#------------------------------------------------------------------------------ # makefile.vc -- # # Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. # # Copyright (c) 1995-1996 Sun Microsystems, Inc. # Copyright (c) 1998-2000 Ajuba Solutions. # Copyright (c) 2001-2005 ActiveState Corporation. # Copyright (c) 2001-2004 David Gravereaux. # #------------------------------------------------------------------------------ # RCS: @(#) $Id: makefile.vc,v 1.117.2.2 2009/10/15 17:48:50 dgp Exp $ #------------------------------------------------------------------------------ # Check to see we are configured to build with MSVC (MSDEVDIR or MSVCDIR) # or with the MS Platform SDK (MSSDK). Visual Studio .NET 2003 and 2005 define # VCINSTALLDIR instead. !if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(MSSDK) && !defined(VCINSTALLDIR) MSG = ^ You need to run vcvars32.bat from Developer Studio or setenv.bat from the^ Platform SDK first to setup the environment. Jump to this line to read^ the build instructions. !error $(MSG) !endif #------------------------------------------------------------------------------ # HOW TO USE this makefile: # # 1) It is now necessary to have MSVCDir, MSDevDir or MSSDK set in the # environment. This is used as a check to see if vcvars32.bat had been # run prior to running nmake or during the installation of Microsoft # Visual C++, MSVCDir had been set globally and the PATH adjusted. # Either way is valid. # # You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin # directory to setup the proper environment, if needed, for your # current setup. This is a needed bootstrap requirement and allows the # swapping of different environments to be easier. # # 2) To use the Platform SDK (not expressly needed), run setenv.bat after # vcvars32.bat according to the instructions for it. This can also # turn on the 64-bit compiler, if your SDK has it. # # 3) Targets are: # release -- builds the core, the shell. (default) # core -- Only builds the core. # all -- builds everything. # test -- builds and runs the test suite. # tktest -- just builds the binaries for the test suite. # install -- installs the built binaries and libraries to $(INSTALLDIR) # as the root of the install tree. # cwish -- builds a console version of wish. # clean -- removes the contents of $(TMP_DIR) # hose -- removes the contents of $(TMP_DIR) and $(OUT_DIR) # genstubs -- rebuilds the Stubs table and support files (dev only). # depend -- Generates an accurate set of source dependancies for this # makefile. Helpful to avoid problems when the sources are # refreshed and you rebuild, but can "overbuild" when common # headers like tkInt.h just get small changes. # winhelp -- builds the windows .hlp file for Tcl from the troff man # files. # # 4) Macros usable on the commandline: # TCLDIR= # Sets the location for where to find the Tcl headers and # libraries. The install point is assumed when not specified. # Tk does need the source directory, though. Tk comes very close # to not needing the sources, but does, in fact, require them. # # INSTALLDIR= # Sets where to install Tcl from the built binaries. # C:\Progra~1\Tcl is assumed when not specified. # # OPTS=static,msvcrt,linkexten,threads,symbols,profile,unchecked,none # Sets special options for the core. The default is for none. # Any combination of the above may be used (comma separated). # 'none' will over-ride everything to nothing. # # static = Builds a static library of the core instead of a # dll. The shell will be static (and large), as well. # msvcrt = Effects the static option only to switch it from # using libcmt(d) as the C runtime [by default] to # msvcrt(d). This is useful for static embedding # support. # staticpkg= Affects the static option only to switch wishXX.exe # to have the dde and reg extension linked inside it. # threads = Turns on full multithreading support. # thrdalloc= Use the thread allocator (shared global free pool). # symbols = Adds symbols for step debugging. # profile = Adds profiling hooks. Map file is assumed. # loimpact = Adds a flag for how NT treats the heap to keep # memory in use, low. This is said to impact alloc # performance. # unchecked= Allows a symbols build to not use the debug # enabled runtime (msvcrt.dll not msvcrtd.dll # or libcmt.lib not libcmtd.lib). # noxp = If you do not have the uxtheme.h header then you # cannot include support for XP themeing. # square = Include the demo square widget. # # STATS=memdbg,compdbg,none # Sets optional memory and bytecode compiler debugging code added # to the core. The default is for none. Any combination of the # above may be used (comma separated). 'none' will over-ride # everything to nothing. # # memdbg = Enables the debugging memory allocator. # compdbg = Enables byte compilation logging. # # CHECKS=nodep,fullwarn,none # Sets special macros for checking compatability. # # nodep = Turns off compatability macros to ensure Tk isn't # being built with deprecated functions. # fullwarn = Builds with full compiler and link warnings enabled. # Very verbose. # # MACHINE=(IX86|IA64|AMD64|ALPHA) # Set the machine type used for the compiler, linker, and # resource compiler. This hook is needed to tell the tools # when alternate platforms are requested. IX86 is the default # when not specified. # # TMP_DIR= # OUT_DIR= # Hooks to allow the intermediate and output directories to be # changed. $(OUT_DIR) is assumed to be # $(BINROOT)\(Release|Debug) based on if symbols are requested. # $(TMP_DIR) will de $(OUT_DIR)\ by default. # # TESTPAT= # Reads the tests requested to be run from this file. # # 5) Examples: # # Basic syntax of calling nmake looks like this: # nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] # # Standard (no frills) # c:\tk_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat # Setting environment for using Microsoft Visual C++ tools. # c:\tk_src\win\>nmake -f makefile.vc release # c:\tk_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl # # Building for Win64 # c:\tk_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat # Setting environment for using Microsoft Visual C++ tools. # c:\tk_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL # Targeting Windows pre64 RETAIL # c:\tk_src\win\>nmake -f makefile.vc MACHINE=IA64 # #------------------------------------------------------------------------------ #============================================================================== ############################################################################### # //==================================================================\\ # >>[ -> Do not modify below this line. <- ]<< # >>[ Please, use the commandline macros to modify how Tcl is built. ]<< # >>[ If you need more features, send us a patch for more macros. ]<< # \\==================================================================// ############################################################################### #============================================================================== #------------------------------------------------------------------------------ !if !exist("makefile.vc") MSG = ^ You must run this makefile only from the directory it is in.^ Please `cd` to its location first. !error $(MSG) !endif PROJECT = tk !include "rules.vc" !if $(TCLINSTALL) !message *** Warning: Tk requires the source distribution of Tcl to build from, !message *** at this time, sorry. Please set the TCLDIR macro to point to the !message *** Tcl sources. !endif # Extra makefile options processing... !if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"] HAVE_UXTHEME_H = 1 TTK_SQUARE_WIDGET = 0 !else !if [nmakehlp -f $(OPTS) "noxp"] !message *** Exclude support for XP theme HAVE_UXTHEME_H = 0 !else HAVE_UXTHEME_H = 1 !endif !if [nmakehlp -f "$(OPTS)" "square"] !message *** Include ttk square demo widget TTK_SQUARE_WIDGET = 1 !else TTK_SQUARE_WIDGET = 0 !endif !endif STUBPREFIX = $(PROJECT)stub WISHNAMEPREFIX = wish BINROOT = . ROOT = .. TK_LIBRARY = $(ROOT)\library TKIMPLIB = "$(OUT_DIR)\$(PROJECT)$(TK_VERSION)$(SUFX).lib" TKLIBNAME = $(PROJECT)$(TK_VERSION)$(SUFX).$(EXT) TKLIB = "$(OUT_DIR)\$(TKLIBNAME)" TKSTUBLIBNAME = $(STUBPREFIX)$(TK_VERSION).lib TKSTUBLIB = "$(OUT_DIR)\$(TKSTUBLIBNAME)" WISH = "$(OUT_DIR)\$(WISHNAMEPREFIX)$(TK_VERSION)$(SUFX).exe" WISHC = "$(OUT_DIR)\$(WISHNAMEPREFIX)c$(TK_VERSION)$(SUFX).exe" TKTEST = "$(OUT_DIR)\$(PROJECT)test.exe" CAT32 = "$(OUT_DIR)\cat32.exe" LIB_INSTALL_DIR = $(_INSTALLDIR)\lib BIN_INSTALL_DIR = $(_INSTALLDIR)\bin DOC_INSTALL_DIR = $(_INSTALLDIR)\doc SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\$(PROJECT)$(TK_DOTVERSION) INCLUDE_INSTALL_DIR = $(_INSTALLDIR)\include WISHOBJS = \ $(TMP_DIR)\winMain.obj \ !if $(TCL_USE_STATIC_PACKAGES) $(TCLDDELIB) \ $(TCLREGLIB) \ !endif $(TMP_DIR)\wish.res TKTESTOBJS = \ $(TMP_DIR)\testMain.obj \ $(TMP_DIR)\tkSquare.obj \ $(TMP_DIR)\tkTest.obj \ $(TMP_DIR)\tkOldTest.obj \ $(TMP_DIR)\tkWinTest.obj XLIBOBJS = \ $(TMP_DIR)\xcolors.obj \ $(TMP_DIR)\xdraw.obj \ $(TMP_DIR)\xgc.obj \ $(TMP_DIR)\ximage.obj \ $(TMP_DIR)\xutil.obj TKOBJS = \ $(TMP_DIR)\tkConsole.obj \ $(TMP_DIR)\tkUnixMenubu.obj \ $(TMP_DIR)\tkUnixScale.obj \ $(XLIBOBJS) \ $(TMP_DIR)\tkWin3d.obj \ $(TMP_DIR)\tkWin32Dll.obj \ $(TMP_DIR)\tkWinButton.obj \ $(TMP_DIR)\tkWinClipboard.obj \ $(TMP_DIR)\tkWinColor.obj \ $(TMP_DIR)\tkWinConfig.obj \ $(TMP_DIR)\tkWinCursor.obj \ $(TMP_DIR)\tkWinDialog.obj \ $(TMP_DIR)\tkWinDraw.obj \ $(TMP_DIR)\tkWinEmbed.obj \ $(TMP_DIR)\tkWinFont.obj \ $(TMP_DIR)\tkWinImage.obj \ $(TMP_DIR)\tkWinInit.obj \ $(TMP_DIR)\tkWinKey.obj \ $(TMP_DIR)\tkWinMenu.obj \ $(TMP_DIR)\tkWinPixmap.obj \ $(TMP_DIR)\tkWinPointer.obj \ $(TMP_DIR)\tkWinRegion.obj \ $(TMP_DIR)\tkWinScrlbr.obj \ $(TMP_DIR)\tkWinSend.obj \ $(TMP_DIR)\tkWinSendCom.obj \ $(TMP_DIR)\tkWinWindow.obj \ $(TMP_DIR)\tkWinWm.obj \ $(TMP_DIR)\tkWinX.obj \ $(TMP_DIR)\stubs.obj \ $(TMP_DIR)\tk3d.obj \ $(TMP_DIR)\tkArgv.obj \ $(TMP_DIR)\tkAtom.obj \ $(TMP_DIR)\tkBind.obj \ $(TMP_DIR)\tkBitmap.obj \ $(TMP_DIR)\tkButton.obj \ $(TMP_DIR)\tkCanvArc.obj \ $(TMP_DIR)\tkCanvBmap.obj \ $(TMP_DIR)\tkCanvImg.obj \ $(TMP_DIR)\tkCanvLine.obj \ $(TMP_DIR)\tkCanvPoly.obj \ $(TMP_DIR)\tkCanvPs.obj \ $(TMP_DIR)\tkCanvText.obj \ $(TMP_DIR)\tkCanvUtil.obj \ $(TMP_DIR)\tkCanvWind.obj \ $(TMP_DIR)\tkCanvas.obj \ $(TMP_DIR)\tkClipboard.obj \ $(TMP_DIR)\tkCmds.obj \ $(TMP_DIR)\tkColor.obj \ $(TMP_DIR)\tkConfig.obj \ $(TMP_DIR)\tkCursor.obj \ $(TMP_DIR)\tkEntry.obj \ $(TMP_DIR)\tkError.obj \ $(TMP_DIR)\tkEvent.obj \ $(TMP_DIR)\tkFileFilter.obj \ $(TMP_DIR)\tkFocus.obj \ $(TMP_DIR)\tkFont.obj \ $(TMP_DIR)\tkFrame.obj \ $(TMP_DIR)\tkGC.obj \ $(TMP_DIR)\tkGeometry.obj \ $(TMP_DIR)\tkGet.obj \ $(TMP_DIR)\tkGrab.obj \ $(TMP_DIR)\tkGrid.obj \ $(TMP_DIR)\tkImage.obj \ $(TMP_DIR)\tkImgBmap.obj \ $(TMP_DIR)\tkImgGIF.obj \ $(TMP_DIR)\tkImgPPM.obj \ $(TMP_DIR)\tkImgPhoto.obj \ $(TMP_DIR)\tkImgUtil.obj \ $(TMP_DIR)\tkListbox.obj \ $(TMP_DIR)\tkMacWinMenu.obj \ $(TMP_DIR)\tkMain.obj \ $(TMP_DIR)\tkMenu.obj \ $(TMP_DIR)\tkMenubutton.obj \ $(TMP_DIR)\tkMenuDraw.obj \ $(TMP_DIR)\tkMessage.obj \ $(TMP_DIR)\tkPanedWindow.obj \ $(TMP_DIR)\tkObj.obj \ $(TMP_DIR)\tkOldConfig.obj \ $(TMP_DIR)\tkOption.obj \ $(TMP_DIR)\tkPack.obj \ $(TMP_DIR)\tkPlace.obj \ $(TMP_DIR)\tkPointer.obj \ $(TMP_DIR)\tkRectOval.obj \ $(TMP_DIR)\tkScale.obj \ $(TMP_DIR)\tkScrollbar.obj \ $(TMP_DIR)\tkSelect.obj \ $(TMP_DIR)\tkStyle.obj \ $(TMP_DIR)\tkText.obj \ $(TMP_DIR)\tkTextBTree.obj \ $(TMP_DIR)\tkTextDisp.obj \ $(TMP_DIR)\tkTextImage.obj \ $(TMP_DIR)\tkTextIndex.obj \ $(TMP_DIR)\tkTextMark.obj \ $(TMP_DIR)\tkTextTag.obj \ $(TMP_DIR)\tkTextWind.obj \ $(TMP_DIR)\tkTrig.obj \ $(TMP_DIR)\tkUndo.obj \ $(TMP_DIR)\tkUtil.obj \ $(TMP_DIR)\tkVisual.obj \ $(TMP_DIR)\tkStubInit.obj \ $(TMP_DIR)\tkStubLib.obj \ $(TMP_DIR)\tkWindow.obj \ $(TTK_OBJS) \ !if !$(STATIC_BUILD) $(TMP_DIR)\tk.res !endif TTK_OBJS = \ $(TMP_DIR)\ttkWinMonitor.obj \ $(TMP_DIR)\ttkWinTheme.obj \ $(TMP_DIR)\ttkWinXPTheme.obj \ $(TMP_DIR)\ttkBlink.obj \ $(TMP_DIR)\ttkButton.obj \ $(TMP_DIR)\ttkCache.obj \ $(TMP_DIR)\ttkClamTheme.obj \ $(TMP_DIR)\ttkClassicTheme.obj \ $(TMP_DIR)\ttkDefaultTheme.obj \ $(TMP_DIR)\ttkElements.obj \ $(TMP_DIR)\ttkEntry.obj \ $(TMP_DIR)\ttkFrame.obj \ $(TMP_DIR)\ttkImage.obj \ $(TMP_DIR)\ttkInit.obj \ $(TMP_DIR)\ttkLabel.obj \ $(TMP_DIR)\ttkLayout.obj \ $(TMP_DIR)\ttkManager.obj \ $(TMP_DIR)\ttkNotebook.obj \ $(TMP_DIR)\ttkPanedwindow.obj \ $(TMP_DIR)\ttkProgress.obj \ $(TMP_DIR)\ttkScale.obj \ $(TMP_DIR)\ttkScrollbar.obj \ $(TMP_DIR)\ttkScroll.obj \ $(TMP_DIR)\ttkSeparator.obj \ $(TMP_DIR)\ttkSquare.obj \ $(TMP_DIR)\ttkState.obj \ $(TMP_DIR)\ttkTagSet.obj \ $(TMP_DIR)\ttkTheme.obj \ $(TMP_DIR)\ttkTrace.obj \ $(TMP_DIR)\ttkTrack.obj \ $(TMP_DIR)\ttkTreeview.obj \ $(TMP_DIR)\ttkWidget.obj \ $(TMP_DIR)\ttkStubInit.obj TKSTUBOBJS = \ $(TMP_DIR)\tkStubLib.obj $(TMP_DIR)\ttkStubLib.obj WINDIR = $(ROOT)\win GENERICDIR = $(ROOT)\generic XLIBDIR = $(ROOT)\xlib TTKDIR = $(ROOT)\generic\ttk BITMAPDIR = $(ROOT)\bitmaps DOCDIR = $(ROOT)\doc RCDIR = $(WINDIR)\rc TK_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)" -I"$(BITMAPDIR)" -I"$(XLIBDIR)" \ $(TCL_INCLUDES) CONFIG_DEFS =-DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 \ -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 \ -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 \ -DSUPPORT_CONFIG_EMBEDDED \ !if $(HAVE_UXTHEME_H) -DHAVE_UXTHEME_H=1 \ !endif !if $(TTK_SQUARE_WIDGET) -DTTK_SQUARE_WIDGET=1 \ !endif TK_DEFINES =-DBUILD_ttk $(OPTDEFINES) $(CONFIG_DEFS) #--------------------------------------------------------------------- # Compile flags #--------------------------------------------------------------------- !if !$(DEBUG) !if $(OPTIMIZING) ### This cranks the optimization level to maximize speed ### We can't use -O2 because sometimes it causes problems. cdebug = $(OPTIMIZATIONS) !else cdebug = !endif !if $(SYMBOLS) cdebug = $(cdebug) -Zi !endif !else if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" ### Warnings are too many, can't support warnings into errors. cdebug = -Zi -Od $(DEBUGFLAGS) !else cdebug = -Zi -WX $(DEBUGFLAGS) !endif ### Declarations common to all compiler options cwarn = $(WARNINGS) -D _CRT_SECURE_NO_DEPRECATE -D _CRT_NONSTDC_NO_DEPRECATE cflags = -nologo -c $(COMPILERFLAGS) $(cwarn) -Fp$(TMP_DIR)^\ !if $(MSVCRT) !if $(DEBUG) && !$(UNCHECKED) crt = -MDd !else crt = -MD !endif !else !if $(DEBUG) && !$(UNCHECKED) crt = -MTd !else crt = -MT !endif !endif BASE_CFLAGS = $(cdebug) $(cflags) $(crt) $(TK_INCLUDES) TK_CFLAGS = $(BASE_CFLAGS) $(TK_DEFINES) -DUSE_TCL_STUBS CON_CFLAGS = $(cdebug) $(cflags) $(crt) -DCONSOLE WISH_CFLAGS = $(BASE_CFLAGS) $(TK_DEFINES) STUB_CFLAGS = $(cflags) $(cdebug) $(TK_DEFINES) #--------------------------------------------------------------------- # Link flags #--------------------------------------------------------------------- !if $(DEBUG) ldebug = -debug -debugtype:cv !else ldebug = -release -opt:ref -opt:icf,3 !endif ### Declarations common to all linker options lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug) !if $(PROFILE) lflags = $(lflags) -profile !endif !if $(ALIGN98_HACK) && !$(STATIC_BUILD) ### Align sections for PE size savings. lflags = $(lflags) -opt:nowin98 !else if !$(ALIGN98_HACK) && $(STATIC_BUILD) ### Align sections for speed in loading by choosing the virtual page size. lflags = $(lflags) -align:4096 !endif !if $(LOIMPACT) lflags = $(lflags) -ws:aggressive !endif dlllflags = $(lflags) -dll conlflags = $(lflags) -subsystem:console guilflags = $(lflags) -subsystem:windows baselibs = kernel32.lib user32.lib # Avoid 'unresolved external symbol __security_cookie' errors. # c.f. http://support.microsoft.com/?id=894573 !if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" !if $(VCVERSION) > 1399 && $(VCVERSION) < 1500 baselibs = $(baselibs) bufferoverflowU.lib !endif !endif guilibs = $(baselibs) gdi32.lib #--------------------------------------------------------------------- # TkTest flags #--------------------------------------------------------------------- !if "$(TESTPAT)" != "" TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) !endif #--------------------------------------------------------------------- # Project specific targets #--------------------------------------------------------------------- release: setup $(TKSTUBLIB) $(WISH) all: release $(CAT32) core: setup $(TKSTUBLIB) $(TKLIB) cwish: $(WISHC) install: install-binaries install-libraries install-docs tktest: setup $(TKTEST) $(CAT32) test: test-classic test-ttk test-classic: setup $(TKTEST) $(TKLIB) $(CAT32) @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) @set TK_LIBRARY=$(TK_LIBRARY:\=/) @set TCLLIBPATH= !if $(TCLINSTALL) @set PATH=$(_TCLDIR)\bin;$(PATH) !else @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif !if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" $(TKTEST) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) | $(CAT32) !else $(TKTEST) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) | $(CAT32) !endif test-ttk: setup $(TKTEST) $(TKLIB) $(CAT32) @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) @set TK_LIBRARY=$(TK_LIBRARY:\=/) @set TCLLIBPATH= !if $(TCLINSTALL) @set PATH=$(_TCLDIR)\bin;$(PATH) !else @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif !if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" $(TKTEST) "$(ROOT)/tests/ttk/all.tcl" $(TESTFLAGS) | $(CAT32) !else $(TKTEST) "$(ROOT)/tests/ttk/all.tcl" $(TESTFLAGS) | $(CAT32) !endif runtest: setup $(TKTEST) $(TKLIB) $(CAT32) @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) @set TK_LIBRARY=$(TK_LIBRARY:\=/) @set TCLLIBPATH= !if $(TCLINSTALL) @set PATH=$(_TCLDIR)\bin;$(PATH) !else @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif $(TKTEST) rundemo: setup $(TKTEST) $(TKLIB) $(CAT32) @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) @set TK_LIBRARY=$(TK_LIBRARY:\=/) @set TCLLIBPATH= !if $(TCLINSTALL) @set PATH=$(_TCLDIR)\bin;$(PATH) !else @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif $(TKTEST) $(ROOT)\library\demos\widget shell: setup $(WISH) @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) @set TK_LIBRARY=$(TK_LIBRARY:\=/) @set TCLLIBPATH= !if $(TCLINSTALL) @set PATH=$(_TCLDIR)\bin;$(PATH) !else @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif $(WISH) << console show << dbgshell: setup $(WISH) @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) @set TK_LIBRARY=$(TK_LIBRARY:\=/) @set TCLLIBPATH= !if $(TCLINSTALL) @set PATH=$(_TCLDIR)\bin;$(PATH) !else @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif windbg $(WISH) setup: @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) !if !$(STATIC_BUILD) $(TKIMPLIB): $(TKLIB) !endif $(TKLIB): $(TKOBJS) !if $(STATIC_BUILD) $(lib32) -nologo -out:$@ @<< $** << !else $(link32) $(dlllflags) -base:@$(COFFBASE),tk -out:$@ $(guilibs) \ $(TCLSTUBLIB) @<< $** << $(_VC_MANIFEST_EMBED_DLL) -@del $*.exp !endif $(TKSTUBLIB): $(TKSTUBOBJS) $(lib32) -nologo -out:$@ $** $(WISH): $(WISHOBJS) $(TKIMPLIB) $(link32) $(guilflags) -stack:2300000 -out:$@ $(guilibs) $(TCLIMPLIB) $** $(_VC_MANIFEST_EMBED_EXE) $(WISHC): $(WISHOBJS) $(TKIMPLIB) $(link32) $(conlflags) -stack:2300000 -out:$@ $(guilibs) $(TCLIMPLIB) $** $(_VC_MANIFEST_EMBED_EXE) $(TKTEST): $(TKTESTOBJS) $(TKIMPLIB) $(link32) $(guilflags) -stack:2300000 -out:$@ $(guilibs) $(TCLIMPLIB) $** $(_VC_MANIFEST_EMBED_EXE) $(CAT32): $(_TCLDIR)\win\cat.c $(cc32) $(CON_CFLAGS) -Fo$(TMP_DIR)\ $? $(link32) $(conlflags) -out:$@ -stack:16384 $(TMP_DIR)\cat.obj $(baselibs) $(_VC_MANIFEST_EMBED_EXE) #--------------------------------------------------------------------- # Regenerate the stubs files. #--------------------------------------------------------------------- genstubs: !if !exist($(TCLSH)) @echo Build tclsh first! !else set TCL_LIBRARY=$(TCL_LIBRARY) $(TCLSH) $(_TCLDIR)\tools\genStubs.tcl $(GENERICDIR) \ $(GENERICDIR)\$(PROJECT).decls $(GENERICDIR)\$(PROJECT)Int.decls !endif #--------------------------------------------------------------------- # Regenerate the windows help files. #--------------------------------------------------------------------- HLPBASE = $(PROJECT)$(TK_VERSION) HELPFILE = $(OUT_DIR)\$(HLPBASE).hlp HELPCNT = $(OUT_DIR)\$(HLPBASE).cnt DOCTMP_DIR = $(OUT_DIR)\$(PROJECT)_docs HELPRTF = $(DOCTMP_DIR)\$(PROJECT).rtf MAN2HELP = $(DOCTMP_DIR)\man2help.tcl MAN2HELP2 = $(DOCTMP_DIR)\man2help2.tcl INDEX = $(DOCTMP_DIR)\index.tcl BMP = $(DOCTMP_DIR)\lamp.bmp BMP_NOPATH = lamp.bmp MAN2TCL = $(DOCTMP_DIR)\man2tcl.exe winhelp: docsetup $(HELPFILE) docsetup: @if not exist $(DOCTMP_DIR)\nul mkdir $(DOCTMP_DIR) $(MAN2HELP) $(MAN2HELP2) $(INDEX): $(TCLTOOLSDIR)\$$(@F) $(CPY) $(TCLTOOLSDIR)\$(@F) $(@D) $(BMP): $(CPY) $(WINDIR)\rc\$(@F) $(@D) $(HELPFILE): $(HELPRTF) $(BMP) cd $(DOCTMP_DIR) start /wait hcrtf.exe -x <<$(PROJECT).hpj [OPTIONS] COMPRESS=12 Hall Zeck LCID=0x409 0x0 0x0 ; English (United States) TITLE=Tk Reference Manual BMROOT=. CNT=$(@B).cnt HLP=$(@B).hlp [FILES] $(PROJECT).rtf [WINDOWS] main="Tcl/Tk Reference Manual",,27648,(r15263976),(r4227327) [CONFIG] BrowseButtons() CreateButton(1, "Web", ExecFile("http://www.tcl.tk")) CreateButton(2, "SF", ExecFile("http://sf.net/projects/tcl")) CreateButton(3, "Wiki", ExecFile("http://wiki.tcl.tk")) CreateButton(4, "FAQ", ExecFile("http://www.purl.org/NET/Tcl-FAQ/")) << cd $(MAKEDIR) $(CPY) "$(DOCTMP_DIR)\$(@B).hlp" "$(OUT_DIR)" $(CPY) "$(DOCTMP_DIR)\$(@B).cnt" "$(OUT_DIR)" $(MAN2TCL): $(TCLTOOLSDIR)\$$(@B).c $(cc32) $(TK_CFLAGS) -Fo$(@D)\ $(TCLTOOLSDIR)\$(@B).c $(link32) $(conlflags) -out:$@ -stack:16384 $(@D)\man2tcl.obj $(_VC_MANIFEST_EMBED_EXE) $(HELPRTF): $(MAN2TCL) $(MAN2HELP) $(MAN2HELP2) $(INDEX) $(TCLSH) $(MAN2HELP) -bitmap $(BMP_NOPATH) $(PROJECT) $(TK_VERSION) $(DOCDIR:\=/) install-docs: !if exist($(HELPFILE)) $(CPY) "$(HELPFILE)" "$(DOC_INSTALL_DIR)\" $(CPY) "$(HELPCNT)" "$(DOC_INSTALL_DIR)\" $(TCLSH) << puts "Installing $(PROJECT)'s helpfile contents into Tcl's ..." set f [open "$(DOC_INSTALL_DIR:\=/)/tcl$(TK_VERSION).cnt" r] while {![eof $$f]} { if {[regexp {:Include $(PROJECT)([0-9]{2}).cnt} [gets $$f] dummy ver]} { if {$$ver == $(TK_VERSION)} { puts "Already installed." exit } else { # do something here logical to remove (or replace) it. puts "$$ver != $(TK_VERSION), unfinished code path, die, die!" exit 1 } } } close $$f set f [open "$(DOC_INSTALL_DIR:\=/)/tcl$(TK_VERSION).cnt" a] puts $$f {:Include $(HLPBASE).cnt} close $$f << start /wait winhlp32 -g $(DOC_INSTALL_DIR)\tcl$(TK_VERSION).hlp !endif #--------------------------------------------------------------------- # Special case object file targets #--------------------------------------------------------------------- $(TMP_DIR)\testMain.obj: $(WINDIR)\winMain.c $(cc32) $(WISH_CFLAGS) -DTK_TEST \ -DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \ -Fo$@ $? $(TMP_DIR)\tkTest.obj: $(GENERICDIR)\tkTest.c $(cc32) $(WISH_CFLAGS) -Fo$@ $? $(TMP_DIR)\tkOldTest.obj: $(GENERICDIR)\tkOldTest.c $(cc32) $(WISH_CFLAGS) -Fo$@ $? $(TMP_DIR)\tkWinTest.obj: $(WINDIR)\tkWinTest.c $(cc32) $(WISH_CFLAGS) -Fo$@ $? $(TMP_DIR)\tkSquare.obj: $(GENERICDIR)\tkSquare.c $(cc32) $(WISH_CFLAGS) -Fo$@ $? $(TMP_DIR)\winMain.obj: $(WINDIR)\winMain.c $(cc32) $(WISH_CFLAGS) \ -DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \ -Fo$@ $? # The following objects are part of the stub library and should not # be built as DLL objects but none of the symbols should be exported # and no reference made to a C runtime. $(TMP_DIR)\tkStubLib.obj : $(GENERICDIR)\tkStubLib.c $(cc32) $(STUB_CFLAGS) $(TK_INCLUDES) -Zl -DSTATIC_BUILD -Fo$@ $? $(TMP_DIR)\wish.exe.manifest: $(WINDIR)\wish.exe.manifest.in @nmakehlp -s << $** >$@ @MACHINE@ $(MACHINE:IX86=X86) @TK_WIN_VERSION@ $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION).0.0 << #--------------------------------------------------------------------- # Generate the makefile depedancies. #--------------------------------------------------------------------- depend: !if !exist($(TCLSH)) @echo Build tclsh first! !else set TCL_LIBRARY=$(TCL_LIBRARY) $(TCLSH) $(TCLTOOLSDIR)\mkdepend.tcl -vc32 -out:"$(OUT_DIR)\depend.mk" \ -passthru:"-DBUILD_tk $(TK_INCLUDES)" $(GENERICDIR),$$(GENERICDIR) \ $(WINDIR),$$(WINDIR) $(TTKDIR),$$(TTKDIR) $(XLIBDIR),$$(XLIBDIR) \ $(BITMAPDIR),$$(BITMAPDIR) @<< $(TKOBJS) << !endif #--------------------------------------------------------------------- # Dedependency rules #--------------------------------------------------------------------- $(TMP_DIR)\tk.res: \ $(RCDIR)\buttons.bmp \ $(RCDIR)\cursor*.cur \ $(RCDIR)\tk.ico !if exist("$(OUT_DIR)\depend.mk") !include "$(OUT_DIR)\depend.mk" !message *** Dependency rules in effect. !else !message *** Dependency rules are not being used. !endif ### add a spacer in the output !message #--------------------------------------------------------------------- # Implicit rules #--------------------------------------------------------------------- {$(XLIBDIR)}.c{$(TMP_DIR)}.obj:: $(cc32) -DBUILD_tk $(TK_CFLAGS) -Fo$(TMP_DIR)\ @<< $< << {$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: $(cc32) -DBUILD_tk $(TK_CFLAGS) -Fo$(TMP_DIR)\ @<< $< << {$(TTKDIR)}.c{$(TMP_DIR)}.obj:: $(cc32) -DBUILD_tk $(TK_CFLAGS) -Fo$(TMP_DIR)\ @<< $< << {$(WINDIR)}.c{$(TMP_DIR)}.obj:: $(cc32) -DBUILD_tk $(TK_CFLAGS) -Fo$(TMP_DIR)\ @<< $< << {$(ROOT)\unix}.c{$(TMP_DIR)}.obj:: $(cc32) -DBUILD_tk $(TK_CFLAGS) -Fo$(TMP_DIR)\ @<< $< << {$(RCDIR)}.rc{$(TMP_DIR)}.res: $(rc32) -fo $@ -r -i "$(GENERICDIR)" -i "$(TMP_DIR)" $(TCL_INCLUDES) \ -d DEBUG=$(DEBUG) -d UNCHECKED=$(UNCHECKED) \ -d TCL_THREADS=$(TCL_THREADS) \ -d STATIC_BUILD=$(STATIC_BUILD) \ $< $(TMP_DIR)\tk.res: $(TMP_DIR)\wish.exe.manifest $(TMP_DIR)\wish.res: $(TMP_DIR)\wish.exe.manifest .SUFFIXES: .SUFFIXES:.c .rc #--------------------------------------------------------------------- # Installation. #--------------------------------------------------------------------- install-binaries: @echo installing binaries @$(CPY) "$(WISH)" "$(BIN_INSTALL_DIR)\" !if $(TKLIB) != $(TKIMPLIB) @$(CPY) "$(TKLIB)" "$(BIN_INSTALL_DIR)\" !endif @$(CPY) "$(TKIMPLIB)" "$(LIB_INSTALL_DIR)\" @$(CPY) "$(TKSTUBLIB)" "$(LIB_INSTALL_DIR)\" !if !$(STATIC_BUILD) @echo creating package index @type << > $(OUT_DIR)\pkgIndex.tcl if {[catch {package present Tcl 8.5.0}]} { return } package ifneeded Tk $(TK_PATCH_LEVEL) [list load [file join $$dir .. .. bin $(TKLIBNAME)] Tk] << @$(CPY) $(OUT_DIR)\pkgIndex.tcl "$(SCRIPT_INSTALL_DIR)\" !endif #" install-libraries: @echo installing Tk headers @$(CPY) "$(GENERICDIR)\tk.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tkDecls.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tkPlatDecls.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tkIntXlibDecls.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(XLIBDIR)\X11\*.h" "$(INCLUDE_INSTALL_DIR)\X11\" @echo installing script library @$(CPY) "$(ROOT)\library\*" "$(SCRIPT_INSTALL_DIR)\" @echo installing theme library @$(CPY) "$(ROOT)\library\ttk\*" "$(SCRIPT_INSTALL_DIR)\ttk\" @echo installing demos @$(CPY) "$(ROOT)\library\demos\*" "$(SCRIPT_INSTALL_DIR)\demos\" @$(CPY) "$(ROOT)\library\demos\images\*" "$(SCRIPT_INSTALL_DIR)\demos\images\" @echo installing images @$(CPY) "$(ROOT)\library\images\*" "$(SCRIPT_INSTALL_DIR)\images\" @echo installing language files @$(CPY) "$(ROOT)\library\msgs\*" "$(SCRIPT_INSTALL_DIR)\msgs\" #" #--------------------------------------------------------------------- # Clean up #--------------------------------------------------------------------- tidy: !if $(TKLIB) != $(TKIMPLIB) @echo Removing $(TKLIB) ... @if exist $(TKLIB) del $(TKLIB) !endif @echo Removing $(TKIMPLIB) ... @if exist $(TKIMPLIB) del $(TKIMPLIB) @echo Removing $(WISH) ... @if exist $(WISH) del $(WISH) @echo Removing $(TKTEST) ... @if exist $(TKTEST) del $(TKTEST) @echo Removing $(TKSTUBLIB) ... @if exist $(TKSTUBLIB) del $(TKSTUBLIB) clean: @echo Cleaning $(TMP_DIR)\* ... @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) @echo Cleaning $(WINDIR)\nmakehlp.obj ... @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj @echo Cleaning $(WINDIR)\nmakehlp.exe ... @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe @echo Cleaning $(WINDIR)\_junk.pch ... @if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch @echo Cleaning $(WINDIR)\vercl.x ... @if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x @echo Cleaning $(WINDIR)\vercl.i ... @if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i @echo Cleaning $(WINDIR)\versions.vc ... @if exist $(WINDIR)\versions.vc del $(WINDIR)\versions.vc hose: @echo Hosing $(OUT_DIR)\* ... @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)