tkdnd

NAME

SYNOPSIS

tkdnd::drag_source register window ?type-list? ?mouse-button?
tkdnd::drag_source unregister window

tkdnd::platform_specific_types type-list
tkdnd::platform_independent_types type-list

tkdnd::GetDropFileTempDirectory
tkdnd::SetDropFileTempDirectory directory

INTRODUCTION

The tkdnd family can be built from source code using the standard configure; make; make install procedure. Cmake is also supported. Some binary package are available from the SourceForge download site, from ActiveState's ActiveTcl distribution, and elsewhere.

With the tkdnd family commands the user is able to register existing Tk widgets as drag sources or drop targets, that are able to send or receive data during drag and drop operations, encoded in specific types. These types can be platform independent types like DND_Text and DND_Files or platform specific types, like CF_UNICODETEXT or text/plain.

The legal forms for the tkdnd commands are:

tkdnd::drop_target register window ?type-list?

This command will register window as a drop target. A drop target is a widget than can accept a drop action. window must exist when this command is executed and this command can be executed multiple times on a widget.

When window is registered as a drop target, and optional type-list can be provided. This type list can contain one or more types that window will accept during a drop action, and it can contain platform independent or platform specific types. Platform independent are DND_Text for dropping text portions and DND_Files for dropping a list of files (which can contain one or multiple files) on window. If type-list is not specified, it defaults to the empty list.

tkdnd::drop_target unregister window

This command will stop window from being a drop target. Thus, window will stop receiving events related to drop operations. It is an error to use this command for a window that has not been registered as a drop target with tkdnd::drop_target register.

tkdnd::drag_source register window ?type-list? ?mouse-button?

This command will register window as a drag source. A drag source is a widget than can start a drag action. window must exist when this command is executed and this command can be executed multiple times on a widget.

When window is registered as a drag source, and optional type-list can be provided. This type list can contain one or more types that window will provide during a drag action, and it can contain platform independent or platform specific types. Platform independent are DND_Text for dropping text portions and DND_Files for dropping a list of files (which can contain one or multiple files) on window. However, this type list is indicative/informative. window can initiate a drag action with even a different type list. If type-list is not specified, it defaults to the empty list.

Finally, mouse-button is the mouse button that will be used for starting the drag action. It can have any of the values 1 (left mouse button), 2 (middle mouse button - wheel) and 3 (right mouse button). If mouse-button is not specified, it defaults to 1.

tkdnd::drag_source unregister window

This command will stop window from being a drag source. Thus, window will stop receiving events related to drag operations. It is an error to use this command for a window that has not been registered as a drag source with tkdnd::drag_source register.

tkdnd::platform_specific_types type-list

This command will accept a list of types that can contain platform independnent or platform specific types. A new list will be returned, where each platform independent type in type-list will be substituted by one or more platform specific types. Thus, the returned list may have more elements than type-list.

tkdnd::platform_independent_types type-list

This command will accept a list of types that can contain platform independnent or platform specific types. A new list will be returned, where each platform specific type in type-list will be substituted by one or more platform independent types. Thus, the returned list may have more elements than type-list.

tkdnd::GetDropFileTempDirectory

This command will return the temporary directory used by TkDND for storing temporary files. When the package is loaded, this temporary directory will be initialised to a proper directory according to the operating system. This default initial value can be changed to be the value of the following environmental variables: TKDND_TEMP_DIR, TEMP, TMP.

tkdnd::SetDropFileTempDirectory directory

This command will change the temporary directory used by TkDND for storing temporary files to directory.

SUPPORTED TYPES

DND_Text:

This type can be used for transfering textual data. Internally, it is translated to the following platform specific formats:
Windows: CF_UNICODETEXT, CF_TEXT.
Unix: text/plain;charset=UTF-8, text/plain.
Mac: NSStringPboardType

DND_Files:

This type can be used for transfering a list of file names. Internally, it is translated to the following platform specific formats:
Windows: CF_HDROP.
Unix: text/uri-list.
Mac: NSFilenamesPboardType.

Additionally to the platform independent types, tkdnd supports the following platform specific types:

Windows:

CF_UNICODETEXT: Text transfer encoded in unicode.
CF_TEXT: Text transfer with application dependent encoding. If an encoding locale is specified through CF_LOCALE it is used, else the system encoding is used for the conversion.
FileGroupDescriptor - FileContents: These two types are used for transfering a set of files that do not appear physically on disk, like files from compressed folders or Outlook e-mail messages. File names are transfered as in the CF_TEXT type, while file contents are transfered in binary. Tkdnd retrieves both the file names and the file contents, and saves then in a temporary directory. When the transfer is complete, the file names of the saved files in the temporary folder are returned. Note that tkdnd support this type pair only as drop targets and not as drag sources.
FileGroupDescriptorW - FileContents: These two types are used for transfering a set of files that do not appear physically on disk, like files from compressed folders or Outlook e-mail messages. File names are transfered as in the CF_UNICODETEXT type, while file contents are transfered in binary. Tkdnd retrieves both the file names and the file contents, and saves then in a temporary directory. When the transfer is complete, the file names of the saved files in the temporary folder are returned. Note that tkdnd support this type pair only as drop targets and not as drag sources.
CF_HDROP: Files transfer encoded in UTF-8.

Unix:

Finally, format types used for drop types can have wildcards, following the same rules as "string match". For example, registering a drop target with the type "*", will accept any drop, no matter what the drop format is.  

EVENTS

The tkdnd package defines a set of virtual events, that correspond to various phases of a drag and drop operation. All windows that are either a drop target or a drag source are expected to have bindings for (all) these events, created with the bind Tk command. While these event bindings are regular Tk events, they have a small difference from plain Tk events: most of them are expected to return a value. Since Tk bindings cannot return a value, tkdnd does not actually generate these events (i.e. through "event generate"). Instead, tkdnd locates the script that has been bound to the virtual event, and directly executes it, as a script. Apart from this small difference in how the events are triggered, the events required by tkdnd can be viewed as regular events. In the following two sections all virtual events defined by the tkdnd package are presented.  

DROP TARGET EVENTS

<<DropEnter>>:

This event is triggered when the mouse enters the window during a drop action. The purpose of this event is to change the visual state of the window, so as to notify the user whether the drop will be accepted or not. The binding script is expected to return a single value that will define the drop action. This returned action can be one of copy, move, link, ask, private and refuse_drop. This event is not mandatory, but if it is defined, it has to return an action. In case an action is not returned, the drop is refused for this window.

<<DropPosition>>:

This events is triggered when the mouse moves inside the window during a drop action. The purpose of this event is to let window decide if it will accept the drop and the action of the drop, if a drop is going to happen at the specific mouse coordinates. Thus, the script binding for such an event can get the mouse coordinates and the pressed modifier buttons (such as ctrl, shift or alt), and is expected to return the drop action, which again must be one of copy, move, link, ask, private and refuse_drop. This event is not mandatory, but if it is defined, it has to return an action. In case an action is not returned, the drop is refused for this window.

<<DropLeave>>:

This event is triggered when the mouse leaves outside the area covered by window, whithout a drop happening. The binding of such an event is expected to restore the visual state of the window to normal (i.e. the visual state the window was in before the <<DropEnter>> event was triggered). The binding for such an event is not expected to return a value.

<<Drop>>:

This event is triggered by a drop action, and it is expected to handle the dropped data and reset the visual state of the window. The binding script is expected to return a value, which will be the action that has been performed to the data and must be one of copy, move, link, ask, private and refuse_drop. This event is not mandatory, but if it is defined, it has to return an action. In case an action is not returned, the drop is refused for this window.

<<Drop:type>>:

This event is a specialisation of the generic <<Drop>> event, augmented with a type. If such a binding exists and the drop type matches type, this event binding will be executed, instead of the generic <<Drop>> event binding. These events allow for easy specialisation of drop bindings, according to the type of the dropped data. type can be either a platform independent or a platform specific type. The binding script of such an event is expected to return a value, which will be the action that has been performed to the data and must be one of copy, move, link, ask, private and refuse_drop. This event is not mandatory, but if it is defined, it has to return an action. In case an action is not returned, the drop is refused for this window.

DRAG SOURCE EVENTS

<<DragInitCmd>>:

This event is triggered when a drag action is about to start. This is a mandatory event (whose absence will cancel the drag action), and is responsible for providing three things: the list of actions and format types supported by the drag source, and of course the data to be dropped. Thus, the binding script for such an event must return a list of three elements: the drop actions supported by the drag source (which can be any of copy, move, link, ask, and private), the format type list that the data can be dropped as (which can be any platform independent or platform specific type), and finally the data. A simple example of such a binding, is:

bind .drag_source <<DragInitCmd>> \
     {list copy DND_Text {Hellow world!}}

<<DragEndCmd>>:

This event is triggered when the drag action has finished (either when the drop was succesful or not). Its main purpose is to process the dropped data according to the drop action returned by the drop target. Binding for such an event is not mandatory, and the binding is not expected to return a value.

BINDING SCRIPTS AND SUBSTITUTIONS

If the binding script contains any % characters, then substitutions will be made, like in normal Tk binding scripts. Valid % specifiers are:

%%

Replaced with a single percent.

%A

The current action of the drag/drop operation.

%a

The action list supported by the drag source.

%b

The mouse button that is pressed during a drag/drop operation. Note that always a single mouse button is reported as pressed, even if more than one mouse buttons are actually pressed.

%c

The codes of the list of types supported by the drag source. All codes are in octal format and have the same order as the list of types obtained through the %t substitution.

%C

The code (in octal format) of the current type of the drag and drop operation.

%CTT

The list of types from the drop target type list that are common to the drag source type list.

%CST

The list of types from the drag source type list that are common to the drop target type list.

%D

The data that has been dropped. Under some platforms the data will be available before the drop has occured. The format of the data is the current type of the drop operation.

%e

The name of the current virtual event. One of <<DropEnter>>, <<DropPosition>>, <<DropLeave>>, <<Drop:type>>, <<Drop>>, <<DragInitCmd>>, <<DragEndCmd>>.

%L

The list of types supported by the drag source.

%m

The list of modifier keyboard keys that are pressed. Modifier keys are some special keys, like Shift, Control or Alt. Valid modifiers are "shift", "ctrl" and "alt". It is useful for binding scripts of drop target events to examine this list of modifiers, as it is quite usuall to change the action according to the state of some modifier keys.

%ST

The list of types supported by the drag source.

%t

The list of types supported by the drag source.

%T

The current type of the drag and drop operation.

%TT

The list of types supported by the drop target.

%W

The window that the event is delivered to.

%X

The mouse pointer x coordinate, relative to the root window.

%Y

The mouse pointer y coordinate, relative to the root window.

SPECIFYING DROP TARGETS

label .drop_target -text {Text Drop Target!} -bg white
tkdnd::drop_target register .drop_target DND_Text
bind .drop_target <<DropEnter>> {%W configure -bg yellow; list copy}
bind .drop_target <<DropPosition>> {list copy}
bind .drop_target <<DropLeave>> {%W configure -bg white}
bind .drop_target <<Drop>> {%W configure -text %D; %W configure -bg white}

Now, if we want to also add the ability to receive file drops, we could add:

tkdnd::drop_target register .drop_target DND_Files
bind .drop_target <<Drop:DND_Files>> \
   {puts %D; %W configure -bg white}

SPECIFYING DRAG SOURCES

tkdnd::drag_source register .text_drag_source

bind .text_drag_source <<DragInitCmd>> \
     {list {copy move} DND_Text {Hello from Tk!}}

BUGS

KEYWORDS

Index

NAME

SYNOPSIS

INTRODUCTION

SUPPORTED TYPES

EVENTS

DROP TARGET EVENTS

DRAG SOURCE EVENTS

BINDING SCRIPTS AND SUBSTITUTIONS

SPECIFYING DROP TARGETS

SPECIFYING DRAG SOURCES

BUGS

KEYWORDS