diff options
Diffstat (limited to 'contrib/prebuilt/include/google/protobuf/descriptor.proto')
-rw-r--r-- | contrib/prebuilt/include/google/protobuf/descriptor.proto | 533 |
1 files changed, 0 insertions, 533 deletions
diff --git a/contrib/prebuilt/include/google/protobuf/descriptor.proto b/contrib/prebuilt/include/google/protobuf/descriptor.proto deleted file mode 100644 index 233f879..0000000 --- a/contrib/prebuilt/include/google/protobuf/descriptor.proto +++ /dev/null @@ -1,533 +0,0 @@ -// Protocol Buffers - Google's data interchange format -// Copyright 2008 Google Inc. All rights reserved. -// http://code.google.com/p/protobuf/ -// -// Redistribution and use in source and binary forms, with or without -// modification, are permitted provided that the following conditions are -// met: -// -// * Redistributions of source code must retain the above copyright -// notice, this list of conditions and the following disclaimer. -// * Redistributions in binary form must reproduce the above -// copyright notice, this list of conditions and the following disclaimer -// in the documentation and/or other materials provided with the -// distribution. -// * Neither the name of Google Inc. nor the names of its -// contributors may be used to endorse or promote products derived from -// this software without specific prior written permission. -// -// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -// Author: kenton@google.com (Kenton Varda) -// Based on original Protocol Buffers design by -// Sanjay Ghemawat, Jeff Dean, and others. -// -// The messages in this file describe the definitions found in .proto files. -// A valid .proto file can be translated directly to a FileDescriptorProto -// without any other information (e.g. without reading its imports). - - - -package google.protobuf; -option java_package = "com.google.protobuf"; -option java_outer_classname = "DescriptorProtos"; - -// descriptor.proto must be optimized for speed because reflection-based -// algorithms don't work during bootstrapping. -option optimize_for = SPEED; - -// The protocol compiler can output a FileDescriptorSet containing the .proto -// files it parses. -message FileDescriptorSet { - repeated FileDescriptorProto file = 1; -} - -// Describes a complete .proto file. -message FileDescriptorProto { - optional string name = 1; // file name, relative to root of source tree - optional string package = 2; // e.g. "foo", "foo.bar", etc. - - // Names of files imported by this file. - repeated string dependency = 3; - - // All top-level definitions in this file. - repeated DescriptorProto message_type = 4; - repeated EnumDescriptorProto enum_type = 5; - repeated ServiceDescriptorProto service = 6; - repeated FieldDescriptorProto extension = 7; - - optional FileOptions options = 8; - - // This field contains optional information about the original source code. - // You may safely remove this entire field whithout harming runtime - // functionality of the descriptors -- the information is needed only by - // development tools. - optional SourceCodeInfo source_code_info = 9; -} - -// Describes a message type. -message DescriptorProto { - optional string name = 1; - - repeated FieldDescriptorProto field = 2; - repeated FieldDescriptorProto extension = 6; - - repeated DescriptorProto nested_type = 3; - repeated EnumDescriptorProto enum_type = 4; - - message ExtensionRange { - optional int32 start = 1; - optional int32 end = 2; - } - repeated ExtensionRange extension_range = 5; - - optional MessageOptions options = 7; -} - -// Describes a field within a message. -message FieldDescriptorProto { - enum Type { - // 0 is reserved for errors. - // Order is weird for historical reasons. - TYPE_DOUBLE = 1; - TYPE_FLOAT = 2; - TYPE_INT64 = 3; // Not ZigZag encoded. Negative numbers - // take 10 bytes. Use TYPE_SINT64 if negative - // values are likely. - TYPE_UINT64 = 4; - TYPE_INT32 = 5; // Not ZigZag encoded. Negative numbers - // take 10 bytes. Use TYPE_SINT32 if negative - // values are likely. - TYPE_FIXED64 = 6; - TYPE_FIXED32 = 7; - TYPE_BOOL = 8; - TYPE_STRING = 9; - TYPE_GROUP = 10; // Tag-delimited aggregate. - TYPE_MESSAGE = 11; // Length-delimited aggregate. - - // New in version 2. - TYPE_BYTES = 12; - TYPE_UINT32 = 13; - TYPE_ENUM = 14; - TYPE_SFIXED32 = 15; - TYPE_SFIXED64 = 16; - TYPE_SINT32 = 17; // Uses ZigZag encoding. - TYPE_SINT64 = 18; // Uses ZigZag encoding. - }; - - enum Label { - // 0 is reserved for errors - LABEL_OPTIONAL = 1; - LABEL_REQUIRED = 2; - LABEL_REPEATED = 3; - // TODO(sanjay): Should we add LABEL_MAP? - }; - - optional string name = 1; - optional int32 number = 3; - optional Label label = 4; - - // If type_name is set, this need not be set. If both this and type_name - // are set, this must be either TYPE_ENUM or TYPE_MESSAGE. - optional Type type = 5; - - // For message and enum types, this is the name of the type. If the name - // starts with a '.', it is fully-qualified. Otherwise, C++-like scoping - // rules are used to find the type (i.e. first the nested types within this - // message are searched, then within the parent, on up to the root - // namespace). - optional string type_name = 6; - - // For extensions, this is the name of the type being extended. It is - // resolved in the same manner as type_name. - optional string extendee = 2; - - // For numeric types, contains the original text representation of the value. - // For booleans, "true" or "false". - // For strings, contains the default text contents (not escaped in any way). - // For bytes, contains the C escaped value. All bytes >= 128 are escaped. - // TODO(kenton): Base-64 encode? - optional string default_value = 7; - - optional FieldOptions options = 8; -} - -// Describes an enum type. -message EnumDescriptorProto { - optional string name = 1; - - repeated EnumValueDescriptorProto value = 2; - - optional EnumOptions options = 3; -} - -// Describes a value within an enum. -message EnumValueDescriptorProto { - optional string name = 1; - optional int32 number = 2; - - optional EnumValueOptions options = 3; -} - -// Describes a service. -message ServiceDescriptorProto { - optional string name = 1; - repeated MethodDescriptorProto method = 2; - - optional ServiceOptions options = 3; -} - -// Describes a method of a service. -message MethodDescriptorProto { - optional string name = 1; - - // Input and output type names. These are resolved in the same way as - // FieldDescriptorProto.type_name, but must refer to a message type. - optional string input_type = 2; - optional string output_type = 3; - - optional MethodOptions options = 4; -} - -// =================================================================== -// Options - -// Each of the definitions above may have "options" attached. These are -// just annotations which may cause code to be generated slightly differently -// or may contain hints for code that manipulates protocol messages. -// -// Clients may define custom options as extensions of the *Options messages. -// These extensions may not yet be known at parsing time, so the parser cannot -// store the values in them. Instead it stores them in a field in the *Options -// message called uninterpreted_option. This field must have the same name -// across all *Options messages. We then use this field to populate the -// extensions when we build a descriptor, at which point all protos have been -// parsed and so all extensions are known. -// -// Extension numbers for custom options may be chosen as follows: -// * For options which will only be used within a single application or -// organization, or for experimental options, use field numbers 50000 -// through 99999. It is up to you to ensure that you do not use the -// same number for multiple options. -// * For options which will be published and used publicly by multiple -// independent entities, e-mail kenton@google.com to reserve extension -// numbers. Simply tell me how many you need and I'll send you back a -// set of numbers to use -- there's no need to explain how you intend to -// use them. If this turns out to be popular, a web service will be set up -// to automatically assign option numbers. - - -message FileOptions { - - // Sets the Java package where classes generated from this .proto will be - // placed. By default, the proto package is used, but this is often - // inappropriate because proto packages do not normally start with backwards - // domain names. - optional string java_package = 1; - - - // If set, all the classes from the .proto file are wrapped in a single - // outer class with the given name. This applies to both Proto1 - // (equivalent to the old "--one_java_file" option) and Proto2 (where - // a .proto always translates to a single class, but you may want to - // explicitly choose the class name). - optional string java_outer_classname = 8; - - // If set true, then the Java code generator will generate a separate .java - // file for each top-level message, enum, and service defined in the .proto - // file. Thus, these types will *not* be nested inside the outer class - // named by java_outer_classname. However, the outer class will still be - // generated to contain the file's getDescriptor() method as well as any - // top-level extensions defined in the file. - optional bool java_multiple_files = 10 [default=false]; - - // If set true, then the Java code generator will generate equals() and - // hashCode() methods for all messages defined in the .proto file. This is - // purely a speed optimization, as the AbstractMessage base class includes - // reflection-based implementations of these methods. - optional bool java_generate_equals_and_hash = 20 [default=false]; - - // Generated classes can be optimized for speed or code size. - enum OptimizeMode { - SPEED = 1; // Generate complete code for parsing, serialization, - // etc. - CODE_SIZE = 2; // Use ReflectionOps to implement these methods. - LITE_RUNTIME = 3; // Generate code using MessageLite and the lite runtime. - } - optional OptimizeMode optimize_for = 9 [default=SPEED]; - - - - - // Should generic services be generated in each language? "Generic" services - // are not specific to any particular RPC system. They are generated by the - // main code generators in each language (without additional plugins). - // Generic services were the only kind of service generation supported by - // early versions of proto2. - // - // Generic services are now considered deprecated in favor of using plugins - // that generate code specific to your particular RPC system. Therefore, - // these default to false. Old code which depends on generic services should - // explicitly set them to true. - optional bool cc_generic_services = 16 [default=false]; - optional bool java_generic_services = 17 [default=false]; - optional bool py_generic_services = 18 [default=false]; - - // The parser stores options it doesn't recognize here. See above. - repeated UninterpretedOption uninterpreted_option = 999; - - // Clients can define custom options in extensions of this message. See above. - extensions 1000 to max; -} - -message MessageOptions { - // Set true to use the old proto1 MessageSet wire format for extensions. - // This is provided for backwards-compatibility with the MessageSet wire - // format. You should not use this for any other reason: It's less - // efficient, has fewer features, and is more complicated. - // - // The message must be defined exactly as follows: - // message Foo { - // option message_set_wire_format = true; - // extensions 4 to max; - // } - // Note that the message cannot have any defined fields; MessageSets only - // have extensions. - // - // All extensions of your type must be singular messages; e.g. they cannot - // be int32s, enums, or repeated messages. - // - // Because this is an option, the above two restrictions are not enforced by - // the protocol compiler. - optional bool message_set_wire_format = 1 [default=false]; - - // Disables the generation of the standard "descriptor()" accessor, which can - // conflict with a field of the same name. This is meant to make migration - // from proto1 easier; new code should avoid fields named "descriptor". - optional bool no_standard_descriptor_accessor = 2 [default=false]; - - // The parser stores options it doesn't recognize here. See above. - repeated UninterpretedOption uninterpreted_option = 999; - - // Clients can define custom options in extensions of this message. See above. - extensions 1000 to max; -} - -message FieldOptions { - // The ctype option instructs the C++ code generator to use a different - // representation of the field than it normally would. See the specific - // options below. This option is not yet implemented in the open source - // release -- sorry, we'll try to include it in a future version! - optional CType ctype = 1 [default = STRING]; - enum CType { - // Default mode. - STRING = 0; - - CORD = 1; - - STRING_PIECE = 2; - } - // The packed option can be enabled for repeated primitive fields to enable - // a more efficient representation on the wire. Rather than repeatedly - // writing the tag and type for each element, the entire array is encoded as - // a single length-delimited blob. - optional bool packed = 2; - - - // Is this field deprecated? - // Depending on the target platform, this can emit Deprecated annotations - // for accessors, or it will be completely ignored; in the very least, this - // is a formalization for deprecating fields. - optional bool deprecated = 3 [default=false]; - - // EXPERIMENTAL. DO NOT USE. - // For "map" fields, the name of the field in the enclosed type that - // is the key for this map. For example, suppose we have: - // message Item { - // required string name = 1; - // required string value = 2; - // } - // message Config { - // repeated Item items = 1 [experimental_map_key="name"]; - // } - // In this situation, the map key for Item will be set to "name". - // TODO: Fully-implement this, then remove the "experimental_" prefix. - optional string experimental_map_key = 9; - - // The parser stores options it doesn't recognize here. See above. - repeated UninterpretedOption uninterpreted_option = 999; - - // Clients can define custom options in extensions of this message. See above. - extensions 1000 to max; -} - -message EnumOptions { - - // The parser stores options it doesn't recognize here. See above. - repeated UninterpretedOption uninterpreted_option = 999; - - // Clients can define custom options in extensions of this message. See above. - extensions 1000 to max; -} - -message EnumValueOptions { - // The parser stores options it doesn't recognize here. See above. - repeated UninterpretedOption uninterpreted_option = 999; - - // Clients can define custom options in extensions of this message. See above. - extensions 1000 to max; -} - -message ServiceOptions { - - // Note: Field numbers 1 through 32 are reserved for Google's internal RPC - // framework. We apologize for hoarding these numbers to ourselves, but - // we were already using them long before we decided to release Protocol - // Buffers. - - // The parser stores options it doesn't recognize here. See above. - repeated UninterpretedOption uninterpreted_option = 999; - - // Clients can define custom options in extensions of this message. See above. - extensions 1000 to max; -} - -message MethodOptions { - - // Note: Field numbers 1 through 32 are reserved for Google's internal RPC - // framework. We apologize for hoarding these numbers to ourselves, but - // we were already using them long before we decided to release Protocol - // Buffers. - - // The parser stores options it doesn't recognize here. See above. - repeated UninterpretedOption uninterpreted_option = 999; - - // Clients can define custom options in extensions of this message. See above. - extensions 1000 to max; -} - -// A message representing a option the parser does not recognize. This only -// appears in options protos created by the compiler::Parser class. -// DescriptorPool resolves these when building Descriptor objects. Therefore, -// options protos in descriptor objects (e.g. returned by Descriptor::options(), -// or produced by Descriptor::CopyTo()) will never have UninterpretedOptions -// in them. -message UninterpretedOption { - // The name of the uninterpreted option. Each string represents a segment in - // a dot-separated name. is_extension is true iff a segment represents an - // extension (denoted with parentheses in options specs in .proto files). - // E.g.,{ ["foo", false], ["bar.baz", true], ["qux", false] } represents - // "foo.(bar.baz).qux". - message NamePart { - required string name_part = 1; - required bool is_extension = 2; - } - repeated NamePart name = 2; - - // The value of the uninterpreted option, in whatever type the tokenizer - // identified it as during parsing. Exactly one of these should be set. - optional string identifier_value = 3; - optional uint64 positive_int_value = 4; - optional int64 negative_int_value = 5; - optional double double_value = 6; - optional bytes string_value = 7; - optional string aggregate_value = 8; -} - -// =================================================================== -// Optional source code info - -// Encapsulates information about the original source file from which a -// FileDescriptorProto was generated. -message SourceCodeInfo { - // A Location identifies a piece of source code in a .proto file which - // corresponds to a particular definition. This information is intended - // to be useful to IDEs, code indexers, documentation generators, and similar - // tools. - // - // For example, say we have a file like: - // message Foo { - // optional string foo = 1; - // } - // Let's look at just the field definition: - // optional string foo = 1; - // ^ ^^ ^^ ^ ^^^ - // a bc de f ghi - // We have the following locations: - // span path represents - // [a,i) [ 4, 0, 2, 0 ] The whole field definition. - // [a,b) [ 4, 0, 2, 0, 4 ] The label (optional). - // [c,d) [ 4, 0, 2, 0, 5 ] The type (string). - // [e,f) [ 4, 0, 2, 0, 1 ] The name (foo). - // [g,h) [ 4, 0, 2, 0, 3 ] The number (1). - // - // Notes: - // - A location may refer to a repeated field itself (i.e. not to any - // particular index within it). This is used whenever a set of elements are - // logically enclosed in a single code segment. For example, an entire - // extend block (possibly containing multiple extension definitions) will - // have an outer location whose path refers to the "extensions" repeated - // field without an index. - // - Multiple locations may have the same path. This happens when a single - // logical declaration is spread out across multiple places. The most - // obvious example is the "extend" block again -- there may be multiple - // extend blocks in the same scope, each of which will have the same path. - // - A location's span is not always a subset of its parent's span. For - // example, the "extendee" of an extension declaration appears at the - // beginning of the "extend" block and is shared by all extensions within - // the block. - // - Just because a location's span is a subset of some other location's span - // does not mean that it is a descendent. For example, a "group" defines - // both a type and a field in a single declaration. Thus, the locations - // corresponding to the type and field and their components will overlap. - // - Code which tries to interpret locations should probably be designed to - // ignore those that it doesn't understand, as more types of locations could - // be recorded in the future. - repeated Location location = 1; - message Location { - // Identifies which part of the FileDescriptorProto was defined at this - // location. - // - // Each element is a field number or an index. They form a path from - // the root FileDescriptorProto to the place where the definition. For - // example, this path: - // [ 4, 3, 2, 7, 1 ] - // refers to: - // file.message_type(3) // 4, 3 - // .field(7) // 2, 7 - // .name() // 1 - // This is because FileDescriptorProto.message_type has field number 4: - // repeated DescriptorProto message_type = 4; - // and DescriptorProto.field has field number 2: - // repeated FieldDescriptorProto field = 2; - // and FieldDescriptorProto.name has field number 1: - // optional string name = 1; - // - // Thus, the above path gives the location of a field name. If we removed - // the last element: - // [ 4, 3, 2, 7 ] - // this path refers to the whole field declaration (from the beginning - // of the label to the terminating semicolon). - repeated int32 path = 1 [packed=true]; - - // Always has exactly three or four elements: start line, start column, - // end line (optional, otherwise assumed same as start line), end column. - // These are packed into a single field for efficiency. Note that line - // and column numbers are zero-based -- typically you will want to add - // 1 to each before displaying to a user. - repeated int32 span = 2 [packed=true]; - - // TODO(kenton): Record comments appearing before and after the - // declaration. - } -} |