summaryrefslogtreecommitdiffstats
path: root/doc/src/frameworks-technologies/richtext.qdoc
diff options
context:
space:
mode:
Diffstat (limited to 'doc/src/frameworks-technologies/richtext.qdoc')
-rw-r--r--doc/src/frameworks-technologies/richtext.qdoc1226
1 files changed, 1226 insertions, 0 deletions
diff --git a/doc/src/frameworks-technologies/richtext.qdoc b/doc/src/frameworks-technologies/richtext.qdoc
new file mode 100644
index 0000000..7125b81
--- /dev/null
+++ b/doc/src/frameworks-technologies/richtext.qdoc
@@ -0,0 +1,1226 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at http://qt.nokia.com/contact.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+ \group richtext-processing
+ \title Rich Text Processing APIs
+*/
+
+/*!
+ \page richtext.html
+ \title Rich Text Processing
+ \brief An overview of Qt's rich text processing, editing and display features.
+
+ \ingroup frameworks-technologies
+
+ \nextpage Rich Text Document Structure
+
+ The Scribe framework provides a set of classes for reading and manipulating
+ structured rich text documents. Unlike previous rich text support in Qt, the
+ new classes are centered around the QTextDocument class rather than raw
+ textual information. This enables the developer to create and modify
+ structured rich text documents without having to prepare content in an
+ intermediate markup format.
+
+ The information within a document can be accessed via two complementary
+ interfaces: A cursor-based interface is used for editing, and a read-only
+ hierarchical interface provides a high level overview of the document
+ structure. The main advantage of the cursor-based interface is that the
+ text can be edited using operations that mimic a user's interaction with
+ an editor, without losing the underlying structure of the document. The
+ read-only hierarchical interface is most useful when performing operations
+ such as searching and document export.
+
+ This document is divided up into chapters for convenient reference:
+
+ \list
+ \i \l{Rich Text Document Structure} outlines
+ the different kinds of elements in a QTextDocument, and describes how
+ they are arranged in a document structure.
+ \i \l{The QTextCursor Interface} explains how rich
+ text documents can be edited using the cursor-based interface.
+ \i \l{Document Layouts} briefly explains the role of document layouts.
+ \i \l{Common Rich Text Editing Tasks} examines some
+ common tasks that involve reading or manipulating rich text documents.
+ \i \l{Advanced Rich Text Processing} examines advanced rich text editing tasks.
+ \i \l{Supported HTML Subset} lists the HTML tags supported by QTextDocument.
+ \endlist
+
+ \section1 Rich Text Processing APIs
+
+ Qt provides an extensive collection of classes for parsing, rendering
+ manipulating and editing rich text.
+
+ \annotatedlist richtext-processing
+*/
+
+/*!
+ \page richtext-structure.html
+ \contentspage richtext.html Contents
+ \previouspage Rich Text Processing
+ \nextpage The QTextCursor Interface
+
+ \title Rich Text Document Structure
+
+ \tableofcontents
+
+ Text documents are represented by the QTextDocument class, which
+ contains information about the document's internal representation, its
+ structure, and keeps track of modifications to provide undo/redo
+ facilities.
+
+ The structured representation of a text document presents its contents as
+ a hierarchy of text blocks, frames, tables, and other objects. These provide
+ a logical structure to the document and describe how their contents will be
+ displayed. Generally, frames and tables are used to group other
+ structures while text blocks contain the actual textual information.
+
+ New elements are created and inserted into the document programmatically
+ \l{richtext-cursor.html}{with a QTextCursor} or by using an editor
+ widget, such as QTextEdit. Elements can be given a particular format when
+ they are created; otherwise they take the cursor's current format for the
+ element.
+
+ \table
+ \row
+ \i \inlineimage richtext-document.png
+ \i \bold{Basic structure}
+
+ The "top level" of a document might be populated in the way shown.
+ Each document always contains a root frame, and this always contains
+ at least one text block.
+
+ For documents with some textual content, the root
+ frame usually contains a sequence of blocks and other elements.
+
+ Sequences of frames and tables are always separated by text blocks in a
+ document, even if the text blocks contain no information. This ensures that
+ new elements can always be inserted between existing structures.
+ \endtable
+
+ In this chapter, we look at each of the structural elements
+ used in a rich text document, outline their features and uses, and show
+ how to examine their contents. Document editing is described in
+ \l{richtext-cursor.html}{The QTextCursor Interface}.
+
+ \section1 Rich Text Documents
+
+ QTextDocument objects contain all the information required to construct
+ rich text documents.
+ Text documents can be accessed in two complementary ways: as a linear
+ buffer for editors to use, and as an object hierarchy that is useful to
+ layout engines.
+ In the hierarchical document model, objects generally correspond to
+ visual elements such as frames, tables, and lists. At a lower level,
+ these elements describe properties such as the text style and alignment.
+ The linear representation of the document is used for editing and
+ manipulation of the document's contents.
+
+ Although QTextEdit makes it easy to display and edit rich text, documents
+ can also be used independently of any editor widget, for example:
+
+ \snippet doc/src/snippets/code/doc_src_richtext.qdoc 0
+
+ Alternatively, they can be extracted from an existing editor:
+
+ \snippet doc/src/snippets/code/doc_src_richtext.qdoc 1
+
+ This flexibility enables applications to handle multiple rich text
+ documents without the overhead of multiple editor widgets, or requiring
+ documents to be stored in some intermediate format.
+
+ An empty document contains a root frame which itself contains a single
+ empty text block. Frames provide logical separation between parts of the document, but
+ also have properties that determine how they will appear when rendered.
+ A table is a specialized type of frame that consists of a number of
+ cells, arranged into rows and columns, each of which can contain
+ further structure and text. Tables provide management and layout
+ features that allow flexible configurations of cells to be created.
+
+ Text blocks contain text fragments, each of which specifies text and
+ character format information. Textual properties are defined both at
+ the character level and at the block level. At the character level,
+ properties such as font family, text color, and font weight can be
+ specified. The block level properties control the higher level
+ appearance and behavior of the text, such as the direction of text
+ flow, alignment, and background color.
+
+ The document structure is not manipulated directly. Editing is
+ performed through a cursor-based interface.
+ The \l{richtext-cursor.html}{text cursor interface}
+ automatically inserts new document elements into the root frame, and
+ ensures that it is padded with empty blocks where necessary.
+
+ We obtain the root frame in the following manner:
+
+ \snippet doc/src/snippets/textdocument-frames/xmlwriter.h 0
+ \snippet doc/src/snippets/textdocument-frames/xmlwriter.cpp 0
+
+ When navigating the document structure, it is useful to begin at the
+ root frame because it provides access to the entire document structure.
+
+
+ \section1 Document Elements
+
+ Rich text documents usually consist of common elements such as paragraphs,
+ frames, tables, and lists. These are represented in a QTextDocument
+ by the QTextBlock, QTextFrame, QTextTable, and QTextList classes.
+ Unlike the other elements in a document, images are represented by
+ specially formatted text fragments. This enables them to be placed
+ formatted inline with the surrounding text.
+
+ The basic structural building blocks in documents are QTextBlock and
+ QTextFrame. Blocks themselves contain fragments of rich text
+ (QTextFragment), but these do not directly influence the high level
+ structure of a document.
+
+ Elements which can group together other document elements are typically
+ subclasses of QTextObject, and fall into two categories: Elements that
+ group together text blocks are subclasses of QTextBlockGroup, and those
+ that group together frames and other elements are subclasses of QTextFrame.
+
+ \section2 Text Blocks
+
+ Text blocks are provided by the QTextBlock class.
+
+ Text blocks group together fragments of text with different character formats,
+ and are used to represent paragraphs in the document. Each block
+ typically contains a number of text fragments with different styles.
+ Fragments are created when text is inserted into the document, and more
+ of them are added when the document is edited. The document splits, merges,
+ and removes fragments to efficiently represent the different styles
+ of text in the block.
+
+ The fragments within a given block can be examined by using a
+ QTextBlock::iterator to traverse the block's internal structure:
+
+ \snippet doc/src/snippets/textblock-fragments/xmlwriter.cpp 3
+ \snippet doc/src/snippets/textblock-fragments/xmlwriter.cpp 5
+ \snippet doc/src/snippets/textblock-fragments/xmlwriter.cpp 6
+
+ Blocks are also used to represent list items. As a result, blocks can
+ define their own character formats which contain information about
+ block-level decoration, such as the type of bullet points used for
+ list items. The formatting for the block itself is described by the
+ QTextBlockFormat class, and describes properties such as text alignment,
+ indentation, and background color.
+
+ Although a given document may contain complex structures, once we have a
+ reference to a valid block in the document, we can navigate between each
+ of the text blocks in the order in which they were written:
+
+ \snippet doc/src/snippets/textblock-fragments/xmlwriter.cpp 0
+ \snippet doc/src/snippets/textblock-fragments/xmlwriter.cpp 1
+ \snippet doc/src/snippets/textblock-fragments/xmlwriter.cpp 2
+
+ This method is useful for when you want to extract just the rich text from a
+ document because it ignores frames, tables, and other types of structure.
+
+ QTextBlock provides comparison operators that make it easier to manipulate
+ blocks: \l{QTextBlock::operator==()}{operator==()} and
+ \l{QTextBlock::operator!=()}{operator!=()} are used to test whether two
+ blocks are the same, and \l{QTextBlock::operator<()}{operator<()} is used
+ to determine which one occurs first in a document.
+
+ \section2 Frames
+
+ Frames are provided by the QTextFrame class.
+
+ Text frames group together blocks of text and child frames, creating
+ document structures that are larger than paragraphs. The format of a frame
+ specifies how it is rendered and positioned on the page. Frames are
+ either inserted into the text flow, or they float on the left or right
+ hand side of the page.
+ Each document contains a root frame that contains all the other document
+ elements. As a result, all frames except the root frame have a parent
+ frame.
+
+ Since text blocks are used to separate other document elements, each
+ frame will always contain at least one text block, and zero or more
+ child frames. We can inspect the contents of a frame by using a
+ QTextFrame::iterator to traverse the frame's child elements:
+
+ \snippet doc/src/snippets/textdocument-frames/xmlwriter.cpp 1
+ \snippet doc/src/snippets/textdocument-frames/xmlwriter.cpp 2
+
+ Note that the iterator selects both frames and blocks, so it is necessary
+ to check which it is referring to. This allows us to navigate the document
+ structure on a frame-by-frame basis yet still access text blocks if
+ required. Both the QTextBlock::iterator and QTextFrame::iterator classes
+ can be used in complementary ways to extract the required structure from
+ a document.
+
+ \section2 Tables
+
+ Tables are provided by the QTextTable class.
+
+ Tables are collections of cells that are arranged in rows and columns.
+ Each table cell is a document element with its own character format, but it
+ can also contain other elements, such as frames and text blocks. Table cells
+ are automatically created when the table is constructed, or when extra rows
+ or columns are added. They can also be moved between tables.
+
+ QTextTable is a subclass of QTextFrame, so tables are treated like frames
+ in the document structure. For each frame that we encounter in the
+ document, we can test whether it represents a table, and deal with it in a
+ different way:
+
+ \snippet doc/src/snippets/textdocument-tables/xmlwriter.cpp 0
+ \snippet doc/src/snippets/textdocument-tables/xmlwriter.cpp 1
+
+ The cells within an existing table can be examined by iterating through
+ the rows and columns.
+
+ \snippet doc/src/snippets/textdocument-tables/mainwindow.cpp 9
+ \snippet doc/src/snippets/textdocument-tables/mainwindow.cpp 10
+ \snippet doc/src/snippets/textdocument-tables/mainwindow.cpp 11
+ \snippet doc/src/snippets/textdocument-tables/mainwindow.cpp 12
+
+
+ \section2 Lists
+
+ Lists are provided by the QTextList class.
+
+ Lists are sequences of text blocks that are formatted in the usual way, but
+ which also provide the standard list decorations such as bullet points and
+ enumerated items. Lists can be nested, and will be indented if the list's
+ format specifies a non-zero indentation.
+
+ We can refer to each list item by its index in the list:
+
+ \snippet doc/src/snippets/textdocument-listitems/mainwindow.cpp 0
+ \snippet doc/src/snippets/textdocument-listitems/mainwindow.cpp 1
+ \snippet doc/src/snippets/textdocument-listitems/mainwindow.cpp 2
+
+ Since QTextList is a subclass of QTextBlockGroup, it does not group the
+ list items as child elements, but instead provides various functions for
+ managing them. This means that any text block we find when traversing a
+ document may actually be a list item. We can ensure that list items are
+ correctly identified by using the following code:
+
+ \snippet doc/src/snippets/textdocument-listitems/mainwindow.cpp 3
+ \snippet doc/src/snippets/textdocument-listitems/mainwindow.cpp 4
+ \snippet doc/src/snippets/textdocument-listitems/mainwindow.cpp 5
+ \snippet doc/src/snippets/textdocument-listitems/mainwindow.cpp 6
+ \snippet doc/src/snippets/textdocument-listitems/mainwindow.cpp 7
+
+
+ \section2 Images
+
+ Images in QTextDocument are represented by text fragments that reference
+ external images via the resource mechanism. Images are created using the
+ cursor interface, and can be modified later by changing the character
+ format of the image's text fragment:
+
+ \snippet doc/src/snippets/textdocument-imageformat/main.cpp 0
+ \snippet doc/src/snippets/textdocument-imageformat/main.cpp 1
+ \snippet doc/src/snippets/textdocument-imageformat/main.cpp 2
+
+ The fragment that represents the image can be found by iterating over
+ the fragments in the text block that contains the image.
+*/
+
+/*!
+ \page richtext-cursor.html
+ \contentspage richtext.html Contents
+ \previouspage Rich Text Document Structure
+ \nextpage Document Layouts
+
+ \title The QTextCursor Interface
+
+ \tableofcontents
+
+ Documents can be edited via the interface provided by the QTextCursor
+ class; cursors are either created using a constructor or obtained from
+ an editor widget. The cursor is used to perform editing operations that
+ correspond exactly to those the user is able to make themselves in an
+ editor. As a result, information about the document structure is also
+ available through the cursor, and this allows the structure to be
+ modified. The use of a cursor-oriented interface for editing makes the
+ process of writing a custom editor simpler for developers, since the
+ editing operations can be easily visualized.
+
+ The QTextCursor class also maintains information about any text it
+ has selected in the document, again following a model that is
+ conceptually similar to the actions made by the user to select text
+ in an editor.
+
+ Rich text documents can have multiple cursors
+ associated with them, and each of these contains information about their
+ position in the document and any selections that they may hold. This
+ cursor-based paradigm makes common operations, such as cutting and pasting
+ text, simple to implement programmatically, yet it also allows more complex
+ editing operations to be performed on the document.
+
+ This chapter describes most of the common editing operations that you
+ will need to perform using a cursor, from basic insertion of text and
+ document elements to more complex manipulation of document structures.
+
+ \section1 Cursor-Based Editing
+
+ At the simplest level, text documents are made up of a string of characters,
+ marked up in some way to represent the block structure of the text within the
+ document. QTextCursor provides a cursor-based interface that allows the
+ contents of a QTextDocument to be manipulated at the character level. Since
+ the elements (blocks, frames, tables, etc.) are also encoded in the character
+ stream, the document structure can itself be changed by the cursor.
+
+ The cursor keeps track of its location within its parent document, and can
+ report information about the surrounding structure, such as the enclosing
+ text block, frame, table, or list. The formats of the enclosing structures
+ can also be directly obtained through the cursor.
+
+ \section2 Using a Cursor
+
+ The main use of a cursor is to insert or modify text within a block.
+ We can use a text editor's cursor to do this:
+
+ \snippet doc/src/snippets/textblock-formats/main.cpp 0
+
+ Alternatively, we can obtain a cursor directly from a document:
+
+ \snippet doc/src/snippets/textdocument-images/main.cpp 0
+
+ The cursor is positioned at the start of the document so that we can write
+ into the first (empty) block in the document.
+
+ \section2 Grouping Cursor Operations
+
+ A series of editing operations can be packaged together so that they can
+ be replayed, or undone together in a single action. This is achieved by
+ using the \c beginEditBlock() and \c endEditBlock() functions in the
+ following way, as in the following example where we select the word that
+ contains the cursor:
+
+ \snippet doc/src/snippets/textdocument-selections/mainwindow.cpp 0
+
+ If editing operations are not grouped, the document automatically records
+ the individual operations so that they can be undone later. Grouping
+ operations into larger packages can make editing more efficient both for
+ the user and for the application, but care has to be taken not to group too
+ many operations together as the user may want find-grained control over the
+ undo process.
+
+ \section2 Multiple Cursors
+
+ Multiple cursors can be used to simultaneously edit the same document,
+ although only one will be visible to the user in a QTextEdit widget.
+ The QTextDocument ensures that each cursor writes text correctly and
+ does not interfere with any of the others.
+
+ \omit
+ \snippet doc/src/snippets/textdocument-cursors/main.cpp 0
+ \snippet doc/src/snippets/textdocument-cursors/main.cpp 1
+ \endomit
+
+ \section1 Inserting Document Elements
+
+ QTextCursor provides several functions that can be used to change the
+ structure of a rich text document. Generally, these functions allow
+ document elements to be created with relevant formatting information,
+ and they are inserted into the document at the cursor's position.
+
+ The first group of functions insert block-level elements, and update the
+ cursor position, but they do not return the element that was inserted:
+
+ \list
+ \i \l{QTextCursor::insertBlock()}{insertBlock()} inserts a new text block
+ (paragraph) into a document at the cursor's position, and moves the
+ cursor to the start of the new block.
+ \i \l{QTextCursor::insertFragment()}{insertFragment()} inserts an existing
+ text fragment into a document at the cursor's position.
+ \i \l{QTextCursor::insertImage()}{insertImage()} inserts an image into a
+ document at the cursor's position.
+ \i \l{QTextCursor::insertText()}{insertText()} inserts text into the
+ document at the cursor's position.
+ \endlist
+
+ You can examine the contents of the element that was inserted through the
+ cursor interface.
+
+ The second group of functions insert elements that provide structure to
+ the document, and return the structure that was inserted:
+
+ \list
+ \i \l{QTextCursor::insertFrame()}{insertFrame()} inserts a frame into the
+ document \e after the cursor's current block, and moves the cursor to
+ the start of the empty block in the new frame.
+ \i \l{QTextCursor::insertList()}{insertList()} inserts a list into the
+ document at the cursor's position, and moves the cursor to the start
+ of the first item in the list.
+ \i \l{QTextCursor::insertTable()}{insertTable()} inserts a table into
+ the document \e after the cursor's current block, and moves the cursor
+ to the start of the block following the table.
+ \endlist
+
+ These elements either contain or group together other elements in the
+ document.
+
+ \section2 Text and Text Fragments
+
+ Text can be inserted into the current block in the current character
+ format, or in a custom format that is specified with the text:
+
+ \snippet doc/src/snippets/textdocument-charformats/main.cpp 0
+
+ Once the character format has been used with a cursor, that format becomes
+ the default format for any text inserted with that cursor until another
+ character format is specified.
+
+ If a cursor is used to insert text without specifying a character format,
+ the text will be given the character format used at that position in the
+ document.
+
+ \section2 Blocks
+
+ Text blocks are inserted into the document with the
+ \l{QTextCursor::insertBlock()}{insertBlock()} function.
+
+ \snippet doc/src/snippets/textblock-formats/main.cpp 1
+
+ The cursor is positioned at the start of the new block.
+
+ \section2 Frames
+
+ Frames are inserted into a document using the cursor, and will be placed
+ within the cursor's current frame \e after the current block.
+ The following code shows how a frame can be inserted between two text
+ blocks in a document's root frame. We begin by finding the cursor's
+ current frame:
+
+ \snippet doc/src/snippets/textdocument-frames/mainwindow.cpp 0
+
+ We insert some text in this frame then set up a frame format for the
+ child frame:
+
+ \snippet doc/src/snippets/textdocument-frames/mainwindow.cpp 1
+
+ The frame format will give the frame an external margin of 32 pixels,
+ internal padding of 8 pixels, and a border that is 4 pixels wide.
+ See the QTextFrameFormat documentation for more information about
+ frame formats.
+
+ The frame is inserted into the document after the preceding text:
+
+ \snippet doc/src/snippets/textdocument-frames/mainwindow.cpp 2
+
+ We add some text to the document immediately after we insert the frame.
+ Since the text cursor is positioned \e{inside the frame} when it is inserted
+ into the document, this text will also be inserted inside the frame.
+
+ Finally, we position the cursor outside the frame by taking the last
+ available cursor position inside the frame we recorded earlier:
+
+ \snippet doc/src/snippets/textdocument-frames/mainwindow.cpp 3
+
+ The text that we add last is inserted after the child frame in the
+ document. Since each frame is padded with text blocks, this ensures that
+ more elements can always be inserted with a cursor.
+
+ \section2 Tables
+
+ Tables are inserted into the document using the cursor, and will be
+ placed within the cursor's current frame \e after the current block:
+
+ \snippet doc/src/snippets/textdocument-tables/mainwindow.cpp 0
+ \snippet doc/src/snippets/textdocument-tables/mainwindow.cpp 3
+
+ Tables can be created with a specific format that defines the overall
+ properties of the table, such as its alignment, background color, and
+ the cell spacing used. It can also determine the constraints on each
+ column, allowing each of them to have a fixed width, or resize according
+ to the available space.
+
+ \snippet doc/src/snippets/textdocument-tables/mainwindow.cpp 2
+
+ The columns in the table created above will each take up a certain
+ percentage of the available width. Note that the table format is
+ optional; if you insert a table without a format, some sensible
+ default values will be used for the table's properties.
+
+ Since cells can contain other document elements, they too can be
+ formatted and styled as necessary.
+
+ Text can be added to the table by navigating to each cell with the cursor
+ and inserting text.
+
+ \snippet doc/src/snippets/textdocument-tables/mainwindow.cpp 4
+
+ We can create a simple timetable by following this approach:
+
+ \snippet doc/src/snippets/textdocument-tables/mainwindow.cpp 5
+ \snippet doc/src/snippets/textdocument-tables/mainwindow.cpp 6
+ \snippet doc/src/snippets/textdocument-tables/mainwindow.cpp 7
+ \snippet doc/src/snippets/textdocument-tables/mainwindow.cpp 8
+
+ \section2 Lists
+
+ Lists of block elements can be automatically created and inserted into the
+ document at the current cursor position. Each list that is created in this
+ way requires a list format to be specified:
+
+ \snippet doc/src/snippets/textdocument-lists/mainwindow.cpp 0
+
+ The above code first checks whether the cursor is within an existing list
+ and, if so, gives the list format for the new list a suitable level of
+ indentation. This allows nested lists to be created with increasing
+ levels of indentation. A more sophisticated implementation would also use
+ different kinds of symbol for the bullet points in each level of the list.
+
+ \section2 Images
+
+ Inline images are added to documents through the cursor in the usual manner.
+ Unlike many other elements, all of the image properties are specified by the
+ image's format. This means that a QTextImageFormat object has to be
+ created before an image can be inserted:
+
+ \snippet doc/src/snippets/textdocument-images/main.cpp 1
+
+ The image name refers to an entry in the application's resource file.
+ The method used to derive this name is described in
+ \l{resources.html}{The Qt Resource System}.
+
+ \section1 Examples
+
+ Rich text is stored in text documents that can either be created by
+ importing HTML from an external source, or generated using a QTextCursor.
+
+ \section2 Manipulating Rich Text
+
+ The easiest way to use a rich text document is through
+ the QTextEdit class, providing an editable view onto a document. The code
+ below imports HTML into a document, and displays the document using a
+ text edit widget.
+
+ \snippet doc/src/snippets/scribe-overview/main.cpp 1
+
+ You can retrieve the document from the text edit using the
+ document() function. The document can then be edited programmatically
+ using the QTextCursor class. This class is modeled after a screen
+ cursor, and editing operations follow the same semantics. The following
+ code changes the first line of the document to a bold font, leaving all
+ other font properties untouched. The editor will be automatically
+ updated to reflect the changes made to the underlying document data.
+
+ \snippet doc/src/snippets/scribe-overview/main.cpp 0
+
+ Note that the cursor was moved from the start of the first line to the
+ end, but that it retained an anchor at the start of the line. This
+ demonstrates the cursor-based selection facilities of the
+ QTextCursor class.
+
+ \section2 Generating a Calendar
+
+ Rich text can be generated very quickly using the cursor-based
+ approach. The following example shows a simple calendar in a
+ QTextEdit widget with bold headers for the days of the week:
+
+ \snippet doc/src/snippets/textdocument-blocks/mainwindow.cpp 0
+ \codeline
+ \snippet doc/src/snippets/textdocument-blocks/mainwindow.cpp 1
+ \snippet doc/src/snippets/textdocument-blocks/mainwindow.cpp 2
+ \snippet doc/src/snippets/textdocument-blocks/mainwindow.cpp 3
+
+ The above example demonstrates how simple it is to quickly generate new
+ rich text documents using a minimum amount of code. Although we have
+ generated a crude fixed-pitch calendar to avoid quoting too much code,
+ Scribe provides much more sophisticated layout and formatting features.
+*/
+
+/*!
+ \page richtext-layouts.html
+ \contentspage richtext.html Contents
+ \previouspage The QTextCursor Interface
+ \nextpage Common Rich Text Editing Tasks
+
+ \title Document Layouts
+
+ \tableofcontents
+
+ The layout of a document is only relevant when it is to be displayed on
+ a device, or when some information is requested that requires a visual
+ representation of the document. Until this occurs, the document does
+ not need to be formatted and prepared for a device.
+
+ \section1 Overview
+
+ Each document's layout is managed by a subclass of the
+ QAbstractTextDocumentLayout class. This class provides a common
+ interface for layout and rendering engines. The default rendering
+ behavior is currently implemented in a private class. This approach
+ makes it possible to create custom layouts, and provides the
+ mechanism used when preparing pages for printing or exporting to
+ Portable Document Format (PDF) files.
+
+ \section1 Example - Shaped Text Layout
+
+ Sometimes it is important to be able to format plain text within an
+ irregularly-shaped region, perhaps when rendering a custom widget, for
+ example. Scribe provides generic features, such as those provided by
+ the QTextLayout class, to help developers perform word-wrapping and
+ layout tasks without the need to create a document first.
+
+ \img plaintext-layout.png
+
+ Formatting and drawing a paragraph of plain text is straightforward.
+ The example below will lay out a paragraph of text, using a single
+ font, around the right hand edge of a circle.
+
+ \snippet doc/src/snippets/plaintextlayout/window.cpp 0
+
+ We create a text layout, specifying the text string we want to display
+ and the font to use. We ensure that the text we supplied is formatted
+ correctly by obtaining text lines from the text format, and wrapping
+ the remaining text using the available space. The lines are positioned
+ as we move down the page.
+
+ The formatted text can be drawn onto a paint device; in the above code,
+ the text is drawn directly onto a widget.
+ */
+
+ /*!
+ \page richtext-common-tasks.html
+ \contentspage richtext.html Contents
+ \previouspage Document Layouts
+ \nextpage Advanced Rich Text Processing
+
+ \title Common Rich Text Editing Tasks
+
+ \tableofcontents
+
+ There are a number of tasks that are often performed by developers
+ when editing and processing text documents using Qt. These include the use
+ of display widgets such as QTextBrowser and QTextEdit, creation of
+ documents with QTextDocument, editing using a QTextCursor, and
+ exporting the document structure.
+ This document outlines some of the more common ways of using the rich
+ text classes to perform these tasks, showing convenient patterns that can
+ be reused in your own applications.
+
+ \section1 Using QTextEdit
+
+ A text editor widget can be constructed and used to display HTML in the
+ following way:
+
+ \snippet doc/src/snippets/code/doc_src_richtext.qdoc 2
+
+ By default, the text editor contains a document with a root frame, inside
+ which is an empty text block. This document can be obtained so that it can
+ be modified directly by the application:
+
+ \snippet doc/src/snippets/code/doc_src_richtext.qdoc 3
+
+ The text editor's cursor may also be used to edit a document:
+
+ \snippet doc/src/snippets/code/doc_src_richtext.qdoc 4
+
+ Although a document can be edited using many cursors at once, a QTextEdit
+ only displays a single cursor at a time. Therefore, if we want to update the
+ editor to display a particular cursor or its selection, we need to set the
+ editor's cursor after we have modified the document:
+
+ \snippet doc/src/snippets/code/doc_src_richtext.qdoc 5
+
+ \section1 Selecting Text
+
+ Text is selected by moving the cursor using operations that are similar to
+ those performed by a user in a text editor. To select text between two
+ points in the document, we need to position the cursor at the first point
+ then move it using a special mode (\l{QTextCursor::MoveMode}) with a
+ move operation (\l{QTextCursor::MoveOperation}).
+ When we select the text, we leave the selection anchor at the old cursor
+ position just as the user might do by holding down the Shift key when
+ selecting text:
+
+ \snippet doc/src/snippets/textdocument-selections/mainwindow.cpp 1
+
+ In the above code, a whole word is selected using this method. QTextCursor
+ provides a number of common move operations for selecting individual
+ characters, words, lines, and whole blocks.
+
+ \section1 Finding Text
+
+ QTextDocument provides a cursor-based interface for searching, making
+ it easy to find and modify text in the style of a text editor. The following
+ code finds all the instances of a particular word in a document, and changes
+ the color of each:
+
+ \snippet doc/src/snippets/textdocument-find/main.cpp 0
+ \snippet doc/src/snippets/textdocument-find/main.cpp 1
+
+ Note that the cursor does not have to be moved after each search and replace
+ operation; it is always positioned at the end of the word that was just
+ replaced.
+
+ \section1 Printing Documents
+
+ QTextEdit is designed for the display of large rich text documents that are
+ read on screen, rendering them in the same way as a web browser. As a result,
+ it does not automatically break the contents of the document into page-sized
+ pieces that are suitable for printing.
+
+ QTextDocument provides a \l{QTextDocument::print()}{print()} function to
+ allow documents to be printed using the QPrinter class. The following code
+ shows how to prepare a document in a QTextEdit for printing with a QPrinter:
+
+ \snippet doc/src/snippets/textdocument-printing/mainwindow.cpp 0
+
+ The document is obtained from the text editor, and a QPrinter is constructed
+ then configured using a QPrintDialog. If the user accepts the printer's
+ configuration then the document is formatted and printed using the
+ \l{QTextDocument::print()}{print()} function.
+*/
+
+/*!
+ \page richtext-advanced-processing.html
+ \contentspage richtext.html Contents
+ \previouspage Common Rich Text Editing Tasks
+ \nextpage Supported HTML Subset
+
+ \title Advanced Rich Text Processing
+
+ \section1 Handling Large Files
+
+ Qt does not limit the size of files that are used for text
+ processing. In most cases, this will not present a problem. For
+ especially large files, however, you might experience that your
+ application will become unresponsive or that you will run out of
+ memory. The size of the files you can load depends on your
+ hardware and on Qt's and your own application's implementation.
+
+ If you are faced with this problem, we recommend that you address the
+ following issues:
+
+ \list
+ \o You should consider breaking up large paragraphs into smaller
+ ones as Qt handles small paragraphs better. You could also
+ insert line breaks at regular intervals, which will look the
+ same as one large paragraph in a QTextEdit.
+ \o You can reduce the amount of blocks in a QTextDocument with
+ \l{QTextDocument::}{maximumBlockCount()}. The document is only
+ as large as the number of blocks as far as QTextEdit is concerned.
+ \o When adding text to a text edit, it is an advantage to add it
+ in an edit block (see example below). The result is that the
+ text edit does not need to build the entire document structure at once.
+ \endlist
+
+ We give an example of the latter technique from the list. We assume that
+ the text edit is visible.
+
+ \snippet doc/src/snippets/code/doc_src_richtext.qdoc 6
+
+ \omit
+ Ideas for other sections:
+
+ * Hiding QTextBlock elements.
+ * Changing the word wrapping mode in QTextEdit. Custom word wrapping?
+ \endomit
+*/
+
+/*!
+ \page richtext-html-subset.html
+ \title Supported HTML Subset
+ \brief Describes the support for HTML markup in text widgets.
+
+ \contentspage richtext.html Contents
+ \previouspage Common Rich Text Editing Tasks
+
+ Qt's text widgets are able to display rich text, specified using a subset of \l{HTML 4}
+ markup. Widgets that use QTextDocument, such as QLabel and QTextEdit, are able to display
+ rich text specified in this way.
+
+ \tableofcontents
+
+ \section1 Using HTML Markup in Text Widgets
+
+ Widgets automatically detect HTML markup and display rich text accordingly. For example,
+ setting a label's \l{QLabel::}{text} property with the string \c{"<b>Hello</b> <i>Qt!</i>"}
+ will result in the label displaying text like this: \bold{Hello} \e{Qt!}
+
+ When HTML markup is used for text, Qt follows the rules defined by the \l{HTML 4}
+ specification. This includes default properties for text layout, such as the
+ direction of the text flow (left-to-right) which can be changed by applying the
+ \l{#Block Attributes}{\c dir} attribute to blocks of text.
+
+ \section1 Supported Tags
+
+ The following table lists the HTML tags supported by Qt's
+ \l{Rich Text Processing}{rich text} engine:
+
+ \table
+ \header \o Tag
+ \o Description
+ \o Comment
+ \row \o \c a
+ \o Anchor or link
+ \o Supports the \c href and \c name attributes.
+ \row \o \c address
+ \o Address
+ \o
+ \row \o \c b
+ \o Bold
+ \o
+ \row \o \c big
+ \o Larger font
+ \o
+ \row \o \c blockquote
+ \o Indented paragraph
+ \o
+ \row \o \c body
+ \o Document body
+ \o Supports the \c bgcolor attribute, which
+ can be a Qt \l{QColor::setNamedColor()}{color name}
+ or a \c #RRGGBB color specification.
+ \row \o \c br
+ \o Line break
+ \o
+ \row \o \c center
+ \o Centered paragraph
+ \o
+ \row \o \c cite
+ \o Inline citation
+ \o Same as \c i.
+ \row \o \c code
+ \o Code
+ \o Same as \c tt.
+ \row \o \c dd
+ \o Definition data
+ \o
+ \row \o \c dfn
+ \o Definition
+ \o Same as \c i.
+ \row \o \c div
+ \o Document division
+ \o Supports the standard \l{block attributes}.
+ \row \o \c dl
+ \o Definition list
+ \o Supports the standard \l{block attributes}.
+ \row \o \c dt
+ \o Definition term
+ \o Supports the standard \l{block attributes}.
+ \row \o \c em
+ \o Emphasized
+ \o Same as \c i.
+ \row \o \c font
+ \o Font size, family, and/or color
+ \o Supports the following attributes:
+ \c size, \c face, and \c color (Qt
+ \l{QColor::setNamedColor()}{color names} or
+ \c #RRGGBB).
+ \row \o \c h1
+ \o Level 1 heading
+ \o Supports the standard \l{block attributes}.
+ \row \o \c h2
+ \o Level 2 heading
+ \o Supports the standard \l{block attributes}.
+ \row \o \c h3
+ \o Level 3 heading
+ \o Supports the standard \l{block attributes}.
+ \row \o \c h4
+ \o Level 4 heading
+ \o Supports the standard \l{block attributes}.
+ \row \o \c h5
+ \o Level 5 heading
+ \o Supports the standard \l{block attributes}.
+ \row \o \c h6
+ \o Level 6 heading
+ \o Supports the standard \l{block attributes}.
+ \row \o \c head
+ \o Document header
+ \o
+ \row \o \c hr
+ \o Horizontal line
+ \o Supports the \c width attribute, which can
+ be specified as an absolute or relative (\c %) value.
+ \row \o \c html
+ \o HTML document
+ \o
+ \row \o \c i
+ \o Italic
+ \o
+ \row \o \c img
+ \o Image
+ \o Supports the \c src, \c source
+ (for Qt 3 compatibility), \c width, and \c height
+ attributes.
+ \row \o \c kbd
+ \o User-entered text
+ \o
+ \row \o \c meta
+ \o Meta-information
+ \o If a text encoding is specified using the \c{meta} tag,
+ it is picked up by Qt::codecForHtml().
+ Likewise, if an encoding is specified to
+ QTextDocument::toHtml(), the encoding is stored using
+ a \c meta tag, for example:
+
+ \snippet doc/src/snippets/code/doc_src_richtext.qdoc 7
+
+ \row \o \c li
+ \o List item
+ \o
+ \row \o \c nobr
+ \o Non-breakable text
+ \o
+ \row \o \c ol
+ \o Ordered list
+ \o Supports the standard \l{list attributes}.
+ \row \o \c p
+ \o Paragraph
+ \o Left-aligned by default. Supports the standard
+ \l{block attributes}.
+ \row \o \c pre
+ \o Preformated text
+ \o
+ \row \o \c qt
+ \o Qt rich-text document
+ \o Synonym for \c html. Provided for compatibility with
+ earlier versions of Qt.
+ \row \o \c s
+ \o Strikethrough
+ \o
+ \row \o \c samp
+ \o Sample code
+ \o Same as \c tt.
+ \row \o \c small
+ \o Small font
+ \o
+ \row \o \c span
+ \o Grouped elements
+ \o
+ \row \o \c strong
+ \o Strong
+ \o Same as \c b.
+ \row \o \c sub
+ \o Subscript
+ \o
+ \row \o \c sup
+ \o Superscript
+ \o
+ \row \o \c table
+ \o Table
+ \o Supports the following attributes: \c border,
+ \c bgcolor (Qt \l{QColor::setNamedColor()}{color names}
+ or \c #RRGGBB), \c cellspacing, \c cellpadding,
+ \c width (absolute or relative), and \c height.
+ \row \o \c tbody
+ \o Table body
+ \o Does nothing.
+ \row \o \c td
+ \o Table data cell
+ \o Supports the standard \l{table cell attributes}.
+ \row \o \c tfoot
+ \o Table footer
+ \o Does nothing.
+ \row \o \c th
+ \o Table header cell
+ \o Supports the standard \l{table cell attributes}.
+ \row \o \c thead
+ \o Table header
+ \o If the \c thead tag is specified, it is used when printing tables
+ that span multiple pages.
+ \row \o \c title
+ \o Document title
+ \o The value specified using the \c
+ title tag is available through
+ QTextDocument::metaInformation().
+ \row \o \c tr
+ \o Table row
+ \o Supports the \c bgcolor attribute, which
+ can be a Qt \l{QColor::setNamedColor()}{color name}
+ or a \c #RRGGBB color specification.
+ \row \o \c tt
+ \o Typewrite font
+ \o
+ \row \o \c u
+ \o Underlined
+ \o
+ \row \o \c ul
+ \o Unordered list
+ \o Supports the standard \l{list attributes}.
+ \row \o \c var
+ \o Variable
+ \o Same as \c i.
+ \endtable
+
+ \section1 Block Attributes
+
+ The following attributes are supported by the \c div, \c dl, \c
+ dt, \c h1, \c h2, \c h3, \c h4, \c h5, \c h6, \c p tags:
+
+ \list
+ \o \c align (\c left, \c right, \c center, \c justify)
+ \o \c dir (\c ltr, \c rtl)
+ \endlist
+
+ \section1 List Attributes
+
+ The following attribute is supported by the \c ol and \c ul tags:
+
+ \list
+ \o \c type (\c 1, \c a, \c A, \c square, \c disc, \c circle)
+ \endlist
+
+ \section1 Table Cell Attributes
+
+ The following attributes are supported by the \c td and \c th
+ tags:
+
+ \list
+ \o \c width (absolute, relative, or no-value)
+ \o \c bgcolor (Qt \l{QColor::setNamedColor()}{color names} or \c #RRGGBB)
+ \o \c colspan
+ \o \c rowspan
+ \o \c align (\c left, \c right, \c center, \c justify)
+ \o \c valign (\c top, \c middle, \c bottom)
+ \endlist
+
+ \section1 CSS Properties
+ The following table lists the CSS properties supported by Qt's
+ \l{Rich Text Processing}{rich text} engine:
+
+ \table
+ \header \o Property
+ \o Values
+ \o Description
+ \row
+ \o \c background-color
+ \o <color>
+ \o Background color for elements
+ \row
+ \o \c background-image
+ \o <uri>
+ \o Background image for elements
+ \row \o \c color
+ \o <color>
+ \o Text foreground color
+ \row \o \c font-family
+ \o <family name>
+ \o Font family name
+ \row \o \c font-size
+ \o [ small | medium | large | x-large | xx-large ] | <size>pt | <size>px
+ \o Font size relative to the document font, or specified in points or pixels
+ \row \o \c font-style
+ \o [ normal | italic | oblique ]
+ \o
+ \row \o \c font-weight
+ \o [ normal | bold | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 ]
+ \o Specifies the font weight used for text, where \c normal and \c bold
+ are mapped to the corresponding QFont weights. Numeric values are
+ 8 times the equivalent QFont weight values.
+ \row \o \c text-decoration
+ \o none | [ underline || overline || line-through ]
+ \o Additional text effects
+ \row \o \c font
+ \o [ [ <'font-style'> || <'font-weight'> ]? <'font-size'> <'font-family'> ]
+ \o Font shorthand property
+ \row \o \c text-indent
+ \o <length>px
+ \o First line text indentation in pixels
+ \row \o \c white-space
+ \o normal | pre | nowrap | pre-wrap
+ \o Declares how whitespace in HTML is handled.
+ \row \o \c margin-top
+ \o <length>px
+ \o Top paragraph margin in pixels
+ \row \o \c margin-bottom
+ \o <length>px
+ \o Bottom paragraph margin in pixels
+ \row \o \c margin-left
+ \o <length>px
+ \o Left paragraph margin in pixels
+ \row \o \c margin-right
+ \o <length>px
+ \o Right paragraph margin in pixels
+ \row \o \c padding-top
+ \o <length>px
+ \o Top table cell padding in pixels
+ \row \o \c padding-bottom
+ \o <length>px
+ \o Bottom table cell padding in pixels
+ \row \o \c padding-left
+ \o <length>px
+ \o Left table cell padding in pixels
+ \row \o \c padding-right
+ \o <length>px
+ \o Right table cell padding in pixels
+ \row \o \c padding
+ \o <length>px
+ \o Shorthand for setting all the padding properties at once.
+ \row \o \c vertical-align
+ \o baseline | sub | super | middle | top | bottom
+ \o Vertical text alignment. For vertical alignment in text table cells only middle, top, and bottom apply.
+ \row \o \c border-color
+ \o <color>
+ \o Border color for text tables.
+ \row \o \c border-style
+ \o none | dotted | dashed | dot-dash | dot-dot-dash | solid | double | groove | ridge | inset | outset
+ \o Border style for text tables.
+ \row \o \c background
+ \o [ <'background-color'> || <'background-image'> ]
+ \o Background shorthand property
+ \row \o \c page-break-before
+ \o [ auto | always ]
+ \o Make it possible to enforce a page break before the paragraph/table
+ \row \o \c page-break-after
+ \o [ auto | always ]
+ \o Make it possible to enforce a page break after the paragraph/table
+ \row \o float
+ \o [ left | right | none ]
+ \o Specifies where an image or a text will be placed in another element. Note that the \c float property is
+ only supported for tables and images.
+ \row \o \c text-transform
+ \o [ uppercase | lowercase ]
+ \o Select the transformation that will be performed on the text prior to displaying it.
+ \row \o \c font-variant
+ \o small-caps
+ \o Perform the smallcaps transformation on the text prior to displaying it.
+ \row \o \c word-spacing
+ \o <width>px
+ \o Specifies an alternate spacing between each word.
+ \endtable
+
+ \section1 Supported CSS Selectors
+
+ All CSS 2.1 selector classes are supported except pseudo-class selectors such
+ as \c{:first-child}, \c{:visited} and \c{:hover}.
+
+*/