# This file is a Makefile for Tk.  If it has the name "Makefile.in"
# then it is a template for a Makefile;  to generate the actual Makefile,
# run "./configure", which is a configuration script generated by the
# "autoconf" program (constructs like "@foo@" will get replaced in the
# actual Makefile.
#
# RCS: @(#) $Id: Makefile.in,v 1.13 1999/11/23 21:24:59 wart Exp $

TCLVERSION = @TCL_VERSION@
VERSION = @TK_VERSION@

#----------------------------------------------------------------
# Things you can change to personalize the Makefile for your own
# site (you can make these changes in either Makefile.in or
# Makefile, but changes to Makefile will get lost if you re-run
# the configuration script).
#----------------------------------------------------------------

# Default top-level directories in which to install architecture-
# specific files (exec_prefix) and machine-independent files such
# as scripts (prefix).  The values specified here may be overridden
# at configure-time with the --exec-prefix and --prefix options
# to the "configure" script.

prefix		= @prefix@
exec_prefix	= @exec_prefix@

# The following definition can be set to non-null for special systems
# like AFS with replication.  It allows the pathnames used for installation
# to be different than those used for actually reference files at
# run-time.  INSTALL_ROOT is prepended to $prefix and $exec_prefix
# when installing files.
INSTALL_ROOT	=

# Directory from which applications will reference the library of Tk
# scripts (note: you can set the TK_LIBRARY environment variable at
# run-time to override this value):
TK_LIBRARY	= $(prefix)/lib/tk$(VERSION)

# Path to use at runtime to refer to LIB_INSTALL_DIR:
LIB_RUNTIME_DIR = $(exec_prefix)/lib

# Directory in which to install the program wish:
BIN_INSTALL_DIR = $(INSTALL_ROOT)$(exec_prefix)/bin

# Directory in which to install libtk.so or libtk.a:
LIB_INSTALL_DIR = $(INSTALL_ROOT)$(exec_prefix)/lib

# Path name to use when installing library scripts:
SCRIPT_INSTALL_DIR = $(INSTALL_ROOT)$(TK_LIBRARY)

# Directory in which to install the include file tk.h:
INCLUDE_INSTALL_DIR = $(INSTALL_ROOT)$(prefix)/include

# Top-level directory in which to install manual entries:
MAN_INSTALL_DIR = $(INSTALL_ROOT)$(prefix)/man

# Directory in which to install manual entry for wish:
MAN1_INSTALL_DIR = $(MAN_INSTALL_DIR)/man1

# Directory in which to install manual entries for Tk's C library
# procedures:
MAN3_INSTALL_DIR = $(MAN_INSTALL_DIR)/man3

# Directory in which to install manual entries for the built-in
# Tk commands:
MANN_INSTALL_DIR = $(MAN_INSTALL_DIR)/mann

# Libraries built with optimization switches have this additional extension
TK_DBGX		= @TK_DBGX@

# The directory containing the Tcl source and header files.
TCL_SRC_DIR	= @TCL_SRC_DIR@

# The directory containing the Tcl library archive file appropriate
# for this version of Tk:
TCL_BIN_DIR	= @TCL_BIN_DIR@

# The directory containing the Tcl sources and headers appropriate
# for this version of Tk ("srcdir" will be replaced or has already
# been replaced by the configure script):
TCL_GENERIC_DIR	= @TCL_SRC_DIR@/../generic

# This is a switch passed to a Cygwin script that generates file
# names based on the platform.
PATHTYPE	= @PATHTYPE@

# The name of the Tcl library.
TCL_LIB_FILE	  = "$(shell cygpath $(PATHTYPE) '@TCL_BIN_DIR@/@TCL_LIB_FILE@')"
TCL_STUB_LIB_FILE = "$(shell cygpath $(PATHTYPE) '@TCL_BIN_DIR@/@TCL_STUB_LIB_FILE@')"

SRC_DIR			= @srcdir@
ROOT_DIR		= $(SRC_DIR)/..
WIN_DIR			= $(SRC_DIR)
UNIX_DIR		= $(SRC_DIR)/../unix
GENERIC_DIR		= $(SRC_DIR)/../generic
BITMAP_DIR		= $(ROOT_DIR)/bitmaps
XLIB_DIR		= $(ROOT_DIR)/xlib
RC_DIR			= $(WIN_DIR)/rc

ROOT_DIR_NATIVE	   	= $(shell cygpath $(PATHTYPE) '$(ROOT_DIR)')
WIN_DIR_NATIVE	   	= $(shell cygpath $(PATHTYPE) '$(WIN_DIR)')
GENERIC_DIR_NATIVE 	= $(shell cygpath $(PATHTYPE) '$(GENERIC_DIR)')
BITMAP_DIR_NATIVE	= $(shell cygpath $(PATHTYPE) '$(ROOT_DIR)/bitmaps')
XLIB_DIR_NATIVE		= $(shell cygpath $(PATHTYPE) '$(ROOT_DIR)/xlib')
TCL_GENERIC_NATIVE	= $(shell cygpath $(PATHTYPE) '$(TCL_GENERIC_DIR)')
TCL_SRC_DIR_NATIVE      = $(shell cygpath $(PATHTYPE) '$(TCL_SRC_DIR)')
TCL_BIN_DIR_NATIVE      = $(shell cygpath $(PATHTYPE) '$(TCL_BIN_DIR)')

DLLSUFFIX		= @DLLSUFFIX@
LIBSUFFIX		= @LIBSUFFIX@
EXESUFFIX		= @EXESUFFIX@

TK_STUB_LIB_FILE	= @TK_STUB_LIB_FILE@
TK_LIB_FILE		= @TK_LIB_FILE@
TK_DLL_FILE		= @TK_DLL_FILE@

SHARED_LIBRARIES 	= $(TK_DLL_FILE) $(TK_STUB_LIB_FILE)
STATIC_LIBRARIES	= $(TK_LIB_FILE)

WISH			= wish$(VER)${EXESUFFIX}
TKTEST			= tktest${EXEEXT}
CAT32			= cat32

@SET_MAKE@

# Macro that expands to the first dependency argument with the appropriate
# path type already resolved.

DEPARG = "$(shell cygpath $(PATHTYPE) $<)"

# Setting the VPATH variable to a list of paths will cause the 
# makefile to look into these paths when resolving .c to .obj
# dependencies.

VPATH = $(GENERIC_DIR);$(WIN_DIR);$(UNIX_DIR);$(XLIB_DIR);$(RC_DIR)

# warning flags
CFLAGS_WARNING	= @CFLAGS_WARNING@

# The default switches for optimization or debugging
CFLAGS_DEBUG    = @CFLAGS_DEBUG@
CFLAGS_OPTIMIZE	= @CFLAGS_OPTIMIZE@

# The default switches for optimization or debugging
LDFLAGS_DEBUG    = @LDFLAGS_DEBUG@
LDFLAGS_OPTIMIZE = @LDFLAGS_OPTIMIZE@

# To change the compiler switches, for example to change from optimization to
# debugging symbols, change the following line:
#CFLAGS		= $(CFLAGS_DEBUG)
#CFLAGS		= $(CFLAGS_OPTIMIZE)
#CFLAGS		= $(CFLAGS_DEBUG) $(CFLAGS_OPTIMIZE)
CFLAGS		= @CFLAGS@

AR		= @AR@
CC		= @CC@
RC		= @RC@
AC_FLAGS	= @EXTRA_CFLAGS@ @DEFS@
CPPFLAGS	= @CPPFLAGS@
LDFLAGS		= @LDFLAGS@
LDFLAGS_CONSOLE	= @LDFLAGS_CONSOLE@
LDFLAGS_WINDOW	= @LDFLAGS_WINDOW@
EXEEXT		= @EXEEXT@
OBJEXT		= @OBJEXT@
SHLIB_LD	= @SHLIB_LD@
SHLIB_LD_LIBS	= @SHLIB_LD_LIBS@ $(TCL_STUB_LIB_FILE) gdi32.lib comdlg32.lib
SHLIB_CFLAGS	= @SHLIB_CFLAGS@
SHLIB_SUFFIX	= @SHLIB_SUFFIX@
VER		= @TK_MAJOR_VERSION@@TK_MINOR_VERSION@
DOTVER		= @TK_MAJOR_VERSION@.@TK_MINOR_VERSION@
LIBS		= @LIBS@ gdi32.lib comdlg32.lib
RMDIR		= rm -rf
MKDIR		= mkdir -p
SHELL		= @SHELL@
mkinstalldirs	= $(SHELL) $(top_srcdir)/mkinstalldirs
RM		= rm -f
COPY		= cp
CC_OBJNAME	= @CC_OBJNAME@
CC_EXENAME	= @CC_EXENAME@

CC_SWITCHES = ${CFLAGS} ${CFLAGS_WARNING} ${SHLIB_CFLAGS} \
-I"${GENERIC_DIR_NATIVE}" -I"${WIN_DIR_NATIVE}" \
-I"${XLIB_DIR_NATIVE}" -I"${BITMAP_DIR_NATIVE}" \
 -I"${TCL_GENERIC_NATIVE}" ${AC_FLAGS}

STUB_CC_SWITCHES = ${CC_SWITCHES} -DUSE_TCL_STUBS
CON_CC_SWITCHES = ${CC_SWITCHES} -DCONSOLE

# Tk used to let the configure script choose which program to use
# for installing, but there are just too many different versions of
# "install" around;  better to use the install-sh script that comes
# with the distribution, which is slower but guaranteed to work.

INSTALL		= cp
INSTALL_PROGRAM = ${INSTALL}
INSTALL_DATA	= ${INSTALL}

WISH_OBJS = \
	winMain.$(OBJEXT)

TCLTEST_OBJS = \
	${TCL_BIN_DIR}/tclThreadTest.$(OBJEXT)

TCLTEST_OBJS_NATIVE = \
	"${TCL_BIN_DIR_NATIVE}/tclThreadTest.$(OBJEXT)"

TKTEST_OBJS = \
	$(TCLTEST_OBJS) \
	testMain.$(OBJEXT) \
	tkSquare.$(OBJEXT) \
	tkTest.$(OBJEXT)

TKTEST_OBJS_NATIVE = \
	$(TCLTEST_OBJS_NATIVE) \
	testMain.$(OBJEXT) \
	tkSquare.$(OBJEXT) \
	tkTest.$(OBJEXT)

XLIB_OBJS = \
	xcolors.$(OBJEXT) \
	xdraw.$(OBJEXT) \
	xgc.$(OBJEXT) \
	ximage.$(OBJEXT) \
	xutil.$(OBJEXT)

TK_OBJS = \
	tkConsole.$(OBJEXT) \
	tkUnixMenubu.$(OBJEXT) \
	tkUnixScale.$(OBJEXT) \
	$(XLIB_OBJS) \
	tkWin3d.$(OBJEXT) \
	tkWin32Dll.$(OBJEXT) \
	tkWinButton.$(OBJEXT) \
	tkWinClipboard.$(OBJEXT) \
	tkWinColor.$(OBJEXT) \
	tkWinConfig.$(OBJEXT) \
	tkWinCursor.$(OBJEXT) \
	tkWinDialog.$(OBJEXT) \
	tkWinDraw.$(OBJEXT) \
	tkWinEmbed.$(OBJEXT) \
	tkWinFont.$(OBJEXT) \
	tkWinImage.$(OBJEXT) \
	tkWinInit.$(OBJEXT) \
	tkWinKey.$(OBJEXT) \
	tkWinMenu.$(OBJEXT) \
	tkWinPixmap.$(OBJEXT) \
	tkWinPointer.$(OBJEXT) \
	tkWinRegion.$(OBJEXT) \
	tkWinScrlbr.$(OBJEXT) \
	tkWinSend.$(OBJEXT) \
	tkWinTest.$(OBJEXT) \
	tkWinWindow.$(OBJEXT) \
	tkWinWm.$(OBJEXT) \
	tkWinX.$(OBJEXT) \
	stubs.$(OBJEXT) \
	tk3d.$(OBJEXT) \
	tkArgv.$(OBJEXT) \
	tkAtom.$(OBJEXT) \
	tkBind.$(OBJEXT) \
	tkBitmap.$(OBJEXT) \
	tkButton.$(OBJEXT) \
	tkCanvArc.$(OBJEXT) \
	tkCanvBmap.$(OBJEXT) \
	tkCanvImg.$(OBJEXT) \
	tkCanvLine.$(OBJEXT) \
	tkCanvPoly.$(OBJEXT) \
	tkCanvPs.$(OBJEXT) \
	tkCanvText.$(OBJEXT) \
	tkCanvUtil.$(OBJEXT) \
	tkCanvWind.$(OBJEXT) \
	tkCanvas.$(OBJEXT) \
	tkClipboard.$(OBJEXT) \
	tkCmds.$(OBJEXT) \
	tkColor.$(OBJEXT) \
	tkConfig.$(OBJEXT) \
	tkCursor.$(OBJEXT) \
	tkEntry.$(OBJEXT) \
	tkError.$(OBJEXT) \
	tkEvent.$(OBJEXT) \
	tkFileFilter.$(OBJEXT) \
	tkFocus.$(OBJEXT) \
	tkFont.$(OBJEXT) \
	tkFrame.$(OBJEXT) \
	tkGC.$(OBJEXT) \
	tkGeometry.$(OBJEXT) \
	tkGet.$(OBJEXT) \
	tkGrab.$(OBJEXT) \
	tkGrid.$(OBJEXT) \
	tkImage.$(OBJEXT) \
	tkImgBmap.$(OBJEXT) \
	tkImgGIF.$(OBJEXT) \
	tkImgPPM.$(OBJEXT) \
	tkImgPhoto.$(OBJEXT) \
	tkImgUtil.$(OBJEXT) \
	tkListbox.$(OBJEXT) \
	tkMacWinMenu.$(OBJEXT) \
	tkMain.$(OBJEXT) \
	tkMenu.$(OBJEXT) \
	tkMenubutton.$(OBJEXT) \
	tkMenuDraw.$(OBJEXT) \
	tkMessage.$(OBJEXT) \
	tkObj.$(OBJEXT) \
	tkOldConfig.$(OBJEXT) \
	tkOption.$(OBJEXT) \
	tkPack.$(OBJEXT) \
	tkPlace.$(OBJEXT) \
	tkPointer.$(OBJEXT) \
	tkRectOval.$(OBJEXT) \
	tkScale.$(OBJEXT) \
	tkScrollbar.$(OBJEXT) \
	tkSelect.$(OBJEXT) \
	tkText.$(OBJEXT) \
	tkTextBTree.$(OBJEXT) \
	tkTextDisp.$(OBJEXT) \
	tkTextImage.$(OBJEXT) \
	tkTextIndex.$(OBJEXT) \
	tkTextMark.$(OBJEXT) \
	tkTextTag.$(OBJEXT) \
	tkTextWind.$(OBJEXT) \
	tkTrig.$(OBJEXT) \
	tkUtil.$(OBJEXT) \
	tkVisual.$(OBJEXT) \
	tkStubInit.$(OBJEXT) \
	tkStubLib.$(OBJEXT) \
	tkWindow.$(OBJEXT)

STUB_OBJS = \
	tkStubLib.$(OBJEXT)

DEMOPROGS = browse hello ixset rmt rolodex square tcolor timer widget

# Main targets.  The default target -- all -- builds the binaries, 
# performs any post processing on libraries or documents.

all: binaries libraries doc

binaries: @LIBRARIES@ $(WISH)

libraries:

$(ROOT_DIR)/doc/man.macros:
	$(INSTALL_DATA) @TCL_SRC_DIR@/../doc/man.macros $(ROOT_DIR)/doc/man.macros

doc: $(ROOT_DIR)/doc/man.macros

test: binaries $(TKTEST)
	@TCL_LIBRARY="$(TCL_SRC_DIR_NATIVE)/../library"; export TCL_LIBRARY; \
	TK_LIBRARY="$(ROOT_DIR_NATIVE)/library"; export TK_LIBRARY; \
	PATH="$(PATH):$(TCL_BIN_DIR)"; export PATH; \
	./$(TKTEST) "$(ROOT_DIR_NATIVE)/tests/all.tcl" $(TESTFLAGS) \
	| ./$(CAT32)

runtest: tktest
	@TCL_LIBRARY="$(TCL_SRC_DIR_NATIVE)/../library"; export TCL_LIBRARY; \
	TK_LIBRARY="$(ROOT_DIR_NATIVE)/library"; export TK_LIBRARY; \
	PATH="$(PATH):$(TCL_BIN_DIR)"; export PATH; \
	./$(TKTEST) 

install: all install-binaries install-libraries install-doc install-demos

install-binaries:
	@for i in $(LIB_INSTALL_DIR) $(BIN_INSTALL_DIR) ; \
	    do \
	    echo "	$$i"; \
	    if [ ! -d $$i ] ; then \
		echo "Making directory $$i"; \
		$(mkinstalldirs) $$i; \
		chmod 755 $$i; \
		else true; \
		fi; \
	    done;
	@echo "Installing $(TK_LIB_FILE)"
	@$(INSTALL_DATA) $(TK_LIB_FILE) $(LIB_INSTALL_DIR)/$(TK_LIB_FILE)
	@echo "Installing $(WISH)"
	@$(INSTALL_PROGRAM) $(WISH) $(BIN_INSTALL_DIR)/$(WISH)
	@if test "$(DLLSUFFIX)" != "" ; then \
		echo "Installing $(TK_DLL_FILE)" ; \
		$(INSTALL_PROGRAM) $(TK_DLL_FILE) \
			$(BIN_INSTALL_DIR)/$(TK_DLL_FILE) ; \
	fi
	@if test "$(TK_STUB_LIB_FILE)" != "" ; then \
	    if [ -f $(TK_STUB_LIB_FILE) ]; then \
	        echo "Installing $(TK_STUB_LIB_FILE)"; \
	        $(INSTALL_DATA) $(TK_STUB_LIB_FILE) \
			 $(LIB_INSTALL_DIR)/$(TK_STUB_LIB_FILE); \
	    fi; \
        fi
	echo "Installing tkConfig.sh"
	$(INSTALL_DATA) tkConfig.sh $(LIB_INSTALL_DIR)/tkConfig.sh

install-libraries:
	@echo "Install Directories:"
	@for i in $(INSTALL_ROOT)$(prefix)/lib $(INCLUDE_INSTALL_DIR) \
		$(SCRIPT_INSTALL_DIR) $(SCRIPT_INSTALL_DIR)/images; \
	    do \
	    echo "	$$i"; \
	    if [ ! -d $$i ] ; then \
		echo "Making directory $$i"; \
		$(mkinstalldirs) $$i; \
		chmod 755 $$i; \
		else true; \
		fi; \
	    done;
	@for i in $(GENERIC_DIR)/tk.h $(GENERIC_DIR)/tkDecls.h ; \
	    do \
	    echo "Installing $$i"; \
	    $(INSTALL_DATA) $$i $(INCLUDE_INSTALL_DIR); \
	    done;
	@for i in $(ROOT_DIR)/library/*.tcl $(GENERIC_DIR)/prolog.ps \
	        $(ROOT_DIR)/library/tclIndex $(UNIX_DIR)/tkAppInit.c; \
	    do \
	    echo "Installing $$i"; \
	    $(INSTALL_DATA) $$i $(SCRIPT_INSTALL_DIR); \
	    done;
	@for i in $(ROOT_DIR)/library/images/*; \
	    do \
	    if [ -f $$i ] ; then \
		echo "Installing $$i"; \
		$(INSTALL_DATA) $$i $(SCRIPT_INSTALL_DIR)/images; \
	    fi; \
	    done;

install-demos:
	@echo "Install Directories:"
	@for i in $(INSTALL_ROOT)$(prefix)/lib $(SCRIPT_INSTALL_DIR) \
		$(SCRIPT_INSTALL_DIR)/demos \
		$(SCRIPT_INSTALL_DIR)/demos/images ; \
	    do \
	    echo "	$$i"; \
	    if [ ! -d $$i ] ; then \
		echo "Making directory $$i"; \
		$(mkinstalldirs) $$i; \
		chmod 755 $$i; \
		else true; \
		fi; \
	    done;
	@for i in $(ROOT_DIR)/library/demos/*; \
	    do \
	    if [ -f $$i ] ; then \
		echo "Installing $$i"; \
		sed -e '3 s|exec $(WISH)|exec $(WISH)|' \
			$$i > $(SCRIPT_INSTALL_DIR)/demos/`basename $$i`; \
	    fi; \
	    done;
	@for i in $(DEMOPROGS); \
	    do \
	    chmod 755 $(SCRIPT_INSTALL_DIR)/demos/$$i; \
	    done;
	@for i in $(ROOT_DIR)/library/demos/images/*; \
	    do \
	    if [ -f $$i ] ; then \
		echo "Installing $$i"; \
		$(INSTALL_DATA) $$i $(SCRIPT_INSTALL_DIR)/demos/images; \
		fi; \
	    done;

install-doc:


$(WISH): $(TK_LIB_FILE) $(WISH_OBJS) wish.res
	$(CC) $(CFLAGS) $(WISH_OBJS) $(TCL_LIB_FILE) $(TK_LIB_FILE) $(LIBS) \
	wish.res $(CC_EXENAME) -link $(LDFLAGS_WINDOW)

tktest : $(TKTEST)

$(TKTEST): $(TK_LIB_FILE) $(TKTEST_OBJS) wish.res $(CAT32)
	$(CC) $(CFLAGS) $(TKTEST_OBJS_NATIVE) $(TCL_LIB_FILE) \
	$(TK_LIB_FILE) $(LIBS) \
	wish.res $(CC_EXENAME) -link $(LDFLAGS_WINDOW)

$(CAT32): $(TCL_SRC_DIR)/cat.c
	$(CC) -c $(CC_SWITCHES) $(DEPARG) $(CC_OBJNAME)
	$(CC) $(CFLAGS) cat32.$(OBJEXT) $(CC_EXENAME) -link $(LDFLAGS_CONSOLE)

# The following targets are configured by autoconf to generate either
# a shared library or static library

${TK_STUB_LIB_FILE}: ${STUB_OBJS}
	@$(RM) ${TK_STUB_LIB_FILE}
	@MAKE_LIB@ ${STUB_OBJS}

${TK_DLL_FILE}: ${TK_OBJS} tk.res
	@$(RM) ${TK_DLL_FILE}
	@MAKE_DLL@ ${TK_OBJS} tk.res

${TK_LIB_FILE}: ${TK_OBJS}
	@$(RM) ${TK_LIB_FILE}
	@MAKE_LIB@ ${TK_OBJS}

# Special case object file targets

winMain.$(OBJEXT): winMain.c
	$(CC) -c $(CC_SWITCHES) $(DEPARG) $(CC_OBJNAME)

testMain.$(OBJEXT): winMain.c
	$(CC) -c $(CC_SWITCHES) $(DEPARG) -DTK_TEST $(CC_OBJNAME)

tkTest.$(OBJEXT): tkTest.c
	$(CC) -c $(CC_SWITCHES) $(DEPARG) $(CC_OBJNAME)

tkSquare.$(OBJEXT): tkSquare.c
	$(CC) -c $(CC_SWITCHES) $(DEPARG) $(CC_OBJNAME)

tclThreadTest.$(OBJEXT): $(TCL_BIN_DIR)/tclThreadTest.$(OBJEXT)

# Add the object extension to the implicit rules.  By default .obj is not
# automatically added.

.SUFFIXES: .${OBJEXT}
.SUFFIXES: .res
.SUFFIXES: .rc

# Implicit rule for all object files that will end up in the Tcl library

.c.${OBJEXT}:
	$(CC) -c $(STUB_CC_SWITCHES) -DBUILD_tk ${DEPARG} $(CC_OBJNAME)

.rc.res:
	$(RC) -fo $@ -r -i "$(GENERIC_DIR_NATIVE)" -i "$(TCL_GENERIC_NATIVE)" $(DEPARG)

depend:

clean:
	$(RM) *.lib *.exp *.dll *.${OBJEXT} *~ \#* TAGS a.out
	$(RM) $(WISH) $(TKTEST)
	$(RM) *.pch

distclean: clean
	$(RM) Makefile config.status config.cache config.log

Makefile: Makefile.in
	./config.status