Release-1.4.1-20050129

9 files changed, 200 insertions, 127 deletions

diff --git a/doc/arch.doc b/doc/arch.doc
index d4da06f..ca0417c 100644
--- a/doc/arch.doc
+++ b/doc/arch.doc
@@ -216,10 +216,10 @@ if (open(F,"<Makefile.libdoxygen.old")) {
   }
   print "Processing Makefile.libdoxygen...\n";
   while (<F>) {
-    if ( s/\(LEX\) -P([a-z]+)YY -t $file/(LEX) -d -P\1YY -t $file/g ) {
+    if ( s/\(LEX\) -P([a-zA-Z]+)YY -t $file/(LEX) -d -P\1YY -t $file/g ) {
       print "Enabling debug info for $file\n";
     }
-    elsif ( s/\(LEX\) -d -P([a-z]+)YY -t $file/(LEX) -P\1YY -t $file/g ) {
+    elsif ( s/\(LEX\) -d -P([a-zA-Z]+)YY -t $file/(LEX) -P\1YY -t $file/g ) {
       print "Disabling debug info for $file\n";
     }
     print G "$_";
diff --git a/doc/commands.doc b/doc/commands.doc
index cd90f81..4966df5 100644
--- a/doc/commands.doc
+++ b/doc/commands.doc
@@ -171,7 +171,7 @@ doxygen. Unrecognized commands are treated as normal text.
     Structural indicators
     \htmlonly --- </center>\endhtmlonly</h2>
 
-\section cmdaddtogroup \addtogroup <name> [(title)]
+\section cmdaddtogroup \\addtogroup <name> [(title)]
   \addindex \\addtogroup
   Defines a group just like \ref cmddefgroup "\\defgroup", but in contrast to
   that command using the same \<name\> more than once will not result in a warning,
@@ -205,7 +205,7 @@ doxygen. Unrecognized commands are treated as normal text.
   \sa page \ref grouping "Grouping", sections \ref cmddefgroup "\\defgroup", \ref cmdingroup "\\ingroup" and
   \ref cmdweakgroup "\\weakgroup".
 
-\section cmdcallgraph \callgraph 
+\section cmdcallgraph \\callgraph 
 
   \addindex \\callgraph
   When this command is put in a comment block of a function or method
@@ -217,7 +217,7 @@ doxygen. Unrecognized commands are treated as normal text.
   doxygen code parser which is not perfect.
 
 <hr>
-\section cmdcategory \category <name> [<header-file>] [<header-name>]
+\section cmdcategory \\category <name> [<header-file>] [<header-name>]
 
   \addindex \\category
   For Objective-C only: Indicates that a comment block contains documentation 
@@ -227,7 +227,7 @@ doxygen. Unrecognized commands are treated as normal text.
   \sa section \ref cmdclass "\\class".
 
 <hr>
-\section cmdclass \class <name> [<header-file>] [<header-name>]
+\section cmdclass \\class <name> [<header-file>] [<header-name>]
 
   \addindex \\class
   Indicates that a comment block contains documentation for a
@@ -250,7 +250,7 @@ doxygen. Unrecognized commands are treated as normal text.
   \endhtmlonly
 
 <hr>
-\section cmddef \def <name>
+\section cmddef \\def <name>
 
   \addindex \\def
   Indicates that a comment block contains documentation for a 
@@ -264,7 +264,7 @@ doxygen. Unrecognized commands are treated as normal text.
   \endhtmlonly
 
 <hr>
-\section cmddefgroup \defgroup <name> (group title)
+\section cmddefgroup \\defgroup <name> (group title)
 
   \addindex \\defgroup
   Indicates that a comment block contains documentation for a
@@ -279,7 +279,7 @@ doxygen. Unrecognized commands are treated as normal text.
   \ref cmdweakgroup "\\weakgroup".
 
 <hr>
-\section cmddir \dir [<path fragment>]
+\section cmddir \\dir [<path fragment>]
   
   \addindex \\dir
   Indicates that a comment block contains documentation for a directory.
@@ -292,7 +292,7 @@ doxygen. Unrecognized commands are treated as normal text.
 
 <hr>
 
-\section cmdenum \enum <name>
+\section cmdenum \\enum <name>
 
   \addindex \\enum
   Indicates that a comment block contains documentation for an 
@@ -314,7 +314,7 @@ doxygen. Unrecognized commands are treated as normal text.
   \endhtmlonly
 
 <hr>
-\section cmdexample \example <file-name>
+\section cmdexample \\example <file-name>
   
   \addindex \\example
   Indicates that a comment block contains documentation for a source code 
@@ -347,7 +347,7 @@ doxygen. Unrecognized commands are treated as normal text.
   \sa section \ref cmdinclude "\\include".
 
 <hr>
-\section cmdfile \file [<name>]
+\section cmdfile \\file [<name>]
   
   \addindex \\file
   Indicates that a comment block contains documentation for a source or 
@@ -371,7 +371,7 @@ doxygen. Unrecognized commands are treated as normal text.
   has been set to YES in the configuration file.
 
 <hr>
-\section cmdfn \fn (function declaration)
+\section cmdfn \\fn (function declaration)
  
   \addindex \\fn
   Indicates that a comment block contains documentation for a function
@@ -402,7 +402,7 @@ doxygen. Unrecognized commands are treated as normal text.
   \sa section \ref cmdvar "\\var" and \ref cmdtypedef "\\typedef".
 
 <hr>
-\section cmdhideinitializer \hideinitializer
+\section cmdhideinitializer \\hideinitializer
 
   \addindex \\hideinitializer
   By default the value of a define and the initializer of a variable
@@ -413,7 +413,7 @@ doxygen. Unrecognized commands are treated as normal text.
   \sa section \ref cmdshowinitializer "\\showinitializer".
 
 <hr>
-\section cmdingroup \ingroup (<groupname> [<groupname> <groupname>])
+\section cmdingroup \\ingroup (<groupname> [<groupname> <groupname>])
 
   \addindex \\ingroup
   If the \\ingroup command is placed in a comment block of a
@@ -424,7 +424,7 @@ doxygen. Unrecognized commands are treated as normal text.
   \ref cmdaddtogroup "\\addtogroup" and \ref cmdweakgroup "\\weakgroup"
 
 <hr>
-\section cmdinterface \interface <name> [<header-file>] [<header-name>]
+\section cmdinterface \\interface <name> [<header-file>] [<header-name>]
 
   \addindex \\interface
   Indicates that a comment block contains documentation for an
@@ -434,7 +434,7 @@ doxygen. Unrecognized commands are treated as normal text.
   \sa section \ref cmdclass "\\class".
 
 <hr>
-\section cmdinternal \internal
+\section cmdinternal \\internal
   
   \addindex \\internal
   This command writes the message `For internal use only' to the output and
@@ -451,7 +451,7 @@ doxygen. Unrecognized commands are treated as normal text.
   to show or hide the internal documentation.
 
 <hr>
-\section cmdmainpage \mainpage [(title)]
+\section cmdmainpage \\mainpage [(title)]
 
   \addindex \\mainpage
 
@@ -487,7 +487,7 @@ doxygen. Unrecognized commands are treated as normal text.
      section \ref cmdpage "\\page".
 
 <hr>
-\section cmdname \name (header)  
+\section cmdname \\name (header)  
 
 This command turns a comment block into a header
 definition of a member group. The
@@ -498,14 +498,14 @@ members of the group.
 See section \ref memgroup for an example.
 
 <hr>
-\section cmdnamespace \namespace <name> 
+\section cmdnamespace \\namespace <name> 
 
   \addindex \\namespace
   Indicates that a comment block contains documentation for a
   namespace with name \<name\>. 
   
 <hr>
-\section cmdnosubgrouping \nosubgrouping
+\section cmdnosubgrouping \\nosubgrouping
 
   \addindex \\nosubgrouping
   This command can be put in the documentation
@@ -514,7 +514,7 @@ See section \ref memgroup for an example.
   Public/Protected/Private/... section.
 
 <hr>
-\section cmdoverload \overload [(function declaration)]
+\section cmdoverload \\overload [(function declaration)]
 
   \addindex \\overload
   This command can be used to generate the following 
@@ -545,14 +545,14 @@ See section \ref memgroup for an example.
   \endhtmlonly
 
 <hr>
-\section cmdpackage \package <name>
+\section cmdpackage \\package <name>
   
   \addindex \\package
   Indicates that a comment block contains documentation for a
   Java package with name \<name\>. 
 
 <hr>
-\section cmdpage \page <name> (title)
+\section cmdpage \\page <name> (title)
 
   \addindex \\page
   Indicates that a comment block contains a piece of documentation that is
@@ -582,7 +582,7 @@ See section \ref memgroup for an example.
               \ref cmdref "\\ref".
 
 <hr>
-\section cmdproperty \property (qualified property name)
+\section cmdproperty \\property (qualified property name)
 
   \addindex \\property
   Indicates that a comment block contains documentation for a
@@ -592,7 +592,7 @@ See section \ref memgroup for an example.
   \sa section \ref cmdfn "\\fn" and \ref cmdvar "\\var".
 
 <hr>
-\section cmdprotocol \protocol <name> [<header-file>] [<header-name>]
+\section cmdprotocol \\protocol <name> [<header-file>] [<header-name>]
 
   \addindex \\protocol
   Indicates that a comment block contains documentation for a
@@ -602,7 +602,7 @@ See section \ref memgroup for an example.
   \sa section \ref cmdclass "\\class".
 
 <hr>
-\section cmdrelates \relates <name>
+\section cmdrelates \\relates <name>
 
   \addindex \\relates
   This command can be used in the documentation of a non-member function
@@ -620,7 +620,7 @@ See section \ref memgroup for an example.
   \endhtmlonly
 
 <hr>
-\section cmdrelatesalso \relatesalso <name>
+\section cmdrelatesalso \\relatesalso <name>
 
   \addindex \\relatesalso
   This command can be used in the documentation of a non-member function
@@ -631,7 +631,7 @@ See section \ref memgroup for an example.
   class. It only works for functions.  
 
 <hr>
-\section cmdshowinitializer \showinitializer
+\section cmdshowinitializer \\showinitializer
 
   \addindex \\showinitializer
   By default the value of a define and the initializer of a variable
@@ -642,7 +642,7 @@ See section \ref memgroup for an example.
   \sa section \ref cmdhideinitializer "\\hideinitializer".
 
 <hr>
-\section cmdstruct \struct <name> [<header-file>] [<header-name>]
+\section cmdstruct \\struct <name> [<header-file>] [<header-name>]
 
   \addindex \\struct
   Indicates that a comment block contains documentation for a
@@ -652,7 +652,7 @@ See section \ref memgroup for an example.
   \sa section \ref cmdclass "\\class".
 
 <hr>
-\section cmdtypedef \typedef (typedef declaration)
+\section cmdtypedef \\typedef (typedef declaration)
 
   \addindex \\typedef
   Indicates that a comment block contains documentation for a
@@ -662,7 +662,7 @@ See section \ref memgroup for an example.
   \sa section \ref cmdfn "\\fn" and \ref cmdvar "\\var".
 
 <hr>
-\section cmdunion \union <name> [<header-file>] [<header-name>]
+\section cmdunion \\union <name> [<header-file>] [<header-name>]
 
   \addindex \\union
   Indicates that a comment block contains documentation for a
@@ -672,7 +672,7 @@ See section \ref memgroup for an example.
   \sa section \ref cmdclass "\\class".
 
 <hr>
-\section cmdvar \var (variable declaration)
+\section cmdvar \\var (variable declaration)
 
   \addindex \\var
   Indicates that a comment block contains documentation for a variable or
@@ -682,7 +682,7 @@ See section \ref memgroup for an example.
   \sa section \ref cmdfn "\\fn" and \ref cmdtypedef "\\typedef".
 
 <hr>
-\section cmdweakgroup \weakgroup <name> [(title)]
+\section cmdweakgroup \\weakgroup <name> [(title)]
   \addindex \\addtogroup
   Can be used exactly like \ref cmdaddtogroup "\\addtogroup", but has
   a lower priority when it comes to resolving conflicting grouping
@@ -697,7 +697,7 @@ See section \ref memgroup for an example.
     \htmlonly --- </center>\endhtmlonly</h2>
 
 <hr>
-\section cmdattention \attention { attention text }
+\section cmdattention \\attention { attention text }
 
   \addindex \\attention
   Starts a paragraph where a message that needs attention may be entered. 
@@ -708,7 +708,7 @@ See section \ref memgroup for an example.
   The \\attention command ends when a blank line or some other 
   sectioning command is encountered. 
 
-\section cmdauthor \author { list of authors }
+\section cmdauthor \\author { list of authors }
 
   \addindex \\author
   Starts a paragraph where one or more author names may be entered. 
@@ -728,7 +728,7 @@ See section \ref memgroup for an example.
   \endhtmlonly
 
 <hr>
-\section cmdbrief \brief {brief description}
+\section cmdbrief \\brief {brief description}
 
   \addindex \\brief
   Starts a paragraph that serves as a brief description. For classes and files
@@ -744,7 +744,7 @@ See section \ref memgroup for an example.
   Synonymous to \\short.
  
 <hr>
-\section cmdbug \bug { bug description }
+\section cmdbug \\bug { bug description }
 
   \addindex \\bug
   Starts a paragraph where one or more bugs may be reported. 
@@ -759,7 +759,7 @@ See section \ref memgroup for an example.
   for an example.
 
 <hr>
-\section cmdcond \cond [<section-label>]
+\section cmdcond \\cond [<section-label>]
 
   \addindex \\cond
   Starts a conditional section that ends with a corresponding 
@@ -825,7 +825,7 @@ The output will be different depending on whether \c ENABLED_SECTIONS
 is empty, \c TEST, \c DEV, or \c DEV \c TEST.
 
 <hr>
-\section cmddate \date { date description }
+\section cmddate \\date { date description }
 
   \addindex \\date
   Starts a paragraph where one or more dates may be entered. 
@@ -840,7 +840,7 @@ is empty, \c TEST, \c DEV, or \c DEV \c TEST.
   for an example.
 
 <hr>
-\section cmddeprecated \deprecated { description }
+\section cmddeprecated \\deprecated { description }
 
   \addindex \\deprecated
   Starts a paragraph indicating that this documentation block belongs to
@@ -848,7 +848,7 @@ is empty, \c TEST, \c DEV, or \c DEV \c TEST.
   expected life span, etc.
 
 <hr>
-\section cmdelse \else 
+\section cmdelse \\else 
 
   \addindex \\else
   Starts a conditional section if the previous conditional section 
@@ -859,7 +859,7 @@ is empty, \c TEST, \c DEV, or \c DEV \c TEST.
       \ref cmdendif "\\endif."
 
 <hr>
-\section cmdelseif \elseif <section-label>
+\section cmdelseif \\elseif <section-label>
 
   \addindex \\elseif
   Starts a conditional documentation section if the previous section 
@@ -874,7 +874,7 @@ is empty, \c TEST, \c DEV, or \c DEV \c TEST.
               \ref cmdelse "\\else", and \ref cmdelseif "\\elseif".
 
 <hr>
-\section cmdendcond \endcond
+\section cmdendcond \\endcond
 
   \addindex \\endcond
   Ends a conditional section that was started by \ref cmdcond "\\cond".
@@ -882,7 +882,7 @@ is empty, \c TEST, \c DEV, or \c DEV \c TEST.
   \sa \ref cmdcond "\\cond".
 
 <hr>
-\section cmdendif \endif 
+\section cmdendif \\endif 
 
   \addindex \\endif
   Ends a conditional section that was started by \c \\if or \c \\ifnot
@@ -891,7 +891,7 @@ is empty, \c TEST, \c DEV, or \c DEV \c TEST.
   \sa \ref cmdif "\\if", and \ref cmdifnot "\\ifnot".
 
 <hr>
-\section cmdexception \exception <exception-object> { exception description }
+\section cmdexception \\exception <exception-object> { exception description }
 
   \addindex \\exception
   Starts an exception description for an exception object with name 
@@ -909,7 +909,7 @@ is empty, \c TEST, \c DEV, or \c DEV \c TEST.
   the tag \\exceptions is a synonym for this tag.
 
 <hr>
-\section cmdif \if <section-label>
+\section cmdif \\if <section-label>
 
   \addindex \\if
   Starts a conditional documentation section. The section ends 
@@ -967,7 +967,7 @@ ALIASES  = "english=\if english" \
               \ref cmdelse "\\else", and \ref cmdelseif "\\elseif".
 
 <hr>
-\section cmdifnot \ifnot <section-label>
+\section cmdifnot \\ifnot <section-label>
 
   \addindex \\ifnot
   Starts a conditional documentation section. The section ends 
@@ -981,7 +981,7 @@ ALIASES  = "english=\if english" \
               \ref cmdelse "\\else", and \ref cmdelseif "\\elseif".
 
 <hr>
-\section cmdinvariant \invariant { description of invariant }
+\section cmdinvariant \\invariant { description of invariant }
 
   \addindex \\invariant
   Starts a paragraph where the invariant of an entity can be described.
@@ -995,7 +995,7 @@ ALIASES  = "english=\if english" \
   sectioning command is encountered.
 
 <hr>
-\section cmdnote \note { text }
+\section cmdnote \\note { text }
 
   \addindex \\note
   Starts a paragraph where a note can be entered. The paragraph will be 
@@ -1009,7 +1009,7 @@ ALIASES  = "english=\if english" \
   for an example.
 
 <hr>
-\section cmdpar \par [(paragraph title)] { paragraph }
+\section cmdpar \\par [(paragraph title)] { paragraph }
 
   \addindex \\par
   If a paragraph title is given this command starts a paragraph with a 
@@ -1033,7 +1033,7 @@ ALIASES  = "english=\if english" \
   \endhtmlonly
 
 <hr>
-\section cmdparam \param <parameter-name> { parameter description }
+\section cmdparam \\param <parameter-name> { parameter description }
 
   \addindex \\param
   Starts a parameter description for a function parameter with name 
@@ -1067,7 +1067,7 @@ void memcpy(void *dest, const void *src, size_t n);
   example.
 
 <hr>
-\section cmdpost \post { description of the postcondition }
+\section cmdpost \\post { description of the postcondition }
 
   \addindex \\post
   Starts a paragraph where the postcondition of an entity can be described.
@@ -1081,7 +1081,7 @@ void memcpy(void *dest, const void *src, size_t n);
   sectioning command is encountered.
 
 <hr>
-\section cmdpre \pre { description of the precondition }
+\section cmdpre \\pre { description of the precondition }
 
   \addindex \\pre
   Starts a paragraph where the precondition of an entity can be described.
@@ -1095,7 +1095,7 @@ void memcpy(void *dest, const void *src, size_t n);
   sectioning command is encountered.
   
 <hr>
-\section cmdremarks \remarks { remark text }
+\section cmdremarks \\remarks { remark text }
 
   \addindex \\remarks
   Starts a paragraph where one or more remarks may be entered. 
@@ -1109,7 +1109,7 @@ void memcpy(void *dest, const void *src, size_t n);
   sectioning command is encountered. 
 
 <hr>
-\section cmdreturn \return { description of the return value }
+\section cmdreturn \\return { description of the return value }
 
   \addindex \\return
   Starts a return value description for a function. 
@@ -1121,7 +1121,7 @@ void memcpy(void *dest, const void *src, size_t n);
   example.
   
 <hr>
-\section cmdretval \retval <return value> { description }
+\section cmdretval \\retval <return value> { description }
 
   \addindex \\retval
   Starts a return value description for a function with name 
@@ -1135,7 +1135,7 @@ void memcpy(void *dest, const void *src, size_t n);
   sectioning command is encountered. 
 
 <hr>
-\section cmdsa \sa { references }
+\section cmdsa \\sa { references }
 
   \addindex \\sa
   Starts a paragraph where one or more cross-references to classes, 
@@ -1152,13 +1152,13 @@ void memcpy(void *dest, const void *src, size_t n);
       to objects.
 
 <hr>
-\section cmdsee \see { references }
+\section cmdsee \\see { references }
 
   \addindex \\see
   Equivalent to \ref cmdsa "\\sa". Introduced for compatibility with Javadoc.
 
 <hr>
-\section cmdsince \since { text }
+\section cmdsince \\since { text }
 
   \addindex \\since
   This tag can be used to specify since when (version or time) an
@@ -1168,7 +1168,7 @@ void memcpy(void *dest, const void *src, size_t n);
   line or some other sectioning command is encountered. 
 
 <hr>
-\section cmdtest \test { paragraph describing a test case }
+\section cmdtest \\test { paragraph describing a test case }
 
   \addindex \\test
   Starts a paragraph where a test case can be described. 
@@ -1178,7 +1178,7 @@ void memcpy(void *dest, const void *src, size_t n);
   indicates the origin of the test case.
 
 <hr>
-\section cmdthrow \throw <exception-object> { exception description }
+\section cmdthrow \\throw <exception-object> { exception description }
 
   \addindex \\throw
   Synonymous to \\exception (see section \ref cmdexception "\\exception").
@@ -1187,7 +1187,7 @@ void memcpy(void *dest, const void *src, size_t n);
   the tag \\throws is a synonym for this tag.
 
 <hr>
-\section cmdtodo \todo { paragraph describing what is to be done }
+\section cmdtodo \\todo { paragraph describing what is to be done }
 
   \addindex \\todo
   Starts a paragraph where a TODO item is described. 
@@ -1197,7 +1197,7 @@ void memcpy(void *dest, const void *src, size_t n);
   indicates the origin of the item.
 
 <hr>
-\section cmdversion \version { version number }
+\section cmdversion \\version { version number }
 
   \addindex \\version
   Starts a paragraph where one or more version strings may be entered. 
@@ -1213,7 +1213,7 @@ void memcpy(void *dest, const void *src, size_t n);
   for an example.
  
 <hr>
-\section cmdwarning \warning { warning message }
+\section cmdwarning \\warning { warning message }
 
   \addindex \\warning
   Starts a paragraph where one or more warning messages may be entered. 
@@ -1227,7 +1227,7 @@ void memcpy(void *dest, const void *src, size_t n);
   sectioning command is encountered. See section \ref cmdauthor "\\author" 
   for an example.
 
-\section cmdxrefitem \xrefitem <key> "(heading)" "(list title)" {text}
+\section cmdxrefitem \\xrefitem <key> "(heading)" "(list title)" {text}
 
  \addindex \\xrefitem
  This command is a generalization of commands such as \ref cmdtodo "\\todo" 
@@ -1264,13 +1264,13 @@ void memcpy(void *dest, const void *src, size_t n);
     Commands to create links
     \htmlonly --- </center>\endhtmlonly</h2>
 
-\section cmdaddindex \addindex (text)
+\section cmdaddindex \\addindex (text)
 
   \addindex \\addindex
   This command adds (text) to the \f$\mbox{\LaTeX}\f$ index.
 
 <hr>
-\section cmdanchor \anchor <word>
+\section cmdanchor \\anchor <word>
 
   \addindex \\anchor
   This command places an invisible, named anchor into the documentation
@@ -1283,7 +1283,7 @@ void memcpy(void *dest, const void *src, size_t n);
   \sa section \ref cmdref "\\ref".
 
 <hr>
-\section cmdendlink \endlink
+\section cmdendlink \\endlink
 
   \addindex \\endlink 
   This command ends a link that is started with the \\link command.
@@ -1291,7 +1291,7 @@ void memcpy(void *dest, const void *src, size_t n);
   \sa section \ref cmdlink "\\link".
 
 <hr>
-\section cmdlink \link <link-object> 
+\section cmdlink \\link <link-object> 
 
   \addindex \\link
   The links that are automatically generated by doxygen always have the
@@ -1307,7 +1307,7 @@ void memcpy(void *dest, const void *src, size_t n);
   generated links and valid link-objects.
 
 <hr>
-\section cmdref \ref <name> ["(text)"]
+\section cmdref \\ref <name> ["(text)"]
 
   \addindex \\ref
   Creates a reference to a named section, subsection, page or anchor.
@@ -1323,7 +1323,7 @@ void memcpy(void *dest, const void *src, size_t n);
     Section \ref cmdpage "\\page" for an example of the \\ref command.
 
 <hr>
-\section cmdsection \section <section-name> (section title)
+\section cmdsection \\section <section-name> (section title)
   
   \addindex \\section
   Creates a section with name \<section-name\>. The title of the
@@ -1334,7 +1334,7 @@ void memcpy(void *dest, const void *src, size_t n);
            \e not in other documentation blocks!
 
 <hr>
-\section cmdsubsection \subsection <subsection-name> (subsection title)
+\section cmdsubsection \\subsection <subsection-name> (subsection title)
 
   \addindex \\subsection
   Creates a subsection with name \<subsection-name\>. The title of the
@@ -1350,7 +1350,7 @@ void memcpy(void *dest, const void *src, size_t n);
            \ref cmdsubsection "\\subsection" command.
 
 <hr>
-\section cmdsubsubsection \subsubsection <subsubsection-name> (subsubsection title)
+\section cmdsubsubsection \\subsubsection <subsubsection-name> (subsubsection title)
 
   \addindex \\subsubsection
   Creates a subsubsection with name \<subsubsection-name\>. The title of the
@@ -1366,7 +1366,7 @@ void memcpy(void *dest, const void *src, size_t n);
            \ref cmdsubsubsection "\\subsubsection" command.
 
 <hr>
-\section cmdparagraph \paragraph <paragraph-name> (paragraph title)
+\section cmdparagraph \\paragraph <paragraph-name> (paragraph title)
 
   \addindex \\paragraph
   Creates a named paragraph with name \<paragraph-name\>. The title of the
@@ -1387,7 +1387,7 @@ void memcpy(void *dest, const void *src, size_t n);
     Commands for displaying examples
     \htmlonly --- </center>\endhtmlonly</h2>
 
-\section cmddontinclude \dontinclude <file-name>
+\section cmddontinclude \\dontinclude <file-name>
 
   \addindex \\dontinclude
   This command can be used to parse a source file without actually 
@@ -1420,7 +1420,7 @@ void memcpy(void *dest, const void *src, size_t n);
                \ref cmdskipline "\\skipline", and \ref cmduntil "\\until".
 
 <hr>
-\section cmdinclude \include <file-name>
+\section cmdinclude \\include <file-name>
 
   \addindex \\include
   This command can be used to include a source file as a block of code.
@@ -1451,7 +1451,7 @@ void memcpy(void *dest, const void *src, size_t n);
   \sa section \ref cmdexample "\\example" and \ref cmddontinclude "\\dontinclude".
 
 <hr>
-\section cmdincludelineno \includelineno <file-name>
+\section cmdincludelineno \\includelineno <file-name>
 
   \addindex \\includelineno
   This command works the same way as \\include, but will add line 
@@ -1460,7 +1460,7 @@ void memcpy(void *dest, const void *src, size_t n);
   \sa section \ref cmdinclude "\\include".
 
 <hr>
-\section cmdline \line ( pattern )
+\section cmdline \\line ( pattern )
 
   \addindex \\line
   This command searches line by line through the example that was last
@@ -1476,7 +1476,7 @@ void memcpy(void *dest, const void *src, size_t n);
   See section \ref cmddontinclude "\\dontinclude" for an example.
 
 <hr>
-\section cmdskip \skip ( pattern )
+\section cmdskip \\skip ( pattern )
 
   \addindex \\skip
   This command searches line by line through the example that was last
@@ -1490,7 +1490,7 @@ void memcpy(void *dest, const void *src, size_t n);
   See section \ref cmddontinclude "\\dontinclude" for an example.
 
 <hr>
-\section cmdskipline \skipline ( pattern ) 
+\section cmdskipline \\skipline ( pattern ) 
 
   \addindex \\skipline
   This command searches line by line through the example that was last
@@ -1512,7 +1512,7 @@ void memcpy(void *dest, const void *src, size_t n);
   See section \ref cmddontinclude "\\dontinclude" for an example.
 
 <hr>
-\section cmduntil \until ( pattern )
+\section cmduntil \\until ( pattern )
 
   \addindex \\until
   This command writes all lines of the example that was last
@@ -1527,7 +1527,7 @@ void memcpy(void *dest, const void *src, size_t n);
   See section \ref cmddontinclude "\\dontinclude" for an example.
 
 <hr>
-\section cmdverbinclude \verbinclude <file-name>
+\section cmdverbinclude \\verbinclude <file-name>
 
   \addindex \\verbinclude
   This command includes the file \<file-name\> verbatim in the documentation.
@@ -1538,7 +1538,7 @@ void memcpy(void *dest, const void *src, size_t n);
   \ref cfg_example_path "EXAMPLE_PATH" tag of doxygen's configuration file.
 
 <hr>
-\section cmdhtmlinclude \htmlinclude <file-name>
+\section cmdhtmlinclude \\htmlinclude <file-name>
 
   \addindex \\htmlinclude
   This command includes the file \<file-name\> as is in the HTML documentation.
@@ -1553,7 +1553,7 @@ void memcpy(void *dest, const void *src, size_t n);
     Commands for visual enhancements
     \htmlonly --- </center>\endhtmlonly</h2>
 
-\section cmda \a <word>
+\section cmda \\a <word>
  
   \addindex \\a
   Displays the argument \<word\> using a special font.
@@ -1567,7 +1567,7 @@ void memcpy(void *dest, const void *src, size_t n);
   ... the \a x and \a y coordinates are used to ...
 
 <hr>
-\section cmdarg \arg { item-description }
+\section cmdarg \\arg { item-description }
   
   \addindex \\arg
   This command has one argument that continues until the first
@@ -1600,7 +1600,7 @@ void memcpy(void *dest, const void *src, size_t n);
 
 
 <hr>
-\section cmdb \b <word>
+\section cmdb \\b <word>
 
   \addindex \\b
   Displays the argument \<word\> using a bold font.
@@ -1608,7 +1608,7 @@ void memcpy(void *dest, const void *src, size_t n);
   To put multiple words in bold use \<b\>multiple words\</b\>.
   
 <hr>
-\section cmdc \c <word>
+\section cmdc \\c <word>
 
   \addindex \\c
   Displays the argument \<word\> using a typewriter font.
@@ -1627,7 +1627,7 @@ void memcpy(void *dest, const void *src, size_t n);
   To have multiple words in typewriter font use \<tt\>multiple words\</tt\>.
 
 <hr>
-\section cmdcode \code
+\section cmdcode \\code
 
   \addindex \\code
   Starts a block of code. A code block is treated differently
@@ -1638,7 +1638,7 @@ void memcpy(void *dest, const void *src, size_t n);
   \sa section \ref cmdendcode "\\endcode", section \ref cmdverbatim "\\verbatim"  
 
 <hr>
-\section cmdcopydoc \copydoc <link-object>
+\section cmdcopydoc \\copydoc <link-object>
 
   \addindex \\copydoc
   Copies a documentation block from the object specified by \<link-object\>
@@ -1676,7 +1676,7 @@ void memcpy(void *dest, const void *src, size_t n);
   relation will be broken and flagged as an error.
 
 <hr>
-\section cmddot \dot
+\section cmddot \\dot
 
   \addindex \\dot
   Starts a text fragment which should contain a valid description of a
@@ -1710,7 +1710,7 @@ class C {};
 \endcode
   
 <hr>
-\section cmddotfile \dotfile <file> ["caption"] 
+\section cmddotfile \\dotfile <file> ["caption"] 
 
   \addindex \\dotfile
   Inserts an image generated by dot from \<file\> into the documentation. 
@@ -1728,7 +1728,7 @@ class C {};
   stripped before the caption is displayed.
 
 <hr>
-\section cmde \e <word>
+\section cmde \\e <word>
 
   \addindex \\e 
   Displays the argument \<word\> in italics.
@@ -1746,7 +1746,7 @@ class C {};
   To emphasis multiple words use \<em\>multiple words\</em\>.
 
 <hr>
-\section cmdem \em <word>
+\section cmdem \\em <word>
 
   \addindex \\em 
   Displays the argument \<word\> in italics.
@@ -1763,20 +1763,20 @@ class C {};
   Equivalent to \ref cmde "\\e"
 
 <hr>
-\section cmdendcode \endcode
+\section cmdendcode \\endcode
 
   \addindex \\endcode
   Ends a block of code.
   \sa section \ref cmdcode "\\code"
  
 <hr>
-\section cmdenddot \enddot
+\section cmdenddot \\enddot
 
   \addindex \\enddot
   Ends a blocks that was started with \ref cmddot "\\dot".
 
 <hr>
-\section cmdendhtmlonly \endhtmlonly
+\section cmdendhtmlonly \\endhtmlonly
 
   \addindex \\endhtmlonly
   Ends a block of text that was started with a \\htmlonly command.
@@ -1784,7 +1784,7 @@ class C {};
   \sa section \ref cmdhtmlonly "\\htmlonly".
 
 <hr>
-\section cmdendlatexonly \endlatexonly
+\section cmdendlatexonly \\endlatexonly
 
   \addindex \\endlatexonly
   Ends a block of text that was started with a \\latexonly command.
@@ -1792,7 +1792,7 @@ class C {};
   \sa section \ref cmdlatexonly "\\latexonly".
 
 <hr>
-\section cmdendmanonly \endmanonly
+\section cmdendmanonly \\endmanonly
 
   \addindex \\endmanonly
   Ends a block of text that was started with a \\manonly command.
@@ -1800,7 +1800,7 @@ class C {};
   \sa section \ref cmdmanonly "\\manonly".
 
 <hr>
-\section cmdendverbatim \endverbatim
+\section cmdendverbatim \\endverbatim
 
   \addindex \\endverbatim
   Ends a block of text that was started with a \\verbatim command.
@@ -1808,7 +1808,7 @@ class C {};
   \sa section \ref cmdverbatim "\\verbatim".
 
 <hr>
-\section cmdendxmlonly \endxmlonly
+\section cmdendxmlonly \\endxmlonly
 
   \addindex \\endxmlonly
   Ends a block of text that was started with a \\xmlonly command.
@@ -1816,7 +1816,7 @@ class C {};
   \sa section \ref cmdxmlonly "\\xmlonly".
 
 <hr>
-\section cmdfdollar \f$
+\section cmdfdollar \\f$
 
   \addindex \\f\$
 
@@ -1824,7 +1824,7 @@ class C {};
   \sa section \ref formulas "formulas" for an example.
   
 <hr>
-\section cmdfbropen \f[
+\section cmdfbropen \\f[
 
   \addindex \\f[
 
@@ -1833,7 +1833,7 @@ class C {};
   \sa section \ref cmdfbrclose "\\f]" and section \ref formulas "formulas".
 
 <hr>
-\section cmdfbrclose \f]
+\section cmdfbrclose \\f]
 
   \addindex \\f]
   
@@ -1842,7 +1842,7 @@ class C {};
   \sa section \ref cmdfbropen "\\f[" and section \ref formulas "formulas".
 
 <hr>
-\section cmdhtmlonly \htmlonly
+\section cmdhtmlonly \\htmlonly
 
   \addindex \\htmlonly
   Starts a block of text that will be verbatim included in the
@@ -1862,7 +1862,7 @@ class C {};
               \ref cmdlatexonly "\\latexonly".
 
 <hr>
-\section cmdimage \image <format> <file> ["caption"] [<sizeindication>=<size>]
+\section cmdimage \\image <format> <file> ["caption"] [<sizeindication>=<size>]
 
   \addindex \\image
   Inserts an image into the documentation. This command is format
@@ -1917,7 +1917,7 @@ class C {};
            So \e you have to make sure this is the case!
 
 <hr>
-\section cmdlatexonly \latexonly
+\section cmdlatexonly \\latexonly
 
   \addindex \\latexonly
   Starts a block of text that will be verbatim included in the
@@ -1937,7 +1937,7 @@ class C {};
   and section \ref cmdhtmlonly "\\htmlonly".
 
 <hr>
-\section cmdmanonly \manonly
+\section cmdmanonly \\manonly
 
   \addindex \\manonly
   Starts a block of text that will be verbatim included in the
@@ -1953,7 +1953,7 @@ class C {};
               \ref cmdlatexonly "\\latexonly".
 
 <hr>
-\section cmdli \li { item-description }
+\section cmdli \\li { item-description }
   
   \addindex \\li
   This command has one argument that continues until the first
@@ -1985,14 +1985,14 @@ class C {};
   Equivalent to \ref cmdarg "\\arg"
 
 <hr>
-\section cmdn \n 
+\section cmdn \\n 
   
   \addindex \\n
   Forces a new line. Equivalent to \<br\> and inspired by
   the printf function.
 
 <hr>
-\section cmdp \p <word>
+\section cmdp \\p <word>
  
   \addindex \\p
   Displays the parameter \<word\> using a typewriter font.
@@ -2009,7 +2009,7 @@ class C {};
   Equivalent to \ref cmdc "\\c"
  
 <hr>
-\section cmdverbatim \verbatim
+\section cmdverbatim \\verbatim
 
   \addindex \\verbatim
   Starts a block of text that will be verbatim included in both the
@@ -2021,7 +2021,7 @@ class C {};
   \\verbatim command or the parser will get confused!
 
 <hr>
-\section cmdxmlonly \xmlonly
+\section cmdxmlonly \\xmlonly
 
   \addindex \\xmlonly
   Starts a block of text that will be verbatim included in the
@@ -2034,7 +2034,7 @@ class C {};
               \ref cmdlatexonly "\\latexonly".
 
 <hr>
-\section cmdbackslash \\
+\section cmdbackslash \\\\
 
   \addindex \\\\
   This command writes a backslash character (\\) to the HTML and 
@@ -2042,7 +2042,7 @@ class C {};
   cases because doxygen uses it to detect commands.
 
 <hr>
-\section cmdat \@
+\section cmdat \\\@
 
   \addindex \\\@
   This command writes an at-sign (\@) to the HTML and 
@@ -2050,7 +2050,7 @@ class C {};
   because doxygen uses it to detect JavaDoc commands.
 
 <hr>
-\section cmdtilde \~[LanguageId]
+\section cmdtilde \\~[LanguageId]
   \addindex \\~
   This command enables/disables a language specific filter. This can be
   used to put documentation for different language into one comment block
@@ -2067,14 +2067,14 @@ class C {};
    
 
 <hr>
-\section cmdamp \&
+\section cmdamp \\\&
 
   \addindex \\\&
   This command writes the \& character to output. 
   This character has to be escaped because it has a special meaning in HTML.
 
 <hr>
-\section cmddollar \$
+\section cmddollar \\\$
 
   \addindex \\\$
   This command writes the \$ character to the output. 
@@ -2082,7 +2082,7 @@ class C {};
   environment variables.
 
 <hr>
-\section cmdhash \#
+\section cmdhash \\\#
 
   \addindex \\\#
   This command writes the \# character to the output. This 
@@ -2090,20 +2090,20 @@ class C {};
   to documented entities. 
 
 <hr>
-\section cmdlt \<
+\section cmdlt \\\<
 
   \addindex \\\<
   This command writes the \< character to the output. 
   This character has to be escaped because it has a special meaning in HTML.
 
 <hr>
-\section cmdgt \>
+\section cmdgt \\\>
 
   \addindex \\\>
   This command writes the \> character to the output. This 
   character has to be escaped because it has a special meaning in HTML.
 
-\section cmdperc \%
+\section cmdperc \\\%
 
   \addindex \\\%
   This command writes the \% character to the output. This 
diff --git a/doc/doxygen.1 b/doc/doxygen.1
new file mode 100644
index 0000000..3736aaa
--- /dev/null
+++ b/doc/doxygen.1
@@ -0,0 +1,44 @@
+.TH DOXYGEN "1" "DATE" "doxygen VERSION" "User Commands"
+.SH NAME
+doxygen \- manual page for doxygen VERSION
+.SH DESCRIPTION
+Doxygen version VERSION
+Copyright Dimitri van Heesch 1997-2005
+.PP
+You can use doxygen in a number of ways:
+.TP
+1) Use doxygen to generate a template configuration file:
+.IP
+doxygen [-s] \fB\-g\fR [configName]
+.IP
+If - is used for configName doxygen will write to standard output.
+.TP 
+2) Use doxygen to update an old configuration file:
+.IP
+doxygen [-s] \fB\-u\fR [configName]
+.TP
+3) Use doxygen to generate documentation using an existing configuration file:
+.IP
+doxygen [configName]
+.IP
+If - is used for configName doxygen will read from standard input.
+.TP
+4) Use doxygen to generate a template style sheet file for RTF, HTML or Latex.
+.TP
+RTF:
+doxygen \fB\-w\fR rtf styleSheetFile
+.TP
+HTML:
+doxygen \fB\-w\fR html headerFile footerFile styleSheetFile [configFile]
+.TP
+LaTeX: doxygen \fB\-w\fR latex headerFile styleSheetFile [configFile]
+.TP
+5) Use doxygen to generate an rtf extensions file
+.TP
+RTF:
+doxygen \fB\-e\fR rtf extensionsFile
+.PP
+If \fB\-s\fR is specified the comments in the config file will be omitted.
+If configName is omitted `Doxyfile' will be used as a default.
+.SH SEE ALSO
+doxytag(1), doxywizard(1).
diff --git a/doc/doxytag.1 b/doc/doxytag.1
new file mode 100644
index 0000000..fcaa84b
--- /dev/null
+++ b/doc/doxytag.1
@@ -0,0 +1,20 @@
+.TH DOXYTAG "1" "DATE" "doxytag VERSION" "User Commands"
+.SH NAME
+doxytag \- generates a tag file and/or a search index for a set of HTML files
+.SH SYNOPSIS
+.B doxytag
+[\fI-t tag_file\fR] [\fI-s index_file\fR] [ \fIhtml_file \fR[\fIhtml_file\fR...] ]
+.SH DESCRIPTION
+Generates a tag file and/or a search index for a set of HTML files.  Use
+doxysearch as a CGI program to search the tag file generated by doxytag.
+.SH OPTIONS
+.TP
+\fB\-t\fR <tag_file>
+Generate tag file <tag_file>.
+.TP
+\fB\-s\fR <index_file> Generate search index <index_file>.
+.PP
+If no HTML files are given all files in the current dir that
+have a .html extension are parsed.
+.SH SEE ALSO
+doxygen(1), doxywizard(1).
diff --git a/doc/doxywizard.1 b/doc/doxywizard.1
new file mode 100644
index 0000000..4195cbb
--- /dev/null
+++ b/doc/doxywizard.1
@@ -0,0 +1,10 @@
+.TH DOXYWIZARD "1" "DATE" "doxywizard VERSION" "User Commands"
+.SH NAME
+doxywizard \- a tool to configure and run doxygen on your source files
+.SH SYNOPSIS
+.B doxywizard
+.SH DESCRIPTION
+Doxywizard is an interactive frontend to the doxygen tool to configure
+and run doxygen on your source files.
+.SH SEE ALSO
+doxygen(1), doxytag(1).
diff --git a/doc/faq.doc b/doc/faq.doc
index c7d84e3..98fe635 100644
--- a/doc/faq.doc
+++ b/doc/faq.doc
@@ -63,7 +63,7 @@ PREDEFINED             = MY_MACRO()=
   </ol> 
 
 <li><b>When I set EXTRACT_ALL to NO none of my functions are shown in the 
-    documentation.</b></li>
+    documentation.</b>
 
 In order for global functions, variables, enums, typedefs, and defines 
 to be documented you should document the file in which these commands are
@@ -78,7 +78,6 @@ For member functions or functions that are part of a namespace you should
 document either the class or namespace.
  
 <li><b>How can I make doxygen ignore some code fragment?</b>
-<p>
 
 The new and easiest way is to add one comment block 
 with a \ref cmdcond "\\cond" command at the start and one comment block 
diff --git a/doc/language.doc b/doc/language.doc
index a94e35a..0b5926a 100644
--- a/doc/language.doc
+++ b/doc/language.doc
@@ -23,7 +23,7 @@ text fragments, generated by doxygen, can be produced in languages other
 than English (the default). The output language is chosen through the
 configuration file (with default name and known as Doxyfile).
 
-Currently (version 1.4.0), 30 languages 
+Currently (version 1.4.1), 30 languages 
 are supported (sorted alphabetically):
 Afrikaans, Brazilian Portuguese, Catalan, Chinese, Chinese
 Traditional, Croatian, Czech, Danish, Dutch, English, Finnish, French,
diff --git a/doc/output.doc b/doc/output.doc
index 1e9b51b..73e6916 100644
--- a/doc/output.doc
+++ b/doc/output.doc
@@ -14,7 +14,7 @@
  * input used in their production; they are not affected by this license.
  *
  */
-/*! \page output.html
+/*! \page output.html Output Formats
 
 \section output Output Formats
 
diff --git a/doc/translator_report.txt b/doc/translator_report.txt
index cfc0a49..c5c1ed5 100644
--- a/doc/translator_report.txt
+++ b/doc/translator_report.txt
@@ -1,4 +1,4 @@
-(1.4.0)
+(1.4.1)
 
 Doxygen supports the following 30 languages (sorted alphabetically):