diff options
Diffstat (limited to 'openssl/apps/makeapps.com')
-rw-r--r-- | openssl/apps/makeapps.com | 1184 |
1 files changed, 0 insertions, 1184 deletions
diff --git a/openssl/apps/makeapps.com b/openssl/apps/makeapps.com deleted file mode 100644 index 97dff41..0000000 --- a/openssl/apps/makeapps.com +++ /dev/null @@ -1,1184 +0,0 @@ -$! -$! MAKEAPPS.COM -$! Written By: Robert Byer -$! Vice-President -$! A-Com Computing, Inc. -$! byer@mail.all-net.net -$! -$! Changes by Richard Levitte <richard@levitte.org> -$! Zoltan Arpadffy <zoli@polarhome.com> -$! -$! This command files compiles and creates all the various different -$! "application" programs for the different types of encryption for OpenSSL. -$! The EXE's are placed in the directory [.xxx.EXE.APPS] where "xxx" denotes -$! ALPHA, IA64 or VAX, depending on your machine architecture. -$! -$! It was written so it would try to determine what "C" compiler to -$! use or you can specify which "C" compiler to use. -$! -$! Specify DEBUG or NODEBUG as P1 to compile with or without debugger -$! information. -$! -$! Specify which compiler at P2 to try to compile under. -$! -$! VAXC For VAX C. -$! DECC For DEC C. -$! GNUC For GNU C. -$! -$! If you don't specify a compiler, it will try to determine which -$! "C" compiler to use. -$! -$! P3, if defined, sets a TCP/IP library to use, through one of the following -$! keywords: -$! -$! UCX for UCX -$! SOCKETSHR for SOCKETSHR+NETLIB -$! TCPIP for TCPIP (post UCX) -$! -$! P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up) -$! -$! P5, if defined, sets a choice of programs to compile. -$! -$! P6, if defined, specifies the C pointer size. Ignored on VAX. -$! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.) -$! Supported values are: -$! -$! "" Compile with default (/NOPOINTER_SIZE) -$! 32 Compile with /POINTER_SIZE=32 (SHORT) -$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]) -$! (Automatically select ARGV if compiler supports it.) -$! 64= Compile with /POINTER_SIZE=64 (LONG). -$! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV). -$! -$! P7, if defined, specifies a directory where ZLIB files (zlib.h, -$! libz.olb) may be found. Optionally, a non-default object library -$! name may be included ("dev:[dir]libz_64.olb", for example). -$! -$! -$! Announce/identify. -$! -$ proc = f$environment( "procedure") -$ write sys$output "@@@ "+ - - f$parse( proc, , , "name")+ f$parse( proc, , , "type") -$! -$ on control_c then goto exit -$! -$! Define A TCP/IP Library That We Will Need To Link To. -$! (That Is, If We Need To Link To One.) -$! -$ TCPIP_LIB = "" -$ ZLIB_LIB = "" -$! -$! Check What Architecture We Are Using. -$! -$ IF (F$GETSYI("CPU").LT.128) -$ THEN -$! -$! The Architecture Is VAX. -$! -$ ARCH = "VAX" -$! -$! Else... -$! -$ ELSE -$! -$! The Architecture Is Alpha, IA64 or whatever comes in the future. -$! -$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE") -$ IF (ARCH .EQS. "") THEN ARCH = "UNK" -$! -$! End The Architecture Check. -$! -$ ENDIF -$! -$ ARCHD = ARCH -$ LIB32 = "32" -$ OPT_FILE = "" -$ POINTER_SIZE = "" -$! -$! Define what programs should be compiled -$! -$ PROGRAMS := OPENSSL -$! -$! Check To Make Sure We Have Valid Command Line Parameters. -$! -$ GOSUB CHECK_OPTIONS -$! -$! Define The CRYPTO Library. -$! -$ CRYPTO_LIB := SYS$DISK:[-.'ARCHD'.EXE.CRYPTO]SSL_LIBCRYPTO'LIB32'.OLB -$! -$! Define The SSL Library. -$! -$ SSL_LIB := SYS$DISK:[-.'ARCHD'.EXE.SSL]SSL_LIBSSL'LIB32'.OLB -$! -$! Define The OBJ and EXE Directories. -$! -$ OBJ_DIR := SYS$DISK:[-.'ARCHD'.OBJ.APPS] -$ EXE_DIR := SYS$DISK:[-.'ARCHD'.EXE.APPS] -$! -$! Specify the destination directory in any /MAP option. -$! -$ if (LINKMAP .eqs. "MAP") -$ then -$ LINKMAP = LINKMAP+ "=''EXE_DIR'" -$ endif -$! -$! Add the location prefix to the linker options file name. -$! -$ if (OPT_FILE .nes. "") -$ then -$ OPT_FILE = EXE_DIR+ OPT_FILE -$ endif -$! -$! Initialise logical names and such -$! -$ GOSUB INITIALISE -$! -$! Tell The User What Kind of Machine We Run On. -$! -$ WRITE SYS$OUTPUT "Host system architecture: ''ARCHD'" -$! -$! Check To See If The OBJ Directory Exists. -$! -$ IF (F$PARSE(OBJ_DIR).EQS."") -$ THEN -$! -$! It Dosen't Exist, So Create It. -$! -$ CREATE/DIRECTORY 'OBJ_DIR' -$! -$! End The OBJ Directory Check. -$! -$ ENDIF -$! -$! Check To See If The EXE Directory Exists. -$! -$ IF (F$PARSE(EXE_DIR).EQS."") -$ THEN -$! -$! It Dosen't Exist, So Create It. -$! -$ CREATE/DIRECTORY 'EXE_DIR' -$! -$! End The EXE Directory Check. -$! -$ ENDIF -$! -$! Check To See If We Have The Proper Libraries. -$! -$ GOSUB LIB_CHECK -$! -$! Check To See If We Have A Linker Option File. -$! -$ GOSUB CHECK_OPT_FILE -$! -$! Define The Application Files. -$! NOTE: Some might think this list ugly. However, it's made this way to -$! reflect the E_OBJ variable in Makefile as closely as possible, thereby -$! making it fairly easy to verify that the lists are the same. -$! -$ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+- - "CA,PKCS7,CRL2P7,CRL,"+- - "RSA,RSAUTL,DSA,DSAPARAM,EC,ECPARAM,"+- - "X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+- - "S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+- - "CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ - - "SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS,SRP" -$! -$ LIB_OPENSSL = LIB_OPENSSL+ ",VMS_DECC_INIT,VMS_TERM_SOCK" -$! -$ TCPIP_PROGRAMS = ",," -$ IF COMPILER .EQS. "VAXC" THEN - - TCPIP_PROGRAMS = ",OPENSSL," -$! -$! Setup exceptional compilations -$! -$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT," -$! -$ PHASE := LIB -$! -$ RESTART: -$! -$! Define An App Counter And Set It To "0". -$! -$ APP_COUNTER = 0 -$! -$! Top Of The App Loop. -$! -$ NEXT_APP: -$! -$! Make The Application File Name -$! -$ CURRENT_APP = F$EDIT(F$ELEMENT(APP_COUNTER,",",PROGRAMS),"TRIM") -$! -$! Create The Executable File Name. -$! -$ EXE_FILE = EXE_DIR + CURRENT_APP + ".EXE" -$! -$! Check To See If We Are At The End Of The File List. -$! -$ IF (CURRENT_APP.EQS.",") -$ THEN -$ IF (PHASE.EQS."LIB") -$ THEN -$ PHASE := APP -$ GOTO RESTART -$ ELSE -$ GOTO APP_DONE -$ ENDIF -$ ENDIF -$! -$! Increment The Counter. -$! -$ APP_COUNTER = APP_COUNTER + 1 -$! -$! Decide if we're building the object files or not. -$! -$ IF (PHASE.EQS."LIB") -$ THEN -$! -$! Define A Library File Counter And Set It To "-1". -$! -1 Means The Application File Name Is To Be Used. -$! -$ LIB_COUNTER = -1 -$! -$! Create a .OPT file for the object files -$! -$ OPEN /WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT -$! -$! Top Of The File Loop. -$! -$ NEXT_LIB: -$! -$! O.K, Extract The File Name From The File List. -$! -$ IF LIB_COUNTER .GE. 0 -$ THEN -$ FILE_NAME = F$EDIT(F$ELEMENT(LIB_COUNTER,",",LIB_'CURRENT_APP'),"TRIM") -$ ELSE -$ FILE_NAME = CURRENT_APP -$ ENDIF -$! -$! Check To See If We Are At The End Of The File List. -$! -$ IF (FILE_NAME.EQS.",") -$ THEN -$ CLOSE OBJECTS -$ GOTO NEXT_APP -$ ENDIF -$! -$! Increment The Counter. -$! -$ LIB_COUNTER = LIB_COUNTER + 1 -$! -$! Create The Source File Name. -$! -$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C" -$! -$! Create The Object File Name. -$! -$ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ" -$ ON WARNING THEN GOTO NEXT_LIB -$! -$! Check To See If The File We Want To Compile Actually Exists. -$! -$ IF (F$SEARCH(SOURCE_FILE).EQS."") -$ THEN -$! -$! Tell The User That The File Dosen't Exist. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist." -$ WRITE SYS$OUTPUT "" -$! -$! Exit The Build. -$! -$ GOTO EXIT -$! -$! End The File Exist Check. -$! -$ ENDIF -$! -$! Tell The User What We Are Building. -$! -$ IF (PHASE.EQS."LIB") -$ THEN -$ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File." -$ ELSE -$ WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program." -$ ENDIF -$! -$! Compile The File. -$! -$ ON ERROR THEN GOTO NEXT_LIB -$ IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2 -$ THEN -$ CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ELSE -$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ENDIF -$ WRITE OBJECTS OBJECT_FILE -$! -$ GOTO NEXT_LIB -$ ENDIF -$! -$! Check if this program works well without a TCPIP library -$! -$ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - CURRENT_APP .NES. TCPIP_PROGRAMS -$ THEN -$ WRITE SYS$OUTPUT CURRENT_APP," needs a TCP/IP library. Can't link. Skipping..." -$ GOTO NEXT_APP -$ ENDIF -$! -$! Link The Program. -$! -$ ON WARNING THEN GOTO NEXT_APP -$! -$! Don't Link With The RSAREF Routines And TCP/IP Library. -$! -$ LINK /'DEBUGGER' /'LINKMAP' /'TRACEBACK' /EXE='EXE_FILE' - - 'EXE_DIR''CURRENT_APP'.OPT /OPTIONS, - - 'SSL_LIB' /LIBRARY, - - 'CRYPTO_LIB' /LIBRARY - - 'TCPIP_LIB' - - 'ZLIB_LIB' - - ,'OPT_FILE' /OPTIONS -$! -$! Go Back And Do It Again. -$! -$ GOTO NEXT_APP -$! -$! All Done With This File. -$! -$ APP_DONE: -$ EXIT: -$! -$! All Done, Time To Clean Up And Exit. -$! -$ GOSUB CLEANUP -$ EXIT -$! -$! Check For The Link Option FIle. -$! -$ CHECK_OPT_FILE: -$! -$! Check To See If We Need To Make A VAX C Option File. -$! -$ IF (COMPILER.EQS."VAXC") -$ THEN -$! -$! Check To See If We Already Have A VAX C Linker Option File. -$! -$ IF (F$SEARCH(OPT_FILE).EQS."") -$ THEN -$! -$! We Need A VAX C Linker Option File. -$! -$ CREATE 'OPT_FILE' -$DECK -! -! Default System Options File To Link Against -! The Sharable VAX C Runtime Library. -! -SYS$SHARE:VAXCRTL.EXE/SHARE -$EOD -$! -$! End The Option File Check. -$! -$ ENDIF -$! -$! End The VAXC Check. -$! -$ ENDIF -$! -$! Check To See If We Need A GNU C Option File. -$! -$ IF (COMPILER.EQS."GNUC") -$ THEN -$! -$! Check To See If We Already Have A GNU C Linker Option File. -$! -$ IF (F$SEARCH(OPT_FILE).EQS."") -$ THEN -$! -$! We Need A GNU C Linker Option File. -$! -$ CREATE 'OPT_FILE' -$DECK -! -! Default System Options File To Link Against -! The Sharable C Runtime Library. -! -GNU_CC:[000000]GCCLIB/LIBRARY -SYS$SHARE:VAXCRTL/SHARE -$EOD -$! -$! End The Option File Check. -$! -$ ENDIF -$! -$! End The GNU C Check. -$! -$ ENDIF -$! -$! Check To See If We Need A DEC C Option File. -$! -$ IF (COMPILER.EQS."DECC") -$ THEN -$! -$! Check To See If We Already Have A DEC C Linker Option File. -$! -$ IF (F$SEARCH(OPT_FILE).EQS."") -$ THEN -$! -$! Figure Out If We Need An AXP Or A VAX Linker Option File. -$! -$ IF ARCH.EQS."VAX" -$ THEN -$! -$! We Need A DEC C Linker Option File For VAX. -$! -$ CREATE 'OPT_FILE' -$DECK -! -! Default System Options File To Link Against -! The Sharable DEC C Runtime Library. -! -SYS$SHARE:DECC$SHR.EXE/SHARE -$EOD -$! -$! Else... -$! -$ ELSE -$! -$! Create The non-VAX Linker Option File. -$! -$ CREATE 'OPT_FILE' -$DECK -! -! Default System Options File For non-VAX To Link Against -! The Sharable C Runtime Library. -! -SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE -SYS$SHARE:CMA$OPEN_RTL/SHARE -$EOD -$! -$! End The DEC C Option File Check. -$! -$ ENDIF -$! -$! End The Option File Search. -$! -$ ENDIF -$! -$! End The DEC C Check. -$! -$ ENDIF -$! -$! Tell The User What Linker Option File We Are Using. -$! -$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"." -$! -$! Time To RETURN. -$! -$ RETURN -$! -$! Check To See If We Have The Appropiate Libraries. -$! -$ LIB_CHECK: -$! -$! Look For The Library LIBCRYPTO.OLB. -$! -$ IF (F$SEARCH(CRYPTO_LIB).EQS."") -$ THEN -$! -$! Tell The User We Can't Find The LIBCRYPTO.OLB Library. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Can't Find The Library ",CRYPTO_LIB,"." -$ WRITE SYS$OUTPUT "We Can't Link Without It." -$ WRITE SYS$OUTPUT "" -$! -$! Since We Can't Link Without It, Exit. -$! -$ EXIT -$! -$! End The Crypto Library Check. -$! -$ ENDIF -$! -$! Look For The Library LIBSSL.OLB. -$! -$ IF (F$SEARCH(SSL_LIB).EQS."") -$ THEN -$! -$! Tell The User We Can't Find The LIBSSL.OLB Library. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Can't Find The Library ",SSL_LIB,"." -$ WRITE SYS$OUTPUT "Some Of The Test Programs Need To Link To It." -$ WRITE SYS$OUTPUT "" -$! -$! Since We Can't Link Without It, Exit. -$! -$ EXIT -$! -$! End The SSL Library Check. -$! -$ ENDIF -$! -$! Time To Return. -$! -$ RETURN -$! -$! Check The User's Options. -$! -$ CHECK_OPTIONS: -$! -$! Check To See If P1 Is Blank. -$! -$ IF (P1.EQS."NODEBUG") -$ THEN -$! -$! P1 Is NODEBUG, So Compile Without Debugger Information. -$! -$ DEBUGGER = "NODEBUG" -$ LINKMAP = "NOMAP" -$ TRACEBACK = "NOTRACEBACK" -$ GCC_OPTIMIZE = "OPTIMIZE" -$ CC_OPTIMIZE = "OPTIMIZE" -$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile." -$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization." -$! -$! Else... -$! -$ ELSE -$! -$! Check To See If We Are To Compile With Debugger Information. -$! -$ IF (P1.EQS."DEBUG") -$ THEN -$! -$! Compile With Debugger Information. -$! -$ DEBUGGER = "DEBUG" -$ LINKMAP = "MAP" -$ TRACEBACK = "TRACEBACK" -$ GCC_OPTIMIZE = "NOOPTIMIZE" -$ CC_OPTIMIZE = "NOOPTIMIZE" -$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile." -$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization." -$ ELSE -$! -$! Tell The User Entered An Invalid Option. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information." -$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$! -$! End The Valid Argument Check. -$! -$ ENDIF -$! -$! End The P1 Check. -$! -$ ENDIF -$! -$! Check P6 (POINTER_SIZE). -$! -$ IF (P6 .NES. "") .AND. (ARCH .NES. "VAX") -$ THEN -$! -$ IF (P6 .EQS. "32") -$ THEN -$ POINTER_SIZE = " /POINTER_SIZE=32" -$ ELSE -$ POINTER_SIZE = F$EDIT( P6, "COLLAPSE, UPCASE") -$ IF ((POINTER_SIZE .EQS. "64") .OR. - - (POINTER_SIZE .EQS. "64=") .OR. - - (POINTER_SIZE .EQS. "64=ARGV")) -$ THEN -$ ARCHD = ARCH+ "_64" -$ LIB32 = "" -$ IF (F$EXTRACT( 2, 1, POINTER_SIZE) .EQS. "=") -$ THEN -$! Explicit user choice: "64" or "64=ARGV". -$ IF (POINTER_SIZE .EQS. "64=") THEN POINTER_SIZE = "64" -$ ELSE -$ SET NOON -$ DEFINE /USER_MODE SYS$OUTPUT NL: -$ DEFINE /USER_MODE SYS$ERROR NL: -$ CC /NOLIST /NOOBJECT /POINTER_SIZE=64=ARGV NL: -$ IF ($STATUS .AND. %X0FFF0000) .EQ. %X00030000 -$ THEN -$ ! If we got here, it means DCL complained like this: -$ ! %DCL-W-NOVALU, value not allowed - remove value specification -$ ! \64=\ -$ ! -$ ! If the compiler was run, logicals defined in /USER would -$ ! have been deassigned automatically. However, when DCL -$ ! complains, they aren't, so we do it here (it might be -$ ! unnecessary, but just in case there will be another error -$ ! message further on that we don't want to miss) -$ DEASSIGN /USER_MODE SYS$ERROR -$ DEASSIGN /USER_MODE SYS$OUTPUT -$ ELSE -$ POINTER_SIZE = POINTER_SIZE + "=ARGV" -$ ENDIF -$ SET ON -$ ENDIF -$ POINTER_SIZE = " /POINTER_SIZE=''POINTER_SIZE'" -$! -$ ELSE -$! -$! Tell The User Entered An Invalid Option. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ", P6, - - " Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT - - " """" : Compile with default (short) pointers." -$ WRITE SYS$OUTPUT - - " 32 : Compile with 32-bit (short) pointers." -$ WRITE SYS$OUTPUT - - " 64 : Compile with 64-bit (long) pointers (auto ARGV)." -$ WRITE SYS$OUTPUT - - " 64= : Compile with 64-bit (long) pointers (no ARGV)." -$ WRITE SYS$OUTPUT - - " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$! -$ ENDIF -$! -$ ENDIF -$! -$! End The P6 (POINTER_SIZE) Check. -$! -$ ENDIF -$! -$! Set basic C compiler /INCLUDE directories. -$! -$ CC_INCLUDES = "SYS$DISK:[-],SYS$DISK:[-.CRYPTO]" -$! -$! Check To See If P2 Is Blank. -$! -$ IF (P2.EQS."") -$ THEN -$! -$! O.K., The User Didn't Specify A Compiler, Let's Try To -$! Find Out Which One To Use. -$! -$! Check To See If We Have GNU C. -$! -$ IF (F$TRNLNM("GNU_CC").NES."") -$ THEN -$! -$! Looks Like GNUC, Set To Use GNUC. -$! -$ P2 = "GNUC" -$! -$! Else... -$! -$ ELSE -$! -$! Check To See If We Have VAXC Or DECC. -$! -$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."") -$ THEN -$! -$! Looks Like DECC, Set To Use DECC. -$! -$ P2 = "DECC" -$! -$! Else... -$! -$ ELSE -$! -$! Looks Like VAXC, Set To Use VAXC. -$! -$ P2 = "VAXC" -$! -$! End The VAXC Compiler Check. -$! -$ ENDIF -$! -$! End The DECC & VAXC Compiler Check. -$! -$ ENDIF -$! -$! End The Compiler Check. -$! -$ ENDIF -$! -$! Check To See If We Have A Option For P3. -$! -$ IF (P3.EQS."") -$ THEN -$! -$! Find out what socket library we have available -$! -$ IF F$PARSE("SOCKETSHR:") .NES. "" -$ THEN -$! -$! We have SOCKETSHR, and it is my opinion that it's the best to use. -$! -$ P3 = "SOCKETSHR" -$! -$! Tell the user -$! -$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP" -$! -$! Else, let's look for something else -$! -$ ELSE -$! -$! Like UCX (the reason to do this before Multinet is that the UCX -$! emulation is easier to use...) -$! -$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" - - .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" - - .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. "" -$ THEN -$! -$! Last resort: a UCX or UCX-compatible library -$! -$ P3 = "UCX" -$! -$! Tell the user -$! -$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP" -$! -$! That was all... -$! -$ ENDIF -$ ENDIF -$ ENDIF -$! -$! Set Up Initial CC Definitions, Possibly With User Ones -$! -$ CCDEFS = "MONOLITH" -$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS -$ CCEXTRAFLAGS = "" -$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS -$ CCDISABLEWARNINGS = "" !!! "MAYLOSEDATA3" !!! "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR" -$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" -$ THEN -$ IF CCDISABLEWARNINGS .NES. THEN CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," -$ CCDISABLEWARNINGS = CCDISABLEWARNINGS + USER_CCDISABLEWARNINGS -$ ENDIF -$! -$! Check To See If We Have A ZLIB Option. -$! -$ ZLIB = P7 -$ IF (ZLIB .NES. "") -$ THEN -$! -$! Check for expected ZLIB files. -$! -$ err = 0 -$ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY") -$ if (f$search( file1) .eqs. "") -$ then -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid." -$ WRITE SYS$OUTPUT " Can't find header: ''file1'" -$ err = 1 -$ endif -$ file1 = f$parse( "A.;", ZLIB)- "A.;" -$! -$ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY") -$ if (f$search( file2) .eqs. "") -$ then -$ if (err .eq. 0) -$ then -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid." -$ endif -$ WRITE SYS$OUTPUT " Can't find library: ''file2'" -$ WRITE SYS$OUTPUT "" -$ err = err+ 2 -$ endif -$ if (err .eq. 1) -$ then -$ WRITE SYS$OUTPUT "" -$ endif -$! -$ if (err .ne. 0) -$ then -$ EXIT -$ endif -$! -$ CCDEFS = """ZLIB=1"", "+ CCDEFS -$ CC_INCLUDES = CC_INCLUDES+ ", "+ file1 -$ ZLIB_LIB = ", ''file2' /library" -$! -$! Print info -$! -$ WRITE SYS$OUTPUT "ZLIB library spec: ", file2 -$! -$! End The ZLIB Check. -$! -$ ENDIF -$! -$! Check To See If The User Entered A Valid Parameter. -$! -$ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC") -$ THEN -$! -$! Check To See If The User Wanted DECC. -$! -$ IF (P2.EQS."DECC") -$ THEN -$! -$! Looks Like DECC, Set To Use DECC. -$! -$ COMPILER = "DECC" -$! -$! Tell The User We Are Using DECC. -$! -$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." -$! -$! Use DECC... -$! -$ CC = "CC" -$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" - - THEN CC = "CC/DECC" -$ CC = CC + " /''CC_OPTIMIZE' /''DEBUGGER' /STANDARD=RELAXED"+ - - "''POINTER_SIZE' /NOLIST /PREFIX=ALL" + - - " /INCLUDE=(''CC_INCLUDES') " + CCEXTRAFLAGS -$! -$! Define The Linker Options File Name. -$! -$ OPT_FILE = "VAX_DECC_OPTIONS.OPT" -$! -$! End DECC Check. -$! -$ ENDIF -$! -$! Check To See If We Are To Use VAXC. -$! -$ IF (P2.EQS."VAXC") -$ THEN -$! -$! Looks Like VAXC, Set To Use VAXC. -$! -$ COMPILER = "VAXC" -$! -$! Tell The User We Are Using VAX C. -$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." -$! -$! Compile Using VAXC. -$! -$ CC = "CC" -$ IF ARCH.NES."VAX" -$ THEN -$ WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!" -$ EXIT -$ ENDIF -$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC" -$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - - "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS -$ CCDEFS = CCDEFS + ",""VAXC""" -$! -$! Define <sys> As SYS$COMMON:[SYSLIB] -$! -$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB] -$! -$! Define The Linker Options File Name. -$! -$ OPT_FILE = "VAX_VAXC_OPTIONS.OPT" -$! -$! End VAXC Check -$! -$ ENDIF -$! -$! Check To See If We Are To Use GNU C. -$! -$ IF (P2.EQS."GNUC") -$ THEN -$! -$! Looks Like GNUC, Set To Use GNUC. -$! -$ COMPILER = "GNUC" -$! -$! Tell The User We Are Using GNUC. -$! -$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." -$! -$! Use GNU C... -$! -$ IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC -$ CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - - "/INCLUDE=(''CC_INCLUDES')" + CCEXTRAFLAGS -$! -$! Define The Linker Options File Name. -$! -$ OPT_FILE = "VAX_GNUC_OPTIONS.OPT" -$! -$! End The GNU C Check. -$! -$ ENDIF -$! -$! Set up default defines -$! -$ CCDEFS = """FLAT_INC=1""," + CCDEFS -$! -$! Else The User Entered An Invalid Argument. -$! -$ ELSE -$! -$! Tell The User We Don't Know What They Want. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C." -$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C." -$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$ ENDIF -$! -$! Time to check the contents, and to make sure we get the correct library. -$! -$ IF P3.EQS."SOCKETSHR" .OR. P3.EQS."MULTINET" .OR. P3.EQS."UCX" - - .OR. P3.EQS."TCPIP" .OR. P3.EQS."NONE" -$ THEN -$! -$! Check to see if SOCKETSHR was chosen -$! -$ IF P3.EQS."SOCKETSHR" -$ THEN -$! -$! Set the library to use SOCKETSHR -$! -$ TCPIP_LIB = ",SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS" -$! -$! Done with SOCKETSHR -$! -$ ENDIF -$! -$! Check to see if MULTINET was chosen -$! -$ IF P3.EQS."MULTINET" -$ THEN -$! -$! Set the library to use UCX emulation. -$! -$ P3 = "UCX" -$! -$! Done with MULTINET -$! -$ ENDIF -$! -$! Check to see if UCX was chosen -$! -$ IF P3.EQS."UCX" -$ THEN -$! -$! Set the library to use UCX. -$! -$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS" -$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -$ THEN -$ TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT /OPTIONS" -$ ELSE -$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN - - TCPIP_LIB = ",SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT /OPTIONS" -$ ENDIF -$! -$! Done with UCX -$! -$ ENDIF -$! -$! Check to see if TCPIP (post UCX) was chosen -$! -$ IF P3.EQS."TCPIP" -$ THEN -$! -$! Set the library to use TCPIP. -$! -$ TCPIP_LIB = ",SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS" -$! -$! Done with TCPIP -$! -$ ENDIF -$! -$! Check to see if NONE was chosen -$! -$ IF P3.EQS."NONE" -$ THEN -$! -$! Do not use TCPIP. -$! -$ TCPIP_LIB = "" -$! -$! Done with TCPIP -$! -$ ENDIF -$! -$! Add TCP/IP type to CC definitions. -$! -$ CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'" -$! -$! Print info -$! -$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB- "," -$! -$! Else The User Entered An Invalid Argument. -$! -$ ELSE -$! -$! Tell The User We Don't Know What They Want. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library." -$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library." -$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$! -$! Done with TCP/IP libraries -$! -$ ENDIF -$! -$! Finish up the definition of CC. -$! -$ IF COMPILER .EQS. "DECC" -$ THEN -$! Not all compiler versions support MAYLOSEDATA3. -$ OPT_TEST = "MAYLOSEDATA3" -$ DEFINE /USER_MODE SYS$ERROR NL: -$ DEFINE /USER_MODE SYS$OUTPUT NL: -$ 'CC' /NOCROSS_REFERENCE /NOLIST /NOOBJECT - - /WARNINGS = DISABLE = ('OPT_TEST', EMPTYFILE) NL: -$ IF ($SEVERITY) -$ THEN -$ IF CCDISABLEWARNINGS .NES. "" THEN - - CCDISABLEWARNINGS = CCDISABLEWARNINGS+ "," -$ CCDISABLEWARNINGS = CCDISABLEWARNINGS+ OPT_TEST -$ ENDIF -$ IF CCDISABLEWARNINGS .NES. "" -$ THEN -$ CCDISABLEWARNINGS = " /WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))" -$ ENDIF -$ ELSE -$ CCDISABLEWARNINGS = "" -$ ENDIF -$ CC2 = CC + " /DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS -$ CC = CC + " /DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS -$! -$! Show user the result -$! -$ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC -$! -$! Special Threads For OpenVMS v7.1 Or Later -$! -$! Written By: Richard Levitte -$! richard@levitte.org -$! -$! -$! Check To See If We Have A Option For P4. -$! -$ IF (P4.EQS."") -$ THEN -$! -$! Get The Version Of VMS We Are Using. -$! -$ ISSEVEN := -$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION"))) -$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP)) -$! -$! Check To See If The VMS Version Is v7.1 Or Later. -$! -$ IF (TMP.GE.71) -$ THEN -$! -$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads. -$! -$ ISSEVEN := ,PTHREAD_USE_D4 -$! -$! End The VMS Version Check. -$! -$ ENDIF -$! -$! End The P4 Check. -$! -$ ENDIF -$! -$! Check if the user wanted to compile just a subset of all the programs. -$! -$ IF P5 .NES. "" -$ THEN -$ PROGRAMS = P5 -$ ENDIF -$! -$! Time To RETURN... -$! -$ RETURN -$! -$ INITIALISE: -$! -$! Save old value of the logical name OPENSSL -$! -$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE") -$! -$! Save directory information -$! -$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;" -$ __HERE = F$EDIT(__HERE,"UPCASE") -$ __TOP = __HERE - "APPS]" -$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]" -$! -$! Set up the logical name OPENSSL to point at the include directory -$! -$ DEFINE OPENSSL /NOLOG '__INCLUDE' -$! -$! Done -$! -$ RETURN -$! -$ CLEANUP: -$! -$! Restore the saved logical name OPENSSL, if it had a value. -$! -$ if (f$type( __SAVE_OPENSSL) .nes. "") -$ then -$ IF __SAVE_OPENSSL .EQS. "" -$ THEN -$ DEASSIGN OPENSSL -$ ELSE -$ DEFINE /NOLOG OPENSSL '__SAVE_OPENSSL' -$ ENDIF -$ endif -$! -$! Close any open files. -$! -$ if (f$trnlnm( "objects", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then - - close objects -$! -$! Done -$! -$ RETURN -$! |