Release-1.2.2-20001015

1 files changed, 582 insertions, 0 deletions

diff --git a/qtools/qfile_win32.cpp b/qtools/qfile_win32.cpp
new file mode 100644
index 0000000..5272365
--- /dev/null
+++ b/qtools/qfile_win32.cpp
@@ -0,0 +1,582 @@
+/******************************************************************************
+ *
+ * 
+ *
+ * Copyright (C) 1997-2000 by Dimitri van Heesch.
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation under the terms of the GNU General Public License is hereby 
+ * granted. No representations are made about the suitability of this software 
+ * for any purpose. It is provided "as is" without express or implied warranty.
+ * See the GNU General Public License for more details.
+ *
+ * Documents produced by Doxygen are derivative works derived from the
+ * input used in their production; they are not affected by this license.
+ *
+ * Based on qfile_unix.cpp 
+ *
+ * Copyright (C) 1992-2000 Trolltech AS.
+ */
+
+#include "qglobal.h"
+
+#include "qfile.h"
+#include "qfiledefs_p.h"
+
+bool qt_file_access( const QString& fn, int t )
+{
+    if ( fn.isEmpty() )
+	return FALSE;
+    return ACCESS( QFile::encodeName(fn), t ) == 0;
+}
+
+/*!
+  Removes the file \a fileName.
+  Returns TRUE if successful, otherwise FALSE.
+*/
+
+bool QFile::remove( const QString &fileName )
+{
+    if ( fileName.isEmpty() ) {
+#if defined(CHECK_NULL)
+	qWarning( "QFile::remove: Empty or null file name" );
+#endif
+	return FALSE;
+    }
+    return ::remove( QFile::encodeName(fileName) ) == 0;	
+    // unlink more common in UNIX
+}
+
+#if defined(O_NONBLOCK)
+# define HAS_ASYNC_FILEMODE
+# define OPEN_ASYNC O_NONBLOCK
+#elif defined(O_NDELAY)
+# define HAS_ASYNC_FILEMODE
+# define OPEN_ASYNC O_NDELAY
+#endif
+
+/*!
+  Opens the file specified by the file name currently set, using the mode \e m.
+  Returns TRUE if successful, otherwise FALSE.
+
+  The mode parameter \e m must be a combination of the following flags:
+  <ul>
+  <li>\c IO_Raw specified raw (non-buffered) file access.
+  <li>\c IO_ReadOnly opens the file in read-only mode.
+  <li>\c IO_WriteOnly opens the file in write-only mode (and truncates).
+  <li>\c IO_ReadWrite opens the file in read/write mode, equivalent to
+  \c (IO_ReadOnly|IO_WriteOnly).
+  <li>\c IO_Append opens the file in append mode. This mode is very useful
+  when you want to write something to a log file. The file index is set to
+  the end of the file. Note that the result is undefined if you position the
+  file index manually using at() in append mode.
+  <li>\c IO_Truncate truncates the file.
+  <li>\c IO_Translate enables carriage returns and linefeed translation
+  for text files under MS-DOS, Windows and OS/2.
+  </ul>
+
+  The raw access mode is best when I/O is block-operated using 4kB block size
+  or greater. Buffered access works better when reading small portions of
+  data at a time.
+
+  <strong>Important:</strong> When working with buffered files, data may
+  not be written to the file at once. Call \link flush() flush\endlink
+  to make sure the data is really written.
+
+  \warning We have experienced problems with some C libraries when a buffered
+  file is opened for both reading and writing. If a read operation takes place
+  immediately after a write operation, the read buffer contains garbage data.
+  Worse, the same garbage is written to the file. Calling flush() before
+  readBlock() solved this problem.
+
+  If the file does not exist and \c IO_WriteOnly or \c IO_ReadWrite is
+  specified, it is created.
+
+  Example:
+  \code
+    QFile f1( "/tmp/data.bin" );
+    QFile f2( "readme.txt" );
+    f1.open( IO_Raw | IO_ReadWrite | IO_Append );
+    f2.open( IO_ReadOnly | IO_Translate );
+  \endcode
+
+  \sa name(), close(), isOpen(), flush()
+*/
+
+bool QFile::open( int m )
+{
+    if ( isOpen() ) {				// file already open
+#if defined(CHECK_STATE)
+	qWarning( "QFile::open: File already open" );
+#endif
+	return FALSE;
+    }
+    if ( fn.isNull() ) {			// no file name defined
+#if defined(CHECK_NULL)
+	qWarning( "QFile::open: No file name specified" );
+#endif
+	return FALSE;
+    }
+    init();					// reset params
+    setMode( m );
+    if ( !(isReadable() || isWritable()) ) {
+#if defined(CHECK_RANGE)
+	qWarning( "QFile::open: File access not specified" );
+#endif
+	return FALSE;
+    }
+    bool ok = TRUE;
+    STATBUF st;
+    if ( isRaw() ) {				// raw file I/O
+	int oflags = OPEN_RDONLY;
+	if ( isReadable() && isWritable() )
+	    oflags = OPEN_RDWR;
+	else if ( isWritable() )
+	    oflags = OPEN_WRONLY;
+	if ( flags() & IO_Append ) {		// append to end of file?
+	    if ( flags() & IO_Truncate )
+		oflags |= (OPEN_CREAT | OPEN_TRUNC);
+	    else
+		oflags |= (OPEN_APPEND | OPEN_CREAT);
+	    setFlags( flags() | IO_WriteOnly ); // append implies write
+	} else if ( isWritable() ) {		// create/trunc if writable
+	    if ( flags() & IO_Truncate )
+		oflags |= (OPEN_CREAT | OPEN_TRUNC);
+	    else
+		oflags |= OPEN_CREAT;
+	}
+#if defined(HAS_TEXT_FILEMODE)
+	if ( isTranslated() )
+	    oflags |= OPEN_TEXT;
+	else
+	    oflags |= OPEN_BINARY;
+#endif
+#if defined(HAS_ASYNC_FILEMODE)
+	if ( isAsynchronous() )
+	    oflags |= OPEN_ASYNC;
+#endif
+	fd = OPEN( QFile::encodeName(fn), oflags, 0666 );
+
+	if ( fd != -1 ) {			// open successful
+	    FSTAT( fd, &st ); // get the stat for later usage
+	} else {
+	    ok = FALSE;
+	}
+    } else {					// buffered file I/O
+	QCString perm;
+	char perm2[4];
+	bool try_create = FALSE;
+	if ( flags() & IO_Append ) {		// append to end of file?
+	    setFlags( flags() | IO_WriteOnly ); // append implies write
+	    perm = isReadable() ? "a+" : "a";
+	} else {
+	    if ( isReadWrite() ) {
+		if ( flags() & IO_Truncate ) {
+		    perm = "w+";
+		} else {
+		    perm = "r+";
+		    try_create = TRUE;		// try to create if not exists
+		}
+	    } else if ( isReadable() ) {
+		perm = "r";
+	    } else if ( isWritable() ) {
+		perm = "w";
+	    }
+	}
+	qstrcpy( perm2, perm );
+	if ( isTranslated() )
+	    strcat( perm2, "t" );
+	else
+	    strcat( perm2, "b" );
+	while (1) { // At most twice
+
+	    fh = fopen( QFile::encodeName(fn), perm2 );
+
+	    if ( !fh && try_create ) {
+		perm2[0] = 'w';			// try "w+" instead of "r+"
+		try_create = FALSE;
+	    } else {
+		break;
+	    }
+	}
+	if ( fh ) {
+	    FSTAT( FILENO(fh), &st ); // get the stat for later usage
+	} else {
+	    ok = FALSE;
+	}
+    }
+    if ( ok ) {
+	setState( IO_Open );
+	// on successful open the file stat was got; now test what type
+	// of file we have
+	if ( (st.st_mode & STAT_MASK) != STAT_REG ) {
+	    // non-seekable
+	    setType( IO_Sequential );
+	    length = INT_MAX;
+	    ioIndex  = (flags() & IO_Append) == 0 ? 0 : length;
+	} else {
+	    length = (int)st.st_size;
+	    ioIndex  = (flags() & IO_Append) == 0 ? 0 : length;
+	    if ( (flags() & !IO_Truncate) && length == 0 && isReadable() ) {
+		// try if you can read from it (if you can, it's a sequential
+		// device; e.g. a file in the /proc filesystem)
+		int c = getch();
+		if ( c != -1 ) {
+		    ungetch(c);
+		    setType( IO_Sequential );
+		    length = INT_MAX;
+		}
+	    }
+	}
+    } else {
+	init();
+	if ( errno == EMFILE )			// no more file handles/descrs
+	    setStatus( IO_ResourceError );
+	else
+	    setStatus( IO_OpenError );
+    }
+    return ok;
+}
+
+/*!
+  Opens a file in the mode \e m using an existing file handle \e f.
+  Returns TRUE if successful, otherwise FALSE.
+
+  Example:
+  \code
+    #include <stdio.h>
+
+    void printError( const char* msg )
+    {
+	QFile f;
+	f.open( IO_WriteOnly, stderr );
+	f.writeBlock( msg, qstrlen(msg) );	// write to stderr
+	f.close();
+    }
+  \endcode
+
+  When a QFile is opened using this function, close() does not actually
+  close the file, only flushes it.
+
+  \warning If \e f is \c stdin, \c stdout, \c stderr, you may not
+  be able to seek.  See QIODevice::isSequentialAccess() for more
+  information.
+
+  \sa close()
+*/
+
+bool QFile::open( int m, FILE *f )
+{
+    if ( isOpen() ) {
+#if defined(CHECK_RANGE)
+	qWarning( "QFile::open: File already open" );
+#endif
+	return FALSE;
+    }
+    init();
+    setMode( m &~IO_Raw );
+    setState( IO_Open );
+    fh = f;
+    ext_f = TRUE;
+    STATBUF st;
+    FSTAT( FILENO(fh), &st );
+    ioIndex = (int)ftell( fh );
+    if ( (st.st_mode & STAT_MASK) != STAT_REG ) {
+	// non-seekable
+	setType( IO_Sequential );
+	length = INT_MAX;
+    } else {
+	length = (int)st.st_size;
+	if ( (flags() & !IO_Truncate) && length == 0 && isReadable() ) {
+	    // try if you can read from it (if you can, it's a sequential
+	    // device; e.g. a file in the /proc filesystem)
+	    int c = getch();
+	    if ( c != -1 ) {
+		ungetch(c);
+		setType( IO_Sequential );
+		length = INT_MAX;
+	    }
+	}
+    }
+    return TRUE;
+}
+
+/*!
+  Opens a file in the mode \e m using an existing file descriptor \e f.
+  Returns TRUE if successful, otherwise FALSE.
+
+  When a QFile is opened using this function, close() does not actually
+  close the file.
+
+  \warning If \e f is one of 0 (stdin), 1 (stdout) or 2 (stderr), you may not
+  be able to seek. size() is set to \c INT_MAX (in limits.h).
+
+  \sa close()
+*/
+
+
+bool QFile::open( int m, int f )
+{
+    if ( isOpen() ) {
+#if defined(CHECK_RANGE)
+	qWarning( "QFile::open: File already open" );
+#endif
+	return FALSE;
+    }
+    init();
+    setMode( m |IO_Raw );
+    setState( IO_Open );
+    fd = f;
+    ext_f = TRUE;
+    STATBUF st;
+    FSTAT( fd, &st );
+    ioIndex  = (int)LSEEK(fd, 0, SEEK_CUR);
+    if ( (st.st_mode & STAT_MASK) != STAT_REG ) {
+	// non-seekable
+	setType( IO_Sequential );
+	length = INT_MAX;
+    } else {
+	length = (int)st.st_size;
+	if ( length == 0 && isReadable() ) {
+	    // try if you can read from it (if you can, it's a sequential
+	    // device; e.g. a file in the /proc filesystem)
+	    int c = getch();
+	    if ( c != -1 ) {
+		ungetch(c);
+		setType( IO_Sequential );
+		length = INT_MAX;
+	    }
+	}
+    }
+    return TRUE;
+}
+
+/*!
+  Returns the file size.
+  \sa at()
+*/
+
+uint QFile::size() const
+{
+    STATBUF st;
+    if ( isOpen() ) {
+	FSTAT( fh ? FILENO(fh) : fd, &st );
+    } else {
+	STAT( QFile::encodeName(fn), &st );
+    }
+    return st.st_size;
+}
+
+/*!
+  \fn int QFile::at() const
+  Returns the file index.
+  \sa size()
+*/
+
+/*!
+  Sets the file index to \e pos. Returns TRUE if successful, otherwise FALSE.
+
+  Example:
+  \code
+    QFile f( "data.bin" );
+    f.open( IO_ReadOnly );			// index set to 0
+    f.at( 100 );				// set index to 100
+    f.at( f.at()+50 );				// set index to 150
+    f.at( f.size()-80 );			// set index to 80 before EOF
+    f.close();
+  \endcode
+
+  \warning The result is undefined if the file was \link open() opened\endlink
+  using the \c IO_Append specifier.
+
+  \sa size(), open()
+*/
+
+bool QFile::at( int pos )
+{
+    if ( !isOpen() ) {
+#if defined(CHECK_STATE)
+	qWarning( "QFile::at: File is not open" );
+#endif
+	return FALSE;
+    }
+    bool ok;
+    if ( isRaw() ) {				// raw file
+	pos = (int)LSEEK(fd, pos, SEEK_SET);
+	ok = pos != -1;
+    } else {					// buffered file
+	ok = fseek(fh, pos, SEEK_SET) == 0;
+    }
+    if ( ok )
+	ioIndex = pos;
+#if defined(CHECK_RANGE)
+    else
+	qWarning( "QFile::at: Cannot set file position %d", pos );
+#endif
+    return ok;
+}
+
+/*!
+  Reads at most \e len bytes from the file into \e p and returns the
+  number of bytes actually read.
+
+  Returns -1 if a serious error occurred.
+
+  \warning We have experienced problems with some C libraries when a buffered
+  file is opened for both reading and writing. If a read operation takes place
+  immediately after a write operation, the read buffer contains garbage data.
+  Worse, the same garbage is written to the file. Calling flush() before
+  readBlock() solved this problem.
+
+  \sa writeBlock()
+*/
+
+int QFile::readBlock( char *p, uint len )
+{
+#if defined(CHECK_NULL)
+    if ( !p )
+	qWarning( "QFile::readBlock: Null pointer error" );
+#endif
+#if defined(CHECK_STATE)
+    if ( !isOpen() ) {				// file not open
+	qWarning( "QFile::readBlock: File not open" );
+	return -1;
+    }
+    if ( !isReadable() ) {			// reading not permitted
+	qWarning( "QFile::readBlock: Read operation not permitted" );
+	return -1;
+    }
+#endif
+    int nread;					// number of bytes read
+    if ( isRaw() ) {				// raw file
+	nread = READ( fd, p, len );
+	if ( len && nread <= 0 ) {
+	    nread = 0;
+	    setStatus(IO_ReadError);
+	}
+    } else {					// buffered file
+	nread = fread( p, 1, len, fh );
+	if ( (uint)nread != len ) {
+	    if ( ferror( fh ) || nread==0 )
+		setStatus(IO_ReadError);
+	}
+    }
+    ioIndex += nread;
+    return nread;
+}
+
+/*! \overload int writeBlock( const QByteArray& data )
+*/
+
+/*! \reimp
+
+  Writes \e len bytes from \e p to the file and returns the number of
+  bytes actually written.
+
+  Returns -1 if a serious error occurred.
+
+  \warning When working with buffered files, data may not be written
+  to the file at once. Call flush() to make sure the data is really
+  written.
+
+  \sa readBlock()
+*/
+
+int QFile::writeBlock( const char *p, uint len )
+{
+#if defined(CHECK_NULL)
+    if ( p == 0 && len != 0 )
+	qWarning( "QFile::writeBlock: Null pointer error" );
+#endif
+#if defined(CHECK_STATE)
+    if ( !isOpen() ) {				// file not open
+	qWarning( "QFile::writeBlock: File not open" );
+	return -1;
+    }
+    if ( !isWritable() ) {			// writing not permitted
+	qWarning( "QFile::writeBlock: Write operation not permitted" );
+	return -1;
+    }
+#endif
+    int nwritten;				// number of bytes written
+    if ( isRaw() )				// raw file
+	nwritten = WRITE( fd, p, len );
+    else					// buffered file
+	nwritten = fwrite( p, 1, len, fh );
+    if ( nwritten != (int)len ) {		// write error
+	if ( errno == ENOSPC )			// disk is full
+	    setStatus( IO_ResourceError );
+	else
+	    setStatus( IO_WriteError );
+	if ( isRaw() )				// recalc file position
+	    ioIndex = (int)LSEEK( fd, 0, SEEK_CUR );
+	else
+	    ioIndex = fseek( fh, 0, SEEK_CUR );
+    } else {
+	ioIndex += nwritten;
+    }
+    if ( ioIndex > length )			// update file length
+	length = ioIndex;
+    return nwritten;
+}
+
+/*!
+  Returns the file handle of the file.
+
+  This is a small positive integer, suitable for use with C library
+  functions such as fdopen() and fcntl(), as well as with QSocketNotifier.
+
+  If the file is not open or there is an error, handle() returns -1.
+
+  \sa QSocketNotifier
+*/
+
+int QFile::handle() const
+{
+    if ( !isOpen() )
+	return -1;
+    else if ( fh )
+	return FILENO( fh );
+    else
+	return fd;
+}
+
+/*!
+  Closes an open file.
+
+  The file is not closed if it was opened with an existing file handle.
+  If the existing file handle is a \c FILE*, the file is flushed.
+  If the existing file handle is an \c int file descriptor, nothing
+  is done to the file.
+
+  Some "write-behind" filesystems may report an unspecified error on
+  closing the file. These errors only indicate that something may
+  have gone wrong since the previous open(). In such a case status()
+  reports IO_UnspecifiedError after close(), otherwise IO_Ok.
+
+  \sa open(), flush()
+*/
+
+
+void QFile::close()
+{
+    bool ok = FALSE;
+    if ( isOpen() ) {				// file is not open
+	if ( fh ) {				// buffered file
+	    if ( ext_f )
+		ok = fflush( fh ) != -1;	// flush instead of closing
+	    else
+		ok = fclose( fh ) != -1;
+	} else {				// raw file
+	    if ( ext_f )
+		ok = TRUE;			// cannot close
+	    else
+		ok = CLOSE( fd ) != -1;
+	}
+	init();					// restore internal state
+    }
+    if (!ok)
+	setStatus (IO_UnspecifiedError);
+
+    return;
+}