summaryrefslogtreecommitdiffstats
path: root/doc/src/sql-programming/sql-driver.qdoc
diff options
context:
space:
mode:
Diffstat (limited to 'doc/src/sql-programming/sql-driver.qdoc')
-rw-r--r--doc/src/sql-programming/sql-driver.qdoc762
1 files changed, 762 insertions, 0 deletions
diff --git a/doc/src/sql-programming/sql-driver.qdoc b/doc/src/sql-programming/sql-driver.qdoc
new file mode 100644
index 0000000..832fd0c
--- /dev/null
+++ b/doc/src/sql-programming/sql-driver.qdoc
@@ -0,0 +1,762 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at http://qt.nokia.com/contact.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+ \page sql-driver.html
+ \title SQL Database Drivers
+ \brief How to configure and install QtSql drivers for supported databases.
+
+ \ingroup best-practices
+
+ The QtSql module uses driver \l{How to Create Qt
+ Plugins}{plugins} to communicate with the different database
+ APIs. Since Qt's SQL Module API is database-independent, all
+ database-specific code is contained within these drivers. Several
+ drivers are supplied with Qt and other drivers can be added. The
+ driver source code is supplied and can be used as a model for
+ \l{#development}{writing your own drivers}.
+
+ \tableofcontents
+
+ \section1 Supported Databases
+
+ The table below lists the drivers included with Qt. Due to
+ license incompatibilities with the GPL, not all of the plugins
+ are provided with Open Source Versions of Qt.
+
+ \table
+ \header \o Driver name \o DBMS
+ \row \o \link #QDB2 QDB2\endlink \o IBM DB2 (version 7.1 and above)
+ \row \o \link #QIBASE QIBASE\endlink \o Borland InterBase
+ \row \o \link #QMYSQL QMYSQL\endlink \o MySQL
+ \row \o \link #QOCI QOCI\endlink \o Oracle Call Interface Driver
+ \row \o \link #QODBC QODBC\endlink
+ \o Open Database Connectivity (ODBC) - Microsoft SQL Server and other
+ ODBC-compliant databases
+ \row \o \link #QPSQL QPSQL\endlink \o PostgreSQL (versions 7.3 and above)
+ \row \o \link #QSQLITE2 QSQLITE2\endlink \o SQLite version 2
+ \row \o \link #QSQLITE QSQLITE\endlink \o SQLite version 3
+ \row \o \link #QTDS QTDS\endlink \o Sybase Adaptive Server
+ \endtable
+
+ \bold{Note:} To build a driver plugin you need to have the appropriate
+ client library for your Database Management System (DBMS). This provides
+ access to the API exposed by the DBMS, and is typically shipped with it.
+ Most installation programs also allow you to install "development
+ libraries", and these are what you need. These libraries are responsible
+ for the low-level communication with the DBMS.
+
+ \target building
+ \section1 Building the Drivers Using Configure
+
+ On Unix and Mac OS X, the Qt \c configure script tries to
+ automatically detect the available client libraries on your
+ machine. Run \c{configure -help} to see what drivers can be
+ built. You should get an output similar to this:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 0
+
+ The \c configure script cannot detect the neccessary libraries
+ and include files if they are not in the standard paths, so it
+ may be necessary to specify these paths using the \c -I and \c -L
+ command-line options. For example, if your MySQL include files
+ are installed in \c /usr/local/mysql (or in \c{C:\mysql\include}
+ on Windows), then pass the following parameter to configure: \c
+ -I/usr/local/mysql (or \c{-I C:\mysql\include} for Windows).
+
+ On Windows the \c -I parameter doesn't accept spaces in
+ filenames, so use the 8.3 name instead; for example, use
+ \c{C:\progra~1\mysql} instead of \c{C:\Program Files\mysql}.
+
+ Use the \c{-qt-sql-<driver>} parameter to build the database driver
+ statically into your Qt library or \c{-plugin-sql-<driver>} to build
+ the driver as a plugin. Look at the sections that follow for
+ additional information about required libraries.
+
+ \target buildingmanually
+ \section1 Building the Plugins Manually
+
+ \target QMYSQL
+ \section2 QMYSQL for MySQL 4 and higher
+
+ \section3 QMYSQL Stored Procedure Support
+
+ MySQL 5 introduces stored procedure support at the SQL level, but no
+ API to control IN, OUT and INOUT parameters. Therefore, parameters
+ have to be set and read using SQL commands instead of QSqlQuery::bindValue().
+
+ Example stored procedure:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 1
+
+ Source code to access the OUT values:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 2
+
+ \bold{Note:} \c{@outval1} and \c{@outval2} are variables local to the current
+ connection and will not be affected by queries sent from another host
+ or connection.
+
+ \section3 Embedded MySQL Server
+
+ The MySQL embedded server is a drop-in replacement for the normal
+ client library. With the embedded MySQL server, a MySQL server is
+ not required to use MySQL functionality.
+
+ To use the embedded MySQL server, simply link the Qt plugin to \c
+ libmysqld instead of libmysqlclient. This can be done by replacing
+ \c -lmysqlclient_r by \c -lmysqld in the \c qmake command in the
+ section below.
+
+ Please refer to the MySQL documentation, chapter "libmysqld, the Embedded
+ MySQL Server Library" for more information about the MySQL embedded server.
+
+ \section3 How to Build the QMYSQL Plugin on Unix and Mac OS X
+
+ You need the MySQL header files and as well as the shared library
+ \c{libmysqlclient.so}. Depending on your Linux distribution you may
+ need to install a package which is usually called "mysql-devel".
+
+ Tell \l qmake where to find the MySQL header files and shared
+ libraries (here it is assumed that MySQL is installed in
+ \c{/usr/local}) and run \c{make}:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 3
+
+ After installing Qt, as described in the \l{Installing Qt on X11
+ Platforms} document, you also need to install the plugin in the
+ standard location:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 4
+
+ \section3 How to Build the QMYSQL Plugin on Windows
+
+ You need to get the MySQL installation files. Run \c SETUP.EXE and
+ choose "Custom Install". Install the "Libs & Include Files" Module.
+ Build the plugin as follows (here it is assumed that MySQL is
+ installed in \c{C:\MySQL}):
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 5
+
+ If you are not using a Microsoft compiler, replace \c nmake with \c
+ make in the line above.
+
+ \note This database plugin is not supported for Windows CE.
+
+ \note Including \c{"-o Makefile"} as an argument to \l qmake to
+ tell it where to build the makefile can cause the plugin to be
+ built in release mode only. If you are expecting a debug version
+ to be built as well, don't use the \c{"-o Makefile"} option.
+
+ \target QOCI
+ \section2 QOCI for the Oracle Call Interface (OCI)
+
+ \section3 General Information about the OCI plugin
+
+ The Qt OCI plugin supports Oracle 9i, 10g and higher. After
+ connecting to the Oracle server, the plugin will auto-detect the
+ database version and enable features accordingly.
+
+ It's possible to connect to a Oracle database without a tnsnames.ora file.
+ This requires that the database SID is passed to the driver as the database
+ name and that a hostname is given.
+
+ \section3 OCI User Authentication
+
+ The Qt OCI plugin supports authentication using
+ external credentials (OCI_CRED_EXT). Usually, this means that the database
+ server will use the user authentication provided by the operating system
+ instead of its own authentication mechanism.
+
+ Leave the username and password empty when opening a connection with
+ QSqlDatabase to use the external credentials authentication.
+
+ \section3 OCI BLOB/LOB Support
+
+ Binary Large Objects (BLOBs) can be read and written, but be aware
+ that this process may require a lot of memory. You should use a forward
+ only query to select LOB fields (see QSqlQuery::setForwardOnly()).
+
+ Inserting BLOBs should be done using either a prepared query where the
+ BLOBs are bound to placeholders or QSqlTableModel, which uses a prepared
+ query to do this internally.
+
+ \section3 How to Build the OCI Plugin on Unix and Mac OS X
+
+ For Oracle 10g, all you need is the "Instant Client Package - Basic" and
+ "Instant Client Package - SDK". For Oracle prior to 10g, you require
+ the standard Oracle client and the SDK packages.
+
+ Oracle library files required to build the driver:
+
+ \list
+ \i \c libclntsh.so (all versions)
+ \i \c libwtc9.so (only Oracle 9)
+ \endlist
+
+ Tell \c qmake where to find the Oracle header files and shared
+ libraries and run make:
+
+ For Oracle version 9:
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 6
+
+ For Oracle version 10, we assume that you installed the RPM packages of the
+ Instant Client Package SDK (you need to adjust the version number accordingly):
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 7
+
+ \bold{Note:} If you are using the Oracle Instant Client package,
+ you will need to set LD_LIBRARY_PATH when building the OCI SQL plugin
+ and when running an applicaiton that uses the OCI SQL plugin. You can
+ avoid this requirement by setting and RPATH and listing all of the
+ libraries to link to. Here is an example:
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 32
+
+ If you wish to build the OCI plugin manually with this method the procedure looks like this:
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 33
+
+ \section3 How to Build the OCI Plugin on Windows
+
+ Choosing the option "Programmer" in the Oracle Client Installer from
+ the Oracle Client Installation CD is sufficient to build the plugin.
+
+ Build the plugin as follows (here it is assumed that Oracle Client is
+ installed in \c{C:\oracle}):
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 8
+
+ If you are not using a Microsoft compiler, replace \c nmake with \c
+ make in the line above.
+
+ When you run your application you will also need to add the \c oci.dll
+ path to your \c PATH environment variable:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 9
+
+ \bold{Note:} This database plugin is not supported for Windows CE.
+
+ \target QODBC
+ \section2 QODBC for Open Database Connectivity (ODBC)
+
+ \section3 General Information about the ODBC plugin
+
+ ODBC is a general interface that allows you to connect to multiple
+ DBMSs using a common interface. The QODBC driver allows you to connect
+ to an ODBC driver manager and access the available data sources. Note
+ that you also need to install and configure ODBC drivers for the ODBC
+ driver manager that is installed on your system. The QODBC plugin
+ then allows you to use these data sources in your Qt applications.
+
+ \bold{Note:} You should use native drivers in preference to the ODBC
+ driver where they are available. ODBC support can be used as a fallback
+ for compliant databases if no native drivers are available.
+
+ On Windows an ODBC driver manager should be installed by default.
+ For Unix systems there are some implementations which must be
+ installed first. Note that every client that uses your application is
+ required to have an ODBC driver manager installed, otherwise the
+ QODBC plugin will not work.
+
+ Be aware that when connecting to an ODBC datasource you must pass in
+ the name of the ODBC datasource to the QSqlDatabase::setDatabaseName()
+ function rather than the actual database name.
+
+ The QODBC Plugin needs an ODBC compliant driver manager version 2.0 or
+ later to work. Some ODBC drivers claim to be version 2.0 compliant,
+ but do not offer all the necessary functionality. The QODBC plugin
+ therefore checks whether the data source can be used after a
+ connection has been established and refuses to work if the check
+ fails. If you don't like this behavior, you can remove the \c{#define
+ ODBC_CHECK_DRIVER} line from the file \c{qsql_odbc.cpp}. Do this at
+ your own risk!
+
+ By default, Qt instructs the ODBC driver to behave as an ODBC 2.x
+ driver. However, for some \e{driver-manager/ODBC 3.x-driver}
+ combinations (e.g., \e{unixODBC/MaxDB ODBC}), telling the ODBC
+ driver to behave as a 2.x driver can cause the driver plugin to
+ have unexpected behavior. To avoid this problem, instruct the ODBC
+ driver to behave as a 3.x driver by
+ \l{QSqlDatabase::setConnectOptions()} {setting the connect option}
+ \c{"SQL_ATTR_ODBC_VERSION=SQL_OV_ODBC3"} before you
+ \l{QSqlDatabase::open()} {open your database connection}. Note
+ that this will affect multiple aspects of ODBC driver behavior,
+ e.g., the SQLSTATEs. Before setting this connect option, consult
+ your ODBC documentation about behavior differences you can expect.
+
+ If you experience very slow access of the ODBC datasource, make sure
+ that ODBC call tracing is turned off in the ODBC datasource manager.
+
+ Some drivers don't support scrollable cursors. In that case case only
+ queries in forwardOnly mode can be used successfully.
+
+ \section3 ODBC Stored Procedure Support
+
+ With Microsoft SQL Server the result set returned by a stored
+ procedure that uses the return statement, or returns multiple result
+ sets, will be accessible only if you set the query's forward only
+ mode to \e forward using \l QSqlQuery::setForwardOnly().
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 10
+
+ \bold{Note:} The value returned by the stored procedure's return statement
+ is discarded.
+
+ \section3 ODBC Unicode Support
+
+ The QODBC Plugin will use the Unicode API if UNICODE is defined. On
+ Windows NT based systems, this is the default. Note that the ODBC
+ driver and the DBMS must also support Unicode.
+
+ Some driver managers and drivers don't support UNICODE. To use the
+ QODBC plugin with such drivers it has to be compiled with the
+ Q_ODBC_VERSION_2 defined.
+
+ For the Oracle 9 ODBC driver (Windows), it is neccessary to check
+ "SQL_WCHAR support" in the ODBC driver manager otherwise Oracle
+ will convert all Unicode strings to local 8-bit.
+
+ \section3 How to Build the ODBC Plugin on Unix and Mac OS X
+
+ It is recommended that you use unixODBC. You can find the latest
+ version and ODBC drivers at \l http://www.unixodbc.org.
+ You need the unixODBC header files and shared libraries.
+
+ Tell \c qmake where to find the unixODBC header files and shared
+ libraries (here it is assumed that unixODBC is installed in
+ \c{/usr/local/unixODBC}) and run \c{make}:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 11
+
+ \section3 How to Build the ODBC Plugin on Windows
+
+ The ODBC header and include files should already be installed in the
+ right directories. You just have to build the plugin as follows:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 12
+
+ If you are not using a Microsoft compiler, replace \c nmake with \c
+ make in the line above.
+
+ \bold{Note:} This database plugin is not officially supported for Windows CE.
+
+ \target QPSQL
+ \section2 QPSQL for PostgreSQL (Version 7.3 and Above)
+
+ \section3 General Information about the QPSQL driver
+
+ The QPSQL driver supports version 7.3 and higher of the PostgreSQL server.
+ We recommend that you use a client library from version 7.3.15, 7.4.13,
+ 8.0.8, 8.1.4 or more recent as these versions contain security fixes, and
+ as the QPSQL driver might not build with older versions of the client
+ library depending on your platform.
+
+ For more information about PostgreSQL visit \l http://www.postgresql.org.
+
+ \section3 QPSQL Unicode Support
+
+ The QPSQL driver automatically detects whether the PostgreSQL
+ database you are connecting to supports Unicode or not. Unicode is
+ automatically used if the server supports it. Note that the driver
+ only supports the UTF-8 encoding. If your database uses any other
+ encoding, the server must be compiled with Unicode conversion
+ support.
+
+ Unicode support was introduced in PostgreSQL version 7.1 and it will
+ only work if both the server and the client library have been compiled
+ with multibyte support. More information about how to set up a
+ multibyte enabled PostgreSQL server can be found in the PostgreSQL
+ Administrator Guide, Chapter 5.
+
+ \section3 QPSQL BLOB Support
+
+ Binary Large Objects are supported through the \c BYTEA field type in
+ PostgreSQL server versions >= 7.1.
+
+ \section3 How to Build the QPSQL Plugin on Unix and Mac OS X
+
+ You need the PostgreSQL client library and headers installed.
+
+ To make \c qmake find the PostgreSQL header files and shared
+ libraries, run \c qmake the following way (assuming that the
+ PostgreSQL client is installed in \c{/usr}):
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 13
+
+ After installing Qt, as described in the \l{Installing Qt on X11 Platforms} document,
+ you also need to install the plugin in the standard location:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 14
+
+ \section3 How to Build the QPSQL Plugin on Windows
+
+ Install the appropriate PostgreSQL developer libraries for your
+ compiler. Assuming that PostgreSQL was installed in \c{C:\psql},
+ build the plugin as follows:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 15
+
+ Users of MinGW may wish to consult the following online document:
+ \l{Compiling PostgreSQL On Native Win32 FAQ}.
+
+ \bold{Note:} This database plugin is not supported for Windows CE.
+
+ \target QTDS
+ \section2 QTDS for Sybase Adaptive Server
+ \section3 General Information about QTDS
+
+ It is not possible to set the port with QSqlDatabase::setPort() due to limitations in the
+ Sybase client library. Refer to the Sybase documentation for information on how to set up
+ a Sybase client configuration file to enable connections to databases on non-default ports.
+
+ \section3 How to Build the QDTS Plugin on Unix and Mac OS X
+
+ Under Unix, two libraries are available which support the TDS protocol:
+
+ \list
+ \i FreeTDS, a free implementation of the TDS protocol
+ (\l{http://www.freetds.org}). Note that FreeTDS is not yet stable,
+ so some functionality may not work as expected.
+
+ \i Sybase Open Client, available from \l{http://www.sybase.com}.
+ Note for Linux users: Get the Open Client RPM from
+ \l{http://linux.sybase.com}.
+ \endlist
+
+ Regardless of which library you use, the shared object file
+ \c{libsybdb.so} is needed. Set the \c SYBASE environment variable to
+ point to the directory where you installed the client library and
+ execute \c{qmake}:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 16
+
+ \section3 How to Build the QDTS Plugin on Windows
+
+ You can either use the DB-Library supplied by Microsoft or the Sybase
+ Open Client (\l{http://www.sybase.com}). You must include \c
+ NTWDBLIB.LIB to build the plugin:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 17
+
+ By default the Microsoft library is used on Windows, if you want to
+ force the use of the Sybase Open Client, you must define \c
+ Q_USE_SYBASE in \c{%QTDIR%\src\sql\drivers\tds\qsql_tds.cpp}. If you
+ are not using a Microsoft compiler, replace \c nmake with \c make in
+ the line above.
+
+ \bold{Note:} This database plugin is not supported for Windows CE.
+
+ \target QDB2
+ \section2 QDB2 for IBM DB2 (Version 7.1 and Above)
+
+ \section3 General Information about QDB2
+
+ The Qt DB2 plugin makes it possible to access IBM DB2 databases. It
+ has been tested with IBM DB2 v7.1 and 7.2. You must install the IBM
+ DB2 development client library, which contains the header and library
+ files necessary for compiling the QDB2 plugin.
+
+ The QDB2 driver supports prepared queries, reading/writing of Unicode
+ strings and reading/writing of BLOBs.
+
+ We suggest using a forward-only query when calling stored procedures
+ in DB2 (see QSqlQuery::setForwardOnly()).
+
+ \section3 How to Build the QDB2 Plugin on Unix and Mac OS X
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 18
+
+ After installing Qt, as described in the \l{Installing Qt on X11 Platforms} document,
+ you also need to install the plugin in the standard location:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 19
+
+ \section3 How to Build the QDB2 Plugin on Windows
+
+ The DB2 header and include files should already be installed in the
+ right directories. You just have to build the plugin as follows:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 20
+
+ If you are not using a Microsoft compiler, replace \c nmake
+ with \c make in the line above.
+
+ \bold{Note:} This database plugin is not supported for Windows CE.
+
+ \target QSQLITE2
+ \section2 QSQLITE2 for SQLite Version 2
+
+ The Qt SQLite 2 plugin is offered for compatibility. Whenever
+ possible, use the \l{#QSQLITE}{version 3 plugin} instead. The
+ build instructions for version 3 apply to version 2 as well.
+
+ \target QSQLITE
+ \section2 QSQLITE for SQLite (Version 3 and Above)
+
+ \section3 General Information about QSQLITE
+
+ The Qt SQLite plugin makes it possible to access SQLite
+ databases. SQLite is an in-process database, which means that it
+ is not necessary to have a database server. SQLite operates on a
+ single file, which must be set as the database name when opening
+ a connection. If the file does not exist, SQLite will try to
+ create it. SQLite also supports in-memory databases, simply pass
+ ":memory:" as the database name.
+
+ SQLite has some restrictions regarding multiple users and
+ multiple transactions. If you try to read/write on a resource from different
+ transactions, your application might freeze until one transaction commits
+ or rolls back. The Qt SQLite driver will retry to write to a locked resource
+ until it runs into a timeout (see \c{QSQLITE_BUSY_TIMEOUT}
+ at QSqlDatabase::setConnectOptions()).
+
+ In SQLite any column, with the exception of an INTEGER PRIMARY KEY column,
+ may be used to store any type of value. For instance, a column declared as
+ INTEGER may contain an integer value in one row and a text value in the
+ next. This is due to SQLite associating the type of a value with the value
+ itself rather than with the column it is stored in. A consequence of this
+ is that the type returned by QSqlField::type() only indicates the field's
+ recommended type. No assumption of the actual type should be made from
+ this and the type of the individual values should be checked.
+
+ The driver is locked for updates while a select is executed. This
+ may cause problems when using QSqlTableModel because Qt's item views
+ fetch data as needed (with QSqlQuery::fetchMore() in the case of
+ QSqlTableModel).
+
+ You can find information about SQLite on \l{http://www.sqlite.org}.
+
+ \section3 How to Build the QSQLITE Plugin
+
+ SQLite version 3 is included as a third-party library within Qt.
+ It can be built by passing the following parameters to the
+ configure script: \c{-plugin-sql-sqlite} (build as a plugin) or
+ \c{-qt-sql-sqlite} (linked directly into the Qt library).
+
+ If you don't want to use the SQLite library included with Qt, you
+ can build it manually (replace \c $SQLITE by the directory where
+ SQLite resides):
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 21
+
+ After installing Qt, as described in the \l{Installing Qt on X11 Platforms} document,
+ you also need to install the plugin in the standard location:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 22
+
+ On Windows:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 23
+
+ \section3 QSQLITE File Format Compatibility
+
+ SQLite minor releases sometimes break file format forward compatibility.
+ For example, SQLite 3.3 can read database files created with SQLite 3.2,
+ but databases created with SQLite 3.3 cannot be read by SQLite 3.2.
+ Please refer to the SQLite documentation and change logs for information about
+ file format compatibility between versions.
+
+ Qt minor releases usually follow the SQLite minor releases, while Qt patch releases
+ follow SQLite patch releases. Patch releases are therefore both backward and forward
+ compatible.
+
+ To force SQLite to use a specific file format, it is neccessary to build and
+ ship your own database plugin with your own SQLite library as illustrated above.
+ Some versions of SQLite can be forced to write a specific file format by setting
+ the \c{SQLITE_DEFAULT_FILE_FORMAT} define when building SQLite.
+
+ \target QIBASE
+ \section2 QIBASE for Borland InterBase
+
+ \section3 General Information about QIBASE
+
+ The Qt InterBase plugin makes it possible to access the InterBase and
+ Firebird databases. InterBase can either be used as a client/server or
+ without a server in which case it operates on local files. The
+ database file must exist before a connection can be established.
+
+ Note that InterBase requires you to specify the full path to the
+ database file, no matter whether it is stored locally or on another
+ server.
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 24
+
+ You need the InterBase/Firebird development headers and libraries
+ to build this plugin.
+
+ Due to license incompatibilities with the GPL, users of the Qt Open Source
+ Edition are not allowed to link this plugin to the commercial editions of
+ InterBase. Please use Firebird or the free edition of InterBase.
+
+ \section3 QIBASE Unicode Support and Text Encoding
+
+ By default the driver connects to the database using UNICODE_FSS. This can
+ be overridden by setting the ISC_DPB_LC_CTYPE parameter with
+ QSqlDatabase::setConnectOptions() before opening the connection.
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 25
+
+ If Qt doesn't support the given text encoding the driver will issue a
+ warning message and connect to the database using UNICODE_FSS.
+
+ Note that if the text encoding set when connecting to the database is
+ not the same as in the database, problems with transliteration might arise.
+
+ \section3 QIBASE Stored procedures
+
+ InterBase/Firebird return OUT values as result set, so when calling stored
+ procedure, only IN values need to be bound via QSqlQuery::bindValue(). The
+ RETURN/OUT values can be retrieved via QSqlQuery::value(). Example:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 26
+
+ \section3 How to Build the QIBASE Plugin on Unix and Mac OS X
+
+ The following assumes InterBase or Firebird is installed in
+ \c{/opt/interbase}:
+
+ If you are using InterBase:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 27
+
+ If you are using Firebird, the Firebird library has to be set explicitly:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 28
+
+ \section3 How to Build the QIBASE Plugin on Windows
+
+ The following assumes InterBase or Firebird is installed in
+ \c{C:\interbase}:
+
+ If you are using InterBase:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 29
+
+ If you are using Firebird, the Firebird library has to be set explicitely:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 30
+
+ If you are not using a Microsoft compiler, replace \c nmake
+ with \c make in the line above.
+
+ Note that \c{C:\interbase\bin} must be in the \c PATH.
+
+ \bold{Note:} This database plugin is not supported for Windows CE.
+
+ \target troubleshooting
+ \section1 Troubleshooting
+
+ You should always use client libraries that have been compiled with
+ the same compiler as you are using for your project. If you cannot get
+ a source distibution to compile the client libraries yourself, you
+ must make sure that the pre-compiled library is compatible with
+ your compiler, otherwise you will get a lot of "undefined symbols"
+ errors. Some compilers have tools to convert libraries, e.g. Borland
+ ships the tool \c{COFF2OMF.EXE} to convert libraries that have been
+ generated with Microsoft Visual C++.
+
+ If the compilation of a plugin succeeds but it cannot be loaded,
+ make sure that the following requirements are met:
+
+ \list
+ \i Ensure that you are using a shared Qt library; you cannot use the
+ plugins with a static build.
+ \i Ensure that the plugin is in the correct directory. You can use
+ QApplication::libraryPaths() to determine where Qt looks for plugins.
+ \i Ensure that the client libraries of the DBMS are available on the
+ system. On Unix, run the command \c{ldd} and pass the name of the
+ plugin as parameter, for example \c{ldd libqsqlmysql.so}. You will
+ get a warning if any of the client libraries couldn't be found.
+ On Windows, you can use Visual Studio's dependency walker.
+ \i Compile Qt with \c{QT_DEBUG_COMPONENT} defined to get very verbose
+ debug output when loading plugins.
+ \endlist
+
+ Make sure you have followed the guide to \l{Deploying Plugins}.
+ If you experience plugin load problems and see output like this:
+
+ \snippet doc/src/snippets/code/doc_src_sql-driver.qdoc 31
+
+ the problem is usually that the plugin had the wrong \l{Deploying
+ Plugins#The Build Key}{build key}. This might require removing an
+ entry from the \l{Deploying Plugins#The Plugin Cache} {plugin cache}.
+
+ \target development
+ \section1 How to Write Your Own Database Driver
+
+ QSqlDatabase is responsible for loading and managing database driver
+ plugins. When a database is added (see QSqlDatabase::addDatabase()),
+ the appropriate driver plugin is loaded (using QSqlDriverPlugin).
+ QSqlDatabase relies on the driver plugin to provide interfaces for
+ QSqlDriver and QSqlResult.
+
+ QSqlDriver is an abstract base class which defines the functionality
+ of a SQL database driver. This includes functions such as
+ QSqlDriver::open() and QSqlDriver::close(). QSqlDriver is responsible
+ for connecting to a database, establish the proper environment, etc.
+ In addition, QSqlDriver can create QSqlQuery objects appropriate for
+ the particular database API. QSqlDatabase forwards many of its
+ function calls directly to QSqlDriver which provides the concrete
+ implementation.
+
+ QSqlResult is an abstract base class which defines the functionality
+ of a SQL database query. This includes statements such as \c{SELECT},
+ \c{UPDATE}, and \c{ALTER} \c{TABLE}. QSqlResult contains functions
+ such as QSqlResult::next() and QSqlResult::value(). QSqlResult is
+ responsible for sending queries to the database, returning result
+ data, etc. QSqlQuery forwards many of its function calls directly to
+ QSqlResult which provides the concrete implementation.
+
+ QSqlDriver and QSqlResult are closely connected. When implementing a
+ Qt SQL driver, both of these classes must to be subclassed and the
+ abstract virtual methods in each class must be implemented.
+
+ To implement a Qt SQL driver as a plugin (so that it is
+ recognized and loaded by the Qt library at runtime), the driver
+ must use the Q_EXPORT_PLUGIN2() macro. Read \l{How to Create Qt
+ Plugins} for more information on this. You can also check out how
+ this is done in the SQL plugins that are provided with Qt in
+ \c{QTDIR/src/plugins/sqldrivers} and \c{QTDIR/src/sql/drivers}.
+
+ The following code can be used as a skeleton for a SQL driver:
+
+ \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 47
+ \codeline
+ \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 48
+*/