup.n | 2 +- doc/raise.n | 2 +- doc/scrollbar.n | 2 +- doc/send.n | 2 +- doc/spinbox.n | 2 +- doc/text.n | 2 +- doc/tk.n | 2 +- doc/tk_mac.n | 2 +- doc/tkvars.n | 2 +- doc/tkwait.n | 2 +- doc/toplevel.n | 2 +- doc/ttk_Theme.3 | 2 +- doc/ttk_sizegrip.n | 2 +- doc/winfo.n | 2 +- doc/wish.1 | 4 ++-- 116 files changed, 118 insertions(+), 118 deletions(-) diff --git a/doc/3DBorder.3 b/doc/3DBorder.3 index f2f0eb8..f589e66 100644 --- a/doc/3DBorder.3 +++ b/doc/3DBorder.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_Alloc3DBorderFromObj 3 8.1 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/BindTable.3 b/doc/BindTable.3 index 5130bfc..772f39f 100644 --- a/doc/BindTable.3 +++ b/doc/BindTable.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_CreateBindingTable 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/CanvPsY.3 b/doc/CanvPsY.3 index 5e104ce..f789d3c 100644 --- a/doc/CanvPsY.3 +++ b/doc/CanvPsY.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_CanvasPs 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/CanvTkwin.3 b/doc/CanvTkwin.3 index d53c5b1..6ae3d97 100644 --- a/doc/CanvTkwin.3 +++ b/doc/CanvTkwin.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_CanvasTkwin 3 4.1 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/CanvTxtInfo.3 b/doc/CanvTxtInfo.3 index 92a2bc3..1dd2354 100644 --- a/doc/CanvTxtInfo.3 +++ b/doc/CanvTxtInfo.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_CanvasTextInfo 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/Clipboard.3 b/doc/Clipboard.3 index 3087777..cc09018 100644 --- a/doc/Clipboard.3 +++ b/doc/Clipboard.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_ClipboardClear 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/ClrSelect.3 b/doc/ClrSelect.3 index c56f63c..1b942b5 100644 --- a/doc/ClrSelect.3 +++ b/doc/ClrSelect.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_ClearSelection 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/ConfigWind.3 b/doc/ConfigWind.3 index 7c7adab..3e83387 100644 --- a/doc/ConfigWind.3 +++ b/doc/ConfigWind.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_ConfigureWindow 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/CoordToWin.3 b/doc/CoordToWin.3 index 5fe96a6..1ebd681 100644 --- a/doc/CoordToWin.3 +++ b/doc/CoordToWin.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_CoordsToWindow 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/CrtCmHdlr.3 b/doc/CrtCmHdlr.3 index 98b93f7..01c3852 100644 --- a/doc/CrtCmHdlr.3 +++ b/doc/CrtCmHdlr.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_CreateClientMessageHandler 3 "8.4" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/CrtConsoleChan.3 b/doc/CrtConsoleChan.3 index 7fd8a6a..d8e0740 100644 --- a/doc/CrtConsoleChan.3 +++ b/doc/CrtConsoleChan.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_InitConsoleChannels 3 8.5 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/CrtErrHdlr.3 b/doc/CrtErrHdlr.3 index e506220..e6ebafe 100644 --- a/doc/CrtErrHdlr.3 +++ b/doc/CrtErrHdlr.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_CreateErrorHandler 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/CrtGenHdlr.3 b/doc/CrtGenHdlr.3 index c2161d1..c2aac03 100644 --- a/doc/CrtGenHdlr.3 +++ b/doc/CrtGenHdlr.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_CreateGenericHandler 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/CrtImgType.3 b/doc/CrtImgType.3 index cbbc11e..4949c50 100644 --- a/doc/CrtImgType.3 +++ b/doc/CrtImgType.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_CreateImageType 3 8.5 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/CrtItemType.3 b/doc/CrtItemType.3 index 005d2e2..f9198f3 100644 --- a/doc/CrtItemType.3 +++ b/doc/CrtItemType.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_CreateItemType 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/CrtPhImgFmt.3 b/doc/CrtPhImgFmt.3 index c7e792a..92f2441 100644 --- a/doc/CrtPhImgFmt.3 +++ b/doc/CrtPhImgFmt.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" '\" Author: Paul Mackerras (paulus@cs.anu.edu.au), '\" Department of Computer Science, '\" Australian National University. diff --git a/doc/DeleteImg.3 b/doc/DeleteImg.3 index 507be72..eb6db1e 100644 --- a/doc/DeleteImg.3 +++ b/doc/DeleteImg.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_DeleteImage 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/DrawFocHlt.3 b/doc/DrawFocHlt.3 index e2d1578..59cd069 100644 --- a/doc/DrawFocHlt.3 +++ b/doc/DrawFocHlt.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_DrawFocusHighlight 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/EventHndlr.3 b/doc/EventHndlr.3 index 97857fb..8c47e78 100644 --- a/doc/EventHndlr.3 +++ b/doc/EventHndlr.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_CreateEventHandler 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/FindPhoto.3 b/doc/FindPhoto.3 index d6ccb5b..3ce3a21 100644 --- a/doc/FindPhoto.3 +++ b/doc/FindPhoto.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" '\" Author: Paul Mackerras (paulus@cs.anu.edu.au), '\" Department of Computer Science, '\" Australian National University. diff --git a/doc/FreeXId.3 b/doc/FreeXId.3 index dd1d141..56c7804 100644 --- a/doc/FreeXId.3 +++ b/doc/FreeXId.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_FreeXId 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GeomReq.3 b/doc/GeomReq.3 index 895f683..7670521 100644 --- a/doc/GeomReq.3 +++ b/doc/GeomReq.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GeometryRequest 3 "8.4" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetAnchor.3 b/doc/GetAnchor.3 index 6526772..5d41ad6 100644 --- a/doc/GetAnchor.3 +++ b/doc/GetAnchor.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetAnchorFromObj 3 8.1 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetBitmap.3 b/doc/GetBitmap.3 index c4ac44e..88418c7 100644 --- a/doc/GetBitmap.3 +++ b/doc/GetBitmap.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_AllocBitmapFromObj 3 8.1 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetCapStyl.3 b/doc/GetCapStyl.3 index 28f1a1c..4e5d1d5 100644 --- a/doc/GetCapStyl.3 +++ b/doc/GetCapStyl.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetCapStyle 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetClrmap.3 b/doc/GetClrmap.3 index 9e6da12..4b72b6c 100644 --- a/doc/GetClrmap.3 +++ b/doc/GetClrmap.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetColormap 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetDash.3 b/doc/GetDash.3 index d1eeb70..2087424 100644 --- a/doc/GetDash.3 +++ b/doc/GetDash.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetDash 3 8.3 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetGC.3 b/doc/GetGC.3 index 44e06fb..6ee63a9 100644 --- a/doc/GetGC.3 +++ b/doc/GetGC.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetGC 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetHINSTANCE.3 b/doc/GetHINSTANCE.3 index de38051..980b374 100644 --- a/doc/GetHINSTANCE.3 +++ b/doc/GetHINSTANCE.3 @@ -1,7 +1,7 @@ '\" '\" Copyright (c) 1998-2000 by Scriptics Corporation. '\" All rights reserved. -'\" +'\" .TH Tk_GetHISTANCE 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetHWND.3 b/doc/GetHWND.3 index 1a5ec2d..15d2ff0 100644 --- a/doc/GetHWND.3 +++ b/doc/GetHWND.3 @@ -1,7 +1,7 @@ '\" '\" Copyright (c) 1998-2000 by Scriptics Corporation. '\" All rights reserved. -'\" +'\" .TH HWND 3 8.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetImage.3 b/doc/GetImage.3 index f2407bc..744f9ac 100644 --- a/doc/GetImage.3 +++ b/doc/GetImage.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetImage 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetJoinStl.3 b/doc/GetJoinStl.3 index a717b72..616719c 100644 --- a/doc/GetJoinStl.3 +++ b/doc/GetJoinStl.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetJoinStyle 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetJustify.3 b/doc/GetJustify.3 index b51cb8d..2e871cb 100644 --- a/doc/GetJustify.3 +++ b/doc/GetJustify.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetJustifyFromObj 3 8.1 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetOption.3 b/doc/GetOption.3 index 81846ad..799786d 100644 --- a/doc/GetOption.3 +++ b/doc/GetOption.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetOption 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetPixels.3 b/doc/GetPixels.3 index e7a9043..6c31af9 100644 --- a/doc/GetPixels.3 +++ b/doc/GetPixels.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetPixelsFromObj 3 8.1 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetPixmap.3 b/doc/GetPixmap.3 index 927c75c..65fae2d 100644 --- a/doc/GetPixmap.3 +++ b/doc/GetPixmap.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetPixmap 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetRelief.3 b/doc/GetRelief.3 index 6e8681a..5979662 100644 --- a/doc/GetRelief.3 +++ b/doc/GetRelief.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetReliefFromObj 3 8.1 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetRootCrd.3 b/doc/GetRootCrd.3 index a9d2cd9..20520ea 100644 --- a/doc/GetRootCrd.3 +++ b/doc/GetRootCrd.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetRootCoords 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetScroll.3 b/doc/GetScroll.3 index abd0880..70145aa 100644 --- a/doc/GetScroll.3 +++ b/doc/GetScroll.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetScrollInfo 3 8.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetSelect.3 b/doc/GetSelect.3 index 8c30a2b..11e837e 100644 --- a/doc/GetSelect.3 +++ b/doc/GetSelect.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetSelection 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetUid.3 b/doc/GetUid.3 index 06b466a..2cd95ad 100644 --- a/doc/GetUid.3 +++ b/doc/GetUid.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetUid 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetVRoot.3 b/doc/GetVRoot.3 index a65ef78..7e6003a 100644 --- a/doc/GetVRoot.3 +++ b/doc/GetVRoot.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetVRootGeometry 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/GetVisual.3 b/doc/GetVisual.3 index fe3d50c..fc6b6f8 100644 --- a/doc/GetVisual.3 +++ b/doc/GetVisual.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_GetVisual 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/Grab.3 b/doc/Grab.3 index 1dba2df..2741220 100644 --- a/doc/Grab.3 +++ b/doc/Grab.3 @@ -1,7 +1,7 @@ '\" '\" Copyright (c) 1998-2000 by Scriptics Corporation. '\" All rights reserved. -'\" +'\" .TH Tk_Grab 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/HWNDToWindow.3 b/doc/HWNDToWindow.3 index 9795099..a2e5a6c 100644 --- a/doc/HWNDToWindow.3 +++ b/doc/HWNDToWindow.3 @@ -1,7 +1,7 @@ '\" '\" Copyright (c) 1998-2000 by Scriptics Corporation. '\" All rights reserved. -'\" +'\" .TH Tk_HWNDToWindow 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/HandleEvent.3 b/doc/HandleEvent.3 index bc293b6..f3072de 100644 --- a/doc/HandleEvent.3 +++ b/doc/HandleEvent.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_HandleEvent 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/IdToWindow.3 b/doc/IdToWindow.3 index f6e397d..f8ce1f9 100644 --- a/doc/IdToWindow.3 +++ b/doc/IdToWindow.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_IdToWindow 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/ImgChanged.3 b/doc/ImgChanged.3 index f4d2c04..ccf0c11 100644 --- a/doc/ImgChanged.3 +++ b/doc/ImgChanged.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_ImageChanged 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/Inactive.3 b/doc/Inactive.3 index 5528fa5..d0fccf1 100644 --- a/doc/Inactive.3 +++ b/doc/Inactive.3 @@ -1,7 +1,7 @@ '\" '\" Copyright (c) 1998-2000 by Scriptics Corporation. '\" All rights reserved. -'\" +'\" .TH Tk_GetUserInactiveTime 3 8.5 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/InternAtom.3 b/doc/InternAtom.3 index a16eee1..e6756a5 100644 --- a/doc/InternAtom.3 +++ b/doc/InternAtom.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_InternAtom 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/MainLoop.3 b/doc/MainLoop.3 index ed4d0ea..770f254 100644 --- a/doc/MainLoop.3 +++ b/doc/MainLoop.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_MainLoop 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/MainWin.3 b/doc/MainWin.3 index c3af3e7..94bd7e2 100644 --- a/doc/MainWin.3 +++ b/doc/MainWin.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_MainWindow 3 7.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/MaintGeom.3 b/doc/MaintGeom.3 index d1c2d1c..b34e797 100644 --- a/doc/MaintGeom.3 +++ b/doc/MaintGeom.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_MaintainGeometry 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/ManageGeom.3 b/doc/ManageGeom.3 index 520546f..ba12aca 100644 --- a/doc/ManageGeom.3 +++ b/doc/ManageGeom.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_ManageGeometry 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/MoveToplev.3 b/doc/MoveToplev.3 index effed29..20ff120 100644 --- a/doc/MoveToplev.3 +++ b/doc/MoveToplev.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_MoveToplevelWindow 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/Name.3 b/doc/Name.3 index 4b9c5bc..1653cf5 100644 --- a/doc/Name.3 +++ b/doc/Name.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_Name 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/NameOfImg.3 b/doc/NameOfImg.3 index 78332db..38c7ca9 100644 --- a/doc/NameOfImg.3 +++ b/doc/NameOfImg.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_NameOfImage 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/OwnSelect.3 b/doc/OwnSelect.3 index ed9bcab..0e16eac 100644 --- a/doc/OwnSelect.3 +++ b/doc/OwnSelect.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_OwnSelection 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/ParseArgv.3 b/doc/ParseArgv.3 index 3a9bd49..b6362bd 100644 --- a/doc/ParseArgv.3 +++ b/doc/ParseArgv.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_ParseArgv 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/QWinEvent.3 b/doc/QWinEvent.3 index caa5026..9c43ce5 100644 --- a/doc/QWinEvent.3 +++ b/doc/QWinEvent.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_QueueWindowEvent 3 7.5 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/Restack.3 b/doc/Restack.3 index 2b9097f..5cd02eb 100644 --- a/doc/Restack.3 +++ b/doc/Restack.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_RestackWindow 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/RestrictEv.3 b/doc/RestrictEv.3 index eb1f040..103a80b 100644 --- a/doc/RestrictEv.3 +++ b/doc/RestrictEv.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_RestrictEvents 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/SetAppName.3 b/doc/SetAppName.3 index 3978850..91516a0 100644 --- a/doc/SetAppName.3 +++ b/doc/SetAppName.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_SetAppName 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/SetCaret.3 b/doc/SetCaret.3 index fd63f18..24cc18c 100644 --- a/doc/SetCaret.3 +++ b/doc/SetCaret.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_SetCaretPos 3 8.4 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/SetClass.3 b/doc/SetClass.3 index 707975d..0ea81bb 100644 --- a/doc/SetClass.3 +++ b/doc/SetClass.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_SetClass 3 "" Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/SetClassProcs.3 b/doc/SetClassProcs.3 index 58618da..a2af479 100644 --- a/doc/SetClassProcs.3 +++ b/doc/SetClassProcs.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_SetClassProcs 3 8.4 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/SetGrid.3 b/doc/SetGrid.3 index 28e428b..ea32afb 100644 --- a/doc/SetGrid.3 +++ b/doc/SetGrid.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_SetGrid 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/SetOptions.3 b/doc/SetOptions.3 index b5f0782..581b1e6 100644 --- a/doc/SetOptions.3 +++ b/doc/SetOptions.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_SetOptions 3 8.1 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/SetVisual.3 b/doc/SetVisual.3 index 6d3fd83..a5b9efd 100644 --- a/doc/SetVisual.3 +++ b/doc/SetVisual.3 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_SetWindowVisual 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/StrictMotif.3 b/doc/StrictMotif.3 index 4319d53..ec9319f 100644 --- a/doc/StrictMotif.3 +++ b/doc/StrictMotif.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_StrictMotif 3 4.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/TkInitStubs.3 b/doc/TkInitStubs.3 index 04f5611..57ec9e6 100644 --- a/doc/TkInitStubs.3 +++ b/doc/TkInitStubs.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_InitStubs 3 8.4 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/Tk_Init.3 b/doc/Tk_Init.3 index 7bc46dd..fc29318 100644 --- a/doc/Tk_Init.3 +++ b/doc/Tk_Init.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Tk_Init 3 8.0 Tk "Tk Library Procedures" .so man.macros .BS diff --git a/doc/bell.n b/doc/bell.n index 21c4f1b..3e8d112 100644 --- a/doc/bell.n +++ b/doc/bell.n @@ -5,7 +5,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH bell n 8.4 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/bind.n b/doc/bind.n index d189376..ab02396 100644 --- a/doc/bind.n +++ b/doc/bind.n @@ -5,7 +5,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH bind n 8.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/bindtags.n b/doc/bindtags.n index dc3973b..51c2ca9 100644 --- a/doc/bindtags.n +++ b/doc/bindtags.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH bindtags n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/bitmap.n b/doc/bitmap.n index ead3311..1751913 100644 --- a/doc/bitmap.n +++ b/doc/bitmap.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH bitmap n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/chooseColor.n b/doc/chooseColor.n index 015b17d..3fa6de3 100644 --- a/doc/chooseColor.n +++ b/doc/chooseColor.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tk_chooseColor n 4.2 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/console.n b/doc/console.n index 1313d3a..d4d8a74 100644 --- a/doc/console.n +++ b/doc/console.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH console n 8.4 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/cursors.n b/doc/cursors.n index 1662de4..a728755 100644 --- a/doc/cursors.n +++ b/doc/cursors.n @@ -1,9 +1,9 @@ '\" '\" Copyright (c) 1998-2000 by Scriptics Corporation. '\" All rights reserved. -'\" +'\" '\" Copyright (c) 2006-2007 Daniel A. Steffen -'\" +'\" .TH cursors n 8.3 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/destroy.n b/doc/destroy.n index 3d4743a..b10c679 100644 --- a/doc/destroy.n +++ b/doc/destroy.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH destroy n "" Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/dialog.n b/doc/dialog.n index d2031d3..e4938d2 100644 --- a/doc/dialog.n +++ b/doc/dialog.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tk_dialog n 4.1 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/entry.n b/doc/entry.n index ccfcd24..40b45c7 100644 --- a/doc/entry.n +++ b/doc/entry.n @@ -5,7 +5,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH entry n 8.3 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/focus.n b/doc/focus.n index 4b8bb2a..e3efcd3 100644 --- a/doc/focus.n +++ b/doc/focus.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH focus n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/focusNext.n b/doc/focusNext.n index ffcf971..3283d4b 100644 --- a/doc/focusNext.n +++ b/doc/focusNext.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tk_focusNext n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/fontchooser.n b/doc/fontchooser.n index bdd51c7..65aa8e7 100644 --- a/doc/fontchooser.n +++ b/doc/fontchooser.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH fontchooser n "" Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/frame.n b/doc/frame.n index 72a22db..6aa412e 100644 --- a/doc/frame.n +++ b/doc/frame.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH frame n 8.4 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/grab.n b/doc/grab.n index a6d0d19..9288e90 100644 --- a/doc/grab.n +++ b/doc/grab.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH grab n "" Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/grid.n b/doc/grid.n index 9ac84d9..07d07aa 100644 --- a/doc/grid.n +++ b/doc/grid.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH grid n 8.5 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/image.n b/doc/image.n index fd51cc0..70f5acf 100644 --- a/doc/image.n +++ b/doc/image.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH image n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/label.n b/doc/label.n index f2ba88c..107175e 100644 --- a/doc/label.n +++ b/doc/label.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH label n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/lower.n b/doc/lower.n index 8159a8b..d0b0551 100644 --- a/doc/lower.n +++ b/doc/lower.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH lower n 3.3 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/menubar.n b/doc/menubar.n index 023bf37..c3be85d 100644 --- a/doc/menubar.n +++ b/doc/menubar.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tk_menuBar n "" Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/menubutton.n b/doc/menubutton.n index 08b52a0..1f596ce 100644 --- a/doc/menubutton.n +++ b/doc/menubutton.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH menubutton n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/message.n b/doc/message.n index bd635ac..280c072 100644 --- a/doc/message.n +++ b/doc/message.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH message n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/option.n b/doc/option.n index 2763d64..6042010 100644 --- a/doc/option.n +++ b/doc/option.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH option n "" Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/optionMenu.n b/doc/optionMenu.n index 42275ce..eff6e86 100644 --- a/doc/optionMenu.n +++ b/doc/optionMenu.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tk_optionMenu n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/pack-old.n b/doc/pack-old.n index 217dba9..5ef5da1 100644 --- a/doc/pack-old.n +++ b/doc/pack-old.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH pack-old n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/pack.n b/doc/pack.n index 538af62..6b39e1d 100644 --- a/doc/pack.n +++ b/doc/pack.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH pack n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/palette.n b/doc/palette.n index 085c4c6..6a04450 100644 --- a/doc/palette.n +++ b/doc/palette.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tk_setPalette n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/photo.n b/doc/photo.n index 0fe0c61..84cf618 100644 --- a/doc/photo.n +++ b/doc/photo.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" '\" Author: Paul Mackerras (paulus@cs.anu.edu.au), '\" Department of Computer Science, '\" Australian National University. diff --git a/doc/place.n b/doc/place.n index 3a092c2..3ebaf20 100644 --- a/doc/place.n +++ b/doc/place.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH place n "" Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/popup.n b/doc/popup.n index 0d32362..6e6fd95 100644 --- a/doc/popup.n +++ b/doc/popup.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tk_popup n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/raise.n b/doc/raise.n index be20c74..0983ed2 100644 --- a/doc/raise.n +++ b/doc/raise.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH raise n 3.3 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/scrollbar.n b/doc/scrollbar.n index 4d148af..4b1d4ba 100644 --- a/doc/scrollbar.n +++ b/doc/scrollbar.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH scrollbar n 4.1 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/send.n b/doc/send.n index 2a683d5..e33a504 100644 --- a/doc/send.n +++ b/doc/send.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH send n 4.0 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/spinbox.n b/doc/spinbox.n index e030aa3..2f7e6bd 100644 --- a/doc/spinbox.n +++ b/doc/spinbox.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH spinbox n 8.4 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/text.n b/doc/text.n index ac7803c..6266a04 100644 --- a/doc/text.n +++ b/doc/text.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH text n 8.5 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/tk.n b/doc/tk.n index 1165b67..43ce64d 100644 --- a/doc/tk.n +++ b/doc/tk.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tk n 8.4 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/tk_mac.n b/doc/tk_mac.n index f29ef2f..a1ad758 100644 --- a/doc/tk_mac.n +++ b/doc/tk_mac.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tk::mac n 8.6 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/tkvars.n b/doc/tkvars.n index a80fd54..f872d1f 100644 --- a/doc/tkvars.n +++ b/doc/tkvars.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tkvars n 4.1 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/tkwait.n b/doc/tkwait.n index a31aee7..82d51ba 100644 --- a/doc/tkwait.n +++ b/doc/tkwait.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH tkwait n "" Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/toplevel.n b/doc/toplevel.n index 271d9f1..31f241c 100644 --- a/doc/toplevel.n +++ b/doc/toplevel.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH toplevel n 8.4 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/ttk_Theme.3 b/doc/ttk_Theme.3 index 8031b8a..a42dd38 100644 --- a/doc/ttk_Theme.3 +++ b/doc/ttk_Theme.3 @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH Ttk_CreateTheme 3 8.5 Tk "Tk Themed Widget" .so man.macros .BS diff --git a/doc/ttk_sizegrip.n b/doc/ttk_sizegrip.n index 8b3429e..64d3ef6 100644 --- a/doc/ttk_sizegrip.n +++ b/doc/ttk_sizegrip.n @@ -3,7 +3,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH ttk::sizegrip n 8.5 Tk "Tk Themed Widget" .so man.macros .BS diff --git a/doc/winfo.n b/doc/winfo.n index 5008448..bff4973 100644 --- a/doc/winfo.n +++ b/doc/winfo.n @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH winfo n 4.3 Tk "Tk Built-In Commands" .so man.macros .BS diff --git a/doc/wish.1 b/doc/wish.1 index 93ade0d..f7d97d9 100644 --- a/doc/wish.1 +++ b/doc/wish.1 @@ -4,7 +4,7 @@ '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. -'\" +'\" .TH wish 1 8.0 Tk "Tk Applications" .so man.macros .BS @@ -77,7 +77,7 @@ If there exists a file in the home directory of the user, \fBwish\fR evaluates the file as a Tcl script just before reading the first command from standard input. .PP -If arguments to \fBwish\fR do specify a \fIfileName\fR, then +If arguments to \fBwish\fR do specify a \fIfileName\fR, then \fIfileName\fR is treated as the name of a script file. \fBWish\fR will evaluate the script in \fIfileName\fR (which presumably creates a user interface), then it will respond to events -- cgit v0.12 From 19b6a3db8f95595a28e56f93895d94f334e33e20 Mon Sep 17 00:00:00 2001 From: fvogel Date: Sun, 13 Mar 2016 21:55:59 +0000 Subject: Fixed bug [487861ffff] - cascade with -accelerator looks wrong --- win/tkWinMenu.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/win/tkWinMenu.c b/win/tkWinMenu.c index 4593928..8eede75 100644 --- a/win/tkWinMenu.c +++ b/win/tkWinMenu.c @@ -155,7 +155,7 @@ static void DrawWindowsSystemBitmap(Display *display, Drawable drawable, GC gc, const RECT *rectPtr, int bitmapID, int alignFlags); static void FreeID(WORD commandID); -static char * GetEntryText(TkMenuEntry *mePtr); +static char * GetEntryText(TkMenu *menuPtr, TkMenuEntry *mePtr); static void GetMenuAccelGeometry(TkMenu *menuPtr, TkMenuEntry *mePtr, Tk_Font tkfont, const Tk_FontMetrics *fmPtr, int *widthPtr, @@ -486,6 +486,7 @@ TkpDestroyMenuEntry( static char * GetEntryText( + TkMenu *menuPtr, /* The menu considered. */ TkMenuEntry *mePtr) /* A pointer to the menu entry. */ { char *itemText; @@ -506,7 +507,7 @@ GetEntryText( int i; const char *label = (mePtr->labelPtr == NULL) ? "" : Tcl_GetString(mePtr->labelPtr); - const char *accel = (mePtr->accelPtr == NULL) ? "" + const char *accel = ((menuPtr->menuType == MENUBAR) || (mePtr->accelPtr == NULL)) ? "" : Tcl_GetString(mePtr->accelPtr); const char *p, *next; Tcl_DString itemString; @@ -605,7 +606,7 @@ ReconfigureWindowsMenu( continue; } - itemText = GetEntryText(mePtr); + itemText = GetEntryText(menuPtr, mePtr); if ((menuPtr->menuType == MENUBAR) || (menuPtr->menuFlags & MENU_SYSTEM_MENU)) { Tcl_WinUtfToTChar(itemText, -1, &translatedText); @@ -1502,12 +1503,12 @@ GetMenuAccelGeometry( *heightPtr = fmPtr->linespace; if (mePtr->type == CASCADE_ENTRY) { *widthPtr = 0; - } else if (mePtr->accelPtr == NULL) { - *widthPtr = 0; - } else { + } else if ((menuPtr->menuType != MENUBAR) && (mePtr->accelPtr != NULL)) { const char *accel = Tcl_GetString(mePtr->accelPtr); *widthPtr = Tk_TextWidth(tkfont, accel, mePtr->accelLength); + } else { + *widthPtr = 0; } } @@ -1763,6 +1764,10 @@ DrawMenuEntryAccelerator( int leftEdge = x + mePtr->indicatorSpace + mePtr->labelWidth; const char *accel; + if (menuPtr->menuType == MENUBAR) { + return; + } + if (mePtr->accelPtr != NULL) { accel = Tcl_GetString(mePtr->accelPtr); } else { -- cgit v0.12 From 970271359dd6eaa98def179692955efc9d387970 Mon Sep 17 00:00:00 2001 From: "jan.nijtmans" Date: Mon, 14 Mar 2016 13:31:25 +0000 Subject: Excess spacing in test-suite --- tests/bell.test | 2 +- tests/bind.test | 312 ++++++++++++++++++++++----------------------- tests/bitmap.test | 6 +- tests/border.test | 22 ++-- tests/button.test | 182 +++++++++++++------------- tests/canvImg.test | 10 +- tests/canvMoveto.test | 2 +- tests/canvRect.test | 12 +- tests/canvas.test | 12 +- tests/clipboard.test | 2 +- tests/clrpick.test | 2 +- tests/cmds.test | 2 +- tests/color.test | 2 +- tests/config.test | 34 ++--- tests/cursor.test | 2 +- tests/entry.test | 304 +++++++++++++++++++++---------------------- tests/event.test | 8 +- tests/filebox.test | 2 +- tests/focus.test | 22 ++-- tests/font.test | 172 ++++++++++++------------- tests/frame.test | 8 +- tests/geometry.test | 2 +- tests/image.test | 40 +++--- tests/imgPhoto.test | 42 +++--- tests/listbox.test | 8 +- tests/main.test | 2 +- tests/menu.test | 72 +++++------ tests/menuDraw.test | 12 +- tests/menubut.test | 18 +-- tests/message.test | 106 +++++++-------- tests/msgbox.test | 90 ++++++------- tests/option.file1 | 2 +- tests/option.file3 | 2 +- tests/option.test | 2 +- tests/pack.test | 2 +- tests/panedwindow.test | 116 ++++++++--------- tests/place.test | 2 +- tests/raise.test | 6 +- tests/safe.test | 6 +- tests/scale.test | 2 +- tests/scrollbar.test | 20 +-- tests/select.test | 8 +- tests/send.test | 4 +- tests/spinbox.test | 306 ++++++++++++++++++++++---------------------- tests/text.test | 52 ++++---- tests/textDisp.test | 14 +- tests/textImage.test | 14 +- tests/textIndex.test | 20 +-- tests/textMark.test | 2 +- tests/textTag.test | 228 ++++++++++++++++----------------- tests/textWind.test | 2 +- tests/ttk/combobox.test | 2 +- tests/ttk/image.test | 2 +- tests/ttk/labelframe.test | 2 +- tests/ttk/panedwindow.test | 6 +- tests/ttk/scrollbar.test | 8 +- tests/ttk/spinbox.test | 4 +- tests/ttk/treetags.test | 6 +- tests/ttk/ttk.test | 2 +- tests/ttk/validate.test | 2 +- tests/unixButton.test | 14 +- tests/unixEmbed.test | 38 +++--- tests/unixFont.test | 6 +- tests/unixMenu.test | 156 +++++++++++------------ tests/unixWm.test | 8 +- tests/visual_bb.test | 12 +- tests/winDialog.test | 12 +- tests/winFont.test | 22 ++-- tests/winMenu.test | 6 +- tests/winWm.test | 6 +- 70 files changed, 1318 insertions(+), 1318 deletions(-) diff --git a/tests/bell.test b/tests/bell.test index 4f7df97..bbafeac 100644 --- a/tests/bell.test +++ b/tests/bell.test @@ -15,7 +15,7 @@ test bell-1.1 {bell command} -body { } -returnCodes {error} -result {bad option "a": must be -displayof or -nice} test bell-1.2 {bell command} -body { - bell a b + bell a b } -returnCodes {error} -result {bad option "a": must be -displayof or -nice} test bell-1.3 {bell command} -body { diff --git a/tests/bind.test b/tests/bind.test index 474771d..f38f03c 100644 --- a/tests/bind.test +++ b/tests/bind.test @@ -69,10 +69,10 @@ test bind-1.7 {bind command} -body { } -result {test script more text} test bind-1.8 {bind command} -body { - bind .t {test script} + bind .t {test script} } -returnCodes error -result {bad event type or keysym "gorp"} test bind-1.9 {bind command} -body { - catch {bind .t {test script}} + catch {bind .t {test script}} bind .t } -result {} test bind-1.10 {bind command} -body { @@ -133,10 +133,10 @@ test bind-2.8 {bindtags command} -body { test bind-2.9 {bindtags command} -body { frame .t.f bindtags .t.f {a b c} - bindtags .t.f "\{" + bindtags .t.f "\{" } -cleanup { destroy .t.f -} -returnCodes error -result {unmatched open brace in list} +} -returnCodes error -result {unmatched open brace in list} test bind-2.10 {bindtags command} -body { frame .t.f bindtags .t.f {a b c} @@ -148,10 +148,10 @@ test bind-2.10 {bindtags command} -body { test bind-2.11 {bindtags command} -body { frame .t.f bindtags .t.f {a b c} - bindtags .t.f "a .gorp b" + bindtags .t.f "a .gorp b" } -cleanup { destroy .t.f -} -returnCodes ok +} -returnCodes ok test bind-2.12 {bindtags command} -body { frame .t.f bindtags .t.f {a b c} @@ -191,7 +191,7 @@ test bind-4.1 {TkBindEventProc procedure} -setup { bind {a b} {lappend x "%W enter {a b}"} bind .t {lappend x "%W enter .t"} bind .t.f {lappend x "%W enter .t.f"} - + event generate .t.f return $x } -cleanup { @@ -211,9 +211,9 @@ test bind-4.2 {TkBindEventProc procedure} -setup { bind {a b} {lappend x "%W enter {a b}"} bind .t {lappend x "%W enter .t"} bind .t.f {lappend x "%W enter .t.f"} - + bindtags .t.f {.t.f {a b} xyz} - event generate .t.f + event generate .t.f return $x } -cleanup { destroy .t.f @@ -227,7 +227,7 @@ test bind-4.3 {TkBindEventProc procedure} -body { bind xyz {lappend x "%W enter xyz"} bind {a b} {lappend x "%W enter {a b}"} bind .t {lappend x "%W enter .t"} - + event generate .t return $x } -cleanup { @@ -247,7 +247,7 @@ test bind-4.4 {TkBindEventProc procedure} -setup { bind xyz {lappend x "%W enter xyz"} bind {a b} {lappend x "%W enter {a b}"} bind .t {lappend x "%W enter .t"} - + bindtags .t.f {.t.f .t.f2 .t.f3} bind .t.f {lappend x "%W enter .t.f"} bind .t.f3 {lappend x "%W enter .t.f3"} @@ -271,7 +271,7 @@ test bind-4.5 {TkBindEventProc procedure} -setup { bind {a b} {lappend x "%W enter {a b}"} bind .t {lappend x "%W enter .t"} bindtags .t.f {a b c d e f g h i j k l m n o p q r s t u v w x y z} - + event generate .t.f } -cleanup { destroy .t.f @@ -375,7 +375,7 @@ test bind-10.2 {Tk_GetBinding procedure} -body { } -result {Test} test bind-11.1 {Tk_GetAllBindings procedure} -body { - frame .t.f + frame .t.f foreach i "! a \\\{ ~ <> " { bind .t.f $i Test } @@ -384,7 +384,7 @@ test bind-11.1 {Tk_GetAllBindings procedure} -body { destroy .t.f } -result {! <> a \{ ~} test bind-11.2 {Tk_GetAllBindings procedure} -body { - frame .t.f + frame .t.f foreach i " <1>" { bind .t.f $i Test } @@ -393,7 +393,7 @@ test bind-11.2 {Tk_GetAllBindings procedure} -body { destroy .t.f } -result { } test bind-11.3 {Tk_GetAllBindings procedure} -body { - frame .t.f + frame .t.f foreach i " abcd ab" { bind .t.f $i Test } @@ -427,7 +427,7 @@ test bind-13.1 {Tk_BindEvent procedure} -setup { bind Test : {lappend x "%W %K Test :"} bind all _ {lappend x "%W %K all _"} bind .t.f : {lappend x "%W %K .t.f :"} - + event generate .t.f event generate .t.f event generate .t.f @@ -450,7 +450,7 @@ test bind-13.2 {Tk_BindEvent procedure} -setup { bind Test {lappend x "%W %K Test press any"; break} bind all {continue; lappend x "%W %K all press any"} bind .t.f : {lappend x "%W %K .t.f pressed colon"} - + event generate .t.f return $x } -cleanup { @@ -506,11 +506,11 @@ test bind-13.5 {Tk_BindEvent procedure} -body { frame .t.g -gorp foo } -cleanup { bind all {} -} -returnCodes error -result {unknown option "-gorp"} +} -returnCodes error -result {unknown option "-gorp"} test bind-13.6 {Tk_BindEvent procedure} -body { bind all {lappend x "%W destroyed"} set x {} - catch {frame .t.g -gorp foo} + catch {frame .t.g -gorp foo} return $x } -cleanup { bind all {} @@ -591,10 +591,10 @@ test bind-13.11 {Tk_BindEvent procedure: collapse Motions} -setup { set x {} } -body { bind .t.f "lappend x Motion%#(%x,%y)" - event generate .t.f -serial 100 -x 100 -y 200 -when tail + event generate .t.f -serial 100 -x 100 -y 200 -when tail update event generate .t.f -serial 101 -x 200 -y 300 -when tail - event generate .t.f -serial 102 -x 300 -y 400 -when tail + event generate .t.f -serial 102 -x 300 -y 400 -when tail update return $x } -cleanup { @@ -608,10 +608,10 @@ test bind-13.12 {Tk_BindEvent procedure: collapse repeating modifiers} -setup { } -body { bind .t.f "lappend x %K%#" bind .t.f "lappend x %K%#" - event generate .t.f -serial 100 -when tail - event generate .t.f -serial 101 -when tail - event generate .t.f -serial 102 -when tail - event generate .t.f -serial 103 -when tail + event generate .t.f -serial 100 -when tail + event generate .t.f -serial 101 -when tail + event generate .t.f -serial 102 -when tail + event generate .t.f -serial 103 -when tail update } -cleanup { destroy .t.f @@ -847,7 +847,7 @@ test bind-13.27 {Tk_BindEvent procedure: no detail virtual pattern list} -setup set x {} } -body { bind .t.f {set x Button-2} - event generate .t.f + event generate .t.f return $x } -cleanup { destroy .t.f @@ -1011,7 +1011,7 @@ test bind-13.43 {Tk_BindEvent procedure: break in script} -setup { } -result {b1} test bind-13.45 {Tk_BindEvent procedure: error in script} -setup { proc bgerror msg { - global x + global x lappend x $msg } frame .t.f -class Test -width 150 -height 100 @@ -1200,7 +1200,7 @@ test bind-15.11 {MatchPatterns procedure, modifier checks} -setup { } -cleanup { destroy .t.f } -result {0} -test bind-15.12 {MatchPatterns procedure, ignore modifier presses and releases} -constraints { +test bind-15.12 {MatchPatterns procedure, ignore modifier presses and releases} -constraints { nonPortable } -setup { frame .t.f -class Test -width 150 -height 100 @@ -1241,7 +1241,7 @@ test bind-15.14 {MatchPatterns procedure, checking "nearby"} -setup { } -body { bind .t.f {set x 1} set x 0 - event generate .t.f + event generate .t.f event generate .t.f event generate .t.f -x 30 -y 40 event generate .t.f -x 31 -y 39 @@ -1258,7 +1258,7 @@ test bind-15.15 {MatchPatterns procedure, checking "nearby"} -setup { } -body { bind .t.f {set x 1} set x 0 - event generate .t.f + event generate .t.f event generate .t.f event generate .t.f -x 30 -y 40 event generate .t.f -x 29 -y 41 @@ -1275,7 +1275,7 @@ test bind-15.16 {MatchPatterns procedure, checking "nearby"} -setup { } -body { bind .t.f {set x 1} set x 0 - event generate .t.f + event generate .t.f event generate .t.f event generate .t.f -x 30 -y 40 event generate .t.f -x 40 -y 40 @@ -1292,7 +1292,7 @@ test bind-15.17 {MatchPatterns procedure, checking "nearby"} -setup { } -body { bind .t.f {set x 1} set x 0 - event generate .t.f + event generate .t.f event generate .t.f event generate .t.f -x 30 -y 40 event generate .t.f -x 20 -y 40 @@ -1309,7 +1309,7 @@ test bind-15.18 {MatchPatterns procedure, checking "nearby"} -setup { } -body { bind .t.f {set x 1} set x 0 - event generate .t.f + event generate .t.f event generate .t.f event generate .t.f -x 30 -y 40 event generate .t.f -x 30 -y 30 @@ -1326,7 +1326,7 @@ test bind-15.19 {MatchPatterns procedure, checking "nearby"} -setup { } -body { bind .t.f {set x 1} set x 0 - event generate .t.f + event generate .t.f event generate .t.f event generate .t.f -x 30 -y 40 event generate .t.f -x 30 -y 50 @@ -1343,7 +1343,7 @@ test bind-15.20 {MatchPatterns procedure, checking "nearby"} -setup { } -body { bind .t.f {set x 1} set x 0 - event generate .t.f + event generate .t.f event generate .t.f event generate .t.f -time 300 event generate .t.f -time 700 @@ -1360,7 +1360,7 @@ test bind-15.21 {MatchPatterns procedure, checking "nearby"} -setup { } -body { bind .t.f {set x 1} set x 0 - event generate .t.f + event generate .t.f event generate .t.f event generate .t.f -time 300 event generate .t.f -time 900 @@ -2017,7 +2017,7 @@ test bind-16.34 {ExpandPercents procedure} -setup { destroy .t.f } -result {781 632} test bind-16.35 {ExpandPercents procedure} -constraints { - nonPortable + nonPortable } -setup { frame .t.f -class Test -width 150 -height 100 pack .t.f @@ -2242,7 +2242,7 @@ test bind-17.6 {event command: add with error} -body { event add <> abc <1> } -cleanup { event delete <> -} -returnCodes error -result {bad event type or keysym "xyz"} +} -returnCodes error -result {bad event type or keysym "xyz"} test bind-17.7 {event command: add with error} -body { event delete <> catch {event add <> abc <1>} @@ -2335,7 +2335,7 @@ test bind-18.1 {CreateVirtualEvent procedure: GetVirtualEventUid} -body { test bind-18.2 {CreateVirtualEvent procedure: FindSequence} -body { event add <> } -returnCodes error -result {bad event type or keysym "Ctrl"} -test bind-18.3 {CreateVirtualEvent procedure: new physical} -body { +test bind-18.3 {CreateVirtualEvent procedure: new physical} -body { event delete <> event add <> event info <> @@ -2344,7 +2344,7 @@ test bind-18.3 {CreateVirtualEvent procedure: new physical} -body { } -result {} test bind-18.4 {CreateVirtualEvent procedure: duplicate physical} -body { event delete <> - event add <> + event add <> event add <> event info <> } -cleanup { @@ -2415,13 +2415,13 @@ test bind-19.7 {DeleteVirtualEvent procedure: owns 1, delete all} -body { foreach p [event info] {event delete $p} event add <> event delete <> - event info + event info } -result {} test bind-19.8 {DeleteVirtualEvent procedure: owns 1, delete 1} -body { foreach p [event info] {event delete $p} event add <> event delete <> - event info + event info } -result {} test bind-19.9 {DeleteVirtualEvent procedure: owns many, delete all} -body { foreach p [event info] {event delete $p} @@ -2473,7 +2473,7 @@ test bind-19.12 {DeleteVirtualEvent procedure: owned by 1, first in chain} -setu event generate .t.f event generate .t.f event generate .t.f - event delete <> + event delete <> event generate .t.f event generate .t.f event generate .t.f @@ -2540,7 +2540,7 @@ test bind-19.14 {DeleteVirtualEvent procedure: owned by 1, last in chain} -setup event generate .t.f event generate .t.f event generate .t.f - event delete <> + event delete <> event generate .t.f event generate .t.f event generate .t.f @@ -2576,7 +2576,7 @@ test bind-19.15 {DeleteVirtualEvent procedure: owned by many, first} -setup { event generate .t.g event generate .t.h event generate .t.h - event delete <> + event delete <> event generate .t.f event generate .t.f event generate .t.g @@ -2648,7 +2648,7 @@ test bind-19.17 {DeleteVirtualEvent procedure: owned by many, last} -setup { event generate .t.g event generate .t.h event generate .t.h - event delete <> + event delete <> event generate .t.f event generate .t.f event generate .t.g @@ -3385,7 +3385,7 @@ test bind-22.55 {HandleEventGenerate: options -override xyz} -setup { set x {} } -body { bind .t.f "lappend x %o" - event generate .t.f -override xyz + event generate .t.f -override xyz } -cleanup { destroy .t.f } -returnCodes error -result {expected boolean value but got "xyz"} @@ -3398,7 +3398,7 @@ test bind-22.56 {HandleEventGenerate: options -override 1} -setup { set x {} } -body { bind .t.f "lappend x %o" - event generate .t.f -override 1 + event generate .t.f -override 1 return $x } -cleanup { destroy .t.f @@ -3412,7 +3412,7 @@ test bind-22.57 {HandleEventGenerate: options -override 1} -setup { set x {} } -body { bind .t.f "lappend x %o" - event generate .t.f -override 1 + event generate .t.f -override 1 return $x } -cleanup { destroy .t.f @@ -3426,7 +3426,7 @@ test bind-22.58 {HandleEventGenerate: options -override 1} -setup { set x {} } -body { bind .t.f "lappend x %o" - event generate .t.f -override 1 + event generate .t.f -override 1 return $x } -cleanup { destroy .t.f @@ -3440,7 +3440,7 @@ test bind-22.59 {HandleEventGenerate: options -override 1} -setup { set x {} } -body { bind .t.f "lappend x %k" - event generate .t.f -override 1 + event generate .t.f -override 1 } -cleanup { destroy .t.f } -returnCodes error -result { event doesn't accept "-override" option} @@ -3453,7 +3453,7 @@ test bind-22.60 {HandleEventGenerate: options -place xyz} -setup { set x {} } -body { bind .t.f "lappend x %p" - event generate .t.f -place xyz + event generate .t.f -place xyz } -cleanup { destroy .t.f } -returnCodes error -result {bad -place value "xyz": must be PlaceOnTop, or PlaceOnBottom} @@ -3466,7 +3466,7 @@ test bind-22.61 {HandleEventGenerate: options -place PlaceOnTop} -se set x {} } -body { bind .t.f "lappend x %p" - event generate .t.f -place PlaceOnTop + event generate .t.f -place PlaceOnTop return $x } -cleanup { destroy .t.f @@ -3480,7 +3480,7 @@ test bind-22.62 {HandleEventGenerate: options -place PlaceOnTop} -setup { set x {} } -body { bind .t.f "lappend x %k" - event generate .t.f -place PlaceOnTop + event generate .t.f -place PlaceOnTop } -cleanup { destroy .t.f } -returnCodes error -result { event doesn't accept "-place" option} @@ -3493,7 +3493,7 @@ test bind-22.63 {HandleEventGenerate: options -root .xyz} -setup { set x {} } -body { bind .t.f "lappend x %R" - event generate .t.f -root .xyz + event generate .t.f -root .xyz } -cleanup { destroy .t.f } -returnCodes error -result {bad window path name ".xyz"} @@ -3506,7 +3506,7 @@ test bind-22.64 {HandleEventGenerate: options -root .t} -setup { set x {} } -body { bind .t.f "lappend x %R" - event generate .t.f -root .t + event generate .t.f -root .t expr {[winfo id .t] eq $x} } -cleanup { destroy .t.f @@ -3520,7 +3520,7 @@ test bind-22.65 {HandleEventGenerate: options -root xyz} -setup { set x {} } -body { bind .t.f "lappend x %R" - event generate .t.f -root xyz + event generate .t.f -root xyz } -cleanup { destroy .t.f } -returnCodes error -result {bad window name/identifier "xyz"} @@ -3533,7 +3533,7 @@ test bind-22.66 {HandleEventGenerate: options -root [winfo id .t]} -setup set x {} } -body { bind .t.f "lappend x %R" - event generate .t.f -root [winfo id .t] + event generate .t.f -root [winfo id .t] expr {[winfo id .t] eq $x} } -cleanup { destroy .t.f @@ -3547,7 +3547,7 @@ test bind-22.67 {HandleEventGenerate: options