diff options
Diffstat (limited to 'examples/declarative/toys/corkboards/qmlapplicationviewer')
3 files changed, 430 insertions, 0 deletions
diff --git a/examples/declarative/toys/corkboards/qmlapplicationviewer/qmlapplicationviewer.cpp b/examples/declarative/toys/corkboards/qmlapplicationviewer/qmlapplicationviewer.cpp new file mode 100644 index 0000000..411a04c --- /dev/null +++ b/examples/declarative/toys/corkboards/qmlapplicationviewer/qmlapplicationviewer.cpp @@ -0,0 +1,197 @@ +/**************************************************************************** +** +** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the QtCore module of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** $QT_END_LICENSE$ +** +****************************************************************************/ + +// checksum 0x28c7 version 0x2000a +/* + This file was generated by the Qt Quick Application wizard of Qt Creator. + QmlApplicationViewer is a convenience class containing mobile device specific + code such as screen orientation handling. Also QML paths and debugging are + handled here. + It is recommended not to modify this file, since newer versions of Qt Creator + may offer an updated version of it. +*/ + +#include "qmlapplicationviewer.h" + +#include <QtCore/QCoreApplication> +#include <QtCore/QDir> +#include <QtCore/QFileInfo> +#include <QtDeclarative/QDeclarativeComponent> +#include <QtDeclarative/QDeclarativeEngine> +#include <QtDeclarative/QDeclarativeContext> + +#if defined(QMLJSDEBUGGER) +#include <qt_private/qdeclarativedebughelper_p.h> +#endif + +#if defined(QMLJSDEBUGGER) && !defined(NO_JSDEBUGGER) +#include <jsdebuggeragent.h> +#endif +#if defined(QMLJSDEBUGGER) && !defined(NO_QMLOBSERVER) +#include <qdeclarativeviewobserver.h> +#endif + +#if defined(Q_OS_SYMBIAN) && defined(ORIENTATIONLOCK) +#include <eikenv.h> +#include <eikappui.h> +#include <aknenv.h> +#include <aknappui.h> +#endif // Q_OS_SYMBIAN && ORIENTATIONLOCK + +#if defined(QMLJSDEBUGGER) + +// Enable debugging before any QDeclarativeEngine is created +struct QmlJsDebuggingEnabler +{ + QmlJsDebuggingEnabler() + { + QDeclarativeDebugHelper::enableDebugging(); + } +}; + +// Execute code in constructor before first QDeclarativeEngine is instantiated +static QmlJsDebuggingEnabler enableDebuggingHelper; + +#endif // QMLJSDEBUGGER + +class QmlApplicationViewerPrivate +{ + QString mainQmlFile; + friend class QmlApplicationViewer; + static QString adjustPath(const QString &path); +}; + +QString QmlApplicationViewerPrivate::adjustPath(const QString &path) +{ +#ifdef Q_OS_UNIX +#ifdef Q_OS_MAC + if (!QDir::isAbsolutePath(path)) + return QCoreApplication::applicationDirPath() + + QLatin1String("/../Resources/") + path; +#else + const QString pathInShareDir = QCoreApplication::applicationDirPath() + + QLatin1String("/../share/") + + QFileInfo(QCoreApplication::applicationFilePath()).fileName() + + QLatin1Char('/') + path; + if (QFileInfo(pathInShareDir).exists()) + return pathInShareDir; +#endif +#endif + return path; +} + +QmlApplicationViewer::QmlApplicationViewer(QWidget *parent) : + QDeclarativeView(parent), + m_d(new QmlApplicationViewerPrivate) +{ + connect(engine(), SIGNAL(quit()), SLOT(close())); + setResizeMode(QDeclarativeView::SizeRootObjectToView); +#if defined(QMLJSDEBUGGER) && !defined(NO_JSDEBUGGER) + new QmlJSDebugger::JSDebuggerAgent(engine()); +#endif +#if defined(QMLJSDEBUGGER) && !defined(NO_QMLOBSERVER) + new QmlJSDebugger::QDeclarativeViewObserver(this, parent); +#endif +} + +QmlApplicationViewer::~QmlApplicationViewer() +{ + delete m_d; +} + +void QmlApplicationViewer::setMainQmlFile(const QString &file) +{ + m_d->mainQmlFile = QmlApplicationViewerPrivate::adjustPath(file); + setSource(QUrl::fromLocalFile(m_d->mainQmlFile)); +} + +void QmlApplicationViewer::addImportPath(const QString &path) +{ + engine()->addImportPath(QmlApplicationViewerPrivate::adjustPath(path)); +} + +void QmlApplicationViewer::setOrientation(ScreenOrientation orientation) +{ +#ifdef Q_OS_SYMBIAN + if (orientation != ScreenOrientationAuto) { +#if defined(ORIENTATIONLOCK) + const CAknAppUiBase::TAppUiOrientation uiOrientation = + (orientation == ScreenOrientationLockPortrait) ? CAknAppUi::EAppUiOrientationPortrait + : CAknAppUi::EAppUiOrientationLandscape; + CAknAppUi* appUi = dynamic_cast<CAknAppUi*> (CEikonEnv::Static()->AppUi()); + TRAPD(error, + if (appUi) + appUi->SetOrientationL(uiOrientation); + ); + Q_UNUSED(error) +#else // ORIENTATIONLOCK + qWarning("'ORIENTATIONLOCK' needs to be defined on Symbian when locking the orientation."); +#endif // ORIENTATIONLOCK + } +#elif defined(Q_WS_MAEMO_5) + Qt::WidgetAttribute attribute; + switch (orientation) { + case ScreenOrientationLockPortrait: + attribute = Qt::WA_Maemo5PortraitOrientation; + break; + case ScreenOrientationLockLandscape: + attribute = Qt::WA_Maemo5LandscapeOrientation; + break; + case ScreenOrientationAuto: + default: + attribute = Qt::WA_Maemo5AutoOrientation; + break; + } + setAttribute(attribute, true); +#else // Q_OS_SYMBIAN + Q_UNUSED(orientation); +#endif // Q_OS_SYMBIAN +} + +void QmlApplicationViewer::showExpanded() +{ +#ifdef Q_OS_SYMBIAN + showFullScreen(); +#elif defined(Q_WS_MAEMO_5) || defined(Q_WS_MAEMO_6) + showMaximized(); +#else + show(); +#endif +} diff --git a/examples/declarative/toys/corkboards/qmlapplicationviewer/qmlapplicationviewer.h b/examples/declarative/toys/corkboards/qmlapplicationviewer/qmlapplicationviewer.h new file mode 100644 index 0000000..f5b24b0 --- /dev/null +++ b/examples/declarative/toys/corkboards/qmlapplicationviewer/qmlapplicationviewer.h @@ -0,0 +1,79 @@ +/**************************************************************************** +** +** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the QtCore module of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** $QT_END_LICENSE$ +** +****************************************************************************/ + +// checksum 0x5a59 version 0x2000a +/* + This file was generated by the Qt Quick Application wizard of Qt Creator. + QmlApplicationViewer is a convenience class containing mobile device specific + code such as screen orientation handling. Also QML paths and debugging are + handled here. + It is recommended not to modify this file, since newer versions of Qt Creator + may offer an updated version of it. +*/ + +#ifndef QMLAPPLICATIONVIEWER_H +#define QMLAPPLICATIONVIEWER_H + +#include <QtDeclarative/QDeclarativeView> + +class QmlApplicationViewer : public QDeclarativeView +{ + Q_OBJECT + +public: + enum ScreenOrientation { + ScreenOrientationLockPortrait, + ScreenOrientationLockLandscape, + ScreenOrientationAuto + }; + + explicit QmlApplicationViewer(QWidget *parent = 0); + virtual ~QmlApplicationViewer(); + + void setMainQmlFile(const QString &file); + void addImportPath(const QString &path); + void setOrientation(ScreenOrientation orientation); + void showExpanded(); + +private: + class QmlApplicationViewerPrivate *m_d; +}; + +#endif // QMLAPPLICATIONVIEWER_H diff --git a/examples/declarative/toys/corkboards/qmlapplicationviewer/qmlapplicationviewer.pri b/examples/declarative/toys/corkboards/qmlapplicationviewer/qmlapplicationviewer.pri new file mode 100644 index 0000000..1c0c7ed --- /dev/null +++ b/examples/declarative/toys/corkboards/qmlapplicationviewer/qmlapplicationviewer.pri @@ -0,0 +1,154 @@ +# checksum 0x3dc8 version 0x2000a +# This file was generated by the Qt Quick Application wizard of Qt Creator. +# The code below adds the QmlApplicationViewer to the project and handles the +# activation of QML debugging. +# It is recommended not to modify this file, since newer versions of Qt Creator +# may offer an updated version of it. + +QT += declarative + +SOURCES += $$PWD/qmlapplicationviewer.cpp +HEADERS += $$PWD/qmlapplicationviewer.h +INCLUDEPATH += $$PWD + +defineTest(minQtVersion) { + maj = $$1 + min = $$2 + patch = $$3 + isEqual(QT_MAJOR_VERSION, $$maj) { + isEqual(QT_MINOR_VERSION, $$min) { + isEqual(QT_PATCH_VERSION, $$patch) { + return(true) + } + greaterThan(QT_PATCH_VERSION, $$patch) { + return(true) + } + } + greaterThan(QT_MINOR_VERSION, $$min) { + return(true) + } + } + return(false) +} + +contains(DEFINES, QMLJSDEBUGGER) { + CONFIG(debug, debug|release) { + !minQtVersion(4, 7, 1) { + warning() + warning("Disabling QML debugging:") + warning() + warning("Debugging QML requires the qmljsdebugger library that ships with Qt Creator.") + warning("This library requires Qt 4.7.1 or newer.") + warning() + DEFINES -= QMLJSDEBUGGER + } else:isEmpty(QMLJSDEBUGGER_PATH) { + warning() + warning("Disabling QML debugging:") + warning() + warning("Debugging QML requires the qmljsdebugger library that ships with Qt Creator.") + warning("Please specify its location on the qmake command line, eg") + warning(" qmake -r QMLJSDEBUGGER_PATH=$CREATORDIR/share/qtcreator/qmljsdebugger") + warning() + DEFINES -= QMLJSDEBUGGER + } else { + include($$QMLJSDEBUGGER_PATH/qmljsdebugger-lib.pri) + } + } else { + DEFINES -= QMLJSDEBUGGER + } +} +# This file was generated by an application wizard of Qt Creator. +# The code below handles deployment to Symbian and Maemo, aswell as copying +# of the application data to shadow build directories on desktop. +# It is recommended not to modify this file, since newer versions of Qt Creator +# may offer an updated version of it. + +defineTest(qtcAddDeployment) { +for(deploymentfolder, DEPLOYMENTFOLDERS) { + item = item$${deploymentfolder} + itemsources = $${item}.sources + $$itemsources = $$eval($${deploymentfolder}.source) + itempath = $${item}.path + $$itempath= $$eval($${deploymentfolder}.target) + export($$itemsources) + export($$itempath) + DEPLOYMENT += $$item +} + +MAINPROFILEPWD = $$PWD + +symbian { + ICON = $${TARGET}.svg + TARGET.EPOCHEAPSIZE = 0x20000 0x2000000 + contains(DEFINES, ORIENTATIONLOCK):LIBS += -lavkon -leikcore -lcone + contains(DEFINES, NETWORKACCESS):TARGET.CAPABILITY += NetworkServices +} else:win32 { + !isEqual(PWD,$$OUT_PWD) { + copyCommand = @echo Copying application data... + for(deploymentfolder, DEPLOYMENTFOLDERS) { + source = $$eval($${deploymentfolder}.source) + pathSegments = $$split(source, /) + sourceAndTarget = $$MAINPROFILEPWD/$$source $$OUT_PWD/$$eval($${deploymentfolder}.target)/$$last(pathSegments) + copyCommand += && $(COPY_DIR) $$replace(sourceAndTarget, /, \\) + } + copydeploymentfolders.commands = $$copyCommand + first.depends = $(first) copydeploymentfolders + export(first.depends) + export(copydeploymentfolders.commands) + QMAKE_EXTRA_TARGETS += first copydeploymentfolders + } +} else:unix { + maemo5 { + installPrefix = /opt/usr + desktopfile.path = /usr/share/applications/hildon + } else { + installPrefix = /usr/local + desktopfile.path = /usr/share/applications + !isEqual(PWD,$$OUT_PWD) { + copyCommand = @echo Copying application data... + for(deploymentfolder, DEPLOYMENTFOLDERS) { + macx { + target = $$OUT_PWD/$${TARGET}.app/Contents/Resources/$$eval($${deploymentfolder}.target) + } else { + target = $$OUT_PWD/$$eval($${deploymentfolder}.target) + } + copyCommand += && $(MKDIR) $$target + copyCommand += && $(COPY_DIR) $$MAINPROFILEPWD/$$eval($${deploymentfolder}.source) $$target + } + copydeploymentfolders.commands = $$copyCommand + first.depends = $(first) copydeploymentfolders + export(first.depends) + export(copydeploymentfolders.commands) + QMAKE_EXTRA_TARGETS += first copydeploymentfolders + } + } + for(deploymentfolder, DEPLOYMENTFOLDERS) { + item = item$${deploymentfolder} + itemfiles = $${item}.files + $$itemfiles = $$eval($${deploymentfolder}.source) + itempath = $${item}.path + $$itempath = $${installPrefix}/share/$${TARGET}/$$eval($${deploymentfolder}.target) + export($$itemfiles) + export($$itempath) + INSTALLS += $$item + } + icon.files = $${TARGET}.png + icon.path = /usr/share/icons/hicolor/64x64/apps + desktopfile.files = $${TARGET}.desktop + target.path = $${installPrefix}/bin + export(icon.files) + export(icon.path) + export(desktopfile.files) + export(desktopfile.path) + export(target.path) + INSTALLS += desktopfile icon target +} + +export (ICON) +export (INSTALLS) +export (DEPLOYMENT) +export (TARGET.EPOCHEAPSIZE) +export (TARGET.CAPABILITY) +export (LIBS) +export (QMAKE_EXTRA_TARGETS) +} |