summaryrefslogtreecommitdiffstats
path: root/src/config.xml
diff options
context:
space:
mode:
authorDimitri van Heesch <dimitri@stack.nl>2008-12-06 16:00:07 (GMT)
committerDimitri van Heesch <dimitri@stack.nl>2008-12-06 16:00:07 (GMT)
commitb2ff175fbaa113d17cc8c0873220580df1887b97 (patch)
tree76ffc77ee3c3548adca2711a1ad2ba2d0595ae70 /src/config.xml
parent78a0accf99eacf0a620cfad40c003be3be7bcd97 (diff)
downloadDoxygen-b2ff175fbaa113d17cc8c0873220580df1887b97.zip
Doxygen-b2ff175fbaa113d17cc8c0873220580df1887b97.tar.gz
Doxygen-b2ff175fbaa113d17cc8c0873220580df1887b97.tar.bz2
Release-1.5.7.1-20081206
Diffstat (limited to 'src/config.xml')
-rw-r--r--src/config.xml1383
1 files changed, 1383 insertions, 0 deletions
diff --git a/src/config.xml b/src/config.xml
new file mode 100644
index 0000000..90b77b2
--- /dev/null
+++ b/src/config.xml
@@ -0,0 +1,1383 @@
+<doxygenconfig>
+ <group name='Project' docs='Project related configuration options'>
+ <option type='string' id='DOXYFILE_ENCODING' format='string' docs='
+This tag specifies the encoding used for all characters in the config file
+that follow. The default is UTF-8 which is also the encoding used for all
+text before the first occurrence of this tag. Doxygen uses libiconv (or the
+iconv built into libc) for the transcoding. See
+http://www.gnu.org/software/libiconv for the list of possible encodings.
+' defval='UTF-8'/>
+ <option type='string' id='PROJECT_NAME' format='string' docs='
+The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+by quotes) that should identify the project. ' defval=''/>
+ <option type='string' id='PROJECT_NUMBER' format='string' docs='
+The PROJECT_NUMBER tag can be used to enter a project or revision number.
+This could be handy for archiving the generated documentation or
+if some version control system is used.
+' defval=''/>
+ <option type='string' id='OUTPUT_DIRECTORY' format='dir' docs='
+The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+base path where the generated documentation will be put.
+If a relative path is entered, it will be relative to the location
+where doxygen was started. If left blank the current directory will be used.
+' defval=''/>
+ <option type='bool' id='CREATE_SUBDIRS' docs='
+If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+4096 sub-directories (in 2 levels) under the output directory of each output
+format and will distribute the generated files over these directories.
+Enabling this option can be useful when feeding doxygen a huge amount of
+source files, where putting all generated files in the same directory would
+otherwise cause performance problems for the file system.
+' defval='0'/>
+ <option type='enum' id='OUTPUT_LANGUAGE' defval='English' docs='
+The OUTPUT_LANGUAGE tag is used to specify the language in which all
+documentation generated by doxygen is written. Doxygen will use this
+information to generate all constant output in the proper language.
+The default language is English, other supported languages are:
+Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek,
+Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages),
+Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish,
+Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene,
+Spanish, Swedish, and Ukrainian.
+'>
+ <value name='Afrikaans'/>
+ <value name='Arabic'/>
+ <value name='Brazilian'/>
+ <value name='Catalan'/>
+ <value name='Chinese'/>
+ <value name='Chinese-Traditional'/>
+ <value name='Croatian'/>
+ <value name='Czech'/>
+ <value name='Danish'/>
+ <value name='Dutch'/>
+ <value name='English'/>
+ <value name='Finnish'/>
+ <value name='French'/>
+ <value name='German'/>
+ <value name='Greek'/>
+ <value name='Hungarian'/>
+ <value name='Italian'/>
+ <value name='Japanese'/>
+ <value name='Japanese-en'/>
+ <value name='Korean'/>
+ <value name='Korean-en'/>
+ <value name='Norwegian'/>
+ <value name='Farsi'/>
+ <value name='Persian'/>
+ <value name='Polish'/>
+ <value name='Portuguese'/>
+ <value name='Romanian'/>
+ <value name='Russian'/>
+ <value name='Serbian'/>
+ <value name='Slovak'/>
+ <value name='Slovene'/>
+ <value name='Spanish'/>
+ <value name='Swedish'/>
+ <value name='Ukrainian'/>
+ </option>
+ <option type='bool' id='BRIEF_MEMBER_DESC' docs='
+If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+include brief member descriptions after the members that are listed in
+the file and class documentation (similar to JavaDoc).
+Set to NO to disable this.
+' defval='1'/>
+ <option type='bool' id='REPEAT_BRIEF' docs='
+If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+the brief description of a member or function before the detailed description.
+Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+brief descriptions will be completely suppressed.
+' defval='1'/>
+ <option type='list' id='ABBREVIATE_BRIEF' format='string' docs='
+This tag implements a quasi-intelligent brief description abbreviator
+that is used to form the text in various listings. Each string
+in this list, if found as the leading text of the brief description, will be
+stripped from the text and the result after processing the whole list, is
+used as the annotated text. Otherwise, the brief description is used as-is.
+If left blank, the following values are used (&quot;$name&quot; is automatically
+replaced with the name of the entity): &quot;The $name class&quot; &quot;The $name widget&quot;
+&quot;The $name file&quot; &quot;is&quot; &quot;provides&quot; &quot;specifies&quot; &quot;contains&quot;
+&quot;represents&quot; &quot;a&quot; &quot;an&quot; &quot;the&quot;
+'>
+ <value name='The $name class'/>
+ <value name='The $name widget'/>
+ <value name='The $name file'/>
+ <value name='is'/>
+ <value name='provides'/>
+ <value name='specifies'/>
+ <value name='contains'/>
+ <value name='represents'/>
+ <value name='a'/>
+ <value name='an'/>
+ <value name='the'/>
+ </option>
+ <option type='bool' id='ALWAYS_DETAILED_SEC' docs='
+If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+Doxygen will generate a detailed section even if there is only a brief
+description.
+' defval='0'/>
+ <option type='bool' id='INLINE_INHERITED_MEMB' docs='
+If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+inherited members of a class in the documentation of that class as if those
+members were ordinary class members. Constructors, destructors and assignment
+operators of the base classes will not be shown.
+' defval='0'/>
+ <option type='bool' id='FULL_PATH_NAMES' docs='
+If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+path before files name in the file list and in the header files. If set
+to NO the shortest path that makes the file name unique will be used.
+' defval='1'/>
+ <option type='list' id='STRIP_FROM_PATH' format='string' docs='
+If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+can be used to strip a user-defined part of the path. Stripping is
+only done if one of the specified strings matches the left-hand part of
+the path. The tag can be used to show relative paths in the file list.
+If left blank the directory from which doxygen is run is used as the
+path to strip.
+' depends='FULL_PATH_NAMES'>
+ <value name='/Users/dimitri/doxygen/mail/1.5.7/doxywizard/'/>
+ </option>
+ <option type='list' id='STRIP_FROM_INC_PATH' format='string' docs='
+The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+the path mentioned in the documentation of a class, which tells
+the reader which header file to include in order to use a class.
+If left blank only the name of the header file containing the class
+definition is used. Otherwise one should specify the include paths that
+are normally passed to the compiler using the -I flag.
+'>
+ </option>
+ <option type='bool' id='SHORT_NAMES' docs='
+If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+(but less readable) file names. This can be useful is your file systems
+doesn&apos;t support long names like on DOS, Mac, or CD-ROM.
+' defval='0'/>
+ <option type='bool' id='JAVADOC_AUTOBRIEF' docs='
+If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+will interpret the first line (until the first dot) of a JavaDoc-style
+comment as the brief description. If set to NO, the JavaDoc
+comments will behave just like regular Qt-style comments
+(thus requiring an explicit @brief command for a brief description.)
+' defval='0'/>
+ <option type='bool' id='QT_AUTOBRIEF' docs='
+If the QT_AUTOBRIEF tag is set to YES then Doxygen will
+interpret the first line (until the first dot) of a Qt-style
+comment as the brief description. If set to NO, the comments
+will behave just like regular Qt-style comments (thus requiring
+an explicit \brief command for a brief description.)
+' defval='0'/>
+ <option type='bool' id='MULTILINE_CPP_IS_BRIEF' docs='
+The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+treat a multi-line C++ special comment block (i.e. a block of //! or ///
+comments) as a brief description. This used to be the default behaviour.
+The new default is to treat a multi-line C++ comment block as a detailed
+description. Set this tag to YES if you prefer the old behaviour instead.
+' defval='0'/>
+ <option type='bool' id='INHERIT_DOCS' docs='
+If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+member inherits the documentation from any documented member that it
+re-implements.
+' defval='1'/>
+ <option type='bool' id='SEPARATE_MEMBER_PAGES' docs='
+If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+a new page for each member. If set to NO, the documentation of a member will
+be part of the file/class/namespace that contains it.
+' defval='0'/>
+ <option type='int' id='TAB_SIZE' docs='
+The TAB_SIZE tag can be used to set the number of spaces in a tab.
+Doxygen uses this value to replace tabs by spaces in code fragments.
+' minval='1' maxval='16' defval='8'/>
+ <option type='list' id='ALIASES' format='string' docs='
+This tag can be used to specify a number of aliases that acts
+as commands in the documentation. An alias has the form &quot;name=value&quot;.
+For example adding &quot;sideeffect=\par Side Effects:\n&quot; will allow you to
+put the command \sideeffect (or @sideeffect) in the documentation, which
+will result in a user-defined paragraph with heading &quot;Side Effects:&quot;.
+You can put \n&apos;s in the value part of an alias to insert newlines.
+'>
+ </option>
+ <option type='bool' id='OPTIMIZE_OUTPUT_FOR_C' docs='
+Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+sources only. Doxygen will then generate output that is more tailored for C.
+For instance, some of the names that are used will be different. The list
+of all members will be omitted, etc.
+' defval='0'/>
+ <option type='bool' id='OPTIMIZE_OUTPUT_JAVA' docs='
+Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+sources only. Doxygen will then generate output that is more tailored for
+Java. For instance, namespaces will be presented as packages, qualified
+scopes will look different, etc.
+' defval='0'/>
+ <option type='bool' id='OPTIMIZE_FOR_FORTRAN' docs='
+Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+sources only. Doxygen will then generate output that is more tailored for
+Fortran.
+' defval='0'/>
+ <option type='bool' id='OPTIMIZE_OUTPUT_VHDL' docs='
+Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+sources. Doxygen will then generate output that is tailored for
+VHDL.
+' defval='0'/>
+ <option type='list' id='EXTENSION_MAPPING' format='string' docs='
+Doxygen selects the parser to use depending on the extension of the files it parses.
+With this tag you can assign which parser to use for a given extension.
+Doxygen has a built-in mapping, but you can override or extend it using this tag.
+The format is ext=language, where ext is a file extension, and language is one of
+the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
+Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
+.inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
+use: inc=Fortran f=C
+'>
+ </option>
+ <option type='bool' id='BUILTIN_STL_SUPPORT' docs='
+If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+to include (a tag file for) the STL sources as input, then you should
+set this tag to YES in order to let doxygen match functions declarations and
+definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+func(std::string) {}). This also make the inheritance and collaboration
+diagrams that involve STL classes more complete and accurate.
+' defval='0'/>
+ <option type='bool' id='CPP_CLI_SUPPORT' docs='
+If you use Microsoft&apos;s C++/CLI language, you should set this option to YES to
+enable parsing support.
+' defval='0'/>
+ <option type='bool' id='SIP_SUPPORT' docs='
+Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
+Doxygen will parse them like normal C++ but will assume all classes use public
+instead of private inheritance when no explicit protection keyword is present.
+' defval='0'/>
+ <option type='bool' id='IDL_PROPERTY_SUPPORT' docs='
+For Microsoft&apos;s IDL there are propget and propput attributes to indicate getter
+and setter methods for a property. Setting this option to YES (the default)
+will make doxygen to replace the get and set methods by a property in the
+documentation. This will only work if the methods are indeed getting or
+setting a simple type. If this is not the case, or you want to show the
+methods anyway, you should set this option to NO.
+' defval='1'/>
+ <option type='bool' id='DISTRIBUTE_GROUP_DOC' docs='
+If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+tag is set to YES, then doxygen will reuse the documentation of the first
+member in the group (if any) for the other members of the group. By default
+all members of a group must be documented explicitly.
+' defval='0'/>
+ <option type='bool' id='SUBGROUPING' docs='
+Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+the same type (for instance a group of public functions) to be put as a
+subgroup of that type (e.g. under the Public Functions section). Set it to
+NO to prevent subgrouping. Alternatively, this can be done per class using
+the \nosubgrouping command.
+' defval='1'/>
+ <option type='bool' id='TYPEDEF_HIDES_STRUCT' docs='
+When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
+is documented as struct, union, or enum with the name of the typedef. So
+typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+with name TypeT. When disabled the typedef will appear as a member of a file,
+namespace, or class. And the struct will be named TypeS. This can typically
+be useful for C code in case the coding convention dictates that all compound
+types are typedef&apos;ed and only the typedef is referenced, never the tag name.
+' defval='0'/>
+ <option type='int' id='SYMBOL_CACHE_SIZE' docs='
+The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
+determine which symbols to keep in memory and which to flush to disk.
+When the cache is full, less often used symbols will be written to disk.
+For small to medium size projects (&lt;1000 input files) the default value is
+probably good enough. For larger projects a too small cache size can cause
+doxygen to be busy swapping symbols to and from disk most of the time
+causing a significant performance penality.
+If the system has enough physical memory increasing the cache will improve the
+performance by keeping more symbols in memory. Note that the value works on
+a logarithmic scale so increasing the size by one will rougly double the
+memory usage. The cache size is given by this formula:
+2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
+corresponding to a cache size of 2^16 = 65536 symbols
+' minval='0' maxval='9' defval='0'/>
+ </group>
+ <group name='Build' docs='Build related configuration options'>
+ <option type='bool' id='EXTRACT_ALL' docs='
+If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+documentation are documented, even if no documentation was available.
+Private class members and static file members will be hidden unless
+the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+' defval='0'/>
+ <option type='bool' id='EXTRACT_PRIVATE' docs='
+If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+will be included in the documentation.
+' defval='0'/>
+ <option type='bool' id='EXTRACT_STATIC' docs='
+If the EXTRACT_STATIC tag is set to YES all static members of a file
+will be included in the documentation.
+' defval='0'/>
+ <option type='bool' id='EXTRACT_LOCAL_CLASSES' docs='
+If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+defined locally in source files will be included in the documentation.
+If set to NO only classes defined in header files are included.
+' defval='1'/>
+ <option type='bool' id='EXTRACT_LOCAL_METHODS' docs='
+This flag is only useful for Objective-C code. When set to YES local
+methods, which are defined in the implementation section but not in
+the interface are included in the documentation.
+If set to NO (the default) only methods in the interface are included.
+' defval='0'/>
+ <option type='bool' id='EXTRACT_ANON_NSPACES' docs='
+If this flag is set to YES, the members of anonymous namespaces will be
+extracted and appear in the documentation as a namespace called
+&apos;anonymous_namespace{file}&apos;, where file will be replaced with the base
+name of the file that contains the anonymous namespace. By default
+anonymous namespace are hidden.
+' defval='0'/>
+ <option type='bool' id='HIDE_UNDOC_MEMBERS' docs='
+If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+undocumented members of documented classes, files or namespaces.
+If set to NO (the default) these members will be included in the
+various overviews, but no documentation section is generated.
+This option has no effect if EXTRACT_ALL is enabled.
+' defval='0'/>
+ <option type='bool' id='HIDE_UNDOC_CLASSES' docs='
+If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+undocumented classes that are normally visible in the class hierarchy.
+If set to NO (the default) these classes will be included in the various
+overviews. This option has no effect if EXTRACT_ALL is enabled.
+' defval='0'/>
+ <option type='bool' id='HIDE_FRIEND_COMPOUNDS' docs='
+If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+friend (class|struct|union) declarations.
+If set to NO (the default) these declarations will be included in the
+documentation.
+' defval='0'/>
+ <option type='bool' id='HIDE_IN_BODY_DOCS' docs='
+If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+documentation blocks found inside the body of a function.
+If set to NO (the default) these blocks will be appended to the
+function&apos;s detailed documentation block.
+' defval='0'/>
+ <option type='bool' id='INTERNAL_DOCS' docs='
+The INTERNAL_DOCS tag determines if documentation
+that is typed after a \internal command is included. If the tag is set
+to NO (the default) then the documentation will be excluded.
+Set it to YES to include the internal documentation.
+' defval='0'/>
+ <option type='bool' id='CASE_SENSE_NAMES' docs='
+If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+file names in lower-case letters. If set to YES upper-case letters are also
+allowed. This is useful if you have classes or files whose names only differ
+in case and if your file system supports case sensitive file names. Windows
+and Mac users are advised to set this option to NO.
+' defval='0' altdefval='portable_fileSystemIsCaseSensitive()'/>
+ <option type='bool' id='HIDE_SCOPE_NAMES' docs='
+If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+will show members with their full class and namespace scopes in the
+documentation. If set to YES the scope will be hidden.
+' defval='0'/>
+ <option type='bool' id='SHOW_INCLUDE_FILES' docs='
+If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+will put a list of the files that are included by a file in the documentation
+of that file.
+' defval='1'/>
+ <option type='bool' id='INLINE_INFO' docs='
+If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+is inserted in the documentation for inline members.
+' defval='1'/>
+ <option type='bool' id='SORT_MEMBER_DOCS' docs='
+If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+will sort the (detailed) documentation of file and class members
+alphabetically by member name. If set to NO the members will appear in
+declaration order.
+' defval='1'/>
+ <option type='bool' id='SORT_BRIEF_DOCS' docs='
+If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+brief documentation of file, namespace and class members alphabetically
+by member name. If set to NO (the default) the members will appear in
+declaration order.
+' defval='0'/>
+ <option type='bool' id='SORT_GROUP_NAMES' docs='
+If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
+hierarchy of group names into alphabetical order. If set to NO (the default)
+the group names will appear in their defined order.
+' defval='0'/>
+ <option type='bool' id='SORT_BY_SCOPE_NAME' docs='
+If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+sorted by fully-qualified names, including namespaces. If set to
+NO (the default), the class list will be sorted only by class name,
+not including the namespace part.
+Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+Note: This option applies only to the class list, not to the
+alphabetical list.
+' defval='0'/>
+ <option type='bool' id='GENERATE_TODOLIST' docs='
+The GENERATE_TODOLIST tag can be used to enable (YES) or
+disable (NO) the todo list. This list is created by putting \todo
+commands in the documentation.
+' defval='1'/>
+ <option type='bool' id='GENERATE_TESTLIST' docs='
+The GENERATE_TESTLIST tag can be used to enable (YES) or
+disable (NO) the test list. This list is created by putting \test
+commands in the documentation.
+' defval='1'/>
+ <option type='bool' id='GENERATE_BUGLIST' docs='
+The GENERATE_BUGLIST tag can be used to enable (YES) or
+disable (NO) the bug list. This list is created by putting \bug
+commands in the documentation.
+' defval='1'/>
+ <option type='bool' id='GENERATE_DEPRECATEDLIST' docs='
+The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+disable (NO) the deprecated list. This list is created by putting
+\deprecated commands in the documentation.
+' defval='1'/>
+ <option type='list' id='ENABLED_SECTIONS' format='string' docs='
+The ENABLED_SECTIONS tag can be used to enable conditional
+documentation sections, marked by \if sectionname ... \endif.
+'>
+ </option>
+ <option type='int' id='MAX_INITIALIZER_LINES' docs='
+The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+the initial value of a variable or define consists of for it to appear in
+the documentation. If the initializer consists of more lines than specified
+here it will be hidden. Use a value of 0 to hide initializers completely.
+The appearance of the initializer of individual variables and defines in the
+documentation can be controlled using \showinitializer or \hideinitializer
+command in the documentation regardless of this setting.
+' minval='0' maxval='10000' defval='30'/>
+ <option type='bool' id='SHOW_USED_FILES' docs='
+Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+at the bottom of the documentation of classes and structs. If set to YES the
+list will mention the files that were used to generate the documentation.
+' defval='1'/>
+ <option type='bool' id='SHOW_DIRECTORIES' docs='
+If the sources in your project are distributed over multiple directories
+then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+in the documentation. The default is NO.
+' defval='0'/>
+ <option type='bool' id='SHOW_FILES' docs='
+Set the SHOW_FILES tag to NO to disable the generation of the Files page.
+This will remove the Files entry from the Quick Index and from the
+Folder Tree View (if specified). The default is YES.
+' defval='1'/>
+ <option type='bool' id='SHOW_NAMESPACES' docs='
+Set the SHOW_NAMESPACES tag to NO to disable the generation of the
+Namespaces page. This will remove the Namespaces entry from the Quick Index
+and from the Folder Tree View (if specified). The default is YES.
+' defval='1'/>
+ <option type='string' id='FILE_VERSION_FILTER' format='file' docs='
+The FILE_VERSION_FILTER tag can be used to specify a program or script that
+doxygen should invoke to get the current version for each file (typically from
+the version control system). Doxygen will invoke the program by executing (via
+popen()) the command &lt;command&gt; &lt;input-file&gt;, where &lt;command&gt; is the value of
+the FILE_VERSION_FILTER tag, and &lt;input-file&gt; is the name of an input file
+provided by doxygen. Whatever the program writes to standard output
+is used as the file version. See the manual for examples.
+' defval=''/>
+ <option type='string' id='LAYOUT_FILE' format='file' docs='
+The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
+doxygen. The layout file controls the global structure of the generated output files
+in an output format independent way. The create the layout file that represents
+doxygen&apos;s defaults, run doxygen with the -l option. You can optionally specify a
+file name after the option, if omitted DoxygenLayout.xml will be used as the name
+of the layout file.
+' defval=''/>
+ </group>
+ <group name='Messages' docs='configuration options related to warning and progress messages'>
+ <option type='bool' id='QUIET' docs='
+The QUIET tag can be used to turn on/off the messages that are generated
+by doxygen. Possible values are YES and NO. If left blank NO is used.
+' defval='0'/>
+ <option type='bool' id='WARNINGS' docs='
+The WARNINGS tag can be used to turn on/off the warning messages that are
+generated by doxygen. Possible values are YES and NO. If left blank
+NO is used.
+' defval='1'/>
+ <option type='bool' id='WARN_IF_UNDOCUMENTED' docs='
+If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+automatically be disabled.
+' defval='1'/>
+ <option type='bool' id='WARN_IF_DOC_ERROR' docs='
+If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+potential errors in the documentation, such as not documenting some
+parameters in a documented function, or documenting parameters that
+don&apos;t exist or using markup commands wrongly.
+' defval='1'/>
+ <option type='bool' id='WARN_NO_PARAMDOC' docs='
+This WARN_NO_PARAMDOC option can be abled to get warnings for
+functions that are documented, but have no documentation for their parameters
+or return value. If set to NO (the default) doxygen will only warn about
+wrong or incomplete parameter documentation, but not about the absence of
+documentation.
+' defval='0'/>
+ <option type='string' id='WARN_FORMAT' format='string' docs='
+The WARN_FORMAT tag determines the format of the warning messages that
+doxygen can produce. The string should contain the $file, $line, and $text
+tags, which will be replaced by the file and line number from which the
+warning originated and the warning text. Optionally the format may contain
+$version, which will be replaced by the version of the file (if it could
+be obtained via FILE_VERSION_FILTER)
+' defval='$file:$line: $text'/>
+ <option type='string' id='WARN_LOGFILE' format='file' docs='
+The WARN_LOGFILE tag can be used to specify a file to which warning
+and error messages should be written. If left blank the output is written
+to stderr.
+' defval=''/>
+ </group>
+ <group name='Input' docs='configuration options related to the input files'>
+ <option type='list' id='INPUT' format='filedir' docs='
+The INPUT tag can be used to specify the files and/or directories that contain
+documented source files. You may enter file names like &quot;myfile.cpp&quot; or
+directories like &quot;/usr/src/myproject&quot;. Separate the files or directories
+with spaces.
+'>
+ <value name='/Users/dimitri/doxygen/mail/1.5.7/doxywizard'/>
+ </option>
+ <option type='string' id='INPUT_ENCODING' format='string' docs='
+This tag can be used to specify the character encoding of the source files
+that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
+also the default input encoding. Doxygen uses libiconv (or the iconv built
+into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
+the list of possible encodings.
+' defval='UTF-8'/>
+ <option type='list' id='FILE_PATTERNS' format='string' docs='
+If the value of the INPUT tag contains directories, you can use the
+FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+and *.h) to filter out the source-files in the directories. If left
+blank the following patterns are tested:
+*.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+*.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
+'>
+ <value name='*.c'/>
+ <value name='*.cc'/>
+ <value name='*.cxx'/>
+ <value name='*.cpp'/>
+ <value name='*.c++'/>
+ <value name='*.d'/>
+ <value name='*.java'/>
+ <value name='*.ii'/>
+ <value name='*.ixx'/>
+ <value name='*.ipp'/>
+ <value name='*.i++'/>
+ <value name='*.inl'/>
+ <value name='*.h'/>
+ <value name='*.hh'/>
+ <value name='*.hxx'/>
+ <value name='*.hpp'/>
+ <value name='*.h++'/>
+ <value name='*.idl'/>
+ <value name='*.odl'/>
+ <value name='*.cs'/>
+ <value name='*.php'/>
+ <value name='*.php3'/>
+ <value name='*.inc'/>
+ <value name='*.m'/>
+ <value name='*.mm'/>
+ <value name='*.dox'/>
+ <value name='*.py'/>
+ <value name='*.f90'/>
+ <value name='*.f'/>
+ <value name='*.vhd'/>
+ <value name='*.vhdl'/>
+ </option>
+ <option type='bool' id='RECURSIVE' docs='
+The RECURSIVE tag can be used to turn specify whether or not subdirectories
+should be searched for input files as well. Possible values are YES and NO.
+If left blank NO is used.
+' defval='0'/>
+ <option type='list' id='EXCLUDE' format='filedir' docs='
+The EXCLUDE tag can be used to specify files and/or directories that should
+excluded from the INPUT source files. This way you can easily exclude a
+subdirectory from a directory tree whose root is specified with the INPUT tag.
+'>
+ </option>
+ <option type='bool' id='EXCLUDE_SYMLINKS' docs='
+The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+directories that are symbolic links (a Unix filesystem feature) are excluded
+from the input.
+' defval='0'/>
+ <option type='list' id='EXCLUDE_PATTERNS' format='string' docs='
+If the value of the INPUT tag contains directories, you can use the
+EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+certain files from those directories. Note that the wildcards are matched
+against the file with absolute path, so to exclude all test directories
+for example use the pattern */test/*
+'>
+ </option>
+ <option type='list' id='EXCLUDE_SYMBOLS' format='string' docs='
+The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+(namespaces, classes, functions, etc.) that should be excluded from the
+output. The symbol name can be a fully qualified name, a word, or if the
+wildcard * is used, a substring. Examples: ANamespace, AClass,
+AClass::ANamespace, ANamespace::*Test
+'>
+ </option>
+ <option type='list' id='EXAMPLE_PATH' format='dir' docs='
+The EXAMPLE_PATH tag can be used to specify one or more files or
+directories that contain example code fragments that are included (see
+the \include command).
+'>
+ </option>
+ <option type='list' id='EXAMPLE_PATTERNS' format='string' docs='
+If the value of the EXAMPLE_PATH tag contains directories, you can use the
+EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+and *.h) to filter out the source-files in the directories. If left
+blank all files are included.
+'>
+ <value name='*'/>
+ </option>
+ <option type='bool' id='EXAMPLE_RECURSIVE' docs='
+If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+searched for input files to be used with the \include or \dontinclude
+commands irrespective of the value of the RECURSIVE tag.
+Possible values are YES and NO. If left blank NO is used.
+' defval='0'/>
+ <option type='list' id='IMAGE_PATH' format='dir' docs='
+The IMAGE_PATH tag can be used to specify one or more files or
+directories that contain image that are included in the documentation (see
+the \image command).
+'>
+ </option>
+ <option type='string' id='INPUT_FILTER' format='file' docs='
+The INPUT_FILTER tag can be used to specify a program that doxygen should
+invoke to filter for each input file. Doxygen will invoke the filter program
+by executing (via popen()) the command &lt;filter&gt; &lt;input-file&gt;, where &lt;filter&gt;
+is the value of the INPUT_FILTER tag, and &lt;input-file&gt; is the name of an
+input file. Doxygen will then use the output that the filter program writes
+to standard output. If FILTER_PATTERNS is specified, this tag will be
+ignored.
+' defval=''/>
+ <option type='list' id='FILTER_PATTERNS' format='file' docs='
+The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+basis. Doxygen will compare the file name with each pattern and apply the
+filter if there is a match. The filters are a list of the form:
+pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+is applied to all files.
+'>
+ </option>
+ <option type='bool' id='FILTER_SOURCE_FILES' docs='
+If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+INPUT_FILTER) will be used to filter the input files when producing source
+files to browse (i.e. when SOURCE_BROWSER is set to YES).
+' defval='0'/>
+ </group>
+ <group name='Source Browser' docs='configuration options related to source browsing'>
+ <option type='bool' id='SOURCE_BROWSER' docs='
+If the SOURCE_BROWSER tag is set to YES then a list of source files will
+be generated. Documented entities will be cross-referenced with these sources.
+Note: To get rid of all source code in the generated output, make sure also
+VERBATIM_HEADERS is set to NO.
+' defval='0'/>
+ <option type='bool' id='INLINE_SOURCES' docs='
+Setting the INLINE_SOURCES tag to YES will include the body
+of functions and classes directly in the documentation.
+' defval='0'/>
+ <option type='bool' id='STRIP_CODE_COMMENTS' docs='
+Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+doxygen to hide any special comment blocks from generated source code
+fragments. Normal C and C++ comments will always remain visible.
+' defval='1'/>
+ <option type='bool' id='REFERENCED_BY_RELATION' docs='
+If the REFERENCED_BY_RELATION tag is set to YES
+then for each documented function all documented
+functions referencing it will be listed.
+' defval='0'/>
+ <option type='bool' id='REFERENCES_RELATION' docs='
+If the REFERENCES_RELATION tag is set to YES
+then for each documented function all documented entities
+called/used by that function will be listed.
+' defval='0'/>
+ <option type='bool' id='REFERENCES_LINK_SOURCE' docs='
+If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+link to the source code. Otherwise they will link to the documentation.
+' defval='1'/>
+ <option type='bool' id='USE_HTAGS' docs='
+If the USE_HTAGS tag is set to YES then the references to source code
+will point to the HTML generated by the htags(1) tool instead of doxygen
+built-in source browser. The htags tool is part of GNU&apos;s global source
+tagging system (see http://www.gnu.org/software/global/global.html). You
+will need version 4.8.6 or higher.
+' defval='0' depends='SOURCE_BROWSER'/>
+ <option type='bool' id='VERBATIM_HEADERS' docs='
+If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+will generate a verbatim copy of the header file for each class for
+which an include is specified. Set to NO to disable this.
+' defval='1'/>
+ </group>
+ <group name='Index' docs='configuration options related to the alphabetical class index'>
+ <option type='bool' id='ALPHABETICAL_INDEX' docs='
+If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+of all compounds will be generated. Enable this if the project
+contains a lot of classes, structs, unions or interfaces.
+' defval='0'/>
+ <option type='int' id='COLS_IN_ALPHA_INDEX' docs='
+If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+in which this list will be split (can be a number in the range [1..20])
+' minval='1' maxval='20' defval='5'/>
+ <option type='list' id='IGNORE_PREFIX' format='string' docs='
+In case all classes in a project start with a common prefix, all
+classes will be put under the same header in the alphabetical index.
+The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+should be ignored while generating the index headers.
+'>
+ </option>
+ </group>
+ <group name='HTML' docs='configuration options related to the HTML output'>
+ <option type='bool' id='GENERATE_HTML' docs='
+If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+generate HTML output.
+' defval='1'/>
+ <option type='string' id='HTML_OUTPUT' format='dir' docs='
+The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+If a relative path is entered the value of OUTPUT_DIRECTORY will be
+put in front of it. If left blank `html&apos; will be used as the default path.
+' defval='html' depends='GENERATE_HTML'/>
+ <option type='string' id='HTML_FILE_EXTENSION' format='string' docs='
+The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+doxygen will generate files with .html extension.
+' defval='.html' depends='GENERATE_HTML'/>
+ <option type='string' id='HTML_HEADER' format='file' docs='
+The HTML_HEADER tag can be used to specify a personal HTML header for
+each generated HTML page. If it is left blank doxygen will generate a
+standard header.
+' defval='' depends='GENERATE_HTML'/>
+ <option type='string' id='HTML_FOOTER' format='file' docs='
+The HTML_FOOTER tag can be used to specify a personal HTML footer for
+each generated HTML page. If it is left blank doxygen will generate a
+standard footer.
+' defval='' depends='GENERATE_HTML'/>
+ <option type='string' id='HTML_STYLESHEET' format='file' docs='
+The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+style sheet that is used by each HTML page. It can be used to
+fine-tune the look of the HTML output. If the tag is left blank doxygen
+will generate a default style sheet. Note that doxygen will try to copy
+the style sheet file to the HTML output directory, so don&apos;t put your own
+stylesheet in the HTML output directory as well, or it will be erased!
+' defval='' depends='GENERATE_HTML'/>
+ <option type='bool' id='HTML_ALIGN_MEMBERS' docs='
+If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+files or namespaces will be aligned in HTML using tables. If set to
+NO a bullet list will be used.
+' defval='1' depends='GENERATE_HTML'/>
+ <option type='bool' id='HTML_DYNAMIC_SECTIONS' docs='
+If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+documentation will contain sections that can be hidden and shown after the
+page has loaded. For this to work a browser that supports
+JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
+Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+' defval='0' depends='GENERATE_HTML'/>
+ <option type='bool' id='GENERATE_DOCSET' docs='
+If the GENERATE_DOCSET tag is set to YES, additional index files
+will be generated that can be used as input for Apple&apos;s Xcode 3
+integrated development environment, introduced with OSX 10.5 (Leopard).
+To create a documentation set, doxygen will generate a Makefile in the
+HTML output directory. Running make will produce the docset in that
+directory and running &quot;make install&quot; will install the docset in
+~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
+it at startup.
+See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
+' defval='0' depends='GENERATE_HTML'/>
+ <option type='string' id='DOCSET_FEEDNAME' format='string' docs='
+When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
+feed. A documentation feed provides an umbrella under which multiple
+documentation sets from a single provider (such as a company or product suite)
+can be grouped.
+' defval='Doxygen generated docs' depends='GENERATE_DOCSET'/>
+ <option type='string' id='DOCSET_BUNDLE_ID' format='string' docs='
+When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
+should uniquely identify the documentation set bundle. This should be a
+reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
+will append .docset to the name.
+' defval='org.doxygen.Project' depends='GENERATE_DOCSET'/>
+ <option type='bool' id='GENERATE_HTMLHELP' docs='
+If the GENERATE_HTMLHELP tag is set to YES, additional index files
+will be generated that can be used as input for tools like the
+Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
+of the generated HTML documentation.
+' defval='0' depends='GENERATE_HTML'/>
+ <option type='string' id='CHM_FILE' format='file' docs='
+If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+be used to specify the file name of the resulting .chm file. You
+can add a path in front of the file if the result should not be
+written to the html output directory.
+' defval='' depends='GENERATE_HTMLHELP'/>
+ <option type='string' id='HHC_LOCATION' format='file' docs='
+If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+be used to specify the location (absolute path including file name) of
+the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+the HTML help compiler on the generated index.hhp.
+' defval='' depends='GENERATE_HTMLHELP'/>
+ <option type='bool' id='GENERATE_CHI' docs='
+If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+controls if a separate .chi index file is generated (YES) or that
+it should be included in the master .chm file (NO).
+' defval='0' depends='GENERATE_HTMLHELP'/>
+ <option type='string' id='CHM_INDEX_ENCODING' format='string' docs='
+If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
+is used to encode HtmlHelp index (hhk), content (hhc) and project file
+content.
+' defval='' depends='GENERATE_HTMLHELP'/>
+ <option type='bool' id='BINARY_TOC' docs='
+If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+controls whether a binary table of contents is generated (YES) or a
+normal table of contents (NO) in the .chm file.
+' defval='0' depends='GENERATE_HTMLHELP'/>
+ <option type='bool' id='TOC_EXPAND' docs='
+The TOC_EXPAND flag can be set to YES to add extra items for group members
+to the contents of the HTML help documentation and to the tree view.
+' defval='0' depends='GENERATE_HTMLHELP'/>
+ <option type='bool' id='GENERATE_QHP' docs='
+If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
+are set, an additional index file will be generated that can be used as input for
+Qt&apos;s qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
+HTML documentation.
+' defval='0' depends='GENERATE_HTML'/>
+ <option type='string' id='QCH_FILE' format='file' docs='
+If the QHG_LOCATION tag is specified, the QCH_FILE tag can
+be used to specify the file name of the resulting .qch file.
+The path specified is relative to the HTML output folder.
+' defval='' depends='GENERATE_QHP'/>
+ <option type='string' id='QHP_NAMESPACE' format='string' docs='
+The QHP_NAMESPACE tag specifies the namespace to use when generating
+Qt Help Project output. For more information please see
+http://doc.trolltech.com/qthelpproject.html#namespace
+' defval='' depends='GENERATE_QHP'/>
+ <option type='string' id='QHP_VIRTUAL_FOLDER' format='string' docs='
+The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
+Qt Help Project output. For more information please see
+http://doc.trolltech.com/qthelpproject.html#virtual-folders
+' defval='doc' depends='GENERATE_QHP'/>
+ <option type='string' id='QHP_CUST_FILTER_NAME' format='string' docs='
+If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
+For more information please see
+http://doc.trolltech.com/qthelpproject.html#custom-filters
+' defval='' depends='GENERATE_QHP'/>
+ <option type='string' id='QHP_CUST_FILTER_ATTRS' format='string' docs='
+The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
+&lt;a href=&quot;http://doc.trolltech.com/qthelpproject.html#custom-filters&quot;&gt;Qt Help Project / Custom Filters&lt;/a&gt;.
+' defval='' depends='GENERATE_QHP'/>
+ <option type='string' id='QHP_SECT_FILTER_ATTRS' format='string' docs='
+The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project&apos;s
+filter section matches.
+&lt;a href=&quot;http://doc.trolltech.com/qthelpproject.html#filter-attributes&quot;&gt;Qt Help Project / Filter Attributes&lt;/a&gt;.
+' defval='' depends='GENERATE_QHP'/>
+ <option type='string' id='QHG_LOCATION' format='file' docs='
+If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
+be used to specify the location of Qt&apos;s qhelpgenerator.
+If non-empty doxygen will try to run qhelpgenerator on the generated
+.qhp file.
+' defval='' depends='GENERATE_QHP'/>
+ <option type='bool' id='DISABLE_INDEX' docs='
+The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+top of each HTML page. The value NO (the default) enables the index and
+the value YES disables it.
+' defval='0' depends='GENERATE_HTML'/>
+ <option type='int' id='ENUM_VALUES_PER_LINE' docs='
+This tag can be used to set the number of enum values (range [1..20])
+that doxygen will group on one line in the generated HTML documentation.
+' minval='1' maxval='20' defval='4' depends='GENERATE_HTML'/>
+ <option type='enum' id='GENERATE_TREEVIEW' defval='NONE' docs='
+The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+structure should be generated to display hierarchical information.
+If the tag value is set to FRAME, a side panel will be generated
+containing a tree-like index structure (just like the one that
+is generated for HTML Help). For this to work a browser that supports
+JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
+Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
+probably better off using the HTML help feature. Other possible values
+for this tag are: HIERARCHIES, which will generate the Groups, Directories,
+and Class Hierarchy pages using a tree view instead of an ordered list;
+ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which
+disables this behavior completely. For backwards compatibility with previous
+releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
+respectively.
+' depends='GENERATE_HTML'>
+ <value name='NONE'/>
+ <value name='FRAME'/>
+ <value name='HIERARCHIES'/>
+ <value name='ALL'/>
+ </option>
+ <option type='int' id='TREEVIEW_WIDTH' docs='
+If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+used to set the initial width (in pixels) of the frame in which the tree
+is shown.
+' minval='0' maxval='1500' defval='250' depends='GENERATE_HTML'/>
+ <option type='int' id='FORMULA_FONTSIZE' docs='
+Use this tag to change the font size of Latex formulas included
+as images in the HTML documentation. The default is 10. Note that
+when you change the font size after a successful doxygen run you need
+to manually remove any form_*.png images from the HTML output directory
+to force them to be regenerated.
+' minval='8' maxval='50' defval='10' depends='GENERATE_HTML'/>
+ </group>
+ <group name='LaTeX' docs='configuration options related to the LaTeX output'>
+ <option type='bool' id='GENERATE_LATEX' docs='
+If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+generate Latex output.
+' defval='1'/>
+ <option type='string' id='LATEX_OUTPUT' format='dir' docs='
+The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+If a relative path is entered the value of OUTPUT_DIRECTORY will be
+put in front of it. If left blank `latex&apos; will be used as the default path.
+' defval='latex' depends='GENERATE_LATEX'/>
+ <option type='string' id='LATEX_CMD_NAME' format='file' docs='
+The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+invoked. If left blank `latex&apos; will be used as the default command name.
+' defval='latex' depends='GENERATE_LATEX'/>
+ <option type='string' id='MAKEINDEX_CMD_NAME' format='file' docs='
+The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+generate index for LaTeX. If left blank `makeindex&apos; will be used as the
+default command name.
+' defval='makeindex' depends='GENERATE_LATEX'/>
+ <option type='bool' id='COMPACT_LATEX' docs='
+If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+LaTeX documents. This may be useful for small projects and may help to
+save some trees in general.
+' defval='0' depends='GENERATE_LATEX'/>
+ <option type='enum' id='PAPER_TYPE' defval='a4wide' docs='
+The PAPER_TYPE tag can be used to set the paper type that is used
+by the printer. Possible values are: a4, a4wide, letter, legal and
+executive. If left blank a4wide will be used.
+' depends='GENERATE_LATEX'>
+ <value name='a4'/>
+ <value name='a4wide'/>
+ <value name='letter'/>
+ <value name='legal'/>
+ <value name='executive'/>
+ </option>
+ <option type='list' id='EXTRA_PACKAGES' format='string' docs='
+The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+packages that should be included in the LaTeX output.
+' depends='GENERATE_LATEX'>
+ </option>
+ <option type='string' id='LATEX_HEADER' format='file' docs='
+The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+the generated latex document. The header should contain everything until
+the first chapter. If it is left blank doxygen will generate a
+standard header. Notice: only use this tag if you know what you are doing!
+' defval='' depends='GENERATE_LATEX'/>
+ <option type='bool' id='PDF_HYPERLINKS' docs='
+If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+is prepared for conversion to pdf (using ps2pdf). The pdf file will
+contain links (just like the HTML output) instead of page references
+This makes the output suitable for online browsing using a pdf viewer.
+' defval='1' depends='GENERATE_LATEX'/>
+ <option type='bool' id='USE_PDFLATEX' docs='
+If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+plain latex in the generated Makefile. Set this option to YES to get a
+higher quality PDF documentation.
+' defval='1' depends='GENERATE_LATEX'/>
+ <option type='bool' id='LATEX_BATCHMODE' docs='
+If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+command to the generated LaTeX files. This will instruct LaTeX to keep
+running if errors occur, instead of asking the user for help.
+This option is also used when generating formulas in HTML.
+' defval='0' depends='GENERATE_LATEX'/>
+ <option type='bool' id='LATEX_HIDE_INDICES' docs='
+If LATEX_HIDE_INDICES is set to YES then doxygen will not
+include the index chapters (such as File Index, Compound Index, etc.)
+in the output.
+' defval='0' depends='GENERATE_LATEX'/>
+ </group>
+ <group name='RTF' docs='configuration options related to the RTF output'>
+ <option type='bool' id='GENERATE_RTF' docs='
+If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+The RTF output is optimized for Word 97 and may not look very pretty with
+other RTF readers or editors.
+' defval='0'/>
+ <option type='string' id='RTF_OUTPUT' format='dir' docs='
+The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+If a relative path is entered the value of OUTPUT_DIRECTORY will be
+put in front of it. If left blank `rtf&apos; will be used as the default path.
+' defval='rtf' depends='GENERATE_RTF'/>
+ <option type='bool' id='COMPACT_RTF' docs='
+If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+RTF documents. This may be useful for small projects and may help to
+save some trees in general.
+' defval='0' depends='GENERATE_RTF'/>
+ <option type='bool' id='RTF_HYPERLINKS' docs='
+If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+will contain hyperlink fields. The RTF file will
+contain links (just like the HTML output) instead of page references.
+This makes the output suitable for online browsing using WORD or other
+programs which support those fields.
+Note: wordpad (write) and others do not support links.
+' defval='0' depends='GENERATE_RTF'/>
+ <option type='string' id='RTF_STYLESHEET_FILE' format='file' docs='
+Load stylesheet definitions from file. Syntax is similar to doxygen&apos;s
+config file, i.e. a series of assignments. You only have to provide
+replacements, missing definitions are set to their default value.
+' defval='' depends='GENERATE_RTF'/>
+ <option type='string' id='RTF_EXTENSIONS_FILE' format='file' docs='
+Set optional variables used in the generation of an rtf document.
+Syntax is similar to doxygen&apos;s config file.
+' defval='' depends='GENERATE_RTF'/>
+ </group>
+ <group name='Man' docs='configuration options related to the man page output'>
+ <option type='bool' id='GENERATE_MAN' docs='
+If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+generate man pages
+' defval='0'/>
+ <option type='string' id='MAN_OUTPUT' format='dir' docs='
+The MAN_OUTPUT tag is used to specify where the man pages will be put.
+If a relative path is entered the value of OUTPUT_DIRECTORY will be
+put in front of it. If left blank `man&apos; will be used as the default path.
+' defval='man' depends='GENERATE_MAN'/>
+ <option type='string' id='MAN_EXTENSION' format='string' docs='
+The MAN_EXTENSION tag determines the extension that is added to
+the generated man pages (default is the subroutine&apos;s section .3)
+' defval='.3' depends='GENERATE_MAN'/>
+ <option type='bool' id='MAN_LINKS' docs='
+If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+then it will generate one additional man file for each entity
+documented in the real man page(s). These additional files
+only source the real man page, but without them the man command
+would be unable to find the correct page. The default is NO.
+' defval='0' depends='GENERATE_MAN'/>
+ </group>
+ <group name='XML' docs='configuration options related to the XML output'>
+ <option type='bool' id='GENERATE_XML' docs='
+If the GENERATE_XML tag is set to YES Doxygen will
+generate an XML file that captures the structure of
+the code including all documentation.
+' defval='0'/>
+ <option type='string' id='XML_OUTPUT' format='dir' docs='
+The XML_OUTPUT tag is used to specify where the XML pages will be put.
+If a relative path is entered the value of OUTPUT_DIRECTORY will be
+put in front of it. If left blank `xml&apos; will be used as the default path.
+' defval='xml' depends='GENERATE_XML'/>
+ <option type='string' id='XML_SCHEMA' format='string' docs='
+The XML_SCHEMA tag can be used to specify an XML schema,
+which can be used by a validating XML parser to check the
+syntax of the XML files.
+' defval='' depends='GENERATE_XML'/>
+ <option type='string' id='XML_DTD' format='string' docs='
+The XML_DTD tag can be used to specify an XML DTD,
+which can be used by a validating XML parser to check the
+syntax of the XML files.
+' defval='' depends='GENERATE_XML'/>
+ <option type='bool' id='XML_PROGRAMLISTING' docs='
+If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+dump the program listings (including syntax highlighting
+and cross-referencing information) to the XML output. Note that
+enabling this will significantly increase the size of the XML output.
+' defval='1' depends='GENERATE_XML'/>
+ </group>
+ <group name='DEF' docs='configuration options for the AutoGen Definitions output'>
+ <option type='bool' id='GENERATE_AUTOGEN_DEF' docs='
+If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+generate an AutoGen Definitions (see autogen.sf.net) file
+that captures the structure of the code including all
+documentation. Note that this feature is still experimental
+and incomplete at the moment.
+' defval='0'/>
+ </group>
+ <group name='PerlMod' docs='configuration options related to the Perl module output'>
+ <option type='bool' id='GENERATE_PERLMOD' docs='
+If the GENERATE_PERLMOD tag is set to YES Doxygen will
+generate a Perl module file that captures the structure of
+the code including all documentation. Note that this
+feature is still experimental and incomplete at the
+moment.
+' defval='0'/>
+ <option type='bool' id='PERLMOD_LATEX' docs='
+If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+the necessary Makefile rules, Perl scripts and LaTeX code to be able
+to generate PDF and DVI output from the Perl module output.
+' defval='0' depends='GENERATE_PERLMOD'/>
+ <option type='bool' id='PERLMOD_PRETTY' docs='
+If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+nicely formatted so it can be parsed by a human reader. This is useful
+if you want to understand what is going on. On the other hand, if this
+tag is set to NO the size of the Perl module output will be much smaller
+and Perl will parse it just the same.
+' defval='1' depends='GENERATE_PERLMOD'/>
+ <option type='string' id='PERLMOD_MAKEVAR_PREFIX' format='string' docs='
+The names of the make variables in the generated doxyrules.make file
+are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+This is useful so different doxyrules.make files included by the same
+Makefile don&apos;t overwrite each other&apos;s variables.' defval='' depends='GENERATE_PERLMOD'/>
+ </group>
+ <group name='Preprocessor' docs='Configuration options related to the preprocessor '>
+ <option type='bool' id='ENABLE_PREPROCESSING' docs='
+If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+evaluate all C-preprocessor directives found in the sources and include
+files.
+' defval='1'/>
+ <option type='bool' id='MACRO_EXPANSION' docs='
+If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+names in the source code. If set to NO (the default) only conditional
+compilation will be performed. Macro expansion can be done in a controlled
+way by setting EXPAND_ONLY_PREDEF to YES.
+' defval='0' depends='ENABLE_PREPROCESSING'/>
+ <option type='bool' id='EXPAND_ONLY_PREDEF' docs='
+If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+then the macro expansion is limited to the macros specified with the
+PREDEFINED and EXPAND_AS_DEFINED tags.
+' defval='0' depends='ENABLE_PREPROCESSING'/>
+ <option type='bool' id='SEARCH_INCLUDES' docs='
+If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+in the INCLUDE_PATH (see below) will be search if a #include is found.
+' defval='1' depends='ENABLE_PREPROCESSING'/>
+ <option type='list' id='INCLUDE_PATH' format='dir' docs='
+The INCLUDE_PATH tag can be used to specify one or more directories that
+contain include files that are not input files but should be processed by
+the preprocessor.
+' depends='ENABLE_PREPROCESSING'>
+ </option>
+ <option type='list' id='INCLUDE_FILE_PATTERNS' format='string' docs='
+You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+patterns (like *.h and *.hpp) to filter out the header-files in the
+directories. If left blank, the patterns specified with FILE_PATTERNS will
+be used.
+' depends='ENABLE_PREPROCESSING'>
+ </option>
+ <option type='list' id='PREDEFINED' format='string' docs='
+The PREDEFINED tag can be used to specify one or more macro names that
+are defined before the preprocessor is started (similar to the -D option of
+gcc). The argument of the tag is a list of macros of the form: name
+or name=definition (no spaces). If the definition and the = are
+omitted =1 is assumed. To prevent a macro definition from being
+undefined via #undef or recursively expanded use the := operator
+instead of the = operator.
+' depends='ENABLE_PREPROCESSING'>
+ </option>
+ <option type='list' id='EXPAND_AS_DEFINED' format='string' docs='
+If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+this tag can be used to specify a list of macro names that should be expanded.
+The macro definition that is found in the sources will be used.
+Use the PREDEFINED tag if you want to use a different macro definition.
+' depends='ENABLE_PREPROCESSING'>
+ </option>
+ <option type='bool' id='SKIP_FUNCTION_MACROS' docs='
+If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+doxygen&apos;s preprocessor will remove all function-like macros that are alone
+on a line, have an all uppercase name, and do not end with a semicolon. Such
+function macros are typically used for boiler-plate code, and will confuse
+the parser if not removed.
+' defval='1' depends='ENABLE_PREPROCESSING'/>
+ </group>
+ <group name='External' docs='Configuration::additions related to external references '>
+ <option type='list' id='TAGFILES' format='file' docs='
+The TAGFILES option can be used to specify one or more tagfiles.
+Optionally an initial location of the external documentation
+can be added for each tagfile. The format of a tag file without
+this location is as follows:
+ TAGFILES = file1 file2 ...
+Adding location for the tag files is done as follows:
+ TAGFILES = file1=loc1 &quot;file2 = loc2&quot; ...
+where &quot;loc1&quot; and &quot;loc2&quot; can be relative or absolute paths or
+URLs. If a location is present for each tag, the installdox tool
+does not have to be run to correct the links.
+Note that each tag file must have a unique name
+(where the name does NOT include the path)
+If a tag file is not located in the directory in which doxygen
+is run, you must also specify the path to the tagfile here.
+'>
+ </option>
+ <option type='string' id='GENERATE_TAGFILE' format='file' docs='
+When a file name is specified after GENERATE_TAGFILE, doxygen will create
+a tag file that is based on the input files it reads.
+' defval=''/>
+ <option type='bool' id='ALLEXTERNALS' docs='
+If the ALLEXTERNALS tag is set to YES all external classes will be listed
+in the class index. If set to NO only the inherited external classes
+will be listed.
+' defval='0'/>
+ <option type='bool' id='EXTERNAL_GROUPS' docs='
+If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+in the modules index. If set to NO, only the current project&apos;s groups will
+be listed.
+' defval='1'/>
+ <option type='string' id='PERL_PATH' format='dir' docs='
+The PERL_PATH should be the absolute path and name of the perl script
+interpreter (i.e. the result of `which perl&apos;).
+' defval='/usr/bin/perl'/>
+ </group>
+ <group name='Dot' docs='Configuration options related to the dot tool '>
+ <option type='bool' id='CLASS_DIAGRAMS' docs='
+If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+or super classes. Setting the tag to NO turns the diagrams off. Note that
+this option is superseded by the HAVE_DOT option below. This is only a
+fallback. It is recommended to install and use dot, since it yields more
+powerful graphs.
+' defval='1'/>
+ <option type='string' id='MSCGEN_PATH' format='string' docs='
+You can define message sequence charts within doxygen comments using the \msc
+command. Doxygen will then run the mscgen tool (see
+http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
+documentation. The MSCGEN_PATH tag allows you to specify the directory where
+the mscgen tool resides. If left empty the tool is assumed to be found in the
+default search path.
+' defval=''/>
+ <option type='bool' id='HIDE_UNDOC_RELATIONS' docs='
+If set to YES, the inheritance and collaboration graphs will hide
+inheritance and usage relations if the target is undocumented
+or is not a class.
+' defval='1'/>
+ <option type='bool' id='HAVE_DOT' docs='
+If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+available from the path. This tool is part of Graphviz, a graph visualization
+toolkit from AT&amp;T and Lucent Bell Labs. The other options in this section
+have no effect if this option is set to NO (the default)
+' defval='0'/>
+ <option type='string' id='DOT_FONTNAME' format='string' docs='
+By default doxygen will write a font called FreeSans.ttf to the output
+directory and reference it in all dot files that doxygen generates. This
+font does not include all possible unicode characters however, so when you need
+these (or just want a differently looking font) you can specify the font name
+using DOT_FONTNAME. You need need to make sure dot is able to find the font,
+which can be done by putting it in a standard location or by setting the
+DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
+containing the font.
+' defval='FreeSans' depends='HAVE_DOT'/>
+ <option type='int' id='DOT_FONTSIZE' docs='
+The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
+The default size is 10pt.
+' minval='4' maxval='24' defval='10' depends='HAVE_DOT'/>
+ <option type='string' id='DOT_FONTPATH' format='string' docs='
+By default doxygen will tell dot to use the output directory to look for the
+FreeSans.ttf font (which doxygen will put there itself). If you specify a
+different font using DOT_FONTNAME you can set the path where dot
+can find it using this tag.
+' defval='' depends='HAVE_DOT'/>
+ <option type='bool' id='CLASS_GRAPH' docs='
+If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+will generate a graph for each documented class showing the direct and
+indirect inheritance relations. Setting this tag to YES will force the
+the CLASS_DIAGRAMS tag to NO.
+' defval='1' depends='HAVE_DOT'/>
+ <option type='bool' id='COLLABORATION_GRAPH' docs='
+If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+will generate a graph for each documented class showing the direct and
+indirect implementation dependencies (inheritance, containment, and
+class references variables) of the class with other documented classes.
+' defval='1' depends='HAVE_DOT'/>
+ <option type='bool' id='GROUP_GRAPHS' docs='
+If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+will generate a graph for groups, showing the direct groups dependencies
+' defval='1' depends='HAVE_DOT'/>
+ <option type='bool' id='UML_LOOK' docs='
+If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+collaboration diagrams in a style similar to the OMG&apos;s Unified Modeling
+Language.
+' defval='0' depends='HAVE_DOT'/>
+ <option type='bool' id='TEMPLATE_RELATIONS' docs='
+If set to YES, the inheritance and collaboration graphs will show the
+relations between templates and their instances.
+' defval='0' depends='HAVE_DOT'/>
+ <option type='bool' id='INCLUDE_GRAPH' docs='
+If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+tags are set to YES then doxygen will generate a graph for each documented
+file showing the direct and indirect include dependencies of the file with
+other documented files.
+' defval='1' depends='HAVE_DOT'/>
+ <option type='bool' id='INCLUDED_BY_GRAPH' docs='
+If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+documented header file showing the documented files that directly or
+indirectly include this file.
+' defval='1' depends='HAVE_DOT'/>
+ <option type='bool' id='CALL_GRAPH' docs='
+If the CALL_GRAPH and HAVE_DOT options are set to YES then
+doxygen will generate a call dependency graph for every global function
+or class method. Note that enabling this option will significantly increase
+the time of a run. So in most cases it will be better to enable call graphs
+for selected functions only using the \callgraph command.
+' defval='0' depends='HAVE_DOT'/>
+ <option type='bool' id='CALLER_GRAPH' docs='
+If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
+doxygen will generate a caller dependency graph for every global function
+or class method. Note that enabling this option will significantly increase
+the time of a run. So in most cases it will be better to enable caller
+graphs for selected functions only using the \callergraph command.
+' defval='0' depends='HAVE_DOT'/>
+ <option type='bool' id='GRAPHICAL_HIERARCHY' docs='
+If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+will graphical hierarchy of all classes instead of a textual one.
+' defval='1' depends='HAVE_DOT'/>
+ <option type='bool' id='DIRECTORY_GRAPH' docs='
+If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+then doxygen will show the dependencies a directory has on other directories
+in a graphical way. The dependency relations are determined by the #include
+relations between the files in the directories.
+' defval='1' depends='HAVE_DOT'/>
+ <option type='enum' id='DOT_IMAGE_FORMAT' defval='png' docs='
+The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+generated by dot. Possible values are png, jpg, or gif
+If left blank png will be used.
+' depends='HAVE_DOT'>
+ <value name='png'/>
+ <value name='jpg'/>
+ <value name='gif'/>
+ </option>
+ <option type='string' id='DOT_PATH' format='dir' docs='
+The tag DOT_PATH can be used to specify the path where the dot tool can be
+found. If left blank, it is assumed the dot tool can be found in the path.
+' defval='' depends='HAVE_DOT'/>
+ <option type='list' id='DOTFILE_DIRS' format='dir' docs='
+The DOTFILE_DIRS tag can be used to specify one or more directories that
+contain dot files that are included in the documentation (see the
+\dotfile command).
+' depends='HAVE_DOT'>
+ </option>
+ <option type='int' id='DOT_GRAPH_MAX_NODES' docs='
+The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
+nodes that will be shown in the graph. If the number of nodes in a graph
+becomes larger than this value, doxygen will truncate the graph, which is
+visualized by representing a node as a red box. Note that doxygen if the
+number of direct children of the root node in a graph is already larger than
+DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
+that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+' minval='0' maxval='10000' defval='50' depends='HAVE_DOT'/>
+ <option type='int' id='MAX_DOT_GRAPH_DEPTH' docs='
+The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+graphs generated by dot. A depth value of 3 means that only nodes reachable
+from the root by following a path via at most 3 edges will be shown. Nodes
+that lay further from the root node will be omitted. Note that setting this
+option to 1 or 2 may greatly reduce the computation time needed for large
+code bases. Also note that the size of a graph can be further restricted by
+DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+' minval='0' maxval='1000' defval='0' depends='HAVE_DOT'/>
+ <option type='bool' id='DOT_TRANSPARENT' docs='
+Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+background. This is disabled by default, because dot on Windows does not
+seem to support this out of the box. Warning: Depending on the platform used,
+enabling this option may lead to badly anti-aliased labels on the edges of
+a graph (i.e. they become hard to read).
+' defval='0' depends='HAVE_DOT'/>
+ <option type='bool' id='DOT_MULTI_TARGETS' docs='
+Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+files in one run (i.e. multiple -o and -T options on the command line). This
+makes dot run faster, but since only newer versions of dot (&gt;1.8.10)
+support this, this feature is disabled by default.
+' defval='0' depends='HAVE_DOT'/>
+ <option type='bool' id='GENERATE_LEGEND' docs='
+If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+generate a legend page explaining the meaning of the various boxes and
+arrows in the dot generated graphs.
+' defval='1' depends='HAVE_DOT'/>
+ <option type='bool' id='DOT_CLEANUP' docs='
+If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+remove the intermediate dot files that are used to generate
+the various graphs.
+' defval='1' depends='HAVE_DOT'/>
+ </group>
+ <group name='Search' docs='Options related to the search engine'>
+ <option type='bool' id='SEARCHENGINE' docs='
+The SEARCHENGINE tag specifies whether or not a search engine should be
+used. If set to NO the values of all tags below this one will be ignored.
+' defval='0'/>
+ <option type='obsolete' id='USE_WINDOWS_ENCODING'/>
+ <option type='obsolete' id='DETAILS_AT_TOP'/>
+ <option type='obsolete' id='QTHELP_FILE'/>
+ <option type='obsolete' id='QTHELP_CONFIG'/>
+ <option type='obsolete' id='DOXYGEN2QTHELP_LOC'/>
+ <option type='obsolete' id='MAX_DOT_GRAPH_WIDTH'/>
+ <option type='obsolete' id='MAX_DOT_GRAPH_HEIGHT'/>
+ <option type='obsolete' id='CGI_NAME'/>
+ <option type='obsolete' id='CGI_URL'/>
+ <option type='obsolete' id='DOC_URL'/>
+ <option type='obsolete' id='DOC_ABSPATH'/>
+ <option type='obsolete' id='BIN_ABSPATH'/>
+ <option type='obsolete' id='EXT_DOC_PATHS'/>
+ </group>
+</doxygenconfig>