path: root/doc/faq.doc

/******************************************************************************
 *
 * 
 *
 * Copyright (C) 1997-2003 by Dimitri van Heesch.
 *
 * Permission to use, copy, modify, and distribute this software and its
 * documentation under the terms of the GNU General Public License is hereby 
 * granted. No representations are made about the suitability of this software 
 * for any purpose. It is provided "as is" without express or implied warranty.
 * See the GNU General Public License for more details.
 *
 * Documents produced by Doxygen are derivative works derived from the
 * input used in their production; they are not affected by this license.
 *
 */
/*! \page faq Frequently Asked Questions

<ol>
<li><b>How to get information on the index page in HTML?</b>
<p>
You should use the \\mainpage command inside a comment block like this:
\verbatim
/*! \mainpage My Personal Index Page
 *
 * \section intro Introduction
 *
 * This is the introduction.
 *
 * \section install Installation
 *
 * \subsection step1 Step 1: Opening the box
 *  
 * etc...
 */
\endverbatim

<li><b>Help, some/all of the members of my class / file / namespace 
       are not documented?</b>

  Check the following:
  <ol>
  <li>Is your class / file / namespace documented? If not, it will not 
      be extracted from the sources unless \c EXTRACT_ALL is set to \c YES
      in the config file.
  <li>Are the members private? If so, you must set \c EXTRACT_PRIVATE to \c YES
      to make them appear in the documentation.
  <li>Is there a function macro in your class that does not end with a 
      semicolon (e.g. MY_MACRO())? If so then you have to instruct 
      doxygen's preprocessor to remove it.

      This typically boils down to the following settings in the config file:

      \verbatim
ENABLE_PREPROCESSING   = YES
MACRO_EXPANSION        = YES
EXPAND_ONLY_PREDEF     = YES
PREDEFINED             = MY_MACRO()=
      \endverbatim

      Please read the \ref preprocessing "preprocessing" section of the
      manual for more information.
  </ol> 

<li><b>When I set EXTRACT_ALL to NO none of my functions are shown in the 
    documentation.</b></li>

In order for global functions, variables, enums, typedefs, and defines 
to be documented you should document the file in which these commands are
located using a comment block containing a \\file (or \@file) 
command. 

Alternatively, you can put all members in a group (or module)
using the \\ingroup command and then document the group using a comment
block containing the \\defgroup command.

For member functions or functions that are part of a namespace you should
document either the class or namespace.
 
<li><b>How can I make doxygen ignore some code fragment?</b>
<p>
You can use Doxygen's preprocessor for this: 
If you put
\verbatim
#ifndef DOXYGEN_SHOULD_SKIP_THIS

 /* code that must be skipped by Doxygen */

#endif /* DOXYGEN_SHOULD_SKIP_THIS */
\endverbatim
around the blocks that should be hidden and put:
\verbatim
  PREDEFINED = DOXYGEN_SHOULD_SKIP_THIS
\endverbatim
in the config file then all blocks should be skipped by Doxygen as long
as <code>PREPROCESSING = YES</code>.

<li><b>How can I change what is after the <code>\#include</code> in the class documentation?</b>

You can document your class like

\verbatim
/*! \class MyClassName include.h path/include.h
 *
 *  Docs for MyClassName
 */
\endverbatim

To make doxygen put <br><br>
<code>
\#include \<path/include.h\>
</code>

in the documentation of the class MyClassName regardless of the name of the actual 
header file in which the definition of MyClassName is contained.

If you want doxygen to show that the include file should be included using
quotes instead of angle brackets you should type:
\verbatim
/*! \class MyClassName myhdr.h "path/myhdr.h"
 *
 *  Docs for MyClassName
 */
\endverbatim

<li><b>How can I use tag files in combination with compressed HTML?</b>

If you want to refer from one compressed HTML file 
\c a.chm to another compressed HTML file 
called \c b.chm, the
link in \c a.chm must have the following format:
\verbatim
<a href="b.chm::/file.html">
\endverbatim
Unfortunately this only works if both compressed HTML files are in the same 
directory.

As a result you must rename the generated \c index.chm files for all projects
into something unique and put all <code>.chm</code> files in one directory.

Suppose you have a project \e a referring to a project \e b using tag file
\c b.tag, then you could rename the \c index.chm for project \e a into
\c a.chm and the \c index.chm for project \e b into \c b.chm. In the 
configuration file for project \e a you write:
\verbatim
TAGFILES = b.tag=b.chm::
\endverbatim
or you can use \c installdox to set the links as follows:
\verbatim
installdox -lb.tag@b.chm::
\endverbatim

<li><b>I don't like the quick index that is put above each HTML page, what do I do?</b>

You can disable the index by setting DISABLE_INDEX to YES. Then you can
put in your own header file by writing your own header and feed that to
HTML_HEADER.

<li><b>The overall HTML output looks different, while I only wanted to 
       use my own html header file</b>

You probably forgot to include the stylesheet <code>doxygen.css</code> that 
doxygen generates. You can include this by putting
\verbatim
<LINK HREF="doxygen.css" REL="stylesheet" TYPE="text/css">
\endverbatim
in the HEAD section of the HTML page.

<li><b>Why does doxygen use Qt?</b>

The most important reason is to have a platform abstraction for most 
Unices and Windows by means of the QFile, QFileInfo, QDir, QDate, 
QTime and QIODevice classes. 
Another reason is for the nice and bug free utility classes, like QList, 
QDict, QString, QArray, QTextStream, QRegExp, QXML etc. 

The GUI front-end doxywizard uses Qt for... well... the GUI!

<li><b>How can I exclude all test directories from my directory tree?</b>

Simply put an exclude pattern like this in the configuration file:

\verbatim
EXCLUDE_PATTERNS = */test/*
\endverbatim

<li><b>Doxygen automatically generates a link to the 
       class MyClass somewhere in the running text. 
       How do I prevent that at a certain place?</b>

Put a \% in front of the class name. Like this: \%MyClass. Doxygen will then
remove the % and keep the word unlinked.

<li><b>My favourite programming language is X. Can I still use doxygen?</b>

No, not as such; doxygen needs to understand the structure of what it reads. 
If you don't mind spending some time on it, there are several options:
- If the grammar of X is close to C or C++, then it is probably not too hard to
  tweak src/scanner.l a bit so the language is supported. This is done
  for all other languages directly supported by doxygen 
  (i.e. Java, IDL, C#, PHP).
- If the grammar of X is somewhat different than you can write an input
  filter that translates X into something similar enough to C/C++ for
  doxygen to understand (this approach is taken for VB, Object Pascal, and
  Javascript, see http://www.stack.nl/~dimitri/doxygen/download.html#helpers).
- If the grammar is completely different one could write a parser for X and 
  write a backend that produces a similar syntax tree as is done by 
  src/scanner.l (and also by src/tagreader.cpp while reading tag files).

<li><b>Help! I get the cryptic message 
 "input buffer overflow, can't enlarge buffer because scanner uses REJECT"</b>

This error happens when doxygen lexical scanner has a rule that matches
more than 16K of input characters in one go. I've seen this happening 
on a very large generated file (\>16K lines), where the built-in preprocessor 
converted it into an empty file (with \>16K of newlines). Another case
where this might happen is if you have lines in your code with more than
16K characters. 

If you have run into such a case and want me to fix it, you
should send me a code fragment that triggers the message. To work around
the problem, put some line-breaks into your file, split it up into smaller 
parts, or exclude it from the input using EXCLUDE.

<li><b>When running make in the latex dir I get "TeX capacity exceeded". Now what?</b>

You can edit the texmf.cfg file to increase the default values of the 
various buffers and then run "texconfig init".

<li><b>Why are dependencies via STL classes not shown in the dot graphs?</b>

Doxygen is unware of the STL classes, so it does not know that class A relates
to class B in the following example

\code
#include <vector>

using namespace std;

class B {};

class A 
{
  public:
    vector<B> m_bvec;
};
\endcode

To overcome this problem you could provide the definition of the vector 
class to doxygen (by including the file that defines it at the INPUT tag 
in the config file). Since STL header files are often messy, a 
(possibly) better approach is to include a dummy definition of a vector 
class to the input. Here is an example of a dummy STL file for the vector 
class:

\code
namespace std {
  /*! STL vector class */
  template<class T> class vector { public: T element; };
}
\endcode

I'm still looking for someone who can provide me with definitions
for all (relevant) STL classes.

<li><b>How did doxygen get its name?</b>

Doxygen got its name from playing with the words 
documentation and generator.

\verbatim
documentation -> docs -> dox
generator -> gen
\endverbatim

At the time I was looking into lex and yacc, where a lot of things start with
"yy", so the "y" slipped in and made things pronounceable 
(the proper pronouncement is Docs-ee-gen, so with a long "e").

<li><b>What was the reason to develop doxygen?</b>

I once wrote a GUI widget based on the Qt library (it is still available at
http://qdbttabular.sourceforge.net/ and maintained by Sven Meyer). 
Qt had nicely generated documentation (using an internal tool which 
they didn't want to release) and I wrote similar docs by hand. 
This was a nightmare to maintain, so I wanted a similar tool. I looked at
Doc++ but that just wasn't good enough (it didn't support signals and
slots and did not have the Qt look and feel I had grown to like), 
so I started to write my own tool...

</ol>

\htmlonly
Go to the <a href="trouble.html">next</a> section or return to the
 <a href="index.html">index</a>.
\endhtmlonly

*/