#------------------------------------------------------------- -*- makefile -*-
# makefile.vc --
#
#	Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# Copyright (c) 1995-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-2000 Ajuba Solutions.
# Copyright (c) 2001-2005 ActiveState Corporation.
# Copyright (c) 2001-2004 David Gravereaux.
# Copyright (c) 2003-2008 Pat Thoyts.
#------------------------------------------------------------------------------

# Check to see we are configured to build with MSVC (MSDEVDIR, MSVCDIR or
# VCINSTALLDIR) or with the MS Platform SDK (MSSDK or WindowsSDKDir)
!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
MSG = ^
You need to run vcvars32.bat from Developer Studio or setenv.bat from the^
Platform SDK first to setup the environment.  Jump to this line to read^
the build instructions.
!error $(MSG)
!endif

#------------------------------------------------------------------------------
# HOW TO USE this makefile:
#
# 1)  It is now necessary to have MSVCDir, MSDevDir or MSSDK set in the
#     environment.  This is used as a check to see if vcvars32.bat had been
#     run prior to running nmake or during the installation of Microsoft
#     Visual C++, MSVCDir had been set globally and the PATH adjusted.
#     Either way is valid.
#
#     You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
#     directory to setup the proper environment, if needed, for your
#     current setup.  This is a needed bootstrap requirement and allows the
#     swapping of different environments to be easier.
#
# 2)  To use the Platform SDK (not expressly needed), run setenv.bat after
#     vcvars32.bat according to the instructions for it.  This can also
#     turn on the 64-bit compiler, if your SDK has it.
#
# 3)  Targets are:
#	release  -- Builds the core, the shell. (default)
#	core     -- Only builds the core.
#	all      -- Builds everything.
#	test     -- Builds and runs the test suite.
#	tktest   -- Just builds the binaries for the test suite.
#	install  -- Installs the built binaries and libraries to $(INSTALLDIR)
#		    as the root of the install tree.
#	cwish    -- Builds a console version of wish.
#	clean    -- Removes the contents of $(TMP_DIR)
#	hose     -- Removes the contents of $(TMP_DIR) and $(OUT_DIR)
#	genstubs -- Rebuilds the Stubs table and support files (dev only).
#	depend   -- Generates an accurate set of source dependancies for this
#		    makefile.  Helpful to avoid problems when the sources are
#		    refreshed and you rebuild, but can "overbuild" when common
#		    headers like tkInt.h just get small changes.
#	winhelp  -- builds the windows .hlp file for Tcl from the troff man
#		    files.
#
# 4)  Macros usable on the commandline:
#	TCLDIR=<path>
#		Sets the location for where to find the Tcl headers and
#		libraries.  The install point is assumed when not specified.
#		Tk does need the source directory, though.  Tk comes very close
#		to not needing the sources, but does, in fact, require them.
#
#	INSTALLDIR=<path>
#		Sets where to install Tcl from the built binaries.
#		C:\Progra~1\Tcl is assumed when not specified.
#
#	OPTS=loimpact,msvcrt,nothreads,noxp,pdbs,profile,square,static,staticpkg,symbols,unchecked,none
#		Sets special options for the core.  The default is for none.
#		Any combination of the above may be used (comma separated).
#		'none' will over-ride everything to nothing.
#
#		loimpact = Adds a flag for how NT treats the heap to keep memory
#			   in use, low.  This is said to impact alloc performance.
#		msvcrt  =  Affects the static option only to switch it from
#			   using libcmt(d) as the C runtime [by default] to
#			   msvcrt(d). This is useful for static embedding
#			   support.
#		nothreads = Turns off full multithreading support.
#		noxp     = If you do not have the uxtheme.h header then you
#                          cannot include support for XP themeing.
#		square   = Include the demo square widget.
#		static  =  Builds a static library of the core instead of a
#			   dll.  The shell will be static (and large), as well.
#		staticpkg = Affects the static option only to switch
#			   wishXX.exe to have the dde and reg extension linked
#			   inside it.
#		pdbs     = Build detached symbols for release builds.
#		profile  = Adds profiling hooks.  Map file is assumed.
#		thrdalloc = Use the thread allocator (shared global free pool)
#			   This is the default on threaded builds.
#		tclalloc = Use the old non-thread allocator
#		symbols  = Debug build. Links to the debug C runtime, disables
#			   optimizations and creates pdb symbols files.
#		unchecked = Allows a symbols build to not use the debug
#			   enabled runtime (msvcrt.dll not msvcrtd.dll
#			   or libcmt.lib not libcmtd.lib).
#
#	STATS=memdbg,compdbg,none
#		Sets optional memory and bytecode compiler debugging code added
#		to the core.  The default is for none.  Any combination of the
#		above may be used (comma separated).  'none' will over-ride
#		everything to nothing.
#
#		memdbg   = Enables the debugging memory allocator.
#		compdbg  = Enables byte compilation logging.
#
#	CHECKS=nodep,fullwarn,64bit,none
#		Sets special macros for checking compatability.
#
#		nodep	 = Turns off compatability macros to ensure Tk isn't
#			    being built with deprecated functions.
#		fullwarn = Builds with full compiler and link warnings enabled.
#			    Very verbose.
#		64bit    = Enable 64bit portability warnings (if available)
#
#	MACHINE=(ALPHA|AMD64|IA64|IX86)
#		Set the machine type used for the compiler, linker, and
#		resource compiler.  This hook is needed to tell the tools
#		when alternate platforms are requested.  IX86 is the default
#		when not specified.
#
#	TMP_DIR=<path>
#	OUT_DIR=<path>
#		Hooks to allow the intermediate and output directories to be
#		changed.  $(OUT_DIR) is assumed to be
#		$(BINROOT)\(Release|Debug) based on if symbols are requested.
#		$(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
#
#	TESTPAT=<file>
#		Reads the tests requested to be run from this file.
#
# 5)  Examples:
#
#	Basic syntax of calling nmake looks like this:
#	nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
#
#                        Standard (no frills)
#       c:\tk_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
#       Setting environment for using Microsoft Visual C++ tools.
#       c:\tk_src\win\>nmake -f makefile.vc release
#       c:\tk_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
#
#                         Building for Win64
#       c:\tk_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
#       Setting environment for using Microsoft Visual C++ tools.
#       c:\tk_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
#       Targeting Windows pre64 RETAIL
#       c:\tk_src\win\>nmake -f makefile.vc MACHINE=IA64
#
#------------------------------------------------------------------------------
#==============================================================================
###############################################################################


#    //==================================================================\\
#   >>[               -> Do not modify below this line. <-               ]<<
#   >>[  Please, use the commandline macros to modify how Tcl is built.  ]<<
#   >>[  If you need more features, send us a patch for more macros.     ]<<
#    \\==================================================================//


###############################################################################
#==============================================================================
#------------------------------------------------------------------------------

!if !exist("makefile.vc")
MSG = ^
You must run this makefile only from the directory it is in.^
Please `cd` to its location first.
!error $(MSG)
!endif

PROJECT	= tk
!include "rules.vc"

!if $(TCLINSTALL)
!message *** Warning: Tk requires the source distribution of Tcl to build from,
!message ***    at this time, sorry.  Please set the TCLDIR macro to point to the
!message ***    Tcl sources.
!endif

# Extra makefile options processing...
!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"]
HAVE_UXTHEME_H    = 1
TTK_SQUARE_WIDGET = 0
!else
!if [nmakehlp -f $(OPTS) "noxp"]
!message *** Exclude support for XP theme
HAVE_UXTHEME_H  = 0
!else
HAVE_UXTHEME_H  = 1
!endif
!if [nmakehlp -f "$(OPTS)" "square"]
!message *** Include ttk square demo widget
TTK_SQUARE_WIDGET   = 1
!else
TTK_SQUARE_WIDGET   = 0
!endif
!endif

STUBPREFIX = $(PROJECT)stub
WISHNAMEPREFIX = wish

BINROOT		= $(MAKEDIR)     # originally .
ROOT		= $(MAKEDIR)\..  # originally ..

TK_LIBRARY	= $(ROOT)\library

TKIMPLIB	= "$(OUT_DIR)\$(PROJECT)$(TK_VERSION)$(SUFX).lib"
TKLIBNAME	= $(PROJECT)$(TK_VERSION)$(SUFX).$(EXT)
TKLIB		= "$(OUT_DIR)\$(TKLIBNAME)"

TKSTUBLIBNAME	= $(STUBPREFIX)$(TK_VERSION).lib
TKSTUBLIB	= "$(OUT_DIR)\$(TKSTUBLIBNAME)"

WISH 		= "$(OUT_DIR)\$(WISHNAMEPREFIX)$(TK_VERSION)$(SUFX).exe"
WISHC 		= "$(OUT_DIR)\$(WISHNAMEPREFIX)c$(TK_VERSION)$(SUFX).exe"

TKTEST		= "$(OUT_DIR)\$(PROJECT)test.exe"
CAT32		= "$(OUT_DIR)\cat32.exe"

LIB_INSTALL_DIR		= $(_INSTALLDIR)\lib
BIN_INSTALL_DIR		= $(_INSTALLDIR)\bin
DOC_INSTALL_DIR		= $(_INSTALLDIR)\doc
SCRIPT_INSTALL_DIR	= $(_INSTALLDIR)\lib\$(PROJECT)$(TK_DOTVERSION)
INCLUDE_INSTALL_DIR	= $(_INSTALLDIR)\include

WISHOBJS = \
	$(TMP_DIR)\winMain.obj \
!if $(TCL_USE_STATIC_PACKAGES)
	$(TCLDDELIB) \
	$(TCLREGLIB) \
	$(TCLSTUBLIB) \
!endif
	$(TMP_DIR)\wish.res

TKTESTOBJS = \
	$(TMP_DIR)\testMain.obj \
	$(TMP_DIR)\tkSquare.obj \
	$(TMP_DIR)\tkTest.obj \
	$(TMP_DIR)\tkOldTest.obj \
	$(TMP_DIR)\tkWinTest.obj

XLIBOBJS = \
	$(TMP_DIR)\xcolors.obj \
	$(TMP_DIR)\xdraw.obj \
	$(TMP_DIR)\xgc.obj \
	$(TMP_DIR)\ximage.obj \
	$(TMP_DIR)\xutil.obj

TKOBJS = \
	$(TMP_DIR)\tkConsole.obj \
	$(TMP_DIR)\tkUnixMenubu.obj \
	$(TMP_DIR)\tkUnixScale.obj \
	$(XLIBOBJS) \
	$(TMP_DIR)\tkWin3d.obj \
	$(TMP_DIR)\tkWin32Dll.obj \
	$(TMP_DIR)\tkWinButton.obj \
	$(TMP_DIR)\tkWinClipboard.obj \
	$(TMP_DIR)\tkWinColor.obj \
	$(TMP_DIR)\tkWinConfig.obj \
	$(TMP_DIR)\tkWinCursor.obj \
	$(TMP_DIR)\tkWinDialog.obj \
	$(TMP_DIR)\tkWinDraw.obj \
	$(TMP_DIR)\tkWinEmbed.obj \
	$(TMP_DIR)\tkWinFont.obj \
	$(TMP_DIR)\tkWinImage.obj \
	$(TMP_DIR)\tkWinInit.obj \
	$(TMP_DIR)\tkWinKey.obj \
	$(TMP_DIR)\tkWinMenu.obj \
	$(TMP_DIR)\tkWinPixmap.obj \
	$(TMP_DIR)\tkWinPointer.obj \
	$(TMP_DIR)\tkWinRegion.obj \
	$(TMP_DIR)\tkWinScrlbr.obj \
	$(TMP_DIR)\tkWinSend.obj \
	$(TMP_DIR)\tkWinSendCom.obj \
	$(TMP_DIR)\tkWinWindow.obj \
	$(TMP_DIR)\tkWinWm.obj \
	$(TMP_DIR)\tkWinX.obj \
	$(TMP_DIR)\stubs.obj \
	$(TMP_DIR)\tk3d.obj \
	$(TMP_DIR)\tkArgv.obj \
	$(TMP_DIR)\tkAtom.obj \
	$(TMP_DIR)\tkBind.obj \
	$(TMP_DIR)\tkBitmap.obj \
	$(TMP_DIR)\tkBusy.obj \
	$(TMP_DIR)\tkButton.obj \
	$(TMP_DIR)\tkCanvArc.obj \
	$(TMP_DIR)\tkCanvBmap.obj \
	$(TMP_DIR)\tkCanvImg.obj \
	$(TMP_DIR)\tkCanvLine.obj \
	$(TMP_DIR)\tkCanvPoly.obj \
	$(TMP_DIR)\tkCanvPs.obj \
	$(TMP_DIR)\tkCanvText.obj \
	$(TMP_DIR)\tkCanvUtil.obj \
	$(TMP_DIR)\tkCanvWind.obj \
	$(TMP_DIR)\tkCanvas.obj \
	$(TMP_DIR)\tkClipboard.obj \
	$(TMP_DIR)\tkCmds.obj \
	$(TMP_DIR)\tkColor.obj \
	$(TMP_DIR)\tkConfig.obj \
	$(TMP_DIR)\tkCursor.obj \
	$(TMP_DIR)\tkEntry.obj \
	$(TMP_DIR)\tkError.obj \
	$(TMP_DIR)\tkEvent.obj \
	$(TMP_DIR)\tkFileFilter.obj \
	$(TMP_DIR)\tkFocus.obj \
	$(TMP_DIR)\tkFont.obj \
	$(TMP_DIR)\tkFrame.obj \
	$(TMP_DIR)\tkGC.obj \
	$(TMP_DIR)\tkGeometry.obj \
	$(TMP_DIR)\tkGet.obj \
	$(TMP_DIR)\tkGrab.obj \
	$(TMP_DIR)\tkGrid.obj \
	$(TMP_DIR)\tkImage.obj \
	$(TMP_DIR)\tkImgBmap.obj \
	$(TMP_DIR)\tkImgGIF.obj \
	$(TMP_DIR)\tkImgPNG.obj \
	$(TMP_DIR)\tkImgPPM.obj \
	$(TMP_DIR)\tkImgPhoto.obj \
	$(TMP_DIR)\tkImgPhInstance.obj \
	$(TMP_DIR)\tkImgUtil.obj \
	$(TMP_DIR)\tkListbox.obj \
	$(TMP_DIR)\tkMacWinMenu.obj \
	$(TMP_DIR)\tkMain.obj \
	$(TMP_DIR)\tkMain2.obj \
	$(TMP_DIR)\tkMenu.obj \
	$(TMP_DIR)\tkMenubutton.obj \
	$(TMP_DIR)\tkMenuDraw.obj \
	$(TMP_DIR)\tkMessage.obj \
	$(TMP_DIR)\tkPanedWindow.obj \
	$(TMP_DIR)\tkObj.obj \
	$(TMP_DIR)\tkOldConfig.obj \
	$(TMP_DIR)\tkOption.obj \
	$(TMP_DIR)\tkPack.obj \
	$(TMP_DIR)\tkPlace.obj \
	$(TMP_DIR)\tkPointer.obj \
	$(TMP_DIR)\tkRectOval.obj \
	$(TMP_DIR)\tkScale.obj \
	$(TMP_DIR)\tkScrollbar.obj \
	$(TMP_DIR)\tkSelect.obj \
	$(TMP_DIR)\tkStyle.obj \
	$(TMP_DIR)\tkText.obj \
	$(TMP_DIR)\tkTextBTree.obj \
	$(TMP_DIR)\tkTextDisp.obj \
	$(TMP_DIR)\tkTextImage.obj \
	$(TMP_DIR)\tkTextIndex.obj \
	$(TMP_DIR)\tkTextMark.obj \
	$(TMP_DIR)\tkTextTag.obj \
	$(TMP_DIR)\tkTextWind.obj \
	$(TMP_DIR)\tkTrig.obj \
	$(TMP_DIR)\tkUndo.obj \
	$(TMP_DIR)\tkUtil.obj \
	$(TMP_DIR)\tkVisual.obj \
	$(TMP_DIR)\tkStubInit.obj \
	$(TMP_DIR)\tkWindow.obj \
        $(TTK_OBJS) \
!if !$(STATIC_BUILD)
	$(TMP_DIR)\tk.res
!endif

TTK_OBJS = \
        $(TMP_DIR)\ttkWinMonitor.obj \
        $(TMP_DIR)\ttkWinTheme.obj \
        $(TMP_DIR)\ttkWinXPTheme.obj \
        $(TMP_DIR)\ttkBlink.obj \
        $(TMP_DIR)\ttkButton.obj \
        $(TMP_DIR)\ttkCache.obj \
        $(TMP_DIR)\ttkClamTheme.obj \
        $(TMP_DIR)\ttkClassicTheme.obj \
        $(TMP_DIR)\ttkDefaultTheme.obj \
        $(TMP_DIR)\ttkElements.obj \
        $(TMP_DIR)\ttkEntry.obj \
        $(TMP_DIR)\ttkFrame.obj \
        $(TMP_DIR)\ttkImage.obj \
        $(TMP_DIR)\ttkInit.obj \
        $(TMP_DIR)\ttkLabel.obj \
        $(TMP_DIR)\ttkLayout.obj \
        $(TMP_DIR)\ttkManager.obj \
        $(TMP_DIR)\ttkNotebook.obj \
        $(TMP_DIR)\ttkPanedwindow.obj \
        $(TMP_DIR)\ttkProgress.obj \
        $(TMP_DIR)\ttkScale.obj \
        $(TMP_DIR)\ttkScrollbar.obj \
        $(TMP_DIR)\ttkScroll.obj \
        $(TMP_DIR)\ttkSeparator.obj \
        $(TMP_DIR)\ttkSquare.obj \
        $(TMP_DIR)\ttkState.obj \
        $(TMP_DIR)\ttkTagSet.obj \
        $(TMP_DIR)\ttkTheme.obj \
        $(TMP_DIR)\ttkTrace.obj \
        $(TMP_DIR)\ttkTrack.obj \
        $(TMP_DIR)\ttkTreeview.obj \
        $(TMP_DIR)\ttkWidget.obj \
        $(TMP_DIR)\ttkStubInit.obj

TKSTUBOBJS = \
	$(TMP_DIR)\tkStubLib.obj $(TMP_DIR)\ttkStubLib.obj


WINDIR          = $(ROOT)\win
GENERICDIR	= $(ROOT)\generic
XLIBDIR		= $(ROOT)\xlib
TTKDIR		= $(ROOT)\generic\ttk
BITMAPDIR	= $(ROOT)\bitmaps
DOCDIR		= $(ROOT)\doc
RCDIR		= $(WINDIR)\rc

TK_INCLUDES	= -I"$(WINDIR)" -I"$(GENERICDIR)" -I"$(BITMAPDIR)" -I"$(XLIBDIR)" \
			$(TCL_INCLUDES)

CONFIG_DEFS     =-DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 \
		 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 \
		 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 \
		 -DSUPPORT_CONFIG_EMBEDDED \
!if $(HAVE_UXTHEME_H)
		 -DHAVE_UXTHEME_H=1 \
!endif
!if $(TTK_SQUARE_WIDGET)
		 -DTTK_SQUARE_WIDGET=1 \
!endif

TK_DEFINES	=-DBUILD_ttk $(OPTDEFINES)  $(CONFIG_DEFS) -Dinline=__inline

#---------------------------------------------------------------------
# Compile flags
#---------------------------------------------------------------------

!if !$(DEBUG)
!if $(OPTIMIZING)
### This cranks the optimization level to maximize speed
###  We can't use -O2 because sometimes it causes problems.
cdebug	= $(OPTIMIZATIONS)
!else
cdebug	=
!endif
!if $(SYMBOLS)
cdebug	= $(cdebug) -Zi
!endif
!else if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
### Warnings are too many, can't support warnings into errors.
cdebug	= -Zi -Od $(DEBUGFLAGS)
!else
cdebug	= -Zi -WX $(DEBUGFLAGS)
!endif

### Declarations common to all compiler options
cwarn = $(WARNINGS) -D _CRT_SECURE_NO_DEPRECATE -D _CRT_NONSTDC_NO_DEPRECATE
cflags = -nologo -c $(COMPILERFLAGS) $(cwarn) -Fp$(TMP_DIR)^\

!if $(MSVCRT)
!if $(DEBUG) && !$(UNCHECKED)
crt = -MDd
!else
crt = -MD
!endif
!else
!if $(DEBUG) && !$(UNCHECKED)
crt = -MTd
!else
crt = -MT
!endif
!endif

BASE_CFLAGS	= $(cdebug) $(cflags) $(crt) $(TK_INCLUDES)
TK_CFLAGS	= $(BASE_CFLAGS) $(TK_DEFINES)
CON_CFLAGS	= $(cdebug) $(cflags) $(crt) -DCONSOLE
WISH_CFLAGS	= $(BASE_CFLAGS) $(TK_DEFINES)
### Stubs files should not be compiled with -GL
STUB_CFLAGS     = $(cflags) $(cdebug:-GL=) $(TK_DEFINES)

!if !$(STATIC_BUILD)
TK_CFLAGS = $(TK_CFLAGS) -DUSE_TCL_STUBS
!endif

#---------------------------------------------------------------------
# Link flags
#---------------------------------------------------------------------

!if $(DEBUG)
ldebug	= -debug -debugtype:cv
!else
ldebug	= -release -opt:ref -opt:icf,3
!if $(SYMBOLS)
ldebug	= $(ldebug) -debug -debugtype:cv
!endif
!endif

### Declarations common to all linker options
lflags	= -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug)

!if $(PROFILE)
lflags	= $(lflags) -profile
!endif

!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
### Align sections for PE size savings.
lflags	= $(lflags) -opt:nowin98
!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
### Align sections for speed in loading by choosing the virtual page size.
lflags	= $(lflags) -align:4096
!endif

!if $(LOIMPACT)
lflags	= $(lflags) -ws:aggressive
!endif

dlllflags = $(lflags) -dll
conlflags = $(lflags) -subsystem:console
guilflags = $(lflags) -subsystem:windows

tcllibs    = $(TCLIMPLIB)
!if !$(STATIC_BUILD)
tcllibs    = $(TCLSTUBLIB) $(tcllibs)
!endif

baselibs   = netapi32.lib kernel32.lib user32.lib advapi32.lib ws2_32.lib
# Avoid 'unresolved external symbol __security_cookie' errors.
# c.f. http://support.microsoft.com/?id=894573
!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
!if $(VCVERSION) > 1399 && $(VCVERSION) < 1500
baselibs   = $(baselibs) bufferoverflowU.lib
!endif
!endif
guilibs	  = $(baselibs) gdi32.lib


#---------------------------------------------------------------------
# TkTest flags
#---------------------------------------------------------------------

!if "$(TESTPAT)" != ""
TESTFLAGS   = $(TESTFLAGS) -file $(TESTPAT)
!endif


#---------------------------------------------------------------------
# Project specific targets
#---------------------------------------------------------------------

release:  setup $(TKSTUBLIB) $(WISH)
all:	  release $(CAT32)
core:	  setup $(TKSTUBLIB) $(TKLIB)
cwish:	  $(WISHC)
install:  install-binaries install-libraries install-docs
tktest:	  setup $(TKTEST) $(CAT32)


test: test-classic test-ttk

test-classic: setup $(TKTEST) $(TKLIB) $(CAT32)
	@set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
	@set TK_LIBRARY=$(TK_LIBRARY:\=/)
	@set TCLLIBPATH=
!if $(TCLINSTALL)
	@set PATH=$(_TCLDIR)\bin;$(PATH)
!else
	@set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
!endif
!if "$(OS)" == "Windows_NT"  || "$(MSVCDIR)" == "IDE"
	$(DEBUGGER) $(TKTEST) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) | $(CAT32)
!else
	$(DEBUGGER) $(TKTEST) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) | $(CAT32)
!endif

test-ttk: setup $(TKTEST) $(TKLIB) $(CAT32)
	@set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
	@set TK_LIBRARY=$(TK_LIBRARY:\=/)
	@set TCLLIBPATH=
!if $(TCLINSTALL)
	@set PATH=$(_TCLDIR)\bin;$(PATH)
!else
	@set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
!endif
!if "$(OS)" == "Windows_NT"  || "$(MSVCDIR)" == "IDE"
	$(DEBUGGER) $(TKTEST) "$(ROOT)/tests/ttk/all.tcl" $(TESTFLAGS) | $(CAT32)
!else
	$(DEBUGGER) $(TKTEST) "$(ROOT)/tests/ttk/all.tcl" $(TESTFLAGS) | $(CAT32)
!endif

runtest: setup $(TKTEST) $(TKLIB) $(CAT32)
	@set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
	@set TK_LIBRARY=$(TK_LIBRARY:\=/)
	@set TCLLIBPATH=
!if $(TCLINSTALL)
	@set PATH=$(_TCLDIR)\bin;$(PATH)
!else
	@set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
!endif
	$(DEBUGGER) $(TKTEST)

rundemo: setup $(TKTEST) $(TKLIB) $(CAT32)
	@set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
	@set TK_LIBRARY=$(TK_LIBRARY:\=/)
	@set TCLLIBPATH=
!if $(TCLINSTALL)
	@set PATH=$(_TCLDIR)\bin;$(PATH)
!else
	@set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
!endif
	$(TKTEST) $(ROOT)\library\demos\widget

shell: setup $(WISH)
	@set TCL_LIBRARY=$(TCL_LIBRARY:\=/)
	@set TK_LIBRARY=$(TK_LIBRARY:\=/)
	@set TCLLIBPATH=
!if $(TCLINSTALL)
	@set PATH=$(_TCLDIR)\bin;$(PATH)
!else
	@set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH)
!endif
	$(DEBUGGER) $(WISH) <<
	console show
<<

setup:
	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)

!if !$(STATIC_BUILD)
$(TKIMPLIB): $(TKLIB)
!endif

$(TKLIB): $(TKOBJS)
!if $(STATIC_BUILD)
	$(lib32) -nologo -out:$@ @<<
$**
<<
!else
	$(link32) $(dlllflags) -base:@$(COFFBASE),tk -out:$@ $(guilibs) \
		$(TCLSTUBLIB) @<<
$**
<<
	$(_VC_MANIFEST_EMBED_DLL)
	-@del $*.exp
!endif


$(TKSTUBLIB): $(TKSTUBOBJS)
	$(lib32) -nologo -out:$@ $**


$(WISH): $(WISHOBJS) $(TKSTUBLIB) $(TKIMPLIB)
	$(link32) $(guilflags) -stack:2300000 -out:$@ $(guilibs) $(tcllibs) $**
	$(_VC_MANIFEST_EMBED_EXE)


$(WISHC): $(WISHOBJS) $(TKSTUBLIB) $(TKIMPLIB)
	$(link32) $(conlflags) -stack:2300000 -out:$@ $(guilibs) $(tcllibs) $**
	$(_VC_MANIFEST_EMBED_EXE)


$(TKTEST): $(TKTESTOBJS) $(TKSTUBLIB) $(TKIMPLIB)
	$(link32) $(guilflags) -stack:2300000 -out:$@ $(guilibs) $(tcllibs) $**
	$(_VC_MANIFEST_EMBED_EXE)


$(CAT32): $(_TCLDIR)\win\cat.c
	$(cc32) $(CON_CFLAGS) -Fo$(TMP_DIR)\ $?
	$(link32) $(conlflags) -out:$@ -stack:16384 $(TMP_DIR)\cat.obj $(baselibs)
	$(_VC_MANIFEST_EMBED_EXE)

#---------------------------------------------------------------------
# Regenerate the stubs files.  [Development use only]
#---------------------------------------------------------------------

genstubs:
!if !exist($(TCLSH))
	@echo Build tclsh first!
!else
	set TCL_LIBRARY=$(TCL_LIBRARY)
	$(TCLSH) $(_TCLDIR)\tools\genStubs.tcl $(GENERICDIR) \
		$(GENERICDIR)\$(PROJECT).decls $(GENERICDIR)\$(PROJECT)Int.decls
!endif


#---------------------------------------------------------------------
# Regenerate the windows help files.
#---------------------------------------------------------------------

HLPBASE		= $(PROJECT)$(TK_VERSION)
HELPFILE	= $(OUT_DIR)\$(HLPBASE).hlp
HELPCNT		= $(OUT_DIR)\$(HLPBASE).cnt
DOCTMP_DIR	= $(OUT_DIR)\$(PROJECT)_docs
HELPRTF		= $(DOCTMP_DIR)\$(PROJECT).rtf
MAN2HELP	= $(DOCTMP_DIR)\man2help.tcl
MAN2HELP2	= $(DOCTMP_DIR)\man2help2.tcl
INDEX		= $(DOCTMP_DIR)\index.tcl
BMP		= $(DOCTMP_DIR)\lamp.bmp
BMP_NOPATH	= lamp.bmp
MAN2TCL		= $(DOCTMP_DIR)\man2tcl.exe

winhelp: docsetup $(HELPFILE)

docsetup:
	@if not exist $(DOCTMP_DIR)\nul mkdir $(DOCTMP_DIR)

$(MAN2HELP) $(MAN2HELP2) $(INDEX): $(TCLTOOLSDIR)\$$(@F)
	$(CPY) $(TCLTOOLSDIR)\$(@F) $(@D)

$(BMP):
	$(CPY) $(WINDIR)\rc\$(@F) $(@D)

$(HELPFILE): $(HELPRTF) $(BMP)
	cd $(DOCTMP_DIR)
	start /wait hcrtf.exe -x <<$(PROJECT).hpj
[OPTIONS]
COMPRESS=12 Hall Zeck
LCID=0x409 0x0 0x0 ; English (United States)
TITLE=Tk Reference Manual
BMROOT=.
CNT=$(@B).cnt
HLP=$(@B).hlp

[FILES]
$(PROJECT).rtf

[WINDOWS]
main="Tcl/Tk Reference Manual",,27648,(r15263976),(r4227327)

[CONFIG]
BrowseButtons()
CreateButton(1, "Web", ExecFile("http://www.tcl.tk"))
CreateButton(2, "SF", ExecFile("http://sf.net/projects/tcl"))
CreateButton(3, "Wiki", ExecFile("http://wiki.tcl.tk"))
CreateButton(4, "FAQ", ExecFile("http://www.purl.org/NET/Tcl-FAQ/"))
<<
	cd $(MAKEDIR)
	@$(CPY) "$(DOCTMP_DIR)\$(@B).hlp" "$(OUT_DIR)"
	@$(CPY) "$(DOCTMP_DIR)\$(@B).cnt" "$(OUT_DIR)"

$(MAN2TCL): $(TCLTOOLSDIR)\$$(@B).c
	$(cc32) $(TK_CFLAGS) -Fo$(@D)\ $(TCLTOOLSDIR)\$(@B).c
	$(link32) $(conlflags) -out:$@ -stack:16384 $(@D)\man2tcl.obj
	$(_VC_MANIFEST_EMBED_EXE)

$(HELPRTF): $(MAN2TCL) $(MAN2HELP) $(MAN2HELP2) $(INDEX)
	$(TCLSH) $(MAN2HELP) -bitmap $(BMP_NOPATH) $(PROJECT) $(TK_VERSION) $(DOCDIR:\=/)

install-docs:
!if exist($(HELPFILE))
	$(CPY) "$(HELPFILE)" "$(DOC_INSTALL_DIR)\"
	$(CPY) "$(HELPCNT)" "$(DOC_INSTALL_DIR)\"
	$(TCLSH) <<
puts "Installing $(PROJECT)'s helpfile contents into Tcl's ..."
set f [open "$(DOC_INSTALL_DIR:\=/)/tcl$(TK_VERSION).cnt" r]
while {![eof $$f]} {
    if {[regexp {:Include $(PROJECT)([0-9]{2}).cnt} [gets $$f] dummy ver]} {
	if {$$ver == $(TK_VERSION)} {
	    puts "Already installed."
	    exit
	} else {
	    # do something here logical to remove (or replace) it.
	    puts "$$ver != $(TK_VERSION), unfinished code path, die, die!"
	    exit 1
	}
    }
}
close $$f
set f [open "$(DOC_INSTALL_DIR:\=/)/tcl$(TK_VERSION).cnt" a]
puts $$f {:Include $(HLPBASE).cnt}
close $$f
<<
	start /wait winhlp32 -g $(DOC_INSTALL_DIR)\tcl$(TK_VERSION).hlp
!endif

#---------------------------------------------------------------------
# Special case object file targets
#---------------------------------------------------------------------

$(TMP_DIR)\testMain.obj: $(WINDIR)\winMain.c
	$(cc32) $(WISH_CFLAGS) -DTK_TEST \
	    -DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \
	    -Fo$@ $?

$(TMP_DIR)\tkTest.obj: $(GENERICDIR)\tkTest.c
	$(cc32) $(WISH_CFLAGS) -Fo$@ $?

$(TMP_DIR)\tkOldTest.obj: $(GENERICDIR)\tkOldTest.c
	$(cc32) $(WISH_CFLAGS) -Fo$@ $?

$(TMP_DIR)\tkWinTest.obj: $(WINDIR)\tkWinTest.c
	$(cc32) $(WISH_CFLAGS) -Fo$@ $?

$(TMP_DIR)\tkSquare.obj: $(GENERICDIR)\tkSquare.c
	$(cc32) $(WISH_CFLAGS) -Fo$@ $?

$(TMP_DIR)\winMain.obj: $(WINDIR)\winMain.c
	$(cc32) $(WISH_CFLAGS) \
	    -DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \
	    -Fo$@ $?

$(TMP_DIR)\tkMain2.obj: $(GENERICDIR)\tkMain.c
	$(cc32) -DBUILD_tk $(TK_CFLAGS) -DTK_ASCII_MAIN -Fo$@ $?

# The following objects are part of the stub library and should not
# be built as DLL objects but none of the symbols should be exported
# and no reference made to a C runtime.

$(TMP_DIR)\tkStubLib.obj : $(GENERICDIR)\tkStubLib.c
	$(cc32) $(STUB_CFLAGS) $(TK_INCLUDES) -Zl -DSTATIC_BUILD -Fo$@ $?


$(TMP_DIR)\wish.exe.manifest: $(WINDIR)\wish.exe.manifest.in
	@nmakehlp -s << $** >$@
@MACHINE@	  $(MACHINE:IX86=X86)
@TK_WIN_VERSION@  $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION).0.0
<<

#---------------------------------------------------------------------
# Generate the makefile depedancies.
#---------------------------------------------------------------------

depend:
!if !exist($(TCLSH))
	@echo Build tclsh first!
!else
	set TCL_LIBRARY=$(TCL_LIBRARY)
	$(TCLSH) $(TCLTOOLSDIR)\mkdepend.tcl -vc32 -out:"$(OUT_DIR)\depend.mk" \
		-passthru:"-DBUILD_tk $(TK_INCLUDES)" $(GENERICDIR),$$(GENERICDIR) \
		$(WINDIR),$$(WINDIR) $(TTKDIR),$$(TTKDIR) $(XLIBDIR),$$(XLIBDIR) \
		$(BITMAPDIR),$$(BITMAPDIR) @<<
$(TKOBJS)
<<
!endif


#---------------------------------------------------------------------
# Dependency rules
#---------------------------------------------------------------------

$(TMP_DIR)\tk.res: \
    $(RCDIR)\buttons.bmp \
    $(RCDIR)\cursor*.cur \
    $(RCDIR)\tk.ico

!if exist("$(OUT_DIR)\depend.mk")
!include "$(OUT_DIR)\depend.mk"
!message *** Dependency rules in use.
!else
!message *** Dependency rules are not being used.
!endif

### add a spacer in the output
!message

#---------------------------------------------------------------------
# Implicit rules
#---------------------------------------------------------------------

{$(XLIBDIR)}.c{$(TMP_DIR)}.obj::
	$(cc32) -DBUILD_tk $(TK_CFLAGS) -Fo$(TMP_DIR)\ @<<
$<
<<

{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
	$(cc32) -DBUILD_tk $(TK_CFLAGS) -Fo$(TMP_DIR)\ @<<
$<
<<

{$(TTKDIR)}.c{$(TMP_DIR)}.obj::
	$(cc32) -DBUILD_tk $(TK_CFLAGS) -Fo$(TMP_DIR)\ @<<
$<
<<

{$(WINDIR)}.c{$(TMP_DIR)}.obj::
	$(cc32) -DBUILD_tk $(TK_CFLAGS) -Fo$(TMP_DIR)\ @<<
$<
<<

{$(ROOT)\unix}.c{$(TMP_DIR)}.obj::
	$(cc32) -DBUILD_tk $(TK_CFLAGS) -Fo$(TMP_DIR)\ @<<
$<
<<

{$(RCDIR)}.rc{$(TMP_DIR)}.res:
	$(rc32) -fo $@ -r -i "$(GENERICDIR)" -i "$(TMP_DIR)" $(TCL_INCLUDES) \
	    -d DEBUG=$(DEBUG) -d UNCHECKED=$(UNCHECKED) \
	    -d TCL_THREADS=$(TCL_THREADS) \
	    -d STATIC_BUILD=$(STATIC_BUILD) \
	    $<

$(TMP_DIR)\tk.res: $(TMP_DIR)\wish.exe.manifest
$(TMP_DIR)\wish.res: $(TMP_DIR)\wish.exe.manifest

.SUFFIXES:
.SUFFIXES:.c .rc


#---------------------------------------------------------------------
# Installation.
#---------------------------------------------------------------------

install-binaries:
	@echo installing binaries
	@$(CPY) "$(WISH)" "$(BIN_INSTALL_DIR)\"
!if $(TKLIB) != $(TKIMPLIB)
	@$(CPY) "$(TKLIB)" "$(BIN_INSTALL_DIR)\"
!endif
	@$(CPY) "$(TKIMPLIB)" "$(LIB_INSTALL_DIR)\"
	@$(CPY) "$(TKSTUBLIB)" "$(LIB_INSTALL_DIR)\"
!if !$(STATIC_BUILD)
	@echo creating package index
	@type << > $(OUT_DIR)\pkgIndex.tcl
if {[package vcompare [package provide Tcl] $(TCL_PATCH_LEVEL)] != 0} { return }
package ifneeded Tk $(TK_PATCH_LEVEL) [list load [file join $$dir .. .. bin $(TKLIBNAME)] Tk]
<<
	@$(CPY) $(OUT_DIR)\pkgIndex.tcl "$(SCRIPT_INSTALL_DIR)\"
!endif

#"

install-libraries:
	@echo installing Tk headers
	@$(CPY) "$(GENERICDIR)\tk.h" "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tkDecls.h" "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tkPlatDecls.h" "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tkIntXlibDecls.h" "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(XLIBDIR)\X11\*.h" "$(INCLUDE_INSTALL_DIR)\X11\"
	@echo installing script library
	@$(CPY) "$(ROOT)\library\*" "$(SCRIPT_INSTALL_DIR)\"
	@echo installing theme library
	@$(CPY) "$(ROOT)\library\ttk\*" "$(SCRIPT_INSTALL_DIR)\ttk\"
	@echo installing demos
	@$(CPY) "$(ROOT)\library\demos\*" "$(SCRIPT_INSTALL_DIR)\demos\"
	@$(CPY) "$(ROOT)\library\demos\images\*" "$(SCRIPT_INSTALL_DIR)\demos\images\"
	@echo installing images
	@$(CPY) "$(ROOT)\library\images\*" "$(SCRIPT_INSTALL_DIR)\images\"
	@echo installing language files
	@$(CPY) "$(ROOT)\library\msgs\*" "$(SCRIPT_INSTALL_DIR)\msgs\"

#"

#---------------------------------------------------------------------
# Clean up
#---------------------------------------------------------------------

tidy:
!if $(TKLIB) != $(TKIMPLIB)
	@echo Removing $(TKLIB) ...
	@if exist $(TKLIB) del $(TKLIB)
!endif
	@echo Removing $(TKIMPLIB) ...
	@if exist $(TKIMPLIB) del $(TKIMPLIB)
	@echo Removing $(WISH) ...
	@if exist $(WISH) del $(WISH)
	@echo Removing $(TKTEST) ...
	@if exist $(TKTEST) del $(TKTEST)
	@echo Removing $(TKSTUBLIB) ...
	@if exist $(TKSTUBLIB) del $(TKSTUBLIB)

clean:
	@echo Cleaning $(TMP_DIR)\* ...
	@if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
	@echo Cleaning $(WINDIR)\nmakehlp.obj ...
	@if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj
	@echo Cleaning $(WINDIR)\nmakehlp.exe ...
	@if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
	@echo Cleaning $(WINDIR)\_junk.pch ...
	@if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch
	@echo Cleaning $(WINDIR)\vercl.x ...
	@if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x
	@echo Cleaning $(WINDIR)\vercl.i ...
	@if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i
	@echo Cleaning $(WINDIR)\versions.vc ...
	@if exist $(WINDIR)\versions.vc del $(WINDIR)\versions.vc

hose:
	@echo Hosing $(OUT_DIR)\* ...
	@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)