diff options
Diffstat (limited to 'Utilities/cmcurl/include/curl/curl.h')
| -rw-r--r-- | Utilities/cmcurl/include/curl/curl.h | 193 |
1 files changed, 149 insertions, 44 deletions
diff --git a/Utilities/cmcurl/include/curl/curl.h b/Utilities/cmcurl/include/curl/curl.h index e8e3ed1..51f6468 100644 --- a/Utilities/cmcurl/include/curl/curl.h +++ b/Utilities/cmcurl/include/curl/curl.h @@ -11,7 +11,7 @@ * * This software is licensed as described in the file COPYING, which * you should have received as part of this distribution. The terms - * are also available at https://curl.haxx.se/docs/copyright.html. + * are also available at https://curl.se/docs/copyright.html. * * You may opt to use, copy, modify, merge, publish, distribute and/or sell * copies of the Software, and permit persons to whom the Software is @@ -24,7 +24,7 @@ /* * If you have libcurl problems, all docs and details are found here: - * https://curl.haxx.se/libcurl/ + * https://curl.se/libcurl/ * * curl-library mailing list subscription and unsubscription web interface: * https://cool.haxx.se/mailman/listinfo/curl-library/ @@ -74,7 +74,7 @@ #if defined(_AIX) || defined(__NOVELL_LIBC__) || defined(__NetBSD__) || \ defined(__minix) || defined(__SYMBIAN32__) || defined(__INTEGRITY) || \ defined(ANDROID) || defined(__ANDROID__) || defined(__OpenBSD__) || \ - defined(__CYGWIN__) || \ + defined(__CYGWIN__) || defined(AMIGA) || \ (defined(__FreeBSD_version) && (__FreeBSD_version < 800000)) #include <sys/select.h> #endif @@ -610,6 +610,7 @@ typedef enum { error */ CURLE_HTTP3, /* 95 - An HTTP/3 layer problem */ CURLE_QUIC_CONNECT_ERROR, /* 96 - QUIC connection error */ + CURLE_PROXY, /* 97 - proxy handshake error */ CURL_LAST /* never use! */ } CURLcode; @@ -689,6 +690,48 @@ typedef enum { #endif /*!CURL_NO_OLDIES*/ +/* + * Proxy error codes. Returned in CURLINFO_PROXY_ERROR if CURLE_PROXY was + * return for the transfers. + */ +typedef enum { + CURLPX_OK, + CURLPX_BAD_ADDRESS_TYPE, + CURLPX_BAD_VERSION, + CURLPX_CLOSED, + CURLPX_GSSAPI, + CURLPX_GSSAPI_PERMSG, + CURLPX_GSSAPI_PROTECTION, + CURLPX_IDENTD, + CURLPX_IDENTD_DIFFER, + CURLPX_LONG_HOSTNAME, + CURLPX_LONG_PASSWD, + CURLPX_LONG_USER, + CURLPX_NO_AUTH, + CURLPX_RECV_ADDRESS, + CURLPX_RECV_AUTH, + CURLPX_RECV_CONNECT, + CURLPX_RECV_REQACK, + CURLPX_REPLY_ADDRESS_TYPE_NOT_SUPPORTED, + CURLPX_REPLY_COMMAND_NOT_SUPPORTED, + CURLPX_REPLY_CONNECTION_REFUSED, + CURLPX_REPLY_GENERAL_SERVER_FAILURE, + CURLPX_REPLY_HOST_UNREACHABLE, + CURLPX_REPLY_NETWORK_UNREACHABLE, + CURLPX_REPLY_NOT_ALLOWED, + CURLPX_REPLY_TTL_EXPIRED, + CURLPX_REPLY_UNASSIGNED, + CURLPX_REQUEST_FAILED, + CURLPX_RESOLVE_HOST, + CURLPX_SEND_AUTH, + CURLPX_SEND_CONNECT, + CURLPX_SEND_REQUEST, + CURLPX_UNKNOWN_FAIL, + CURLPX_UNKNOWN_MODE, + CURLPX_USER_REJECTED, + CURLPX_LAST /* never use */ +} CURLproxycode; + /* This prototype applies to all conversion callbacks */ typedef CURLcode (*curl_conv_callback)(char *buffer, size_t length); @@ -789,6 +832,7 @@ enum curl_khstat { CURLKHSTAT_DEFER, /* do not accept it, but we can't answer right now so this causes a CURLE_DEFER error but otherwise the connection will be left intact etc */ + CURLKHSTAT_FINE_REPLACE, /* accept and replace the wrong key*/ CURLKHSTAT_LAST /* not for use, only a marker for last-in-list */ }; @@ -905,13 +949,42 @@ typedef enum { #define CURLHEADER_SEPARATE (1<<0) /* CURLALTSVC_* are bits for the CURLOPT_ALTSVC_CTRL option */ -#define CURLALTSVC_IMMEDIATELY (1<<0) - #define CURLALTSVC_READONLYFILE (1<<2) #define CURLALTSVC_H1 (1<<3) #define CURLALTSVC_H2 (1<<4) #define CURLALTSVC_H3 (1<<5) + +struct curl_hstsentry { + char *name; + size_t namelen; + unsigned int includeSubDomains:1; + char expire[18]; /* YYYYMMDD HH:MM:SS [null-terminated] */ +}; + +struct curl_index { + size_t index; /* the provided entry's "index" or count */ + size_t total; /* total number of entries to save */ +}; + +typedef enum { + CURLSTS_OK, + CURLSTS_DONE, + CURLSTS_FAIL +} CURLSTScode; + +typedef CURLSTScode (*curl_hstsread_callback)(CURL *easy, + struct curl_hstsentry *e, + void *userp); +typedef CURLSTScode (*curl_hstswrite_callback)(CURL *easy, + struct curl_hstsentry *e, + struct curl_index *i, + void *userp); + +/* CURLHSTS_* are bits for the CURLOPT_HSTS option */ +#define CURLHSTS_ENABLE (long)(1<<0) +#define CURLHSTS_READONLYFILE (long)(1<<1) + /* CURLPROTO_ defines are for the CURLOPT_*PROTOCOLS options */ #define CURLPROTO_HTTP (1<<0) #define CURLPROTO_HTTPS (1<<1) @@ -958,17 +1031,27 @@ typedef enum { #define CURLOPT(na,t,nu) na = t + nu -/* handy aliases that make no run-time difference */ -#define CURLOPTTYPE_STRINGPOINT CURLOPTTYPE_OBJECTPOINT +/* CURLOPT aliases that make no run-time difference */ + +/* 'char *' argument to a string with a trailing zero */ +#define CURLOPTTYPE_STRINGPOINT CURLOPTTYPE_OBJECTPOINT + +/* 'struct curl_slist *' argument */ #define CURLOPTTYPE_SLISTPOINT CURLOPTTYPE_OBJECTPOINT +/* 'void *' argument passed untouched to callback */ +#define CURLOPTTYPE_CBPOINT CURLOPTTYPE_OBJECTPOINT + +/* 'long' argument with a set of values/bitmask */ +#define CURLOPTTYPE_VALUES CURLOPTTYPE_LONG + /* * All CURLOPT_* values. */ typedef enum { /* This is the FILE * or void * the regular output should be written to. */ - CURLOPT(CURLOPT_WRITEDATA, CURLOPTTYPE_OBJECTPOINT, 1), + CURLOPT(CURLOPT_WRITEDATA, CURLOPTTYPE_CBPOINT, 1), /* The full URL to get/put */ CURLOPT(CURLOPT_URL, CURLOPTTYPE_STRINGPOINT, 2), @@ -991,7 +1074,7 @@ typedef enum { /* not used */ /* Specified file stream to upload from (use as input): */ - CURLOPT(CURLOPT_READDATA, CURLOPTTYPE_OBJECTPOINT, 9), + CURLOPT(CURLOPT_READDATA, CURLOPTTYPE_CBPOINT, 9), /* Buffer to receive error messages in, must be at least CURL_ERROR_SIZE * bytes big. */ @@ -1076,7 +1159,7 @@ typedef enum { /* send FILE * or void * to store headers to, if you use a callback it is simply passed to the callback unmodified */ - CURLOPT(CURLOPT_HEADERDATA, CURLOPTTYPE_OBJECTPOINT, 29), + CURLOPT(CURLOPT_HEADERDATA, CURLOPTTYPE_CBPOINT, 29), /* point to a file to read the initial cookies from, also enables "cookie awareness" */ @@ -1084,10 +1167,10 @@ typedef enum { /* What version to specifically try to use. See CURL_SSLVERSION defines below. */ - CURLOPT(CURLOPT_SSLVERSION, CURLOPTTYPE_LONG, 32), + CURLOPT(CURLOPT_SSLVERSION, CURLOPTTYPE_VALUES, 32), /* What kind of HTTP time condition to use, see defines */ - CURLOPT(CURLOPT_TIMECONDITION, CURLOPTTYPE_LONG, 33), + CURLOPT(CURLOPT_TIMECONDITION, CURLOPTTYPE_VALUES, 33), /* Time to use with the above condition. Specified in number of seconds since 1 Jan 1970 */ @@ -1141,7 +1224,7 @@ typedef enum { /* Specify whether to read the user+password from the .netrc or the URL. * This must be one of the CURL_NETRC_* enums below. */ - CURLOPT(CURLOPT_NETRC, CURLOPTTYPE_LONG, 51), + CURLOPT(CURLOPT_NETRC, CURLOPTTYPE_VALUES, 51), /* use Location: Luke! */ CURLOPT(CURLOPT_FOLLOWLOCATION, CURLOPTTYPE_LONG, 52), @@ -1162,8 +1245,8 @@ typedef enum { /* Data passed to the CURLOPT_PROGRESSFUNCTION and CURLOPT_XFERINFOFUNCTION callbacks */ - CURLOPT(CURLOPT_PROGRESSDATA, CURLOPTTYPE_OBJECTPOINT, 57), -#define CURLOPT_XFERINFODATA CURLOPT_PROGRESSDATA + CURLOPT(CURLOPT_XFERINFODATA, CURLOPTTYPE_CBPOINT, 57), +#define CURLOPT_PROGRESSDATA CURLOPT_XFERINFODATA /* We want the referrer field set automatically when following locations */ CURLOPT(CURLOPT_AUTOREFERER, CURLOPTTYPE_LONG, 58), @@ -1258,7 +1341,7 @@ typedef enum { /* Specify which HTTP version to use! This must be set to one of the CURL_HTTP_VERSION* enums set below. */ - CURLOPT(CURLOPT_HTTP_VERSION, CURLOPTTYPE_LONG, 84), + CURLOPT(CURLOPT_HTTP_VERSION, CURLOPTTYPE_VALUES, 84), /* Specifically switch on or off the FTP engine's use of the EPSV command. By default, that one will always be attempted before the more traditional @@ -1296,7 +1379,7 @@ typedef enum { CURLOPT(CURLOPT_DEBUGFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 94), /* set the data for the debug function */ - CURLOPT(CURLOPT_DEBUGDATA, CURLOPTTYPE_OBJECTPOINT, 95), + CURLOPT(CURLOPT_DEBUGDATA, CURLOPTTYPE_CBPOINT, 95), /* mark this as start of a cookie session */ CURLOPT(CURLOPT_COOKIESESSION, CURLOPTTYPE_LONG, 96), @@ -1319,7 +1402,7 @@ typedef enum { /* indicates type of proxy. accepted values are CURLPROXY_HTTP (default), CURLPROXY_HTTPS, CURLPROXY_SOCKS4, CURLPROXY_SOCKS4A and CURLPROXY_SOCKS5. */ - CURLOPT(CURLOPT_PROXYTYPE, CURLOPTTYPE_LONG, 101), + CURLOPT(CURLOPT_PROXYTYPE, CURLOPTTYPE_VALUES, 101), /* Set the Accept-Encoding string. Use this to tell a server you would like the response to be compressed. Before 7.21.6, this was known as @@ -1345,7 +1428,7 @@ typedef enum { /* Set this to a bitmask value to enable the particular authentications methods you like. Use this in combination with CURLOPT_USERPWD. Note that setting multiple bits may cause extra network round-trips. */ - CURLOPT(CURLOPT_HTTPAUTH, CURLOPTTYPE_LONG, 107), + CURLOPT(CURLOPT_HTTPAUTH, CURLOPTTYPE_VALUES, 107), /* Set the ssl context callback function, currently only for OpenSSL or WolfSSL ssl_ctx, or mbedTLS mbedtls_ssl_config in the second argument. @@ -1354,7 +1437,7 @@ typedef enum { /* Set the userdata for the ssl context callback function's third argument */ - CURLOPT(CURLOPT_SSL_CTX_DATA, CURLOPTTYPE_OBJECTPOINT, 109), + CURLOPT(CURLOPT_SSL_CTX_DATA, CURLOPTTYPE_CBPOINT, 109), /* FTP Option that causes missing dirs to be created on the remote server. In 7.19.4 we introduced the convenience enums for this option using the @@ -1365,7 +1448,7 @@ typedef enum { /* Set this to a bitmask value to enable the particular authentications methods you like. Use this in combination with CURLOPT_PROXYUSERPWD. Note that setting multiple bits may cause extra network round-trips. */ - CURLOPT(CURLOPT_PROXYAUTH, CURLOPTTYPE_LONG, 111), + CURLOPT(CURLOPT_PROXYAUTH, CURLOPTTYPE_VALUES, 111), /* FTP option that changes the timeout, in seconds, associated with getting a response. This is different from transfer timeout time and @@ -1377,7 +1460,7 @@ typedef enum { /* Set this option to one of the CURL_IPRESOLVE_* defines (see below) to tell libcurl to resolve names to those IP versions only. This only has affect on systems with support for more than one, i.e IPv4 _and_ IPv6. */ - CURLOPT(CURLOPT_IPRESOLVE, CURLOPTTYPE_LONG, 113), + CURLOPT(CURLOPT_IPRESOLVE, CURLOPTTYPE_VALUES, 113), /* Set this option to limit the size of a file that will be downloaded from an HTTP or FTP server. @@ -1412,7 +1495,7 @@ typedef enum { CURLUSESSL_CONTROL - SSL for the control connection or fail CURLUSESSL_ALL - SSL for all communication or fail */ - CURLOPT(CURLOPT_USE_SSL, CURLOPTTYPE_LONG, 119), + CURLOPT(CURLOPT_USE_SSL, CURLOPTTYPE_VALUES, 119), /* The _LARGE version of the standard POSTFIELDSIZE option */ CURLOPT(CURLOPT_POSTFIELDSIZE_LARGE, CURLOPTTYPE_OFF_T, 120), @@ -1438,10 +1521,10 @@ typedef enum { CURLFTPAUTH_SSL - try "AUTH SSL" first, then TLS CURLFTPAUTH_TLS - try "AUTH TLS" first, then SSL */ - CURLOPT(CURLOPT_FTPSSLAUTH, CURLOPTTYPE_LONG, 129), + CURLOPT(CURLOPT_FTPSSLAUTH, CURLOPTTYPE_VALUES, 129), CURLOPT(CURLOPT_IOCTLFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 130), - CURLOPT(CURLOPT_IOCTLDATA, CURLOPTTYPE_OBJECTPOINT, 131), + CURLOPT(CURLOPT_IOCTLDATA, CURLOPTTYPE_CBPOINT, 131), /* 132 OBSOLETE. Gone in 7.16.0 */ /* 133 OBSOLETE. Gone in 7.16.0 */ @@ -1464,7 +1547,7 @@ typedef enum { /* Select "file method" to use when doing FTP, see the curl_ftpmethod above. */ - CURLOPT(CURLOPT_FTP_FILEMETHOD, CURLOPTTYPE_LONG, 138), + CURLOPT(CURLOPT_FTP_FILEMETHOD, CURLOPTTYPE_VALUES, 138), /* Local port number to bind the socket to */ CURLOPT(CURLOPT_LOCALPORT, CURLOPTTYPE_LONG, 139), @@ -1501,14 +1584,14 @@ typedef enum { /* callback function for setting socket options */ CURLOPT(CURLOPT_SOCKOPTFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 148), - CURLOPT(CURLOPT_SOCKOPTDATA, CURLOPTTYPE_OBJECTPOINT, 149), + CURLOPT(CURLOPT_SOCKOPTDATA, CURLOPTTYPE_CBPOINT, 149), /* set to 0 to disable session ID re-use for this transfer, default is enabled (== 1) */ CURLOPT(CURLOPT_SSL_SESSIONID_CACHE, CURLOPTTYPE_LONG, 150), /* allowed SSH authentication methods */ - CURLOPT(CURLOPT_SSH_AUTH_TYPES, CURLOPTTYPE_LONG, 151), + CURLOPT(CURLOPT_SSH_AUTH_TYPES, CURLOPTTYPE_VALUES, 151), /* Used by scp/sftp to do public/private key authentication */ CURLOPT(CURLOPT_SSH_PUBLIC_KEYFILE, CURLOPTTYPE_STRINGPOINT, 152), @@ -1533,7 +1616,7 @@ typedef enum { /* Set the behaviour of POST when redirecting. Values must be set to one of CURL_REDIR* defines below. This used to be called CURLOPT_POST301 */ - CURLOPT(CURLOPT_POSTREDIR, CURLOPTTYPE_LONG, 161), + CURLOPT(CURLOPT_POSTREDIR, CURLOPTTYPE_VALUES, 161), /* used by scp/sftp to verify the host's public key */ CURLOPT(CURLOPT_SSH_HOST_PUBLIC_KEY_MD5, CURLOPTTYPE_STRINGPOINT, 162), @@ -1543,7 +1626,7 @@ typedef enum { CURL_SOCKET_BAD. The callback should have type curl_opensocket_callback */ CURLOPT(CURLOPT_OPENSOCKETFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 163), - CURLOPT(CURLOPT_OPENSOCKETDATA, CURLOPTTYPE_OBJECTPOINT, 164), + CURLOPT(CURLOPT_OPENSOCKETDATA, CURLOPTTYPE_CBPOINT, 164), /* POST volatile input fields. */ CURLOPT(CURLOPT_COPYPOSTFIELDS, CURLOPTTYPE_OBJECTPOINT, 165), @@ -1553,7 +1636,7 @@ typedef enum { /* Callback function for seeking in the input stream */ CURLOPT(CURLOPT_SEEKFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 167), - CURLOPT(CURLOPT_SEEKDATA, CURLOPTTYPE_OBJECTPOINT, 168), + CURLOPT(CURLOPT_SEEKDATA, CURLOPTTYPE_CBPOINT, 168), /* CRL file */ CURLOPT(CURLOPT_CRLFILE, CURLOPTTYPE_STRINGPOINT, 169), @@ -1614,7 +1697,7 @@ typedef enum { CURLOPT(CURLOPT_SSH_KEYFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 184), /* set the SSH host key callback custom pointer */ - CURLOPT(CURLOPT_SSH_KEYDATA, CURLOPTTYPE_OBJECTPOINT, 185), + CURLOPT(CURLOPT_SSH_KEYDATA, CURLOPTTYPE_CBPOINT, 185), /* set the SMTP mail originator */ CURLOPT(CURLOPT_MAIL_FROM, CURLOPTTYPE_STRINGPOINT, 186), @@ -1626,7 +1709,7 @@ typedef enum { CURLOPT(CURLOPT_FTP_USE_PRET, CURLOPTTYPE_LONG, 188), /* RTSP request method (OPTIONS, SETUP, PLAY, etc...) */ - CURLOPT(CURLOPT_RTSP_REQUEST, CURLOPTTYPE_LONG, 189), + CURLOPT(CURLOPT_RTSP_REQUEST, CURLOPTTYPE_VALUES, 189), /* The RTSP session identifier */ CURLOPT(CURLOPT_RTSP_SESSION_ID, CURLOPTTYPE_STRINGPOINT, 190), @@ -1644,7 +1727,7 @@ typedef enum { CURLOPT(CURLOPT_RTSP_SERVER_CSEQ, CURLOPTTYPE_LONG, 194), /* The stream to pass to INTERLEAVEFUNCTION. */ - CURLOPT(CURLOPT_INTERLEAVEDATA, CURLOPTTYPE_OBJECTPOINT, 195), + CURLOPT(CURLOPT_INTERLEAVEDATA, CURLOPTTYPE_CBPOINT, 195), /* Let the application define a custom write method for RTP data */ CURLOPT(CURLOPT_INTERLEAVEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 196), @@ -1664,10 +1747,10 @@ typedef enum { CURLOPT(CURLOPT_FNMATCH_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 200), /* Let the application define custom chunk data pointer */ - CURLOPT(CURLOPT_CHUNK_DATA, CURLOPTTYPE_OBJECTPOINT, 201), + CURLOPT(CURLOPT_CHUNK_DATA, CURLOPTTYPE_CBPOINT, 201), /* FNMATCH_FUNCTION user pointer */ - CURLOPT(CURLOPT_FNMATCH_DATA, CURLOPTTYPE_OBJECTPOINT, 202), + CURLOPT(CURLOPT_FNMATCH_DATA, CURLOPTTYPE_CBPOINT, 202), /* send linked-list of name:port:address sets */ CURLOPT(CURLOPT_RESOLVE, CURLOPTTYPE_SLISTPOINT, 203), @@ -1696,10 +1779,10 @@ typedef enum { /* Callback function for closing socket (instead of close(2)). The callback should have type curl_closesocket_callback */ CURLOPT(CURLOPT_CLOSESOCKETFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 208), - CURLOPT(CURLOPT_CLOSESOCKETDATA, CURLOPTTYPE_OBJECTPOINT, 209), + CURLOPT(CURLOPT_CLOSESOCKETDATA, CURLOPTTYPE_CBPOINT, 209), /* allow GSSAPI credential delegation */ - CURLOPT(CURLOPT_GSSAPI_DELEGATION, CURLOPTTYPE_LONG, 210), + CURLOPT(CURLOPT_GSSAPI_DELEGATION, CURLOPTTYPE_VALUES, 210), /* Set the name servers to use for DNS resolution */ CURLOPT(CURLOPT_DNS_SERVERS, CURLOPTTYPE_STRINGPOINT, 211), @@ -1716,7 +1799,7 @@ typedef enum { CURLOPT(CURLOPT_TCP_KEEPINTVL, CURLOPTTYPE_LONG, 215), /* Enable/disable specific SSL features with a bitmask, see CURLSSLOPT_* */ - CURLOPT(CURLOPT_SSL_OPTIONS, CURLOPTTYPE_LONG, 216), + CURLOPT(CURLOPT_SSL_OPTIONS, CURLOPTTYPE_VALUES, 216), /* Set the SMTP auth originator */ CURLOPT(CURLOPT_MAIL_AUTH, CURLOPTTYPE_STRINGPOINT, 217), @@ -1763,7 +1846,7 @@ typedef enum { CURLOPT(CURLOPT_PROXYHEADER, CURLOPTTYPE_SLISTPOINT, 228), /* Pass in a bitmask of "header options" */ - CURLOPT(CURLOPT_HEADEROPT, CURLOPTTYPE_LONG, 229), + CURLOPT(CURLOPT_HEADEROPT, CURLOPTTYPE_VALUES, 229), /* The public key in DER form used to validate the peer public key this option is used only if SSL_VERIFYPEER is true */ @@ -1835,7 +1918,7 @@ typedef enum { /* What version to specifically try to use for proxy. See CURL_SSLVERSION defines below. */ - CURLOPT(CURLOPT_PROXY_SSLVERSION, CURLOPTTYPE_LONG, 250), + CURLOPT(CURLOPT_PROXY_SSLVERSION, CURLOPTTYPE_VALUES, 250), /* Set a username for authenticated TLS for proxy */ CURLOPT(CURLOPT_PROXY_TLSAUTH_USERNAME, CURLOPTTYPE_STRINGPOINT, 251), @@ -1909,7 +1992,7 @@ typedef enum { CURLOPT(CURLOPT_RESOLVER_START_FUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 272), /* User data to pass to the resolver start callback. */ - CURLOPT(CURLOPT_RESOLVER_START_DATA, CURLOPTTYPE_OBJECTPOINT, 273), + CURLOPT(CURLOPT_RESOLVER_START_DATA, CURLOPTTYPE_CBPOINT, 273), /* send HAProxy PROXY protocol header? */ CURLOPT(CURLOPT_HAPROXYPROTOCOL, CURLOPTTYPE_LONG, 274), @@ -1940,7 +2023,7 @@ typedef enum { CURLOPT(CURLOPT_TRAILERFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 283), /* pointer to be passed to HTTP_TRAILER_FUNCTION */ - CURLOPT(CURLOPT_TRAILERDATA, CURLOPTTYPE_OBJECTPOINT, 284), + CURLOPT(CURLOPT_TRAILERDATA, CURLOPTTYPE_CBPOINT, 284), /* set this to 1L to allow HTTP/0.9 responses or 0L to disallow */ CURLOPT(CURLOPT_HTTP09_ALLOWED, CURLOPTTYPE_LONG, 285), @@ -1971,6 +2054,25 @@ typedef enum { CURLOPT(CURLOPT_PROXY_ISSUERCERT, CURLOPTTYPE_STRINGPOINT, 296), CURLOPT(CURLOPT_PROXY_ISSUERCERT_BLOB, CURLOPTTYPE_BLOB, 297), + /* the EC curves requested by the TLS client (RFC 8422, 5.1); + * OpenSSL support via 'set_groups'/'set_curves': + * https://www.openssl.org/docs/manmaster/man3/SSL_CTX_set1_groups.html + */ + CURLOPT(CURLOPT_SSL_EC_CURVES, CURLOPTTYPE_STRINGPOINT, 298), + + /* HSTS bitmask */ + CURLOPT(CURLOPT_HSTS_CTRL, CURLOPTTYPE_LONG, 299), + /* HSTS file name */ + CURLOPT(CURLOPT_HSTS, CURLOPTTYPE_STRINGPOINT, 300), + + /* HSTS read callback */ + CURLOPT(CURLOPT_HSTSREADFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 301), + CURLOPT(CURLOPT_HSTSREADDATA, CURLOPTTYPE_CBPOINT, 302), + + /* HSTS write callback */ + CURLOPT(CURLOPT_HSTSWRITEFUNCTION, CURLOPTTYPE_FUNCTIONPOINT, 303), + CURLOPT(CURLOPT_HSTSWRITEDATA, CURLOPTTYPE_CBPOINT, 304), + CURLOPT_LASTENTRY /* the last unused */ } CURLoption; @@ -2643,8 +2745,9 @@ typedef enum { CURLINFO_APPCONNECT_TIME_T = CURLINFO_OFF_T + 56, CURLINFO_RETRY_AFTER = CURLINFO_OFF_T + 57, CURLINFO_EFFECTIVE_METHOD = CURLINFO_STRING + 58, + CURLINFO_PROXY_ERROR = CURLINFO_LONG + 59, - CURLINFO_LASTONE = 58 + CURLINFO_LASTONE = 59 } CURLINFO; /* CURLINFO_RESPONSE_CODE is the new name for the option previously known as @@ -2841,6 +2944,7 @@ typedef struct curl_version_info_data curl_version_info_data; #define CURL_VERSION_HTTP3 (1<<25) /* HTTP3 support built-in */ #define CURL_VERSION_ZSTD (1<<26) /* zstd features are present */ #define CURL_VERSION_UNICODE (1<<27) /* Unicode support on Windows */ +#define CURL_VERSION_HSTS (1<<28) /* HSTS is supported */ /* * NAME curl_version_info() @@ -2903,6 +3007,7 @@ CURL_EXTERN CURLcode curl_easy_pause(CURL *handle, int bitmask); #include "easy.h" /* nothing in curl is fun without the easy stuff */ #include "multi.h" #include "urlapi.h" +#include "options.h" /* the typechecker doesn't work in C++ (yet) */ #if defined(__GNUC__) && defined(__GNUC_MINOR__) && \ |