diff options
Diffstat (limited to 'addon/doxywizard/doxywizard.cpp')
| -rw-r--r-- | addon/doxywizard/doxywizard.cpp | 1626 |
1 files changed, 403 insertions, 1223 deletions
diff --git a/addon/doxywizard/doxywizard.cpp b/addon/doxywizard/doxywizard.cpp index 160ba9c..6d88624 100644 --- a/addon/doxywizard/doxywizard.cpp +++ b/addon/doxywizard/doxywizard.cpp @@ -1,1415 +1,595 @@ -#include <qlabel.h> -#include <qhbox.h> -#include <qvbox.h> -#include <qlineedit.h> -#include <qapplication.h> -#include <qcheckbox.h> -#include <qpushbutton.h> -#include <qbuttongroup.h> -#include <qradiobutton.h> -#include <qlayout.h> -#include <qcombobox.h> -#include <qfiledialog.h> -#include <qmessagebox.h> -#include <qtextedit.h> -#include <qprocess.h> -#include <qtimer.h> -#include <qstatusbar.h> -#include <qfileinfo.h> -#include <qpopupmenu.h> -#include <qmenubar.h> -#include <qtooltip.h> - -#include <stdlib.h> - -#if defined(Q_OS_MACX) -#include <CoreFoundation/CFBundle.h> -#include <ApplicationServices/ApplicationServices.h> -#undef check -#endif - +#include <QtGui> #include "doxywizard.h" -#include "expert.h" -#include "config.h" #include "version.h" +#include "expert.h" +#include "wizard.h" const int messageTimeout = 5000; //!< status bar message timeout in millisec. -#if defined(Q_OS_MACX) -QCString getResourcePath() -{ - // todo: use qApp->applicationDirPath() - QCString result; - CFURLRef pluginRef = CFBundleCopyBundleURL(CFBundleGetMainBundle()); - CFStringRef macPath = CFURLCopyFileSystemPath(pluginRef, kCFURLPOSIXPathStyle); - result = CFStringGetCStringPtr(macPath, CFStringGetSystemEncoding()); - result+="/Contents/Resources/"; - return result; -} - -void setDotPath() -{ - // TODO: enable this if we ship dot with doxygen again... -// Config_getString("DOT_PATH")=getResourcePath(); -} - -bool setMscgenPath() -{ - if (Config_getString("MSCGEN_PATH")!=getResourcePath()) - { - Config_getString("MSCGEN_PATH")=getResourcePath(); - return TRUE; - } - return FALSE; -} +MainWindow &MainWindow::instance() +{ + static MainWindow theInstance; + return theInstance; +} + +MainWindow::MainWindow() + : m_settings(QString::fromAscii("Doxygen.org"), QString::fromAscii("Doxywizard")) +{ + QMenu *file = menuBar()->addMenu(tr("File")); + file->addAction(tr("Open..."), + this, SLOT(openConfig()), Qt::CTRL+Qt::Key_O); + m_recentMenu = file->addMenu(tr("Open recent")); + file->addAction(tr("Save"), + this, SLOT(saveConfig()), Qt::CTRL+Qt::Key_S); + file->addAction(tr("Save as..."), + this, SLOT(saveConfigAs()), Qt::SHIFT+Qt::CTRL+Qt::Key_S); + file->addAction(tr("Quit"), + this, SLOT(quit()), Qt::CTRL+Qt::Key_Q); + + QMenu *settings = menuBar()->addMenu(tr("Settings")); + settings->addAction(tr("Reset to factory defaults"), + this,SLOT(resetToDefaults())); + settings->addAction(tr("Use current settings at startup"), + this,SLOT(makeDefaults())); + + QMenu *help = menuBar()->addMenu(tr("Help")); + help->addAction(tr("Online manual"), + this, SLOT(manual()), Qt::Key_F1); + help->addAction(tr("About"), + this, SLOT(about()) ); + + m_expert = new Expert; + m_wizard = new Wizard(m_expert->modelData()); + + // ----------- top part ------------------ + QWidget *topPart = new QWidget; + QVBoxLayout *rowLayout = new QVBoxLayout(topPart); + + // select working directory + QHBoxLayout *dirLayout = new QHBoxLayout; + m_workingDir = new QLineEdit; + m_selWorkingDir = new QPushButton(tr("Select...")); + dirLayout->addWidget(m_workingDir); + dirLayout->addWidget(m_selWorkingDir); + + //------------- bottom part -------------- + QWidget *runTab = new QWidget; + QVBoxLayout *runTabLayout = new QVBoxLayout(runTab); + + // run doxygen + QHBoxLayout *runLayout = new QHBoxLayout; + m_run = new QPushButton(tr("Run doxygen")); + m_run->setEnabled(false); + m_runStatus = new QLabel(tr("Status: not running")); + m_saveLog = new QPushButton(tr("Save log...")); + m_saveLog->setEnabled(false); + QPushButton *showSettings = new QPushButton(tr("Show configuration")); + runLayout->addWidget(m_run); + runLayout->addWidget(m_runStatus); + runLayout->addStretch(1); + runLayout->addWidget(showSettings); + runLayout->addWidget(m_saveLog); + + // output produced by doxygen + runTabLayout->addLayout(runLayout); + runTabLayout->addWidget(new QLabel(tr("Output produced by doxygen"))); + QGridLayout *grid = new QGridLayout; + m_outputLog = new QTextEdit; + m_outputLog->setReadOnly(true); + m_outputLog->setFontFamily(QString::fromAscii("courier")); + m_outputLog->setMinimumWidth(600); + grid->addWidget(m_outputLog,0,0); + grid->setColumnStretch(0,1); + grid->setRowStretch(0,1); + QHBoxLayout *launchLayout = new QHBoxLayout; + m_launchHtml = new QPushButton(tr("Show HTML output")); + launchLayout->addWidget(m_launchHtml); +#if 0 + m_launchPdf = new QPushButton(tr("Show PDF output")); + launchLayout->addWidget(m_launchPdf); #endif + launchLayout->addStretch(1); + grid->addLayout(launchLayout,1,0); + runTabLayout->addLayout(grid); + QTabWidget *tabs = new QTabWidget; + tabs->addTab(m_wizard,tr("Wizard")); + tabs->addTab(m_expert,tr("Expert")); + tabs->addTab(runTab,tr("Run")); -//========================================================================== - -Step1::Step1(QWidget *parent) : QWidget(parent,"Step1") -{ - QVBoxLayout *layout = new QVBoxLayout(this); - layout->setMargin(4); - layout->setSpacing(8); - layout->addWidget(new QLabel( "Provide some information " - "about the project you are documenting",this)); - QWidget *w = new QWidget( this ); - QHBoxLayout *bl = new QHBoxLayout(w,10); - - QVBox *col1 = new QVBox( w ); - col1->setSpacing(8); - (new QLabel("Project name:",col1))->setAlignment(Qt::AlignRight|Qt::AlignVCenter); - (new QLabel("Project version or id:",col1))->setAlignment(Qt::AlignRight|Qt::AlignVCenter); - - QVBox *col2 = new QVBox( w ); - col2->setSpacing(8); - m_projName = new QLineEdit(col2); - m_projNumber = new QLineEdit(col2); + rowLayout->addWidget(new QLabel(tr("Step 1: Specify the working directory from which doxygen will run"))); + rowLayout->addLayout(dirLayout); + rowLayout->addWidget(new QLabel(tr("Step 2: Configure doxygen using the Wizard and/or Expert tab, then switch to the Run tab to generate the documentation"))); + rowLayout->addWidget(tabs); - bl->addWidget(col1); - bl->addWidget(col2); + setCentralWidget(topPart); + statusBar()->showMessage(tr("Welcome to Doxygen"),messageTimeout); + loadSettings(); - layout->addWidget(w); - - //--------------------------------------------------- - QFrame *f = new QFrame( this ); - f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); - layout->addWidget(f); - - layout->addWidget(new QLabel( "Specify the directory to " - "scan for source code", this)); - QHBox *row = new QHBox( this ); - row->setSpacing(10); - new QLabel("Source code directory:",row); - m_sourceDir = new QLineEdit(row); - m_srcSelectDir = new QPushButton("Select...",row); - layout->addWidget(row); - - m_recursive = new QCheckBox("Scan recursively",this); - m_recursive->setChecked(TRUE); - layout->addWidget(m_recursive); - - //--------------------------------------------------- - f = new QFrame( this ); - f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); - layout->addWidget(f); - - layout->addWidget(new QLabel( - "Specify the directory where doxygen should " - "put the generated documentation",this - )); - row = new QHBox( this ); - row->setSpacing(10); - new QLabel("Destination directory:",row); - m_destDir = new QLineEdit(row); - m_dstSelectDir = new QPushButton("Select...",row); - layout->addWidget(row); - layout->addStretch(1); - - connect(m_srcSelectDir,SIGNAL(clicked()), - this,SLOT(selectSourceDir())); - connect(m_dstSelectDir,SIGNAL(clicked()), - this,SLOT(selectDestinationDir())); -} - -void Step1::selectSourceDir() -{ - m_sourceDir->setText(QFileDialog::getExistingDirectory(m_sourceDir->text(),this)); -} - -void Step1::selectDestinationDir() -{ - m_destDir->setText(QFileDialog::getExistingDirectory(m_destDir->text(),this)); -} - -QString Step1::getProjectName() const -{ - return m_projName->text(); -} - -QString Step1::getProjectNumber() const -{ - return m_projNumber->text(); -} - -QString Step1::getSourceDir() const -{ - return m_sourceDir->text(); -} - -bool Step1::scanRecursively() const -{ - return m_recursive->isChecked(); -} - -QString Step1::getDestinationDir() const -{ - return m_destDir->text(); -} - -void Step1::setProjectName(const QString &name) -{ - m_projName->setText(name); -} - -void Step1::setProjectNumber(const QString &num) -{ - m_projNumber->setText(num); -} - -void Step1::setSourceDir(const QString &dir) -{ - m_sourceDir->setText(dir); -} - -void Step1::setRecursiveScan(bool enable) -{ - m_recursive->setChecked(enable); -} - -void Step1::setDestinationDir(const QString &dir) -{ - m_destDir->setText(dir); -} - - -//========================================================================== - -Step2::Step2(QWidget *parent) : QWidget(parent,"Step2") -{ - QVBoxLayout *layout = new QVBoxLayout(this); - layout->setSpacing(8); - - m_extractMode = new QButtonGroup("Select the desired extraction mode:",this); - QGridLayout *gbox = new QGridLayout( m_extractMode, 4, 1, 8, 0 ); - gbox->addRowSpacing( 0, fontMetrics().lineSpacing()+2 ); - gbox->addWidget(new QRadioButton("Documented entities only",m_extractMode),1,0); - gbox->addWidget(new QRadioButton("All entities",m_extractMode),2,0); - gbox->addWidget(m_crossRef = new QCheckBox("Include cross-referenced source code in the output",m_extractMode),3,0); - m_extractMode->setButton(0); - layout->addWidget(m_extractMode); - - //--------------------------------------------------- - QFrame *f = new QFrame( this ); - f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); - layout->addWidget(f); - - m_optimizeLang = new QButtonGroup("Select programming language to optimize the results for",this); - gbox = new QGridLayout( m_optimizeLang, 5, 1, 8, 0 ); - gbox->addRowSpacing( 0, fontMetrics().lineSpacing()+2 ); - gbox->addWidget(new QRadioButton("Optimize for C++ output",m_optimizeLang),1,0); - gbox->addWidget(new QRadioButton("Optimize for Java output",m_optimizeLang),2,0); - gbox->addWidget(new QRadioButton("Optimize for C output",m_optimizeLang),3,0); - gbox->addWidget(new QRadioButton("Optimize for C# output",m_optimizeLang),4,0); - m_optimizeLang->setButton(0); - layout->addWidget(m_optimizeLang); - - layout->addStretch(1); -} + m_runProcess = new QProcess; + m_running = false; + m_timer = new QTimer; + updateLaunchButtonState(); + m_modified = false; + updateTitle(); -bool Step2::crossReferencingEnabled() const -{ - //printf("Step2::crossReferencingEnabled()=%d\n",m_crossRef->isOn()); - return m_crossRef->isOn(); + // connect signals and slots + connect(tabs,SIGNAL(currentChanged(int)),SLOT(selectTab(int))); + connect(m_selWorkingDir,SIGNAL(clicked()),SLOT(selectWorkingDir())); + connect(m_recentMenu,SIGNAL(triggered(QAction*)),SLOT(openRecent(QAction*))); + connect(m_workingDir,SIGNAL(returnPressed()),SLOT(updateWorkingDir())); + connect(m_runProcess,SIGNAL(readyReadStandardOutput()),SLOT(readStdout())); + connect(m_runProcess,SIGNAL(finished(int, QProcess::ExitStatus)),SLOT(runComplete())); + connect(m_timer,SIGNAL(timeout()),SLOT(readStdout())); + connect(m_run,SIGNAL(clicked()),SLOT(runDoxygen())); + connect(m_launchHtml,SIGNAL(clicked()),SLOT(showHtmlOutput())); + connect(m_saveLog,SIGNAL(clicked()),SLOT(saveLog())); + connect(showSettings,SIGNAL(clicked()),SLOT(showSettings())); + connect(m_expert,SIGNAL(changed()),SLOT(configChanged())); } -void Step2::enableCrossReferencing() +void MainWindow::closeEvent(QCloseEvent *event) { - //printf("Step2::enableCrossReferencing()\n"); - m_crossRef->setChecked(TRUE); + if (discardUnsavedChanges()) + { + saveSettings(); + event->accept(); + } + else + { + event->ignore(); + } } -bool Step2::extractAll() const +void MainWindow::quit() { - //printf("Step2::extractAll()=%d\n",m_extractMode->find(1)->isOn()); - return m_extractMode->find(1)->isOn(); + if (discardUnsavedChanges()) + { + saveSettings(); + } + QApplication::exit(0); } -bool Step2::crossReferencing() const +void MainWindow::setWorkingDir(const QString &dirName) { - return m_crossRef->isChecked(); + QDir::setCurrent(dirName); + m_workingDir->setText(dirName); + m_run->setEnabled(!dirName.isEmpty()); } -OptLang Step2::optimizeFor() const +void MainWindow::selectWorkingDir() { - switch (m_optimizeLang->selectedId()) + QString dirName = QFileDialog::getExistingDirectory(this, + tr("Select working directory"),m_workingDir->text()); + if (!dirName.isEmpty()) { - case 0: return Lang_Cpp; - case 1: return Lang_Java; - case 2: return Lang_C; - case 3: return Lang_CS; + setWorkingDir(dirName); } - return Lang_Cpp; -} - -void Step2::setExtractAll(bool enable) -{ - //printf("Step2::setExtractAll(%d)\n",enable); - m_extractMode->setButton(enable?1:0); } -void Step2::setCrossReferencing(bool enable) +void MainWindow::updateWorkingDir() { - //printf("Step2::setCrossReferencing(%d)\n",enable); - m_crossRef->setChecked(enable); + setWorkingDir(m_workingDir->text()); } -void Step2::setOptimizeFor(OptLang lang) +void MainWindow::manual() { - switch (lang) - { - case Lang_Cpp: m_optimizeLang->setButton(0); break; - case Lang_Java: m_optimizeLang->setButton(1); break; - case Lang_C: m_optimizeLang->setButton(2); break; - case Lang_CS: m_optimizeLang->setButton(3); break; - } + QDesktopServices::openUrl(QUrl(QString::fromAscii("http://www.doxygen.org/manual.html"))); } -//========================================================================== - -Step3::Step3(QWidget *parent) : QWidget(parent,"Step3") +void MainWindow::about() { - QVBoxLayout *layout = new QVBoxLayout(this); - QButtonGroup *bg = new QButtonGroup("Output format(s) to generate",this); - QGridLayout *gbox = new QGridLayout( bg, 8, 1, 8, 0 ); - gbox->addRowSpacing( 0, fontMetrics().lineSpacing()+2 ); - gbox->addWidget(m_htmlEnabled=new QCheckBox("HTML",bg),1,0); - QWidget *w = new QWidget(bg); - QHBoxLayout *bl = new QHBoxLayout(w); - m_htmlOptions = new QButtonGroup(w); - m_htmlOptions->hide(); - m_htmlOptionBox = new QVBox(w); - m_htmlOptions->insert(new QRadioButton("plain HTML",m_htmlOptionBox)); - m_htmlOptions->insert(new QRadioButton("with frames and a navigation tree",m_htmlOptionBox)); - m_htmlOptions->insert(new QRadioButton("prepare for compressed HTML (.chm)",m_htmlOptionBox)); - m_htmlOptions->insert(m_searchEnabled=new QCheckBox("With search function (requires PHP enabled web server)",m_htmlOptionBox)); - bl->addSpacing(30); - bl->addWidget(m_htmlOptionBox); - m_htmlOptions->setButton(0); - m_htmlOptionBox->setEnabled(TRUE); - gbox->addWidget(w,2,0); - - gbox->addWidget(m_latexEnabled=new QCheckBox("LaTeX",bg),3,0); - w = new QWidget(bg); - bl = new QHBoxLayout(w); - m_texOptions = new QButtonGroup(w); - m_texOptions->hide(); - m_texOptionBox = new QVBox(w); - m_texOptions->insert(new QRadioButton("as intermediate format for hyperlinked PDF",m_texOptionBox)); - m_texOptions->insert(new QRadioButton("as intermediate format for PDF",m_texOptionBox)); - m_texOptions->insert(new QRadioButton("as intermediate format for PostScript",m_texOptionBox)); - bl->addSpacing(30); - bl->addWidget(m_texOptionBox); - m_texOptions->setButton(0); - m_texOptionBox->setEnabled(FALSE); - gbox->addWidget(w,4,0); - - gbox->addWidget(m_manEnabled=new QCheckBox("Man pages",bg),5,0); - gbox->addWidget(m_rtfEnabled=new QCheckBox("Rich Text Format (RTF)",bg),6,0); - gbox->addWidget(m_xmlEnabled=new QCheckBox("XML",bg),7,0); - bg->setButton(0); - layout->addWidget(bg); - - layout->addStretch(1); - - connect(m_latexEnabled,SIGNAL(stateChanged(int)), - this,SLOT(latexStateChange(int))); - connect(m_htmlEnabled,SIGNAL(stateChanged(int)), - this,SLOT(htmlStateChange(int))); + QString msg; + QTextStream t(&msg,QIODevice::WriteOnly); + t << QString::fromAscii("<qt><center>A tool to configure and run doxygen version ")+ + QString::fromAscii(versionString)+ + QString::fromAscii(" on your source files.</center><p><br>" + "<center>Written by<br> Dimitri van Heesch<br>© 2000-2008</center><p>" + "</qt>"); + QMessageBox::about(this,tr("Doxygen GUI"),msg); } -void Step3::latexStateChange(int state) +void MainWindow::openConfig() { - if (state==QButton::On) - { - m_texOptionBox->setEnabled(TRUE); - } - else if (state==QButton::Off) + if (discardUnsavedChanges(false)) { - m_texOptionBox->setEnabled(FALSE); + QString fn = QFileDialog::getOpenFileName(this, + tr("Open configuration file"), + m_workingDir->text()); + if (!fn.isEmpty()) + { + loadConfigFromFile(fn); + } } } -void Step3::htmlStateChange(int state) +void MainWindow::updateConfigFileName(const QString &fileName) { - if (state==QButton::On) - { - m_htmlOptionBox->setEnabled(TRUE); - } - else if (state==QButton::Off) + if (m_fileName!=fileName) { - m_htmlOptionBox->setEnabled(FALSE); + m_fileName = fileName; + QString curPath = QFileInfo(fileName).path(); + setWorkingDir(curPath); + addRecentFile(fileName); + updateTitle(); } } -bool Step3::htmlEnabled() const -{ - return m_htmlEnabled->isChecked(); -} - -bool Step3::latexEnabled() const +void MainWindow::loadConfigFromFile(const QString & fileName) { - return m_latexEnabled->isChecked(); + m_expert->loadConfig(fileName); + m_wizard->refresh(); + updateConfigFileName(fileName); + updateLaunchButtonState(); + m_modified = false; + updateTitle(); } -bool Step3::manEnabled() const +void MainWindow::saveConfig(const QString &fileName) { - return m_manEnabled->isChecked(); + if (fileName.isEmpty()) return; + QFile f(fileName); + if (!f.open(QIODevice::WriteOnly)) return; + QTextStream t(&f); + m_expert->writeConfig(t,false); + updateConfigFileName(fileName); + m_modified = false; + updateTitle(); } -bool Step3::rtfEnabled() const +bool MainWindow::saveConfig() { - return m_rtfEnabled->isChecked(); -} - -bool Step3::xmlEnabled() const -{ - return m_xmlEnabled->isChecked(); -} - -bool Step3::searchEnabled() const -{ - return m_searchEnabled->isChecked(); -} - -HtmlStyle Step3::htmlStyle() const -{ - if (m_htmlOptions->find(0)->isOn()) - { - return HS_Plain; - } - else if (m_htmlOptions->find(1)->isOn()) + if (m_fileName.isEmpty()) { - return HS_TreeView; + return saveConfigAs(); } - else if (m_htmlOptions->find(2)->isOn()) - { - return HS_CHM; - } - // broken radio button logic - return HS_Plain; -} - -TexStyle Step3::texStyle() const -{ - switch (m_texOptions->selectedId()) + else { - case 0: return TS_PDFHyper; - case 1: return TS_PDF; - case 2: return TS_PS; + saveConfig(m_fileName); + return true; } - return TS_PDFHyper; -} - -void Step3::setHtmlEnabled(bool enable) -{ - m_htmlEnabled->setChecked(enable); -} - -void Step3::setLatexEnabled(bool enable) -{ - m_latexEnabled->setChecked(enable); } -void Step3::setManEnabled(bool enable) +bool MainWindow::saveConfigAs() { - m_manEnabled->setChecked(enable); + QString fileName = QFileDialog::getSaveFileName(this, QString(), + m_workingDir->text()+QString::fromAscii("/Doxyfile")); + if (fileName.isEmpty()) return false; + saveConfig(fileName); + return true; } -void Step3::setRtfEnabled(bool enable) +void MainWindow::makeDefaults() { - m_rtfEnabled->setChecked(enable); -} - -void Step3::setXmlEnabled(bool enable) -{ - m_xmlEnabled->setChecked(enable); -} - -void Step3::setSearchEnabled(bool enable) -{ - m_searchEnabled->setChecked(enable); -} - -void Step3::setHtmlStyle(HtmlStyle style) -{ - switch(style) + if (QMessageBox::question(this,tr("Use current setting at startup?"), + tr("Do you want to save the current settings " + "and use them next time Doxywizard starts?"), + QMessageBox::Save| + QMessageBox::Cancel)==QMessageBox::Save) { - case HS_Plain: m_htmlOptions->setButton(0); break; - case HS_TreeView: m_htmlOptions->setButton(1); break; - case HS_CHM: m_htmlOptions->setButton(2); break; + //printf("MainWindow:makeDefaults()\n"); + m_expert->saveSettings(&m_settings); + m_settings.setValue(QString::fromAscii("wizard/loadsettings"), true); } } -void Step3::setTexStyle(TexStyle style) +void MainWindow::resetToDefaults() { - switch(style) + if (QMessageBox::question(this,tr("Reset settings to their default values?"), + tr("Do you want to revert all settings back " + "to their original values?"), + QMessageBox::Reset| + QMessageBox::Cancel)==QMessageBox::Reset) { - case TS_PDFHyper: m_texOptions->setButton(0); break; - case TS_PDF: m_texOptions->setButton(1); break; - case TS_PS: m_texOptions->setButton(2); break; + //printf("MainWindow:resetToDefaults()\n"); + m_expert->resetToDefaults(); + m_settings.setValue(QString::fromAscii("wizard/loadsettings"), false); + m_wizard->refresh(); } } - -//========================================================================== - -Step4::Step4(QWidget *parent) : QWidget(parent,"Step4") +void MainWindow::loadSettings() { - QVBoxLayout *layout = new QVBoxLayout(this); - m_diagramMode = new QButtonGroup("Diagrams to generate",this); - QGridLayout *gbox = new QGridLayout( m_diagramMode, 5, 1, 8, 0 ); - gbox->addRowSpacing( 0, fontMetrics().lineSpacing()+2 ); - gbox->addWidget(new QRadioButton("No diagrams",m_diagramMode),1,0); - gbox->addWidget(new QRadioButton("Use built-in class diagram generator",m_diagramMode),2,0); - gbox->addWidget(new QRadioButton("Use dot tool from the GraphViz package to generate",m_diagramMode),3,0); - QWidget *w = new QWidget(m_diagramMode); - QHBoxLayout *bl = new QHBoxLayout(w); - QButtonGroup *dotGroup = new QButtonGroup(w); - dotGroup->hide(); - m_dotOptions = new QVBox(w); - dotGroup->insert(m_dotClass=new QCheckBox("Class diagrams",m_dotOptions)); - dotGroup->insert(m_dotCollaboration=new QCheckBox("Collaboration diagrams",m_dotOptions)); - dotGroup->insert(m_dotInclude=new QCheckBox("Include dependency graphs",m_dotOptions)); - dotGroup->insert(m_dotIncludedBy=new QCheckBox("Included by dependency graphs",m_dotOptions)); - dotGroup->insert(m_dotInheritance=new QCheckBox("Overall Class hierarchy",m_dotOptions)); - dotGroup->insert(m_dotCall=new QCheckBox("Call graphs",m_dotOptions)); - bl->addSpacing(30); - bl->addWidget(m_dotOptions); - dotGroup->setButton(0); - m_dotOptions->setEnabled(FALSE); - gbox->addWidget(w,4,0); + QVariant geometry = m_settings.value(QString::fromAscii("main/geometry"), QVariant::Invalid); + QVariant state = m_settings.value(QString::fromAscii("main/state"), QVariant::Invalid); + QVariant expState = m_settings.value(QString::fromAscii("expert/state"), QVariant::Invalid); + QVariant expState2 = m_settings.value(QString::fromAscii("expert/state2"), QVariant::Invalid); + QVariant wizState = m_settings.value(QString::fromAscii("wizard/state"), QVariant::Invalid); + QVariant loadSettings = m_settings.value(QString::fromAscii("wizard/loadsettings"), QVariant::Invalid); + //QVariant workingDir = m_settings.value(QString::fromAscii("main/defdir"), QVariant::Invalid); -//#if defined(Q_OS_MACX) // we bundle dot with the mac package -// m_diagramMode->setButton(2); -//#else - m_diagramMode->setButton(1); -//#endif - layout->addWidget(m_diagramMode); - layout->addStretch(1); - - connect(m_diagramMode,SIGNAL(clicked(int)), - this,SLOT(diagramModeChanged(int))); - //connect(m_dotCall,SIGNAL(stateChanged(int)), - // parent,SLOT(changeCallGraphState(int))); -} - -void Step4::diagramModeChanged(int buttonId) -{ - m_dotOptions->setEnabled(buttonId==2); -} - -//void Step4::disableCallGraphs() -//{ -// m_dotCall->setChecked(FALSE); -//} - -//bool Step4::callGraphEnabled() const -//{ -// return m_dotCall->isOn(); -//} - -DiagramMode Step4::diagramMode() const -{ - switch(m_diagramMode->selectedId()) + if (geometry !=QVariant::Invalid) restoreGeometry(geometry.toByteArray()); + if (state !=QVariant::Invalid) restoreState (state.toByteArray()); + if (expState !=QVariant::Invalid) m_expert->restoreState(expState.toByteArray()); + if (expState2 !=QVariant::Invalid) m_expert->restoreInnerState(expState2.toByteArray()); + if (wizState !=QVariant::Invalid) m_wizard->restoreState(wizState.toByteArray()); + //if (workingDir!=QVariant::Invalid) + //{ + // QString dir = workingDir.toString(); + // m_workingDir->setText(dir); + // QDir::setCurrent(dir); + // m_run->setEnabled(!dir.isEmpty()); + //} + if (loadSettings!=QVariant::Invalid && loadSettings.toBool()) { - case 0: return DM_None; - case 1: return DM_Builtin; - case 2: return DM_Dot; + m_expert->loadSettings(&m_settings); } - return DM_None; -} -bool Step4::classDiagram() const -{ - return m_dotClass->isChecked(); -} - -bool Step4::collaborationDiagram() const -{ - return m_dotCollaboration->isChecked(); -} - -bool Step4::includeGraph() const -{ - return m_dotInclude->isChecked(); -} - -bool Step4::includedByGraph() const -{ - return m_dotIncludedBy->isChecked(); -} - -bool Step4::inheritanceGraph() const -{ - return m_dotInheritance->isChecked(); -} - -bool Step4::callGraph() const -{ - return m_dotCall->isChecked(); -} - -void Step4::setDiagramMode(DiagramMode mode) -{ - switch(mode) + for (int i=0;i<10;i++) { - case DM_None: m_diagramMode->setButton(0); diagramModeChanged(0); break; - case DM_Builtin: m_diagramMode->setButton(1); diagramModeChanged(1); break; - case DM_Dot: m_diagramMode->setButton(2); diagramModeChanged(2); break; + QString entry = m_settings.value(QString().sprintf("recent/config%d",i)).toString(); + if (!entry.isEmpty()) addRecentFile(entry); } -} -void Step4::setClassDiagram(bool enable) -{ - m_dotClass->setChecked(enable); -} - -void Step4::setCollaborationDiagram(bool enable) -{ - m_dotCollaboration->setChecked(enable); } -void Step4::setIncludeGraph(bool enable) +void MainWindow::saveSettings() { - m_dotInclude->setChecked(enable); -} + QSettings settings(QString::fromAscii("Doxygen.org"), QString::fromAscii("Doxywizard")); -void Step4::setIncludedByGraph(bool enable) -{ - m_dotIncludedBy->setChecked(enable); + m_settings.setValue(QString::fromAscii("main/geometry"), saveGeometry()); + m_settings.setValue(QString::fromAscii("main/state"), saveState()); + m_settings.setValue(QString::fromAscii("expert/state"), m_expert->saveState()); + m_settings.setValue(QString::fromAscii("expert/state2"), m_expert->saveInnerState()); + m_settings.setValue(QString::fromAscii("wizard/state"), m_wizard->saveState()); } -void Step4::setInheritanceGraph(bool enable) +void MainWindow::selectTab(int id) { - m_dotInheritance->setChecked(enable); + if (id==0) m_wizard->refresh(); } -void Step4::setCallGraph(bool enable) +void MainWindow::addRecentFile(const QString &fileName) { - m_dotCall->setChecked(enable); -} - - -//========================================================================== - -Wizard::Wizard(QWidget *parent=0) : QTabDialog(parent) -{ - addTab( m_step1 = new Step1(this),"Project"); - addTab( m_step2 = new Step2(this),"Mode"); - addTab( m_step3 = new Step3(this),"Output"); - addTab( m_step4 = new Step4(this),"Diagrams"); - setCancelButton(); -} - -//========================================================================== - -MainWidget::MainWidget(QWidget *parent) - : QMainWindow(parent,"MainWidget") -{ - setCaption("Doxygen GUI frontend"); - - // initialize config settings - Config::instance()->init(); - Config::instance()->check(); - Config_getBool("HAVE_DOT")=TRUE; -#if defined(Q_OS_MACX) - setDotPath(); - setMscgenPath(); -#endif + int i=m_recentFiles.indexOf(fileName); + if (i!=-1) m_recentFiles.removeAt(i); - QWidget *w = new QWidget(this); - setCentralWidget(w); - QVBoxLayout *layout = new QVBoxLayout(w); - layout->setMargin(10); - - QPopupMenu *file = new QPopupMenu(this); - file->insertItem("Open...", this, SLOT(loadConfigFile()), CTRL+Key_O); - file->insertItem("Save As...", this, SLOT(saveConfigFile()), CTRL+Key_S); - m_recentMenu = new QPopupMenu; - file->insertItem( "&Recent configurations", m_recentMenu ); - connect(m_recentMenu,SIGNAL(activated(int)),this,SLOT(openRecent(int))); - file->insertItem("Set as default...",this,SLOT(saveDefaults()) ); - file->insertItem("Reset...",this,SLOT(resetConfig()) ); - file->insertItem("Quit", this, SLOT(quit()), CTRL+Key_Q); - QPopupMenu *help = new QPopupMenu(this); -#if defined(Q_OS_MACX) - help->insertItem("Online manual", this, SLOT(manual()), Key_F1); -#endif - help->insertItem("About", this, SLOT(about()) ); - menuBar()->insertItem("File",file); - menuBar()->insertItem("Help",help); - - //--------------------------------------------------- - QVBox *heading = new QVBox(w); - QLabel *l = new QLabel("Step 1: Configure doxygen",heading); - QFrame *f = new QFrame( heading ); - f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); - //f->setFixedSize(l->sizeHint().width(),f->sizeHint().height()); - layout->addWidget(heading); - layout->addSpacing(10); - - l = new QLabel("Choose one of the following ways to configure doxygen",w); - layout->addWidget(l); - layout->addSpacing(5); - QHBoxLayout *hbl = new QHBoxLayout(layout); - hbl->setSpacing(8); - - m_wizard = new QPushButton("Wizard...",w); - QToolTip::add(m_wizard,"Quickly configure the most important settings"); - hbl->addWidget(m_wizard); - - m_expert = new QPushButton("Expert...",w); - QToolTip::add(m_expert,"Determine all configuration settings in detail"); - hbl->addWidget(m_expert); - - m_load = new QPushButton("Load...",w); - QToolTip::add(m_load,"Load the configuration settings from file"); - hbl->addWidget(m_load); - - hbl->addStretch(1); - - //--------------------------------------------------- - heading = new QVBox(w); - l = new QLabel("Step 2: Save the configuration file",heading); - f = new QFrame( heading ); - f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); - //f->setFixedSize(l->sizeHint().width(),f->sizeHint().height()); - layout->addSpacing(15); - layout->addWidget(heading); - layout->addSpacing(5); - - QGridLayout *grid = new QGridLayout(layout,1,2,10); - m_save = new QPushButton("Save...",w); - m_save->setFixedSize(m_save->sizeHint()); - grid->addWidget(m_save,0,0); - grid->addWidget(m_saveStatus=new QLabel(w),0,1); - m_saveStatus->setTextFormat(Qt::RichText); - - //--------------------------------------------------- - heading = new QVBox(w); - l = new QLabel("Step 3: Specify the directory from which to run doxygen",heading); - f = new QFrame( heading ); - f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); - //f->setFixedSize(l->sizeHint().width(),f->sizeHint().height()); - layout->addSpacing(15); - layout->addWidget(heading); - layout->addSpacing(5); - - QHBoxLayout *row = new QHBoxLayout( layout ); - row->setSpacing(10); - row->addWidget(new QLabel("Working directory:",w)); - m_workingDir = new QLineEdit(w); - m_selWorkingDir = new QPushButton("Select...",w); - row->addWidget(m_workingDir,1); - row->addWidget(m_selWorkingDir); - - //--------------------------------------------------- - heading = new QVBox(w); - l = new QLabel("Step 4: Run doxygen",heading); - f = new QFrame( heading ); - f->setFrameStyle( QFrame::HLine | QFrame::Sunken ); - //f->setFixedSize(l->sizeHint().width(),f->sizeHint().height()); - layout->addSpacing(15); - layout->addWidget(heading); - layout->addSpacing(5); - - row = new QHBoxLayout( layout ); - row->setSpacing(10); - m_run = new QPushButton("Start",w); - row->addWidget(m_run); - row->addWidget(m_runStatus = new QLabel("Status: not running",w)); - row->addStretch(1); - m_run->setEnabled(FALSE); - m_runStatus->setEnabled(FALSE); - - m_saveLog = new QPushButton("Save log...",w); - m_saveLog->setEnabled(FALSE); - row->addWidget(m_saveLog); - - layout->addSpacing(8); - layout->addWidget(m_outputHeading=new QLabel("Output produced by doxygen",w)); - grid = new QGridLayout(layout,1,1,3); - m_outputLog = new QTextEdit(w); - m_outputLog->setReadOnly(TRUE); - m_outputLog->setMinimumWidth(600); - grid->addWidget(m_outputLog,0,0); - grid->setColStretch(0,1); - grid->setRowStretch(0,1); - m_outputLog->setEnabled(FALSE); - m_outputHeading->setEnabled(FALSE); - - // make connections - connect(m_wizard,SIGNAL(clicked()), - this,SLOT(launchWizard())); - connect(m_expert,SIGNAL(clicked()), - this,SLOT(launchExpert())); - connect(m_load,SIGNAL(clicked()), - this,SLOT(loadConfigFile())); - connect(m_save,SIGNAL(clicked()), - this,SLOT(saveConfigFile())); - connect(m_selWorkingDir,SIGNAL(clicked()), - this,SLOT(selectWorkingDir())); - connect(m_workingDir,SIGNAL(textChanged(const QString&)), - this,SLOT(updateRunnable(const QString&))); - connect(m_run,SIGNAL(clicked()), - this,SLOT(runDoxygen())); - connect(m_saveLog,SIGNAL(clicked()), - this,SLOT(saveLog())); - - // load default settings - m_settings.setPath("www.doxygen.org","Doxygen GUI"); - bool ok; - QString config = m_settings.readEntry("/doxywizard/config/default",QString::null,&ok); - if (ok && !config.isEmpty()) + // not found + if (m_recentFiles.count() < 10) // append { - Config::instance()->parseString("default settings",config); + m_recentFiles.prepend(fileName); } - QString workingDir = m_settings.readEntry("/doxywizard/config/workingdir",QString::null,&ok); - if (ok && !workingDir.isEmpty()) + else // add + drop last item { - m_workingDir->setText(workingDir); + m_recentFiles.removeLast(); + m_recentFiles.prepend(fileName); } - setConfigSaved(FALSE); - for (int i=0;i<10;i++) + m_recentMenu->clear(); + i=0; + foreach( QString str, m_recentFiles ) { - QString entry = m_settings.readEntry(QString().sprintf("/doxywizard/recent/config%d",i)); - if (!entry.isEmpty()) - { - addRecentFile(entry); - } + m_recentMenu->addAction(str); + m_settings.setValue(QString().sprintf("recent/config%d",i++),str); } - - m_runProcess = new QProcess; - connect(m_runProcess,SIGNAL(readyReadStdout()),this,SLOT(readStdout())); - connect(m_runProcess,SIGNAL(processExited()),this,SLOT(runComplete())); - m_running = FALSE; - m_timer = new QTimer; - connect(m_timer,SIGNAL(timeout()),this,SLOT(readStdout())); - - statusBar()->message("Welcome to Doxygen",messageTimeout); -} - -MainWidget::~MainWidget() -{ - delete m_runProcess; } -void MainWidget::selectWorkingDir() +void MainWindow::openRecent(QAction *action) { - QString selectedDir = QFileDialog::getExistingDirectory(m_workingDir->text()); - if (!selectedDir.isEmpty()) + if (discardUnsavedChanges(false)) { - m_workingDir->setText(selectedDir); + loadConfigFromFile(action->text()); } } -void MainWidget::updateRunnable(const QString &newDirName) -{ - if (m_running) return; - QFileInfo fi(newDirName); - bool isRunnable = fi.exists() && fi.isDir() && m_configSaved; - m_run->setEnabled(isRunnable); - m_runStatus->setEnabled(isRunnable); - m_outputHeading->setEnabled(isRunnable); - m_outputLog->setEnabled(isRunnable); - m_saveLog->setEnabled(isRunnable && !m_outputLog->text().isEmpty()); -} - -void MainWidget::launchWizard() +void MainWindow::runDoxygen() { - Wizard wizard(this); - - // -------- Initialize the dialog ---------------- - - // step1 - wizard.setProjectName(QString::fromLocal8Bit(Config_getString("PROJECT_NAME"))); - wizard.setProjectNumber(QString::fromLocal8Bit(Config_getString("PROJECT_NUMBER"))); - if (Config_getList("INPUT").count()>0) - { - QString dirName=Config_getList("INPUT").getFirst(); - QFileInfo fi(dirName); - if (fi.exists() && fi.isDir()) - { - wizard.setSourceDir(dirName); - } - } - wizard.setRecursiveScan(Config_getBool("RECURSIVE")); - wizard.setDestinationDir(QString::fromLocal8Bit(Config_getString("OUTPUT_DIRECTORY"))); - - // step2 - wizard.setExtractAll(Config_getBool("EXTRACT_ALL")); - wizard.setCrossReferencing(Config_getBool("SOURCE_BROWSER")); - if (Config_getBool("OPTIMIZE_OUTPUT_JAVA")) - { - wizard.setOptimizeFor(Lang_Java); - } - else if (Config_getBool("OPTIMIZE_OUTPUT_FOR_C")) - { - wizard.setOptimizeFor(Lang_C); - } - else - { - wizard.setOptimizeFor(Lang_Cpp); - } - - // step3 - wizard.setHtmlEnabled(Config_getBool("GENERATE_HTML")); - wizard.setLatexEnabled(Config_getBool("GENERATE_LATEX")); - wizard.setManEnabled(Config_getBool("GENERATE_MAN")); - wizard.setRtfEnabled(Config_getBool("GENERATE_RTF")); - wizard.setXmlEnabled(Config_getBool("GENERATE_XML")); - wizard.setSearchEnabled(Config_getBool("SEARCHENGINE")); - if (Config_getBool("GENERATE_HTMLHELP")) - { - wizard.setHtmlStyle(HS_CHM); - } - else if (Config_getEnum("GENERATE_TREEVIEW")!="NONE") - { - wizard.setHtmlStyle(HS_TreeView); - } - else - { - wizard.setHtmlStyle(HS_Plain); - } - if (Config_getBool("USE_PDFLATEX")) - { - if (Config_getBool("PDF_HYPERLINKS")) - { - wizard.setTexStyle(TS_PDFHyper); - } - else - { - wizard.setTexStyle(TS_PDF); - } - } - else + if (!m_running) { - wizard.setTexStyle(TS_PS); - } + QString doxygenPath; +#if defined(Q_OS_MACX) + doxygenPath = qApp->applicationDirPath()+QString::fromAscii("/../Resources/"); + qDebug() << tr("Doxygen path: ") << doxygenPath; + if ( !QFile(doxygenPath + QString::fromAscii("doxygen")).exists() ) { + // No doygen binary in the resources, if there is a system doxygen binary, use that instead + if ( QFile(QString::fromAscii("/usr/local/bin/doxygen")).exists() ) + doxygenPath = QString::fromAscii("/usr/local/bin/"); + else { + qDebug() << tr("Can't find the doxygen command, make sure it's in your $$PATH"); + doxygenPath = QString::fromAscii(""); + } + } + qDebug() << tr("Getting doxygen from: ") << doxygenPath; +#endif - // step4 - if (Config_getBool("HAVE_DOT")) - { - wizard.setDiagramMode(DM_Dot); - } - else if (Config_getBool("CLASS_DIAGRAMS")) - { - wizard.setDiagramMode(DM_Builtin); - } - else - { - wizard.setDiagramMode(DM_None); - } - wizard.setClassDiagram(Config_getBool("CLASS_GRAPH")); - wizard.setCollaborationDiagram(Config_getBool("COLLABORATION_GRAPH")); - wizard.setIncludeGraph(Config_getBool("INCLUDE_GRAPH")); - wizard.setIncludedByGraph(Config_getBool("INCLUDED_BY_GRAPH")); - wizard.setInheritanceGraph(Config_getBool("GRAPHICAL_HIERARCHY")); - wizard.setCallGraph(Config_getBool("CALL_GRAPH")); - - // -------- Run the dialog ---------------- + m_runProcess->setReadChannel(QProcess::StandardOutput); + m_runProcess->setProcessChannelMode(QProcess::MergedChannels); + m_runProcess->setWorkingDirectory(m_workingDir->text()); + QStringList env=QProcess::systemEnvironment(); + // set PWD environment variable to m_workingDir + env.replaceInStrings(QRegExp(QString::fromAscii("^PWD=(.*)"),Qt::CaseInsensitive), + QString::fromAscii("PWD=")+m_workingDir->text()); + m_runProcess->setEnvironment(env); - if (wizard.exec()==QDialog::Accepted) - { - // -------- Store the results ---------------- + QStringList args; + args << QString::fromAscii("-b"); // make stdout unbuffered + args << QString::fromAscii("-"); // read config from stdin - // step1 - Config_getString("PROJECT_NAME")=wizard.getProjectName().local8Bit(); - Config_getString("PROJECT_NUMBER")=wizard.getProjectNumber(); - Config_getList("INPUT").clear(); - Config_getList("INPUT").append(wizard.getSourceDir()); - Config_getBool("RECURSIVE")=wizard.scanRecursively(); - Config_getString("OUTPUT_DIRECTORY")=wizard.getDestinationDir().local8Bit(); + m_outputLog->clear(); + m_runProcess->start(doxygenPath + QString::fromAscii("doxygen"), args); - // step2 - if (wizard.extractAll()) + if (!m_runProcess->waitForStarted()) { - Config_getBool("EXTRACT_ALL")=TRUE; - Config_getBool("EXTRACT_PRIVATE")=TRUE; - Config_getBool("EXTRACT_STATIC")=TRUE; - Config_getBool("EXTRACT_LOCAL_CLASSES")=TRUE; - Config_getBool("HIDE_UNDOC_MEMBERS")=FALSE; - Config_getBool("HIDE_UNDOC_CLASSES")=FALSE; - } - else - { - Config_getBool("EXTRACT_ALL")=FALSE; - Config_getBool("EXTRACT_PRIVATE")=FALSE; - Config_getBool("EXTRACT_STATIC")=FALSE; - Config_getBool("EXTRACT_LOCAL_CLASSES")=TRUE; - Config_getBool("HIDE_UNDOC_MEMBERS")=TRUE; - Config_getBool("HIDE_UNDOC_CLASSES")=TRUE; + m_outputLog->append(QString::fromAscii("*** Failed to run doxygen\n")); + return; } + QTextStream t(m_runProcess); + m_expert->writeConfig(t,false); + m_runProcess->closeWriteChannel(); - if (wizard.crossReferencing()) + if (m_runProcess->state() == QProcess::NotRunning) { - Config_getBool("SOURCE_BROWSER")=TRUE; - Config_getBool("REFERENCED_BY_RELATION")=TRUE; - Config_getBool("REFERENCES_RELATION")=TRUE; - Config_getBool("VERBATIM_HEADERS")=TRUE; + m_outputLog->append(QString::fromAscii("*** Failed to run doxygen\n")); } else { - Config_getBool("SOURCE_BROWSER")=FALSE; - Config_getBool("REFERENCED_BY_RELATION")=FALSE; - Config_getBool("REFERENCES_RELATION")=FALSE; - Config_getBool("VERBATIM_HEADERS")=FALSE; - } - - switch(wizard.optimizeFor()) - { - case Lang_Cpp: - Config_getBool("OPTIMIZE_OUTPUT_FOR_C")=FALSE; - Config_getBool("OPTIMIZE_OUTPUT_JAVA")=FALSE; - break; - case Lang_Java: - Config_getBool("OPTIMIZE_OUTPUT_FOR_C")=FALSE; - Config_getBool("OPTIMIZE_OUTPUT_JAVA")=TRUE; - break; - case Lang_C: - Config_getBool("OPTIMIZE_OUTPUT_FOR_C")=TRUE; - Config_getBool("OPTIMIZE_OUTPUT_JAVA")=FALSE; - break; - case Lang_CS: - Config_getBool("OPTIMIZE_OUTPUT_FOR_C")=FALSE; - Config_getBool("OPTIMIZE_OUTPUT_JAVA")=TRUE; - Config_getBool("EXTRACT_STATIC")=TRUE; - Config_getBool("EXTRACT_LOCAL_CLASSES")=TRUE; - break; - } - - // step3 - Config_getBool("GENERATE_HTML")=wizard.htmlEnabled(); - Config_getBool("GENERATE_LATEX")=wizard.latexEnabled(); - Config_getBool("GENERATE_MAN")=wizard.manEnabled(); - Config_getBool("GENERATE_RTF")=wizard.rtfEnabled(); - Config_getBool("GENERATE_XML")=wizard.xmlEnabled(); - Config_getBool("SEARCHENGINE")=wizard.searchEnabled(); - if (wizard.htmlEnabled()) - { - switch (wizard.htmlStyle()) - { - case HS_Plain: - Config_getBool("GENERATE_HTMLHELP")=FALSE; - Config_getEnum("GENERATE_TREEVIEW")="NONE"; - break; - case HS_TreeView: - Config_getBool("GENERATE_HTMLHELP")=FALSE; - Config_getEnum("GENERATE_TREEVIEW")="ALL"; - break; - case HS_CHM: - Config_getBool("GENERATE_HTMLHELP")=TRUE; - Config_getEnum("GENERATE_TREEVIEW")="NONE"; - break; - } - } - if (wizard.latexEnabled()) - { - switch (wizard.texStyle()) - { - case TS_PDFHyper: - Config_getBool("USE_PDFLATEX")=TRUE; - Config_getBool("PDF_HYPERLINKS")=TRUE; - break; - case TS_PDF: - Config_getBool("USE_PDFLATEX")=TRUE; - Config_getBool("PDF_HYPERLINKS")=FALSE; - break; - case TS_PS: - Config_getBool("USE_PDFLATEX")=FALSE; - Config_getBool("PDF_HYPERLINKS")=FALSE; - break; - } - } - - // step4 - switch (wizard.diagramMode()) - { - case DM_None: - Config_getBool("CLASS_DIAGRAMS")=FALSE; - Config_getBool("HAVE_DOT")=FALSE; - break; - case DM_Builtin: - Config_getBool("CLASS_DIAGRAMS")=TRUE; - Config_getBool("HAVE_DOT")=FALSE; - break; - case DM_Dot: - Config_getBool("CLASS_DIAGRAMS")=FALSE; - Config_getBool("HAVE_DOT")=TRUE; - Config_getBool("CLASS_GRAPH")=wizard.classDiagram(); - Config_getBool("COLLABORATION_GRAPH")=wizard.collaborationDiagram(); - Config_getBool("INCLUDE_GRAPH")=wizard.includeGraph(); - Config_getBool("INCLUDED_BY_GRAPH")=wizard.includedByGraph(); - Config_getBool("GRAPHICAL_HIERARCHY")=wizard.inheritanceGraph(); - Config_getBool("CALL_GRAPH")=wizard.callGraph(); - break; - } -#if defined(Q_OS_MACX) - if (Config_getString("DOT_PATH").isEmpty()) - { - setDotPath(); - } - if (Config_getString("MSCGEN_PATH").isEmpty()) - { - setMscgenPath(); + m_saveLog->setEnabled(false); + m_running=true; + m_run->setText(tr("Stop doxygen")); + m_runStatus->setText(tr("Status: running")); + m_timer->start(1000); } -#endif - setConfigSaved(FALSE); - } -} - -void MainWidget::loadConfigFromFile(const QString &fn) -{ - if (!Config::instance()->parse(fn)) - { - QMessageBox::warning(0,"Warning", - "Could not open or read config file "+fn+"!", - "abort" - ); } else { - Config::instance()->convertStrToVal(); -#if 0 //defined(Q_OS_MACX) - if (checkIfDotInstalled() && - qstricmp(Config_getString("DOT_PATH"),DOT_PATH)!=0 - ) - { - Config_getString("DOT_PATH")=DOT_PATH; - setConfigSaved(FALSE); - } - else - { - setConfigSaved(TRUE); - } -#else - setConfigSaved(TRUE); -#endif - addRecentFile(fn); - m_workingDir->setText(QFileInfo(fn).dirPath(TRUE)); - m_configFileName = fn; -#if defined(Q_OS_MACX) - //if (Config_getString("DOT_PATH").isEmpty()) - //{ - // setDotPath(); - // setConfigSaved(FALSE); - //} - if (Config_getString("MSCGEN_PATH").isEmpty()) - { - setMscgenPath(); - setConfigSaved(FALSE); - } -#endif - statusBar()->message("New configuration loaded",messageTimeout); + m_running=false; + m_run->setText(tr("Run doxygen")); + m_runStatus->setText(tr("Status: not running")); + m_runProcess->kill(); + m_timer->stop(); + //updateRunnable(m_workingDir->text()); } } -void MainWidget::loadConfigFile() +void MainWindow::readStdout() { - QString fn = QFileDialog::getOpenFileName(m_workingDir->text(),QString::null,this); - if (!fn.isEmpty()) + if (m_running) { - loadConfigFromFile(fn); - // set current dir to where the config file is located - QDir::setCurrent(QFileInfo(fn).dirPath(TRUE)); + QByteArray data = m_runProcess->readAllStandardOutput(); + QString text = QString::fromLocal8Bit(data); + if (!text.isEmpty()) + { + m_outputLog->append(text.trimmed()); + } } } -void MainWidget::launchExpert() -{ - Expert expert(this); - expert.init(); - expert.exec(); -//#if defined(Q_OS_MACX) -// setDotPath(); -//#endif - if (expert.hasChanged()) setConfigSaved(FALSE); -} - -void MainWidget::saveDefaults() +void MainWindow::runComplete() { - if (QMessageBox::question(this,"Store settings as defaults", - "Do you wish to use the " - "current configuration settings as the default settings?", - QMessageBox::Yes, QMessageBox::No)==QMessageBox::Yes) + if (m_running) { - QString newConfig; - QTextStream t(&newConfig,IO_WriteOnly); - Config::instance()->writeTemplate(t,TRUE,FALSE); - m_settings.writeEntry("/doxywizard/config/default",newConfig); - m_settings.writeEntry("/doxywizard/config/workingdir",m_workingDir->text()); - statusBar()->message("Current configuration saved as default",messageTimeout); + m_outputLog->append(tr("*** Doxygen has finished\n")); } -} - -void MainWidget::saveConfigFile() -{ - QString fn = QFileDialog::getSaveFileName(m_workingDir->text()+"/Doxyfile",QString::null,this); - if (!fn.isEmpty()) + else { - QFile f(fn); - if (f.exists() && QMessageBox::question(this, - "Overwrite file? -- Doxywizard", - "A file called "+fn+" already exists. Do you want to overwrite it?", - "&Yes","&no", - QString::null, 0, 1) - ) - { - statusBar()->message("Save request aborted",messageTimeout); - return; - } - if (f.open(IO_WriteOnly)) - { - QTextStream t(&f); - Config::instance()->writeTemplate(t,TRUE,FALSE); - m_configFileName = fn; - setConfigSaved(TRUE); - addRecentFile(fn); - statusBar()->message("Configuration saved",messageTimeout); - } - else - { - QMessageBox::warning(0,"Warning", - "Cannot open file "+fn+" for writing. Nothing saved!","ok"); - } + m_outputLog->append(tr("*** Cancelled by user\n")); } + m_outputLog->ensureCursorVisible(); + m_run->setText(tr("Run doxygen")); + m_runStatus->setText(tr("Status: not running")); + m_running=false; + updateLaunchButtonState(); + //updateRunnable(m_workingDir->text()); + m_saveLog->setEnabled(true); } -void MainWidget::resetConfig() +void MainWindow::updateLaunchButtonState() { - if (QMessageBox::question(this,"Reset settings to their defaults", - "Do you wish to reset the " - "current configuration settings to their factory defaults?", - QMessageBox::Yes, QMessageBox::No)==QMessageBox::Yes) - { - // initialize config settings - Config::instance()->init(); -#if defined(Q_OS_MACX) - setDotPath(); - setMscgenPath(); + m_launchHtml->setEnabled(m_expert->htmlOutputPresent(m_workingDir->text())); +#if 0 + m_launchPdf->setEnabled(m_expert->pdfOutputPresent(m_workingDir->text())); #endif - - m_configFileName = ""; - setConfigSaved(FALSE); - statusBar()->message("Configuration settings reset to their defaults",messageTimeout); - } } -void MainWidget::setConfigSaved(bool enable) +void MainWindow::showHtmlOutput() { - m_configSaved=enable; - if (m_configSaved) - { - m_saveStatus->setText("Status: saved"); - } - else - { - m_saveStatus->setText("Status: <font color=\"red\">not saved</font>"); - } - updateRunnable(m_workingDir->text()); + QString indexFile = m_expert->getHtmlOutputIndex(m_workingDir->text()); + QFileInfo fi(indexFile); + QString indexUrl(QString::fromAscii("file://")+fi.absoluteFilePath()); + QDesktopServices::openUrl(QUrl(indexUrl)); } -void MainWidget::runDoxygen() +void MainWindow::saveLog() { - if (!m_running) + QString fn = QFileDialog::getSaveFileName(this, tr("Save log file"), + m_workingDir->text()+ + QString::fromAscii("/doxygen_log.txt")); + if (!fn.isEmpty()) { - QString doxygenPath; -#if defined(Q_OS_MACX) - doxygenPath = getResourcePath(); -#else - // TODO: get the right value if not in the search path -#endif - //printf("Trying to run doxygen from path %s\n",doxygenPath.data()); - - m_runProcess->setCommunication(QProcess::Stdout| - QProcess::Stderr| - QProcess::DupStderr - ); - m_runProcess->setWorkingDirectory(QDir(m_workingDir->text())); - m_runProcess->clearArguments(); - m_runProcess->addArgument(doxygenPath+"doxygen"); - m_runProcess->addArgument("-b"); - m_runProcess->addArgument(m_configFileName); - m_outputLog->clear(); - if (!m_runProcess->start()) + QFile f(fn); + if (f.open(QIODevice::WriteOnly)) { - m_outputLog->append(QString("*** Failed to run doxygen\n")); + QTextStream t(&f); + t << m_outputLog->toPlainText(); + statusBar()->showMessage(tr("Output log saved"),messageTimeout); } else { - m_running=TRUE; - m_run->setText("Cancel"); - m_runStatus->setText("Status: running"); - m_timer->start(1000); + QMessageBox::warning(0,tr("Warning"), + tr("Cannot open file ")+fn+tr(" for writing. Nothing saved!"),tr("ok")); } } - else - { - m_running=FALSE; - m_run->setText("Start"); - m_runStatus->setText("Status: not running"); - m_runProcess->kill(); - m_timer->stop(); - updateRunnable(m_workingDir->text()); - } } -void MainWidget::readStdout() +void MainWindow::showSettings() { - m_outputLog->append(QString(m_runProcess->readStdout())); + QString text; + QTextStream t(&text); + m_expert->writeConfig(t,true); + m_outputLog->clear(); + m_outputLog->append(text); + m_outputLog->ensureCursorVisible(); + m_saveLog->setEnabled(true); } -void MainWidget::runComplete() +void MainWindow::configChanged() { - if (m_running) - { - m_outputLog->append(QString("*** Doxygen has finished\n")); - } - else - { - m_outputLog->append(QString("*** Cancelled by user\n")); - } - m_run->setText("Start"); - m_runStatus->setText("Status: not running"); - m_running=FALSE; - updateRunnable(m_workingDir->text()); -} - -void MainWidget::about() -{ - QString msg; - QTextStream t(&msg,IO_WriteOnly); - t << QString("<qt><center>A tool to configure and run doxygen version ")+versionString+ - " on your source files.</center><p><br>" - "<center>Written by<br> Dimitri van Heesch<br>© 2000-2008</center><p>" - "</qt>"; - QMessageBox::about(this,"Doxygen GUI",msg); + m_modified = true; + updateTitle(); } -void MainWidget::manual() +void MainWindow::updateTitle() { -#if defined(Q_OS_MACX) - const char *urlBytes = "http://www.doxygen.org/manual.html"; - CFURLRef url = CFURLCreateWithBytes ( - NULL, // allocator - (UInt8*)urlBytes, // bytes - strlen(urlBytes), // length - kCFStringEncodingASCII, // encoding - NULL // baseURL - ); - LSOpenCFURLRef(url,0); - CFRelease(url); -#endif -} - -void MainWidget::addRecentFile(const QString &file) -{ - QStringList::Iterator it = m_recentFiles.find(file); - if (it!=m_recentFiles.end()) - { - // already found => move to top - m_recentFiles.remove(it); - m_recentFiles.prepend(file); - } - else + QString title = tr("Doxygen GUI frontend"); + if (m_modified) { - // not found - if (m_recentFiles.count() < 10) // append - { - m_recentFiles.prepend(file); - } - else // add + drop last item - { - m_recentFiles.remove(m_recentFiles.last()); - m_recentFiles.prepend(file); - } + title+=QString::fromAscii(" +"); } - - m_recentMenu->clear(); - int i=0; - for ( it = m_recentFiles.begin(); it != m_recentFiles.end(); ++it, ++i ) + if (!m_fileName.isEmpty()) { - m_recentMenu->insertItem(*it); - m_settings.writeEntry(QString().sprintf("/doxywizard/recent/config%d",i),*it); + title+=QString::fromAscii(" (")+m_fileName+QString::fromAscii(")"); } + setWindowTitle(title); } - -void MainWidget::openRecent(int id) -{ - loadConfigFromFile(m_recentMenu->text(id)); -} - -void MainWidget::quit() -{ - if (!m_configSaved && - QMessageBox::warning( this, "DoxyWizard", "Quit and lose changes?", - QMessageBox::Yes, QMessageBox::No)==QMessageBox::No - ) return; // Quit cancelled by user - - qApp->quit(); -} - -void MainWidget::saveLog() +bool MainWindow::discardUnsavedChanges(bool saveOption) { - QString fn = QFileDialog::getSaveFileName(m_workingDir->text()+"/doxygen_log.txt",QString::null,this); - if (!fn.isEmpty()) + if (m_modified) { - QFile f(fn); - if (f.open(IO_WriteOnly)) + QMessageBox::StandardButton button; + if (saveOption) { - QTextStream t(&f); - t << m_outputLog->text(); - statusBar()->message("Output log saved",messageTimeout); + button = QMessageBox::question(this, + tr("Unsaved changes"), + tr("Unsaved changes will be lost! Do you want to save the configuration file?"), + QMessageBox::Save | + QMessageBox::Discard | + QMessageBox::Cancel + ); + if (button==QMessageBox::Save) + { + return saveConfig(); + } } else { - QMessageBox::warning(0,"Warning", - "Cannot open file "+fn+" for writing. Nothing saved!","ok"); + button = QMessageBox::question(this, + tr("Unsaved changes"), + tr("Unsaved changes will be lost! Do you want to continue?"), + QMessageBox::Discard | + QMessageBox::Cancel + ); } + return button==QMessageBox::Discard; } + return true; } -//========================================================================== +//----------------------------------------------------------------------- int main(int argc,char **argv) { QApplication a(argc,argv); - MainWidget main; + MainWindow &main = MainWindow::instance(); if (argc==2 && argv[1][0]!='-') // name of config file as an argument { - main.loadConfigFromFile(argv[1]); + main.loadConfigFromFile(QString::fromLocal8Bit(argv[1])); } else if (argc>1) { printf("Usage: %s [config file]\n",argv[0]); exit(1); } - a.setMainWidget(&main); main.show(); return a.exec(); } - |