diff options
Diffstat (limited to 'openssl/config')
-rwxr-xr-x | openssl/config | 987 |
1 files changed, 0 insertions, 987 deletions
diff --git a/openssl/config b/openssl/config deleted file mode 100755 index bba370c..0000000 --- a/openssl/config +++ /dev/null @@ -1,987 +0,0 @@ -#!/bin/sh -# -# OpenSSL config: determine the operating system and run ./Configure -# -# "config -h" for usage information. -# -# this is a merge of minarch and GuessOS from the Apache Group. -# Originally written by Tim Hudson <tjh@cryptsoft.com>. - -# Original Apache Group comments on GuessOS - -# Simple OS/Platform guesser. Similar to config.guess but -# much, much smaller. Since it was developed for use with -# Apache, it follows under Apache's regular licensing -# with one specific addition: Any changes or additions -# to this script should be Emailed to the Apache -# group (apache@apache.org) in general and to -# Jim Jagielski (jim@jaguNET.com) in specific. -# -# Be as similar to the output of config.guess/config.sub -# as possible. - -PREFIX="" -SUFFIX="" -TEST="false" -EXE="" - -# pick up any command line args to config -for i -do -case "$i" in --d*) PREFIX="debug-";; --t*) TEST="true";; --h*) TEST="true"; cat <<EOF -Usage: config [options] - -d Add a debug- prefix to machine choice. - -t Test mode, do not run the Configure perl script. - -h This help. - -Any other text will be passed to the Configure perl script. -See INSTALL for instructions. - -EOF -;; -*) options=$options" $i" ;; -esac -done - -# First get uname entries that we use below - -[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown" -[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown" -[ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown" -[ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown" - - -# Now test for ISC and SCO, since it is has a braindamaged uname. -# -# We need to work around FreeBSD 1.1.5.1 -( -XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'` -if [ "x$XREL" != "x" ]; then - if [ -f /etc/kconfig ]; then - case "$XREL" in - 4.0|4.1) - echo "${MACHINE}-whatever-isc4"; exit 0 - ;; - esac - else - case "$XREL" in - 3.2v4.2) - echo "whatever-whatever-sco3"; exit 0 - ;; - 3.2v5.0*) - echo "whatever-whatever-sco5"; exit 0 - ;; - 4.2MP) - case "x${VERSION}" in - x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;; - x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;; - x2*) echo "whatever-whatever-unixware2"; exit 0 ;; - esac - ;; - 4.2) - echo "whatever-whatever-unixware1"; exit 0 - ;; - 5*) - case "x${VERSION}" in - # We hardcode i586 in place of ${MACHINE} for the - # following reason. The catch is that even though Pentium - # is minimum requirement for platforms in question, - # ${MACHINE} gets always assigned to i386. Now, problem - # with i386 is that it makes ./config pass 386 to - # ./Configure, which in turn makes make generate - # inefficient SHA-1 (for this moment) code. - x[678]*) echo "i586-sco-unixware7"; exit 0 ;; - esac - ;; - esac - fi -fi -# Now we simply scan though... In most cases, the SYSTEM info is enough -# -case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in - MPE/iX:*) - MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'` - echo "parisc-hp-MPE/iX"; exit 0 - ;; - A/UX:*) - echo "m68k-apple-aux3"; exit 0 - ;; - - AIX:[3-9]:4:*) - echo "${MACHINE}-ibm-aix"; exit 0 - ;; - - AIX:*:[5-9]:*) - echo "${MACHINE}-ibm-aix"; exit 0 - ;; - - AIX:*) - echo "${MACHINE}-ibm-aix3"; exit 0 - ;; - - BeOS:*:BePC) - if [ -e /boot/develop/headers/be/bone ]; then - echo "beos-x86-bone"; exit 0 - else - echo "beos-x86-r5"; exit 0 - fi - ;; - - dgux:*) - echo "${MACHINE}-dg-dgux"; exit 0 - ;; - - HI-UX:*) - echo "${MACHINE}-hi-hiux"; exit 0 - ;; - - HP-UX:*) - HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "$HPUXVER" in - 1[0-9].*) # HPUX 10 and 11 targets are unified - echo "${MACHINE}-hp-hpux1x"; exit 0 - ;; - *) - echo "${MACHINE}-hp-hpux"; exit 0 - ;; - esac - ;; - - IRIX:5.*) - echo "mips2-sgi-irix"; exit 0 - ;; - - IRIX:6.*) - echo "mips3-sgi-irix"; exit 0 - ;; - - IRIX64:*) - echo "mips4-sgi-irix64"; exit 0 - ;; - - Linux:[2-9].*) - echo "${MACHINE}-whatever-linux2"; exit 0 - ;; - - Linux:1.*) - echo "${MACHINE}-whatever-linux1"; exit 0 - ;; - - GNU*) - echo "hurd-x86"; exit 0; - ;; - - LynxOS:*) - echo "${MACHINE}-lynx-lynxos"; exit 0 - ;; - - BSD/OS:4.*) # BSD/OS always says 386 - echo "i486-whatever-bsdi4"; exit 0 - ;; - - BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*) - case `/sbin/sysctl -n hw.model` in - Pentium*) - echo "i586-whatever-bsdi"; exit 0 - ;; - *) - echo "i386-whatever-bsdi"; exit 0 - ;; - esac; - ;; - - BSD/386:*|BSD/OS:*) - echo "${MACHINE}-whatever-bsdi"; exit 0 - ;; - - FreeBSD:*:*:*386*) - VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'` - MACH=`sysctl -n hw.model` - ARCH='whatever' - case ${MACH} in - *386* ) MACH="i386" ;; - *486* ) MACH="i486" ;; - Pentium\ II*) MACH="i686" ;; - Pentium* ) MACH="i586" ;; - * ) MACH="$MACHINE" ;; - esac - case ${MACH} in - i[0-9]86 ) ARCH="pc" ;; - esac - echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0 - ;; - - FreeBSD:*) - echo "${MACHINE}-whatever-freebsd"; exit 0 - ;; - - NetBSD:*:*:*386*) - echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0 - ;; - - NetBSD:*) - echo "${MACHINE}-whatever-netbsd"; exit 0 - ;; - - OpenBSD:*) - echo "${MACHINE}-whatever-openbsd"; exit 0 - ;; - - OpenUNIX:*) - echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 - ;; - - OSF1:*:*:*alpha*) - OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'` - case "$OSFMAJOR" in - 4|5) - echo "${MACHINE}-dec-tru64"; exit 0 - ;; - 1|2|3) - echo "${MACHINE}-dec-osf"; exit 0 - ;; - *) - echo "${MACHINE}-dec-osf"; exit 0 - ;; - esac - ;; - - QNX:*) - case "$RELEASE" in - 4*) - echo "${MACHINE}-whatever-qnx4" - ;; - 6*) - echo "${MACHINE}-whatever-qnx6" - ;; - *) - echo "${MACHINE}-whatever-qnx" - ;; - esac - exit 0 - ;; - - Paragon*:*:*:*) - echo "i860-intel-osf1"; exit 0 - ;; - - Rhapsody:*) - echo "ppc-apple-rhapsody"; exit 0 - ;; - - Darwin:*) - case "$MACHINE" in - Power*) - echo "ppc-apple-darwin${VERSION}" - ;; - *) - echo "i686-apple-darwin${VERSION}" - ;; - esac - exit 0 - ;; - - SunOS:5.*) - echo "${MACHINE}-whatever-solaris2"; exit 0 - ;; - - SunOS:*) - echo "${MACHINE}-sun-sunos4"; exit 0 - ;; - - UNIX_System_V:4.*:*) - echo "${MACHINE}-whatever-sysv4"; exit 0 - ;; - - VOS:*:*:i786) - echo "i386-stratus-vos"; exit 0 - ;; - - VOS:*:*:*) - echo "hppa1.1-stratus-vos"; exit 0 - ;; - - *:4*:R4*:m88k) - echo "${MACHINE}-whatever-sysv4"; exit 0 - ;; - - DYNIX/ptx:4*:*) - echo "${MACHINE}-whatever-sysv4"; exit 0 - ;; - - *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*) - echo "i486-ncr-sysv4"; exit 0 - ;; - - ULTRIX:*) - echo "${MACHINE}-unknown-ultrix"; exit 0 - ;; - - SINIX*|ReliantUNIX*) - echo "${MACHINE}-siemens-sysv4"; exit 0 - ;; - - POSIX-BC*) - echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000" - ;; - - machten:*) - echo "${MACHINE}-tenon-${SYSTEM}"; exit 0; - ;; - - library:*) - echo "${MACHINE}-ncr-sysv4"; exit 0 - ;; - - ConvexOS:*:11.0:*) - echo "${MACHINE}-v11-${SYSTEM}"; exit 0; - ;; - - NEWS-OS:4.*) - echo "mips-sony-newsos4"; exit 0; - ;; - - MINGW*) - echo "${MACHINE}-whatever-mingw"; exit 0; - ;; - CYGWIN*) - case "$RELEASE" in - [bB]*|1.0|1.[12].*) - echo "${MACHINE}-whatever-cygwin_pre1.3" - ;; - *) - echo "${MACHINE}-whatever-cygwin" - ;; - esac - exit 0 - ;; - - *"CRAY T3E") - echo "t3e-cray-unicosmk"; exit 0; - ;; - - *CRAY*) - echo "j90-cray-unicos"; exit 0; - ;; - - NONSTOP_KERNEL*) - echo "nsr-tandem-nsk"; exit 0; - ;; - - vxworks*) - echo "${MACHINE}-whatever-vxworks"; exit 0; - ;; -esac - -# -# Ugg. These are all we can determine by what we know about -# the output of uname. Be more creative: -# - -# Do the Apollo stuff first. Here, we just simply assume -# that the existance of the /usr/apollo directory is proof -# enough -if [ -d /usr/apollo ]; then - echo "whatever-apollo-whatever" - exit 0 -fi - -# Now NeXT -ISNEXT=`hostinfo 2>/dev/null` -case "$ISNEXT" in - *'NeXT Mach 3.3'*) - echo "whatever-next-nextstep3.3"; exit 0 - ;; - *NeXT*) - echo "whatever-next-nextstep"; exit 0 - ;; -esac - -# At this point we gone through all the one's -# we know of: Punt - -echo "${MACHINE}-whatever-${SYSTEM}" -exit 0 -) 2>/dev/null | ( - -# --------------------------------------------------------------------------- -# this is where the translation occurs into SSLeay terms -# --------------------------------------------------------------------------- - -# Only set CC if not supplied already -if [ -z "$CROSS_COMPILE$CC" ]; then - GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null` - if [ "$GCCVER" != "" ]; then - # then strip off whatever prefix egcs prepends the number with... - # Hopefully, this will work for any future prefixes as well. - GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'` - # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion - # does give us what we want though, so we use that. We just just the - # major and minor version numbers. - # peak single digit before and after first dot, e.g. 2.95.1 gives 29 - GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'` - CC=gcc - else - CC=cc - fi -fi -GCCVER=${GCCVER:-0} -if [ "$SYSTEM" = "HP-UX" ];then - # By default gcc is a ILP32 compiler (with long long == 64). - GCC_BITS="32" - if [ $GCCVER -ge 30 ]; then - # PA64 support only came in with gcc 3.0.x. - # We check if the preprocessor symbol __LP64__ is defined... - if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then - : # __LP64__ has slipped through, it therefore is not defined - else - GCC_BITS="64" - fi - fi -fi -if [ "$SYSTEM" = "SunOS" ]; then - if [ $GCCVER -ge 30 ]; then - # 64-bit ABI isn't officially supported in gcc 3.0, but it appears - # to be working, at the very least 'make test' passes... - if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then - GCC_ARCH="-m64" - else - GCC_ARCH="-m32" - fi - fi - # check for WorkShop C, expected output is "cc: blah-blah C x.x" - CCVER=`(cc -V 2>&1) 2>/dev/null | \ - egrep -e '^cc: .* C [0-9]\.[0-9]' | \ - sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'` - CCVER=${CCVER:-0} - if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then - CC=cc # overrides gcc!!! - if [ $CCVER -eq 50 ]; then - echo "WARNING! Detected WorkShop C 5.0. Do make sure you have" - echo " patch #107357-01 or later applied." - sleep 5 - fi - fi -fi - -if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then - # check for Compaq C, expected output is "blah-blah C Vx.x" - CCCVER=`(ccc -V 2>&1) 2>/dev/null | \ - egrep -e '.* C V[0-9]\.[0-9]' | \ - sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'` - CCCVER=${CCCVER:-0} - if [ $CCCVER -gt 60 ]; then - CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably - # only on hash routines and des, otherwise gcc (2.95) - # keeps along rather tight... - fi -fi - -if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc - (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc -fi - -CCVER=${CCVER:-0} - -# read the output of the embedded GuessOS -read GUESSOS - -echo Operating system: $GUESSOS - -# now map the output into SSLeay terms ... really should hack into the -# script above so we end up with values in vars but that would take -# more time that I want to waste at the moment -case "$GUESSOS" in - uClinux*64*) - OUT=uClinux-dist64 - ;; - uClinux*) - OUT=uClinux-dist - ;; - mips2-sgi-irix) - CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` - CPU=${CPU:-0} - if [ $CPU -ge 4000 ]; then - options="$options -mips2" - fi - OUT="irix-$CC" - ;; - mips3-sgi-irix) - #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` - #CPU=${CPU:-0} - #if [ $CPU -ge 5000 ]; then - # options="$options -mips4" - #else - # options="$options -mips3" - #fi - OUT="irix-mips3-$CC" - ;; - mips4-sgi-irix64) - echo "WARNING! If you wish to build 64-bit library, then you have to" - echo " invoke './Configure irix64-mips4-$CC' *manually*." - if [ "$TEST" = "false" -a -t 1 ]; then - echo " You have about 5 seconds to press Ctrl-C to abort." - (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 - fi - #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` - #CPU=${CPU:-0} - #if [ $CPU -ge 5000 ]; then - # options="$options -mips4" - #else - # options="$options -mips3" - #fi - OUT="irix-mips3-$CC" - ;; - ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;; - ppc-apple-darwin*) - ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null` - if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then - echo "WARNING! If you wish to build 64-bit library, then you have to" - echo " invoke './Configure darwin64-ppc-cc' *manually*." - if [ "$TEST" = "false" -a -t 1 ]; then - echo " You have about 5 seconds to press Ctrl-C to abort." - (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 - fi - fi - if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then - OUT="darwin64-ppc-cc" - else - OUT="darwin-ppc-cc" - fi ;; - i?86-apple-darwin*) - ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null` - if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then - echo "WARNING! If you wish to build 64-bit library, then you have to" - echo " invoke './Configure darwin64-x86_64-cc' *manually*." - if [ "$TEST" = "false" -a -t 1 ]; then - echo " You have about 5 seconds to press Ctrl-C to abort." - (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 - fi - fi - if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then - OUT="darwin64-x86_64-cc" - else - OUT="darwin-i386-cc" - fi ;; - armv6+7-*-iphoneos) - options="$options -arch%20armv6 -arch%20armv7" - OUT="iphoneos-cross" ;; - *-*-iphoneos) - options="$options -arch%20${MACHINE}" - OUT="iphoneos-cross" ;; - alpha-*-linux2) - ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo` - case ${ISA:-generic} in - *[678]) OUT="linux-alpha+bwx-$CC" ;; - *) OUT="linux-alpha-$CC" ;; - esac - if [ "$CC" = "gcc" ]; then - case ${ISA:-generic} in - EV5|EV45) options="$options -mcpu=ev5";; - EV56|PCA56) options="$options -mcpu=ev56";; - *) options="$options -mcpu=ev6";; - esac - fi - ;; - ppc64-*-linux2) - if [ -z "$KERNEL_BITS" ]; then - echo "WARNING! If you wish to build 64-bit library, then you have to" - echo " invoke './Configure linux-ppc64' *manually*." - if [ "$TEST" = "false" -a -t 1 ]; then - echo " You have about 5 seconds to press Ctrl-C to abort." - (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 - fi - fi - if [ "$KERNEL_BITS" = "64" ]; then - OUT="linux-ppc64" - else - OUT="linux-ppc" - (echo "__LP64__" | gcc -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null) || options="$options -m32" - fi - ;; - ppc64le-*-linux2) OUT="linux-ppc64le" ;; - ppc-*-linux2) OUT="linux-ppc" ;; - mips64*-*-linux2) - echo "WARNING! If you wish to build 64-bit library, then you have to" - echo " invoke './Configure linux64-mips64' *manually*." - if [ "$TEST" = "false" -a -t 1 ]; then - echo " You have about 5 seconds to press Ctrl-C to abort." - (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 - fi - OUT="linux-mips64" - ;; - mips*-*-linux2) OUT="linux-mips32" ;; - ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;; - ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;; - pentium-*-vxworks*) OUT="vxworks-pentium" ;; - simlinux-*-vxworks*) OUT="vxworks-simlinux" ;; - mips-*-vxworks*) OUT="vxworks-mips";; - ia64-*-linux?) OUT="linux-ia64" ;; - sparc64-*-linux2) - echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI" - echo " and wish to build 64-bit library, then you have to" - echo " invoke './Configure linux64-sparcv9' *manually*." - if [ "$TEST" = "false" -a -t 1 ]; then - echo " You have about 5 seconds to press Ctrl-C to abort." - (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 - fi - OUT="linux-sparcv9" ;; - sparc-*-linux2) - KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo` - case ${KARCH:-sun4} in - sun4u*) OUT="linux-sparcv9" ;; - sun4m) OUT="linux-sparcv8" ;; - sun4d) OUT="linux-sparcv8" ;; - *) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; - esac ;; - parisc*-*-linux2) - # 64-bit builds under parisc64 linux are not supported and - # compiler is expected to generate 32-bit objects... - CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo` - CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo` - - # ??TODO ?? Model transformations - # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off - # assuming no further arch. identification will ever be used by GCC. - # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC. - # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers - # for these chips in the future. - # PA7300LC -> 7100LC (1.1) - # PA8200 -> 8000 (2.0) - # PA8500 -> 8000 (2.0) - # PA8600 -> 8000 (2.0) - - CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'` - # Finish Model transformations - - options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH" - OUT="linux-generic32" ;; - armv[1-3]*-*-linux2) OUT="linux-generic32" ;; - armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;; - arm*-*-linux2) OUT="linux-armv4" ;; - aarch64-*-linux2) OUT="linux-aarch64" ;; - sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; - sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;; - m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; - s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; - s390x-*-linux2) - # To be uncommented when glibc bug is fixed, see Configure... - #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then - # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you" - # echo " have to invoke './Configure linux32-s390x' *manually*." - # if [ "$TEST" = "false" -a -t -1 ]; then - # echo " You have about 5 seconds to press Ctrl-C to abort." - # (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 - # fi - #fi - OUT="linux64-s390x" - ;; - x86_64-*-linux?) OUT="linux-x86_64" ;; - *86-*-linux2) OUT="linux-elf" - if [ "$GCCVER" -gt 28 ]; then - if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then - options="$options -march=pentium" - fi - if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then - options="$options -march=pentiumpro" - fi - if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then - options="$options -march=k6" - fi - fi ;; - *-*-linux1) OUT="linux-aout" ;; - *-*-linux2) OUT="linux-generic32" ;; - sun4[uv]*-*-solaris2) - OUT="solaris-sparcv9-$CC" - ISA64=`(isalist) 2>/dev/null | grep sparcv9` - if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then - if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then - echo "WARNING! If you wish to build 64-bit library, then you have to" - echo " invoke './Configure solaris64-sparcv9-cc' *manually*." - if [ "$TEST" = "false" -a -t 1 ]; then - echo " You have about 5 seconds to press Ctrl-C to abort." - (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 - fi - elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then - # $GCC_ARCH denotes default ABI chosen by compiler driver - # (first one found on the $PATH). I assume that user - # expects certain consistency with the rest of his builds - # and therefore switch over to 64-bit. <appro> - OUT="solaris64-sparcv9-gcc" - echo "WARNING! If you wish to build 32-bit library, then you have to" - echo " invoke './Configure solaris-sparcv9-gcc' *manually*." - if [ "$TEST" = "false" -a -t 1 ]; then - echo " You have about 5 seconds to press Ctrl-C to abort." - (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 - fi - elif [ "$GCC_ARCH" = "-m32" ]; then - echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI" - echo " and wish to build 64-bit library, then you have to" - echo " invoke './Configure solaris64-sparcv9-gcc' *manually*." - if [ "$TEST" = "false" -a -t 1 ]; then - echo " You have about 5 seconds to press Ctrl-C to abort." - (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 - fi - fi - fi - if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then - OUT="solaris64-sparcv9-$CC" - fi - ;; - sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;; - sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;; - sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;; - *86*-*-solaris2) - ISA64=`(isalist) 2>/dev/null | grep amd64` - if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then - OUT="solaris64-x86_64-$CC" - else - OUT="solaris-x86-$CC" - if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then - options="$options no-sse2" - fi - fi - ;; - *-*-sunos4) OUT="sunos-$CC" ;; - - *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;; - alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;; - powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;; - sparc64-*-*bsd*) OUT="BSD-sparc64" ;; - ia64-*-*bsd*) OUT="BSD-ia64" ;; - amd64-*-*bsd*) OUT="BSD-x86_64" ;; - *86*-*-*bsd*) # mimic ld behaviour when it's looking for libc... - if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD - libc=/usr/lib/libc.so - else # OpenBSD - # ld searches for highest libc.so.* and so do we - libc=`(ls /usr/lib/libc.so.* /lib/libc.so.* | tail -1) 2>/dev/null` - fi - case "`(file -L $libc) 2>/dev/null`" in - *ELF*) OUT="BSD-x86-elf" ;; - *) OUT="BSD-x86"; options="$options no-sse2" ;; - esac ;; - *-*-*bsd*) OUT="BSD-generic32" ;; - - *-*-osf) OUT="osf1-alpha-cc" ;; - *-*-tru64) OUT="tru64-alpha-cc" ;; - *-*-[Uu]nix[Ww]are7) - if [ "$CC" = "gcc" ]; then - OUT="unixware-7-gcc" ; options="$options no-sse2" - else - OUT="unixware-7" ; options="$options no-sse2 -D__i386__" - fi - ;; - *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;; - *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;; - *-*-vos) - options="$options no-threads no-shared no-asm no-dso" - EXE=".pm" - OUT="vos-$CC" ;; - BS2000-siemens-sysv4) OUT="BS2000-OSD" ;; - RM*-siemens-sysv4) OUT="ReliantUNIX" ;; - *-siemens-sysv4) OUT="SINIX" ;; - *-hpux1*) - if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then - OUT="hpux64-parisc2-gcc" - fi - [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null` - KERNEL_BITS=${KERNEL_BITS:-32} - CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null` - CPU_VERSION=${CPU_VERSION:-0} - # See <sys/unistd.h> for further info on CPU_VERSION. - if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU - if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then - OUT="hpux64-ia64-cc" - else - OUT="hpux-ia64-cc" - fi - elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU - OUT=${OUT:-"hpux-parisc2-${CC}"} - if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then - echo "WARNING! If you wish to build 64-bit library then you have to" - echo " invoke './Configure hpux64-parisc2-cc' *manually*." - if [ "$TEST" = "false" -a -t 1 ]; then - echo " You have about 5 seconds to press Ctrl-C to abort." - (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 - fi - fi - elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU - OUT="hpux-parisc-${CC}" - elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU - OUT="hpux-parisc-${CC}" - else # Motorola(?) CPU - OUT="hpux-$CC" - fi - options="$options -D_REENTRANT" ;; - *-hpux) OUT="hpux-parisc-$CC" ;; - *-aix) - [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null` - KERNEL_BITS=${KERNEL_BITS:-32} - OBJECT_MODE=${OBJECT_MODE:-32} - if [ "$CC" = "gcc" ]; then - OUT="aix-gcc" - if [ $OBJECT_MODE -eq 64 ]; then - echo 'Your $OBJECT_MODE was found to be set to 64' - OUT="aix64-gcc" - fi - elif [ $OBJECT_MODE -eq 64 ]; then - echo 'Your $OBJECT_MODE was found to be set to 64' - OUT="aix64-cc" - else - OUT="aix-cc" - if [ $KERNEL_BITS -eq 64 ]; then - echo "WARNING! If you wish to build 64-bit kit, then you have to" - echo " invoke './Configure aix64-cc' *manually*." - if [ "$TEST" = "false" -a -t 1 ]; then - echo " You have ~5 seconds to press Ctrl-C to abort." - (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 - fi - fi - fi - if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then - : # this applies even to Power3 and later, as they return PowerPC_POWER[345] - else - options="$options no-asm" - fi - ;; - # these are all covered by the catchall below - # *-dgux) OUT="dgux" ;; - mips-sony-newsos4) OUT="newsos4-gcc" ;; - *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;; - i[3456]86-*-cygwin) OUT="Cygwin" ;; - *-*-cygwin) OUT="Cygwin-${MACHINE}" ;; - t3e-cray-unicosmk) OUT="cray-t3e" ;; - j90-cray-unicos) OUT="cray-j90" ;; - nsr-tandem-nsk) OUT="tandem-c89" ;; - beos-*) OUT="$GUESSOS" ;; - x86pc-*-qnx6) OUT="QNX6-i386" ;; - *-*-qnx6) OUT="QNX6" ;; - x86-*-android|i?86-*-android) OUT="android-x86" ;; - armv[7-9]*-*-android) OUT="android-armv7" ;; - *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; -esac - -# NB: This atalla support has been superceded by the ENGINE support -# That contains its own header and definitions anyway. Support can -# be enabled or disabled on any supported platform without external -# headers, eg. by adding the "hw-atalla" switch to ./config or -# perl Configure -# -# See whether we can compile Atalla support -#if [ -f /usr/include/atasi.h ] -#then -# options="$options -DATALLA" -#fi - -if expr "$options" : '.*no\-asm' > /dev/null; then :; else - sh -c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \ - grep \\--noexecstack >/dev/null && \ - options="$options -Wa,--noexecstack" -fi - -# gcc < 2.8 does not support -march=ultrasparc -if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ] -then - echo "WARNING! Falling down to 'solaris-sparcv8-gcc'." - echo " Upgrade to gcc-2.8 or later." - sleep 5 - OUT=solaris-sparcv8-gcc -fi -if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ] -then - echo "WARNING! Falling down to 'linux-sparcv8'." - echo " Upgrade to gcc-2.8 or later." - sleep 5 - OUT=linux-sparcv8 -fi - -case "$GUESSOS" in - i386-*) options="$options 386" ;; -esac - -for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha -do - if [ ! -d crypto/$i ] - then - options="$options no-$i" - fi -done - -# Discover Kerberos 5 (since it's still a prototype, we don't -# do any guesses yet, that's why this section is commented away. -#if [ -d /usr/kerberos ]; then -# krb5_dir=/usr/kerberos -# if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\ -# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ -# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ -# -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\ -# -a \( -f $krb5_dir/include/krb5.h \) ]; then -# options="$options --with-krb5-flavor=MIT" -# fi -#elif [ -d /usr/heimdal ]; then -# krb5_dir=/usr/heimdal -# if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\ -# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ -# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ -# -a \( -f $krb5_dir/include/krb5.h \) ]; then -# options="$options --with-krb5-flavor=Heimdal" -# fi -#fi - -if [ -z "$OUT" ]; then - OUT="$CC" -fi - -if [ ".$PERL" = . ] ; then - for i in . `echo $PATH | sed 's/:/ /g'`; do - if [ -f "$i/perl5$EXE" ] ; then - PERL="$i/perl5$EXE" - break; - fi; - done -fi - -if [ ".$PERL" = . ] ; then - for i in . `echo $PATH | sed 's/:/ /g'`; do - if [ -f "$i/perl$EXE" ] ; then - if "$i/perl$EXE" -e 'exit($]<5.0)'; then - PERL="$i/perl$EXE" - break; - fi; - fi; - done -fi - -if [ ".$PERL" = . ] ; then - echo "You need Perl 5." - exit 1 -fi - -# run Configure to check to see if we need to specify the -# compiler for the platform ... in which case we add it on -# the end ... otherwise we leave it off - -$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null -if [ $? = "0" ]; then - OUT="$OUT-$CC" -fi - -OUT="$PREFIX$OUT" - -$PERL ./Configure LIST | grep "$OUT" > /dev/null -if [ $? = "0" ]; then - echo Configuring for $OUT - - if [ "$TEST" = "true" ]; then - echo $PERL ./Configure $OUT $options - else - $PERL ./Configure $OUT $options - fi -else - echo "This system ($OUT) is not supported. See file INSTALL for details." -fi -) |