GitSetup 2017-10-26 (1639317d)

Code extracted from:

    https://gitlab.kitware.com/utils/gitsetup.git

at commit 1639317d0774f7729118138e978ca6eec9cf984e (setup).

10 files changed, 4 insertions, 871 deletions

diff --git a/config.sample b/config.sample
deleted file mode 100644
index eeb468b..0000000
--- a/config.sample
+++ /dev/null
@@ -1,32 +0,0 @@
-# Kitware Local Git Setup Scripts - Sample Project Configuration
-#
-# Copy to "config" and edit as necessary.
-
-[hooks]
-	url = http://public.kitware.com/GitSetup.git
-	#branch = hooks
-
-[ssh]
-	host = public.kitware.com
-	key = id_git_public
-	request-url = https://www.kitware.com/Admin/SendPassword.cgi
-
-[stage]
-	#url = git://public.kitware.com/stage/Project.git
-	#pushurl = git@public.kitware.com:stage/Project.git
-
-[gerrit]
-	#project = Project
-	site = http://review.source.kitware.com
-	# pushurl placeholder "$username" is literal
-	pushurl = $username@review.source.kitware.com:Project
-
-[upstream]
-	url = git://public.kitware.com/Project.git
-
-[gitlab]
-	host = gitlab.kitware.com
-	group-path = group
-	group-name = Group
-	project-path = project
-	project-name = Project
diff --git a/git-gerrit-push b/git-gerrit-push
deleted file mode 100755
index b46f753..0000000
--- a/git-gerrit-push
+++ /dev/null
@@ -1,74 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2015 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-USAGE="[<remote>] [--no-topic] [--dry-run] [--]"
-OPTIONS_SPEC=
-SUBDIRECTORY_OK=Yes
-. "$(git --exec-path)/git-sh-setup"
-
-#-----------------------------------------------------------------------------
-
-remote=''
-refspecs=''
-no_topic=''
-dry_run=''
-
-# Parse the command line options.
-while test $# != 0; do
-	case "$1" in
-		--no-topic) no_topic=1 ;;
-		--dry-run)  dry_run=--dry-run ;;
-		--) shift; break ;;
-		-*) usage ;;
-		*) test -z "$remote" || usage ; remote="$1" ;;
-	esac
-	shift
-done
-test $# = 0 || usage
-
-# Default remote.
-test -n "$remote" || remote="gerrit"
-
-if test -z "$no_topic"; then
-	# Identify and validate the topic branch name.
-	head="$(git symbolic-ref HEAD)" && topic="${head#refs/heads/}" || topic=''
-	if test -z "$topic" -o "$topic" = "master"; then
-		die 'Please name your topic:
-		git checkout -b descriptive-name'
-	fi
-	# The topic branch will be pushed by name.
-	refspecs="HEAD:refs/for/master/$topic $refspecs"
-fi
-
-# Fetch the current upstream master branch head.
-# This helps computation of a minimal pack to push.
-echo "Fetching $remote master"
-fetch_out=$(git fetch "$remote" master 2>&1) || die "$fetch_out"
-
-# Exit early if we have nothing to push.
-if test -z "$refspecs"; then
-	echo 'Nothing to push!'
-	exit 0
-fi
-
-# Push.  Save output and exit code.
-echo "Pushing to $remote"
-push_stdout=$(git push --porcelain $dry_run "$remote" $refspecs); push_exit=$?
-echo "$push_stdout"
-
-# Reproduce the push exit code.
-exit $push_exit
diff --git a/git-gitlab-push b/git-gitlab-push
deleted file mode 100755
index 768f853..0000000
--- a/git-gitlab-push
+++ /dev/null
@@ -1,177 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2015 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-USAGE='[<remote>] [<options>...] [--]
-
-OPTIONS
-
---dry-run
-    Show what would be pushed without actually updating the destination
-
--f,--force
-    Force-push the topic HEAD to rewrite the destination branch
-
---no-default
-    Do not push the default branch (e.g. master)
-
---no-topic
-    Do not push the topic HEAD.
-'
-OPTIONS_SPEC=
-SUBDIRECTORY_OK=Yes
-. "$(git --exec-path)/git-sh-setup"
-
-egrep-q() {
-	egrep "$@" >/dev/null 2>/dev/null
-}
-
-# Load the project configuration.
-gitlab_upstream='' &&
-gitlab_configured='' &&
-config="${BASH_SOURCE%/*}/config" &&
-protocol=$(git config -f "$config" --get gitlab.protocol ||
-	   echo "https") &&
-host=$(git config -f "$config" --get gitlab.host) &&
-site=$(git config -f "$config" --get gitlab.site ||
-       echo "$protocol://$host") &&
-group_path=$(git config -f "$config" --get gitlab.group-path) &&
-project_path=$(git config -f "$config" --get gitlab.project-path) &&
-gitlab_upstream="$site/$group_path/$project_path.git" &&
-gitlab_pushurl=$(git config --get remote.gitlab.pushurl ||
-		 git config --get remote.gitlab.url) &&
-gitlab_configured=1
-
-#-----------------------------------------------------------------------------
-
-remote=''
-refspecs=''
-force=''
-lease=false
-lease_flag=''
-no_topic=''
-no_default=''
-dry_run=''
-
-# Parse the command line options.
-while test $# != 0; do
-	case "$1" in
-		-f|--force)   force='+'; lease=true ;;
-		--no-topic)   no_topic=1 ;;
-		--dry-run)    dry_run=--dry-run ;;
-		--no-default) no_default=1 ;;
-		--) shift; break ;;
-		-*) usage ;;
-		*) test -z "$remote" || usage ; remote="$1" ;;
-	esac
-	shift
-done
-test $# = 0 || usage
-
-# Default remote.
-test -n "$remote" || remote="gitlab"
-
-if test -z "$no_topic"; then
-	# Identify and validate the topic branch name.
-	head="$(git symbolic-ref HEAD)" && topic="${head#refs/heads/}" || topic=''
-	if test -z "$topic" -o "$topic" = "master"; then
-		die 'Please name your topic:
-		git checkout -b descriptive-name'
-	fi
-
-	if $lease; then
-		have_ref=false
-		remoteref="refs/remotes/$remote/$topic"
-		if git rev-parse --verify -q "$remoteref"; then
-			have_ref=true
-		else
-			die "It seems that a local ref for the branch is
-missing; forcing a push is dangerous and may overwrite
-previous work.  Fetch from the $remote remote first or
-push without '-f' or '--force'."
-		fi
-
-		have_lease_flag=false
-		if git push -h | egrep-q -e '--force-with-lease'; then
-			have_lease_flag=true
-		fi
-
-		if $have_lease_flag && $have_ref; then
-			# Set the lease flag.
-			lease_flag="--force-with-lease=$topic:$remoteref"
-			# Clear the force string.
-			force=''
-		fi
-	fi
-
-	# The topic branch will be pushed by name.
-	refspecs="${force}HEAD:refs/heads/$topic $refspecs"
-fi
-
-# Fetch the current remote master branch head.
-# This helps computation of a minimal pack to push.
-echo "Fetching $remote master"
-fetch_out=$(git fetch "$remote" master 2>&1) || die "$fetch_out"
-gitlab_head=$(git rev-parse FETCH_HEAD) || exit
-
-# Fetch the current upstream master branch head.
-if origin_fetchurl=$(git config --get remote.origin.url) &&
-   test "$origin_fetchurl" = "$gitlab_upstream"; then
-	upstream_remote='origin'
-else
-	upstream_remote="$gitlab_upstream"
-fi
-echo "Fetching $upstream_remote master"
-fetch_out=$(git fetch "$upstream_remote" master 2>&1) || die "$fetch_out"
-upstream_head=$(git rev-parse FETCH_HEAD) || exit
-
-# Add a refspec to keep the remote master up to date if possible.
-if test -z "$no_default" &&
-   base=$(git merge-base "$gitlab_head" "$upstream_head") &&
-   test "$base" = "$gitlab_head"; then
-	refspecs="$upstream_head:refs/heads/master $refspecs"
-fi
-
-# Exit early if we have nothing to push.
-if test -z "$refspecs"; then
-	echo 'Nothing to push!'
-	exit 0
-fi
-
-# Push.  Save output and exit code.
-echo "Pushing to $remote"
-push_config='-c advice.pushUpdateRejected=false'
-push_stdout=$(git $push_config push $lease_flag --porcelain $dry_run "$remote" $refspecs); push_exit=$?
-echo "$push_stdout"
-
-if test "$push_exit" -ne 0 && test -z "$force"; then
-	# Advise the user to fetch if needed.
-	if echo "$push_stdout" | egrep-q 'stale info'; then
-		echo "
-You have pushed to your branch from another machine; you may be overwriting
-commits unintentionally.  Fetch from the $remote remote and check that you are
-not pushing an outdated branch."
-	fi
-
-	# Advise the user to force-push if needed.
-	if echo "$push_stdout" | egrep-q 'non-fast-forward'; then
-		echo '
-Add "-f" or "--force" to push a rewritten topic.'
-	fi
-fi
-
-# Reproduce the push exit code.
-exit $push_exit
diff --git a/setup-gerrit b/setup-gerrit
deleted file mode 100755
index 6d46e3c..0000000
--- a/setup-gerrit
+++ /dev/null
@@ -1,147 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2012 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# Run this script to set up the local Git repository to push to
-# a Gerrit Code Review instance for this project.
-
-# Project configuration instructions:
-#
-# - Run a Gerrit Code Review server
-#
-# - Populate adjacent "config" file with:
-#    gerrit.site = Top Gerrit URL (not project-specific)
-#    gerrit.project = Name of project in Gerrit
-#    gerrit.pushurl = Review site push URL with "$username" placeholder
-#    gerrit.remote = Gerrit remote name, if not "gerrit"
-#    gerrit.url = Gerrit project URL, if not "$site/p/$project"
-#                 optionally with "$username" placeholder
-
-die() {
-	echo 1>&2 "$@" ; exit 1
-}
-
-# Make sure we are inside the repository.
-cd "${BASH_SOURCE%/*}" &&
-
-# Load the project configuration.
-site=$(git config -f config --get gerrit.site) &&
-project=$(git config -f config --get gerrit.project) &&
-remote=$(git config -f config --get gerrit.remote ||
-	 echo "gerrit") &&
-fetchurl_=$(git config -f config --get gerrit.url ||
-	    echo "$site/p/$project") &&
-pushurl_=$(git config -f config --get gerrit.pushurl ||
-	   git config -f config --get gerrit.url) ||
-die 'This project is not configured to use Gerrit.'
-
-# Get current gerrit push URL.
-pushurl=$(git config --get remote."$remote".pushurl ||
-	  git config --get remote."$remote".url || echo '') &&
-
-# Tell user about current configuration.
-if test -n "$pushurl"; then
-	echo 'Remote "'"$remote"'" is currently configured to push to
-
-  '"$pushurl"'
-' &&
-	read -ep 'Reconfigure Gerrit? [y/N]: ' ans &&
-	if [ "$ans" == "y" ] || [ "$ans" == "Y" ]; then
-		setup=1
-	else
-		setup=''
-	fi
-else
-	echo 'Remote "'"$remote"'" is not yet configured.
-
-'"$project"' changes must be pushed to our Gerrit Code Review site:
-
-  '"$site/p/$project"'
-
-Register a Gerrit account and select a username (used below).
-You will need an OpenID:
-
-  http://openid.net/get-an-openid/
-' &&
-	read -ep 'Configure Gerrit? [Y/n]: ' ans &&
-	if [ "$ans" == "n" ] || [ "$ans" == "N" ]; then
-		exit 0
-	else
-		setup=1
-	fi
-fi &&
-
-# Perform setup if necessary.
-if test -n "$setup"; then
-	echo 'Sign-in to Gerrit to get/set your username at
-
-  '"$site"'/#/settings
-
-Add your SSH public keys at
-
-  '"$site"'/#/settings/ssh-keys
-' &&
-	read -ep "Gerrit username? [$USER]: " gu &&
-	if test -z "$gu"; then
-		gu="$USER"
-	fi &&
-	fetchurl="${fetchurl_/\$username/$gu}" &&
-	if test -z "$pushurl"; then
-		git remote add "$remote" "$fetchurl"
-	else
-		git config remote."$remote".url "$fetchurl"
-	fi &&
-	pushurl="${pushurl_/\$username/$gu}" &&
-	if test "$pushurl" != "$fetchurl"; then
-		git config remote."$remote".pushurl "$pushurl"
-	fi &&
-	echo 'Remote "'"$remote"'" is now configured to push to
-
-  '"$pushurl"'
-'
-fi &&
-
-# Optionally test Gerrit access.
-if test -n "$pushurl"; then
-	read -ep 'Test access to Gerrit (SSH)? [y/N]: ' ans &&
-	if [ "$ans" == "y" ] || [ "$ans" == "Y" ]; then
-		echo -n 'Testing Gerrit access by SSH...'
-		if git ls-remote --heads "$pushurl" >/dev/null; then
-			echo 'passed.'
-		else
-			echo 'failed.' &&
-			die 'Could not access Gerrit.  Add your SSH public keys at
-
-  '"$site"'/#/settings/ssh-keys
-'
-		fi
-	fi
-fi &&
-
-# Set up GerritId hook.
-hook=$(git config --get hooks.GerritId || echo '') &&
-if test -z "$hook"; then
-	echo '
-Enabling GerritId hook to add a "Change-Id" footer to commit
-messages for interaction with Gerrit.  Run
-
-  git config hooks.GerritId false
-
-to disable this feature (but you will be on your own).' &&
-	git config hooks.GerritId true
-else
-	echo 'GerritId hook already configured to "'"$hook"'".'
-fi
diff --git a/setup-gitlab b/setup-gitlab
deleted file mode 100755
index 9c7574d..0000000
--- a/setup-gitlab
+++ /dev/null
@@ -1,140 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2015 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# Run this script to set up the local Git repository to push to
-# a personal fork for this project in GitLab.
-
-# Project configuration instructions:
-#
-# - Run a GitLab server
-#
-# - Populate adjacent "config" file with:
-#    gitlab.protocol = Top GitLab protocol, if not 'https'
-#    gitlab.host = Top GitLab fully qualified host name
-#    gitlab.site = Top GitLab URL, if not "<protocol>://<host>"
-#    gitlab.group-name = Name of group containing project in GitLab
-#    gitlab.group-path = Path of group containing project in GitLab
-#    gitlab.project-name = Name of project within GitLab group
-#    gitlab.project-path = Path of project within GitLab group
-#    gitlab.url = GitLab push URL with "$username" placeholder,
-#                 if not "<site>/$username/<project-path>.git"
-#    gitlab.pushurl = GitLab push URL with "$username" placeholder,
-#                     if not "git@<host>:$username/<project-path>.git"
-#    gitlab.remote = GitLab remote name, if not "gitlab"
-
-die() {
-	echo 1>&2 "$@" ; exit 1
-}
-
-# Make sure we are inside the repository.
-cd "${BASH_SOURCE%/*}" &&
-
-# Load the project configuration.
-protocol=$(git config -f config --get gitlab.protocol ||
-	   echo "https") &&
-host=$(git config -f config --get gitlab.host) &&
-site=$(git config -f config --get gitlab.site ||
-       echo "$protocol://$host") &&
-group_path=$(git config -f config --get gitlab.group-path) &&
-group_name=$(git config -f config --get gitlab.group-name) &&
-project_name=$(git config -f config --get gitlab.project-name) &&
-project_path=$(git config -f config --get gitlab.project-path) &&
-pushurl_=$(git config -f config --get gitlab.pushurl ||
-	   echo "git@$host:\$username/$project_path.git") &&
-remote=$(git config -f config --get gitlab.remote ||
-	 echo "gitlab") &&
-fetchurl_=$(git config -f config --get gitlab.url ||
-	    echo "$site/\$username/$project_path.git") ||
-die 'This project is not configured to use GitLab.'
-
-# Get current gitlab push URL.
-pushurl=$(git config --get remote."$remote".pushurl ||
-	  git config --get remote."$remote".url || echo '') &&
-
-# Tell user about current configuration.
-if test -n "$pushurl"; then
-	echo 'Remote "'"$remote"'" is currently configured to push to
-
-  '"$pushurl"'
-' &&
-	read -ep 'Reconfigure GitLab? [y/N]: ' ans &&
-	if [ "$ans" == "y" ] || [ "$ans" == "Y" ]; then
-		setup=1
-	else
-		setup=''
-	fi
-else
-	echo 'Remote "'"$remote"'" is not yet configured.
-' &&
-	read -ep 'Configure GitLab to contribute to '"$project_name"'? [Y/n]: ' ans &&
-	if [ "$ans" == "n" ] || [ "$ans" == "N" ]; then
-		exit 0
-	else
-		setup=1
-	fi
-fi &&
-
-setup_instructions='Add your SSH public keys at
-
-  '"$site"'/profile/keys
-
-Then visit the main repository at:
-
-  '"$site/$group_path/$project_path"'
-
-and use the Fork button in the upper right.
-'
-
-# Perform setup if necessary.
-if test -n "$setup"; then
-	echo 'Sign-in to GitLab to get/set your username at
-
-  '"$site/profile/account"'
-
-'"$setup_instructions" &&
-	read -ep "GitLab username? [$USER]: " gu &&
-	if test -z "$gu"; then
-		gu="$USER"
-	fi &&
-	fetchurl="${fetchurl_/\$username/$gu}" &&
-	if test -z "$pushurl"; then
-		git remote add "$remote" "$fetchurl"
-	else
-		git config remote."$remote".url "$fetchurl"
-	fi &&
-	pushurl="${pushurl_/\$username/$gu}" &&
-	git config remote."$remote".pushurl "$pushurl" &&
-	echo 'Remote "'"$remote"'" is now configured to push to
-
-  '"$pushurl"'
-'
-fi &&
-
-# Optionally test GitLab access.
-if test -n "$pushurl"; then
-	read -ep 'Test access to GitLab (SSH)? [y/N]: ' ans &&
-	if [ "$ans" == "y" ] || [ "$ans" == "Y" ]; then
-		echo -n 'Testing GitLab access by SSH...'
-		if git ls-remote --heads "$pushurl" >/dev/null; then
-			echo 'passed.'
-		else
-			echo 'failed.' &&
-			die 'Could not access your GitLab fork of this project.
-'"$setup_instructions"
-		fi
-	fi
-fi
diff --git a/setup-hooks b/setup-hooks
index ca07712..6a17b10 100755
--- a/setup-hooks
+++ b/setup-hooks
@@ -26,7 +26,7 @@
 #    hooks.url    = Repository URL publishing "hooks" branch
 #    hooks.branch = Repository branch instead of "hooks"
 
-egrep-q() {
+egrep_q() {
 	egrep "$@" >/dev/null 2>/dev/null
 }
 
@@ -42,7 +42,7 @@ if url=$(git config --get hooks.url); then
 	# Fetch hooks from locally configured repository.
 	branch=$(git config hooks.branch || echo hooks)
 elif git for-each-ref refs/remotes/origin/hooks 2>/dev/null |
-     egrep-q 'refs/remotes/origin/hooks$'; then
+     egrep_q 'refs/remotes/origin/hooks$'; then
 	# Use hooks cloned from origin.
 	url=.. && branch=remotes/origin/hooks
 elif url=$(git config -f config --get hooks.url); then
diff --git a/setup-ssh b/setup-ssh
deleted file mode 100755
index 8920a5b..0000000
--- a/setup-ssh
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2012 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# Run this script to set up ssh push access to the repository host.
-
-# Project configuration instructions:
-#
-# - Populate adjacent "config" file with:
-#    ssh.host = Repository host name
-#    ssh.user = Username on host, if not "git"
-#    ssh.key = Local ssh key name
-#    ssh.request-url = Web page URL to request ssh access
-
-egrep-q() {
-	egrep "$@" >/dev/null 2>/dev/null
-}
-
-die() {
-	echo 1>&2 "$@" ; exit 1
-}
-
-# Make sure we are inside the repository.
-cd "${BASH_SOURCE%/*}" &&
-
-# Load the project configuration.
-host=$(git config -f config --get ssh.host) &&
-user=$(git config -f config --get ssh.user || echo git) &&
-key=$(git config -f config --get ssh.key) &&
-request_url=$(git config -f config --get ssh.request-url) ||
-die 'This project is not configured for ssh push access.'
-
-# Check for existing configuration.
-if test -r ~/.ssh/config &&
-   egrep-q 'Host[= ]'"${host//\./\\.}" ~/.ssh/config; then
-	echo 'Host "'"$host"'" is already in ~/.ssh/config' &&
-	setup= &&
-	question='Test'
-else
-	echo 'Host "'"$host"'" not found in ~/.ssh/config' &&
-	setup=1 &&
-	question='Setup and test'
-fi &&
-
-# Ask the user whether to make changes.
-echo '' &&
-read -ep "${question} push access by ssh to $user@$host? [y/N]: " access &&
-if test "$access" != "y" -a "$access" != "Y"; then
-	exit 0
-fi &&
-
-# Setup host configuration if necessary.
-if test -n "$setup"; then
-	if ! test -d ~/.ssh; then
-		mkdir -p ~/.ssh &&
-		chmod 700 ~/.ssh
-	fi &&
-	if ! test -f ~/.ssh/config; then
-		touch ~/.ssh/config &&
-		chmod 600 ~/.ssh/config
-	fi &&
-	ssh_config='Host='"$host"'
-  IdentityFile ~/.ssh/'"$key" &&
-	echo "Adding to ~/.ssh/config:
-
-$ssh_config
-" &&
-	echo "$ssh_config" >> ~/.ssh/config &&
-	if ! test -e ~/.ssh/"$key"; then
-		if test -f ~/.ssh/id_rsa; then
-			# Take care of the common case.
-			ln -s id_rsa ~/.ssh/"$key"
-			echo '
-Assuming ~/.ssh/id_rsa is the private key corresponding to the public key for
-
-  '"$user@$host"'
-
-If this is incorrect place private key at "~/.ssh/'"$key"'".'
-		else
-			echo '
-Place the private key corresponding to the public key registered for
-
-  '"$user@$host"'
-
-at "~/.ssh/'"$key"'".'
-		fi
-		read -e -n 1 -p 'Press any key to continue...'
-	fi
-fi || exit 1
-
-# Test access configuration.
-echo 'Testing ssh push access to "'"$user@$host"'"...' &&
-if ! ssh "$user@$host" info; then
-	die 'No ssh push access to "'"$user@$host"'".  You may need to request access at
-
-  '"$request_url"'
-'
-fi
diff --git a/setup-stage b/setup-stage
deleted file mode 100755
index ce6ec45..0000000
--- a/setup-stage
+++ /dev/null
@@ -1,82 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2012 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# Run this script to set up the topic stage for pushing changes.
-
-# Project configuration instructions:
-#
-# - Run a Topic Stage repository next to the main project repository.
-#
-# - Populate adjacent "config" file with:
-#    stage.url = Topic Stage repository URL
-#    stage.pushurl = Topic Stage push URL if not "$url"
-
-egrep-q() {
-	egrep "$@" >/dev/null 2>/dev/null
-}
-
-die() {
-	echo 1>&2 "$@" ; exit 1
-}
-
-# Make sure we are inside the repository.
-cd "${BASH_SOURCE%/*}" &&
-
-# Load the project configuration.
-fetchurl_=$(git config -f config --get stage.url) &&
-pushurl_=$(git config -f config --get stage.pushurl || echo "$fetchurl_") &&
-remote=$(git config -f config --get stage.remote || echo 'stage') ||
-die 'This project is not configured to use a topic stage.'
-
-# Get current stage push URL.
-pushurl=$(git config --get remote."$remote".pushurl ||
-	  git config --get remote."$remote".url || echo '') &&
-
-# Tell user about current configuration.
-if test -n "$pushurl"; then
-	echo 'Remote "'"$remote"'" is currently configured to push to
-
-  '"$pushurl"'
-' &&
-	read -ep 'Reconfigure Topic Stage? [y/N]: ' ans &&
-	if [ "$ans" == "y" ] || [ "$ans" == "Y" ]; then
-		setup=1
-	else
-		setup=''
-	fi
-else
-	setup=1
-fi
-
-# Perform setup if necessary.
-if test -n "$setup"; then
-	echo 'Setting up the topic stage...' &&
-	fetchurl="${fetchurl_}" &&
-	if test -z "$pushurl"; then
-		git remote add "$remote" "$fetchurl"
-	else
-		git config remote."$remote".url "$fetchurl"
-	fi &&
-	pushurl="${pushurl_}" &&
-	if test "$pushurl" != "$fetchurl"; then
-		git config remote."$remote".pushurl "$pushurl"
-	fi &&
-	echo 'Remote "'"$remote"'" is now configured to push to
-
-  '"$pushurl"'
-'
-fi || die 'Could not configure the topic stage remote.'
diff --git a/setup-upstream b/setup-upstream
deleted file mode 100755
index 92ce1da..0000000
--- a/setup-upstream
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2015 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# Run this script to set up the local Git repository to use the
-# preferred upstream repository URLs.
-
-# Project configuration instructions:
-#
-# - Populate adjacent "config" file with:
-#    upstream.url = Preferred fetch url for upstream remote
-#    upstream.remote = Preferred name for upstream remote, if not "origin"
-
-die() {
-	echo 1>&2 "$@" ; exit 1
-}
-
-# Make sure we are inside the repository.
-cd "${BASH_SOURCE%/*}" &&
-
-# Load the project configuration.
-url=$(git config -f config --get upstream.url) &&
-remote=$(git config -f config --get upstream.remote ||
-	 echo 'origin') ||
-die 'This project is not configured to use a preferred upstream repository.'
-
-# Get current upstream URLs.
-fetchurl=$(git config --get remote."$remote".url || echo '') &&
-pushurl=$(git config --get remote."$remote".pushurl || echo '') &&
-
-if test "$fetchurl" = "$url"; then
-	echo 'Remote "'"$remote"'" already uses recommended upstream repository.'
-	exit 0
-fi
-
-upstream_recommend='
-We recommended configuring the "'"$remote"'" remote to fetch from upstream at
-
-  '"$url"'
-'
-
-# Tell user about current configuration.
-if test -n "$fetchurl"; then
-	echo 'Remote "'"$remote"'" is currently configured to fetch from
-
-  '"$fetchurl"'
-' &&
-	if test -n "$pushurl"; then
-		echo 'and push to
-
-  '"$pushurl"
-	fi &&
-	echo "$upstream_recommend" &&
-	if test -n "$pushurl"; then
-		echo 'and to never push to it directly.
-'
-	fi &&
-
-	read -ep 'Reconfigure "'"$remote"'" remote as recommended? [y/N]: ' ans &&
-	if [ "$ans" == "y" ] || [ "$ans" == "Y" ]; then
-		setup=1
-	else
-		setup=''
-	fi
-else
-	echo 'Remote "'"$remote"'" is not yet configured.' &&
-	echo "$upstream_recommend" &&
-	read -ep 'Configure "'"$remote"'" remote as recommended? [Y/n]: ' ans &&
-	if [ "$ans" == "n" ] || [ "$ans" == "N" ]; then
-		exit 0
-	else
-		setup=1
-	fi
-fi &&
-
-# Perform setup if necessary.
-if test -n "$setup"; then
-	if test -z "$fetchurl"; then
-		git remote add "$remote" "$url"
-	else
-		git config remote."$remote".url "$url" &&
-		if old=$(git config --get remote."$remote".pushurl); then
-			git config --unset remote."$remote".pushurl ||
-			echo 'Warning: failed to unset remote.'"$remote"'.pushurl'
-		fi
-	fi &&
-	echo 'Remote "'"$remote"'" is now configured to fetch from
-
-  '"$url"'
-'
-fi
diff --git a/tips b/tips
index 784e1ed..f47d84c 100755
--- a/tips
+++ b/tips
@@ -19,7 +19,7 @@
 
 # Project configuration instructions: NONE
 
-egrep-q() {
+egrep_q() {
 	egrep "$@" >/dev/null 2>/dev/null
 }
 
@@ -33,7 +33,7 @@ One may enable color output from Git commands with
 fi
 
 # Suggest bash completion.
-if ! bash -i -c 'echo $PS1' | egrep-q '__git_ps1'; then
+if ! bash -i -c 'echo $PS1' | egrep_q '__git_ps1'; then
 	echo '
 A dynamic, informative Git shell prompt can be obtained by sourcing
 the git bash-completion script in your "~/.bashrc".  Set the PS1