diff options
Diffstat (limited to 'funtools/util/zlib-1.2.3/contrib/iostream2/zstream.h')
-rw-r--r-- | funtools/util/zlib-1.2.3/contrib/iostream2/zstream.h | 307 |
1 files changed, 307 insertions, 0 deletions
diff --git a/funtools/util/zlib-1.2.3/contrib/iostream2/zstream.h b/funtools/util/zlib-1.2.3/contrib/iostream2/zstream.h new file mode 100644 index 0000000..43d2332 --- /dev/null +++ b/funtools/util/zlib-1.2.3/contrib/iostream2/zstream.h @@ -0,0 +1,307 @@ +/* + * + * Copyright (c) 1997 + * Christian Michelsen Research AS + * Advanced Computing + * Fantoftvegen 38, 5036 BERGEN, Norway + * http://www.cmr.no + * + * Permission to use, copy, modify, distribute and sell this software + * and its documentation for any purpose is hereby granted without fee, + * provided that the above copyright notice appear in all copies and + * that both that copyright notice and this permission notice appear + * in supporting documentation. Christian Michelsen Research AS makes no + * representations about the suitability of this software for any + * purpose. It is provided "as is" without express or implied warranty. + * + */ + +#ifndef ZSTREAM__H +#define ZSTREAM__H + +/* + * zstream.h - C++ interface to the 'zlib' general purpose compression library + * $Id: zstream.h 1.1 1997-06-25 12:00:56+02 tyge Exp tyge $ + */ + +#include <strstream.h> +#include <string.h> +#include <stdio.h> +#include "zlib.h" + +#if defined(_WIN32) +# include <fcntl.h> +# include <io.h> +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +class zstringlen { +public: + zstringlen(class izstream&); + zstringlen(class ozstream&, const char*); + size_t value() const { return val.word; } +private: + struct Val { unsigned char byte; size_t word; } val; +}; + +// ----------------------------- izstream ----------------------------- + +class izstream +{ + public: + izstream() : m_fp(0) {} + izstream(FILE* fp) : m_fp(0) { open(fp); } + izstream(const char* name) : m_fp(0) { open(name); } + ~izstream() { close(); } + + /* Opens a gzip (.gz) file for reading. + * open() can be used to read a file which is not in gzip format; + * in this case read() will directly read from the file without + * decompression. errno can be checked to distinguish two error + * cases (if errno is zero, the zlib error is Z_MEM_ERROR). + */ + void open(const char* name) { + if (m_fp) close(); + m_fp = ::gzopen(name, "rb"); + } + + void open(FILE* fp) { + SET_BINARY_MODE(fp); + if (m_fp) close(); + m_fp = ::gzdopen(fileno(fp), "rb"); + } + + /* Flushes all pending input if necessary, closes the compressed file + * and deallocates all the (de)compression state. The return value is + * the zlib error number (see function error() below). + */ + int close() { + int r = ::gzclose(m_fp); + m_fp = 0; return r; + } + + /* Binary read the given number of bytes from the compressed file. + */ + int read(void* buf, size_t len) { + return ::gzread(m_fp, buf, len); + } + + /* Returns the error message for the last error which occurred on the + * given compressed file. errnum is set to zlib error number. If an + * error occurred in the file system and not in the compression library, + * errnum is set to Z_ERRNO and the application may consult errno + * to get the exact error code. + */ + const char* error(int* errnum) { + return ::gzerror(m_fp, errnum); + } + + gzFile fp() { return m_fp; } + + private: + gzFile m_fp; +}; + +/* + * Binary read the given (array of) object(s) from the compressed file. + * If the input file was not in gzip format, read() copies the objects number + * of bytes into the buffer. + * returns the number of uncompressed bytes actually read + * (0 for end of file, -1 for error). + */ +template <class T, class Items> +inline int read(izstream& zs, T* x, Items items) { + return ::gzread(zs.fp(), x, items*sizeof(T)); +} + +/* + * Binary input with the '>' operator. + */ +template <class T> +inline izstream& operator>(izstream& zs, T& x) { + ::gzread(zs.fp(), &x, sizeof(T)); + return zs; +} + + +inline zstringlen::zstringlen(izstream& zs) { + zs > val.byte; + if (val.byte == 255) zs > val.word; + else val.word = val.byte; +} + +/* + * Read length of string + the string with the '>' operator. + */ +inline izstream& operator>(izstream& zs, char* x) { + zstringlen len(zs); + ::gzread(zs.fp(), x, len.value()); + x[len.value()] = '\0'; + return zs; +} + +inline char* read_string(izstream& zs) { + zstringlen len(zs); + char* x = new char[len.value()+1]; + ::gzread(zs.fp(), x, len.value()); + x[len.value()] = '\0'; + return x; +} + +// ----------------------------- ozstream ----------------------------- + +class ozstream +{ + public: + ozstream() : m_fp(0), m_os(0) { + } + ozstream(FILE* fp, int level = Z_DEFAULT_COMPRESSION) + : m_fp(0), m_os(0) { + open(fp, level); + } + ozstream(const char* name, int level = Z_DEFAULT_COMPRESSION) + : m_fp(0), m_os(0) { + open(name, level); + } + ~ozstream() { + close(); + } + + /* Opens a gzip (.gz) file for writing. + * The compression level parameter should be in 0..9 + * errno can be checked to distinguish two error cases + * (if errno is zero, the zlib error is Z_MEM_ERROR). + */ + void open(const char* name, int level = Z_DEFAULT_COMPRESSION) { + char mode[4] = "wb\0"; + if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level; + if (m_fp) close(); + m_fp = ::gzopen(name, mode); + } + + /* open from a FILE pointer. + */ + void open(FILE* fp, int level = Z_DEFAULT_COMPRESSION) { + SET_BINARY_MODE(fp); + char mode[4] = "wb\0"; + if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level; + if (m_fp) close(); + m_fp = ::gzdopen(fileno(fp), mode); + } + + /* Flushes all pending output if necessary, closes the compressed file + * and deallocates all the (de)compression state. The return value is + * the zlib error number (see function error() below). + */ + int close() { + if (m_os) { + ::gzwrite(m_fp, m_os->str(), m_os->pcount()); + delete[] m_os->str(); delete m_os; m_os = 0; + } + int r = ::gzclose(m_fp); m_fp = 0; return r; + } + + /* Binary write the given number of bytes into the compressed file. + */ + int write(const void* buf, size_t len) { + return ::gzwrite(m_fp, (voidp) buf, len); + } + + /* Flushes all pending output into the compressed file. The parameter + * _flush is as in the deflate() function. The return value is the zlib + * error number (see function gzerror below). flush() returns Z_OK if + * the flush_ parameter is Z_FINISH and all output could be flushed. + * flush() should be called only when strictly necessary because it can + * degrade compression. + */ + int flush(int _flush) { + os_flush(); + return ::gzflush(m_fp, _flush); + } + + /* Returns the error message for the last error which occurred on the + * given compressed file. errnum is set to zlib error number. If an + * error occurred in the file system and not in the compression library, + * errnum is set to Z_ERRNO and the application may consult errno + * to get the exact error code. + */ + const char* error(int* errnum) { + return ::gzerror(m_fp, errnum); + } + + gzFile fp() { return m_fp; } + + ostream& os() { + if (m_os == 0) m_os = new ostrstream; + return *m_os; + } + + void os_flush() { + if (m_os && m_os->pcount()>0) { + ostrstream* oss = new ostrstream; + oss->fill(m_os->fill()); + oss->flags(m_os->flags()); + oss->precision(m_os->precision()); + oss->width(m_os->width()); + ::gzwrite(m_fp, m_os->str(), m_os->pcount()); + delete[] m_os->str(); delete m_os; m_os = oss; + } + } + + private: + gzFile m_fp; + ostrstream* m_os; +}; + +/* + * Binary write the given (array of) object(s) into the compressed file. + * returns the number of uncompressed bytes actually written + * (0 in case of error). + */ +template <class T, class Items> +inline int write(ozstream& zs, const T* x, Items items) { + return ::gzwrite(zs.fp(), (voidp) x, items*sizeof(T)); +} + +/* + * Binary output with the '<' operator. + */ +template <class T> +inline ozstream& operator<(ozstream& zs, const T& x) { + ::gzwrite(zs.fp(), (voidp) &x, sizeof(T)); + return zs; +} + +inline zstringlen::zstringlen(ozstream& zs, const char* x) { + val.byte = 255; val.word = ::strlen(x); + if (val.word < 255) zs < (val.byte = val.word); + else zs < val; +} + +/* + * Write length of string + the string with the '<' operator. + */ +inline ozstream& operator<(ozstream& zs, const char* x) { + zstringlen len(zs, x); + ::gzwrite(zs.fp(), (voidp) x, len.value()); + return zs; +} + +#ifdef _MSC_VER +inline ozstream& operator<(ozstream& zs, char* const& x) { + return zs < (const char*) x; +} +#endif + +/* + * Ascii write with the << operator; + */ +template <class T> +inline ostream& operator<<(ozstream& zs, const T& x) { + zs.os_flush(); + return zs.os() << x; +} + +#endif |