inital commit

1 files changed, 402 insertions, 0 deletions

diff --git a/openssl/crypto/engine/eng_openssl.c b/openssl/crypto/engine/eng_openssl.c
new file mode 100644
index 0000000..34b0029
--- /dev/null
+++ b/openssl/crypto/engine/eng_openssl.c
@@ -0,0 +1,402 @@
+/* crypto/engine/eng_openssl.c */
+/*
+ * Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL project
+ * 2000.
+ */
+/* ====================================================================
+ * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+/* ====================================================================
+ * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
+ * ECDH support in OpenSSL originally developed by
+ * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
+ */
+
+#include <stdio.h>
+#include <openssl/crypto.h>
+#include "cryptlib.h"
+#include <openssl/engine.h>
+#include <openssl/dso.h>
+#include <openssl/pem.h>
+#include <openssl/evp.h>
+#include <openssl/rand.h>
+#ifndef OPENSSL_NO_RSA
+# include <openssl/rsa.h>
+#endif
+#ifndef OPENSSL_NO_DSA
+# include <openssl/dsa.h>
+#endif
+#ifndef OPENSSL_NO_DH
+# include <openssl/dh.h>
+#endif
+
+/*
+ * This testing gunk is implemented (and explained) lower down. It also
+ * assumes the application explicitly calls "ENGINE_load_openssl()" because
+ * this is no longer automatic in ENGINE_load_builtin_engines().
+ */
+#define TEST_ENG_OPENSSL_RC4
+#define TEST_ENG_OPENSSL_PKEY
+/* #define TEST_ENG_OPENSSL_RC4_OTHERS */
+#define TEST_ENG_OPENSSL_RC4_P_INIT
+/* #define TEST_ENG_OPENSSL_RC4_P_CIPHER */
+#define TEST_ENG_OPENSSL_SHA
+/* #define TEST_ENG_OPENSSL_SHA_OTHERS */
+/* #define TEST_ENG_OPENSSL_SHA_P_INIT */
+/* #define TEST_ENG_OPENSSL_SHA_P_UPDATE */
+/* #define TEST_ENG_OPENSSL_SHA_P_FINAL */
+
+/* Now check what of those algorithms are actually enabled */
+#ifdef OPENSSL_NO_RC4
+# undef TEST_ENG_OPENSSL_RC4
+# undef TEST_ENG_OPENSSL_RC4_OTHERS
+# undef TEST_ENG_OPENSSL_RC4_P_INIT
+# undef TEST_ENG_OPENSSL_RC4_P_CIPHER
+#endif
+#if defined(OPENSSL_NO_SHA) || defined(OPENSSL_NO_SHA0) || defined(OPENSSL_NO_SHA1)
+# undef TEST_ENG_OPENSSL_SHA
+# undef TEST_ENG_OPENSSL_SHA_OTHERS
+# undef TEST_ENG_OPENSSL_SHA_P_INIT
+# undef TEST_ENG_OPENSSL_SHA_P_UPDATE
+# undef TEST_ENG_OPENSSL_SHA_P_FINAL
+#endif
+
+#ifdef TEST_ENG_OPENSSL_RC4
+static int openssl_ciphers(ENGINE *e, const EVP_CIPHER **cipher,
+                           const int **nids, int nid);
+#endif
+#ifdef TEST_ENG_OPENSSL_SHA
+static int openssl_digests(ENGINE *e, const EVP_MD **digest,
+                           const int **nids, int nid);
+#endif
+
+#ifdef TEST_ENG_OPENSSL_PKEY
+static EVP_PKEY *openssl_load_privkey(ENGINE *eng, const char *key_id,
+                                      UI_METHOD *ui_method,
+                                      void *callback_data);
+#endif
+
+/* The constants used when creating the ENGINE */
+static const char *engine_openssl_id = "openssl";
+static const char *engine_openssl_name = "Software engine support";
+
+/*
+ * This internal function is used by ENGINE_openssl() and possibly by the
+ * "dynamic" ENGINE support too
+ */
+static int bind_helper(ENGINE *e)
+{
+    if (!ENGINE_set_id(e, engine_openssl_id)
+        || !ENGINE_set_name(e, engine_openssl_name)
+#ifndef TEST_ENG_OPENSSL_NO_ALGORITHMS
+# ifndef OPENSSL_NO_RSA
+        || !ENGINE_set_RSA(e, RSA_get_default_method())
+# endif
+# ifndef OPENSSL_NO_DSA
+        || !ENGINE_set_DSA(e, DSA_get_default_method())
+# endif
+# ifndef OPENSSL_NO_ECDH
+        || !ENGINE_set_ECDH(e, ECDH_OpenSSL())
+# endif
+# ifndef OPENSSL_NO_ECDSA
+        || !ENGINE_set_ECDSA(e, ECDSA_OpenSSL())
+# endif
+# ifndef OPENSSL_NO_DH
+        || !ENGINE_set_DH(e, DH_get_default_method())
+# endif
+        || !ENGINE_set_RAND(e, RAND_SSLeay())
+# ifdef TEST_ENG_OPENSSL_RC4
+        || !ENGINE_set_ciphers(e, openssl_ciphers)
+# endif
+# ifdef TEST_ENG_OPENSSL_SHA
+        || !ENGINE_set_digests(e, openssl_digests)
+# endif
+#endif
+#ifdef TEST_ENG_OPENSSL_PKEY
+        || !ENGINE_set_load_privkey_function(e, openssl_load_privkey)
+#endif
+        )
+        return 0;
+    /*
+     * If we add errors to this ENGINE, ensure the error handling is setup
+     * here
+     */
+    /* openssl_load_error_strings(); */
+    return 1;
+}
+
+static ENGINE *engine_openssl(void)
+{
+    ENGINE *ret = ENGINE_new();
+    if (!ret)
+        return NULL;
+    if (!bind_helper(ret)) {
+        ENGINE_free(ret);
+        return NULL;
+    }
+    return ret;
+}
+
+void ENGINE_load_openssl(void)
+{
+    ENGINE *toadd = engine_openssl();
+    if (!toadd)
+        return;
+    ENGINE_add(toadd);
+    /*
+     * If the "add" worked, it gets a structural reference. So either way, we
+     * release our just-created reference.
+     */
+    ENGINE_free(toadd);
+    ERR_clear_error();
+}
+
+/*
+ * This stuff is needed if this ENGINE is being compiled into a
+ * self-contained shared-library.
+ */
+#ifdef ENGINE_DYNAMIC_SUPPORT
+static int bind_fn(ENGINE *e, const char *id)
+{
+    if (id && (strcmp(id, engine_openssl_id) != 0))
+        return 0;
+    if (!bind_helper(e))
+        return 0;
+    return 1;
+}
+
+IMPLEMENT_DYNAMIC_CHECK_FN()
+    IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)
+#endif                          /* ENGINE_DYNAMIC_SUPPORT */
+#ifdef TEST_ENG_OPENSSL_RC4
+/*-
+ * This section of code compiles an "alternative implementation" of two modes of
+ * RC4 into this ENGINE. The result is that EVP_CIPHER operation for "rc4"
+ * should under normal circumstances go via this support rather than the default
+ * EVP support. There are other symbols to tweak the testing;
+ *    TEST_ENC_OPENSSL_RC4_OTHERS - print a one line message to stderr each time
+ *        we're asked for a cipher we don't support (should not happen).
+ *    TEST_ENG_OPENSSL_RC4_P_INIT - print a one line message to stderr each time
+ *        the "init_key" handler is called.
+ *    TEST_ENG_OPENSSL_RC4_P_CIPHER - ditto for the "cipher" handler.
+ */
+# include <openssl/rc4.h>
+# define TEST_RC4_KEY_SIZE               16
+static int test_cipher_nids[] = { NID_rc4, NID_rc4_40 };
+
+static int test_cipher_nids_number = 2;
+typedef struct {
+    unsigned char key[TEST_RC4_KEY_SIZE];
+    RC4_KEY ks;
+} TEST_RC4_KEY;
+# define test(ctx) ((TEST_RC4_KEY *)(ctx)->cipher_data)
+static int test_rc4_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
+                             const unsigned char *iv, int enc)
+{
+# ifdef TEST_ENG_OPENSSL_RC4_P_INIT
+    fprintf(stderr, "(TEST_ENG_OPENSSL_RC4) test_init_key() called\n");
+# endif
+    memcpy(&test(ctx)->key[0], key, EVP_CIPHER_CTX_key_length(ctx));
+    RC4_set_key(&test(ctx)->ks, EVP_CIPHER_CTX_key_length(ctx),
+                test(ctx)->key);
+    return 1;
+}
+
+static int test_rc4_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
+                           const unsigned char *in, size_t inl)
+{
+# ifdef TEST_ENG_OPENSSL_RC4_P_CIPHER
+    fprintf(stderr, "(TEST_ENG_OPENSSL_RC4) test_cipher() called\n");
+# endif
+    RC4(&test(ctx)->ks, inl, in, out);
+    return 1;
+}
+
+static const EVP_CIPHER test_r4_cipher = {
+    NID_rc4,
+    1, TEST_RC4_KEY_SIZE, 0,
+    EVP_CIPH_VARIABLE_LENGTH,
+    test_rc4_init_key,
+    test_rc4_cipher,
+    NULL,
+    sizeof(TEST_RC4_KEY),
+    NULL,
+    NULL,
+    NULL,
+    NULL
+};
+
+static const EVP_CIPHER test_r4_40_cipher = {
+    NID_rc4_40,
+    1, 5 /* 40 bit */ , 0,
+    EVP_CIPH_VARIABLE_LENGTH,
+    test_rc4_init_key,
+    test_rc4_cipher,
+    NULL,
+    sizeof(TEST_RC4_KEY),
+    NULL,
+    NULL,
+    NULL,
+    NULL
+};
+
+static int openssl_ciphers(ENGINE *e, const EVP_CIPHER **cipher,
+                           const int **nids, int nid)
+{
+    if (!cipher) {
+        /* We are returning a list of supported nids */
+        *nids = test_cipher_nids;
+        return test_cipher_nids_number;
+    }
+    /* We are being asked for a specific cipher */
+    if (nid == NID_rc4)
+        *cipher = &test_r4_cipher;
+    else if (nid == NID_rc4_40)
+        *cipher = &test_r4_40_cipher;
+    else {
+# ifdef TEST_ENG_OPENSSL_RC4_OTHERS
+        fprintf(stderr, "(TEST_ENG_OPENSSL_RC4) returning NULL for "
+                "nid %d\n", nid);
+# endif
+        *cipher = NULL;
+        return 0;
+    }
+    return 1;
+}
+#endif
+
+#ifdef TEST_ENG_OPENSSL_SHA
+/* Much the same sort of comment as for TEST_ENG_OPENSSL_RC4 */
+# include <openssl/sha.h>
+static int test_digest_nids[] = { NID_sha1 };
+
+static int test_digest_nids_number = 1;
+static int test_sha1_init(EVP_MD_CTX *ctx)
+{
+# ifdef TEST_ENG_OPENSSL_SHA_P_INIT
+    fprintf(stderr, "(TEST_ENG_OPENSSL_SHA) test_sha1_init() called\n");
+# endif
+    return SHA1_Init(ctx->md_data);
+}
+
+static int test_sha1_update(EVP_MD_CTX *ctx, const void *data, size_t count)
+{
+# ifdef TEST_ENG_OPENSSL_SHA_P_UPDATE
+    fprintf(stderr, "(TEST_ENG_OPENSSL_SHA) test_sha1_update() called\n");
+# endif
+    return SHA1_Update(ctx->md_data, data, count);
+}
+
+static int test_sha1_final(EVP_MD_CTX *ctx, unsigned char *md)
+{
+# ifdef TEST_ENG_OPENSSL_SHA_P_FINAL
+    fprintf(stderr, "(TEST_ENG_OPENSSL_SHA) test_sha1_final() called\n");
+# endif
+    return SHA1_Final(md, ctx->md_data);
+}
+
+static const EVP_MD test_sha_md = {
+    NID_sha1,
+    NID_sha1WithRSAEncryption,
+    SHA_DIGEST_LENGTH,
+    0,
+    test_sha1_init,
+    test_sha1_update,
+    test_sha1_final,
+    NULL,
+    NULL,
+    EVP_PKEY_RSA_method,
+    SHA_CBLOCK,
+    sizeof(EVP_MD *) + sizeof(SHA_CTX),
+};
+
+static int openssl_digests(ENGINE *e, const EVP_MD **digest,
+                           const int **nids, int nid)
+{
+    if (!digest) {
+        /* We are returning a list of supported nids */
+        *nids = test_digest_nids;
+        return test_digest_nids_number;
+    }
+    /* We are being asked for a specific digest */
+    if (nid == NID_sha1)
+        *digest = &test_sha_md;
+    else {
+# ifdef TEST_ENG_OPENSSL_SHA_OTHERS
+        fprintf(stderr, "(TEST_ENG_OPENSSL_SHA) returning NULL for "
+                "nid %d\n", nid);
+# endif
+        *digest = NULL;
+        return 0;
+    }
+    return 1;
+}
+#endif
+
+#ifdef TEST_ENG_OPENSSL_PKEY
+static EVP_PKEY *openssl_load_privkey(ENGINE *eng, const char *key_id,
+                                      UI_METHOD *ui_method,
+                                      void *callback_data)
+{
+    BIO *in;
+    EVP_PKEY *key;
+    fprintf(stderr, "(TEST_ENG_OPENSSL_PKEY)Loading Private key %s\n",
+            key_id);
+    in = BIO_new_file(key_id, "r");
+    if (!in)
+        return NULL;
+    key = PEM_read_bio_PrivateKey(in, NULL, 0, NULL);
+    BIO_free(in);
+    return key;
+}
+#endif