path: root/macosx/README

Tcl/Tk Mac OS X README 
----------------------

RCS: @(#) $Id: README,v 1.6.2.10 2005/11/27 06:44:16 das Exp $

This is the README file for the Mac OS X/Darwin version of Tcl/Tk.


1. Where to go for support
--------------------------

- The tcl-mac mailing list on sourceforge is the best place to ask questions
specific to Tcl & Tk on Mac OS X:
	http://lists.sourceforge.net/lists/listinfo/tcl-mac
(this page also has a link to searchable archives of the list, please check them
before asking on the list, many questions have already been answered).

- For general Tcl/Tk questions, the newsgroup comp.lang.tcl is your best bet:
	http://groups.google.com/group/comp.lang.tcl/

- The Tcl'ers Wiki also has many pages dealing with Tcl & Tk on Mac OS X, see
	http://wiki.tcl.tk/references/3753!
	http://wiki.tcl.tk/references/8361!

- Please report bugs with Tcl or Tk on Mac OS X to the sourceforge bug trackers:
	Tcl: http://sf.net/tracker/?func=add&group_id=10894&atid=110894
	Tk:  http://sf.net/tracker/?func=add&group_id=12997&atid=112997
please make sure that your report Tk specific bugs to the tktoolkit project bug
tracker rather than the tcl project bug tracker.
Mac OS X specific bugs should usually be assigned to 'das' or 'wolfsuit'.


2. Using Tcl/Tk on Mac OS X
---------------------------

- There are two versions of Tk available on Mac OS X: TkAqua using the native
aqua widgets and look&feel, and TkX11 using the traditional unix X11 wigets.
TkX11 requires an X11 server to be installed, such as Apple's X11 (which is
available as an optional install on recent Mac OS X retail disks).
TkAqua and TkX11 can be distinguished at runtime via [tk windowingsystem].

- At a minimum, Mac OS X 10.1 is required to run Tcl and TkX11, and OS X 10.2 is
required to run TkAqua. However OS X 10.3 or higher is recommended (certain
[file] operations behave incorrectly on earlier releases).

- Tcl/Tk built on Mac OS X 10.x will not run on 10.y for y < x, on the other
hand Tcl/Tk built on 10.y will run on 10.x for y < x (but without any of the
fixes and optimizations that would be available in a binary built on 10.x).

- Wish checks the Resources/Scripts directory in its application bundle for a
file called AppMain.tcl, if found it is used as the startup script and the
Scripts folder is added to the auto_path. This can be used to emulate the old
OS9 TclTk droplets.

- If standard input is a special file of zero length (e.g. /dev/null), Wish
brings up the Tk console window at startup. This is the case when double
clicking Wish in the Finder (or using 'open Wish.app' from the Terminal).

- Tcl extensions can be installed in any of:
	$HOME/Library/Tcl /Library/Tcl /Network/Library/Tcl /System/Library/Tcl
	$HOME/Library/Frameworks /Library/Frameworks /Network/Library/Frameworks
	/System/Library/Frameworks (searched in that order).
Given a potential package directory $pkg, Tcl on OSX checks for the file
$pkg/Resources/Scripts/pkgIndex.tcl as well as the usual $pkg/pkgIndex.tcl.
This allows building extensions as frameworks with all script files contained in
the Resources/Scripts directory of the framework.

- [load]able binary extensions can linked as either ordinary shared libraries
(.dylib) or as MachO bundles (since 8.4.10/8.5a3); only bundles can be unloaded,
and bundles are also loaded more efficiently from VFS (no temporary copy to the
native filesystem required).

- The 'deploy' target of macosx/GNUmakefile installs the html manpages into the
standard documentation location in the Tcl/Tk frameworks:
	Tcl.framework/Resources/Documentation/Reference/Tcl
	Tk.framework/Resources/Documentation/Reference/Tk
No nroff manpages are installed by default by the GNUmakefiles.

- The Tcl and Tk frameworks can be installed in any of the system's standard
framework directories:
	$HOME/Library/Frameworks /Library/Frameworks
	/Network/Library/Frameworks /System/Library/Frameworks

- /usr/bin/wish8.x is a script that calls a copy of 'Wish' contained in
	Tk.framework/Resources

- if 'Wish' is started from the Finder or via 'open', $argv contains a
"-psn_XXXX" argument. This is the Wish's carbon process serial number, you may
need to filter it out for cross platform compatibility of your scripts.

- the env array is different when Wish is started from the Finder than when it
(or tclsh) is invoked from the Terminal, in particular PATH may not be what you
expect. (Wish started from the Finder inherits the Finder's environment
variables, which are essentially those set in $HOME/.MacOSX/environment.plist
and not those set by your shell configuration files).

- As of Tk 8.4.7, TkAqua has a version of the low-level drawing primitives using
the CoreGraphics routines - the code is primarily due to James Tittle.  There
were numerous problems with the QD version, mostly due to the different drawing
model of QD & Tk. CG also trivially supports dashed lines, and the various end
caps & miters. So this is a great improvement.
The old QD code is retained for now, just in case there are any compatibility
problems. To switch back to the QD drawing, just put:
    set tk::mac::useCGDrawing 0
in your script before you do drawing. Also the CG drawing can anti-alias line
drawing. However, anti-aliased thin lines look washed out, so the threshold for
antialiasing is set to 3 pixel width lines. You can change this if you want by
putting:
    set tk::mac::CGAntialiasLimit <limit>
in your script before drawing, in which case only lines thinner that <limit>
pixels will not be antialiased.

- Quickdraw text antialiasing is enabled by default when available (from 10.1.5
onwards). Changing the global boolean variable '::tk::mac::antialiasedtext'
allows to dis/enable antialiasing on the fly from Tcl (even for existing text).

- Scrollbars: There are two scrollbar variants in Aqua, normal & small. The
normal scrollbar has a small dimension of 16, the small variant 12. Access to
the small variant was added in Tk 8.4.2.

- Cursors: You can now put up and spin the Classic MacOS spinner, and the
counting hands and watch cursor. The way this is done is each of the spinners
have a base name:
    spinning: The circular B&W circular spinner
    countinguphand: The counting up hand
    countingdownhand: The counting down hand
    countingupanddownhand: The counting up then down hand
    watch: The watch cursor
Then to get the sequential variants, add an integer to the end of the base name.
So, for instance this code will spin the spinner:
    proc spinCursor {widget count} {
        $widget configure -cursor spinning$count
        after 100 spinCursor [incr count]
    }
This was added in Tk 8.4.2


3. Building Tcl/Tk on Mac OS X
------------------------------

- At least Mac OS X 10.1 is required to build Tcl and TkX11 and OS X 10.2 is
required to build TkAqua. Apple's Developer Tools need to be installed (only the
most recent version matching your OS release is supported). The Developer Tools
installer is available on Mac OS X retail disks or is present in
/Applications/Installers on Macs that came with OS X preinstalled. The most
recent version can be downloaded from the ADC website http://connect.apple.com
(after you register for free ADC membership).

- Tcl/Tk are most easily built as Mac OS X frameworks via GNUmakefile in
tcl/macosx and tk/macosx (see below for details), but can also be built with the
standard unix configure and make buildsystem in tcl/unix resp. tk/unix as on any
other unix platform (indeed, the GNUmakefiles are just wrappers around the unix
buildsystem).
The Mac OS X specifc configure flags are --enable-aqua, --enable-framework and
--disable-corefoundation (which disables CF and notably reverts to the standard
select based notifier, you will only need this if your require use of naked fork
(i.e. not followed by execve) in an unthreaded core). Note that --enable-aqua is
incompatible with --disable-corefoundation (for both Tcl and Tk configure).

- It is also possible to build with Apple's IDE via the tk/macosx/Wish.pbproj
project, this simply calls through to the tk/macosx/GNUMakefile. It requires a
build of the tcl/macosx/Tcl.pbproj project.

- To build universal binaires, set CFLAGS as follows:
    export CFLAGS="-arch ppc -arch i386 \
	-isysroot /Developer/SDKs/MacOSX10.4u.sdk -mmacosx-version-min=10.4"
This requires Mac OS X 10.4 and Xcode 2.2 (_not_ Xcode 2.1) and will work on
any of the architectures (on i386 DTKs, the -isysroot is not required).
Note that it is not possible to configure correctly if the current architecture
is not present in CFLAGS (i.e. -arch `arch` must always be there).
Universal builds of Tk TEA extensions are also possible with CFLAGS set as
above, they will be [load]able by universal as well as thin binaries of Tk.
Note that while Tcl can be built for the ppc64 architecture, neither TkAqua nor
TkX11 can be built with -arch ppc64 as the corresponding GUI libraries are not
available for 64bit at present. However, linking a universal 'ppc i386' Tk
binary against a universal 'ppc ppc64 i386' Tcl binary works just fine.
The Tk configure script automatically removes '-arch ppc64' from CFLAGS to
facilitate universal building of both Tcl and Tk with the same CFLAGS setting.

Detailed Instructions for building with macosx/GNUmakefile
----------------------------------------------------------

- Unpack the Tcl and Tk source release archives and place the tcl and tk source
trees in a common parent directory.
[ If you don't want have the two source trees in one directory, you'll need to ]
[ create the following symbolic link for the build to work as setup by default ]
[      ln -fs /path_to_tcl/build /path_to_tk/build                             ]
[ (where /path_to_{tcl,tk} is the directory containing the tcl resp. tk tree)  ]
[ or you can pass an argument of BUILD_DIR=/somewhere to the tcl and tk make.  ]

- The following instructions assume the Tcl and Tk source trees are named
"tcl${ver}" and "tk${ver}", respectively, where ${ver} is a shell variable
containing the Tcl and Tk version number (for example '8.4.12').
Setup the shell variable as follows:
	set ver="8.4.12" ;: if your shell is csh
	ver="8.4.12"     ;: if your shell is sh
The source trees will be named this way only if you are building from a release
archive, if you are building from CVS, the version numbers will be missing; so
set ${ver} to the empty string instead:
	set ver=""       ;: if your shell is csh
	ver=""           ;: if your shell is sh

- The following steps will build Tcl and Tk from the Terminal, assuming you are
located in the directory containing the tcl and tk source trees:
	make -C tcl${ver}/macosx
	make -C tk${ver}/macosx
and the following will then install Tcl and Tk onto the root volume (admin
password required):
	sudo make -C tcl${ver}/macosx install
	sudo make -C tk${ver}/macosx  install
if you don't have the admin password, you can install into your home directory,
instead by passing an INSTALL_ROOT argument to make:
	make -C tcl${ver}/macosx install INSTALL_ROOT="${HOME}/"
	make -C tk${ver}/macosx  install INSTALL_ROOT="${HOME}/"

- The default Makefile targets will build _both_ debug and optimized versions of
the Tcl and Tk frameworks with the standard convention of naming the debug
library Tcl.framework/Tcl_debug resp. Tk.framework/Tk_debug.
This allows you to dynamically link to the debug libraries at runtime by setting
	setenv DYLD_IMAGE_SUFFIX _debug
(c.f. man dyld for more details)

If you only want to build and install the debug or optimized build, use the
'develop' or 'deploy' target variants of the Makefiles, respectively.
For example, to build and install only the optimized versions:
	make -C tcl${ver}/macosx deploy
	make -C tk${ver}/macosx deploy
	sudo make -C tcl${ver}/macosx install-deploy
	sudo make -C tk${ver}/macosx  install-deploy

- The Makefiles can also build a version of 'Wish' that has the Tcl and Tk
frameworks embedded in its application package. This allows for standalone
deployment of the application with no installation required, e.g. from read-only
media. To build & install in this manner, use the 'embedded' target variants of
the Makefiles. For example, to build a standalone 'Wish.app'
in ./embedded/Applications/Utilities:
	make -C tcl${ver}/macosx embedded
	make -C tk${ver}/macosx embedded
	sudo make -C tcl${ver}/macosx install-embedded INSTALL_ROOT=`pwd`/embedded/
	sudo make -C tk${ver}/macosx  install-embedded INSTALL_ROOT=`pwd`/embedded/
Notes:
  * if you've already built standard TclTkAqua, building embedded does not
  require any new compiling or linking, so you can skip the first two makes.
  (making relinking unnecessary was added in 8.4.2)
  * the embedded frameworks include only optimized builds and no documentation.
  * the standalone Wish has the directory Wish.app/Contents/lib in its
  auto_path. Thus you can place tcl extensions in this directory (i.e. embed
  them in the app package) and load them with [package require].

- It is possible to build Tk against an installed Tcl.framework; but you will
still need a tcl sourcetree in the location specified in TCL_SRC_DIR in
Tcl.framework/tclConfig.sh. Also, linking with Tcl.framework has to work exactly
as indicated in TCL_LIB_SPEC in Tcl.framework/tclConfig.sh.
If you used non-default install locations for Tcl.framework, specify them as
make overrides to the tk/macosx Makefile, e.g.
	make -C tk${ver}/macosx \
	    TCL_FRAMEWORK_DIR=$HOME/Library/Frameworks TCLSH_DIR=$HOME/usr/bin
	sudo make -C tk${ver}/macosx install \
	    TCL_FRAMEWORK_DIR=$HOME/Library/Frameworks TCLSH_DIR=$HOME/usr/bin
The Makefile variables TCL_FRAMEWORK_DIR and TCLSH_DIR were added in Tk 8.4.3.