update to tcl/tk 8.6.7

1 files changed, 0 insertions, 293 deletions

diff --git a/tk8.6/doc/checkbutton.n b/tk8.6/doc/checkbutton.n
deleted file mode 100644
index bfefca4..0000000
--- a/tk8.6/doc/checkbutton.n
+++ /dev/null
@@ -1,293 +0,0 @@
-'\"
-'\" Copyright (c) 1990-1994 The Regents of the University of California.
-'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
-'\"
-'\" See the file "license.terms" for information on usage and redistribution
-'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-'\"
-.TH checkbutton n 4.4 Tk "Tk Built-In Commands"
-.so man.macros
-.BS
-'\" Note:  do not modify the .SH NAME line immediately below!
-.SH NAME
-checkbutton \- Create and manipulate 'checkbutton' boolean selection widgets
-.SH SYNOPSIS
-\fBcheckbutton\fI pathName \fR?\fIoptions\fR?
-.SO
-\-activebackground	\-disabledforeground	\-padx
-\-activeforeground	\-font	\-pady
-\-anchor	\-foreground	\-relief
-\-background	\-highlightbackground	\-takefocus
-\-bitmap	\-highlightcolor	\-text
-\-borderwidth	\-highlightthickness	\-textvariable
-\-compound	\-image	\-underline
-\-cursor	\-justify	\-wraplength
-.SE
-.SH "WIDGET-SPECIFIC OPTIONS"
-.OP \-command command Command
-Specifies a Tcl command to associate with the button.  This command
-is typically invoked when mouse button 1 is released over the button
-window.  The button's global variable (\fB\-variable\fR option) will
-be updated before the command is invoked.
-.OP \-height height Height
-Specifies a desired height for the button.
-If an image or bitmap is being displayed in the button then the value is in
-screen units (i.e. any of the forms acceptable to \fBTk_GetPixels\fR);
-for text it is in lines of text.
-If this option is not specified, the button's desired height is computed
-from the size of the image or bitmap or text being displayed in it.
-.OP \-indicatoron indicatorOn IndicatorOn
-Specifies whether or not the indicator should be drawn.  Must be a
-proper boolean value.  If false, the \fB\-relief\fR option is
-ignored and the widget's relief is always sunken if the widget is
-selected and raised otherwise.
-.OP \-offrelief offRelief OffRelief
-Specifies the relief for the checkbutton when the indicator is not drawn and
-the checkbutton is off.  The default value is
-.QW raised .
-By setting this option to
-.QW flat
-and setting \fB\-indicatoron\fR to false and \fB\-overrelief\fR to
-.QW raised ,
-the effect is achieved
-of having a flat button that raises on mouse-over and which is
-depressed when activated.  This is the behavior typically exhibited by
-the Bold, Italic, and Underline checkbuttons on the toolbar of a
-word-processor, for example.
-.OP \-offvalue offValue Value
-Specifies value to store in the button's associated variable whenever
-this button is deselected.  Defaults to
-.QW 0 .
-.OP \-onvalue onValue Value
-Specifies value to store in the button's associated variable whenever
-this button is selected.  Defaults to
-.QW 1 .
-.OP \-overrelief overRelief OverRelief
-Specifies an alternative relief for the checkbutton, to be used when the
-mouse cursor is over the widget.  This option can be used to make
-toolbar buttons, by configuring \fB\-relief flat \-overrelief
-raised\fR.  If the value of this option is the empty string, then no
-alternative relief is used when the mouse cursor is over the checkbutton.
-The empty string is the default value.
-.OP \-selectcolor selectColor Background
-Specifies a background color to use when the button is selected.
-If \fBindicatorOn\fR is true then the color is used as the background for
-the indicator regardless of the select state.
-If \fBindicatorOn\fR is false, this color is used as the background
-for the entire widget, in place of \fBbackground\fR or \fBactiveBackground\fR,
-whenever the widget is selected.
-If specified as an empty string then no special color is used for
-displaying when the widget is selected.
-.OP \-selectimage selectImage SelectImage
-Specifies an image to display (in place of the \fB\-image\fR option)
-when the checkbutton is selected.
-This option is ignored unless the \fB\-image\fR option has been
-specified.
-.OP \-state state State
-Specifies one of three states for the checkbutton:  \fBnormal\fR, \fBactive\fR,
-or \fBdisabled\fR.  In normal state the checkbutton is displayed using the
-\fB\-foreground\fR and \fB\-background\fR options.  The active state is
-typically used when the pointer is over the checkbutton.  In active state
-the checkbutton is displayed using the \fB\-activeforeground\fR and
-\fB\-activebackground\fR options.  Disabled state means that the checkbutton
-should be insensitive:  the default bindings will refuse to activate
-the widget and will ignore mouse button presses.
-In this state the \fB\-disabledforeground\fR and
-\fB\-background\fR options determine how the checkbutton is displayed.
-.OP \-tristateimage tristateImage TristateImage
-Specifies an image to display (in place of the \fB\-image\fR option)
-when the checkbutton is in tri-state mode.
-This option is ignored unless the \fB\-image\fR option has been
-specified.
-.OP \-tristatevalue tristateValue Value
-Specifies the value that causes the checkbutton to display the multi-value
-selection, also known as the tri-state mode.  Defaults to
-.QW "" .
-.OP \-variable variable Variable
-Specifies the name of a global variable to set to indicate whether
-or not this button is selected.  Defaults to the name of the
-button within its parent (i.e. the last element of the button
-window's path name).
-.OP \-width width Width
-Specifies a desired width for the button.
-If an image or bitmap is being displayed in the button then the value is in
-screen units (i.e. any of the forms acceptable to \fBTk_GetPixels\fR);
-for text it is in characters.
-If this option is not specified, the button's desired width is computed
-from the size of the image or bitmap or text being displayed in it.
-.BE
-.SH DESCRIPTION
-.PP
-The \fBcheckbutton\fR command creates a new window (given by the
-\fIpathName\fR argument) and makes it into a checkbutton widget.
-Additional
-options, described above, may be specified on the command line
-or in the option database
-to configure aspects of the checkbutton such as its colors, font,
-text, and initial relief.  The \fBcheckbutton\fR command returns its
-\fIpathName\fR argument.  At the time this command is invoked,
-there must not exist a window named \fIpathName\fR, but
-\fIpathName\fR's parent must exist.
-.PP
-A checkbutton is a widget
-that displays a textual string, bitmap or image
-and a square called an \fIindicator\fR.
-If text is displayed, it must all be in a single font, but it
-can occupy multiple lines on the screen (if it contains newlines
-or if wrapping occurs because of the \fB\-wraplength\fR option) and
-one of the characters may optionally be underlined using the
-\fB\-underline\fR option.
-A checkbutton has
-all of the behavior of a simple button, including the
-following: it can display itself in either of three different
-ways, according to the \fB\-state\fR option;
-it can be made to appear
-raised, sunken, or flat; it can be made to flash; and it invokes
-a Tcl command whenever mouse button 1 is clicked over the
-checkbutton.
-.PP
-In addition, checkbuttons can be \fIselected\fR.
-If a checkbutton is selected then the indicator is normally
-drawn with a selected appearance, and
-a Tcl variable associated with the checkbutton is set to a particular
-value (normally 1).
-The indicator is drawn with a check mark inside.
-If the checkbutton is not selected, then the indicator is drawn with a
-deselected appearance, and the associated variable is
-set to a different value (typically 0).
-The indicator is drawn without a check mark inside.  In the special case
-where the variable (if specified) has a value that matches the tristatevalue,
-the indicator is drawn with a tri-state appearance and is in the tri-state
-mode indicating mixed or multiple values.  (This is used when the check
-box represents the state of multiple items.)
-The indicator is drawn in a platform dependent manner.  Under Unix and
-Windows, the background interior of the box is
-.QW grayed .
-Under Mac, the indicator is drawn with a dash mark inside.
-By default, the name of the variable associated with a checkbutton is the
-same as the \fIname\fR used to create the checkbutton.
-The variable name, and the
-.QW on ,
-.QW off
-and
-.QW tristate
-values stored in it, may be modified with options on the command line
-or in the option database.
-Configuration options may also be used to modify the way the
-indicator is displayed (or whether it is displayed at all).
-By default a checkbutton is configured to select and deselect
-itself on alternate button clicks.
-In addition, each checkbutton monitors its associated variable and
-automatically selects and deselects itself when the variables value
-changes to and from the button's
-.QW on ,
-.QW off
-and
-.QW tristate
-values.
-.SH "WIDGET COMMAND"
-.PP
-The \fBcheckbutton\fR command creates a new Tcl command whose
-name is \fIpathName\fR.  This
-command may be used to invoke various
-operations on the widget.  It has the following general form:
-.CS
-\fIpathName option \fR?\fIarg arg ...\fR?
-.CE
-\fIOption\fR and the \fIarg\fRs
-determine the exact behavior of the command.  The following
-commands are possible for checkbutton widgets:
-.TP
-\fIpathName \fBcget\fR \fIoption\fR
-Returns the current value of the configuration option given
-by \fIoption\fR.
-\fIOption\fR may have any of the values accepted by the \fBcheckbutton\fR
-command.
-.TP
-\fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
-Query or modify the configuration options of the widget.
-If no \fIoption\fR is specified, returns a list describing all of
-the available options for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for
-information on the format of this list).  If \fIoption\fR is specified
-with no \fIvalue\fR, then the command returns a list describing the
-one named option (this list will be identical to the corresponding
-sublist of the value returned if no \fIoption\fR is specified).  If
-one or more \fIoption\-value\fR pairs are specified, then the command
-modifies the given widget option(s) to have the given value(s);  in
-this case the command returns an empty string.
-\fIOption\fR may have any of the values accepted by the \fBcheckbutton\fR
-command.
-.TP
-\fIpathName \fBdeselect\fR
-Deselects the checkbutton and sets the associated variable to its
-.QW off
-value.
-.TP
-\fIpathName \fBflash\fR
-Flashes the checkbutton.  This is accomplished by redisplaying the checkbutton
-several times, alternating between active and normal colors.  At
-the end of the flash the checkbutton is left in the same normal/active
-state as when the command was invoked.
-This command is ignored if the checkbutton's state is \fBdisabled\fR.
-.TP
-\fIpathName \fBinvoke\fR
-Does just what would have happened if the user invoked the checkbutton
-with the mouse: toggle the selection state of the button and invoke
-the Tcl command associated with the checkbutton, if there is one.
-The return value is the return value from the Tcl command, or an
-empty string if there is no command associated with the checkbutton.
-This command is ignored if the checkbutton's state is \fBdisabled\fR.
-.TP
-\fIpathName \fBselect\fR
-Selects the checkbutton and sets the associated variable to its
-.QW on
-value.
-.TP
-\fIpathName \fBtoggle\fR
-Toggles the selection state of the button, redisplaying it and
-modifying its associated variable to reflect the new state.
-.SH BINDINGS
-.PP
-Tk automatically creates class bindings for checkbuttons that give them
-the following default behavior:
-.IP [1]
-On Unix systems, a checkbutton activates whenever the mouse passes
-over it and deactivates whenever the mouse leaves the checkbutton.  On
-Mac and Windows systems, when mouse button 1 is pressed over a
-checkbutton, the button activates whenever the mouse pointer is inside
-the button, and deactivates whenever the mouse pointer leaves the
-button.
-.IP [2]
-When mouse button 1 is pressed over a checkbutton, it is invoked (its
-selection state toggles and the command associated with the button is
-invoked, if there is one).
-.IP [3]
-When a checkbutton has the input focus, the space key causes the checkbutton
-to be invoked.  Under Windows, there are additional key bindings; plus
-(\fB+\fR) and equal (\fB=\fR) select the button, and minus (\fB\-\fR)
-deselects the button.
-.PP
-If the checkbutton's state is \fBdisabled\fR then none of the above
-actions occur:  the checkbutton is completely non-responsive.
-.PP
-The behavior of checkbuttons can be changed by defining new bindings for
-individual widgets or by redefining the class bindings.
-.SH EXAMPLE
-.PP
-This example shows a group of uncoupled checkbuttons.
-.PP
-.CS
-labelframe .lbl \-text "Steps:"
-\fBcheckbutton\fR .c1 \-text Lights  \-variable lights
-\fBcheckbutton\fR .c2 \-text Cameras \-variable cameras
-\fBcheckbutton\fR .c3 \-text Action! \-variable action
-pack .c1 .c2 .c3 \-in .lbl
-pack .lbl
-.CE
-.SH "SEE ALSO"
-button(n), options(n), radiobutton(n), ttk::checkbutton(n)
-.SH KEYWORDS
-checkbutton, widget
-'\" Local Variables:
-'\" mode: nroff
-'\" End: