[comment {Copyright (c) 2002-2003 Christian Krone. See the file "license.terms" for information on usage and redistribution of this file, and for a DISCLAIMER OF ALL WARRANTIES. $Id: treectrl.man,v 1.20 2005/05/27 20:05:13 treectrl Exp $} ][manpage_begin treectrl n 2.0] [moddesc {Tk Commands}] [titledesc {Create and manipulate hierarchical multicolumn widgets}] [require treectrl 2.0] [description] [list_begin definitions] [call [cmd treectrl] [arg pathName] [opt [arg options]]] [list_end] [para] The [cmd treectrl] command creates a new window (given by the [arg pathName] argument) and makes it into a treectrl widget. Additional options, described above, may be specified on the command line or in the option database to configure aspects of the treectrl such as its background color and relief. The [cmd treectrl] command returns the path name of the new window. At the time this command is invoked, there must not exist a window named [arg pathName], but [arg pathName]'s parent must exist. [para] A treectrl is a widget which displays items one per line. Every item has a set of states, which are boolean properties. The item may be spread about one or more columns. For each column of an item there is a style associated, which determines how to display the item's column respecting the item's current state set. One column can be defined to display the data in a hierarchical structure. [para] Normally the origin of the coordinate system is at the upper-left corner of the window containing the treectrl. It is possible to adjust the origin of the coordinate system relative to the origin of the window using the [cmd xview] and [cmd yview] widget commands; this is typically used for scrolling. [para] A treectrl widget can be horizontal or vertical oriented like many other Tk widgets. For displaying hierarchical data only vertical orientation is useful, since only then the children of an item are displayed directly below their parent. If the treectrl widget is used only to display data in a multicolumn listbox, the specification of an orientation will give useful results. [section {STANDARD OPTIONS}] [list_begin opt] [opt_def [option -background]] [opt_def [option -borderwidth]] [opt_def [option -cursor]] [opt_def [option -font]] [opt_def [option -highlightbackground]] [opt_def [option -highlightcolor]] [opt_def [option -highlightthickness]] [opt_def [option -orient]] [opt_def [option -relief]] [opt_def [option -takefocus]] [opt_def [option -xscrollcommand]] [opt_def [option -yscrollcommand]] [opt_def [option -foreground]] [list_end] See the [cmd option] manual entry for details on the standard options. [section {WIDGET SPECIFIC OPTIONS}] [list_begin tkoption] [tkoption_def -backgroundimage backgroundImage BackgroundImage] Specifies the name of an image to draw as the list background. The image is tiled horizontally and vertically to fill the content area of the list. If the image is transparent it is drawn on top of the background color(s). [tkoption_def -backgroundmode backgroundMode BackgroundMode] Specifies how the background color of items is chosen in each column. The value should be one of [const row], [const column], [const order], or [const ordervisible]. The default is [const row]. This option has only an effect for columns which have [option -itembackground] defined as list of two or more colors (see section [sectref COLUMNS] below for more on this). If [const row] or [const column] is specified, the background color is chosen based on the location of the item in the 1- or 2-dimensional grid of items as layed out on the screen; this layout of items is affected by the [option -orient] and [option -wrap] options as well as item visibility. When [const order] or [const ordervisible] is specified, the background color is chosen based on the result of the [cmd {item order}] command, regardless of the layout of items. [tkoption_def -buttonbitmap buttonBitmap ButtonBitmap] Specifies the bitmap to be used as the expand/collapse button to the left of an item. This is a per-state option (see [sectref {PER-STATE OPTIONS}]). If a bitmap is specified for a certain item state, it overrides the effects of -usetheme. [tkoption_def -buttoncolor buttonColor ButtonColor] Specifies the foreground color which should be used for drawing the outline and the plus or minus sign of the button to the left of an item. [tkoption_def -buttonimage buttonImage ButtonImage] Specifies the image to be used as the expand/collapse button to the left of an item. This is a per-state option (see [sectref {PER-STATE OPTIONS}]). If an image is specified for a certain item state, it overrides the effects of -buttonbitmap and -usetheme. [tkoption_def -buttonsize buttonSize ButtonSize] Specifies the diameter of the button drawn to the left of an item in any of the forms acceptable to [fun Tk_GetPixels]. [tkoption_def -buttonthickness buttonThickness ButtonThickness] Specifies the width of the outline and the plus or minus sign of the button to the left of an item in any of the forms acceptable to [fun Tk_GetPixels]. [tkoption_def -columnprefix columnPrefix ColumnPrefix] Specifies an ascii string that changes the way column ids are reported and processed. If this option is a non-empty string, the usual integer value of a column id is prefixed with the given string. This can aid debugging but it is important your code doesn't assume column ids are integers if you use it. [tkoption_def -columnproxy columnProxy ColumnProxy] If this option specifies a non empty value, it should be a screen distance in any of the forms acceptable to [fun Tk_GetPixels]. Then a 1 pixel thick vertical line will be drawn at the specified screen distance from the left edge of the treectrl widget, which reaches from top to bottom of the treectrl widget and uses an inverting color (i.e black on lighter background, white on darker background). This line can be used to give the user a visual feedback during column resizing. [tkoption_def -columnresizemode columnResizeMode ColumnResizeMode] Specifies the visual feedback used when resizing columns. The value should be one of [const proxy] or [const realtime]. For [const proxy], a 1-pixel thick vertical line is drawn representing where the right edge of the column will be after resizing. For [const realtime], the column's size is changed while the user is dragging the right edge of the column. [tkoption_def -defaultstyle defaultStyle DefaultStyle] Specifies a list of styles, one per column, to apply to each item created by the [cmd "item create"] command. The number of styles in the list can be different from the number of tree columns. Each list element should be a valid style name or an empty string to indicate no style should be applied to a specific column. The list of styles is updated if a style is deleted or if a column is moved. [tkoption_def -doublebuffer doubleBuffer DoubleBuffer] Specifies if double-buffering should be used to improve displaying. The value should be one of [const none], [const window], or [const item]. For [const none] no double-buffering is used at all, which may be most memory efficient, but will probably generate some flickering on the screen. For [const window] the complete tree is double-buffered, which requires a buffer big enough to contain the complete widget. For [const item], which is the default, every item is separately double-buffered, so it works with a buffer size as big as the biggest item. [tkoption_def -height height Height] Specifies the desired height for the window in any of the forms acceptable to [fun Tk_GetPixels]. The default is 200 pixel. If this option is less than or equal to zero then the window will not request any size at all. [tkoption_def -indent indent Indent] Specifies the amount of indentation in any of the forms acceptable to [fun Tk_GetPixels]. The default is 19 pixel. Indentation is the screen distance an item is displayed more to the right than its father. [tkoption_def -itemheight itemHeight ItemHeight] Specifies a fixed height for every item in any of the forms acceptable to [fun Tk_GetPixels]. If non-zero, this option overrides the requested height of an item and the -minitemheight option. The default is 0, which means that every item has the height requested by the arrangement of elements in each column. Items are never shorter than the maximum height of a button. [tkoption_def -itemprefix itemPrefix ItemPrefix] Specifies an ascii string that changes the way item ids are reported and processed. If this option is a non-empty string, the usual integer value of an item id is prefixed with the given string. This can aid debugging but it is important your code doesn't assume item ids are integers if you use it. [tkoption_def -linecolor lineColor LineColor] Specifies the color which should be used for drawing the connecting lines between related items. [tkoption_def -linestyle lineStyle LineStyle] Specifies the style of the connecting lines between related items, should be [const dot] which is the default, or [const solid]. [tkoption_def -linethickness lineThickness LineThickness] Specifies the thickness of the connecting lines between related items in any of the forms acceptable to [fun Tk_GetPixels]. [tkoption_def -minitemheight minItemHeight MinItemHeight] Specifies a minimum height for every item in any of the forms acceptable to [fun Tk_GetPixels]. The default is 0, which means that every item has the height requested by the arrangement of elements in each column. This option has no effect if the -itemheight option is specified. Items are never shorter than the maximum height of a button. [tkoption_def -scrollmargin scrollMargin ScrollMargin] The interpretation of this option is left to Tcl scripts that implement scrolling: the widget implementation ignores this option entirely. Defaults to 0. [tkoption_def -selectmode selectMode SelectMode] Specifies one of several styles for manipulating the selection. The value of the option may be arbitrary, but the default bindings expect it to be either [const single], [const browse], [const multiple], or [const extended]; the default value is [const browse]. [tkoption_def -showbuttons showButtons ShowButtons] Specifies a boolean value that determines whether this widget displays a button to the left of any item. If the button is actually drawn can be configured for every item with the [cmd {item hasbutton}] widget command, but if this option is set to false, the configuration of an item has no effect. The default value is true. [tkoption_def -showheader showHeader ShowHeader] Specifies a boolean value that determines whether this widget should display the header line with the column names at the top of the widget. The default value is true. [tkoption_def -showlines showLines ShowLines] Specifies a boolean value that determines whether this widget should draw the connecting lines between related items. The default value is true. [tkoption_def -showroot showRoot ShowRoot] Specifies a boolean value that determines whether this widget should draw the root item. By suppressing the drawing of the root item the widget can have multiple items that appear as [emph toplevel] items. The default value is true. [tkoption_def -showrootbutton showRootButton ShowRootButton] Specifies a boolean value that determines whether this widget should draw a button before the root item. The default value is false. [tkoption_def -showrootlines showRootLines ShowRootLines] Specifies a boolean value that determines whether this widget should draw the connecting lines between children of the root item. The default value is true. [tkoption_def -treecolumn treeColumn TreeColumn] Specifies an integer value that determines which column displays the data in an hierarchical fashion. Default is 0 meaning that the first column displays the tree. [tkoption_def -usetheme useTheme UseTheme] Specifies a boolean value that determines whether this widget should draw parts of itself using a platform-specific theme manager. The default is false. [tkoption_def -width width Width] Specifies the desired width for the window in any of the forms acceptable to [fun Tk_GetPixels]. The default is 200 pixel. If this option is less than or equal to zero then the window will not request any size at all. [tkoption_def -wrap wrap Wrap] Specifies how to arrange items inside treectrl's window. The value must be an empty string, [const window], or a list with an integer as first element and either [const items] or [const pixels] as second element. The empty string as wrap mode means that each item appears on exactly one line on the screen. In the other modes multiple items may be displayed in one screen line. In [const window] mode a screen line break may occur after any element; in [const items] mode a line break will only be made after the specified number of items; in [const pixels] mode a line break will only be made after the specified screen distance is reached. [tkoption_def -xscrolldelay xScrollDelay ScrollDelay] Specifies the amount of time before the default binding should handle repeating mouse motion events in horizontal direction with button 1 pressed. The value should be a list of 1 or 2 integers. The first integer specifies the timespan in microseconds before the active item should be changed to get nearer to the current mouse position. If there are two integers specified, the first is only used for the first motion event, any repeating motion events are handled after the seconds amount of miliseconds is elapsed. [tkoption_def -xscrollincrement xScrollIncrement ScrollIncrement] Specifies an increment for horizontal scrolling, in any of the usual forms permitted for screen distances. If the value of this option is greater than zero, the horizontal view in the window will be constrained so that the x coordinate at the left edge of the window is always an even multiple of [option -xscrollincrement]; furthermore, the units for scrolling (e.g., the change in view when the left and right arrows of a scrollbar are selected) will also be [option -xscrollincrement]. If the value of this option is less than or equal to zero, then horizontal scrolling is unconstrained. [tkoption_def -yscrolldelay yScrollDelay ScrollDelay] Specifies the amount of time before the default binding should handle repeating mouse motion events in vertical direction with button 1 pressed. The value should be a list of 1 or 2 integers. The first integer specifies the timespan in microseconds before the active item should be changed to get nearer to the current mouse position. If there are two integers specified, the first is only used for the first motion event, any repeating motion events are handled after the seconds amount of miliseconds is elapsed. [tkoption_def -yscrollincrement yScrollIncrement ScrollIncrement] Specifies an increment for vertical scrolling, in any of the usual forms permitted for screen distances. If the value of this option is greater than zero, the vertical view in the window will be constrained so that the y coordinate at the top edge of the window is always an even multiple of [option -yscrollincrement]; furthermore, the units for scrolling (e.g., the change in view when the top and bottom arrows of a scrollbar are selected) will also be [option -yscrollincrement]. If the value of this option is less than or equal to zero, then vertical scrolling is unconstrained. [list_end] [section {WIDGET COMMAND}] The [cmd treectrl] command creates a new Tcl command whose name is the same as the path name of the treectrl's window. This command may be used to invoke various operations on the widget. It has the following general form: [para] [arg pathName] [arg option] [opt [arg {arg arg ...}]] [para] [arg PathName] is the name of the command, which is the same as the treectrl widget's path name. [arg Option] and the [arg arg]s determine the exact behavior of the command. The following commands are possible for treectrl widgets: [list_begin definitions] [call [arg pathName] [cmd activate] [arg itemDesc]] Sets the active item to the one described by [arg itemDesc], and switches on the state [const active] for this item. From now on the item can be retrieved with the item description [const active]. An [const ] event is generated. [call [arg pathName] [cmd canvasx] [arg screenx]] Given a window x-coordinate in the treectrl [arg screenx], this command returns the treectrl x-coordinate that is displayed at that location. [call [arg pathName] [cmd canvasy] [arg screeny]] Given a window y-coordinate in the treectrl [arg screeny], this command returns the treectrl y-coordinate that is displayed at that location. [call [arg pathName] [cmd cget] [arg option]] Returns the current value of the configuration option given by [arg option]. [arg Option] may have any of the values accepted by the [cmd tree] command. [call [arg pathName] [cmd collapse] [opt [option -recurse]] \ [opt [arg {itemDesc ...}]]] Use [cmd {item collapse}] instead. [call [arg pathName] [cmd column] [arg option] [arg column] \ [opt [arg {arg ...}]]] This command is used to manipulate the columns of the treectrl widget (see section [sectref COLUMNS] below). The exact behavior of the command depends on the [arg option] argument that follows the [cmd column] argument. The following forms of the command are supported: [list_begin definitions] [call [arg pathName] [cmd {column bbox}] [arg column]] Returns a list with four elements giving an approximate bounding box for the column header specified by [arg column]. If the treectrl is configured to don't display the column headers by means of the [option -showheader] option, an empty list is returned instead. [call [arg pathName] [cmd {column cget}] [arg column] [arg option]] This command returns the current value of the option named [arg option] for the column specified by [arg column], [arg Column] may also be the string [const tail] to specify the tail column. [arg Option] may have any of the values accepted by the [cmd {column configure}] widget command. [call [arg pathName] [cmd {column configure}] [arg column] \ [opt [arg option]] [opt [arg value]] [opt [arg {option value ...}]]] This command is similar to the [cmd configure] widget command except that it modifies options associated with the column specified by [arg column] instead of modifying options for the overall treectrl widget. [arg Column] may be the string [const tail] to specify the tail column. If [arg column] is the string [const all], at least one option-value pair must be given; in this case all the columns are configured. If no [arg option] is specified, the command returns a list describing all of the available options for [arg column] (see [fun Tk_ConfigureInfo] for information on the format of this list). If [arg option] is specified with no [arg value], then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no [arg option] is specified). If one or more [arg option]-[arg value] pairs are specified, then the command modifies the given option(s) to have the given value(s) for [arg column]; in this case the command returns an empty string. [nl] See [sectref COLUMNS] below for details on the options available for columns. [call [arg pathName] [cmd {column compare}] [arg column1] [arg op] [arg column2]] From both [arg column]s the index is retrieved (as returned from the [cmd {column order}] widget command). Then these indexes are compared using the operator [arg op], which must be either [const <], [const <=], [const ==], [const >=], [const >], or [const !=]. The return value of this command is 1 if the comparison evaluated to true, 0 otherwise. [call [arg pathName] [cmd {column count}]] Returns a decimal string giving the number of columns created by the [cmd "column create"] widget command which haven't been deleted by the [cmd "column delete"] widget command. The [const tail] column is not counted. [call [arg pathName] [cmd {column create}] [opt [arg {option value ...}]]] This command creates a new column in the treectrl widget. The new column is placed to the right of all other columns (except the [const tail] column). Any [arg option]-[arg value] arguments configure the new column according to the [cmd "column configure"] command. The return value is the unique identifier of the new column. [call [arg pathName] [cmd {column delete}] [arg column]] Deletes the specified [arg column] from the treectrl widget. If [arg column] is the string [const all], all columns except the tail column are deleted. [call [arg pathName] [cmd {column dragcget}] [arg option]] [call [arg pathName] [cmd {column dragconfigure}] \ [opt [arg option]] [opt [arg value]] [opt [arg {option value ...}]]] The user can move a column within a treectrl by drag-and-drop. Feedback consists of a semi-transparent photo image of the header of the column being dragged and a 2-pixel-thick vertical line to indicate where the column may be dropped. The drag image consists of a colored background rectangle plus the image and/or text displayed in the column header. The 2-pixel-thick line will be drawn over the left edge of the column before which the dragged column may be dropped. [nl] The library scripts generate a event when the user has successfully drag-and-drop'd a column. You will have to bind a script to this event if you want to move the dragged column. [nl] The following configuration options are supported: [list_begin opt] [opt_def [option -enable] [arg boolean]] Controls whether the user is allowed to rearrange columns by drag-and-drop. [opt_def [option -imagealpha] [arg alpha]] [arg Alpha] is an integer from 0 (invisible) to 255 (opaque) controlling the transparency of the drag image. Any value outside this range is clipped. [opt_def [option -imagecolor] [arg background]] [arg Background] is the color of the drag image background rectangle. [opt_def [option -imagecolumn] [arg column]] [arg Column] specifies the column to create the drag image from. [opt_def [option -imageoffset] [arg offset]] [arg Offset] is the horizontal screen distance the drag image is offset from its starting position. [opt_def [option -indicatorcolor] [arg color]] [arg Color] is the color of the 2-pixel-thick line. [opt_def [option -indicatorcolumn] [arg column]] The 2-pixel-thick line will be drawn over the left edge of [arg column]. [list_end] [call [arg pathName] [cmd {column index}] [arg column]] Deprecated. Use [cmd {column id}] instead. [call [arg pathName] [cmd {column id}] [arg column]] This command resolves the column description [arg column] into a unique column identifier (see [sectref {COLUMN DESCRIPTION}] below). If the column described by [arg column] doesn't exist, this command returns an empty string. [call [arg pathName] [cmd {column list}] [opt [arg -visible]]] This command returns a list of identifiers for every column (except the tail) from left to right. If [arg -visible] is given, only columns whose -visible option is true are returned. [call [arg pathName] [cmd {column move}] [arg column] [arg before]] Moves the specified [arg column] to the left of the column specified by [arg before]. If [arg before] is the string [const tail], the column [arg column] will become the last column. [call [arg pathName] [cmd {column neededwidth}] [arg column]] This command returns a decimal string giving the needed width of the column specified by [arg column]. The needed width is the maximum of the width of the column header and the width of the [emph widest] currently visible item. [call [arg pathName] [cmd {column order}] [arg column] [opt [arg -visible]]] This command returns a decimal string giving the position of [arg column] in the list of columns starting from zero for the leftmost column. If [arg -visible] is given, only columns whose -visible option is true are considered, and -1 is returned if [arg column]'s -visible option is false. [call [arg pathName] [cmd {column width}] [arg column]] This command returns a decimal string giving the width in pixels of the column specified by [arg column], even if the treectrl is configured to not display the column headers by means of the [option -showheader] option. [list_end] [call [arg pathName] [cmd compare] [arg itemDesc1] [arg op] [arg itemDesc2]] Deprecated. Use the [cmd {item compare}] command instead. [call [arg pathName] [cmd configure] [opt [arg option]] \ [opt [arg {value option value ...}]]] Query or modify the configuration options of the widget. If no [arg option] is specified, returns a list describing all of the available options for [arg pathName] (see [fun Tk_ConfigureInfo] for information on the format of this list). If [arg option] is specified with no [arg value], then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no [arg option] is specified). If one or more [arg option]-[arg value] pairs are specified, then the command modifies the given widget option(s) to have the given value(s); in this case the command returns an empty string. [arg Option] may have any of the values accepted by the [cmd treectrl] command. [call [arg pathName] [cmd contentbox]] Returns a list with four elements giving an approximate bounding box for the space used to display the items inside the columns, i.e. the space of the treectrl widget without the surrounding borders and the column headers. [call [arg pathName] [cmd debug] [arg option] [opt [arg {arg arg ...}]]] This command is used to facilitate debugging of the treectrl widget. The exact behavior of the command depends on the [arg option] argument that follows the [cmd debug] argument. The following forms of the command are supported: [list_begin definitions] [call [arg pathName] [cmd {debug cget}] [arg element] [arg option]] This command returns the current value of the debugging option named [arg option]. [arg Option] may have any of the values accepted by the [cmd {debug configure}] widget command. [call [arg pathName] [cmd {debug configure}] [arg element] \ [opt [arg option]] [opt [arg value]] [opt [arg {option value ...}]]] This command is similar to the [cmd configure] widget command except that it modifies debugging options instead of modifying options for the overall treectrl widget. If no [arg option] is specified, the command returns a list describing all of the available debugging options (see [fun Tk_ConfigureInfo] for information on the format of this list). If [arg option] is specified with no [arg value], then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no [arg option] is specified). If one or more [arg option]-[arg value] pairs are specified, then the command modifies the given debugging option(s) to have the given value(s); in this case the command returns an empty string. [nl] The following debugging options are supported: [list_begin opt] [opt_def [option -displaydelay] [arg millis]] Specifies a time duration in milliseconds, which should be waited after something has been drawn to the screen. Setting this option has only an effect, if the debugging options [option -enable] and [option -display] are switched on. [opt_def [option -data] [arg boolean]] If this option is switched on (together with the debugging option [option -enable]), at various places a consistence check on the internal data structure is made (e.g. for every item is checked, if the registered number of children is equal to the number of child items). If an inconsistency was found, a Tcl background error is raised. [opt_def [option -display] [arg boolean]] If this option is switched on (together with the debugging option [option -enable]), at varios places additional debugging output is printed to stdout. [opt_def [option -enable] [arg boolean]] All other debugging options only take effect, if this option is also switched on. [opt_def [option -erasecolor] [arg color]] Use this color, when parts of the treectrl widget should be deleted. If you use an unusual color for this option (like [const pink]), superflous screen redraws can be spotted more easily. Setting this option has only an effect, if the debugging options [option -enable] and [option -display] are switched on. [list_end] [call [arg pathName] [cmd {debug dinfo}]] For every of the treectrl widget a line with some internal valuess info about all items is printed to stdout. The command returns the empty string. [call [arg pathName] [cmd {debug scroll}]] Returns a string useful for debugging vertical scrolling. [list_end] [call [arg pathName] [cmd depth] [opt [arg itemDesc]]] If the additional argument [arg itemDesc] is specified, returns a decimal string giving the depth of the item describing by [arg itemDesc], whereas depth is defined as the number of steps you must go upward to reach to root item. If no [arg itemDesc] is specified, the maximum depth of all items in the treectrl widget is returned instead. [call [arg pathName] [cmd dragimage] [arg option] [opt [arg {arg ...}]]] This command is used to manipulate the dragimage, one or more dotted lines around rectangular regions of the treectrl widget. The exact behavior of the command depends on the [arg option] argument that follows the [cmd dragimage] argument. The following forms of the command are supported: [list_begin definitions] [call [arg pathName] [cmd {dragimage add}] [arg itemDesc] \ [opt [arg column]] [opt [arg element]]] Adds the shapes of the item described by [arg itemDesc] to the shapes of the dragimage. Specifying additional arguments reduces the number of rectangles that are added to the dragimage. If no additional arguments is specified, for every element of the item in every column a dotted rectangles is added. If [arg column] is specified, all elements in other columns are ignored. If also [arg element] is specified, only a rectangle for this one element of the specified item in the given column is added. [call [arg pathName] [cmd {dragimage cget}] [arg option]] This command returns the current value of the dragimage option named [arg option]. [arg Option] may have any of the values accepted by the [cmd {dragimage configure}] widget command. [call [arg pathName] [cmd {dragimage clear}]] Removes all shapes (if there are any) from the dragimage. This command does not modify the dragimage offset. [call [arg pathName] [cmd {dragimage configure}] [opt [arg option]] \ [opt [arg value]] [opt [arg {option value ...}]]] This command is similar to the [cmd configure] widget command except that it modifies the dragimage options instead of modifying options for the overall treectrl widget. If no [arg option] is specified, the command returns a list describing all of the available dragimage options (see [fun Tk_ConfigureInfo] for information on the format of this list). If [arg option] is specified with no [arg value], then the command returns a list describing the one named dragimage option (this list will be identical to the corresponding sublist of the value returned if no [arg option] is specified). If one or more [arg option]-[arg value] pairs are specified, then the command modifies the given dragimage option(s) to have the given value(s); in this case the command returns an empty string. [nl] The following dragimage options are supported: [list_begin opt] [opt_def [option -visible] [arg boolean]] Specifies a boolean value which determines whether the dragimage should currently be visible. [list_end] [call [arg pathName] [cmd {dragimage offset}] [opt [arg {x y}]]] Returns a list containing the x and y offsets of the dragimage, if no additional arguments are specified. The dragimage offset is the screen distance, the image is displayed relative to the item its shape is derived from. If two coordinates are specified, sets the dragimage offset to the given coordinates [arg x] and [arg y]. [list_end] [call [arg pathName] [cmd element] [arg option] [opt [arg element]] \ [opt [arg {arg arg ...}]]] This command is used to manipulate elements (see [sectref ELEMENTS] below). The exact behavior of the command depends on the [arg option] argument that follows the [cmd element] argument. The following forms of the command are supported: [list_begin definitions] [call [arg pathName] [cmd {element cget}] [arg element] [arg option]] This command returns the current value of the option named [arg option] associated with the element given by [arg element]. [arg Option] may have any of the values accepted by the [cmd {element configure}] widget command. [call [arg pathName] [cmd {element configure}] [arg element] \ [opt [arg option]] [opt [arg value]] [opt [arg {option value ...}]]] This command is similar to the [cmd configure] widget command except that it modifies options associated with the element given by [arg element] instead of modifying options for the overall treectrl widget. If no [arg option] is specified, the command returns a list describing all of the available options for [arg element] (see [fun Tk_ConfigureInfo] for information on the format of this list). If [arg option] is specified with no [arg value], then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no [arg option] is specified). If one or more [arg option]-[arg value] pairs are specified, then the command modifies the given option(s) to have the given value(s) in [arg element]; in this case the command returns an empty string. See [sectref ELEMENTS] below for details on the options available for elements. [call [arg pathName] [cmd {element create}] [arg element] [arg type] \ [opt [arg {option value ...}]]] Create a new elememt in [arg pathName] of type [arg type] with name [arg element]. The exact format of the arguments after [arg type] depends on [arg type], but generally consist of specifications for zero or more element options. See the subsections on individual element types below for more on the syntax of this command. This command returns the name for the new element. [call [arg pathName] [cmd {element delete}] [opt [arg {element ...}]]] Deletes each of the named elements and returns an empty string. If an element is deleted while it is still configured as an element of one or more styles by means of the [cmd {style elements}] widget command, it is also removed from the element lists of these styles. [call [arg pathName] [cmd {element names}]] Returns a list containing the names of all existing elements. [call [arg pathName] [cmd {element type}] [arg element]] Returns the type of the elements given by [arg element], such as [const rect] or [const text]. [list_end] [call [arg pathName] [cmd expand] [opt [option -recurse]] \ [opt [arg {itemDesc ...}]]] Use [cmd {item expand}] instead. [call [arg pathName] [cmd identify] [arg x] [arg y]] Returns a list containing some diagnostics about what is displayed at the given windows coordinates [arg x] and [arg y]. The resulting list may be empty, if nothing is displayed at the given coordinates, otherwise the first list element is [const header] or [const item]. [nl] If the coordinates are in the header area and thus the first element of the result is [const header], the number of the column or the string [const tail] is the second element in the resulting list; if the x coordinate is near the left or right end of the header, a third element [const left] or [const right] is added respectively. [nl] If the coordinates are below the header area and thus the first element of the result is [const item], the numerical id of the item is the second element in the resulting list. If the x coordinate doesn't fall into the column displaying the hierarchical structure, the elements [const column] and the column number are added. If the x coordinate is within the column displaying the hierarchical structure, the following elements are added to the resulting list: [const line] and the numerical id of the item the line comes from, if the x coordinate is above an item connecting line; [const button], if the x coordinate is above a button; [const column], the column number, [const elem], and the element name, if the x coordinate is above an element of the item; [const column] and the column number, if the x coordinate is to the right of the elements; nothing otherwise. [call [arg pathName] [cmd index] [arg itemDesc]] Deprecated. Use [cmd {item id}] instead. [call [arg pathName] [cmd item] [arg option] [opt [arg {arg ...}]]] This command is used to manipulate items. The exact behavior of the command depends on the [arg option] argument that follows the [cmd item] argument. The following forms of the command are supported: [list_begin definitions] [call [arg pathName] [cmd {item ancestors}] [arg itemDesc]] Returns a list containing the numerical indexes of all ancestors of the item specified by [arg itemDesc] from its parent up to the root item. [call [arg pathName] [cmd {item bbox}] [arg itemDesc] [opt [arg column]] \ [opt [arg element]]] Returns a list with four elements giving an approximate bounding box for the item described by [arg itemDesc]. If no further argument is specified, the bbox spans the area of the item over all columns. If a [arg column] is specified, only the area of the item in this column is considered, if an additional [arg element] is specified, the area of this [arg element] in [arg column] of the specified item is returned. [call [arg pathName] [cmd {item cget}] [arg itemDesc] [arg option]] Returns the current value of the configuration option for the item specified by [arg itemDesc] whose name is [arg option]. [arg Option] may have any of the values accepted by the [cmd "item create"] command when the item was created. [call [arg pathName] [cmd {item children}] [arg itemDesc]] Returns a list containing the numerical indexes of all children of the item specified by [arg itemDesc] in the correct order from the first child to the last child. [call [arg pathName] [cmd {item collapse}] [arg itemDesc] [opt [option -recurse]]] Switches off the [const open] state of the item(s) described by [arg itemDesc]. If the item has descendants, they are no longer displayed. If the item is configured to have a button, the button will now display the image or bitmap configured with the widget options [option -closedbuttonimage] or [option -closedbuttonbitmap], or a [emph +] sign if no image or bitmap is configured. If the item is already closed, this command has no effect. [arg ItemDesc] may also be the string [const all], in which case all items of the treectrl widget are collapsed. If [option -recurse] is specified, all descendants of [arg itemDesc] will also be collapsed. For every item, that actually will be collapsed, two events are generated: a [const ] event before the item state is changed, and a [const ] event after the item state was changed. [call [arg pathName] [cmd {item compare}] [arg itemDesc1] [arg op] [arg itemDesc2]] From both items described by the [arg itemDesc]s the index is retrieved (as returned from the [cmd {item order}] widget command). Then these indexes are compared using the operator [arg op], which must be either [const <], [const <=], [const ==], [const >=], [const >], or [const !=]. The return value of this command is 1 if the comparison evaluated to true, 0 otherwise. [call [arg pathName] [cmd {item complex}] [arg itemDesc] [arg list] [arg ...]] Modifies the elements of the item described by [arg itemDesc]. For every column of the treectrl there may be specified one [arg list], which in turn is an odd elemented list with at least three elements: the name of an element followed by [arg option]-[arg value] pairs. Every [arg option] must be known by the element's type (see [sectref ELEMENTS] below). The corresponding [arg value] will overwrite the value of the element for this one column in this item. [call [arg pathName] [cmd {item configure}] [arg itemDesc] [opt [arg option]] [opt [arg value]] [opt [arg {option value ...}]]] If no [arg option] is specified, returns a list describing all of the available options for the item given by [arg itemDesc] (see [fun Tk_ConfigureInfo] for information on the format of this list). If [arg option] is specified with no value, then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no [arg option] is specified). If one or more [arg option]-[arg value] pairs are specified, then the command modifies the given widget option(s) to have the given value(s); in this case the command returns an empty string. The options and values are the same as those permissible in the [cmd "item create"] command when the item was created. [call [arg pathName] [cmd {item count}]] Returns a decimal string giving the number of items created by the [cmd "item create"] widget command which haven't been deleted by the [cmd "item delete"] widget command, plus 1 for the ever-present root item. [call [arg pathName] [cmd {item create}] [opt [arg {option value ...}]]] Creates a new item and returns its unique identifier. The new item has the states [const open] and [const enabled] set by default. If the treectrl widget currently has the focus, the state [const focus] is also set. Each [arg option]-[arg value] pair sets one of the configuration options for the item. These same [arg option]-[arg value] pairs may be used in the [cmd "item configure"] command to change the item's configuration. [nl] The following options are supported by items: [list_begin opt] [opt_def [option -button] [arg boolean]] [arg Boolean] must have one of the forms accepted by [fun Tk_GetBoolean]. It indicates whether or not an expand/collapse button should be drawn next to this item, typically to indicate the item has children. The button will only be displayed if: a) the column specified by the widget option [option -treecolumn] is visible; and b) the widget option [option -showbuttons] is true [opt_def [option -visible] [arg boolean]] [arg Boolean] must have one of the forms accepted by [fun Tk_GetBoolean]. It indicates that the item should be displayed in the list. The item will only be displayed if: a) each ancestor is a descendant of the root item (not an orphan); and b) each ancestor's [option -visible] option is true [list_end] [call [arg pathName] [cmd {item delete}] [arg first] [opt [arg last]]] Deletes the specified item(s). [arg First] and [arg last] must be the string [const all] or an [arg itemDesc]. If either [arg first] or [arg last] is specified as [const all], all items are deleted; if [arg first] is specified as [arg itemDesc] and [arg last] isn't specified, the item described by [arg first] is deleted. If both [arg first] and [arg last] are specified, they must decribe items with a common ancestor; then the range of items between [arg first] and [arg last] is deleted. [nl] Deleting an item deletes any child items of the deleted item recursively. If the current [const active] item is deleted, the root item becomes the new active item. If the current selection [const anchor] item is deleted, the root item becomes the new anchor item. There is no way to delete the root item of the treectrl widget; in all cases the specification of the root item is ignored. [call [arg pathName] [cmd {item dump}] [arg itemDesc]] Returns a list with six elements in the form [const index] [emph index] [const indexVis] [emph indexVis] [const neededHeight] [emph neededHeight]. [call [arg pathName] [cmd {item element}] [arg command] [arg itemDesc] \ [arg column] [arg element] [opt [arg {arg ...}]]] This command is used to manipulate elements of the item. The exact behavior of the command depends on the [arg command] argument that follows the [cmd element] argument. The following forms of the command are supported: [list_begin definitions] [call [arg pathName] [cmd {item element actual}] [arg itemDesc] [arg column] \ [arg element] [arg option]] This command returns the current value of the configuration option named [arg option] associated with [arg element] inside [arg column] of the item described by [arg itemDesc]. If [arg option] was configured using the [cmd "item element configure"] command, the return value is the same as if the [cmd {item element cget}] command was used. Otherwise the value of the configuration option of the underlying element is returned. [arg Option] may have any of the values accepted by the type of the specified element (see [sectref ELEMENTS] below) [call [arg pathName] [cmd {item element cget}] [arg itemDesc] [arg column] \ [arg element] [arg option]] This command returns the value of the option named [arg option] associated with [arg element] inside [arg column] of the item described by [arg itemDesc], if it was already configured for the actual item. [arg Option] may have any of the values accepted by the type of the specified element (see [sectref ELEMENTS] below) [call [arg pathName] [cmd {item element configure}] [arg itemDesc] \ [arg column] [arg element] [opt [arg option]] [opt [arg value]] \ [opt [arg {option value ...}]]] This command is similar to the [cmd configure] widget command except that it modifies options associated with [arg element] inside [arg column] of the item described by [arg itemDesc] instead of modifying options for the overall treectrl widget. If no [arg option] is specified, the command returns a list describing all of the available options for the element (see [fun Tk_ConfigureInfo] for information on the format of this list). If [arg option] is specified with no [arg value], then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no [arg option] is specified). If one or more [arg option]-[arg value] pairs are specified, then the command modifies the given option(s) to have the given value(s) in the [arg element] inside [arg column] of the item described by [arg itemDesc]; in this case the command returns an empty string. [list_end] [call [arg pathName] [cmd {item expand}] [arg itemDesc] [opt [option -recurse]]] Switches on the [const open] state of the item(s) described by [arg itemDesc]. If the item has descendants, they are now displayed. If the item is configured to have a button, the button will now display the image or bitmap configured with the widget options [option -openbuttonimage] or [option -openbuttonbitmap], or a [emph -] sign if no image or bitmap is configured. If the item is already open, this command has no effect. [arg ItemDesc] may also be the string [const all], in which case all items of the treectrl widget are expanded. If [option -recurse] is specified, all descendants of [arg itemDesc] will also be expanded. For every item, that actually will be expanded, two events are generated: an [const ] event before the item state is changed, and an [const ] event after the item state was changed. [call [arg pathName] [cmd {item firstchild}] [arg parent] [opt [arg child]]] If [arg child] is not specified, returns the numerical index of the first child of the item described by [arg parent]. If [arg child] is specified, it must described an item that is not an ancestor of [arg parent]. Then it will become the new first child of [arg parent]. [call [arg pathName] [cmd {item id}] [arg itemDesc]] This command resolves the item description [arg itemDesc] into a unique item identifier (see [sectref {ITEM DESCRIPTION}] below). If the item described by [arg itemDesc] doesn't exist, this command returns an empty string. [call [arg pathName] [cmd {item isancestor}] [arg itemDesc] [arg descendant]] Returns 1 if the item described by [arg itemDesc] is a direct or indirect parent of the item decribed by [arg descendant], 0 otherwise. [call [arg pathName] [cmd {item isopen}] [arg itemDesc]] Returns 1, if the item described by [arg itemDesc] has cuurently the state [const open] switched on, 0 otherwise. [call [arg pathName] [cmd {item lastchild}] [arg parent] [opt [arg child]]] If [arg child] is not specified, returns the numerical index of the last child of the item described by [arg parent]. If [arg child] is specified, it must described an item that is not an ancestor of [arg parent]. Then it will become the new last child of [arg parent]. [call [arg pathName] [cmd {item nextsibling}] [arg sibling] [opt [arg next]]] If [arg next] is not specified, returns the numerical index of the next sibling of the item described by [arg sibling]. If [arg next] is specified, it must described an item that is not an ancestor of [arg sibling]. Then it will become the new next sibling of [arg sibling]. [call [arg pathName] [cmd {item numchildren}] [arg itemDesc]] Returns the number of children of the item described by [arg itemDesc]. [call [arg pathName] [cmd {item order}] [arg itemDesc] [opt [arg -visible]]] This command returns the position of the item [arg itemDesc] relative to its toplevel ancestor (usually the root item, unless the ancestor is an orphan). If you imagine all the items flattened into a vertical list, the result of this command is the row the item falls in. If the optional argument [arg -visible] is given, only the items whose ancestors are expanded, and whose -visible option is true, get counted; in this case -1 is returned if the item is not visible. [call [arg pathName] [cmd {item parent}] [arg itemDesc]] Returns the numerical index of the parent of the item described by [arg itemDesc]. [call [arg pathName] [cmd {item prevsibling}] [arg sibling] [opt [arg prev]]] If [arg prev] is not specified, returns the numerical index of the previous sibling of the item described by [arg sibling]. If [arg prev] is specified, it must described an item that is not an ancestor of [arg sibling]. Then it will become the new previous sibling of [arg sibling]. [call [arg pathName] [cmd {item remove}] [arg itemDesc]] Removes the item described by [arg itemDesc] from the children list of its father, so that it will become an orphan. [call [arg pathName] [cmd {item rnc}] [arg itemDesc]] Returns a list of two integers, which corresponds to the row and column of the item described by [arg itemDesc]. [call [arg pathName] [cmd {item sort}] [arg itemDesc] [opt [arg {option ...}]]] Sorts the children of the item described by [arg itemDesc], and redisplays the tree with the items in the new order. [nl] The range of items which should be sorted can be restricted by means of the [option -first] and/or [option -last] options, which should be children of the item described by [arg itemDesc]; the order between these two limiting items doesn't matter. [nl] The sort column can be specified by means of the [option -column] option; this option can be used repeatedly to define a multicolumn sort. The sorting is done by looking at the [arg text] of the element specified by the [option -element] option, which must be a text element defined in the style of the sorting column, by default the first text element is used. [nl] If the [option -notreally] option is specified, no rearranging of the items is done; instead the sorted items are returned as result of the command. [nl] By default ASCII sorting is used with the result returned in increasing order. Any of the following options may be specified to control the sorting process of the previously specified column (unique abbreviations are accepted): [list_begin opt] [opt_def [option -ascii]] Use string comparison with ASCII collation order. This is the default. [opt_def [option -command] [arg command]] Use [arg command] as a comparison command. To compare two items, evaluate a Tcl script consisting of [arg command] with the numerical ids of the two items appended as additional arguments. The script should return an integer less than, equal to, or greater than zero if the first item is to be considered less than, equal to, or greater than the second, respectively. [opt_def [option -decreasing]] Sort the items in decreasing order ("largest" items first). [opt_def [option -dictionary]] Use dictionary-style comparison. This is the same as [option -ascii] except (a) case is ignored except as a tie-breaker and (b) if two strings contain embedded numbers, the numbers compare as integers, not characters. For example, in [option -dictionary] mode, [term bigBoy] sorts between [term bigbang] and [term bigboy], and [term x10y] sorts between [term x9y] and [term x11y]. [opt_def [option -increasing]] Sort the items in increasing order ("smallest" items first). This is the default. [opt_def [option -integer]] Convert to integers and use integer comparison. [opt_def [option -real]] Convert to floating-point values and use floating comparison. [list_end] [call [arg pathName] [cmd {item state}] [arg command] [arg itemDesc] \ [opt [arg {arg ...}]]] This command is used to manipulate the states of an item. The exact behavior of the command depends on the [arg command] argument that follows the [cmd style] argument. The following forms of the command are supported: [list_begin definitions] [call [arg pathName] [cmd {item state forcolumn}] [arg itemDesc] [arg column] \ [opt [arg stateDescList]]] Just like [cmd {item state set}] but manipulates user-defined states for a single item column, not the item as a whole. [call [arg pathName] [cmd {item state get}] [arg itemDesc] \ [opt [arg {stateName ...}]]] If no [arg stateName] is specified, returns a list containing the names of all (predefined and user defined) states which are currently switched on for the item described by [arg itemDesc]. If a [arg stateName] is specified, 1 is returned if the specified state is currently switched on for the item, 0 otherwise. [call [arg pathName] [cmd {item state set}] [arg itemDesc] \ [opt [arg lastItem]] [opt [arg stateDescList]]] Every element of [arg stateDescList] must describe a user defined state (see [sectref STATES] below), with the particularity that the state name may have also a leading [const ~]. Every state with a leading [const !] will be switched off for the item described by [arg itemDesc], every state with a leading [const ~] will be toggled, and every state without leading [const !] or [const ~] will be switched on. If [arg lastItem] is specified, the state changes will be made for all items in the range betwen [arg itemDesc] and [arg lastItem]. [arg ItemDesc] may be the string [const all], then the state changes are made for all items of the treectrl widget. [list_end] [call [arg pathName] [cmd {item style}] [arg command] [arg itemDesc] \ [opt [arg {arg ...}]]] This command is used to manipulate the styles of an item. The exact behavior of the command depends on the [arg command] argument that follows the [cmd style] argument. The following forms of the command are supported: [list_begin definitions] [call [arg pathName] [cmd {item style elements}] [arg itemDesc] [arg column]] A list is returned containing the currently defined elements of the style, which is set for the item described by [arg itemDesc] in [arg column]. [call [arg pathName] [cmd {item style map}] [arg itemDesc] [arg column] \ [arg style] [arg map]] Like the [cmd "item style set"] command, this command may be used to assign a style to a specific column of an item. Unlike [cmd "item style set"], this command can transfer configuration values of elements in the current style to elements in the new style specified by [arg style]. [arg Map] must be a list of [arg elementOld]-[arg elementNew] pairs, where [arg elementOld] is an element in the current style, and [arg elementNew] is an element in the style specified by [arg style]. Both [arg elementOld] and [arg elementNew] must be of the same type ([const bitmap], [const text] etc). [call [arg pathName] [cmd {item style set}] [arg itemDesc] [opt [arg column]] \ [opt [arg style]] [opt [arg {column style ...}]]] If no [arg column] is specified, returns a list containing the names of the styles set for all columns of the item described by [arg itemDesc]. If no [arg style] argument is specified, returns the name of the style set for the item described by [arg itemDesc] in [arg column]. If there are one or more [arg style] arguments specified, it must be [arg column]-[arg style] pairs; then the style(s) of item in [arg column] will be set to [arg style]. [list_end] [call [arg pathName] [cmd {item text}] [arg itemDesc] [arg column] \ [opt [arg text]] [opt [arg {column text ...}]]] If no [arg text] argument is specified, returns the text of the first text element in [arg column] for the item described by [arg itemDesc]. If there are one or more [arg text] arguments specified, it must be [arg column]-[arg text] pairs; then the text(s) of item in [arg column] will be set to [arg text]. Note that this command is provided as a convenience. Use the [cmd "item element configure"] command if you want to set the text of a specific text element. [call [arg pathName] [cmd {item toggle}] [arg itemDesc] [opt [option -recurse]]] Changes the [const open] state of the item(s) described by [arg itemDesc]. If the state is currently switched off, this command does the same as the [cmd {item expand}] widget command, otherwise the same as the [cmd {item collapse}] widget command. [arg ItemDesc] may also be the string [const all], in which case the state of all items of the treectrl widget are toggled. If [option -recurse] is specified, the state of all descendants of [arg itemDesc] will also be toggled. [list_end] [call [arg pathName] [cmd marquee] [arg option] [opt [arg {arg ...}]]] This command is used to manipulate the marquee, a rectangular region of the treectrl widget optionally marked with a surrounding dotted line. One corner point of the marquee is fixed as long as the marquee is visible and called the anchor; the diagonally opposite corner is dragged with the mouse while resizing the marquee and simply called the corner. All coordinates handled by this widget command are treectrl coordinates, i.e. the [cmd canvasx] or [cmd canvasy] widget command should be used before any window coordinates can be used. The exact behavior of the command depends on the [arg option] argument that follows the [cmd marquee] argument. The following forms of the command are supported: [list_begin definitions] [call [arg pathName] [cmd {marquee anchor}] [opt [arg {x y}]]] Returns a list containing the x and y coordinates of the anchor, if no additional arguments are specified. If two coordinates are specified, sets the anchor to the given coordinates [arg x] and [arg y]. [call [arg pathName] [cmd {marquee cget}] [arg option]] This command returns the current value of the marquee option named [arg option]. [arg Option] may have any of the values accepted by the [cmd {marquee configure}] widget command. [call [arg pathName] [cmd {marquee configure}] [opt [arg option]] \ [opt [arg value]] [opt [arg {option value ...}]]] This command is similar to the [cmd configure] widget command except that it modifies the marquee options instead of modifying options for the overall treectrl widget. If no [arg option] is specified, the command returns a list describing all of the available marquee options (see [fun Tk_ConfigureInfo] for information on the format of this list). If [arg option] is specified with no [arg value], then the command returns a list describing the one named marquee option (this list will be identical to the corresponding sublist of the value returned if no [arg option] is specified). If one or more [arg option]-[arg value] pairs are specified, then the command modifies the given marquee option(s) to have the given value(s); in this case the command returns an empty string. [nl] The following marquee options are supported: [list_begin opt] [opt_def [option -visible] [arg boolean]] Specifies a boolean value which determines whether the dotted line surrounding the region of the marquee should currently be visible. [list_end] [call [arg pathName] [cmd {marquee coords}] [opt [arg {x1 y1 x2 y2}]]] Returns a list containing the x and y coordinates of the anchor followed by the x and y coordinates of the corner, if no additional arguments are specified. If four coordinates are specified, sets the anchor to the given coordinates [arg x1] and [arg y1] and the corner to the coordinates [arg x2] and [arg y2]. [call [arg pathName] [cmd {marquee corner}] [opt [arg {x y}]]] Returns a list containing the x and y coordinates of the corner, if no additional arguments are specified. If two coordinates are specified, sets the corner to the given coordinates [arg x] and [arg y]. [call [arg pathName] [cmd {marquee identify}]] Returns a list with information about the items inside the marquee. The list has as elements a list itself for every item which is displayed inside the marquee. The first element of these lists is the numerical item id, followed by another list with information about every column of the item inside the marque. These lists start with the column number, followed by the elements of the style defined for the item in this column if there are any. [list_end] [call [arg pathName] [cmd notify] [arg option] [opt [arg {arg ...}]]] Many Tk widgets communicate with the outside world via [option -command] callbacks and/or virtual events. For example, the Text widget evaluates its [option -yscrollcommand] when the view in the widget changes, and generates a <> virtual event when text is inserted or deleted. A treectrl widget replaces both methods of communication with its own event mechanism accessed through the [cmd notify] subcommands. [nl] The exact behavior of the command depends on the [arg option] argument that follows the [cmd notify] argument. The following forms of the command are supported: [list_begin definitions] [call [arg pathName] [cmd {notify bind}] [opt [arg object]] \ [opt [arg pattern]] [opt +][opt [arg script]]] This command associates Tcl scripts with events generated by a treectrl widget. If all three arguments are specified, [cmd {notify bind}] will arrange for [arg script] (a Tcl script) to be evaluated whenever the event(s) specified by [arg pattern] are generated by this treectrl widget. If [arg script] is prefixed with a "+", then it is appended to any existing binding for [arg pattern]; otherwise [arg script] replaces any existing binding. If [arg script] is an empty string then the current binding for [arg pattern] is destroyed, leaving [arg pattern] unbound. In all of the cases where a script argument is provided, [cmd {notify bind}] returns an empty string. [nl] If [arg pattern] is specified without a [arg script], then the script currently bound to [arg pattern] is returned, or an empty string is returned if there is no binding for [arg pattern]. If neither [arg pattern] nor [arg script] is specified, then the return value is a list whose elements are all the patterns for which there exist bindings for [arg object]. [nl] The [arg object] argument determines which window(s) the binding applies to. If [arg object] begins with a dot, as in .a.b.c, then it must be the path name for a window; otherwise it may be an arbitrary string. Unlike the regular [cmd bind] command, bindings on window names are not automatically removed if that window is destroyed. [call [arg pathName] [cmd {notify configure}] [arg object] \ [arg pattern] [opt [arg option]] [opt [arg value]] \ [opt [arg {option value ...}]]] This command sets and retrieves options for bindings created by the [cmd {notify bind}] command. [nl] If no [arg option] is specified, the command returns a list with [arg option]-[arg value] pairs describing all the available binding options for [arg pattern] on [arg object]. If [arg option] is specified with no [arg value], then the command returns the current value of that option. If one or more [arg option]-[arg value] pairs are specified, then the command modifies the given option(s) to have the given value(s) for the binding; in this case the command returns an empty string. [nl] The following binding options are supported: [list_begin opt] [opt_def [option -active] [arg boolean]] Specifies if the binding should be active. As long as this option is specified as false, a binding script will not be evaluated when the corresponding event is generated. [list_end] [call [arg pathName] [cmd {notify detailnames}] [arg eventName]] Returns a list containing the names of all details, which are installed for the event with the name [arg eventName] by means of the [cmd {notify install}] widget command or by the treectrl widget itself. [call [arg pathName] [cmd {notify eventnames}]] Returns a list containing the names of all events, which are installed by means of the [cmd {notify install}] widget command or by the treectrl widget itself. [call [arg pathName] [cmd {notify generate}] [arg pattern] \ [opt [arg charMap]] [opt [arg percentsCommand]]] This command causes the treectrl widget to generate an event. This command is typically used to generate dynamic events created by the [cmd {notify install}] command, but may be used to generate static events also. The event specified by [arg pattern] is generated, and any active binding scripts on the event are evaluated after undergoing %-substitution. If there are details defined for the event, [arg pattern] must describe an <[arg eventName]-[arg detail]> pair, otherwise [arg pattern] should be <[arg eventName]>. [nl] The optional [arg charMap] is a list of [arg char]-[arg value] pairs as in the form returned by [cmd {array get}]. Each [arg char] has to be exactly one character. The [arg charMap] is used in %-substitution. [nl] If [arg percentsCommand] is specified, then it will be used to perform %-substitution on any scripts bound to the event. If [arg percentsCommand] is not specified and the event is dynamic, then the %-subtitution command passed to [cmd {notify install}] will be used if it was provided. If the event is static or no %-substitution command is available, then all %-substitution is done using [arg charMap] only . See [cmd {notify install}] for a description of [arg percentsCommand]. [call [arg pathName] [cmd {notify install}] [arg pattern] [opt [arg percentsCommand]]] This command installs a new event or detail specified by [arg pattern]. Events created by this command are called dynamic, whereas events created by the treectrl widget itself are called static. This command may be called to set or retrieve the [arg percentsCommand] for an existing dynamic event. [nl] The optional [arg percentsCommand] is a list containing the name of a Tcl command, plus any optional arguments, to which five additional arguments will be appended. The command will be called to perform %-substitution on any scripts bound to the event specified by [arg pattern] (see [sectref {EVENTS AND SCRIPT SUBSTITUTIONS}]). [arg PercentsCommand] should be defined as follows: [example_begin] proc percentsCommand {?arg arg ...? char object event detail charMap} { switch -- $char { ... } return $value } [example_end] The optional [arg arg] arguments are part of the [arg percentsCommand] list. [arg Char] is the %-character to be substituted. [arg Object] is the same as the argument to [cmd {notify bind}]. [arg Event] and [arg detail] specify the event. [arg CharMap] is the same as the argument to [cmd {notify generate}]. [arg PercentsCommand] should return the value to replace the %-character by. If an error occurs evaluating [arg percentsCommand], the %-character is replaced by itself. [nl] [cmd {notify install}] returns the current [arg percentsCommand] for the event, or an error if the event is not dynamic. [call [arg pathName] [cmd {notify install detail}] [arg eventName] \ [arg detail] [opt [arg percentsCommand]]] This command is for backward compatibility only. Use [cmd {notify install}] with a [arg pattern] of <[arg eventName]-[arg detail]> instead. [call [arg pathName] [cmd {notify install event}] [arg eventName] \ [opt [arg percentsCommand]]] This command is for backward compatibility only. Use [cmd {notify install}] with a [arg pattern] of <[arg eventName]> instead. [call [arg pathName] [cmd {notify linkage}] [arg pattern]] Returns a string indicating whether the specified event or detail is created by means of the [cmd {notify install}] widget command ([const dynamic]) or by the treectrl widget itself ([const static]). [call [arg pathName] [cmd {notify linkage}] [arg eventName] [opt [arg detail]]] This form of this command is for backward compatibility only. Use [cmd {notify linkage}] with a [arg pattern] of <[arg eventName]> or <[arg eventName]-[arg detail]> instead. [call [arg pathName] [cmd {notify uninstall}] [arg pattern]] If the event or detail specified by [arg pattern] is static (i.e. created by the treectrl widget itself), an error is generated. Otherwise the dynamic event or detail is removed. [call [arg pathName] [cmd {notify uninstall detail}] \ [arg eventName] [arg detail]] This command is for backward compatibility only. Use [cmd {notify uninstall}] with a [arg pattern] of <[arg eventName]-[arg detail]> instead. [call [arg pathName] [cmd {notify uninstall event}] [arg eventName]] This command is for backward compatibility only. Use [cmd {notify uninstall}] with a [arg pattern] of <[arg eventName]> instead. [list_end] [call [arg pathName] [cmd numcolumns]] Deprecated. Use the [cmd {column count}] command instead. [call [arg pathName] [cmd numitems]] Deprecated. Use the [cmd {item count}] command instead. [call [arg pathName] [cmd orphans]] Returns a list containing the numerical ids of all items which has no parent item. An item is created without having a parent, and can later become an orphan again by means of the [cmd {item remove}] widget command. [call [arg pathName] [cmd range] [arg first] [arg last]] [arg First] and [arg last] must be an [arg itemDesc]. Returns a list containing the numerical ids of all items in the range between [arg first] and [arg last], inclusive. The order between [arg first] and [arg last] doesn't matter, and the result is always ordered by the increasing index of the items. [call [arg pathName] [cmd state] [arg option] [opt [arg stateName]]] This command is used to manipulate the list of user defined states, see section [sectref STATES] below. The exact behavior of the command depends on the [arg option] argument that follows the [cmd state] argument. The following forms of the command are supported: [list_begin definitions] [call [arg pathName] [cmd {state define}] [arg stateName]] Defines a new state with the name [arg stateName], which must not be the name of a predefined or already user defined state. [call [arg pathName] [cmd {state linkage}] [arg stateName]] Returns a string indicating whether the specified state is user defined by means of the [cmd {state define}] widget command ([const dynamic]) or predefined by the treectrl widget itself ([const static]). [call [arg pathName] [cmd {state names}]] Returns a list containing the names of all user defined states. [call [arg pathName] [cmd {state undefine}] [opt [arg {stateName ...}]]] Every [arg stateName] must be the name of a user defined state. Removes this state from the list of user defined states. [list_end] [call [arg pathName] [cmd see] [arg itemDesc]] Adjust the view in the treectrl so that the item described by [arg itemDesc] is visible. If the item is already visible then the command has no effect; otherwise the treectrl scrolls to bring the item into view, and the corresponding [const ] and/or [const ] events are generated. [call [arg pathName] [cmd selection] [arg option] [arg arg]] This command is used to adjust the selection within a treectrl. It has several forms, depending on [arg option]: [list_begin definitions] [call [arg pathName] [cmd {selection add}] [arg first] [opt [arg last]]] [arg First] and [arg last] (if specified) must be the string [const all] or an [arg itemDesc]. Selects all of the items in the range between [arg first] and [arg last], inclusive, without affecting the selection state of items outside that range. If one of the arguments is the string [const all], all items of the treectrl widget are added to the selection instead. A [const ] event is generated. [call [arg pathName] [cmd {selection anchor}] [opt [arg itemDesc]]] If [arg itemDesc] is specified, the selection anchor is set to the described item. The selection anchor is the end of the selection that is fixed while dragging out a selection with the mouse. The item description [const anchor] may be used to refer to the anchor item. This command doesn't modify the selection state of any item. Returns the numerical id of the selection anchor item. [call [arg pathName] [cmd {selection clear}] \ [opt [arg first]] [opt [arg last]]] [arg First] and [arg last] (if specified) must be the string [const all] or an [arg itemDesc]. If any of the items between [arg first] and [arg last] (inclusive) are selected, they are deselected. The selection state is not changed for items outside this range. If no additional arguments is given or one of the arguments is the string [const all], the selection is completely cleared instead. A [const ] event is generated. [call [arg pathName] [cmd {selection count}]] Returns an integer indicating the number of items in the treectrl that are currently selected. [call [arg pathName] [cmd {selection get}]] Returns a list containing the numerical ids of all of the items in the treectrl that are currently selected. If there are no items selected in the treectrl then an empty string is returned. [call [arg pathName] [cmd {selection includes}] [arg itemDesc]] Returns 1 if the item indicated by [arg itemDesc] is currently selected, 0 if it isn't. [call [arg pathName] [cmd {selection modify}] [arg select] [arg deselect]] Both arguments [arg select] and [arg deselect] must be the string [const all] or a possibly empty list of [arg itemDesc]s. Selects all of the items described by [arg select], then deselects all items described by [arg deselect], without affecting the selection state of any item not mentioned in both arguments. If one item is described in both arguments [arg select] and [arg deselect], it is added to the selection. A [const ] event is generated. [list_end] [call [arg pathName] [cmd style] [arg option] [opt [arg element]] \ [opt [arg {arg arg ...}]]] This command is used to manipulate styles, which could be considered as a geometry manager for the elements of one item. The exact behavior of the command depends on the [arg option] argument that follows the [cmd style] argument. The following forms of the command are supported: [list_begin definitions] [call [arg pathName] [cmd {style cget}] [arg style] [arg option]] This command returns the current value of the option named [arg option] associated with the style given by [arg style]. [arg Option] may have any of the values accepted by the [cmd {style configure}] widget command. [call [arg pathName] [cmd {style configure}] [arg style] [opt [arg option]] \ [opt [arg value]] [opt [arg {option value ...}]]] This command is similar to the [cmd configure] widget command except that it modifies options associated with the style given by [arg style] instead of modifying options for the overall treectrl widget. If no [arg option] is specified, the command returns a list describing all of the available options for [arg style] (see [fun Tk_ConfigureInfo] for information on the format of this list). If [arg option] is specified with no [arg value], then the command returns a list describing the one named option (this list will be identical to the corresponding sublist of the value returned if no [arg option] is specified). If one or more [arg option]-[arg value] pairs are specified, then the command modifies the given option(s) to have the given value(s) in [arg style]; in this case the command returns an empty string. [nl] The options of a style have effect on all elements managed by the style. The following options are supported: [list_begin opt] [opt_def [option -orient] [arg varName]] This option specifies which orientation should be used when laying out the elements associated with this style. Must be either [const horizontal] (the default) or [const vertical] or an abbreviation of one of these. [list_end] [call [arg pathName] [cmd {style create}] [arg style] \ [opt [arg {option value ...}]]] Create a new style in [arg pathName] with name [arg style]. After [arg style] there may be any number of [arg option]-[arg value] pairs, each of which sets one of the configuration options for the style. These same [arg option]-[arg value] pairs may be used in [cmd {style configure}] widget commands to change the style's configuration. Returns the name of the new style. [call [arg pathName] [cmd {style delete}] [opt [arg {style ...}]]] Deletes each of the named styles and returns an empty string. If a style is deleted while it is still used to display one or more items, it is also removed from the style list of these items. [call [arg pathName] [cmd {style elements}] [arg style] \ [opt [arg elementList]]] Specifies the elements which should be layed out by this style. Each element of [arg elementList] must be the name of an element created by the widget command [cmd {element create}]. Duplicate names in [arg elementList] are ignored. An element which was specified in a former call of this command for [arg style] but is not included in [arg elementList], will be deleted from the elements layed out by [arg style]. [nl] If the [arg elementList] argument is not specified, a list is returned containing the currently defined elements of [arg style]. [call [arg pathName] [cmd {style layout}] [arg style] [arg element] \ [opt [arg option]] [opt [arg value]] [opt [arg {option value ...}]]] This command is similar to the [cmd configure] widget command except that it modifies options used by [arg style] for laying out [arg element] instead of modifying options for the overall treectrl widget. If no [arg option] is specified, the command returns a list with [arg option]-[arg value] pairs describing all of the available options for the layout. If [arg option] is specified with no [arg value], then the command returns the value of the named option. If one or more [arg option]-[arg value] pairs are specified, then the command modifies the given option(s) to have the given value(s) for the layout; in this case the command returns an empty string. [nl] The options of a layout have effect on exactly the one element [arg element] managed by [arg style]. The following options are supported: [list_begin opt] [opt_def [option -detach] [arg boolean]] Specifies whether the element should be positioned by itself, i.e. independent from the other elements. [opt_def [option -expand] [arg style]] [opt_def [option -iexpand] [arg style]] It can happen that the element's space is larger than its requested dimensions. These options may be used to position (or stretch) the slave within its cell. [arg Style] is a string that contains zero or more of the characters [const n], [const s], [const e] or [const w]. Each letter refers to a side (north, south, east, or west) in which direction the element will grow in. [opt_def [option -indent] [arg boolean]] Specifies whether the element should be positioned to the right of the button/line area in the tree column. This option is ignored unless the -detach option is true. [opt_def [option -ipadx] [arg amount]] [opt_def [option -ipady] [arg amount]] [arg Amount] specifies how much internal padding to leave on the left and right (for [option -ipadx]) or top and bottom (for [option -ipady]) side of the element. [arg Amount] may be a list of two values to specify padding for the two sides separately, it defaults to 0. [opt_def [option -padx] [arg amount]] [opt_def [option -pady] [arg amount]] [arg Amount] specifies how much external padding to leave on the left and right (for [option -padx]) or top and bottom (for [option -pady]) side of the element. [arg Amount] may be a list of two values to specify padding for the two sides separately, it defaults to 0. [opt_def [option -squeeze] [arg style]] If an element's area is smaller than its requested dimensions, this option may be used to allow shrinking of the element. [arg Style] is a string that contains zero or more of the characters [const x] or [const y]. [const x] shrinks the element horizontally, [const y] shrinks it vertically. [opt_def [option -union] [arg elementList]] Specifies a list of other [arg element]s, which should be layed out inside the space of this element. [list_end] [call [arg pathName] [cmd {style names}]] Returns a list containing the names of all existing styles. [list_end] [call [arg pathName] [cmd toggle] [opt [option -recurse]] \ [opt [arg {itemDesc ...}]]] Use [cmd {item toggle}] instead. [call [arg pathName] [cmd xview] [opt [arg args]]] This command is used to query and change the horizontal position of the information displayed in the treectrl's window. It can take any of the following forms: [list_begin definitions] [call [arg pathName] [cmd xview]] Returns a list containing two elements. Each element is a real fraction between 0 and 1; together they describe the horizontal span that is visible in the window. For example, if the first element is .2 and the second element is .6, 20% of the tree's area is off-screen to the left, the middle 40% is visible in the window, and 40% of the tree is off-screen to the right. These are the same values passed to scrollbars via the [option -xscrollcommand] option. [call [arg pathName] [cmd {xview moveto}] [arg fraction]] Adjusts the view in the window so that [arg fraction] of the total width of the tree is off-screen to the left. [arg Fraction] must be a fraction between 0 and 1. A [const ] event is generated. [call [arg pathName] [cmd {xview scroll}] [arg number] [arg what]] This command shifts the view in the window left or right according to [arg number] and [arg what]. [arg Number] must be an integer. [arg What] must be either [const units] or [const pages] or an abbreviation of one of these. If [arg what] is [const units], the view adjusts left or right in units of the [option -xscrollincrement] option, if it is greater than zero, or in units of one-tenth the window's width otherwise. If [arg what] is [const pages] then the view adjusts in units of nine-tenths the window's width. If [arg number] is negative then information farther to the left becomes visible; if it is positive then information farther to the right becomes visible. A [const ] event is generated. [list_end] [call [arg pathName] [cmd yview] [opt [arg args]]] This command is used to query and change the vertical position of the information displayed in the treectrl's window. It can take any of the following forms: [list_begin definitions] [call [arg pathName] [cmd yview]] Returns a list containing two elements. Each element is a real fraction between 0 and 1; together they describe the vertical span that is visible in the window. For example, if the first element is .6 and the second element is 1.0, the lowest 40% of the tree's area is visible in the window. These are the same values passed to scrollbars via the [option -yscrollcommand] option. [call [arg pathName] [cmd {yview moveto}] [arg fraction]] Adjusts the view in the window so that [arg fraction] of the tree's area is off-screen to the top. [arg Fraction] is a fraction between 0 and 1. A [const ] event is generated. [call [arg pathName] [cmd {yview scroll}] [arg number] [arg what]] This command adjusts the view in the window up or down according to [arg number] and [arg what]. [arg Number] must be an integer. [arg What] must be either [const units] or [const pages]. If [arg what] is [const units], the view adjusts up or down in units of the [option -yscrollincrement] option, if it is greater than zero, or in units of one-tenth the window's height otherwise. If [arg what] is [const pages] then the view adjusts in units of nine-tenths the window's height. If [arg number] is negative then higher information becomes visible; if it is positive then lower information becomes visible. A [const ] event is generated. [list_end] [list_end] [section COLUMNS] A treectrl widget is capable of displaying multiple columns next to each other. An item can be considered as a row, which reaches over all columns. [para] Columns in a treectrl may be specified in a number of ways. See [sectref {COLUMN DESCRIPTION}] below. [para] There is always one special column, the [const tail] column, which fills all space to the right of the last ordinary column. This column has no number; it can only be specified by its tag [const tail], which cannot be modified. [para] When a column configuration option is specified as [const per-state], the state names are [const normal], [const active], [const pressed] or [const up], i.e. do not use item state names. See [sectref {PER-STATE OPTIONS}] for more info. [para] The following options are supported for columns: [list_begin opt] [opt_def [option -arrow] [arg direction]] Indicates whether or not an arrow should be drawn in the column header to the right of the column title. [arg Direction] must have one of the values [const none] (the default), [const up], or [const down]. [opt_def [option -arrowbitmap] [arg bitmap]] Specifies as a per-state option the bitmap to use to draw the arrow if this column's -arrow option is not [const none]. [opt_def [option -arrowimage] [arg image]] Specifies as a per-state option the image to use to draw the arrow if this column's -arrow option is not [const none]. If an image is specified for a certain state, it overrides the -arrowbitmap option. [opt_def [option -arrowside] [arg side]] Indicates on which side an arrow should be drawn, if at all. [arg Side] must be either [const left] or [const right] (the default). [opt_def [option -arrowgravity] [arg side]] Indicates onto which side an arrow should be packed, if there is more space available for drawing the arrow then needed. [arg Side] must be either [const left] (the default) or [const right]. [opt_def [option -arrowpadx] [arg amount]] [arg Amount] specifies how much padding to leave on the left and right side of the arrow. [arg Amount] may be a list of two values to specify padding for left and right separately; it defaults to 6. [opt_def [option -arrowpady] [arg amount]] [arg Amount] specifies how much padding to leave on the top and bottom of the arrow. [arg Amount] may be a list of two values to specify padding for top and bottom separately; it defaults to 0. [opt_def [option -bitmap] [arg bitmap]] Specifies the bitmap to display in the element to the left of the column title. [opt_def [option -background] [arg color]] Specifies as a per-state option the color to use for the background of the column header. [opt_def [option -borderwidth] [arg size]] Specifies a non-negative value indicating the width of the 3-D border to draw around the outside of the column header (if such a border is being drawn; the [option -relief] column option determines this). The value may have any of the forms acceptable to [fun Tk_GetPixels]. [opt_def [option -button] [arg boolean]] Indicates whether or not a mouse click on the column header should change the sorting order of the tree. [opt_def [option -expand] [arg boolean]] Indicates whether or not any extra horizontal space should be distributed to this column. This option has no effect if the [option -width] option is set. [opt_def [option -font] [arg fontName]] Specifies the font to use for the column title inside the column header. [opt_def [option -image] [arg image]] Specifies the image to display in the element to the left of the column title. This option overrides the [option -bitmap] column option. [opt_def [option -imagepadx] [arg amount]] [arg Amount] specifies how much padding to leave on the left and right side of the image. [arg Amount] may be a list of two values to specify padding for left and right separately; it defaults to 6. [opt_def [option -imagepady] [arg amount]] [arg Amount] specifies how much padding to leave on the top and bottom of the image. [arg Amount] may be a list of two values to specify padding for top and bottom separately; it defaults to 0. [opt_def [option -itembackground] [arg colorList]] Specifies a list of colors, which should be used as alternating background color for the items of this column. See also the [option -backgroundmode] widget option for more on this. [opt_def [option -justify] [arg justification]] This option determines how the items (and the title) line up with each other. Must be one of [const left] (the default), [const center], or [const right]. [opt_def [option -maxwidth] [arg size]] Specifies the maximum size, in screen units, that will be permitted for this column. If [arg size] is an empty string, then there is no limit on the maximum size of the column. This option has no effect if the [option -width] option is set. [opt_def [option -minwidth] [arg size]] Specifies the minimum size, in screen units, that will be permitted for this column. If [arg size] is an empty string, then the minimum size of the column is zero. This option has no effect if the [option -width] option is set. [opt_def [option -resize] [arg boolean]] Specifies a boolean value that indicates whether the user should be allowed to resize the column by dragging the right edge of the column's header. Default is true. [opt_def [option -squeeze] [arg boolean]] Specifies a boolean value that indicates whether or not the column should shrink when the content width of the treectrl is less than the total needed width of all visible columns. Defaults to false, which means the column will not get smaller than its needed width. The column will not get smaller than the value of its [option -minwidth] option, if specified. This option has no effect if the [option -width] option is set. [opt_def [option -state] [arg state]] Specifies one of three states for the column header: [const normal], [const active], or [const pressed]. The active state is used when the mouse is over the header. The pressed state is used when the mouse button is pressed in the header. [opt_def [option -stepwidth] [arg size]] Specifies a sort of tabbed alignment for columns that displays more than one item next to each other (typically in a treectrl widget with horizontal orientation). Every item will get an x-coordinate which is a multiple of [arg size]. [opt_def [option -tag] [arg tag]] Defines a unique name for the column which can be used whenever a column must be specified. [opt_def [option -text] [arg text]] Specifies a text to be displayed inside the column title. [opt_def [option -textcolor] [arg color]] Specifies a color, which should be used as foreground color to display the column title. [opt_def [option -textlines] [arg count]] Specifies the maximum number of lines of text to display in the column title. If this value is zero, the number of lines displayed is determined by any newline characters and the effects of wrapping when the column width is less than needed. The default is 1. Note: Under OSX this value is always set to 1 when the treectrl's [option -usetheme] option is true, because the Appearance Manager uses a fixed height for the column header; there is only room for a single line of text. [opt_def [option -textpadx] [arg amount]] [arg Amount] specifies how much padding to leave on the left and right side of the text. [arg Amount] may be a list of two values to specify padding for left and right separately; it defaults to 6. [opt_def [option -textpady] [arg amount]] [arg Amount] specifies how much padding to leave on the top and bottom of the text. [arg Amount] may be a list of two values to specify padding for top and bottom separately; it defaults to 0. [opt_def [option -visible] [arg boolean]] Indicates whether or not the column should be displayed. [opt_def [option -width] [arg size]] Specifies a fixed width for the column. If this value is an empty string, the column width is calculated as the maximum of: a) the width requested by items; b) the width requested by the column's header; and c) the column's [option -minwidth] option. This calculated width is also affected by the [option -expand] option and the [option -squeeze] option. In any case, the calculated width will not be greater than the [option -maxwidth] option, if specified. [opt_def [option -widthhack] [arg boolean]] Indicates whether or not all items should have the same width. This option only has effect when all of these conditions are met: a) the treectrl's [option -orientation] option is [const vertical]; b) only a single column is visible; c) the single visible column's [option -width] option is an empty string; and d) the treectrl's [option -wrap] option results in wrapping. [list_end] [section {COLUMN DESCRIPTION}] Many of the commands and options for a treectrl take as an argument a description of which column to operate on. See the [sectref EXAMPLES] section for examples. The initial part of a column description must begin with one of the following terms: [list_begin definitions] [lst_item [arg id]] Specifies the unique column identifier, where [arg id] should be the return value of a prior call of the [cmd {column create}] widget command. [lst_item [arg tag]] Specifies the value of a column's -tag option. [lst_item [const all]] Indicates every column, including the tail column. Not all commands accept this. [lst_item "[const first] [opt [const visible]]"] Indicates the leftmost column of the treectrl. If [const visible] is specified, the leftmost column whose -visible option is true is used. [lst_item "[const last] [opt [const visible]]"] Indicates the rightmost column of the treectrl (but not the tail column). If [const visible] is specified, the rightmost column whose -visible option is true is used. [lst_item "[const order] [arg n] [opt [const visible]]"] Indicates the [arg n]th column in the list of columns as returned by the [cmd {column order}] command. [lst_item [const tail]] Indicates the ever-present tail column of the treectrl. [lst_item [const tree]] Indicates the column specified by the -treecolumn option of the treectrl. [list_end] [para] The initial part of the column description (matching any of the values above) may be followed by one or more [arg modifier]s. A modifier changes the column used relative to the description up to this point. It may be specified in any of the following forms: [list_begin definitions] [lst_item "[const next] [opt [const visible]]"] Use the column to the right, or the column to the right whose -visible option is true. [lst_item "[const prev] [opt [const visible]]"] Use the column to the left, or the column to the left whose -visible option is true. [list_end] [section STATES] A state consists basically of just a string: its [arg stateName]. For every item a set of these states is managed, which means that every item can have every state switched on or off. The following states are predefined for every item: [list_begin definitions] [lst_item [const active]] At every time this state is set for exactly one item, which therefore is called the active item. When the treectrl widget is created or when the active item is deleted, the root item will become the active element. This state can be modified by means of the widget command [cmd activate]. [lst_item [const enabled]] This state is set for every item, when it is created. It cannot be modified. [lst_item [const focus]] This state is set for every item, if the treectrl widget has currently the focus. It cannot be modified by means of a widget command, but is maintained as reaction of a or event. [lst_item [const open]] If this state is switched on, the descendants of the item are displayed - the item is expanded. If this state is switched off, the descendants of the item are not displayed - the item is collapsed. For a new item this state is switched on. It can be modified by means of the widget commands [cmd {item expand}], [cmd {item collapse}], or [cmd {item toggle}]. [lst_item [const selected]] This state is set for every item, which is included in the selection. It can be modified by means of the widget command [cmd selection]. [list_end] [para] By means of the [cmd {state define}] widget command up to 27 additional [arg stateName]s can be defined. [para] Some widget commands expect a [arg stateDesc] argument, which is a [arg stateName] optionally preceded by an exclamation mark ([const !]). If the [arg stateName] has no leading [const !] it describes a currently switched on state, if it has a leading [const !] it describes a currently switched off state. [para] Some widget commands expect a [arg statePattern] argument, which should be a non empty list of [arg stateDesc]s. The pattern matches, if for every element of the list the [arg stateDesc] describes the same state as the item currently has. [section {PER-STATE OPTIONS}] The visual appearance of an item can change depending on the state the item is in, such as being the active item, being included in the selection, being collapsed, or some combination of those or other states. When a configuration option is described as [const per-state], it means the option describes a value which varies depending on the state of the item. If a per-state option is specified as a single value, the value is used for all states. Otherwise the per-state option must be specified as an even-numbered list. For example, to use the font "Times 12 bold" in a [const text] element regardless of the item state you can write: [example_begin] $T element configure MyTextElement -font {{Times 12 bold}} [example_end] However, to use a different font when the item is selected you could write: [example_begin] $T element configure MyTextElement -font {{Courier 10} selected {Times 12 bold} {}} [example_end] In the example above, the -font option reads "value stateList value stateList". If [arg stateList] is an empty list, the preceding [arg value] is used regardless of the item state. A non-empty stateList specifies a list of states which must be set for the item in order to use the preceding value. Each stateList can also include state names preceded by a ! sign, indicating the state must *not* be set for the item. For example: [example_begin] $T element configure MyRectElement -fill {blue {selected focus} gray {selected !focus}} [example_end] In the example above, the [const rect] element is filled with blue when the treectrl has the focus and the item is selected. If the treectrl does not have the focus, the example specifies that gray should be used for selected items. Also note that if the item is not selected, no color is specified for the -fill option. [section ELEMENTS] Elements are the smallest building blocks which are handled by a treectrl widget. One or more elements together can be combined to a style, which can be considered as a blueprint for an item. An element can be of type [const bitmap], [const border], [const image], [const rect], [const text] or [const window]. For each element type there is a section below describing the options which can modify an element of that type. [para] There are some options which can be configured to get different values dependent on the state of the item in which their element is included. The values of these options are basically a list. If the list has one element, the value is valid regardless of the item state. A list with an even number of elements ([arg value]-[arg statePattern] pairs) specifies different values for different states. For acceptable values of [arg statePattern] see the section [sectref STATES] above. The last [arg statePattern] can be empty, implementing a sort of [emph {otherwise clause}]. The options with this behaviour are called [emph {per-state options}]. [section {BITMAP ELEMENT}] An element of type [const bitmap] can be used to display a bitmap in an item. The following options are supported for bitmap elements: [list_begin opt] [opt_def [option -background] [arg color]] Specifies as a per-state option the color to use for each of the bitmap's '0' valued pixels. [opt_def [option -bitmap] [arg bitmap]] Specifies as a per-state option the bitmap to display in the element. [opt_def [option -foreground] [arg color]] Specifies as a per-state option the color to use for each of the bitmap's '1' valued pixels. [list_end] [section {BORDER ELEMENT}] An element of type [const border] can be used to add a border to an item. The following options are supported for border elements: [list_begin opt] [opt_def [option -background] [arg color]] Specifies as a per-state option the color to use for the background of the border. [opt_def [option -filled] [arg boolean]] Specifies whether the interior of the border should also be filled with the specified background color. Default to false, which means that the background color of the tree is visible between the borders. [opt_def [option -height] [arg size]] Specifies the height of the area of the border. [opt_def [option -relief] [arg reliefList]] Specifies as a per-state option relief of the border. For acceptable values see the description of the [option -relief] option in the [cmd options] manual page. [opt_def [option -thickness] [arg thickness]] Specifies the thickness of the border. [opt_def [option -width] [arg size]] Specifies the width of the area of the border. [list_end] [section {IMAGE ELEMENT}] An element of type [const image] can be used to display an image in an item. The following options are supported for image elements: [list_begin opt] [opt_def [option -height] [arg size]] Specifies the height of the image. [opt_def [option -image] [arg image]] Specifies as a per-state option the image to display in the element. [opt_def [option -width] [arg size]] Specifies the width of the image. [list_end] [section {RECTANGLE ELEMENT}] An element of type [const rect] can be used to display a rectangle in an item. The following options are supported for rectangle elements: [list_begin opt] [opt_def [option -fill] [arg fillColor]] Specifies as a per-state option the color to be used to fill rectangle's area. [arg Color] may have any of the forms accepted by [fun Tk_GetColor]. If [arg color] is an empty string (the default), then the rectangle will not be filled. [opt_def [option -height] [arg size]] Specifies the height of the rectangle. [opt_def [option -open] [arg open]] This option may be used to get an incomplete drawing of the outline. [arg Open] is a string that contains zero or more of the characters [const n], [const s], [const e] or [const w]. Each letter refers to a side (north, south, east, or west) that the outline will not be drawn. The default is the empty string, which causes the outline to be drawn completely. [opt_def [option -outline] [arg outlineColor]] Specifies as a per-state option the color that should be used to draw the outline of the rectangle. [arg Color] may have any of the forms accepted by [fun Tk_GetColor]. If [arg color] is specified as an empty string (the default), then no outline is drawn for the rectangle. [opt_def [option -outlinewidth] [arg outlineWidth]] Specifies the width of the outline to be drawn around the rectangle's region. [arg outlineWidth] may be in any of the forms acceptable to [fun Tk_GetPixels]. If the [option -outline] option has been specified as an empty string (the default), then no outline is drawn. [opt_def [option -showfocus] [arg boolean]] Specifies a boolean value indicating whether a "focus ring" should be drawn around the rectangle, if the item containing the rectangle is the active item and the treectrl widget has currently the focus. [opt_def [option -width] [arg size]] Specifies the width of the rectangle. [list_end] [section {TEXT ELEMENT}] An element of type [const text] can be used to display a text in an item. The following options are supported for text elements: [list_begin opt] [opt_def [option -data] [arg data]] Specifies raw data to be printed as text. [opt_def [option -datatype] [arg dataType]] Specifies the datatype which should be used to convert the value of the [option -data] option to the text to be printed. Acceptable values are [const double], [const integer], [const long], [const string], or [const time]. [opt_def [option -fill] [arg color]] Specifies as a per-state option the color to be used as foreground color of the text. [arg Color] may have any of the forms accepted by [fun Tk_GetColor]. If [arg color] is an empty string (the default), then the text will be displayed with the color specified as foreground color of the treectrl widget. [opt_def [option -format] [arg format]] This option overwrites the default format choosen by means of the [option -datatype] option. For a datatype [const time] [arg format] should be a valid format string for the [cmd clock] command, for all other datatypes it should be a valid format element of the [cmd format] command. [opt_def [option -font] [arg fontName]] Specifies as a per-state option the font to use for the text. [arg FontName] may be any string acceptable to [fun Tk_GetFont]. If this option isn't specified, it defaults to the font configured for the treectrl widget. [opt_def [option -justify] [arg how]] Specifies how to justify the text within its bounding region. [arg How] must be one of the values [const left], [const right], or [const center]. This option will only matter if the text is displayed as multiple lines. If the option is omitted, it defaults to [const left]. [opt_def [option -lines] [arg lineCount]] Specifies the maximal number of lines the text should be printed. If the doesn't fit into the area of [arg lineCount] lines with the configured width, it will be truncated at the right end and filled up with an ellipsis. [opt_def [option -text] [arg string]] [arg String] specifies the characters to be displayed by the element. Non printable characters are displayed in their escaped form (e.g. a new line character is displayed as the two characters [const \\n]). If this option is specified, any values of [option -data], [option -datatype], and [option -format] are ignored. [opt_def [option -textvariable] [arg varName]] Specifies the name of a variable. The value of the variable is a text string to be displayed by the element; if the variable value changes then the element will automatically update itself to reflect the new value. [opt_def [option -width] [arg size]] Specifies the width of the area of the text. [opt_def [option -wrap] [arg mode]] [arg Mode] specifies how to handle lines that are wider than the text's area. Acceptable values are [const char] or [const word]. [list_end] [section {WINDOW ELEMENT}] An element of type [const window] can be used to display a Tk window in an item. The following options are supported for window elements: [list_begin opt] [opt_def [option -window] [arg pathName]] Specifies the window to associate with this element. The window specified by [arg pathName] must either be a child of the treectrl widget or a child of some ancestor of the treectrl widget. [arg PathName] may not refer to a top-level window. This option cannot be specified by the [cmd {element create}] or [cmd {element configure}] commands, only by the [cmd {item element configure}] command; i.e., the element must be associated with a particular item. [list_end] [section {ITEM DESCRIPTION}] Many of the commands and options for a treectrl take as an argument a description of which item to operate on. See the [sectref EXAMPLES] section for examples. The initial part of an item description must begin with one of the following terms: [list_begin definitions] [lst_item [arg id]] Specifies the unique item identifier, where [arg id] should be the return value of a prior call of the [cmd {item create}] widget command, or [const 0] to specify the ever-present root item. [lst_item [const active]] Indicates the item that is currently active, i.e. normally the item specified as argument of the last successful [cmd activate] widget command, or the root item if no such call happened yet. [lst_item [const anchor]] Indicates the anchor item of the selection, i.e. normally the item specified as argument of the last successful [cmd {selection anchor}] widget command, or the root item if no such call happened yet. [lst_item "[const first] [opt [const visible]]"] Indicates the first item of the treectrl, i.e. the root item. If [const visible] is specified and the widget is configured with [option -showroot] [const no], the first visible child of the root node is specified instead. [lst_item "[const last] [opt [const visible]]"] Indicates the last item of the treectrl. If [const visible] is specified and the last item is currently not visible, i.e. one of its father nodes is collapsed, the last visible item is specified instead. [lst_item "[const nearest] [arg {x y}]"] Indicates the item nearest to the point given by [arg x] and [arg y]. [lst_item "[const rnc] [arg {row column}]"] Indicates the item in the given [arg row] and [arg column]. You can memorize [const rnc] as abbreviation of "row 'n' column". [lst_item [const root]] Indicates the root item of the treectrl. [list_end] [para] The initial part of the item description (matching any of the values above) may be followed by one or more [arg modifier]s. A modifier changes the item used relative to the description up to this point. It may be specified in any of the following forms: [list_begin definitions] [lst_item [const above]] Use the item one row above in this column. [lst_item [const below]] Use the item one row below in this column. [lst_item [const bottom]] Use the item in the last row of this column. [lst_item "[const child] [arg n] [opt [const visible]]"] Use the [arg n]th child of the item. [lst_item "[const firstchild] [opt [const visible]]"] Use the first child of the item. [lst_item "[const lastchild] [opt [const visible]]"] Use the last child of the item. [lst_item [const left]] Use the item one column to the left in the same row. [lst_item [const leftmost]] Use the item of the first column in the same row. [lst_item "[const next] [opt [const visible]]"] Use the next item, which is the first existant (or visible) item of the following list: the first child, the next sibling or the next sibling of the nearest parent which has one. [lst_item "[const nextsibling] [opt [const visible]]"] Use the next sibling of the item. [lst_item [const parent]] Use the parent of the item. [lst_item "[const prev] [opt [const visible]]"] Use the last child of the previous sibling, or the parent if there is no previos sibling. [lst_item "[const prevsibling] [opt [const visible]]"] Use the previous sibling of the item. [lst_item [const right]] Use the item one column to the right in the same row. [lst_item [const rightmost]] Use the item of the last column in the same row. [lst_item "[const sibling] [arg n] [opt [const visible]]"] Use the [arg n]th child of the item's parent. [lst_item [const top]] Use the item in the first row of this column. [list_end] [section {EVENTS AND SCRIPT SUBSTITUTIONS}] The [arg script] argument to [cmd {notify bind}] is a Tcl script, which will be evaluated whenever the given event is generated. [arg Script] will be executed in the same interpreter that the [cmd {notify bind}] command was executed in, and it will run at global level (only global variables will be accessible). If [arg script] contains any [const %] characters, then the script will not be evaluated directly. Instead, a new script will be generated by replacing each [const %], and the character following it, with information from the current event. Unlike the regular Tk [cmd bind] mechanism, each event generated by a treectrl widget has its own set of %-substitutions. [para] The following %-substitutions are valid for all static events: [list_begin opt] [opt_def %%] Replaced with a single % [opt_def %d] The detail name [opt_def %e] The event name [opt_def %P] The pattern, either or [opt_def %W] The object argument to the [cmd "notify bind"] command [opt_def %T] The treectrl widget which generated the event [opt_def %?] A list of the format {char value char value ...} for each %-substitution character and the value it is replaced by [list_end] [para] The following events may be generated by a treectrl widget: [list_begin definitions] [lst_item [const ]] Generated whenever the active item changes. [list_begin opt] [opt_def %c] The current active item [opt_def %p] The previous active item [list_end] [lst_item [const ]] Generated before an item is collapsed. [list_begin opt] [opt_def %I] The item id [list_end] [lst_item [const ]] Generated after an item is collapsed. [list_begin opt] [opt_def %I] The item id [list_end] [lst_item [const ]] Generated before an item is expanded. This event is useful if you want to add child items to the item just before the item is expanded. [list_begin opt] [opt_def %I] The item id [list_end] [lst_item [const ]] Generated after an item is expanded. [list_begin opt] [opt_def %I] The item id [list_end] [lst_item [const ]] Generated when items are about to be deleted by the [cmd {item delete}] command. [list_begin opt] [opt_def %i] List of items ids being deleted. [list_end] [lst_item [const ]] Generated whenever the view in the treectrl changes in such a way that a horizontal scrollbar should be redisplayed. [list_begin opt] [opt_def %l] Same as the first fraction appended to [const -xscrollcommand]. Think [emph lower]. [opt_def %u] Same as the second fraction appended to [const -xscrollcommand]. Think [emph upper]. [list_end] [lst_item [const ]] Generated whenever the view in the treectrl changes in such a way that a vertical scrollbar should be redisplayed. [list_begin opt] [opt_def %l] Same as the first fraction appended to [const -yscrollcommand]. Think [emph lower]. [opt_def %u] Same as the second fraction appended to [const -yscrollcommand]. Think [emph upper]. [list_end] [lst_item [const ]] Generated whenever the selection changes. This event gives information about how the selection changed. [list_begin opt] [opt_def %c] Same as the [cmd "selection count"] widget command [opt_def %D] List of newly-deselected item ids [opt_def %S] List of newly-selected item ids [list_end] [list_end] [section {DYNAMIC EVENTS}] In addition to the pre-defined static events such as and , new dynamic events can be created by using the [cmd {notify install}] command. [para] The following events may be generated by the library scripts: [list_begin definitions] [lst_item [const ]] [lst_item [const ]] [lst_item [const ]] Generated whenever the user drag-and-drops a column header. The library scripts do not actually move a dragged column. You must bind to the receive event to move the column. See [sectref EXAMPLES]. [list_begin opt] [opt_def %C] The column that was dragged [opt_def %b] The column to move the dragged column before [list_end] [lst_item [const ]] [lst_item [const ]] [lst_item [const ]] Generated whenever the user drag-and-drops a file into a directory. This event is generated by the filelist-bindings.tcl library code, which is not used by default. See the "Explorer" demos. [list_begin opt] [opt_def %I] The item that the user dropped the dragged items on. [opt_def %l] (lowercase L) The list of dragged items. [list_end] [lst_item [const ]] The filelist-bindings.tcl code will display a text-editing window if the user clicks on a selected file/folder name. See the "Explorer" demos. [list_begin opt] [opt_def %I] The item containing the edited text element [opt_def %C] The column containing the edited text element [opt_def %E] The name of the edited text element [opt_def %t] The edited text [list_end] [lst_item [const ]] Generated whenever the user clicks and releases the left mouse button in a column header if the column's -button option is true. You can bind a script to this event to sort the list. [list_begin opt] [opt_def %C] The column whose header was clicked [list_end] [list_end] The library scripts provide an example of using a dynamic event called , which is generated when the mouse button is released over a column header. [example_begin] treectrl .t .t notify install .t notify bind ConsoleTag { puts "header %C clicked in treectrl %T" } proc ::TreeCtrl::Release1 {w x y} { ... $w notify generate [lb]list C $Priv(column)[rb] \ [lb]list ::TreeCtrl::PercentsCmd $w[rb] ... } [example_end] In the example a new treectrl widget is created and the event is installed. For convenience there is no [arg percentsCommand] argument to [cmd {notify install}]; instead the call to [cmd {notify generate}] specifies the %-substitution command. A script is bound to the event with [cmd {notify bind}] which will print out the column number and widget name to the console (in the demos, is used to sort the list based on the column that was clicked). The [arg charMap] argument to [cmd {notify generate}] provides a list of %-substitution characters and values which is used by ::TreeCtrl::PercentsCmd. In this example any %C in any script bound to the event will be replaced by the value of $Priv(column). [section {DEFAULT BINDINGS}] Tk automatically creates class bindings for treectrl widgets that give them the following default behavior. [list_begin enum] [enum] Clicking mouse button 1 over an item positions the active cursor on the item, sets the input focus to this widget, and resets the selection of the widget to this item, if it is not already in the selection. [enum] Clicking mouse button 1 with the Control key down will reposition the active cursor and add the item to the selection without ever removing any items from the selection. [enum] If the mouse is dragged out of the widget while button 1 is pressed, the treectrl will automatically scroll to make more items visible (if there are more items off-screen on the side where the mouse left the window). [enum] The Left and Right keys move the active cursor one item to the left or right; for an hierarchical tree with vertical orientation nothing will happen, since it has no two items in the same row. The selection is set to include only the active item. If Left or Right is typed with the Shift key down, then the active cursor moves and the selection is extended to include the new item. [enum] The Up and Down keys move the active cursor one item up or down. The selection is set to include only the active item. If Up or Down is typed with the Shift key down, then the active cursor moves and the selection is extended to include the new item. [enum] The Next and Prior keys move the active cursor forward or backwards by one screenful, without affecting the selection. [enum] Control-Next and Control-Prior scroll the view right or left by one page without moving the active cursor or affecting the selection. Control-Left and Control-Right behave the same. [enum] The Home and End keys scroll to the left or right end of the widget without moving the active cursor or affecting the selection. [enum] The Control-Home and Control-End keys scroll to the top or bottom of the widget, they also activate and select the first or last item. If also the Shift key is down, then the active cursor moves and the selection is extended to include the new item. [enum] The Space and Select keys set the selection to the active item. [enum] Control-/ selects the entire contents of the widget. [enum] Control-\\ clears any selection in the widget. [enum] The + and - keys expand or collapse the active item, the Return key toggles the active item. [enum] The mousewheel scrolls the view of the widget four lines up or down depending on the direction, the wheel was turned. The active cursor or the selection is not affected. [list_end] [section EXAMPLES] Get the unique identifier for the leftmost visible column: [example_begin] set id [lb]$T column index "first visible"[rb] [example_end] Delete the leftmost column: [example_begin] $T column delete "order 0" [example_end] Take the visible column that is to the left of the last column, and move that column in front of the tail column: [example_begin] $T column move "last prev visible" tail [example_end] Get the unique identifier for the first visible item: [example_begin] set id [lb]$T item index "first visible"[rb] [example_end] Delete the parent of the item that is under the point x,y: [example_begin] $T item delete "nearest $x $y parent" [example_end] Add the 10th child of the second child of the root item to the selection: [example_begin] $T selection add "root firstchild nextsibling child 10" [example_end] Move a column that the user drag-and-dropped: [example_begin] $T column dragconfigure -enable yes $T notify install $T notify bind MyTag { %T column move %C %b } [example_end] [see_also listbox(n) image(n) bitmap(n) bind(n) options(n)] [keywords tree widget] [manpage_end]