/* * tkPlace.c -- * * This file contains code to implement a simple geometry manager for Tk * based on absolute placement or "rubber-sheet" placement. * * Copyright (c) 1992-1994 The Regents of the University of California. * Copyright (c) 1994-1997 Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tkInt.h" /* * Border modes for relative placement: * * BM_INSIDE: relative distances computed using area inside all * borders of master window. * BM_OUTSIDE: relative distances computed using outside area that * includes all borders of master. * BM_IGNORE: border issues are ignored: place relative to master's * actual window size. */ static const char *const borderModeStrings[] = { "inside", "outside", "ignore", NULL }; typedef enum {BM_INSIDE, BM_OUTSIDE, BM_IGNORE} BorderMode; /* * For each window whose geometry is managed by the placer there is a * structure of the following type: */ typedef struct Slave { Tk_Window tkwin; /* Tk's token for window. */ Tk_Window inTkwin; /* Token for the -in window. */ struct Master *masterPtr; /* Pointer to information for window relative * to which tkwin is placed. This isn't * necessarily the logical parent of tkwin. * NULL means the master was deleted or never * assigned. */ struct Slave *nextPtr; /* Next in list of windows placed relative to * same master (NULL for end of list). */ Tk_OptionTable optionTable; /* Table that defines configuration options * available for this command. */ /* * Geometry information for window; where there are both relative and * absolute values for the same attribute (e.g. x and relX) only one of * them is actually used, depending on flags. */ int x, y; /* X and Y pixel coordinates for tkwin. */ Tcl_Obj *xPtr, *yPtr; /* Tcl_Obj rep's of x, y coords, to keep pixel * spec. information. */ double relX, relY; /* X and Y coordinates relative to size of * master. */ int width, height; /* Absolute dimensions for tkwin. */ Tcl_Obj *widthPtr; /* Tcl_Obj rep of width, to keep pixel * spec. */ Tcl_Obj *heightPtr; /* Tcl_Obj rep of height, to keep pixel * spec. */ double relWidth, relHeight; /* Dimensions for tkwin relative to size of * master. */ Tcl_Obj *relWidthPtr; Tcl_Obj *relHeightPtr; Tk_Anchor anchor; /* Which point on tkwin is placed at the given * position. */ BorderMode borderMode; /* How to treat borders of master window. */ int flags; /* Various flags; see below for bit * definitions. */ } Slave; /* * Type masks for options: */ #define IN_MASK 1 static const Tk_OptionSpec optionSpecs[] = { {TK_OPTION_ANCHOR, "-anchor", NULL, NULL, "nw", -1, Tk_Offset(Slave, anchor), 0, 0, 0}, {TK_OPTION_STRING_TABLE, "-bordermode", NULL, NULL, "inside", -1, Tk_Offset(Slave, borderMode), 0, borderModeStrings, 0}, {TK_OPTION_PIXELS, "-height", NULL, NULL, "", Tk_Offset(Slave, heightPtr), Tk_Offset(Slave, height), TK_OPTION_NULL_OK, 0, 0}, {TK_OPTION_WINDOW, "-in", NULL, NULL, "", -1, Tk_Offset(Slave, inTkwin), 0, 0, IN_MASK}, {TK_OPTION_DOUBLE, "-relheight", NULL, NULL, "", Tk_Offset(Slave, relHeightPtr), Tk_Offset(Slave, relHeight), TK_OPTION_NULL_OK, 0, 0}, {TK_OPTION_DOUBLE, "-relwidth", NULL, NULL, "", Tk_Offset(Slave, relWidthPtr), Tk_Offset(Slave, relWidth), TK_OPTION_NULL_OK, 0, 0}, {TK_OPTION_DOUBLE, "-relx", NULL, NULL, "0", -1, Tk_Offset(Slave, relX), 0, 0, 0}, {TK_OPTION_DOUBLE, "-rely", NULL, NULL, "0", -1, Tk_Offset(Slave, relY), 0, 0, 0}, {TK_OPTION_PIXELS, "-width", NULL, NULL, "", Tk_Offset(Slave, widthPtr), Tk_Offset(Slave, width), TK_OPTION_NULL_OK, 0, 0}, {TK_OPTION_PIXELS, "-x", NULL, NULL, "0", Tk_Offset(Slave, xPtr), Tk_Offset(Slave, x), TK_OPTION_NULL_OK, 0, 0}, {TK_OPTION_PIXELS, "-y", NULL, NULL, "0", Tk_Offset(Slave, yPtr), Tk_Offset(Slave, y), TK_OPTION_NULL_OK, 0, 0}, {TK_OPTION_END, NULL, NULL, NULL, NULL, 0, -1, 0, 0, 0} }; /* * Flag definitions for Slave structures: * * CHILD_WIDTH - 1 means -width was specified; * CHILD_REL_WIDTH - 1 means -relwidth was specified. * CHILD_HEIGHT - 1 means -height was specified; * CHILD_REL_HEIGHT - 1 means -relheight was specified. */ #define CHILD_WIDTH 1 #define CHILD_REL_WIDTH 2 #define CHILD_HEIGHT 4 #define CHILD_REL_HEIGHT 8 /* * For each master window that has a slave managed by the placer there is a * structure of the following form: */ typedef struct Master { Tk_Window tkwin; /* Tk's token for master window. */ struct Slave *slavePtr; /* First in linked list of slaves placed * relative to this master. */ int *abortPtr; /* If non-NULL, it means that there is a nested * call to RecomputePlacement already working on * this window. *abortPtr may be set to 1 to * abort that nested call. This happens, for * example, if tkwin or any of its slaves * is deleted. */ int flags; /* See below for bit definitions. */ } Master; /* * Flag definitions for masters: * * PARENT_RECONFIG_PENDING - 1 means that a call to RecomputePlacement is * already pending via a Do_When_Idle handler. */ #define PARENT_RECONFIG_PENDING 1 /* * The following structure is the official type record for the placer: */ static void PlaceRequestProc(ClientData clientData, Tk_Window tkwin); static void PlaceLostSlaveProc(ClientData clientData, Tk_Window tkwin); static const Tk_GeomMgr placerType = { "place", /* name */ PlaceRequestProc, /* requestProc */ PlaceLostSlaveProc, /* lostSlaveProc */ }; /* * Forward declarations for functions defined later in this file: */ static void SlaveStructureProc(ClientData clientData, XEvent *eventPtr); static int ConfigureSlave(Tcl_Interp *interp, Tk_Window tkwin, Tk_OptionTable table, int objc, Tcl_Obj *const objv[]); static int PlaceInfoCommand(Tcl_Interp *interp, Tk_Window tkwin); static Slave * CreateSlave(Tk_Window tkwin, Tk_OptionTable table); static void FreeSlave(Slave *slavePtr); static Slave * FindSlave(Tk_Window tkwin); static Master * CreateMaster(Tk_Window tkwin); static Master * FindMaster(Tk_Window tkwin); static void MasterStructureProc(ClientData clientData, XEvent *eventPtr); static void RecomputePlacement(ClientData clientData); static void UnlinkSlave(Slave *slavePtr); /* *-------------------------------------------------------------- * * Tk_PlaceObjCmd -- * * This function is invoked to process the "place" Tcl commands. See the * user documentation for details on what it does. * * Results: * A standard Tcl result. * * Side effects: * See the user documentation. * *-------------------------------------------------------------- */ int Tk_PlaceObjCmd( ClientData clientData, /* Interpreter main window. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tk_Window main_win = clientData; Tk_Window tkwin; Slave *slavePtr; TkDisplay *dispPtr; Tk_OptionTable optionTable; static const char *const optionStrings[] = { "configure", "forget", "info", "slaves", NULL }; enum options { PLACE_CONFIGURE, PLACE_FORGET, PLACE_INFO, PLACE_SLAVES }; int index; if (objc < 3) { Tcl_WrongNumArgs(interp, 1, objv, "option|pathName args"); return TCL_ERROR; } /* * Create the option table for this widget class. If it has already been * created, the cached pointer will be returned. */ optionTable = Tk_CreateOptionTable(interp, optionSpecs); /* * Handle special shortcut where window name is first argument. */ if (Tcl_GetString(objv[1])[0] == '.') { if (TkGetWindowFromObj(interp, main_win, objv[1], &tkwin) != TCL_OK) { return TCL_ERROR; } /* * Initialize, if that hasn't been done yet. */ dispPtr = ((TkWindow *) tkwin)->dispPtr; if (!dispPtr->placeInit) { Tcl_InitHashTable(&dispPtr->masterTable, TCL_ONE_WORD_KEYS); Tcl_InitHashTable(&dispPtr->slaveTable, TCL_ONE_WORD_KEYS); dispPtr->placeInit = 1; } return ConfigureSlave(interp, tkwin, optionTable, objc-2, objv+2); } /* * Handle more general case of option followed by window name followed by * possible additional arguments. */ if (TkGetWindowFromObj(interp, main_win, objv[2], &tkwin) != TCL_OK) { return TCL_ERROR; } /* * Initialize, if that hasn't been done yet. */ dispPtr = ((TkWindow *) tkwin)->dispPtr; if (!dispPtr->placeInit) { Tcl_InitHashTable(&dispPtr->masterTable, TCL_ONE_WORD_KEYS); Tcl_InitHashTable(&dispPtr->slaveTable, TCL_ONE_WORD_KEYS); dispPtr->placeInit = 1; } if (Tcl_GetIndexFromObjStruct(interp, objv[1], optionStrings, sizeof(char *), "option", 0, &index) != TCL_OK) { return TCL_ERROR; } switch ((enum options) index) { case PLACE_CONFIGURE: if (objc == 3 || objc == 4) { Tcl_Obj *objPtr; slavePtr = FindSlave(tkwin); if (slavePtr == NULL) { return TCL_OK; } objPtr = Tk_GetOptionInfo(interp, slavePtr, optionTable, (objc == 4) ? objv[3] : NULL, tkwin); if (objPtr == NULL) { return TCL_ERROR; } Tcl_SetObjResult(interp, objPtr); return TCL_OK; } return ConfigureSlave(interp, tkwin, optionTable, objc-3, objv+3); case PLACE_FORGET: if (objc != 3) { Tcl_WrongNumArgs(interp, 2, objv, "pathName"); return TCL_ERROR; } slavePtr = FindSlave(tkwin); if (slavePtr == NULL) { return TCL_OK; } if ((slavePtr->masterPtr != NULL) && (slavePtr->masterPtr->tkwin != Tk_Parent(slavePtr->tkwin))) { Tk_UnmaintainGeometry(slavePtr->tkwin, slavePtr->masterPtr->tkwin); } UnlinkSlave(slavePtr); Tcl_DeleteHashEntry(Tcl_FindHashEntry(&dispPtr->slaveTable, tkwin)); Tk_DeleteEventHandler(tkwin, StructureNotifyMask, SlaveStructureProc, slavePtr); Tk_ManageGeometry(tkwin, NULL, NULL); Tk_UnmapWindow(tkwin); FreeSlave(slavePtr); break; case PLACE_INFO: if (objc != 3) { Tcl_WrongNumArgs(interp, 2, objv, "pathName"); return TCL_ERROR; } return PlaceInfoCommand(interp, tkwin); case PLACE_SLAVES: { Master *masterPtr; if (objc != 3) { Tcl_WrongNumArgs(interp, 2, objv, "pathName"); return TCL_ERROR; } masterPtr = FindMaster(tkwin); if (masterPtr != NULL) { Tcl_Obj *listPtr = Tcl_NewObj(); for (slavePtr = masterPtr->slavePtr; slavePtr != NULL; slavePtr = slavePtr->nextPtr) { Tcl_ListObjAppendElement(NULL, listPtr, TkNewWindowObj(slavePtr->tkwin)); } Tcl_SetObjResult(interp, listPtr); } break; } } return TCL_OK; } /* *---------------------------------------------------------------------- * * CreateSlave -- * * Given a Tk_Window token, find the Slave structure corresponding to * that token, creating a new one if necessary. * * Results: * Pointer to the Slave structure. * * Side effects: * A new Slave structure may be created. * *---------------------------------------------------------------------- */ static Slave * CreateSlave( Tk_Window tkwin, /* Token for desired slave. */ Tk_OptionTable table) { Tcl_HashEntry *hPtr; register Slave *slavePtr; int isNew; TkDisplay *dispPtr = ((TkWindow *) tkwin)->dispPtr; hPtr = Tcl_CreateHashEntry(&dispPtr->slaveTable, (char *) tkwin, &isNew); if (!isNew) { return Tcl_GetHashValue(hPtr); } /* * No preexisting slave structure for that window, so make a new one and * populate it with some default values. */ slavePtr = ckalloc(sizeof(Slave)); memset(slavePtr, 0, sizeof(Slave)); slavePtr->tkwin = tkwin; slavePtr->inTkwin = NULL; slavePtr->anchor = TK_ANCHOR_NW; slavePtr->borderMode = BM_INSIDE; slavePtr->optionTable = table; Tcl_SetHashValue(hPtr, slavePtr); Tk_CreateEventHandler(tkwin, StructureNotifyMask, SlaveStructureProc, slavePtr); return slavePtr; } /* *---------------------------------------------------------------------- * * FreeSlave -- * * Frees the resources held by a Slave structure. * * Results: * None * * Side effects: * Memory are freed. * *---------------------------------------------------------------------- */ static void FreeSlave( Slave *slavePtr) { Tk_FreeConfigOptions((char *) slavePtr, slavePtr->optionTable, slavePtr->tkwin); ckfree(slavePtr); } /* *---------------------------------------------------------------------- * * FindSlave -- * * Given a Tk_Window token, find the Slave structure corresponding to * that token. This is purely a lookup function; it will not create a * record if one does not yet exist. * * Results: * Pointer to Slave structure; NULL if none exists. * * Side effects: * None. * *---------------------------------------------------------------------- */ static Slave * FindSlave( Tk_Window tkwin) /* Token for desired slave. */ { register Tcl_HashEntry *hPtr; TkDisplay *dispPtr = ((TkWindow *) tkwin)->dispPtr; hPtr = Tcl_FindHashEntry(&dispPtr->slaveTable, tkwin); if (hPtr == NULL) { return NULL; } return Tcl_GetHashValue(hPtr); } /* *---------------------------------------------------------------------- * * UnlinkSlave -- * * This function removes a slave window from the chain of slaves in its * master. * * Results: * None. * * Side effects: * The slave list of slavePtr's master changes. * *---------------------------------------------------------------------- */ static void UnlinkSlave( Slave *slavePtr) /* Slave structure to be unlinked. */ { register Master *masterPtr; register Slave *prevPtr; masterPtr = slavePtr->masterPtr; if (masterPtr == NULL) { return; } if (masterPtr->slavePtr == slavePtr) { masterPtr->slavePtr = slavePtr->nextPtr; } else { for (prevPtr = masterPtr->slavePtr; ; prevPtr = prevPtr->nextPtr) { if (prevPtr == NULL) { Tcl_Panic("UnlinkSlave couldn't find slave to unlink"); } if (prevPtr->nextPtr == slavePtr) { prevPtr->nextPtr = slavePtr->nextPtr; break; } } } if (masterPtr->abortPtr != NULL) { *masterPtr->abortPtr = 1; } slavePtr->masterPtr = NULL; } /* *---------------------------------------------------------------------- * * CreateMaster -- * * Given a Tk_Window token, find the Master structure corresponding to * that token, creating a new one if necessary. * * Results: * Pointer to the Master structure. * * Side effects: * A new Master structure may be created. * *---------------------------------------------------------------------- */ static Master * CreateMaster( Tk_Window tkwin) /* Token for desired master. */ { Tcl_HashEntry *hPtr; register Master *masterPtr; int isNew; TkDisplay *dispPtr = ((TkWindow *) tkwin)->dispPtr; hPtr = Tcl_CreateHashEntry(&dispPtr->masterTable, (char *) tkwin, &isNew); if (isNew) { masterPtr = ckalloc(sizeof(Master)); masterPtr->tkwin = tkwin; masterPtr->slavePtr = NULL; masterPtr->abortPtr = NULL; masterPtr->flags = 0; Tcl_SetHashValue(hPtr, masterPtr); Tk_CreateEventHandler(masterPtr->tkwin, StructureNotifyMask, MasterStructureProc, masterPtr); } else { masterPtr = Tcl_GetHashValue(hPtr); } return masterPtr; } /* *---------------------------------------------------------------------- * * FindMaster -- * * Given a Tk_Window token, find the Master structure corresponding to * that token. This is simply a lookup function; a new record will not be * created if one does not already exist. * * Results: * Pointer to the Master structure; NULL if one does not exist for the * given Tk_Window token. * * Side effects: * None. * *---------------------------------------------------------------------- */ static Master * FindMaster( Tk_Window tkwin) /* Token for desired master. */ { register Tcl_HashEntry *hPtr; TkDisplay *dispPtr = ((TkWindow *) tkwin)->dispPtr; hPtr = Tcl_FindHashEntry(&dispPtr->masterTable, tkwin); if (hPtr == NULL) { return NULL; } return Tcl_GetHashValue(hPtr); } /* *---------------------------------------------------------------------- * * ConfigureSlave -- * * This function is called to process an argv/argc list to reconfigure * the placement of a window. * * Results: * A standard Tcl result. If an error occurs then a message is left in * the interp's result. * * Side effects: * Information in slavePtr may change, and slavePtr's master is scheduled * for reconfiguration. * *---------------------------------------------------------------------- */ static int ConfigureSlave( Tcl_Interp *interp, /* Used for error reporting. */ Tk_Window tkwin, /* Token for the window to manipulate. */ Tk_OptionTable table, /* Token for option table. */ int objc, /* Number of config arguments. */ Tcl_Obj *const objv[]) /* Object values for arguments. */ { register Master *masterPtr; Tk_SavedOptions savedOptions; int mask; Slave *slavePtr; Tk_Window masterWin = (Tk_Window) NULL; TkWindow *master; if (Tk_TopWinHierarchy(tkwin)) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't use placer on top-level window \"%s\"; use " "wm command instead", Tk_PathName(tkwin))); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "TOPLEVEL", NULL); return TCL_ERROR; } slavePtr = CreateSlave(tkwin, table); if (Tk_SetOptions(interp, slavePtr, table, objc, objv, slavePtr->tkwin, &savedOptions, &mask) != TCL_OK) { goto error; } /* * Set slave flags. First clear the field, then add bits as needed. */ slavePtr->flags = 0; if (slavePtr->heightPtr) { slavePtr->flags |= CHILD_HEIGHT; } if (slavePtr->relHeightPtr) { slavePtr->flags |= CHILD_REL_HEIGHT; } if (slavePtr->relWidthPtr) { slavePtr->flags |= CHILD_REL_WIDTH; } if (slavePtr->widthPtr) { slavePtr->flags |= CHILD_WIDTH; } if (!(mask & IN_MASK) && (slavePtr->masterPtr != NULL)) { /* * If no -in option was passed and the slave is already placed then * just recompute the placement. */ masterPtr = slavePtr->masterPtr; goto scheduleLayout; } else if (mask & IN_MASK) { /* -in changed */ Tk_Window tkwin; Tk_Window ancestor; tkwin = slavePtr->inTkwin; /* * Make sure that the new master is either the logical parent of the * slave or a descendant of that window, and that the master and slave * aren't the same. */ for (ancestor = tkwin; ; ancestor = Tk_Parent(ancestor)) { if (ancestor == Tk_Parent(slavePtr->tkwin)) { break; } if (Tk_TopWinHierarchy(ancestor)) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't place %s relative to %s", Tk_PathName(slavePtr->tkwin), Tk_PathName(tkwin))); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "HIERARCHY", NULL); goto error; } } if (slavePtr->tkwin == tkwin) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't place %s relative to itself", Tk_PathName(slavePtr->tkwin))); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "LOOP", NULL); goto error; } /* * Check for management loops. */ for (master = (TkWindow *)tkwin; master != NULL; master = (TkWindow *)TkGetGeomMaster(master)) { if (master == (TkWindow *)slavePtr->tkwin) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "can't put %s inside %s, would cause management loop", Tk_PathName(slavePtr->tkwin), Tk_PathName(tkwin))); Tcl_SetErrorCode(interp, "TK", "GEOMETRY", "LOOP", NULL); goto error; } } if (tkwin != Tk_Parent(slavePtr->tkwin)) { ((TkWindow *)slavePtr->tkwin)->maintainerPtr = (TkWindow *)tkwin; } if ((slavePtr->masterPtr != NULL) && (slavePtr->masterPtr->tkwin == tkwin)) { /* * Re-using same old master. Nothing to do. */ masterPtr = slavePtr->masterPtr; goto scheduleLayout; } if ((slavePtr->masterPtr != NULL) && (slavePtr->masterPtr->tkwin != Tk_Parent(slavePtr->tkwin))) { Tk_UnmaintainGeometry(slavePtr->tkwin, slavePtr->masterPtr->tkwin); } UnlinkSlave(slavePtr); masterWin = tkwin; } /* * If there's no master specified for this slave, use its Tk_Parent. */ if (masterWin == NULL) { masterWin = Tk_Parent(slavePtr->tkwin); slavePtr->inTkwin = masterWin; } /* * Manage the slave window in this master. */ masterPtr = CreateMaster(masterWin); slavePtr->masterPtr = masterPtr; slavePtr->nextPtr = masterPtr->slavePtr; masterPtr->slavePtr = slavePtr; Tk_ManageGeometry(slavePtr->tkwin, &placerType, slavePtr); /* * Arrange for the master to be re-arranged at the first idle moment. */ scheduleLayout: Tk_FreeSavedOptions(&savedOptions); if (!(masterPtr->flags & PARENT_RECONFIG_PENDING)) { masterPtr->flags |= PARENT_RECONFIG_PENDING; Tcl_DoWhenIdle(RecomputePlacement, masterPtr); } return TCL_OK; /* * Error while processing some option, cleanup and return. */ error: Tk_RestoreSavedOptions(&savedOptions); return TCL_ERROR; } /* *---------------------------------------------------------------------- * * PlaceInfoCommand -- * * Implementation of the [place info] subcommand. See the user * documentation for information on what it does. * * Results: * Standard Tcl result. * * Side effects: * If the given tkwin is managed by the placer, this function will put * information about that placement in the interp's result. * *---------------------------------------------------------------------- */ static int PlaceInfoCommand( Tcl_Interp *interp, /* Interp into which to place result. */ Tk_Window tkwin) /* Token for the window to get info on. */ { Slave *slavePtr; Tcl_Obj *infoObj; slavePtr = FindSlave(tkwin); if (slavePtr == NULL) { return TCL_OK; } infoObj = Tcl_NewObj(); if (slavePtr->masterPtr != NULL) { Tcl_AppendToObj(infoObj, "-in", -1); Tcl_ListObjAppendElement(NULL, infoObj, TkNewWindowObj(slavePtr->masterPtr->tkwin)); Tcl_AppendToObj(infoObj, " ", -1); } Tcl_AppendPrintfToObj(infoObj, "-x %d -relx %.4g -y %d -rely %.4g", slavePtr->x, slavePtr->relX, slavePtr->y, slavePtr->relY); if (slavePtr->flags & CHILD_WIDTH) { Tcl_AppendPrintfToObj(infoObj, " -width %d", slavePtr->width); } else { Tcl_AppendToObj(infoObj, " -width {}", -1); } if (slavePtr->flags & CHILD_REL_WIDTH) { Tcl_AppendPrintfToObj(infoObj, " -relwidth %.4g", slavePtr->relWidth); } else { Tcl_AppendToObj(infoObj, " -relwidth {}", -1); } if (slavePtr->flags & CHILD_HEIGHT) { Tcl_AppendPrintfToObj(infoObj, " -height %d", slavePtr->height); } else { Tcl_AppendToObj(infoObj, " -height {}", -1); } if (slavePtr->flags & CHILD_REL_HEIGHT) { Tcl_AppendPrintfToObj(infoObj, " -relheight %.4g", slavePtr->relHeight); } else { Tcl_AppendToObj(infoObj, " -relheight {}", -1); } Tcl_AppendPrintfToObj(infoObj, " -anchor %s -bordermode %s", Tk_NameOfAnchor(slavePtr->anchor), borderModeStrings[slavePtr->borderMode]); Tcl_SetObjResult(interp, infoObj); return TCL_OK; } /* *---------------------------------------------------------------------- * * RecomputePlacement -- * * This function is called as a when-idle handler. It recomputes the * geometries of all the slaves of a given master. * * Results: * None. * * Side effects: * Windows may change size or shape. * *---------------------------------------------------------------------- */ static void RecomputePlacement( ClientData clientData) /* Pointer to Master record. */ { register Master *masterPtr = clientData; register Slave *slavePtr; int x, y, width, height, tmp; int masterWidth, masterHeight, masterX, masterY; double x1, y1, x2, y2; int abort; /* May get set to non-zero to abort this * placement operation. */ masterPtr->flags &= ~PARENT_RECONFIG_PENDING; /* * Abort any nested call to RecomputePlacement for this window, since * we'll do everything necessary here, and set up so this call can be * aborted if necessary. */ if (masterPtr->abortPtr != NULL) { *masterPtr->abortPtr = 1; } masterPtr->abortPtr = &abort; abort = 0; Tcl_Preserve(masterPtr); /* * Iterate over all the slaves for the master. Each slave's geometry can * be computed independently of the other slaves. Changes to the window's * structure could cause almost anything to happen, including deleting the * parent or child. If this happens, we'll be told to abort. */ for (slavePtr = masterPtr->slavePtr; slavePtr != NULL && !abort; slavePtr = slavePtr->nextPtr) { /* * Step 1: compute size and borderwidth of master, taking into account * desired border mode. */ masterX = masterY = 0; masterWidth = Tk_Width(masterPtr->tkwin); masterHeight = Tk_Height(masterPtr->tkwin); if (slavePtr->borderMode == BM_INSIDE) { masterX = Tk_InternalBorderLeft(masterPtr->tkwin); masterY = Tk_InternalBorderTop(masterPtr->tkwin); masterWidth -= masterX + Tk_InternalBorderRight(masterPtr->tkwin); masterHeight -= masterY + Tk_InternalBorderBottom(masterPtr->tkwin); } else if (slavePtr->borderMode == BM_OUTSIDE) { masterX = masterY = -Tk_Changes(masterPtr->tkwin)->border_width; masterWidth -= 2 * masterX; masterHeight -= 2 * masterY; } /* * Step 2: compute size of slave (outside dimensions including border) * and location of anchor point within master. */ x1 = slavePtr->x + masterX + (slavePtr->relX*masterWidth); x = (int) (x1 + ((x1 > 0) ? 0.5 : -0.5)); y1 = slavePtr->y + masterY + (slavePtr->relY*masterHeight); y = (int) (y1 + ((y1 > 0) ? 0.5 : -0.5)); if (slavePtr->flags & (CHILD_WIDTH|CHILD_REL_WIDTH)) { width = 0; if (slavePtr->flags & CHILD_WIDTH) { width += slavePtr->width; } if (slavePtr->flags & CHILD_REL_WIDTH) { /* * The code below is a bit tricky. In order to round correctly * when both relX and relWidth are specified, compute the * location of the right edge and round that, then compute * width. If we compute the width and round it, rounding * errors in relX and relWidth accumulate. */ x2 = x1 + (slavePtr->relWidth*masterWidth); tmp = (int) (x2 + ((x2 > 0) ? 0.5 : -0.5)); width += tmp - x; } } else { width = Tk_ReqWidth(slavePtr->tkwin) + 2*Tk_Changes(slavePtr->tkwin)->border_width; } if (slavePtr->flags & (CHILD_HEIGHT|CHILD_REL_HEIGHT)) { height = 0; if (slavePtr->flags & CHILD_HEIGHT) { height += slavePtr->height; } if (slavePtr->flags & CHILD_REL_HEIGHT) { /* * See note above for rounding errors in width computation. */ y2 = y1 + (slavePtr->relHeight*masterHeight); tmp = (int) (y2 + ((y2 > 0) ? 0.5 : -0.5)); height += tmp - y; } } else { height = Tk_ReqHeight(slavePtr->tkwin) + 2*Tk_Changes(slavePtr->tkwin)->border_width; } /* * Step 3: adjust the x and y positions so that the desired anchor * point on the slave appears at that position. Also adjust for the * border mode and master's border. */ switch (slavePtr->anchor) { case TK_ANCHOR_N: x -= width/2; break; case TK_ANCHOR_NE: x -= width; break; case TK_ANCHOR_E: x -= width; y -= height/2; break; case TK_ANCHOR_SE: x -= width; y -= height; break; case TK_ANCHOR_S: x -= width/2; y -= height; break; case TK_ANCHOR_SW: y -= height; break; case TK_ANCHOR_W: y -= height/2; break; case TK_ANCHOR_NW: break; case TK_ANCHOR_CENTER: x -= width/2; y -= height/2; break; } /* * Step 4: adjust width and height again to reflect inside dimensions * of window rather than outside. Also make sure that the width and * height aren't zero. */ width -= 2*Tk_Changes(slavePtr->tkwin)->border_width; height -= 2*Tk_Changes(slavePtr->tkwin)->border_width; if (width <= 0) { width = 1; } if (height <= 0) { height = 1; } /* * Step 5: reconfigure the window and map it if needed. If the slave * is a child of the master, we do this ourselves. If the slave isn't * a child of the master, let Tk_MaintainGeometry do the work (it will * re-adjust things as relevant windows map, unmap, and move). */ if (masterPtr->tkwin == Tk_Parent(slavePtr->tkwin)) { if ((x != Tk_X(slavePtr->tkwin)) || (y != Tk_Y(slavePtr->tkwin)) || (width != Tk_Width(slavePtr->tkwin)) || (height != Tk_Height(slavePtr->tkwin))) { Tk_MoveResizeWindow(slavePtr->tkwin, x, y, width, height); } if (abort) { break; } /* * Don't map the slave unless the master is mapped: the slave will * get mapped later, when the master is mapped. */ if (Tk_IsMapped(masterPtr->tkwin)) { Tk_MapWindow(slavePtr->tkwin); } } else { if ((width <= 0) || (height <= 0)) { Tk_UnmaintainGeometry(slavePtr->tkwin, masterPtr->tkwin); Tk_UnmapWindow(slavePtr->tkwin); } else { Tk_MaintainGeometry(slavePtr->tkwin, masterPtr->tkwin, x, y, width, height); } } } masterPtr->abortPtr = NULL; Tcl_Release(masterPtr); } /* *---------------------------------------------------------------------- * * MasterStructureProc -- * * This function is invoked by the Tk event handler when StructureNotify * events occur for a master window. * * Results: * None. * * Side effects: * Structures get cleaned up if the window was deleted. If the window was * resized then slave geometries get recomputed. * *---------------------------------------------------------------------- */ static void MasterStructureProc( ClientData clientData, /* Pointer to Master structure for window * referred to by eventPtr. */ XEvent *eventPtr) /* Describes what just happened. */ { register Master *masterPtr = clientData; register Slave *slavePtr, *nextPtr; TkDisplay *dispPtr = ((TkWindow *) masterPtr->tkwin)->dispPtr; switch (eventPtr->type) { case ConfigureNotify: if ((masterPtr->slavePtr != NULL) && !(masterPtr->flags & PARENT_RECONFIG_PENDING)) { masterPtr->flags |= PARENT_RECONFIG_PENDING; Tcl_DoWhenIdle(RecomputePlacement, masterPtr); } return; case DestroyNotify: for (slavePtr = masterPtr->slavePtr; slavePtr != NULL; slavePtr = nextPtr) { slavePtr->masterPtr = NULL; nextPtr = slavePtr->nextPtr; slavePtr->nextPtr = NULL; } Tcl_DeleteHashEntry(Tcl_FindHashEntry(&dispPtr->masterTable, masterPtr->tkwin)); if (masterPtr->flags & PARENT_RECONFIG_PENDING) { Tcl_CancelIdleCall(RecomputePlacement, masterPtr); } masterPtr->tkwin = NULL; if (masterPtr->abortPtr != NULL) { *masterPtr->abortPtr = 1; } Tcl_EventuallyFree(masterPtr, TCL_DYNAMIC); return; case MapNotify: /* * When a master gets mapped, must redo the geometry computation so * that all of its slaves get remapped. */ if ((masterPtr->slavePtr != NULL) && !(masterPtr->flags & PARENT_RECONFIG_PENDING)) { masterPtr->flags |= PARENT_RECONFIG_PENDING; Tcl_DoWhenIdle(RecomputePlacement, masterPtr); } return; case UnmapNotify: /* * Unmap all of the slaves when the master gets unmapped, so that they * don't keep redisplaying themselves. */ for (slavePtr = masterPtr->slavePtr; slavePtr != NULL; slavePtr = slavePtr->nextPtr) { Tk_UnmapWindow(slavePtr->tkwin); } return; } } /* *---------------------------------------------------------------------- * * SlaveStructureProc -- * * This function is invoked by the Tk event handler when StructureNotify * events occur for a slave window. * * Results: * None. * * Side effects: * Structures get cleaned up if the window was deleted. * *---------------------------------------------------------------------- */ static void SlaveStructureProc( ClientData clientData, /* Pointer to Slave structure for window * referred to by eventPtr. */ XEvent *eventPtr) /* Describes what just happened. */ { register Slave *slavePtr = clientData; TkDisplay *dispPtr = ((TkWindow *) slavePtr->tkwin)->dispPtr; if (eventPtr->type == DestroyNotify) { if (slavePtr->masterPtr != NULL) { UnlinkSlave(slavePtr); } Tcl_DeleteHashEntry(Tcl_FindHashEntry(&dispPtr->slaveTable, slavePtr->tkwin)); FreeSlave(slavePtr); } } /* *---------------------------------------------------------------------- * * PlaceRequestProc -- * * This function is invoked by Tk whenever a slave managed by us changes * its requested geometry. * * Results: * None. * * Side effects: * The window will get relayed out, if its requested size has anything to * do with its actual size. * *---------------------------------------------------------------------- */ /* ARGSUSED */ static void PlaceRequestProc( ClientData clientData, /* Pointer to our record for slave. */ Tk_Window tkwin) /* Window that changed its desired size. */ { Slave *slavePtr = clientData; Master *masterPtr; if ((slavePtr->flags & (CHILD_WIDTH|CHILD_REL_WIDTH)) && (slavePtr->flags & (CHILD_HEIGHT|CHILD_REL_HEIGHT))) { /* * Send a ConfigureNotify to indicate that the size change * request was rejected. */ TkDoConfigureNotify((TkWindow *)(slavePtr->tkwin)); return; } masterPtr = slavePtr->masterPtr; if (masterPtr == NULL) { return; } if (!(masterPtr->flags & PARENT_RECONFIG_PENDING)) { masterPtr->flags |= PARENT_RECONFIG_PENDING; Tcl_DoWhenIdle(RecomputePlacement, masterPtr); } } /* *-------------------------------------------------------------- * * PlaceLostSlaveProc -- * * This function is invoked by Tk whenever some other geometry claims * control over a slave that used to be managed by us. * * Results: * None. * * Side effects: * Forgets all placer-related information about the slave. * *-------------------------------------------------------------- */ /* ARGSUSED */ static void PlaceLostSlaveProc( ClientData clientData, /* Slave structure for slave window that was * stolen away. */ Tk_Window tkwin) /* Tk's handle for the slave window. */ { register Slave *slavePtr = clientData; TkDisplay *dispPtr = ((TkWindow *) slavePtr->tkwin)->dispPtr; if (slavePtr->masterPtr->tkwin != Tk_Parent(slavePtr->tkwin)) { Tk_UnmaintainGeometry(slavePtr->tkwin, slavePtr->masterPtr->tkwin); } Tk_UnmapWindow(tkwin); UnlinkSlave(slavePtr); Tcl_DeleteHashEntry(Tcl_FindHashEntry(&dispPtr->slaveTable, tkwin)); Tk_DeleteEventHandler(tkwin, StructureNotifyMask, SlaveStructureProc, slavePtr); FreeSlave(slavePtr); } /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */