/* * tkUnixSelect.c -- * * This file contains X specific routines for manipulating selections. * * Copyright (c) 1995-1997 Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tkUnixSelect.c,v 1.21.4.2 2009/07/18 19:32:20 dkf Exp $ */ #include "tkInt.h" #include "tkSelect.h" typedef struct ConvertInfo { int offset; /* The starting byte offset into the selection * for the next chunk; -1 means all data has * been transferred for this conversion. -2 * means only the final zero-length transfer * still has to be done. Otherwise it is the * offset of the next chunk of data to * transfer. */ Tcl_EncodingState state; /* The encoding state needed across chunks. */ char buffer[TCL_UTF_MAX]; /* A buffer to hold part of a UTF character * that is split across chunks.*/ } ConvertInfo; /* * When handling INCR-style selection retrievals, the selection owner uses the * following data structure to communicate between the ConvertSelection * function and TkSelPropProc. */ typedef struct IncrInfo { TkWindow *winPtr; /* Window that owns selection. */ Atom selection; /* Selection that is being retrieved. */ Atom *multAtoms; /* Information about conversions to perform: * one or more pairs of (target, property). * This either points to a retrieved property * (for MULTIPLE retrievals) or to a static * array. */ unsigned long numConversions; /* Number of entries in converts (same as # of * pairs in multAtoms). */ ConvertInfo *converts; /* One entry for each pair in multAtoms. This * array is malloc-ed. */ char **tempBufs; /* One pointer for each pair in multAtoms; * each pointer is either NULL, or it points * to a small bit of character data that was * left over from the previous chunk. */ Tcl_EncodingState *state; /* One state info per pair in multAtoms: State * info for encoding conversions that span * multiple buffers. */ int *flags; /* One state flag per pair in multAtoms: * Encoding flags, set to TCL_ENCODING_START * at the beginning of an INCR transfer. */ int numIncrs; /* Number of entries in converts that aren't * -1 (i.e. # of INCR-mode transfers not yet * completed). */ Tcl_TimerToken timeout; /* Token for timer function. */ int idleTime; /* Number of seconds since we heard anything * from the selection requestor. */ Window reqWindow; /* Requestor's window id. */ Time time; /* Timestamp corresponding to selection at * beginning of request; used to abort * transfer if selection changes. */ struct IncrInfo *nextPtr; /* Next in list of all INCR-style retrievals * currently pending. */ } IncrInfo; typedef struct ThreadSpecificData { IncrInfo *pendingIncrs; /* List of all incr structures currently * active. */ } ThreadSpecificData; static Tcl_ThreadDataKey dataKey; /* * Largest property that we'll accept when sending or receiving the selection: */ #define MAX_PROP_WORDS 100000 static TkSelRetrievalInfo *pendingRetrievals = NULL; /* List of all retrievals currently being * waited for. */ /* * Forward declarations for functions defined in this file: */ static void ConvertSelection(TkWindow *winPtr, XSelectionRequestEvent *eventPtr); static void IncrTimeoutProc(ClientData clientData); static void SelCvtFromX32(long *propPtr, int numValues, Atom type, Tk_Window tkwin, Tcl_DString *dsPtr); static void SelCvtFromX8(char *propPtr, int numValues, Atom type, Tk_Window tkwin, Tcl_DString *dsPtr); static long * SelCvtToX(char *string, Atom type, Tk_Window tkwin, int *numLongsPtr); static int SelectionSize(TkSelHandler *selPtr); static void SelRcvIncrProc(ClientData clientData, XEvent *eventPtr); static void SelTimeoutProc(ClientData clientData); /* *---------------------------------------------------------------------- * * TkSelGetSelection -- * * Retrieve the specified selection from another process. * * Results: * The return value is a standard Tcl return value. If an error occurs * (such as no selection exists) then an error message is left in the * interp's result. * * Side effects: * None. * *---------------------------------------------------------------------- */ int TkSelGetSelection( Tcl_Interp *interp, /* Interpreter to use for reporting errors. */ Tk_Window tkwin, /* Window on whose behalf to retrieve the * selection (determines display from which to * retrieve). */ Atom selection, /* Selection to retrieve. */ Atom target, /* Desired form in which selection is to be * returned. */ Tk_GetSelProc *proc, /* Function to call to process the selection, * once it has been retrieved. */ ClientData clientData) /* Arbitrary value to pass to proc. */ { TkSelRetrievalInfo retr; TkWindow *winPtr = (TkWindow *) tkwin; TkDisplay *dispPtr = winPtr->dispPtr; /* * The selection is owned by some other process. To retrieve it, first * record information about the retrieval in progress. Use an internal * window as the requestor. */ retr.interp = interp; if (dispPtr->clipWindow == NULL) { int result; result = TkClipInit(interp, dispPtr); if (result != TCL_OK) { return result; } } retr.winPtr = (TkWindow *) dispPtr->clipWindow; retr.selection = selection; retr.property = selection; retr.target = target; retr.proc = proc; retr.clientData = clientData; retr.result = -1; retr.idleTime = 0; retr.encFlags = TCL_ENCODING_START; retr.nextPtr = pendingRetrievals; Tcl_DStringInit(&retr.buf); pendingRetrievals = &retr; /* * Initiate the request for the selection. Note: can't use TkCurrentTime * for the time. If we do, and this application hasn't received any X * events in a long time, the current time will be way in the past and * could even predate the time when the selection was made; if this * happens, the request will be rejected. */ XConvertSelection(winPtr->display, retr.selection, retr.target, retr.property, retr.winPtr->window, CurrentTime); /* * Enter a loop processing X events until the selection has been retrieved * and processed. If no response is received within a few seconds, then * timeout. */ retr.timeout = Tcl_CreateTimerHandler(1000, SelTimeoutProc, (ClientData) &retr); while (retr.result == -1) { Tcl_DoOneEvent(0); } Tcl_DeleteTimerHandler(retr.timeout); /* * Unregister the information about the selection retrieval in progress. */ if (pendingRetrievals == &retr) { pendingRetrievals = retr.nextPtr; } else { TkSelRetrievalInfo *retrPtr; for (retrPtr = pendingRetrievals; retrPtr != NULL; retrPtr = retrPtr->nextPtr) { if (retrPtr->nextPtr == &retr) { retrPtr->nextPtr = retr.nextPtr; break; } } } Tcl_DStringFree(&retr.buf); return retr.result; } /* *---------------------------------------------------------------------- * * TkSelPropProc -- * * This function is invoked when property-change events occur on windows * not known to the toolkit. Its function is to implement the sending * side of the INCR selection retrieval protocol when the selection * requestor deletes the property containing a part of the selection. * * Results: * None. * * Side effects: * If the property that is receiving the selection was just deleted, then * a new piece of the selection is fetched and placed in the property, * until eventually there's no more selection to fetch. * *---------------------------------------------------------------------- */ void TkSelPropProc( register XEvent *eventPtr) /* X PropertyChange event. */ { register IncrInfo *incrPtr; register TkSelHandler *selPtr; int length, numItems; unsigned long i; Atom target, formatType; long buffer[TK_SEL_WORDS_AT_ONCE]; TkDisplay *dispPtr = TkGetDisplay(eventPtr->xany.display); Tk_ErrorHandler errorHandler; ThreadSpecificData *tsdPtr = (ThreadSpecificData *) Tcl_GetThreadData(&dataKey, sizeof(ThreadSpecificData)); /* * See if this event announces the deletion of a property being used for * an INCR transfer. If so, then add the next chunk of data to the * property. */ if (eventPtr->xproperty.state != PropertyDelete) { return; } for (incrPtr = tsdPtr->pendingIncrs; incrPtr != NULL; incrPtr = incrPtr->nextPtr) { if (incrPtr->reqWindow != eventPtr->xproperty.window) { continue; } /* * For each conversion that has been requested, handle any chunks that * haven't been transmitted yet. */ for (i = 0; i < incrPtr->numConversions; i++) { if ((eventPtr->xproperty.atom != incrPtr->multAtoms[2*i + 1]) || (incrPtr->converts[i].offset == -1)) { continue; } target = incrPtr->multAtoms[2*i]; incrPtr->idleTime = 0; /* * Look for a matching selection handler. */ for (selPtr = incrPtr->winPtr->selHandlerList; ; selPtr = selPtr->nextPtr) { if (selPtr == NULL) { /* * No handlers match, so mark the conversion as done. */ incrPtr->multAtoms[2*i + 1] = None; incrPtr->converts[i].offset = -1; incrPtr->numIncrs --; return; } if ((selPtr->target == target) && (selPtr->selection == incrPtr->selection)) { break; } } /* * We found a handler, so get the next chunk from it. */ formatType = selPtr->format; if (incrPtr->converts[i].offset == -2) { /* * We already got the last chunk, so send a null chunk to * indicate that we are finished. */ numItems = 0; length = 0; } else { TkSelInProgress ip; ip.selPtr = selPtr; ip.nextPtr = TkSelGetInProgress(); TkSelSetInProgress(&ip); /* * Copy any bytes left over from a partial character at the * end of the previous chunk into the beginning of the buffer. * Pass the rest of the buffer space into the selection * handler. */ length = strlen(incrPtr->converts[i].buffer); strcpy((char *)buffer, incrPtr->converts[i].buffer); numItems = (*selPtr->proc)(selPtr->clientData, incrPtr->converts[i].offset, ((char *) buffer) + length, TK_SEL_BYTES_AT_ONCE - length); TkSelSetInProgress(ip.nextPtr); if (ip.selPtr == NULL) { /* * The selection handler deleted itself. */ return; } if (numItems < 0) { numItems = 0; } numItems += length; if (numItems > TK_SEL_BYTES_AT_ONCE) { Tcl_Panic("selection handler returned too many bytes"); } } ((char *) buffer)[numItems] = 0; errorHandler = Tk_CreateErrorHandler(eventPtr->xproperty.display, -1, -1, -1, (int (*)()) NULL, NULL); /* * Encode the data using the proper format for each type. */ if ((formatType == XA_STRING) || (dispPtr && formatType==dispPtr->utf8Atom) || (dispPtr && formatType==dispPtr->compoundTextAtom)) { Tcl_DString ds; int encodingCvtFlags; int srcLen, dstLen, result, srcRead, dstWrote, soFar; char *src, *dst; Tcl_Encoding encoding; /* * Set up the encoding state based on the format and whether * this is the first and/or last chunk. */ encodingCvtFlags = 0; if (incrPtr->converts[i].offset == 0) { encodingCvtFlags |= TCL_ENCODING_START; } if (numItems < TK_SEL_BYTES_AT_ONCE) { encodingCvtFlags |= TCL_ENCODING_END; } if (formatType == XA_STRING) { encoding = Tcl_GetEncoding(NULL, "iso8859-1"); } else if (dispPtr && formatType==dispPtr->utf8Atom) { encoding = Tcl_GetEncoding(NULL, "utf-8"); } else { encoding = Tcl_GetEncoding(NULL, "iso2022"); } /* * Now convert the data. */ src = (char *)buffer; srcLen = numItems; Tcl_DStringInit(&ds); dst = Tcl_DStringValue(&ds); dstLen = ds.spaceAvl - 1; /* * Now convert the data, growing the destination buffer as * needed. */ while (1) { result = Tcl_UtfToExternal(NULL, encoding, src, srcLen, encodingCvtFlags, &incrPtr->converts[i].state, dst, dstLen, &srcRead, &dstWrote, NULL); soFar = dst + dstWrote - Tcl_DStringValue(&ds); encodingCvtFlags &= ~TCL_ENCODING_START; src += srcRead; srcLen -= srcRead; if (result != TCL_CONVERT_NOSPACE) { Tcl_DStringSetLength(&ds, soFar); break; } if (Tcl_DStringLength(&ds) == 0) { Tcl_DStringSetLength(&ds, dstLen); } Tcl_DStringSetLength(&ds, 2 * Tcl_DStringLength(&ds) + 1); dst = Tcl_DStringValue(&ds) + soFar; dstLen = Tcl_DStringLength(&ds) - soFar - 1; } Tcl_DStringSetLength(&ds, soFar); if (encoding) { Tcl_FreeEncoding(encoding); } /* * Set the property to the encoded string value. */ XChangeProperty(eventPtr->xproperty.display, eventPtr->xproperty.window, eventPtr->xproperty.atom, formatType, 8, PropModeReplace, (unsigned char *) Tcl_DStringValue(&ds), Tcl_DStringLength(&ds)); /* * Preserve any left-over bytes. */ if (srcLen > TCL_UTF_MAX) { Tcl_Panic("selection conversion left too many bytes unconverted"); } memcpy(incrPtr->converts[i].buffer, src, (size_t) srcLen+1); Tcl_DStringFree(&ds); } else { /* * Set the property to the encoded string value. */ char *propPtr = (char *) SelCvtToX((char *) buffer, formatType, (Tk_Window) incrPtr->winPtr, &numItems); if (propPtr == NULL) { numItems = 0; } XChangeProperty(eventPtr->xproperty.display, eventPtr->xproperty.window, eventPtr->xproperty.atom, formatType, 32, PropModeReplace, (unsigned char *) propPtr, numItems); if (propPtr != NULL) { ckfree(propPtr); } } Tk_DeleteErrorHandler(errorHandler); /* * Compute the next offset value. If this was the last chunk, then * set the offset to -2. If this was an empty chunk, then set the * offset to -1 to indicate we are done. */ if (numItems < TK_SEL_BYTES_AT_ONCE) { if (numItems <= 0) { incrPtr->converts[i].offset = -1; incrPtr->numIncrs--; } else { incrPtr->converts[i].offset = -2; } } else { /* * Advance over the selection data that was consumed this * time. */ incrPtr->converts[i].offset += numItems - length; } return; } } } /* *-------------------------------------------------------------- * * TkSelEventProc -- * * This function is invoked whenever a selection-related event occurs. * It does the lion's share of the work in implementing the selection * protocol. * * Results: * None. * * Side effects: * Lots: depends on the type of event. * *-------------------------------------------------------------- */ void TkSelEventProc( Tk_Window tkwin, /* Window for which event was targeted. */ register XEvent *eventPtr) /* X event: either SelectionClear, * SelectionRequest, or SelectionNotify. */ { register TkWindow *winPtr = (TkWindow *) tkwin; TkDisplay *dispPtr = winPtr->dispPtr; Tcl_Interp *interp; /* * Case #1: SelectionClear events. */ if (eventPtr->type == SelectionClear) { TkSelClearSelection(tkwin, eventPtr); } /* * Case #2: SelectionNotify events. Call the relevant function to handle * the incoming selection. */ if (eventPtr->type == SelectionNotify) { register TkSelRetrievalInfo *retrPtr; char *propInfo, **propInfoPtr = &propInfo; Atom type; int format, result; unsigned long numItems, bytesAfter; Tcl_DString ds; for (retrPtr = pendingRetrievals; ; retrPtr = retrPtr->nextPtr) { if (retrPtr == NULL) { return; } if ((retrPtr->winPtr == winPtr) && (retrPtr->selection == eventPtr->xselection.selection) && (retrPtr->target == eventPtr->xselection.target) && (retrPtr->result == -1)) { if (retrPtr->property == eventPtr->xselection.property) { break; } if (eventPtr->xselection.property == None) { Tcl_SetResult(retrPtr->interp, NULL, TCL_STATIC); Tcl_AppendResult(retrPtr->interp, Tk_GetAtomName(tkwin, retrPtr->selection), " selection doesn't exist or form \"", Tk_GetAtomName(tkwin, retrPtr->target), "\" not defined", NULL); retrPtr->result = TCL_ERROR; return; } } } propInfo = NULL; result = XGetWindowProperty(eventPtr->xselection.display, eventPtr->xselection.requestor, retrPtr->property, 0, MAX_PROP_WORDS, False, (Atom) AnyPropertyType, &type, &format, &numItems, &bytesAfter, (unsigned char **) propInfoPtr); if ((result != Success) || (type == None)) { return; } if (bytesAfter != 0) { Tcl_SetResult(retrPtr->interp, "selection property too large", TCL_STATIC); retrPtr->result = TCL_ERROR; XFree(propInfo); return; } if ((type == XA_STRING) || (type == dispPtr->textAtom) || (type == dispPtr->compoundTextAtom)) { Tcl_Encoding encoding; if (format != 8) { char buf[64 + TCL_INTEGER_SPACE]; sprintf(buf, "bad format for string selection: wanted \"8\", got \"%d\"", format); Tcl_SetResult(retrPtr->interp, buf, TCL_VOLATILE); retrPtr->result = TCL_ERROR; return; } interp = retrPtr->interp; Tcl_Preserve((ClientData) interp); /* * Convert the X selection data into UTF before passing it to the * selection callback. Note that the COMPOUND_TEXT uses a modified * iso2022 encoding, not the current system encoding. For now * we'll just blindly apply the iso2022 encoding. This is probably * wrong, but it's a placeholder until we figure out what we're * really supposed to do. For STRING, we need to use Latin-1 * instead. Again, it's not really the full iso8859-1 space, but * this is close enough. */ if (type == dispPtr->compoundTextAtom) { encoding = Tcl_GetEncoding(NULL, "iso2022"); } else { encoding = Tcl_GetEncoding(NULL, "iso8859-1"); } Tcl_ExternalToUtfDString(encoding, propInfo, (int)numItems, &ds); if (encoding) { Tcl_FreeEncoding(encoding); } retrPtr->result = (*retrPtr->proc)(retrPtr->clientData, interp, Tcl_DStringValue(&ds)); Tcl_DStringFree(&ds); Tcl_Release((ClientData) interp); } else if (type == dispPtr->utf8Atom) { /* * The X selection data is in UTF-8 format already. We can't * guarantee that propInfo is NULL-terminated, so we might have to * copy the string. */ char *propData = propInfo; if (format != 8) { char buf[64 + TCL_INTEGER_SPACE]; sprintf(buf, "bad format for string selection: wanted \"8\", got \"%d\"", format); Tcl_SetResult(retrPtr->interp, buf, TCL_VOLATILE); retrPtr->result = TCL_ERROR; return; } if (propInfo[numItems] != '\0') { propData = ckalloc((size_t) numItems + 1); strcpy(propData, propInfo); propData[numItems] = '\0'; } retrPtr->result = (*retrPtr->proc)(retrPtr->clientData, retrPtr->interp, propData); if (propData != propInfo) { ckfree((char *) propData); } } else if (type == dispPtr->incrAtom) { /* * It's a !?#@!?!! INCR-style reception. Arrange to receive the * selection in pieces, using the ICCCM protocol, then hang around * until either the selection is all here or a timeout occurs. */ retrPtr->idleTime = 0; Tk_CreateEventHandler(tkwin, PropertyChangeMask, SelRcvIncrProc, (ClientData) retrPtr); XDeleteProperty(Tk_Display(tkwin), Tk_WindowId(tkwin), retrPtr->property); while (retrPtr->result == -1) { Tcl_DoOneEvent(0); } Tk_DeleteEventHandler(tkwin, PropertyChangeMask, SelRcvIncrProc, (ClientData) retrPtr); } else { Tcl_DString ds; if (format != 32 && format != 8) { char buf[64 + TCL_INTEGER_SPACE]; sprintf(buf, "bad format for selection: wanted \"32\" or " "\"8\", got \"%d\"", format); Tcl_SetResult(retrPtr->interp, buf, TCL_VOLATILE); retrPtr->result = TCL_ERROR; return; } Tcl_DStringInit(&ds); if (format == 32) { SelCvtFromX32((long *) propInfo, (int) numItems, type, (Tk_Window) winPtr, &ds); } else { SelCvtFromX8((char *) propInfo, (int) numItems, type, (Tk_Window) winPtr, &ds); } interp = retrPtr->interp; Tcl_Preserve((ClientData) interp); retrPtr->result = (*retrPtr->proc)(retrPtr->clientData, interp, Tcl_DStringValue(&ds)); Tcl_Release((ClientData) interp); Tcl_DStringFree(&ds); } XFree(propInfo); return; } /* * Case #3: SelectionRequest events. Call ConvertSelection to do the dirty * work. */ if (eventPtr->type == SelectionRequest) { ConvertSelection(winPtr, &eventPtr->xselectionrequest); return; } } /* *---------------------------------------------------------------------- * * SelTimeoutProc -- * * This function is invoked once every second while waiting for the * selection to be returned. After a while it gives up and aborts the * selection retrieval. * * Results: * None. * * Side effects: * A new timer callback is created to call us again in another second, * unless time has expired, in which case an error is recorded for the * retrieval. * *---------------------------------------------------------------------- */ static void SelTimeoutProc( ClientData clientData) /* Information about retrieval in progress. */ { register TkSelRetrievalInfo *retrPtr = (TkSelRetrievalInfo *) clientData; /* * Make sure that the retrieval is still in progress. Then see how long * it's been since any sort of response was received from the other side. */ if (retrPtr->result != -1) { return; } retrPtr->idleTime++; if (retrPtr->idleTime >= 5) { /* * Use a careful function to store the error message, because the * result could already be partially filled in with a partial * selection return. */ Tcl_SetResult(retrPtr->interp, "selection owner didn't respond", TCL_STATIC); retrPtr->result = TCL_ERROR; } else { retrPtr->timeout = Tcl_CreateTimerHandler(1000, SelTimeoutProc, (ClientData) retrPtr); } } /* *---------------------------------------------------------------------- * * ConvertSelection -- * * This function is invoked to handle SelectionRequest events. It * responds to the requests, obeying the ICCCM protocols. * * Results: * None. * * Side effects: * Properties are created for the selection requestor, and a * SelectionNotify event is generated for the selection requestor. In the * event of long selections, this function implements INCR-mode * transfers, using the ICCCM protocol. * *---------------------------------------------------------------------- */ static void ConvertSelection( TkWindow *winPtr, /* Window that received the conversion * request; may not be selection's current * owner, be we set it to the current * owner. */ register XSelectionRequestEvent *eventPtr) /* Event describing request. */ { XSelectionEvent reply; /* Used to notify requestor that selection * info is ready. */ int multiple; /* Non-zero means a MULTIPLE request is being * handled. */ IncrInfo incr; /* State of selection conversion. */ Atom singleInfo[2]; /* incr.multAtoms points here except for * multiple conversions. */ unsigned long i; Tk_ErrorHandler errorHandler; TkSelectionInfo *infoPtr; TkSelInProgress ip; ThreadSpecificData *tsdPtr = (ThreadSpecificData *) Tcl_GetThreadData(&dataKey, sizeof(ThreadSpecificData)); errorHandler = Tk_CreateErrorHandler(eventPtr->display, -1, -1,-1, (int (*)()) NULL, NULL); /* * Initialize the reply event. */ reply.type = SelectionNotify; reply.serial = 0; reply.send_event = True; reply.display = eventPtr->display; reply.requestor = eventPtr->requestor; reply.selection = eventPtr->selection; reply.target = eventPtr->target; reply.property = eventPtr->property; if (reply.property == None) { reply.property = reply.target; } reply.time = eventPtr->time; for (infoPtr = winPtr->dispPtr->selectionInfoPtr; infoPtr != NULL; infoPtr = infoPtr->nextPtr) { if (infoPtr->selection == eventPtr->selection) { break; } } if (infoPtr == NULL) { goto refuse; } winPtr = (TkWindow *) infoPtr->owner; /* * Figure out which kind(s) of conversion to perform. If handling a * MULTIPLE conversion, then read the property describing which * conversions to perform. */ incr.winPtr = winPtr; incr.selection = eventPtr->selection; if (eventPtr->target != winPtr->dispPtr->multipleAtom) { multiple = 0; singleInfo[0] = reply.target; singleInfo[1] = reply.property; incr.multAtoms = singleInfo; incr.numConversions = 1; } else { Atom type, **multAtomsPtr = &incr.multAtoms; int format, result; unsigned long bytesAfter; multiple = 1; incr.multAtoms = NULL; if (eventPtr->property == None) { goto refuse; } result = XGetWindowProperty(eventPtr->display, eventPtr->requestor, eventPtr->property, 0, MAX_PROP_WORDS, False, XA_ATOM, &type, &format, &incr.numConversions, &bytesAfter, (unsigned char **) multAtomsPtr); if ((result != Success) || (bytesAfter != 0) || (format != 32) || (type == None)) { if (incr.multAtoms != NULL) { XFree((char *) incr.multAtoms); } goto refuse; } incr.numConversions /= 2; /* Two atoms per conversion. */ } /* * Loop through all of the requested conversions, and either return the * entire converted selection, if it can be returned in a single bunch, or * return INCR information only (the actual selection will be returned * below). */ incr.converts = (ConvertInfo *) ckalloc((unsigned) incr.numConversions * sizeof(ConvertInfo)); incr.numIncrs = 0; for (i = 0; i < incr.numConversions; i++) { Atom target, property, type; long buffer[TK_SEL_WORDS_AT_ONCE]; register TkSelHandler *selPtr; int numItems, format; char *propPtr; target = incr.multAtoms[2*i]; property = incr.multAtoms[2*i + 1]; incr.converts[i].offset = -1; incr.converts[i].buffer[0] = '\0'; for (selPtr = winPtr->selHandlerList; selPtr != NULL; selPtr = selPtr->nextPtr) { if ((selPtr->target == target) && (selPtr->selection == eventPtr->selection)) { break; } } if (selPtr == NULL) { /* * Nobody seems to know about this kind of request. If it's of a * sort that we can handle without any help, do it. Otherwise mark * the request as an errror. */ numItems = TkSelDefaultSelection(infoPtr, target, (char *) buffer, TK_SEL_BYTES_AT_ONCE, &type); if (numItems < 0) { incr.multAtoms[2*i + 1] = None; continue; } } else { ip.selPtr = selPtr; ip.nextPtr = TkSelGetInProgress(); TkSelSetInProgress(&ip); type = selPtr->format; numItems = (*selPtr->proc)(selPtr->clientData, 0, (char *) buffer, TK_SEL_BYTES_AT_ONCE); TkSelSetInProgress(ip.nextPtr); if ((ip.selPtr == NULL) || (numItems < 0)) { incr.multAtoms[2*i + 1] = None; continue; } if (numItems > TK_SEL_BYTES_AT_ONCE) { Tcl_Panic("selection handler returned too many bytes"); } ((char *) buffer)[numItems] = '\0'; } /* * Got the selection; store it back on the requestor's property. */ if (numItems == TK_SEL_BYTES_AT_ONCE) { /* * Selection is too big to send at once; start an INCR-mode * transfer. */ incr.numIncrs++; type = winPtr->dispPtr->incrAtom; buffer[0] = SelectionSize(selPtr); if (buffer[0] == 0) { incr.multAtoms[2*i + 1] = None; continue; } numItems = 1; propPtr = (char *) buffer; format = 32; incr.converts[i].offset = 0; XChangeProperty(reply.display, reply.requestor, property, type, format, PropModeReplace, (unsigned char *) propPtr, numItems); } else if (type == winPtr->dispPtr->utf8Atom) { /* * This matches selection requests of type UTF8_STRING, which * allows us to pass our utf-8 information untouched. */ XChangeProperty(reply.display, reply.requestor, property, type, 8, PropModeReplace, (unsigned char *) buffer, numItems); } else if ((type == XA_STRING) || (type == winPtr->dispPtr->compoundTextAtom)) { Tcl_DString ds; Tcl_Encoding encoding; /* * STRING is Latin-1, COMPOUND_TEXT is an iso2022 variant. We need * to convert the selection text into these external forms before * modifying the property. */ if (type == XA_STRING) { encoding = Tcl_GetEncoding(NULL, "iso8859-1"); } else { encoding = Tcl_GetEncoding(NULL, "iso2022"); } Tcl_UtfToExternalDString(encoding, (char *) buffer, -1, &ds); XChangeProperty(reply.display, reply.requestor, property, type, 8, PropModeReplace, (unsigned char *) Tcl_DStringValue(&ds), Tcl_DStringLength(&ds)); if (encoding) { Tcl_FreeEncoding(encoding); } Tcl_DStringFree(&ds); } else { propPtr = (char *) SelCvtToX((char *) buffer, type, (Tk_Window) winPtr, &numItems); if (propPtr == NULL) { goto refuse; } format = 32; XChangeProperty(reply.display, reply.requestor, property, type, format, PropModeReplace, (unsigned char *) propPtr, numItems); ckfree(propPtr); } } /* * Send an event back to the requestor to indicate that the first stage of * conversion is complete (everything is done except for long conversions * that have to be done in INCR mode). */ if (incr.numIncrs > 0) { XSelectInput(reply.display, reply.requestor, PropertyChangeMask); incr.timeout = Tcl_CreateTimerHandler(1000, IncrTimeoutProc, (ClientData) &incr); incr.idleTime = 0; incr.reqWindow = reply.requestor; incr.time = infoPtr->time; incr.nextPtr = tsdPtr->pendingIncrs; tsdPtr->pendingIncrs = &incr; } if (multiple) { XChangeProperty(reply.display, reply.requestor, reply.property, XA_ATOM, 32, PropModeReplace, (unsigned char *) incr.multAtoms, (int) incr.numConversions*2); } else { /* * Not a MULTIPLE request. The first property in "multAtoms" got set * to None if there was an error in conversion. */ reply.property = incr.multAtoms[1]; } XSendEvent(reply.display, reply.requestor, False, 0, (XEvent *) &reply); Tk_DeleteErrorHandler(errorHandler); /* * Handle any remaining INCR-mode transfers. This all happens in callbacks * to TkSelPropProc, so just wait until the number of uncompleted INCR * transfers drops to zero. */ if (incr.numIncrs > 0) { IncrInfo *incrPtr2; while (incr.numIncrs > 0) { Tcl_DoOneEvent(0); } Tcl_DeleteTimerHandler(incr.timeout); errorHandler = Tk_CreateErrorHandler(winPtr->display, -1, -1,-1, (int (*)()) NULL, NULL); XSelectInput(reply.display, reply.requestor, 0L); Tk_DeleteErrorHandler(errorHandler); if (tsdPtr->pendingIncrs == &incr) { tsdPtr->pendingIncrs = incr.nextPtr; } else { for (incrPtr2 = tsdPtr->pendingIncrs; incrPtr2 != NULL; incrPtr2 = incrPtr2->nextPtr) { if (incrPtr2->nextPtr == &incr) { incrPtr2->nextPtr = incr.nextPtr; break; } } } } /* * All done. Cleanup and return. */ ckfree((char *) incr.converts); if (multiple) { XFree((char *) incr.multAtoms); } return; /* * An error occurred. Send back a refusal message. */ refuse: reply.property = None; XSendEvent(reply.display, reply.requestor, False, 0, (XEvent *) &reply); Tk_DeleteErrorHandler(errorHandler); return; } /* *---------------------------------------------------------------------- * * SelRcvIncrProc -- * * This function handles the INCR protocol on the receiving side. It is * invoked in response to property changes on the requestor's window * (which hopefully are because a new chunk of the selection arrived). * * Results: * None. * * Side effects: * If a new piece of selection has arrived, a function is invoked to deal * with that piece. When the whole selection is here, a flag is left for * the higher-level function that initiated the selection retrieval. * *---------------------------------------------------------------------- */ static void SelRcvIncrProc( ClientData clientData, /* Information about retrieval. */ register XEvent *eventPtr) /* X PropertyChange event. */ { register TkSelRetrievalInfo *retrPtr = (TkSelRetrievalInfo *) clientData; char *propInfo, **propInfoPtr = &propInfo; Atom type; int format, result; unsigned long numItems, bytesAfter; Tcl_Interp *interp; if ((eventPtr->xproperty.atom != retrPtr->property) || (eventPtr->xproperty.state != PropertyNewValue) || (retrPtr->result != -1)) { return; } propInfo = NULL; result = XGetWindowProperty(eventPtr->xproperty.display, eventPtr->xproperty.window, retrPtr->property, 0, MAX_PROP_WORDS, True, (Atom) AnyPropertyType, &type, &format, &numItems, &bytesAfter, (unsigned char **) propInfoPtr); if ((result != Success) || (type == None)) { return; } if (bytesAfter != 0) { Tcl_SetResult(retrPtr->interp, "selection property too large", TCL_STATIC); retrPtr->result = TCL_ERROR; goto done; } if ((type == XA_STRING) || (type == retrPtr->winPtr->dispPtr->textAtom) || (type == retrPtr->winPtr->dispPtr->utf8Atom) || (type == retrPtr->winPtr->dispPtr->compoundTextAtom)) { char *dst, *src; int srcLen, dstLen, srcRead, dstWrote, soFar; Tcl_Encoding encoding; Tcl_DString *dstPtr, temp; if (format != 8) { char buf[64 + TCL_INTEGER_SPACE]; sprintf(buf, "bad format for string selection: wanted \"8\", got \"%d\"", format); Tcl_SetResult(retrPtr->interp, buf, TCL_VOLATILE); retrPtr->result = TCL_ERROR; goto done; } interp = retrPtr->interp; Tcl_Preserve((ClientData) interp); if (type == retrPtr->winPtr->dispPtr->compoundTextAtom) { encoding = Tcl_GetEncoding(NULL, "iso2022"); } else if (type == retrPtr->winPtr->dispPtr->utf8Atom) { encoding = Tcl_GetEncoding(NULL, "utf-8"); } else { encoding = Tcl_GetEncoding(NULL, "iso8859-1"); } /* * Check to see if there is any data left over from the previous * chunk. If there is, copy the old data and the new data into a new * buffer. */ Tcl_DStringInit(&temp); if (Tcl_DStringLength(&retrPtr->buf) > 0) { Tcl_DStringAppend(&temp, Tcl_DStringValue(&retrPtr->buf), Tcl_DStringLength(&retrPtr->buf)); if (numItems > 0) { Tcl_DStringAppend(&temp, propInfo, (int)numItems); } src = Tcl_DStringValue(&temp); srcLen = Tcl_DStringLength(&temp); } else if (numItems == 0) { /* * There is no new data, so we're done. */ retrPtr->result = TCL_OK; Tcl_Release((ClientData) interp); goto done; } else { src = propInfo; srcLen = numItems; } /* * Set up the destination buffer so we can use as much space as is * available. */ dstPtr = &retrPtr->buf; dst = Tcl_DStringValue(dstPtr); dstLen = dstPtr->spaceAvl - 1; /* * Now convert the data, growing the destination buffer as needed. */ while (1) { result = Tcl_ExternalToUtf(NULL, encoding, src, srcLen, retrPtr->encFlags, &retrPtr->encState, dst, dstLen, &srcRead, &dstWrote, NULL); soFar = dst + dstWrote - Tcl_DStringValue(dstPtr); retrPtr->encFlags &= ~TCL_ENCODING_START; src += srcRead; srcLen -= srcRead; if (result != TCL_CONVERT_NOSPACE) { Tcl_DStringSetLength(dstPtr, soFar); break; } if (Tcl_DStringLength(dstPtr) == 0) { Tcl_DStringSetLength(dstPtr, dstLen); } Tcl_DStringSetLength(dstPtr, 2 * Tcl_DStringLength(dstPtr) + 1); dst = Tcl_DStringValue(dstPtr) + soFar; dstLen = Tcl_DStringLength(dstPtr) - soFar - 1; } Tcl_DStringSetLength(dstPtr, soFar); result = (*retrPtr->proc)(retrPtr->clientData, interp, Tcl_DStringValue(dstPtr)); Tcl_Release((ClientData) interp); /* * Copy any unused data into the destination buffer so we can pick it * up next time around. */ Tcl_DStringSetLength(dstPtr, 0); Tcl_DStringAppend(dstPtr, src, srcLen); Tcl_DStringFree(&temp); if (encoding) { Tcl_FreeEncoding(encoding); } if (result != TCL_OK) { retrPtr->result = result; } } else if (numItems == 0) { retrPtr->result = TCL_OK; } else { Tcl_DString ds; if (format != 32 && format != 8) { char buf[64 + TCL_INTEGER_SPACE]; sprintf(buf, "bad format for selection: wanted \"32\" or " "\"8\", got \"%d\"", format); Tcl_SetResult(retrPtr->interp, buf, TCL_VOLATILE); retrPtr->result = TCL_ERROR; goto done; } Tcl_DStringInit(&ds); if (format == 32) { SelCvtFromX32((long *) propInfo, (int) numItems, type, (Tk_Window) retrPtr->winPtr, &ds); } else { SelCvtFromX8((char *) propInfo, (int) numItems, type, (Tk_Window) retrPtr->winPtr, &ds); } interp = retrPtr->interp; Tcl_Preserve((ClientData) interp); result = (*retrPtr->proc)(retrPtr->clientData, interp, Tcl_DStringValue(&ds)); Tcl_Release((ClientData) interp); Tcl_DStringFree(&ds); if (result != TCL_OK) { retrPtr->result = result; } } done: XFree(propInfo); retrPtr->idleTime = 0; } /* *---------------------------------------------------------------------- * * SelectionSize -- * * This function is called when the selection is too large to send in a * single buffer; it computes the total length of the selection in bytes. * * Results: * The return value is the number of bytes in the selection given by * selPtr. * * Side effects: * The selection is retrieved from its current owner (this is the only * way to compute its size). * *---------------------------------------------------------------------- */ static int SelectionSize( TkSelHandler *selPtr) /* Information about how to retrieve the * selection whose size is wanted. */ { char buffer[TK_SEL_BYTES_AT_ONCE+1]; int size, chunkSize; TkSelInProgress ip; size = TK_SEL_BYTES_AT_ONCE; ip.selPtr = selPtr; ip.nextPtr = TkSelGetInProgress(); TkSelSetInProgress(&ip); do { chunkSize = (*selPtr->proc)(selPtr->clientData, size, (char *) buffer, TK_SEL_BYTES_AT_ONCE); if (ip.selPtr == NULL) { size = 0; break; } size += chunkSize; } while (chunkSize == TK_SEL_BYTES_AT_ONCE); TkSelSetInProgress(ip.nextPtr); return size; } /* *---------------------------------------------------------------------- * * IncrTimeoutProc -- * * This function is invoked once a second while sending the selection to * a requestor in INCR mode. After a while it gives up and aborts the * selection operation. * * Results: * None. * * Side effects: * A new timeout gets registered so that this function gets called again * in another second, unless too many seconds have elapsed, in which case * incrPtr is marked as "all done". * *---------------------------------------------------------------------- */ static void IncrTimeoutProc( ClientData clientData) /* Information about INCR-mode selection * retrieval for which we are selection * owner. */ { register IncrInfo *incrPtr = (IncrInfo *) clientData; incrPtr->idleTime++; if (incrPtr->idleTime >= 5) { incrPtr->numIncrs = 0; } else { incrPtr->timeout = Tcl_CreateTimerHandler(1000, IncrTimeoutProc, (ClientData) incrPtr); } } /* *---------------------------------------------------------------------- * * SelCvtToX -- * * Given a selection represented as a string (the normal Tcl form), * convert it to the ICCCM-mandated format for X, depending on the type * argument. This function and SelCvtFromX are inverses. * * Results: * The return value is a malloc'ed buffer holding a value equivalent to * "string", but formatted as for "type". It is the caller's * responsibility to free the string when done with it. The word at * *numLongsPtr is filled in with the number of 32-bit words returned in * the result. If NULL is returned, the input list was not actually a * list. * * Side effects: * None. * *---------------------------------------------------------------------- */ static long * SelCvtToX( char *string, /* String representation of selection. */ Atom type, /* Atom specifying the X format that is * desired for the selection. Should not be * XA_STRING (if so, don't bother calling this * function at all). */ Tk_Window tkwin, /* Window that governs atom conversion. */ int *numLongsPtr) /* Number of 32-bit words contained in the * result. */ { const char **field; int numFields, i; long *propPtr; /* * The string is assumed to consist of fields separated by spaces. The * property gets generated by converting each field to an integer number, * in one of two ways: * 1. If type is XA_ATOM, convert each field to its corresponding atom. * 2. If type is anything else, convert each field from an ASCII number to * a 32-bit binary number. */ if (Tcl_SplitList(NULL, string, &numFields, &field) != TCL_OK) { return NULL; } propPtr = (long *) ckalloc((unsigned) numFields*sizeof(long)); /* * Convert the fields one-by-one. */ for (i=0 ; i 0; propPtr++, numValues--) { if (type == XA_ATOM) { Tcl_DStringAppendElement(dsPtr, Tk_GetAtomName(tkwin, (Atom) *propPtr)); } else { char buf[12]; sprintf(buf, "0x%x", (unsigned int) *propPtr); Tcl_DStringAppendElement(dsPtr, buf); } } Tcl_DStringAppend(dsPtr, " ", 1); } static void SelCvtFromX8( register char *propPtr, /* Property value from X. */ int numValues, /* Number of 8-bit values in property. */ Atom type, /* Type of property Should not be XA_STRING * (if so, don't bother calling this function * at all). */ Tk_Window tkwin, /* Window to use for atom conversion. */ Tcl_DString *dsPtr) /* Where to store the converted string. */ { /* * Convert each long in the property to a string value, which is a * hexadecimal string. We build the list in a Tcl_DString because this is * easier than trying to get the quoting correct ourselves. */ for ( ; numValues > 0; propPtr++, numValues--) { char buf[12]; sprintf(buf, "0x%x", (unsigned char) *propPtr); Tcl_DStringAppendElement(dsPtr, buf); } Tcl_DStringAppend(dsPtr, " ", 1); } /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */