summaryrefslogtreecommitdiffstats
path: root/doc/src/widgets-and-layouts/layout.qdoc
diff options
context:
space:
mode:
Diffstat (limited to 'doc/src/widgets-and-layouts/layout.qdoc')
-rw-r--r--doc/src/widgets-and-layouts/layout.qdoc396
1 files changed, 396 insertions, 0 deletions
diff --git a/doc/src/widgets-and-layouts/layout.qdoc b/doc/src/widgets-and-layouts/layout.qdoc
new file mode 100644
index 0000000..4622301
--- /dev/null
+++ b/doc/src/widgets-and-layouts/layout.qdoc
@@ -0,0 +1,396 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at http://qt.nokia.com/contact.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+ \group geomanagement
+ \title Layout Classes
+*/
+
+/*!
+ \page layout.html
+ \title Layout Management
+ \brief A tour of the standard layout managers and an introduction to custom
+ layouts.
+
+ \previouspage Widget Classes
+ \contentspage Widgets and Layouts
+ \nextpage {Implementing Styles and Style Aware Widgets}{Styles}
+
+ \ingroup frameworks-technologies
+
+ The Qt layout system provides a simple and powerful way of automatically
+ arranging child widgets within a widget to ensure that they make good use
+ of the available space.
+
+ \tableofcontents
+
+ \section1 Introduction
+
+ Qt includes a set of layout management classes that are used to describe
+ how widgets are laid out in an application's user interface. These layouts
+ automatically position and resize widgets when the amount of space
+ available for them changes, ensuring that they are consistently arranged
+ and that the user interface as a whole remains usable.
+
+ All QWidget subclasses can use layouts to manage their children. The
+ QWidget::setLayout() function applies a layout to a widget. When a layout
+ is set on a widget in this way, it takes charge of the following tasks:
+
+ \list
+ \o Positioning of child widgets.
+ \o Sensible default sizes for windows.
+ \o Sensible minimum sizes for windows.
+ \o Resize handling.
+ \o Automatic updates when contents change:
+ \list
+ \o Font size, text or other contents of child widgets.
+ \o Hiding or showing a child widget.
+ \o Removal of child widgets.
+ \endlist
+ \endlist
+
+ \section1 Qt's Layout Classes
+
+ Qt's layout classes were designed for hand-written C++ code, allowing
+ measurements to be specified in pixels for simplicity, so they are easy to
+ understand and use. The code generated for forms created using \QD also
+ uses the layout classes. \QD is useful to use when experimenting with the
+ design of a form since it avoids the compile, link and run cycle usually
+ involved in user interface development.
+
+ \annotatedlist geomanagement
+
+ \section1 Horizontal, Vertical, Grid, and Form Layouts
+
+ The easiest way to give your widgets a good layout is to use the built-in
+ layout managers: QHBoxLayout, QVBoxLayout, QGridLayout, and QFormLayout.
+ These classes inherit from QLayout, which in turn derives from QObject (not
+ QWidget). They take care of geometry management for a set of widgets. To
+ create more complex layouts, you can nest layout managers inside each other.
+
+ \list
+ \o A QHBoxLayout lays out widgets in a horizontal row, from left to
+ right (or right to left for right-to-left languages).
+ \image qhboxlayout-with-5-children.png
+
+ \o A QVBoxLayout lays out widgets in a vertical column, from top to
+ bottom.
+ \image qvboxlayout-with-5-children.png
+
+ \o A QGridLayout lays out widgets in a two-dimensional grid. Widgets
+ can occupy multiple cells.
+ \image qgridlayout-with-5-children.png
+
+ \o A QFormLayout lays out widgets in a 2-column descriptive label-
+ field style.
+ \image qformlayout-with-6-children.png
+ \endlist
+
+
+ \section2 Laying Out Widgets in Code
+
+ The following code creates a QHBoxLayout that manages the geometry of five
+ \l{QPushButton}s, as shown on the first screenshot above:
+
+ \snippet doc/src/snippets/layouts/layouts.cpp 0
+ \snippet doc/src/snippets/layouts/layouts.cpp 1
+ \snippet doc/src/snippets/layouts/layouts.cpp 2
+ \codeline
+ \snippet doc/src/snippets/layouts/layouts.cpp 3
+ \snippet doc/src/snippets/layouts/layouts.cpp 4
+ \snippet doc/src/snippets/layouts/layouts.cpp 5
+
+ The code for QVBoxLayout is identical, except the line where the layout is
+ created. The code for QGridLayout is a bit different, because we need to
+ specify the row and column position of the child widget:
+
+ \snippet doc/src/snippets/layouts/layouts.cpp 12
+ \snippet doc/src/snippets/layouts/layouts.cpp 13
+ \snippet doc/src/snippets/layouts/layouts.cpp 14
+ \codeline
+ \snippet doc/src/snippets/layouts/layouts.cpp 15
+ \snippet doc/src/snippets/layouts/layouts.cpp 16
+ \snippet doc/src/snippets/layouts/layouts.cpp 17
+
+ The third QPushButton spans 2 columns. This is possible by specifying 2 as
+ the fifth argument to QGridLayout::addWidget().
+
+ Finally, the code for QFormLayout is ..
+
+
+ \section2 Tips for Using Layouts
+
+ When you use a layout, you do not need to pass a parent when constructing
+ the child widgets. The layout will automatically reparent the widgets
+ (using QWidget::setParent()) so that they are children of the widget on
+ which the layout is installed.
+
+ \note Widgets in a layout are children of the widget on which the layout
+ is installed, \e not of the layout itself. Widgets can only have other
+ widgets as parent, not layouts.
+
+ You can nest layouts using \c addLayout() on a layout; the inner layout
+ then becomes a child of the layout it is inserted into.
+
+
+ \section1 Adding Widgets to a Layout
+
+ When you add widgets to a layout, the layout process works as follows:
+
+ \list 1
+ \o All the widgets will initially be allocated an amount of space in
+ accordance with their QWidget::sizePolicy() and
+ QWidget::sizeHint().
+
+ \o If any of the widgets have stretch factors set, with a value
+ greater than zero, then they are allocated space in proportion to
+ their stretch factor (explained below).
+
+ \o If any of the widgets have stretch factors set to zero they will
+ only get more space if no other widgets want the space. Of these,
+ space is allocated to widgets with an
+ \l{QSizePolicy::Expanding}{Expanding} size policy first.
+
+ \o Any widgets that are allocated less space than their minimum size
+ (or minimum size hint if no minimum size is specified) are
+ allocated this minimum size they require. (Widgets don't have to
+ have a minimum size or minimum size hint in which case the strech
+ factor is their determining factor.)
+
+ \o Any widgets that are allocated more space than their maximum size
+ are allocated the maximum size space they require. (Widgets do not
+ have to have a maximum size in which case the strech factor is
+ their determining factor.)
+ \endlist
+
+
+ \section2 Stretch Factors
+ \keyword stretch factor
+
+ Widgets are normally created without any stretch factor set. When they are
+ laid out in a layout the widgets are given a share of space in accordance
+ with their QWidget::sizePolicy() or their minimum size hint whichever is
+ the greater. Stretch factors are used to change how much space widgets are
+ given in proportion to one another.
+
+ If we have three widgets laid out using a QHBoxLayout with no stretch
+ factors set we will get a layout like this:
+
+ \img layout1.png Three widgets in a row
+
+ If we apply stretch factors to each widget, they will be laid out in
+ proportion (but never less than their minimum size hint), e.g.
+
+ \img layout2.png Three widgets with different stretch factors in a row
+
+
+ \section1 Custom Widgets in Layouts
+
+ When you make your own widget class, you should also communicate its layout
+ properties. If the widget has a one of Qt's layouts, this is already taken
+ care of. If the widget does not have any child widgets, or uses manual
+ layout, you can change the behavior of the widget using any or all of the
+ following mechanisms:
+
+ \list
+ \o Reimplement QWidget::sizeHint() to return the preferred size of the
+ widget.
+ \o Reimplement QWidget::minimumSizeHint() to return the smallest size
+ the widget can have.
+ \o Call QWidget::setSizePolicy() to specify the space requirements of
+ the widget.
+ \endlist
+
+ Call QWidget::updateGeometry() whenever the size hint, minimum size hint or
+ size policy changes. This will cause a layout recalculation. Multiple
+ consecutive calls to QWidget::updateGeometry() will only cause one layout
+ recalculation.
+
+ If the preferred height of your widget depends on its actual width (e.g.,
+ a label with automatic word-breaking), set the
+ \l{QSizePolicy::hasHeightForWidth()}{height-for-width} flag in the
+ widget's \l{QWidget::sizePolicy}{size policy} and reimplement
+ QWidget::heightForWidth().
+
+ Even if you implement QWidget::heightForWidth(), it is still a good idea to
+ provide a reasonable sizeHint().
+
+ For further guidance when implementing these functions, see the
+ \e{Qt Quarterly} article
+ \l{http://qt.nokia.com/doc/qq/qq04-height-for-width.html}
+ {Trading Height for Width}.
+
+
+ \section1 Layout Issues
+
+ The use of rich text in a label widget can introduce some problems to the
+ layout of its parent widget. Problems occur due to the way rich text is
+ handled by Qt's layout managers when the label is word wrapped.
+
+ In certain cases the parent layout is put into QLayout::FreeResize mode,
+ meaning that it will not adapt the layout of its contents to fit inside
+ small sized windows, or even prevent the user from making the window too
+ small to be usable. This can be overcome by subclassing the problematic
+ widgets, and implementing suitable \l{QWidget::}{sizeHint()} and
+ \l{QWidget::}{minimumSizeHint()} functions.
+
+ In some cases, it is relevant when a layout is added to a widget. When
+ you set the widget of a QDockWidget or a QScrollArea (with
+ QDockWidget::setWidget() and QScrollArea::setWidget()), the layout must
+ already have been set on the widget. If not, the widget will not be
+ visible.
+
+
+ \section1 Manual Layout
+
+ If you are making a one-of-a-kind special layout, you can also make a
+ custom widget as described above. Reimplement QWidget::resizeEvent() to
+ calculate the required distribution of sizes and call
+ \l{QWidget::}{setGeometry()} on each child.
+
+ The widget will get an event of type QEvent::LayoutRequest when the
+ layout needs to be recalculated. Reimplement QWidget::event() to handle
+ QEvent::LayoutRequest events.
+
+
+ \section1 How to Write A Custom Layout Manager
+
+ An alternative to manual layout is to write your own layout manager by
+ subclassing QLayout. The \l{layouts/borderlayout}{Border Layout} and
+ \l{layouts/flowlayout}{Flow Layout} examples show how to do this.
+
+ Here we present an example in detail. The \c CardLayout class is inspired
+ by the Java layout manager of the same name. It lays out the items (widgets
+ or nested layouts) on top of each other, each item offset by
+ QLayout::spacing().
+
+ To write your own layout class, you must define the following:
+ \list
+ \o A data structure to store the items handled by the layout. Each
+ item is a \link QLayoutItem QLayoutItem\endlink. We will use a
+ QList in this example.
+ \o \l{QLayout::}{addItem()}, how to add items to the layout.
+ \o \l{QLayout::}{setGeometry()}, how to perform the layout.
+ \o \l{QLayout::}{sizeHint()}, the preferred size of the layout.
+ \o \l{QLayout::}{itemAt()}, how to iterate over the layout.
+ \o \l{QLayout::}{takeAt()}, how to remove items from the layout.
+ \endlist
+
+ In most cases, you will also implement \l{QLayout::}{minimumSize()}.
+
+
+ \section2 The Header File (\c card.h)
+
+ \snippet doc/src/snippets/code/doc_src_layout.qdoc 0
+
+
+ \section2 The Implementation File (\c card.cpp)
+
+ \snippet doc/src/snippets/code/doc_src_layout.qdoc 1
+
+ First we define \c{count()} to fetch the number of items in the list.
+
+ \snippet doc/src/snippets/code/doc_src_layout.qdoc 2
+
+ Then we define two functions that iterate over the layout: \c{itemAt()}
+ and \c{takeAt()}. These functions are used internally by the layout system
+ to handle deletion of widgets. They are also available for application
+ programmers.
+
+ \c{itemAt()} returns the item at the given index. \c{takeAt()} removes the
+ item at the given index, and returns it. In this case we use the list index
+ as the layout index. In other cases where we have a more complex data
+ structure, we may have to spend more effort defining a linear order for the
+ items.
+
+ \snippet doc/src/snippets/code/doc_src_layout.qdoc 3
+
+ \c{addItem()} implements the default placement strategy for layout items.
+ This function must be implemented. It is used by QLayout::add(), by the
+ QLayout constructor that takes a layout as parent. If your layout has
+ advanced placement options that require parameters, you must provide extra
+ access functions such as the row and column spanning overloads of
+ QGridLayout::addItem(), QGridLayout::addWidget(), and
+ QGridLayout::addLayout().
+
+ \snippet doc/src/snippets/code/doc_src_layout.qdoc 4
+
+ The layout takes over responsibility of the items added. Since QLayoutItem
+ does not inherit QObject, we must delete the items manually. In the
+ destructor, we remove each item from the list using \c{takeAt()}, and
+ then delete it.
+
+ \snippet doc/src/snippets/code/doc_src_layout.qdoc 5
+
+ The \c{setGeometry()} function actually performs the layout. The rectangle
+ supplied as an argument does not include \c{margin()}. If relevant, use
+ \c{spacing()} as the distance between items.
+
+ \snippet doc/src/snippets/code/doc_src_layout.qdoc 6
+
+ \c{sizeHint()} and \c{minimumSize()} are normally very similar in
+ implementation. The sizes returned by both functions should include
+ \c{spacing()}, but not \c{margin()}.
+
+ \snippet doc/src/snippets/code/doc_src_layout.qdoc 7
+
+
+ \section2 Further Notes
+
+ \list
+ \o This custom layout does not handle height for width.
+ \o We ignore QLayoutItem::isEmpty(); this means that the layout will
+ treat hidden widgets as visible.
+ \o For complex layouts, speed can be greatly increased by caching
+ calculated values. In that case, implement
+ QLayoutItem::invalidate() to mark the cached data is dirty.
+ \o Calling QLayoutItem::sizeHint(), etc. may be expensive. So, you
+ should store the value in a local variable if you need it again
+ later within in the same function.
+ \o You should not call QLayoutItem::setGeometry() twice on the same
+ item in the same function. This call can be very expensive if the
+ item has several child widgets, because the layout manager must do
+ a complete layout every time. Instead, calculate the geometry and
+ then set it. (This does not only apply to layouts, you should do
+ the same if you implement your own resizeEvent(), for example.)
+ \endlist
+*/
+