summaryrefslogtreecommitdiffstats
path: root/doc/src/frameworks-technologies/dbus-adaptors.qdoc
diff options
context:
space:
mode:
Diffstat (limited to 'doc/src/frameworks-technologies/dbus-adaptors.qdoc')
-rw-r--r--doc/src/frameworks-technologies/dbus-adaptors.qdoc494
1 files changed, 494 insertions, 0 deletions
diff --git a/doc/src/frameworks-technologies/dbus-adaptors.qdoc b/doc/src/frameworks-technologies/dbus-adaptors.qdoc
new file mode 100644
index 0000000..0a4dea7
--- /dev/null
+++ b/doc/src/frameworks-technologies/dbus-adaptors.qdoc
@@ -0,0 +1,494 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at http://qt.nokia.com/contact.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+ \page usingadaptors.html
+ \title Using QtDBus Adaptors
+
+ \ingroup best-practices
+
+ Adaptors are special classes that are attached to any QObject-derived class
+ and provide the interface to the external world using D-Bus. Adaptors are
+ intended to be lightweight classes whose main purpose is to relay calls to
+ and from the real object, possibly validating or converting the input from
+ the external world and, thus, protecting the real object.
+
+ Unlike multiple inheritance, adaptors can be added at any time to any object
+ (but not removed), which allows for greater flexibility when exporting
+ existing classes. Another advantage of adaptors is to provide similar but not
+ identical functionality in methods of the same name in different interfaces,
+ a case which can be quite common when adding a new version of a standard
+ interface to an object.
+
+ In order to use an adaptor, one must create a class which inherits
+ QDBusAbstractAdaptor. Since that is a standard QObject-derived class, the
+ Q_OBJECT macro must appear in the declaration and the source file must be
+ processed with the \l {moc} tool. The class must also contain one
+ Q_CLASSINFO entry with the \c {"D-Bus Interface"} name, declaring which
+ interface it is exporting. Only one entry per class is supported.
+
+ Any public slot in the class will be accessible through the bus over messages
+ of the MethodCall type. (See \l {Declaring Slots in D-Bus Adaptors} for more
+ information). Signals in the class will be automatically relayed over D-Bus.
+ However, not all types are allowed signals or slots' parameter lists: see
+ \l {The QtDBus Type System} for more information.
+
+ Also, any property declared with Q_PROPERTY will be automatically exposed
+ over the Properties interface on D-Bus. Since the QObject property system
+ does not allow for non-readable properties, it is not possible to declare
+ write-only properties using adaptors.
+
+ More information:
+ \list
+ \o \l{Declaring Slots in D-Bus Adaptors}
+ \o \l{Declaring Signals in D-Bus Adaptors}
+ \o \l{The QtDBus Type System}
+ \o \l{D-Bus Adaptor Example}
+ \endlist
+
+ \sa QDBusAbstractAdaptor
+*/
+
+/*!
+ \page qdbusadaptorexample.html
+ \title D-Bus Adaptor Example
+
+ \previouspage The QtDBus Type System
+ \contentspage Using QtDBus Adaptors
+
+ The following example code shows how a D-Bus interface can be implemented
+ using an adaptor.
+
+ A sample usage of QDBusAbstractAdaptor is as follows:
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 0
+
+ The code above would create an interface that could be represented more or less in the following
+ canonical representation:
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 1
+
+ This adaptor could be used in the application's main function as follows
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 2
+
+ Break-down analysis:
+ \tableofcontents
+
+ \section1 The header
+
+ The header of the example is:
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 3
+
+ The code does the following:
+ \list
+ \o it declares the adaptor MainApplicationAdaptor, which descends from QDBusAbstractAdaptor
+ \o it declares the Qt meta-object data using the Q_OBJECT macro
+ \o it declares the name of the D-Bus interface it implements.
+ \endlist
+
+ \section1 The properties
+
+ The properties are declared as follows:
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 4
+
+ And are implemented as follows:
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 5
+
+ The code declares three properties: one of them is a read-write property called "caption" of
+ string type. The other two are read-only, also of the string type.
+
+ The properties organizationName and organizationDomain are simple relays of the app object's
+ organizationName and organizationDomain properties. However, the caption property requires
+ verifying if the application has a main window associated with it: if there isn't any, the
+ caption property is empty. Note how it is possible to access data defined in other objects
+ through the getter/setter functions.
+
+ \section1 The constructor
+
+ The constructor:
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 6
+
+ The constructor does the following:
+ \list
+ \o it initialises its base class (QDBusAbstractAdaptor) with the parent object it is related to.
+ \o it stores the app pointer in a member variable. Note that it would be possible to access the
+ same object using the QDBusAbstractAdaptor::object() function, but it would be necessary to
+ use \a static_cast<> to properly access the methods in QApplication that are not part of
+ QObject.
+ \o it connects the application's signal \a aboutToQuit to its own signal \a aboutToQuit.
+ \o it connects the application's signal \a focusChanged to a private slot to do some further
+ processing before emitting a D-Bus signal.
+ \endlist
+
+ Note that there is no destructor in the example. An eventual destructor could be used to emit
+ one last signal before the object is destroyed, for instance.
+
+ \section1 Slots/methods
+
+ The public slots in the example (which will be exported as D-Bus methods) are the following:
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 7
+
+ This snippet of code defines 4 methods with different properties each:
+ \list 1
+ \o \c quit: this method takes no parameters and is defined to be asynchronous. That is, callers
+ are expected to use "fire-and-forget" mechanism when calling this method, since it provides no
+ useful reply. This is represented in D-Bus by the use of the
+ org.freedesktop.DBus.Method.NoReply annotation. See \l Q_NOREPLY for more information on
+ asynchronous methods
+
+ \o \c reparseConfiguration: this simple method, with no input or output arguments simply relays
+ the call to the application's reparseConfiguration member function.
+
+ \o \c mainWindowObject: this method takes no input parameter, but returns one string output
+ argument, containing the path to the main window object (if the application has a main
+ window), or an empty string if it has no main window. Note that this method could have also
+ been written: void mainWindowObject(QString &path).
+
+ \o \c setSessionManagement: this method takes one input argument (a boolean) and, depending on
+ its value, it calls one function or another in the application.
+ \endlist
+
+ See also: \l Q_NOREPLY.
+
+ \section1 Signals
+
+ The signals in this example are defined as follows:
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 8
+
+ However, signal definition isn't enough: signals have to be emitted. One simple way of emitting
+ signals is to connect another signal to them, so that Qt's signal handling system chains them
+ automatically. This is what is done for the \a aboutToQuit signal.
+
+ When this is the case, one can use the QDBusAbstractAdaptor::setAutoRelaySignals to
+ automatically connect every signal from the real object to the adaptor.
+
+ When simple signal-to-signal connection isn't enough, one can use a private slot do do some
+ work. This is what was done for the mainWindowHasFocus signal:
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 9
+
+ This private slot (which will not be exported as a method via D-Bus) was connected to the
+ \c focusChanged signal in the adaptor's constructor. It is therefore able to shape the
+ application's signal into what the interface expects it to be.
+*/
+
+/*!
+ \page qdbusdeclaringslots.html
+ \title Declaring Slots in D-Bus Adaptors
+
+ \contentspage Using QtDBus Adaptors
+ \nextpage Declaring Signals in D-Bus Adaptors
+
+ Slots in D-Bus adaptors are declared just like normal, public slots, but their
+ parameters must follow certain rules (see \l{The QtDBus Type System} for more
+ information). Slots whose parameters do not follow those rules or that are not
+ public will not be accessible via D-Bus.
+
+ Slots can have one parameter of type \c{const QDBusMessage &}, which must
+ appear at the end of the input parameter list, before any output parameters.
+ This parameter, if present, will be initialized with a copy of the
+ current message being processed, which allows the callee to obtain
+ information about the caller, such as its connection name.
+
+ Slots can be of three kinds:
+ \list 1
+ \o Asynchronous
+ \o Input-only
+ \o Input-and-output
+ \endlist
+
+ \section1 Asynchronous Slots
+ Asynchronous slots are those that do not normally return any reply to the
+ caller. For that reason, they cannot take any output parameters. In most
+ cases, by the time the first line of the slot is run, the caller function
+ has already resumed working.
+
+ However, slots must not rely on that behavior. Scheduling and message-dispatching
+ issues could change the order in which the slot is run. Code intending to
+ synchronize with the caller should provide its own method of synchronization.
+
+ Asynchronous slots are marked by the keyword \l Q_NOREPLY in the method
+ signature, before the \c void return type and the slot name. (See the
+ \c quit() slot in the \l{D-Bus Adaptor Example}).
+
+ \section1 Input-Only Slots
+
+ Input-only slots are normal slots that take parameters passed by value or
+ by constant reference. However, unlike asynchronous slots, the caller is
+ usually waiting for completion of the callee before resuming operation.
+ Therefore, non-asynchronous slots should not block or should state it its
+ documentation that they may do so.
+
+ Input-only slots have no special marking in their signature, except that
+ they take only parameters passed by value or by constant reference.
+ Optionally, slots can take a QDBusMessage parameter as a last parameter,
+ which can be used to perform additional analysis of the method call message.
+
+ \section1 Input and Output Slots
+
+ Like input-only slots, input-and-output slots are those that the caller is
+ waiting for a reply. Unlike input-only ones, though, this reply will contain
+ data. Slots that output data may contain non-constant references and may
+ return a value as well. However, the output parameters must all appear at
+ the end of the argument list and may not have input arguments interleaved.
+ Optionally, a QDBusMessage argument may appear between the input and the
+ output arguments.
+
+ \section1 Automatic Replies
+
+ Method replies are generated automatically with the contents of the output
+ parameters (if there were any) by the QtDBus implementation. Slots need not
+ worry about constructing proper QDBusMessage objects and sending them over
+ the connection.
+
+ However, the possibility of doing so remains there. Should the slot find out
+ it needs to send a special reply or even an error, it can do so by using
+ QDBusMessage::createReply() or QDBusMessage::createErrorReply() on the
+ QDBusMessage parameter and send it with QDBusConnection::send(). The
+ QtDBus implementation will not generate any reply if the slot did so.
+
+ \warning When a caller places a method call and waits for a reply, it will
+ only wait for a limited amount of time. Slots intending to take a long time
+ to complete should make that fact clear in documentation so that callers
+ properly set higher timeouts.
+
+ \section1 Delayed Replies
+
+ In some circumstances, the called slot may not be able to process
+ the request immediately. This is frequently the case when the
+ request involves an I/O or networking operation which may block.
+
+ If this is the case, the slot should return control to the
+ application's main loop to avoid freezing the user interface, and
+ resume the process later. To accomplish this, it should make use
+ of the extra \c QDBusMessage parameter at the end of the input
+ parameter list and request a delayed reply.
+
+ We do this by writing a slot that stores the request data in a
+ persistent structure, indicating to the caller using
+ \l{QDBusMessage::setDelayedReply()}{QDBusMessage::setDelayedReply(true)}
+ that the response will be sent later.
+
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 10
+
+ The use of
+ \l{QDBusConnection::send()}{QDBusConnection::sessionBus().send(data->reply)}
+ is needed to explicitly inform the caller that the response will be delayed.
+ In this case, the return value is unimportant; we return an arbitrary value
+ to satisfy the compiler.
+
+ When the request is processed and a reply is available, it should be sent
+ using the \c QDBusMessage object that was obtained. In our example, the
+ reply code could be something as follows:
+
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 11
+
+ As can be seen in the example, when a delayed reply is in place,
+ the return value(s) from the slot will be ignored by QtDBus. They
+ are used only to determine the slot's signature when communicating
+ the adaptor's description to remote applications, or in case the
+ code in the slot decides not to use a delayed reply.
+
+ The delayed reply itself is requested from QtDBus by calling
+ QDBusMessage::reply() on the original message. It then becomes the
+ resposibility of the called code to eventually send a reply to the
+ caller.
+
+ \warning When a caller places a method call and waits for a reply, it will
+ only wait for a limited amount of time. Slots intending to take a long time
+ to complete should make that fact clear in documentation so that callers
+ properly set higher timeouts.
+
+ \sa {Using QtDBus Adaptors}, {Declaring Signals in D-Bus Adaptors},
+ {The QtDBus Type System}, QDBusConnection, QDBusMessage
+*/
+
+/*!
+ \page qdbusdeclaringsignals.html
+ \title Declaring Signals in D-Bus Adaptors
+
+ \previouspage Declaring Slots in D-Bus Adaptors
+ \contentspage Using QtDBus Adaptors
+ \nextpage The QtDBus Type System
+
+ Any signal in a class derived from QDBusAbstractAdaptor will be automatically
+ relayed into D-Bus, provided that the signal's parameters conform to certain
+ rules (see \l{The QtDBus Type System} for more information). No special code
+ is necessary to make this relay.
+
+ However, signals must still be emitted. The easiest way to emit an adaptor
+ signal is to connect another signal to it, so that Qt's signals and slots
+ mechanism automatically emits the adaptor signal, too. This can be done in
+ the adaptor's constructor, as has been done in the
+ \l{D-Bus Adaptor Example}{D-Bus Adaptor example}.
+
+ The QDBusAbstractAdaptor::setAutoRelaySignals() convenience function can also
+ be used to make and break connections between signals in the real object and
+ the corresponding signals in the adaptor. It will inspect the list of signals
+ in both classes and connect those whose parameters match exactly.
+
+ \sa {Using QtDBus Adaptors},
+ {Declaring Slots in D-Bus Adaptors},
+ {The QtDBus Type System}, QDBusAbstractAdaptor
+*/
+
+/*!
+ \page qdbustypesystem.html
+ \title The QtDBus Type System
+
+ \previouspage Declaring Signals in D-Bus Adaptors
+ \contentspage Using QtDBus Adaptors
+ \nextpage D-Bus Adaptor Example
+
+ D-Bus has an extensible type system based on a few primitives and
+ composition of the primitives in arrays and structures. QtDBus
+ implements the interface to that type system through the
+ QDBusArgument class, allowing user programs to send and receive
+ practically every C++ type over the bus.
+
+ \section1 Primitive Types
+
+ The primitive types are supported natively by QDBusArgument and
+ need no special customization to be sent or received. They are
+ listed below, along with the C++ class they relate to:
+
+ \table
+ \header
+ \o Qt type
+ \o D-Bus equivalent type
+ \row
+ \o uchar
+ \o BYTE
+ \row
+ \o bool
+ \o BOOLEAN
+ \row
+ \o short
+ \o INT16
+ \row
+ \o ushort
+ \o UINT16
+ \row
+ \o int
+ \o INT32
+ \row
+ \o uint
+ \o UINT32
+ \row
+ \o qlonglong
+ \o INT64
+ \row
+ \o qulonglong
+ \o UINT64
+ \row
+ \o double
+ \o DOUBLE
+ \row
+ \o QString
+ \o STRING
+ \row
+ \o QDBusVariant
+ \o VARIANT
+ \row
+ \o QDBusObjectPath
+ \o OBJECT_PATH
+ \row
+ \o QDBusSignature
+ \o SIGNATURE
+ \endtable
+
+ Aside from the primitive types, QDBusArgument also supports two
+ non-primitive types natively, due to their widespread use in Qt
+ applications: QStringList and QByteArray.
+
+ \section1 Compound Types
+
+ D-Bus specifies three types of aggregations of primitive types
+ that allow one to create compound types. They are \c ARRAY, \c
+ STRUCT and maps/dictionaries.
+
+ Arrays are sets of zero or more elements of the same type, while
+ structures are a set of a fixed number of elements, each of any
+ type. Maps or dictionaries are implemented as arrays of a pair of
+ elements, so there can be zero or more elements in one map.
+
+ \section1 Extending the Type System
+
+ In order to use one's own type with QtDBus, the type has to be
+ declared as a Qt meta-type with the Q_DECLARE_METATYPE() macro and
+ registered with the qDBusRegisterMetaType() function. The
+ streaming operators \c{operator>>} and \c{operator<<} will be
+ automatically found by the registration system.
+
+ QtDBus provides template specializations for arrays and maps for
+ use with Qt's \l{Container classes}{container classes}, such as
+ QMap and QList, so it is not necessary to write the streaming
+ operator functions for those. For other types, and specially for
+ types implementing structures, the operators have to be explicitly
+ implemented.
+
+ See the documentation for QDBusArgument for examples for
+ structures, arrays and maps.
+
+ \section1 The Type System in Use
+
+ All of the QtDBus types (primitives and user-defined alike) can be
+ used to send and receive messages of all types over the bus.
+
+ \warning You may not use any type that is not on the list above,
+ including \a typedefs to the types listed. This also includes
+ QList<QVariant> and QMap<QString,QVariant>.
+*/
+
+/*!
+ \macro Q_NOREPLY
+ \relates QDBusAbstractAdaptor
+ \since 4.2
+
+ The Q_NOREPLY macro can be used to mark a method to be called and not wait for it to finish
+ processing before returning from QDBusInterface::call(). The called method cannot return any
+ output arguments and, if it does, any such arguments will be discarded.
+
+ You can use this macro in your own adaptors by placing it before your method's return value
+ (which must be "void") in the class declaration, as shown in the example:
+ \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 12
+
+ Its presence in the method implementation (outside the class declaration) is optional.
+
+ \sa {Using QtDBus Adaptors}
+*/