/* * tkCanvLine.c -- * * This file implements line items for canvas widgets. * * Copyright (c) 1991-1994 The Regents of the University of California. * Copyright (c) 1994-1997 Sun Microsystems, Inc. * Copyright (c) 1998-1999 by Scriptics Corporation. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tkInt.h" #include "tkCanvas.h" /* * The structure below defines the record for each line item. */ typedef enum { ARROWS_NONE, ARROWS_FIRST, ARROWS_LAST, ARROWS_BOTH } Arrows; typedef struct LineItem { Tk_Item header; /* Generic stuff that's the same for all * types. MUST BE FIRST IN STRUCTURE. */ Tk_Outline outline; /* Outline structure */ Tk_Canvas canvas; /* Canvas containing item. Needed for parsing * arrow shapes. */ int numPoints; /* Number of points in line (always >= 0). */ double *coordPtr; /* Pointer to malloc-ed array containing x- * and y-coords of all points in line. * X-coords are even-valued indices, y-coords * are corresponding odd-valued indices. If * the line has arrowheads then the first and * last points have been adjusted to refer to * the necks of the arrowheads rather than * their tips. The actual endpoints are stored * in the *firstArrowPtr and *lastArrowPtr, if * they exist. */ int capStyle; /* Cap style for line. */ int joinStyle; /* Join style for line. */ GC arrowGC; /* Graphics context for drawing arrowheads. */ Arrows arrow; /* Indicates whether or not to draw arrowheads: * "none", "first", "last", or "both". */ float arrowShapeA; /* Distance from tip of arrowhead to center. */ float arrowShapeB; /* Distance from tip of arrowhead to trailing * point, measured along shaft. */ float arrowShapeC; /* Distance of trailing points from outside * edge of shaft. */ double *firstArrowPtr; /* Points to array of PTS_IN_ARROW points * describing polygon for arrowhead at first * point in line. First point of arrowhead is * tip. Malloc'ed. NULL means no arrowhead at * first point. */ double *lastArrowPtr; /* Points to polygon for arrowhead at last * point in line (PTS_IN_ARROW points, first * of which is tip). Malloc'ed. NULL means no * arrowhead at last point. */ const Tk_SmoothMethod *smooth; /* Non-zero means draw line smoothed (i.e. * with Bezier splines). */ int splineSteps; /* Number of steps in each spline segment. */ } LineItem; /* * Number of points in an arrowHead: */ #define PTS_IN_ARROW 6 /* * Prototypes for functions defined in this file: */ static int ArrowheadPostscript(Tcl_Interp *interp, Tk_Canvas canvas, LineItem *linePtr, double *arrowPtr, Tcl_Obj *psObj); static void ComputeLineBbox(Tk_Canvas canvas, LineItem *linePtr); static int ConfigureLine(Tcl_Interp *interp, Tk_Canvas canvas, Tk_Item *itemPtr, int objc, Tcl_Obj *const objv[], int flags); static int ConfigureArrows(Tk_Canvas canvas, LineItem *linePtr); static int CreateLine(Tcl_Interp *interp, Tk_Canvas canvas, struct Tk_Item *itemPtr, int objc, Tcl_Obj *const objv[]); static void DeleteLine(Tk_Canvas canvas, Tk_Item *itemPtr, Display *display); static void DisplayLine(Tk_Canvas canvas, Tk_Item *itemPtr, Display *display, Drawable dst, int x, int y, int width, int height); static int GetLineIndex(Tcl_Interp *interp, Tk_Canvas canvas, Tk_Item *itemPtr, Tcl_Obj *obj, int *indexPtr); static int LineCoords(Tcl_Interp *interp, Tk_Canvas canvas, Tk_Item *itemPtr, int objc, Tcl_Obj *const objv[]); static void LineDeleteCoords(Tk_Canvas canvas, Tk_Item *itemPtr, int first, int last); static void LineInsert(Tk_Canvas canvas, Tk_Item *itemPtr, int beforeThis, Tcl_Obj *obj); static int LineToArea(Tk_Canvas canvas, Tk_Item *itemPtr, double *rectPtr); static double LineToPoint(Tk_Canvas canvas, Tk_Item *itemPtr, double *coordPtr); static int LineToPostscript(Tcl_Interp *interp, Tk_Canvas canvas, Tk_Item *itemPtr, int prepass); static int ArrowParseProc(ClientData clientData, Tcl_Interp *interp, Tk_Window tkwin, const char *value, char *recordPtr, int offset); static const char * ArrowPrintProc(ClientData clientData, Tk_Window tkwin, char *recordPtr, int offset, Tcl_FreeProc **freeProcPtr); static int ParseArrowShape(ClientData clientData, Tcl_Interp *interp, Tk_Window tkwin, const char *value, char *recordPtr, int offset); static const char * PrintArrowShape(ClientData clientData, Tk_Window tkwin, char *recordPtr, int offset, Tcl_FreeProc **freeProcPtr); static void ScaleLine(Tk_Canvas canvas, Tk_Item *itemPtr, double originX, double originY, double scaleX, double scaleY); static void TranslateLine(Tk_Canvas canvas, Tk_Item *itemPtr, double deltaX, double deltaY); /* * Information used for parsing configuration specs. If you change any of the * default strings, be sure to change the corresponding default values in * CreateLine. */ static const Tk_CustomOption arrowShapeOption = { ParseArrowShape, PrintArrowShape, NULL }; static const Tk_CustomOption arrowOption = { ArrowParseProc, ArrowPrintProc, NULL }; static const Tk_CustomOption smoothOption = { TkSmoothParseProc, TkSmoothPrintProc, NULL }; static const Tk_CustomOption stateOption = { TkStateParseProc, TkStatePrintProc, INT2PTR(2) }; static const Tk_CustomOption tagsOption = { Tk_CanvasTagsParseProc, Tk_CanvasTagsPrintProc, NULL }; static const Tk_CustomOption dashOption = { TkCanvasDashParseProc, TkCanvasDashPrintProc, NULL }; static const Tk_CustomOption offsetOption = { TkOffsetParseProc, TkOffsetPrintProc, INT2PTR(TK_OFFSET_RELATIVE|TK_OFFSET_INDEX) }; static const Tk_CustomOption pixelOption = { TkPixelParseProc, TkPixelPrintProc, NULL }; static const Tk_ConfigSpec configSpecs[] = { {TK_CONFIG_CUSTOM, "-activedash", NULL, NULL, NULL, Tk_Offset(LineItem, outline.activeDash), TK_CONFIG_NULL_OK, &dashOption}, {TK_CONFIG_COLOR, "-activefill", NULL, NULL, NULL, Tk_Offset(LineItem, outline.activeColor), TK_CONFIG_NULL_OK, NULL}, {TK_CONFIG_BITMAP, "-activestipple", NULL, NULL, NULL, Tk_Offset(LineItem, outline.activeStipple), TK_CONFIG_NULL_OK, NULL}, {TK_CONFIG_CUSTOM, "-activewidth", NULL, NULL, "0.0", Tk_Offset(LineItem, outline.activeWidth), TK_CONFIG_DONT_SET_DEFAULT, &pixelOption}, {TK_CONFIG_CUSTOM, "-arrow", NULL, NULL, "none", Tk_Offset(LineItem, arrow), TK_CONFIG_DONT_SET_DEFAULT, &arrowOption}, {TK_CONFIG_CUSTOM, "-arrowshape", NULL, NULL, "8 10 3", Tk_Offset(LineItem, arrowShapeA), TK_CONFIG_DONT_SET_DEFAULT, &arrowShapeOption}, {TK_CONFIG_CAP_STYLE, "-capstyle", NULL, NULL, "butt", Tk_Offset(LineItem, capStyle), TK_CONFIG_DONT_SET_DEFAULT, NULL}, {TK_CONFIG_COLOR, "-fill", NULL, NULL, "black", Tk_Offset(LineItem, outline.color), TK_CONFIG_NULL_OK, NULL}, {TK_CONFIG_CUSTOM, "-dash", NULL, NULL, NULL, Tk_Offset(LineItem, outline.dash), TK_CONFIG_NULL_OK, &dashOption}, {TK_CONFIG_PIXELS, "-dashoffset", NULL, NULL, "0", Tk_Offset(LineItem, outline.offset), TK_CONFIG_DONT_SET_DEFAULT, NULL}, {TK_CONFIG_CUSTOM, "-disableddash", NULL, NULL, NULL, Tk_Offset(LineItem, outline.disabledDash), TK_CONFIG_NULL_OK, &dashOption}, {TK_CONFIG_COLOR, "-disabledfill", NULL, NULL, NULL, Tk_Offset(LineItem, outline.disabledColor), TK_CONFIG_NULL_OK, NULL}, {TK_CONFIG_BITMAP, "-disabledstipple", NULL, NULL, NULL, Tk_Offset(LineItem, outline.disabledStipple), TK_CONFIG_NULL_OK, NULL}, {TK_CONFIG_CUSTOM, "-disabledwidth", NULL, NULL, "0.0", Tk_Offset(LineItem, outline.disabledWidth), TK_CONFIG_DONT_SET_DEFAULT, &pixelOption}, {TK_CONFIG_JOIN_STYLE, "-joinstyle", NULL, NULL, "round", Tk_Offset(LineItem, joinStyle), TK_CONFIG_DONT_SET_DEFAULT, NULL}, {TK_CONFIG_CUSTOM, "-offset", NULL, NULL, "0,0", Tk_Offset(LineItem, outline.tsoffset), TK_CONFIG_DONT_SET_DEFAULT, &offsetOption}, {TK_CONFIG_CUSTOM, "-smooth", NULL, NULL, "0", Tk_Offset(LineItem, smooth), TK_CONFIG_DONT_SET_DEFAULT, &smoothOption}, {TK_CONFIG_INT, "-splinesteps", NULL, NULL, "12", Tk_Offset(LineItem, splineSteps), TK_CONFIG_DONT_SET_DEFAULT, NULL}, {TK_CONFIG_CUSTOM, "-state", NULL, NULL, NULL, Tk_Offset(Tk_Item, state), TK_CONFIG_NULL_OK, &stateOption}, {TK_CONFIG_BITMAP, "-stipple", NULL, NULL, NULL, Tk_Offset(LineItem, outline.stipple), TK_CONFIG_NULL_OK, NULL}, {TK_CONFIG_CUSTOM, "-tags", NULL, NULL, NULL, 0, TK_CONFIG_NULL_OK, &tagsOption}, {TK_CONFIG_CUSTOM, "-width", NULL, NULL, "1.0", Tk_Offset(LineItem, outline.width), TK_CONFIG_DONT_SET_DEFAULT, &pixelOption}, {TK_CONFIG_END, NULL, NULL, NULL, NULL, 0, 0, NULL} }; /* * The structures below defines the line item type by means of functions that * can be invoked by generic item code. */ Tk_ItemType tkLineType = { "line", /* name */ sizeof(LineItem), /* itemSize */ CreateLine, /* createProc */ configSpecs, /* configSpecs */ ConfigureLine, /* configureProc */ LineCoords, /* coordProc */ DeleteLine, /* deleteProc */ DisplayLine, /* displayProc */ TK_CONFIG_OBJS | TK_MOVABLE_POINTS, /* flags */ LineToPoint, /* pointProc */ LineToArea, /* areaProc */ LineToPostscript, /* postscriptProc */ ScaleLine, /* scaleProc */ TranslateLine, /* translateProc */ GetLineIndex, /* indexProc */ NULL, /* icursorProc */ NULL, /* selectionProc */ LineInsert, /* insertProc */ LineDeleteCoords, /* dTextProc */ NULL, /* nextPtr */ NULL, 0, NULL, NULL }; /* * The definition below determines how large are static arrays used to hold * spline points (splines larger than this have to have their arrays * malloc-ed). */ #define MAX_STATIC_POINTS 200 /* *-------------------------------------------------------------- * * CreateLine -- * * This function is invoked to create a new line item in a canvas. * * Results: * A standard Tcl return value. If an error occurred in creating the * item, then an error message is left in the interp's result; in this * case itemPtr is left uninitialized, so it can be safely freed by the * caller. * * Side effects: * A new line item is created. * *-------------------------------------------------------------- */ static int CreateLine( Tcl_Interp *interp, /* Interpreter for error reporting. */ Tk_Canvas canvas, /* Canvas to hold new item. */ Tk_Item *itemPtr, /* Record to hold new item; header has been * initialized by caller. */ int objc, /* Number of arguments in objv. */ Tcl_Obj *const objv[]) /* Arguments describing line. */ { LineItem *linePtr = (LineItem *) itemPtr; int i; if (objc == 0) { Tcl_Panic("canvas did not pass any coords"); } /* * Carry out initialization that is needed to set defaults and to allow * proper cleanup after errors during the the remainder of this function. */ Tk_CreateOutline(&linePtr->outline); linePtr->canvas = canvas; linePtr->numPoints = 0; linePtr->coordPtr = NULL; linePtr->capStyle = CapButt; linePtr->joinStyle = JoinRound; linePtr->arrowGC = None; linePtr->arrow = ARROWS_NONE; linePtr->arrowShapeA = (float)8.0; linePtr->arrowShapeB = (float)10.0; linePtr->arrowShapeC = (float)3.0; linePtr->firstArrowPtr = NULL; linePtr->lastArrowPtr = NULL; linePtr->smooth = NULL; linePtr->splineSteps = 12; /* * Count the number of points and then parse them into a point array. * Leading arguments are assumed to be points if they start with a digit * or a minus sign followed by a digit. */ for (i = 1; i < objc; i++) { const char *arg = Tcl_GetString(objv[i]); if ((arg[0] == '-') && (arg[1] >= 'a') && (arg[1] <= 'z')) { break; } } if (LineCoords(interp, canvas, itemPtr, i, objv) != TCL_OK) { goto error; } if (ConfigureLine(interp, canvas, itemPtr, objc-i, objv+i, 0) == TCL_OK) { return TCL_OK; } error: DeleteLine(canvas, itemPtr, Tk_Display(Tk_CanvasTkwin(canvas))); return TCL_ERROR; } /* *-------------------------------------------------------------- * * LineCoords -- * * This function is invoked to process the "coords" widget command on * lines. See the user documentation for details on what it does. * * Results: * Returns TCL_OK or TCL_ERROR, and sets the interp's result. * * Side effects: * The coordinates for the given item may be changed. * *-------------------------------------------------------------- */ static int LineCoords( Tcl_Interp *interp, /* Used for error reporting. */ Tk_Canvas canvas, /* Canvas containing item. */ Tk_Item *itemPtr, /* Item whose coordinates are to be read or * modified. */ int objc, /* Number of coordinates supplied in objv. */ Tcl_Obj *const objv[]) /* Array of coordinates: x1, y1, x2, y2, ... */ { LineItem *linePtr = (LineItem *) itemPtr; int i, numPoints; double *coordPtr; if (objc == 0) { int numCoords; Tcl_Obj *subobj, *obj = Tcl_NewObj(); numCoords = 2*linePtr->numPoints; if (linePtr->firstArrowPtr != NULL) { coordPtr = linePtr->firstArrowPtr; } else { coordPtr = linePtr->coordPtr; } for (i = 0; i < numCoords; i++, coordPtr++) { if (i == 2) { coordPtr = linePtr->coordPtr+2; } if ((linePtr->lastArrowPtr != NULL) && (i == (numCoords-2))) { coordPtr = linePtr->lastArrowPtr; } subobj = Tcl_NewDoubleObj(*coordPtr); Tcl_ListObjAppendElement(interp, obj, subobj); } Tcl_SetObjResult(interp, obj); return TCL_OK; } if (objc == 1) { if (Tcl_ListObjGetElements(interp, objv[0], &objc, (Tcl_Obj ***) &objv) != TCL_OK) { return TCL_ERROR; } } if (objc & 1) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "wrong # coordinates: expected an even number, got %d", objc)); Tcl_SetErrorCode(interp, "TK", "CANVAS", "COORDS", "LINE", NULL); return TCL_ERROR; } else if (objc < 4) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "wrong # coordinates: expected at least 4, got %d", objc)); Tcl_SetErrorCode(interp, "TK", "CANVAS", "COORDS", "LINE", NULL); return TCL_ERROR; } numPoints = objc/2; if (linePtr->numPoints != numPoints) { coordPtr = ckalloc(sizeof(double) * objc); if (linePtr->coordPtr != NULL) { ckfree(linePtr->coordPtr); } linePtr->coordPtr = coordPtr; linePtr->numPoints = numPoints; } coordPtr = linePtr->coordPtr; for (i = 0; i < objc ; i++) { if (Tk_CanvasGetCoordFromObj(interp, canvas, objv[i], coordPtr++) != TCL_OK) { return TCL_ERROR; } } /* * Update arrowheads by throwing away any existing arrow-head information * and calling ConfigureArrows to recompute it. */ if (linePtr->firstArrowPtr != NULL) { ckfree(linePtr->firstArrowPtr); linePtr->firstArrowPtr = NULL; } if (linePtr->lastArrowPtr != NULL) { ckfree(linePtr->lastArrowPtr); linePtr->lastArrowPtr = NULL; } if (linePtr->arrow != ARROWS_NONE) { ConfigureArrows(canvas, linePtr); } ComputeLineBbox(canvas, linePtr); return TCL_OK; } /* *-------------------------------------------------------------- * * ConfigureLine -- * * This function is invoked to configure various aspects of a line item * such as its background color. * * Results: * A standard Tcl result code. If an error occurs, then an error message * is left in the interp's result. * * Side effects: * Configuration information, such as colors and stipple patterns, may be * set for itemPtr. * *-------------------------------------------------------------- */ static int ConfigureLine( Tcl_Interp *interp, /* Used for error reporting. */ Tk_Canvas canvas, /* Canvas containing itemPtr. */ Tk_Item *itemPtr, /* Line item to reconfigure. */ int objc, /* Number of elements in objv. */ Tcl_Obj *const objv[], /* Arguments describing things to configure. */ int flags) /* Flags to pass to Tk_ConfigureWidget. */ { LineItem *linePtr = (LineItem *) itemPtr; XGCValues gcValues; GC newGC, arrowGC; unsigned long mask; Tk_Window tkwin; Tk_State state; tkwin = Tk_CanvasTkwin(canvas); if (TCL_OK != Tk_ConfigureWidget(interp, tkwin, configSpecs, objc, (const char **) objv, (char *) linePtr, flags|TK_CONFIG_OBJS)) { return TCL_ERROR; } /* * A few of the options require additional processing, such as graphics * contexts. */ state = itemPtr->state; if (state == TK_STATE_NULL) { state = Canvas(canvas)->canvas_state; } if (linePtr->outline.activeWidth > linePtr->outline.width || linePtr->outline.activeDash.number != 0 || linePtr->outline.activeColor != NULL || linePtr->outline.activeStipple != None) { itemPtr->redraw_flags |= TK_ITEM_STATE_DEPENDANT; } else { itemPtr->redraw_flags &= ~TK_ITEM_STATE_DEPENDANT; } mask = Tk_ConfigOutlineGC(&gcValues, canvas, itemPtr, &linePtr->outline); if (mask) { if (linePtr->arrow == ARROWS_NONE) { gcValues.cap_style = linePtr->capStyle; mask |= GCCapStyle; } gcValues.join_style = linePtr->joinStyle; mask |= GCJoinStyle; newGC = Tk_GetGC(tkwin, mask, &gcValues); #ifdef MAC_OSX_TK /* * Mac OS X CG drawing needs access to linewidth even for arrow fills * (as linewidth controls antialiasing). */ mask |= GCLineWidth; #else gcValues.line_width = 0; #endif arrowGC = Tk_GetGC(tkwin, mask, &gcValues); } else { newGC = arrowGC = None; } if (linePtr->outline.gc != None) { Tk_FreeGC(Tk_Display(tkwin), linePtr->outline.gc); } if (linePtr->arrowGC != None) { Tk_FreeGC(Tk_Display(tkwin), linePtr->arrowGC); } linePtr->outline.gc = newGC; linePtr->arrowGC = arrowGC; /* * Keep spline parameters within reasonable limits. */ if (linePtr->splineSteps < 1) { linePtr->splineSteps = 1; } else if (linePtr->splineSteps > 100) { linePtr->splineSteps = 100; } if ((!linePtr->numPoints) || (state == TK_STATE_HIDDEN)) { ComputeLineBbox(canvas, linePtr); return TCL_OK; } /* * Setup arrowheads, if needed. If arrowheads are turned off, restore the * line's endpoints (they were shortened when the arrowheads were added). */ if ((linePtr->firstArrowPtr != NULL) && (linePtr->arrow != ARROWS_FIRST) && (linePtr->arrow != ARROWS_BOTH)) { linePtr->coordPtr[0] = linePtr->firstArrowPtr[0]; linePtr->coordPtr[1] = linePtr->firstArrowPtr[1]; ckfree(linePtr->firstArrowPtr); linePtr->firstArrowPtr = NULL; } if ((linePtr->lastArrowPtr != NULL) && (linePtr->arrow != ARROWS_LAST) && (linePtr->arrow != ARROWS_BOTH)) { int i; i = 2*(linePtr->numPoints-1); linePtr->coordPtr[i] = linePtr->lastArrowPtr[0]; linePtr->coordPtr[i+1] = linePtr->lastArrowPtr[1]; ckfree(linePtr->lastArrowPtr); linePtr->lastArrowPtr = NULL; } if (linePtr->arrow != ARROWS_NONE) { ConfigureArrows(canvas, linePtr); } /* * Recompute bounding box for line. */ ComputeLineBbox(canvas, linePtr); return TCL_OK; } /* *-------------------------------------------------------------- * * DeleteLine -- * * This function is called to clean up the data structure associated with * a line item. * * Results: * None. * * Side effects: * Resources associated with itemPtr are released. * *-------------------------------------------------------------- */ static void DeleteLine( Tk_Canvas canvas, /* Info about overall canvas widget. */ Tk_Item *itemPtr, /* Item that is being deleted. */ Display *display) /* Display containing window for canvas. */ { LineItem *linePtr = (LineItem *) itemPtr; Tk_DeleteOutline(display, &linePtr->outline); if (linePtr->coordPtr != NULL) { ckfree(linePtr->coordPtr); } if (linePtr->arrowGC != None) { Tk_FreeGC(display, linePtr->arrowGC); } if (linePtr->firstArrowPtr != NULL) { ckfree(linePtr->firstArrowPtr); } if (linePtr->lastArrowPtr != NULL) { ckfree(linePtr->lastArrowPtr); } } /* *-------------------------------------------------------------- * * ComputeLineBbox -- * * This function is invoked to compute the bounding box of all the pixels * that may be drawn as part of a line. * * Results: * None. * * Side effects: * The fields x1, y1, x2, and y2 are updated in the header for itemPtr. * *-------------------------------------------------------------- */ static void ComputeLineBbox( Tk_Canvas canvas, /* Canvas that contains item. */ LineItem *linePtr) /* Item whose bbos is to be recomputed. */ { double *coordPtr; int i, intWidth; double width; Tk_State state = linePtr->header.state; Tk_TSOffset *tsoffset; if (state == TK_STATE_NULL) { state = Canvas(canvas)->canvas_state; } if (!(linePtr->numPoints) || (state == TK_STATE_HIDDEN)) { linePtr->header.x1 = -1; linePtr->header.x2 = -1; linePtr->header.y1 = -1; linePtr->header.y2 = -1; return; } width = linePtr->outline.width; if (Canvas(canvas)->currentItemPtr == (Tk_Item *)linePtr) { if (linePtr->outline.activeWidth > width) { width = linePtr->outline.activeWidth; } } else if (state == TK_STATE_DISABLED) { if (linePtr->outline.disabledWidth > 0) { width = linePtr->outline.disabledWidth; } } coordPtr = linePtr->coordPtr; linePtr->header.x1 = linePtr->header.x2 = (int) coordPtr[0]; linePtr->header.y1 = linePtr->header.y2 = (int) coordPtr[1]; /* * Compute the bounding box of all the points in the line, then expand in * all directions by the line's width to take care of butting or rounded * corners and projecting or rounded caps. This expansion is an * overestimate (worst-case is square root of two over two) but it's * simple. Don't do anything special for curves. This causes an additional * overestimate in the bounding box, but is faster. */ for (i = 1, coordPtr = linePtr->coordPtr+2; i < linePtr->numPoints; i++, coordPtr += 2) { TkIncludePoint((Tk_Item *) linePtr, coordPtr); } width = linePtr->outline.width; if (width < 1.0) { width = 1.0; } if (linePtr->arrow != ARROWS_NONE) { if (linePtr->arrow != ARROWS_LAST) { TkIncludePoint((Tk_Item *) linePtr, linePtr->firstArrowPtr); } if (linePtr->arrow != ARROWS_FIRST) { TkIncludePoint((Tk_Item *) linePtr, linePtr->lastArrowPtr); } } tsoffset = &linePtr->outline.tsoffset; if (tsoffset->flags & TK_OFFSET_INDEX) { double *coordPtr = linePtr->coordPtr + (tsoffset->flags & ~TK_OFFSET_INDEX); if (tsoffset->flags <= 0) { coordPtr = linePtr->coordPtr; if ((linePtr->arrow == ARROWS_FIRST) || (linePtr->arrow == ARROWS_BOTH)) { coordPtr = linePtr->firstArrowPtr; } } if (tsoffset->flags > (linePtr->numPoints * 2)) { coordPtr = linePtr->coordPtr + (linePtr->numPoints * 2); if ((linePtr->arrow == ARROWS_LAST) || (linePtr->arrow == ARROWS_BOTH)) { coordPtr = linePtr->lastArrowPtr; } } tsoffset->xoffset = (int) (coordPtr[0] + 0.5); tsoffset->yoffset = (int) (coordPtr[1] + 0.5); } else { if (tsoffset->flags & TK_OFFSET_LEFT) { tsoffset->xoffset = linePtr->header.x1; } else if (tsoffset->flags & TK_OFFSET_CENTER) { tsoffset->xoffset = (linePtr->header.x1 + linePtr->header.x2)/2; } else if (tsoffset->flags & TK_OFFSET_RIGHT) { tsoffset->xoffset = linePtr->header.x2; } if (tsoffset->flags & TK_OFFSET_TOP) { tsoffset->yoffset = linePtr->header.y1; } else if (tsoffset->flags & TK_OFFSET_MIDDLE) { tsoffset->yoffset = (linePtr->header.y1 + linePtr->header.y2)/2; } else if (tsoffset->flags & TK_OFFSET_BOTTOM) { tsoffset->yoffset = linePtr->header.y2; } } intWidth = (int) (width + 0.5); linePtr->header.x1 -= intWidth; linePtr->header.x2 += intWidth; linePtr->header.y1 -= intWidth; linePtr->header.y2 += intWidth; if (linePtr->numPoints == 1) { linePtr->header.x1 -= 1; linePtr->header.x2 += 1; linePtr->header.y1 -= 1; linePtr->header.y2 += 1; return; } /* * For mitered lines, make a second pass through all the points. Compute * the locations of the two miter vertex points and add those into the * bounding box. */ if (linePtr->joinStyle == JoinMiter) { for (i = linePtr->numPoints, coordPtr = linePtr->coordPtr; i >= 3; i--, coordPtr += 2) { double miter[4]; int j; if (TkGetMiterPoints(coordPtr, coordPtr+2, coordPtr+4, width, miter, miter+2)) { for (j = 0; j < 4; j += 2) { TkIncludePoint((Tk_Item *) linePtr, miter+j); } } } } /* * Add in the sizes of arrowheads, if any. */ if (linePtr->arrow != ARROWS_NONE) { if (linePtr->arrow != ARROWS_LAST) { for (i = 0, coordPtr = linePtr->firstArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { TkIncludePoint((Tk_Item *) linePtr, coordPtr); } } if (linePtr->arrow != ARROWS_FIRST) { for (i = 0, coordPtr = linePtr->lastArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { TkIncludePoint((Tk_Item *) linePtr, coordPtr); } } } /* * Add one more pixel of fudge factor just to be safe (e.g. X may round * differently than we do). */ linePtr->header.x1 -= 1; linePtr->header.x2 += 1; linePtr->header.y1 -= 1; linePtr->header.y2 += 1; } /* *-------------------------------------------------------------- * * DisplayLine -- * * This function is invoked to draw a line item in a given drawable. * * Results: * None. * * Side effects: * ItemPtr is drawn in drawable using the transformation information in * canvas. * *-------------------------------------------------------------- */ static void DisplayLine( Tk_Canvas canvas, /* Canvas that contains item. */ Tk_Item *itemPtr, /* Item to be displayed. */ Display *display, /* Display on which to draw item. */ Drawable drawable, /* Pixmap or window in which to draw item. */ int x, int y, int width, int height) /* Describes region of canvas that must be * redisplayed (not used). */ { LineItem *linePtr = (LineItem *) itemPtr; XPoint staticPoints[MAX_STATIC_POINTS*3]; XPoint *pointPtr; double linewidth; int numPoints; Tk_State state = itemPtr->state; if ((!linePtr->numPoints) || (linePtr->outline.gc == None)) { return; } if (state == TK_STATE_NULL) { state = Canvas(canvas)->canvas_state; } linewidth = linePtr->outline.width; if (Canvas(canvas)->currentItemPtr == itemPtr) { if (linePtr->outline.activeWidth != linewidth) { linewidth = linePtr->outline.activeWidth; } } else if (state == TK_STATE_DISABLED) { if (linePtr->outline.disabledWidth != linewidth) { linewidth = linePtr->outline.disabledWidth; } } /* * Build up an array of points in screen coordinates. Use a static array * unless the line has an enormous number of points; in this case, * dynamically allocate an array. For smoothed lines, generate the curve * points on each redisplay. */ if ((linePtr->smooth) && (linePtr->numPoints > 2)) { numPoints = linePtr->smooth->coordProc(canvas, NULL, linePtr->numPoints, linePtr->splineSteps, NULL, NULL); } else { numPoints = linePtr->numPoints; } if (numPoints <= MAX_STATIC_POINTS) { pointPtr = staticPoints; } else { pointPtr = ckalloc(numPoints * 3 * sizeof(XPoint)); } if ((linePtr->smooth) && (linePtr->numPoints > 2)) { numPoints = linePtr->smooth->coordProc(canvas, linePtr->coordPtr, linePtr->numPoints, linePtr->splineSteps, pointPtr, NULL); } else { numPoints = TkCanvTranslatePath((TkCanvas *) canvas, numPoints, linePtr->coordPtr, 0, pointPtr); } /* * Display line, the free up line storage if it was dynamically allocated. * If we're stippling, then modify the stipple offset in the GC. Be sure * to reset the offset when done, since the GC is supposed to be * read-only. */ if (Tk_ChangeOutlineGC(canvas, itemPtr, &linePtr->outline)) { Tk_CanvasSetOffset(canvas, linePtr->arrowGC, &linePtr->outline.tsoffset); } if (numPoints > 1) { XDrawLines(display, drawable, linePtr->outline.gc, pointPtr, numPoints, CoordModeOrigin); } else { int intwidth = (int) (linewidth + 0.5); if (intwidth < 1) { intwidth = 1; } XFillArc(display, drawable, linePtr->outline.gc, pointPtr->x - intwidth/2, pointPtr->y - intwidth/2, (unsigned) intwidth+1, (unsigned) intwidth+1, 0, 64*360); } if (pointPtr != staticPoints) { ckfree(pointPtr); } /* * Display arrowheads, if they are wanted. */ if (linePtr->firstArrowPtr != NULL) { TkFillPolygon(canvas, linePtr->firstArrowPtr, PTS_IN_ARROW, display, drawable, linePtr->arrowGC, NULL); } if (linePtr->lastArrowPtr != NULL) { TkFillPolygon(canvas, linePtr->lastArrowPtr, PTS_IN_ARROW, display, drawable, linePtr->arrowGC, NULL); } if (Tk_ResetOutlineGC(canvas, itemPtr, &linePtr->outline)) { XSetTSOrigin(display, linePtr->arrowGC, 0, 0); } } /* *-------------------------------------------------------------- * * LineInsert -- * * Insert coords into a line item at a given index. * * Results: * None. * * Side effects: * The coords in the given item is modified. * *-------------------------------------------------------------- */ static void LineInsert( Tk_Canvas canvas, /* Canvas containing text item. */ Tk_Item *itemPtr, /* Line item to be modified. */ int beforeThis, /* Index before which new coordinates are to * be inserted. */ Tcl_Obj *obj) /* New coordinates to be inserted. */ { LineItem *linePtr = (LineItem *) itemPtr; int length, objc, i; double *newCoordPtr, *coordPtr; Tk_State state = itemPtr->state; Tcl_Obj **objv; if (state == TK_STATE_NULL) { state = Canvas(canvas)->canvas_state; } if (!obj || (Tcl_ListObjGetElements(NULL, obj, &objc, &objv) != TCL_OK) || !objc || objc&1) { return; } length = 2*linePtr->numPoints; if (beforeThis < 0) { beforeThis = 0; } if (beforeThis > length) { beforeThis = length; } if (linePtr->firstArrowPtr != NULL) { linePtr->coordPtr[0] = linePtr->firstArrowPtr[0]; linePtr->coordPtr[1] = linePtr->firstArrowPtr[1]; } if (linePtr->lastArrowPtr != NULL) { linePtr->coordPtr[length-2] = linePtr->lastArrowPtr[0]; linePtr->coordPtr[length-1] = linePtr->lastArrowPtr[1]; } newCoordPtr = ckalloc(sizeof(double) * (length + objc)); for (i=0; icoordPtr[i]; } for (i=0; iinterp); ckfree(newCoordPtr); return; } } for (i=beforeThis; icoordPtr[i]; } if (linePtr->coordPtr) { ckfree(linePtr->coordPtr); } linePtr->coordPtr = newCoordPtr; length += objc ; linePtr->numPoints = length / 2; if ((length > 3) && (state != TK_STATE_HIDDEN)) { /* * This is some optimizing code that will result that only the part of * the polygon that changed (and the objects that are overlapping with * that part) need to be redrawn. A special flag is set that instructs * the general canvas code not to redraw the whole object. If this * flag is not set, the canvas will do the redrawing, otherwise I have * to do it here. */ itemPtr->redraw_flags |= TK_ITEM_DONT_REDRAW; if (beforeThis > 0) { beforeThis -= 2; objc += 2; } if (beforeThis+objc < length) { objc += 2; } if (linePtr->smooth) { if (beforeThis > 0) { beforeThis -= 2; objc += 2; } if (beforeThis+objc+2 < length) { objc += 2; } } itemPtr->x1 = itemPtr->x2 = (int) linePtr->coordPtr[beforeThis]; itemPtr->y1 = itemPtr->y2 = (int) linePtr->coordPtr[beforeThis+1]; if ((linePtr->firstArrowPtr != NULL) && (beforeThis < 1)) { /* * Include old first arrow. */ for (i = 0, coordPtr = linePtr->firstArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { TkIncludePoint(itemPtr, coordPtr); } } if ((linePtr->lastArrowPtr != NULL) && (beforeThis+objc >= length)) { /* * Include old last arrow. */ for (i = 0, coordPtr = linePtr->lastArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { TkIncludePoint(itemPtr, coordPtr); } } coordPtr = linePtr->coordPtr + beforeThis + 2; for (i=2; ifirstArrowPtr != NULL) { ckfree(linePtr->firstArrowPtr); linePtr->firstArrowPtr = NULL; } if (linePtr->lastArrowPtr != NULL) { ckfree(linePtr->lastArrowPtr); linePtr->lastArrowPtr = NULL; } if (linePtr->arrow != ARROWS_NONE) { ConfigureArrows(canvas, linePtr); } if (itemPtr->redraw_flags & TK_ITEM_DONT_REDRAW) { double width; int intWidth; if ((linePtr->firstArrowPtr != NULL) && (beforeThis > 2)) { /* * Include new first arrow. */ for (i = 0, coordPtr = linePtr->firstArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { TkIncludePoint(itemPtr, coordPtr); } } if ((linePtr->lastArrowPtr != NULL) && (beforeThis+objc < length-2)) { /* * Include new right arrow. */ for (i = 0, coordPtr = linePtr->lastArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { TkIncludePoint(itemPtr, coordPtr); } } width = linePtr->outline.width; if (Canvas(canvas)->currentItemPtr == itemPtr) { if (linePtr->outline.activeWidth > width) { width = linePtr->outline.activeWidth; } } else if (state == TK_STATE_DISABLED) { if (linePtr->outline.disabledWidth > 0) { width = linePtr->outline.disabledWidth; } } intWidth = (int) (width + 0.5); if (intWidth < 1) { intWidth = 1; } itemPtr->x1 -= intWidth; itemPtr->y1 -= intWidth; itemPtr->x2 += intWidth; itemPtr->y2 += intWidth; Tk_CanvasEventuallyRedraw(canvas, itemPtr->x1, itemPtr->y1, itemPtr->x2, itemPtr->y2); } ComputeLineBbox(canvas, linePtr); } /* *-------------------------------------------------------------- * * LineDeleteCoords -- * * Delete one or more coordinates from a line item. * * Results: * None. * * Side effects: * Characters between "first" and "last", inclusive, get deleted from * itemPtr. * *-------------------------------------------------------------- */ static void LineDeleteCoords( Tk_Canvas canvas, /* Canvas containing itemPtr. */ Tk_Item *itemPtr, /* Item in which to delete characters. */ int first, /* Index of first character to delete. */ int last) /* Index of last character to delete. */ { LineItem *linePtr = (LineItem *) itemPtr; int count, i, first1, last1; int length = 2*linePtr->numPoints; double *coordPtr; Tk_State state = itemPtr->state; if (state == TK_STATE_NULL) { state = Canvas(canvas)->canvas_state; } first &= -2; last &= -2; if (first < 0) { first = 0; } if (last >= length) { last = length-2; } if (first > last) { return; } if (linePtr->firstArrowPtr != NULL) { linePtr->coordPtr[0] = linePtr->firstArrowPtr[0]; linePtr->coordPtr[1] = linePtr->firstArrowPtr[1]; } if (linePtr->lastArrowPtr != NULL) { linePtr->coordPtr[length-2] = linePtr->lastArrowPtr[0]; linePtr->coordPtr[length-1] = linePtr->lastArrowPtr[1]; } first1 = first; last1 = last; if (first1 > 0) { first1 -= 2; } if (last1 < length-2) { last1 += 2; } if (linePtr->smooth) { if (first1 > 0) { first1 -= 2; } if (last1 < length-2) { last1 += 2; } } if ((first1 >= 2) || (last1 < length-2)) { /* * This is some optimizing code that will result that only the part of * the line that changed (and the objects that are overlapping with * that part) need to be redrawn. A special flag is set that instructs * the general canvas code not to redraw the whole object. If this * flag is set, the redrawing has to be done here, otherwise the * general Canvas code will take care of it. */ itemPtr->redraw_flags |= TK_ITEM_DONT_REDRAW; itemPtr->x1 = itemPtr->x2 = (int) linePtr->coordPtr[first1]; itemPtr->y1 = itemPtr->y2 = (int) linePtr->coordPtr[first1+1]; if ((linePtr->firstArrowPtr != NULL) && (first1 < 2)) { /* * Include old first arrow. */ for (i = 0, coordPtr = linePtr->firstArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { TkIncludePoint(itemPtr, coordPtr); } } if ((linePtr->lastArrowPtr != NULL) && (last1 >= length-2)) { /* * Include old last arrow. */ for (i = 0, coordPtr = linePtr->lastArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { TkIncludePoint(itemPtr, coordPtr); } } coordPtr = linePtr->coordPtr+first1+2; for (i=first1+2; i<=last1; i+=2) { TkIncludePoint(itemPtr, coordPtr); coordPtr += 2; } } count = last + 2 - first; for (i=last+2; icoordPtr[i-count] = linePtr->coordPtr[i]; } linePtr->numPoints -= count/2; if (linePtr->firstArrowPtr != NULL) { ckfree(linePtr->firstArrowPtr); linePtr->firstArrowPtr = NULL; } if (linePtr->lastArrowPtr != NULL) { ckfree(linePtr->lastArrowPtr); linePtr->lastArrowPtr = NULL; } if (linePtr->arrow != ARROWS_NONE) { ConfigureArrows(canvas, linePtr); } if (itemPtr->redraw_flags & TK_ITEM_DONT_REDRAW) { double width; int intWidth; if ((linePtr->firstArrowPtr != NULL) && (first1 < 4)) { /* * Include new first arrow. */ for (i = 0, coordPtr = linePtr->firstArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { TkIncludePoint(itemPtr, coordPtr); } } if ((linePtr->lastArrowPtr != NULL) && (last1 > length-4)) { /* * Include new right arrow. */ for (i = 0, coordPtr = linePtr->lastArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { TkIncludePoint(itemPtr, coordPtr); } } width = linePtr->outline.width; if (Canvas(canvas)->currentItemPtr == itemPtr) { if (linePtr->outline.activeWidth > width) { width = linePtr->outline.activeWidth; } } else if (state == TK_STATE_DISABLED) { if (linePtr->outline.disabledWidth > 0) { width = linePtr->outline.disabledWidth; } } intWidth = (int) (width + 0.5); if (intWidth < 1) { intWidth = 1; } itemPtr->x1 -= intWidth; itemPtr->y1 -= intWidth; itemPtr->x2 += intWidth; itemPtr->y2 += intWidth; Tk_CanvasEventuallyRedraw(canvas, itemPtr->x1, itemPtr->y1, itemPtr->x2, itemPtr->y2); } ComputeLineBbox(canvas, linePtr); } /* *-------------------------------------------------------------- * * LineToPoint -- * * Computes the distance from a given point to a given line, in canvas * units. * * Results: * The return value is 0 if the point whose x and y coordinates are * pointPtr[0] and pointPtr[1] is inside the line. If the point isn't * inside the line then the return value is the distance from the point * to the line. * * Side effects: * None. * *-------------------------------------------------------------- */ /* ARGSUSED */ static double LineToPoint( Tk_Canvas canvas, /* Canvas containing item. */ Tk_Item *itemPtr, /* Item to check against point. */ double *pointPtr) /* Pointer to x and y coordinates. */ { Tk_State state = itemPtr->state; LineItem *linePtr = (LineItem *) itemPtr; double *coordPtr, *linePoints; double staticSpace[2*MAX_STATIC_POINTS]; double poly[10]; double bestDist, dist, width; int numPoints, count; int changedMiterToBevel; /* Non-zero means that a mitered corner had to * be treated as beveled after all because the * angle was < 11 degrees. */ bestDist = 1.0e36; /* * Handle smoothed lines by generating an expanded set of points against * which to do the check. */ if (state == TK_STATE_NULL) { state = Canvas(canvas)->canvas_state; } width = linePtr->outline.width; if (Canvas(canvas)->currentItemPtr == itemPtr) { if (linePtr->outline.activeWidth > width) { width = linePtr->outline.activeWidth; } } else if (state == TK_STATE_DISABLED) { if (linePtr->outline.disabledWidth > 0) { width = linePtr->outline.disabledWidth; } } if ((linePtr->smooth) && (linePtr->numPoints > 2)) { numPoints = linePtr->smooth->coordProc(canvas, NULL, linePtr->numPoints, linePtr->splineSteps, NULL, NULL); if (numPoints <= MAX_STATIC_POINTS) { linePoints = staticSpace; } else { linePoints = ckalloc(2 * numPoints * sizeof(double)); } numPoints = linePtr->smooth->coordProc(canvas, linePtr->coordPtr, linePtr->numPoints, linePtr->splineSteps, NULL, linePoints); } else { numPoints = linePtr->numPoints; linePoints = linePtr->coordPtr; } if (width < 1.0) { width = 1.0; } if (!numPoints || itemPtr->state == TK_STATE_HIDDEN) { return bestDist; } else if (numPoints == 1) { bestDist = hypot(linePoints[0]-pointPtr[0], linePoints[1]-pointPtr[1]) - width/2.0; if (bestDist < 0) { bestDist = 0; } return bestDist; } /* * The overall idea is to iterate through all of the edges of the line, * computing a polygon for each edge and testing the point against that * polygon. In addition, there are additional tests to deal with rounded * joints and caps. */ changedMiterToBevel = 0; for (count = numPoints, coordPtr = linePoints; count >= 2; count--, coordPtr += 2) { /* * If rounding is done around the first point then compute the * distance between the point and the point. */ if (((linePtr->capStyle == CapRound) && (count == numPoints)) || ((linePtr->joinStyle == JoinRound) && (count != numPoints))) { dist = hypot(coordPtr[0] - pointPtr[0], coordPtr[1] - pointPtr[1]) - width/2.0; if (dist <= 0.0) { bestDist = 0.0; goto done; } else if (dist < bestDist) { bestDist = dist; } } /* * Compute the polygonal shape corresponding to this edge, consisting * of two points for the first point of the edge and two points for * the last point of the edge. */ if (count == numPoints) { TkGetButtPoints(coordPtr+2, coordPtr, width, linePtr->capStyle == CapProjecting, poly, poly+2); } else if ((linePtr->joinStyle == JoinMiter) && !changedMiterToBevel) { poly[0] = poly[6]; poly[1] = poly[7]; poly[2] = poly[4]; poly[3] = poly[5]; } else { TkGetButtPoints(coordPtr+2, coordPtr, width, 0, poly, poly+2); /* * If this line uses beveled joints, then check the distance to a * polygon comprising the last two points of the previous polygon * and the first two from this polygon; this checks the wedges * that fill the mitered joint. */ if ((linePtr->joinStyle == JoinBevel) || changedMiterToBevel) { poly[8] = poly[0]; poly[9] = poly[1]; dist = TkPolygonToPoint(poly, 5, pointPtr); if (dist <= 0.0) { bestDist = 0.0; goto done; } else if (dist < bestDist) { bestDist = dist; } changedMiterToBevel = 0; } } if (count == 2) { TkGetButtPoints(coordPtr, coordPtr+2, width, linePtr->capStyle == CapProjecting, poly+4, poly+6); } else if (linePtr->joinStyle == JoinMiter) { if (TkGetMiterPoints(coordPtr, coordPtr+2, coordPtr+4, width, poly+4, poly+6) == 0) { changedMiterToBevel = 1; TkGetButtPoints(coordPtr, coordPtr+2, width, 0, poly+4, poly+6); } } else { TkGetButtPoints(coordPtr, coordPtr+2, width, 0, poly+4, poly+6); } poly[8] = poly[0]; poly[9] = poly[1]; dist = TkPolygonToPoint(poly, 5, pointPtr); if (dist <= 0.0) { bestDist = 0.0; goto done; } else if (dist < bestDist) { bestDist = dist; } } /* * If caps are rounded, check the distance to the cap around the final end * point of the line. */ if (linePtr->capStyle == CapRound) { dist = hypot(coordPtr[0] - pointPtr[0], coordPtr[1] - pointPtr[1]) - width/2.0; if (dist <= 0.0) { bestDist = 0.0; goto done; } else if (dist < bestDist) { bestDist = dist; } } /* * If there are arrowheads, check the distance to the arrowheads. */ if (linePtr->arrow != ARROWS_NONE) { if (linePtr->arrow != ARROWS_LAST) { dist = TkPolygonToPoint(linePtr->firstArrowPtr, PTS_IN_ARROW, pointPtr); if (dist <= 0.0) { bestDist = 0.0; goto done; } else if (dist < bestDist) { bestDist = dist; } } if (linePtr->arrow != ARROWS_FIRST) { dist = TkPolygonToPoint(linePtr->lastArrowPtr, PTS_IN_ARROW, pointPtr); if (dist <= 0.0) { bestDist = 0.0; goto done; } else if (dist < bestDist) { bestDist = dist; } } } done: if ((linePoints != staticSpace) && (linePoints != linePtr->coordPtr)) { ckfree(linePoints); } return bestDist; } /* *-------------------------------------------------------------- * * LineToArea -- * * This function is called to determine whether an item lies entirely * inside, entirely outside, or overlapping a given rectangular area. * * Results: * -1 is returned if the item is entirely outside the area, 0 if it * overlaps, and 1 if it is entirely inside the given area. * * Side effects: * None. * *-------------------------------------------------------------- */ /* ARGSUSED */ static int LineToArea( Tk_Canvas canvas, /* Canvas containing item. */ Tk_Item *itemPtr, /* Item to check against line. */ double *rectPtr) { LineItem *linePtr = (LineItem *) itemPtr; double staticSpace[2*MAX_STATIC_POINTS]; double *linePoints; int numPoints, result; double radius, width; Tk_State state = itemPtr->state; if (state == TK_STATE_NULL) { state = Canvas(canvas)->canvas_state; } width = linePtr->outline.width; if (Canvas(canvas)->currentItemPtr == itemPtr) { if (linePtr->outline.activeWidth > width) { width = linePtr->outline.activeWidth; } } else if (state == TK_STATE_DISABLED) { if (linePtr->outline.disabledWidth > 0) { width = linePtr->outline.disabledWidth; } } radius = (width+1.0)/2.0; if ((state == TK_STATE_HIDDEN) || !linePtr->numPoints) { return -1; } else if (linePtr->numPoints == 1) { double oval[4]; oval[0] = linePtr->coordPtr[0]-radius; oval[1] = linePtr->coordPtr[1]-radius; oval[2] = linePtr->coordPtr[0]+radius; oval[3] = linePtr->coordPtr[1]+radius; return TkOvalToArea(oval, rectPtr); } /* * Handle smoothed lines by generating an expanded set of points against * which to do the check. */ if ((linePtr->smooth) && (linePtr->numPoints > 2)) { numPoints = linePtr->smooth->coordProc(canvas, NULL, linePtr->numPoints, linePtr->splineSteps, NULL, NULL); if (numPoints <= MAX_STATIC_POINTS) { linePoints = staticSpace; } else { linePoints = ckalloc(2 * numPoints * sizeof(double)); } numPoints = linePtr->smooth->coordProc(canvas, linePtr->coordPtr, linePtr->numPoints, linePtr->splineSteps, NULL, linePoints); } else { numPoints = linePtr->numPoints; linePoints = linePtr->coordPtr; } /* * Check the segments of the line. */ if (width < 1.0) { width = 1.0; } result = TkThickPolyLineToArea(linePoints, numPoints, width, linePtr->capStyle, linePtr->joinStyle, rectPtr); if (result == 0) { goto done; } /* * Check arrowheads, if any. */ if (linePtr->arrow != ARROWS_NONE) { if (linePtr->arrow != ARROWS_LAST) { if (TkPolygonToArea(linePtr->firstArrowPtr, PTS_IN_ARROW, rectPtr) != result) { result = 0; goto done; } } if (linePtr->arrow != ARROWS_FIRST) { if (TkPolygonToArea(linePtr->lastArrowPtr, PTS_IN_ARROW, rectPtr) != result) { result = 0; goto done; } } } done: if ((linePoints != staticSpace) && (linePoints != linePtr->coordPtr)) { ckfree(linePoints); } return result; } /* *-------------------------------------------------------------- * * ScaleLine -- * * This function is invoked to rescale a line item. * * Results: * None. * * Side effects: * The line referred to by itemPtr is rescaled so that the following * transformation is applied to all point coordinates: * x' = originX + scaleX*(x-originX) * y' = originY + scaleY*(y-originY) * *-------------------------------------------------------------- */ static void ScaleLine( Tk_Canvas canvas, /* Canvas containing line. */ Tk_Item *itemPtr, /* Line to be scaled. */ double originX, double originY, /* Origin about which to scale rect. */ double scaleX, /* Amount to scale in X direction. */ double scaleY) /* Amount to scale in Y direction. */ { LineItem *linePtr = (LineItem *) itemPtr; double *coordPtr; int i; /* * Delete any arrowheads before scaling all the points (so that the * end-points of the line get restored). */ if (linePtr->firstArrowPtr != NULL) { linePtr->coordPtr[0] = linePtr->firstArrowPtr[0]; linePtr->coordPtr[1] = linePtr->firstArrowPtr[1]; ckfree(linePtr->firstArrowPtr); linePtr->firstArrowPtr = NULL; } if (linePtr->lastArrowPtr != NULL) { int i; i = 2*(linePtr->numPoints-1); linePtr->coordPtr[i] = linePtr->lastArrowPtr[0]; linePtr->coordPtr[i+1] = linePtr->lastArrowPtr[1]; ckfree(linePtr->lastArrowPtr); linePtr->lastArrowPtr = NULL; } for (i = 0, coordPtr = linePtr->coordPtr; i < linePtr->numPoints; i++, coordPtr += 2) { coordPtr[0] = originX + scaleX*(*coordPtr - originX); coordPtr[1] = originY + scaleY*(coordPtr[1] - originY); } if (linePtr->arrow != ARROWS_NONE) { ConfigureArrows(canvas, linePtr); } ComputeLineBbox(canvas, linePtr); } /* *-------------------------------------------------------------- * * GetLineIndex -- * * Parse an index into a line item and return either its value or an * error. * * Results: * A standard Tcl result. If all went well, then *indexPtr is filled in * with the index (into itemPtr) corresponding to string. Otherwise an * error message is left in interp->result. * * Side effects: * None. * *-------------------------------------------------------------- */ static int GetLineIndex( Tcl_Interp *interp, /* Used for error reporting. */ Tk_Canvas canvas, /* Canvas containing item. */ Tk_Item *itemPtr, /* Item for which the index is being * specified. */ Tcl_Obj *obj, /* Specification of a particular coord in * itemPtr's line. */ int *indexPtr) /* Where to store converted index. */ { LineItem *linePtr = (LineItem *) itemPtr; const char *string = Tcl_GetString(obj); if (string[0] == 'e') { if (strncmp(string, "end", obj->length) == 0) { *indexPtr = 2*linePtr->numPoints; } else { goto badIndex; } } else if (string[0] == '@') { int i; double x, y, bestDist, dist, *coordPtr; char *end; const char *p; p = string+1; x = strtod(p, &end); if ((end == p) || (*end != ',')) { goto badIndex; } p = end+1; y = strtod(p, &end); if ((end == p) || (*end != 0)) { goto badIndex; } bestDist = 1.0e36; coordPtr = linePtr->coordPtr; *indexPtr = 0; for (i=0; inumPoints; i++) { dist = hypot(coordPtr[0] - x, coordPtr[1] - y); if (dist < bestDist) { bestDist = dist; *indexPtr = 2*i; } coordPtr += 2; } } else { if (Tcl_GetIntFromObj(interp, obj, indexPtr) != TCL_OK) { goto badIndex; } *indexPtr &= -2; /* If index is odd, make it even. */ if (*indexPtr < 0){ *indexPtr = 0; } else if (*indexPtr > (2*linePtr->numPoints)) { *indexPtr = (2*linePtr->numPoints); } } return TCL_OK; /* * Some of the paths here leave messages in interp->result, so we have to * clear it out before storing our own message. */ badIndex: Tcl_ResetResult(interp); Tcl_SetObjResult(interp, Tcl_ObjPrintf("bad index \"%s\"", string)); Tcl_SetErrorCode(interp, "TK", "CANVAS", "ITEM_INDEX", "LINE", NULL); return TCL_ERROR; } /* *-------------------------------------------------------------- * * TranslateLine -- * * This function is called to move a line by a given amount. * * Results: * None. * * Side effects: * The position of the line is offset by (xDelta, yDelta), and the * bounding box is updated in the generic part of the item structure. * *-------------------------------------------------------------- */ static void TranslateLine( Tk_Canvas canvas, /* Canvas containing item. */ Tk_Item *itemPtr, /* Item that is being moved. */ double deltaX, double deltaY) /* Amount by which item is to be moved. */ { LineItem *linePtr = (LineItem *) itemPtr; double *coordPtr; int i; for (i = 0, coordPtr = linePtr->coordPtr; i < linePtr->numPoints; i++, coordPtr += 2) { coordPtr[0] += deltaX; coordPtr[1] += deltaY; } if (linePtr->firstArrowPtr != NULL) { for (i = 0, coordPtr = linePtr->firstArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { coordPtr[0] += deltaX; coordPtr[1] += deltaY; } } if (linePtr->lastArrowPtr != NULL) { for (i = 0, coordPtr = linePtr->lastArrowPtr; i < PTS_IN_ARROW; i++, coordPtr += 2) { coordPtr[0] += deltaX; coordPtr[1] += deltaY; } } ComputeLineBbox(canvas, linePtr); } /* *-------------------------------------------------------------- * * ParseArrowShape -- * * This function is called back during option parsing to parse arrow * shape information. * * Results: * The return value is a standard Tcl result: TCL_OK means that the arrow * shape information was parsed ok, and TCL_ERROR means it couldn't be * parsed. * * Side effects: * Arrow information in recordPtr is updated. * *-------------------------------------------------------------- */ /* ARGSUSED */ static int ParseArrowShape( ClientData clientData, /* Not used. */ Tcl_Interp *interp, /* Used for error reporting. */ Tk_Window tkwin, /* Not used. */ const char *value, /* Textual specification of arrow shape. */ char *recordPtr, /* Pointer to item record in which to store * arrow information. */ int offset) /* Offset of shape information in widget * record. */ { LineItem *linePtr = (LineItem *) recordPtr; double a, b, c; int argc; const char **argv = NULL; if (offset != Tk_Offset(LineItem, arrowShapeA)) { Tcl_Panic("ParseArrowShape received bogus offset"); } if (Tcl_SplitList(interp, (char *) value, &argc, &argv) != TCL_OK) { goto syntaxError; } else if (argc != 3) { goto syntaxError; } if ((Tk_CanvasGetCoord(interp, linePtr->canvas, argv[0], &a) != TCL_OK) || (Tk_CanvasGetCoord(interp, linePtr->canvas, argv[1], &b) != TCL_OK) || (Tk_CanvasGetCoord(interp, linePtr->canvas, argv[2], &c) != TCL_OK)) { goto syntaxError; } linePtr->arrowShapeA = (float) a; linePtr->arrowShapeB = (float) b; linePtr->arrowShapeC = (float) c; ckfree(argv); return TCL_OK; syntaxError: Tcl_ResetResult(interp); Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad arrow shape \"%s\": must be list with three numbers", value)); Tcl_SetErrorCode(interp, "TK", "CANVAS", "ARROW_SHAPE", NULL); if (argv != NULL) { ckfree(argv); } return TCL_ERROR; } /* *-------------------------------------------------------------- * * PrintArrowShape -- * * This function is a callback invoked by the configuration code to * return a printable value describing an arrow shape. * * Results: * None. * * Side effects: * None. * *-------------------------------------------------------------- */ /* ARGSUSED */ static const char * PrintArrowShape( ClientData clientData, /* Not used. */ Tk_Window tkwin, /* Window associated with linePtr's widget. */ char *recordPtr, /* Pointer to item record containing current * shape information. */ int offset, /* Offset of arrow information in record. */ Tcl_FreeProc **freeProcPtr) /* Store address of function to call to free * string here. */ { LineItem *linePtr = (LineItem *) recordPtr; char *buffer = ckalloc(120); sprintf(buffer, "%.5g %.5g %.5g", linePtr->arrowShapeA, linePtr->arrowShapeB, linePtr->arrowShapeC); *freeProcPtr = TCL_DYNAMIC; return buffer; } /* *-------------------------------------------------------------- * * ArrowParseProc -- * * This function is invoked during option processing to handle the * "-arrow" option. * * Results: * A standard Tcl return value. * * Side effects: * The arrow for a given item gets replaced by the arrow indicated in the * value argument. * *-------------------------------------------------------------- */ static int ArrowParseProc( ClientData clientData, /* some flags.*/ Tcl_Interp *interp, /* Used for reporting errors. */ Tk_Window tkwin, /* Window containing canvas widget. */ const char *value, /* Value of option. */ char *widgRec, /* Pointer to record for item. */ int offset) /* Offset into item. */ { int c; size_t length; register Arrows *arrowPtr = (Arrows *) (widgRec + offset); if (value == NULL || *value == 0) { *arrowPtr = ARROWS_NONE; return TCL_OK; } c = value[0]; length = strlen(value); if ((c == 'n') && (strncmp(value, "none", length) == 0)) { *arrowPtr = ARROWS_NONE; return TCL_OK; } if ((c == 'f') && (strncmp(value, "first", length) == 0)) { *arrowPtr = ARROWS_FIRST; return TCL_OK; } if ((c == 'l') && (strncmp(value, "last", length) == 0)) { *arrowPtr = ARROWS_LAST; return TCL_OK; } if ((c == 'b') && (strncmp(value, "both", length) == 0)) { *arrowPtr = ARROWS_BOTH; return TCL_OK; } Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad arrow spec \"%s\": must be none, first, last, or both", value)); Tcl_SetErrorCode(interp, "TK", "CANVAS", "ARROW", NULL); *arrowPtr = ARROWS_NONE; return TCL_ERROR; } /* *-------------------------------------------------------------- * * ArrowPrintProc -- * * This function is invoked by the Tk configuration code to produce a * printable string for the "-arrow" configuration option. * * Results: * The return value is a string describing the arrows for the item * referred to by "widgRec". In addition, *freeProcPtr is filled in with * the address of a function to call to free the result string when it's * no longer needed (or NULL to indicate that the string doesn't need to * be freed). * * Side effects: * None. * *-------------------------------------------------------------- */ static const char * ArrowPrintProc( ClientData clientData, /* Ignored. */ Tk_Window tkwin, /* Window containing canvas widget. */ char *widgRec, /* Pointer to record for item. */ int offset, /* Offset into item. */ Tcl_FreeProc **freeProcPtr) /* Pointer to variable to fill in with * information about how to reclaim storage * for return string. */ { register Arrows *arrowPtr = (Arrows *) (widgRec + offset); switch (*arrowPtr) { case ARROWS_FIRST: return "first"; case ARROWS_LAST: return "last"; case ARROWS_BOTH: return "both"; default: return "none"; } } /* *-------------------------------------------------------------- * * ConfigureArrows -- * * If arrowheads have been requested for a line, this function makes * arrangements for the arrowheads. * * Results: * Always returns TCL_OK. * * Side effects: * Information in linePtr is set up for one or two arrowheads. The * firstArrowPtr and lastArrowPtr polygons are allocated and initialized, * if need be, and the end points of the line are adjusted so that a * thick line doesn't stick out past the arrowheads. * *-------------------------------------------------------------- */ /* ARGSUSED */ static int ConfigureArrows( Tk_Canvas canvas, /* Canvas in which arrows will be displayed * (interp and tkwin fields are needed). */ LineItem *linePtr) /* Item to configure for arrows. */ { double *poly, *coordPtr; double dx, dy, length, sinTheta, cosTheta, temp; double fracHeight; /* Line width as fraction of arrowhead * width. */ double backup; /* Distance to backup end points so the line * ends in the middle of the arrowhead. */ double vertX, vertY; /* Position of arrowhead vertex. */ double shapeA, shapeB, shapeC; /* Adjusted coordinates (see explanation * below). */ double width; Tk_State state = linePtr->header.state; if (linePtr->numPoints < 2) { return TCL_OK; } if (state == TK_STATE_NULL) { state = Canvas(canvas)->canvas_state; } width = linePtr->outline.width; if (Canvas(canvas)->currentItemPtr == (Tk_Item *)linePtr) { if (linePtr->outline.activeWidth > width) { width = linePtr->outline.activeWidth; } } else if (state == TK_STATE_DISABLED) { if (linePtr->outline.disabledWidth > 0) { width = linePtr->outline.disabledWidth; } } /* * The code below makes a tiny increase in the shape parameters for the * line. This is a bit of a hack, but it seems to result in displays that * more closely approximate the specified parameters. Without the * adjustment, the arrows come out smaller than expected. */ shapeA = linePtr->arrowShapeA + 0.001; shapeB = linePtr->arrowShapeB + 0.001; shapeC = linePtr->arrowShapeC + width/2.0 + 0.001; /* * If there's an arrowhead on the first point of the line, compute its * polygon and adjust the first point of the line so that the line doesn't * stick out past the leading edge of the arrowhead. */ fracHeight = (width/2.0)/shapeC; backup = fracHeight*shapeB + shapeA*(1.0 - fracHeight)/2.0; if (linePtr->arrow != ARROWS_LAST) { poly = linePtr->firstArrowPtr; if (poly == NULL) { poly = ckalloc(2 * PTS_IN_ARROW * sizeof(double)); poly[0] = poly[10] = linePtr->coordPtr[0]; poly[1] = poly[11] = linePtr->coordPtr[1]; linePtr->firstArrowPtr = poly; } dx = poly[0] - linePtr->coordPtr[2]; dy = poly[1] - linePtr->coordPtr[3]; length = hypot(dx, dy); if (length == 0) { sinTheta = cosTheta = 0.0; } else { sinTheta = dy/length; cosTheta = dx/length; } vertX = poly[0] - shapeA*cosTheta; vertY = poly[1] - shapeA*sinTheta; temp = shapeC*sinTheta; poly[2] = poly[0] - shapeB*cosTheta + temp; poly[8] = poly[2] - 2*temp; temp = shapeC*cosTheta; poly[3] = poly[1] - shapeB*sinTheta - temp; poly[9] = poly[3] + 2*temp; poly[4] = poly[2]*fracHeight + vertX*(1.0-fracHeight); poly[5] = poly[3]*fracHeight + vertY*(1.0-fracHeight); poly[6] = poly[8]*fracHeight + vertX*(1.0-fracHeight); poly[7] = poly[9]*fracHeight + vertY*(1.0-fracHeight); /* * Polygon done. Now move the first point towards the second so that * the corners at the end of the line are inside the arrowhead. */ linePtr->coordPtr[0] = poly[0] - backup*cosTheta; linePtr->coordPtr[1] = poly[1] - backup*sinTheta; } /* * Similar arrowhead calculation for the last point of the line. */ if (linePtr->arrow != ARROWS_FIRST) { coordPtr = linePtr->coordPtr + 2*(linePtr->numPoints-2); poly = linePtr->lastArrowPtr; if (poly == NULL) { poly = ckalloc(2 * PTS_IN_ARROW * sizeof(double)); poly[0] = poly[10] = coordPtr[2]; poly[1] = poly[11] = coordPtr[3]; linePtr->lastArrowPtr = poly; } dx = poly[0] - coordPtr[0]; dy = poly[1] - coordPtr[1]; length = hypot(dx, dy); if (length == 0) { sinTheta = cosTheta = 0.0; } else { sinTheta = dy/length; cosTheta = dx/length; } vertX = poly[0] - shapeA*cosTheta; vertY = poly[1] - shapeA*sinTheta; temp = shapeC * sinTheta; poly[2] = poly[0] - shapeB*cosTheta + temp; poly[8] = poly[2] - 2*temp; temp = shapeC * cosTheta; poly[3] = poly[1] - shapeB*sinTheta - temp; poly[9] = poly[3] + 2*temp; poly[4] = poly[2]*fracHeight + vertX*(1.0-fracHeight); poly[5] = poly[3]*fracHeight + vertY*(1.0-fracHeight); poly[6] = poly[8]*fracHeight + vertX*(1.0-fracHeight); poly[7] = poly[9]*fracHeight + vertY*(1.0-fracHeight); coordPtr[2] = poly[0] - backup*cosTheta; coordPtr[3] = poly[1] - backup*sinTheta; } return TCL_OK; } /* *-------------------------------------------------------------- * * LineToPostscript -- * * This function is called to generate Postscript for line items. * * Results: * The return value is a standard Tcl result. If an error occurs in * generating Postscript then an error message is left in the interp's * result, replacing whatever used to be there. If no error occurs, then * Postscript for the item is appended to the result. * * Side effects: * None. * *-------------------------------------------------------------- */ static int LineToPostscript( Tcl_Interp *interp, /* Leave Postscript or error message here. */ Tk_Canvas canvas, /* Information about overall canvas. */ Tk_Item *itemPtr, /* Item for which Postscript is wanted. */ int prepass) /* 1 means this is a prepass to collect font * information; 0 means final Postscript is * being created. */ { LineItem *linePtr = (LineItem *) itemPtr; int style; double width; XColor *color; Pixmap stipple; Tk_State state = itemPtr->state; Tcl_Obj *psObj; Tcl_InterpState interpState; if (state == TK_STATE_NULL) { state = Canvas(canvas)->canvas_state; } width = linePtr->outline.width; color = linePtr->outline.color; stipple = linePtr->outline.stipple; if (Canvas(canvas)->currentItemPtr == itemPtr) { if (linePtr->outline.activeWidth > width) { width = linePtr->outline.activeWidth; } if (linePtr->outline.activeColor != NULL) { color = linePtr->outline.activeColor; } if (linePtr->outline.activeStipple != None) { stipple = linePtr->outline.activeStipple; } } else if (state == TK_STATE_DISABLED) { if (linePtr->outline.disabledWidth > 0) { width = linePtr->outline.disabledWidth; } if (linePtr->outline.disabledColor != NULL) { color = linePtr->outline.disabledColor; } if (linePtr->outline.disabledStipple != None) { stipple = linePtr->outline.disabledStipple; } } if (color == NULL || linePtr->numPoints < 1 || linePtr->coordPtr == NULL){ return TCL_OK; } /* * Make our working space. */ psObj = Tcl_NewObj(); interpState = Tcl_SaveInterpState(interp, TCL_OK); /* * Check if we're just doing a "pixel". */ if (linePtr->numPoints == 1) { Tcl_AppendToObj(psObj, "matrix currentmatrix\n", -1); Tcl_AppendPrintfToObj(psObj, "%.15g %.15g translate %.15g %.15g", linePtr->coordPtr[0], Tk_CanvasPsY(canvas, linePtr->coordPtr[1]), width/2.0, width/2.0); Tcl_AppendToObj(psObj, " scale 1 0 moveto 0 0 1 0 360 arc\nsetmatrix\n", -1); Tcl_ResetResult(interp); if (Tk_CanvasPsColor(interp, canvas, color) != TCL_OK) { goto error; } Tcl_AppendObjToObj(psObj, Tcl_GetObjResult(interp)); if (stipple != None) { Tcl_AppendToObj(psObj, "clip ", -1); Tcl_ResetResult(interp); if (Tk_CanvasPsStipple(interp, canvas, stipple) != TCL_OK) { goto error; } Tcl_AppendObjToObj(psObj, Tcl_GetObjResult(interp)); } else { Tcl_AppendToObj(psObj, "fill\n", -1); } goto done; } /* * Generate a path for the line's center-line (do this differently for * straight lines and smoothed lines). */ Tcl_ResetResult(interp); if ((!linePtr->smooth) || (linePtr->numPoints < 3)) { Tk_CanvasPsPath(interp, canvas, linePtr->coordPtr, linePtr->numPoints); } else if ((stipple == None) && linePtr->smooth->postscriptProc) { linePtr->smooth->postscriptProc(interp, canvas, linePtr->coordPtr, linePtr->numPoints, linePtr->splineSteps); } else { /* * Special hack: Postscript printers don't appear to be able to turn a * path drawn with "curveto"s into a clipping path without exceeding * resource limits, so TkMakeBezierPostscript won't work for stippled * curves. Instead, generate all of the intermediate points here and * output them into the Postscript file with "lineto"s instead. */ double staticPoints[2*MAX_STATIC_POINTS]; double *pointPtr; int numPoints; numPoints = linePtr->smooth->coordProc(canvas, NULL, linePtr->numPoints, linePtr->splineSteps, NULL, NULL); pointPtr = staticPoints; if (numPoints > MAX_STATIC_POINTS) { pointPtr = ckalloc(numPoints * 2 * sizeof(double)); } numPoints = linePtr->smooth->coordProc(canvas, linePtr->coordPtr, linePtr->numPoints, linePtr->splineSteps, NULL, pointPtr); Tk_CanvasPsPath(interp, canvas, pointPtr, numPoints); if (pointPtr != staticPoints) { ckfree(pointPtr); } } Tcl_AppendObjToObj(psObj, Tcl_GetObjResult(interp)); /* * Set other line-drawing parameters and stroke out the line. */ if (linePtr->capStyle == CapRound) { style = 1; } else if (linePtr->capStyle == CapProjecting) { style = 2; } else { style = 0; } Tcl_AppendPrintfToObj(psObj, "%d setlinecap\n", style); if (linePtr->joinStyle == JoinRound) { style = 1; } else if (linePtr->joinStyle == JoinBevel) { style = 2; } else { style = 0; } Tcl_AppendPrintfToObj(psObj, "%d setlinejoin\n", style); Tcl_ResetResult(interp); if (Tk_CanvasPsOutline(canvas, itemPtr, &linePtr->outline) != TCL_OK) { goto error; } Tcl_AppendObjToObj(psObj, Tcl_GetObjResult(interp)); /* * Output polygons for the arrowheads, if there are any. */ if (linePtr->firstArrowPtr != NULL) { if (stipple != None) { Tcl_AppendToObj(psObj, "grestore gsave\n", -1); } if (ArrowheadPostscript(interp, canvas, linePtr, linePtr->firstArrowPtr, psObj) != TCL_OK) { goto error; } } if (linePtr->lastArrowPtr != NULL) { if (stipple != None) { Tcl_AppendToObj(psObj, "grestore gsave\n", -1); } if (ArrowheadPostscript(interp, canvas, linePtr, linePtr->lastArrowPtr, psObj) != TCL_OK) { goto error; } } /* * Plug the accumulated postscript back into the result. */ done: (void) Tcl_RestoreInterpState(interp, interpState); Tcl_AppendObjToObj(Tcl_GetObjResult(interp), psObj); Tcl_DecrRefCount(psObj); return TCL_OK; error: Tcl_DiscardInterpState(interpState); Tcl_DecrRefCount(psObj); return TCL_ERROR; } /* *-------------------------------------------------------------- * * ArrowheadPostscript -- * * This function is called to generate Postscript for an arrowhead for a * line item. * * Results: * The return value is a standard Tcl result. If an error occurs in * generating Postscript then an error message is left in the interp's * result, replacing whatever used to be there. If no error occurs, then * Postscript for the arrowhead is appended to the given object. * * Side effects: * None. * *-------------------------------------------------------------- */ static int ArrowheadPostscript( Tcl_Interp *interp, /* Leave error message here; non-error results * will be discarded by caller. */ Tk_Canvas canvas, /* Information about overall canvas. */ LineItem *linePtr, /* Line item for which Postscript is being * generated. */ double *arrowPtr, /* Pointer to first of five points describing * arrowhead polygon. */ Tcl_Obj *psObj) /* Append postscript to this object. */ { Pixmap stipple; Tk_State state = linePtr->header.state; if (state == TK_STATE_NULL) { state = Canvas(canvas)->canvas_state; } stipple = linePtr->outline.stipple; if (Canvas(canvas)->currentItemPtr == (Tk_Item *) linePtr) { if (linePtr->outline.activeStipple!=None) { stipple = linePtr->outline.activeStipple; } } else if (state == TK_STATE_DISABLED) { if (linePtr->outline.activeStipple!=None) { stipple = linePtr->outline.disabledStipple; } } Tcl_ResetResult(interp); Tk_CanvasPsPath(interp, canvas, arrowPtr, PTS_IN_ARROW); Tcl_AppendObjToObj(psObj, Tcl_GetObjResult(interp)); if (stipple != None) { Tcl_AppendToObj(psObj, "clip ", -1); Tcl_ResetResult(interp); if (Tk_CanvasPsStipple(interp, canvas, stipple) != TCL_OK) { return TCL_ERROR; } Tcl_AppendObjToObj(psObj, Tcl_GetObjResult(interp)); } else { Tcl_AppendToObj(psObj, "fill\n", -1); } return TCL_OK; } /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */