diff options
Diffstat (limited to 'tcl8.6/pkgs/tdbcmysql1.0.6/win/rules.vc')
| -rw-r--r-- | tcl8.6/pkgs/tdbcmysql1.0.6/win/rules.vc | 1723 |
1 files changed, 0 insertions, 1723 deletions
diff --git a/tcl8.6/pkgs/tdbcmysql1.0.6/win/rules.vc b/tcl8.6/pkgs/tdbcmysql1.0.6/win/rules.vc deleted file mode 100644 index bbb412d..0000000 --- a/tcl8.6/pkgs/tdbcmysql1.0.6/win/rules.vc +++ /dev/null @@ -1,1723 +0,0 @@ -#------------------------------------------------------------- -*- makefile -*- -# rules.vc -- -# -# Part of the nmake based build system for Tcl and its extensions. -# This file does all the hard work in terms of parsing build options, -# compiler switches, defining common targets and macros. The Tcl makefile -# directly includes this. Extensions include it via "rules-ext.vc". -# -# See TIP 477 (https://core.tcl.tk/tips/doc/trunk/tip/477.md) for -# detailed documentation. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# -# Copyright (c) 2001-2003 David Gravereaux. -# Copyright (c) 2003-2008 Patrick Thoyts -# Copyright (c) 2017 Ashok P. Nadkarni -#------------------------------------------------------------------------------ - -!ifndef _RULES_VC -_RULES_VC = 1 - -# The following macros define the version of the rules.vc nmake build system -# For modifications that are not backward-compatible, you *must* change -# the major version. -RULES_VERSION_MAJOR = 1 -RULES_VERSION_MINOR = 0 - -# The PROJECT macro must be defined by parent makefile. -!if "$(PROJECT)" == "" -!error *** Error: Macro PROJECT not defined! Please define it before including rules.vc -!endif - -!if "$(PRJ_PACKAGE_TCLNAME)" == "" -PRJ_PACKAGE_TCLNAME = $(PROJECT) -!endif - -# Also special case Tcl and Tk to save some typing later -DOING_TCL = 0 -DOING_TK = 0 -!if "$(PROJECT)" == "tcl" -DOING_TCL = 1 -!elseif "$(PROJECT)" == "tk" -DOING_TK = 1 -!endif - -!ifndef NEED_TK -# Backwards compatibility -!ifdef PROJECT_REQUIRES_TK -NEED_TK = $(PROJECT_REQUIRES_TK) -!else -NEED_TK = 0 -!endif -!endif - -!ifndef NEED_TCL_SOURCE -NEED_TCL_SOURCE = 0 -!endif - -!ifdef NEED_TK_SOURCE -!if $(NEED_TK_SOURCE) -NEED_TK = 1 -!endif -!else -NEED_TK_SOURCE = 0 -!endif - -################################################################ -# Nmake is a pretty weak environment in syntax and capabilities -# so this file is necessarily verbose. It's broken down into -# the following parts. -# -# 0. Sanity check that compiler environment is set up and initialize -# any built-in settings from the parent makefile -# 1. First define the external tools used for compiling, copying etc. -# as this is independent of everything else. -# 2. Figure out our build structure in terms of the directory, whether -# we are building Tcl or an extension, etc. -# 3. Determine the compiler and linker versions -# 4. Build the nmakehlp helper application -# 5. Determine the supported compiler options and features -# 6. Parse the OPTS macro value for user-specified build configuration -# 7. Parse the STATS macro value for statistics instrumentation -# 8. Parse the CHECKS macro for additional compilation checks -# 9. Extract Tcl, and possibly Tk, version numbers from the headers -# 10. Based on this selected configuration, construct the output -# directory and file paths -# 11. Construct the paths where the package is to be installed -# 12. Set up the actual options passed to compiler and linker based -# on the information gathered above. -# 13. Define some standard build targets and implicit rules. These may -# be optionally disabled by the parent makefile. -# 14. (For extensions only.) Compare the configuration of the target -# Tcl and the extensions and warn against discrepancies. -# -# One final note about the macro names used. They are as they are -# for historical reasons. We would like legacy extensions to -# continue to work with this make include file so be wary of -# changing them for consistency or clarity. - -# 0. Sanity check compiler environment - -# Check to see we are configured to build with MSVC (MSDEVDIR, MSVCDIR or -# VCINSTALLDIR) or with the MS Platform SDK (MSSDK or WindowsSDKDir) - -!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR) -MSG = ^ -Visual C++ compiler environment not initialized. -!error $(MSG) -!endif - -# We need to run from the directory the parent makefile is located in. -# nmake does not tell us what makefile was used to invoke it so parent -# makefile has to set the MAKEFILEVC macro or we just make a guess and -# warn if we think that is not the case. -!if "$(MAKEFILEVC)" == "" - -!if exist("$(PROJECT).vc") -MAKEFILEVC = $(PROJECT).vc -!elseif exist("makefile.vc") -MAKEFILEVC = makefile.vc -!endif -!endif # "$(MAKEFILEVC)" == "" - -!if !exist("$(MAKEFILEVC)") -MSG = ^ -You must run nmake from the directory containing the project makefile.^ -If you are doing that and getting this message, set the MAKEFILEVC^ -macro to the name of the project makefile. -!message WARNING: $(MSG) -!endif - - -################################################################ -# 1. Define external programs being used - -#---------------------------------------------------------- -# Set the proper copy method to avoid overwrite questions -# to the user when copying files and selecting the right -# "delete all" method. -#---------------------------------------------------------- - -RMDIR = rmdir /S /Q -CPY = xcopy /i /y >NUL -CPYDIR = xcopy /e /i /y >NUL -COPY = copy /y >NUL -MKDIR = mkdir - -###################################################################### -# 2. Figure out our build environment in terms of what we're building. -# -# (a) Tcl itself -# (b) Tk -# (c) a Tcl extension using libraries/includes from an *installed* Tcl -# (d) a Tcl extension using libraries/includes from Tcl source directory -# -# This last is needed because some extensions still need -# some Tcl interfaces that are not publicly exposed. -# -# The fragment will set the following macros: -# ROOT - root of this module sources -# COMPATDIR - source directory that holds compatibility sources -# DOCDIR - source directory containing documentation files -# GENERICDIR - platform-independent source directory -# WINDIR - Windows-specific source directory -# TESTDIR - directory containing test files -# TOOLSDIR - directory containing build tools -# _TCLDIR - root of the Tcl installation OR the Tcl sources. Not set -# when building Tcl itself. -# _INSTALLDIR - native form of the installation path. For Tcl -# this will be the root of the Tcl installation. For extensions -# this will be the lib directory under the root. -# TCLINSTALL - set to 1 if _TCLDIR refers to -# headers and libraries from an installed Tcl, and 0 if built against -# Tcl sources. Not set when building Tcl itself. Yes, not very well -# named. -# _TCL_H - native path to the tcl.h file -# -# If Tk is involved, also sets the following -# _TKDIR - native form Tk installation OR Tk source. Not set if building -# Tk itself. -# TKINSTALL - set 1 if _TKDIR refers to installed Tk and 0 if Tk sources -# _TK_H - native path to the tk.h file - -# Root directory for sources and assumed subdirectories -ROOT = $(MAKEDIR)\.. -# The following paths CANNOT have spaces in them as they appear on the -# left side of implicit rules. -!ifndef COMPATDIR -COMPATDIR = $(ROOT)\compat -!endif -!ifndef DOCDIR -DOCDIR = $(ROOT)\doc -!endif -!ifndef GENERICDIR -GENERICDIR = $(ROOT)\generic -!endif -!ifndef TOOLSDIR -TOOLSDIR = $(ROOT)\tools -!endif -!ifndef TESTDIR -TESTDIR = $(ROOT)\tests -!endif -!ifndef LIBDIR -!if exist("$(ROOT)\library") -LIBDIR = $(ROOT)\library -!else -LIBDIR = $(ROOT)\lib -!endif -!endif -!ifndef DEMODIR -!if exist("$(LIBDIR)\demos") -DEMODIR = $(LIBDIR)\demos -!else -DEMODIR = $(ROOT)\demos -!endif -!endif # ifndef DEMODIR -# Do NOT enclose WINDIR in a !ifndef because Windows always defines -# WINDIR env var to point to c:\windows! -# TBD - This is a potentially dangerous conflict, rename WINDIR to -# something else -WINDIR = $(ROOT)\win - -!ifndef RCDIR -!if exist("$(WINDIR)\rc") -RCDIR = $(WINDIR)\rc -!else -RCDIR = $(WINDIR) -!endif -!endif -RCDIR = $(RCDIR:/=\) - -# The target directory where the built packages and binaries will be installed. -# INSTALLDIR is the (optional) path specified by the user. -# _INSTALLDIR is INSTALLDIR using the backslash separator syntax -!ifdef INSTALLDIR -### Fix the path separators. -_INSTALLDIR = $(INSTALLDIR:/=\) -!else -### Assume the normal default. -_INSTALLDIR = $(HOMEDRIVE)\Tcl -!endif - -!if $(DOING_TCL) - -# BEGIN Case 2(a) - Building Tcl itself - -# Only need to define _TCL_H -_TCL_H = ..\generic\tcl.h - -# END Case 2(a) - Building Tcl itself - -!elseif $(DOING_TK) - -# BEGIN Case 2(b) - Building Tk - -TCLINSTALL = 0 # Tk always builds against Tcl source, not an installed Tcl -!if "$(TCLDIR)" == "" -!if [echo TCLDIR = \> nmakehlp.out] \ - || [nmakehlp -L generic\tcl.h >> nmakehlp.out] -!error *** Could not locate Tcl source directory. -!endif -!include nmakehlp.out -!endif # TCLDIR == "" - -_TCLDIR = $(TCLDIR:/=\) -_TCL_H = $(_TCLDIR)\generic\tcl.h -!if !exist("$(_TCL_H)") -!error Could not locate tcl.h. Please set the TCLDIR macro to point to the Tcl *source* directory. -!endif - -_TK_H = ..\generic\tk.h - -# END Case 2(b) - Building Tk - -!else - -# BEGIN Case 2(c) or (d) - Building an extension other than Tk - -# If command line has specified Tcl location through TCLDIR, use it -# else default to the INSTALLDIR setting -!if "$(TCLDIR)" != "" - -_TCLDIR = $(TCLDIR:/=\) -!if exist("$(_TCLDIR)\include\tcl.h") # Case 2(c) with TCLDIR defined -TCLINSTALL = 1 -_TCL_H = $(_TCLDIR)\include\tcl.h -!elseif exist("$(_TCLDIR)\generic\tcl.h") # Case 2(d) with TCLDIR defined -TCLINSTALL = 0 -_TCL_H = $(_TCLDIR)\generic\tcl.h -!endif - -!else # # Case 2(c) for extensions with TCLDIR undefined - -# Need to locate Tcl depending on whether it needs Tcl source or not. -# If we don't, check the INSTALLDIR for an installed Tcl first - -!if exist("$(_INSTALLDIR)\include\tcl.h") && !$(NEED_TCL_SOURCE) - -TCLINSTALL = 1 -TCLDIR = $(_INSTALLDIR)\.. -# NOTE: we will be resetting _INSTALLDIR to _INSTALLDIR/lib for extensions -# later so the \.. accounts for the /lib -_TCLDIR = $(_INSTALLDIR)\.. -_TCL_H = $(_TCLDIR)\include\tcl.h - -!else # exist(...) && ! $(NEED_TCL_SOURCE) - -!if [echo _TCLDIR = \> nmakehlp.out] \ - || [nmakehlp -L generic\tcl.h >> nmakehlp.out] -!error *** Could not locate Tcl source directory. -!endif -!include nmakehlp.out -TCLINSTALL = 0 -TCLDIR = $(_TCLDIR) -_TCL_H = $(_TCLDIR)\generic\tcl.h - -!endif # exist(...) && ! $(NEED_TCL_SOURCE) - -!endif # TCLDIR - -!ifndef _TCL_H -MSG =^ -Failed to find tcl.h. The TCLDIR macro is set incorrectly or is not set and default path does not contain tcl.h. -!error $(MSG) -!endif - -# Now do the same to locate Tk headers and libs if project requires Tk -!if $(NEED_TK) - -!if "$(TKDIR)" != "" - -_TKDIR = $(TKDIR:/=\) -!if exist("$(_TKDIR)\include\tk.h") -TKINSTALL = 1 -_TK_H = $(_TKDIR)\include\tk.h -!elseif exist("$(_TKDIR)\generic\tk.h") -TKINSTALL = 0 -_TK_H = $(_TKDIR)\generic\tk.h -!endif - -!else # TKDIR not defined - -# Need to locate Tcl depending on whether it needs Tcl source or not. -# If we don't, check the INSTALLDIR for an installed Tcl first - -!if exist("$(_INSTALLDIR)\include\tk.h") && !$(NEED_TK_SOURCE) - -TKINSTALL = 1 -# NOTE: we will be resetting _INSTALLDIR to _INSTALLDIR/lib for extensions -# later so the \.. accounts for the /lib -_TKDIR = $(_INSTALLDIR)\.. -_TK_H = $(_TKDIR)\include\tk.h -TKDIR = $(_TKDIR) - -!else # exist("$(_INSTALLDIR)\include\tk.h") && !$(NEED_TK_SOURCE) - -!if [echo _TKDIR = \> nmakehlp.out] \ - || [nmakehlp -L generic\tk.h >> nmakehlp.out] -!error *** Could not locate Tk source directory. -!endif -!include nmakehlp.out -TKINSTALL = 0 -TKDIR = $(_TKDIR) -_TK_H = $(_TKDIR)\generic\tk.h - -!endif # exist("$(_INSTALLDIR)\include\tk.h") && !$(NEED_TK_SOURCE) - -!endif # TKDIR - -!ifndef _TK_H -MSG =^ -Failed to find tk.h. The TKDIR macro is set incorrectly or is not set and default path does not contain tk.h. -!error $(MSG) -!endif - -!endif # NEED_TK - -!if $(NEED_TCL_SOURCE) && $(TCLINSTALL) -MSG = ^ -*** Warning: This extension requires the source distribution of Tcl.^ -*** Please set the TCLDIR macro to point to the Tcl sources. -!error $(MSG) -!endif - -!if $(NEED_TK_SOURCE) -!if $(TKINSTALL) -MSG = ^ -*** Warning: This extension requires the source distribution of Tk.^ -*** Please set the TKDIR macro to point to the Tk sources. -!error $(MSG) -!endif -!endif - - -# If INSTALLDIR set to tcl installation root dir then reset to the -# lib dir for installing extensions -!if exist("$(_INSTALLDIR)\include\tcl.h") -_INSTALLDIR=$(_INSTALLDIR)\lib -!endif - -# END Case 2(c) or (d) - Building an extension -!endif # if $(DOING_TCL) - -################################################################ -# 3. Determine compiler version and architecture -# In this section, we figure out the compiler version and the -# architecture for which we are building. This sets the -# following macros: -# VCVERSION - the internal compiler version as 1200, 1400, 1910 etc. -# This is also printed by the compiler in dotted form 19.10 etc. -# VCVER - the "marketing version", for example Visual C++ 6 for internal -# compiler version 1200. This is kept only for legacy reasons as it -# does not make sense for recent Microsoft compilers. Only used for -# output directory names. -# ARCH - set to IX86 or AMD64 depending on 32- or 64-bit target -# NATIVE_ARCH - set to IX86 or AMD64 for the host machine -# MACHINE - same as $(ARCH) - legacy -# _VC_MANIFEST_EMBED_{DLL,EXE} - commands for embedding a manifest if needed -# CFG_ENCODING - set to an character encoding. -# TBD - this is passed to compiler as TCL_CFGVAL_ENCODING but can't -# see where it is used - -cc32 = $(CC) # built-in default. -link32 = link -lib32 = lib -rc32 = $(RC) # built-in default. - -#---------------------------------------------------------------- -# Figure out the compiler architecture and version by writing -# the C macros to a file, preprocessing them with the C -# preprocessor and reading back the created file - -_HASH=^# -_VC_MANIFEST_EMBED_EXE= -_VC_MANIFEST_EMBED_DLL= -VCVER=0 -!if ![echo VCVERSION=_MSC_VER > vercl.x] \ - && ![echo $(_HASH)if defined(_M_IX86) >> vercl.x] \ - && ![echo ARCH=IX86 >> vercl.x] \ - && ![echo $(_HASH)elif defined(_M_AMD64) >> vercl.x] \ - && ![echo ARCH=AMD64 >> vercl.x] \ - && ![echo $(_HASH)endif >> vercl.x] \ - && ![$(cc32) -nologo -TC -P vercl.x 2>NUL] -!include vercl.i -!if $(VCVERSION) < 1900 -!if ![echo VCVER= ^\> vercl.vc] \ - && ![set /a $(VCVERSION) / 100 - 6 >> vercl.vc] -!include vercl.vc -!endif -!else -# The simple calculation above does not apply to new Visual Studio releases -# Keep the compiler version in its native form. -VCVER = $(VCVERSION) -!endif -!endif - -!if ![del 2>NUL /q/f vercl.x vercl.i vercl.vc] -!endif - -#---------------------------------------------------------------- -# The MACHINE macro is used by legacy makefiles so set it as well -!ifdef MACHINE -!if "$(MACHINE)" == "x86" -!undef MACHINE -MACHINE = IX86 -!elseif "$(MACHINE)" == "x64" -!undef MACHINE -MACHINE = AMD64 -!endif -!if "$(MACHINE)" != "$(ARCH)" -!error Specified MACHINE macro $(MACHINE) does not match detected target architecture $(ARCH). -!endif -!else -MACHINE=$(ARCH) -!endif - -#------------------------------------------------------------ -# Figure out the *host* architecture by reading the registry - -!if ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i x86] -NATIVE_ARCH=IX86 -!else -NATIVE_ARCH=AMD64 -!endif - -# Since MSVC8 we must deal with manifest resources. -!if $(VCVERSION) >= 1400 -_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 -_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 -!endif - -!ifndef CFG_ENCODING -CFG_ENCODING = \"cp1252\" -!endif - -################################################################ -# 4. Build the nmakehlp program -# This is a helper app we need to overcome nmake's limiting -# environment. We will call out to it to get various bits of -# information about supported compiler options etc. -# -# Tcl itself will always use the nmakehlp.c program which is -# in its own source. This is the "master" copy and kept updated. -# -# Extensions built against an installed Tcl will use the installed -# copy of Tcl's nmakehlp.c if there is one and their own version -# otherwise. In the latter case, they would also be using their own -# rules.vc. Note that older versions of Tcl do not install nmakehlp.c -# or rules.vc. -# -# Extensions built against Tcl sources will use the one from the Tcl source. -# -# When building an extension using a sufficiently new version of Tcl, -# rules-ext.vc will define NMAKEHLPC appropriately to point to the -# copy of nmakehlp.c to be used. - -!ifndef NMAKEHLPC -# Default to the one in the current directory (the extension's own nmakehlp.c) -NMAKEHLPC = nmakehlp.c - -!if !$(DOING_TCL) -!if $(TCLINSTALL) -!if exist("$(_TCLDIR)\lib\nmake\nmakehlp.c") -NMAKEHLPC = $(_TCLDIR)\lib\nmake\nmakehlp.c -!endif -!else # ! $(TCLINSTALL) -!if exist("$(_TCLDIR)\win\nmakehlp.c") -NMAKEHLPC = $(_TCLDIR)\win\nmakehlp.c -!endif -!endif # $(TCLINSTALL) -!endif # !$(DOING_TCL) - -!endif # NMAKEHLPC - -# We always build nmakehlp even if it exists since we do not know -# what source it was built from. -!message *** Using $(NMAKEHLPC) -!if [$(cc32) -nologo "$(NMAKEHLPC)" -link -subsystem:console > nul] -!endif - -################################################################ -# 5. Test for compiler features -# Visual C++ compiler options have changed over the years. Check -# which options are supported by the compiler in use. -# -# The following macros are set: -# OPTIMIZATIONS - the compiler flags to be used for optimized builds -# DEBUGFLAGS - the compiler flags to be used for debug builds -# LINKERFLAGS - Flags passed to the linker -# -# Note that these are the compiler settings *available*, not those -# that will be *used*. The latter depends on the OPTS macro settings -# which we have not yet parsed. -# -# Also note that some of the flags in OPTIMIZATIONS are not really -# related to optimization. They are placed there only for legacy reasons -# as some extensions expect them to be included in that macro. - -# -Op improves float consistency. Note only needed for older compilers -# Newer compilers do not need or support this option. -!if [nmakehlp -c -Op] -FPOPTS = -Op -!endif - -# Strict floating point semantics - present in newer compilers in lieu of -Op -!if [nmakehlp -c -fp:strict] -FPOPTS = $(FPOPTS) -fp:strict -!endif - -!if "$(MACHINE)" == "IX86" -### test for pentium errata -!if [nmakehlp -c -QI0f] -!message *** Compiler has 'Pentium 0x0f fix' -FPOPTS = $(FPOPTS) -QI0f -!else -!message *** Compiler does not have 'Pentium 0x0f fix' -!endif -!endif - -### test for optimizations -# /O2 optimization includes /Og /Oi /Ot /Oy /Ob2 /Gs /GF /Gy as per -# documentation. Note we do NOT want /Gs as that inserts a _chkstk -# stack probe at *every* function entry, not just those with more than -# a page of stack allocation resulting in a performance hit. However, -# /O2 documentation is misleading as its stack probes are simply the -# default page size locals allocation probes and not what is implied -# by an explicit /Gs option. - -OPTIMIZATIONS = $(FPOPTS) - -!if [nmakehlp -c -O2] -!message *** Compiler has 'Optimizations' -OPTIMIZING = 1 -OPTIMIZATIONS = $(OPTIMIZATIONS) -O2 -!else -# Legacy, really. All modern compilers support this -!message *** Compiler does not have 'Optimizations' -OPTIMIZING = 0 -!endif - -# Checks for buffer overflows in local arrays -!if [nmakehlp -c -GS] -OPTIMIZATIONS = $(OPTIMIZATIONS) -GS -!endif - -# Link time optimization. Note that this option (potentially) makes -# generated libraries only usable by the specific VC++ version that -# created it. Requires /LTCG linker option -!if [nmakehlp -c -GL] -OPTIMIZATIONS = $(OPTIMIZATIONS) -GL -CC_GL_OPT_ENABLED = 1 -!else -# In newer compilers -GL and -YX are incompatible. -!if [nmakehlp -c -YX] -OPTIMIZATIONS = $(OPTIMIZATIONS) -YX -!endif -!endif # [nmakehlp -c -GL] - -DEBUGFLAGS = $(FPOPTS) - -# Run time error checks. Not available or valid in a release, non-debug build -# RTC is for modern compilers, -GZ is legacy -!if [nmakehlp -c -RTC1] -DEBUGFLAGS = $(DEBUGFLAGS) -RTC1 -!elseif [nmakehlp -c -GZ] -DEBUGFLAGS = $(DEBUGFLAGS) -GZ -!endif - -#---------------------------------------------------------------- -# Linker flags - -# LINKER_TESTFLAGS are for internal use when we call nmakehlp to test -# if the linker supports a specific option. Without these flags link will -# return "LNK1561: entry point must be defined" error compiling from VS-IDE: -# They are not passed through to the actual application / extension -# link rules. -!ifndef LINKER_TESTFLAGS -LINKER_TESTFLAGS = /DLL /NOENTRY /OUT:nmakehlp.out -!endif - -LINKERFLAGS = - -# If compiler has enabled link time optimization, linker must too with -ltcg -!ifdef CC_GL_OPT_ENABLED -!if [nmakehlp -l -ltcg $(LINKER_TESTFLAGS)] -LINKERFLAGS = $(LINKERFLAGS) -ltcg -!endif -!endif - -######################################################################## -# 6. Parse the OPTS macro to work out the requested build configuration. -# Based on this, we will construct the actual switches to be passed to the -# compiler and linker using the macros defined in the previous section. -# The following macros are defined by this section based on OPTS -# STATIC_BUILD - 0 -> Tcl is to be built as a shared library -# 1 -> build as a static library and shell -# TCL_THREADS - legacy but always 1 on Windows since winsock requires it. -# DEBUG - 1 -> debug build, 0 -> release builds -# SYMBOLS - 1 -> generate PDB's, 0 -> no PDB's -# PROFILE - 1 -> generate profiling info, 0 -> no profiling -# PGO - 1 -> profile based optimization, 0 -> no -# MSVCRT - 1 -> link to dynamic C runtime even when building static Tcl build -# 0 -> link to static C runtime for static Tcl build. -# Does not impact shared Tcl builds (STATIC_BUILD == 0) -# TCL_USE_STATIC_PACKAGES - 1 -> statically link the registry and dde extensions -# in the Tcl shell. 0 -> keep them as shared libraries -# Does not impact shared Tcl builds. -# USE_THREAD_ALLOC - 1 -> Use a shared global free pool for allocation. -# 0 -> Use the non-thread allocator. -# UNCHECKED - 1 -> when doing a debug build with symbols, use the release -# C runtime, 0 -> use the debug C runtime. -# USE_STUBS - 1 -> compile to use stubs interfaces, 0 -> direct linking -# CONFIG_CHECK - 1 -> check current build configuration against Tcl -# configuration (ignored for Tcl itself) -# Further, LINKERFLAGS are modified based on above. - -# Default values for all the above -STATIC_BUILD = 0 -TCL_THREADS = 1 -DEBUG = 0 -SYMBOLS = 0 -PROFILE = 0 -PGO = 0 -MSVCRT = 1 -TCL_USE_STATIC_PACKAGES = 0 -USE_THREAD_ALLOC = 1 -UNCHECKED = 0 -CONFIG_CHECK = 1 -!if $(DOING_TCL) -USE_STUBS = 0 -!else -USE_STUBS = 1 -!endif - -# If OPTS is not empty AND does not contain "none" which turns off all OPTS -# set the above macros based on OPTS content -!if "$(OPTS)" != "" && ![nmakehlp -f "$(OPTS)" "none"] - -# OPTS are specified, parse them - -!if [nmakehlp -f $(OPTS) "static"] -!message *** Doing static -STATIC_BUILD = 1 -!endif - -!if [nmakehlp -f $(OPTS) "nostubs"] -!message *** Not using stubs -USE_STUBS = 0 -!endif - -!if [nmakehlp -f $(OPTS) "nomsvcrt"] -!message *** Doing nomsvcrt -MSVCRT = 0 -!else -!if [nmakehlp -f $(OPTS) "msvcrt"] -!message *** Doing msvcrt -MSVCRT = 1 -!else -!if !$(STATIC_BUILD) -MSVCRT = 1 -!else -MSVCRT = 0 -!endif -!endif -!endif # [nmakehlp -f $(OPTS) "nomsvcrt"] - -!if [nmakehlp -f $(OPTS) "staticpkg"] && $(STATIC_BUILD) -!message *** Doing staticpkg -TCL_USE_STATIC_PACKAGES = 1 -!else -TCL_USE_STATIC_PACKAGES = 0 -!endif - -!if [nmakehlp -f $(OPTS) "nothreads"] -!message *** Compile explicitly for non-threaded tcl -TCL_THREADS = 0 -USE_THREAD_ALLOC= 0 -!else -TCL_THREADS = 1 -USE_THREAD_ALLOC= 1 -!endif - -!if [nmakehlp -f $(OPTS) "symbols"] -!message *** Doing symbols -DEBUG = 1 -!else -DEBUG = 0 -!endif - -!if [nmakehlp -f $(OPTS) "pdbs"] -!message *** Doing pdbs -SYMBOLS = 1 -!else -SYMBOLS = 0 -!endif - -!if [nmakehlp -f $(OPTS) "profile"] -!message *** Doing profile -PROFILE = 1 -!else -PROFILE = 0 -!endif - -!if [nmakehlp -f $(OPTS) "pgi"] -!message *** Doing profile guided optimization instrumentation -PGO = 1 -!elseif [nmakehlp -f $(OPTS) "pgo"] -!message *** Doing profile guided optimization -PGO = 2 -!else -PGO = 0 -!endif - -!if [nmakehlp -f $(OPTS) "loimpact"] -!message *** Warning: ignoring option "loimpact" - deprecated on modern Windows. -!endif - -# TBD - should get rid of this option -!if [nmakehlp -f $(OPTS) "thrdalloc"] -!message *** Doing thrdalloc -USE_THREAD_ALLOC = 1 -!endif - -!if [nmakehlp -f $(OPTS) "tclalloc"] -USE_THREAD_ALLOC = 0 -!endif - -!if [nmakehlp -f $(OPTS) "unchecked"] -!message *** Doing unchecked -UNCHECKED = 1 -!else -UNCHECKED = 0 -!endif - -!if [nmakehlp -f $(OPTS) "noconfigcheck"] -CONFIG_CHECK = 1 -!else -CONFIG_CHECK = 0 -!endif - -!endif # "$(OPTS)" != "" && ... parsing of OPTS - -# Set linker flags based on above - -!if $(PGO) > 1 -!if [nmakehlp -l -ltcg:pgoptimize $(LINKER_TESTFLAGS)] -LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pgoptimize -!else -MSG=^ -This compiler does not support profile guided optimization. -!error $(MSG) -!endif -!elseif $(PGO) > 0 -!if [nmakehlp -l -ltcg:pginstrument $(LINKER_TESTFLAGS)] -LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pginstrument -!else -MSG=^ -This compiler does not support profile guided optimization. -!error $(MSG) -!endif -!endif - -################################################################ -# 7. Parse the STATS macro to configure code instrumentation -# The following macros are set by this section: -# TCL_MEM_DEBUG - 1 -> enables memory allocation instrumentation -# 0 -> disables -# TCL_COMPILE_DEBUG - 1 -> enables byte compiler logging -# 0 -> disables - -# Default both are off -TCL_MEM_DEBUG = 0 -TCL_COMPILE_DEBUG = 0 - -!if "$(STATS)" != "" && ![nmakehlp -f "$(STATS)" "none"] - -!if [nmakehlp -f $(STATS) "memdbg"] -!message *** Doing memdbg -TCL_MEM_DEBUG = 1 -!else -TCL_MEM_DEBUG = 0 -!endif - -!if [nmakehlp -f $(STATS) "compdbg"] -!message *** Doing compdbg -TCL_COMPILE_DEBUG = 1 -!else -TCL_COMPILE_DEBUG = 0 -!endif - -!endif - -#################################################################### -# 8. Parse the CHECKS macro to configure additional compiler checks -# The following macros are set by this section: -# WARNINGS - compiler switches that control the warnings level -# TCL_NO_DEPRECATED - 1 -> disable support for deprecated functions -# 0 -> enable deprecated functions - -# Defaults - Permit deprecated functions and warning level 3 -TCL_NO_DEPRECATED = 0 -WARNINGS = -W3 - -!if "$(CHECKS)" != "" && ![nmakehlp -f "$(CHECKS)" "none"] - -!if [nmakehlp -f $(CHECKS) "nodep"] -!message *** Doing nodep check -TCL_NO_DEPRECATED = 1 -!endif - -!if [nmakehlp -f $(CHECKS) "fullwarn"] -!message *** Doing full warnings check -WARNINGS = -W4 -!if [nmakehlp -l -warn:3 $(LINKER_TESTFLAGS)] -LINKERFLAGS = $(LINKERFLAGS) -warn:3 -!endif -!endif - -!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64] -!message *** Doing 64bit portability warnings -WARNINGS = $(WARNINGS) -Wp64 -!endif - -!endif - -################################################################ -# 9. Extract various version numbers -# For Tcl and Tk, version numbers are extracted from tcl.h and tk.h -# respectively. For extensions, versions are extracted from the -# configure.in or configure.ac from the TEA configuration if it -# exists, and unset otherwise. -# Sets the following macros: -# TCL_MAJOR_VERSION -# TCL_MINOR_VERSION -# TCL_PATCH_LEVEL -# TCL_VERSION -# TK_MAJOR_VERSION -# TK_MINOR_VERSION -# TK_PATCH_LEVEL -# TK_VERSION -# DOTVERSION - set as (for example) 2.5 -# VERSION - set as (for example 25) -#-------------------------------------------------------------- - -!if [echo REM = This file is generated from rules.vc > versions.vc] -!endif -!if [echo TCL_MAJOR_VERSION = \>> versions.vc] \ - && [nmakehlp -V "$(_TCL_H)" TCL_MAJOR_VERSION >> versions.vc] -!endif -!if [echo TCL_MINOR_VERSION = \>> versions.vc] \ - && [nmakehlp -V "$(_TCL_H)" TCL_MINOR_VERSION >> versions.vc] -!endif -!if [echo TCL_PATCH_LEVEL = \>> versions.vc] \ - && [nmakehlp -V "$(_TCL_H)" TCL_PATCH_LEVEL >> versions.vc] -!endif - -!if defined(_TK_H) -!if [echo TK_MAJOR_VERSION = \>> versions.vc] \ - && [nmakehlp -V $(_TK_H) TK_MAJOR_VERSION >> versions.vc] -!endif -!if [echo TK_MINOR_VERSION = \>> versions.vc] \ - && [nmakehlp -V $(_TK_H) TK_MINOR_VERSION >> versions.vc] -!endif -!if [echo TK_PATCH_LEVEL = \>> versions.vc] \ - && [nmakehlp -V $(_TK_H) TK_PATCH_LEVEL >> versions.vc] -!endif -!endif # _TK_H - -!include versions.vc - -TCL_VERSION = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION) -TCL_DOTVERSION = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION) -!if defined(_TK_H) -TK_VERSION = $(TK_MAJOR_VERSION)$(TK_MINOR_VERSION) -TK_DOTVERSION = $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION) -!endif - -# Set DOTVERSION and VERSION -!if $(DOING_TCL) - -DOTVERSION = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION) -VERSION = $(TCL_VERSION) - -!elseif $(DOING_TK) - -DOTVERSION = $(TK_DOTVERSION) -VERSION = $(TK_VERSION) - -!else # Doing a non-Tk extension - -# If parent makefile has not defined DOTVERSION, try to get it from TEA -# first from a configure.in file, and then from configure.ac -!ifndef DOTVERSION -!if [echo DOTVERSION = \> versions.vc] \ - || [nmakehlp -V $(ROOT)\configure.in ^[$(PROJECT)^] >> versions.vc] -!if [echo DOTVERSION = \> versions.vc] \ - || [nmakehlp -V $(ROOT)\configure.ac ^[$(PROJECT)^] >> versions.vc] -!error *** Could not figure out extension version. Please define DOTVERSION in parent makefile before including rules.vc. -!endif -!endif -!include versions.vc -!endif # DOTVERSION -VERSION = $(DOTVERSION:.=) - -!endif # $(DOING_TCL) ... etc. - -################################################################ -# 10. Construct output directory and file paths -# Figure-out how to name our intermediate and output directories. -# In order to avoid inadvertent mixing of object files built using -# different compilers, build configurations etc., -# -# Naming convention (suffixes): -# t = full thread support. -# s = static library (as opposed to an import library) -# g = linked to the debug enabled C run-time. -# x = special static build when it links to the dynamic C run-time. -# -# The following macros are set in this section: -# SUFX - the suffix to use for binaries based on above naming convention -# BUILDDIRTOP - the toplevel default output directory -# is of the form {Release,Debug}[_AMD64][_COMPILERVERSION] -# TMP_DIR - directory where object files are created -# OUT_DIR - directory where output executables are created -# Both TMP_DIR and OUT_DIR are defaulted only if not defined by the -# parent makefile (or command line). The default values are -# based on BUILDDIRTOP. -# STUBPREFIX - name of the stubs library for this project -# PRJIMPLIB - output path of the generated project import library -# PRJLIBNAME - name of generated project library -# PRJLIB - output path of generated project library -# PRJSTUBLIBNAME - name of the generated project stubs library -# PRJSTUBLIB - output path of the generated project stubs library -# RESFILE - output resource file (only if not static build) - -SUFX = tsgx - -!if $(DEBUG) -BUILDDIRTOP = Debug -!else -BUILDDIRTOP = Release -!endif - -!if "$(MACHINE)" != "IX86" -BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE) -!endif -!if $(VCVER) > 6 -BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER) -!endif - -!if !$(DEBUG) || $(DEBUG) && $(UNCHECKED) -SUFX = $(SUFX:g=) -!endif - -TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX - -!if !$(STATIC_BUILD) -TMP_DIRFULL = $(TMP_DIRFULL:Static=) -SUFX = $(SUFX:s=) -EXT = dll -TMP_DIRFULL = $(TMP_DIRFULL:X=) -SUFX = $(SUFX:x=) -!else -TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=) -EXT = lib -!if !$(MSVCRT) -TMP_DIRFULL = $(TMP_DIRFULL:X=) -SUFX = $(SUFX:x=) -!endif -!endif - -!if !$(TCL_THREADS) -TMP_DIRFULL = $(TMP_DIRFULL:Threaded=) -SUFX = $(SUFX:t=) -!endif - -!ifndef TMP_DIR -TMP_DIR = $(TMP_DIRFULL) -!ifndef OUT_DIR -OUT_DIR = .\$(BUILDDIRTOP) -!endif -!else -!ifndef OUT_DIR -OUT_DIR = $(TMP_DIR) -!endif -!endif - -# Relative paths -> absolute -!if [echo OUT_DIR = \> nmakehlp.out] \ - || [nmakehlp -Q "$(OUT_DIR)" >> nmakehlp.out] -!error *** Could not fully qualify path OUT_DIR=$(OUT_DIR) -!endif -!if [echo TMP_DIR = \>> nmakehlp.out] \ - || [nmakehlp -Q "$(TMP_DIR)" >> nmakehlp.out] -!error *** Could not fully qualify path TMP_DIR=$(TMP_DIR) -!endif -!include nmakehlp.out - -# The name of the stubs library for the project being built -STUBPREFIX = $(PROJECT)stub - -# Set up paths to various Tcl executables and libraries needed by extensions -!if $(DOING_TCL) - -TCLSHNAME = $(PROJECT)sh$(TCL_VERSION)$(SUFX).exe -TCLSH = $(OUT_DIR)\$(TCLSHNAME) -TCLIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib -TCLLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) -TCLLIB = $(OUT_DIR)\$(TCLLIBNAME) - -TCLSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib -TCLSTUBLIB = $(OUT_DIR)\$(TCLSTUBLIBNAME) -TCL_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)" - -!else # ! $(DOING_TCL) - -!if $(TCLINSTALL) # Building against an installed Tcl - -TCLSH = $(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe -!if !exist("$(TCLSH)") && $(TCL_THREADS) -TCLSH = $(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe -!endif -TCLSTUBLIB = $(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib -TCLIMPLIB = $(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib -TCL_LIBRARY = $(_TCLDIR)\lib -TCLREGLIB = $(_TCLDIR)\lib\tclreg13$(SUFX:t=).lib -TCLDDELIB = $(_TCLDIR)\lib\tcldde14$(SUFX:t=).lib -TCLTOOLSDIR = \must\have\tcl\sources\to\build\this\target -TCL_INCLUDES = -I"$(_TCLDIR)\include" - -!else # Building against Tcl sources - -TCLSH = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe -!if !exist($(TCLSH)) && $(TCL_THREADS) -TCLSH = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe -!endif -TCLSTUBLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib -TCLIMPLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib -TCL_LIBRARY = $(_TCLDIR)\library -TCLREGLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclreg13$(SUFX:t=).lib -TCLDDELIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tcldde14$(SUFX:t=).lib -TCLTOOLSDIR = $(_TCLDIR)\tools -TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win" - -!endif # TCLINSTALL - -tcllibs = "$(TCLSTUBLIB)" "$(TCLIMPLIB)" - -!endif # $(DOING_TCL) - -# We need a tclsh that will run on the host machine as part of the build. -# IX86 runs on all architectures. -!ifndef TCLSH_NATIVE -!if "$(MACHINE)" == "IX86" || "$(MACHINE)" == "$(NATIVE_ARCH)" -TCLSH_NATIVE = $(TCLSH) -!else -!error You must explicitly set TCLSH_NATIVE for cross-compilation -!endif -!endif - -# Do the same for Tk and Tk extensions that require the Tk libraries -!if $(DOING_TK) || $(NEED_TK) -WISHNAMEPREFIX = wish -WISHNAME = $(WISHNAMEPREFIX)$(TK_VERSION)$(SUFX).exe -TKLIBNAME = $(PROJECT)$(TK_VERSION)$(SUFX).$(EXT) -TKSTUBLIBNAME = tkstub$(TK_VERSION).lib -TKIMPLIBNAME = tk$(TK_VERSION)$(SUFX).lib - -!if $(DOING_TK) -WISH = $(OUT_DIR)\$(WISHNAME) -TKSTUBLIB = $(OUT_DIR)\$(TKSTUBLIBNAME) -TKIMPLIB = $(OUT_DIR)\$(TKIMPLIBNAME) -TKLIB = $(OUT_DIR)\$(TKLIBNAME) -TK_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)" - -!else # effectively NEED_TK - -!if $(TKINSTALL) # Building against installed Tk -WISH = $(_TKDIR)\bin\$(WISHNAME) -TKSTUBLIB = $(_TKDIR)\lib\$(TKSTUBLIBNAME) -TKIMPLIB = $(_TKDIR)\lib\$(TKIMPLIBNAME) -TK_INCLUDES = -I"$(_TKDIR)\include" -!else # Building against Tk sources -WISH = $(_TKDIR)\win\$(BUILDDIRTOP)\$(WISHNAME) -TKSTUBLIB = $(_TKDIR)\win\$(BUILDDIRTOP)\$(TKSTUBLIBNAME) -TKIMPLIB = $(_TKDIR)\win\$(BUILDDIRTOP)\$(TKIMPLIBNAME) -TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib" -!endif # TKINSTALL -tklibs = "$(TKSTUBLIB)" "$(TKIMPLIB)" - -!endif # $(DOING_TK) -!endif # $(DOING_TK) || $(NEED_TK) - -# Various output paths -PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib -PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) -PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) - -PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib -PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) - -# If extension parent makefile has not defined a resource definition file, -# we will generate one from standard template. -!if !$(DOING_TCL) && !$(DOING_TK) && !$(STATIC_BUILD) -!ifdef RCFILE -RESFILE = $(TMP_DIR)\$(RCFILE:.rc=.res) -!else -RESFILE = $(TMP_DIR)\$(PROJECT).res -!endif -!endif - -################################################################### -# 11. Construct the paths for the installation directories -# The following macros get defined in this section: -# LIB_INSTALL_DIR - where libraries should be installed -# BIN_INSTALL_DIR - where the executables should be installed -# DOC_INSTALL_DIR - where documentation should be installed -# SCRIPT_INSTALL_DIR - where scripts should be installed -# INCLUDE_INSTALL_DIR - where C include files should be installed -# DEMO_INSTALL_DIR - where demos should be installed -# PRJ_INSTALL_DIR - where package will be installed (not set for tcl and tk) - -!if $(DOING_TCL) || $(DOING_TK) -LIB_INSTALL_DIR = $(_INSTALLDIR)\lib -BIN_INSTALL_DIR = $(_INSTALLDIR)\bin -DOC_INSTALL_DIR = $(_INSTALLDIR)\doc -!if $(DOING_TCL) -SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\$(PROJECT)$(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION) -!else # DOING_TK -SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\$(PROJECT)$(TK_MAJOR_VERSION).$(TK_MINOR_VERSION) -!endif -DEMO_INSTALL_DIR = $(SCRIPT_INSTALL_DIR)\demos -INCLUDE_INSTALL_DIR = $(_INSTALLDIR)\include - -!else # extension other than Tk - -PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION) -LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR) -BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR) -DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR) -SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR) -DEMO_INSTALL_DIR = $(PRJ_INSTALL_DIR)\demos -INCLUDE_INSTALL_DIR = $(_TCLDIR)\include - -!endif - -################################################################### -# 12. Set up actual options to be passed to the compiler and linker -# Now we have all the information we need, set up the actual flags and -# options that we will pass to the compiler and linker. The main -# makefile should use these in combination with whatever other flags -# and switches are specific to it. -# The following macros are defined, names are for historical compatibility: -# OPTDEFINES - /Dxxx C macro flags based on user-specified OPTS -# COMPILERFLAGS - /Dxxx C macro flags independent of any configuration opttions -# crt - Compiler switch that selects the appropriate C runtime -# cdebug - Compiler switches related to debug AND optimizations -# cwarn - Compiler switches that set warning levels -# cflags - complete compiler switches (subsumes cdebug and cwarn) -# ldebug - Linker switches controlling debug information and optimization -# lflags - complete linker switches (subsumes ldebug) except subsystem type -# dlllflags - complete linker switches to build DLLs (subsumes lflags) -# conlflags - complete linker switches for console program (subsumes lflags) -# guilflags - complete linker switches for GUI program (subsumes lflags) -# baselibs - minimum Windows libraries required. Parent makefile can -# define PRJ_LIBS before including rules.rc if additional libs are needed - -OPTDEFINES = -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS - -!if $(TCL_MEM_DEBUG) -OPTDEFINES = $(OPTDEFINES) -DTCL_MEM_DEBUG -!endif -!if $(TCL_COMPILE_DEBUG) -OPTDEFINES = $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS -!endif -!if $(TCL_THREADS) -OPTDEFINES = $(OPTDEFINES) -DTCL_THREADS=1 -!if $(USE_THREAD_ALLOC) -OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_ALLOC=1 -!endif -!endif -!if $(STATIC_BUILD) -OPTDEFINES = $(OPTDEFINES) -DSTATIC_BUILD -!endif -!if $(TCL_NO_DEPRECATED) -OPTDEFINES = $(OPTDEFINES) -DTCL_NO_DEPRECATED -!endif - -!if $(USE_STUBS) -# Note we do not define USE_TCL_STUBS even when building tk since some -# test targets in tk do not use stubs -!if ! $(DOING_TCL) -USE_STUBS_DEFS = -DUSE_TCL_STUBS -DUSE_TCLOO_STUBS -!if $(NEED_TK) -USE_STUBS_DEFS = $(USE_STUBS_DEFS) -DUSE_TK_STUBS -!endif -!endif -!endif # USE_STUBS - -!if !$(DEBUG) -OPTDEFINES = $(OPTDEFINES) -DNDEBUG -!if $(OPTIMIZING) -OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_OPTIMIZED -!endif -!endif -!if $(PROFILE) -OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_PROFILED -!endif -!if "$(MACHINE)" == "AMD64" -OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DO64BIT -!endif -!if $(VCVERSION) < 1300 -OPTDEFINES = $(OPTDEFINES) -DNO_STRTOI64 -!endif - -# _ATL_XP_TARGETING - Newer SDK's need this to build for XP -COMPILERFLAGS = /D_ATL_XP_TARGETING - -# Following is primarily for the benefit of extensions. Tcl 8.5 builds -# Tcl without /DUNICODE, while 8.6 builds with it defined. When building -# an extension, it is advisable (but not mandated) to use the same Windows -# API as the Tcl build. This is accordingly defaulted below. A particular -# extension can override this by pre-definining USE_WIDECHAR_API. -!ifndef USE_WIDECHAR_API -!if $(TCL_VERSION) > 85 -USE_WIDECHAR_API = 1 -!else -USE_WIDECHAR_API = 0 -!endif -!endif - -!if $(USE_WIDECHAR_API) -COMPILERFLAGS = $(COMPILERFLAGS) /DUNICODE /D_UNICODE -!endif - -# Like the TEA system only set this non empty for non-Tk extensions -# Note: some extensions use PACKAGE_NAME and others use PACKAGE_TCLNAME -# so we pass both -!if !$(DOING_TCL) && !$(DOING_TK) -PKGNAMEFLAGS = -DPACKAGE_NAME="\"$(PRJ_PACKAGE_TCLNAME)\"" \ - -DPACKAGE_TCLNAME="\"$(PRJ_PACKAGE_TCLNAME)\"" \ - -DPACKAGE_VERSION="\"$(DOTVERSION)\"" \ - -DMODULE_SCOPE=extern -!endif - -# crt picks the C run time based on selected OPTS -!if $(MSVCRT) -!if $(DEBUG) && !$(UNCHECKED) -crt = -MDd -!else -crt = -MD -!endif -!else -!if $(DEBUG) && !$(UNCHECKED) -crt = -MTd -!else -crt = -MT -!endif -!endif - -# cdebug includes compiler options for debugging as well as optimization. -!if $(DEBUG) - -# In debugging mode, optimizations need to be disabled -cdebug = -Zi -Od $(DEBUGFLAGS) - -!else - -cdebug = $(OPTIMIZATIONS) -!if $(SYMBOLS) -cdebug = $(cdebug) -Zi -!endif - -!endif # $(DEBUG) - -# cwarn includes default warning levels. -cwarn = $(WARNINGS) - -!if "$(MACHINE)" == "AMD64" -# Disable pointer<->int warnings related to cast between different sizes -# There are a gadzillion of these due to use of ClientData and -# clutter up compiler -# output increasing chance of a real warning getting lost. So disable them. -# Eventually some day, Tcl will be 64-bit clean. -cwarn = $(cwarn) -wd4311 -wd4312 -!endif - -### Common compiler options that are architecture specific -!if "$(MACHINE)" == "ARM" -carch = -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE -!else -carch = -!endif - -!if $(DEBUG) -# Turn warnings into errors -cwarn = $(cwarn) -WX -!endif - -INCLUDES = $(TCL_INCLUDES) $(TK_INCLUDES) $(PRJ_INCLUDES) -!if !$(DOING_TCL) && !$(DOING_TK) -INCLUDES = $(INCLUDES) -I"$(GENERICDIR)" -I"$(WINDIR)" -I"$(COMPATDIR)" -!endif - -# These flags are defined roughly in the order of the pre-reform -# rules.vc/makefile.vc to help visually compare that the pre- and -# post-reform build logs - -# cflags contains generic flags used for building practically all object files -cflags = -nologo -c $(COMPILERFLAGS) $(carch) $(cwarn) -Fp$(TMP_DIR)^\ $(cdebug) - -# appcflags contains $(cflags) and flags for building the application -# object files (e.g. tclsh, or wish) pkgcflags contains $(cflags) plus -# flags used for building shared object files The two differ in the -# BUILD_$(PROJECT) macro which should be defined only for the shared -# library *implementation* and not for its caller interface - -appcflags = $(cflags) $(crt) $(INCLUDES) $(TCL_DEFINES) $(PRJ_DEFINES) $(OPTDEFINES) $(USE_STUBS_DEFS) -appcflags_nostubs = $(cflags) $(crt) $(INCLUDES) $(TCL_DEFINES) $(PRJ_DEFINES) $(OPTDEFINES) -pkgcflags = $(appcflags) $(PKGNAMEFLAGS) -DBUILD_$(PROJECT) -pkgcflags_nostubs = $(appcflags_nostubs) $(PKGNAMEFLAGS) -DBUILD_$(PROJECT) - -# stubscflags contains $(cflags) plus flags used for building a stubs -# library for the package. Note: -DSTATIC_BUILD is defined in -# $(OPTDEFINES) only if the OPTS configuration indicates a static -# library. However the stubs library is ALWAYS static hence included -# here irrespective of the OPTS setting. -# -# TBD - tclvfs has a comment that stubs libs should not be compiled with -GL -# without stating why. Tcl itself compiled stubs libs with this flag. -# so we do not remove it from cflags. -GL may prevent extensions -# compiled with one VC version to fail to link against stubs library -# compiled with another VC version. Check for this and fix accordingly. -stubscflags = $(cflags) $(PKGNAMEFLAGS) $(PRJ_DEFINES) $(OPTDEFINES) -Zl -DSTATIC_BUILD $(INCLUDES) - -# Link flags - -!if $(DEBUG) -ldebug = -debug -debugtype:cv -!else -ldebug = -release -opt:ref -opt:icf,3 -!if $(SYMBOLS) -ldebug = $(ldebug) -debug -debugtype:cv -!endif -!endif - -# Note: Profiling is currently only possible with the Visual Studio Enterprise -!if $(PROFILE) -ldebug= $(ldebug) -profile -!endif - -### Declarations common to all linker versions -lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug) - -!if $(MSVCRT) && !($(DEBUG) && !$(UNCHECKED)) && $(VCVERSION) >= 1900 -lflags = $(lflags) -nodefaultlib:libucrt.lib -!endif - -# Old linkers (Visual C++ 6 in particular) will link for fast loading -# on Win98. Since we do not support Win98 any more, we specify nowin98 -# as recommended for NT and later. However, this is only required by -# IX86 on older compilers and only needed if we are not doing a static build. - -!if "$(MACHINE)" == "IX86" && !$(STATIC_BUILD) -!if [nmakehlp -l -opt:nowin98 $(LINKER_TESTFLAGS)] -# Align sections for PE size savings. -lflags = $(lflags) -opt:nowin98 -!endif -!endif - -dlllflags = $(lflags) -dll -conlflags = $(lflags) -subsystem:console -guilflags = $(lflags) -subsystem:windows - -# Libraries that are required for every image. -# Extensions should define any additional libraries with $(PRJ_LIBS) -winlibs = kernel32.lib advapi32.lib - -!if $(NEED_TK) -winlibs = $(winlibs) gdi32.lib user32.lib uxtheme.lib -!endif - -# Avoid 'unresolved external symbol __security_cookie' errors. -# c.f. http://support.microsoft.com/?id=894573 -!if "$(MACHINE)" == "AMD64" -!if $(VCVERSION) > 1399 && $(VCVERSION) < 1500 -winlibs = $(winlibs) bufferoverflowU.lib -!endif -!endif - -baselibs = $(winlibs) $(PRJ_LIBS) - -!if $(MSVCRT) && !($(DEBUG) && !$(UNCHECKED)) && $(VCVERSION) >= 1900 -baselibs = $(baselibs) ucrt.lib -!endif - -################################################################ -# 13. Define standard commands, common make targets and implicit rules - -CCPKGCMD = $(cc32) $(pkgcflags) -Fo$(TMP_DIR)^\ -CCAPPCMD = $(cc32) $(appcflags) -Fo$(TMP_DIR)^\ -CCSTUBSCMD = $(cc32) $(stubscflags) -Fo$(TMP_DIR)^\ - -LIBCMD = $(lib32) -nologo $(LINKERFLAGS) -out:$@ -DLLCMD = $(link32) $(dlllflags) -out:$@ $(baselibs) $(tcllibs) $(tklibs) - -CONEXECMD = $(link32) $(conlflags) -out:$@ $(baselibs) $(tcllibs) $(tklibs) -GUIEXECMD = $(link32) $(guilflags) -out:$@ $(baselibs) $(tcllibs) $(tklibs) -RESCMD = $(rc32) -fo $@ -r -i "$(GENERICDIR)" -i "$(TMP_DIR)" \ - $(TCL_INCLUDES) \ - -DDEBUG=$(DEBUG) -d UNCHECKED=$(UNCHECKED) \ - -DCOMMAVERSION=$(DOTVERSION:.=,),0 \ - -DDOTVERSION=\"$(DOTVERSION)\" \ - -DVERSION=\"$(VERSION)\" \ - -DSUFX=\"$(SUFX)\" \ - -DPROJECT=\"$(PROJECT)\" \ - -DPRJLIBNAME=\"$(PRJLIBNAME)\" - -!ifndef DEFAULT_BUILD_TARGET -DEFAULT_BUILD_TARGET = $(PROJECT) -!endif - -default-target: $(DEFAULT_BUILD_TARGET) - -default-pkgindex: - @echo package ifneeded $(PRJ_PACKAGE_TCLNAME) $(DOTVERSION) \ - [list load [file join $$dir $(PRJLIBNAME)]] > $(OUT_DIR)\pkgIndex.tcl - -default-pkgindex-tea: - @if exist $(ROOT)\pkgIndex.tcl.in nmakehlp -s << $(ROOT)\pkgIndex.tcl.in > $(OUT_DIR)\pkgIndex.tcl -@PACKAGE_VERSION@ $(DOTVERSION) -@PACKAGE_NAME@ $(PRJ_PACKAGE_TCLNAME) -@PACKAGE_TCLNAME@ $(PRJ_PACKAGE_TCLNAME) -@PKG_LIB_FILE@ $(PRJLIBNAME) -<< - - -default-install: default-install-binaries default-install-libraries - -default-install-binaries: $(PRJLIB) - @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)' - @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)" - @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL - -default-install-libraries: $(OUT_DIR)\pkgIndex.tcl - @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)' - @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)" - @echo Installing package index in '$(SCRIPT_INSTALL_DIR)' - @$(CPY) $(OUT_DIR)\pkgIndex.tcl $(SCRIPT_INSTALL_DIR) - -default-install-stubs: - @echo Installing stubs library to '$(SCRIPT_INSTALL_DIR)' - @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)" - @$(CPY) $(PRJSTUBLIB) "$(SCRIPT_INSTALL_DIR)" >NUL - -default-install-docs-html: - @echo Installing documentation files to '$(DOC_INSTALL_DIR)' - @if not exist "$(DOC_INSTALL_DIR)" mkdir "$(DOC_INSTALL_DIR)" - @if exist $(DOCDIR) for %f in ("$(DOCDIR)\*.html" "$(DOCDIR)\*.css" "$(DOCDIR)\*.png") do @$(COPY) %f "$(DOC_INSTALL_DIR)" - -default-install-docs-n: - @echo Installing documentation files to '$(DOC_INSTALL_DIR)' - @if not exist "$(DOC_INSTALL_DIR)" mkdir "$(DOC_INSTALL_DIR)" - @if exist $(DOCDIR) for %f in ("$(DOCDIR)\*.n") do @$(COPY) %f "$(DOC_INSTALL_DIR)" - -default-install-demos: - @echo Installing demos to '$(DEMO_INSTALL_DIR)' - @if not exist "$(DEMO_INSTALL_DIR)" mkdir "$(DEMO_INSTALL_DIR)" - @if exist $(DEMODIR) $(CPYDIR) "$(DEMODIR)" "$(DEMO_INSTALL_DIR)" - -default-clean: - @echo Cleaning $(TMP_DIR)\* ... - @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) - @echo Cleaning $(WINDIR)\nmakehlp.obj, nmakehlp.exe ... - @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj - @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe - @if exist $(WINDIR)\nmakehlp.out del $(WINDIR)\nmakehlp.out - @echo Cleaning $(WINDIR)\nmhlp-out.txt ... - @if exist $(WINDIR)\nmhlp-out.txt del $(WINDIR)\nmhlp-out.txt - @echo Cleaning $(WINDIR)\_junk.pch ... - @if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch - @echo Cleaning $(WINDIR)\vercl.x, vercl.i ... - @if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x - @if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i - @echo Cleaning $(WINDIR)\versions.vc, version.vc ... - @if exist $(WINDIR)\versions.vc del $(WINDIR)\versions.vc - @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc - -default-hose: default-clean - @echo Hosing $(OUT_DIR)\* ... - @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) - -# Only for backward compatibility -default-distclean: default-hose - -default-setup: - @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) - @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) - -!if "$(TESTPAT)" != "" -TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) -!endif - -default-test: default-setup $(PROJECT) - @set TCLLIBPATH=$(OUT_DIR:\=/) - @if exist $(LIBDIR) for %f in ("$(LIBDIR)\*.tcl") do @$(COPY) %f "$(OUT_DIR)" - cd "$(TESTDIR)" && $(DEBUGGER) $(TCLSH) all.tcl $(TESTFLAGS) - -default-shell: default-setup $(PROJECT) - @set TCLLIBPATH=$(OUT_DIR:\=/) - @if exist $(LIBDIR) for %f in ("$(LIBDIR)\*.tcl") do @$(COPY) %f "$(OUT_DIR)" - $(DEBUGGER) $(TCLSH) - -# Generation of Windows version resource -!ifdef RCFILE - -# Note: don't use $** in below rule because there may be other dependencies -# and only the "master" rc must be passed to the resource compiler -$(TMP_DIR)\$(PROJECT).res: $(RCDIR)\$(PROJECT).rc - $(RESCMD) $(RCDIR)\$(PROJECT).rc - -!else - -# If parent makefile has not defined a resource definition file, -# we will generate one from standard template. -$(TMP_DIR)\$(PROJECT).res: $(TMP_DIR)\$(PROJECT).rc - -$(TMP_DIR)\$(PROJECT).rc: - @$(COPY) << $(TMP_DIR)\$(PROJECT).rc -#include <winver.h> - -VS_VERSION_INFO VERSIONINFO - FILEVERSION COMMAVERSION - PRODUCTVERSION COMMAVERSION - FILEFLAGSMASK 0x3fL -#ifdef DEBUG - FILEFLAGS VS_FF_DEBUG -#else - FILEFLAGS 0x0L -#endif - FILEOS VOS_NT_WINDOWS32 - FILETYPE VFT_DLL - FILESUBTYPE 0x0L -BEGIN - BLOCK "StringFileInfo" - BEGIN - BLOCK "040904b0" - BEGIN - VALUE "FileDescription", "Tcl extension " PROJECT - VALUE "OriginalFilename", PRJLIBNAME - VALUE "FileVersion", DOTVERSION - VALUE "ProductName", "Package " PROJECT " for Tcl" - VALUE "ProductVersion", DOTVERSION - END - END - BLOCK "VarFileInfo" - BEGIN - VALUE "Translation", 0x409, 1200 - END -END - -<< - -!endif # ifdef RCFILE - -!ifndef DISABLE_IMPLICIT_RULES -DISABLE_IMPLICIT_RULES = 0 -!endif - -!if !$(DISABLE_IMPLICIT_RULES) -# Implicit rule definitions - only for building library objects. For stubs and -# main application, the master makefile should define explicit rules. - -{$(ROOT)}.c{$(TMP_DIR)}.obj:: - $(CCPKGCMD) @<< -$< -<< - -{$(WINDIR)}.c{$(TMP_DIR)}.obj:: - $(CCPKGCMD) @<< -$< -<< - -{$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: - $(CCPKGCMD) @<< -$< -<< - -{$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: - $(CCPKGCMD) @<< -$< -<< - -{$(RCDIR)}.rc{$(TMP_DIR)}.res: - $(RESCMD) $< - -{$(WINDIR)}.rc{$(TMP_DIR)}.res: - $(RESCMD) $< - -{$(TMP_DIR)}.rc{$(TMP_DIR)}.res: - $(RESCMD) $< - -.SUFFIXES: -.SUFFIXES:.c .rc - -!endif - -################################################################ -# 14. Sanity check selected options against Tcl build options -# When building an extension, certain configuration options should -# match the ones used when Tcl was built. Here we check and -# warn on a mismatch. -!if ! $(DOING_TCL) - -!if $(TCLINSTALL) # Building against an installed Tcl -!if exist("$(_TCLDIR)\lib\nmake\tcl.nmake") -TCLNMAKECONFIG = "$(_TCLDIR)\lib\nmake\tcl.nmake" -!endif -!else # ! $(TCLINSTALL) - building against Tcl source -!if exist("$(OUT_DIR)\tcl.nmake") -TCLNMAKECONFIG = "$(OUT_DIR)\tcl.nmake" -!endif -!endif # TCLINSTALL - -!if $(CONFIG_CHECK) -!ifdef TCLNMAKECONFIG -!include $(TCLNMAKECONFIG) - -!if defined(CORE_MACHINE) && "$(CORE_MACHINE)" != "$(MACHINE)" -!error ERROR: Build target ($(MACHINE)) does not match the Tcl library architecture ($(CORE_MACHINE)). -!endif -!if defined(CORE_USE_THREAD_ALLOC) && $(CORE_USE_THREAD_ALLOC) != $(USE_THREAD_ALLOC) -!message WARNING: Value of USE_THREAD_ALLOC ($(USE_THREAD_ALLOC)) does not match its Tcl core value ($(CORE_USE_THREAD_ALLOC)). -!endif -!if defined(CORE_DEBUG) && $(CORE_DEBUG) != $(DEBUG) -!message WARNING: Value of DEBUG ($(DEBUG)) does not match its Tcl library configuration ($(DEBUG)). -!endif -!endif - -!endif # TCLNMAKECONFIG - -!endif # ! $(DOING_TCL) - - -#---------------------------------------------------------- -# Display stats being used. -#---------------------------------------------------------- - -!if !$(DOING_TCL) -!message *** Building against Tcl at '$(_TCLDIR)' -!endif -!if !$(DOING_TK) && $(NEED_TK) -!message *** Building against Tk at '$(_TKDIR)' -!endif -!message *** Intermediate directory will be '$(TMP_DIR)' -!message *** Output directory will be '$(OUT_DIR)' -!message *** Installation, if selected, will be in '$(_INSTALLDIR)' -!message *** Suffix for binaries will be '$(SUFX)' -!message *** Compiler version $(VCVER). Target machine is $(MACHINE) -!message *** Host architecture is $(NATIVE_ARCH) - -!endif # ifdef _RULES_VC |