summaryrefslogtreecommitdiffstats
path: root/tcl8.6/pkgs/thread2.8.2/win/rules.vc
diff options
context:
space:
mode:
Diffstat (limited to 'tcl8.6/pkgs/thread2.8.2/win/rules.vc')
-rw-r--r--tcl8.6/pkgs/thread2.8.2/win/rules.vc1723
1 files changed, 0 insertions, 1723 deletions
diff --git a/tcl8.6/pkgs/thread2.8.2/win/rules.vc b/tcl8.6/pkgs/thread2.8.2/win/rules.vc
deleted file mode 100644
index 7fc51c1..0000000
--- a/tcl8.6/pkgs/thread2.8.2/win/rules.vc
+++ /dev/null
@@ -1,1723 +0,0 @@
-#------------------------------------------------------------- -*- makefile -*-
-# rules.vc --
-#
-# Part of the nmake based build system for Tcl and its extensions.
-# This file does all the hard work in terms of parsing build options,
-# compiler switches, defining common targets and macros. The Tcl makefile
-# directly includes this. Extensions include it via "rules-ext.vc".
-#
-# See TIP 477 (https://core.tcl.tk/tips/doc/trunk/tip/477.md) for
-# detailed documentation.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# Copyright (c) 2001-2003 David Gravereaux.
-# Copyright (c) 2003-2008 Patrick Thoyts
-# Copyright (c) 2017 Ashok P. Nadkarni
-#------------------------------------------------------------------------------
-
-!ifndef _RULES_VC
-_RULES_VC = 1
-
-# The following macros define the version of the rules.vc nmake build system
-# For modifications that are not backward-compatible, you *must* change
-# the major version.
-RULES_VERSION_MAJOR = 1
-RULES_VERSION_MINOR = 0
-
-# The PROJECT macro must be defined by parent makefile.
-!if "$(PROJECT)" == ""
-!error *** Error: Macro PROJECT not defined! Please define it before including rules.vc
-!endif
-
-!if "$(PRJ_PACKAGE_TCLNAME)" == ""
-PRJ_PACKAGE_TCLNAME = $(PROJECT)
-!endif
-
-# Also special case Tcl and Tk to save some typing later
-DOING_TCL = 0
-DOING_TK = 0
-!if "$(PROJECT)" == "tcl"
-DOING_TCL = 1
-!elseif "$(PROJECT)" == "tk"
-DOING_TK = 1
-!endif
-
-!ifndef NEED_TK
-# Backwards compatibility
-!ifdef PROJECT_REQUIRES_TK
-NEED_TK = $(PROJECT_REQUIRES_TK)
-!else
-NEED_TK = 0
-!endif
-!endif
-
-!ifndef NEED_TCL_SOURCE
-NEED_TCL_SOURCE = 0
-!endif
-
-!ifdef NEED_TK_SOURCE
-!if $(NEED_TK_SOURCE)
-NEED_TK = 1
-!endif
-!else
-NEED_TK_SOURCE = 0
-!endif
-
-################################################################
-# Nmake is a pretty weak environment in syntax and capabilities
-# so this file is necessarily verbose. It's broken down into
-# the following parts.
-#
-# 0. Sanity check that compiler environment is set up and initialize
-# any built-in settings from the parent makefile
-# 1. First define the external tools used for compiling, copying etc.
-# as this is independent of everything else.
-# 2. Figure out our build structure in terms of the directory, whether
-# we are building Tcl or an extension, etc.
-# 3. Determine the compiler and linker versions
-# 4. Build the nmakehlp helper application
-# 5. Determine the supported compiler options and features
-# 6. Parse the OPTS macro value for user-specified build configuration
-# 7. Parse the STATS macro value for statistics instrumentation
-# 8. Parse the CHECKS macro for additional compilation checks
-# 9. Extract Tcl, and possibly Tk, version numbers from the headers
-# 10. Based on this selected configuration, construct the output
-# directory and file paths
-# 11. Construct the paths where the package is to be installed
-# 12. Set up the actual options passed to compiler and linker based
-# on the information gathered above.
-# 13. Define some standard build targets and implicit rules. These may
-# be optionally disabled by the parent makefile.
-# 14. (For extensions only.) Compare the configuration of the target
-# Tcl and the extensions and warn against discrepancies.
-#
-# One final note about the macro names used. They are as they are
-# for historical reasons. We would like legacy extensions to
-# continue to work with this make include file so be wary of
-# changing them for consistency or clarity.
-
-# 0. Sanity check compiler environment
-
-# Check to see we are configured to build with MSVC (MSDEVDIR, MSVCDIR or
-# VCINSTALLDIR) or with the MS Platform SDK (MSSDK or WindowsSDKDir)
-
-!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
-MSG = ^
-Visual C++ compiler environment not initialized.
-!error $(MSG)
-!endif
-
-# We need to run from the directory the parent makefile is located in.
-# nmake does not tell us what makefile was used to invoke it so parent
-# makefile has to set the MAKEFILEVC macro or we just make a guess and
-# warn if we think that is not the case.
-!if "$(MAKEFILEVC)" == ""
-
-!if exist("$(PROJECT).vc")
-MAKEFILEVC = $(PROJECT).vc
-!elseif exist("makefile.vc")
-MAKEFILEVC = makefile.vc
-!endif
-!endif # "$(MAKEFILEVC)" == ""
-
-!if !exist("$(MAKEFILEVC)")
-MSG = ^
-You must run nmake from the directory containing the project makefile.^
-If you are doing that and getting this message, set the MAKEFILEVC^
-macro to the name of the project makefile.
-!message WARNING: $(MSG)
-!endif
-
-
-################################################################
-# 1. Define external programs being used
-
-#----------------------------------------------------------
-# Set the proper copy method to avoid overwrite questions
-# to the user when copying files and selecting the right
-# "delete all" method.
-#----------------------------------------------------------
-
-RMDIR = rmdir /S /Q
-CPY = xcopy /i /y >NUL
-CPYDIR = xcopy /e /i /y >NUL
-COPY = copy /y >NUL
-MKDIR = mkdir
-
-######################################################################
-# 2. Figure out our build environment in terms of what we're building.
-#
-# (a) Tcl itself
-# (b) Tk
-# (c) a Tcl extension using libraries/includes from an *installed* Tcl
-# (d) a Tcl extension using libraries/includes from Tcl source directory
-#
-# This last is needed because some extensions still need
-# some Tcl interfaces that are not publicly exposed.
-#
-# The fragment will set the following macros:
-# ROOT - root of this module sources
-# COMPATDIR - source directory that holds compatibility sources
-# DOCDIR - source directory containing documentation files
-# GENERICDIR - platform-independent source directory
-# WINDIR - Windows-specific source directory
-# TESTDIR - directory containing test files
-# TOOLSDIR - directory containing build tools
-# _TCLDIR - root of the Tcl installation OR the Tcl sources. Not set
-# when building Tcl itself.
-# _INSTALLDIR - native form of the installation path. For Tcl
-# this will be the root of the Tcl installation. For extensions
-# this will be the lib directory under the root.
-# TCLINSTALL - set to 1 if _TCLDIR refers to
-# headers and libraries from an installed Tcl, and 0 if built against
-# Tcl sources. Not set when building Tcl itself. Yes, not very well
-# named.
-# _TCL_H - native path to the tcl.h file
-#
-# If Tk is involved, also sets the following
-# _TKDIR - native form Tk installation OR Tk source. Not set if building
-# Tk itself.
-# TKINSTALL - set 1 if _TKDIR refers to installed Tk and 0 if Tk sources
-# _TK_H - native path to the tk.h file
-
-# Root directory for sources and assumed subdirectories
-ROOT = $(MAKEDIR)\..
-# The following paths CANNOT have spaces in them as they appear on the
-# left side of implicit rules.
-!ifndef COMPATDIR
-COMPATDIR = $(ROOT)\compat
-!endif
-!ifndef DOCDIR
-DOCDIR = $(ROOT)\doc
-!endif
-!ifndef GENERICDIR
-GENERICDIR = $(ROOT)\generic
-!endif
-!ifndef TOOLSDIR
-TOOLSDIR = $(ROOT)\tools
-!endif
-!ifndef TESTDIR
-TESTDIR = $(ROOT)\tests
-!endif
-!ifndef LIBDIR
-!if exist("$(ROOT)\library")
-LIBDIR = $(ROOT)\library
-!else
-LIBDIR = $(ROOT)\lib
-!endif
-!endif
-!ifndef DEMODIR
-!if exist("$(LIBDIR)\demos")
-DEMODIR = $(LIBDIR)\demos
-!else
-DEMODIR = $(ROOT)\demos
-!endif
-!endif # ifndef DEMODIR
-# Do NOT enclose WINDIR in a !ifndef because Windows always defines
-# WINDIR env var to point to c:\windows!
-# TBD - This is a potentially dangerous conflict, rename WINDIR to
-# something else
-WINDIR = $(ROOT)\win
-
-!ifndef RCDIR
-!if exist("$(WINDIR)\rc")
-RCDIR = $(WINDIR)\rc
-!else
-RCDIR = $(WINDIR)
-!endif
-!endif
-RCDIR = $(RCDIR:/=\)
-
-# The target directory where the built packages and binaries will be installed.
-# INSTALLDIR is the (optional) path specified by the user.
-# _INSTALLDIR is INSTALLDIR using the backslash separator syntax
-!ifdef INSTALLDIR
-### Fix the path separators.
-_INSTALLDIR = $(INSTALLDIR:/=\)
-!else
-### Assume the normal default.
-_INSTALLDIR = $(HOMEDRIVE)\Tcl
-!endif
-
-!if $(DOING_TCL)
-
-# BEGIN Case 2(a) - Building Tcl itself
-
-# Only need to define _TCL_H
-_TCL_H = ..\generic\tcl.h
-
-# END Case 2(a) - Building Tcl itself
-
-!elseif $(DOING_TK)
-
-# BEGIN Case 2(b) - Building Tk
-
-TCLINSTALL = 0 # Tk always builds against Tcl source, not an installed Tcl
-!if "$(TCLDIR)" == ""
-!if [echo TCLDIR = \> nmakehlp.out] \
- || [nmakehlp -L generic\tcl.h >> nmakehlp.out]
-!error *** Could not locate Tcl source directory.
-!endif
-!include nmakehlp.out
-!endif # TCLDIR == ""
-
-_TCLDIR = $(TCLDIR:/=\)
-_TCL_H = $(_TCLDIR)\generic\tcl.h
-!if !exist("$(_TCL_H)")
-!error Could not locate tcl.h. Please set the TCLDIR macro to point to the Tcl *source* directory.
-!endif
-
-_TK_H = ..\generic\tk.h
-
-# END Case 2(b) - Building Tk
-
-!else
-
-# BEGIN Case 2(c) or (d) - Building an extension other than Tk
-
-# If command line has specified Tcl location through TCLDIR, use it
-# else default to the INSTALLDIR setting
-!if "$(TCLDIR)" != ""
-
-_TCLDIR = $(TCLDIR:/=\)
-!if exist("$(_TCLDIR)\include\tcl.h") # Case 2(c) with TCLDIR defined
-TCLINSTALL = 1
-_TCL_H = $(_TCLDIR)\include\tcl.h
-!elseif exist("$(_TCLDIR)\generic\tcl.h") # Case 2(d) with TCLDIR defined
-TCLINSTALL = 0
-_TCL_H = $(_TCLDIR)\generic\tcl.h
-!endif
-
-!else # # Case 2(c) for extensions with TCLDIR undefined
-
-# Need to locate Tcl depending on whether it needs Tcl source or not.
-# If we don't, check the INSTALLDIR for an installed Tcl first
-
-!if exist("$(_INSTALLDIR)\include\tcl.h") && !$(NEED_TCL_SOURCE)
-
-TCLINSTALL = 1
-TCLDIR = $(_INSTALLDIR)\..
-# NOTE: we will be resetting _INSTALLDIR to _INSTALLDIR/lib for extensions
-# later so the \.. accounts for the /lib
-_TCLDIR = $(_INSTALLDIR)\..
-_TCL_H = $(_TCLDIR)\include\tcl.h
-
-!else # exist(...) && ! $(NEED_TCL_SOURCE)
-
-!if [echo _TCLDIR = \> nmakehlp.out] \
- || [nmakehlp -L generic\tcl.h >> nmakehlp.out]
-!error *** Could not locate Tcl source directory.
-!endif
-!include nmakehlp.out
-TCLINSTALL = 0
-TCLDIR = $(_TCLDIR)
-_TCL_H = $(_TCLDIR)\generic\tcl.h
-
-!endif # exist(...) && ! $(NEED_TCL_SOURCE)
-
-!endif # TCLDIR
-
-!ifndef _TCL_H
-MSG =^
-Failed to find tcl.h. The TCLDIR macro is set incorrectly or is not set and default path does not contain tcl.h.
-!error $(MSG)
-!endif
-
-# Now do the same to locate Tk headers and libs if project requires Tk
-!if $(NEED_TK)
-
-!if "$(TKDIR)" != ""
-
-_TKDIR = $(TKDIR:/=\)
-!if exist("$(_TKDIR)\include\tk.h")
-TKINSTALL = 1
-_TK_H = $(_TKDIR)\include\tk.h
-!elseif exist("$(_TKDIR)\generic\tk.h")
-TKINSTALL = 0
-_TK_H = $(_TKDIR)\generic\tk.h
-!endif
-
-!else # TKDIR not defined
-
-# Need to locate Tcl depending on whether it needs Tcl source or not.
-# If we don't, check the INSTALLDIR for an installed Tcl first
-
-!if exist("$(_INSTALLDIR)\include\tk.h") && !$(NEED_TK_SOURCE)
-
-TKINSTALL = 1
-# NOTE: we will be resetting _INSTALLDIR to _INSTALLDIR/lib for extensions
-# later so the \.. accounts for the /lib
-_TKDIR = $(_INSTALLDIR)\..
-_TK_H = $(_TKDIR)\include\tk.h
-TKDIR = $(_TKDIR)
-
-!else # exist("$(_INSTALLDIR)\include\tk.h") && !$(NEED_TK_SOURCE)
-
-!if [echo _TKDIR = \> nmakehlp.out] \
- || [nmakehlp -L generic\tk.h >> nmakehlp.out]
-!error *** Could not locate Tk source directory.
-!endif
-!include nmakehlp.out
-TKINSTALL = 0
-TKDIR = $(_TKDIR)
-_TK_H = $(_TKDIR)\generic\tk.h
-
-!endif # exist("$(_INSTALLDIR)\include\tk.h") && !$(NEED_TK_SOURCE)
-
-!endif # TKDIR
-
-!ifndef _TK_H
-MSG =^
-Failed to find tk.h. The TKDIR macro is set incorrectly or is not set and default path does not contain tk.h.
-!error $(MSG)
-!endif
-
-!endif # NEED_TK
-
-!if $(NEED_TCL_SOURCE) && $(TCLINSTALL)
-MSG = ^
-*** Warning: This extension requires the source distribution of Tcl.^
-*** Please set the TCLDIR macro to point to the Tcl sources.
-!error $(MSG)
-!endif
-
-!if $(NEED_TK_SOURCE)
-!if $(TKINSTALL)
-MSG = ^
-*** Warning: This extension requires the source distribution of Tk.^
-*** Please set the TKDIR macro to point to the Tk sources.
-!error $(MSG)
-!endif
-!endif
-
-
-# If INSTALLDIR set to tcl installation root dir then reset to the
-# lib dir for installing extensions
-!if exist("$(_INSTALLDIR)\include\tcl.h")
-_INSTALLDIR=$(_INSTALLDIR)\lib
-!endif
-
-# END Case 2(c) or (d) - Building an extension
-!endif # if $(DOING_TCL)
-
-################################################################
-# 3. Determine compiler version and architecture
-# In this section, we figure out the compiler version and the
-# architecture for which we are building. This sets the
-# following macros:
-# VCVERSION - the internal compiler version as 1200, 1400, 1910 etc.
-# This is also printed by the compiler in dotted form 19.10 etc.
-# VCVER - the "marketing version", for example Visual C++ 6 for internal
-# compiler version 1200. This is kept only for legacy reasons as it
-# does not make sense for recent Microsoft compilers. Only used for
-# output directory names.
-# ARCH - set to IX86 or AMD64 depending on 32- or 64-bit target
-# NATIVE_ARCH - set to IX86 or AMD64 for the host machine
-# MACHINE - same as $(ARCH) - legacy
-# _VC_MANIFEST_EMBED_{DLL,EXE} - commands for embedding a manifest if needed
-# CFG_ENCODING - set to an character encoding.
-# TBD - this is passed to compiler as TCL_CFGVAL_ENCODING but can't
-# see where it is used
-
-cc32 = $(CC) # built-in default.
-link32 = link
-lib32 = lib
-rc32 = $(RC) # built-in default.
-
-#----------------------------------------------------------------
-# Figure out the compiler architecture and version by writing
-# the C macros to a file, preprocessing them with the C
-# preprocessor and reading back the created file
-
-_HASH=^#
-_VC_MANIFEST_EMBED_EXE=
-_VC_MANIFEST_EMBED_DLL=
-VCVER=0
-!if ![echo VCVERSION=_MSC_VER > vercl.x] \
- && ![echo $(_HASH)if defined(_M_IX86) >> vercl.x] \
- && ![echo ARCH=IX86 >> vercl.x] \
- && ![echo $(_HASH)elif defined(_M_AMD64) >> vercl.x] \
- && ![echo ARCH=AMD64 >> vercl.x] \
- && ![echo $(_HASH)endif >> vercl.x] \
- && ![$(cc32) -nologo -TC -P vercl.x 2>NUL]
-!include vercl.i
-!if $(VCVERSION) < 1900
-!if ![echo VCVER= ^\> vercl.vc] \
- && ![set /a $(VCVERSION) / 100 - 6 >> vercl.vc]
-!include vercl.vc
-!endif
-!else
-# The simple calculation above does not apply to new Visual Studio releases
-# Keep the compiler version in its native form.
-VCVER = $(VCVERSION)
-!endif
-!endif
-
-!if ![del 2>NUL /q/f vercl.x vercl.i vercl.vc]
-!endif
-
-#----------------------------------------------------------------
-# The MACHINE macro is used by legacy makefiles so set it as well
-!ifdef MACHINE
-!if "$(MACHINE)" == "x86"
-!undef MACHINE
-MACHINE = IX86
-!elseif "$(MACHINE)" == "x64"
-!undef MACHINE
-MACHINE = AMD64
-!endif
-!if "$(MACHINE)" != "$(ARCH)"
-!error Specified MACHINE macro $(MACHINE) does not match detected target architecture $(ARCH).
-!endif
-!else
-MACHINE=$(ARCH)
-!endif
-
-#------------------------------------------------------------
-# Figure out the *host* architecture by reading the registry
-
-!if ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i x86]
-NATIVE_ARCH=IX86
-!else
-NATIVE_ARCH=AMD64
-!endif
-
-# Since MSVC8 we must deal with manifest resources.
-!if $(VCVERSION) >= 1400
-_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1
-_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2
-!endif
-
-!ifndef CFG_ENCODING
-CFG_ENCODING = \"cp1252\"
-!endif
-
-################################################################
-# 4. Build the nmakehlp program
-# This is a helper app we need to overcome nmake's limiting
-# environment. We will call out to it to get various bits of
-# information about supported compiler options etc.
-#
-# Tcl itself will always use the nmakehlp.c program which is
-# in its own source. This is the "master" copy and kept updated.
-#
-# Extensions built against an installed Tcl will use the installed
-# copy of Tcl's nmakehlp.c if there is one and their own version
-# otherwise. In the latter case, they would also be using their own
-# rules.vc. Note that older versions of Tcl do not install nmakehlp.c
-# or rules.vc.
-#
-# Extensions built against Tcl sources will use the one from the Tcl source.
-#
-# When building an extension using a sufficiently new version of Tcl,
-# rules-ext.vc will define NMAKEHLPC appropriately to point to the
-# copy of nmakehlp.c to be used.
-
-!ifndef NMAKEHLPC
-# Default to the one in the current directory (the extension's own nmakehlp.c)
-NMAKEHLPC = nmakehlp.c
-
-!if !$(DOING_TCL)
-!if $(TCLINSTALL)
-!if exist("$(_TCLDIR)\lib\nmake\nmakehlp.c")
-NMAKEHLPC = $(_TCLDIR)\lib\nmake\nmakehlp.c
-!endif
-!else # ! $(TCLINSTALL)
-!if exist("$(_TCLDIR)\win\nmakehlp.c")
-NMAKEHLPC = $(_TCLDIR)\win\nmakehlp.c
-!endif
-!endif # $(TCLINSTALL)
-!endif # !$(DOING_TCL)
-
-!endif # NMAKEHLPC
-
-# We always build nmakehlp even if it exists since we do not know
-# what source it was built from.
-!message *** Using $(NMAKEHLPC)
-!if [$(cc32) -nologo "$(NMAKEHLPC)" -link -subsystem:console > nul]
-!endif
-
-################################################################
-# 5. Test for compiler features
-# Visual C++ compiler options have changed over the years. Check
-# which options are supported by the compiler in use.
-#
-# The following macros are set:
-# OPTIMIZATIONS - the compiler flags to be used for optimized builds
-# DEBUGFLAGS - the compiler flags to be used for debug builds
-# LINKERFLAGS - Flags passed to the linker
-#
-# Note that these are the compiler settings *available*, not those
-# that will be *used*. The latter depends on the OPTS macro settings
-# which we have not yet parsed.
-#
-# Also note that some of the flags in OPTIMIZATIONS are not really
-# related to optimization. They are placed there only for legacy reasons
-# as some extensions expect them to be included in that macro.
-
-# -Op improves float consistency. Note only needed for older compilers
-# Newer compilers do not need or support this option.
-!if [nmakehlp -c -Op]
-FPOPTS = -Op
-!endif
-
-# Strict floating point semantics - present in newer compilers in lieu of -Op
-!if [nmakehlp -c -fp:strict]
-FPOPTS = $(FPOPTS) -fp:strict
-!endif
-
-!if "$(MACHINE)" == "IX86"
-### test for pentium errata
-!if [nmakehlp -c -QI0f]
-!message *** Compiler has 'Pentium 0x0f fix'
-FPOPTS = $(FPOPTS) -QI0f
-!else
-!message *** Compiler does not have 'Pentium 0x0f fix'
-!endif
-!endif
-
-### test for optimizations
-# /O2 optimization includes /Og /Oi /Ot /Oy /Ob2 /Gs /GF /Gy as per
-# documentation. Note we do NOT want /Gs as that inserts a _chkstk
-# stack probe at *every* function entry, not just those with more than
-# a page of stack allocation resulting in a performance hit. However,
-# /O2 documentation is misleading as its stack probes are simply the
-# default page size locals allocation probes and not what is implied
-# by an explicit /Gs option.
-
-OPTIMIZATIONS = $(FPOPTS)
-
-!if [nmakehlp -c -O2]
-!message *** Compiler has 'Optimizations'
-OPTIMIZING = 1
-OPTIMIZATIONS = $(OPTIMIZATIONS) -O2
-!else
-# Legacy, really. All modern compilers support this
-!message *** Compiler does not have 'Optimizations'
-OPTIMIZING = 0
-!endif
-
-# Checks for buffer overflows in local arrays
-!if [nmakehlp -c -GS]
-OPTIMIZATIONS = $(OPTIMIZATIONS) -GS
-!endif
-
-# Link time optimization. Note that this option (potentially) makes
-# generated libraries only usable by the specific VC++ version that
-# created it. Requires /LTCG linker option
-!if [nmakehlp -c -GL]
-OPTIMIZATIONS = $(OPTIMIZATIONS) -GL
-CC_GL_OPT_ENABLED = 1
-!else
-# In newer compilers -GL and -YX are incompatible.
-!if [nmakehlp -c -YX]
-OPTIMIZATIONS = $(OPTIMIZATIONS) -YX
-!endif
-!endif # [nmakehlp -c -GL]
-
-DEBUGFLAGS = $(FPOPTS)
-
-# Run time error checks. Not available or valid in a release, non-debug build
-# RTC is for modern compilers, -GZ is legacy
-!if [nmakehlp -c -RTC1]
-DEBUGFLAGS = $(DEBUGFLAGS) -RTC1
-!elseif [nmakehlp -c -GZ]
-DEBUGFLAGS = $(DEBUGFLAGS) -GZ
-!endif
-
-#----------------------------------------------------------------
-# Linker flags
-
-# LINKER_TESTFLAGS are for internal use when we call nmakehlp to test
-# if the linker supports a specific option. Without these flags link will
-# return "LNK1561: entry point must be defined" error compiling from VS-IDE:
-# They are not passed through to the actual application / extension
-# link rules.
-!ifndef LINKER_TESTFLAGS
-LINKER_TESTFLAGS = /DLL /NOENTRY /OUT:nmakehlp.out
-!endif
-
-LINKERFLAGS =
-
-# If compiler has enabled link time optimization, linker must too with -ltcg
-!ifdef CC_GL_OPT_ENABLED
-!if [nmakehlp -l -ltcg $(LINKER_TESTFLAGS)]
-LINKERFLAGS = $(LINKERFLAGS) -ltcg
-!endif
-!endif
-
-########################################################################
-# 6. Parse the OPTS macro to work out the requested build configuration.
-# Based on this, we will construct the actual switches to be passed to the
-# compiler and linker using the macros defined in the previous section.
-# The following macros are defined by this section based on OPTS
-# STATIC_BUILD - 0 -> Tcl is to be built as a shared library
-# 1 -> build as a static library and shell
-# TCL_THREADS - legacy but always 1 on Windows since winsock requires it.
-# DEBUG - 1 -> debug build, 0 -> release builds
-# SYMBOLS - 1 -> generate PDB's, 0 -> no PDB's
-# PROFILE - 1 -> generate profiling info, 0 -> no profiling
-# PGO - 1 -> profile based optimization, 0 -> no
-# MSVCRT - 1 -> link to dynamic C runtime even when building static Tcl build
-# 0 -> link to static C runtime for static Tcl build.
-# Does not impact shared Tcl builds (STATIC_BUILD == 0)
-# TCL_USE_STATIC_PACKAGES - 1 -> statically link the registry and dde extensions
-# in the Tcl shell. 0 -> keep them as shared libraries
-# Does not impact shared Tcl builds.
-# USE_THREAD_ALLOC - 1 -> Use a shared global free pool for allocation.
-# 0 -> Use the non-thread allocator.
-# UNCHECKED - 1 -> when doing a debug build with symbols, use the release
-# C runtime, 0 -> use the debug C runtime.
-# USE_STUBS - 1 -> compile to use stubs interfaces, 0 -> direct linking
-# CONFIG_CHECK - 1 -> check current build configuration against Tcl
-# configuration (ignored for Tcl itself)
-# Further, LINKERFLAGS are modified based on above.
-
-# Default values for all the above
-STATIC_BUILD = 0
-TCL_THREADS = 1
-DEBUG = 0
-SYMBOLS = 0
-PROFILE = 0
-PGO = 0
-MSVCRT = 1
-TCL_USE_STATIC_PACKAGES = 0
-USE_THREAD_ALLOC = 1
-UNCHECKED = 0
-CONFIG_CHECK = 1
-!if $(DOING_TCL)
-USE_STUBS = 0
-!else
-USE_STUBS = 1
-!endif
-
-# If OPTS is not empty AND does not contain "none" which turns off all OPTS
-# set the above macros based on OPTS content
-!if "$(OPTS)" != "" && ![nmakehlp -f "$(OPTS)" "none"]
-
-# OPTS are specified, parse them
-
-!if [nmakehlp -f $(OPTS) "static"]
-!message *** Doing static
-STATIC_BUILD = 1
-!endif
-
-!if [nmakehlp -f $(OPTS) "nostubs"]
-!message *** Not using stubs
-USE_STUBS = 0
-!endif
-
-!if [nmakehlp -f $(OPTS) "nomsvcrt"]
-!message *** Doing nomsvcrt
-MSVCRT = 0
-!else
-!if [nmakehlp -f $(OPTS) "msvcrt"]
-!message *** Doing msvcrt
-MSVCRT = 1
-!else
-!if !$(STATIC_BUILD)
-MSVCRT = 1
-!else
-MSVCRT = 0
-!endif
-!endif
-!endif # [nmakehlp -f $(OPTS) "nomsvcrt"]
-
-!if [nmakehlp -f $(OPTS) "staticpkg"] && $(STATIC_BUILD)
-!message *** Doing staticpkg
-TCL_USE_STATIC_PACKAGES = 1
-!else
-TCL_USE_STATIC_PACKAGES = 0
-!endif
-
-!if [nmakehlp -f $(OPTS) "nothreads"]
-!message *** Compile explicitly for non-threaded tcl
-TCL_THREADS = 0
-USE_THREAD_ALLOC= 0
-!else
-TCL_THREADS = 1
-USE_THREAD_ALLOC= 1
-!endif
-
-!if [nmakehlp -f $(OPTS) "symbols"]
-!message *** Doing symbols
-DEBUG = 1
-!else
-DEBUG = 0
-!endif
-
-!if [nmakehlp -f $(OPTS) "pdbs"]
-!message *** Doing pdbs
-SYMBOLS = 1
-!else
-SYMBOLS = 0
-!endif
-
-!if [nmakehlp -f $(OPTS) "profile"]
-!message *** Doing profile
-PROFILE = 1
-!else
-PROFILE = 0
-!endif
-
-!if [nmakehlp -f $(OPTS) "pgi"]
-!message *** Doing profile guided optimization instrumentation
-PGO = 1
-!elseif [nmakehlp -f $(OPTS) "pgo"]
-!message *** Doing profile guided optimization
-PGO = 2
-!else
-PGO = 0
-!endif
-
-!if [nmakehlp -f $(OPTS) "loimpact"]
-!message *** Warning: ignoring option "loimpact" - deprecated on modern Windows.
-!endif
-
-# TBD - should get rid of this option
-!if [nmakehlp -f $(OPTS) "thrdalloc"]
-!message *** Doing thrdalloc
-USE_THREAD_ALLOC = 1
-!endif
-
-!if [nmakehlp -f $(OPTS) "tclalloc"]
-USE_THREAD_ALLOC = 0
-!endif
-
-!if [nmakehlp -f $(OPTS) "unchecked"]
-!message *** Doing unchecked
-UNCHECKED = 1
-!else
-UNCHECKED = 0
-!endif
-
-!if [nmakehlp -f $(OPTS) "noconfigcheck"]
-CONFIG_CHECK = 1
-!else
-CONFIG_CHECK = 0
-!endif
-
-!endif # "$(OPTS)" != "" && ... parsing of OPTS
-
-# Set linker flags based on above
-
-!if $(PGO) > 1
-!if [nmakehlp -l -ltcg:pgoptimize $(LINKER_TESTFLAGS)]
-LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pgoptimize
-!else
-MSG=^
-This compiler does not support profile guided optimization.
-!error $(MSG)
-!endif
-!elseif $(PGO) > 0
-!if [nmakehlp -l -ltcg:pginstrument $(LINKER_TESTFLAGS)]
-LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pginstrument
-!else
-MSG=^
-This compiler does not support profile guided optimization.
-!error $(MSG)
-!endif
-!endif
-
-################################################################
-# 7. Parse the STATS macro to configure code instrumentation
-# The following macros are set by this section:
-# TCL_MEM_DEBUG - 1 -> enables memory allocation instrumentation
-# 0 -> disables
-# TCL_COMPILE_DEBUG - 1 -> enables byte compiler logging
-# 0 -> disables
-
-# Default both are off
-TCL_MEM_DEBUG = 0
-TCL_COMPILE_DEBUG = 0
-
-!if "$(STATS)" != "" && ![nmakehlp -f "$(STATS)" "none"]
-
-!if [nmakehlp -f $(STATS) "memdbg"]
-!message *** Doing memdbg
-TCL_MEM_DEBUG = 1
-!else
-TCL_MEM_DEBUG = 0
-!endif
-
-!if [nmakehlp -f $(STATS) "compdbg"]
-!message *** Doing compdbg
-TCL_COMPILE_DEBUG = 1
-!else
-TCL_COMPILE_DEBUG = 0
-!endif
-
-!endif
-
-####################################################################
-# 8. Parse the CHECKS macro to configure additional compiler checks
-# The following macros are set by this section:
-# WARNINGS - compiler switches that control the warnings level
-# TCL_NO_DEPRECATED - 1 -> disable support for deprecated functions
-# 0 -> enable deprecated functions
-
-# Defaults - Permit deprecated functions and warning level 3
-TCL_NO_DEPRECATED = 0
-WARNINGS = -W3
-
-!if "$(CHECKS)" != "" && ![nmakehlp -f "$(CHECKS)" "none"]
-
-!if [nmakehlp -f $(CHECKS) "nodep"]
-!message *** Doing nodep check
-TCL_NO_DEPRECATED = 1
-!endif
-
-!if [nmakehlp -f $(CHECKS) "fullwarn"]
-!message *** Doing full warnings check
-WARNINGS = -W4
-!if [nmakehlp -l -warn:3 $(LINKER_TESTFLAGS)]
-LINKERFLAGS = $(LINKERFLAGS) -warn:3
-!endif
-!endif
-
-!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64]
-!message *** Doing 64bit portability warnings
-WARNINGS = $(WARNINGS) -Wp64
-!endif
-
-!endif
-
-################################################################
-# 9. Extract various version numbers
-# For Tcl and Tk, version numbers are extracted from tcl.h and tk.h
-# respectively. For extensions, versions are extracted from the
-# configure.in or configure.ac from the TEA configuration if it
-# exists, and unset otherwise.
-# Sets the following macros:
-# TCL_MAJOR_VERSION
-# TCL_MINOR_VERSION
-# TCL_PATCH_LEVEL
-# TCL_VERSION
-# TK_MAJOR_VERSION
-# TK_MINOR_VERSION
-# TK_PATCH_LEVEL
-# TK_VERSION
-# DOTVERSION - set as (for example) 2.5
-# VERSION - set as (for example 25)
-#--------------------------------------------------------------
-
-!if [echo REM = This file is generated from rules.vc > versions.vc]
-!endif
-!if [echo TCL_MAJOR_VERSION = \>> versions.vc] \
- && [nmakehlp -V "$(_TCL_H)" TCL_MAJOR_VERSION >> versions.vc]
-!endif
-!if [echo TCL_MINOR_VERSION = \>> versions.vc] \
- && [nmakehlp -V "$(_TCL_H)" TCL_MINOR_VERSION >> versions.vc]
-!endif
-!if [echo TCL_PATCH_LEVEL = \>> versions.vc] \
- && [nmakehlp -V "$(_TCL_H)" TCL_PATCH_LEVEL >> versions.vc]
-!endif
-
-!if defined(_TK_H)
-!if [echo TK_MAJOR_VERSION = \>> versions.vc] \
- && [nmakehlp -V $(_TK_H) TK_MAJOR_VERSION >> versions.vc]
-!endif
-!if [echo TK_MINOR_VERSION = \>> versions.vc] \
- && [nmakehlp -V $(_TK_H) TK_MINOR_VERSION >> versions.vc]
-!endif
-!if [echo TK_PATCH_LEVEL = \>> versions.vc] \
- && [nmakehlp -V $(_TK_H) TK_PATCH_LEVEL >> versions.vc]
-!endif
-!endif # _TK_H
-
-!include versions.vc
-
-TCL_VERSION = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION)
-TCL_DOTVERSION = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION)
-!if defined(_TK_H)
-TK_VERSION = $(TK_MAJOR_VERSION)$(TK_MINOR_VERSION)
-TK_DOTVERSION = $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION)
-!endif
-
-# Set DOTVERSION and VERSION
-!if $(DOING_TCL)
-
-DOTVERSION = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION)
-VERSION = $(TCL_VERSION)
-
-!elseif $(DOING_TK)
-
-DOTVERSION = $(TK_DOTVERSION)
-VERSION = $(TK_VERSION)
-
-!else # Doing a non-Tk extension
-
-# If parent makefile has not defined DOTVERSION, try to get it from TEA
-# first from a configure.in file, and then from configure.ac
-!ifndef DOTVERSION
-!if [echo DOTVERSION = \> versions.vc] \
- || [nmakehlp -V $(ROOT)\configure.in ^[$(PROJECT)^] >> versions.vc]
-!if [echo DOTVERSION = \> versions.vc] \
- || [nmakehlp -V $(ROOT)\configure.ac ^[$(PROJECT)^] >> versions.vc]
-!error *** Could not figure out extension version. Please define DOTVERSION in parent makefile before including rules.vc.
-!endif
-!endif
-!include versions.vc
-!endif # DOTVERSION
-VERSION = $(DOTVERSION:.=)
-
-!endif # $(DOING_TCL) ... etc.
-
-################################################################
-# 10. Construct output directory and file paths
-# Figure-out how to name our intermediate and output directories.
-# In order to avoid inadvertent mixing of object files built using
-# different compilers, build configurations etc.,
-#
-# Naming convention (suffixes):
-# t = full thread support.
-# s = static library (as opposed to an import library)
-# g = linked to the debug enabled C run-time.
-# x = special static build when it links to the dynamic C run-time.
-#
-# The following macros are set in this section:
-# SUFX - the suffix to use for binaries based on above naming convention
-# BUILDDIRTOP - the toplevel default output directory
-# is of the form {Release,Debug}[_AMD64][_COMPILERVERSION]
-# TMP_DIR - directory where object files are created
-# OUT_DIR - directory where output executables are created
-# Both TMP_DIR and OUT_DIR are defaulted only if not defined by the
-# parent makefile (or command line). The default values are
-# based on BUILDDIRTOP.
-# STUBPREFIX - name of the stubs library for this project
-# PRJIMPLIB - output path of the generated project import library
-# PRJLIBNAME - name of generated project library
-# PRJLIB - output path of generated project library
-# PRJSTUBLIBNAME - name of the generated project stubs library
-# PRJSTUBLIB - output path of the generated project stubs library
-# RESFILE - output resource file (only if not static build)
-
-SUFX = tsgx
-
-!if $(DEBUG)
-BUILDDIRTOP = Debug
-!else
-BUILDDIRTOP = Release
-!endif
-
-!if "$(MACHINE)" != "IX86"
-BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE)
-!endif
-!if $(VCVER) > 6
-BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER)
-!endif
-
-!if !$(DEBUG) || $(DEBUG) && $(UNCHECKED)
-SUFX = $(SUFX:g=)
-!endif
-
-TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX
-
-!if !$(STATIC_BUILD)
-TMP_DIRFULL = $(TMP_DIRFULL:Static=)
-SUFX = $(SUFX:s=)
-EXT = dll
-TMP_DIRFULL = $(TMP_DIRFULL:X=)
-SUFX = $(SUFX:x=)
-!else
-TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=)
-EXT = lib
-!if !$(MSVCRT)
-TMP_DIRFULL = $(TMP_DIRFULL:X=)
-SUFX = $(SUFX:x=)
-!endif
-!endif
-
-!if !$(TCL_THREADS)
-TMP_DIRFULL = $(TMP_DIRFULL:Threaded=)
-SUFX = $(SUFX:t=)
-!endif
-
-!ifndef TMP_DIR
-TMP_DIR = $(TMP_DIRFULL)
-!ifndef OUT_DIR
-OUT_DIR = .\$(BUILDDIRTOP)
-!endif
-!else
-!ifndef OUT_DIR
-OUT_DIR = $(TMP_DIR)
-!endif
-!endif
-
-# Relative paths -> absolute
-!if [echo OUT_DIR = \> nmakehlp.out] \
- || [nmakehlp -Q "$(OUT_DIR)" >> nmakehlp.out]
-!error *** Could not fully qualify path OUT_DIR=$(OUT_DIR)
-!endif
-!if [echo TMP_DIR = \>> nmakehlp.out] \
- || [nmakehlp -Q "$(TMP_DIR)" >> nmakehlp.out]
-!error *** Could not fully qualify path TMP_DIR=$(TMP_DIR)
-!endif
-!include nmakehlp.out
-
-# The name of the stubs library for the project being built
-STUBPREFIX = $(PROJECT)stub
-
-# Set up paths to various Tcl executables and libraries needed by extensions
-!if $(DOING_TCL)
-
-TCLSHNAME = $(PROJECT)sh$(TCL_VERSION)$(SUFX).exe
-TCLSH = $(OUT_DIR)\$(TCLSHNAME)
-TCLIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
-TCLLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT)
-TCLLIB = $(OUT_DIR)\$(TCLLIBNAME)
-
-TCLSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib
-TCLSTUBLIB = $(OUT_DIR)\$(TCLSTUBLIBNAME)
-TCL_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)"
-
-!else # ! $(DOING_TCL)
-
-!if $(TCLINSTALL) # Building against an installed Tcl
-
-TCLSH = $(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe
-!if !exist("$(TCLSH)") && $(TCL_THREADS)
-TCLSH = $(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe
-!endif
-TCLSTUBLIB = $(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib
-TCLIMPLIB = $(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib
-TCL_LIBRARY = $(_TCLDIR)\lib
-TCLREGLIB = $(_TCLDIR)\lib\tclreg13$(SUFX:t=).lib
-TCLDDELIB = $(_TCLDIR)\lib\tcldde14$(SUFX:t=).lib
-TCLTOOLSDIR = \must\have\tcl\sources\to\build\this\target
-TCL_INCLUDES = -I"$(_TCLDIR)\include"
-
-!else # Building against Tcl sources
-
-TCLSH = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe
-!if !exist($(TCLSH)) && $(TCL_THREADS)
-TCLSH = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe
-!endif
-TCLSTUBLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib
-TCLIMPLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib
-TCL_LIBRARY = $(_TCLDIR)\library
-TCLREGLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclreg13$(SUFX:t=).lib
-TCLDDELIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tcldde14$(SUFX:t=).lib
-TCLTOOLSDIR = $(_TCLDIR)\tools
-TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win"
-
-!endif # TCLINSTALL
-
-tcllibs = "$(TCLSTUBLIB)" "$(TCLIMPLIB)"
-
-!endif # $(DOING_TCL)
-
-# We need a tclsh that will run on the host machine as part of the build.
-# IX86 runs on all architectures.
-!ifndef TCLSH_NATIVE
-!if "$(MACHINE)" == "IX86" || "$(MACHINE)" == "$(NATIVE_ARCH)"
-TCLSH_NATIVE = $(TCLSH)
-!else
-!error You must explicitly set TCLSH_NATIVE for cross-compilation
-!endif
-!endif
-
-# Do the same for Tk and Tk extensions that require the Tk libraries
-!if $(DOING_TK) || $(NEED_TK)
-WISHNAMEPREFIX = wish
-WISHNAME = $(WISHNAMEPREFIX)$(TK_VERSION)$(SUFX).exe
-TKLIBNAME = $(PROJECT)$(TK_VERSION)$(SUFX).$(EXT)
-TKSTUBLIBNAME = tkstub$(TK_VERSION).lib
-TKIMPLIBNAME = tk$(TK_VERSION)$(SUFX).lib
-
-!if $(DOING_TK)
-WISH = $(OUT_DIR)\$(WISHNAME)
-TKSTUBLIB = $(OUT_DIR)\$(TKSTUBLIBNAME)
-TKIMPLIB = $(OUT_DIR)\$(TKIMPLIBNAME)
-TKLIB = $(OUT_DIR)\$(TKLIBNAME)
-TK_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)"
-
-!else # effectively NEED_TK
-
-!if $(TKINSTALL) # Building against installed Tk
-WISH = $(_TKDIR)\bin\$(WISHNAME)
-TKSTUBLIB = $(_TKDIR)\lib\$(TKSTUBLIBNAME)
-TKIMPLIB = $(_TKDIR)\lib\$(TKIMPLIBNAME)
-TK_INCLUDES = -I"$(_TKDIR)\include"
-!else # Building against Tk sources
-WISH = $(_TKDIR)\win\$(BUILDDIRTOP)\$(WISHNAME)
-TKSTUBLIB = $(_TKDIR)\win\$(BUILDDIRTOP)\$(TKSTUBLIBNAME)
-TKIMPLIB = $(_TKDIR)\win\$(BUILDDIRTOP)\$(TKIMPLIBNAME)
-TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib"
-!endif # TKINSTALL
-tklibs = "$(TKSTUBLIB)" "$(TKIMPLIB)"
-
-!endif # $(DOING_TK)
-!endif # $(DOING_TK) || $(NEED_TK)
-
-# Various output paths
-PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
-PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT)
-PRJLIB = $(OUT_DIR)\$(PRJLIBNAME)
-
-PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib
-PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME)
-
-# If extension parent makefile has not defined a resource definition file,
-# we will generate one from standard template.
-!if !$(DOING_TCL) && !$(DOING_TK) && !$(STATIC_BUILD)
-!ifdef RCFILE
-RESFILE = $(TMP_DIR)\$(RCFILE:.rc=.res)
-!else
-RESFILE = $(TMP_DIR)\$(PROJECT).res
-!endif
-!endif
-
-###################################################################
-# 11. Construct the paths for the installation directories
-# The following macros get defined in this section:
-# LIB_INSTALL_DIR - where libraries should be installed
-# BIN_INSTALL_DIR - where the executables should be installed
-# DOC_INSTALL_DIR - where documentation should be installed
-# SCRIPT_INSTALL_DIR - where scripts should be installed
-# INCLUDE_INSTALL_DIR - where C include files should be installed
-# DEMO_INSTALL_DIR - where demos should be installed
-# PRJ_INSTALL_DIR - where package will be installed (not set for tcl and tk)
-
-!if $(DOING_TCL) || $(DOING_TK)
-LIB_INSTALL_DIR = $(_INSTALLDIR)\lib
-BIN_INSTALL_DIR = $(_INSTALLDIR)\bin
-DOC_INSTALL_DIR = $(_INSTALLDIR)\doc
-!if $(DOING_TCL)
-SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\$(PROJECT)$(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION)
-!else # DOING_TK
-SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\$(PROJECT)$(TK_MAJOR_VERSION).$(TK_MINOR_VERSION)
-!endif
-DEMO_INSTALL_DIR = $(SCRIPT_INSTALL_DIR)\demos
-INCLUDE_INSTALL_DIR = $(_INSTALLDIR)\include
-
-!else # extension other than Tk
-
-PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
-LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR)
-BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR)
-DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR)
-SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR)
-DEMO_INSTALL_DIR = $(PRJ_INSTALL_DIR)\demos
-INCLUDE_INSTALL_DIR = $(_TCLDIR)\include
-
-!endif
-
-###################################################################
-# 12. Set up actual options to be passed to the compiler and linker
-# Now we have all the information we need, set up the actual flags and
-# options that we will pass to the compiler and linker. The main
-# makefile should use these in combination with whatever other flags
-# and switches are specific to it.
-# The following macros are defined, names are for historical compatibility:
-# OPTDEFINES - /Dxxx C macro flags based on user-specified OPTS
-# COMPILERFLAGS - /Dxxx C macro flags independent of any configuration opttions
-# crt - Compiler switch that selects the appropriate C runtime
-# cdebug - Compiler switches related to debug AND optimizations
-# cwarn - Compiler switches that set warning levels
-# cflags - complete compiler switches (subsumes cdebug and cwarn)
-# ldebug - Linker switches controlling debug information and optimization
-# lflags - complete linker switches (subsumes ldebug) except subsystem type
-# dlllflags - complete linker switches to build DLLs (subsumes lflags)
-# conlflags - complete linker switches for console program (subsumes lflags)
-# guilflags - complete linker switches for GUI program (subsumes lflags)
-# baselibs - minimum Windows libraries required. Parent makefile can
-# define PRJ_LIBS before including rules.rc if additional libs are needed
-
-OPTDEFINES = -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS
-
-!if $(TCL_MEM_DEBUG)
-OPTDEFINES = $(OPTDEFINES) -DTCL_MEM_DEBUG
-!endif
-!if $(TCL_COMPILE_DEBUG)
-OPTDEFINES = $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
-!endif
-!if $(TCL_THREADS)
-OPTDEFINES = $(OPTDEFINES) -DTCL_THREADS=1
-!if $(USE_THREAD_ALLOC)
-OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_ALLOC=1
-!endif
-!endif
-!if $(STATIC_BUILD)
-OPTDEFINES = $(OPTDEFINES) -DSTATIC_BUILD
-!endif
-!if $(TCL_NO_DEPRECATED)
-OPTDEFINES = $(OPTDEFINES) -DTCL_NO_DEPRECATED
-!endif
-
-!if $(USE_STUBS)
-# Note we do not define USE_TCL_STUBS even when building tk since some
-# test targets in tk do not use stubs
-!if ! $(DOING_TCL)
-USE_STUBS_DEFS = -DUSE_TCL_STUBS -DUSE_TCLOO_STUBS
-!if $(NEED_TK)
-USE_STUBS_DEFS = $(USE_STUBS_DEFS) -DUSE_TK_STUBS
-!endif
-!endif
-!endif # USE_STUBS
-
-!if !$(DEBUG)
-OPTDEFINES = $(OPTDEFINES) -DNDEBUG
-!if $(OPTIMIZING)
-OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_OPTIMIZED
-!endif
-!endif
-!if $(PROFILE)
-OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_PROFILED
-!endif
-!if "$(MACHINE)" == "AMD64"
-OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DO64BIT
-!endif
-!if $(VCVERSION) < 1300
-OPTDEFINES = $(OPTDEFINES) -DNO_STRTOI64
-!endif
-
-# _ATL_XP_TARGETING - Newer SDK's need this to build for XP
-COMPILERFLAGS = /D_ATL_XP_TARGETING
-
-# Following is primarily for the benefit of extensions. Tcl 8.5 builds
-# Tcl without /DUNICODE, while 8.6 builds with it defined. When building
-# an extension, it is advisable (but not mandated) to use the same Windows
-# API as the Tcl build. This is accordingly defaulted below. A particular
-# extension can override this by pre-definining USE_WIDECHAR_API.
-!ifndef USE_WIDECHAR_API
-!if $(TCL_VERSION) > 85
-USE_WIDECHAR_API = 1
-!else
-USE_WIDECHAR_API = 0
-!endif
-!endif
-
-!if $(USE_WIDECHAR_API)
-COMPILERFLAGS = $(COMPILERFLAGS) /DUNICODE /D_UNICODE
-!endif
-
-# Like the TEA system only set this non empty for non-Tk extensions
-# Note: some extensions use PACKAGE_NAME and others use PACKAGE_TCLNAME
-# so we pass both
-!if !$(DOING_TCL) && !$(DOING_TK)
-PKGNAMEFLAGS = -DPACKAGE_NAME="\"$(PRJ_PACKAGE_TCLNAME)\"" \
- -DPACKAGE_TCLNAME="\"$(PRJ_PACKAGE_TCLNAME)\"" \
- -DPACKAGE_VERSION="\"$(DOTVERSION)\"" \
- -DMODULE_SCOPE=extern
-!endif
-
-# crt picks the C run time based on selected OPTS
-!if $(MSVCRT)
-!if $(DEBUG) && !$(UNCHECKED)
-crt = -MDd
-!else
-crt = -MD
-!endif
-!else
-!if $(DEBUG) && !$(UNCHECKED)
-crt = -MTd
-!else
-crt = -MT
-!endif
-!endif
-
-# cdebug includes compiler options for debugging as well as optimization.
-!if $(DEBUG)
-
-# In debugging mode, optimizations need to be disabled
-cdebug = -Zi -Od $(DEBUGFLAGS)
-
-!else
-
-cdebug = $(OPTIMIZATIONS)
-!if $(SYMBOLS)
-cdebug = $(cdebug) -Zi
-!endif
-
-!endif # $(DEBUG)
-
-# cwarn includes default warning levels.
-cwarn = $(WARNINGS)
-
-!if "$(MACHINE)" == "AMD64"
-# Disable pointer<->int warnings related to cast between different sizes
-# There are a gadzillion of these due to use of ClientData and
-# clutter up compiler
-# output increasing chance of a real warning getting lost. So disable them.
-# Eventually some day, Tcl will be 64-bit clean.
-cwarn = $(cwarn) -wd4311 -wd4312
-!endif
-
-### Common compiler options that are architecture specific
-!if "$(MACHINE)" == "ARM"
-carch = -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE
-!else
-carch =
-!endif
-
-!if $(DEBUG)
-# Turn warnings into errors
-cwarn = $(cwarn) -WX
-!endif
-
-INCLUDES = $(TCL_INCLUDES) $(TK_INCLUDES) $(PRJ_INCLUDES)
-!if !$(DOING_TCL) && !$(DOING_TK)
-INCLUDES = $(INCLUDES) -I"$(GENERICDIR)" -I"$(WINDIR)" -I"$(COMPATDIR)"
-!endif
-
-# These flags are defined roughly in the order of the pre-reform
-# rules.vc/makefile.vc to help visually compare that the pre- and
-# post-reform build logs
-
-# cflags contains generic flags used for building practically all object files
-cflags = -nologo -c $(COMPILERFLAGS) $(carch) $(cwarn) -Fp$(TMP_DIR)^\ $(cdebug)
-
-# appcflags contains $(cflags) and flags for building the application
-# object files (e.g. tclsh, or wish) pkgcflags contains $(cflags) plus
-# flags used for building shared object files The two differ in the
-# BUILD_$(PROJECT) macro which should be defined only for the shared
-# library *implementation* and not for its caller interface
-
-appcflags = $(cflags) $(crt) $(INCLUDES) $(TCL_DEFINES) $(PRJ_DEFINES) $(OPTDEFINES) $(USE_STUBS_DEFS)
-appcflags_nostubs = $(cflags) $(crt) $(INCLUDES) $(TCL_DEFINES) $(PRJ_DEFINES) $(OPTDEFINES)
-pkgcflags = $(appcflags) $(PKGNAMEFLAGS) -DBUILD_$(PROJECT)
-pkgcflags_nostubs = $(appcflags_nostubs) $(PKGNAMEFLAGS) -DBUILD_$(PROJECT)
-
-# stubscflags contains $(cflags) plus flags used for building a stubs
-# library for the package. Note: -DSTATIC_BUILD is defined in
-# $(OPTDEFINES) only if the OPTS configuration indicates a static
-# library. However the stubs library is ALWAYS static hence included
-# here irrespective of the OPTS setting.
-#
-# TBD - tclvfs has a comment that stubs libs should not be compiled with -GL
-# without stating why. Tcl itself compiled stubs libs with this flag.
-# so we do not remove it from cflags. -GL may prevent extensions
-# compiled with one VC version to fail to link against stubs library
-# compiled with another VC version. Check for this and fix accordingly.
-stubscflags = $(cflags) $(PKGNAMEFLAGS) $(PRJ_DEFINES) $(OPTDEFINES) -Zl -DSTATIC_BUILD $(INCLUDES)
-
-# Link flags
-
-!if $(DEBUG)
-ldebug = -debug -debugtype:cv
-!else
-ldebug = -release -opt:ref -opt:icf,3
-!if $(SYMBOLS)
-ldebug = $(ldebug) -debug -debugtype:cv
-!endif
-!endif
-
-# Note: Profiling is currently only possible with the Visual Studio Enterprise
-!if $(PROFILE)
-ldebug= $(ldebug) -profile
-!endif
-
-### Declarations common to all linker versions
-lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug)
-
-!if $(MSVCRT) && !($(DEBUG) && !$(UNCHECKED)) && $(VCVERSION) >= 1900
-lflags = $(lflags) -nodefaultlib:libucrt.lib
-!endif
-
-# Old linkers (Visual C++ 6 in particular) will link for fast loading
-# on Win98. Since we do not support Win98 any more, we specify nowin98
-# as recommended for NT and later. However, this is only required by
-# IX86 on older compilers and only needed if we are not doing a static build.
-
-!if "$(MACHINE)" == "IX86" && !$(STATIC_BUILD)
-!if [nmakehlp -l -opt:nowin98 $(LINKER_TESTFLAGS)]
-# Align sections for PE size savings.
-lflags = $(lflags) -opt:nowin98
-!endif
-!endif
-
-dlllflags = $(lflags) -dll
-conlflags = $(lflags) -subsystem:console
-guilflags = $(lflags) -subsystem:windows
-
-# Libraries that are required for every image.
-# Extensions should define any additional libraries with $(PRJ_LIBS)
-winlibs = kernel32.lib advapi32.lib
-
-!if $(NEED_TK)
-winlibs = $(winlibs) gdi32.lib user32.lib uxtheme.lib
-!endif
-
-# Avoid 'unresolved external symbol __security_cookie' errors.
-# c.f. http://support.microsoft.com/?id=894573
-!if "$(MACHINE)" == "AMD64"
-!if $(VCVERSION) > 1399 && $(VCVERSION) < 1500
-winlibs = $(winlibs) bufferoverflowU.lib
-!endif
-!endif
-
-baselibs = $(winlibs) $(PRJ_LIBS)
-
-!if $(MSVCRT) && !($(DEBUG) && !$(UNCHECKED)) && $(VCVERSION) >= 1900
-baselibs = $(baselibs) ucrt.lib
-!endif
-
-################################################################
-# 13. Define standard commands, common make targets and implicit rules
-
-CCPKGCMD = $(cc32) $(pkgcflags) -Fo$(TMP_DIR)^\
-CCAPPCMD = $(cc32) $(appcflags) -Fo$(TMP_DIR)^\
-CCSTUBSCMD = $(cc32) $(stubscflags) -Fo$(TMP_DIR)^\
-
-LIBCMD = $(lib32) -nologo $(LINKERFLAGS) -out:$@
-DLLCMD = $(link32) $(dlllflags) -out:$@ $(baselibs) $(tcllibs) $(tklibs)
-
-CONEXECMD = $(link32) $(conlflags) -out:$@ $(baselibs) $(tcllibs) $(tklibs)
-GUIEXECMD = $(link32) $(guilflags) -out:$@ $(baselibs) $(tcllibs) $(tklibs)
-RESCMD = $(rc32) -fo $@ -r -i "$(GENERICDIR)" -i "$(TMP_DIR)" \
- $(TCL_INCLUDES) \
- -DDEBUG=$(DEBUG) -d UNCHECKED=$(UNCHECKED) \
- -DCOMMAVERSION=$(DOTVERSION:.=,),0 \
- -DDOTVERSION=\"$(DOTVERSION)\" \
- -DVERSION=\"$(VERSION)\" \
- -DSUFX=\"$(SUFX)\" \
- -DPROJECT=\"$(PROJECT)\" \
- -DPRJLIBNAME=\"$(PRJLIBNAME)\"
-
-!ifndef DEFAULT_BUILD_TARGET
-DEFAULT_BUILD_TARGET = $(PROJECT)
-!endif
-
-default-target: $(DEFAULT_BUILD_TARGET)
-
-default-pkgindex:
- @echo package ifneeded $(PRJ_PACKAGE_TCLNAME) $(DOTVERSION) \
- [list load [file join $$dir $(PRJLIBNAME)]] > $(OUT_DIR)\pkgIndex.tcl
-
-default-pkgindex-tea:
- @if exist $(ROOT)\pkgIndex.tcl.in nmakehlp -s << $(ROOT)\pkgIndex.tcl.in > $(OUT_DIR)\pkgIndex.tcl
-@PACKAGE_VERSION@ $(DOTVERSION)
-@PACKAGE_NAME@ $(PRJ_PACKAGE_TCLNAME)
-@PACKAGE_TCLNAME@ $(PRJ_PACKAGE_TCLNAME)
-@PKG_LIB_FILE@ $(PRJLIBNAME)
-<<
-
-
-default-install: default-install-binaries default-install-libraries
-
-default-install-binaries: $(PRJLIB)
- @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
- @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
- @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
-
-default-install-libraries: $(OUT_DIR)\pkgIndex.tcl
- @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
- @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
- @echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
- @$(CPY) $(OUT_DIR)\pkgIndex.tcl $(SCRIPT_INSTALL_DIR)
-
-default-install-stubs:
- @echo Installing stubs library to '$(SCRIPT_INSTALL_DIR)'
- @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
- @$(CPY) $(PRJSTUBLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
-
-default-install-docs-html:
- @echo Installing documentation files to '$(DOC_INSTALL_DIR)'
- @if not exist "$(DOC_INSTALL_DIR)" mkdir "$(DOC_INSTALL_DIR)"
- @if exist $(DOCDIR) for %f in ("$(DOCDIR)\*.html" "$(DOCDIR)\*.css" "$(DOCDIR)\*.png") do @$(COPY) %f "$(DOC_INSTALL_DIR)"
-
-default-install-docs-n:
- @echo Installing documentation files to '$(DOC_INSTALL_DIR)'
- @if not exist "$(DOC_INSTALL_DIR)" mkdir "$(DOC_INSTALL_DIR)"
- @if exist $(DOCDIR) for %f in ("$(DOCDIR)\*.n") do @$(COPY) %f "$(DOC_INSTALL_DIR)"
-
-default-install-demos:
- @echo Installing demos to '$(DEMO_INSTALL_DIR)'
- @if not exist "$(DEMO_INSTALL_DIR)" mkdir "$(DEMO_INSTALL_DIR)"
- @if exist $(DEMODIR) $(CPYDIR) "$(DEMODIR)" "$(DEMO_INSTALL_DIR)"
-
-default-clean:
- @echo Cleaning $(TMP_DIR)\* ...
- @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
- @echo Cleaning $(WINDIR)\nmakehlp.obj, nmakehlp.exe ...
- @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj
- @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
- @if exist $(WINDIR)\nmakehlp.out del $(WINDIR)\nmakehlp.out
- @echo Cleaning $(WINDIR)\nmhlp-out.txt ...
- @if exist $(WINDIR)\nmhlp-out.txt del $(WINDIR)\nmhlp-out.txt
- @echo Cleaning $(WINDIR)\_junk.pch ...
- @if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch
- @echo Cleaning $(WINDIR)\vercl.x, vercl.i ...
- @if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x
- @if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i
- @echo Cleaning $(WINDIR)\versions.vc, version.vc ...
- @if exist $(WINDIR)\versions.vc del $(WINDIR)\versions.vc
- @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
-
-default-hose: default-clean
- @echo Hosing $(OUT_DIR)\* ...
- @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
-
-# Only for backward compatibility
-default-distclean: default-hose
-
-default-setup:
- @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
- @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
-
-!if "$(TESTPAT)" != ""
-TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
-!endif
-
-default-test: default-setup $(PROJECT)
- @set TCLLIBPATH=$(OUT_DIR:\=/)
- @if exist $(LIBDIR) for %f in ("$(LIBDIR)\*.tcl") do @$(COPY) %f "$(OUT_DIR)"
- cd "$(TESTDIR)" && $(DEBUGGER) $(TCLSH) all.tcl $(TESTFLAGS)
-
-default-shell: default-setup $(PROJECT)
- @set TCLLIBPATH=$(OUT_DIR:\=/)
- @if exist $(LIBDIR) for %f in ("$(LIBDIR)\*.tcl") do @$(COPY) %f "$(OUT_DIR)"
- $(DEBUGGER) $(TCLSH)
-
-# Generation of Windows version resource
-!ifdef RCFILE
-
-# Note: don't use $** in below rule because there may be other dependencies
-# and only the "master" rc must be passed to the resource compiler
-$(TMP_DIR)\$(PROJECT).res: $(RCDIR)\$(PROJECT).rc
- $(RESCMD) $(RCDIR)\$(PROJECT).rc
-
-!else
-
-# If parent makefile has not defined a resource definition file,
-# we will generate one from standard template.
-$(TMP_DIR)\$(PROJECT).res: $(TMP_DIR)\$(PROJECT).rc
-
-$(TMP_DIR)\$(PROJECT).rc:
- @$(COPY) << $(TMP_DIR)\$(PROJECT).rc
-#include <winver.h>
-
-VS_VERSION_INFO VERSIONINFO
- FILEVERSION COMMAVERSION
- PRODUCTVERSION COMMAVERSION
- FILEFLAGSMASK 0x3fL
-#ifdef DEBUG
- FILEFLAGS VS_FF_DEBUG
-#else
- FILEFLAGS 0x0L
-#endif
- FILEOS VOS_NT_WINDOWS32
- FILETYPE VFT_DLL
- FILESUBTYPE 0x0L
-BEGIN
- BLOCK "StringFileInfo"
- BEGIN
- BLOCK "040904b0"
- BEGIN
- VALUE "FileDescription", "Tcl extension " PROJECT
- VALUE "OriginalFilename", PRJLIBNAME
- VALUE "FileVersion", DOTVERSION
- VALUE "ProductName", "Package " PROJECT " for Tcl"
- VALUE "ProductVersion", DOTVERSION
- END
- END
- BLOCK "VarFileInfo"
- BEGIN
- VALUE "Translation", 0x409, 1200
- END
-END
-
-<<
-
-!endif # ifdef RCFILE
-
-!ifndef DISABLE_IMPLICIT_RULES
-DISABLE_IMPLICIT_RULES = 0
-!endif
-
-!if !$(DISABLE_IMPLICIT_RULES)
-# Implicit rule definitions - only for building library objects. For stubs and
-# main application, the master makefile should define explicit rules.
-
-{$(ROOT)}.c{$(TMP_DIR)}.obj::
- $(CCPKGCMD) @<<
-$<
-<<
-
-{$(WINDIR)}.c{$(TMP_DIR)}.obj::
- $(CCPKGCMD) @<<
-$<
-<<
-
-{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
- $(CCPKGCMD) @<<
-$<
-<<
-
-{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
- $(CCPKGCMD) @<<
-$<
-<<
-
-{$(RCDIR)}.rc{$(TMP_DIR)}.res:
- $(RESCMD) $<
-
-{$(WINDIR)}.rc{$(TMP_DIR)}.res:
- $(RESCMD) $<
-
-{$(TMP_DIR)}.rc{$(TMP_DIR)}.res:
- $(RESCMD) $<
-
-.SUFFIXES:
-.SUFFIXES:.c .rc
-
-!endif
-
-################################################################
-# 14. Sanity check selected options against Tcl build options
-# When building an extension, certain configuration options should
-# match the ones used when Tcl was built. Here we check and
-# warn on a mismatch.
-!if ! $(DOING_TCL)
-
-!if $(TCLINSTALL) # Building against an installed Tcl
-!if exist("$(_TCLDIR)\lib\nmake\tcl.nmake")
-TCLNMAKECONFIG = "$(_TCLDIR)\lib\nmake\tcl.nmake"
-!endif
-!else # ! $(TCLINSTALL) - building against Tcl source
-!if exist("$(OUT_DIR)\tcl.nmake")
-TCLNMAKECONFIG = "$(OUT_DIR)\tcl.nmake"
-!endif
-!endif # TCLINSTALL
-
-!if $(CONFIG_CHECK)
-!ifdef TCLNMAKECONFIG
-!include $(TCLNMAKECONFIG)
-
-!if defined(CORE_MACHINE) && "$(CORE_MACHINE)" != "$(MACHINE)"
-!error ERROR: Build target ($(MACHINE)) does not match the Tcl library architecture ($(CORE_MACHINE)).
-!endif
-!if defined(CORE_USE_THREAD_ALLOC) && $(CORE_USE_THREAD_ALLOC) != $(USE_THREAD_ALLOC)
-!message WARNING: Value of USE_THREAD_ALLOC ($(USE_THREAD_ALLOC)) does not match its Tcl core value ($(CORE_USE_THREAD_ALLOC)).
-!endif
-!if defined(CORE_DEBUG) && $(CORE_DEBUG) != $(DEBUG)
-!message WARNING: Value of DEBUG ($(DEBUG)) does not match its Tcl library configuration ($(DEBUG)).
-!endif
-!endif
-
-!endif # TCLNMAKECONFIG
-
-!endif # ! $(DOING_TCL)
-
-
-#----------------------------------------------------------
-# Display stats being used.
-#----------------------------------------------------------
-
-!if !$(DOING_TCL)
-!message *** Building against Tcl at '$(_TCLDIR)'
-!endif
-!if !$(DOING_TK) && $(NEED_TK)
-!message *** Building against Tk at '$(_TKDIR)'
-!endif
-!message *** Intermediate directory will be '$(TMP_DIR)'
-!message *** Output directory will be '$(OUT_DIR)'
-!message *** Installation, if selected, will be in '$(_INSTALLDIR)'
-!message *** Suffix for binaries will be '$(SUFX)'
-!message *** Compiler version $(VCVER). Target machine is $(MACHINE)
-!message *** Host architecture is $(NATIVE_ARCH)
-
-!endif # ifdef _RULES_VC
generated by cgit v0.12 at 2024-11-01 15:57:15 (GMT)