/* * tkPack.c -- * * This file contains code to implement the "packer" geometry manager for * Tk. * * Copyright © 1990-1994 The Regents of the University of California. * Copyright © 1994-1997 Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tkInt.h" typedef enum {BOTTOM, LEFT, RIGHT, TOP} Side; static const char *const sideNames[] = { "bottom", "left", "right", "top", NULL }; /* * For each window that the packer cares about (either because the window is * managed by the packer or because the window has content that are managed by * the packer), there is a structure of the following type: */ typedef struct Packer { Tk_Window tkwin; /* Tk token for window. NULL means that the * window has been deleted, but the packet * hasn't had a chance to clean up yet because * the structure is still in use. */ struct Packer *containerPtr; /* Container window within which this window is * packed (NULL means this window isn't * managed by the packer). */ struct Packer *nextPtr; /* Next window packed within same container. List * is priority-ordered: first on list gets * packed first. */ struct Packer *contentPtr; /* First in list of content packed inside this * window (NULL means no packed content). */ Side side; /* Side of container against which this window is * packed. */ Tk_Anchor anchor; /* If frame allocated for window is larger * than window needs, this indicates how where * to position window in frame. */ int padX, padY; /* Total additional pixels to leave around the * window. Some is of this space is on each * side. This is space *outside* the window: * we'll allocate extra space in frame but * won't enlarge window). */ int padLeft, padTop; /* The part of padX or padY to use on the left * or top of the widget, respectively. By * default, this is half of padX or padY. */ int iPadX, iPadY; /* Total extra pixels to allocate inside the * window (half of this amount will appear on * each side). */ int doubleBw; /* Twice the window's last known border width. * If this changes, the window must be * repacked within its container. */ int *abortPtr; /* If non-NULL, it means that there is a * nested call to ArrangePacking already * working on this window. *abortPtr may be * set to 1 to abort that nested call. This * happens, for example, if tkwin or any of * its content is deleted. */ int flags; /* Miscellaneous flags; see below for * definitions. */ } Packer; /* * Flag values for Packer structures: * * REQUESTED_REPACK: 1 means a Tcl_DoWhenIdle request has already * been made to repack all the content of this * window. * FILLX: 1 means if frame allocated for window is wider * than window needs, expand window to fill * frame. 0 means don't make window any larger * than needed. * FILLY: Same as FILLX, except for height. * EXPAND: 1 means this window's frame will absorb any * extra space in the container window. * OLD_STYLE: 1 means this window is being managed with the * old-style packer algorithms (before Tk version * 3.3). The main difference is that padding and * filling are done differently. * DONT_PROPAGATE: 1 means don't set this window's requested * size. 0 means if this window is a container then * Tk will set its requested size to fit the * needs of its content. * ALLOCED_CONTAINER 1 means that Pack has allocated itself as * geometry container for this window. */ #define REQUESTED_REPACK 1 #define FILLX 2 #define FILLY 4 #define EXPAND 8 #define OLD_STYLE 16 #define DONT_PROPAGATE 32 #define ALLOCED_CONTAINER 64 /* * The following structure is the official type record for the packer: */ static void PackReqProc(void *clientData, Tk_Window tkwin); static void PackLostContentProc(void *clientData, Tk_Window tkwin); static const Tk_GeomMgr packerType = { "pack", /* name */ PackReqProc, /* requestProc */ PackLostContentProc, /* lostContentProc */ }; /* * Forward declarations for functions defined later in this file: */ static void ArrangePacking(void *clientData); static int ConfigureContent(Tcl_Interp *interp, Tk_Window tkwin, int objc, Tcl_Obj *const objv[]); static Tcl_FreeProc DestroyPacker; static Packer * GetPacker(Tk_Window tkwin); #ifndef TK_NO_DEPRECATED static int PackAfter(Tcl_Interp *interp, Packer *prevPtr, Packer *containerPtr, int objc,Tcl_Obj *const objv[]); #endif /* !TK_NO_DEPRECATED */ static void PackStructureProc(void *clientData, XEvent *eventPtr); static void Unlink(Packer *packPtr); static int XExpansion(Packer *contentPtr, int cavityWidth); static int YExpansion(Packer *contentPtr, int cavityHeight); /* *------------------------------------------------------------------------ * * TkAppendPadAmount -- * * This function generates a text value that describes one of the -padx, * -pady, -ipadx, or -ipady configuration options. The text value * generated is appended to the given Tcl_Obj. * * Results: * None. * * Side effects: * None. * *------------------------------------------------------------------------ */ void TkAppendPadAmount( Tcl_Obj *bufferObj, /* The interpreter into which the result is * written. */ const char *switchName, /* One of "padx", "pady", "ipadx" or * "ipady" */ int halfSpace, /* The left or top padding amount */ int allSpace) /* The total amount of padding */ { Tcl_Obj *padding[2]; if (halfSpace*2 == allSpace) { Tcl_DictObjPut(NULL, bufferObj, Tcl_NewStringObj(switchName, TCL_INDEX_NONE), Tcl_NewWideIntObj(halfSpace)); } else { padding[0] = Tcl_NewWideIntObj(halfSpace); padding[1] = Tcl_NewWideIntObj(allSpace - halfSpace); Tcl_DictObjPut(NULL, bufferObj, Tcl_NewStringObj(switchName, TCL_INDEX_NONE), Tcl_NewListObj(2, padding)); } } /* *------------------------------------------------------------------------ * * Tk_PackCmd -- * * This function is invoked to process the "pack" Tcl command. See the * user documentation for details on what it does. * * Results: * A standard Tcl result. * * Side effects: * See the user documentation. * *------------------------------------------------------------------------ */ int Tk_PackObjCmd( void *clientData, /* Main window associated with interpreter. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tk_Window tkwin = (Tk_Window)clientData; const char *argv2; static const char *const optionStrings[] = { #ifndef TK_NO_DEPRECATED "after", "append", "before", "unpack", #endif /* !TK_NO_DEPRECATED */ "configure", "content", "forget", "info", "propagate", "slaves", NULL }; static const char *const optionStringsNoDep[] = { "configure", "content", "forget", "info", "propagate", NULL }; enum options { #ifndef TK_NO_DEPRECATED PACK_AFTER, PACK_APPEND, PACK_BEFORE, PACK_UNPACK, #endif /* !TK_NO_DEPRECATED */ PACK_CONFIGURE, PACK_CONTENT, PACK_FORGET, PACK_INFO, PACK_PROPAGATE, PACK_SLAVES }; int index; if (objc >= 2) { const char *string = Tcl_GetString(objv[1]); if (string[0] == '.') { return ConfigureContent(interp, tkwin, objc-1, objv+1); } } if (objc < 3) { Tcl_WrongNumArgs(interp, 1, objv, "option arg ?arg ...?"); return TCL_ERROR; } if (Tcl_GetIndexFromObj(NULL, objv[1], optionStrings, "option", 0, &index) != TCL_OK) { /* * Call it again without the deprecated ones to get a proper error * message. This works well since there can't be any ambiguity between * deprecated and new options. */ Tcl_GetIndexFromObj(interp, objv[1], optionStringsNoDep, "option", 0, &index); return TCL_ERROR; } argv2 = Tcl_GetString(objv[2]); switch ((enum options) index) { #ifndef TK_NO_DEPRECATED case PACK_AFTER: { Packer *prevPtr; Tk_Window tkwin2; if (TkGetWindowFromObj(interp, tkwin, objv[2], &tkwin2) != TCL_OK) { return TCL_ERROR; } prevPtr = GetPacker(tkwin2); if (prevPtr->containerPtr == NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "window \"%s\" isn't packed", argv2)); Tcl_SetErrorCode(interp, "TK", "PACK", "NOT_PACKED", (char *)NULL); return TCL_ERROR; } return PackAfter(interp, prevPtr, prevPtr->containerPtr, objc-3, objv+3); } case PACK_APPEND: { Packer *containerPtr; Packer *prevPtr; Tk_Window tkwin2; if (TkGetWindowFromObj(interp, tkwin, objv[2], &tkwin2) != TCL_OK) { return TCL_ERROR; } containerPtr = GetPacker(tkwin2); prevPtr = containerPtr->contentPtr; if (prevPtr != NULL) { while (prevPtr->nextPtr != NULL) { prevPtr = prevPtr->nextPtr; } } return PackAfter(interp, prevPtr, containerPtr, objc-3, objv+3); } case PACK_BEFORE: { Packer *packPtr, *containerPtr; Packer *prevPtr; Tk_Window tkwin2; if (TkGetWindowFromObj(interp, tkwin, objv[2], &tkwin2) != TCL_OK) { return TCL_ERROR; } packPtr = GetPacker(tkwin2); if (packPtr->containerPtr == NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "window \"%s\" isn't packed", argv2)); Tcl_SetErrorCode(interp, "TK", "PACK", "NOT_PACKED", (char *)NULL); return TCL_ERROR; } containerPtr = packPtr->containerPtr; prevPtr = containerPtr->contentPtr; if (prevPtr == packPtr) { prevPtr = NULL; } else { for ( ; ; prevPtr = prevPtr->nextPtr) { if (prevPtr == NULL) { Tcl_Panic("\"pack before\" couldn't find predecessor"); } if (prevPtr->nextPtr == packPtr) { break; } } } return PackAfter(interp, prevPtr, containerPtr, objc-3, objv+3); } #endif /* !TK_NO_DEPRECATED */ case PACK_CONFIGURE: if (argv2[0] != '.') { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad argument \"%s\": must be name of window", argv2)); Tcl_SetErrorCode(interp, "TK", "VALUE", "WINDOW_PATH", (char *)NULL); return TCL_ERROR; } return ConfigureContent(interp, tkwin, objc-2, objv+2); case PACK_FORGET: { Tk_Window content; Packer *contentPtr; int i; for (i = 2; i < objc; i++) { if (TkGetWindowFromObj(interp, tkwin, objv[i], &content) != TCL_OK) { continue; } contentPtr = GetPacker(content); if ((contentPtr != NULL) && (contentPtr->containerPtr != NULL)) { Tk_ManageGeometry(content, NULL, NULL); if (contentPtr->containerPtr->tkwin != Tk_Parent(contentPtr->tkwin)) { Tk_UnmaintainGeometry(contentPtr->tkwin, contentPtr->containerPtr->tkwin); } Unlink(contentPtr); Tk_UnmapWindow(contentPtr->tkwin); } } break; } case PACK_INFO: { Packer *contentPtr; Tk_Window content; Tcl_Obj *infoObj; if (objc != 3) { Tcl_WrongNumArgs(interp, 2, objv, "window"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &content) != TCL_OK) { return TCL_ERROR; } contentPtr = GetPacker(content); if (contentPtr->containerPtr == NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "window \"%s\" isn't packed", argv2)); Tcl_SetErrorCode(interp, "TK", "PACK", "NOT_PACKED", (char *)NULL); return TCL_ERROR; } infoObj = Tcl_NewObj(); Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-in", TCL_INDEX_NONE), Tk_NewWindowObj(contentPtr->containerPtr->tkwin)); Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-anchor", TCL_INDEX_NONE), Tcl_NewStringObj(Tk_NameOfAnchor(contentPtr->anchor), TCL_INDEX_NONE)); Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-expand", TCL_INDEX_NONE), Tcl_NewBooleanObj(contentPtr->flags & EXPAND)); switch (contentPtr->flags & (FILLX|FILLY)) { case 0: Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-fill", TCL_INDEX_NONE), Tcl_NewStringObj("none", TCL_INDEX_NONE)); break; case FILLX: Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-fill", TCL_INDEX_NONE), Tcl_NewStringObj("x", TCL_INDEX_NONE)); break; case FILLY: Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-fill", TCL_INDEX_NONE), Tcl_NewStringObj("y", TCL_INDEX_NONE)); break; case FILLX|FILLY: Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-fill", TCL_INDEX_NONE), Tcl_NewStringObj("both", TCL_INDEX_NONE)); break; } TkAppendPadAmount(infoObj, "-ipadx", contentPtr->iPadX/2, contentPtr->iPadX); TkAppendPadAmount(infoObj, "-ipady", contentPtr->iPadY/2, contentPtr->iPadY); TkAppendPadAmount(infoObj, "-padx", contentPtr->padLeft,contentPtr->padX); TkAppendPadAmount(infoObj, "-pady", contentPtr->padTop, contentPtr->padY); Tcl_DictObjPut(NULL, infoObj, Tcl_NewStringObj("-side", TCL_INDEX_NONE), Tcl_NewStringObj(sideNames[contentPtr->side], TCL_INDEX_NONE)); Tcl_SetObjResult(interp, infoObj); break; } case PACK_PROPAGATE: { Tk_Window container; Packer *containerPtr; int propagate; if (objc > 4) { Tcl_WrongNumArgs(interp, 2, objv, "window ?boolean?"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &container) != TCL_OK) { return TCL_ERROR; } containerPtr = GetPacker(container); if (objc == 3) { Tcl_SetObjResult(interp, Tcl_NewBooleanObj(!(containerPtr->flags & DONT_PROPAGATE))); return TCL_OK; } if (Tcl_GetBooleanFromObj(interp, objv[3], &propagate) != TCL_OK) { return TCL_ERROR; } if (propagate) { /* * If we have content windows, we need to register as geometry container. */ if (containerPtr->contentPtr != NULL) { if (TkSetGeometryContainer(interp, container, "pack") != TCL_OK) { return TCL_ERROR; } containerPtr->flags |= ALLOCED_CONTAINER; } containerPtr->flags &= ~DONT_PROPAGATE; /* * Repack the container to allow new geometry information to * propagate upwards to the container's container. */ if (containerPtr->abortPtr != NULL) { *containerPtr->abortPtr = 1; } if (!(containerPtr->flags & REQUESTED_REPACK)) { containerPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, containerPtr); } } else { if (containerPtr->flags & ALLOCED_CONTAINER) { TkFreeGeometryContainer(container, "pack"); containerPtr->flags &= ~ALLOCED_CONTAINER; } containerPtr->flags |= DONT_PROPAGATE; } break; } case PACK_SLAVES: case PACK_CONTENT: { Tk_Window container; Packer *containerPtr, *contentPtr; Tcl_Obj *resultObj; if (objc != 3) { Tcl_WrongNumArgs(interp, 2, objv, "window"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &container) != TCL_OK) { return TCL_ERROR; } resultObj = Tcl_NewObj(); containerPtr = GetPacker(container); for (contentPtr = containerPtr->contentPtr; contentPtr != NULL; contentPtr = contentPtr->nextPtr) { Tcl_ListObjAppendElement(NULL, resultObj, Tk_NewWindowObj(contentPtr->tkwin)); } Tcl_SetObjResult(interp, resultObj); break; } #ifndef TK_NO_DEPRECATED case PACK_UNPACK: { Tk_Window tkwin2; Packer *packPtr; if (objc != 3) { Tcl_WrongNumArgs(interp, 2, objv, "window"); return TCL_ERROR; } if (TkGetWindowFromObj(interp, tkwin, objv[2], &tkwin2) != TCL_OK) { return TCL_ERROR; } packPtr = GetPacker(tkwin2); if ((packPtr != NULL) && (packPtr->containerPtr != NULL)) { Tk_ManageGeometry(tkwin2, NULL, NULL); if (packPtr->containerPtr->tkwin != Tk_Parent(packPtr->tkwin)) { Tk_UnmaintainGeometry(packPtr->tkwin, packPtr->containerPtr->tkwin); } Unlink(packPtr); Tk_UnmapWindow(packPtr->tkwin); } break; } #endif /* !TK_NO_DEPRECATED */ } return TCL_OK; } /* *------------------------------------------------------------------------ * * PackReqProc -- * * This function is invoked by Tk_GeometryRequest for windows managed by * the packer. * * Results: * None. * * Side effects: * Arranges for tkwin, and all its managed siblings, to be re-packed at * the next idle point. * *------------------------------------------------------------------------ */ static void PackReqProc( void *clientData, /* Packer's information about window that got * new preferred geometry. */ TCL_UNUSED(Tk_Window)) /* Other Tk-related information about the * window. */ { Packer *packPtr = (Packer *)clientData; packPtr = packPtr->containerPtr; if (!(packPtr->flags & REQUESTED_REPACK)) { packPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, packPtr); } } /* *------------------------------------------------------------------------ * * PackLostContentProc -- * * This function is invoked by Tk whenever some other geometry claims * control over a content window that used to be managed by us. * * Results: * None. * * Side effects: * Forgets all packer-related information about the content. * *------------------------------------------------------------------------ */ static void PackLostContentProc( void *clientData, /* Packer structure for content window that was * stolen away. */ TCL_UNUSED(Tk_Window)) /* Tk's handle for the content window. */ { Packer *contentPtr = (Packer *)clientData; if (contentPtr->containerPtr->tkwin != Tk_Parent(contentPtr->tkwin)) { Tk_UnmaintainGeometry(contentPtr->tkwin, contentPtr->containerPtr->tkwin); } Unlink(contentPtr); Tk_UnmapWindow(contentPtr->tkwin); } /* *------------------------------------------------------------------------ * * ArrangePacking -- * * This function is invoked (using the Tcl_DoWhenIdle mechanism) to * re-layout a set of windows managed by the packer. It is invoked at * idle time so that a series of packer requests can be merged into a * single layout operation. * * Results: * None. * * Side effects: * The packed content of containerPtr may get resized or moved. * *------------------------------------------------------------------------ */ static void ArrangePacking( void *clientData) /* Structure describing container whose content * are to be re-layed out. */ { Packer *containerPtr = (Packer *)clientData; Packer *contentPtr; int cavityX, cavityY, cavityWidth, cavityHeight; /* These variables keep track of the * as-yet-unallocated space remaining in the * middle of the container window. */ int frameX, frameY, frameWidth, frameHeight; /* These variables keep track of the frame * allocated to the current window. */ int x, y, width, height; /* These variables are used to hold the actual * geometry of the current window. */ int abort; /* May get set to non-zero to abort this * repacking operation. */ int borderX, borderY; int borderTop, borderBtm; int borderLeft, borderRight; int maxWidth, maxHeight, tmp; containerPtr->flags &= ~REQUESTED_REPACK; /* * If the container has no content anymore, then leave the container's size as-is. * Otherwise there is no way to "relinquish" control over the container * so another geometry manager can take over. */ if (containerPtr->contentPtr == NULL) { return; } /* * Abort any nested call to ArrangePacking for this window, since we'll do * everything necessary here, and set up so this call can be aborted if * necessary. */ if (containerPtr->abortPtr != NULL) { *containerPtr->abortPtr = 1; } containerPtr->abortPtr = &abort; abort = 0; Tcl_Preserve(containerPtr); /* * Pass #1: scan all the content to figure out the total amount of space * needed. Two separate width and height values are computed: * * width - Holds the sum of the widths (plus padding) of all the * content seen so far that were packed LEFT or RIGHT. * height - Holds the sum of the heights (plus padding) of all the * content seen so far that were packed TOP or BOTTOM. * * maxWidth - Gradually builds up the width needed by the container to * just barely satisfy all the content's needs. For each * content, the code computes the width needed for all the * content so far and updates maxWidth if the new value is * greater. * maxHeight - Same as maxWidth, except keeps height info. */ width = maxWidth = Tk_InternalBorderLeft(containerPtr->tkwin) + Tk_InternalBorderRight(containerPtr->tkwin); height = maxHeight = Tk_InternalBorderTop(containerPtr->tkwin) + Tk_InternalBorderBottom(containerPtr->tkwin); for (contentPtr = containerPtr->contentPtr; contentPtr != NULL; contentPtr = contentPtr->nextPtr) { if ((contentPtr->side == TOP) || (contentPtr->side == BOTTOM)) { tmp = Tk_ReqWidth(contentPtr->tkwin) + contentPtr->doubleBw + contentPtr->padX + contentPtr->iPadX + width; if (tmp > maxWidth) { maxWidth = tmp; } height += Tk_ReqHeight(contentPtr->tkwin) + contentPtr->doubleBw + contentPtr->padY + contentPtr->iPadY; } else { tmp = Tk_ReqHeight(contentPtr->tkwin) + contentPtr->doubleBw + contentPtr->padY + contentPtr->iPadY + height; if (tmp > maxHeight) { maxHeight = tmp; } width += Tk_ReqWidth(contentPtr->tkwin) + contentPtr->doubleBw + contentPtr->padX + contentPtr->iPadX; } } if (width > maxWidth) { maxWidth = width; } if (height > maxHeight) { maxHeight = height; } if (maxWidth < Tk_MinReqWidth(containerPtr->tkwin)) { maxWidth = Tk_MinReqWidth(containerPtr->tkwin); } if (maxHeight < Tk_MinReqHeight(containerPtr->tkwin)) { maxHeight = Tk_MinReqHeight(containerPtr->tkwin); } /* * If the total amount of space needed in the container window has changed, * and if we're propagating geometry information, then notify the next * geometry manager up and requeue ourselves to start again after the * container has had a chance to resize us. */ if (((maxWidth != Tk_ReqWidth(containerPtr->tkwin)) || (maxHeight != Tk_ReqHeight(containerPtr->tkwin))) && !(containerPtr->flags & DONT_PROPAGATE)) { Tk_GeometryRequest(containerPtr->tkwin, maxWidth, maxHeight); containerPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, containerPtr); goto done; } /* * Pass #2: scan the content a second time assigning new sizes. The * "cavity" variables keep track of the unclaimed space in the cavity of * the window; this shrinks inward as we allocate windows around the * edges. The "frame" variables keep track of the space allocated to the * current window and its frame. The current window is then placed * somewhere inside the frame, depending on anchor. */ cavityX = x = Tk_InternalBorderLeft(containerPtr->tkwin); cavityY = y = Tk_InternalBorderTop(containerPtr->tkwin); cavityWidth = Tk_Width(containerPtr->tkwin) - Tk_InternalBorderLeft(containerPtr->tkwin) - Tk_InternalBorderRight(containerPtr->tkwin); cavityHeight = Tk_Height(containerPtr->tkwin) - Tk_InternalBorderTop(containerPtr->tkwin) - Tk_InternalBorderBottom(containerPtr->tkwin); for (contentPtr = containerPtr->contentPtr; contentPtr != NULL; contentPtr = contentPtr->nextPtr) { if ((contentPtr->side == TOP) || (contentPtr->side == BOTTOM)) { frameWidth = cavityWidth; frameHeight = Tk_ReqHeight(contentPtr->tkwin) + contentPtr->doubleBw + contentPtr->padY + contentPtr->iPadY; if (contentPtr->flags & EXPAND) { frameHeight += YExpansion(contentPtr, cavityHeight); } cavityHeight -= frameHeight; if (cavityHeight < 0) { frameHeight += cavityHeight; cavityHeight = 0; } frameX = cavityX; if (contentPtr->side == TOP) { frameY = cavityY; cavityY += frameHeight; } else { frameY = cavityY + cavityHeight; } } else { frameHeight = cavityHeight; frameWidth = Tk_ReqWidth(contentPtr->tkwin) + contentPtr->doubleBw + contentPtr->padX + contentPtr->iPadX; if (contentPtr->flags & EXPAND) { frameWidth += XExpansion(contentPtr, cavityWidth); } cavityWidth -= frameWidth; if (cavityWidth < 0) { frameWidth += cavityWidth; cavityWidth = 0; } frameY = cavityY; if (contentPtr->side == LEFT) { frameX = cavityX; cavityX += frameWidth; } else { frameX = cavityX + cavityWidth; } } /* * Now that we've got the size of the frame for the window, compute * the window's actual size and location using the fill, padding, and * frame factors. The variables "borderX" and "borderY" are used to * handle the differences between old-style packing and the new style * (in old-style, iPadX and iPadY are always zero and padding is * completely ignored except when computing frame size). */ if (contentPtr->flags & OLD_STYLE) { borderX = borderY = 0; borderTop = borderBtm = 0; borderLeft = borderRight = 0; } else { borderX = contentPtr->padX; borderY = contentPtr->padY; borderLeft = contentPtr->padLeft; borderRight = borderX - borderLeft; borderTop = contentPtr->padTop; borderBtm = borderY - borderTop; } width = Tk_ReqWidth(contentPtr->tkwin) + contentPtr->doubleBw + contentPtr->iPadX; if ((contentPtr->flags & FILLX) || (width > (frameWidth - borderX))) { width = frameWidth - borderX; } height = Tk_ReqHeight(contentPtr->tkwin) + contentPtr->doubleBw + contentPtr->iPadY; if ((contentPtr->flags & FILLY) || (height > (frameHeight - borderY))) { height = frameHeight - borderY; } switch (contentPtr->anchor) { case TK_ANCHOR_N: x = frameX + (borderLeft + frameWidth - width - borderRight)/2; y = frameY + borderTop; break; case TK_ANCHOR_NE: x = frameX + frameWidth - width - borderRight; y = frameY + borderTop; break; case TK_ANCHOR_E: x = frameX + frameWidth - width - borderRight; y = frameY + (borderTop + frameHeight - height - borderBtm)/2; break; case TK_ANCHOR_SE: x = frameX + frameWidth - width - borderRight; y = frameY + frameHeight - height - borderBtm; break; case TK_ANCHOR_S: x = frameX + (borderLeft + frameWidth - width - borderRight)/2; y = frameY + frameHeight - height - borderBtm; break; case TK_ANCHOR_SW: x = frameX + borderLeft; y = frameY + frameHeight - height - borderBtm; break; case TK_ANCHOR_W: x = frameX + borderLeft; y = frameY + (borderTop + frameHeight - height - borderBtm)/2; break; case TK_ANCHOR_NW: x = frameX + borderLeft; y = frameY + borderTop; break; default: x = frameX + (borderLeft + frameWidth - width - borderRight)/2; y = frameY + (borderTop + frameHeight - height - borderBtm)/2; break; } width -= contentPtr->doubleBw; height -= contentPtr->doubleBw; /* * The final step is to set the position, size, and mapped/unmapped * state of the content. If the content is a child of the container, then do * this here. Otherwise let Tk_MaintainGeometry do the work. */ if (containerPtr->tkwin == Tk_Parent(contentPtr->tkwin)) { if ((width <= 0) || (height <= 0)) { Tk_UnmapWindow(contentPtr->tkwin); } else { if ((x != Tk_X(contentPtr->tkwin)) || (y != Tk_Y(contentPtr->tkwin)) || (width != Tk_Width(contentPtr->tkwin)) || (height != Tk_Height(contentPtr->tkwin))) { Tk_MoveResizeWindow(contentPtr->tkwin, x, y, width, height); } if (abort) { goto done; } /* * Don't map the content if the container isn't mapped: wait until * the container gets mapped later. */ if (Tk_IsMapped(containerPtr->tkwin)) { Tk_MapWindow(contentPtr->tkwin); } } } else { if ((width <= 0) || (height <= 0)) { Tk_UnmaintainGeometry(contentPtr->tkwin, containerPtr->tkwin); Tk_UnmapWindow(contentPtr->tkwin); } else { Tk_MaintainGeometry(contentPtr->tkwin, containerPtr->tkwin, x, y, width, height); } } /* * Changes to the window's structure could cause almost anything to * happen, including deleting the parent or child. If this happens, * we'll be told to abort. */ if (abort) { goto done; } } done: containerPtr->abortPtr = NULL; Tcl_Release(containerPtr); } /* *---------------------------------------------------------------------- * * XExpansion -- * * Given a list of packed content, the first of which is packed on the * left or right and is expandable, compute how much to expand the child. * * Results: * The return value is the number of additional pixels to give to the * child. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int XExpansion( Packer *contentPtr, /* First in list of remaining content. */ int cavityWidth) /* Horizontal space left for all remaining * content. */ { int numExpand, minExpand, curExpand; int childWidth; /* * This function is tricky because windows packed top or bottom can be * interspersed among expandable windows packed left or right. Scan * through the list, keeping a running sum of the widths of all left and * right windows (actually, count the cavity space not allocated) and a * running count of all expandable left and right windows. At each top or * bottom window, and at the end of the list, compute the expansion factor * that seems reasonable at that point. Return the smallest factor seen at * any of these points. */ minExpand = cavityWidth; numExpand = 0; for ( ; contentPtr != NULL; contentPtr = contentPtr->nextPtr) { childWidth = Tk_ReqWidth(contentPtr->tkwin) + contentPtr->doubleBw + contentPtr->padX + contentPtr->iPadX; if ((contentPtr->side == TOP) || (contentPtr->side == BOTTOM)) { if (numExpand) { curExpand = (cavityWidth - childWidth)/numExpand; if (curExpand < minExpand) { minExpand = curExpand; } } } else { cavityWidth -= childWidth; if (contentPtr->flags & EXPAND) { numExpand++; } } } if (numExpand) { curExpand = cavityWidth/numExpand; if (curExpand < minExpand) { minExpand = curExpand; } } return (minExpand < 0) ? 0 : minExpand; } /* *---------------------------------------------------------------------- * * YExpansion -- * * Given a list of packed content, the first of which is packed on the top * or bottom and is expandable, compute how much to expand the child. * * Results: * The return value is the number of additional pixels to give to the * child. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int YExpansion( Packer *contentPtr, /* First in list of remaining content. */ int cavityHeight) /* Vertical space left for all remaining * content. */ { int numExpand, minExpand, curExpand; int childHeight; /* * See comments for XExpansion. */ minExpand = cavityHeight; numExpand = 0; for ( ; contentPtr != NULL; contentPtr = contentPtr->nextPtr) { childHeight = Tk_ReqHeight(contentPtr->tkwin) + contentPtr->doubleBw + contentPtr->padY + contentPtr->iPadY; if ((contentPtr->side == LEFT) || (contentPtr->side == RIGHT)) { if (numExpand) { curExpand = (cavityHeight - childHeight)/numExpand; if (curExpand < minExpand) { minExpand = curExpand; } } } else { cavityHeight -= childHeight; if (contentPtr->flags & EXPAND) { numExpand++; } } } if (numExpand) { curExpand = cavityHeight/numExpand; if (curExpand < minExpand) { minExpand = curExpand; } } return (minExpand < 0) ? 0 : minExpand; } /* *------------------------------------------------------------------------ * * GetPacker -- * * This internal function is used to locate a Packer structure for a * given window, creating one if one doesn't exist already. * * Results: * The return value is a pointer to the Packer structure corresponding to * tkwin. * * Side effects: * A new packer structure may be created. If so, then a callback is set * up to clean things up when the window is deleted. * *------------------------------------------------------------------------ */ static Packer * GetPacker( Tk_Window tkwin) /* Token for window for which packer structure * is desired. */ { Packer *packPtr; Tcl_HashEntry *hPtr; int isNew; TkDisplay *dispPtr = ((TkWindow *) tkwin)->dispPtr; if (!dispPtr->packInit) { dispPtr->packInit = 1; Tcl_InitHashTable(&dispPtr->packerHashTable, TCL_ONE_WORD_KEYS); } /* * See if there's already packer for this window. If not, then create a * new one. */ hPtr = Tcl_CreateHashEntry(&dispPtr->packerHashTable, (char *) tkwin, &isNew); if (!isNew) { return (Packer *)Tcl_GetHashValue(hPtr); } packPtr = (Packer *)ckalloc(sizeof(Packer)); packPtr->tkwin = tkwin; packPtr->containerPtr = NULL; packPtr->nextPtr = NULL; packPtr->contentPtr = NULL; packPtr->side = TOP; packPtr->anchor = TK_ANCHOR_CENTER; packPtr->padX = packPtr->padY = 0; packPtr->padLeft = packPtr->padTop = 0; packPtr->iPadX = packPtr->iPadY = 0; packPtr->doubleBw = 2*Tk_Changes(tkwin)->border_width; packPtr->abortPtr = NULL; packPtr->flags = 0; Tcl_SetHashValue(hPtr, packPtr); Tk_CreateEventHandler(tkwin, StructureNotifyMask, PackStructureProc, packPtr); return packPtr; } /* *------------------------------------------------------------------------ * * PackAfter -- * * This function does most of the real work of adding one or more windows * into the packing order for its container. * * Results: * A standard Tcl return value. * * Side effects: * The geometry of the specified windows may change, both now and again * in the future. * *------------------------------------------------------------------------ */ #ifndef TK_NO_DEPRECATED static int PackAfter( Tcl_Interp *interp, /* Interpreter for error reporting. */ Packer *prevPtr, /* Pack windows in argv just after this * window; NULL means pack as first child of * containerPtr. */ Packer *containerPtr, /* Container in which to pack windows. */ int objc, /* Number of elements in objv. */ Tcl_Obj *const objv[]) /* Array of lists, each containing 2 elements: * window name and side against which to * pack. */ { Packer *packPtr; Tk_Window tkwin, ancestor, parent; Tcl_Obj **options; int c; Tcl_Size index, optionCount; /* * Iterate over all of the window specifiers, each consisting of two * arguments. The first argument contains the window name and the * additional arguments contain options such as "top" or "padx 20". */ for ( ; objc > 0; objc -= 2, objv += 2, prevPtr = packPtr) { if (objc < 2) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "wrong # args: window \"%s\" should be followed by options", Tcl_GetString(objv[0]))); Tcl_SetErrorCode(interp, "TCL", "WRONGARGS", (char *)NULL); return TCL_ERROR; } /* * Find the packer for the window to be packed, and make sure that the * window in which it will be packed is either its or a descendant of * its parent. */ if (TkGetWindowFromObj(interp, containerPtr->tkwin, objv[0], &tkwin) != TCL_OK) { return TCL_ERROR; } parent = Tk_Parent(tkwin); for (ancestor = containerPtr->tkwin; ; ancestor = Tk_Parent(ancestor)) { if (ancestor == parent) { break; } if (((Tk_FakeWin *) (ancestor))->flags & TK_TOP_HIERARCHY) { badWindow: Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't pack \"%s\" inside \"%s\"", Tcl_GetString(objv[0]), Tk_PathName(containerPtr->tkwin))); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "HIERARCHY", (char *)NULL); return TCL_ERROR; } } if (((Tk_FakeWin *) (tkwin))->flags & TK_TOP_HIERARCHY) { goto badWindow; } if (tkwin == containerPtr->tkwin) { goto badWindow; } packPtr = GetPacker(tkwin); /* * Process options for this window. */ if (Tcl_ListObjGetElements(interp, objv[1], &optionCount, &options) != TCL_OK) { return TCL_ERROR; } packPtr->side = TOP; packPtr->anchor = TK_ANCHOR_CENTER; packPtr->padX = packPtr->padY = 0; packPtr->padLeft = packPtr->padTop = 0; packPtr->iPadX = packPtr->iPadY = 0; packPtr->flags &= ~(FILLX|FILLY|EXPAND); packPtr->flags |= OLD_STYLE; for (index = 0 ; index < optionCount; index++) { Tcl_Obj *curOptPtr = options[index]; Tcl_Size length; const char *curOpt = Tcl_GetStringFromObj(curOptPtr, &length); c = curOpt[0]; if ((c == 't') && (strncmp(curOpt, "top", length)) == 0) { packPtr->side = TOP; } else if ((c == 'b') && (strncmp(curOpt, "bottom", length)) == 0) { packPtr->side = BOTTOM; } else if ((c == 'l') && (strncmp(curOpt, "left", length)) == 0) { packPtr->side = LEFT; } else if ((c == 'r') && (strncmp(curOpt, "right", length)) == 0) { packPtr->side = RIGHT; } else if ((c == 'e') && (strncmp(curOpt, "expand", length)) == 0) { packPtr->flags |= EXPAND; } else if ((c == 'f') && (strcmp(curOpt, "fill")) == 0) { packPtr->flags |= FILLX|FILLY; } else if ((length == 5) && (strcmp(curOpt, "fillx")) == 0) { packPtr->flags |= FILLX; } else if ((length == 5) && (strcmp(curOpt, "filly")) == 0) { packPtr->flags |= FILLY; } else if ((c == 'p') && (strcmp(curOpt, "padx")) == 0) { if (optionCount <= (index+1)) { missingPad: Tcl_SetObjResult(interp, Tcl_ObjPrintf( "wrong # args: \"%s\" option must be" " followed by screen distance", curOpt)); Tcl_SetErrorCode(interp, "TK", "OLDPACK", "BAD_PARAMETER", (char *)NULL); return TCL_ERROR; } if (TkParsePadAmount(interp, tkwin, options[index+1], &packPtr->padLeft, &packPtr->padX) != TCL_OK) { return TCL_ERROR; } packPtr->padX /= 2; packPtr->padLeft /= 2; packPtr->iPadX = 0; index++; } else if ((c == 'p') && (strcmp(curOpt, "pady")) == 0) { if (optionCount <= (index+1)) { goto missingPad; } if (TkParsePadAmount(interp, tkwin, options[index+1], &packPtr->padTop, &packPtr->padY) != TCL_OK) { return TCL_ERROR; } packPtr->padY /= 2; packPtr->padTop /= 2; packPtr->iPadY = 0; index++; } else if ((c == 'f') && (length > 1) && (strncmp(curOpt, "frame", length) == 0)) { if (optionCount <= (index+1)) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "wrong # args: \"frame\"" " option must be followed by anchor point", TCL_INDEX_NONE)); Tcl_SetErrorCode(interp, "TK", "OLDPACK", "BAD_PARAMETER", (char *)NULL); return TCL_ERROR; } if (Tk_GetAnchorFromObj(interp, options[index+1], &packPtr->anchor) != TCL_OK) { return TCL_ERROR; } index++; } else { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad option \"%s\": should be top, bottom, left," " right, expand, fill, fillx, filly, padx, pady, or" " frame", curOpt)); Tcl_SetErrorCode(interp, "TK", "OLDPACK", "BAD_PARAMETER", (char *)NULL); return TCL_ERROR; } } if (packPtr != prevPtr) { /* * Unpack this window if it's currently packed. */ if (packPtr->containerPtr != NULL) { if ((packPtr->containerPtr != containerPtr) && (packPtr->containerPtr->tkwin != Tk_Parent(packPtr->tkwin))) { Tk_UnmaintainGeometry(packPtr->tkwin, packPtr->containerPtr->tkwin); } Unlink(packPtr); } /* * Add the window in the correct place in its container's packing * order, then make sure that the window is managed by us. */ packPtr->containerPtr = containerPtr; if (prevPtr == NULL) { packPtr->nextPtr = containerPtr->contentPtr; containerPtr->contentPtr = packPtr; } else { packPtr->nextPtr = prevPtr->nextPtr; prevPtr->nextPtr = packPtr; } Tk_ManageGeometry(tkwin, &packerType, packPtr); if (!(containerPtr->flags & DONT_PROPAGATE)) { if (TkSetGeometryContainer(interp, containerPtr->tkwin, "pack") != TCL_OK) { Tk_ManageGeometry(tkwin, NULL, NULL); Unlink(packPtr); return TCL_ERROR; } containerPtr->flags |= ALLOCED_CONTAINER; } } } /* * Arrange for the container to be re-packed at the first idle moment. */ if (containerPtr->abortPtr != NULL) { *containerPtr->abortPtr = 1; } if (!(containerPtr->flags & REQUESTED_REPACK)) { containerPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, containerPtr); } return TCL_OK; } #endif /* !TK_NO_DEPRECATED */ /* *---------------------------------------------------------------------- * * Unlink -- * * Remove a packer from its container's list of content. * * Results: * None. * * Side effects: * The container will be scheduled for repacking. * *---------------------------------------------------------------------- */ static void Unlink( Packer *packPtr) /* Window to unlink. */ { Packer *containerPtr, *packPtr2; containerPtr = packPtr->containerPtr; if (containerPtr == NULL) { return; } if (containerPtr->contentPtr == packPtr) { containerPtr->contentPtr = packPtr->nextPtr; } else { for (packPtr2 = containerPtr->contentPtr; ; packPtr2 = packPtr2->nextPtr) { if (packPtr2 == NULL) { Tcl_Panic("Unlink couldn't find previous window"); } if (packPtr2->nextPtr == packPtr) { packPtr2->nextPtr = packPtr->nextPtr; break; } } } if (!(containerPtr->flags & REQUESTED_REPACK)) { containerPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, containerPtr); } if (containerPtr->abortPtr != NULL) { *containerPtr->abortPtr = 1; } packPtr->containerPtr = NULL; /* * If we have emptied this container from content it means we are no longer * handling it and should mark it as free. * * Send the event "NoManagedChild" to the container to inform it about there * being no managed children inside it. */ if ((containerPtr->contentPtr == NULL) && (containerPtr->flags & ALLOCED_CONTAINER)) { TkFreeGeometryContainer(containerPtr->tkwin, "pack"); containerPtr->flags &= ~ALLOCED_CONTAINER; Tk_SendVirtualEvent(containerPtr->tkwin, "NoManagedChild", NULL); } } /* *---------------------------------------------------------------------- * * DestroyPacker -- * * This function is invoked by Tcl_EventuallyFree or Tcl_Release to clean * up the internal structure of a packer at a safe time (when no-one is * using it anymore). * * Results: * None. * * Side effects: * Everything associated with the packer is freed up. * *---------------------------------------------------------------------- */ static void DestroyPacker( #if TCL_MAJOR_VERSION > 8 void *memPtr) /* Info about packed window that is now dead. */ #else char *memPtr) #endif { Packer *packPtr = (Packer *)memPtr; if (packPtr->flags & REQUESTED_REPACK) { Tcl_CancelIdleCall(ArrangePacking, packPtr); } ckfree(packPtr); } /* *---------------------------------------------------------------------- * * PackStructureProc -- * * This function is invoked by the Tk event dispatcher in response to * StructureNotify events. * * Results: * None. * * Side effects: * If a window was just deleted, clean up all its packer-related * information. If it was just resized, repack its content, if any. * *---------------------------------------------------------------------- */ static void PackStructureProc( void *clientData, /* Our information about window referred to by * eventPtr. */ XEvent *eventPtr) /* Describes what just happened. */ { Packer *packPtr = (Packer *)clientData; if (eventPtr->type == ConfigureNotify) { if ((packPtr->contentPtr != NULL) && !(packPtr->flags & REQUESTED_REPACK)) { packPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, packPtr); } if ((packPtr->containerPtr != NULL) && (packPtr->doubleBw != 2*Tk_Changes(packPtr->tkwin)->border_width)) { if (!(packPtr->containerPtr->flags & REQUESTED_REPACK)) { packPtr->doubleBw = 2*Tk_Changes(packPtr->tkwin)->border_width; packPtr->containerPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, packPtr->containerPtr); } } } else if (eventPtr->type == DestroyNotify) { Packer *contentPtr, *nextPtr; if (packPtr->containerPtr != NULL) { Unlink(packPtr); } for (contentPtr = packPtr->contentPtr; contentPtr != NULL; contentPtr = nextPtr) { Tk_ManageGeometry(contentPtr->tkwin, NULL, NULL); Tk_UnmapWindow(contentPtr->tkwin); contentPtr->containerPtr = NULL; nextPtr = contentPtr->nextPtr; contentPtr->nextPtr = NULL; } if (packPtr->tkwin != NULL) { TkDisplay *dispPtr = ((TkWindow *) packPtr->tkwin)->dispPtr; Tcl_DeleteHashEntry(Tcl_FindHashEntry(&dispPtr->packerHashTable, packPtr->tkwin)); } if (packPtr->flags & REQUESTED_REPACK) { Tcl_CancelIdleCall(ArrangePacking, packPtr); } packPtr->tkwin = NULL; Tcl_EventuallyFree(packPtr, DestroyPacker); } else if (eventPtr->type == MapNotify) { /* * When a container gets mapped, must redo the geometry computation so * that all of its content get remapped. */ if ((packPtr->contentPtr != NULL) && !(packPtr->flags & REQUESTED_REPACK)) { packPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, packPtr); } } else if (eventPtr->type == UnmapNotify) { Packer *packPtr2; /* * Unmap all of the content when the container gets unmapped, so that they * don't bother to keep redisplaying themselves. */ for (packPtr2 = packPtr->contentPtr; packPtr2 != NULL; packPtr2 = packPtr2->nextPtr) { Tk_UnmapWindow(packPtr2->tkwin); } } } /* *---------------------------------------------------------------------- * * ConfigureContent -- * * This implements the guts of the "pack configure" command. Given a list * of content and configuration options, it arranges for the packer to * manage the content and sets the specified options. * * Results: * TCL_OK is returned if all went well. Otherwise, TCL_ERROR is returned * and the interp's result is set to contain an error message. * * Side effects: * Content windows get taken over by the packer. * *---------------------------------------------------------------------- */ static int ConfigureContent( Tcl_Interp *interp, /* Interpreter for error reporting. */ Tk_Window tkwin, /* Any window in application containing * content. Used to look up content names. */ int objc, /* Number of elements in argv. */ Tcl_Obj *const objv[]) /* Argument objects: contains one or more * window names followed by any number of * "option value" pairs. Caller must make sure * that there is at least one window name. */ { Packer *containerPtr, *contentPtr, *prevPtr, *otherPtr; Tk_Window other, content, parent, ancestor; TkWindow *container; int i, j, numWindows, tmp, positionGiven; const char *string; static const char *const optionStrings[] = { "-after", "-anchor", "-before", "-expand", "-fill", "-in", "-ipadx", "-ipady", "-padx", "-pady", "-side", NULL }; enum options { CONF_AFTER, CONF_ANCHOR, CONF_BEFORE, CONF_EXPAND, CONF_FILL, CONF_IN, CONF_IPADX, CONF_IPADY, CONF_PADX, CONF_PADY, CONF_SIDE }; int index, side; /* * Find out how many windows are specified. */ for (numWindows = 0; numWindows < objc; numWindows++) { string = Tcl_GetString(objv[numWindows]); if (string[0] != '.') { break; } } /* * Iterate over all of the content windows, parsing the configuration * options for each content. It's a bit wasteful to re-parse the options for * each content, but things get too messy if we try to parse the arguments * just once at the beginning. For example, if a content already is packed * we want to just change a few existing values without resetting * everything. If there are multiple windows, the -after, -before, and -in * options only get processed for the first window. */ containerPtr = NULL; prevPtr = NULL; positionGiven = 0; for (j = 0; j < numWindows; j++) { if (TkGetWindowFromObj(interp, tkwin, objv[j], &content) != TCL_OK) { return TCL_ERROR; } if (Tk_TopWinHierarchy(content)) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't pack \"%s\": it's a top-level window", Tcl_GetString(objv[j]))); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "TOPLEVEL", (char *)NULL); return TCL_ERROR; } contentPtr = GetPacker(content); contentPtr->flags &= ~OLD_STYLE; /* * If the content isn't currently packed, reset all of its configuration * information to default values (there could be old values left from * a previous packing). */ if (contentPtr->containerPtr == NULL) { contentPtr->side = TOP; contentPtr->anchor = TK_ANCHOR_CENTER; contentPtr->padX = contentPtr->padY = 0; contentPtr->padLeft = contentPtr->padTop = 0; contentPtr->iPadX = contentPtr->iPadY = 0; contentPtr->flags &= ~(FILLX|FILLY|EXPAND); } for (i = numWindows; i < objc; i+=2) { if ((i+2) > objc) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "extra option \"%s\" (option with no value?)", Tcl_GetString(objv[i]))); Tcl_SetErrorCode(interp, "TK", "PACK", "BAD_PARAMETER", (char *)NULL); return TCL_ERROR; } if (Tcl_GetIndexFromObj(interp, objv[i], optionStrings, "option", 0, &index) != TCL_OK) { return TCL_ERROR; } switch ((enum options) index) { case CONF_AFTER: if (j == 0) { if (TkGetWindowFromObj(interp, tkwin, objv[i+1], &other) != TCL_OK) { return TCL_ERROR; } prevPtr = GetPacker(other); if (prevPtr->containerPtr == NULL) { notPacked: Tcl_SetObjResult(interp, Tcl_ObjPrintf( "window \"%s\" isn't packed", Tcl_GetString(objv[i+1]))); Tcl_SetErrorCode(interp, "TK", "PACK", "NOT_PACKED", (char *)NULL); return TCL_ERROR; } containerPtr = prevPtr->containerPtr; positionGiven = 1; } break; case CONF_ANCHOR: if (Tk_GetAnchorFromObj(interp, objv[i+1], &contentPtr->anchor) != TCL_OK) { return TCL_ERROR; } break; case CONF_BEFORE: if (j == 0) { if (TkGetWindowFromObj(interp, tkwin, objv[i+1], &other) != TCL_OK) { return TCL_ERROR; } otherPtr = GetPacker(other); if (otherPtr->containerPtr == NULL) { goto notPacked; } containerPtr = otherPtr->containerPtr; prevPtr = containerPtr->contentPtr; if (prevPtr == otherPtr) { prevPtr = NULL; } else { while (prevPtr->nextPtr != otherPtr) { prevPtr = prevPtr->nextPtr; } } positionGiven = 1; } break; case CONF_EXPAND: if (Tcl_GetBooleanFromObj(interp, objv[i+1], &tmp) != TCL_OK) { return TCL_ERROR; } contentPtr->flags &= ~EXPAND; if (tmp) { contentPtr->flags |= EXPAND; } break; case CONF_FILL: string = Tcl_GetString(objv[i+1]); if (strcmp(string, "none") == 0) { contentPtr->flags &= ~(FILLX|FILLY); } else if (strcmp(string, "x") == 0) { contentPtr->flags = (contentPtr->flags & ~FILLY) | FILLX; } else if (strcmp(string, "y") == 0) { contentPtr->flags = (contentPtr->flags & ~FILLX) | FILLY; } else if (strcmp(string, "both") == 0) { contentPtr->flags |= FILLX|FILLY; } else { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad fill style \"%s\": must be " "none, x, y, or both", string)); Tcl_SetErrorCode(interp, "TK", "VALUE", "FILL", (char *)NULL); return TCL_ERROR; } break; case CONF_IN: if (j == 0) { if (TkGetWindowFromObj(interp, tkwin, objv[i+1], &other) != TCL_OK) { return TCL_ERROR; } containerPtr = GetPacker(other); prevPtr = containerPtr->contentPtr; if (prevPtr != NULL) { while (prevPtr->nextPtr != NULL) { prevPtr = prevPtr->nextPtr; } } positionGiven = 1; } break; case CONF_IPADX: if ((Tk_GetPixelsFromObj(interp, content, objv[i+1], &tmp) != TCL_OK) || (tmp < 0)) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad ipadx value \"%s\": must be positive screen" " distance", Tcl_GetString(objv[i+1]))); Tcl_SetErrorCode(interp, "TK", "VALUE", "INT_PAD", (char *)NULL); return TCL_ERROR; } contentPtr->iPadX = tmp * 2; break; case CONF_IPADY: if ((Tk_GetPixelsFromObj(interp, content, objv[i+1], &tmp) != TCL_OK) || (tmp < 0)) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad ipady value \"%s\": must be positive screen" " distance", Tcl_GetString(objv[i+1]))); Tcl_SetErrorCode(interp, "TK", "VALUE", "INT_PAD", (char *)NULL); return TCL_ERROR; } contentPtr->iPadY = tmp * 2; break; case CONF_PADX: if (TkParsePadAmount(interp, content, objv[i+1], &contentPtr->padLeft, &contentPtr->padX) != TCL_OK) { return TCL_ERROR; } break; case CONF_PADY: if (TkParsePadAmount(interp, content, objv[i+1], &contentPtr->padTop, &contentPtr->padY) != TCL_OK) { return TCL_ERROR; } break; case CONF_SIDE: if (Tcl_GetIndexFromObj(interp, objv[i+1], sideNames, "side", TCL_EXACT, &side) != TCL_OK) { return TCL_ERROR; } contentPtr->side = (Side) side; break; } } /* * If no position in a packing list was specified and the content is * already packed, then leave it in its current location in its * current packing list. */ if (!positionGiven && (contentPtr->containerPtr != NULL)) { containerPtr = contentPtr->containerPtr; goto scheduleLayout; } /* * If the content is going to be put back after itself or the same -in * window is passed in again, then just skip the whole operation, * since it won't work anyway. */ if (prevPtr == contentPtr) { containerPtr = contentPtr->containerPtr; goto scheduleLayout; } /* * If none of the "-in", "-before", or "-after" options has been * specified, arrange for the content to go at the end of the order for * its parent. */ if (!positionGiven) { containerPtr = GetPacker(Tk_Parent(content)); prevPtr = containerPtr->contentPtr; if (prevPtr != NULL) { while (prevPtr->nextPtr != NULL) { prevPtr = prevPtr->nextPtr; } } } /* * Make sure that the content's parent is either the container or an * ancestor of the container, and that the container and content aren't the * same. */ parent = Tk_Parent(content); for (ancestor = containerPtr->tkwin; ; ancestor = Tk_Parent(ancestor)) { if (ancestor == parent) { break; } if (Tk_TopWinHierarchy(ancestor)) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't pack \"%s\" inside \"%s\"", Tcl_GetString(objv[j]), Tk_PathName(containerPtr->tkwin))); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "HIERARCHY", (char *)NULL); return TCL_ERROR; } } if (content == containerPtr->tkwin) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't pack \"%s\" inside itself", Tcl_GetString(objv[j]))); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "SELF", (char *)NULL); return TCL_ERROR; } /* * Check for management loops. */ for (container = (TkWindow *)containerPtr->tkwin; container != NULL; container = (TkWindow *)TkGetContainer(container)) { if (container == (TkWindow *)content) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't put \"%s\" inside \"%s\": would cause management loop", Tcl_GetString(objv[j]), Tk_PathName(containerPtr->tkwin))); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "LOOP", (char *)NULL); return TCL_ERROR; } } if (containerPtr->tkwin != Tk_Parent(content)) { ((TkWindow *)content)->maintainerPtr = (TkWindow *)containerPtr->tkwin; } /* * Unpack the content if it's currently packed, then position it after * prevPtr. */ if (contentPtr->containerPtr != NULL) { if ((contentPtr->containerPtr != containerPtr) && (contentPtr->containerPtr->tkwin != Tk_Parent(contentPtr->tkwin))) { Tk_UnmaintainGeometry(contentPtr->tkwin, contentPtr->containerPtr->tkwin); } Unlink(contentPtr); } contentPtr->containerPtr = containerPtr; if (prevPtr == NULL) { contentPtr->nextPtr = containerPtr->contentPtr; containerPtr->contentPtr = contentPtr; } else { contentPtr->nextPtr = prevPtr->nextPtr; prevPtr->nextPtr = contentPtr; } Tk_ManageGeometry(content, &packerType, contentPtr); prevPtr = contentPtr; if (!(containerPtr->flags & DONT_PROPAGATE)) { if (TkSetGeometryContainer(interp, containerPtr->tkwin, "pack") != TCL_OK) { Tk_ManageGeometry(content, NULL, NULL); Unlink(contentPtr); return TCL_ERROR; } containerPtr->flags |= ALLOCED_CONTAINER; } /* * Arrange for the container to be re-packed at the first idle moment. */ scheduleLayout: if (containerPtr->abortPtr != NULL) { *containerPtr->abortPtr = 1; } if (!(containerPtr->flags & REQUESTED_REPACK)) { containerPtr->flags |= REQUESTED_REPACK; Tcl_DoWhenIdle(ArrangePacking, containerPtr); } } return TCL_OK; } /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */