summaryrefslogtreecommitdiffstats
path: root/Modules/readme.txt
diff options
context:
space:
mode:
authorAlex Neundorf <neundorf@kde.org>2013-03-26 17:52:30 (GMT)
committerBrad King <brad.king@kitware.com>2013-03-28 14:38:49 (GMT)
commit140692d84c5af2d203bff80707ad0f89fb3e3567 (patch)
tree4cb47fa4244d5dee54708afbd9471cfb0756f95f /Modules/readme.txt
parent2fcb06039daa4492c05fa346465028ea0b3d4eff (diff)
downloadCMake-140692d84c5af2d203bff80707ad0f89fb3e3567.zip
CMake-140692d84c5af2d203bff80707ad0f89fb3e3567.tar.gz
CMake-140692d84c5af2d203bff80707ad0f89fb3e3567.tar.bz2
Modules/readme.txt: switch from "XXX" to "Xxx"
Using XXX as name of the package is ambiguous, since it can be interpreted as "ALLUPPERCASE" and also as "ExactCase (if the name is already ALLUPPERCASE)". After extensive discussion there is the conclusion that ExactCase is intended, so using a CamelCased name makes that more obvious. Alex
Diffstat (limited to 'Modules/readme.txt')
-rw-r--r--Modules/readme.txt94
1 files changed, 47 insertions, 47 deletions
diff --git a/Modules/readme.txt b/Modules/readme.txt
index 9dc1c6a..503f91a 100644
--- a/Modules/readme.txt
+++ b/Modules/readme.txt
@@ -1,46 +1,46 @@
For more information about how to contribute modules to CMake, see this page:
http://www.itk.org/Wiki/CMake:Module_Maintainers
-Note to authors of FindXXX.cmake files
+Note to authors of FindXxx.cmake files
-We would like all FindXXX.cmake files to produce consistent variable names.
+We would like all FindXxx.cmake files to produce consistent variable names.
Please use the following consistent variable names for general use.
-XXX_INCLUDE_DIRS The final set of include directories listed in one variable for use by client code. This should not be a cache entry.
-XXX_LIBRARIES The libraries to link against to use XXX. These should include full paths. This should not be a cache entry.
-XXX_DEFINITIONS Definitions to use when compiling code that uses XXX. This really shouldn't include options such as (-DHAS_JPEG)that a client source-code file uses to decide whether to #include <jpeg.h>
-XXX_EXECUTABLE Where to find the XXX tool.
-XXX_YYY_EXECUTABLE Where to find the YYY tool that comes with XXX.
-XXX_LIBRARY_DIRS Optionally, the final set of library directories listed in one variable for use by client code. This should not be a cache entry.
-XXX_ROOT_DIR Where to find the base directory of XXX.
-XXX_VERSION_YY Expect Version YY if true. Make sure at most one of these is ever true.
-XXX_WRAP_YY If False, do not try to use the relevent CMake wrapping command.
-XXX_YY_FOUND If False, optional YY part of XXX sytem is not available.
-XXX_FOUND Set to false, or undefined, if we haven't found, or don't want to use XXX.
-XXX_NOT_FOUND_MESSAGE Should be set by config-files in the case that it has set XXX_FOUND to FALSE.
+Xxx_INCLUDE_DIRS The final set of include directories listed in one variable for use by client code. This should not be a cache entry.
+Xxx_LIBRARIES The libraries to link against to use Xxx. These should include full paths. This should not be a cache entry.
+Xxx_DEFINITIONS Definitions to use when compiling code that uses Xxx. This really shouldn't include options such as (-DHAS_JPEG)that a client source-code file uses to decide whether to #include <jpeg.h>
+Xxx_EXECUTABLE Where to find the Xxx tool.
+Xxx_Yyy_EXECUTABLE Where to find the Yyy tool that comes with Xxx.
+Xxx_LIBRARY_DIRS Optionally, the final set of library directories listed in one variable for use by client code. This should not be a cache entry.
+Xxx_ROOT_DIR Where to find the base directory of Xxx.
+Xxx_VERSION_Yy Expect Version Yy if true. Make sure at most one of these is ever true.
+Xxx_WRAP_Yy If False, do not try to use the relevent CMake wrapping command.
+Xxx_Yy_FOUND If False, optional Yy part of Xxx sytem is not available.
+Xxx_FOUND Set to false, or undefined, if we haven't found, or don't want to use Xxx.
+Xxx_NOT_FOUND_MESSAGE Should be set by config-files in the case that it has set Xxx_FOUND to FALSE.
The contained message will be printed by the find_package() command and by
find_package_handle_standard_args() to inform the user about the problem.
-XXX_RUNTIME_LIBRARY_DIRS Optionally, the runtime library search path for use when running an executable linked to shared libraries.
+Xxx_RUNTIME_LIBRARY_DIRS Optionally, the runtime library search path for use when running an executable linked to shared libraries.
The list should be used by user code to create the PATH on windows or LD_LIBRARY_PATH on unix.
This should not be a cache entry.
-XXX_VERSION_STRING A human-readable string containing the version of the package found, if any.
-XXX_VERSION_MAJOR The major version of the package found, if any.
-XXX_VERSION_MINOR The minor version of the package found, if any.
-XXX_VERSION_PATCH The patch version of the package found, if any.
+Xxx_VERSION_STRING A human-readable string containing the version of the package found, if any.
+Xxx_VERSION_MAJOR The major version of the package found, if any.
+Xxx_VERSION_MINOR The minor version of the package found, if any.
+Xxx_VERSION_PATCH The patch version of the package found, if any.
-You do not have to provide all of the above variables. You should provide XXX_FOUND under most circumstances. If XXX is a library, then XXX_LIBRARIES, should also be defined, and XXX_INCLUDE_DIRS should usually be defined (I guess libm.a might be an exception)
+You do not have to provide all of the above variables. You should provide Xxx_FOUND under most circumstances. If Xxx is a library, then Xxx_LIBRARIES, should also be defined, and Xxx_INCLUDE_DIRS should usually be defined (I guess libm.a might be an exception)
The following names should not usually be used in CMakeLists.txt files, but they may be usefully modified in users' CMake Caches to control stuff.
-XXX_LIBRARY Name of XXX Library. A User may set this and XXX_INCLUDE_DIR to ignore to force non-use of XXX.
-XXX_YY_LIBRARY Name of YY library that is part of the XXX system. It may or may not be required to use XXX.
-XXX_INCLUDE_DIR Where to find xxx.h, etc. (XXX_INCLUDE_PATH was considered bad because a path includes an actual filename.)
-XXX_YY_INCLUDE_DIR Where to find xxx_yy.h, etc.
+Xxx_LIBRARY Name of Xxx Library. A User may set this and Xxx_INCLUDE_DIR to ignore to force non-use of Xxx.
+Xxx_Yy_LIBRARY Name of Yy library that is part of the Xxx system. It may or may not be required to use Xxx.
+Xxx_INCLUDE_DIR Where to find xxx.h, etc. (Xxx_INCLUDE_PATH was considered bad because a path includes an actual filename.)
+Xxx_Yy_INCLUDE_DIR Where to find xxx_yy.h, etc.
-For tidiness's sake, try to keep as many options as possible out of the cache, leaving at least one option which can be used to disable use of the module, or locate a not-found library (e.g. XXX_ROOT_DIR). For the same reason, mark most cache options as advanced.
+For tidiness's sake, try to keep as many options as possible out of the cache, leaving at least one option which can be used to disable use of the module, or locate a not-found library (e.g. Xxx_ROOT_DIR). For the same reason, mark most cache options as advanced.
-If you need other commands to do special things then it should still begin with XXX_. This gives a sort of namespace effect and keeps things tidy for the user. You should put comments describing all the exported settings, plus descriptions of any the users can use to control stuff.
+If you need other commands to do special things then it should still begin with Xxx_. This gives a sort of namespace effect and keeps things tidy for the user. You should put comments describing all the exported settings, plus descriptions of any the users can use to control stuff.
You really should also provide backwards compatibility any old settings that were actually in use. Make sure you comment them as deprecated, so that no-one starts using them.
@@ -67,7 +67,7 @@ For example:
# VAR_REALLY_COOL - cool right?
#
-Test the documentation formatting by running "cmake --help-module FindXXX".
+Test the documentation formatting by running "cmake --help-module FindXxx".
Edit the comments until the output of this command looks satisfactory.
To have a .cmake file in this directory NOT show up in the
@@ -93,38 +93,38 @@ copyright and licence notice block like this one:
The layout of the notice block is strictly enforced by the ModuleNotices test.
Only the year range and name may be changed freely.
-A FindXXX.cmake module will typically be loaded by the command
+A FindXxx.cmake module will typically be loaded by the command
- FIND_PACKAGE(XXX [major[.minor[.patch[.tweak]]]] [EXACT]
+ FIND_PACKAGE(Xxx [major[.minor[.patch[.tweak]]]] [EXACT]
[QUIET] [[REQUIRED|COMPONENTS] [components...]])
If any version numbers are given to the command it will set the
following variables before loading the module:
- XXX_FIND_VERSION = full requested version string
- XXX_FIND_VERSION_MAJOR = major version if requested, else 0
- XXX_FIND_VERSION_MINOR = minor version if requested, else 0
- XXX_FIND_VERSION_PATCH = patch version if requested, else 0
- XXX_FIND_VERSION_TWEAK = tweak version if requested, else 0
- XXX_FIND_VERSION_COUNT = number of version components, 0 to 4
- XXX_FIND_VERSION_EXACT = true if EXACT option was given
+ Xxx_FIND_VERSION = full requested version string
+ Xxx_FIND_VERSION_MAJOR = major version if requested, else 0
+ Xxx_FIND_VERSION_MINOR = minor version if requested, else 0
+ Xxx_FIND_VERSION_PATCH = patch version if requested, else 0
+ Xxx_FIND_VERSION_TWEAK = tweak version if requested, else 0
+ Xxx_FIND_VERSION_COUNT = number of version components, 0 to 4
+ Xxx_FIND_VERSION_EXACT = true if EXACT option was given
If the find module supports versioning it should locate a version of
the package that is compatible with the version requested. If a
compatible version of the package cannot be found the module should
not report success. The version of the package found should be stored
-in "XXX_VERSION..." version variables documented by the module.
+in "Xxx_VERSION..." version variables documented by the module.
If the QUIET option is given to the command it will set the variable
-XXX_FIND_QUIETLY to true before loading the FindXXX.cmake module. If
+Xxx_FIND_QUIETLY to true before loading the FindXxx.cmake module. If
this variable is set the module should not complain about not being
able to find the package. If the
REQUIRED option is given to the command it will set the variable
-XXX_FIND_REQUIRED to true before loading the FindXXX.cmake module. If
+Xxx_FIND_REQUIRED to true before loading the FindXxx.cmake module. If
this variable is set the module should issue a FATAL_ERROR if the
package cannot be found.
If neither the QUIET nor REQUIRED options are given then the
-FindXXX.cmake module should look for the package and complain without
+FindXxx.cmake module should look for the package and complain without
error if the module is not found.
FIND_PACKAGE() will set the variable CMAKE_FIND_PACKAGE_NAME to
@@ -133,19 +133,19 @@ contain the actual name of the package.
A package can provide sub-components.
Those components can be listed after the COMPONENTS (or REQUIRED)
or OPTIONAL_COMPONENTS keywords. The set of all listed components will be
-specified in a XXX_FIND_COMPONENTS variable.
-For each package-specific component, say Yyy, a variable XXX_FIND_REQUIRED_Yyy
+specified in a Xxx_FIND_COMPONENTS variable.
+For each package-specific component, say Yyy, a variable Xxx_FIND_REQUIRED_Yyy
will be set to true if it listed after COMPONENTS and it will be set to false
if it was listed after OPTIONAL_COMPONENTS.
-Using those variables a FindXXX.cmake module and also a XXXConfig.cmake package
+Using those variables a FindXxx.cmake module and also a XxxConfig.cmake package
configuration file can determine whether and which components have been requested,
and whether they were requested as required or as optional.
-For each of the requested components a XXX_Yyy_FOUND variable should be set
+For each of the requested components a Xxx_Yyy_FOUND variable should be set
accordingly.
-The per-package XXX_FOUND variable should be only set to true if all requested
+The per-package Xxx_FOUND variable should be only set to true if all requested
required components have been found. A missing optional component should not
-keep the XXX_FOUND variable from being set to true.
-If the package provides XXX_INCLUDE_DIRS and XXX_LIBRARIES variables, the include
+keep the Xxx_FOUND variable from being set to true.
+If the package provides Xxx_INCLUDE_DIRS and Xxx_LIBRARIES variables, the include
dirs and libraries for all components which were requested and which have been
found should be added to those two variables.