path: root/doc/src/declarative/qmlforcpp.qdoc

/*!
    \page qmlforcpp.html
    \target qmlforcpp
    \title QML for C++ Programmers

    This page describes the QML format and how to use and extend it from C++.

    The QML syntax declaratively describes how to construct an in memory
    object tree.  QML is usually used to describe a visual scene graph 
    but it is not conceptually limited to this: the QML format is an abstract 
    description of \bold any object tree.  

    QML also includes property bindings.  Bindings are ECMAScript expressions 
    of a properties value.  Whenever the value of the expression changes - 
    either for the first time at startup or subsequently thereafter - the 
    property is automatically updated with the new value.

    \tableofcontents

    \section1 Loading and using QML Files

    QmlComponent is used to load a QML file and to create object instances.

    In QML a component is the unit of instantiation, and the most basic unit 
    of scope.  A component is like a template for how to construct an object 
    tree.  One component can create multiple instances of this tree, but the 
    template remains constant.  

    The following code uses the C++ interface to create 100 red rectangles
    based on a simple declarative component description.

    \code
    QmlEngine engine;
    QmlComponent redRectangle(&engine, "Rectangle { color: \"red\"; width: 100; height: 100 }");
    for (int ii = 0; ii < 100; ++ii) {
        QObject *rectangle = redRectangle.create();
        // ... do something with the rectangle ...
    }
    \endcode
    
    Each independent file describes a QML component, but it is also possible to
    create sub-components within a QML file as will be shown later.
    
    \section1 QML Format 101

    This is some sample QML code.

    \code
    Image {
        id: myRect
        x: 10
        y: 10
        width: 100
        height: 100
        source: "background.png"

        Text {
            height: 50
            width: 100
            color: "white"
            font.fontSize: 16
            text: "Hello world!"
        }
    }
    \endcode

    The QML snippet shown above instantiates one \c Image instance and one 
    \c Text instance and sets properties on both.  \bold Everything in QML 
    ultimately comes down to either instantiating an object instance, or
    assigning a property a value.  QML relies heavily on Qt's meta object system
    and can only instantiate classes that derive from QObject.

    In the above example, each property is placed on its own line.  You can
    also place multiple properties on one line by separating them with a
    semi-colon. The code below is equivalent to the example above.

    \code
    Image {
        id: myRect
        x: 10; y: 10; width: 100; height: 100
        source: "background.png"
        Text { height: 50; width: 100; color: "white"; font.fontSize: 16; text: "Hello world!" }
    }
    \endcode

    QML can set properties that are more complex than just simple types like 
    integers and strings.  Properties can be object pointers or Qt interface 
    pointers or even lists of object or Qt interface pointers!  QML is typesafe,
    and will ensure that only the valid types are assigned to properties.

    Assigning an object to a property is as simple as assigning a basic
    integer.  Attempting to assign an object to a property when type coercian 
    fails will produce an error.  The following shows an example of valid and of
    invalid QML and the corresponding C++ classes.

    \table
    \row \o
    \code 
    class Image : public QObject
    {
        ... 
        Q_PROPERTY(ImageFilter *filter READ filter WRITE setFilter)
    }; 

    class ImageFilter : public QObject 
    {
        ...
    };
    \endcode
    \o \code
    // OK
    Image {
        filter: ImageFilter {}
    }

    // NOT OK: Image cannot be cast into ImageFilter
    Image {
        filter: Image {}
    }
    \endcode
    \endtable

    Classes can also define an optional default property.  The default property
    is used for assignment if no explicit property has been specified.  
    Any object property can be the default, even complex properties like lists
    of objects.  The default property of the \c Rect class is the \c children 
    property, a list of \c Item's.  In the following example, as both \c Image 
    and \c Text inherit from \c Item the \c Image and \c Text instances are 
    added to the parent's \c children property.

    \code
        Rectangle {
            Image {}
            Text {}
        }
    \endcode

    Properties that return read-only object pointers can be used recursively.  
    This can be used, for example, to group properties together.  The 
    \c Text element has a \c font property that returns an object with a number
    of sub-properties such as \c family, \c bold, \c italic and \c size.  
    QML makes it easy to interact with these grouped properties, as the
    following shows - everything you would expect to work, just does.

    \table
    \row \o
    \code
    class Text : public ...
    {
        ...
        Q_PROPERTY(Font *font READ font);
    };
    class Font : public QObject 
    {
        ...
        Q_PROPERTY(QString family READ family WRITE setFamily);
        Q_PROPERTY(bool bold READ bold WRITE setBold);
        Q_PROPERTY(bool italic READ italic WRITE setItalic);
        Q_PROPERTY(int size READ size WRITE setSize);
    };
    \endcode
    \o
    \code
        Text {
            font.family: "helvetica"
            font.pointSize: 12
            font {
                bold: true
                italic: true
            }
        }
    \endcode
    \endtable

    \section1 Defining QML Types

    The QML engine has no intrinsic knowledge of any class types.  Instead
    the programmer must define the C++ types, their corresponding QML
    name, library namespace, and version availability.
    
    \code
    #define QML_DECLARE_TYPE(T)
    #define QML_DEFINE_TYPE(URI,VMAJ,VFROM,VTO,QmlName,T)
    \endcode

    Adding these macros to your library or executable automatically makes the 
    C++ type \a T available from the declarative markup language under the
    name \a QmlName.  Of course there's nothing stopping you using the same
    name for both the C++ and the QML name!
    Any type can be added to the QML engine using these macros.  The only 
    requirements are that \a T inherits QObject, is not abstract,
    and that it has a default constructor.

    \section1 Property Binding 

    Assigning constant values and trees to properties will only get you so
    far.  Property binding allows a property's value to be dependant on the 
    value of other properties and data.  Whenever these dependencies change,
    the property's value is automatically updated.  

    Property bindings are ECMAScript expressions and can be applied to any 
    object property.  C++ classes don't have to do anything special to get 
    binding support other than define appropriate properties.  When a non-literal
    property assignment appears in a QML file, it is automatically treated as a 
    property binding.

    Here's a simple example that stacks a red, blue and green rectangle.  
    Bindings are used to ensure that the height of each is kept equal to it's
    parent's.  Were the root rectangle's height property to change, the child 
    rectangles height would be updated automatically.

    \code
        Rectangle {
            color: "red"
            width: 100
            Rectangle {
                color: "blue"
                width: 50
                height: parent.height
                Rectangle {
                    color: "green"
                    width: 25
                    height: parent.height
                }
            }
        }
    \endcode

    Binding expressions execute in a context.  A context behaves as a scope and
    defines how the expression resolves property and variable names.   Although
    the two expressions in the last example are the same, the value of \c parent
    resolves differently because each executes in a different context.  Although
    QML generally takes care of everything for the programmer, a thorough 
    understanding of bind contexts is important in some of the more complex QML
    structures.

    Every expression is executed in a bind context, encapsulated by the 
    QmlContext C++ class.  As covered in the class documentation, a 
    bind context contains a map of names to values, and a list of default 
    objects.  When resolving a name, the name to value map is searched first.
    If the name cannot be found, the default object's are iterated in turn and 
    the context attempts to resolve the name as a property of one of the default
    objects.

    There are generally two contexts involved in the execution of a binding.
    The first is the "object context" - a bind context associated with the 
    closest instantiated object and containing just one default object, and 
    that's instantiated object itself.  The effect of the object
    context is pretty simple - names in the binding expression resolve to 
    properties on the object first.  It is important to note - particularly in 
    the case of grouped properties - the object context is that of the 
    instantiated object,  the consequences of which are shown below.

    \code
    // OK                                  // NOT OK
    Text {                                 Text {
        font {                                 font {
            bold: font.italic                      bold: italic
        }                                      }
    }                                      }
    \endcode

    The second context is the "component context".  Each QML component (and 
    consequently each QML file) is created in its own unique binding context.
    Like the object context, the component context contains just one default
    object - but in this case it is the component's root object.  An example
    will illustrate best - the resultant text will read "background.png".

    \code
    Image {
        source: "background.png"
        Text {
            text: source
        }
    }
    \endcode

    If the name is not found in either of these contexts, the context heirarchy
    is searched parent-by-parent until the name is either found, or the
    heirarchy is exhausted.

    The first property binding example shown involved fixing the height of three
    rectangles.  It did this by fixing the height of each rectangle to its
    parent, rather than fixing them all to a single common point.  Here's the
    example rewritten to do just that.

    \code
    Rectangle {
        color: "red"
        width: 100
        Rectangle { 
            color: "blue"
            width: 50
            height: parent.height
            Rectangle {
                color: "green"
                width: 25
                height: parent.parent.height
            }
        }
    }
    \endcode

    Clearly this sort of fragile relationship is undesirable and unmanageable - 
    moving the green rectangle to be a sibling of the blue or introducing a 
    further rectangle between the two would break the example.

    To address this problem, QML includes a way to directly reference any object
    within a component (or parent component for that matter), called "ids".  
    Developers assign an object an id, and can then reference it directly by 
    name.  Developers assign an object an id by setting the special \c id
    property.  Every object automatically has this magical property (if the
    object also has an actual property called \c id, that gets set too).  As
    an id allows an object to be referenced directly, it must be unique within
    a component.  By convention, id's should start with an uppercase letter.

    \code
    Rectangle {
        id: Root
        color: "red"
        width: GreenRect.width + 75
        height: Root.height
        Rectangle {
            color: "blue"
            width: GreenRect.width + 25
            Rectangle {
                id: GreenRect
                color: "green"
                width: 25
                height: Root.height
            }
        }
    }
    \endcode

    To relate id's back to QmlContext, id's exist as properties on the
    component context.

    Bind expressions can reference any object property.  The QML bind engine 
    relies on the presence of the NOTIFY signal in the Q_PROPERTY declaration 
    on a class to alert it that a property's value has changed.  If this is 
    omitted, the bind expression can still access the property's value, but
    the expression will not be updated if the value changes.  The following is 
    an example of a QML friendly property declaration.

    \code
    class Example : public QObject
    {
    Q_OBJECT
    Q_PROPERTY(int sample READ sample WRITE setSample NOTIFY sampleChanged)
    public:
        int sample() const;
        void setSample(int);
    signals:
        void sampleChanged(int);
    };
    \endcode

    While generally no changes are needed to a C++ class to use property 
    binding, sometimes more advanced interaction between the binding engine and
    an object is desirable.  To facilitate this, there is a special exception
    in the bind engine for allowing an object to access the binding directly.

    If a binding is assigned to a property with a type of QmlBindableValue 
    pointer (ie. QmlBindableValue *), each time the binding value changes,
    a QmlBindableValue instance is assigned to that property.  The 
    QmlBindableValue instance allows the object to read the binding and to
    evaluate the binding's current value.

    \section1 Signal Properties

    In addition to reading and writing regular properties, QML allows you to 
    easily associate ECMAScript with signals.  Consider the following example,
    in which Button is a made-up type with a clicked() signal.

    \code
    Button {
        text: "Hello world!"
        onClicked: print(text)
    }
    \endcode

    Clicking on the button causes "Hello world!" to be printed to the console
    (or lost forever if you're running Windows).

    Like properties, signals automatically become available in QML without
    any additional work.  As illustrated signals are mapped into QML as special
    "signal properties", using the name "on<Signal Name>" where the first 
    character of the signal's name is uppercased.  If more than one signal of
    the same name is exist on a class, only the first is available (see the
    \l Connection element for more general signal connections).

    An important observation to make here is the lack of braces.  While both
    property bindings and signal properties involve executing ECMAScript code,
    property bindings dynamically update the property value (hence the braces),
    whereas with signal properties the constant script "value" is actually 
    assigned to the signal property.  Trying to bind a value to a signal 
    property will not work!

    Signal parameters are also available to the executing script, as shown 
    below, as long as you remember to name the parameters of your signal
    in C++ (see QMetaMethod::parameterNames()).

    \table
    \row \o
    \code
    Example {
        onDoSomething: for(var ii = 0; ii &lt; count; ++ii) 
                           print(message)
    }
    \endcode
    \o
    \code
    class Example : public QObject
    {
    Q_OBJECT
    signals:
        void doSomething(int count, const QString &message);
    };
    \endcode
    \endtable
    
    Just like property bindings, signal scripts are executed in a context.  The
    signal script context is identical in scope to the "object context" under
    property binding, with the exception that it has the signal parameters 
    bound in.

    In addition to scripts, it is possible to assign objects to signal properties.
    This automatically connects the signal to the object's default method.  A
    default method is defined just like a default property, though the special
    "DefaultMethod" class info.

    \code
    Q_CLASSINFO("DefaultMethod", "myMethod(int)");
    \endcode

    This is useful in achieving several use cases, like that below which moves
    the button when it is clicked.

    \code
    Button {
        id: MyButton
        onClicked: NumberAnimation {
            target: MyButton
            property: "x"
            to: 100
        }
    }
    \endcode

    If the class itself actually defines a property called "on<Name>", this will
    be assigned the string value and the signal handling behaviour will be 
    disabled.

    \section1 Attached Properties

    Attached properties allow unrelated types to annotate another type with some
    additional properties.  Some APIs or operations are inherintly imperative,
    and attached properties help out when translating these APIs into the 
    declarative QML language.

    Qt's QGridLayout is one such example.

    \code
    QGridLayout {
        QLabel {
            QGridLayout.row: 0
            QGridLayout.column: 0
            text: "Name:"
        }
        QLineEdit {
            QGridLayout.row: 0
            QGridLayout.column: 1
        }

        QLabel {
            QGridLayout.row: 1
            QGridLayout.column: 0
            text: "Occupation:"
        }
        QLineEdit {
            QGridLayout.row: 1
            QGridLayout.column: 1
        }
    }
    \endcode
    
    Attached properties are identified by the use of a type name, in the
    case shown \c QGridLayout, as a grouped property specifier.  To prevent
    ambiguity with actual class instantiations, attached properties must
    always be specified to include a period but can otherwise be used just like
    regular properties.

    C++ types provide attached properties by declaring the public function \c qmlAttachedProperties like this example.

    \table
    \row \o
    \code
        static QObject *Type::qmlAttachedProperties(QObject *);
    \endcode
    \o
    \code
    class Example : public QObject
    {
        Q_OBJECT
    public:
        static QObject *qmlAttachedProperties(QObject *);
    };
    \endcode
    \endtable
    
    When an attached property is accessed, the QML engine will call this method
    to create an attachment object, passing in the object instance that the
    attached property applies to.  The attachment object should define all
    the attached properties, and is generally parented to the provided object
    instance to avoid memory leaks.  The QML engine does not saves this object,
    so it is not necessary for the attached property function to ensure that 
    multiple calls for the same instance object return the same attached object.

    While conceptually simple, implementing an attachment object is not quite
    so easy.  The \c qmlAttachedProperties function is static - attachment 
    objects are not associated with any particular instance.  How the values
    of the attached properties apply to the behaviour they are controlling is
    entirely implementation dependent.  An additional consequence of this is
    that \bold any object can attach \bold any attached property.  The following is
    perfectly valid, although the attached property has no actual effect:

    \code
    FancyGridLayout {
        Item {
            Button {
                QGridLayout.row: 1
            }
        }
    }
    \endcode

    The property has no effect because the (made-up) FancyGridLayout type defines the meaning
    of the \c row attached property only to apply to its direct children.  It
    is possible that other types may have attached properties that affect 
    objects that aren't their direct children.

    Attached properties are an advanced feature that should be used with 
    caution.

    \note We may implement a convenience wrapper that makes using attached 
    properties easier for the common "attach to children" case.

    \section1 Property Value Sources

    Intrinsically, the QML engine can assign a property either a static value,
    such as a number or an object tree, or a property binding.  It is possible for
    advanced users to extend the engine to assign other "types" of values to
    properties.  These "types" are known as property value sources.

    Consider the following example.

    \code
    Rectangle {
        x: NumberAnimation { running: true; repeat; true; from: 0; to: 100; }
    }
    \endcode

    Here the \c x property of the rectangle will be animated from 0 to 100.
    To support this, the NumberAnimation class inherits the 
    QmlPropertyValueSource class.  If a type inherits this class and is assigned
    to a property for which type assignment would otherwise fail (ie. the
    property itself doesn't have a type of QmlPropertyValueSource *), the QML
    engine will automatically set the property as the target of the value 
    source.

    \section1 Parser Status

    Generally using QML is a breeze - you implement your classes in C++, add
    the appropriate properties, signals and slots and off you go.  The QML
    engine takes care of instantiating your classes and setting the properties
    and everything works fine.
    
    However, sometimes it is helpful to know a little more about the status of
    the QML parser.  For example, it might be beneficial from a performance 
    standpoint to delay initializing some data structures until all the 
    properties have been set.

    To assist with this, the QML engine defines an interface class called 
    QmlParserStatus.  The interface defines a number of virtual methods that are
    invoked at various stages of the component instantiation.  To receive
    these notifications, all a class has to do is to inherit the interface, and
    notify the Qt meta system using the Q_INTERFACES() macro.  For example,

    \code
    class Example : public QObject, public QmlParserStatus
    {
        Q_OBJECT
        Q_INTERFACES(QmlParserStatus)
    public:
        virtual void componentComplete()
        {
            qDebug() << "Woohoo!  Now to do my costly initialization";
        }
    };
    \endcode

    \section1 Extended Type Definitions

    QML requires that types have the appropriate properties and signals to 
    work well within the declarative environment.  In the case of existing
    types, it is sometimes necessary to add signals, properties or slots to a 
    target class to make it more QML friendly but the original type cannot be 
    modified.  For these cases, the QML engine supports extended type 
    definitions.

    An extended type definition allows the programmer to supply an additional
    type - known as the extension type - when registering the target class
    whose properties, signals and slots are transparently merged with the 
    original target class when used from within QML.

    An extension class is a regular QObject, with a constructor that takes a
    QObject pointer.  When needed (extension classes are delay created 
    until the first extension attribute is accessed) the extension
    class is created and the target object is passed in as the parent.  When
    an extension attribute on the original is accessed, the appropriate signal,
    property or slots on the extension object is used instead.

    When an extended type is installed, the 
    \code
        #define QML_DEFINE_EXTENDED_TYPE(T,QmlName,ExtendedTypeName)
    \endcode
    macro should be used instead of the regular \c QML_DEFINE_TYPE.

    This example shows the addition of a read-only \c textLength property to 
    QLabel being implemented as an extension.

    \table
    \row
    \o
    \code
    class QLabelExtension : public QObject
    {
        Q_OBJECT
        Q_PROPERTY(int textLength READ textLength)
    public:
        QWidgetExtension(QObject *parent) : QObject(parent) {}
        int textLength() const { 
            return static_cast<QLabel *>(parent())->text().count(); 
        }
    };
    QML_DEFINE_EXTENDED_TYPE(QLabel,QLabel,QLabelExtension);
    \endcode
    \o 
    \code
    QLabel { 
        id: Label1
        text: "Hello World!"
    }
    QLabel { 
        text: "Label1 text length: " + Label1.textLength
    }
    \endcode
    \endtable

    Attributes defined through extensions are inherited, just like attributes
    defined on a normal class.  Any types that inherit from \c QLabel, will
    also have the \c textLength property.  Derived types can include additional
    extensions which are merged together, but only a single extension can be
    specified for each single C++ class.

    Extended type definitions can even be used to add an attached properties
    function to a type - just declare the \c qmlAttachedProperties function on
    the extension object.

*/