/* * tkGrid.c -- * * Grid based geometry manager. * * Copyright (c) 1996-1997 by Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tkInt.h" /* * Convenience Macros */ #ifdef MAX # undef MAX #endif #define MAX(x,y) ((x) > (y) ? (x) : (y)) #define COLUMN (1) /* Working on column offsets. */ #define ROW (2) /* Working on row offsets. */ #define CHECK_ONLY (1) /* Check max slot constraint. */ #define CHECK_SPACE (2) /* Alloc more space, don't change max. */ /* * Pre-allocate enough row and column slots for "typical" sized tables this * value should be chosen so by the time the extra malloc's are required, the * layout calculations overwehlm them. [A "slot" contains information for * either a row or column, depending upon the context.] */ #define TYPICAL_SIZE 25 /* (Arbitrary guess) */ #define PREALLOC 10 /* Extra slots to allocate. */ /* * Pre-allocate room for uniform groups during layout. */ #define UNIFORM_PREALLOC 10 /* * Data structures are allocated dynamically to support arbitrary sized * tables. However, the space is proportional to the highest numbered slot * with some non-default property. This limit is used to head off mistakes and * denial of service attacks by limiting the amount of storage required. */ #define MAX_ELEMENT 10000 /* * Special characters to support relative layouts. */ #define REL_SKIP 'x' /* Skip this column. */ #define REL_HORIZ '-' /* Extend previous widget horizontally. */ #define REL_VERT '^' /* Extend widget from row above. */ /* * Default value for 'grid anchor'. */ #define GRID_DEFAULT_ANCHOR TK_ANCHOR_NW /* * Structure to hold information for grid containers. A slot is either a row or * column. */ typedef struct SlotInfo { int minSize; /* The minimum size of this slot (in pixels). * It is set via the rowconfigure or * columnconfigure commands. */ int weight; /* The resize weight of this slot. (0) means * this slot doesn't resize. Extra space in * the layout is given distributed among slots * inproportion to their weights. */ int pad; /* Extra padding, in pixels, required for this * slot. This amount is "added" to the largest * content in the slot. */ Tk_Uid uniform; /* Value of -uniform option. It is used to * group slots that should have the same * size. */ int offset; /* This is a cached value used for * introspection. It is the pixel offset of * the right or bottom edge of this slot from * the beginning of the layout. */ int temp; /* This is a temporary value used for * calculating adjusted weights when shrinking * the layout below its nominal size. */ } SlotInfo; /* * Structure to hold information during layout calculations. There is one of * these for each slot, an array for each of the rows or columns. */ typedef struct GridLayout { struct Gridder *binNextPtr; /* The next content window in this bin. Each bin * contains a list of all content whose spans * are >1 and whose right edges fall in this * slot. */ int minSize; /* Minimum size needed for this slot, in * pixels. This is the space required to hold * any content contained entirely in this slot, * adjusted for any slot constrants, such as * size or padding. */ int pad; /* Padding needed for this slot */ int weight; /* Slot weight, controls resizing. */ Tk_Uid uniform; /* Value of -uniform option. It is used to * group slots that should have the same * size. */ int minOffset; /* The minimum offset, in pixels, from the * beginning of the layout to the bottom/right * edge of the slot calculated from top/left * to bottom/right. */ int maxOffset; /* The maximum offset, in pixels, from the * beginning of the layout to the bottom/right * edge of the slot calculated from * bottom/right to top/left. */ } GridLayout; /* * Keep one of these for each geometry container. */ typedef struct { SlotInfo *columnPtr; /* Pointer to array of column constraints. */ SlotInfo *rowPtr; /* Pointer to array of row constraints. */ int columnEnd; /* The last column occupied by any content. */ int columnMax; /* The number of columns with constraints. */ int columnSpace; /* The number of slots currently allocated for * column constraints. */ int rowEnd; /* The last row occupied by any content. */ int rowMax; /* The number of rows with constraints. */ int rowSpace; /* The number of slots currently allocated for * row constraints. */ int startX; /* Pixel offset of this layout within its * container. */ int startY; /* Pixel offset of this layout within its * container. */ Tk_Anchor anchor; /* Value of anchor option: specifies where a * grid without weight should be placed. */ } GridContainer; /* * For each window that the grid cares about (either because the window is * managed by the grid or because the window has content that are managed by * the grid), there is a structure of the following type: */ typedef struct Gridder { Tk_Window tkwin; /* Tk token for window. NULL means that the * window has been deleted, but the gridder * hasn't had a chance to clean up yet because * the structure is still in use. */ struct Gridder *containerPtr; /* Container window within which this window is * managed (NULL means this window isn't * managed by the gridder). */ struct Gridder *nextPtr; /* Next window managed within same container. * List order doesn't matter. */ struct Gridder *contentPtr; /* First in list of content managed inside this * window (NULL means no grid content). */ GridContainer *containerDataPtr; /* Additional data for geometry container. */ Tcl_Obj *in; /* Store container name when removed. */ int column, row; /* Location in the grid (starting from * zero). */ int numCols, numRows; /* Number of columns or rows this content spans. * Should be at least 1. */ int padX, padY; /* Total additional pixels to leave around the * window. Some is of this space is on each * side. This is space *outside* the window: * we'll allocate extra space in frame but * won't enlarge window). */ int padLeft, padTop; /* The part of padX or padY to use on the left * or top of the widget, respectively. By * default, this is half of padX or padY. */ int iPadX, iPadY; /* Total extra pixels to allocate inside the * window (half this amount will appear on * each side). */ int sticky; /* which sides of its cavity this window * sticks to. See below for definitions */ int doubleBw; /* Twice the window's last known border width. * If this changes, the window must be * re-arranged within its container. */ int *abortPtr; /* If non-NULL, it means that there is a * nested call to ArrangeGrid already working * on this window. *abortPtr may be set to 1 * to abort that nested call. This happens, * for example, if tkwin or any of its content * is deleted. */ int flags; /* Miscellaneous flags; see below for * definitions. */ /* * These fields are used temporarily for layout calculations only. */ struct Gridder *binNextPtr; /* Link to next span>1 content in this bin. */ int size; /* Nominal size (width or height) in pixels of * the content. This includes the padding. */ } Gridder; /* * Flag values for "sticky"ness. The 16 combinations subsume the packer's * notion of anchor and fill. * * STICK_NORTH This window sticks to the top of its cavity. * STICK_EAST This window sticks to the right edge of its * cavity. * STICK_SOUTH This window sticks to the bottom of its cavity. * STICK_WEST This window sticks to the left edge of its * cavity. */ #define STICK_NORTH 1 #define STICK_EAST 2 #define STICK_SOUTH 4 #define STICK_WEST 8 /* * Structure to gather information about uniform groups during layout. */ typedef struct UniformGroup { Tk_Uid group; int minSize; } UniformGroup; /* * Flag values for Grid structures: * * REQUESTED_RELAYOUT 1 means a Tcl_DoWhenIdle request has already * been made to re-arrange all the content of this * window. * DONT_PROPAGATE 1 means don't set this window's requested * size. 0 means if this window is a container then * Tk will set its requested size to fit the * needs of its content. * ALLOCED_CONTAINER 1 means that Grid has allocated itself as * geometry container for this window. */ #define REQUESTED_RELAYOUT 1 #define DONT_PROPAGATE 2 #define ALLOCED_CONTAINER 4 /* * Prototypes for procedures used only in this file: */ static void AdjustForSticky(Gridder *contentPtr, int *xPtr, int *yPtr, int *widthPtr, int *heightPtr); static int AdjustOffsets(int width, int elements, SlotInfo *slotPtr); static void ArrangeGrid(ClientData clientData); static int CheckSlotData(Gridder *containerPtr, int slot, int slotType, int checkOnly); static int ConfigureContent(Tcl_Interp *interp, Tk_Window tkwin, int objc, Tcl_Obj *const objv[]); static Tcl_FreeProc DestroyGrid; static Gridder * GetGrid(Tk_Window tkwin); static int GridAnchorCommand(Tk_Window tkwin, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int GridBboxCommand(Tk_Window tkwin, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int GridForgetRemoveCommand(Tk_Window tkwin, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int GridInfoCommand(Tk_Window tkwin, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int GridLocationCommand(Tk_Window tkwin, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int GridPropagateCommand(Tk_Window tkwin, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int GridRowColumnConfigureCommand(Tk_Window tkwin, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int GridSizeCommand(Tk_Window tkwin, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int GridContentCommand(Tk_Window tkwin, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static void GridStructureProc(ClientData clientData, XEvent *eventPtr); static void GridLostContentProc(ClientData clientData, Tk_Window tkwin); static void GridReqProc(ClientData clientData, Tk_Window tkwin); static void InitContainerData(Gridder *containerPtr); static Tcl_Obj * NewPairObj(int, int); static Tcl_Obj * NewQuadObj(int, int, int, int); static int ResolveConstraints(Gridder *gridPtr, int rowOrColumn, int maxOffset); static void SetGridSize(Gridder *gridPtr); static int SetContentColumn(Tcl_Interp *interp, Gridder *contentPtr, int column, int numCols); static int SetContentRow(Tcl_Interp *interp, Gridder *contentPtr, int row, int numRows); static Tcl_Obj * StickyToObj(int flags); static int StringToSticky(const char *string); static void Unlink(Gridder *gridPtr); static const Tk_GeomMgr gridMgrType = { "grid", /* name */ GridReqProc, /* requestProc */ GridLostContentProc, /* lostSlaveProc */ }; /* *---------------------------------------------------------------------- * * Tk_GridCmd -- * * This procedure is invoked to process the "grid" Tcl command. See the * user documentation for details on what it does. * * Results: * A standard Tcl result. * * Side effects: * See the user documentation. * *---------------------------------------------------------------------- */ int Tk_GridObjCmd( ClientData clientData, /* Main window associated with interpreter. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tk_Window tkwin = (Tk_Window)clientData; static const char *const optionStrings[] = { "anchor", "bbox", "columnconfigure", "configure", "content", "forget", "info", "location", "propagate", "remove", "rowconfigure", "size", "slaves", NULL }; enum options { GRID_ANCHOR, GRID_BBOX, GRID_COLUMNCONFIGURE, GRID_CONFIGURE, GRID_CONTENT, GRID_FORGET, GRID_INFO, GRID_LOCATION, GRID_PROPAGATE, GRID_REMOVE, GRID_ROWCONFIGURE, GRID_SIZE, GRID_SLAVES }; int index; if (objc >= 2) { const char *argv1 = Tcl_GetString(objv[1]); if ((argv1[0] == '.') || (argv1[0] == REL_SKIP) || (argv1[0] == REL_VERT)) { return ConfigureContent(interp, tkwin, objc-1, objv+1); } } if (objc < 3) { Tcl_WrongNumArgs(interp, 1, objv, "option arg ?arg ...?"); return TCL_ERROR; } if (Tcl_GetIndexFromObjStruct(interp, objv[1], optionStrings, sizeof(char *), "option", 0, &index) != TCL_OK) { return TCL_ERROR; } switch ((enum options) index) { case GRID_ANCHOR: return GridAnchorCommand(tkwin, interp, objc, objv); case GRID_BBOX: return GridBboxCommand(tkwin, interp, objc, objv); case GRID_CONFIGURE: return ConfigureContent(interp, tkwin, objc-2, objv+2); case GRID_FORGET: case GRID_REMOVE: return GridForgetRemoveCommand(tkwin, interp, objc, objv); case GRID_INFO: return GridInfoCommand(tkwin, interp, objc, objv); case GRID_LOCATION: return GridLocationCommand(tkwin, interp, objc, objv); case GRID_PROPAGATE: return GridPropagateCommand(tkwin, interp, objc, objv); case GRID_SIZE: return GridSizeCommand(tkwin, interp, objc, objv); case GRID_SLAVES: case GRID_CONTENT: return GridContentCommand(tkwin, interp, objc, objv); /* * Sample argument combinations: * grid columnconfigure -option * grid columnconfigure -option value -option value * grid rowconfigure * grid rowconfigure -option * grid rowconfigure -option value -option value. */ case GRID_COLUMNCONFIGURE: case GRID_ROWCONFIGURE: return GridRowColumnConfigureCommand(tkwin, interp, objc, objv); } /* This should not happen */ Tcl_SetObjResult(interp, Tcl_NewStringObj("internal error in grid", -1)); Tcl_SetErrorCode(interp, "TK", "API_ABUSE", NULL); return TCL_ERROR; } /* *---------------------------------------------------------------------- * * GridAnchorCommand -- * * Implementation of the [grid anchor] subcommand. See the user * documentation for details on what it does. * * Results: * Standard Tcl result. * * Side effects: * May recompute grid geometry. * *---------------------------------------------------------------------- */ static int GridAnchorCommand( Tk_Window tkwin, /* Main window of the application. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tk_Window container; Gridder *containerPtr; GridContainer *gridPtr; Tk_Anchor old; if (objc > 4) { Tcl_WrongNumArgs(interp, 2, objv, "window ?anchor?"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &container) != TCL_OK) { return TCL_ERROR; } containerPtr = GetGrid(container); if (objc == 3) { gridPtr = containerPtr->containerDataPtr; Tcl_SetObjResult(interp, Tcl_NewStringObj( Tk_NameOfAnchor(gridPtr?gridPtr->anchor:GRID_DEFAULT_ANCHOR), -1)); return TCL_OK; } InitContainerData(containerPtr); gridPtr = containerPtr->containerDataPtr; old = gridPtr->anchor; if (Tk_GetAnchorFromObj(interp, objv[3], &gridPtr->anchor) != TCL_OK) { return TCL_ERROR; } /* * Only request a relayout if the anchor changes. */ if (old != gridPtr->anchor) { if (containerPtr->abortPtr != NULL) { *containerPtr->abortPtr = 1; } if (!(containerPtr->flags & REQUESTED_RELAYOUT)) { containerPtr->flags |= REQUESTED_RELAYOUT; Tcl_DoWhenIdle(ArrangeGrid, containerPtr); } } return TCL_OK; } /* *---------------------------------------------------------------------- * * GridBboxCommand -- * * Implementation of the [grid bbox] subcommand. * * Results: * Standard Tcl result. * * Side effects: * Places bounding box information in the interp's result field. * *---------------------------------------------------------------------- */ static int GridBboxCommand( Tk_Window tkwin, /* Main window of the application. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tk_Window container; Gridder *containerPtr; /* container grid record */ GridContainer *gridPtr; /* pointer to grid data */ int row, column; /* origin for bounding box */ int row2, column2; /* end of bounding box */ int endX, endY; /* last column/row in the layout */ int x=0, y=0; /* starting pixels for this bounding box */ int width, height; /* size of the bounding box */ if (objc!=3 && objc != 5 && objc != 7) { Tcl_WrongNumArgs(interp, 2, objv, "master ?column row ?column row??"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &container) != TCL_OK) { return TCL_ERROR; } containerPtr = GetGrid(container); if (objc >= 5) { if (Tcl_GetIntFromObj(interp, objv[3], &column) != TCL_OK) { return TCL_ERROR; } if (Tcl_GetIntFromObj(interp, objv[4], &row) != TCL_OK) { return TCL_ERROR; } column2 = column; row2 = row; } if (objc == 7) { if (Tcl_GetIntFromObj(interp, objv[5], &column2) != TCL_OK) { return TCL_ERROR; } if (Tcl_GetIntFromObj(interp, objv[6], &row2) != TCL_OK) { return TCL_ERROR; } } gridPtr = containerPtr->containerDataPtr; if (gridPtr == NULL) { Tcl_SetObjResult(interp, NewQuadObj(0, 0, 0, 0)); return TCL_OK; } SetGridSize(containerPtr); endX = MAX(gridPtr->columnEnd, gridPtr->columnMax); endY = MAX(gridPtr->rowEnd, gridPtr->rowMax); if ((endX == 0) || (endY == 0)) { Tcl_SetObjResult(interp, NewQuadObj(0, 0, 0, 0)); return TCL_OK; } if (objc == 3) { row = 0; column = 0; row2 = endY; column2 = endX; } if (column > column2) { int temp = column; column = column2; column2 = temp; } if (row > row2) { int temp = row; row = row2; row2 = temp; } if (column > 0 && column < endX) { x = gridPtr->columnPtr[column-1].offset; } else if (column > 0) { x = gridPtr->columnPtr[endX-1].offset; } if (row > 0 && row < endY) { y = gridPtr->rowPtr[row-1].offset; } else if (row > 0) { y = gridPtr->rowPtr[endY-1].offset; } if (column2 < 0) { width = 0; } else if (column2 >= endX) { width = gridPtr->columnPtr[endX-1].offset - x; } else { width = gridPtr->columnPtr[column2].offset - x; } if (row2 < 0) { height = 0; } else if (row2 >= endY) { height = gridPtr->rowPtr[endY-1].offset - y; } else { height = gridPtr->rowPtr[row2].offset - y; } Tcl_SetObjResult(interp, NewQuadObj( x + gridPtr->startX, y + gridPtr->startY, width, height)); return TCL_OK; } /* *---------------------------------------------------------------------- * * GridForgetRemoveCommand -- * * Implementation of the [grid forget]/[grid remove] subcommands. See the * user documentation for details on what these do. * * Results: * Standard Tcl result. * * Side effects: * Removes a window from a grid layout. * *---------------------------------------------------------------------- */ static int GridForgetRemoveCommand( Tk_Window tkwin, /* Main window of the application. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tk_Window content; Gridder *contentPtr; int i; const char *string = Tcl_GetString(objv[1]); char c = string[0]; for (i = 2; i < objc; i++) { if (TkGetWindowFromObj(interp, tkwin, objv[i], &content) != TCL_OK) { return TCL_ERROR; } contentPtr = GetGrid(content); if (contentPtr->containerPtr != NULL) { /* * For "forget", reset all the settings to their defaults */ if (c == 'f') { contentPtr->column = -1; contentPtr->row = -1; contentPtr->numCols = 1; contentPtr->numRows = 1; contentPtr->padX = 0; contentPtr->padY = 0; contentPtr->padLeft = 0; contentPtr->padTop = 0; contentPtr->iPadX = 0; contentPtr->iPadY = 0; if (contentPtr->in != NULL) { Tcl_DecrRefCount(contentPtr->in); contentPtr->in = NULL; } contentPtr->doubleBw = 2*Tk_Changes(tkwin)->border_width; if (contentPtr->flags & REQUESTED_RELAYOUT) { Tcl_CancelIdleCall(ArrangeGrid, contentPtr); } contentPtr->flags = 0; contentPtr->sticky = 0; } else { /* * When removing, store name of container to be able to * restore it later, even if the container is recreated. */ if (contentPtr->in != NULL) { Tcl_DecrRefCount(contentPtr->in); contentPtr->in = NULL; } if (contentPtr->containerPtr != NULL) { contentPtr->in = Tcl_NewStringObj( Tk_PathName(contentPtr->containerPtr->tkwin), -1); Tcl_IncrRefCount(contentPtr->in); } } Tk_ManageGeometry(content, NULL, NULL); if (contentPtr->containerPtr->tkwin != Tk_Parent(contentPtr->tkwin)) { Tk_UnmaintainGeometry(contentPtr->tkwin, contentPtr->containerPtr->tkwin); } Unlink(contentPtr); Tk_UnmapWindow(contentPtr->tkwin); } } return TCL_OK; } /* *---------------------------------------------------------------------- * * GridInfoCommand -- * * Implementation of the [grid info] subcommand. See the user * documentation for details on what it does. * * Results: * Standard Tcl result. * * Side effects: * Puts gridding information in the interpreter's result. * *---------------------------------------------------------------------- */ static int GridInfoCommand( Tk_Window tkwin, /* Main window of the application. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Gridder *contentPtr; Tk_Window content; Tcl_Obj *infoObj; if (objc != 3) { Tcl_WrongNumArgs(interp, 2, objv, "window"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &content) != TCL_OK) { return TCL_ERROR; } contentPtr = GetGrid(content); if (contentPtr->containerPtr == NULL) { Tcl_ResetResult(interp); return TCL_OK; } infoObj = Tcl_NewObj(); Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-in", -1), TkNewWindowObj(contentPtr->containerPtr->tkwin)); Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-column", -1), Tcl_NewIntObj(contentPtr->column)); Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-row", -1), Tcl_NewIntObj(contentPtr->row)); Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-columnspan", -1), Tcl_NewIntObj(contentPtr->numCols)); Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-rowspan", -1), Tcl_NewIntObj(contentPtr->numRows)); TkAppendPadAmount(infoObj, "-ipadx", contentPtr->iPadX/2, contentPtr->iPadX); TkAppendPadAmount(infoObj, "-ipady", contentPtr->iPadY/2, contentPtr->iPadY); TkAppendPadAmount(infoObj, "-padx", contentPtr->padLeft, contentPtr->padX); TkAppendPadAmount(infoObj, "-pady", contentPtr->padTop, contentPtr->padY); Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-sticky", -1), StickyToObj(contentPtr->sticky)); Tcl_SetObjResult(interp, infoObj); return TCL_OK; } /* *---------------------------------------------------------------------- * * GridLocationCommand -- * * Implementation of the [grid location] subcommand. See the user * documentation for details on what it does. * * Results: * Standard Tcl result. * * Side effects: * Puts location information in the interpreter's result field. * *---------------------------------------------------------------------- */ static int GridLocationCommand( Tk_Window tkwin, /* Main window of the application. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tk_Window container; Gridder *containerPtr; /* Container grid record. */ GridContainer *gridPtr; /* Pointer to grid data. */ SlotInfo *slotPtr; int x, y; /* Offset in pixels, from edge of container. */ int i, j; /* Corresponding column and row indeces. */ int endX, endY; /* End of grid. */ if (objc != 5) { Tcl_WrongNumArgs(interp, 2, objv, "master x y"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &container) != TCL_OK) { return TCL_ERROR; } if (Tk_GetPixelsFromObj(interp, container, objv[3], &x) != TCL_OK) { return TCL_ERROR; } if (Tk_GetPixelsFromObj(interp, container, objv[4], &y) != TCL_OK) { return TCL_ERROR; } containerPtr = GetGrid(container); if (containerPtr->containerDataPtr == NULL) { Tcl_SetObjResult(interp, NewPairObj(-1, -1)); return TCL_OK; } gridPtr = containerPtr->containerDataPtr; /* * Update any pending requests. This is not always the steady state value, * as more configure events could be in the pipeline, but its as close as * its easy to get. */ while (containerPtr->flags & REQUESTED_RELAYOUT) { Tcl_CancelIdleCall(ArrangeGrid, containerPtr); ArrangeGrid(containerPtr); } SetGridSize(containerPtr); endX = MAX(gridPtr->columnEnd, gridPtr->columnMax); endY = MAX(gridPtr->rowEnd, gridPtr->rowMax); slotPtr = containerPtr->containerDataPtr->columnPtr; if (x < containerPtr->containerDataPtr->startX) { i = -1; } else { x -= containerPtr->containerDataPtr->startX; for (i = 0; slotPtr[i].offset < x && i < endX; i++) { /* null body */ } } slotPtr = containerPtr->containerDataPtr->rowPtr; if (y < containerPtr->containerDataPtr->startY) { j = -1; } else { y -= containerPtr->containerDataPtr->startY; for (j = 0; slotPtr[j].offset < y && j < endY; j++) { /* null body */ } } Tcl_SetObjResult(interp, NewPairObj(i, j)); return TCL_OK; } /* *---------------------------------------------------------------------- * * GridPropagateCommand -- * * Implementation of the [grid propagate] subcommand. See the user * documentation for details on what it does. * * Results: * Standard Tcl result. * * Side effects: * May alter geometry propagation for a widget. * *---------------------------------------------------------------------- */ static int GridPropagateCommand( Tk_Window tkwin, /* Main window of the application. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tk_Window container; Gridder *containerPtr; int propagate, old; if (objc > 4) { Tcl_WrongNumArgs(interp, 2, objv, "window ?boolean?"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &container) != TCL_OK) { return TCL_ERROR; } containerPtr = GetGrid(container); if (objc == 3) { Tcl_SetObjResult(interp, Tcl_NewBooleanObj(!(containerPtr->flags & DONT_PROPAGATE))); return TCL_OK; } if (Tcl_GetBooleanFromObj(interp, objv[3], &propagate) != TCL_OK) { return TCL_ERROR; } /* * Only request a relayout if the propagation bit changes. */ old = !(containerPtr->flags & DONT_PROPAGATE); if (propagate != old) { if (propagate) { /* * If we have content, we need to register as geometry container. */ if (containerPtr->contentPtr != NULL) { if (TkSetGeometryContainer(interp, container, "grid") != TCL_OK) { return TCL_ERROR; } containerPtr->flags |= ALLOCED_CONTAINER; } containerPtr->flags &= ~DONT_PROPAGATE; } else { if (containerPtr->flags & ALLOCED_CONTAINER) { TkFreeGeometryContainer(container, "grid"); containerPtr->flags &= ~ALLOCED_CONTAINER; } containerPtr->flags |= DONT_PROPAGATE; } /* * Re-arrange the container to allow new geometry information to * propagate upwards to the container's container. */ if (containerPtr->abortPtr != NULL) { *containerPtr->abortPtr = 1; } if (!(containerPtr->flags & REQUESTED_RELAYOUT)) { containerPtr->flags |= REQUESTED_RELAYOUT; Tcl_DoWhenIdle(ArrangeGrid, containerPtr); } } return TCL_OK; } /* *---------------------------------------------------------------------- * * GridRowColumnConfigureCommand -- * * Implementation of the [grid rowconfigure] and [grid columnconfigure] * subcommands. See the user documentation for details on what these do. * * Results: * Standard Tcl result. * * Side effects: * Depends on arguments; see user documentation. * *---------------------------------------------------------------------- */ static int GridRowColumnConfigureCommand( Tk_Window tkwin, /* Main window of the application. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tk_Window container, content; Gridder *containerPtr, *contentPtr; SlotInfo *slotPtr = NULL; int slot; /* the column or row number */ int slotType; /* COLUMN or ROW */ int size; /* the configuration value */ int lObjc; /* Number of items in index list */ Tcl_Obj **lObjv; /* array of indices */ int ok; /* temporary TCL result code */ int i, j, first, last; const char *string; static const char *const optionStrings[] = { "-minsize", "-pad", "-uniform", "-weight", NULL }; enum options { ROWCOL_MINSIZE, ROWCOL_PAD, ROWCOL_UNIFORM, ROWCOL_WEIGHT }; int index; Tcl_Obj *listCopy; if (((objc % 2 != 0) && (objc > 6)) || (objc < 4)) { Tcl_WrongNumArgs(interp, 2, objv, "master index ?-option value ...?"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &container) != TCL_OK) { return TCL_ERROR; } listCopy = Tcl_DuplicateObj(objv[3]); Tcl_IncrRefCount(listCopy); if (Tcl_ListObjGetElements(interp, listCopy, &lObjc, &lObjv) != TCL_OK) { Tcl_DecrRefCount(listCopy); return TCL_ERROR; } string = Tcl_GetString(objv[1]); slotType = (*string == 'c') ? COLUMN : ROW; if (lObjc == 0) { Tcl_SetObjResult(interp, Tcl_ObjPrintf("no %s indices specified", (slotType == COLUMN) ? "column" : "row")); Tcl_SetErrorCode(interp, "TK", "GRID", "NO_INDEX", NULL); Tcl_DecrRefCount(listCopy); return TCL_ERROR; } containerPtr = GetGrid(container); first = 0; last = 0; if ((objc == 4) || (objc == 5)) { if (lObjc != 1) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "must specify a single element on retrieval", -1)); Tcl_SetErrorCode(interp, "TK", "GRID", "USAGE", NULL); Tcl_DecrRefCount(listCopy); return TCL_ERROR; } if (Tcl_GetIntFromObj(interp, lObjv[0], &slot) != TCL_OK) { Tcl_AppendResult(interp, " (when retrieving options only integer indices are " "allowed)", NULL); Tcl_SetErrorCode(interp, "TK", "GRID", "INDEX_FORMAT", NULL); Tcl_DecrRefCount(listCopy); return TCL_ERROR; } ok = CheckSlotData(containerPtr, slot, slotType, /* checkOnly */ 1); if (ok == TCL_OK) { slotPtr = (slotType == COLUMN) ? containerPtr->containerDataPtr->columnPtr : containerPtr->containerDataPtr->rowPtr; } /* * Return all of the options for this row or column. If the request is * out of range, return all 0's. */ if (objc == 4) { int minsize = 0, pad = 0, weight = 0; Tk_Uid uniform = NULL; Tcl_Obj *res = Tcl_NewListObj(0, NULL); if (ok == TCL_OK) { minsize = slotPtr[slot].minSize; pad = slotPtr[slot].pad; weight = slotPtr[slot].weight; uniform = slotPtr[slot].uniform; } Tcl_ListObjAppendElement(interp, res, Tcl_NewStringObj("-minsize", -1)); Tcl_ListObjAppendElement(interp, res, Tcl_NewIntObj(minsize)); Tcl_ListObjAppendElement(interp, res, Tcl_NewStringObj("-pad", -1)); Tcl_ListObjAppendElement(interp, res, Tcl_NewIntObj(pad)); Tcl_ListObjAppendElement(interp, res, Tcl_NewStringObj("-uniform", -1)); Tcl_ListObjAppendElement(interp, res, Tcl_NewStringObj(uniform == NULL ? "" : uniform, -1)); Tcl_ListObjAppendElement(interp, res, Tcl_NewStringObj("-weight", -1)); Tcl_ListObjAppendElement(interp, res, Tcl_NewIntObj(weight)); Tcl_SetObjResult(interp, res); Tcl_DecrRefCount(listCopy); return TCL_OK; } /* * If only one option is given, with no value, the current value is * returned. */ if (Tcl_GetIndexFromObjStruct(interp, objv[4], optionStrings, sizeof(char *), "option", 0, &index) != TCL_OK) { Tcl_DecrRefCount(listCopy); return TCL_ERROR; } if (index == ROWCOL_MINSIZE) { Tcl_SetObjResult(interp, Tcl_NewIntObj( (ok == TCL_OK) ? slotPtr[slot].minSize : 0)); } else if (index == ROWCOL_WEIGHT) { Tcl_SetObjResult(interp, Tcl_NewIntObj( (ok == TCL_OK) ? slotPtr[slot].weight : 0)); } else if (index == ROWCOL_UNIFORM) { Tk_Uid value = (ok == TCL_OK) ? slotPtr[slot].uniform : ""; Tcl_SetObjResult(interp, Tcl_NewStringObj( (value == NULL) ? "" : value, -1)); } else if (index == ROWCOL_PAD) { Tcl_SetObjResult(interp, Tcl_NewIntObj( (ok == TCL_OK) ? slotPtr[slot].pad : 0)); } Tcl_DecrRefCount(listCopy); return TCL_OK; } for (j = 0; j < lObjc; j++) { int allContent = 0; if (Tcl_GetIntFromObj(NULL, lObjv[j], &slot) == TCL_OK) { first = slot; last = slot; contentPtr = NULL; } else if (strcmp(Tcl_GetString(lObjv[j]), "all") == 0) { /* * Make sure container is initialised. */ InitContainerData(containerPtr); contentPtr = containerPtr->contentPtr; if (contentPtr == NULL) { continue; } allContent = 1; } else if (TkGetWindowFromObj(NULL, tkwin, lObjv[j], &content) == TCL_OK) { /* * Is it gridded in this container? */ contentPtr = GetGrid(content); if (contentPtr->containerPtr != containerPtr) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "the window \"%s\" is not managed by \"%s\"", Tcl_GetString(lObjv[j]), Tcl_GetString(objv[2]))); Tcl_SetErrorCode(interp, "TK", "GRID", "NOT_MASTER", NULL); Tcl_DecrRefCount(listCopy); return TCL_ERROR; } } else { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "illegal index \"%s\"", Tcl_GetString(lObjv[j]))); Tcl_SetErrorCode(interp, "TK", "VALUE", "GRID_INDEX", NULL); Tcl_DecrRefCount(listCopy); return TCL_ERROR; } /* * The outer loop is only to handle "all". */ do { if (contentPtr != NULL) { first = (slotType == COLUMN) ? contentPtr->column : contentPtr->row; last = first - 1 + ((slotType == COLUMN) ? contentPtr->numCols : contentPtr->numRows); } for (slot = first; slot <= last; slot++) { ok = CheckSlotData(containerPtr, slot, slotType, /*checkOnly*/ 0); if (ok != TCL_OK) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "\"%s\" is out of range", Tcl_GetString(lObjv[j]))); Tcl_SetErrorCode(interp, "TK", "GRID", "INDEX_RANGE", NULL); Tcl_DecrRefCount(listCopy); return TCL_ERROR; } slotPtr = (slotType == COLUMN) ? containerPtr->containerDataPtr->columnPtr : containerPtr->containerDataPtr->rowPtr; /* * Loop through each option value pair, setting the values as * required. */ for (i = 4; i < objc; i += 2) { if (Tcl_GetIndexFromObjStruct(interp, objv[i], optionStrings, sizeof(char *), "option", 0, &index) != TCL_OK) { Tcl_DecrRefCount(listCopy); return TCL_ERROR; } if (index == ROWCOL_MINSIZE) { if (Tk_GetPixelsFromObj(interp, container, objv[i+1], &size) != TCL_OK) { Tcl_DecrRefCount(listCopy); return TCL_ERROR; } else { slotPtr[slot].minSize = size; } } else if (index == ROWCOL_WEIGHT) { int wt; if (Tcl_GetIntFromObj(interp,objv[i+1],&wt)!=TCL_OK) { Tcl_DecrRefCount(listCopy); return TCL_ERROR; } else if (wt < 0) { Tcl_DecrRefCount(listCopy); goto negativeIndex; } else { slotPtr[slot].weight = wt; } } else if (index == ROWCOL_UNIFORM) { slotPtr[slot].uniform = Tk_GetUid(Tcl_GetString(objv[i+1])); if (slotPtr[slot].uniform != NULL && slotPtr[slot].uniform[0] == 0) { slotPtr[slot].uniform = NULL; } } else if (index == ROWCOL_PAD) { if (Tk_GetPixelsFromObj(interp, container, objv[i+1], &size) != TCL_OK) { Tcl_DecrRefCount(listCopy); return TCL_ERROR; } else if (size < 0) { Tcl_DecrRefCount(listCopy); goto negativeIndex; } else { slotPtr[slot].pad = size; } } } } if (contentPtr != NULL) { contentPtr = contentPtr->nextPtr; } } while ((allContent == 1) && (contentPtr != NULL)); } Tcl_DecrRefCount(listCopy); /* * We changed a property, re-arrange the table, and check for constraint * shrinkage. A null slotPtr will occur for 'all' checks. */ if (slotPtr != NULL) { if (slotType == ROW) { last = containerPtr->containerDataPtr->rowMax - 1; while ((last >= 0) && (slotPtr[last].weight == 0) && (slotPtr[last].pad == 0) && (slotPtr[last].minSize == 0) && (slotPtr[last].uniform == NULL)) { last--; } containerPtr->containerDataPtr->rowMax = last+1; } else { last = containerPtr->containerDataPtr->columnMax - 1; while ((last >= 0) && (slotPtr[last].weight == 0) && (slotPtr[last].pad == 0) && (slotPtr[last].minSize == 0) && (slotPtr[last].uniform == NULL)) { last--; } containerPtr->containerDataPtr->columnMax = last + 1; } } if (containerPtr->abortPtr != NULL) { *containerPtr->abortPtr = 1; } if (!(containerPtr->flags & REQUESTED_RELAYOUT)) { containerPtr->flags |= REQUESTED_RELAYOUT; Tcl_DoWhenIdle(ArrangeGrid, containerPtr); } return TCL_OK; negativeIndex: Tcl_SetObjResult(interp, Tcl_ObjPrintf( "invalid arg \"%s\": should be non-negative", Tcl_GetString(objv[i]))); Tcl_SetErrorCode(interp, "TK", "GRID", "NEG_INDEX", NULL); return TCL_ERROR; } /* *---------------------------------------------------------------------- * * GridSizeCommand -- * * Implementation of the [grid size] subcommand. See the user * documentation for details on what it does. * * Results: * Standard Tcl result. * * Side effects: * Puts grid size information in the interpreter's result. * *---------------------------------------------------------------------- */ static int GridSizeCommand( Tk_Window tkwin, /* Main window of the application. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tk_Window container; Gridder *containerPtr; GridContainer *gridPtr; /* pointer to grid data */ if (objc != 3) { Tcl_WrongNumArgs(interp, 2, objv, "window"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &container) != TCL_OK) { return TCL_ERROR; } containerPtr = GetGrid(container); if (containerPtr->containerDataPtr != NULL) { SetGridSize(containerPtr); gridPtr = containerPtr->containerDataPtr; Tcl_SetObjResult(interp, NewPairObj( MAX(gridPtr->columnEnd, gridPtr->columnMax), MAX(gridPtr->rowEnd, gridPtr->rowMax))); } else { Tcl_SetObjResult(interp, NewPairObj(0, 0)); } return TCL_OK; } /* *---------------------------------------------------------------------- * * GridContentCommand -- * * Implementation of the [grid content] subcommand. See the user * documentation for details on what it does. * * Results: * Standard Tcl result. * * Side effects: * Places a list of content windows of the specified window in the * interpreter's result field. * *---------------------------------------------------------------------- */ static int GridContentCommand( Tk_Window tkwin, /* Main window of the application. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tk_Window container; Gridder *containerPtr; /* container grid record */ Gridder *contentPtr; int i, value, index; int row = -1, column = -1; static const char *const optionStrings[] = { "-column", "-row", NULL }; enum options { CONTENT_COLUMN, CONTENT_ROW }; Tcl_Obj *res; if ((objc < 3) || ((objc % 2) == 0)) { Tcl_WrongNumArgs(interp, 2, objv, "window ?-option value ...?"); return TCL_ERROR; } for (i = 3; i < objc; i += 2) { if (Tcl_GetIndexFromObjStruct(interp, objv[i], optionStrings, sizeof(char *), "option", 0, &index) != TCL_OK) { return TCL_ERROR; } if (Tcl_GetIntFromObj(interp, objv[i+1], &value) != TCL_OK) { return TCL_ERROR; } if (value < 0) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "%d is an invalid value: should NOT be < 0", value)); Tcl_SetErrorCode(interp, "TK", "GRID", "NEG_INDEX", NULL); return TCL_ERROR; } if (index == CONTENT_COLUMN) { column = value; } else { row = value; } } if (TkGetWindowFromObj(interp, tkwin, objv[2], &container) != TCL_OK) { return TCL_ERROR; } containerPtr = GetGrid(container); res = Tcl_NewListObj(0, NULL); for (contentPtr = containerPtr->contentPtr; contentPtr != NULL; contentPtr = contentPtr->nextPtr) { if ((column >= 0) && (contentPtr->column > column || contentPtr->column+contentPtr->numCols-1 < column)) { continue; } if ((row >= 0) && (contentPtr->row > row || contentPtr->row+contentPtr->numRows-1 < row)) { continue; } Tcl_ListObjAppendElement(interp,res, TkNewWindowObj(contentPtr->tkwin)); } Tcl_SetObjResult(interp, res); return TCL_OK; } /* *---------------------------------------------------------------------- * * GridReqProc -- * * This procedure is invoked by Tk_GeometryRequest for windows managed by * the grid. * * Results: * None. * * Side effects: * Arranges for tkwin, and all its managed siblings, to be re-arranged at * the next idle point. * *---------------------------------------------------------------------- */ static void GridReqProc( ClientData clientData, /* Grid's information about window that got * new preferred geometry. */ TCL_UNUSED(Tk_Window)) /* Other Tk-related information about the * window. */ { Gridder *gridPtr = (Gridder *)clientData; gridPtr = gridPtr->containerPtr; if (gridPtr && !(gridPtr->flags & REQUESTED_RELAYOUT)) { gridPtr->flags |= REQUESTED_RELAYOUT; Tcl_DoWhenIdle(ArrangeGrid, gridPtr); } } /* *---------------------------------------------------------------------- * * GridLostContentProc -- * * This procedure is invoked by Tk whenever some other geometry claims * control over a content that used to be managed by us. * * Results: * None. * * Side effects: * Forgets all grid-related information about the content. * *---------------------------------------------------------------------- */ static void GridLostContentProc( ClientData clientData, /* Grid structure for content window that was * stolen away. */ TCL_UNUSED(Tk_Window)) /* Tk's handle for the content window. */ { Gridder *contentPtr = (Gridder *)clientData; if (contentPtr->containerPtr->tkwin != Tk_Parent(contentPtr->tkwin)) { Tk_UnmaintainGeometry(contentPtr->tkwin, contentPtr->containerPtr->tkwin); } Unlink(contentPtr); Tk_UnmapWindow(contentPtr->tkwin); } /* *---------------------------------------------------------------------- * * AdjustOffsets -- * * This procedure adjusts the size of the layout to fit in the space * provided. If it needs more space, the extra is added according to the * weights. If it needs less, the space is removed according to the * weights, but at no time does the size drop below the minsize specified * for that slot. * * Results: * The size used by the layout. * * Side effects: * The slot offsets are modified to shrink the layout. * *---------------------------------------------------------------------- */ static int AdjustOffsets( int size, /* The total layout size (in pixels). */ int slots, /* Number of slots. */ SlotInfo *slotPtr) /* Pointer to slot array. */ { int slot; /* Current slot. */ int diff; /* Extra pixels needed to add to the layout. */ int totalWeight; /* Sum of the weights for all the slots. */ int weight; /* Sum of the weights so far. */ int minSize; /* Minimum possible layout size. */ int newDiff; /* The most pixels that can be added on the * current pass. */ diff = size - slotPtr[slots-1].offset; /* * The layout is already the correct size; all done. */ if (diff == 0) { return size; } /* * If all the weights are zero, there is nothing more to do. */ totalWeight = 0; for (slot = 0; slot < slots; slot++) { totalWeight += slotPtr[slot].weight; } if (totalWeight == 0) { return slotPtr[slots-1].offset; } /* * Add extra space according to the slot weights. This is done * cumulatively to prevent round-off error accumulation. */ if (diff > 0) { weight = 0; for (slot = 0; slot < slots; slot++) { weight += slotPtr[slot].weight; slotPtr[slot].offset += diff * weight / totalWeight; } return size; } /* * The layout must shrink below its requested size. Compute the minimum * possible size by looking at the slot minSizes. Store each slot's * minimum size in temp. */ minSize = 0; for (slot = 0; slot < slots; slot++) { if (slotPtr[slot].weight > 0) { slotPtr[slot].temp = slotPtr[slot].minSize; } else if (slot > 0) { slotPtr[slot].temp = slotPtr[slot].offset - slotPtr[slot-1].offset; } else { slotPtr[slot].temp = slotPtr[slot].offset; } minSize += slotPtr[slot].temp; } /* * If the requested size is less than the minimum required size, set the * slot sizes to their minimum values. */ if (size <= minSize) { int offset = 0; for (slot = 0; slot < slots; slot++) { offset += slotPtr[slot].temp; slotPtr[slot].offset = offset; } return minSize; } /* * Remove space from slots according to their weights. The weights get * renormalized anytime a slot shrinks to its minimum size. */ while (diff < 0) { /* * Find the total weight for the shrinkable slots. */ totalWeight = 0; for (slot = 0; slot < slots; slot++) { int current = (slot == 0) ? slotPtr[slot].offset : slotPtr[slot].offset - slotPtr[slot-1].offset; if (current > slotPtr[slot].minSize) { totalWeight += slotPtr[slot].weight; slotPtr[slot].temp = slotPtr[slot].weight; } else { slotPtr[slot].temp = 0; } } if (totalWeight == 0) { break; } /* * Find the maximum amount of space we can distribute this pass. */ newDiff = diff; for (slot = 0; slot < slots; slot++) { int current; /* Current size of this slot. */ int maxDiff; /* Maximum diff that would cause this slot to * equal its minsize. */ if (slotPtr[slot].temp == 0) { continue; } current = (slot == 0) ? slotPtr[slot].offset : slotPtr[slot].offset - slotPtr[slot-1].offset; maxDiff = totalWeight * (slotPtr[slot].minSize - current) / slotPtr[slot].temp; if (maxDiff > newDiff) { newDiff = maxDiff; } } /* * Now distribute the space. */ weight = 0; for (slot = 0; slot < slots; slot++) { weight += slotPtr[slot].temp; slotPtr[slot].offset += newDiff * weight / totalWeight; } diff -= newDiff; } return size; } /* *---------------------------------------------------------------------- * * AdjustForSticky -- * * This procedure adjusts the size of a content in its cavity based on its * "sticky" flags. * * Results: * The input x, y, width, and height are changed to represent the desired * coordinates of the content. * * Side effects: * None. * *---------------------------------------------------------------------- */ static void AdjustForSticky( Gridder *contentPtr, /* Content window to arrange in its cavity. */ int *xPtr, /* Pixel location of the left edge of the cavity. */ int *yPtr, /* Pixel location of the top edge of the cavity. */ int *widthPtr, /* Width of the cavity (in pixels). */ int *heightPtr) /* Height of the cavity (in pixels). */ { int diffx = 0; /* Cavity width - content width. */ int diffy = 0; /* Cavity hight - content height. */ int sticky = contentPtr->sticky; *xPtr += contentPtr->padLeft; *widthPtr -= contentPtr->padX; *yPtr += contentPtr->padTop; *heightPtr -= contentPtr->padY; if (*widthPtr > (Tk_ReqWidth(contentPtr->tkwin) + contentPtr->iPadX)) { diffx = *widthPtr - (Tk_ReqWidth(contentPtr->tkwin) + contentPtr->iPadX); *widthPtr = Tk_ReqWidth(contentPtr->tkwin) + contentPtr->iPadX; } if (*heightPtr > (Tk_ReqHeight(contentPtr->tkwin) + contentPtr->iPadY)) { diffy = *heightPtr - (Tk_ReqHeight(contentPtr->tkwin) + contentPtr->iPadY); *heightPtr = Tk_ReqHeight(contentPtr->tkwin) + contentPtr->iPadY; } if (sticky&STICK_EAST && sticky&STICK_WEST) { *widthPtr += diffx; } if (sticky&STICK_NORTH && sticky&STICK_SOUTH) { *heightPtr += diffy; } if (!(sticky&STICK_WEST)) { *xPtr += (sticky&STICK_EAST) ? diffx : diffx/2; } if (!(sticky&STICK_NORTH)) { *yPtr += (sticky&STICK_SOUTH) ? diffy : diffy/2; } } /* *---------------------------------------------------------------------- * * ArrangeGrid -- * * This procedure is invoked (using the Tcl_DoWhenIdle mechanism) to * re-layout a set of windows managed by the grid. It is invoked at idle * time so that a series of grid requests can be merged into a single * layout operation. * * Results: * None. * * Side effects: * The content of containerPtr may get resized or moved. * *---------------------------------------------------------------------- */ static void ArrangeGrid( ClientData clientData) /* Structure describing container whose content * are to be re-layed out. */ { Gridder *containerPtr = (Gridder *)clientData; Gridder *contentPtr; GridContainer *slotPtr = containerPtr->containerDataPtr; int abort; int width, height; /* Requested size of layout, in pixels. */ int realWidth, realHeight; /* Actual size layout should take-up. */ int usedX, usedY; containerPtr->flags &= ~REQUESTED_RELAYOUT; /* * If the container has no content anymore, then don't change the container size. * Otherwise there is no way to "relinquish" control over the container * so another geometry manager can take over. */ if (containerPtr->contentPtr == NULL) { return; } if (containerPtr->containerDataPtr == NULL) { return; } /* * Abort any nested call to ArrangeGrid for this window, since we'll do * everything necessary here, and set up so this call can be aborted if * necessary. */ if (containerPtr->abortPtr != NULL) { *containerPtr->abortPtr = 1; } containerPtr->abortPtr = &abort; abort = 0; Tcl_Preserve(containerPtr); /* * Call the constraint engine to fill in the row and column offsets. */ SetGridSize(containerPtr); width = ResolveConstraints(containerPtr, COLUMN, 0); height = ResolveConstraints(containerPtr, ROW, 0); width += Tk_InternalBorderLeft(containerPtr->tkwin) + Tk_InternalBorderRight(containerPtr->tkwin); height += Tk_InternalBorderTop(containerPtr->tkwin) + Tk_InternalBorderBottom(containerPtr->tkwin); if (width < Tk_MinReqWidth(containerPtr->tkwin)) { width = Tk_MinReqWidth(containerPtr->tkwin); } if (height < Tk_MinReqHeight(containerPtr->tkwin)) { height = Tk_MinReqHeight(containerPtr->tkwin); } if (((width != Tk_ReqWidth(containerPtr->tkwin)) || (height != Tk_ReqHeight(containerPtr->tkwin))) && !(containerPtr->flags & DONT_PROPAGATE)) { Tk_GeometryRequest(containerPtr->tkwin, width, height); if (width>1 && height>1) { containerPtr->flags |= REQUESTED_RELAYOUT; Tcl_DoWhenIdle(ArrangeGrid, containerPtr); } containerPtr->abortPtr = NULL; Tcl_Release(containerPtr); return; } /* * If the currently requested layout size doesn't match the container's * window size, then adjust the slot offsets according to the weights. If * all of the weights are zero, place the layout according to the anchor * value. */ realWidth = Tk_Width(containerPtr->tkwin) - Tk_InternalBorderLeft(containerPtr->tkwin) - Tk_InternalBorderRight(containerPtr->tkwin); realHeight = Tk_Height(containerPtr->tkwin) - Tk_InternalBorderTop(containerPtr->tkwin) - Tk_InternalBorderBottom(containerPtr->tkwin); usedX = AdjustOffsets(realWidth, MAX(slotPtr->columnEnd, slotPtr->columnMax), slotPtr->columnPtr); usedY = AdjustOffsets(realHeight, MAX(slotPtr->rowEnd, slotPtr->rowMax), slotPtr->rowPtr); TkComputeAnchor(containerPtr->containerDataPtr->anchor, containerPtr->tkwin, 0, 0, usedX, usedY, &slotPtr->startX, &slotPtr->startY); /* * Now adjust the actual size of the content to its cavity by computing the * cavity size, and adjusting the widget according to its stickyness. */ for (contentPtr = containerPtr->contentPtr; contentPtr != NULL && !abort; contentPtr = contentPtr->nextPtr) { int x, y; /* Top left coordinate */ int col = contentPtr->column; int row = contentPtr->row; x = (col>0) ? slotPtr->columnPtr[col-1].offset : 0; y = (row>0) ? slotPtr->rowPtr[row-1].offset : 0; width = slotPtr->columnPtr[contentPtr->numCols+col-1].offset - x; height = slotPtr->rowPtr[contentPtr->numRows+row-1].offset - y; x += slotPtr->startX; y += slotPtr->startY; AdjustForSticky(contentPtr, &x, &y, &width, &height); /* * Now put the window in the proper spot. (This was taken directly * from tkPack.c.) If the content is a child of the container, then do this * here. Otherwise let Tk_MaintainGeometry do the work. */ if (containerPtr->tkwin == Tk_Parent(contentPtr->tkwin)) { if ((width <= 0) || (height <= 0)) { Tk_UnmapWindow(contentPtr->tkwin); } else { if ((x != Tk_X(contentPtr->tkwin)) || (y != Tk_Y(contentPtr->tkwin)) || (width != Tk_Width(contentPtr->tkwin)) || (height != Tk_Height(contentPtr->tkwin))) { Tk_MoveResizeWindow(contentPtr->tkwin, x, y, width, height); } if (abort) { break; } /* * Don't map the content if the container isn't mapped: wait until * the container gets mapped later. */ if (Tk_IsMapped(containerPtr->tkwin)) { Tk_MapWindow(contentPtr->tkwin); } } } else if ((width <= 0) || (height <= 0)) { Tk_UnmaintainGeometry(contentPtr->tkwin, containerPtr->tkwin); Tk_UnmapWindow(contentPtr->tkwin); } else { Tk_MaintainGeometry(contentPtr->tkwin, containerPtr->tkwin, x, y, width, height); } } containerPtr->abortPtr = NULL; Tcl_Release(containerPtr); } /* *---------------------------------------------------------------------- * * ResolveConstraints -- * * Resolve all of the column and row boundaries. Most of the calculations * are identical for rows and columns, so this procedure is called twice, * once for rows, and again for columns. * * Results: * The offset (in pixels) from the left/top edge of this layout is * returned. * * Side effects: * The slot offsets are copied into the SlotInfo structure for the * geometry container. * *---------------------------------------------------------------------- */ static int ResolveConstraints( Gridder *containerPtr, /* The geometry container for this grid. */ int slotType, /* Either ROW or COLUMN. */ int maxOffset) /* The actual maximum size of this layout in * pixels, or 0 (not currently used). */ { SlotInfo *slotPtr; /* Pointer to row/col constraints. */ Gridder *contentPtr; /* List of content windows in this grid. */ int constraintCount; /* Count of rows or columns that have * constraints. */ int slotCount; /* Last occupied row or column. */ int gridCount; /* The larger of slotCount and * constraintCount. */ GridLayout *layoutPtr; /* Temporary layout structure. */ int requiredSize; /* The natural size of the grid (pixels). * This is the minimum size needed to * accommodate all of the content at their * requested sizes. */ int offset; /* The pixel offset of the right edge of the * current slot from the beginning of the * layout. */ int slot; /* The current slot. */ int start; /* The first slot of a contiguous set whose * constraints are not yet fully resolved. */ int end; /* The Last slot of a contiguous set whose * constraints are not yet fully resolved. */ UniformGroup uniformPre[UNIFORM_PREALLOC]; /* Pre-allocated space for uniform groups. */ UniformGroup *uniformGroupPtr; /* Uniform groups data. */ int uniformGroups; /* Number of currently used uniform groups. */ int uniformGroupsAlloced; /* Size of allocated space for uniform * groups. */ int minSize; int prevGrow, accWeight, grow; /* * For typical sized tables, we'll use stack space for the layout data to * avoid the overhead of a malloc and free for every layout. */ GridLayout layoutData[TYPICAL_SIZE + 1]; if (slotType == COLUMN) { constraintCount = containerPtr->containerDataPtr->columnMax; slotCount = containerPtr->containerDataPtr->columnEnd; slotPtr = containerPtr->containerDataPtr->columnPtr; } else { constraintCount = containerPtr->containerDataPtr->rowMax; slotCount = containerPtr->containerDataPtr->rowEnd; slotPtr = containerPtr->containerDataPtr->rowPtr; } /* * Make sure there is enough memory for the layout. */ gridCount = MAX(constraintCount, slotCount); if (gridCount >= TYPICAL_SIZE) { layoutPtr = (GridLayout *)ckalloc(sizeof(GridLayout) * (1+gridCount)); } else { layoutPtr = layoutData; } /* * Allocate an extra layout slot to represent the left/top edge of the 0th * slot to make it easier to calculate slot widths from offsets without * special case code. * * Initialize the "dummy" slot to the left/top of the table. This slot * avoids special casing the first slot. */ layoutPtr->minOffset = 0; layoutPtr->maxOffset = 0; layoutPtr++; /* * Step 1. * Copy the slot constraints into the layout structure, and initialize the * rest of the fields. */ for (slot=0; slot < constraintCount; slot++) { layoutPtr[slot].minSize = slotPtr[slot].minSize; layoutPtr[slot].weight = slotPtr[slot].weight; layoutPtr[slot].uniform = slotPtr[slot].uniform; layoutPtr[slot].pad = slotPtr[slot].pad; layoutPtr[slot].binNextPtr = NULL; } for (; slot 1 by their right edges. This allows * the computation on minimum and maximum possible layout sizes at each * slot boundary, without the need to re-sort the content. */ switch (slotType) { case COLUMN: for (contentPtr = containerPtr->contentPtr; contentPtr != NULL; contentPtr = contentPtr->nextPtr) { int rightEdge = contentPtr->column + contentPtr->numCols - 1; contentPtr->size = Tk_ReqWidth(contentPtr->tkwin) + contentPtr->padX + contentPtr->iPadX + contentPtr->doubleBw; if (contentPtr->numCols > 1) { contentPtr->binNextPtr = layoutPtr[rightEdge].binNextPtr; layoutPtr[rightEdge].binNextPtr = contentPtr; } else if (rightEdge >= 0) { int size = contentPtr->size + layoutPtr[rightEdge].pad; if (size > layoutPtr[rightEdge].minSize) { layoutPtr[rightEdge].minSize = size; } } } break; case ROW: for (contentPtr = containerPtr->contentPtr; contentPtr != NULL; contentPtr = contentPtr->nextPtr) { int rightEdge = contentPtr->row + contentPtr->numRows - 1; contentPtr->size = Tk_ReqHeight(contentPtr->tkwin) + contentPtr->padY + contentPtr->iPadY + contentPtr->doubleBw; if (contentPtr->numRows > 1) { contentPtr->binNextPtr = layoutPtr[rightEdge].binNextPtr; layoutPtr[rightEdge].binNextPtr = contentPtr; } else if (rightEdge >= 0) { int size = contentPtr->size + layoutPtr[rightEdge].pad; if (size > layoutPtr[rightEdge].minSize) { layoutPtr[rightEdge].minSize = size; } } } break; } /* * Step 2b. * Consider demands on uniform sizes. */ uniformGroupPtr = uniformPre; uniformGroupsAlloced = UNIFORM_PREALLOC; uniformGroups = 0; for (slot = 0; slot < gridCount; slot++) { if (layoutPtr[slot].uniform != NULL) { int weight; for (start = 0; start < uniformGroups; start++) { if (uniformGroupPtr[start].group == layoutPtr[slot].uniform) { break; } } if (start >= uniformGroups) { /* * Have not seen that group before, set up data for it. */ if (uniformGroups >= uniformGroupsAlloced) { /* * We need to allocate more space. */ size_t oldSize = uniformGroupsAlloced * sizeof(UniformGroup); size_t newSize = (uniformGroupsAlloced + UNIFORM_PREALLOC) * sizeof(UniformGroup); UniformGroup *newUG = (UniformGroup *)ckalloc(newSize); UniformGroup *oldUG = uniformGroupPtr; memcpy(newUG, oldUG, oldSize); if (oldUG != uniformPre) { ckfree(oldUG); } uniformGroupPtr = newUG; uniformGroupsAlloced += UNIFORM_PREALLOC; } uniformGroups++; uniformGroupPtr[start].group = layoutPtr[slot].uniform; uniformGroupPtr[start].minSize = 0; } weight = layoutPtr[slot].weight; weight = weight > 0 ? weight : 1; minSize = (layoutPtr[slot].minSize + weight - 1) / weight; if (minSize > uniformGroupPtr[start].minSize) { uniformGroupPtr[start].minSize = minSize; } } } /* * Data has been gathered about uniform groups. Now relayout accordingly. */ if (uniformGroups > 0) { for (slot = 0; slot < gridCount; slot++) { if (layoutPtr[slot].uniform != NULL) { for (start = 0; start < uniformGroups; start++) { if (uniformGroupPtr[start].group == layoutPtr[slot].uniform) { int weight = layoutPtr[slot].weight; weight = weight > 0 ? weight : 1; layoutPtr[slot].minSize = uniformGroupPtr[start].minSize * weight; break; } } } } } if (uniformGroupPtr != uniformPre) { ckfree(uniformGroupPtr); } /* * Step 3. * Determine the minimum slot offsets going from left to right that would * fit all of the content. This determines the minimum */ for (offset=0,slot=0; slot < gridCount; slot++) { layoutPtr[slot].minOffset = layoutPtr[slot].minSize + offset; for (contentPtr = layoutPtr[slot].binNextPtr; contentPtr != NULL; contentPtr = contentPtr->binNextPtr) { int span = (slotType == COLUMN) ? contentPtr->numCols : contentPtr->numRows; int required = contentPtr->size + layoutPtr[slot - span].minOffset; if (required > layoutPtr[slot].minOffset) { layoutPtr[slot].minOffset = required; } } offset = layoutPtr[slot].minOffset; } /* * At this point, we know the minimum required size of the entire layout. * It might be prudent to stop here if our "container" will resize itself to * this size. */ requiredSize = offset; if (maxOffset > offset) { offset=maxOffset; } /* * Step 4. * Determine the minimum slot offsets going from right to left, bounding * the pixel range of each slot boundary. Pre-fill all of the right * offsets with the actual size of the table; they will be reduced as * required. */ for (slot=0; slot < gridCount; slot++) { layoutPtr[slot].maxOffset = offset; } for (slot=gridCount-1; slot > 0;) { for (contentPtr = layoutPtr[slot].binNextPtr; contentPtr != NULL; contentPtr = contentPtr->binNextPtr) { int span = (slotType == COLUMN) ? contentPtr->numCols : contentPtr->numRows; int require = offset - contentPtr->size; int startSlot = slot - span; if (startSlot >=0 && require < layoutPtr[startSlot].maxOffset) { layoutPtr[startSlot].maxOffset = require; } } offset -= layoutPtr[slot].minSize; slot--; if (layoutPtr[slot].maxOffset < offset) { offset = layoutPtr[slot].maxOffset; } else { layoutPtr[slot].maxOffset = offset; } } /* * Step 5. * At this point, each slot boundary has a range of values that will * satisfy the overall layout size. Make repeated passes over the layout * structure looking for spans of slot boundaries where the minOffsets are * less than the maxOffsets, and adjust the offsets according to the slot * weights. At each pass, at least one slot boundary will have its range * of possible values fixed at a single value. */ for (start = 0; start < gridCount;) { int totalWeight = 0; /* Sum of the weights for all of the slots in * this span. */ int need = 0; /* The minimum space needed to layout this * span. */ int have; /* The actual amount of space that will be * taken up by this span. */ int weight; /* Cumulative weights of the columns in this * span. */ int noWeights = 0; /* True if the span has no weights. */ /* * Find a span by identifying ranges of slots whose edges are already * constrained at fixed offsets, but whose internal slot boundaries * have a range of possible positions. */ if (layoutPtr[start].minOffset == layoutPtr[start].maxOffset) { start++; continue; } for (end = start + 1; end < gridCount; end++) { if (layoutPtr[end].minOffset == layoutPtr[end].maxOffset) { break; } } /* * We found a span. Compute the total weight, minumum space required, * for this span, and the actual amount of space the span should use. */ for (slot = start; slot <= end; slot++) { totalWeight += layoutPtr[slot].weight; need += layoutPtr[slot].minSize; } have = layoutPtr[end].maxOffset - layoutPtr[start-1].minOffset; /* * If all the weights in the span are zero, then distribute the extra * space evenly. */ if (totalWeight == 0) { noWeights++; totalWeight = end - start + 1; } /* * It might not be possible to give the span all of the space * available on this pass without violating the size constraints of * one or more of the internal slot boundaries. Try to determine the * maximum amount of space that when added to the entire span, would * cause a slot boundary to have its possible range reduced to one * value, and reduce the amount of extra space allocated on this pass * accordingly. * * The calculation is done cumulatively to avoid accumulating roundoff * errors. */ do { int prevMinOffset = layoutPtr[start - 1].minOffset; prevGrow = 0; accWeight = 0; for (slot = start; slot <= end; slot++) { weight = noWeights ? 1 : layoutPtr[slot].weight; accWeight += weight; grow = (have - need) * accWeight / totalWeight - prevGrow; prevGrow += grow; if ((weight > 0) && ((prevMinOffset + layoutPtr[slot].minSize + grow) > layoutPtr[slot].maxOffset)) { int newHave; /* * There is not enough room to grow that much. Calculate * how much this slot can grow and how much "have" that * corresponds to. */ grow = layoutPtr[slot].maxOffset - layoutPtr[slot].minSize - prevMinOffset; newHave = grow * totalWeight / weight; if (newHave > totalWeight) { /* * By distributing multiples of totalWeight we * minimize rounding errors since they will only * happen in the last loop(s). */ newHave = newHave / totalWeight * totalWeight; } if (newHave <= 0) { /* * We can end up with a "have" of 0 here if the * previous slots have taken all the space. In that * case we cannot guess an appropriate "have" so we * just try some lower "have" that is >= 1, to make * sure this terminates. */ newHave = (have - need) - 1; if (newHave > (3 * totalWeight)) { /* * Go down 25% for large values. */ newHave = newHave * 3 / 4; } if (newHave > totalWeight) { /* * Round down to a multiple of totalWeight. */ newHave = newHave / totalWeight * totalWeight; } if (newHave <= 0) { newHave = 1; } } have = newHave + need; /* * Restart loop to check if the new "have" will fit. */ break; } prevMinOffset += layoutPtr[slot].minSize + grow; if (prevMinOffset < layoutPtr[slot].minOffset) { prevMinOffset = layoutPtr[slot].minOffset; } } /* * Quit the outer loop if the inner loop ran all the way. */ } while (slot <= end); /* * Now distribute the extra space among the slots by adjusting the * minSizes and minOffsets. */ prevGrow = 0; accWeight = 0; for (slot = start; slot <= end; slot++) { accWeight += noWeights ? 1 : layoutPtr[slot].weight; grow = (have - need) * accWeight / totalWeight - prevGrow; prevGrow += grow; layoutPtr[slot].minSize += grow; if ((layoutPtr[slot-1].minOffset + layoutPtr[slot].minSize) > layoutPtr[slot].minOffset) { layoutPtr[slot].minOffset = layoutPtr[slot-1].minOffset + layoutPtr[slot].minSize; } } /* * Having pushed the top/left boundaries of the slots to take up extra * space, the bottom/right space is recalculated to propagate the new * space allocation. */ for (slot = end; slot > start; slot--) { /* * maxOffset may not go up. */ if ((layoutPtr[slot].maxOffset-layoutPtr[slot].minSize) < layoutPtr[slot-1].maxOffset) { layoutPtr[slot-1].maxOffset = layoutPtr[slot].maxOffset-layoutPtr[slot].minSize; } } } /* * Step 6. * All of the space has been apportioned; copy the layout information back * into the container. */ for (slot=0; slot < gridCount; slot++) { slotPtr[slot].offset = layoutPtr[slot].minOffset; } --layoutPtr; if (layoutPtr != layoutData) { ckfree(layoutPtr); } return requiredSize; } /* *---------------------------------------------------------------------- * * GetGrid -- * * This internal procedure is used to locate a Grid structure for a given * window, creating one if one doesn't exist already. * * Results: * The return value is a pointer to the Grid structure corresponding to * tkwin. * * Side effects: * A new grid structure may be created. If so, then a callback is set up * to clean things up when the window is deleted. * *---------------------------------------------------------------------- */ static Gridder * GetGrid( Tk_Window tkwin) /* Token for window for which grid structure * is desired. */ { Gridder *gridPtr; Tcl_HashEntry *hPtr; int isNew; TkDisplay *dispPtr = ((TkWindow *) tkwin)->dispPtr; if (!dispPtr->gridInit) { Tcl_InitHashTable(&dispPtr->gridHashTable, TCL_ONE_WORD_KEYS); dispPtr->gridInit = 1; } /* * See if there's already grid for this window. If not, then create a new * one. */ hPtr = Tcl_CreateHashEntry(&dispPtr->gridHashTable, (char*) tkwin, &isNew); if (!isNew) { return (Gridder *)Tcl_GetHashValue(hPtr); } gridPtr = (Gridder *)ckalloc(sizeof(Gridder)); gridPtr->tkwin = tkwin; gridPtr->containerPtr = NULL; gridPtr->containerDataPtr = NULL; gridPtr->nextPtr = NULL; gridPtr->contentPtr = NULL; gridPtr->binNextPtr = NULL; gridPtr->column = -1; gridPtr->row = -1; gridPtr->numCols = 1; gridPtr->numRows = 1; gridPtr->padX = 0; gridPtr->padY = 0; gridPtr->padLeft = 0; gridPtr->padTop = 0; gridPtr->iPadX = 0; gridPtr->iPadY = 0; gridPtr->doubleBw = 2 * Tk_Changes(tkwin)->border_width; gridPtr->abortPtr = NULL; gridPtr->flags = 0; gridPtr->sticky = 0; gridPtr->size = 0; gridPtr->in = NULL; gridPtr->containerDataPtr = NULL; Tcl_SetHashValue(hPtr, gridPtr); Tk_CreateEventHandler(tkwin, StructureNotifyMask, GridStructureProc, gridPtr); return gridPtr; } /* *---------------------------------------------------------------------- * * SetGridSize -- * * This internal procedure sets the size of the grid occupied by content. * * Results: * None * * Side effects: * The width and height arguments are filled in the container data * structure. Additional space is allocated for the constraints to * accommodate the offsets. * *---------------------------------------------------------------------- */ static void SetGridSize( Gridder *containerPtr) /* The geometry container for this grid. */ { Gridder *contentPtr; /* Current content window. */ int maxX = 0, maxY = 0; for (contentPtr = containerPtr->contentPtr; contentPtr != NULL; contentPtr = contentPtr->nextPtr) { maxX = MAX(maxX, contentPtr->numCols + contentPtr->column); maxY = MAX(maxY, contentPtr->numRows + contentPtr->row); } containerPtr->containerDataPtr->columnEnd = maxX; containerPtr->containerDataPtr->rowEnd = maxY; CheckSlotData(containerPtr, maxX, COLUMN, CHECK_SPACE); CheckSlotData(containerPtr, maxY, ROW, CHECK_SPACE); } /* *---------------------------------------------------------------------- * * SetContentColumn -- * * Update column data for a content, checking that MAX_ELEMENT bound * is not passed. * * Results: * TCL_ERROR if out of bounds, TCL_OK otherwise * * Side effects: * Content fields are updated. * *---------------------------------------------------------------------- */ static int SetContentColumn( Tcl_Interp *interp, /* Interp for error message. */ Gridder *contentPtr, /* Content to be updated. */ int column, /* New column or -1 to be unchanged. */ int numCols) /* New columnspan or -1 to be unchanged. */ { int newColumn, newNumCols, lastCol; newColumn = (column >= 0) ? column : contentPtr->column; newNumCols = (numCols >= 1) ? numCols : contentPtr->numCols; lastCol = ((newColumn >= 0) ? newColumn : 0) + newNumCols; if (lastCol >= MAX_ELEMENT) { Tcl_SetObjResult(interp, Tcl_NewStringObj("column out of bounds",-1)); Tcl_SetErrorCode(interp, "TK", "GRID", "BAD_COLUMN", NULL); return TCL_ERROR; } contentPtr->column = newColumn; contentPtr->numCols = newNumCols; return TCL_OK; } /* *---------------------------------------------------------------------- * * SetContentRow -- * * Update row data for a content, checking that MAX_ELEMENT bound * is not passed. * * Results: * TCL_ERROR if out of bounds, TCL_OK otherwise * * Side effects: * Content fields are updated. * *---------------------------------------------------------------------- */ static int SetContentRow( Tcl_Interp *interp, /* Interp for error message. */ Gridder *contentPtr, /* Content to be updated. */ int row, /* New row or -1 to be unchanged. */ int numRows) /* New rowspan or -1 to be unchanged. */ { int newRow, newNumRows, lastRow; newRow = (row >= 0) ? row : contentPtr->row; newNumRows = (numRows >= 1) ? numRows : contentPtr->numRows; lastRow = ((newRow >= 0) ? newRow : 0) + newNumRows; if (lastRow >= MAX_ELEMENT) { Tcl_SetObjResult(interp, Tcl_NewStringObj("row out of bounds", -1)); Tcl_SetErrorCode(interp, "TK", "GRID", "BAD_ROW", NULL); return TCL_ERROR; } contentPtr->row = newRow; contentPtr->numRows = newNumRows; return TCL_OK; } /* *---------------------------------------------------------------------- * * CheckSlotData -- * * This internal procedure is used to manage the storage for row and * column (slot) constraints. * * Results: * TRUE if the index is OK, False otherwise. * * Side effects: * A new container grid structure may be created. If so, then it is * initialized. In addition, additional storage for a row or column * constraints may be allocated, and the constraint maximums are * adjusted. * *---------------------------------------------------------------------- */ static int CheckSlotData( Gridder *containerPtr, /* The geometry container for this grid. */ int slot, /* Which slot to look at. */ int slotType, /* ROW or COLUMN. */ int checkOnly) /* Don't allocate new space if true. */ { int numSlot; /* Number of slots already allocated (Space) */ int end; /* Last used constraint. */ /* * If slot is out of bounds, return immediately. */ if (slot < 0 || slot >= MAX_ELEMENT) { return TCL_ERROR; } if ((checkOnly == CHECK_ONLY) && (containerPtr->containerDataPtr == NULL)) { return TCL_ERROR; } /* * If we need to allocate more space, allocate a little extra to avoid * repeated re-alloc's for large tables. We need enough space to hold all * of the offsets as well. */ InitContainerData(containerPtr); end = (slotType == ROW) ? containerPtr->containerDataPtr->rowMax : containerPtr->containerDataPtr->columnMax; if (checkOnly == CHECK_ONLY) { return ((end < slot) ? TCL_ERROR : TCL_OK); } else { numSlot = (slotType == ROW) ? containerPtr->containerDataPtr->rowSpace : containerPtr->containerDataPtr->columnSpace; if (slot >= numSlot) { int newNumSlot = slot + PREALLOC; size_t oldSize = numSlot * sizeof(SlotInfo); size_t newSize = newNumSlot * sizeof(SlotInfo); SlotInfo *newSI = (SlotInfo *)ckalloc(newSize); SlotInfo *oldSI = (slotType == ROW) ? containerPtr->containerDataPtr->rowPtr : containerPtr->containerDataPtr->columnPtr; memcpy(newSI, oldSI, oldSize); memset(newSI+numSlot, 0, newSize - oldSize); ckfree(oldSI); if (slotType == ROW) { containerPtr->containerDataPtr->rowPtr = newSI; containerPtr->containerDataPtr->rowSpace = newNumSlot; } else { containerPtr->containerDataPtr->columnPtr = newSI; containerPtr->containerDataPtr->columnSpace = newNumSlot; } } if (slot >= end && checkOnly != CHECK_SPACE) { if (slotType == ROW) { containerPtr->containerDataPtr->rowMax = slot+1; } else { containerPtr->containerDataPtr->columnMax = slot+1; } } return TCL_OK; } } /* *---------------------------------------------------------------------- * * InitContainerData -- * * This internal procedure is used to allocate and initialize the data * for a geometry container, if the data doesn't exist already. * * Results: * none * * Side effects: * A new container grid structure may be created. If so, then it is * initialized. * *---------------------------------------------------------------------- */ static void InitContainerData( Gridder *containerPtr) { if (containerPtr->containerDataPtr == NULL) { GridContainer *gridPtr = containerPtr->containerDataPtr = (GridContainer *) ckalloc(sizeof(GridContainer)); size_t size = sizeof(SlotInfo) * TYPICAL_SIZE; gridPtr->columnEnd = 0; gridPtr->columnMax = 0; gridPtr->columnPtr = (SlotInfo *)ckalloc(size); gridPtr->columnSpace = TYPICAL_SIZE; gridPtr->rowEnd = 0; gridPtr->rowMax = 0; gridPtr->rowPtr = (SlotInfo *)ckalloc(size); gridPtr->rowSpace = TYPICAL_SIZE; gridPtr->startX = 0; gridPtr->startY = 0; gridPtr->anchor = GRID_DEFAULT_ANCHOR; memset(gridPtr->columnPtr, 0, size); memset(gridPtr->rowPtr, 0, size); } } /* *---------------------------------------------------------------------- * * Unlink -- * * Remove a grid from its container's list of content. * * Results: * None. * * Side effects: * The container will be scheduled for re-arranging, and the size of the * grid will be adjusted accordingly * *---------------------------------------------------------------------- */ static void Unlink( Gridder *contentPtr) /* Window to unlink. */ { Gridder *containerPtr, *contentPtr2; containerPtr = contentPtr->containerPtr; if (containerPtr == NULL) { return; } if (containerPtr->contentPtr == contentPtr) { containerPtr->contentPtr = contentPtr->nextPtr; } else { for (contentPtr2=containerPtr->contentPtr ; ; contentPtr2=contentPtr2->nextPtr) { if (contentPtr2 == NULL) { Tcl_Panic("Unlink couldn't find previous window"); } if (contentPtr2->nextPtr == contentPtr) { contentPtr2->nextPtr = contentPtr->nextPtr; break; } } } if (!(containerPtr->flags & REQUESTED_RELAYOUT)) { containerPtr->flags |= REQUESTED_RELAYOUT; Tcl_DoWhenIdle(ArrangeGrid, containerPtr); } if (containerPtr->abortPtr != NULL) { *containerPtr->abortPtr = 1; } SetGridSize(contentPtr->containerPtr); contentPtr->containerPtr = NULL; /* * If we have emptied this container from content it means we are no longer * handling it and should mark it as free. */ if ((containerPtr->contentPtr == NULL) && (containerPtr->flags & ALLOCED_CONTAINER)) { TkFreeGeometryContainer(containerPtr->tkwin, "grid"); containerPtr->flags &= ~ALLOCED_CONTAINER; } } /* *---------------------------------------------------------------------- * * DestroyGrid -- * * This procedure is invoked by Tcl_EventuallyFree or Tcl_Release to * clean up the internal structure of a grid at a safe time (when no-one * is using it anymore). Cleaning up the grid involves freeing the main * structure for all windows and the container structure for geometry * managers. * * Results: * None. * * Side effects: * Everything associated with the grid is freed up. * *---------------------------------------------------------------------- */ static void DestroyGrid( char *memPtr) /* Info about window that is now dead. */ { Gridder *gridPtr = (Gridder *)memPtr; if (gridPtr->flags & REQUESTED_RELAYOUT) { Tcl_CancelIdleCall(ArrangeGrid, gridPtr); } if (gridPtr->containerDataPtr != NULL) { if (gridPtr->containerDataPtr->rowPtr != NULL) { ckfree(gridPtr->containerDataPtr -> rowPtr); } if (gridPtr->containerDataPtr->columnPtr != NULL) { ckfree(gridPtr->containerDataPtr -> columnPtr); } ckfree(gridPtr->containerDataPtr); } if (gridPtr->in != NULL) { Tcl_DecrRefCount(gridPtr->in); } ckfree(gridPtr); } /* *---------------------------------------------------------------------- * * GridStructureProc -- * * This procedure is invoked by the Tk event dispatcher in response to * StructureNotify events. * * Results: * None. * * Side effects: * If a window was just deleted, clean up all its grid-related * information. If it was just resized, re-configure its content, if any. * *---------------------------------------------------------------------- */ static void GridStructureProc( ClientData clientData, /* Our information about window referred to by * eventPtr. */ XEvent *eventPtr) /* Describes what just happened. */ { Gridder *gridPtr = (Gridder *)clientData; TkDisplay *dispPtr = ((TkWindow *) gridPtr->tkwin)->dispPtr; if (eventPtr->type == ConfigureNotify) { if ((gridPtr->contentPtr != NULL) && !(gridPtr->flags & REQUESTED_RELAYOUT)) { gridPtr->flags |= REQUESTED_RELAYOUT; Tcl_DoWhenIdle(ArrangeGrid, gridPtr); } if ((gridPtr->containerPtr != NULL) && (gridPtr->doubleBw != 2*Tk_Changes(gridPtr->tkwin)->border_width)) { if (!(gridPtr->containerPtr->flags & REQUESTED_RELAYOUT)) { gridPtr->doubleBw = 2*Tk_Changes(gridPtr->tkwin)->border_width; gridPtr->containerPtr->flags |= REQUESTED_RELAYOUT; Tcl_DoWhenIdle(ArrangeGrid, gridPtr->containerPtr); } } } else if (eventPtr->type == DestroyNotify) { Gridder *contentPtr, *nextPtr; if (gridPtr->containerPtr != NULL) { Unlink(gridPtr); } for (contentPtr = gridPtr->contentPtr; contentPtr != NULL; contentPtr = nextPtr) { Tk_ManageGeometry(contentPtr->tkwin, NULL, NULL); Tk_UnmapWindow(contentPtr->tkwin); contentPtr->containerPtr = NULL; nextPtr = contentPtr->nextPtr; contentPtr->nextPtr = NULL; } Tcl_DeleteHashEntry(Tcl_FindHashEntry(&dispPtr->gridHashTable, (char *)gridPtr->tkwin)); if (gridPtr->flags & REQUESTED_RELAYOUT) { Tcl_CancelIdleCall(ArrangeGrid, gridPtr); } gridPtr->tkwin = NULL; Tcl_EventuallyFree(gridPtr, DestroyGrid); } else if (eventPtr->type == MapNotify) { if ((gridPtr->contentPtr != NULL) && !(gridPtr->flags & REQUESTED_RELAYOUT)) { gridPtr->flags |= REQUESTED_RELAYOUT; Tcl_DoWhenIdle(ArrangeGrid, gridPtr); } } else if (eventPtr->type == UnmapNotify) { Gridder *contentPtr; for (contentPtr = gridPtr->contentPtr; contentPtr != NULL; contentPtr = contentPtr->nextPtr) { Tk_UnmapWindow(contentPtr->tkwin); } } } /* *---------------------------------------------------------------------- * * ConfigureContent -- * * This implements the guts of the "grid configure" command. Given a list * of content and configuration options, it arranges for the grid to * manage the content and sets the specified options. Arguments consist * of windows or window shortcuts followed by "-option value" pairs. * * Results: * TCL_OK is returned if all went well. Otherwise, TCL_ERROR is returned * and the interp's result is set to contain an error message. * * Side effects: * Content windows get taken over by the grid. * *---------------------------------------------------------------------- */ static int ConfigureContent( Tcl_Interp *interp, /* Interpreter for error reporting. */ Tk_Window tkwin, /* Any window in application containing * content. Used to look up content names. */ int objc, /* Number of elements in argv. */ Tcl_Obj *const objv[]) /* Argument objects: contains one or more * window names followed by any number of * "option value" pairs. Caller must make sure * that there is at least one window name. */ { Gridder *containerPtr = NULL; Gridder *contentPtr; Tk_Window other, content, parent, ancestor; TkWindow *container; int i, j, tmp; int numWindows; int width; int defaultRow = -1; int defaultColumn = 0; /* Default column number */ int defaultColumnSpan = 1; /* Default number of columns */ const char *lastWindow; /* Use this window to base current row/col * on */ int numSkip; /* Number of 'x' found */ static const char *const optionStrings[] = { "-column", "-columnspan", "-in", "-ipadx", "-ipady", "-padx", "-pady", "-row", "-rowspan", "-sticky", NULL }; enum options { CONF_COLUMN, CONF_COLUMNSPAN, CONF_IN, CONF_IPADX, CONF_IPADY, CONF_PADX, CONF_PADY, CONF_ROW, CONF_ROWSPAN, CONF_STICKY }; int index; const char *string; char firstChar; int positionGiven; /* * Count the number of windows, or window short-cuts. */ firstChar = 0; for (numWindows=0, i=0; i < objc; i++) { int length; char prevChar = firstChar; string = Tcl_GetStringFromObj(objv[i], &length); firstChar = string[0]; if (firstChar == '.') { /* * Check that windows are valid, and locate the first content's * parent window (default for -in). */ if (TkGetWindowFromObj(interp, tkwin, objv[i], &content) != TCL_OK) { return TCL_ERROR; } if (containerPtr == NULL) { /* * Is there any saved -in from a removed content? * If there is, it becomes default for -in. * If the stored container does not exist, just ignore it. */ contentPtr = GetGrid(content); if (contentPtr->in != NULL) { if (TkGetWindowFromObj(interp, content, contentPtr->in, &parent) == TCL_OK) { containerPtr = GetGrid(parent); InitContainerData(containerPtr); } } } if (containerPtr == NULL) { parent = Tk_Parent(content); if (parent != NULL) { containerPtr = GetGrid(parent); InitContainerData(containerPtr); } } numWindows++; continue; } if (length > 1 && i == 0) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad argument \"%s\": must be name of window", string)); Tcl_SetErrorCode(interp, "TK", "GRID", "BAD_PARAMETER", NULL); return TCL_ERROR; } if (length > 1 && firstChar == '-') { break; } if (length > 1) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "unexpected parameter \"%s\" in configure list:" " should be window name or option", string)); Tcl_SetErrorCode(interp, "TK", "GRID", "BAD_PARAMETER", NULL); return TCL_ERROR; } if ((firstChar == REL_HORIZ) && ((numWindows == 0) || (prevChar == REL_SKIP) || (prevChar == REL_VERT))) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "must specify window before shortcut '-'", -1)); Tcl_SetErrorCode(interp, "TK", "GRID", "SHORTCUT_USAGE", NULL); return TCL_ERROR; } if ((firstChar == REL_VERT) || (firstChar == REL_SKIP) || (firstChar == REL_HORIZ)) { continue; } Tcl_SetObjResult(interp, Tcl_ObjPrintf( "invalid window shortcut, \"%s\" should be '-', 'x', or '^'", string)); Tcl_SetErrorCode(interp, "TK", "GRID", "SHORTCUT_USAGE", NULL); return TCL_ERROR; } numWindows = i; if ((objc - numWindows) & 1) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "extra option or option with no value", -1)); Tcl_SetErrorCode(interp, "TK", "GRID", "BAD_PARAMETER", NULL); return TCL_ERROR; } /* * Go through all options looking for -in and -row, which are needed to be * found first to handle the special case where ^ is used on a row without * windows names, but with an -in option. Since all options are checked * here, we do not need to handle the error case again later. */ for (i = numWindows; i < objc; i += 2) { if (Tcl_GetIndexFromObjStruct(interp, objv[i], optionStrings, sizeof(char *), "option", 0, &index) != TCL_OK) { return TCL_ERROR; } if (index == CONF_IN) { if (TkGetWindowFromObj(interp, tkwin, objv[i+1], &other) != TCL_OK) { return TCL_ERROR; } containerPtr = GetGrid(other); InitContainerData(containerPtr); } else if (index == CONF_ROW) { if (Tcl_GetIntFromObj(interp, objv[i+1], &tmp) != TCL_OK || tmp < 0) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad row value \"%s\": must be a non-negative integer", Tcl_GetString(objv[i+1]))); Tcl_SetErrorCode(interp, "TK", "VALUE", "POSITIVE_INT", NULL); return TCL_ERROR; } defaultRow = tmp; } } /* * If no -row is given, use the next row after the highest occupied row * of the container. */ if (defaultRow < 0) { if (containerPtr != NULL && containerPtr->containerDataPtr != NULL) { SetGridSize(containerPtr); defaultRow = containerPtr->containerDataPtr->rowEnd; } else { defaultRow = 0; } } /* * Iterate over all of the content windows and short-cuts, parsing options * for each content. It's a bit wasteful to re-parse the options for each * content, but things get too messy if we try to parse the arguments just * once at the beginning. For example, if a content already is managed we * want to just change a few existing values without resetting everything. * If there are multiple windows, the -in option only gets processed for * the first window. */ positionGiven = 0; for (j = 0; j < numWindows; j++) { string = Tcl_GetString(objv[j]); firstChar = string[0]; /* * '^' and 'x' cause us to skip a column. '-' is processed as part of * its preceeding content. */ if ((firstChar == REL_VERT) || (firstChar == REL_SKIP)) { defaultColumn++; continue; } if (firstChar == REL_HORIZ) { continue; } for (defaultColumnSpan = 1; j + defaultColumnSpan < numWindows; defaultColumnSpan++) { string = Tcl_GetString(objv[j + defaultColumnSpan]); if (*string != REL_HORIZ) { break; } } if (TkGetWindowFromObj(interp, tkwin, objv[j], &content) != TCL_OK) { return TCL_ERROR; } if (Tk_TopWinHierarchy(content)) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't manage \"%s\": it's a top-level window", Tcl_GetString(objv[j]))); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "TOPLEVEL", NULL); return TCL_ERROR; } contentPtr = GetGrid(content); /* * The following statement is taken from tkPack.c: * * "If the content isn't currently managed, reset all of its * configuration information to default values (there could be old * values left from a previous packer)." * * I [D.S.] disagree with this statement. If a content is disabled * (using "forget") and then re-enabled, I submit that 90% of the time * the programmer will want it to retain its old configuration * information. If the programmer doesn't want this behavior, then the * defaults can be reestablished by hand, without having to worry * about keeping track of the old state. */ for (i = numWindows; i < objc; i += 2) { Tcl_GetIndexFromObjStruct(interp, objv[i], optionStrings, sizeof(char *), "option", 0, &index); switch ((enum options) index) { case CONF_COLUMN: if (Tcl_GetIntFromObj(NULL, objv[i+1], &tmp) != TCL_OK || tmp < 0) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad column value \"%s\": must be a non-negative integer", Tcl_GetString(objv[i+1]))); Tcl_SetErrorCode(interp, "TK", "VALUE", "COLUMN", NULL); return TCL_ERROR; } if (SetContentColumn(interp, contentPtr, tmp, -1) != TCL_OK) { return TCL_ERROR; } break; case CONF_COLUMNSPAN: if (Tcl_GetIntFromObj(NULL, objv[i+1], &tmp) != TCL_OK || tmp <= 0) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad columnspan value \"%s\": must be a positive integer", Tcl_GetString(objv[i+1]))); Tcl_SetErrorCode(interp, "TK", "VALUE", "SPAN", NULL); return TCL_ERROR; } if (SetContentColumn(interp, contentPtr, -1, tmp) != TCL_OK) { return TCL_ERROR; } break; case CONF_IN: if (TkGetWindowFromObj(interp, tkwin, objv[i+1], &other) != TCL_OK) { return TCL_ERROR; } if (other == content) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "window can't be managed in itself", -1)); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "SELF", NULL); return TCL_ERROR; } positionGiven = 1; containerPtr = GetGrid(other); InitContainerData(containerPtr); break; case CONF_STICKY: { int sticky = StringToSticky(Tcl_GetString(objv[i+1])); if (sticky == -1) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad stickyness value \"%s\": must be" " a string containing n, e, s, and/or w", Tcl_GetString(objv[i+1]))); Tcl_SetErrorCode(interp, "TK", "VALUE", "STICKY", NULL); return TCL_ERROR; } contentPtr->sticky = sticky; break; } case CONF_IPADX: if ((Tk_GetPixelsFromObj(NULL, content, objv[i+1], &tmp) != TCL_OK) || (tmp < 0)) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad ipadx value \"%s\": must be positive screen distance", Tcl_GetString(objv[i+1]))); Tcl_SetErrorCode(interp, "TK", "VALUE", "INT_PAD", NULL); return TCL_ERROR; } contentPtr->iPadX = tmp * 2; break; case CONF_IPADY: if ((Tk_GetPixelsFromObj(NULL, content, objv[i+1], &tmp) != TCL_OK) || (tmp < 0)) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad ipady value \"%s\": must be positive screen distance", Tcl_GetString(objv[i+1]))); Tcl_SetErrorCode(interp, "TK", "VALUE", "INT_PAD", NULL); return TCL_ERROR; } contentPtr->iPadY = tmp * 2; break; case CONF_PADX: if (TkParsePadAmount(interp, tkwin, objv[i+1], &contentPtr->padLeft, &contentPtr->padX) != TCL_OK) { return TCL_ERROR; } break; case CONF_PADY: if (TkParsePadAmount(interp, tkwin, objv[i+1], &contentPtr->padTop, &contentPtr->padY) != TCL_OK) { return TCL_ERROR; } break; case CONF_ROW: if (Tcl_GetIntFromObj(NULL, objv[i+1], &tmp) != TCL_OK || tmp < 0) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad row value \"%s\": must be a non-negative integer", Tcl_GetString(objv[i+1]))); Tcl_SetErrorCode(interp, "TK", "VALUE", "COLUMN", NULL); return TCL_ERROR; } if (SetContentRow(interp, contentPtr, tmp, -1) != TCL_OK) { return TCL_ERROR; } break; case CONF_ROWSPAN: if ((Tcl_GetIntFromObj(NULL, objv[i+1], &tmp) != TCL_OK) || tmp <= 0) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad rowspan value \"%s\": must be a positive integer", Tcl_GetString(objv[i+1]))); Tcl_SetErrorCode(interp, "TK", "VALUE", "SPAN", NULL); return TCL_ERROR; } if (SetContentRow(interp, contentPtr, -1, tmp) != TCL_OK) { return TCL_ERROR; } break; } } /* * If no position was specified via -in and the content is already * packed, then leave it in its current location. */ if (!positionGiven && (contentPtr->containerPtr != NULL)) { containerPtr = contentPtr->containerPtr; goto scheduleLayout; } /* * If the same -in window is passed in again, then just leave it in * its current location. */ if (positionGiven && (containerPtr == contentPtr->containerPtr)) { goto scheduleLayout; } /* * Make sure we have a geometry container. We look at: * 1) the -in flag * 2) the parent of the first content. */ parent = Tk_Parent(content); if (containerPtr == NULL) { containerPtr = GetGrid(parent); InitContainerData(containerPtr); } if (contentPtr->containerPtr != NULL && contentPtr->containerPtr != containerPtr) { if (contentPtr->containerPtr->tkwin != Tk_Parent(contentPtr->tkwin)) { Tk_UnmaintainGeometry(contentPtr->tkwin, contentPtr->containerPtr->tkwin); } Unlink(contentPtr); contentPtr->containerPtr = NULL; } if (contentPtr->containerPtr == NULL) { Gridder *tempPtr = containerPtr->contentPtr; contentPtr->containerPtr = containerPtr; containerPtr->contentPtr = contentPtr; contentPtr->nextPtr = tempPtr; } /* * Make sure that the content's parent is either the container or an * ancestor of the container, and that the container and content aren't the * same. */ for (ancestor = containerPtr->tkwin; ; ancestor = Tk_Parent(ancestor)) { if (ancestor == parent) { break; } if (Tk_TopWinHierarchy(ancestor)) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't put %s inside %s", Tcl_GetString(objv[j]), Tk_PathName(containerPtr->tkwin))); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "HIERARCHY", NULL); Unlink(contentPtr); return TCL_ERROR; } } /* * Check for management loops. */ for (container = (TkWindow *)containerPtr->tkwin; container != NULL; container = (TkWindow *)TkGetContainer(container)) { if (container == (TkWindow *)content) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't put %s inside %s, would cause management loop", Tcl_GetString(objv[j]), Tk_PathName(containerPtr->tkwin))); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "LOOP", NULL); Unlink(contentPtr); return TCL_ERROR; } } if (containerPtr->tkwin != Tk_Parent(content)) { ((TkWindow *)content)->maintainerPtr = (TkWindow *)containerPtr->tkwin; } Tk_ManageGeometry(content, &gridMgrType, contentPtr); if (!(containerPtr->flags & DONT_PROPAGATE)) { if (TkSetGeometryContainer(interp, containerPtr->tkwin, "grid") != TCL_OK) { Tk_ManageGeometry(content, NULL, NULL); Unlink(contentPtr); return TCL_ERROR; } containerPtr->flags |= ALLOCED_CONTAINER; } /* * Assign default position information. */ if (contentPtr->column == -1) { if (SetContentColumn(interp, contentPtr, defaultColumn,-1) != TCL_OK){ return TCL_ERROR; } } if (SetContentColumn(interp, contentPtr, -1, contentPtr->numCols + defaultColumnSpan - 1) != TCL_OK) { return TCL_ERROR; } if (contentPtr->row == -1) { if (SetContentRow(interp, contentPtr, defaultRow, -1) != TCL_OK) { return TCL_ERROR; } } defaultColumn += contentPtr->numCols; defaultColumnSpan = 1; /* * Arrange for the container to be re-arranged at the first idle moment. */ scheduleLayout: if (containerPtr->abortPtr != NULL) { *containerPtr->abortPtr = 1; } if (!(containerPtr->flags & REQUESTED_RELAYOUT)) { containerPtr->flags |= REQUESTED_RELAYOUT; Tcl_DoWhenIdle(ArrangeGrid, containerPtr); } } /* * Now look for all the "^"'s. */ lastWindow = NULL; numSkip = 0; for (j = 0; j < numWindows; j++) { struct Gridder *otherPtr; int match; /* Found a match for the ^ */ int lastRow, lastColumn; /* Implied end of table. */ string = Tcl_GetString(objv[j]); firstChar = string[0]; if (firstChar == '.') { lastWindow = string; numSkip = 0; } if (firstChar == REL_SKIP) { numSkip++; } if (firstChar != REL_VERT) { continue; } if (containerPtr == NULL) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "can't use '^', cant find master", -1)); Tcl_SetErrorCode(interp, "TK", "GRID", "SHORTCUT_USAGE", NULL); return TCL_ERROR; } /* * Count the number of consecutive ^'s starting from this position. */ for (width = 1; width + j < numWindows; width++) { string = Tcl_GetString(objv[j+width]); if (*string != REL_VERT) { break; } } /* * Find the implied grid location of the ^ */ if (lastWindow == NULL) { lastRow = defaultRow - 1; lastColumn = 0; } else { other = Tk_NameToWindow(interp, lastWindow, tkwin); otherPtr = GetGrid(other); lastRow = otherPtr->row + otherPtr->numRows - 2; lastColumn = otherPtr->column + otherPtr->numCols; } lastColumn += numSkip; match = 0; for (contentPtr = containerPtr->contentPtr; contentPtr != NULL; contentPtr = contentPtr->nextPtr) { if (contentPtr->column == lastColumn && contentPtr->row + contentPtr->numRows - 1 == lastRow) { if (contentPtr->numCols <= width) { if (SetContentRow(interp, contentPtr, -1, contentPtr->numRows + 1) != TCL_OK) { return TCL_ERROR; } match++; j += contentPtr->numCols - 1; lastWindow = Tk_PathName(contentPtr->tkwin); numSkip = 0; break; } } } if (!match) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "can't find slave to extend with \"^\"", -1)); Tcl_SetErrorCode(interp, "TK", "GRID", "SHORTCUT_USAGE", NULL); return TCL_ERROR; } } if (containerPtr == NULL) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "can't determine master window", -1)); Tcl_SetErrorCode(interp, "TK", "GRID", "SHORTCUT_USAGE", NULL); return TCL_ERROR; } SetGridSize(containerPtr); /* * If we have emptied this container from content it means we are no longer * handling it and should mark it as free. */ if (containerPtr->contentPtr == NULL && containerPtr->flags & ALLOCED_CONTAINER) { TkFreeGeometryContainer(containerPtr->tkwin, "grid"); containerPtr->flags &= ~ALLOCED_CONTAINER; } return TCL_OK; } /* *---------------------------------------------------------------------- * * StickyToObj * * Converts the internal boolean combination of "sticky" bits onto a Tcl * list element containing zero or more of n, s, e, or w. * * Results: * A new object is returned that holds the sticky representation. * * Side effects: * none. * *---------------------------------------------------------------------- */ static Tcl_Obj * StickyToObj( int flags) /* The sticky flags. */ { int count = 0; char buffer[4]; if (flags & STICK_NORTH) { buffer[count++] = 'n'; } if (flags & STICK_EAST) { buffer[count++] = 'e'; } if (flags & STICK_SOUTH) { buffer[count++] = 's'; } if (flags & STICK_WEST) { buffer[count++] = 'w'; } return Tcl_NewStringObj(buffer, count); } /* *---------------------------------------------------------------------- * * StringToSticky -- * * Converts an ascii string representing a widgets stickyness into the * boolean result. * * Results: * The boolean combination of the "sticky" bits is retuned. If an error * occurs, such as an invalid character, -1 is returned instead. * * Side effects: * none * *---------------------------------------------------------------------- */ static int StringToSticky( const char *string) { int sticky = 0; char c; while ((c = *string++) != '\0') { switch (c) { case 'n': case 'N': sticky |= STICK_NORTH; break; case 'e': case 'E': sticky |= STICK_EAST; break; case 's': case 'S': sticky |= STICK_SOUTH; break; case 'w': case 'W': sticky |= STICK_WEST; break; case ' ': case ',': case '\t': case '\r': case '\n': break; default: return -1; } } return sticky; } /* *---------------------------------------------------------------------- * * NewPairObj -- * * Creates a new list object and fills it with two integer objects. * * Results: * The newly created list object is returned. * * Side effects: * None. * *---------------------------------------------------------------------- */ static Tcl_Obj * NewPairObj( int val1, int val2) { Tcl_Obj *ary[2]; ary[0] = Tcl_NewIntObj(val1); ary[1] = Tcl_NewIntObj(val2); return Tcl_NewListObj(2, ary); } /* *---------------------------------------------------------------------- * * NewQuadObj -- * * Creates a new list object and fills it with four integer objects. * * Results: * The newly created list object is returned. * * Side effects: * None. * *---------------------------------------------------------------------- */ static Tcl_Obj * NewQuadObj( int val1, int val2, int val3, int val4) { Tcl_Obj *ary[4]; ary[0] = Tcl_NewIntObj(val1); ary[1] = Tcl_NewIntObj(val2); ary[2] = Tcl_NewIntObj(val3); ary[3] = Tcl_NewIntObj(val4); return Tcl_NewListObj(4, ary); } /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */